#define __attribute__(_arg_)
#endif
-/* HAS_BCMP:
- * This symbol is defined if the bcmp() routine is available to
- * compare blocks of memory.
- */
-#define HAS_BCMP /**/
-
-/* HAS_BCOPY:
- * This symbol is defined if the bcopy() routine is available to
- * copy blocks of memory.
- */
-#define HAS_BCOPY /**/
-
-/* HAS_BZERO:
- * This symbol is defined if the bzero() routine is available to
- * set a memory block to 0.
- */
-#define HAS_BZERO /**/
-
/* HAS_CHOWN:
* This symbol, if defined, indicates that the chown routine is
* available.
*/
/*#define HAS_CHSIZE / **/
-/* HASCONST:
- * This symbol, if defined, indicates that this C compiler knows about
- * the const type. There is no need to actually test for that symbol
- * within your programs. The mere use of the "const" keyword will
- * trigger the necessary tests.
- */
-#define HASCONST /**/
-#ifndef HASCONST
-#define const
-#endif
-
/* HAS_CUSERID:
* This symbol, if defined, indicates that the cuserid routine is
* available to get character login names.
*/
#define HAS_CUSERID /**/
-/* HAS_DBL_DIG:
- * This symbol, if defined, indicates that this system's <float.h>
- * or <limits.h> defines the symbol DBL_DIG, which is the number
- * of significant digits in a double precision number. If this
- * symbol is not defined, a guess of 15 is usually pretty good.
- */
-#define HAS_DBL_DIG /* */
-
/* HAS_DIFFTIME:
* This symbol, if defined, indicates that the difftime routine is
* available.
*/
#define HAS_MBTOWC /**/
-/* HAS_MEMCMP:
- * This symbol, if defined, indicates that the memcmp routine is available
- * to compare blocks of memory.
- */
-#define HAS_MEMCMP /**/
-
-/* HAS_MEMCPY:
- * This symbol, if defined, indicates that the memcpy routine is available
- * to copy blocks of memory.
- */
-#define HAS_MEMCPY /**/
-
-/* HAS_MEMMOVE:
- * This symbol, if defined, indicates that the memmove routine is available
- * to copy potentially overlapping blocks of memory. This should be used
- * only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your
- * own version.
- */
-#define HAS_MEMMOVE /**/
-
-/* HAS_MEMSET:
- * This symbol, if defined, indicates that the memset routine is available
- * to set blocks of memory.
- */
-#define HAS_MEMSET /**/
-
/* HAS_MKDIR:
* This symbol, if defined, indicates that the mkdir routine is available
* to create directories. Otherwise you should fork off a new process to
*/
#define HAS_SETSID /**/
-/* HAS_STRCHR:
- * This symbol is defined to indicate that the strchr()/strrchr()
- * functions are available for string searching. If not, try the
- * index()/rindex() pair.
- */
-/* HAS_INDEX:
- * This symbol is defined to indicate that the index()/rindex()
- * functions are available for string searching.
- */
-#define HAS_STRCHR /**/
-/*#define HAS_INDEX / **/
-
/* HAS_STRCOLL:
* This symbol, if defined, indicates that the strcoll routine is
* available to compare strings using collating information.
*/
#define HAS_STRCOLL /**/
-/* USE_STRUCT_COPY:
- * This symbol, if defined, indicates that this C compiler knows how
- * to copy structures. If undefined, you'll need to use a block copy
- * routine of some sort instead.
- */
-#define USE_STRUCT_COPY /**/
-
/* HAS_STRTOD:
* This symbol, if defined, indicates that the strtod routine is
* available to provide better numeric string conversion than atof().
*/
/*#define HAS_USLEEP / **/
-/* HASVOLATILE:
- * This symbol, if defined, indicates that this C compiler knows about
- * the volatile declaration.
- */
-#define HASVOLATILE /**/
-#ifndef HASVOLATILE
-#define volatile
-#endif
-
/* HAS_WAIT4:
* This symbol, if defined, indicates that wait4() exists.
*/
*/
#define I_FCNTL /**/
-/* I_FLOAT:
- * This symbol, if defined, indicates to the C program that it should
- * include <float.h> to get definition of symbols like DBL_MAX or
- * DBL_MIN, i.e. machine dependent floating point values.
- */
-#define I_FLOAT /**/
-
-/* I_LIMITS:
- * This symbol, if defined, indicates to the C program that it should
- * include <limits.h> to get definition of symbols like WORD_BIT or
- * LONG_MAX, i.e. machine dependant limitations.
- */
-#define I_LIMITS /**/
-
/* I_LOCALE:
* This symbol, if defined, indicates to the C program that it should
* include <locale.h>.
*/
#define I_LOCALE /**/
-/* I_MATH:
- * This symbol, if defined, indicates to the C program that it should
- * include <math.h>.
- */
-#define I_MATH /**/
-
-/* I_MEMORY:
- * This symbol, if defined, indicates to the C program that it should
- * include <memory.h>.
- */
-/*#define I_MEMORY / **/
-
/* I_NET_ERRNO:
* This symbol, if defined, indicates that <net/errno.h> exists and
* should be included.
*/
#define I_NETINET_IN /**/
-/* I_SFIO:
- * This symbol, if defined, indicates to the C program that it should
- * include <sfio.h>.
- */
-/*#define I_SFIO / **/
-
-/* I_STDDEF:
- * This symbol, if defined, indicates that <stddef.h> exists and should
- * be included.
- */
-#define I_STDDEF /**/
-
-/* I_STDLIB:
- * This symbol, if defined, indicates that <stdlib.h> exists and should
- * be included.
- */
-#define I_STDLIB /**/
-
-/* I_STRING:
- * This symbol, if defined, indicates to the C program that it should
- * include <string.h> (USG systems) instead of <strings.h> (BSD systems).
- */
-#define I_STRING /**/
-
/* I_SYS_DIR:
* This symbol, if defined, indicates to the C program that it should
* include <sys/dir.h>.
*/
#define I_UTIME /**/
-/* I_VALUES:
- * This symbol, if defined, indicates to the C program that it should
- * include <values.h> to get definition of symbols like MINFLOAT or
- * MAXLONG, i.e. machine dependant limitations. Probably, you
- * should use <limits.h> instead, if it is available.
- */
-/*#define I_VALUES / **/
-
/* I_VFORK:
* This symbol, if defined, indicates to the C program that it should
* include vfork.h.
/* HAS_QUAD:
* This symbol, if defined, tells that there's a 64-bit integer type,
- * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one
+ * Quad_t, and its unsigned counterpart, Uquad_t. QUADKIND will be one
* of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T.
*/
#define HAS_QUAD /**/
* double, or a long double when applicable. Usual values are 2,
* 4 and 8. The default is eight, for safety.
*/
-#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH)
+#if defined(MULTIARCH)
# define MEM_ALIGNBYTES 8
#else
#define MEM_ALIGNBYTES 4
* so the default case (for NeXT) is big endian to catch them.
* This might matter for NeXT 3.0.
*/
-#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH)
+#if defined(MULTIARCH)
# ifdef __LITTLE_ENDIAN__
# if LONGSIZE == 4
# define BYTEORDER 0x1234
/* HAS_GETESPWNAM:
* This symbol, if defined, indicates that the getespwnam system call is
- * available to retrieve enchanced (shadow) password entries by name.
+ * available to retrieve enhanced (shadow) password entries by name.
*/
/*#define HAS_GETESPWNAM / **/
* This symbol, if defined, indicates that the localtime_r routine
* is available to localtime re-entrantly.
*/
+/* LOCALTIME_R_NEEDS_TZSET:
+ * Many libc's localtime_r implementations do not call tzset,
+ * making them differ from localtime(), and making timezone
+ * changes using $ENV{TZ} without explicitly calling tzset
+ * impossible. This symbol makes us call tzset before localtime_r
+ */
/* LOCALTIME_R_PROTO:
* This symbol encodes the prototype of localtime_r.
* It is zero if d_localtime_r is undef, and one of the
* is defined.
*/
/*#define HAS_LOCALTIME_R / **/
+/*#define LOCALTIME_R_NEEDS_TZSET / **/
#define LOCALTIME_R_PROTO 0 /**/
/* HAS_LONG_DOUBLE:
*/
/*#define HAS_MADVISE / **/
-/* HAS_MEMCHR:
- * This symbol, if defined, indicates that the memchr routine is available
- * to locate characters within a C string.
- */
-#define HAS_MEMCHR /**/
-
/* HAS_MKDTEMP:
* This symbol, if defined, indicates that the mkdtemp routine is
* available to exclusively create a uniquely named temporary directory.
/* HAS_MKSTEMPS:
* This symbol, if defined, indicates that the mkstemps routine is
- * available to excluslvely create and open a uniquely named
+ * available to exclusively create and open a uniquely named
* (with a suffix) temporary file.
*/
/*#define HAS_MKSTEMPS / **/
* available to split a long double x into a fractional part f and
* an integer part i such that |f| < 1.0 and (f + i) = x.
*/
-/* HAS_MODFL_POW32_BUG:
- * This symbol, if defined, indicates that the modfl routine is
- * broken for long doubles >= pow(2, 32).
- * For example from 4294967303.150000 one would get 4294967302.000000
- * and 1.150000. The bug has been seen in certain versions of glibc,
- * release 2.2.2 is known to be okay.
- */
/*#define HAS_MODFL / **/
-/*#define HAS_MODFL_POW32_BUG / **/
/* HAS_MPROTECT:
* This symbol, if defined, indicates that the mprotect system call is
*/
/*#define HAS_RECVMSG / **/
-/* HAS_SAFE_BCOPY:
- * This symbol, if defined, indicates that the bcopy routine is available
- * to copy potentially overlapping memory blocks. Normally, you should
- * probably use memmove() or memcpy(). If neither is defined, roll your
- * own version.
- */
-/*#define HAS_SAFE_BCOPY / **/
-
-/* HAS_SAFE_MEMCPY:
- * This symbol, if defined, indicates that the memcpy routine is available
- * to copy potentially overlapping memory blocks. If you need to
- * copy overlapping memory blocks, you should check HAS_MEMMOVE and
- * use memmove() instead, if available.
- */
-/*#define HAS_SAFE_MEMCPY / **/
-
-/* HAS_SANE_MEMCMP:
- * This symbol, if defined, indicates that the memcmp routine is available
- * and can be used to compare relative magnitudes of chars with their high
- * bits set. If it is not defined, roll your own version.
- */
-#define HAS_SANE_MEMCMP /**/
-
/* HAS_SBRK_PROTO:
* This symbol, if defined, indicates that the system provides
* a prototype for the sbrk() function. Otherwise, it is up
*/
#define HAS_SETVBUF /**/
-/* USE_SFIO:
- * This symbol, if defined, indicates that sfio should
- * be used.
- */
-/*#define USE_SFIO / **/
-
/* HAS_SHM:
* This symbol, if defined, indicates that the entire shm*(2) library is
* supported.
* This symbol, if defined, indicates that the BSD socketpair() call is
* supported.
*/
-/* HAS_MSG_CTRUNC:
- * This symbol, if defined, indicates that the MSG_CTRUNC is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
-/* HAS_MSG_DONTROUTE:
- * This symbol, if defined, indicates that the MSG_DONTROUTE is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
-/* HAS_MSG_OOB:
- * This symbol, if defined, indicates that the MSG_OOB is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
-/* HAS_MSG_PEEK:
- * This symbol, if defined, indicates that the MSG_PEEK is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
-/* HAS_MSG_PROXY:
- * This symbol, if defined, indicates that the MSG_PROXY is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
-/* HAS_SCM_RIGHTS:
- * This symbol, if defined, indicates that the SCM_RIGHTS is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
#define HAS_SOCKET /**/
#define HAS_SOCKETPAIR /**/
-/*#define HAS_MSG_CTRUNC / **/
-/*#define HAS_MSG_DONTROUTE / **/
-/*#define HAS_MSG_OOB / **/
-/*#define HAS_MSG_PEEK / **/
-/*#define HAS_MSG_PROXY / **/
-/*#define HAS_SCM_RIGHTS / **/
/* HAS_SOCKS5_INIT:
* This symbol, if defined, indicates that the socks5_init routine is
#define FILE_bufsiz(fp) ((fp)->_cnt + (fp)->_ptr - (fp)->_base)
#endif
-/* HAS_STRERROR:
- * This symbol, if defined, indicates that the strerror routine is
- * available to translate error numbers to strings. See the writeup
- * of Strerror() in this file before you try to define your own.
- */
/* HAS_SYS_ERRLIST:
* This symbol, if defined, indicates that the sys_errlist array is
* available to translate error numbers to strings. The extern int
* sys_nerr gives the size of that table.
*/
-/* Strerror:
- * This preprocessor symbol is defined as a macro if strerror() is
- * not available to translate error numbers to strings but sys_errlist[]
- * array is there.
- */
-#define HAS_STRERROR /**/
#define HAS_SYS_ERRLIST /**/
-#define Strerror(e) strerror(e)
/* HAS_STRERROR_R:
* This symbol, if defined, indicates that the strerror_r routine
*/
#define Signal_t void /* Signal handler's return type */
-/* HAS_VPRINTF:
- * This symbol, if defined, indicates that the vprintf routine is available
- * to printf with a pointer to an argument list. If unavailable, you
- * may need to write your own, probably in terms of _doprnt().
- */
-/* USE_CHAR_VSPRINTF:
- * This symbol is defined if this system has vsprintf() returning type
- * (char*). The trend seems to be to declare it as "int vsprintf()". It
- * is up to the package author to declare vsprintf correctly based on the
- * symbol.
- */
-#define HAS_VPRINTF /**/
-#define USE_CHAR_VSPRINTF /**/
-
/* HAS_WRITEV:
* This symbol, if defined, indicates that the writev routine is
* available to do scatter writes.
* unsigned long, int, etc. It may be necessary to include
* <sys/types.h> to get any typedef'ed information.
*/
-#define Size_t size_t /* length paramater for string functions */
+#define Size_t size_t /* length parameter for string functions */
/* Sock_size_t:
* This symbol holds the type used for the size argument of
/*#define PERL_VENDORLIB_EXP "" / **/
/*#define PERL_VENDORLIB_STEM "" / **/
-/* VOIDFLAGS:
- * This symbol indicates how much support of the void type is given by this
- * compiler. What various bits mean:
- *
- * 1 = supports declaration of void
- * 2 = supports arrays of pointers to functions returning void
- * 4 = supports comparisons between pointers to void functions and
- * addresses of void functions
- * 8 = suports declaration of generic void pointers
- *
- * The package designer should define VOIDUSED to indicate the requirements
- * of the package. This can be done either by #defining VOIDUSED before
- * including config.h, or by defining defvoidused in Myinit.U. If the
- * latter approach is taken, only those flags will be tested. If the
- * level of void support necessary is not present, defines void to int.
- */
-#ifndef VOIDUSED
-#define VOIDUSED 15
-#endif
-#define VOIDFLAGS 15
-#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
-#define void int /* is void to be avoided? */
-#define M_VOID /* Xenix strikes again */
-#endif
-
-/* PERL_XS_APIVERSION:
- * This variable contains the version of the oldest perl binary
- * compatible with the present perl. perl.c:incpush() and
- * lib/lib.pm will automatically search in /sys/lib/perl/5.8.0/site_perl/386 for older
- * directories across major versions back to xs_apiversion.
- * This is only useful if you have a perl library directory tree
- * structured like the default one.
- * See INSTALL for how this works.
- * The versioned site_perl directory was introduced in 5.005,
- * so that is the lowest possible value.
- * Since this can depend on compile time options
- * it is set by Configure. Other non-default sources
- * of potential incompatibility, such as multiplicity, threads,
- * debugging, 64bits, sfio, etc., are not checked for currently,
- * though in principle we could go snooping around in old
- * Config.pm files.
- */
-/* PERL_PM_APIVERSION:
- * This variable contains the version of the oldest perl
- * compatible with the present perl. (That is, pure perl modules
- * written for pm_apiversion will still work for the current
- * version). perl.c:incpush() and lib/lib.pm will automatically
- * search in /sys/lib/perl/5.8.0/site_perl for older directories across major versions
- * back to pm_apiversion. This is only useful if you have a perl
- * library directory tree structured like the default one. The
- * versioned site_perl library was introduced in 5.005, so that's
- * the default setting for this variable. It's hard to imagine
- * it changing before Perl6. It is included here for symmetry
- * with xs_apiveprsion -- the searching algorithms will
- * (presumably) be similar.
- * See the INSTALL file for how this works.
- */
-#define PERL_XS_APIVERSION "5.8.0"
-#define PERL_PM_APIVERSION "5.005"
-
/* HAS_CRYPT:
* This symbol, if defined, indicates that the crypt routine is available
* to encrypt passwords and the like.
*/
/*#define I_NDBM / **/
-/* I_STDARG:
- * This symbol, if defined, indicates that <stdarg.h> exists and should
- * be included.
- */
-/* I_VARARGS:
- * This symbol, if defined, indicates to the C program that it should
- * include <varargs.h>.
- */
-#define I_STDARG /**/
-/*#define I_VARARGS / **/
-
-/* CAN_PROTOTYPE:
- * If defined, this macro indicates that the C compiler can handle
- * function prototypes.
- */
-/* _:
- * This macro is used to declare function parameters for folks who want
- * to make declarations with prototypes using a different style than
- * the above macros. Use double parentheses. For example:
- *
- * int main _((int argc, char *argv[]));
- */
-#define CAN_PROTOTYPE /**/
-#ifdef CAN_PROTOTYPE
-#define _(args) args
-#else
-#define _(args) ()
-#endif
-
/* SH_PATH:
* This symbol contains the full pathname to the shell used on this
* on this system to execute Bourne shell scripts. Usually, this will be
*/
/*#define HAS_COPYSIGNL /**/
+/* USE_CPLUSPLUS:
+ * This symbol, if defined, indicates that a C++ compiler was
+ * used to compiled Perl and will be used to compile extensions.
+ */
+/*#define USE_CPLUSPLUS /**/
+
/* HAS_DBMINIT_PROTO:
* This symbol, if defined, indicates that the system provides
* a prototype for the dbminit() function. Otherwise, it is up
#define PROCSELFEXE_PATH /**/
#endif
+/* HAS_PTHREAD_ATTR_SETSCOPE:
+ * This symbol, if defined, indicates that the pthread_attr_setscope
+ * system call is available to set the contention scope attribute of
+ * a thread attribute object.
+ */
+/*#define HAS_PTHREAD_ATTR_SETSCOPE / **/
+
/* HAS_SIGPROCMASK:
* This symbol, if defined, indicates that the sigprocmask
* system call is available to examine or change the signal mask
*/
#define HAS_STRFTIME /**/
+/* HAS_STRLCAT
+ * This symbol, if defined, indicates that the strlcat routine is
+ * available to do string concatenation.
+ */
+/*#define HAS_STRLCAT /**/
+
+/* HAS_STRLCPY:
+ * This symbol, if defined, indicates that the strlcpy routine is
+ * available to do string copying.
+ */
+/*#define HAS_STRLCPY /**/
+
/* HAS_SYSCALL_PROTO:
* This symbol, if defined, indicates that the system provides
* a prototype for the syscall() function. Otherwise, it is up
/* HAS_PTHREAD_ATFORK:
* This symbol, if defined, indicates that the pthread_atfork routine
- * is available setup fork handlers.
+ * is available to setup fork handlers.
*/
/*#define HAS_PTHREAD_ATFORK / **/
https://perl5.git.perl.org / perl5.git / blobdiff