# The dist package (which contains metaconfig) is available via SVN:
# svn co https://svn.sourceforge.net/svnroot/dist/trunk/dist
#
+# Though this script was generated by metaconfig from metaunits, it is
+# OK to send patches against Configure itself. It's up to the Configure
+# pumpkin to backport the patch to the metaunits if it is accepted.
+# For more information on patching Configure, see pod/perlhack.pod
+#
+# The metaunits are also available from the public git repository:
+# http://perl5.git.perl.org/metaconfig.git/ or
+# $ git clone git://perl5.git.perl.org/metaconfig.git metaconfig
#
-# Though this script was generated by metaconfig, it is OK to send
-# patches against it. It's up to the Configure pumpkin to backport
-# the patch to the metaunits if it is accepted.
# See Porting/pumpkin.pod for more information on metaconfig.
#
# $Id: Head.U 6 2006-08-25 22:21:46Z rmanfredi $
#
-# Generated on Wed May 6 14:01:08 CEST 2009 [metaconfig 3.5 PL0]
+# Generated on Thu Aug 12 11:38:08 CEST 2010 [metaconfig 3.5 PL0]
# (with additional metaconfig patches by perlbug@perl.org)
cat >c1$$ <<EOF
rm -f c1$$ c2$$
if test -f /dev/cputype -a -f /dev/drivers -a -f /dev/osversion; then
- cat >&4 <<EOF
+ cat <<EOF
***
*** I'm sorry but this system looks like Plan 9 and Plan 9 doesn't do
*** Configure that well. (Plan 9 is close to UNIX but not close enough.)
fi
if test ! -c /dev/null ; then
- cat >&4 <<EOF
+ cat <<EOF
***
*** I'm sorry, but /dev/null appears to be a file rather than a device.
*** Please consult your operating sytem's notes for making a device
cf_email=''
cf_by=''
cf_time=''
+charbits=''
+charsize=''
contains=''
cpp_stuff=''
cpplast=''
d_pipe=''
d_poll=''
d_portable=''
+d_prctl=''
+d_prctl_set_name=''
d_procselfexe=''
procselfexe=''
d_old_pthread_create_joinable=''
d_statblks=''
d_statfs_f_flags=''
d_statfs_s=''
+d_static_inline=''
+perl_static_inline=''
d_fstatvfs=''
d_statvfs=''
d_stdio_cnt_lval=''
d_wctomb=''
d_writev=''
dlext=''
+bin_ELF=''
cccdlflags=''
ccdlflags=''
dlsrc=''
incpath=''
mips_type=''
usrinc=''
+vaproto=''
d_vendorarch=''
installvendorarch=''
vendorarch=''
_egrep=$grep
;;
esac
+case "$less" in
+'') ;;
+*) if $less -R </dev/null >/dev/null; then
+ echo "Substituting less -R for less."
+ less="$less -R"
+ _less=$less
+ fi
+ ;;
+esac
case "$ln" in
ln)
echo "Substituting cp for ln."
perl_patchlevel=0
$echo "(You do not have patchlevel.h. Eek.)"
fi
-if $test -r $rsrc/.patch ; then
- if $test "X$perl_patchlevel" = "X" || $test "`cat $rsrc/.patch`" -gt "$perl_patchlevel" ; then
- perl_patchlevel=`cat $rsrc/.patch`
- fi
-fi
: Define a handy string here to avoid duplication in myconfig.SH and configpm.
version_patchlevel_string="version $patchlevel subversion $subversion"
case "$perl_patchlevel" in
chdir($stem);
;@candidates = map {
[ $_, pack "sss", split m/[._]/, "$_.0.0" ] } glob("5.*");
+ ;@candidates = sort { $a->[1] cmp $b->[1]} @candidates;
}
else {
;@candidates = ();
: DTrace support
dflt_dtrace='/usr/sbin/dtrace'
+$test -x /usr/bin/dtrace && dflt_dtrace='/usr/bin/dtrace'
+
cat <<EOM
Perl can be built to support DTrace on platforms that support it.
$grep fprintf libc.tmp > libc.ptf
xscan='eval "<libc.ptf $com >libc.list"; $echo $n ".$c" >&4'
xrun='eval "<libc.tmp $com >libc.list"; echo "done." >&4'
-xxx='[ADTSIW]'
+xxx='[ADTSIWi]'
if com="$sed -n -e 's/__IO//' -e 's/^.* $xxx *//p'";\
eval $xscan;\
$contains '^fprintf$' libc.list >/dev/null 2>&1; then
rp="Do you wish to use dynamic loading?"
. ./myread
usedl="$ans"
+bin_ELF="$undef"
case "$ans" in
y*) usedl="$define"
case "$dlsrc" in
You appear to have ELF support. I'll use $cc to build dynamic libraries.
EOM
dflt="$cc"
+ bin_ELF="$define"
else
echo "I'll use ld to build dynamic libraries."
dflt='ld'
signal(SIGFPE, blech);
/* Don't let compiler optimize the test away. Store the number
- in a writable string for gcc to pass to sscanf under HP/UX.
+ in a writable string for gcc to pass to sscanf under HP-UX.
*/
sprintf(str, "2147483647");
sscanf(str, "%lf", &f); /* f = (double) 0x7fffffff; */
optimized the whole file away
*/
/* Store the number in a writable string for gcc to pass to
- sscanf under HP/UX.
+ sscanf under HP-UX.
*/
sprintf(str, "-123");
sscanf(str, "%lf", &f); /* f = -123.; */
set poll d_poll
eval $inlibc
+: see if prctl exists
+set prctl d_prctl
+eval $inlibc
+
+: see if prctl supports PR_SET_NAME
+d_prctl_set_name=$undef
+case $d_prctl in
+ $define)
+ $cat >try.c <<EOM
+#include <sys/prctl.h>
+
+int main (int argc, char *argv[])
+{
+ return (prctl (PR_SET_NAME, "Test"));
+ } /* main */
+EOM
+ set try
+ if eval $compile_ok && $run ./try; then
+ echo "Your prctl (PR_SET_NAME, ...) works"
+ d_prctl_set_name=$define
+ fi
+ $rm_try
+ ;;
+ esac
+
: see if readlink exists
set readlink d_readlink
eval $inlibc
*) echo "No, it doesn't." ;;
esac
+: see what flavor, if any, of static inline is supported
+echo " "
+echo "Checking to see if your system supports static inline..."
+$cat > try.c <<'EOCP'
+#include <stdlib.h>
+extern int f_via_a(int x);
+extern int f_via_b(int x);
+int main(int argc, char **argv)
+{
+ int y;
+
+ y = f_via_a(0);
+#ifdef USE_B
+ y = f_via_b(0);
+#endif
+ if (y == 42) {
+ return EXIT_SUCCESS;
+ }
+ else {
+ return EXIT_FAILURE;
+ }
+}
+EOCP
+$cat > a.c <<'EOCP'
+static INLINE int f(int x) {
+ int y;
+ y = x + 42;
+ return y;
+}
+
+int f_via_a(int x)
+{
+ return f(x);
+}
+EOCP
+$cat > b.c <<'EOCP'
+extern int f(int x);
+
+int f_via_b(int x)
+{
+ return f(x);
+}
+EOCP
+
+# Respect a hint (or previous) value for perl_static_inline, if there is one.
+case "$perl_static_inline" in
+'') # Check the various possibilities, and break out on success.
+ # For gcc, prefer __inline__, which will still permit
+ # cflags.SH to add in -ansi.
+ case "$gccversion" in
+ '') xxx="inline __inline__ __inline _inline";;
+ *) xxx="__inline__ inline __inline _inline";;
+ esac
+ for inline in $xxx; do
+ set try -DINLINE=$inline a.c
+ if eval $compile && $run ./try; then
+ # Now make sure there is no external linkage of static
+ # functions
+ set try -DINLINE=$inline -DUSE_B a.c b.c
+ if eval $compile && $run ./try; then
+ $echo "Your compiler supports static $inline, " >&4
+ $echo "but it also creates an external definition," >&4
+ $echo "so I won't use it." >&4
+ val=$undef
+ else
+ $echo "Your compiler supports static $inline." >&4
+ val=$define
+ perl_static_inline="static $inline";
+ break;
+ fi
+ else
+ $echo "Your compiler does NOT support static $inline." >&4
+ val="$undef"
+ fi
+ done
+ ;;
+*inline*) # Some variant of inline exists.
+ echo "Keeping your $hint value of $perl_static_inline."
+ val=$define
+ ;;
+static) # No inline capabilities
+ echo "Keeping your $hint value of $perl_static_inline."
+ val=$undef
+ ;;
+*) # Unrecognized previous value -- blindly trust the supplied
+ # value and hope it makes sense. Use old value for
+ # d_static_inline, if there is one.
+ echo "Keeping your $hint value of $perl_static_inline."
+ case "$d_static_inline" in
+ '') val=$define ;;
+ *) val=$d_static_inline ;;
+ esac
+ ;;
+esac
+# Fallback to plain 'static' if nothing worked.
+case "$perl_static_inline" in
+'')
+ perl_static_inline="static"
+ val=$undef
+ ;;
+esac
+set d_static_inline
+eval $setvar
+$rm -f a.[co] b.[co]
+$rm_try
+
: Check stream access
$cat >&4 <<EOM
Checking how to access stdio streams by file descriptor number...
#endif
int main() {
#if BYTEORDER == 0x1234 || BYTEORDER == 0x4321
- U8 buf[8];
- U32 *up;
+ volatile U8 buf[8];
+ volatile U32 *up;
int i;
if (sizeof(U32) != 4) {
: set the base revision
baserev=5.0
+: length of character in bytes. Is always 1, otherwise it isnt C
+: This used to be a test using sizeof
+charsize=1
+
+: Check for the number of bits in a character
+case "$charbits" in
+'') echo "Checking how long a character is (in bits)..." >&4
+ $cat >try.c <<EOCP
+#include <stdio.h>
+int main ()
+{
+ int n;
+ unsigned char c;
+ for (c = 1, n = 0; c; c <<= 1, n++) ;
+ printf ("%d\n", n);
+ return (0);
+ }
+EOCP
+ set try
+ if eval $compile_ok; then
+ dflt=`$run ./try`
+ else
+ dflt='8'
+ echo "(I can't seem to compile the test program. Guessing...)"
+ fi
+ ;;
+*)
+ dflt="$charbits"
+ ;;
+esac
+rp="What is the length of a character (in bits)?"
+. ./myread
+charbits="$ans"
+$rm_try
+case "$charbits" in
+8) ;;
+*) cat >&4 << EOM
+Your system has an unsigned character size of $charbits bits, which
+is rather unusual (normally it is 8 bits). Perl likely will not work
+correctly on your system, with subtle bugs in various places.
+EOM
+ rp='Do you really want to continue?'
+ dflt='n'
+ . ./myread
+ case "$ans" in
+ [yY]) echo >&4 "Okay, continuing." ;;
+ *) exit 1 ;;
+ esac
+esac
+
: how do we concatenate cpp tokens here?
echo " "
echo "Checking to see how your cpp does stuff like concatenate tokens..." >&4
;;
esac
+: see if prototypes support variable argument declarations
+echo " "
+case "$prototype$i_stdarg" in
+$define$define)
+ echo "It appears we'll be able to prototype varargs functions." >&4
+ val="$define"
+ ;;
+*)
+ echo "Too bad... We won't be using prototyped varargs functions..." >&4
+ val="$undef"
+ ;;
+esac
+set vaproto
+eval $setvar
+
: determine compiler compiler
case "$yacc" in
'')
./Cppsym < Cppsym.know > Cppsym.true
: Add in any linux cpp "predefined macros":
case "$osname::$gccversion" in
- *linux*::*.*)
+ *linux*::*.*|*gnukfreebsd*::*.*|gnu::*.*)
tHdrH=_tmpHdr
rm -f $tHdrH'.h' $tHdrH
touch $tHdrH'.h'
- if cpp -dM $tHdrH'.h' > $tHdrH'_cppsym.h' && [ -s $tHdrH'_cppsym.h' ]; then
+ if $cpp -dM $tHdrH'.h' > $tHdrH'_cppsym.h' && [ -s $tHdrH'_cppsym.h' ]; then
sed 's/#define[\ \ ]*//;s/[\ \ ].*$//' <$tHdrH'_cppsym.h' >$tHdrH'_cppsym.real'
if [ -s $tHdrH'_cppsym.real' ]; then
cat $tHdrH'_cppsym.real' Cppsym.know | sort | uniq | ./Cppsym | sort | uniq > Cppsym.true
: Function to recursively find available extensions, ignoring DynaLoader
: NOTE: recursion limit of 10 to prevent runaway in case of symlink madness
+: In 5.10.1 and later, extensions are stored in directories
+: like File-Glob instead of the older File/Glob/.
find_extensions='
for xxx in *; do
case "$xxx" in
*)
this_ext=`echo $xxx | $sed -e s/-/\\\//g`;
leaf=`echo $xxx | $sed -e s/.*-//`;
- if $test -d File-Glob; then
- if $test -f $xxx/$leaf.xs -o -f $xxx/$leaf.c; then
- known_extensions="$known_extensions $this_ext";
- elif $test -d $xxx; then
- nonxs_extensions="$nonxs_extensions $this_ext";
- fi
- else
+ if $test -d File; then
if $test -f $xxx/$leaf.xs -o -f $xxx/$leaf.c; then
known_extensions="$known_extensions $1$this_ext";
elif $test -f $xxx/Makefile.PL; then
shift;
fi;
fi;
+ else
+ $ls -1 $xxx > $$.tmp;
+ if $contains "\.xs$" $$.tmp > /dev/null 2>&1; then
+ known_extensions="$known_extensions $this_ext";
+ elif $contains "\.c$" $$.tmp > /dev/null 2>&1; then
+ known_extensions="$known_extensions $this_ext";
+ elif $test -d $xxx; then
+ nonxs_extensions="$nonxs_extensions $this_ext";
+ fi;
+ $rm -f $$.tmp;
fi
;;
esac;
done'
tdir=`pwd`
+cd "$rsrc/cpan"
+set X
+shift
+eval $find_extensions
+cd "$rsrc/dist"
+set X
+shift
+eval $find_extensions
cd "$rsrc/ext"
set X
shift
fi
set X $known_extensions
shift
-known_extensions="$*"
+known_extensions=`echo "$*" | tr ' ' $trnl | $sort | tr $trnl ' '`
set X $nonxs_extensions
shift
-nonxs_extensions="$*"
+nonxs_extensions=`echo "$*" | tr ' ' $trnl | $sort | tr $trnl ' '`
cd "$tdir"
: Now see which are supported on this system.
esac
;;
NDBM_File|ndbm_fil)
- case "$i_ndbm" in
+ case "$d_ndbm" in
$define)
case "$osname-$use64bitint" in
hpux-define)
# the appropriate Makefile.PL.
case " $static_ext " in
*" Encode "*) # Add the subextensions of Encode
- cd "$rsrc/ext"
+ cd "$rsrc/cpan"
for xxx in `ls Encode/*/Makefile.PL|awk -F/ '{print $2}'`; do
static_ext="$static_ext Encode/$xxx"
done
# Target system : $myuname
EOT
+: Add in command line options if available
$test -f UU/cmdline.opt && $cat UU/cmdline.opt >> config.sh
+
$spitshell <<EOT >>config.sh
Author='$Author'
baserev='$baserev'
bash='$bash'
bin='$bin'
+bin_ELF='$bin_ELF'
binexp='$binexp'
bison='$bison'
byacc='$byacc'
cf_by='$cf_by'
cf_email='$cf_email'
cf_time='$cf_time'
+charbits='$charbits'
+charsize='$charsize'
chgrp='$chgrp'
chmod='$chmod'
chown='$chown'
d_pipe='$d_pipe'
d_poll='$d_poll'
d_portable='$d_portable'
+d_prctl='$d_prctl'
+d_prctl_set_name='$d_prctl_set_name'
d_printf_format_null='$d_printf_format_null'
d_procselfexe='$d_procselfexe'
d_pseudofork='$d_pseudofork'
d_statblks='$d_statblks'
d_statfs_f_flags='$d_statfs_f_flags'
d_statfs_s='$d_statfs_s'
+d_static_inline='$d_static_inline'
d_statvfs='$d_statvfs'
d_stdio_cnt_lval='$d_stdio_cnt_lval'
d_stdio_ptr_lval='$d_stdio_ptr_lval'
perl5='$perl5'
perl='$perl'
perl_patchlevel='$perl_patchlevel'
+perl_static_inline='$perl_static_inline'
perladmin='$perladmin'
perllibs='$perllibs'
perlpath='$perlpath'
uvtype='$uvtype'
uvuformat='$uvuformat'
uvxformat='$uvxformat'
+vaproto='$vaproto'
vendorarch='$vendorarch'
vendorarchexp='$vendorarchexp'
vendorbin='$vendorbin'
zip='$zip'
EOT
-: Add in command line options if available
-$test -f UU/cmdline.opt && $cat UU/cmdline.opt >> config.sh
-
: add special variables
$test -f $src/patchlevel.h && \
awk '/^#define[ ]+PERL_/ {printf "%s=%s\n",$2,$3}' $src/patchlevel.h >>config.sh
https://perl5.git.perl.org / perl5.git / blobdiff