-/* HAS_SAFE_MEMCPY:
- * This symbol, if defined, indicates that the memcpy routine is available
- * to copy potentially overlapping memory blocks. Otherwise you should
- * probably use memmove() or memcpy(). If neither is defined, roll your
- * own version.
- */
-#$d_safemcpy HAS_SAFE_MEMCPY /**/
-
-/* HAS_SANE_MEMCMP:
- * This symbol, if defined, indicates that the memcmp routine is available
- * and can be used to compare relative magnitudes of chars with their high
- * bits set. If it is not defined, roll your own version.
- */
-#$d_sanemcmp HAS_SANE_MEMCMP /**/
-
-/* HAS_SIGACTION:
- * This symbol, if defined, indicates that Vr4's sigaction() routine
- * is available.
- */
-#$d_sigaction HAS_SIGACTION /**/
-
-/* Sigjmp_buf:
- * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
- */
-/* Sigsetjmp:
- * This macro is used in the same way as sigsetjmp(), but will invoke
- * traditional setjmp() if sigsetjmp isn't available.
- * See HAS_SIGSETJMP.
- */
-/* Siglongjmp:
- * This macro is used in the same way as siglongjmp(), but will invoke
- * traditional longjmp() if siglongjmp isn't available.
- * See HAS_SIGSETJMP.
- */
-#$d_sigsetjmp HAS_SIGSETJMP /**/
-#ifdef HAS_SIGSETJMP
-#define Sigjmp_buf sigjmp_buf
-#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
-#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
-#else
-#define Sigjmp_buf jmp_buf
-#define Sigsetjmp(buf,save_mask) setjmp((buf))
-#define Siglongjmp(buf,retval) longjmp((buf),(retval))
-#endif
-
-/* USE_STDIO_PTR:
- * This symbol is defined if the _ptr and _cnt fields (or similar)
- * of the stdio FILE structure can be used to access the stdio buffer
- * for a file handle. If this is defined, then the FILE_ptr(fp)
- * and FILE_cnt(fp) macros will also be defined and should be used
- * to access these fields.
- */
-/* FILE_ptr:
- * This macro is used to access the _ptr field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_PTR is defined.
- */
-/* STDIO_PTR_LVALUE:
- * This symbol is defined if the FILE_ptr macro can be used as an
- * lvalue.
- */
-/* FILE_cnt:
- * This macro is used to access the _cnt field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_PTR is defined.
- */
-/* STDIO_CNT_LVALUE:
- * This symbol is defined if the FILE_cnt macro can be used as an
- * lvalue.
- */
-#$d_stdstdio USE_STDIO_PTR /**/
-#ifdef USE_STDIO_PTR
-#define FILE_ptr(fp) $stdio_ptr
-#$d_stdio_ptr_lval STDIO_PTR_LVALUE /**/
-#define FILE_cnt(fp) $stdio_cnt
-#$d_stdio_cnt_lval STDIO_CNT_LVALUE /**/
-#endif
-
-/* USE_STDIO_BASE:
- * This symbol is defined if the _base field (or similar) of the
- * stdio FILE structure can be used to access the stdio buffer for
- * a file handle. If this is defined, then the FILE_base(fp) macro
- * will also be defined and should be used to access this field.
- * Also, the FILE_bufsiz(fp) macro will be defined and should be used
- * to determine the number of bytes in the buffer. USE_STDIO_BASE
- * will never be defined unless USE_STDIO_PTR is.
- */
-/* FILE_base:
- * This macro is used to access the _base field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_BASE is defined.
- */
-/* FILE_bufsiz:
- * This macro is used to determine the number of bytes in the I/O
- * buffer pointed to by _base field (or equivalent) of the FILE
- * structure pointed to its argument. This macro will always be defined
- * if USE_STDIO_BASE is defined.
- */
-#$d_stdiobase USE_STDIO_BASE /**/
-#ifdef USE_STDIO_BASE
-#define FILE_base(fp) $stdio_base
-#define FILE_bufsiz(fp) $stdio_bufsiz
-#endif
-
-/* HAS_VPRINTF:
- * This symbol, if defined, indicates that the vprintf routine is available
- * to printf with a pointer to an argument list. If unavailable, you
- * may need to write your own, probably in terms of _doprnt().
- */
-/* USE_CHAR_VSPRINTF:
- * This symbol is defined if this system has vsprintf() returning type
- * (char*). The trend seems to be to declare it as "int vsprintf()". It
- * is up to the package author to declare vsprintf correctly based on the
- * symbol.
- */
-#$d_vprintf HAS_VPRINTF /**/
-#$d_charvspr USE_CHAR_VSPRINTF /**/
-
-/* DOUBLESIZE:
- * This symbol contains the size of a double, so that the C preprocessor
- * can make decisions based on it.
- */
-#define DOUBLESIZE $doublesize /**/
-
-/* I_TIME:
- * This symbol, if defined, indicates to the C program that it should
- * include <time.h>.
- */
-/* I_SYS_TIME:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/time.h>.
- */
-/* I_SYS_TIME_KERNEL:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/time.h> with KERNEL defined.
- */
-#$i_time I_TIME /**/
-#$i_systime I_SYS_TIME /**/
-#$i_systimek I_SYS_TIME_KERNEL /**/
-
-/* INTSIZE:
- * This symbol contains the value of sizeof(int) so that the C
- * preprocessor can make decisions based on it.
- */
-/* LONGSIZE:
- * This symbol contains the value of sizeof(long) so that the C
- * preprocessor can make decisions based on it.
- */
-/* SHORTSIZE:
- * This symbol contains the value of sizeof(short) so that the C
- * preprocessor can make decisions based on it.
- */
-#define INTSIZE $intsize /**/
-#define LONGSIZE $longsize /**/
-#define SHORTSIZE $shortsize /**/
-
-/* VAL_O_NONBLOCK:
- * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
- * non-blocking I/O for the file descriptor. Note that there is no way
- * back, i.e. you cannot turn it blocking again this way. If you wish to
- * alternatively switch between blocking and non-blocking, use the
- * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
- */
-/* VAL_EAGAIN:
- * This symbol holds the errno error code set by read() when no data was
- * present on the non-blocking file descriptor.
- */
-/* RD_NODATA:
- * This symbol holds the return code from read() when no data is present
- * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
- * not defined, then you can't distinguish between no data and EOF by
- * issuing a read(). You'll have to find another way to tell for sure!
- */
-/* EOF_NONBLOCK:
- * This symbol, if defined, indicates to the C program that a read() on
- * a non-blocking file descriptor will return 0 on EOF, and not the value
- * held in RD_NODATA (-1 usually, in that case!).
- */
-#define VAL_O_NONBLOCK $o_nonblock
-#define VAL_EAGAIN $eagain
-#define RD_NODATA $rd_nodata
-#$d_eofnblk EOF_NONBLOCK
-
-/* PTRSIZE:
- * This symbol contains the size of a pointer, so that the C preprocessor
- * can make decisions based on it. It will be sizeof(void *) if
- * the compiler supports (void *); otherwise it will be
- * sizeof(char *).
- */
-#define PTRSIZE $ptrsize /**/
-
-/* Drand01:
- * This macro is to be used to generate uniformly distributed
- * random numbers over the range [0., 1.[. You may have to supply
- * an 'extern double drand48();' in your program since SunOS 4.1.3
- * doesn't provide you with anything relevant in it's headers.
- * See HAS_DRAND48_PROTO.
- */
-/* Rand_seed_t:
- * This symbol defines the type of the argument of the
- * random seed function.
- */
-/* seedDrand01:
- * This symbol defines the macro to be used in seeding the
- * random number generator (see Drand01).
- */
-/* RANDBITS:
- * This symbol indicates how many bits are produced by the
- * function used to generate normalized random numbers.
- * Values include 15, 16, 31, and 48.
- */
-#define Drand01() $drand01 /**/
-#define Rand_seed_t $randseedtype /**/
-#define seedDrand01(x) $seedfunc((Rand_seed_t)x) /**/
-#define RANDBITS $randbits /**/
-
-/* SSize_t:
- * This symbol holds the type used by functions that return
- * a count of bytes or an error condition. It must be a signed type.
- * It is usually ssize_t, but may be long or int, etc.
- * It may be necessary to include <sys/types.h> or <unistd.h>
- * to get any typedef'ed information.
- * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
- */
-#define SSize_t $ssizetype /* signed count of bytes */
-
-/* EBCDIC:
- * This symbol, if defined, indicates that this system uses
- * EBCDIC encoding.
- */
-#$ebcdic EBCDIC /**/
-
-/* OSNAME:
- * This symbol contains the name of the operating system, as determined
- * by Configure. You shouldn't rely on it too much; the specific
- * feature tests from Configure are generally more reliable.
- */
-#define OSNAME "$osname" /**/
-
-/* CAT2:
- * This macro catenates 2 tokens together.
- */
-/* STRINGIFY:
- * This macro surrounds its token with double quotes.
- */
-#if $cpp_stuff == 1
-#define CAT2(a,b)a/**/b
-#define STRINGIFY(a)"a"
- /* If you can get stringification with catify, tell me how! */
-#endif
-#if $cpp_stuff == 42
-#define CAT2(a,b)a ## b
-#define StGiFy(a)# a
-#define STRINGIFY(a)StGiFy(a)
-#endif
-#if $cpp_stuff != 1 && $cpp_stuff != 42
-#include "Bletch: How does this C preprocessor catenate tokens?"
-#endif
-
-/* CPPSTDIN:
- * This symbol contains the first part of the string which will invoke
- * the C preprocessor on the standard input and produce to standard
- * output. Typical value of "cc -E" or "/lib/cpp", but it can also
- * call a wrapper. See CPPRUN.
- */
-/* CPPMINUS:
- * This symbol contains the second part of the string which will invoke
- * the C preprocessor on the standard input and produce to standard
- * output. This symbol will have the value "-" if CPPSTDIN needs a minus
- * to specify standard input, otherwise the value is "".
- */
-#define CPPSTDIN "$cppstdin"
-#define CPPMINUS "$cppminus"
-
-/* HAS_ACCESS:
- * This manifest constant lets the C program know that the access()
- * system call is available to check for accessibility using real UID/GID.
- * (always present on UNIX.)
- */
-#$d_access HAS_ACCESS /**/
-
-/* CSH:
- * This symbol, if defined, contains the full pathname of csh.
- */
-#$d_csh HAS_CSH /**/
-#ifdef HAS_CSH
-#define CSH "$full_csh" /**/
-#endif
-
-/* HAS_ENDGRENT:
- * This symbol, if defined, indicates that the getgrent routine is
- * available for finalizing sequential access of the group database.
- */
-#$d_endgrent HAS_ENDGRENT /**/
-
-/* HAS_ENDHOSTENT:
- * This symbol, if defined, indicates that the endhostent() routine is
- * available to close whatever was being used for host queries.
- */
-#$d_endhent HAS_ENDHOSTENT /**/
-
-/* HAS_ENDNETENT:
- * This symbol, if defined, indicates that the endnetent() routine is
- * available to close whatever was being used for network queries.
- */
-#$d_endnent HAS_ENDNETENT /**/
-
-/* HAS_ENDPROTOENT:
- * This symbol, if defined, indicates that the endprotoent() routine is
- * available to close whatever was being used for protocol queries.
- */
-#$d_endpent HAS_ENDPROTOENT /**/
-
-/* HAS_ENDPWENT:
- * This symbol, if defined, indicates that the getgrent routine is
- * available for finalizing sequential access of the passwd database.