#endif
#include "dquote_static.c"
+#ifndef PERL_IN_XSUB_RE
+# include "charclass_invlists.h"
+#endif
#ifdef op
#undef op
#define SCF_SEEN_ACCEPT 0x8000
#define UTF cBOOL(RExC_utf8)
+
+/* The enums for all these are ordered so things work out correctly */
#define LOC (get_regex_charset(RExC_flags) == REGEX_LOCALE_CHARSET)
-#define UNI_SEMANTICS (get_regex_charset(RExC_flags) == REGEX_UNICODE_CHARSET)
#define DEPENDS_SEMANTICS (get_regex_charset(RExC_flags) == REGEX_DEPENDS_CHARSET)
+#define UNI_SEMANTICS (get_regex_charset(RExC_flags) == REGEX_UNICODE_CHARSET)
#define AT_LEAST_UNI_SEMANTICS (get_regex_charset(RExC_flags) >= REGEX_UNICODE_CHARSET)
#define ASCII_RESTRICTED (get_regex_charset(RExC_flags) == REGEX_ASCII_RESTRICTED_CHARSET)
#define MORE_ASCII_RESTRICTED (get_regex_charset(RExC_flags) == REGEX_ASCII_MORE_RESTRICTED_CHARSET)
*(d++) = uv;
*/
-#define TRIE_STORE_REVCHAR \
+#define TRIE_STORE_REVCHAR(val) \
STMT_START { \
if (UTF) { \
- SV *zlopp = newSV(2); \
+ SV *zlopp = newSV(7); /* XXX: optimize me */ \
unsigned char *flrbbbbb = (unsigned char *) SvPVX(zlopp); \
- unsigned const char *const kapow = uvuni_to_utf8(flrbbbbb, uvc & 0xFF); \
+ unsigned const char *const kapow = uvuni_to_utf8(flrbbbbb, val); \
SvCUR_set(zlopp, kapow - flrbbbbb); \
SvPOK_on(zlopp); \
SvUTF8_on(zlopp); \
av_push(revcharmap, zlopp); \
} else { \
- char ooooff = (char)uvc; \
+ char ooooff = (char)val; \
av_push(revcharmap, newSVpvn(&ooooff, 1)); \
} \
} STMT_END
-#define TRIE_READ_CHAR STMT_START { \
- wordlen++; \
- if ( UTF ) { \
- if ( folder ) { \
- if ( foldlen > 0 ) { \
- uvc = utf8n_to_uvuni( scan, UTF8_MAXLEN, &len, uniflags ); \
- foldlen -= len; \
- scan += len; \
- len = 0; \
- } else { \
- len = UTF8SKIP(uc);\
- uvc = to_utf8_fold( uc, foldbuf, &foldlen); \
- foldlen -= UNISKIP( uvc ); \
- scan = foldbuf + UNISKIP( uvc ); \
- } \
- } else { \
- uvc = utf8n_to_uvuni( (const U8*)uc, UTF8_MAXLEN, &len, uniflags);\
- } \
- } else { \
- uvc = (U32)*uc; \
- len = 1; \
- } \
+#define TRIE_READ_CHAR STMT_START { \
+ wordlen++; \
+ if ( UTF ) { \
+ /* if it is UTF then it is either already folded, or does not need folding */ \
+ uvc = utf8n_to_uvuni( (const U8*) uc, UTF8_MAXLEN, &len, uniflags); \
+ } \
+ else if (folder == PL_fold_latin1) { \
+ /* if we use this folder we have to obey unicode rules on latin-1 data */ \
+ if ( foldlen > 0 ) { \
+ uvc = utf8n_to_uvuni( (const U8*) scan, UTF8_MAXLEN, &len, uniflags ); \
+ foldlen -= len; \
+ scan += len; \
+ len = 0; \
+ } else { \
+ len = 1; \
+ uvc = _to_fold_latin1( (U8) *uc, foldbuf, &foldlen, 1); \
+ skiplen = UNISKIP(uvc); \
+ foldlen -= skiplen; \
+ scan = foldbuf + skiplen; \
+ } \
+ } else { \
+ /* raw data, will be folded later if needed */ \
+ uvc = (U32)*uc; \
+ len = 1; \
+ } \
} STMT_END
switch (flags) {
case EXACT: break;
case EXACTFA:
+ case EXACTFU_SS:
+ case EXACTFU_TRICKYFOLD:
case EXACTFU: folder = PL_fold_latin1; break;
case EXACTF: folder = PL_fold; break;
case EXACTFL: folder = PL_fold_locale; break;
- default: Perl_croak( aTHX_ "panic! In trie construction, unknown node type %u", (unsigned) flags );
+ default: Perl_croak( aTHX_ "panic! In trie construction, unknown node type %u %s", (unsigned) flags, PL_reg_name[flags] );
}
trie = (reg_trie_data *) PerlMemShared_calloc( 1, sizeof(reg_trie_data) );
trie->wordcount = word_count;
RExC_rxi->data->data[ data_slot ] = (void*)trie;
trie->charmap = (U16 *) PerlMemShared_calloc( 256, sizeof(U16) );
- if (!(UTF && folder))
+ if (flags == EXACT)
trie->bitmap = (char *) PerlMemShared_calloc( ANYOF_BITMAP_SIZE, 1 );
trie->wordinfo = (reg_trie_wordinfo *) PerlMemShared_calloc(
trie->wordcount+1, sizeof(reg_trie_wordinfo));
const U8 * const e = uc + STR_LEN( noper );
STRLEN foldlen = 0;
U8 foldbuf[ UTF8_MAXBYTES_CASE + 1 ];
+ STRLEN skiplen = 0;
const U8 *scan = (U8*)NULL;
U32 wordlen = 0; /* required init */
STRLEN chars = 0;
trie->minlen= 0;
continue;
}
- if ( set_bit ) /* bitmap only alloced when !(UTF&&Folding) */
+ if ( set_bit ) { /* bitmap only alloced when !(UTF&&Folding) */
TRIE_BITMAP_SET(trie,*uc); /* store the raw first byte
regardless of encoding */
-
+ if (OP( noper ) == EXACTFU_SS) {
+ /* false positives are ok, so just set this */
+ TRIE_BITMAP_SET(trie,0xDF);
+ }
+ }
for ( ; uc < e ; uc += len ) {
TRIE_CHARCOUNT(trie)++;
TRIE_READ_CHAR;
chars++;
if ( uvc < 256 ) {
+ if ( folder ) {
+ U8 folded= folder[ (U8) uvc ];
+ if ( !trie->charmap[ folded ] ) {
+ trie->charmap[ folded ]=( ++trie->uniquecharcount );
+ TRIE_STORE_REVCHAR( folded );
+ }
+ }
if ( !trie->charmap[ uvc ] ) {
trie->charmap[ uvc ]=( ++trie->uniquecharcount );
- if ( folder )
- trie->charmap[ folder[ uvc ] ] = trie->charmap[ uvc ];
- TRIE_STORE_REVCHAR;
+ TRIE_STORE_REVCHAR( uvc );
}
if ( set_bit ) {
/* store the codepoint in the bitmap, and its folded
* equivalent. */
- TRIE_BITMAP_SET(trie,uvc);
+ TRIE_BITMAP_SET(trie, uvc);
/* store the folded codepoint */
- if ( folder ) TRIE_BITMAP_SET(trie,folder[ uvc ]);
+ if ( folder ) TRIE_BITMAP_SET(trie, folder[(U8) uvc ]);
if ( !UTF ) {
/* store first byte of utf8 representation of
if ( !SvTRUE( *svpp ) ) {
sv_setiv( *svpp, ++trie->uniquecharcount );
- TRIE_STORE_REVCHAR;
+ TRIE_STORE_REVCHAR(uvc);
}
}
}
if( cur == first ) {
- trie->minlen=chars;
- trie->maxlen=chars;
+ trie->minlen = chars;
+ trie->maxlen = chars;
} else if (chars < trie->minlen) {
- trie->minlen=chars;
+ trie->minlen = chars;
} else if (chars > trie->maxlen) {
- trie->maxlen=chars;
+ trie->maxlen = chars;
+ }
+ if (OP( noper ) == EXACTFU_SS) {
+ /* XXX: workaround - 'ss' could match "\x{DF}" so minlen could be 1 and not 2*/
+ if (trie->minlen > 1)
+ trie->minlen= 1;
+ }
+ if (OP( noper ) == EXACTFU_TRICKYFOLD) {
+ /* XXX: workround - things like "\x{1FBE}\x{0308}\x{0301}" can match "\x{0390}"
+ * - We assume that any such sequence might match a 2 byte string */
+ if (trie->minlen > 2 )
+ trie->minlen= 2;
}
} /* end first pass */
STRLEN foldlen = 0; /* required init */
U32 wordlen = 0; /* required init */
U8 foldbuf[ UTF8_MAXBYTES_CASE + 1 ];
+ STRLEN skiplen = 0;
if (OP(noper) != NOTHING) {
for ( ; uc < e ; uc += len ) {
STRLEN foldlen = 0; /* required init */
U32 wordlen = 0; /* required init */
+ STRLEN skiplen = 0;
U8 foldbuf[ UTF8_MAXBYTES_CASE + 1 ];
+
if ( OP(noper) != NOTHING ) {
for ( ; uc < e ; uc += len ) {
* the node type of the result is changed to reflect that it contains these
* sequences.
*
- * And *has_exactf_sharp_s is set to indicate if the node is EXACTF and
- * contains LATIN SMALL LETTER SHARP S
+ * And *has_exactf_sharp_s is set to indicate whether or not the node is EXACTF
+ * and contains LATIN SMALL LETTER SHARP S
*
* This is as good a place as any to discuss the design of handling these
* problematic sequences. It's been wrong in Perl for a very long time. There
* those have already been dealt with. These would otherwise be the most
* likely candidates for generating further tricky sequences. In other words,
* Unicode by itself is unlikely to add new ones unless it is for compatibility
- * with pre-existing standards.
+ * with pre-existing standards, and there aren't many of those left.
*
* The previous designs for dealing with these involved assigning a special
* node for them. This approach doesn't work, as evidenced by this example:
- * "\xDFs" =~ /s\xDF/ui
+ * "\xDFs" =~ /s\xDF/ui # Used to fail before these patches
* Both these fold to "sss", but if the pattern is parsed to create a node of
* that would match just the \xDF, it won't be able to handle the case where a
* successful match would have to cross the node's boundary. The new approach
* optimizer doesn't reject these possibilities based on size constraints.
* 2) These sequences are not currently correctly handled by the trie code
* either, so it changes the joined node type to ops that are not handled
- * by trie's, those new ops being EXACTFU_SS and EXACTFU_NO_TRIE.
+ * by trie's, those new ops being EXACTFU_SS and EXACTFU_TRICKYFOLD.
* 3) This is sufficient for the two Greek sequences (described below), but
* the one involving the Sharp s (\xDF) needs more. The node type
* EXACTFU_SS is used for an EXACTFU node that contains at least one "ss"
* takes advantage of this. Generally, an EXACTFish node that is in UTF-8
* is pre-folded by regcomp.c. This saves effort in regex matching.
* However, probably mostly for historical reasons, the pre-folding isn't
- * done for non-UTF8 patterns. The fold possibilities for these are quite
- * simple, except for the sharp s. All the ones that don't involve a
- * UTF-8 target string are members of a fold-pair, and arrays are set up
- * for all of them that quickly find the other member of the pair. It
- * might actually be faster to pre-fold these, but it isn't currently
- * done, except for the sharp s. Code elsewhere in this file makes sure
- * that it gets folded to 'ss', even if the pattern isn't UTF-8. This
- * avoids the issues describe in the next item.
+ * done for non-UTF8 patterns (and it can't be for EXACTF and EXACTFL
+ * nodes, as what they fold to isn't known until runtime.) The fold
+ * possibilities for the non-UTF8 patterns are quite simple, except for
+ * the sharp s. All the ones that don't involve a UTF-8 target string
+ * are members of a fold-pair, and arrays are set up for all of them
+ * that quickly find the other member of the pair. It might actually
+ * be faster to pre-fold these, but it isn't currently done, except for
+ * the sharp s. Code elsewhere in this file makes sure that it gets
+ * folded to 'ss', even if the pattern isn't UTF-8. This avoids the
+ * issues described in the next item.
* 4) A problem remains for the sharp s in EXACTF nodes. Whether it matches
* 'ss' or not is not knowable at compile time. It will match iff the
* target string is in UTF-8, unlike the EXACTFU nodes, where it always
/* Here, all the adjacent mergeable EXACTish nodes have been merged. We
* can now analyze for sequences of problematic code points. (Prior to
* this final joining, sequences could have been split over boundaries, and
- * hence missed). The sequences only happen in folding */
+ * hence missed). The sequences only happen in folding, hence for any
+ * non-EXACT EXACTish node */
if (OP(scan) != EXACT) {
U8 *s;
U8 * s0 = (U8*) STRING(scan);
* This uses an exclusive 'or' to find that bit and then inverts it to
* form a mask, with just a single 0, in the bit position where 'S' and
* 's' differ. */
- const U8 S_or_s_mask = ~ ('S' ^ 's');
+ const U8 S_or_s_mask = (U8) ~ ('S' ^ 's');
const U8 s_masked = 's' & S_or_s_mask;
/* One pass is made over the node's string looking for all the
case 's':
case 'S':
+ /* Current character is an 's' or 'S'. If next one is
+ * as well, we have the dreaded sequence */
if (((*(s+1) & S_or_s_mask) == s_masked)
/* These two node types don't have special handling
* for 'ss' */
* is. (I (khw) think it doesn't matter in regexec.c
* for UTF patterns, but no need to change it */
if (OP(scan) == EXACTFU) {
- OP(scan) = EXACTFU_NO_TRIE;
+ OP(scan) = EXACTFU_TRICKYFOLD;
}
s += 6; /* We already know what this sequence is. Skip
the rest of it */
/* Peephole optimizer: */
DEBUG_STUDYDATA("Peep:", data,depth);
DEBUG_PEEP("Peep",scan,depth);
+
+ /* Its not clear to khw or hv why this is done here, and not in the
+ * clauses that deal with EXACT nodes. khw's guess is that it's
+ * because of a previous design */
JOIN_EXACT(scan,&min_subtract, &has_exactf_sharp_s, 0);
/* Follow the next-chain of the current node and optimize
regnode *first = (regnode *)NULL;
regnode *last = (regnode *)NULL;
regnode *tail = scan;
- U8 optype = 0;
+ U8 trietype = 0;
U32 count=0;
#ifdef DEBUGGING
/*
- step through the branches, cur represents each
- branch, noper is the first thing to be matched
- as part of that branch and noper_next is the
- regnext() of that node. if noper is an EXACT
- and noper_next is the same as scan (our current
- position in the regex) then the EXACT branch is
- a possible optimization target. Once we have
- two or more consecutive such branches we can
- create a trie of the EXACT's contents and stich
- it in place. If the sequence represents all of
- the branches we eliminate the whole thing and
- replace it with a single TRIE. If it is a
- subsequence then we need to stitch it in. This
- means the first branch has to remain, and needs
- to be repointed at the item on the branch chain
- following the last branch optimized. This could
- be either a BRANCH, in which case the
- subsequence is internal, or it could be the
- item following the branch sequence in which
- case the subsequence is at the end.
+ Step through the branches
+ cur represents each branch,
+ noper is the first thing to be matched as part of that branch
+ noper_next is the regnext() of that node.
+
+ We normally handle a case like this /FOO[xyz]|BAR[pqr]/
+ via a "jump trie" but we also support building with NOJUMPTRIE,
+ which restricts the trie logic to structures like /FOO|BAR/.
+
+ If noper is a trieable nodetype then the branch is a possible optimization
+ target. If we are building under NOJUMPTRIE then we require that noper_next
+ is the same as scan (our current position in the regex program).
+
+ Once we have two or more consecutive such branches we can create a
+ trie of the EXACT's contents and stitch it in place into the program.
+
+ If the sequence represents all of the branches in the alternation we
+ replace the entire thing with a single TRIE node.
+
+ Otherwise when it is a subsequence we need to stitch it in place and
+ replace only the relevant branches. This means the first branch has
+ to remain as it is used by the alternation logic, and its next pointer,
+ and needs to be repointed at the item on the branch chain following
+ the last branch we have optimized away.
+
+ This could be either a BRANCH, in which case the subsequence is internal,
+ or it could be the item following the branch sequence in which case the
+ subsequence is at the end (which does not necessarily mean the first node
+ is the start of the alternation).
+
+ TRIE_TYPE(X) is a define which maps the optype to a trietype.
+
+ optype | trietype
+ ----------------+-----------
+ NOTHING | NOTHING
+ EXACT | EXACT
+ EXACTFU | EXACTFU
+ EXACTFU_SS | EXACTFU
+ EXACTFU_TRICKYFOLD | EXACTFU
+ EXACTFA | 0
+
*/
+#define TRIE_TYPE(X) ( ( NOTHING == (X) ) ? NOTHING : \
+ ( EXACT == (X) ) ? EXACT : \
+ ( EXACTFU == (X) || EXACTFU_SS == (X) || EXACTFU_TRICKYFOLD == (X) ) ? EXACTFU : \
+ 0 )
/* dont use tail as the end marker for this traverse */
for ( cur = startbranch ; cur != scan ; cur = regnext( cur ) ) {
regnode * const noper = NEXTOPER( cur );
+ U8 noper_type = OP( noper );
+ U8 noper_trietype = TRIE_TYPE( noper_type );
#if defined(DEBUGGING) || defined(NOJUMPTRIE)
regnode * const noper_next = regnext( noper );
#endif
PerlIO_printf( Perl_debug_log, "(First==%d,Last==%d,Cur==%d)\n",
REG_NODE_NUM(first), REG_NODE_NUM(last), REG_NODE_NUM(cur) );
});
- if ( (((first && optype!=NOTHING) ? OP( noper ) == optype
- : PL_regkind[ OP( noper ) ] == EXACT )
- || OP(noper) == NOTHING )
+
+ /* Is noper a trieable nodetype that can be merged with the
+ * current trie (if there is one)? */
+ if ( noper_trietype
+ &&
+ (
+ /* XXX: Currently we cannot allow a NOTHING node to be the first element
+ * of a TRIEABLE sequence, Otherwise we will overwrite the regop following
+ * the NOTHING with the TRIE regop later on. This is because a NOTHING node
+ * is only one regnode wide, and a TRIE is two regnodes. An example of a
+ * problematic pattern is: "x" =~ /\A(?>(?:(?:)A|B|C?x))\z/
+ * At a later point of time we can somewhat workaround this by handling
+ * NOTHING -> EXACT sequences as generated by /(?:)A|(?:)B/ type patterns,
+ * as we can effectively ignore the NOTHING regop in that case.
+ * This clause, which allows NOTHING to start a sequence is left commented
+ * out as a reference.
+ * - Yves
+
+ ( noper_trietype == NOTHING)
+ || ( trietype == NOTHING )
+ */
+ ( noper_trietype == NOTHING && trietype )
+ || ( trietype == noper_trietype )
+ )
#ifdef NOJUMPTRIE
&& noper_next == tail
#endif
&& count < U16_MAX)
{
+ /* Handle mergable triable node
+ * Either we are the first node in a new trieable sequence,
+ * in which case we do some bookkeeping, otherwise we update
+ * the end pointer. */
count++;
- if ( !first || optype == NOTHING ) {
- if (!first) first = cur;
- optype = OP( noper );
+ if ( !first ) {
+ first = cur;
+ trietype = noper_trietype;
} else {
+ if ( trietype == NOTHING )
+ trietype = noper_trietype;
last = cur;
}
- } else {
-/*
- Currently the trie logic handles case insensitive matching properly only
- when the pattern is UTF-8 and the node is EXACTFU (thus forcing unicode
- semantics).
-
- If/when this is fixed the following define can be swapped
- in below to fully enable trie logic.
-
-#define TRIE_TYPE_IS_SAFE 1
-
-*/
-#define TRIE_TYPE_IS_SAFE ((UTF && optype == EXACTFU) || optype==EXACT)
-
- if ( last && TRIE_TYPE_IS_SAFE ) {
- make_trie( pRExC_state,
- startbranch, first, cur, tail, count,
- optype, depth+1 );
+ } /* end handle mergable triable node */
+ else {
+ /* handle unmergable node -
+ * noper may either be a triable node which can not be tried
+ * together with the current trie, or a non triable node */
+ if ( last ) {
+ /* If last is set and trietype is not NOTHING then we have found
+ * at least two triable branch sequences in a row of a similar
+ * trietype so we can turn them into a trie. If/when we
+ * allow NOTHING to start a trie sequence this condition will be
+ * required, and it isn't expensive so we leave it in for now. */
+ if ( trietype != NOTHING )
+ make_trie( pRExC_state,
+ startbranch, first, cur, tail, count,
+ trietype, depth+1 );
+ last = NULL; /* note: we clear/update first, trietype etc below, so we dont do it here */
}
- if ( PL_regkind[ OP( noper ) ] == EXACT
+ if ( noper_trietype
#ifdef NOJUMPTRIE
&& noper_next == tail
#endif
){
+ /* noper is triable, so we can start a new trie sequence */
count = 1;
first = cur;
- optype = OP( noper );
- } else {
+ trietype = noper_trietype;
+ } else if (first) {
+ /* if we already saw a first but the current node is not triable then we have
+ * to reset the first information. */
count = 0;
first = NULL;
- optype = 0;
+ trietype = 0;
}
- last = NULL;
- }
- }
+ } /* end handle unmergable node */
+ } /* loop over branches */
DEBUG_OPTIMISE_r({
regprop(RExC_rx, mysv, cur);
PerlIO_printf( Perl_debug_log,
"", SvPV_nolen_const( mysv ),REG_NODE_NUM(cur));
});
-
- if ( last && TRIE_TYPE_IS_SAFE ) {
- made= make_trie( pRExC_state, startbranch, first, scan, tail, count, optype, depth+1 );
+ if ( last && trietype != NOTHING ) {
+ /* the last branch of the sequence was part of a trie,
+ * so we have to construct it here outside of the loop
+ */
+ made= make_trie( pRExC_state, startbranch, first, scan, tail, count, trietype, depth+1 );
#ifdef TRIE_STUDY_OPT
if ( ((made == MADE_EXACT_TRIE &&
startbranch == first)
}
}
#endif
- }
- }
+ } /* end if ( last) */
+ } /* TRIE_MAXBUF is non zero */
} /* do trie */
UV uc;
if (UTF) {
const U8 * const s = (U8*)STRING(scan);
+ uc = utf8_to_uvchr_buf(s, s + l, NULL);
l = utf8_length(s, s + l);
- uc = utf8_to_uvchr(s, NULL);
} else {
uc = *((U8*)STRING(scan));
}
}
if (UTF) {
const U8 * const s = (U8 *)STRING(scan);
+ uc = utf8_to_uvchr_buf(s, s + l, NULL);
l = utf8_length(s, s + l);
- uc = utf8_to_uvchr(s, NULL);
}
else if (has_exactf_sharp_s) {
RExC_seen |= REG_SEEN_EXACTF_SHARP_S;
/* Also set the other member of the fold pair. In case
* that unicode semantics is called for at runtime, use
* the full latin1 fold. (Can't do this for locale,
- * because not known until runtime */
+ * because not known until runtime) */
ANYOF_BITMAP_SET(data->start_class, PL_fold_latin1[uc]);
- /* All folds except under /iaa that include s, S, and
- * sharp_s also may include the others */
+ /* All other (EXACTFL handled above) folds except under
+ * /iaa that include s, S, and sharp_s also may include
+ * the others */
if (OP(scan) != EXACTFA) {
if (uc == 's' || uc == 'S') {
ANYOF_BITMAP_SET(data->start_class,
DEBUG_r(if (!PL_colorset) reginitcolors());
+#ifndef PERL_IN_XSUB_RE
+ /* Initialize these here instead of as-needed, as is quick and avoids
+ * having to test them each time otherwise */
+ if (! PL_AboveLatin1) {
+ PL_AboveLatin1 = _new_invlist_C_array(AboveLatin1_invlist);
+ PL_ASCII = _new_invlist_C_array(ASCII_invlist);
+ PL_Latin1 = _new_invlist_C_array(Latin1_invlist);
+
+ PL_L1PosixAlnum = _new_invlist_C_array(L1PosixAlnum_invlist);
+ PL_PosixAlnum = _new_invlist_C_array(PosixAlnum_invlist);
+
+ PL_L1PosixAlpha = _new_invlist_C_array(L1PosixAlpha_invlist);
+ PL_PosixAlpha = _new_invlist_C_array(PosixAlpha_invlist);
+
+ PL_PosixBlank = _new_invlist_C_array(PosixBlank_invlist);
+ PL_XPosixBlank = _new_invlist_C_array(XPosixBlank_invlist);
+
+ PL_L1Cased = _new_invlist_C_array(L1Cased_invlist);
+
+ PL_PosixCntrl = _new_invlist_C_array(PosixCntrl_invlist);
+ PL_XPosixCntrl = _new_invlist_C_array(XPosixCntrl_invlist);
+
+ PL_PosixDigit = _new_invlist_C_array(PosixDigit_invlist);
+
+ PL_L1PosixGraph = _new_invlist_C_array(L1PosixGraph_invlist);
+ PL_PosixGraph = _new_invlist_C_array(PosixGraph_invlist);
+
+ PL_L1PosixAlnum = _new_invlist_C_array(L1PosixAlnum_invlist);
+ PL_PosixAlnum = _new_invlist_C_array(PosixAlnum_invlist);
+
+ PL_L1PosixLower = _new_invlist_C_array(L1PosixLower_invlist);
+ PL_PosixLower = _new_invlist_C_array(PosixLower_invlist);
+
+ PL_L1PosixPrint = _new_invlist_C_array(L1PosixPrint_invlist);
+ PL_PosixPrint = _new_invlist_C_array(PosixPrint_invlist);
+
+ PL_L1PosixPunct = _new_invlist_C_array(L1PosixPunct_invlist);
+ PL_PosixPunct = _new_invlist_C_array(PosixPunct_invlist);
+
+ PL_PerlSpace = _new_invlist_C_array(PerlSpace_invlist);
+ PL_XPerlSpace = _new_invlist_C_array(XPerlSpace_invlist);
+
+ PL_PosixSpace = _new_invlist_C_array(PosixSpace_invlist);
+ PL_XPosixSpace = _new_invlist_C_array(XPosixSpace_invlist);
+
+ PL_L1PosixUpper = _new_invlist_C_array(L1PosixUpper_invlist);
+ PL_PosixUpper = _new_invlist_C_array(PosixUpper_invlist);
+
+ PL_VertSpace = _new_invlist_C_array(VertSpace_invlist);
+
+ PL_PosixWord = _new_invlist_C_array(PosixWord_invlist);
+ PL_L1PosixWord = _new_invlist_C_array(L1PosixWord_invlist);
+
+ PL_PosixXDigit = _new_invlist_C_array(PosixXDigit_invlist);
+ PL_XPosixXDigit = _new_invlist_C_array(XPosixXDigit_invlist);
+ }
+#endif
+
exp = SvPV(pattern, plen);
if (plen == 0) { /* ignore the utf8ness if the pattern is 0 length */
{
I32 t,ml;
+ /* See comments for join_exact for why REG_SEEN_EXACTF_SHARP_S */
if ((RExC_seen & REG_SEEN_EXACTF_SHARP_S)
|| (SvCUR(data.longest_fixed) /* ok to leave SvCUR */
&& data.offset_fixed == data.offset_float_min
Be careful.
*/
longest_fixed_length = CHR_SVLEN(data.longest_fixed);
+
+ /* See comments for join_exact for why REG_SEEN_EXACTF_SHARP_S */
if (! (RExC_seen & REG_SEEN_EXACTF_SHARP_S)
&& (longest_fixed_length
|| (data.flags & SF_FIX_BEFORE_EOL /* Cannot have SEOL and MULTI */
#define INVLIST_LEN_OFFSET 0 /* Number of elements in the inversion list */
#define INVLIST_ITER_OFFSET 1 /* Current iteration position */
-#define INVLIST_ZERO_OFFSET 2 /* 0 or 1; must be last element in header */
+/* This is a combination of a version and data structure type, so that one
+ * being passed in can be validated to be an inversion list of the correct
+ * vintage. When the structure of the header is changed, a new random number
+ * in the range 2**31-1 should be generated and the new() method changed to
+ * insert that at this location. Then, if an auxiliary program doesn't change
+ * correspondingly, it will be discovered immediately */
+#define INVLIST_VERSION_ID_OFFSET 2
+#define INVLIST_VERSION_ID 1064334010
+
+/* For safety, when adding new elements, remember to #undef them at the end of
+ * the inversion list code section */
+
+#define INVLIST_ZERO_OFFSET 3 /* 0 or 1; must be last element in header */
/* The UV at position ZERO contains either 0 or 1. If 0, the inversion list
* contains the code point U+00000, and begins here. If 1, the inversion list
* doesn't contain U+0000, and it begins at the next UV in the array.
* properly */
*get_invlist_zero_addr(new_list) = UV_MAX;
+ *get_invlist_version_id_addr(new_list) = INVLIST_VERSION_ID;
+#if HEADER_LENGTH != 4
+# error Need to regenerate VERSION_ID by running perl -E 'say int(rand 2**31-1)', and then changing the #if to the new length
+#endif
+
return new_list;
}
#endif
+STATIC SV*
+S__new_invlist_C_array(pTHX_ UV* list)
+{
+ /* Return a pointer to a newly constructed inversion list, initialized to
+ * point to <list>, which has to be in the exact correct inversion list
+ * form, including internal fields. Thus this is a dangerous routine that
+ * should not be used in the wrong hands */
+
+ SV* invlist = newSV_type(SVt_PV);
+
+ PERL_ARGS_ASSERT__NEW_INVLIST_C_ARRAY;
+
+ SvPV_set(invlist, (char *) list);
+ SvLEN_set(invlist, 0); /* Means we own the contents, and the system
+ shouldn't touch it */
+ SvCUR_set(invlist, TO_INTERNAL_SIZE(invlist_len(invlist)));
+
+ if (*get_invlist_version_id_addr(invlist) != INVLIST_VERSION_ID) {
+ Perl_croak(aTHX_ "panic: Incorrect version for previously generated inversion list");
+ }
+
+ return invlist;
+}
+
STATIC void
S_invlist_extend(pTHX_ SV* const invlist, const UV new_max)
{
#define ELEMENT_RANGE_MATCHES_INVLIST(i) (! ((i) & 1))
#define PREV_RANGE_MATCHES_INVLIST(i) (! ELEMENT_RANGE_MATCHES_INVLIST(i))
+#define _invlist_union_complement_2nd(a, b, output) _invlist_union_maybe_complement_2nd(a, b, TRUE, output)
+
#ifndef PERL_IN_XSUB_RE
void
Perl__append_range_to_invlist(pTHX_ SV* const invlist, const UV start, const UV end)
return;
}
+
void
-Perl__invlist_union(pTHX_ SV* const a, SV* const b, SV** output)
+Perl__invlist_union_maybe_complement_2nd(pTHX_ SV* const a, SV* const b, bool complement_b, SV** output)
{
/* Take the union of two inversion lists and point <output> to it. *output
* should be defined upon input, and if it points to one of the two lists,
- * the reference count to that list will be decremented.
+ * the reference count to that list will be decremented. The first list,
+ * <a>, may be NULL, in which case a copy of the second list is returned.
+ * If <complement_b> is TRUE, the union is taken of the complement
+ * (inversion) of <b> instead of b itself.
+ *
* The basis for this comes from "Unicode Demystified" Chapter 13 by
* Richard Gillam, published by Addison-Wesley, and explained at some
* length there. The preface says to incorporate its examples into your
*/
UV count = 0;
- PERL_ARGS_ASSERT__INVLIST_UNION;
+ PERL_ARGS_ASSERT__INVLIST_UNION_MAYBE_COMPLEMENT_2ND;
assert(a != b);
/* If either one is empty, the union is the other one */
- len_a = invlist_len(a);
- if (len_a == 0) {
+ if (a == NULL || ((len_a = invlist_len(a)) == 0)) {
if (*output == a) {
- SvREFCNT_dec(a);
+ if (a != NULL) {
+ SvREFCNT_dec(a);
+ }
}
if (*output != b) {
*output = invlist_clone(b);
+ if (complement_b) {
+ _invlist_invert(*output);
+ }
} /* else *output already = b; */
return;
}
if (*output == b) {
SvREFCNT_dec(b);
}
- if (*output != a) {
- *output = invlist_clone(a);
- }
- /* else *output already = a; */
+
+ /* The complement of an empty list is a list that has everything in it,
+ * so the union with <a> includes everything too */
+ if (complement_b) {
+ if (a == *output) {
+ SvREFCNT_dec(a);
+ }
+ *output = _new_invlist(1);
+ _append_range_to_invlist(*output, 0, UV_MAX);
+ }
+ else if (*output != a) {
+ *output = invlist_clone(a);
+ }
+ /* else *output already = a; */
return;
}
array_a = invlist_array(a);
array_b = invlist_array(b);
+ /* If are to take the union of 'a' with the complement of b, set it
+ * up so are looking at b's complement. */
+ if (complement_b) {
+
+ /* To complement, we invert: if the first element is 0, remove it. To
+ * do this, we just pretend the array starts one later, and clear the
+ * flag as we don't have to do anything else later */
+ if (array_b[0] == 0) {
+ array_b++;
+ len_b--;
+ complement_b = FALSE;
+ }
+ else {
+
+ /* But if the first element is not zero, we unshift a 0 before the
+ * array. The data structure reserves a space for that 0 (which
+ * should be a '1' right now), so physical shifting is unneeded,
+ * but temporarily change that element to 0. Before exiting the
+ * routine, we must restore the element to '1' */
+ array_b--;
+ len_b++;
+ array_b[0] = 0;
+ }
+ }
+
/* Size the union for the worst case: that the sets are completely
* disjoint */
u = _new_invlist(len_a + len_b);
SvREFCNT_dec(*output);
}
+ /* If we've changed b, restore it */
+ if (complement_b) {
+ array_b[0] = 1;
+ }
+
*output = u;
return;
}
void
-Perl__invlist_intersection(pTHX_ SV* const a, SV* const b, SV** i)
+Perl__invlist_intersection_maybe_complement_2nd(pTHX_ SV* const a, SV* const b, bool complement_b, SV** i)
{
/* Take the intersection of two inversion lists and point <i> to it. *i
* should be defined upon input, and if it points to one of the two lists,
* the reference count to that list will be decremented.
+ * If <complement_b> is TRUE, the result will be the intersection of <a>
+ * and the complement (or inversion) of <b> instead of <b> directly.
+ *
* The basis for this comes from "Unicode Demystified" Chapter 13 by
* Richard Gillam, published by Addison-Wesley, and explained at some
* length there. The preface says to incorporate its examples into your
*/
UV count = 0;
- PERL_ARGS_ASSERT__INVLIST_INTERSECTION;
+ PERL_ARGS_ASSERT__INVLIST_INTERSECTION_MAYBE_COMPLEMENT_2ND;
assert(a != b);
- /* If either one is empty, the intersection is null */
+ /* Special case if either one is empty */
len_a = invlist_len(a);
if ((len_a == 0) || ((len_b = invlist_len(b)) == 0)) {
- /* If the result is the same as one of the inputs, the input is being
- * overwritten */
+ if (len_a != 0 && complement_b) {
+
+ /* Here, 'a' is not empty, therefore from the above 'if', 'b' must
+ * be empty. Here, also we are using 'b's complement, which hence
+ * must be every possible code point. Thus the intersection is
+ * simply 'a'. */
+ if (*i != a) {
+ *i = invlist_clone(a);
+
+ if (*i == b) {
+ SvREFCNT_dec(b);
+ }
+ }
+ /* else *i is already 'a' */
+ return;
+ }
+
+ /* Here, 'a' or 'b' is empty and not using the complement of 'b'. The
+ * intersection must be empty */
if (*i == a) {
SvREFCNT_dec(a);
}
else if (*i == b) {
SvREFCNT_dec(b);
}
-
*i = _new_invlist(0);
return;
}
array_a = invlist_array(a);
array_b = invlist_array(b);
+ /* If are to take the intersection of 'a' with the complement of b, set it
+ * up so are looking at b's complement. */
+ if (complement_b) {
+
+ /* To complement, we invert: if the first element is 0, remove it. To
+ * do this, we just pretend the array starts one later, and clear the
+ * flag as we don't have to do anything else later */
+ if (array_b[0] == 0) {
+ array_b++;
+ len_b--;
+ complement_b = FALSE;
+ }
+ else {
+
+ /* But if the first element is not zero, we unshift a 0 before the
+ * array. The data structure reserves a space for that 0 (which
+ * should be a '1' right now), so physical shifting is unneeded,
+ * but temporarily change that element to 0. Before exiting the
+ * routine, we must restore the element to '1' */
+ array_b--;
+ len_b++;
+ array_b[0] = 0;
+ }
+ }
+
/* Size the intersection for the worst case: that the intersection ends up
* fragmenting everything to be completely disjoint */
r= _new_invlist(len_a + len_b);
SvREFCNT_dec(*i);
}
+ /* If we've changed b, restore it */
+ if (complement_b) {
+ array_b[0] = 1;
+ }
+
*i = r;
return;
}
return new_invlist;
}
-#ifndef PERL_IN_XSUB_RE
-void
-Perl__invlist_subtract(pTHX_ SV* const a, SV* const b, SV** result)
-{
- /* Point <result> to an inversion list which consists of all elements in
- * <a> that aren't also in <b>. *result should be defined upon input, and
- * if it points to C<b> its reference count will be decremented. */
-
- PERL_ARGS_ASSERT__INVLIST_SUBTRACT;
- assert(a != b);
-
- /* Subtracting nothing retains the original */
- if (invlist_len(b) == 0) {
-
- if (*result == b) {
- SvREFCNT_dec(b);
- }
-
- /* If the result is not to be the same variable as the original, create
- * a copy */
- if (*result != a) {
- *result = invlist_clone(a);
- }
- } else {
- SV *b_copy = invlist_clone(b);
- _invlist_invert(b_copy); /* Everything not in 'b' */
-
- if (*result == b) {
- SvREFCNT_dec(b);
- }
-
- _invlist_intersection(a, b_copy, result); /* Everything in 'a' not in
- 'b' */
- SvREFCNT_dec(b_copy);
- }
-
- return;
-}
-#endif
-
PERL_STATIC_INLINE UV*
S_get_invlist_iter_addr(pTHX_ SV* invlist)
{
return (UV *) (SvPVX(invlist) + (INVLIST_ITER_OFFSET * sizeof (UV)));
}
+PERL_STATIC_INLINE UV*
+S_get_invlist_version_id_addr(pTHX_ SV* invlist)
+{
+ /* Return the address of the UV that contains the version id. */
+
+ PERL_ARGS_ASSERT_GET_INVLIST_VERSION_ID_ADDR;
+
+ return (UV *) (SvPVX(invlist) + (INVLIST_VERSION_ID_OFFSET * sizeof (UV)));
+}
+
PERL_STATIC_INLINE void
S_invlist_iterinit(pTHX_ SV* invlist) /* Initialize iterator for invlist */
{
#undef INVLIST_LEN_OFFSET
#undef INVLIST_ZERO_OFFSET
#undef INVLIST_ITER_OFFSET
+#undef INVLIST_VERSION_ID
/* End of inversion list object */
U32 posflags = 0, negflags = 0;
U32 *flagsp = &posflags;
char has_charset_modifier = '\0';
- regex_charset cs = (RExC_utf8 || RExC_uni_semantics)
- ? REGEX_UNICODE_CHARSET
- : REGEX_DEPENDS_CHARSET;
+ regex_charset cs = get_regex_charset(RExC_flags);
+ if (cs == REGEX_DEPENDS_CHARSET
+ && (RExC_utf8 || RExC_uni_semantics))
+ {
+ cs = REGEX_UNICODE_CHARSET;
+ }
while (*RExC_parse) {
/* && strchr("iogcmsx", *RExC_parse) */
char *s;
STRLEN foldlen;
U8 tmpbuf[UTF8_MAXBYTES_CASE+1], *foldbuf;
- regnode * orig_emit;
U8 node_type;
/* Is this a LATIN LOWER CASE SHARP S in an EXACTFU node? If so,
bool is_exactfu_sharp_s;
ender = 0;
- orig_emit = RExC_emit; /* Save the original output node position in
- case we need to output a different node
- type */
node_type = ((! FOLD) ? EXACT
: (LOC)
? EXACTFL
/* Prime the casefolded buffer. Locale rules, which apply
* only to code points < 256, aren't known until execution,
* so for them, just output the original character using
- * utf8 */
+ * utf8. If we start to fold non-UTF patterns, be sure to
+ * update join_exact() */
if (LOC && ender < 256) {
if (UNI_IS_INVARIANT(ender)) {
*tmpbuf = (U8) ender;
for (foldbuf = tmpbuf;
foldlen;
foldlen -= numlen) {
- ender = utf8_to_uvchr(foldbuf, &numlen);
+
+ /* tmpbuf has been constructed by us, so we
+ * know it is valid utf8 */
+ ender = valid_utf8_to_uvchr(foldbuf, &numlen);
if (numlen > 0) {
const STRLEN unilen = reguni(pRExC_state, ender, s);
s += unilen;
for (foldbuf = tmpbuf;
foldlen;
foldlen -= numlen) {
- ender = utf8_to_uvchr(foldbuf, &numlen);
+ ender = valid_utf8_to_uvchr(foldbuf, &numlen);
if (numlen > 0) {
const STRLEN unilen = reguni(pRExC_state, ender, s);
len += unilen;
}
}
-/* No locale test, and always Unicode semantics, no ignore-case differences */
-#define _C_C_T_NOLOC_(NAME,TEST,WORD) \
-ANYOF_##NAME: \
- for (value = 0; value < 256; value++) \
- if (TEST) \
- stored += set_regclass_bit(pRExC_state, ret, (U8) value, &l1_fold_invlist, &unicode_alternate); \
- yesno = '+'; \
- what = WORD; \
- break; \
-case ANYOF_N##NAME: \
- for (value = 0; value < 256; value++) \
- if (!TEST) \
- stored += set_regclass_bit(pRExC_state, ret, (U8) value, &l1_fold_invlist, &unicode_alternate); \
- yesno = '!'; \
- what = WORD; \
- break
-
-/* Like the above, but there are differences if we are in uni-8-bit or not, so
- * there are two tests passed in, to use depending on that. There aren't any
- * cases where the label is different from the name, so no need for that
- * parameter.
- * Sets 'what' to WORD which is the property name for non-bitmap code points;
- * But, uses FOLD_WORD instead if /i has been selected, to allow a different
- * property name */
-#define _C_C_T_(NAME, TEST_8, TEST_7, WORD, FOLD_WORD) \
-ANYOF_##NAME: \
- if (LOC) ANYOF_CLASS_SET(ret, ANYOF_##NAME); \
- else if (UNI_SEMANTICS) { \
- for (value = 0; value < 256; value++) { \
- if (TEST_8(value)) stored += \
- set_regclass_bit(pRExC_state, ret, (U8) value, &l1_fold_invlist, &unicode_alternate); \
- } \
- } \
- else { \
- for (value = 0; value < 128; value++) { \
- if (TEST_7(UNI_TO_NATIVE(value))) stored += \
- set_regclass_bit(pRExC_state, ret, \
- (U8) UNI_TO_NATIVE(value), &l1_fold_invlist, &unicode_alternate); \
- } \
- } \
- yesno = '+'; \
- if (FOLD) { \
- what = FOLD_WORD; \
- } \
- else { \
- what = WORD; \
- } \
- break; \
-case ANYOF_N##NAME: \
- if (LOC) ANYOF_CLASS_SET(ret, ANYOF_N##NAME); \
- else if (UNI_SEMANTICS) { \
- for (value = 0; value < 256; value++) { \
- if (! TEST_8(value)) stored += \
- set_regclass_bit(pRExC_state, ret, (U8) value, &l1_fold_invlist, &unicode_alternate); \
- } \
- } \
- else { \
- for (value = 0; value < 128; value++) { \
- if (! TEST_7(UNI_TO_NATIVE(value))) stored += set_regclass_bit( \
- pRExC_state, ret, (U8) UNI_TO_NATIVE(value), &l1_fold_invlist, &unicode_alternate); \
- } \
- if (AT_LEAST_ASCII_RESTRICTED) { \
- for (value = 128; value < 256; value++) { \
- stored += set_regclass_bit( \
- pRExC_state, ret, (U8) UNI_TO_NATIVE(value), &l1_fold_invlist, &unicode_alternate); \
- } \
- ANYOF_FLAGS(ret) |= ANYOF_UNICODE_ALL; \
- } \
- else { \
- /* For a non-ut8 target string with DEPENDS semantics, all above \
- * ASCII Latin1 code points match the complement of any of the \
- * classes. But in utf8, they have their Unicode semantics, so \
- * can't just set them in the bitmap, or else regexec.c will think \
- * they matched when they shouldn't. */ \
- ANYOF_FLAGS(ret) |= ANYOF_NON_UTF8_LATIN1_ALL; \
- } \
- } \
- yesno = '!'; \
- if (FOLD) { \
- what = FOLD_WORD; \
- } \
- else { \
- what = WORD; \
- } \
- break
+/* Generate the code to add a full posix character <class> to the bracketed
+ * character class given by <node>. (<node> is needed only under locale rules)
+ * destlist is the inversion list for non-locale rules that this class is
+ * to be added to
+ * sourcelist is the ASCII-range inversion list to add under /a rules
+ * Xsourcelist is the full Unicode range list to use otherwise. */
+#define DO_POSIX(node, class, destlist, sourcelist, Xsourcelist) \
+ if (LOC) { \
+ SV* scratch_list = NULL; \
+ \
+ /* Set this class in the node for runtime matching */ \
+ ANYOF_CLASS_SET(node, class); \
+ \
+ /* For above Latin1 code points, we use the full Unicode range */ \
+ _invlist_intersection(PL_AboveLatin1, \
+ Xsourcelist, \
+ &scratch_list); \
+ /* And set the output to it, adding instead if there already is an \
+ * output. Checking if <destlist> is NULL first saves an extra \
+ * clone. Its reference count will be decremented at the next \
+ * union, etc, or if this is the only instance, at the end of the \
+ * routine */ \
+ if (! destlist) { \
+ destlist = scratch_list; \
+ } \
+ else { \
+ _invlist_union(destlist, scratch_list, &destlist); \
+ SvREFCNT_dec(scratch_list); \
+ } \
+ } \
+ else { \
+ /* For non-locale, just add it to any existing list */ \
+ _invlist_union(destlist, \
+ (AT_LEAST_ASCII_RESTRICTED) \
+ ? sourcelist \
+ : Xsourcelist, \
+ &destlist); \
+ }
+
+/* Like DO_POSIX, but matches the complement of <sourcelist> and <Xsourcelist>.
+ */
+#define DO_N_POSIX(node, class, destlist, sourcelist, Xsourcelist) \
+ if (LOC) { \
+ SV* scratch_list = NULL; \
+ ANYOF_CLASS_SET(node, class); \
+ _invlist_subtract(PL_AboveLatin1, Xsourcelist, &scratch_list); \
+ if (! destlist) { \
+ destlist = scratch_list; \
+ } \
+ else { \
+ _invlist_union(destlist, scratch_list, &destlist); \
+ SvREFCNT_dec(scratch_list); \
+ } \
+ } \
+ else { \
+ _invlist_union_complement_2nd(destlist, \
+ (AT_LEAST_ASCII_RESTRICTED) \
+ ? sourcelist \
+ : Xsourcelist, \
+ &destlist); \
+ /* Under /d, everything in the upper half of the Latin1 range \
+ * matches this complement */ \
+ if (DEPENDS_SEMANTICS) { \
+ ANYOF_FLAGS(node) |= ANYOF_NON_UTF8_LATIN1_ALL; \
+ } \
+ }
+
+/* Generate the code to add a posix character <class> to the bracketed
+ * character class given by <node>. (<node> is needed only under locale rules)
+ * destlist is the inversion list for non-locale rules that this class is
+ * to be added to
+ * sourcelist is the ASCII-range inversion list to add under /a rules
+ * l1_sourcelist is the Latin1 range list to use otherwise.
+ * Xpropertyname is the name to add to <run_time_list> of the property to
+ * specify the code points above Latin1 that will have to be
+ * determined at run-time
+ * run_time_list is a SV* that contains text names of properties that are to
+ * be computed at run time. This concatenates <Xpropertyname>
+ * to it, apppropriately
+ * This is essentially DO_POSIX, but we know only the Latin1 values at compile
+ * time */
+#define DO_POSIX_LATIN1_ONLY_KNOWN(node, class, destlist, sourcelist, \
+ l1_sourcelist, Xpropertyname, run_time_list) \
+ /* If not /a matching, there are going to be code points we will have \
+ * to defer to runtime to look-up */ \
+ if (! AT_LEAST_ASCII_RESTRICTED) { \
+ Perl_sv_catpvf(aTHX_ run_time_list, "+utf8::%s\n", Xpropertyname); \
+ } \
+ if (LOC) { \
+ ANYOF_CLASS_SET(node, class); \
+ } \
+ else { \
+ _invlist_union(destlist, \
+ (AT_LEAST_ASCII_RESTRICTED) \
+ ? sourcelist \
+ : l1_sourcelist, \
+ &destlist); \
+ }
+
+/* Like DO_POSIX_LATIN1_ONLY_KNOWN, but for the complement. A combination of
+ * this and DO_N_POSIX */
+#define DO_N_POSIX_LATIN1_ONLY_KNOWN(node, class, destlist, sourcelist, \
+ l1_sourcelist, Xpropertyname, run_time_list) \
+ if (AT_LEAST_ASCII_RESTRICTED) { \
+ _invlist_union_complement_2nd(destlist, sourcelist, &destlist); \
+ } \
+ else { \
+ Perl_sv_catpvf(aTHX_ run_time_list, "!utf8::%s\n", Xpropertyname); \
+ if (LOC) { \
+ ANYOF_CLASS_SET(node, namedclass); \
+ } \
+ else { \
+ SV* scratch_list = NULL; \
+ _invlist_subtract(PL_Latin1, l1_sourcelist, &scratch_list); \
+ if (! destlist) { \
+ destlist = scratch_list; \
+ } \
+ else { \
+ _invlist_union(destlist, scratch_list, &destlist); \
+ SvREFCNT_dec(scratch_list); \
+ } \
+ if (DEPENDS_SEMANTICS) { \
+ ANYOF_FLAGS(node) |= ANYOF_NON_UTF8_LATIN1_ALL; \
+ } \
+ } \
+ }
STATIC U8
S_set_regclass_bit_fold(pTHX_ RExC_state_t *pRExC_state, regnode* node, const U8 value, SV** invlist_ptr, AV** alternate_ptr)
/* Invert if asking for the complement */
if (value == 'P') {
-
- /* Add to any existing list */
- if (! properties) {
- properties = invlist_clone(invlist);
- _invlist_invert(properties);
- }
- else {
- invlist = invlist_clone(invlist);
- _invlist_invert(invlist);
- _invlist_union(properties, invlist, &properties);
- SvREFCNT_dec(invlist);
- }
+ _invlist_union_complement_2nd(properties, invlist, &properties);
/* The swash can't be used as-is, because we've
* inverted things; delay removing it to here after
swash = NULL;
}
else {
- if (! properties) {
- properties = invlist_clone(invlist);
- }
- else {
- _invlist_union(properties, invlist, &properties);
- }
+ _invlist_union(properties, invlist, &properties);
}
}
Safefree(name);
}
if (!SIZE_ONLY) {
- const char *what = NULL;
- char yesno = 0;
/* Possible truncation here but in some 64-bit environments
* the compiler gets heartburn about switch on 64-bit values.
* A similar issue a little earlier when switching on value.
* --jhi */
switch ((I32)namedclass) {
-
- case _C_C_T_(ALNUMC, isALNUMC_L1, isALNUMC, "XPosixAlnum", "XPosixAlnum");
- case _C_C_T_(ALPHA, isALPHA_L1, isALPHA, "XPosixAlpha", "XPosixAlpha");
- case _C_C_T_(BLANK, isBLANK_L1, isBLANK, "XPosixBlank", "XPosixBlank");
- case _C_C_T_(CNTRL, isCNTRL_L1, isCNTRL, "XPosixCntrl", "XPosixCntrl");
- case _C_C_T_(GRAPH, isGRAPH_L1, isGRAPH, "XPosixGraph", "XPosixGraph");
- case _C_C_T_(LOWER, isLOWER_L1, isLOWER, "XPosixLower", "__XPosixLower_i");
- case _C_C_T_(PRINT, isPRINT_L1, isPRINT, "XPosixPrint", "XPosixPrint");
- case _C_C_T_(PSXSPC, isPSXSPC_L1, isPSXSPC, "XPosixSpace", "XPosixSpace");
- case _C_C_T_(PUNCT, isPUNCT_L1, isPUNCT, "XPosixPunct", "XPosixPunct");
- case _C_C_T_(UPPER, isUPPER_L1, isUPPER, "XPosixUpper", "__XPosixUpper_i");
- /* \s, \w match all unicode if utf8. */
- case _C_C_T_(SPACE, isSPACE_L1, isSPACE, "SpacePerl", "SpacePerl");
- case _C_C_T_(ALNUM, isWORDCHAR_L1, isALNUM, "Word", "Word");
- case _C_C_T_(XDIGIT, isXDIGIT_L1, isXDIGIT, "XPosixXDigit", "XPosixXDigit");
- case _C_C_T_NOLOC_(VERTWS, is_VERTWS_latin1(&value), "VertSpace");
- case _C_C_T_NOLOC_(HORIZWS, is_HORIZWS_latin1(&value), "HorizSpace");
+
+ case ANYOF_ALNUMC: /* C's alnum, in contrast to \w */
+ DO_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass, properties,
+ PL_PosixAlnum, PL_L1PosixAlnum, "XPosixAlnum", listsv);
+ break;
+ case ANYOF_NALNUMC:
+ DO_N_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass, properties,
+ PL_PosixAlnum, PL_L1PosixAlnum, "XPosixAlnum", listsv);
+ break;
+ case ANYOF_ALPHA:
+ DO_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass, properties,
+ PL_PosixAlpha, PL_L1PosixAlpha, "XPosixAlpha", listsv);
+ break;
+ case ANYOF_NALPHA:
+ DO_N_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass, properties,
+ PL_PosixAlpha, PL_L1PosixAlpha, "XPosixAlpha", listsv);
+ break;
case ANYOF_ASCII:
- if (LOC)
- ANYOF_CLASS_SET(ret, ANYOF_ASCII);
- else {
- for (value = 0; value < 128; value++)
- stored +=
- set_regclass_bit(pRExC_state, ret, (U8) ASCII_TO_NATIVE(value), &l1_fold_invlist, &unicode_alternate);
+ if (LOC) {
+ ANYOF_CLASS_SET(ret, namedclass);
}
- yesno = '+';
- what = NULL; /* Doesn't match outside ascii, so
- don't want to add +utf8:: */
+ else {
+ _invlist_union(properties, PL_ASCII, &properties);
+ }
break;
case ANYOF_NASCII:
- if (LOC)
- ANYOF_CLASS_SET(ret, ANYOF_NASCII);
- else {
- for (value = 128; value < 256; value++)
- stored +=
- set_regclass_bit(pRExC_state, ret, (U8) ASCII_TO_NATIVE(value), &l1_fold_invlist, &unicode_alternate);
+ if (LOC) {
+ ANYOF_CLASS_SET(ret, namedclass);
}
- ANYOF_FLAGS(ret) |= ANYOF_UNICODE_ALL;
- yesno = '!';
- what = "ASCII";
- break;
+ else {
+ _invlist_union_complement_2nd(properties,
+ PL_ASCII, &properties);
+ if (DEPENDS_SEMANTICS) {
+ ANYOF_FLAGS(ret) |= ANYOF_NON_UTF8_LATIN1_ALL;
+ }
+ }
+ break;
+ case ANYOF_BLANK:
+ DO_POSIX(ret, namedclass, properties,
+ PL_PosixBlank, PL_XPosixBlank);
+ break;
+ case ANYOF_NBLANK:
+ DO_N_POSIX(ret, namedclass, properties,
+ PL_PosixBlank, PL_XPosixBlank);
+ break;
+ case ANYOF_CNTRL:
+ DO_POSIX(ret, namedclass, properties,
+ PL_PosixCntrl, PL_XPosixCntrl);
+ break;
+ case ANYOF_NCNTRL:
+ DO_N_POSIX(ret, namedclass, properties,
+ PL_PosixCntrl, PL_XPosixCntrl);
+ break;
case ANYOF_DIGIT:
- if (LOC)
- ANYOF_CLASS_SET(ret, ANYOF_DIGIT);
+ /* Ignore the compiler warning for this macro, planned to
+ * be eliminated later */
+ DO_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass, properties,
+ PL_PosixDigit, PL_PosixDigit, "XPosixDigit", listsv);
+ break;
+ case ANYOF_NDIGIT:
+ DO_N_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass, properties,
+ PL_PosixDigit, PL_PosixDigit, "XPosixDigit", listsv);
+ break;
+ case ANYOF_GRAPH:
+ DO_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass, properties,
+ PL_PosixGraph, PL_L1PosixGraph, "XPosixGraph", listsv);
+ break;
+ case ANYOF_NGRAPH:
+ DO_N_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass, properties,
+ PL_PosixGraph, PL_L1PosixGraph, "XPosixGraph", listsv);
+ break;
+ case ANYOF_HORIZWS:
+ /* For these, we use the nonbitmap, as /d doesn't make a
+ * difference in what these match. There would be problems
+ * if these characters had folds other than themselves, as
+ * nonbitmap is subject to folding. It turns out that \h
+ * is just a synonym for XPosixBlank */
+ _invlist_union(nonbitmap, PL_XPosixBlank, &nonbitmap);
+ break;
+ case ANYOF_NHORIZWS:
+ _invlist_union_complement_2nd(nonbitmap,
+ PL_XPosixBlank, &nonbitmap);
+ break;
+ case ANYOF_LOWER:
+ case ANYOF_NLOWER:
+ { /* These require special handling, as they differ under
+ folding, matching Cased there (which in the ASCII range
+ is the same as Alpha */
+
+ SV* ascii_source;
+ SV* l1_source;
+ const char *Xname;
+
+ if (FOLD && ! LOC) {
+ ascii_source = PL_PosixAlpha;
+ l1_source = PL_L1Cased;
+ Xname = "Cased";
+ }
+ else {
+ ascii_source = PL_PosixLower;
+ l1_source = PL_L1PosixLower;
+ Xname = "XPosixLower";
+ }
+ if (namedclass == ANYOF_LOWER) {
+ DO_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass, properties,
+ ascii_source, l1_source, Xname, listsv);
+ }
else {
- /* consecutive digits assumed */
- for (value = '0'; value <= '9'; value++)
- stored +=
- set_regclass_bit(pRExC_state, ret, (U8) value, &l1_fold_invlist, &unicode_alternate);
+ DO_N_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass,
+ properties, ascii_source, l1_source, Xname, listsv);
}
- yesno = '+';
- what = "Digit";
break;
- case ANYOF_NDIGIT:
- if (LOC)
- ANYOF_CLASS_SET(ret, ANYOF_NDIGIT);
+ }
+ case ANYOF_PRINT:
+ DO_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass, properties,
+ PL_PosixPrint, PL_L1PosixPrint, "XPosixPrint", listsv);
+ break;
+ case ANYOF_NPRINT:
+ DO_N_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass, properties,
+ PL_PosixPrint, PL_L1PosixPrint, "XPosixPrint", listsv);
+ break;
+ case ANYOF_PUNCT:
+ DO_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass, properties,
+ PL_PosixPunct, PL_L1PosixPunct, "XPosixPunct", listsv);
+ break;
+ case ANYOF_NPUNCT:
+ DO_N_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass, properties,
+ PL_PosixPunct, PL_L1PosixPunct, "XPosixPunct", listsv);
+ break;
+ case ANYOF_PSXSPC:
+ DO_POSIX(ret, namedclass, properties,
+ PL_PosixSpace, PL_XPosixSpace);
+ break;
+ case ANYOF_NPSXSPC:
+ DO_N_POSIX(ret, namedclass, properties,
+ PL_PosixSpace, PL_XPosixSpace);
+ break;
+ case ANYOF_SPACE:
+ DO_POSIX(ret, namedclass, properties,
+ PL_PerlSpace, PL_XPerlSpace);
+ break;
+ case ANYOF_NSPACE:
+ DO_N_POSIX(ret, namedclass, properties,
+ PL_PerlSpace, PL_XPerlSpace);
+ break;
+ case ANYOF_UPPER: /* Same as LOWER, above */
+ case ANYOF_NUPPER:
+ {
+ SV* ascii_source;
+ SV* l1_source;
+ const char *Xname;
+
+ if (FOLD && ! LOC) {
+ ascii_source = PL_PosixAlpha;
+ l1_source = PL_L1Cased;
+ Xname = "Cased";
+ }
else {
- /* consecutive digits assumed */
- for (value = 0; value < '0'; value++)
- stored +=
- set_regclass_bit(pRExC_state, ret, (U8) value, &l1_fold_invlist, &unicode_alternate);
- for (value = '9' + 1; value < 256; value++)
- stored +=
- set_regclass_bit(pRExC_state, ret, (U8) value, &l1_fold_invlist, &unicode_alternate);
+ ascii_source = PL_PosixUpper;
+ l1_source = PL_L1PosixUpper;
+ Xname = "XPosixUpper";
}
- yesno = '!';
- what = "Digit";
- if (AT_LEAST_ASCII_RESTRICTED ) {
- ANYOF_FLAGS(ret) |= ANYOF_UNICODE_ALL;
+ if (namedclass == ANYOF_UPPER) {
+ DO_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass, properties,
+ ascii_source, l1_source, Xname, listsv);
}
- break;
+ else {
+ DO_N_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass,
+ properties, ascii_source, l1_source, Xname, listsv);
+ }
+ break;
+ }
+ case ANYOF_ALNUM: /* Really is 'Word' */
+ DO_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass, properties,
+ PL_PosixWord, PL_L1PosixWord, "XPosixWord", listsv);
+ break;
+ case ANYOF_NALNUM:
+ DO_N_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass, properties,
+ PL_PosixWord, PL_L1PosixWord, "XPosixWord", listsv);
+ break;
+ case ANYOF_VERTWS:
+ /* For these, we use the nonbitmap, as /d doesn't make a
+ * difference in what these match. There would be problems
+ * if these characters had folds other than themselves, as
+ * nonbitmap is subject to folding */
+ _invlist_union(nonbitmap, PL_VertSpace, &nonbitmap);
+ break;
+ case ANYOF_NVERTWS:
+ _invlist_union_complement_2nd(nonbitmap,
+ PL_VertSpace, &nonbitmap);
+ break;
+ case ANYOF_XDIGIT:
+ DO_POSIX(ret, namedclass, properties,
+ PL_PosixXDigit, PL_XPosixXDigit);
+ break;
+ case ANYOF_NXDIGIT:
+ DO_N_POSIX(ret, namedclass, properties,
+ PL_PosixXDigit, PL_XPosixXDigit);
+ break;
case ANYOF_MAX:
/* this is to handle \p and \P */
break;
vFAIL("Invalid [::] class");
break;
}
- if (what && ! (AT_LEAST_ASCII_RESTRICTED)) {
- /* Strings such as "+utf8::isWord\n" */
- Perl_sv_catpvf(aTHX_ listsv, "%cutf8::%s\n", yesno, what);
- }
continue;
}
}
}
- /* Done with loop; set <nonbitmap> to not include any code points that
- * are in the bitmap */
+ /* Done with loop; remove any code points that are in the bitmap from
+ * <nonbitmap> */
if (change_invlist) {
- SV* keep_list = _new_invlist(2);
- _append_range_to_invlist(keep_list, max_cp_to_set + 1, UV_MAX);
- _invlist_intersection(nonbitmap, keep_list, &nonbitmap);
- SvREFCNT_dec(keep_list);
+ _invlist_subtract(nonbitmap,
+ (DEPENDS_SEMANTICS)
+ ? PL_ASCII
+ : PL_Latin1,
+ &nonbitmap);
}
/* If have completely emptied it, remove it completely */
* there should not be overlap unless is /d rules. */
_invlist_invert(nonbitmap);
+ /* Any swash can't be used as-is, because we've inverted things */
+ if (swash) {
+ SvREFCNT_dec(swash);
+ swash = NULL;
+ }
+
for (i = 0; i < 256; ++i) {
if (ANYOF_BITMAP_TEST(ret, i)) {
ANYOF_BITMAP_CLEAR(ret, i);
else {
/* There is no overlap for non-/d, so just delete anything
* below 256 */
- SV* keep_list = _new_invlist(2);
- _append_range_to_invlist(keep_list, 256, UV_MAX);
- _invlist_intersection(nonbitmap, keep_list, &nonbitmap);
- SvREFCNT_dec(keep_list);
+ _invlist_intersection(nonbitmap, PL_AboveLatin1, &nonbitmap);
}
}
}
return ret;
}
-#undef _C_C_T_
/* reg_skipcomment()
case EXACTFA:
case EXACTFU:
case EXACTFU_SS:
- case EXACTFU_NO_TRIE:
+ case EXACTFU_TRICKYFOLD:
case EXACTFL:
if( exact == PSEUDO )
exact= OP(scan);
https://perl5.git.perl.org / perl5.git / blobdiff