;;
esac
-case $CROSS_NAME in
-'')
- Makefile=Makefile
- ;;
-*)
- # if cross-compilation, the Makefile named accordingly
- Makefile=Makefile-cross-$CROSS_NAME
- . Cross/config-${CROSS_NAME}.sh
- ;;
-esac
+Makefile=Makefile
: This forces SH files to create target in same directory as SH file.
: This is so that make depend always knows where to find SH derivatives.
sunos*)
linklibperl="-lperl"
;;
- netbsd*|freebsd[234]*|openbsd*|dragonfly*)
+ netbsd*|freebsd[234]*|openbsd*|dragonfly*|bitrig*)
linklibperl="-L. -lperl"
;;
interix*)
LDLIBPTH = $ldlibpth
# Sometimes running an executable is an adventure.
-RUN = $run
+RUN =
+
+# When cross-compiling we want to use a (mini)perl built for the host, not the target
+HOST_PERL = $hostperl
+HOST_GENERATE = $hostgenerate
+SYSTEM_PERL = $perl
# These variables may need to be manually set for non-Unix systems.
AR = $full_ar
# Macros to invoke a copy of miniperl during the build. Targets which
# are built using these macros should depend on \$(MINIPERL_EXE)
MINIPERL_EXE = miniperl\$(EXE_EXT)
-MINIPERL = \$(LDLIBPTH) \$(RUN) ./miniperl\$(EXE_EXT) -Ilib
+MINIPERL = \$(LDLIBPTH) ./miniperl\$(EXE_EXT) -Ilib
+
+!GROK!THIS!
+case "$usecrosscompile$perl" in
+define?*)
+ $spitshell >>$Makefile <<!GROK!THIS!
+# Macros to invoke a copy of our fully operational perl during the build.
+PERL_EXE = perl\$(EXE_EXT)
+RUN_PERL = \$(LDLIBPTH) \$(RUN) $perl\$(EXE_EXT)
+!GROK!THIS!
+ ;;
+*)
+ $spitshell >>$Makefile <<!GROK!THIS!
# Macros to invoke a copy of our fully operational perl during the build.
PERL_EXE = perl\$(EXE_EXT)
-RUN_PERL = \$(LDLIBPTH) \$(RUN) ./perl\$(EXE_EXT)
+RUN_PERL = \$(LDLIBPTH) \$(RUN) ./perl\$(EXE_EXT) -Ilib
+!GROK!THIS!
+ ;;
+esac
+$spitshell >>$Makefile <<!GROK!THIS!
# Macros to run our tests
RUN_TESTS = \$(LDLIBPTH) ./runtests
;;
esac
-case $CROSS_NAME in
-'')
## In the following dollars and backticks do not need the extra backslash.
$spitshell >>$Makefile <<'!NO!SUBS!'
-CCCMD = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $@`
+CCCMD = sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $@
-CCCMDSRC = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $<`
+CCCMDSRC = sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $<
CONFIGPM_FROM_CONFIG_SH = lib/Config.pm lib/Config_heavy.pl
CONFIGPM = $(CONFIGPM_FROM_CONFIG_SH) lib/Config_git.pl
CONFIGH = config.h
!NO!SUBS!
- ;;
-*)
- # if cross-compilation
-$spitshell >>$Makefile <<!GROK!THIS!
-CROSS_NAME = $CROSS_NAME
-CROSS_LIB = xlib/$CROSS_NAME
-
-CCCMD = \`sh \$(shellflags) cflags-cross-$CROSS_NAME "optimize='\$(OPTIMIZE)'" \$@\` -I\$(CROSS_LIB)
-CCCMDSRC = \`sh \$(shellflags) cflags-cross-$CROSS_NAME "optimize='\$(OPTIMIZE)'" \$<\` -I\$(CROSS_LIB)
-CONFIGPM = xlib/\$(CROSS_NAME)/Config.pm
-CONFIGPOD = xlib/\$(CROSS_NAME)/Config.pod
-CONFIGH = xconfig.h
-
-xconfig.h: config_h.SH Cross/config-\$(CROSS_NAME).sh
- CONFIG_SH=Cross/config-\$(CROSS_NAME).sh CONFIG_H=xconfig.h \$(SHELL) config_h.SH
- #TODO \$(LDLIBPTH) ./miniperl$(EXE_EXT) -Ilib -MCross=\$(CROSS_NAME) config_h.PL "INST_VER=\$(INST_VER)" "CORE_DIR=\$(CROSS_LIB)" "CONFIG_H=xconfig.h"
- cp xconfig.h \$(CROSS_LIB)/
- cp xconfig.h \$(CROSS_LIB)/config.h
-
-!GROK!THIS!
- ;;
-esac
SH_to_target() {
echo $@ | sed -e s/\\\.SH//g -e s/_/./g
}
-SH='Makefile.SH cflags.SH config_h.SH makedepend.SH myconfig.SH runtests.SH pod/Makefile.SH x2p/Makefile.SH'
+SH='Makefile.SH cflags.SH config_h.SH makedepend.SH myconfig.SH runtests.SH pod/Makefile.SH'
shextract=`SH_to_target $SH`
## In the following dollars and backticks do not need the extra backslash.
c1 = av.c scope.c op.c doop.c doio.c dump.c gv.c hv.c mg.c reentr.c mro.c perl.c
c2 = perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c sv.c
c3 = taint.c toke.c util.c deb.c run.c universal.c pad.c globals.c keywords.c
-c4 = perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c
+c4 = perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c caretx.c
c5 = $(madlysrc) $(mallocsrc)
c = $(c1) $(c2) $(c3) $(c4) $(c5) miniperlmain.c opmini.c perlmini.c
obj0mini = perlmini$(OBJ_EXT) opmini$(OBJ_EXT) miniperlmain$(OBJ_EXT)
obj1 = $(madlyobj) $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT) mro$(OBJ_EXT) keywords$(OBJ_EXT)
obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
-obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) mathoms$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT)
+obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) mathoms$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT) caretx$(OBJ_EXT)
minindt_obj = $(obj0mini) $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
mini_obj = $(minindt_obj) $(MINIDTRACE_O)
ndt_obj = $(obj0) $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
obj = $(ndt_obj) $(DTRACE_O)
-perltoc_pod_prereqs = extra.pods pod/perl5192delta.pod pod/perlapi.pod pod/perlintern.pod pod/perlmodlib.pod pod/perluniprops.pod
+perltoc_pod_prereqs = extra.pods pod/perl5211delta.pod pod/perlapi.pod pod/perlintern.pod pod/perlmodlib.pod pod/perluniprops.pod
generated_pods = pod/perltoc.pod $(perltoc_pod_prereqs)
generated_headers = uudmap.h bitcount.h mg_data.h
splintfiles = $(c1)
.c$(OBJ_EXT):
- $(CCCMD) $(PLDLFLAGS) $*.c
+ @echo `$(CCCMD)` $(PLDLFLAGS) $*.c
+ @`$(CCCMD)` $(PLDLFLAGS) $*.c
.c.i:
- $(CCCMDSRC) -E $*.c > $*.i
+ @echo `$(CCCMDSRC)` -E $*.c \> $*.i
+ @`$(CCCMDSRC)` -E $*.c > $*.i
.c.s:
- $(CCCMDSRC) -S $*.c
+ @echo `$(CCCMDSRC)` -S $*.c
+ @`$(CCCMDSRC)` -S $*.c
all: $(FIRSTMAKEFILE) $(MINIPERL_EXE) $(generated_pods) $(private) $(unidatafiles) $(public) $(dynamic_ext) $(nonxs_ext) extras.make
@echo " ";
case "$usedl$static_cwd" in
defineundef)
util_deps='$(MINIPERL_EXE) $(CONFIGPM) lib/auto/Cwd/Cwd$(DLSUFFIX) FORCE'
- x2p_deps="\$(MINIPERL_EXE) \$(CONFIGPM) \$(dynamic_ext) x2p/$firstmakefile FORCE"
;;
definedefine)
util_deps='$(PERL_EXE) $(CONFIGPM) FORCE'
- x2p_deps="\$(PERL_EXE) \$(CONFIGPM) \$(dynamic_ext) x2p/$firstmakefile FORCE"
;;
*) util_deps='$(PERL_EXE) $(CONFIGPM) FORCE'
- x2p_deps="\$(PERL_EXE) \$(CONFIGPM) x2p/$firstmakefile FORCE"
;;
esac
$spitshell >>$Makefile <<!GROK!THIS!
-x2p/$firstmakefile: makedepend
- cd x2p; \$(MAKE) depend
-
-translators: $x2p_deps
- @echo " "; echo " Making x2p stuff"; cd x2p; \$(LDLIBPTH) \$(MAKE) all
-
-x2p/s2p: $x2p_deps
- cd x2p; \$(LDLIBPTH) \$(MAKE) s2p
-
-x2p/find2perl: $x2p_deps
- cd x2p; \$(LDLIBPTH) \$(MAKE) find2perl
-
utils/Makefile: \$(MINIPERL_EXE) \$(CONFIGPM) utils/Makefile.PL
\$(MINIPERL) -Ilib utils/Makefile.PL
$spitshell >>$Makefile <<!GROK!THIS!
${file}mini\$(OBJ_EXT): ${file}mini.c
- \$(CCCMD) \$(PLDLFLAGS) $DPERL_IS_MINIPERL $DPERL_EXTERNAL_GLOB ${file}mini.c
+ echo @\`\$(CCCMD)\` \$(PLDLFLAGS) $DPERL_IS_MINIPERL $DPERL_EXTERNAL_GLOB ${file}mini.c
+ @\`\$(CCCMD)\` \$(PLDLFLAGS) $DPERL_IS_MINIPERL $DPERL_EXTERNAL_GLOB ${file}mini.c
!GROK!THIS!
done
uudmap.h mg_data.h: bitcount.h
-bitcount.h: generate_uudmap$(HOST_EXE_EXT)
- $(RUN) ./generate_uudmap$(HOST_EXE_EXT) $(generated_headers)
-
generate_uudmap$(OBJ_EXT): mg_raw.h
+!NO!SUBS!
+
+# If hostgerenate isn't defined, then we have to build
+# generate_uudmap and run it. This can potentially mean running
+# it on the target system if we're cross-compiling.
+# If it is defined, then we just run it locally.
+case "$hostgenerate" in
+'')
+$spitshell >>$Makefile <<!GROK!THIS!
+bitcount.h: generate_uudmap\$(HOST_EXE_EXT)
+ $run ./generate_uudmap\$(HOST_EXE_EXT) \$(generated_headers)
+ -@for f in \$(generated_headers); do \\
+ $from \$\$f; \\
+ done
+
+!GROK!THIS!
+
+$spitshell >>$Makefile <<'!NO!SUBS!'
generate_uudmap$(HOST_EXE_EXT): generate_uudmap$(OBJ_EXT)
$(CC) -o generate_uudmap$(EXE_EXT) $(LDFLAGS) generate_uudmap$(OBJ_EXT) $(libs)
+!NO!SUBS!
+;;
+*)
+$spitshell >>$Makefile <<'!NO!SUBS!'
+bitcount.h: generate_uudmap$(HOST_EXE_EXT)
+ ./generate_uudmap$(HOST_EXE_EXT) $(generated_headers)
+
+generate_uudmap$(HOST_EXE_EXT): generate_uudmap$(OBJ_EXT)
+ -@rm generate_uudmap$(HOST_EXE_EXT)
+ $(LNS) $(HOST_GENERATE) generate_uudmap$(HOST_EXE_EXT)
+
+!NO!SUBS!
+;;
+esac
+
+
+$spitshell >>$Makefile <<'!NO!SUBS!'
perlmain.c: $(MINIPERL_EXE) ext/ExtUtils-Miniperl/pm_to_blib
$(MINIPERL) -Ilib -MExtUtils::Miniperl -e 'writemain(\"perlmain.c", @ARGV)' DynaLoader $(static_ext)
# lib/buildcustomize.pl despite the reality that lib/buildcustomize.pl needs
# miniperl to exist first permits us to
# a) have one rule generate both miniperl and lib/buildcustomize.pl
-# (so that lib/buildcustomise.pl is always available. This simplifies things)
+# (so that lib/buildcustomize.pl is always available. This simplifies things)
# b) have the rest of the Makefile depend on the more obvious $(MINIPERL_EXE)
$(MINIPERL_EXE): lib/buildcustomize.pl
$spitshell >>$Makefile <<'!NO!SUBS!'
lib/buildcustomize.pl: $& $(mini_obj)
$(CC) -o $(MINIPERL_EXE) $(CLDFLAGS) $(mini_obj) $(libs)
- $(LDLIBPTH) $(RUN) ./miniperl$(HOST_EXE_EXT) -w -Ilib -Idist/Exporter/lib -MExporter -e '<?>' || sh -c 'echo >&2 Failed to build miniperl. Please run make minitest; exit 1'
+ $(LDLIBPTH) ./miniperl$(HOST_EXE_EXT) -w -Ilib -Idist/Exporter/lib -MExporter -e '<?>' || sh -c 'echo >&2 Failed to build miniperl. Please run make minitest; exit 1'
$(MINIPERL) -f write_buildcustomize.pl
!NO!SUBS!
;;
$spitshell >>$Makefile <<'!NO!SUBS!'
lib/buildcustomize.pl: $& $(mini_obj) write ldcustomize.pl
$(CC) -o $(MINIPERL_EXE) $(mini_obj libs)
- $(LDLIBPTH) $(RUN) ./miniperl$(HOST _EXT) -w -Ilib -Idist/Exporter/lib -MExporter -e '<?>' || sh -c 'echo >&2 Failed to build miniperl. Please run make minitest; exit 1'
+ $(LDLIBPTH) ./miniperl$(HOST _EXT) -w -Ilib -Idist/Exporter/lib -MExporter -e '<?>' || sh -c 'echo >&2 Failed to build miniperl. Please run make minitest; exit 1'
$(MINIPERL) -f write_buildcustomize.pl
!NO!SUBS!
;;
-@rm -f miniperl.xok
$(CC) $(CLDFLAGS) $(NAMESPACEFLAGS) -o $(MINIPERL_EXE) \
$(mini_obj) $(libs)
- $(LDLIBPTH) $(RUN) ./miniperl$(HOST_EXE_EXT) -w -Ilib -Idist/Exporter/lib -MExporter -e '<?>' || sh -c 'echo >&2 Failed to build miniperl. Please run make minitest; exit 1'
+ $(LDLIBPTH) ./miniperl$(HOST_EXE_EXT) -w -Ilib -Idist/Exporter/lib -MExporter -e '<?>' || sh -c 'echo >&2 Failed to build miniperl. Please run make minitest; exit 1'
$(MINIPERL) -f write_buildcustomize.pl
!NO!SUBS!
;;
*)
- $spitshell >>$Makefile <<'!NO!SUBS!'
+ if test "X$hostperl" != X; then
+ $spitshell >>$Makefile <<!GROK!THIS!
+lib/buildcustomize.pl: \$& \$(mini_obj) write_buildcustomize.pl
+ -@rm -f miniperl.xok
+ -@rm \$(MINIPERL_EXE)
+ \$(LNS) \$(HOST_PERL) \$(MINIPERL_EXE)
+ \$(LDLIBPTH) ./miniperl\$(HOST_EXE_EXT) -w -Ilib -Idist/Exporter/lib -MExporter -e '<?>' || sh -c 'echo >&2 Failed to build miniperl. Please run make minitest; exit 1'
+ \$(MINIPERL) -f write_buildcustomize.pl 'osname' "$osname"
+!GROK!THIS!
+ else
+ $spitshell >>$Makefile <<'!NO!SUBS!'
lib/buildcustomize.pl: $& $(mini_obj) write_buildcustomize.pl
-@rm -f miniperl.xok
- $(LDLIBPTH) $(CC) $(CLDFLAGS) -o $(MINIPERL_EXE) \
+ $(CC) $(CLDFLAGS) -o $(MINIPERL_EXE) \
$(mini_obj) $(libs)
- $(LDLIBPTH) $(RUN) ./miniperl$(HOST_EXE_EXT) -w -Ilib -Idist/Exporter/lib -MExporter -e '<?>' || sh -c 'echo >&2 Failed to build miniperl. Please run make minitest; exit 1'
+ $(LDLIBPTH) ./miniperl$(HOST_EXE_EXT) -w -Ilib -Idist/Exporter/lib -MExporter -e '<?>' || sh -c 'echo >&2 Failed to build miniperl. Please run make minitest; exit 1'
$(MINIPERL) -f write_buildcustomize.pl
!NO!SUBS!
+ fi
;;
esac
$(PERL_EXE): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) write_buildcustomize.pl
-@rm -f miniperl.xok
- $(SHRPENV) $(LDLIBPTH) $(CC) -o perl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+ $(SHRPENV) $(CC) -o perl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
# Microperl. This is just a convenience thing if one happens to
# build also the full Perl and therefore the real big Makefile:
# But also this ensures that all extensions are built before we try to scan
# them, which picks up Devel::PPPort's documentation.
pod/perltoc.pod: $(perltoc_pod_prereqs) $(PERL_EXE) $(ext) pod/buildtoc
- $(RUN_PERL) -f -Ilib pod/buildtoc -q
+ $(RUN_PERL) -f pod/buildtoc -q
pod/perlapi.pod: pod/perlintern.pod
pod/perlmodlib.pod: $(MINIPERL_EXE) pod/perlmodlib.PL MANIFEST
$(MINIPERL) pod/perlmodlib.PL -q
-pod/perl5192delta.pod: pod/perldelta.pod
- $(RMS) pod/perl5192delta.pod
- $(LNS) perldelta.pod pod/perl5192delta.pod
+pod/perl5211delta.pod: pod/perldelta.pod
+ $(RMS) pod/perl5211delta.pod
+ $(LNS) perldelta.pod pod/perl5211delta.pod
extra.pods: $(MINIPERL_EXE)
-@test ! -f extra.pods || rm -f `cat extra.pods`
done
extras.make: $(PERL_EXE)
- -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst`
+ -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst`
extras.test: $(PERL_EXE)
- -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) -Ilib -MCPAN -e '@ARGV&&test(@ARGV)' `cat extras.lst`
+ -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) -MCPAN -e '@ARGV&&test(@ARGV)' `cat extras.lst`
extras.install: $(PERL_EXE)
- -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst`
+ -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst`
.PHONY: install install-strip install-all install-verbose install-silent \
no-install install.perl install.man install.html
-install_strip install-strip:
- $(MAKE) STRIPFLAGS=-s install DESTDIR="$(DESTDIR)"
+# Set this to an empty string to avoid an attempt of rebuild before install
+INSTALL_DEPENDENCE = all
-install_all install-all:
- $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) DESTDIR="$(DESTDIR)"
+no_install no-install: install-notify
-install_verbose install-verbose:
- $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-V DESTDIR="$(DESTDIR)"
+install: install-all
+!NO!SUBS!
-install_silent install-silent:
- $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-S DESTDIR="$(DESTDIR)"
-install_notify install-notify:
- $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-n DESTDIR="$(DESTDIR)"
+for name in all notify silent strip verbose; do
+ flags="--$name";
+ flags=`echo $flags | sed -e 's/--all//'`
+ if test "X$hostperl" != X; then
+ $spitshell >>$Makefile <<EOT
-# Set this to an empty string to avoid an attempt of rebuild before install
-INSTALL_DEPENDENCE = all
+install_$name install-$name: \$(INSTALL_DEPENDENCE) installperl all installman
+ \$(HOST_PERL) installperl --destdir=\$(DESTDIR) $flags \$(INSTALLFLAGS) \$(STRIPFLAGS)
+ \$(HOST_PERL) installman --destdir=\$(DESTDIR) $flags
+EOT
+ else
+ $spitshell >>$Makefile <<EOT
-no_install no-install: install-notify
+install_$name install-$name: \$(INSTALL_DEPENDENCE) installperl all installman
+ \$(RUN_PERL) installperl --destdir=\$(DESTDIR) $flags \$(INSTALLFLAGS) \$(STRIPFLAGS)
+ \$(RUN_PERL) installman --destdir=\$(DESTDIR) $flags
+EOT
+ fi
-install: install-all
+ test $name = notify || echo ' -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) -Ilib -MCPAN -e '\''@ARGV&&install(@ARGV)'\'' `cat extras.lst`' >>$Makefile
+done
+if test "X$hostperl" != X; then
+ $spitshell >>$Makefile <<'!NO!SUBS!'
install.perl: $(INSTALL_DEPENDENCE) installperl
- $(RUN_PERL) installperl --destdir=$(DESTDIR) $(INSTALLFLAGS) $(STRIPFLAGS)
+ $(HOST_PERL) installperl --destdir=$(DESTDIR) $(INSTALLFLAGS) $(STRIPFLAGS)
-@test ! -s extras.lst || $(MAKE) extras.install
install.man: all installman
+ $(HOST_PERL) installman --destdir=$(DESTDIR) $(INSTALLFLAGS)
+
+# XXX Experimental. Hardwired values, but useful for testing.
+# Eventually Configure could ask for some of these values.
+install.html: all installhtml
+ -@test -f README.vms && cd vms && $(LNS) ../README.vms README_vms.pod && cd ..
+ $(HOST_PERL) installhtml \
+ --podroot=. --podpath=. --recurse \
+ --htmldir=$(privlib)/html \
+ --htmlroot=$(privlib)/html \
+ --splithead=pod/perlipc \
+ --splititem=pod/perlfunc \
+ --ignore=Porting/Maintainers.pm,Porting/pumpkin.pod,Porting/repository.pod \
+ --verbose
+!NO!SUBS!
+else
+ $spitshell >>$Makefile <<'!NO!SUBS!'
+install.perl: $(INSTALL_DEPENDENCE) installperl
+ $(RUN_PERL) installperl --destdir=$(DESTDIR) $(INSTALLFLAGS) $(STRIPFLAGS)
+ -@test ! -s extras.lst || PATH="`pwd`:\${PATH}" PERL5LIB="`pwd`/lib" \$(RUN_PERL) -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst`
+
+install.man: all installman
$(RUN_PERL) installman --destdir=$(DESTDIR) $(INSTALLFLAGS)
# XXX Experimental. Hardwired values, but useful for testing.
--splititem=pod/perlfunc \
--ignore=Porting/Maintainers.pm,Porting/pumpkin.pod,Porting/repository.pod \
--verbose
+!NO!SUBS!
+fi
+$spitshell >>$Makefile <<'!NO!SUBS!'
# I now supply perly.c with the kits, so the following section is
# used only if you force bison to run by saying
regen_meta regen-meta: META.yml META.json
META.yml: FORCE
- PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) -Ilib Porting/makemeta -y
+ PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) Porting/makemeta -y
META.json: FORCE
- PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) -Ilib Porting/makemeta -j
+ PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) Porting/makemeta -j
regen_all regen-all: regen regen_meta
.PHONY: printconfig
printconfig:
- @eval `$(RUN_PERL) -Ilib -V:$(CONFIGVAR)`; echo $$$(CONFIGVAR)
+ @eval `$(RUN_PERL) -V:$(CONFIGVAR)`; echo $$$(CONFIGVAR)
.PHONY: clean _tidy _mopup _cleaner1 _cleaner2 \
realclean _realcleaner clobber _clobber \
@echo "Note that '$(MAKE) realclean' does not delete config.sh or Policy.sh"
_clobber:
- -@rm -f Cross/run-* Cross/to-* Cross/from-*
+ -@rm -f Cross/run-* Cross/to-* Cross/from-* Cross/mkdir
+ -rm -rf host
rm -f t/test_state
rm -f config.sh cppstdin Policy.sh extras.lst
_tidy:
-cd pod; $(LDLIBPTH) $(MAKE) clean
-cd utils; $(LDLIBPTH) $(MAKE) clean
- -cd x2p; $(LDLIBPTH) $(MAKE) clean
-rm -f lib/Config_git.pl git_version.h
-@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \
$(MINIPERL) make_ext.pl --target=clean $$x MAKE=$(MAKE) ; \
-cd os2; rm -f Makefile
-cd pod; $(LDLIBPTH) $(MAKE) $(CLEAN)
-cd utils; $(LDLIBPTH) $(MAKE) $(CLEAN)
- -cd x2p; $(LDLIBPTH) $(MAKE) $(CLEAN)
-@if test -f $(MINIPERL_EXE) ; then \
for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \
$(MINIPERL) make_ext.pl --target=$(CLEAN) $$x MAKE=$(MAKE) ; \
rm -f core *perl.core t/core t/*perl.core core.* t/core.*
rm -f t/$(PERL_EXE) t/rantests
rm -rf t/tmp*
- rm -f so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR)
rm -rf $(addedbyconf)
rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old makefile.old utils/Makefile
rm -f $(private)
rm -f h2ph.man pstruct
rm -rf .config
rm -f preload
- rm -rf lib/Encode lib/Compress lib/Hash lib/re
- rm -rf lib/TAP lib/Module/Pluggable lib/App
- rm -rf lib/mro
- rm -rf lib/IO/Compress lib/IO/Uncompress
- rm -f lib/ExtUtils/ParseXS/t/XSTest.c
- rm -f lib/ExtUtils/ParseXS/t/XSTest$(OBJ_EXT)
- rm -f lib/ExtUtils/ParseXS/t/XSTest$(DLSUFFIX)
- rm -fr lib/B
- rm -fr lib/CPAN
- rm -fr lib/ExtUtils/CBuilder
rm -f pod2htmd.tmp
rm -rf pod/perlfunc pod/perlipc
-rmdir ext/B/lib
- -rmdir lib/Archive/Tar lib/Archive lib/Attribute
- -rmdir lib/CGI lib/Carp
- -rmdir lib/Data lib/Devel lib/Digest
- -rmdir lib/ExtUtils/Command lib/ExtUtils/Constant lib/ExtUtils/Liblist lib/ExtUtils/MakeMaker
- -rmdir lib/File/Spec lib/Filter/Util lib/Filter
- -rmdir lib/I18N/LangTags lib/IO/Socket lib/IO lib/IPC
- -rmdir lib/List/Util lib/List
- -rmdir lib/Locale/Maketext lib/Locale
- -rmdir lib/Log/Message lib/Log
- -rmdir lib/Math/Big* lib/Math
- -rmdir lib/Memoize lib/MIME
- -rmdir lib/Module/Build/Platform lib/Module/Build lib/Module/Load lib/Module
- -rmdir lib/Net/FTP lib/Object
- -rmdir lib/Parse/CPAN lib/Parse
- -rmdir lib/PerlIO/via lib/PerlIO
- -rmdir lib/Package lib/Params
- -rmdir lib/Pod/Perldoc lib/Pod/Simple lib/Pod/Text
- -rmdir lib/Sys lib/Scalar/Util lib/Scalar
- -rmdir lib/Term/UI lib/Thread lib/Tie/Hash
- -rmdir lib/Test/Builder/Tester lib/Test/Builder lib/Test
- -rmdir lib/Unicode/Collate
- -rmdir lib/XS/APItest lib/XS
- -rmdir lib/inc/latest lib/inc
- -rmdir lib/autodie/exception lib/autodie lib/encoding lib/threads
- -rm -f lib/ExtUtils/CBuilder/t/libcompilet.dll.a
- -rm -f lib/ExtUtils/ParseXS/t/libXSTest.dll.a
+ rm -f so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR)
+ -rmdir lib/version lib/threads lib/encoding lib/autodie/exception
+ -rmdir lib/autodie/Scope lib/autodie lib/XS lib/Win32API lib/VMS
+ -rmdir lib/Unicode/Collate/Locale lib/Unicode/Collate/CJK
+ -rmdir lib/Unicode/Collate lib/Tie/Hash lib/Thread lib/Text
+ -rmdir lib/Test/Builder/Tester lib/Test/Builder lib/Test lib/Term
+ -rmdir lib/TAP/Parser/YAMLish lib/TAP/Parser/SourceHandler
+ -rmdir lib/TAP/Parser/Scheduler lib/TAP/Parser/Result
+ -rmdir lib/TAP/Parser/Iterator lib/TAP/Parser lib/TAP/Harness
+ -rmdir lib/TAP/Formatter/File lib/TAP/Formatter/Console
+ -rmdir lib/TAP/Formatter lib/TAP lib/Sys/Syslog lib/Sys lib/Search
+ -rmdir lib/Scalar lib/Pod/Text lib/Pod/Simple lib/Pod/Perldoc
+ -rmdir lib/PerlIO/via lib/PerlIO lib/Perl lib/Parse/CPAN lib/Parse
+ -rmdir lib/Params lib/Net/FTP lib/Module/Load lib/Module/CoreList
+ -rmdir lib/Module lib/Memoize lib/Math/BigInt lib/Math/BigFloat
+ -rmdir lib/Math lib/MIME lib/Locale/Maketext lib/Locale/Codes
+ -rmdir lib/Locale lib/List/Util lib/List lib/JSON/PP lib/JSON lib/IPC
+ -rmdir lib/IO/Uncompress/Adapter lib/IO/Uncompress lib/IO/Socket
+ -rmdir lib/IO/Compress/Zlib lib/IO/Compress/Zip lib/IO/Compress/Gzip
+ -rmdir lib/IO/Compress/Base lib/IO/Compress/Adapter lib/IO/Compress
+ -rmdir lib/IO lib/I18N/LangTags lib/I18N lib/Hash/Util lib/Hash
+ -rmdir lib/HTTP lib/Filter/Util lib/Filter lib/File/Spec
+ -rmdir lib/ExtUtils/Typemaps lib/ExtUtils/ParseXS
+ -rmdir lib/ExtUtils/MakeMaker lib/ExtUtils/Liblist
+ -rmdir lib/ExtUtils/Constant lib/ExtUtils/Command
+ -rmdir lib/ExtUtils/CBuilder/Platform/Windows
+ -rmdir lib/ExtUtils/CBuilder/Platform lib/ExtUtils/CBuilder
+ -rmdir lib/Exporter lib/Encode/Unicode lib/Encode/MIME/Header
+ -rmdir lib/Encode/MIME lib/Encode/KR lib/Encode/JP lib/Encode/CN
+ -rmdir lib/Encode lib/Digest lib/Devel lib/Data lib/Config/Perl
+ -rmdir lib/Compress/Raw lib/Compress lib/Carp lib/CPAN/Meta
+ -rmdir lib/CPAN/LWP lib/CPAN/Kwalify lib/CPAN/HTTP lib/CPAN/FTP
+ -rmdir lib/CPAN/Exception lib/CPAN/API lib/CPAN lib/Attribute
+ -rmdir lib/Archive/Tar lib/Archive lib/App/Prove/State/Result
+ -rmdir lib/App/Prove/State lib/App/Prove lib/App
_realcleaner:
@$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=distclean
# Architecture-neutral stuff:
test_prep_pre: preplibrary utilities $(nonxs_ext)
+!NO!SUBS!
+case "$targethost" in
+'') $spitshell >>$Makefile <<'!NO!SUBS!'
test_prep test-prep: test_prep_pre $(MINIPERL_EXE) $(unidatafiles) $(PERL_EXE) \
- $(dynamic_ext) $(TEST_PERL_DLL) runtests x2p/s2p x2p/find2perl \
- $(generated_pods)
+ $(dynamic_ext) $(TEST_PERL_DLL) runtests $(generated_pods)
cd t && (rm -f $(PERL_EXE); $(LNS) ../$(PERL_EXE) $(PERL_EXE))
+!NO!SUBS!
+;;
+*) $spitshell >>$Makefile <<!GROK!THIS!
+test_prep test-prep: test_prep_pre \$(MINIPERL_EXE) \$(unidatafiles) \$(PERL_EXE) \
+ \$(dynamic_ext) \$(TEST_PERL_DLL) runtests \
+ \$(generated_pods)
+ $to libperl.*
+ $to t/*
+ $to lib/*
+ $to TestInit.pm
+ $to win32/FindExt.pm
+ $to regen/*
+ $to pod/*
+ $to MANIFEST
+ $to Porting/*
+ $to cpan/*/t
+ $to dist/*/t
+ $to ext/*/t
+ $to cpan/Term-Cap/test.pl
+ $to cpan/Pod-Usage/*
+ $to cpan/Pod-Parser/*
+ $to cpan/IO-Compress/*
+ $to cpan/HTTP-Tiny/lib/*
+ $to cpan/Filter-Util-Call/filter-util.pl
+ $to cpan/Digest-MD5/*
+ $to cpan/Digest-SHA/*
+ $to cpan/Test-Simple/*
+ $to cpan/Pod-Parser/lib/*
+ $to cpan/Test-Harness/*
+ $to cpan/Scalar-List-Utils/*
+ $to ext/IPC-Open3/*
+ $to ext/Tie-Memoize/*
+ $to ext/POSIX/*
+ $to dist/IO/*
+# --- These three are needed by ExtUtils::MM_Unix to verify PERL_CORE
+ $to config_h.SH
+ $to perl.h
+ $to cflags
+ $to *.h
+# --- For t/TEST
+ $to config.sh
+# --- For lib/diagnostics.t with -Duseshrplib
+ $to \$(PERL_EXE)
+ cd t && (rm -f \$(PERL_EXE); \$(LNS) ../\$(PERL_EXE) \$(PERL_EXE)) && cd ..
+ $to t/\$(PERL_EXE)
+
+!GROK!THIS!
+;;
+esac
+
+$spitshell >>$Makefile <<'!NO!SUBS!'
test_prep_reonly: $(MINIPERL_EXE) $(PERL_EXE) $(dynamic_ext_re) $(TEST_PERL_DLL)
$(MINIPERL) make_ext.pl $(dynamic_ext_re) MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=dynamic
cd t && (rm -f $(PERL_EXE); $(LNS) ../$(PERL_EXE) $(PERL_EXE))
+!NO!SUBS!
+
+case "$targethost" in
+'') $spitshell >>$Makefile <<'!NO!SUBS!'
test check: test_prep
$(RUN_TESTS) choose
+!NO!SUBS!
+;;
+*) $spitshell >>$Makefile <<!GROK!THIS!
+
+test check: test_prep
+ $run -cwd $targetdir/t -env "$targetenv LD_LIBRARY_PATH=$targetdir:$targetdir/lib:$targetdir/lib/auto:\$\$LD_LIBRARY_PATH" ./TEST
+
+!GROK!THIS!
+;;
+esac
+
+$spitshell >>$Makefile <<'!NO!SUBS!'
test_tty test-tty: test_prep
$(RUN_TESTS) tty
@grep "^usemymalloc='n'" config.sh >/dev/null || exit 1
@echo "And of course you have to have valgrind..."
$(VALGRIND) $(VG_TEST) || exit 1
- PERL_VALGRIND=1 VALGRIND='$(VALGRIND)' $(RUN_TESTS) choose
+ PERL_VALGRIND=1 VALGRIND='$(VALGRIND)' TESTFILE=harness $(RUN_TESTS) choose
!NO!SUBS!
;;
esac
.PHONY: ok okfile oknack okfilenack nok nokfile noknack nokfilenack
ok: utilities
- $(RUN_PERL) -Ilib utils/perlbug -ok -s '(UNINSTALLED)'
+ $(RUN_PERL) utils/perlbug -ok -s '(UNINSTALLED)'
okfile: utilities
- $(RUN_PERL) -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok
+ $(RUN_PERL) utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok
oknack: utilities
- $(RUN_PERL) -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -A
+ $(RUN_PERL) utils/perlbug -ok -s '(UNINSTALLED)' -A
okfilenack: utilities
- $(RUN_PERL) -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok -A
+ $(RUN_PERL) utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok -A
nok: utilities
- $(RUN_PERL) -Ilib utils/perlbug -nok -s '(UNINSTALLED)'
+ $(RUN_PERL) utils/perlbug -nok -s '(UNINSTALLED)'
nokfile: utilities
- $(RUN_PERL) -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok
+ $(RUN_PERL) utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok
noknack: utilities
- $(RUN_PERL) -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -A
+ $(RUN_PERL) utils/perlbug -nok -s '(UNINSTALLED)' -A
nokfilenack: utilities
- $(RUN_PERL) -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok -A
+ $(RUN_PERL) utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok -A
.PHONY: clist hlist
echo "This is an EBCDIC system, checking if any parser files need regenerating." >&2
case "$osname" in
os390|posix-bc)
- if cd x2p
- then
- rm -f y.tab.c y.tab.h
- case "$osname" in
- posix-bc)
- # we are using two different yaccs in BS2000 Posix!
- byacc a2p.y >/dev/null 2>&1
- ;;
- *) # e.g. os390
- yacc a2p.y >/dev/null 2>&1
- ;;
- esac
- if cmp -s y.tab.c a2p.c
- then
- rm -f y.tab.c
- else
- echo "a2p.y -> a2p.c" >&2
- mv -f y.tab.c a2p.c
- chmod u+w a2p.c
- sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \
- -e 's|^static void __YY_YACC_MAIN.*BS2000.*|/*static main deleted*/|' \
- -e 's/y\.tab/a2p/g' a2p.c >a2p.tmp && mv a2p.tmp a2p.c
- xxx="$xxx a2p.c"
- fi
- # In case somebody yacc -d:ed the a2p.y.
- if test -f y.tab.h
- then
- if cmp -s y.tab.h a2p.h
- then
- rm -f y.tab.h
- else
- echo "a2p.h -> a2p.h" >&2
- mv -f y.tab.h a2p.h
- xxx="$xxx a2p.h"
- fi
- fi
- cd ..
- fi
;;
*)
echo "'$osname' is an EBCDIC system I don't know that well." >&4
https://perl5.git.perl.org / perl5.git / blobdiff