#
# Makefile to build perl on Windowns NT using DMAKE.
# Supported compilers:
#	Visual C++ 2.0 thro 5.0
#	Borland C++ 5.02
#	Mingw32-0.1.4 with gcc-2.7.2
#
# This is set up to build a perl.exe that runs off a shared library
# (perl.dll).  Also makes individual DLLs for the XS extensions.
#

#
# Set these to wherever you want "nmake install" to put your
# newly built perl.
INST_DRV	*= c:
INST_TOP	*= $(INST_DRV)\perl5004.5x

#
# uncomment to enable threads-capabilities
USE_THREADS	*= define

#
# uncomment one
#CCTYPE		*= MSVC20
#CCTYPE		*= MSVC
CCTYPE		*= BORLAND
#CCTYPE		*= GCC

#
# uncomment next line if you want debug version of perl (big,slow)
#CFG		*= Debug

#
# if you have the source for des_fcrypt(), uncomment this and make sure the
# file exists (see README.win32)
#CRYPT_SRC	*= des_fcrypt.c

#
# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
# library, uncomment this, and make sure the library exists (see README.win32)
#CRYPT_LIB	*= des_fcrypt.lib

#
# set this if you wish to use perl's malloc
# WARNING: Turning this on/off WILL break binary compatibility with extensions
# you may have compiled with/without it.  Be prepared to recompile all extensions
# if you change the default.
PERL_MALLOC	*= define

#
# set the install locations of the compiler include/libraries
#CCHOME		*= f:\msdev\vc
CCHOME		*= C:\bc5
#CCHOME		*= D:\packages\mingw32
CCINCDIR	*= $(CCHOME)\include
CCLIBDIR	*= $(CCHOME)\lib

#
# set this to point to cmd.exe (only needed if you use some
# alternate shell that doesn't grok cmd.exe style commands)
#SHELL		*= g:\winnt\system32\cmd.exe

#
# set this to your email address (perl will guess a value from
# from your loginname and your hostname, which may not be right)
#EMAIL *= 

##################### CHANGE THESE ONLY IF YOU MUST #####################

.IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
D_CRYPT=undef
.ELSE
D_CRYPT=define
CRYPT_FLAG=-DHAVE_DES_FCRYPT
.ENDIF

.IF "$(PERL_MALLOC)" == ""
PERL_MALLOC	*= undef
.ENDIF

#BUILDOPT	*= -DMULTIPLICITY 
#BUILDOPT	*= -DPERL_GLOBAL_STRUCT -DMULTIPLICITY 
# -DUSE_PERLIO -D__STDC__=1 -DUSE_SFIO -DI_SFIO -I\sfio97\include

.IF "$(USE_THREADS)" == ""
USE_THREADS	= undef
.ENDIF

.IMPORT .IGNORE : PROCESSOR_ARCHITECTURE

PROCESSOR_ARCHITECTURE *= x86

.IF "$(USE_THREADS)" == "define"
ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
.ELSE
ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)
.ENDIF

ARCHDIR		= ..\lib\$(ARCHNAME)
COREDIR		= ..\lib\CORE

#
# Programs to compile, build .lib files and link
#

.USESHELL :

.IF "$(CCTYPE)" == "BORLAND"

CC = bcc32
LINK32 = tlink32
LIB32 = tlib
IMPLIB = implib -c

#
# Options
#
RUNTIME  = -D_RTLDLL
INCLUDES = -I.\include -I. -I.. -I$(CCINCDIR)
#PCHFLAGS = -H -H$(INTDIR)\bcmoduls.pch 
DEFINES  = -DWIN32 $(BUILDOPT) $(CRYPT_FLAG)
LOCDEFS  = -DPERLDLL -DPERL_CORE
SUBSYS   = console
LIBC = cw32mti.lib
LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC) odbc32.lib odbccp32.lib

WINIOMAYBE =

.IF  "$(CFG)" == "Debug"
OPTIMIZE = -v $(RUNTIME) -DDEBUGGING
LINK_DBG = -v
.ELSE
OPTIMIZE = -5 -O2 $(RUNTIME)
LINK_DBG = 
.ENDIF

CFLAGS   = -w -d -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) $(PCHFLAGS) $(OPTIMIZE)
LINK_FLAGS  = $(LINK_DBG) -L$(CCLIBDIR)
OBJOUT_FLAG = -o
EXEOUT_FLAG = -e

.ELIF "$(CCTYPE)" == "GCC"

CC = gcc -pipe
LINK32 = gcc -pipe
LIB32 = ar
IMPLIB = dlltool

o = .o

#
# Options
#
RUNTIME  =
INCLUDES = -I.\include -I. -I..
DEFINES  = -DWIN32 $(BUILDOPT) $(CRYPT_FLAG)
LOCDEFS  = -DPERLDLL -DPERL_CORE
SUBSYS   = console
LIBC	 = -lcrtdll
LIBFILES = $(CRYPT_LIB) -ladvapi32 -luser32 -lwsock32 -lmingw32 -lgcc -lmoldname $(LIBC) \
		-lkernel32

WINIOMAYBE =

.IF  "$(CFG)" == "Debug"
OPTIMIZE = -g -O2 $(RUNTIME) -DDEBUGGING
LINK_DBG = -g
.ELSE
OPTIMIZE = -g -O2 $(RUNTIME)
LINK_DBG = 
.ENDIF

CFLAGS   = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
LINK_FLAGS  = $(LINK_DBG) -L$(CCLIBDIR)
OBJOUT_FLAG = -o
EXEOUT_FLAG = -o

.ELSE

CC=cl.exe
LINK32=link.exe
LIB32=$(LINK32) -lib
#
# Options
#
.IF "$(RUNTIME)" == ""
RUNTIME  = -MD
.ENDIF
INCLUDES = -I.\include -I. -I..
#PCHFLAGS = -Fp$(INTDIR)\vcmoduls.pch -YX 
DEFINES  = -DWIN32 -D_CONSOLE $(BUILDOPT) $(CRYPT_FLAG)
LOCDEFS  = -DPERLDLL -DPERL_CORE
SUBSYS   = console

.IF "$(RUNTIME)" == "-MD"
LIBC = msvcrt.lib
WINIOMAYBE =
.ELSE
LIBC = libcmt.lib
WINIOMAYBE =
.ENDIF

.IF  "$(CFG)" == "Debug"
.IF "$(CCTYPE)" == "MSVC20"
OPTIMIZE = -Od $(RUNTIME) -Z7 -D_DEBUG -DDEBUGGING
.ELSE
OPTIMIZE = -Od $(RUNTIME)d -Z7 -D_DEBUG -DDEBUGGING
.ENDIF
LINK_DBG = -debug -pdb:none
.ELSE
.IF "$(CCTYPE)" == "MSVC20"
OPTIMIZE = -O1 $(RUNTIME) -DNDEBUG
.ELSE
OPTIMIZE = -O1 $(RUNTIME) -DNDEBUG
.ENDIF
LINK_DBG = -release
.ENDIF

# we don't add LIBC here, the compiler do it based on -MD/-MT
LIBFILES = $(CRYPT_LIB) oldnames.lib kernel32.lib user32.lib gdi32.lib \
	winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib \
	oleaut32.lib netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
	version.lib odbc32.lib odbccp32.lib

CFLAGS   = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) $(PCHFLAGS) $(OPTIMIZE)
LINK_FLAGS  = -nologo $(LINK_DBG) -machine:$(PROCESSOR_ARCHITECTURE)
OBJOUT_FLAG = -Fo
EXEOUT_FLAG = -Fe

.ENDIF

#################### do not edit below this line #######################
############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############

o *= .obj

#
# Rules
# 

.SUFFIXES : .c $(o) .dll .lib .exe .a

.c$(o):
	$(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS) $(OBJOUT_FLAG)$@ $<

.y.c:
	$(NOOP)

$(o).dll:
.IF "$(CCTYPE)" == "BORLAND"
	$(LINK32) -Tpd -ap $(LINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
	$(IMPLIB) $(*B).lib $@
.ELIF "$(CCTYPE)" == "GCC"
	$(LINK32) -o $@ $(LINK_FLAGS) $< $(LIBFILES)
	$(IMPLIB) -def $(*B).def $(*B).lib $@
.ELSE
	$(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
	    -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)  
.ENDIF

#
INST_BIN=$(INST_TOP)\bin
INST_LIB=$(INST_TOP)\lib
INST_POD=$(INST_LIB)\pod
INST_HTML=$(INST_POD)\html
LIBDIR=..\lib
EXTDIR=..\ext
PODDIR=..\pod
EXTUTILSDIR=$(LIBDIR)\extutils

#
# various targets
PERLIMPLIB=..\perl.lib
MINIPERL=..\miniperl.exe
PERLDLL=..\perl.dll
PERLEXE=..\perl.exe
GLOBEXE=..\perlglob.exe
CONFIGPM=..\lib\Config.pm
MINIMOD=..\lib\ExtUtils\Miniperl.pm
X2P=..\x2p\a2p.exe

PL2BAT=bin\pl2bat.pl
GLOBBAT = bin\perlglob.bat

.IF "$(CCTYPE)" == "BORLAND"

CFGSH_TMPL = config.bc
CFGH_TMPL = config_H.bc

.ELIF "$(CCTYPE)" == "GCC"

CFGSH_TMPL = config.gc
CFGH_TMPL = config_H.gc

.ELSE

CFGSH_TMPL = config.vc
CFGH_TMPL = config_H.vc
PERL95EXE=..\perl95.exe

.ENDIF

XCOPY=xcopy /f /r /i /d
RCOPY=xcopy /f /r /i /e /d
NOOP=@echo
#NULL=

.IF "$(CRYPT_SRC)" != ""
CRYPT_OBJ=$(CRYPT_SRC:db:+$(o))
.ENDIF

.IF "$(PERL_MALLOC)" == "define"
MALLOC_SRC	= ..\malloc.c
MALLOC_OBJ	= ..\malloc$(o)
.ENDIF

#
# filenames given to xsubpp must have forward slashes (since it puts
# full pathnames in #line strings)
XSUBPP=..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp -C++ -prototypes

CORE_C=	..\av.c		\
	..\byterun.c	\
	..\deb.c	\
	..\doio.c	\
	..\doop.c	\
	..\dump.c	\
	..\globals.c	\
	..\gv.c		\
	..\hv.c		\
	..\mg.c		\
	..\op.c		\
	..\perl.c	\
	..\perlio.c	\
	..\perly.c	\
	..\pp.c		\
	..\pp_ctl.c	\
	..\pp_hot.c	\
	..\pp_sys.c	\
	..\regcomp.c	\
	..\regexec.c	\
	..\run.c	\
	..\scope.c	\
	..\sv.c		\
	..\taint.c	\
	..\toke.c	\
	..\universal.c	\
	..\util.c	\
	$(MALLOC_SRC)	\
	$(CRYPT_SRC)

CORE_OBJ= ..\av$(o)	\
	..\byterun$(o)	\
	..\deb$(o)	\
	..\doio$(o)	\
	..\doop$(o)	\
	..\dump$(o)	\
	..\globals$(o)	\
	..\gv$(o)	\
	..\hv$(o)	\
	..\mg$(o)	\
	..\op$(o)	\
	..\perl$(o)	\
	..\perlio$(o)	\
	..\perly$(o)	\
	..\pp$(o)	\
	..\pp_ctl$(o)	\
	..\pp_hot$(o)	\
	..\pp_sys$(o)	\
	..\regcomp$(o)	\
	..\regexec$(o)	\
	..\run$(o)	\
	..\scope$(o)	\
	..\sv$(o)	\
	..\taint$(o)	\
	..\toke$(o)	\
	..\universal$(o)\
	..\util$(o)	\
	$(MALLOC_OBJ)	\
	$(CRYPT_OBJ)

WIN32_C = perllib.c \
	win32.c \
	win32sck.c \
	win32thread.c 

WIN32_OBJ = win32$(o) \
	win32sck$(o) \
	win32thread$(o)

PERL95_OBJ = perl95$(o) \
	win32mt$(o) \
	win32sckmt$(o) \
	$(CRYPT_OBJ)

DLL_OBJ = perllib$(o) $(DYNALOADER)$(o)

X2P_OBJ = ..\x2p\a2p$(o)	\
	..\x2p\hash$(o)		\
	..\x2p\str$(o)		\
	..\x2p\util$(o)		\
	..\x2p\walk$(o)

CORE_H = ..\av.h	\
	..\byterun.h	\
	..\bytecode.h	\
	..\cop.h	\
	..\cv.h		\
	..\dosish.h	\
	..\embed.h	\
	..\form.h	\
	..\gv.h		\
	..\handy.h	\
	..\hv.h		\
	..\mg.h		\
	..\nostdio.h	\
	..\op.h		\
	..\opcode.h	\
	..\perl.h	\
	..\perlio.h	\
	..\perlsdio.h	\
	..\perlsfio.h	\
	..\perly.h	\
	..\pp.h		\
	..\proto.h	\
	..\regexp.h	\
	..\scope.h	\
	..\sv.h		\
	..\thread.h	\
	..\unixish.h	\
	..\util.h	\
	..\XSUB.h	\
	.\config.h	\
	..\EXTERN.h	\
	..\perlvars.h	\
	..\intrpvar.h	\
	..\thrdvar.h	\
	.\include\dirent.h	\
	.\include\netdb.h	\
	.\include\sys\socket.h	\
	.\win32.h

DYNAMIC_EXT=Socket IO Fcntl Opcode SDBM_File attrs Thread B
STATIC_EXT=DynaLoader

DYNALOADER=$(EXTDIR)\DynaLoader\DynaLoader
SOCKET=$(EXTDIR)\Socket\Socket
FCNTL=$(EXTDIR)\Fcntl\Fcntl
OPCODE=$(EXTDIR)\Opcode\Opcode
SDBM_FILE=$(EXTDIR)\SDBM_File\SDBM_File
IO=$(EXTDIR)\IO\IO
ATTRS=$(EXTDIR)\attrs\attrs
THREAD=$(EXTDIR)\Thread\Thread
B=$(EXTDIR)\B\B

SOCKET_DLL=..\lib\auto\Socket\Socket.dll
FCNTL_DLL=..\lib\auto\Fcntl\Fcntl.dll
OPCODE_DLL=..\lib\auto\Opcode\Opcode.dll
SDBM_FILE_DLL=..\lib\auto\SDBM_File\SDBM_File.dll
IO_DLL=..\lib\auto\IO\IO.dll
ATTRS_DLL=..\lib\auto\attrs\attrs.dll
THREAD_DLL=..\lib\auto\Thread\Thread.dll
B_DLL=..\lib\auto\B\B.dll

STATICLINKMODULES=DynaLoader
DYNALOADMODULES=	\
	$(SOCKET_DLL)	\
	$(FCNTL_DLL)	\
	$(OPCODE_DLL)	\
	$(SDBM_FILE_DLL)\
	$(IO_DLL)	\
	$(ATTRS_DLL)	\
	$(THREAD_DLL)	\
	$(B_DLL)

POD2HTML=$(PODDIR)\pod2html
POD2MAN=$(PODDIR)\pod2man
POD2LATEX=$(PODDIR)\pod2latex
POD2TEXT=$(PODDIR)\pod2text

CFG_VARS=   "INST_DRV=$(INST_DRV)"		\
	    "INST_TOP=$(INST_TOP)"		\
	    "archname=$(ARCHNAME)"		\
	    "cc=$(CC)"				\
	    "ccflags=$(OPTIMIZE) $(DEFINES)"	\
	    "cf_email=$(EMAIL)"			\
	    "d_crypt=$(D_CRYPT)"		\
	    "d_mymalloc=$(PERL_MALLOC)"		\
	    "libs=$(LIBFILES:f)"		\
	    "incpath=$(CCINCDIR)"		\
	    "libpth=$(strip $(CCLIBDIR) $(LIBFILES:d))" \
	    "libc=$(LIBC)"			\
	    "static_ext=$(STATIC_EXT)"		\
	    "dynamic_ext=$(DYNAMIC_EXT)"	\
	    "usethreads=$(USE_THREADS)"		\
	    "LINK_FLAGS=$(LINK_FLAGS)"		\
	    "optimize=$(OPTIMIZE)"

#
# Top targets
#

all: $(PERLEXE) $(PERL95EXE) $(GLOBEXE) $(DYNALOADMODULES) $(MINIMOD) \
	$(X2P)

$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c

#------------------------------------------------------------

$(GLOBEXE): perlglob$(o)
.IF "$(CCTYPE)" == "BORLAND"
	$(CC) -c -w -v -tWM -I$(CCINCDIR) perlglob.c
	$(LINK32) -Tpe -ap $(LINK_FLAGS) c0x32$(o) perlglob$(o) \
	    $(CCLIBDIR)\32BIT\wildargs$(o),$@,,import32.lib cw32mt.lib,
.ELIF "$(CCTYPE)" == "GCC"
	$(LINK32) $(LINK_FLAGS) -o $@ perlglob$(o) $(LIBFILES)
.ELSE
	$(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
	    perlglob$(o) setargv$(o) 
.ENDIF

perlglob$(o)  : perlglob.c

..\miniperlmain$(o) : ..\miniperlmain.c $(CORE_H)

config.w32 : $(CFGSH_TMPL)
	copy $(CFGSH_TMPL) config.w32

.\config.h : $(CFGH_TMPL)
	-del /f config.h
	copy $(CFGH_TMPL) config.h

..\config.sh : config.w32 $(MINIPERL) config_sh.PL
	$(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh

# this target is for when changes to the main config.sh happen
# edit config.{b,v,g}c and make this target once for each supported
# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
regen_config_h:
	perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
	-cd .. && del /f perl.exe
	cd .. && perl configpm
	-del /f $(CFGH_TMPL)
	-mkdir ..\lib\CORE
	-perl -I..\lib config_h.PL
	rename config.h $(CFGH_TMPL)

$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
	cd .. && miniperl configpm
	if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
	$(XCOPY) ..\*.h $(COREDIR)\*.*
	$(XCOPY) *.h $(COREDIR)\*.*
	$(RCOPY) include $(COREDIR)\*.*
	$(MINIPERL) -I..\lib config_h.PL || $(MAKE) $(MAKEMACROS) $(CONFIGPM)

LKPRE = INPUT (
LKPOST = )

$(MINIPERL) : ..\miniperlmain$(o) $(CORE_OBJ) $(WIN32_OBJ)
.IF "$(CCTYPE)" == "BORLAND"
	$(LINK32) -Tpe -ap $(LINK_FLAGS) \
	    @$(mktmp c0x32$(o) ..\miniperlmain$(o) \
		$(CORE_OBJ:s,\,\\) $(WIN32_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
.ELIF "$(CCTYPE)" == "GCC"
	$(LINK32) -v -o $@ $(LINK_FLAGS) \
	    $(mktmp $(LKPRE) ..\miniperlmain$(o) \
		$(CORE_OBJ:s,\,\\) $(WIN32_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
.ELSE
	$(LINK32) -subsystem:console -out:$@ \
	    @$(mktmp $(LINK_FLAGS) $(LIBFILES) ..\miniperlmain$(o) \
		$(CORE_OBJ:s,\,\\) $(WIN32_OBJ:s,\,\\))
.ENDIF

$(WIN32_OBJ) : $(CORE_H)
$(CORE_OBJ)  : $(CORE_H)
$(DLL_OBJ)   : $(CORE_H) 
$(X2P_OBJ)   : $(CORE_H) 

perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym makedef.pl
	$(MINIPERL) -w makedef.pl $(OPTIMIZE) $(DEFINES) \
	    CCTYPE=$(CCTYPE) > perldll.def

$(PERLDLL): perldll.def $(CORE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
.IF "$(CCTYPE)" == "BORLAND"
	$(LINK32) -Tpd -ap $(LINK_FLAGS) \
	    @$(mktmp c0d32$(o) $(CORE_OBJ:s,\,\\) \
		$(WIN32_OBJ:s,\,\\) $(DLL_OBJ:s,\,\\)\n \
		$@,\n \
		$(LIBFILES)\n \
		perldll.def\n)
	$(IMPLIB) $*.lib $@
.ELIF "$(CCTYPE)" == "GCC"
	$(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(LINK_FLAGS) \
	    $(mktmp $(LKPRE) $(CORE_OBJ:s,\,\\) $(WIN32_OBJ:s,\,\\) \
	        $(DLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
	dlltool --output-lib $(PERLIMPLIB) \
                --dllname perl.dll \
                --def perldll.def \
                --base-file perl.base \
                --output-exp perl.exp
	$(LINK32) -mdll -o $@ $(LINK_FLAGS) \
	    $(mktmp $(LKPRE) $(CORE_OBJ:s,\,\\) $(WIN32_OBJ:s,\,\\) \
	        $(DLL_OBJ:s,\,\\) $(LIBFILES) perl.exp $(LKPOST))
.ELSE
	$(LINK32) -dll -def:perldll.def -out:$@ \
	    @$(mktmp $(LINK_FLAGS) $(LIBFILES) $(CORE_OBJ:s,\,\\) \
		$(WIN32_OBJ:s,\,\\) $(DLL_OBJ:s,\,\\))
.ENDIF
	$(XCOPY) $(PERLIMPLIB) $(COREDIR)

perl.def  : $(MINIPERL) makeperldef.pl
	$(MINIPERL) -I..\lib makeperldef.pl $(NULL) > perl.def

$(MINIMOD) : $(MINIPERL) ..\minimod.pl
	cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm

$(X2P) : $(X2P_OBJ)
	$(MINIPERL) ..\x2p\find2perl.PL
	$(MINIPERL) ..\x2p\s2p.PL
.IF "$(CCTYPE)" == "BORLAND"
	$(LINK32) -Tpe -ap $(LINK_FLAGS) \
	    @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
.ELIF "$(CCTYPE)" == "GCC"
	$(LINK32) -v -o $@ $(LINK_FLAGS) \
	    $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
.ELSE
	$(LINK32) -subsystem:console -out:$@ \
	    @$(mktmp $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\)
.ENDIF

perlmain.c : runperl.c 
	copy runperl.c perlmain.c

perlmain$(o) : perlmain.c
	$(CC) $(CFLAGS) -UPERLDLL $(EXEOUT_FLAG)$@ -c perlmain.c

$(PERLEXE): $(PERLDLL) $(CONFIGPM) perlmain$(o)  
.IF "$(CCTYPE)" == "BORLAND"
	$(LINK32) -Tpe -ap $(LINK_FLAGS) \
	    @$(mktmp c0x32$(o) perlmain$(o) $(WINIOMAYBE)\n \
	    $@,\n \
	    $(PERLIMPLIB) $(LIBFILES)\n)
.ELIF "$(CCTYPE)" == "GCC"
	$(LINK32) -o $@ $(LINK_FLAGS)  \
	    perlmain.o $(WINIOMAYBE) $(PERLIMPLIB) $(LIBFILES)
.ELSE
	$(LINK32) -subsystem:console -out:$@ $(LINK_FLAGS) $(LIBFILES) \
	    perlmain$(o) $(WINIOMAYBE) $(PERLIMPLIB) 
.ENDIF
	copy splittree.pl .. 
	$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" "../LIB/auto"

.IF "$(CCTYPE)" != "BORLAND"
.IF "$(CCTYPE)" != "GCC"

perl95.c : runperl.c 
	copy runperl.c perl95.c

perl95$(o) : perl95.c
	$(CC) $(CFLAGS) -MT -UPERLDLL -DWIN95FIX -c perl95.c

win32sckmt$(o) : win32sck.c
	$(CC) $(CFLAGS) -MT -UPERLDLL -DWIN95FIX -c $(OBJOUT_FLAG)win32sckmt$(o) win32sck.c

win32mt$(o) : win32.c
	$(CC) $(CFLAGS) -MT -UPERLDLL -DWIN95FIX -c $(OBJOUT_FLAG)win32mt$(o) win32.c

$(PERL95EXE): $(PERLDLL) $(CONFIGPM) $(PERL95_OBJ)
	$(LINK32) -subsystem:console -out:$@ $(LINK_FLAGS) $(LIBFILES) \
	    $(PERL95_OBJ) $(PERLIMPLIB) 

.ENDIF
.ENDIF

$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
	if not exist ..\lib\auto mkdir ..\lib\auto
	$(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
	cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
	$(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .

$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
	copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs

$(B_DLL): $(PERLEXE) $(B).xs
	cd $(EXTDIR)\$(*B) && \
	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
	cd $(EXTDIR)\$(*B) && $(MAKE)

$(THREAD_DLL): $(PERLEXE) $(THREAD).xs
	cd $(EXTDIR)\$(*B) && \
	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
	cd $(EXTDIR)\$(*B) && $(MAKE)

$(ATTRS_DLL): $(PERLEXE) $(ATTRS).xs
	cd $(EXTDIR)\$(*B) && \
	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
	cd $(EXTDIR)\$(*B) && $(MAKE)

$(IO_DLL): $(PERLEXE) $(IO).xs
	cd $(EXTDIR)\$(*B) && \
	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
	cd $(EXTDIR)\$(*B) && $(MAKE)

$(SDBM_FILE_DLL) : $(PERLEXE) $(SDBM_FILE).xs
	cd $(EXTDIR)\$(*B) && \
	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
	cd $(EXTDIR)\$(*B) && $(MAKE)

$(FCNTL_DLL): $(PERLEXE) $(FCNTL).xs
	cd $(EXTDIR)\$(*B) && \
	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
	cd $(EXTDIR)\$(*B) && $(MAKE)

$(OPCODE_DLL): $(PERLEXE) $(OPCODE).xs
	cd $(EXTDIR)\$(*B) && \
	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
	cd $(EXTDIR)\$(*B) && $(MAKE)

$(SOCKET_DLL): $(PERLEXE) $(SOCKET).xs
	cd $(EXTDIR)\$(*B) && \
	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
	cd $(EXTDIR)\$(*B) && $(MAKE)

doc: $(PERLEXE)
	cd ..\pod && $(MAKE) -f ..\win32\pod.mak checkpods \
		pod2html pod2latex pod2man pod2text
	cd ..\pod && $(XCOPY) *.bat ..\win32\bin\*.*
	copy ..\README.win32 ..\pod\perlwin32.pod
	$(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
	    --podpath=pod:lib:ext:utils --htmlroot="//$(INST_HTML:s,:,|,)" \
	    --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse

utils: $(PERLEXE)
	cd ..\utils && $(MAKE) PERL=$(MINIPERL)
	cd ..\utils && $(PERLEXE) ..\win32\$(PL2BAT) h2ph splain perlbug \
		pl2pm c2ph h2xs perldoc pstruct
	$(XCOPY) ..\utils\*.bat bin\*.*
	$(PERLEXE) -I..\lib $(PL2BAT) bin\network.pl bin\www.pl bin\runperl.pl \
			bin\pl2bat.pl bin\perlglob.pl

distclean: clean
	-del /f $(MINIPERL) $(PERLEXE) $(PERL95EXE) $(PERLDLL) $(GLOBEXE) \
		$(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
	-del /f *.def *.map
	-del /f $(SOCKET_DLL) $(IO_DLL) $(SDBM_FILE_DLL) $(FCNTL_DLL) \
		$(OPCODE_DLL) $(ATTRS_DLL) $(THREAD_DLL) $(B_DLL)
	-del /f $(SOCKET).c $(IO).c $(SDBM_FILE).c $(FCNTL).c $(OPCODE).c \
		$(DYNALOADER).c $(ATTRS).c $(THREAD).c $(B).c
	-del /f $(PODDIR)\*.html
	-del /f $(PODDIR)\*.bat
	-del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
.IF "$(PERL95EXE)" != ""
	-del /f perl95.c
.ENDIF
	-del /f bin\*.bat
	-cd $(EXTDIR) && del /s *.lib *.def *.map *.bs Makefile *$(o) pm_to_blib
	-rmdir /s /q ..\lib\auto || rmdir /s ..\lib\auto
	-rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)

install : all doc utils
	$(PERLEXE) ..\installperl
.IF "$(PERL95EXE)" != ""
	$(XCOPY) $(PERL95EXE) $(INST_BIN)\*.*
.ENDIF
	$(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
	$(XCOPY) bin\*.bat $(INST_BIN)\*.*
	$(XCOPY) ..\pod\*.bat $(INST_BIN)\*.*
	$(RCOPY) html\*.* $(INST_HTML)\*.*

inst_lib : $(CONFIGPM)
	copy splittree.pl .. 
	$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" "../LIB/auto"
	$(RCOPY) ..\lib $(INST_LIB)\*.*

minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
	$(XCOPY) $(MINIPERL) ..\t\perl.exe
.IF "$(CCTYPE)" == "BORLAND"
	$(XCOPY) $(GLOBBAT) ..\t\$(NULL)
.ELSE
	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
.ENDIF
	attrib -r ..\t\*.*
	copy test ..\t
	cd ..\t && \
	$(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t

test-prep : all utils
	$(XCOPY) $(PERLEXE) ..\t\$(NULL)
	$(XCOPY) $(PERLDLL) ..\t\$(NULL)
.IF "$(CCTYPE)" == "BORLAND"
	$(XCOPY) $(GLOBBAT) ..\t\$(NULL)
.ELSE
	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
.ENDIF

test : test-prep
	cd ..\t && $(PERLEXE) -I..\lib harness

test-notty : test-prep
	set PERL_SKIP_TTY_TEST=1 && \
	cd ..\t && $(PERLEXE) -I.\lib harness

clean : 
	-@erase miniperlmain$(o)
	-@erase $(MINIPERL)
	-@erase perlglob$(o)
	-@erase perlmain$(o)
	-@erase config.w32
	-@erase /f config.h
	-@erase $(GLOBEXE)
	-@erase $(PERLEXE)
	-@erase $(PERLDLL)
	-@erase $(CORE_OBJ)
	-@erase $(WIN32_OBJ)
	-@erase $(DLL_OBJ)
	-@erase $(X2P_OBJ)
	-@erase ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp
	-@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
	-@erase ..\x2p\*.exe ..\x2p\*.bat
	-@erase *.ilk
	-@erase *.pdb