$ config_symbols1 ="|installprivlib|installscript|installsitearch|installsitelib|most|oldarchlib|oldarchlibexp|osname|pager|perl_symbol|perl_verb|"
$ config_symbols2 ="|prefix|privlib|privlibexp|scriptdir|sitearch|sitearchexp|sitebin|sitelib|sitelib_stem|sitelibexp|try_cxx|use64bitall|use64bitint|"
$ config_symbols3 ="|usecasesensitive|usedefaulttypes|usedevel|useieee|useithreads|uselongdouble|usemultiplicity|usemymalloc|usedebugging_perl|"
-$ config_symbols4 ="|useperlio|usesecurelog|usethreads|usevmsdebug|usefaststdio|usemallocwrap|unlink_all_versions|uselargefiles|usesitecustomize|"
+$ config_symbols4 ="|usesecurelog|usethreads|usevmsdebug|usefaststdio|usemallocwrap|unlink_all_versions|uselargefiles|usesitecustomize|"
$ config_symbols5 ="|buildmake|builder|usethreadupcalls|usekernelthreads|useshortenedsymbols"
$!
$ open/read CONFIG 'config_sh'
$ GOSUB myread
$ use_debugging_perl = ans
$!
-$! Ask if they want to build with MULTIPLICITY
-$ echo ""
-$ echo "Perl can be built so that multiple Perl interpreters can coexist"
-$ echo "within the same Perl executable."
-$ echo "There is some performance overhead, however, so you"
-$ echo "probably do not want to choose this unless you are going to be"
-$ echo "doing things with embedded perl."
-$ bool_dflt = "n"
-$ if f$type(usemultiplicity) .nes. ""
-$ then
-$ if usemultiplicity .or. usemultiplicity .eqs. "define" then bool_dflt = "y"
-$ endif
-$ rp = "Build Perl for multiplicity? [''bool_dflt'] "
-$ GOSUB myread
-$ IF ans
-$ THEN
-$ usemultiplicity="define"
-$ ELSE
-$ usemultiplicity="undef"
-$ ENDIF
-$!
-$! Ask if they want to build with 64-bit support
-$ IF (F$ELEMENT(0, "-", archname).NES."VMS_VAX").and.("''f$extract(1,3, f$getsyi(""version""))'".ges."7.1")
-$ THEN
-$ bool_dflt = "n"
-$ IF F$TYPE(use64bitint) .NES. ""
-$ THEN
-$ IF use64bitint .OR. use64bitint .eqs. "define" THEN bool_dflt = "y"
-$ ENDIF
-$ echo ""
-$ echo "You have natively 64-bit long integers."
-$ echo ""
-$ echo "Perl can be built to take advantage of 64-bit integer types"
-$ echo "on some systems, To do so, Configure can be run with -Duse64bitint."
-$ echo "Choosing this option will most probably introduce binary incompatibilities."
-$ echo ""
-$ echo "If this does not make any sense to you, just accept the default '" + bool_dflt + "'."
-$ rp = "Try to use 64-bit integers, if available? [''bool_dflt'] "
-$ GOSUB myread
-$ use64bitint = ans
-$!
-$ bool_dflt = "n"
-$ IF F$TYPE(use64bitall) .NES. ""
-$ THEN
-$ IF use64bitall .OR. use64bitall .eqs. "define" THEN bool_dflt = "y"
-$ ENDIF
-$ echo ""
-$ echo "You may also choose to try maximal 64-bitness. It means using as much"
-$ echo "64-bitness as possible on the platform. This in turn means even more"
-$ echo "binary incompatibilities. On the other hand, your platform may not"
-$ echo "have any more 64-bitness available than what you already have chosen."
-$ echo ""
-$ echo "If this does not make any sense to you, just accept the default '" + bool_dflt + "'."
-$ rp = "Try to use maximal 64-bit support, if available? [''bool_dflt'] "
-$ GOSUB myread
-$ use64bitall=ans
-$ IF use64bitall .AND. .NOT. use64bitint
-$ THEN
-$ echo ""
-$ echo "Since you have chosen a maximally 64-bit build, I'm also turning on"
-$ echo "the use of 64-bit integers."
-$ use64bitint="Y"
-$ ENDIF
-$!
-$ bool_dflt = use64bitall
-$ IF F$TYPE(uselargefiles) .NES. ""
-$ THEN
-$ IF uselargefiles .OR. uselargefiles .eqs. "define" THEN bool_dflt = "y"
-$ ENDIF
-$ echo ""
-$ echo "Perl can be built to understand large files (files larger than 2 gigabytes)"
-$ echo "on some systems. To do so, Configure can be run with -Duselargefiles."
-$ echo ""
-$ echo "If this does not make any sense to you, just accept the default '" + bool_dflt + "'."
-$ rp = "Try to understand large files, if available? [''bool_dflt'] "
-$ GOSUB myread
-$ uselargefiles=ans
-$!
-$ bool_dflt = "n"
-$ IF F$TYPE(uselongdouble) .NES. ""
-$ THEN
-$ IF uselongdouble .OR. uselongdouble .eqs. "define" THEN bool_dflt = "y"
-$ ENDIF
-$ echo ""
-$ echo "Perl can be built to take advantage of long doubles which"
-$ echo "(if available) may give more accuracy and range for floating point numbers."
-$ echo ""
-$ echo "If this does not make any sense to you, just accept the default '" + bool_dflt + "'."
-$ rp = "Try to use long doubles, if available? [''bool_dflt'] "
-$ GOSUB myread
-$ uselongdouble = ans
-$!
-$ ENDIF ! not VAX && >= 7.1
-$!
-$ IF usesitecustomize .OR. usesitecustomize .eqs. "define"
-$ THEN
-$ usesitecustomize = "define"
-$ ELSE
-$ usesitecustomize = "undef"
-$ ENDIF
$!
$! Ask about threads, if appropriate
$ IF ccname .EQS. "DEC" .OR. ccname .EQS. "CXX"
$ GOSUB myread
$ if ans
$ THEN
+$ usethreads = "define"
$ use_threads="T"
$ ! Shall we do the 5.005-type threads, or IThreads?
$ echo "Since release 5.6, Perl has had two different threading implementations,"
$ then
$ if use5005threads .or. use5005threads .eqs. "define" then bool_dflt="n"
$ endif
-$ rp = "Use the newer intepreter-based ithreads? [''bool_dflt'] "
+$ rp = "Use the newer interpreter-based ithreads? [''bool_dflt'] "
$ GOSUB myread
$ use_ithreads=ans
$ if use_ithreads
$ ENDIF
$ ENDIF
$ ENDIF
+$ ELSE
+$ usethreads = "undef"
$ ENDIF
$ ENDIF
$ IF F$TYPE(usethreadupcalls) .EQS. "" THEN usethreadupcalls = "undef"
$ IF F$TYPE(usekernelthreads) .EQS. "" THEN usekernelthreads = "undef"
+$!
+$! Ask if they want to build with MULTIPLICITY
+$ echo ""
+$ echo "Perl can be built so that multiple Perl interpreters can coexist"
+$ echo "within the same Perl executable."
+$ IF usethreads .OR. usethreads .EQS. "define"
+$ THEN
+$ echo "This multiple interpreter support is required for interpreter-based threads."
+$ usemultiplicity="define"
+$ ELSE
+$ bool_dflt = "n"
+$ if f$type(usemultiplicity) .nes. ""
+$ then
+$ if usemultiplicity .or. usemultiplicity .eqs. "define" then bool_dflt = "y"
+$ endif
+$ rp = "Build Perl for multiplicity? [''bool_dflt'] "
+$ GOSUB myread
+$ IF ans
+$ THEN
+$ usemultiplicity="define"
+$ ELSE
+$ usemultiplicity="undef"
+$ ENDIF
+$ ENDIF
+$!
+$! Ask if they want to build with 64-bit support
+$ IF (F$ELEMENT(0, "-", archname).NES."VMS_VAX").and.("''f$extract(1,3, f$getsyi(""version""))'".ges."7.1")
+$ THEN
+$ bool_dflt = "n"
+$ IF F$TYPE(use64bitint) .NES. ""
+$ THEN
+$ IF use64bitint .OR. use64bitint .eqs. "define" THEN bool_dflt = "y"
+$ ENDIF
+$ echo ""
+$ echo "You have natively 64-bit long integers."
+$ echo ""
+$ echo "Perl can be built to take advantage of 64-bit integer types"
+$ echo "on some systems, To do so, Configure can be run with -Duse64bitint."
+$ echo "Choosing this option will most probably introduce binary incompatibilities."
+$ echo ""
+$ echo "If this does not make any sense to you, just accept the default '" + bool_dflt + "'."
+$ rp = "Try to use 64-bit integers, if available? [''bool_dflt'] "
+$ GOSUB myread
+$ use64bitint = ans
+$!
+$ bool_dflt = "n"
+$ IF F$TYPE(use64bitall) .NES. ""
+$ THEN
+$ IF use64bitall .OR. use64bitall .eqs. "define" THEN bool_dflt = "y"
+$ ENDIF
+$ echo ""
+$ echo "You may also choose to try maximal 64-bitness. It means using as much"
+$ echo "64-bitness as possible on the platform. This in turn means even more"
+$ echo "binary incompatibilities. On the other hand, your platform may not"
+$ echo "have any more 64-bitness available than what you already have chosen."
+$ echo ""
+$ echo "If this does not make any sense to you, just accept the default '" + bool_dflt + "'."
+$ rp = "Try to use maximal 64-bit support, if available? [''bool_dflt'] "
+$ GOSUB myread
+$ use64bitall=ans
+$ IF use64bitall .AND. .NOT. use64bitint
+$ THEN
+$ echo ""
+$ echo "Since you have chosen a maximally 64-bit build, I'm also turning on"
+$ echo "the use of 64-bit integers."
+$ use64bitint="Y"
+$ ENDIF
+$!
+$ bool_dflt = use64bitall
+$ IF F$TYPE(uselargefiles) .NES. ""
+$ THEN
+$ IF uselargefiles .OR. uselargefiles .eqs. "define" THEN bool_dflt = "y"
+$ ENDIF
+$ echo ""
+$ echo "Perl can be built to understand large files (files larger than 2 gigabytes)"
+$ echo "on some systems. To do so, Configure can be run with -Duselargefiles."
+$ echo ""
+$ echo "If this does not make any sense to you, just accept the default '" + bool_dflt + "'."
+$ rp = "Try to understand large files, if available? [''bool_dflt'] "
+$ GOSUB myread
+$ uselargefiles=ans
+$!
+$ bool_dflt = "n"
+$ IF F$TYPE(uselongdouble) .NES. ""
+$ THEN
+$ IF uselongdouble .OR. uselongdouble .eqs. "define" THEN bool_dflt = "y"
+$ ENDIF
+$ echo ""
+$ echo "Perl can be built to take advantage of long doubles which"
+$ echo "(if available) may give more accuracy and range for floating point numbers."
+$ echo ""
+$ echo "If this does not make any sense to you, just accept the default '" + bool_dflt + "'."
+$ rp = "Try to use long doubles, if available? [''bool_dflt'] "
+$ GOSUB myread
+$ uselongdouble = ans
+$!
+$ ENDIF ! not VAX && >= 7.1
+$!
+$ IF usesitecustomize .OR. usesitecustomize .eqs. "define"
+$ THEN
+$ usesitecustomize = "define"
+$ ELSE
+$ usesitecustomize = "undef"
+$ ENDIF
+$!
$! Case sensitive?
$ echo ""
$ echo "By default, perl (and pretty much everything else on VMS) uses"
$ echo4 "I'll go with ''archname' anyway..."
$ ENDIF
$ ENDIF
+$!
+$ IF usethreads .OR. usethreads .EQS. "define"
+$ THEN
+$ echo4 "Threads selected."
+$ IF F$LOCATE("-thread", archname) .EQ. F$LENGTH(archname)
+$ THEN
+$ archname = "''archname'-thread"
+$ echo4 "...setting architecture name to ''archname'."
+$ ELSE
+$ echo4 "...and architecture name already has -thread."
+$ ENDIF
+$ ENDIF
+$!
+$ IF usemultiplicity .OR. usemultiplicity .EQS. "define"
+$ THEN
+$ echo4 "Multiplicity selected."
+$ IF F$LOCATE("-multi", archname) .EQ. F$LENGTH(archname)
+$ THEN
+$ archname = "''archname'-multi"
+$ echo4 "...setting architecture name to ''archname'."
+$ ELSE
+$ echo4 "...and architecture name already has -multi."
+$ ENDIF
+$ ENDIF
+$!
+$ IF uselongdouble .OR. uselongdouble .EQS. "define"
+$ THEN
+$ echo4 "Long doubles selected."
+$ IF F$LOCATE("-ld", archname) .EQ. F$LENGTH(archname)
+$ THEN
+$ archname = "''archname'-ld"
+$ echo4 "...setting architecture name to ''archname'."
+$ ELSE
+$ echo4 "...and architecture name already has -ld."
+$ ENDIF
+$ ENDIF
+$!
$ bool_dflt = "n"
$ vms_prefix = "perl_root"
$ vms_prefixup = F$EDIT(vms_prefix,"UPCASE")
$ ENDIF
$ ENDIF
$!
-$! PerlIO abstraction
-$!
-$ bool_dflt = "y"
-$ IF F$TYPE(useperlio) .NES. ""
-$ then
-$ if .not. useperlio .or. useperlio .eqs. "undef" then bool_dflt = "n"
-$ endif
-$ IF .NOT. silent
-$ THEN
-$ echo "Previous versions of ''package' used the standard IO mechanisms as"
-$ TYPE SYS$INPUT:
-$ DECK
-defined in <stdio.h>. Versions 5.003_02 and later of perl allow
-alternate IO mechanisms via the PerlIO abstraction layer, but the
-stdio mechanism is still available if needed. The abstraction layer
-can use AT&T's sfio (if you already have sfio installed) or regular stdio.
-Using PerlIO with sfio may cause problems with some extension modules.
-
-$ EOD
-$ echo "If this does not make any sense to you, just accept the default '" + bool_dflt + "'."
-$ ENDIF
-$ rp = "Use the PerlIO abstraction layer? [''bool_dflt'] "
-$ GOSUB myread
-$ IF ans
-$ THEN
-$ useperlio = "define"
-$ ELSE
-$ echo "Ok, doing things the stdio way."
-$ useperlio = "undef"
-$ ENDIF
-$!
$ echo ""
$ echo4 "Checking the C run-time library."
$!
$ uselongdouble = "define"
$ alignbytes="16"
$ nveformat="""Le"""
+$ nvEUformat="""LE"""
$ nvfformat="""Lf"""
+$ nvFUformat="""LF"""
$ nvgformat="""Lg"""
+$ nvGUformat="""LG"""
$ ELSE
$ uselongdouble = "undef"
$ nveformat="""e"""
+$ nvEUformat="""E"""
$ nvfformat="""f"""
+$ nvFUformat="""F"""
$ nvgformat="""g"""
+$ nvGUformat="""G"""
$ ENDIF
$ IF use64bitall .OR. use64bitall .EQS. "define"
$ THEN
$ IF F$ELEMENT(0, "-", archname) .NES. "VMS_VAX"
$ THEN
$ d_PRId64 = "define"
+$ d_PRIi64 = "define"
$ d_PRIu64 = "define"
$ d_PRIo64 = "define"
$ d_PRIx64 = "define"
$ d_modflproto = "define"
$ ELSE
$ d_PRId64 = "undef"
+$ d_PRIi64 = "undef"
$ d_PRIXU64 = "undef"
$ d_PRIu64 = "undef"
$ d_PRIo64 = "undef"
$ THEN
$ IF use_5005_threads
$ THEN
-$ arch = "''arch'-thread"
-$ archname = "''archname'-thread"
$ d_old_pthread_create_joinable = "undef"
$ old_pthread_create_joinable = " "
$ use5005threads = "define"
$ useithreads = "undef"
$ ELSE
-$ arch = "''arch'-ithread"
-$ archname = "''archname'-ithread"
$ d_old_pthread_create_joinable = "undef"
$ old_pthread_create_joinable = " "
$ use5005threads = "undef"
$! ELSE dflt = "n"
$! ENDIF
$! echo "''package' can use the sfio library, but it is experimental."
-$! IF useperlio .EQS. "undef"
-$! THEN
-$! echo "For sfio also the PerlIO abstraction layer is needed."
-$! echo "Earlier you said you would not want that."
-$! ENDIF
$! rp="You seem to have sfio available, do you want to try using it? [''dflt'] "
$! GOSUB myread
$! IF ans .EQS. "" THEN ans = dflt
$! IF ans
$! THEN
-$! echo "Ok, turning on both sfio and PerlIO, then."
-$! useperlio="define"
+$! echo "Ok, turning on sfio then."
$! val="define"
$! ELSE
$! echo "Ok, avoiding sfio this time. I'll use stdio instead."
$ uselargefiles = "undef"
$ ENDIF
$!
+$! Check for st_ino size.
+$!
+$ st_ino_size = 4
+$ OS
+$ WS "#include <sys/stat.h>"
+$ WS "#include <stdio.h>"
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>
+$ WS "#endif"
+$ WS "int main() {
+$ WS "#''uselargefiles' _LARGEFILE"
+$ WS "#ifdef _LARGEFILE"
+$ WS " printf(""%d\n"", sizeof(__ino64_t));"
+$ WS "#else"
+$ WS " printf(""%d\n"", sizeof(unsigned short)*3);"
+$ WS "#endif"
+$ WS " exit(0);"
+$ WS "}"
+$ CS
+$ GOSUB link_ok
+$ IF link_status .EQ. good_link
+$ THEN
+$ GOSUB just_mcr_it
+$ st_ino_size = tmp
+$ ENDIF
+$ echo "Your st_ino size is ''st_ino_size' bytes."
+$!
$! Tests for hard link, symbolic links, and 7.3 + CRTL features
$!
$ d_lchown = "undef"
$ WC "_o='" + obj_ext + "'"
$ WC "alignbytes='" + alignbytes + "'"
$ WC "aphostname='write sys$output f$edit(f$getsyi(\""SCSNODE\""),\""TRIM,LOWERCASE\"")'"
+$ WC "api_revision='" + api_revision + "'"
+$ WC "api_subversion='" + api_subversion + "'"
+$ WC "api_version='" + api_version + "'"
+$ WC "api_versionstring='" + version + "'"
$ WC "ar='" + "'"
$ WC "archlib='" + archlib + "'"
$ WC "archlibexp='" + archlibexp + "'"
$ ELSE
$ WC "d_Gconvert='my_gconvert(x,n,t,b)'"
$ ENDIF
-$ WC "d_PRIEldbl='" + d_PRIEUldbl + "'"
-$ WC "d_PRIFldbl='" + d_PRIFUldbl + "'"
-$ WC "d_PRIGldbl='" + d_PRIGUldbl + "'"
+$ WC "d_PRIEUldbl='" + d_PRIEUldbl + "'"
+$ WC "d_PRIFUldbl='" + d_PRIFUldbl + "'"
+$ WC "d_PRIGUldbl='" + d_PRIGUldbl + "'"
$ WC "d_PRIXU64='" + d_PRIXU64 + "'"
$ WC "d_PRId64='" + d_PRId64 + "'"
$ WC "d_PRIeldbl='" + d_PRIeldbl + "'"
$ WC "d_PRIfldbl='" + d_PRIfldbl + "'"
$ WC "d_PRIgldbl='" + d_PRIgldbl + "'"
+$ WC "d_PRIi64='" + d_PRIi64 + "'"
$ WC "d_PRIo64='" + d_PRIo64 + "'"
$ WC "d_PRIu64='" + d_PRIu64 + "'"
$ WC "d_PRIx64='" + d_PRIx64 + "'"
$ WC "netdb_net_type='" + netdb_net_type + "'"
$ WC/symbol "nonxs_ext='", nonxs_ext, " ", nonxs_ext2, "'"
$ WC "nveformat='" + nveformat + "'"
+$ WC "nvEUformat='" + nvEUformat + "'"
$ WC "nvfformat='" + nvfformat + "'"
+$ WC "nvFUformat='" + nvFUformat + "'"
$ WC "nvgformat='" + nvgformat + "'"
+$ WC "nvGUformat='" + nvGUformat + "'"
$ WC "nvsize='" + nvsize + "'"
$ WC "nvtype='" + nvtype + "'"
$ WC "o_nonblock=' '"
$ WC "sLOCALTIME_max='4294967295'"
$ WC "sLOCALTIME_min='0'"
$ WC "sPRId64='" + sPRId64 + "'"
-$ WC "sPRIEldbl='" + sPRIEUldbl + "'"
-$ WC "sPRIFldbl='" + sPRIFUldbl + "'"
-$ WC "sPRIGldbl='" + sPRIGUldbl + "'"
-$ WC "sPRIX64='" + sPRIXU64 + "'"
+$ WC "sPRIEUldbl='" + sPRIEUldbl + "'"
+$ WC "sPRIFUldbl='" + sPRIFUldbl + "'"
+$ WC "sPRIGUldbl='" + sPRIGUldbl + "'"
+$ WC "sPRIXU64='" + sPRIXU64 + "'"
$ WC "sPRIeldbl='" + sPRIeldbl + "'"
$ WC "sPRIfldbl='" + sPRIfldbl + "'"
$ WC "sPRIgldbl='" + sPRIgldbl + "'"
-$! WC "sPRIi64='" + sPRIi64 + "'"
+$ WC "sPRIi64='" + sPRIi64 + "'"
$ WC "sPRIo64='" + sPRIo64 + "'"
$ WC "sPRIu64='" + sPRIu64 + "'"
$ WC "sPRIx64='" + sPRIx64 + "'"
$ WC "ssizetype='int'"
$ WC "startperl=" + startperl ! This one's special--no enclosing single quotes
$ WC "static_ext='" + static_ext + "'"
+$ WC "st_ino_size='" + st_ino_size + "'"
+$ WC "st_ino_sign='1'"
$ WC "stdchar='" + stdchar + "'"
$ WC "stdio_base='((*fp)->_base)'"
$ WC "stdio_bufsiz='((*fp)->_cnt + (*fp)->_ptr - (*fp)->_base)'"
$ WC "usemorebits='" + usemorebits + "'"
$ WC "usemultiplicity='" + usemultiplicity + "'"
$ WC "usemymalloc='" + usemymalloc + "'"
-$ WC "useperlio='" + useperlio + "'"
+$ WC "useperlio='define'"
$ WC "useposix='false'"
$ WC "usereentrant='undef'"
$ WC "userelocatableinc='undef'"
$! FIXME: "-" is an operator and illegal in a symbol name -- cpanp-run-perl can't work
$!$ WRITE CONFIG "$ cpanp-run-perl == """ + perl_setup_perl + " ''vms_prefix':[utils]cpanp-run-perl.com"""
$ WRITE CONFIG "$ cpanp == """ + perl_setup_perl + " ''vms_prefix':[utils]cpanp.com"""
-$ IF F$LOCATE("Devel::DProf",dynamic_ext) .LT. F$LENGTH(dynamic_ext)
-$ THEN
-$ WRITE CONFIG "$ dprofpp == """ + perl_setup_perl + " ''vms_prefix':[utils]dprofpp.com"""
-$ ENDIF
$ WRITE CONFIG "$ enc2xs == """ + perl_setup_perl + " ''vms_prefix':[utils]enc2xs.com"""
$ WRITE CONFIG "$ find2perl == """ + perl_setup_perl + " ''vms_prefix':[utils]find2perl.com"""
$ WRITE CONFIG "$ h2ph == """ + perl_setup_perl + " ''vms_prefix':[utils]h2ph.com"""
https://perl5.git.perl.org / perl5.git / blobdiff