#
-# Makefile to build perl on Windowns NT using Microsoft NMAKE.
-#
+# Makefile to build perl on Windowns NT using DMAKE.
+# Supported compilers:
+# Visual C++ 2.0 thro 5.0
+# Borland C++ 5.02
+# Mingw32-0.1.4 with gcc-2.7.2
#
# This is set up to build a perl.exe that runs off a shared library
# (perl.dll). Also makes individual DLLs for the XS extensions.
#
# Set these to wherever you want "nmake install" to put your
# newly built perl.
-INST_DRV=c:
-INST_TOP=$(INST_DRV)\perl
+INST_DRV *= c:
+INST_TOP *= $(INST_DRV)\perl5004.5x
+
+#
+# uncomment to enable threads-capabilities
+USE_THREADS *= define
#
-# uncomment one if you are using Visual C++ 2.x or Borland
-# comment out both if you are using Visual C++ 4.x and above
-#CCTYPE=MSVC20
-CCTYPE=BORLAND
+# uncomment one
+#CCTYPE *= MSVC20
+#CCTYPE *= MSVC
+CCTYPE *= BORLAND
+#CCTYPE *= GCC
#
# uncomment next line if you want debug version of perl (big,slow)
-#CFG=Debug
+#CFG *= Debug
+
+#
+# if you have the source for des_fcrypt(), uncomment this and make sure the
+# file exists (see README.win32)
+#CRYPT_SRC *= des_fcrypt.c
+
+#
+# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
+# library, uncomment this, and make sure the library exists (see README.win32)
+#CRYPT_LIB *= des_fcrypt.lib
+
+#
+# set this if you wish to use perl's malloc
+# WARNING: Turning this on/off WILL break binary compatibility with extensions
+# you may have compiled with/without it. Be prepared to recompile all extensions
+# if you change the default.
+PERL_MALLOC *= define
#
# set the install locations of the compiler include/libraries
-#CCHOME = f:\msdev\vc
-CCHOME = D:\bc5
-CCINCDIR = $(CCHOME)\include
-CCLIBDIR = $(CCHOME)\lib
+#CCHOME *= f:\msdev\vc
+CCHOME *= C:\bc5
+#CCHOME *= D:\packages\mingw32
+CCINCDIR *= $(CCHOME)\include
+CCLIBDIR *= $(CCHOME)\lib
#
# set this to point to cmd.exe (only needed if you use some
# alternate shell that doesn't grok cmd.exe style commands)
-SHELL = g:\winnt\system32\cmd.exe
+#SHELL *= g:\winnt\system32\cmd.exe
#
# set this to your email address (perl will guess a value from
# from your loginname and your hostname, which may not be right)
-#EMAIL =
+#EMAIL *=
##################### CHANGE THESE ONLY IF YOU MUST #####################
+.IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
+D_CRYPT=undef
+.ELSE
+D_CRYPT=define
+CRYPT_FLAG=-DHAVE_DES_FCRYPT
+.ENDIF
+
+.IF "$(PERL_MALLOC)" == ""
+PERL_MALLOC *= undef
+.ENDIF
+
+#BUILDOPT *= -DMULTIPLICITY
+#BUILDOPT *= -DPERL_GLOBAL_STRUCT -DMULTIPLICITY
+# -DUSE_PERLIO -D__STDC__=1 -DUSE_SFIO -DI_SFIO -I\sfio97\include
+
+.IF "$(USE_THREADS)" == ""
+USE_THREADS = undef
+.ENDIF
+
+.IMPORT .IGNORE : PROCESSOR_ARCHITECTURE
+
+PROCESSOR_ARCHITECTURE *= x86
+
+.IF "$(USE_THREADS)" == "define"
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
+.ELSE
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
+.ENDIF
+
+ARCHDIR = ..\lib\$(ARCHNAME)
+COREDIR = ..\lib\CORE
+
#
# Programs to compile, build .lib files and link
#
CC = bcc32
LINK32 = tlink32
LIB32 = tlib
-IMPLIB = implib
+IMPLIB = implib -c
#
# Options
RUNTIME = -D_RTLDLL
INCLUDES = -I.\include -I. -I.. -I$(CCINCDIR)
#PCHFLAGS = -H -H$(INTDIR)\bcmoduls.pch
-DEFINES = -DWIN32 -DUSE_THREADS -D_WIN32_WINNT=0x400
-LOCDEFS = -DPERLDLL
+DEFINES = -DWIN32 $(BUILDOPT) $(CRYPT_FLAG)
+LOCDEFS = -DPERLDLL -DPERL_CORE
SUBSYS = console
LIBC = cw32mti.lib
-LIBFILES = import32.lib $(LIBC) odbc32.lib odbccp32.lib
+LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC) odbc32.lib odbccp32.lib
WINIOMAYBE =
.IF "$(CFG)" == "Debug"
-OPTIMIZE = -v $(RUNTIME)
+OPTIMIZE = -v $(RUNTIME) -DDEBUGGING
LINK_DBG = -v
.ELSE
-OPTIMIZE = -O $(RUNTIME)
+OPTIMIZE = -5 -O2 $(RUNTIME)
+LINK_DBG =
+.ENDIF
+
+CFLAGS = -w -d -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) $(PCHFLAGS) $(OPTIMIZE)
+LINK_FLAGS = $(LINK_DBG) -L$(CCLIBDIR)
+OBJOUT_FLAG = -o
+EXEOUT_FLAG = -e
+
+.ELIF "$(CCTYPE)" == "GCC"
+
+CC = gcc -pipe
+LINK32 = gcc -pipe
+LIB32 = ar
+IMPLIB = dlltool
+
+o = .o
+
+#
+# Options
+#
+RUNTIME =
+INCLUDES = -I.\include -I. -I..
+DEFINES = -DWIN32 $(BUILDOPT) $(CRYPT_FLAG)
+LOCDEFS = -DPERLDLL -DPERL_CORE
+SUBSYS = console
+LIBC = -lcrtdll
+LIBFILES = $(CRYPT_LIB) -ladvapi32 -luser32 -lwsock32 -lmingw32 -lgcc -lmoldname $(LIBC) \
+ -lkernel32
+
+WINIOMAYBE =
+
+.IF "$(CFG)" == "Debug"
+OPTIMIZE = -g -O2 $(RUNTIME) -DDEBUGGING
+LINK_DBG = -g
+.ELSE
+OPTIMIZE = -g -O2 $(RUNTIME)
LINK_DBG =
.ENDIF
-CFLAGS = -w -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) $(PCHFLAGS) $(OPTIMIZE)
+CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
LINK_FLAGS = $(LINK_DBG) -L$(CCLIBDIR)
OBJOUT_FLAG = -o
+EXEOUT_FLAG = -o
.ELSE
.ENDIF
INCLUDES = -I.\include -I. -I..
#PCHFLAGS = -Fp$(INTDIR)\vcmoduls.pch -YX
-DEFINES = -DWIN32 -D_CONSOLE -DUSE_THREADS -D_WIN32_WINNT=0x400
-LOCDEFS = -DPERLDLL
+DEFINES = -DWIN32 -D_CONSOLE $(BUILDOPT) $(CRYPT_FLAG)
+LOCDEFS = -DPERLDLL -DPERL_CORE
SUBSYS = console
.IF "$(RUNTIME)" == "-MD"
WINIOMAYBE =
.ELSE
LIBC = libcmt.lib
-WINIOMAYBE = win32io.obj
+WINIOMAYBE =
.ENDIF
.IF "$(CFG)" == "Debug"
.IF "$(CCTYPE)" == "MSVC20"
-OPTIMIZE = -Od $(RUNTIME) -Z7 -D_DEBUG
+OPTIMIZE = -Od $(RUNTIME) -Z7 -D_DEBUG -DDEBUGGING
.ELSE
-OPTIMIZE = -Od $(RUNTIME)d -Z7 -D_DEBUG
+OPTIMIZE = -Od $(RUNTIME)d -Z7 -D_DEBUG -DDEBUGGING
.ENDIF
LINK_DBG = -debug -pdb:none
.ELSE
.IF "$(CCTYPE)" == "MSVC20"
-OPTIMIZE = -Od $(RUNTIME) -DNDEBUG
+OPTIMIZE = -O1 $(RUNTIME) -DNDEBUG
.ELSE
-OPTIMIZE = -Od $(RUNTIME) -DNDEBUG
+OPTIMIZE = -O1 $(RUNTIME) -DNDEBUG
.ENDIF
LINK_DBG = -release
.ENDIF
# we don't add LIBC here, the compiler do it based on -MD/-MT
-LIBFILES = oldnames.lib kernel32.lib user32.lib gdi32.lib \
+LIBFILES = $(CRYPT_LIB) oldnames.lib kernel32.lib user32.lib gdi32.lib \
winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib \
oleaut32.lib netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
version.lib odbc32.lib odbccp32.lib
-CFLAGS = -nologo -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) $(PCHFLAGS) $(OPTIMIZE)
-LINK_FLAGS = -nologo $(LIBFILES) $(LINK_DBG) -machine:I386
+CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) $(PCHFLAGS) $(OPTIMIZE)
+LINK_FLAGS = -nologo $(LINK_DBG) -machine:$(PROCESSOR_ARCHITECTURE)
OBJOUT_FLAG = -Fo
+EXEOUT_FLAG = -Fe
.ENDIF
#################### do not edit below this line #######################
############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
+o *= .obj
+
#
# Rules
#
-.SUFFIXES :
-.SUFFIXES : .c .obj .dll .lib .exe
-.c.obj:
- $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $<
+.SUFFIXES : .c $(o) .dll .lib .exe .a
-.IF "$(CCTYPE)" == "BORLAND"
+.c$(o):
+ $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS) $(OBJOUT_FLAG)$@ $<
+
+.y.c:
+ $(NOOP)
-.obj.dll:
- $(LINK32) -Tpd -ap $(LINK_FLAGS) c0d32.obj $<,$@,,$(LIBFILES),$(*B).def
+$(o).dll:
+.IF "$(CCTYPE)" == "BORLAND"
+ $(LINK32) -Tpd -ap $(LINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
$(IMPLIB) $(*B).lib $@
+.ELIF "$(CCTYPE)" == "GCC"
+ $(LINK32) -o $@ $(LINK_FLAGS) $< $(LIBFILES)
+ $(IMPLIB) -def $(*B).def $(*B).lib $@
.ELSE
-
-.obj.dll:
$(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
- -out:$@ $(LINK_FLAGS) $< $(LIBPERL)
-
+ -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
.ENDIF
#
GLOBEXE=..\perlglob.exe
CONFIGPM=..\lib\Config.pm
MINIMOD=..\lib\ExtUtils\Miniperl.pm
+X2P=..\x2p\a2p.exe
PL2BAT=bin\pl2bat.pl
GLOBBAT = bin\perlglob.bat
.IF "$(CCTYPE)" == "BORLAND"
-# Borland wildargs is incompatible with MS setargv
CFGSH_TMPL = config.bc
CFGH_TMPL = config_H.bc
-# Borland's perl.exe will work on W95, so we don't make this
+
+.ELIF "$(CCTYPE)" == "GCC"
+
+CFGSH_TMPL = config.gc
+CFGH_TMPL = config_H.gc
.ELSE
-MAKE = nmake -nologo
CFGSH_TMPL = config.vc
CFGH_TMPL = config_H.vc
PERL95EXE=..\perl95.exe
XCOPY=xcopy /f /r /i /d
RCOPY=xcopy /f /r /i /e /d
+NOOP=@echo
#NULL=
+.IF "$(CRYPT_SRC)" != ""
+CRYPT_OBJ=$(CRYPT_SRC:db:+$(o))
+.ENDIF
+
+.IF "$(PERL_MALLOC)" == "define"
+MALLOC_SRC = ..\malloc.c
+MALLOC_OBJ = ..\malloc$(o)
+.ENDIF
+
#
# filenames given to xsubpp must have forward slashes (since it puts
# full pathnames in #line strings)
XSUBPP=..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp -C++ -prototypes
CORE_C= ..\av.c \
+ ..\byterun.c \
..\deb.c \
..\doio.c \
..\doop.c \
..\taint.c \
..\toke.c \
..\universal.c \
- ..\util.c
-
-CORE_OBJ= ..\av.obj \
- ..\deb.obj \
- ..\doio.obj \
- ..\doop.obj \
- ..\dump.obj \
- ..\globals.obj \
- ..\gv.obj \
- ..\hv.obj \
- ..\mg.obj \
- ..\op.obj \
- ..\perl.obj \
- ..\perlio.obj \
- ..\perly.obj \
- ..\pp.obj \
- ..\pp_ctl.obj \
- ..\pp_hot.obj \
- ..\pp_sys.obj \
- ..\regcomp.obj \
- ..\regexec.obj \
- ..\run.obj \
- ..\scope.obj \
- ..\sv.obj \
- ..\taint.obj \
- ..\toke.obj \
- ..\universal.obj\
- ..\util.obj
+ ..\util.c \
+ $(MALLOC_SRC) \
+ $(CRYPT_SRC)
+
+CORE_OBJ= ..\av$(o) \
+ ..\byterun$(o) \
+ ..\deb$(o) \
+ ..\doio$(o) \
+ ..\doop$(o) \
+ ..\dump$(o) \
+ ..\globals$(o) \
+ ..\gv$(o) \
+ ..\hv$(o) \
+ ..\mg$(o) \
+ ..\op$(o) \
+ ..\perl$(o) \
+ ..\perlio$(o) \
+ ..\perly$(o) \
+ ..\pp$(o) \
+ ..\pp_ctl$(o) \
+ ..\pp_hot$(o) \
+ ..\pp_sys$(o) \
+ ..\regcomp$(o) \
+ ..\regexec$(o) \
+ ..\run$(o) \
+ ..\scope$(o) \
+ ..\sv$(o) \
+ ..\taint$(o) \
+ ..\toke$(o) \
+ ..\universal$(o)\
+ ..\util$(o) \
+ $(MALLOC_OBJ) \
+ $(CRYPT_OBJ)
WIN32_C = perllib.c \
win32.c \
- win32io.c \
- win32sck.c
+ win32sck.c \
+ win32thread.c
-WIN32_OBJ = win32.obj \
- win32io.obj \
- win32sck.obj
+WIN32_OBJ = win32$(o) \
+ win32sck$(o) \
+ win32thread$(o)
-PERL95_OBJ = perl95.obj \
- win32mt.obj \
- win32iomt.obj \
- win32sckmt.obj
+PERL95_OBJ = perl95$(o) \
+ win32mt$(o) \
+ win32sckmt$(o) \
+ $(CRYPT_OBJ)
-DLL_OBJ = perllib.obj $(DYNALOADER).obj
+DLL_OBJ = perllib$(o) $(DYNALOADER)$(o)
+
+X2P_OBJ = ..\x2p\a2p$(o) \
+ ..\x2p\hash$(o) \
+ ..\x2p\str$(o) \
+ ..\x2p\util$(o) \
+ ..\x2p\walk$(o)
CORE_H = ..\av.h \
+ ..\byterun.h \
+ ..\bytecode.h \
..\cop.h \
..\cv.h \
..\dosish.h \
..\XSUB.h \
.\config.h \
..\EXTERN.h \
+ ..\perlvars.h \
+ ..\intrpvar.h \
+ ..\thrdvar.h \
.\include\dirent.h \
.\include\netdb.h \
.\include\sys\socket.h \
.\win32.h
-
-EXTENSIONS=DynaLoader Socket IO Fcntl Opcode SDBM_File attrs
+DYNAMIC_EXT=Socket IO Fcntl Opcode SDBM_File attrs Thread B
+STATIC_EXT=DynaLoader
DYNALOADER=$(EXTDIR)\DynaLoader\DynaLoader
SOCKET=$(EXTDIR)\Socket\Socket
SDBM_FILE=$(EXTDIR)\SDBM_File\SDBM_File
IO=$(EXTDIR)\IO\IO
ATTRS=$(EXTDIR)\attrs\attrs
+THREAD=$(EXTDIR)\Thread\Thread
+B=$(EXTDIR)\B\B
SOCKET_DLL=..\lib\auto\Socket\Socket.dll
FCNTL_DLL=..\lib\auto\Fcntl\Fcntl.dll
SDBM_FILE_DLL=..\lib\auto\SDBM_File\SDBM_File.dll
IO_DLL=..\lib\auto\IO\IO.dll
ATTRS_DLL=..\lib\auto\attrs\attrs.dll
+THREAD_DLL=..\lib\auto\Thread\Thread.dll
+B_DLL=..\lib\auto\B\B.dll
STATICLINKMODULES=DynaLoader
DYNALOADMODULES= \
$(OPCODE_DLL) \
$(SDBM_FILE_DLL)\
$(IO_DLL) \
- $(ATTRS_DLL)
+ $(ATTRS_DLL) \
+ $(THREAD_DLL) \
+ $(B_DLL)
POD2HTML=$(PODDIR)\pod2html
POD2MAN=$(PODDIR)\pod2man
POD2LATEX=$(PODDIR)\pod2latex
POD2TEXT=$(PODDIR)\pod2text
+CFG_VARS= "INST_DRV=$(INST_DRV)" \
+ "INST_TOP=$(INST_TOP)" \
+ "archname=$(ARCHNAME)" \
+ "cc=$(CC)" \
+ "ccflags=$(OPTIMIZE) $(DEFINES)" \
+ "cf_email=$(EMAIL)" \
+ "d_crypt=$(D_CRYPT)" \
+ "d_mymalloc=$(PERL_MALLOC)" \
+ "libs=$(LIBFILES:f)" \
+ "incpath=$(CCINCDIR)" \
+ "libpth=$(strip $(CCLIBDIR) $(LIBFILES:d))" \
+ "libc=$(LIBC)" \
+ "static_ext=$(STATIC_EXT)" \
+ "dynamic_ext=$(DYNAMIC_EXT)" \
+ "usethreads=$(USE_THREADS)" \
+ "LINK_FLAGS=$(LINK_FLAGS)" \
+ "optimize=$(OPTIMIZE)"
+
#
# Top targets
#
-all: $(PERLEXE) $(PERL95EXE) $(GLOBEXE) $(DYNALOADMODULES) $(MINIMOD) $(GLOBBAT)
+all: $(PERLEXE) $(PERL95EXE) $(GLOBEXE) $(DYNALOADMODULES) $(MINIMOD) \
+ $(X2P)
-$(DYNALOADER).obj : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
+$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
#------------------------------------------------------------
-$(GLOBEXE): perlglob.obj
+$(GLOBEXE): perlglob$(o)
.IF "$(CCTYPE)" == "BORLAND"
$(CC) -c -w -v -tWM -I$(CCINCDIR) perlglob.c
- $(LINK32) -Tpe -ap $(LINK_FLAGS) c0x32.obj perlglob.obj \
- $(CCLIBDIR)\32BIT\wildargs.obj,$@,,import32.lib cw32mt.lib,
+ $(LINK32) -Tpe -ap $(LINK_FLAGS) c0x32$(o) perlglob$(o) \
+ $(CCLIBDIR)\32BIT\wildargs$(o),$@,,import32.lib cw32mt.lib,
+.ELIF "$(CCTYPE)" == "GCC"
+ $(LINK32) $(LINK_FLAGS) -o $@ perlglob$(o) $(LIBFILES)
.ELSE
- $(LINK32) $(LINK_FLAGS) -out:$@ -subsystem:$(SUBSYS) perlglob.obj setargv.obj
+ $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
+ perlglob$(o) setargv$(o)
.ENDIF
-$(GLOBBAT) : ..\lib\File\DosGlob.pm $(MINIPERL)
- $(MINIPERL) $(PL2BAT) - < ..\lib\File\DosGlob.pm > $(GLOBBAT)
-
-perlglob.obj : perlglob.c
+perlglob$(o) : perlglob.c
-..\miniperlmain.obj : ..\miniperlmain.c $(CORE_H)
+..\miniperlmain$(o) : ..\miniperlmain.c $(CORE_H)
config.w32 : $(CFGSH_TMPL)
copy $(CFGSH_TMPL) config.w32
-.\config.h : $(CFGSH_TMPL)
+.\config.h : $(CFGH_TMPL)
-del /f config.h
copy $(CFGH_TMPL) config.h
..\config.sh : config.w32 $(MINIPERL) config_sh.PL
- $(MINIPERL) -I..\lib config_sh.PL "INST_DRV=$(INST_DRV)" \
- "INST_TOP=$(INST_TOP)" "cc=$(CC)" "ccflags=$(OPTIMIZE) $(DEFINES)" \
- "cf_email=$(EMAIL)" "libs=$(LIBFILES:f)" "incpath=$(CCINCDIR)" \
- "libpth=$(strip $(CCLIBDIR) $(LIBFILES:d))" "libc=$(LIBC)" \
- config.w32 > ..\config.sh
+ $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
+
+# this target is for when changes to the main config.sh happen
+# edit config.{b,v,g}c and make this target once for each supported
+# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
+regen_config_h:
+ perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
+ -cd .. && del /f perl.exe
+ cd .. && perl configpm
+ -del /f $(CFGH_TMPL)
+ -mkdir ..\lib\CORE
+ -perl -I..\lib config_h.PL
+ rename config.h $(CFGH_TMPL)
$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
cd .. && miniperl configpm
if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
- $(XCOPY) ..\*.h ..\lib\CORE\*.*
- $(XCOPY) *.h ..\lib\CORE\*.*
- $(RCOPY) include ..\lib\CORE\*.*
- $(MINIPERL) -I..\lib config_h.PL || $(MAKE) CCTYPE=$(CCTYPE) \
- RUNTIME=$(RUNTIME) CFG=$(CFG) $(CONFIGPM)
+ $(XCOPY) ..\*.h $(COREDIR)\*.*
+ $(XCOPY) *.h $(COREDIR)\*.*
+ $(RCOPY) include $(COREDIR)\*.*
+ $(MINIPERL) -I..\lib config_h.PL || $(MAKE) $(MAKEMACROS) $(CONFIGPM)
+
+LKPRE = INPUT (
+LKPOST = )
-$(MINIPERL) : ..\miniperlmain.obj $(CORE_OBJ) $(WIN32_OBJ)
+$(MINIPERL) : ..\miniperlmain$(o) $(CORE_OBJ) $(WIN32_OBJ)
.IF "$(CCTYPE)" == "BORLAND"
$(LINK32) -Tpe -ap $(LINK_FLAGS) \
- @$(mktmp c0x32.obj ..\miniperlmain.obj \
- $(CORE_OBJ:s,\,\\) $(WIN32_OBJ:s,\,\\),$@,,$(LIBFILES),)
+ @$(mktmp c0x32$(o) ..\miniperlmain$(o) \
+ $(CORE_OBJ:s,\,\\) $(WIN32_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
+.ELIF "$(CCTYPE)" == "GCC"
+ $(LINK32) -v -o $@ $(LINK_FLAGS) \
+ $(mktmp $(LKPRE) ..\miniperlmain$(o) \
+ $(CORE_OBJ:s,\,\\) $(WIN32_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
.ELSE
$(LINK32) -subsystem:console -out:$@ \
- @$(mktmp $(LINK_FLAGS) ..\miniperlmain.obj \
+ @$(mktmp $(LINK_FLAGS) $(LIBFILES) ..\miniperlmain$(o) \
$(CORE_OBJ:s,\,\\) $(WIN32_OBJ:s,\,\\))
.ENDIF
$(WIN32_OBJ) : $(CORE_H)
$(CORE_OBJ) : $(CORE_H)
$(DLL_OBJ) : $(CORE_H)
+$(X2P_OBJ) : $(CORE_H)
-perldll.def : $(MINIPERL) $(CONFIGPM)
- $(MINIPERL) -w makedef.pl $(CCTYPE) > perldll.def
+perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym makedef.pl
+ $(MINIPERL) -w makedef.pl $(OPTIMIZE) $(DEFINES) \
+ CCTYPE=$(CCTYPE) > perldll.def
$(PERLDLL): perldll.def $(CORE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
.IF "$(CCTYPE)" == "BORLAND"
$(LINK32) -Tpd -ap $(LINK_FLAGS) \
- @$(mktmp c0d32.obj $(CORE_OBJ:s,\,\\) \
+ @$(mktmp c0d32$(o) $(CORE_OBJ:s,\,\\) \
$(WIN32_OBJ:s,\,\\) $(DLL_OBJ:s,\,\\)\n \
$@,\n \
$(LIBFILES)\n \
perldll.def\n)
$(IMPLIB) $*.lib $@
+.ELIF "$(CCTYPE)" == "GCC"
+ $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(LINK_FLAGS) \
+ $(mktmp $(LKPRE) $(CORE_OBJ:s,\,\\) $(WIN32_OBJ:s,\,\\) \
+ $(DLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
+ dlltool --output-lib $(PERLIMPLIB) \
+ --dllname perl.dll \
+ --def perldll.def \
+ --base-file perl.base \
+ --output-exp perl.exp
+ $(LINK32) -mdll -o $@ $(LINK_FLAGS) \
+ $(mktmp $(LKPRE) $(CORE_OBJ:s,\,\\) $(WIN32_OBJ:s,\,\\) \
+ $(DLL_OBJ:s,\,\\) $(LIBFILES) perl.exp $(LKPOST))
.ELSE
$(LINK32) -dll -def:perldll.def -out:$@ \
- @$(mktmp $(LINK_FLAGS) $(CORE_OBJ:s,\,\\) \
+ @$(mktmp $(LINK_FLAGS) $(LIBFILES) $(CORE_OBJ:s,\,\\) \
$(WIN32_OBJ:s,\,\\) $(DLL_OBJ:s,\,\\))
.ENDIF
- $(XCOPY) $(PERLIMPLIB) ..\lib\CORE
+ $(XCOPY) $(PERLIMPLIB) $(COREDIR)
perl.def : $(MINIPERL) makeperldef.pl
$(MINIPERL) -I..\lib makeperldef.pl $(NULL) > perl.def
$(MINIMOD) : $(MINIPERL) ..\minimod.pl
cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
+$(X2P) : $(X2P_OBJ)
+ $(MINIPERL) ..\x2p\find2perl.PL
+ $(MINIPERL) ..\x2p\s2p.PL
+.IF "$(CCTYPE)" == "BORLAND"
+ $(LINK32) -Tpe -ap $(LINK_FLAGS) \
+ @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
+.ELIF "$(CCTYPE)" == "GCC"
+ $(LINK32) -v -o $@ $(LINK_FLAGS) \
+ $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
+.ELSE
+ $(LINK32) -subsystem:console -out:$@ \
+ @$(mktmp $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\)
+.ENDIF
+
perlmain.c : runperl.c
copy runperl.c perlmain.c
-perlmain.obj : perlmain.c
- $(CC) $(CFLAGS) -UPERLDLL -c perlmain.c
-
+perlmain$(o) : perlmain.c
+ $(CC) $(CFLAGS) -UPERLDLL $(EXEOUT_FLAG)$@ -c perlmain.c
-$(PERLEXE): $(PERLDLL) $(CONFIGPM) perlmain.obj
+$(PERLEXE): $(PERLDLL) $(CONFIGPM) perlmain$(o)
.IF "$(CCTYPE)" == "BORLAND"
$(LINK32) -Tpe -ap $(LINK_FLAGS) \
- @$(mktmp c0x32.obj perlmain.obj $(WINIOMAYBE)\n \
+ @$(mktmp c0x32$(o) perlmain$(o) $(WINIOMAYBE)\n \
$@,\n \
$(PERLIMPLIB) $(LIBFILES)\n)
+.ELIF "$(CCTYPE)" == "GCC"
+ $(LINK32) -o $@ $(LINK_FLAGS) \
+ perlmain.o $(WINIOMAYBE) $(PERLIMPLIB) $(LIBFILES)
.ELSE
- $(LINK32) -subsystem:console -out:perl.exe $(LINK_FLAGS) \
- perlmain.obj $(WINIOMAYBE) $(PERLIMPLIB)
- copy perl.exe $@
- del perl.exe
+ $(LINK32) -subsystem:console -out:$@ $(LINK_FLAGS) $(LIBFILES) \
+ perlmain$(o) $(WINIOMAYBE) $(PERLIMPLIB)
.ENDIF
copy splittree.pl ..
$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" "../LIB/auto"
- attrib -r ..\t\*.*
- copy test ..\t
.IF "$(CCTYPE)" != "BORLAND"
+.IF "$(CCTYPE)" != "GCC"
perl95.c : runperl.c
copy runperl.c perl95.c
-perl95.obj : perl95.c
- $(CC) $(CFLAGS) -MT -UPERLDLL -c perl95.c
-
-win32iomt.obj : win32io.c
- $(CC) $(CFLAGS) -MT -c $(OBJOUT_FLAG)win32iomt.obj win32io.c
+perl95$(o) : perl95.c
+ $(CC) $(CFLAGS) -MT -UPERLDLL -DWIN95FIX -c perl95.c
-win32sckmt.obj : win32sck.c
- $(CC) $(CFLAGS) -MT -c $(OBJOUT_FLAG)win32sckmt.obj win32sck.c
+win32sckmt$(o) : win32sck.c
+ $(CC) $(CFLAGS) -MT -UPERLDLL -DWIN95FIX -c $(OBJOUT_FLAG)win32sckmt$(o) win32sck.c
-win32mt.obj : win32.c
- $(CC) $(CFLAGS) -MT -c $(OBJOUT_FLAG)win32mt.obj win32.c
+win32mt$(o) : win32.c
+ $(CC) $(CFLAGS) -MT -UPERLDLL -DWIN95FIX -c $(OBJOUT_FLAG)win32mt$(o) win32.c
$(PERL95EXE): $(PERLDLL) $(CONFIGPM) $(PERL95_OBJ)
- $(LINK32) -subsystem:console -out:perl95.exe $(LINK_FLAGS) \
+ $(LINK32) -subsystem:console -out:$@ $(LINK_FLAGS) $(LIBFILES) \
$(PERL95_OBJ) $(PERLIMPLIB)
- copy perl95.exe $@
- del perl95.exe
.ENDIF
+.ENDIF
$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
if not exist ..\lib\auto mkdir ..\lib\auto
$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
+$(B_DLL): $(PERLEXE) $(B).xs
+ cd $(EXTDIR)\$(*B) && \
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+ cd $(EXTDIR)\$(*B) && $(MAKE)
+
+$(THREAD_DLL): $(PERLEXE) $(THREAD).xs
+ cd $(EXTDIR)\$(*B) && \
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+ cd $(EXTDIR)\$(*B) && $(MAKE)
+
$(ATTRS_DLL): $(PERLEXE) $(ATTRS).xs
cd $(EXTDIR)\$(*B) && \
..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
pod2html pod2latex pod2man pod2text
cd ..\pod && $(XCOPY) *.bat ..\win32\bin\*.*
copy ..\README.win32 ..\pod\perlwin32.pod
- $(PERLEXE) ..\installhtml --podroot=.. --htmldir=./html \
+ $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
--podpath=pod:lib:ext:utils --htmlroot="//$(INST_HTML:s,:,|,)" \
--libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
cd ..\utils && $(PERLEXE) ..\win32\$(PL2BAT) h2ph splain perlbug \
pl2pm c2ph h2xs perldoc pstruct
$(XCOPY) ..\utils\*.bat bin\*.*
- $(PERLEXE) $(PL2BAT) bin\network.pl bin\www.pl bin\runperl.pl \
- bin\pl2bat.pl
+ $(PERLEXE) -I..\lib $(PL2BAT) bin\network.pl bin\www.pl bin\runperl.pl \
+ bin\pl2bat.pl bin\perlglob.pl
distclean: clean
- -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
+ -del /f $(MINIPERL) $(PERLEXE) $(PERL95EXE) $(PERLDLL) $(GLOBEXE) \
$(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
-del /f *.def *.map
-del /f $(SOCKET_DLL) $(IO_DLL) $(SDBM_FILE_DLL) $(FCNTL_DLL) \
- $(OPCODE_DLL) $(ATTRS_DLL)
+ $(OPCODE_DLL) $(ATTRS_DLL) $(THREAD_DLL) $(B_DLL)
-del /f $(SOCKET).c $(IO).c $(SDBM_FILE).c $(FCNTL).c $(OPCODE).c \
- $(DYNALOADER).c $(ATTRS).c
+ $(DYNALOADER).c $(ATTRS).c $(THREAD).c $(B).c
-del /f $(PODDIR)\*.html
-del /f $(PODDIR)\*.bat
-del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
-del /f perl95.c
.ENDIF
-del /f bin\*.bat
- -cd $(EXTDIR) && del /s *.lib *.def *.map *.bs Makefile *.obj pm_to_blib
- -rmdir /s /q ..\lib\auto
- -rmdir /s /q ..\lib\CORE
+ -cd $(EXTDIR) && del /s *.lib *.def *.map *.bs Makefile *$(o) pm_to_blib
+ -rmdir /s /q ..\lib\auto || rmdir /s ..\lib\auto
+ -rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)
install : all doc utils
- if not exist $(INST_TOP) mkdir $(INST_TOP)
- echo I $(INST_TOP) L $(LIBDIR)
- $(XCOPY) $(PERLEXE) $(INST_BIN)\*.*
+ $(PERLEXE) ..\installperl
.IF "$(PERL95EXE)" != ""
$(XCOPY) $(PERL95EXE) $(INST_BIN)\*.*
.ENDIF
$(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
- $(XCOPY) $(PERLDLL) $(INST_BIN)\*.*
$(XCOPY) bin\*.bat $(INST_BIN)\*.*
- $(RCOPY) ..\lib $(INST_LIB)\*.*
$(XCOPY) ..\pod\*.bat $(INST_BIN)\*.*
- $(XCOPY) ..\pod\*.pod $(INST_POD)\*.*
$(RCOPY) html\*.* $(INST_HTML)\*.*
inst_lib : $(CONFIGPM)
$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" "../LIB/auto"
$(RCOPY) ..\lib $(INST_LIB)\*.*
-minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM)
+minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
$(XCOPY) $(MINIPERL) ..\t\perl.exe
.IF "$(CCTYPE)" == "BORLAND"
$(XCOPY) $(GLOBBAT) ..\t\$(NULL)
cd ..\t && \
$(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
-test : all
+test-prep : all utils
$(XCOPY) $(PERLEXE) ..\t\$(NULL)
$(XCOPY) $(PERLDLL) ..\t\$(NULL)
.IF "$(CCTYPE)" == "BORLAND"
.ELSE
$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
.ENDIF
+
+test : test-prep
cd ..\t && $(PERLEXE) -I..\lib harness
+test-notty : test-prep
+ set PERL_SKIP_TTY_TEST=1 && \
+ cd ..\t && $(PERLEXE) -I.\lib harness
+
clean :
- -@erase miniperlmain.obj
+ -@erase miniperlmain$(o)
-@erase $(MINIPERL)
- -@erase perlglob.obj
- -@erase perlmain.obj
+ -@erase perlglob$(o)
+ -@erase perlmain$(o)
-@erase config.w32
-@erase /f config.h
-@erase $(GLOBEXE)
-@erase $(CORE_OBJ)
-@erase $(WIN32_OBJ)
-@erase $(DLL_OBJ)
- -@erase ..\*.obj ..\*.lib ..\*.exp *.obj *.lib *.exp
+ -@erase $(X2P_OBJ)
+ -@erase ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp
-@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
+ -@erase ..\x2p\*.exe ..\x2p\*.bat
-@erase *.ilk
-@erase *.pdb
https://perl5.git.perl.org / perl5.git / blobdiff