X-Git-Url: https://perl5.git.perl.org/perl5.git/blobdiff_plain/824a2ba35a8a435c7dda7b79d43bec16c40e4bd9..dc51f0553536ed6e3e72d425a39b80d5b5e53ba5:/config_h.SH?ds=sidebyside diff --git a/config_h.SH b/config_h.SH index bfdb62a..2b45b15 100644 --- a/config_h.SH +++ b/config_h.SH @@ -44,17 +44,6 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #define LOC_SED "$full_sed" /**/ -/* BIN: - * This symbol holds the path of the bin directory where the package will - * be installed. Program must be prepared to deal with ~name substitution. - */ -/* BIN_EXP: - * This symbol is the filename expanded version of the BIN symbol, for - * programs that do not want to deal with that at run-time. - */ -#define BIN "$bin" /**/ -#define BIN_EXP "$binexp" /**/ - /* HAS_ALARM: * This symbol, if defined, indicates that the alarm routine is * available. @@ -242,13 +231,6 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$d_getgrps HAS_GETGROUPS /**/ -/* HAS_UNAME: - * This symbol, if defined, indicates that the C program may use the - * uname() routine to derive the host name. See also HAS_GETHOSTNAME - * and PHOSTNAME. - */ -#$d_uname HAS_UNAME /**/ - /* HAS_GETLOGIN: * This symbol, if defined, indicates that the getlogin routine is * available to get the login name. @@ -700,11 +682,6 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$d_umask HAS_UMASK /**/ -/* HAS_VFORK: - * This symbol, if defined, indicates that vfork() exists. - */ -#$d_vfork HAS_VFORK /**/ - /* HASVOLATILE: * This symbol, if defined, indicates that this C compiler knows about * the volatile declaration. @@ -1021,6 +998,53 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #define STDCHAR $stdchar /**/ +/* CROSSCOMPILE: + * This symbol, if defined, signifies that we our + * build process is a cross-compilation. + */ +#$crosscompile CROSSCOMPILE /**/ + +/* INTSIZE: + * This symbol contains the value of sizeof(int) so that the C + * preprocessor can make decisions based on it. + */ +/* LONGSIZE: + * This symbol contains the value of sizeof(long) so that the C + * preprocessor can make decisions based on it. + */ +/* SHORTSIZE: + * This symbol contains the value of sizeof(short) so that the C + * preprocessor can make decisions based on it. + */ +#define INTSIZE $intsize /**/ +#define LONGSIZE $longsize /**/ +#define SHORTSIZE $shortsize /**/ + +/* MULTIARCH: + * This symbol, if defined, signifies that the build + * process will produce some binary files that are going to be + * used in a cross-platform environment. This is the case for + * example with the NeXT "fat" binaries that contain executables + * for several CPUs. + */ +#$multiarch MULTIARCH /**/ + +/* HAS_QUAD: + * This symbol, if defined, tells that there's a 64-bit integer type, + * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one + * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T. + */ +#$d_quad HAS_QUAD /**/ +#ifdef HAS_QUAD +# define Quad_t $quadtype /**/ +# define Uquad_t $uquadtype /**/ +# define QUADKIND $quadkind /**/ +# define QUAD_IS_INT 1 +# define QUAD_IS_LONG 2 +# define QUAD_IS_LONG_LONG 3 +# define QUAD_IS_INT64_T 4 +#endif + /* HAS_ACCESSX: * This symbol, if defined, indicates that the accessx routine is * available to do extended access checks. @@ -1045,20 +1069,85 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$i_syssecrt I_SYS_SECURITY /**/ +/* OSNAME: + * This symbol contains the name of the operating system, as determined + * by Configure. You shouldn't rely on it too much; the specific + * feature tests from Configure are generally more reliable. + */ +#define OSNAME "$osname" /**/ + /* MEM_ALIGNBYTES: - * This symbol contains the number of bytes required to align a - * double. Usual values are 2, 4 and 8. - * On NeXT starting with 3.2, you can build "Fat" Multiple Architecture - * Binaries (MAB) for targets with varying alignment. This only matters - * for perl, where the config.h can be generated and installed on one - * system, and used by a different architecture to build an extension. - * The default is eight, for safety. + * This symbol contains the number of bytes required to align a + * double. Usual values are 2, 4 and 8. The default is eight, + * for safety. + */ +#if defined(CROSSCOMPILE) || defined(MULTIARCH) +# define MEM_ALIGNBYTES 8 +#else +#define MEM_ALIGNBYTES $alignbytes +#endif + +/* ARCHLIB: + * This variable, if defined, holds the name of the directory in + * which the user wants to put architecture-dependent public + * library files for $package. It is most often a local directory + * such as /usr/local/lib. Programs using this variable must be + * prepared to deal with filename expansion. If ARCHLIB is the + * same as PRIVLIB, it is not defined, since presumably the + * program already searches PRIVLIB. + */ +/* ARCHLIB_EXP: + * This symbol contains the ~name expanded version of ARCHLIB, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. + */ +#$d_archlib ARCHLIB "$archlib" /**/ +#$d_archlib ARCHLIB_EXP "$archlibexp" /**/ + +/* ARCHNAME: + * This symbol holds a string representing the architecture name. + * It may be used to construct an architecture-dependant pathname + * where library files may be held under a private library, for + * instance. + */ +#define ARCHNAME "$archname" /**/ + +/* HAS_ATOLF: + * This symbol, if defined, indicates that the atolf routine is + * available to convert strings into long doubles. + */ +#$d_atolf HAS_ATOLF /**/ + +/* HAS_ATOLL: + * This symbol, if defined, indicates that the atoll routine is + * available to convert strings into long longs. */ -#define MEM_ALIGNBYTES $alignbytes /**/ +#$d_atoll HAS_ATOLL /**/ + +/* BIN: + * This symbol holds the path of the bin directory where the package will + * be installed. Program must be prepared to deal with ~name substitution. + */ +/* BIN_EXP: + * This symbol is the filename expanded version of the BIN symbol, for + * programs that do not want to deal with that at run-time. + */ +#define BIN "$bin" /**/ +#define BIN_EXP "$binexp" /**/ + +/* PERL_BINCOMPAT_5005: + * This symbol, if defined, indicates that Perl 5.006 should be + * binary-compatible with Perl 5.005. This is impossible for builds + * that use features like threads and multiplicity it is always $undef + * for those versions. + */ +#$d_bincompat5005 PERL_BINCOMPAT_5005 /**/ /* BYTEORDER: * This symbol holds the hexadecimal constant defined in byteorder, * i.e. 0x1234 or 0x4321, etc... + * If the compiler supports cross-compiling or multiple-architecture + * binaries (eg. on NeXT systems), use compiler-defined macros to + * determine the byte order. * On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture * Binaries (MAB) on either big endian or little endian machines. * The endian-ness is available at compile-time. This only matters @@ -1069,16 +1158,85 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- * so the default case (for NeXT) is big endian to catch them. * This might matter for NeXT 3.0. */ -#ifndef NeXT +#if defined(CROSSCOMPILE) || defined(MULTIARCH) +# ifdef __LITTLE_ENDIAN__ +# if LONGSIZE == 4 +# define BYTEORDER 0x1234 +# else +# if LONGSIZE == 8 +# define BYTEORDER 0x12345678 +# endif +# endif +# else +# ifdef __BIG_ENDIAN__ +# if LONGSIZE == 4 +# define BYTEORDER 0x4321 +# else +# if LONGSIZE == 8 +# define BYTEORDER 0x87654321 +# endif +# endif +# endif +# endif +# if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__)) +# define BYTEORDER 0x4321 +# endif +#else #define BYTEORDER 0x$byteorder /* large digits for MSB */ -#else /* NeXT */ -#ifdef __LITTLE_ENDIAN__ -#define BYTEORDER 0x1234 -#else /* __BIG_ENDIAN__ */ -#define BYTEORDER 0x4321 -#endif /* ENDIAN CHECK */ #endif /* NeXT */ +/* CAT2: + * This macro catenates 2 tokens together. + */ +/* STRINGIFY: + * This macro surrounds its token with double quotes. + */ +#if $cpp_stuff == 1 +#define CAT2(a,b)a/**/b +#define STRINGIFY(a)"a" + /* If you can get stringification with catify, tell me how! */ +#endif +#if $cpp_stuff == 42 +#define CAT2(a,b)a ## b +#define StGiFy(a)# a +#define STRINGIFY(a)StGiFy(a) +#endif +#if $cpp_stuff != 1 && $cpp_stuff != 42 +#include "Bletch: How does this C preprocessor catenate tokens?" +#endif + +/* CPPSTDIN: + * This symbol contains the first part of the string which will invoke + * the C preprocessor on the standard input and produce to standard + * output. Typical value of "cc -E" or "/lib/cpp", but it can also + * call a wrapper. See CPPRUN. + */ +/* CPPMINUS: + * This symbol contains the second part of the string which will invoke + * the C preprocessor on the standard input and produce to standard + * output. This symbol will have the value "-" if CPPSTDIN needs a minus + * to specify standard input, otherwise the value is "". + */ +/* CPPRUN: + * This symbol contains the string which will invoke a C preprocessor on + * the standard input and produce to standard output. It needs to end + * with CPPLAST, after all other preprocessor flags have been specified. + * The main difference with CPPSTDIN is that this program will never be a + * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is + * available directly to the user. Note that it may well be different from + * the preprocessor used to compile the C program. + */ +#define CPPSTDIN "$cppstdin" +#define CPPMINUS "$cppminus" +#define CPPRUN "$cpprun" + +/* HAS_ACCESS: + * This manifest constant lets the C program know that the access() + * system call is available to check for accessibility using real UID/GID. + * (always present on UNIX.) + */ +#$d_access HAS_ACCESS /**/ + /* CASTI32: * This symbol is defined if the C compiler can cast negative * or large floating point numbers to 32-bit ints. @@ -1106,6 +1264,104 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$d_void_closedir VOID_CLOSEDIR /**/ +/* HAS_CSH: + * This symbol, if defined, indicates that the C-shell exists. + */ +/* CSH: + * This symbol, if defined, contains the full pathname of csh. + */ +#$d_csh HAS_CSH /**/ +#ifdef HAS_CSH +#define CSH "$full_csh" /**/ +#endif + +/* DLSYM_NEEDS_UNDERSCORE: + * This symbol, if defined, indicates that we need to prepend an + * underscore to the symbol name before calling dlsym(). This only + * makes sense if you *have* dlsym, which we will presume is the + * case if you're using dl_dlopen.xs. + */ +#$d_dlsymun DLSYM_NEEDS_UNDERSCORE /**/ + +/* HAS_DRAND48_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the drand48() function. Otherwise, it is up + * to the program to supply one. A good guess is + * extern double drand48 _((void)); + */ +#$d_drand48proto HAS_DRAND48_PROTO /**/ + +/* HAS_ENDGRENT: + * This symbol, if defined, indicates that the getgrent routine is + * available for finalizing sequential access of the group database. + */ +#$d_endgrent HAS_ENDGRENT /**/ + +/* HAS_ENDHOSTENT: + * This symbol, if defined, indicates that the endhostent() routine is + * available to close whatever was being used for host queries. + */ +#$d_endhent HAS_ENDHOSTENT /**/ + +/* HAS_ENDNETENT: + * This symbol, if defined, indicates that the endnetent() routine is + * available to close whatever was being used for network queries. + */ +#$d_endnent HAS_ENDNETENT /**/ + +/* HAS_ENDPROTOENT: + * This symbol, if defined, indicates that the endprotoent() routine is + * available to close whatever was being used for protocol queries. + */ +#$d_endpent HAS_ENDPROTOENT /**/ + +/* HAS_ENDPWENT: + * This symbol, if defined, indicates that the getgrent routine is + * available for finalizing sequential access of the passwd database. + */ +#$d_endpwent HAS_ENDPWENT /**/ + +/* HAS_ENDSERVENT: + * This symbol, if defined, indicates that the endservent() routine is + * available to close whatever was being used for service queries. + */ +#$d_endsent HAS_ENDSERVENT /**/ + +/* HAS_ENDSPENT: + * This symbol, if defined, indicates that the endspent system call is + * available to finalize the scan of SysV shadow password entries. + */ +#$d_endspent HAS_ENDSPENT /**/ + +/* HAS_FD_SET: + * This symbol, when defined, indicates presence of the fd_set typedef + * in + */ +#$d_fd_set HAS_FD_SET /**/ + +/* HAS_STRUCT_FS_DATA: + * This symbol, if defined, indicates that the struct fs_data + * to do statfs() is supported. + */ +#$d_fs_data_s HAS_STRUCT_FS_DATA /**/ + +/* HAS_FSEEKO: + * This symbol, if defined, indicates that the fseeko routine is + * available to fseek beyond 32 bits (useful for ILP32 hosts). + */ +#$d_fseeko HAS_FSEEKO /**/ + +/* HAS_FSTATFS: + * This symbol, if defined, indicates that the fstatfs routine is + * available to stat filesystems by file descriptors. + */ +#$d_fstatfs HAS_FSTATFS /**/ +/* HAS_FTELLO: + * This symbol, if defined, indicates that the ftello routine is + * available to ftell beyond 32 bits (useful for ILP32 hosts). + */ +#$d_ftello HAS_FTELLO /**/ + /* Gconvert: * This preprocessor macro is defined to convert a floating point * number to a string without a trailing decimal point. This @@ -1123,386 +1379,73 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #define Gconvert(x,n,t,b) $d_Gconvert -/* HAS_GNULIBC: - * This symbol, if defined, indicates to the C program that - * the GNU C library is being used. - */ -#$d_gnulibc HAS_GNULIBC /**/ -/* HAS_ISASCII: - * This manifest constant lets the C program know that isascii - * is available. +/* HAS_GETGRENT: + * This symbol, if defined, indicates that the getgrent routine is + * available for sequential access of the group database. */ -#$d_isascii HAS_ISASCII /**/ +#$d_getgrent HAS_GETGRENT /**/ -/* HAS_LCHOWN: - * This symbol, if defined, indicates that the lchown routine is - * available to operate on a symbolic link (instead of following the - * link). +/* HAS_GETHOSTBYADDR: + * This symbol, if defined, indicates that the gethostbyaddr() routine is + * available to look up hosts by their IP addresses. */ -#$d_lchown HAS_LCHOWN /**/ +#$d_gethbyaddr HAS_GETHOSTBYADDR /**/ -/* HAS_OPEN3: - * This manifest constant lets the C program know that the three - * argument form of open(2) is available. +/* HAS_GETHOSTBYNAME: + * This symbol, if defined, indicates that the gethostbyname() routine is + * available to look up host names in some data base or other. */ -#$d_open3 HAS_OPEN3 /**/ +#$d_gethbyname HAS_GETHOSTBYNAME /**/ -/* HAS_SAFE_BCOPY: - * This symbol, if defined, indicates that the bcopy routine is available - * to copy potentially overlapping memory blocks. Otherwise you should - * probably use memmove() or memcpy(). If neither is defined, roll your - * own version. +/* HAS_GETHOSTENT: + * This symbol, if defined, indicates that the gethostent() routine is + * available to look up host names in some data base or another. */ -#$d_safebcpy HAS_SAFE_BCOPY /**/ +#$d_gethent HAS_GETHOSTENT /**/ -/* HAS_SAFE_MEMCPY: - * This symbol, if defined, indicates that the memcpy routine is available - * to copy potentially overlapping memory blocks. Otherwise you should - * probably use memmove() or memcpy(). If neither is defined, roll your - * own version. - */ -#$d_safemcpy HAS_SAFE_MEMCPY /**/ - -/* HAS_SANE_MEMCMP: - * This symbol, if defined, indicates that the memcmp routine is available - * and can be used to compare relative magnitudes of chars with their high - * bits set. If it is not defined, roll your own version. - */ -#$d_sanemcmp HAS_SANE_MEMCMP /**/ - -/* HAS_SIGACTION: - * This symbol, if defined, indicates that Vr4's sigaction() routine - * is available. - */ -#$d_sigaction HAS_SIGACTION /**/ - -/* Sigjmp_buf: - * This is the buffer type to be used with Sigsetjmp and Siglongjmp. - */ -/* Sigsetjmp: - * This macro is used in the same way as sigsetjmp(), but will invoke - * traditional setjmp() if sigsetjmp isn't available. - * See HAS_SIGSETJMP. - */ -/* Siglongjmp: - * This macro is used in the same way as siglongjmp(), but will invoke - * traditional longjmp() if siglongjmp isn't available. - * See HAS_SIGSETJMP. - */ -#$d_sigsetjmp HAS_SIGSETJMP /**/ -#ifdef HAS_SIGSETJMP -#define Sigjmp_buf sigjmp_buf -#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask)) -#define Siglongjmp(buf,retval) siglongjmp((buf),(retval)) -#else -#define Sigjmp_buf jmp_buf -#define Sigsetjmp(buf,save_mask) setjmp((buf)) -#define Siglongjmp(buf,retval) longjmp((buf),(retval)) -#endif - -/* USE_STDIO_PTR: - * This symbol is defined if the _ptr and _cnt fields (or similar) - * of the stdio FILE structure can be used to access the stdio buffer - * for a file handle. If this is defined, then the FILE_ptr(fp) - * and FILE_cnt(fp) macros will also be defined and should be used - * to access these fields. - */ -/* FILE_ptr: - * This macro is used to access the _ptr field (or equivalent) of the - * FILE structure pointed to by its argument. This macro will always be - * defined if USE_STDIO_PTR is defined. - */ -/* STDIO_PTR_LVALUE: - * This symbol is defined if the FILE_ptr macro can be used as an - * lvalue. - */ -/* FILE_cnt: - * This macro is used to access the _cnt field (or equivalent) of the - * FILE structure pointed to by its argument. This macro will always be - * defined if USE_STDIO_PTR is defined. - */ -/* STDIO_CNT_LVALUE: - * This symbol is defined if the FILE_cnt macro can be used as an - * lvalue. - */ -#$d_stdstdio USE_STDIO_PTR /**/ -#ifdef USE_STDIO_PTR -#define FILE_ptr(fp) $stdio_ptr -#$d_stdio_ptr_lval STDIO_PTR_LVALUE /**/ -#define FILE_cnt(fp) $stdio_cnt -#$d_stdio_cnt_lval STDIO_CNT_LVALUE /**/ -#endif - -/* USE_STDIO_BASE: - * This symbol is defined if the _base field (or similar) of the - * stdio FILE structure can be used to access the stdio buffer for - * a file handle. If this is defined, then the FILE_base(fp) macro - * will also be defined and should be used to access this field. - * Also, the FILE_bufsiz(fp) macro will be defined and should be used - * to determine the number of bytes in the buffer. USE_STDIO_BASE - * will never be defined unless USE_STDIO_PTR is. - */ -/* FILE_base: - * This macro is used to access the _base field (or equivalent) of the - * FILE structure pointed to by its argument. This macro will always be - * defined if USE_STDIO_BASE is defined. - */ -/* FILE_bufsiz: - * This macro is used to determine the number of bytes in the I/O - * buffer pointed to by _base field (or equivalent) of the FILE - * structure pointed to its argument. This macro will always be defined - * if USE_STDIO_BASE is defined. - */ -#$d_stdiobase USE_STDIO_BASE /**/ -#ifdef USE_STDIO_BASE -#define FILE_base(fp) $stdio_base -#define FILE_bufsiz(fp) $stdio_bufsiz -#endif - -/* HAS_VPRINTF: - * This symbol, if defined, indicates that the vprintf routine is available - * to printf with a pointer to an argument list. If unavailable, you - * may need to write your own, probably in terms of _doprnt(). - */ -/* USE_CHAR_VSPRINTF: - * This symbol is defined if this system has vsprintf() returning type - * (char*). The trend seems to be to declare it as "int vsprintf()". It - * is up to the package author to declare vsprintf correctly based on the - * symbol. - */ -#$d_vprintf HAS_VPRINTF /**/ -#$d_charvspr USE_CHAR_VSPRINTF /**/ - -/* DOUBLESIZE: - * This symbol contains the size of a double, so that the C preprocessor - * can make decisions based on it. - */ -#define DOUBLESIZE $doublesize /**/ - -/* I_TIME: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -/* I_SYS_TIME: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -/* I_SYS_TIME_KERNEL: - * This symbol, if defined, indicates to the C program that it should - * include with KERNEL defined. - */ -#$i_time I_TIME /**/ -#$i_systime I_SYS_TIME /**/ -#$i_systimek I_SYS_TIME_KERNEL /**/ - -/* INTSIZE: - * This symbol contains the value of sizeof(int) so that the C - * preprocessor can make decisions based on it. - */ -/* LONGSIZE: - * This symbol contains the value of sizeof(long) so that the C - * preprocessor can make decisions based on it. - */ -/* SHORTSIZE: - * This symbol contains the value of sizeof(short) so that the C - * preprocessor can make decisions based on it. - */ -#define INTSIZE $intsize /**/ -#define LONGSIZE $longsize /**/ -#define SHORTSIZE $shortsize /**/ - -/* VAL_O_NONBLOCK: - * This symbol is to be used during open() or fcntl(F_SETFL) to turn on - * non-blocking I/O for the file descriptor. Note that there is no way - * back, i.e. you cannot turn it blocking again this way. If you wish to - * alternatively switch between blocking and non-blocking, use the - * ioctl(FIOSNBIO) call instead, but that is not supported by all devices. - */ -/* VAL_EAGAIN: - * This symbol holds the errno error code set by read() when no data was - * present on the non-blocking file descriptor. - */ -/* RD_NODATA: - * This symbol holds the return code from read() when no data is present - * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is - * not defined, then you can't distinguish between no data and EOF by - * issuing a read(). You'll have to find another way to tell for sure! - */ -/* EOF_NONBLOCK: - * This symbol, if defined, indicates to the C program that a read() on - * a non-blocking file descriptor will return 0 on EOF, and not the value - * held in RD_NODATA (-1 usually, in that case!). - */ -#define VAL_O_NONBLOCK $o_nonblock -#define VAL_EAGAIN $eagain -#define RD_NODATA $rd_nodata -#$d_eofnblk EOF_NONBLOCK - -/* PTRSIZE: - * This symbol contains the size of a pointer, so that the C preprocessor - * can make decisions based on it. It will be sizeof(void *) if - * the compiler supports (void *); otherwise it will be - * sizeof(char *). - */ -#define PTRSIZE $ptrsize /**/ - -/* Drand01: - * This macro is to be used to generate uniformly distributed - * random numbers over the range [0., 1.[. You may have to supply - * an 'extern double drand48();' in your program since SunOS 4.1.3 - * doesn't provide you with anything relevant in it's headers. - * See HAS_DRAND48_PROTO. - */ -/* Rand_seed_t: - * This symbol defines the type of the argument of the - * random seed function. - */ -/* seedDrand01: - * This symbol defines the macro to be used in seeding the - * random number generator (see Drand01). - */ -/* RANDBITS: - * This symbol indicates how many bits are produced by the - * function used to generate normalized random numbers. - * Values include 15, 16, 31, and 48. - */ -#define Drand01() $drand01 /**/ -#define Rand_seed_t $randseedtype /**/ -#define seedDrand01(x) $seedfunc((Rand_seed_t)x) /**/ -#define RANDBITS $randbits /**/ - -/* SSize_t: - * This symbol holds the type used by functions that return - * a count of bytes or an error condition. It must be a signed type. - * It is usually ssize_t, but may be long or int, etc. - * It may be necessary to include or - * to get any typedef'ed information. - * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t). - */ -#define SSize_t $ssizetype /* signed count of bytes */ - -/* EBCDIC: - * This symbol, if defined, indicates that this system uses - * EBCDIC encoding. - */ -#$ebcdic EBCDIC /**/ - -/* OSNAME: - * This symbol contains the name of the operating system, as determined - * by Configure. You shouldn't rely on it too much; the specific - * feature tests from Configure are generally more reliable. - */ -#define OSNAME "$osname" /**/ - -/* CAT2: - * This macro catenates 2 tokens together. - */ -/* STRINGIFY: - * This macro surrounds its token with double quotes. - */ -#if $cpp_stuff == 1 -#define CAT2(a,b)a/**/b -#define STRINGIFY(a)"a" - /* If you can get stringification with catify, tell me how! */ -#endif -#if $cpp_stuff == 42 -#define CAT2(a,b)a ## b -#define StGiFy(a)# a -#define STRINGIFY(a)StGiFy(a) -#endif -#if $cpp_stuff != 1 && $cpp_stuff != 42 -#include "Bletch: How does this C preprocessor catenate tokens?" -#endif - -/* CPPSTDIN: - * This symbol contains the first part of the string which will invoke - * the C preprocessor on the standard input and produce to standard - * output. Typical value of "cc -E" or "/lib/cpp", but it can also - * call a wrapper. See CPPRUN. - */ -/* CPPMINUS: - * This symbol contains the second part of the string which will invoke - * the C preprocessor on the standard input and produce to standard - * output. This symbol will have the value "-" if CPPSTDIN needs a minus - * to specify standard input, otherwise the value is "". - */ -#define CPPSTDIN "$cppstdin" -#define CPPMINUS "$cppminus" - -/* HAS_ACCESS: - * This manifest constant lets the C program know that the access() - * system call is available to check for accessibility using real UID/GID. - * (always present on UNIX.) - */ -#$d_access HAS_ACCESS /**/ - -/* CSH: - * This symbol, if defined, contains the full pathname of csh. - */ -#$d_csh HAS_CSH /**/ -#ifdef HAS_CSH -#define CSH "$full_csh" /**/ -#endif - -/* HAS_ENDGRENT: - * This symbol, if defined, indicates that the getgrent routine is - * available for finalizing sequential access of the group database. - */ -#$d_endgrent HAS_ENDGRENT /**/ - -/* HAS_ENDHOSTENT: - * This symbol, if defined, indicates that the endhostent() routine is - * available to close whatever was being used for host queries. - */ -#$d_endhent HAS_ENDHOSTENT /**/ - -/* HAS_ENDNETENT: - * This symbol, if defined, indicates that the endnetent() routine is - * available to close whatever was being used for network queries. - */ -#$d_endnent HAS_ENDNETENT /**/ - -/* HAS_ENDPROTOENT: - * This symbol, if defined, indicates that the endprotoent() routine is - * available to close whatever was being used for protocol queries. - */ -#$d_endpent HAS_ENDPROTOENT /**/ - -/* HAS_ENDPWENT: - * This symbol, if defined, indicates that the getgrent routine is - * available for finalizing sequential access of the passwd database. +/* HAS_GETHOSTNAME: + * This symbol, if defined, indicates that the C program may use the + * gethostname() routine to derive the host name. See also HAS_UNAME + * and PHOSTNAME. */ -#$d_endpwent HAS_ENDPWENT /**/ - -/* HAS_ENDSERVENT: - * This symbol, if defined, indicates that the endservent() routine is - * available to close whatever was being used for service queries. +/* HAS_UNAME: + * This symbol, if defined, indicates that the C program may use the + * uname() routine to derive the host name. See also HAS_GETHOSTNAME + * and PHOSTNAME. */ -#$d_endsent HAS_ENDSERVENT /**/ - -/* HAS_GETGRENT: - * This symbol, if defined, indicates that the getgrent routine is - * available for sequential access of the group database. +/* PHOSTNAME: + * This symbol, if defined, indicates the command to feed to the + * popen() routine to derive the host name. See also HAS_GETHOSTNAME + * and HAS_UNAME. Note that the command uses a fully qualified path, + * so that it is safe even if used by a process with super-user + * privileges. */ -#$d_getgrent HAS_GETGRENT /**/ +#$d_gethname HAS_GETHOSTNAME /**/ +#$d_uname HAS_UNAME /**/ +#$d_phostname HAS_PHOSTNAME +#ifdef HAS_PHOSTNAME +#define PHOSTNAME "$aphostname" /* How to get the host name */ +#endif -/* HAS_GETHOSTBYADDR: - * This symbol, if defined, indicates that the gethostbyaddr() routine is - * available to look up hosts by their IP addresses. +/* HAS_GETHOST_PROTOS: + * This symbol, if defined, indicates that includes + * prototypes for gethostent(), gethostbyname(), and + * gethostbyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. */ -#$d_gethbyaddr HAS_GETHOSTBYADDR /**/ +#$d_gethostprotos HAS_GETHOST_PROTOS /**/ -/* HAS_GETHOSTBYNAME: - * This symbol, if defined, indicates that the gethostbyname() routine is - * available to look up host names in some data base or other. +/* HAS_GETMNT: + * This symbol, if defined, indicates that the getmnt routine is + * available to get filesystem mount info by filename. */ -#$d_gethbyname HAS_GETHOSTBYNAME /**/ +#$d_getmnt HAS_GETMNT /**/ -/* HAS_GETHOSTENT: - * This symbol, if defined, indicates that the gethostent() routine is - * available to look up host names in some data base or another. +/* HAS_GETMNTENT: + * This symbol, if defined, indicates that the getmntent routine is + * available to iterate through mounted file systems to get their info. */ -#$d_gethent HAS_GETHOSTENT /**/ +#$d_getmntent HAS_GETMNTENT /**/ /* HAS_GETNETBYADDR: * This symbol, if defined, indicates that the getnetbyaddr() routine is @@ -1522,6 +1465,14 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$d_getnent HAS_GETNETENT /**/ +/* HAS_GETNET_PROTOS: + * This symbol, if defined, indicates that includes + * prototypes for getnetent(), getnetbyname(), and + * getnetbyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. + */ +#$d_getnetprotos HAS_GETNET_PROTOS /**/ + /* HAS_GETPROTOENT: * This symbol, if defined, indicates that the getprotoent() routine is * available to look up protocols in some data base or another. @@ -1539,6 +1490,14 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #$d_getpbyname HAS_GETPROTOBYNAME /**/ #$d_getpbynumber HAS_GETPROTOBYNUMBER /**/ +/* HAS_GETPROTO_PROTOS: + * This symbol, if defined, indicates that includes + * prototypes for getprotoent(), getprotobyname(), and + * getprotobyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. + */ +#$d_getprotoprotos HAS_GETPROTO_PROTOS /**/ + /* HAS_GETPWENT: * This symbol, if defined, indicates that the getpwent routine is * available for sequential access of the passwd database. @@ -1552,6 +1511,26 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$d_getsent HAS_GETSERVENT /**/ +/* HAS_GETSERV_PROTOS: + * This symbol, if defined, indicates that includes + * prototypes for getservent(), getservbyname(), and + * getservbyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. + */ +#$d_getservprotos HAS_GETSERV_PROTOS /**/ + +/* HAS_GETSPENT: + * This symbol, if defined, indicates that the getspent system call is + * available to retrieve SysV shadow password entries sequentially. + */ +#$d_getspent HAS_GETSPENT /**/ + +/* HAS_GETSPNAM: + * This symbol, if defined, indicates that the getspnam system call is + * available to retrieve SysV shadow password entries by name. + */ +#$d_getspnam HAS_GETSPNAM /**/ + /* HAS_GETSERVBYNAME: * This symbol, if defined, indicates that the getservbyname() * routine is available to look up services by their name. @@ -1563,6 +1542,20 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #$d_getsbyname HAS_GETSERVBYNAME /**/ #$d_getsbyport HAS_GETSERVBYPORT /**/ +/* HAS_GNULIBC: + * This symbol, if defined, indicates to the C program that + * the GNU C library is being used. + */ +#$d_gnulibc HAS_GNULIBC /**/ +#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE) +# define _GNU_SOURCE +#endif +/* HAS_HASMNTOPT: + * This symbol, if defined, indicates that the hasmntopt routine is + * available to query the mount options of file systems. + */ +#$d_hasmntopt HAS_HASMNTOPT /**/ + /* HAS_HTONL: * This symbol, if defined, indicates that the htonl() routine (and * friends htons() ntohl() ntohs()) are available to do network @@ -1588,6 +1581,27 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #$d_htonl HAS_NTOHL /**/ #$d_htonl HAS_NTOHS /**/ +/* HAS_ISASCII: + * This manifest constant lets the C program know that isascii + * is available. + */ +#$d_isascii HAS_ISASCII /**/ + +/* HAS_LCHOWN: + * This symbol, if defined, indicates that the lchown routine is + * available to operate on a symbolic link (instead of following the + * link). + */ +#$d_lchown HAS_LCHOWN /**/ + +/* HAS_LDBL_DIG: + * This symbol, if defined, indicates that this system's + * or defines the symbol LDBL_DIG, which is the number + * of significant digits in a long double precision number. Unlike + * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined. + */ +#$d_ldbl_dig HAS_LDBL_DIG /* */ + /* HAS_LONG_DOUBLE: * This symbol will be defined if the C compiler supports long * doubles. @@ -1615,12 +1629,76 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #define LONGLONGSIZE $longlongsize /**/ #endif +/* HAS_MEMCHR: + * This symbol, if defined, indicates that the memchr routine is available + * to locate characters within a C string. + */ +#$d_memchr HAS_MEMCHR /**/ + /* HAS_MSG: * This symbol, if defined, indicates that the entire msg*(2) library is * supported (IPC mechanism based on message queues). */ #$d_msg HAS_MSG /**/ +/* HAS_OPEN3: + * This manifest constant lets the C program know that the three + * argument form of open(2) is available. + */ +#$d_open3 HAS_OPEN3 /**/ + +/* OLD_PTHREAD_CREATE_JOINABLE: + * This symbol, if defined, indicates how to create pthread + * in joinable (aka undetached) state. NOTE: not defined + * if pthread.h already has defined PTHREAD_CREATE_JOINABLE + * (the new version of the constant). + * If defined, known values are PTHREAD_CREATE_UNDETACHED + * and __UNDETACHED. + */ +#$d_old_pthread_create_joinable OLD_PTHREAD_CREATE_JOINABLE $old_pthread_create_joinable /**/ + +/* HAS_PTHREAD_YIELD: + * This symbol, if defined, indicates that the pthread_yield + * routine is available to yield the execution of the current + * thread. sched_yield is preferable to pthread_yield. + */ +/* SCHED_YIELD: + * This symbol defines the way to yield the execution of + * the current thread. Known ways are sched_yield, + * pthread_yield, and pthread_yield with NULL. + */ +/* HAS_SCHED_YIELD: + * This symbol, if defined, indicates that the sched_yield + * routine is available to yield the execution of the current + * thread. sched_yield is preferable to pthread_yield. + */ +#$d_pthread_yield HAS_PTHREAD_YIELD /**/ +#define SCHED_YIELD $sched_yield /**/ +#$d_sched_yield HAS_SCHED_YIELD /**/ + +/* HAS_SAFE_BCOPY: + * This symbol, if defined, indicates that the bcopy routine is available + * to copy potentially overlapping memory blocks. Otherwise you should + * probably use memmove() or memcpy(). If neither is defined, roll your + * own version. + */ +#$d_safebcpy HAS_SAFE_BCOPY /**/ + +/* HAS_SAFE_MEMCPY: + * This symbol, if defined, indicates that the memcpy routine is available + * to copy potentially overlapping memory blocks. Otherwise you should + * probably use memmove() or memcpy(). If neither is defined, roll your + * own version. + */ +#$d_safemcpy HAS_SAFE_MEMCPY /**/ + +/* HAS_SANE_MEMCMP: + * This symbol, if defined, indicates that the memcmp routine is available + * and can be used to compare relative magnitudes of chars with their high + * bits set. If it is not defined, roll your own version. + */ +#$d_sanemcmp HAS_SANE_MEMCMP /**/ + /* HAS_SEM: * This symbol, if defined, indicates that the entire sem*(2) library is * supported. @@ -1668,37 +1746,212 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- * This symbol, if defined, indicates that the setservent() routine is * available. */ -#$d_setsent HAS_SETSERVENT /**/ - -/* HAS_SETVBUF: - * This symbol, if defined, indicates that the setvbuf routine is - * available to change buffering on an open stdio stream. - * to a line-buffered mode. +#$d_setsent HAS_SETSERVENT /**/ + +/* HAS_SETSPENT: + * This symbol, if defined, indicates that the setspent system call is + * available to initialize the scan of SysV shadow password entries. + */ +#$d_setspent HAS_SETSPENT /**/ + +/* HAS_SETVBUF: + * This symbol, if defined, indicates that the setvbuf routine is + * available to change buffering on an open stdio stream. + * to a line-buffered mode. + */ +#$d_setvbuf HAS_SETVBUF /**/ + +/* USE_SFIO: + * This symbol, if defined, indicates that sfio should + * be used. + */ +#$d_sfio USE_SFIO /**/ + +/* HAS_SHM: + * This symbol, if defined, indicates that the entire shm*(2) library is + * supported. + */ +#$d_shm HAS_SHM /**/ + +/* HAS_SIGACTION: + * This symbol, if defined, indicates that Vr4's sigaction() routine + * is available. + */ +#$d_sigaction HAS_SIGACTION /**/ + +/* HAS_SIGSETJMP: + * This variable indicates to the C program that the sigsetjmp() + * routine is available to save the calling process's registers + * and stack environment for later use by siglongjmp(), and + * to optionally save the process's signal mask. See + * Sigjmp_buf, Sigsetjmp, and Siglongjmp. + */ +/* Sigjmp_buf: + * This is the buffer type to be used with Sigsetjmp and Siglongjmp. + */ +/* Sigsetjmp: + * This macro is used in the same way as sigsetjmp(), but will invoke + * traditional setjmp() if sigsetjmp isn't available. + * See HAS_SIGSETJMP. + */ +/* Siglongjmp: + * This macro is used in the same way as siglongjmp(), but will invoke + * traditional longjmp() if siglongjmp isn't available. + * See HAS_SIGSETJMP. + */ +#$d_sigsetjmp HAS_SIGSETJMP /**/ +#ifdef HAS_SIGSETJMP +#define Sigjmp_buf sigjmp_buf +#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask)) +#define Siglongjmp(buf,retval) siglongjmp((buf),(retval)) +#else +#define Sigjmp_buf jmp_buf +#define Sigsetjmp(buf,save_mask) setjmp((buf)) +#define Siglongjmp(buf,retval) longjmp((buf),(retval)) +#endif + +/* HAS_SOCKET: + * This symbol, if defined, indicates that the BSD socket interface is + * supported. + */ +/* HAS_SOCKETPAIR: + * This symbol, if defined, indicates that the BSD socketpair() call is + * supported. + */ +/* HAS_MSG_CTRUNC: + * This symbol, if defined, indicates that the MSG_CTRUNC is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_MSG_DONTROUTE: + * This symbol, if defined, indicates that the MSG_DONTROUTE is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_MSG_OOB: + * This symbol, if defined, indicates that the MSG_OOB is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_MSG_PEEK: + * This symbol, if defined, indicates that the MSG_PEEK is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_MSG_PROXY: + * This symbol, if defined, indicates that the MSG_PROXY is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_SCM_RIGHTS: + * This symbol, if defined, indicates that the SCM_RIGHTS is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +#$d_socket HAS_SOCKET /**/ +#$d_sockpair HAS_SOCKETPAIR /**/ +#$d_msg_ctrunc HAS_MSG_CTRUNC /**/ +#$d_msg_dontroute HAS_MSG_DONTROUTE /**/ +#$d_msg_oob HAS_MSG_OOB /**/ +#$d_msg_peek HAS_MSG_PEEK /**/ +#$d_msg_proxy HAS_MSG_PROXY /**/ +#$d_scm_rights HAS_SCM_RIGHTS /**/ + +/* HAS_SQRTL: + * This symbol, if defined, indicates that the sqrtl routine is + * available to do long double square roots. + */ +#$d_sqrtl HAS_SQRTL /**/ + +/* USE_STAT_BLOCKS: + * This symbol is defined if this system has a stat structure declaring + * st_blksize and st_blocks. + */ +#ifndef USE_STAT_BLOCKS +#$d_statblks USE_STAT_BLOCKS /**/ +#endif + +/* HAS_STRUCT_STATFS_F_FLAGS: + * This symbol, if defined, indicates that the struct statfs + * does have the f_flags member containing the mount flags of + * the filesystem containing the file. + * This kind of struct statfs is coming from (BSD 4.3), + * not from (SYSV). Older BSDs (like Ultrix) do not + * have statfs() and struct statfs, they have ustat() and getmnt() + * with struct ustat and struct fs_data. + */ +#$d_statfs_f_flags HAS_STRUCT_STATFS_F_FLAGS /**/ + +/* HAS_STRUCT_STATFS: + * This symbol, if defined, indicates that the struct statfs + * to do statfs() is supported. + */ +#$d_statfs_s HAS_STRUCT_STATFS /**/ + +/* HAS_FSTATVFS: + * This symbol, if defined, indicates that the fstatvfs routine is + * available to stat filesystems by file descriptors. + */ +#$d_fstatvfs HAS_FSTATVFS /**/ + +/* USE_STDIO_PTR: + * This symbol is defined if the _ptr and _cnt fields (or similar) + * of the stdio FILE structure can be used to access the stdio buffer + * for a file handle. If this is defined, then the FILE_ptr(fp) + * and FILE_cnt(fp) macros will also be defined and should be used + * to access these fields. + */ +/* FILE_ptr: + * This macro is used to access the _ptr field (or equivalent) of the + * FILE structure pointed to by its argument. This macro will always be + * defined if USE_STDIO_PTR is defined. + */ +/* STDIO_PTR_LVALUE: + * This symbol is defined if the FILE_ptr macro can be used as an + * lvalue. + */ +/* FILE_cnt: + * This macro is used to access the _cnt field (or equivalent) of the + * FILE structure pointed to by its argument. This macro will always be + * defined if USE_STDIO_PTR is defined. */ -#$d_setvbuf HAS_SETVBUF /**/ - -/* HAS_SHM: - * This symbol, if defined, indicates that the entire shm*(2) library is - * supported. +/* STDIO_CNT_LVALUE: + * This symbol is defined if the FILE_cnt macro can be used as an + * lvalue. */ -#$d_shm HAS_SHM /**/ +#$d_stdstdio USE_STDIO_PTR /**/ +#ifdef USE_STDIO_PTR +#define FILE_ptr(fp) $stdio_ptr +#$d_stdio_ptr_lval STDIO_PTR_LVALUE /**/ +#define FILE_cnt(fp) $stdio_cnt +#$d_stdio_cnt_lval STDIO_CNT_LVALUE /**/ +#endif -/* HAS_SOCKET: - * This symbol, if defined, indicates that the BSD socket interface is - * supported. +/* USE_STDIO_BASE: + * This symbol is defined if the _base field (or similar) of the + * stdio FILE structure can be used to access the stdio buffer for + * a file handle. If this is defined, then the FILE_base(fp) macro + * will also be defined and should be used to access this field. + * Also, the FILE_bufsiz(fp) macro will be defined and should be used + * to determine the number of bytes in the buffer. USE_STDIO_BASE + * will never be defined unless USE_STDIO_PTR is. */ -/* HAS_SOCKETPAIR: - * This symbol, if defined, indicates that the BSD socketpair() call is - * supported. +/* FILE_base: + * This macro is used to access the _base field (or equivalent) of the + * FILE structure pointed to by its argument. This macro will always be + * defined if USE_STDIO_BASE is defined. */ -#$d_socket HAS_SOCKET /**/ -#$d_sockpair HAS_SOCKETPAIR /**/ - -/* USE_STAT_BLOCKS: - * This symbol is defined if this system has a stat structure declaring - * st_blksize and st_blocks. +/* FILE_bufsiz: + * This macro is used to determine the number of bytes in the I/O + * buffer pointed to by _base field (or equivalent) of the FILE + * structure pointed to its argument. This macro will always be defined + * if USE_STDIO_BASE is defined. */ -#$d_statblks USE_STAT_BLOCKS /**/ +#$d_stdiobase USE_STDIO_BASE /**/ +#ifdef USE_STDIO_BASE +#define FILE_base(fp) $stdio_base +#define FILE_bufsiz(fp) $stdio_bufsiz +#endif /* HAS_STRERROR: * This symbol, if defined, indicates that the strerror routine is @@ -1719,6 +1972,52 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #$d_syserrlst HAS_SYS_ERRLIST /**/ #define Strerror(e) $d_strerrm +/* HAS_STRTOLD: + * This symbol, if defined, indicates that the strtold routine is + * available to convert strings to long doubles. + */ +#$d_strtold HAS_STRTOLD /**/ + +/* HAS_STRTOLL: + * This symbol, if defined, indicates that the strtoll routine is + * available to convert strings to long longs. + */ +#$d_strtoll HAS_STRTOLL /**/ + +/* HAS_STRTOULL: + * This symbol, if defined, indicates that the strtoull routine is + * available to convert strings to unsigned long longs. + */ +#$d_strtoull HAS_STRTOULL /**/ + +/* HAS_STRTOUQ: + * This symbol, if defined, indicates that the strtouq routine is + * available to convert strings to unsigned long longs (quads). + */ +#$d_strtouq HAS_STRTOUQ /**/ + +/* HAS_TELLDIR_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the telldir() function. Otherwise, it is up + * to the program to supply one. A good guess is + * extern long telldir _((DIR*)); + */ +#$d_telldirproto HAS_TELLDIR_PROTO /**/ + +/* Time_t: + * This symbol holds the type returned by time(). It can be long, + * or time_t on BSD sites (in which case should be + * included). + */ +#define Time_t $timetype /* Time type */ + +/* HAS_TIMES: + * This symbol, if defined, indicates that the times() routine exists. + * Note that this became obsolete on some systems (SUNOS), which now + * use getrusage(). It may be necessary to include . + */ +#$d_times HAS_TIMES /**/ + /* HAS_UNION_SEMUN: * This symbol, if defined, indicates that the union semun is * defined by including . If not, the user code @@ -1741,6 +2040,17 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #$d_semctl_semun USE_SEMCTL_SEMUN /**/ #$d_semctl_semid_ds USE_SEMCTL_SEMID_DS /**/ +/* HAS_USTAT: + * This symbol, if defined, indicates that the ustat system call is + * available to query file system statistics by dev_t. + */ +#$d_ustat HAS_USTAT /**/ + +/* HAS_VFORK: + * This symbol, if defined, indicates that vfork() exists. + */ +#$d_vfork HAS_VFORK /**/ + /* Signal_t: * This symbol's value is either "void" or "int", corresponding to the * appropriate return type of a signal handler. Thus, you can declare @@ -1749,6 +2059,78 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #define Signal_t $signal_t /* Signal handler's return type */ +/* HAS_VPRINTF: + * This symbol, if defined, indicates that the vprintf routine is available + * to printf with a pointer to an argument list. If unavailable, you + * may need to write your own, probably in terms of _doprnt(). + */ +/* USE_CHAR_VSPRINTF: + * This symbol is defined if this system has vsprintf() returning type + * (char*). The trend seems to be to declare it as "int vsprintf()". It + * is up to the package author to declare vsprintf correctly based on the + * symbol. + */ +#$d_vprintf HAS_VPRINTF /**/ +#$d_charvspr USE_CHAR_VSPRINTF /**/ + +/* USE_DYNAMIC_LOADING: + * This symbol, if defined, indicates that dynamic loading of + * some sort is available. + */ +#$usedl USE_DYNAMIC_LOADING /**/ + +/* DOUBLESIZE: + * This symbol contains the size of a double, so that the C preprocessor + * can make decisions based on it. + */ +#define DOUBLESIZE $doublesize /**/ + +/* EBCDIC: + * This symbol, if defined, indicates that this system uses + * EBCDIC encoding. + */ +#$ebcdic EBCDIC /**/ + +/* FFLUSH_NULL: + * This symbol, if defined, tells that fflush(NULL) does flush + * all pending stdio output. + */ +/* FFLUSH_ALL: + * This symbol, if defined, tells that to flush + * all pending stdio output one must loop through all + * the stdio file handles stored in an array and fflush them. + * Note that if fflushNULL is defined, fflushall will not + * even be probed for and will be left undefined. + */ +#$fflushNULL FFLUSH_NULL /**/ +#$fflushall FFLUSH_ALL /**/ + +/* Fpos_t: + * This symbol holds the type used to declare file positions in libc. + * It can be fpos_t, long, uint, etc... It may be necessary to include + * to get any typedef'ed information. + */ +#define Fpos_t $fpostype /* File position type */ + +/* Gid_t_f: + * This symbol defines the format string used for printing a Gid_t. + */ +#define Gid_t_f $gidformat /**/ + +/* Gid_t_size: + * This symbol holds the size of a Gid_t in bytes. + */ +#define Gid_t_size $gidsize /* GID size */ + +/* Gid_t: + * This symbol holds the return type of getgid() and the type of + * argument to setrgid() and related functions. Typically, + * it is the type of group ids in the kernel. It can be int, ushort, + * uid_t, etc... It may be necessary to include to get + * any typedef'ed information. + */ +#define Gid_t $gidtype /* Type for getgid(), etc... */ + /* Groups_t: * This symbol holds the type used for the second argument to * getgroups() and setgropus(). Usually, this is the same as @@ -1762,6 +2144,19 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #define Groups_t $groupstype /* Type for 2nd arg to [sg]etgroups() */ #endif +/* DB_Prefix_t: + * This symbol contains the type of the prefix structure element + * in the header file. In older versions of DB, it was + * int, while in newer ones it is u_int32_t. + */ +/* DB_Hash_t: + * This symbol contains the type of the prefix structure element + * in the header file. In older versions of DB, it was + * int, while in newer ones it is size_t. + */ +#define DB_Hash_t $db_hashtype /**/ +#define DB_Prefix_t $db_prefixtype /**/ + /* I_GRP: * This symbol, if defined, indicates to the C program that it should * include . @@ -1773,12 +2168,48 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #$i_grp I_GRP /**/ #$d_grpasswd GRPASSWD /**/ +/* I_INTTYPES: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#$i_inttypes I_INTTYPES /**/ + +/* I_MACH_CTHREADS: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#$i_machcthr I_MACH_CTHREADS /**/ + +/* I_MNTENT: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#$i_mntent I_MNTENT /**/ + /* I_NETDB: * This symbol, if defined, indicates that exists and * should be included. */ #$i_netdb I_NETDB /**/ +/* I_NETINET_TCP: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#$i_netinettcp I_NETINET_TCP /**/ + +/* I_POLL: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#$i_poll I_POLL /**/ + +/* I_PTHREAD: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#$i_pthread I_PTHREAD /**/ + /* I_PWD: * This symbol, if defined, indicates to the C program that it should * include . @@ -1803,27 +2234,134 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- * This symbol, if defined, indicates to the C program that struct passwd * contains pw_expire. */ -/* PWCOMMENT: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_comment. +/* PWCOMMENT: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_comment. + */ +/* PWGECOS: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_gecos. + */ +/* PWPASSWD: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_passwd. + */ +#$i_pwd I_PWD /**/ +#$d_pwquota PWQUOTA /**/ +#$d_pwage PWAGE /**/ +#$d_pwchange PWCHANGE /**/ +#$d_pwclass PWCLASS /**/ +#$d_pwexpire PWEXPIRE /**/ +#$d_pwcomment PWCOMMENT /**/ +#$d_pwgecos PWGECOS /**/ +#$d_pwpasswd PWPASSWD /**/ + +/* I_SHADOW: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#$i_shadow I_SHADOW /**/ + +/* I_SOCKS: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#$i_socks I_SOCKS /**/ + +/* I_SYS_MOUNT: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#$i_sysmount I_SYS_MOUNT /**/ + +/* I_SYS_STATFS: + * This symbol, if defined, indicates that exists. + */ +#$i_sysstatfs I_SYS_STATFS /**/ + +/* I_SYS_STATVFS: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#$i_sysstatvfs I_SYS_STATVFS /**/ + +/* I_SYSUIO: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#$i_sysuio I_SYSUIO /**/ + +/* I_SYS_VFS: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#$i_sysvfs I_SYS_VFS /**/ + +/* I_TIME: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/* I_SYS_TIME: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/* I_SYS_TIME_KERNEL: + * This symbol, if defined, indicates to the C program that it should + * include with KERNEL defined. + */ +#$i_time I_TIME /**/ +#$i_systime I_SYS_TIME /**/ +#$i_systimek I_SYS_TIME_KERNEL /**/ + +/* I_USTAT: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#$i_ustat I_USTAT /**/ + +/* PERL_INC_VERSION_LIST: + * This variable specifies the list of subdirectories in over + * which perl.c:incpush() and lib/lib.pm will automatically + * search when adding directories to @INC, in a format suitable + * for a C initialization string. See the inc_version_list entry + * in Porting/Glossary for more details. + */ +#define PERL_INC_VERSION_LIST $inc_version_list_init /**/ + +/* HAS_OFF64_T: + * This symbol will be defined if the C compiler supports off64_t. + */ +/* HAS_FPOS64_T: + * This symbol will be defined if the C compiler supports fpos64_t. + */ +#$d_off64_t HAS_OFF64_T /**/ +#$d_fpos64_t HAS_FPOS64_T /**/ + +/* PERL_PRIfldbl: + * This symbol, if defined, contains the string used by stdio to + * format long doubles (format 'f') for output. + */ +/* PERL_PRIgldbl: + * This symbol, if defined, contains the string used by stdio to + * format long doubles (format 'g') for output. */ -/* PWGECOS: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_gecos. +#$d_PRIfldbl PERL_PRIfldbl $sPRIfldbl /**/ +#$d_PRIgldbl PERL_PRIgldbl $sPRIgldbl /**/ + +/* Off_t: + * This symbol holds the type used to declare offsets in the kernel. + * It can be int, long, off_t, etc... It may be necessary to include + * to get any typedef'ed information. */ -/* PWPASSWD: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_passwd. +/* LSEEKSIZE: + * This symbol holds the number of bytes used by the Off_t. */ -#$i_pwd I_PWD /**/ -#$d_pwquota PWQUOTA /**/ -#$d_pwage PWAGE /**/ -#$d_pwchange PWCHANGE /**/ -#$d_pwclass PWCLASS /**/ -#$d_pwexpire PWEXPIRE /**/ -#$d_pwcomment PWCOMMENT /**/ -#$d_pwgecos PWGECOS /**/ -#$d_pwpasswd PWPASSWD /**/ +/* Off_t_size: + * This symbol holds the number of bytes used by the Off_t. + */ +#define Off_t $lseektype /* type */ +#define LSEEKSIZE $lseeksize /* size */ +#define Off_t_size $lseeksize /* size */ /* Free_t: * This variable contains the return type of free(). It is usually @@ -1840,234 +2378,183 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$d_mymalloc MYMALLOC /**/ -/* SIG_NAME: - * This symbol contains a list of signal names in order of - * signal number. This is intended - * to be used as a static array initialization, like this: - * char *sig_name[] = { SIG_NAME }; - * The signals in the list are separated with commas, and each signal - * is surrounded by double quotes. There is no leading SIG in the signal - * name, i.e. SIGQUIT is known as "QUIT". - * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn, - * etc., where nn is the actual signal number (e.g. NUM37). - * The signal number for sig_name[i] is stored in sig_num[i]. - * The last element is 0 to terminate the list with a NULL. This - * corresponds to the 0 at the end of the sig_num list. - */ -/* SIG_NUM: - * This symbol contains a list of signal numbers, in the same order as the - * SIG_NAME list. It is suitable for static array initialization, as in: - * int sig_num[] = { SIG_NUM }; - * The signals in the list are separated with commas, and the indices - * within that list and the SIG_NAME list match, so it's easy to compute - * the signal name from a number or vice versa at the price of a small - * dynamic linear lookup. - * Duplicates are allowed, but are moved to the end of the list. - * The signal number corresponding to sig_name[i] is sig_number[i]. - * if (i < NSIG) then sig_number[i] == i. - * The last element is 0, corresponding to the 0 at the end of - * the sig_name list. +/* Mode_t: + * This symbol holds the type used to declare file modes + * for systems calls. It is usually mode_t, but may be + * int or unsigned short. It may be necessary to include + * to get any typedef'ed information. */ -#define SIG_NAME $sig_name_init /**/ -#define SIG_NUM $sig_num_init /**/ +#define Mode_t $modetype /* file mode parameter for system calls */ -/* VOIDFLAGS: - * This symbol indicates how much support of the void type is given by this - * compiler. What various bits mean: - * - * 1 = supports declaration of void - * 2 = supports arrays of pointers to functions returning void - * 4 = supports comparisons between pointers to void functions and - * addresses of void functions - * 8 = suports declaration of generic void pointers - * - * The package designer should define VOIDUSED to indicate the requirements - * of the package. This can be done either by #defining VOIDUSED before - * including config.h, or by defining defvoidused in Myinit.U. If the - * latter approach is taken, only those flags will be tested. If the - * level of void support necessary is not present, defines void to int. +/* VAL_O_NONBLOCK: + * This symbol is to be used during open() or fcntl(F_SETFL) to turn on + * non-blocking I/O for the file descriptor. Note that there is no way + * back, i.e. you cannot turn it blocking again this way. If you wish to + * alternatively switch between blocking and non-blocking, use the + * ioctl(FIOSNBIO) call instead, but that is not supported by all devices. */ -#ifndef VOIDUSED -#define VOIDUSED $defvoidused -#endif -#define VOIDFLAGS $voidflags -#if (VOIDFLAGS & VOIDUSED) != VOIDUSED -#define void int /* is void to be avoided? */ -#define M_VOID /* Xenix strikes again */ -#endif - -/* ARCHLIB: - * This variable, if defined, holds the name of the directory in - * which the user wants to put architecture-dependent public - * library files for $package. It is most often a local directory - * such as /usr/local/lib. Programs using this variable must be - * prepared to deal with filename expansion. If ARCHLIB is the - * same as PRIVLIB, it is not defined, since presumably the - * program already searches PRIVLIB. +/* VAL_EAGAIN: + * This symbol holds the errno error code set by read() when no data was + * present on the non-blocking file descriptor. */ -/* ARCHLIB_EXP: - * This symbol contains the ~name expanded version of ARCHLIB, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. +/* RD_NODATA: + * This symbol holds the return code from read() when no data is present + * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is + * not defined, then you can't distinguish between no data and EOF by + * issuing a read(). You'll have to find another way to tell for sure! */ -#$d_archlib ARCHLIB "$archlib" /**/ -#$d_archlib ARCHLIB_EXP "$archlibexp" /**/ - -/* DLSYM_NEEDS_UNDERSCORE: - * This symbol, if defined, indicates that we need to prepend an - * underscore to the symbol name before calling dlsym(). This only - * makes sense if you *have* dlsym, which we will presume is the - * case if you're using dl_dlopen.xs. +/* EOF_NONBLOCK: + * This symbol, if defined, indicates to the C program that a read() on + * a non-blocking file descriptor will return 0 on EOF, and not the value + * held in RD_NODATA (-1 usually, in that case!). */ -#$d_dlsymun DLSYM_NEEDS_UNDERSCORE /**/ +#define VAL_O_NONBLOCK $o_nonblock +#define VAL_EAGAIN $eagain +#define RD_NODATA $rd_nodata +#$d_eofnblk EOF_NONBLOCK -/* HAS_FSEEKO: - * This symbol, if defined, indicates that the fseeko routine is - * available to fseek beyond 32 bits (useful for ILP32 hosts). +/* Netdb_host_t: + * This symbol holds the type used for the 1st argument + * to gethostbyaddr(). */ -#$d_fseeko HAS_FSEEKO /**/ - -/* HAS_FTELLO: - * This symbol, if defined, indicates that the ftello routine is - * available to ftell from beyond 32 bits (useful for ILP32 hosts). +/* Netdb_hlen_t: + * This symbol holds the type used for the 2nd argument + * to gethostbyaddr(). */ -#$d_ftello HAS_FTELLO /**/ - -/* USE_SFIO: - * This symbol, if defined, indicates that sfio should - * be used. +/* Netdb_name_t: + * This symbol holds the type used for the argument to + * gethostbyname(). */ -#$d_sfio USE_SFIO /**/ +/* Netdb_net_t: + * This symbol holds the type used for the 1st argument to + * getnetbyaddr(). + */ +#define Netdb_host_t $netdb_host_type /**/ +#define Netdb_hlen_t $netdb_hlen_type /**/ +#define Netdb_name_t $netdb_name_type /**/ +#define Netdb_net_t $netdb_net_type /**/ -/* HAS_DBMINIT64: - * This symbol, if defined, indicates that the dbminit64 routine is - * available to open dbm files larger than 2 gigabytes. +/* IVTYPE: + * This symbol defines the C type used for Perl's IV. */ -/* HAS_DBMCLOSE64: - * This symbol, if defined, indicates that the dbmclose64 routine is - * available to close dbm files larger than 2 gigabytes. +/* UVTYPE: + * This symbol defines the C type used for Perl's UV. */ -/* HAS_FETCH64: - * This symbol, if defined, indicates that the fetch64 routine is - * available to fetch from dbm files larger than 2 gigabytes. +/* I8TYPE: + * This symbol defines the C type used for Perl's I8. */ -/* HAS_STORE64: - * This symbol, if defined, indicates that the store64 routine is - * available to store to dbm files larger than 2 gigabytes. +/* U8TYPE: + * This symbol defines the C type used for Perl's U8. */ -/* HAS_DELETE64: - * This symbol, if defined, indicates that the delete64 routine is - * available to delete from dbm files larger than 2 gigabytes. +/* I16TYPE: + * This symbol defines the C type used for Perl's I16. */ -/* HAS_FIRSTKEY64: - * This symbol, if defined, indicates that the firstkey64 routine is - * available to firstkey in dbm files larger than 2 gigabytes. +/* U16TYPE: + * This symbol defines the C type used for Perl's U16. */ -/* HAS_NEXTKEY64: - * This symbol, if defined, indicates that the nextkey64 routine is - * available to nextkey in dbm files larger than 2 gigabytes. +/* I32TYPE: + * This symbol defines the C type used for Perl's I32. */ -#$d_dbminit64 HAS_DBMINIT64 /**/ -#$d_dbmclose64 HAS_DBMCLOSE64 /**/ -#$d_fetch64 HAS_FETCH64 /**/ -#$d_store64 HAS_STORE64 /**/ -#$d_delete64 HAS_DELETE64 /**/ -#$d_firstkey64 HAS_FIRSTKEY64 /**/ -#$d_nextkey64 HAS_NEXTKEY64 /**/ - -/* USE_DYNAMIC_LOADING: - * This symbol, if defined, indicates that dynamic loading of - * some sort is available. +/* U32TYPE: + * This symbol defines the C type used for Perl's U32. */ -#$usedl USE_DYNAMIC_LOADING /**/ - -/* DB_Prefix_t: - * This symbol contains the type of the prefix structure element - * in the header file. In older versions of DB, it was - * int, while in newer ones it is u_int32_t. +/* I64TYPE: + * This symbol defines the C type used for Perl's I64. */ -/* DB_Hash_t: - * This symbol contains the type of the prefix structure element - * in the header file. In older versions of DB, it was - * int, while in newer ones it is size_t. +/* U64TYPE: + * This symbol defines the C type used for Perl's U64. */ -#define DB_Hash_t $db_hashtype /**/ -#define DB_Prefix_t $db_prefixtype /**/ - -/* I_INTTYPES: - * This symbol, if defined, indicates to the C program that it should - * include . +/* NVTYPE: + * This symbol defines the C type used for Perl's NV. */ -/* HAS_INT64_T: - * This symbol will defined if the C compiler supports int64_t. - * Usually the needs to be included, but sometimes - * is enough. +/* IVSIZE: + * This symbol contains the sizeof(IV). */ -#$i_inttypes I_INTTYPES /**/ -#$d_int64t HAS_INT64_T /**/ - -/* HAS_FSTAT64: - * This symbol, if defined, indicates that the fstat64 routine is - * available to stat files (fds) larger than 2 gigabytes. +/* UVSIZE: + * This symbol contains the sizeof(UV). + */ +/* I8SIZE: + * This symbol contains the sizeof(I8). + */ +/* U8SIZE: + * This symbol contains the sizeof(U8). */ -/* HAS_FTRUNCATE64: - * This symbol, if defined, indicates that the ftruncate64 routine is - * available to tell files larger than 2 gigabytes. +/* I16SIZE: + * This symbol contains the sizeof(I16). */ -/* HAS_LSEEK64: - * This symbol, if defined, indicates that the lseek64 routine is - * available to seek files larger than 2 gigabytes. +/* U16SIZE: + * This symbol contains the sizeof(U16). */ -/* HAS_LSTAT64: - * This symbol, if defined, indicates that the lstat64 routine is - * available to stat files (symlinks) larger than 2 gigabytes. +/* I32SIZE: + * This symbol contains the sizeof(I32). */ -/* HAS_OPEN64: - * This symbol, if defined, indicates that the open64 routine is - * available to open files larger than 2 gigabytes. +/* U32SIZE: + * This symbol contains the sizeof(U32). */ -/* HAS_OPENDIR64: - * This symbol, if defined, indicates that the opendir64 routine is - * available to opendir files larger than 2 gigabytes. +/* I64SIZE: + * This symbol contains the sizeof(I64). */ -/* HAS_READDIR64: - * This symbol, if defined, indicates that the readdir64 routine is - * available to readdir files larger than 2 gigabytes. +/* U64SIZE: + * This symbol contains the sizeof(U64). */ -/* HAS_SEEKDIR64: - * This symbol, if defined, indicates that the seekdir64 routine is - * available to seekdir files larger than 2 gigabytes. +/* NV_PRESERVES_UV: + * This symbol, if defined, indicates that a variable of type NVTYPE + * can preserve all the bit of a variable of type UVSIZE. */ -/* HAS_STAT64: - * This symbol, if defined, indicates that the stat64 routine is - * available to stat files larger than 2 gigabytes. +#define IVTYPE $ivtype /**/ +#define UVTYPE $uvtype /**/ +#define I8TYPE $i8type /**/ +#define U8TYPE $u8type /**/ +#define I16TYPE $i16type /**/ +#define U16TYPE $u16type /**/ +#define I32TYPE $i32type /**/ +#define U32TYPE $u32type /**/ +#ifdef HAS_QUAD +#define I64TYPE $i64type /**/ +#define U64TYPE $u64type /**/ +#endif +#define NVTYPE $nvtype /**/ +#define IVSIZE $ivsize /**/ +#define UVSIZE $uvsize /**/ +#define I8SIZE $i8size /**/ +#define U8SIZE $u8size /**/ +#define I16SIZE $i16size /**/ +#define U16SIZE $u16size /**/ +#define I32SIZE $i32size /**/ +#define U32SIZE $u32size /**/ +#ifdef HAS_QUAD +#define I64SIZE $i64size /**/ +#define U64SIZE $u64size /**/ +#endif +#$d_nvpresuv NV_PRESERVES_UV + +/* IVdf: + * This symbol defines the format string used for printing a Perl IV + * as a signed decimal integer. */ -/* HAS_TELLDIR64: - * This symbol, if defined, indicates that the telldir64 routine is - * available to telldir files larger than 2 gigabytes. +/* UVuf: + * This symbol defines the format string used for printing a Perl UV + * as an unsigned decimal integer. */ -/* HAS_TRUNCATE64: - * This symbol, if defined, indicates that the truncate64 routine is - * available to truncate files larger than 2 gigabytes. +/* UVof: + * This symbol defines the format string used for printing a Perl UV + * as an unsigned octal integer. */ -/* HAS_OFF64_T: - * This symbol will be defined if the C compiler supports off64_t. +/* UVxf: + * This symbol defines the format string used for printing a Perl UV + * as an unsigned hexadecimal integer. + */ +#define IVdf $ivdformat /**/ +#define UVuf $uvuformat /**/ +#define UVof $uvoformat /**/ +#define UVxf $uvxformat /**/ + +/* Pid_t: + * This symbol holds the type used to declare process ids in the kernel. + * It can be int, uint, pid_t, etc... It may be necessary to include + * to get any typedef'ed information. */ -/* HAS_STRUCT_DIRENT64: - * This symbol will be defined if the C compiler supports struct dirent64. - */ -#$d_fstat64 HAS_FSTAT64 /**/ -#$d_ftruncate64 HAS_FTRUNCATE64 /**/ -#$d_lseek64 HAS_LSEEK64 /**/ -#$d_lstat64 HAS_LSTAT64 /**/ -#$d_open64 HAS_OPEN64 /**/ -#$d_opendir64 HAS_OPENDIR64 /**/ -#$d_readdir64 HAS_READDIR64 /**/ -#$d_seekdir64 HAS_SEEKDIR64 /**/ -#$d_stat64 HAS_STAT64 /**/ -#$d_telldir64 HAS_TELLDIR64 /**/ -#$d_truncate64 HAS_TRUNCATE64 /**/ -#$d_off64t HAS_OFF64_T /**/ -#$d_dirent64s HAS_STRUCT_DIRENT64 /**/ +#define Pid_t $pidtype /* PID type */ /* PRIVLIB: * This symbol contains the name of the private library for this package. @@ -2082,6 +2569,39 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #define PRIVLIB "$privlib" /**/ #define PRIVLIB_EXP "$privlibexp" /**/ +/* PTRSIZE: + * This symbol contains the size of a pointer, so that the C preprocessor + * can make decisions based on it. It will be sizeof(void *) if + * the compiler supports (void *); otherwise it will be + * sizeof(char *). + */ +#define PTRSIZE $ptrsize /**/ + +/* Drand01: + * This macro is to be used to generate uniformly distributed + * random numbers over the range [0., 1.[. You may have to supply + * an 'extern double drand48();' in your program since SunOS 4.1.3 + * doesn't provide you with anything relevant in it's headers. + * See HAS_DRAND48_PROTO. + */ +/* Rand_seed_t: + * This symbol defines the type of the argument of the + * random seed function. + */ +/* seedDrand01: + * This symbol defines the macro to be used in seeding the + * random number generator (see Drand01). + */ +/* RANDBITS: + * This symbol indicates how many bits are produced by the + * function used to generate normalized random numbers. + * Values include 15, 16, 31, and 48. + */ +#define Drand01() $drand01 /**/ +#define Rand_seed_t $randseedtype /**/ +#define seedDrand01(x) $seedfunc((Rand_seed_t)x) /**/ +#define RANDBITS $randbits /**/ + /* SELECT_MIN_BITS: * This symbol holds the minimum number of bits operated by select. * That is, if you do select(n, ...), how many bits at least will be @@ -2089,7 +2609,46 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- * is either n or 32*ceil(n/32), especially many little-endians do * the latter. This is only useful if you have select(), naturally. */ -#define SELECT_MIN_BITS $selectminbits /**/ +#define SELECT_MIN_BITS $selectminbits /**/ + +/* Select_fd_set_t: + * This symbol holds the type used for the 2nd, 3rd, and 4th + * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET + * is defined, and 'int *' otherwise. This is only useful if you + * have select(), of course. + */ +#define Select_fd_set_t $selecttype /**/ + +/* SIG_NAME: + * This symbol contains a list of signal names in order of + * signal number. This is intended + * to be used as a static array initialization, like this: + * char *sig_name[] = { SIG_NAME }; + * The signals in the list are separated with commas, and each signal + * is surrounded by double quotes. There is no leading SIG in the signal + * name, i.e. SIGQUIT is known as "QUIT". + * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn, + * etc., where nn is the actual signal number (e.g. NUM37). + * The signal number for sig_name[i] is stored in sig_num[i]. + * The last element is 0 to terminate the list with a NULL. This + * corresponds to the 0 at the end of the sig_num list. + */ +/* SIG_NUM: + * This symbol contains a list of signal numbers, in the same order as the + * SIG_NAME list. It is suitable for static array initialization, as in: + * int sig_num[] = { SIG_NUM }; + * The signals in the list are separated with commas, and the indices + * within that list and the SIG_NAME list match, so it's easy to compute + * the signal name from a number or vice versa at the price of a small + * dynamic linear lookup. + * Duplicates are allowed, but are moved to the end of the list. + * The signal number corresponding to sig_name[i] is sig_number[i]. + * if (i < NSIG) then sig_number[i] == i. + * The last element is 0, corresponding to the 0 at the end of + * the sig_name list. + */ +#define SIG_NAME $sig_name_init /**/ +#define SIG_NUM $sig_num_init /**/ /* SITEARCH: * This symbol contains the name of the private library for this package. @@ -2097,8 +2656,10 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- * execution path, but it should be accessible by the world. The program * should be prepared to do ~ expansion. * The standard distribution will put nothing in this directory. - * Individual sites may place their own extensions and modules in - * this directory. + * After perl has been installed, users may install their own local + * architecture-dependent modules in this directory with + * MakeMaker Makefile.PL + * or equivalent. See INSTALL for details. */ /* SITEARCH_EXP: * This symbol contains the ~name expanded version of SITEARCH, to be used @@ -2113,8 +2674,10 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- * execution path, but it should be accessible by the world. The program * should be prepared to do ~ expansion. * The standard distribution will put nothing in this directory. - * Individual sites may place their own extensions and modules in - * this directory. + * After perl has been installed, users may install their own local + * architecture-independent modules in this directory with + * MakeMaker Makefile.PL + * or equivalent. See INSTALL for details. */ /* SITELIB_EXP: * This symbol contains the ~name expanded version of SITELIB, to be used @@ -2123,6 +2686,24 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #define SITELIB "$sitelib" /**/ #define SITELIB_EXP "$sitelibexp" /**/ +/* Size_t: + * This symbol holds the type used to declare length parameters + * for string functions. It is usually size_t, but may be + * unsigned long, int, etc. It may be necessary to include + * to get any typedef'ed information. + */ +#define Size_t $sizetype /* length paramater for string functions */ + +/* SSize_t: + * This symbol holds the type used by functions that return + * a count of bytes or an error condition. It must be a signed type. + * It is usually ssize_t, but may be long or int, etc. + * It may be necessary to include or + * to get any typedef'ed information. + * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t). + */ +#define SSize_t $ssizetype /* signed count of bytes */ + /* STARTPERL: * This variable contains the string to put in front of a perl * script to make sure (one hopes) that it runs with perl and not @@ -2130,255 +2711,146 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #define STARTPERL "$startperl" /**/ -/* HAS_FGETPOS64: - * This symbol, if defined, indicates that the fgetpos64 routine is - * available to getpos files larger than 2 gigabytes. +/* HAS_STDIO_STREAM_ARRAY: + * This symbol, if defined, tells that there is an array + * holding the stdio streams. */ -/* HAS_FOPEN64: - * This symbol, if defined, indicates that the fopen64 routine is - * available to open files larger than 2 gigabytes. - */ -/* HAS_FREOPEN64: - * This symbol, if defined, indicates that the freopen64 routine is - * available to reopen files larger than 2 gigabytes. - */ -/* HAS_FSEEK64: - * This symbol, if defined, indicates that the fseek64 routine is - * available to seek files larger than 2 gigabytes. - */ -/* HAS_FSEEKO64: - * This symbol, if defined, indicates that the fseeko64 routine is - * available to seek files larger than 2 gigabytes. - */ -/* HAS_FSETPOS64: - * This symbol, if defined, indicates that the fsetpos64 routine is - * available to setpos files larger than 2 gigabytes. - */ -/* HAS_FTELL64: - * This symbol, if defined, indicates that the ftell64 routine is - * available to tell files larger than 2 gigabytes. - */ -/* HAS_FTELLO64: - * This symbol, if defined, indicates that the ftello64 routine is - * available to tell files larger than 2 gigabytes. - */ -/* HAS_TMPFILE64: - * This symbol, if defined, indicates that the tmpfile64 routine is - * available to tmpfile files larger than 2 gigabytes. - */ -#$d_fgetpos64 HAS_FGETPOS64 /**/ -#$d_fopen64 HAS_FOPEN64 /**/ -#$d_freopen64 HAS_FREOPEN64 /**/ -#$d_fseek64 HAS_FSEEK64 /**/ -#$d_fseeko64 HAS_FSEEKO64 /**/ -#$d_fsetpos64 HAS_FSETPOS64 /**/ -#$d_ftell64 HAS_FTELL64 /**/ -#$d_ftello64 HAS_FTELLO64 /**/ -#$d_tmpfile64 HAS_TMPFILE64 /**/ - -/* USE_64_BITS: - * This symbol, if defined, indicates that 64-bit interfaces should - * be used when available. If not defined, the native default interfaces - * will be used (be they 32 or 64 bits). - */ -#$use64bits USE_64_BITS /**/ - -/* USE_PERLIO: - * This symbol, if defined, indicates that the PerlIO abstraction should - * be used throughout. If not defined, stdio should be - * used in a fully backward compatible manner. - */ -#$useperlio USE_PERLIO /**/ - -/* HAS_DRAND48_PROTO: - * This symbol, if defined, indicates that the system provides - * a prototype for the drand48() function. Otherwise, it is up - * to the program to supply one. A good guess is - * extern double drand48 _((void)); - */ -#$d_drand48proto HAS_DRAND48_PROTO /**/ - -/* HAS_GETHOST_PROTOS: - * This symbol, if defined, indicates that includes - * prototypes for gethostent(), gethostbyname(), and - * gethostbyaddr(). Otherwise, it is up to the program to guess - * them. See netdbtype.U for probing for various Netdb_xxx_t types. +/* STDIO_STREAM_ARRAY: + * This symbol tells the name of the array holding the stdio streams. + * Usual values include _iob, __iob, and __sF. */ -#$d_gethostprotos HAS_GETHOST_PROTOS /**/ +#$d_stdio_stream_array HAS_STDIO_STREAM_ARRAY /**/ +#define STDIO_STREAM_ARRAY $stdio_stream_array -/* HAS_GETNET_PROTOS: - * This symbol, if defined, indicates that includes - * prototypes for getnetent(), getnetbyname(), and - * getnetbyaddr(). Otherwise, it is up to the program to guess - * them. See netdbtype.U for probing for various Netdb_xxx_t types. +/* Uid_t_f: + * This symbol defines the format string used for printing a Uid_t. */ -#$d_getnetprotos HAS_GETNET_PROTOS /**/ +#define Uid_t_f $uidformat /**/ -/* HAS_GETPROTO_PROTOS: - * This symbol, if defined, indicates that includes - * prototypes for getprotoent(), getprotobyname(), and - * getprotobyaddr(). Otherwise, it is up to the program to guess - * them. See netdbtype.U for probing for various Netdb_xxx_t types. +/* Uid_t_size: + * This symbol holds the size of a Uid_t in bytes. */ -#$d_getprotoprotos HAS_GETPROTO_PROTOS /**/ +#define Uid_t_size $uidsize /* UID size */ -/* HAS_GETSERV_PROTOS: - * This symbol, if defined, indicates that includes - * prototypes for getservent(), getservbyname(), and - * getservbyaddr(). Otherwise, it is up to the program to guess - * them. See netdbtype.U for probing for various Netdb_xxx_t types. +/* Uid_t: + * This symbol holds the type used to declare user ids in the kernel. + * It can be int, ushort, uid_t, etc... It may be necessary to include + * to get any typedef'ed information. */ -#$d_getservprotos HAS_GETSERV_PROTOS /**/ +#define Uid_t $uidtype /* UID type */ -/* Netdb_host_t: - * This symbol holds the type used for the 1st argument - * to gethostbyaddr(). - */ -/* Netdb_hlen_t: - * This symbol holds the type used for the 2nd argument - * to gethostbyaddr(). - */ -/* Netdb_name_t: - * This symbol holds the type used for the argument to - * gethostbyname(). - */ -/* Netdb_net_t: - * This symbol holds the type used for the 1st argument to - * getnetbyaddr(). +/* USE_64_BITS: + * This symbol, if defined, indicates that 64-bit integers should + * be used when available. If not defined, the native integers + * will be used (be they 32 or 64 bits). */ -#define Netdb_host_t $netdb_host_type /**/ -#define Netdb_hlen_t $netdb_hlen_type /**/ -#define Netdb_name_t $netdb_name_type /**/ -#define Netdb_net_t $netdb_net_type /**/ +#ifndef USE_64_BITS +#$use64bits USE_64_BITS /**/ +#endif -/* Select_fd_set_t: - * This symbol holds the type used for the 2nd, 3rd, and 4th - * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET - * is defined, and 'int *' otherwise. This is only useful if you - * have select(), of course. +/* USE_LARGE_FILES: + * This symbol, if defined, indicates that large file support + * should be used when available. The USE_64_BITS symbol will + * also be turned on if necessary. */ -#define Select_fd_set_t $selecttype /**/ +#ifndef USE_LARGE_FILES +#$uselargefiles USE_LARGE_FILES /**/ +#endif -/* ARCHNAME: - * This symbol holds a string representing the architecture name. - * It may be used to construct an architecture-dependant pathname - * where library files may be held under a private library, for - * instance. +/* USE_LONG_DOUBLE: + * This symbol, if defined, indicates that long doubles should + * be used when available. */ -#define ARCHNAME "$archname" /**/ +#ifndef USE_LONG_DOUBLE +#$uselongdouble USE_LONG_DOUBLE /**/ +#endif -/* HAS_PTHREAD_YIELD: - * This symbol, if defined, indicates that the pthread_yield - * routine is available to yield the execution of the current - * thread. sched_yield is preferable to pthread_yield. - */ -/* SCHED_YIELD: - * This symbol defines the way to yield the execution of - * the current thread. Known ways are sched_yield, - * pthread_yield, and pthread_yield with NULL. +/* USE_LONG_LONG: + * This symbol, if defined, indicates that long longs should + * be used when available. */ -/* HAS_SCHED_YIELD: - * This symbol, if defined, indicates that the sched_yield - * routine is available to yield the execution of the current - * thread. sched_yield is preferable to pthread_yield. - */ -#$d_pthread_yield HAS_PTHREAD_YIELD /**/ -#define SCHED_YIELD $sched_yield /**/ -#$d_sched_yield HAS_SCHED_YIELD /**/ +#ifndef USE_LONG_LONG +#$uselonglong USE_LONG_LONG /**/ +#endif -/* I_MACH_CTHREADS: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -#$i_machcthr I_MACH_CTHREADS /**/ +#ifndef USE_MORE_BITS +#$usemorebits USE_MORE_BITS /**/ +#endif /* MULTIPLICITY: * This symbol, if defined, indicates that Perl should * be built to use multiplicity. */ +#ifndef MULTIPLICTY #$usemultiplicity MULTIPLICITY /**/ +#endif -/* USE_THREADS: - * This symbol, if defined, indicates that Perl should - * be built to use threads. - */ -/* OLD_PTHREADS_API: - * This symbol, if defined, indicates that Perl should - * be built to use the old draft POSIX threads API. - */ -#$usethreads USE_THREADS /**/ -#$d_oldpthreads OLD_PTHREADS_API /**/ - -/* Time_t: - * This symbol holds the type returned by time(). It can be long, - * or time_t on BSD sites (in which case should be - * included). - */ -#define Time_t $timetype /* Time type */ - -/* HAS_TIMES: - * This symbol, if defined, indicates that the times() routine exists. - * Note that this became obsolete on some systems (SUNOS), which now - * use getrusage(). It may be necessary to include . - */ -#$d_times HAS_TIMES /**/ - -/* Fpos_t: - * This symbol holds the type used to declare file positions in libc. - * It can be fpos_t, long, uint, etc... It may be necessary to include - * to get any typedef'ed information. +/* USE_PERLIO: + * This symbol, if defined, indicates that the PerlIO abstraction should + * be used throughout. If not defined, stdio should be + * used in a fully backward compatible manner. */ -#define Fpos_t $fpostype /* File position type */ +#ifndef USE_PERLIO +#$useperlio USE_PERLIO /**/ +#endif -/* Gid_t: - * This symbol holds the return type of getgid() and the type of - * argument to setrgid() and related functions. Typically, - * it is the type of group ids in the kernel. It can be int, ushort, - * uid_t, etc... It may be necessary to include to get - * any typedef'ed information. +/* USE_SOCKS: + * This symbol, if defined, indicates that Perl should + * be built to use socks. */ -#define Gid_t $gidtype /* Type for getgid(), etc... */ +#ifndef USE_SOCKS +#$usesocks USE_SOCKS /**/ +#endif -/* Off_t: - * This symbol holds the type used to declare offsets in the kernel. - * It can be int, long, off_t, etc... It may be necessary to include - * to get any typedef'ed information. - */ -/* LSEEKSIZE: - * This symbol holds the number of bytes used by the Off_t. +/* USE_ITHREADS: + * This symbol, if defined, indicates that Perl should be built to + * use the interpreter-based threading implementation. */ -#define Off_t $lseektype /* type */ -#define LSEEKSIZE $lseeksize /* size */ - -/* Mode_t: - * This symbol holds the type used to declare file modes - * for systems calls. It is usually mode_t, but may be - * int or unsigned short. It may be necessary to include - * to get any typedef'ed information. +/* USE_5005THREADS: + * This symbol, if defined, indicates that Perl should be built to + * use the 5.005-based threading implementation. */ -#define Mode_t $modetype /* file mode parameter for system calls */ - -/* Pid_t: - * This symbol holds the type used to declare process ids in the kernel. - * It can be int, uint, pid_t, etc... It may be necessary to include - * to get any typedef'ed information. +/* OLD_PTHREADS_API: + * This symbol, if defined, indicates that Perl should + * be built to use the old draft POSIX threads API. */ -#define Pid_t $pidtype /* PID type */ +#$use5005threads USE_5005THREADS /**/ +#$useithreads USE_ITHREADS /**/ +#if defined(USE_5005THREADS) && !defined(USE_ITHREADS) +#define USE_THREADS /* until src is revised*/ +#endif +#$d_oldpthreads OLD_PTHREADS_API /**/ -/* Size_t: - * This symbol holds the type used to declare length parameters - * for string functions. It is usually size_t, but may be - * unsigned long, int, etc. It may be necessary to include - * to get any typedef'ed information. +/* PERL_VENDORLIB_EXP: + * This symbol contains the ~name expanded version of VENDORLIB, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. */ -#define Size_t $sizetype /* length paramater for string functions */ +#$d_vendorlib PERL_VENDORLIB_EXP "$vendorlibexp" /**/ -/* Uid_t: - * This symbol holds the type used to declare user ids in the kernel. - * It can be int, ushort, uid_t, etc... It may be necessary to include - * to get any typedef'ed information. +/* VOIDFLAGS: + * This symbol indicates how much support of the void type is given by this + * compiler. What various bits mean: + * + * 1 = supports declaration of void + * 2 = supports arrays of pointers to functions returning void + * 4 = supports comparisons between pointers to void functions and + * addresses of void functions + * 8 = suports declaration of generic void pointers + * + * The package designer should define VOIDUSED to indicate the requirements + * of the package. This can be done either by #defining VOIDUSED before + * including config.h, or by defining defvoidused in Myinit.U. If the + * latter approach is taken, only those flags will be tested. If the + * level of void support necessary is not present, defines void to int. */ -#define Uid_t $uidtype /* UID type */ +#ifndef VOIDUSED +#define VOIDUSED $defvoidused +#endif +#define VOIDFLAGS $voidflags +#if (VOIDFLAGS & VOIDUSED) != VOIDUSED +#define void int /* is void to be avoided? */ +#define M_VOID /* Xenix strikes again */ +#endif #endif !GROK!THIS!