2 # Makefile to build perl on Windows using DMAKE.
4 # Microsoft Visual C++ 6.0 or later
5 # Borland C++ 5.02 or later
6 # MinGW with gcc-3.2 or later
7 # Windows SDK 64-bit compiler and tools
9 # This is set up to build a perl.exe that runs off a shared library
10 # (perl513.dll). Also makes individual DLLs for the XS extensions.
14 ## Make sure you read README.win32 *before* you mess with anything here!
18 ## Build configuration. Edit the values below to suit your needs.
22 # Set these to wherever you want "dmake install" to put your
26 INST_TOP *= $(INST_DRV)\perl
29 # Uncomment if you want to build a 32-bit Perl using a 32-bit compiler
30 # on a 64-bit version of Windows.
34 # Comment this out if you DON'T want your perl installation to be versioned.
35 # This means that the new installation will overwrite any files from the
36 # old installation at the same INST_TOP location. Leaving it enabled is
37 # the safest route, as perl adds the extra version directory to all the
38 # locations it installs files to. If you disable it, an alternative
39 # versioned installation can be obtained by setting INST_TOP above to a
40 # path that includes an arbitrary version string.
45 # Comment this out if you DON'T want your perl installation to have
46 # architecture specific components. This means that architecture-
47 # specific files will be installed along with the architecture-neutral
48 # files. Leaving it enabled is safer and more flexible, in case you
49 # want to build multiple flavors of perl and install them together in
50 # the same location. Commenting it out gives you a simpler
51 # installation that is easier to understand for beginners.
53 #INST_ARCH *= \$(ARCHNAME)
56 # Uncomment this if you want perl to run
57 # $Config{sitelibexp}\sitecustomize.pl
58 # before anything else. This script can then be set up, for example,
59 # to add additional entries to @INC.
61 #USE_SITECUST *= define
64 # uncomment to enable multiple interpreters. This is need for fork()
65 # emulation and for thread support.
70 # Interpreter cloning/threads; now reasonably complete.
71 # This should be enabled to get the fork() emulation.
72 # This needs USE_MULTI above.
74 USE_ITHREADS *= define
77 # uncomment to enable the implicit "host" layer for all system calls
78 # made by perl. This needs USE_MULTI above.
79 # This is also needed to get fork().
84 # Comment out next assign to disable perl's I/O subsystem and use compiler's
85 # stdio for IO - depending on your compiler vendor and run time library you may
86 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
87 # You will also be unable to take full advantage of perl5.8's support for multiple
88 # encodings and may see lower IO performance. You have been warned.
92 # Comment this out if you don't want to enable large file support for
93 # some reason. Should normally only be changed to maintain compatibility
94 # with an older release of perl.
95 USE_LARGE_FILES *= define
98 # uncomment exactly one of the following
100 # Visual C++ 6.x (aka Visual C++ 98)
102 # Visual C++ Toolkit 2003 (aka Visual C++ 7.x) (free command-line tools)
103 #CCTYPE *= MSVC70FREE
104 # Visual C++ .NET 2003 (aka Visual C++ 7.x) (full version)
106 # Windows Server 2003 SP1 Platform SDK (April 2005)
108 # Visual C++ 2005 Express Edition (aka Visual C++ 8.x) (free version)
109 #CCTYPE *= MSVC80FREE
110 # Visual C++ 2005 (aka Visual C++ 8.x) (full version)
112 # Visual C++ 2008 Express Edition (aka Visual C++ 9.x) (free version)
113 #CCTYPE *= MSVC90FREE
114 # Visual C++ 2008 (aka Visual C++ 9.x) (full version)
116 # Visual C++ 2010 Express Edition (aka Visual C++ 10.x) (free version)
117 #CCTYPE = MSVC100FREE
118 # Visual C++ 2010 (aka Visual C++ 10.x) (full version)
120 # Borland 5.02 or later
122 # MinGW or mingw-w64 with gcc-3.2 or later
126 # uncomment this if your Borland compiler is older than v5.4.
129 # uncomment this if you want to use Borland's VCL as your CRT
133 # uncomment this if you are compiling under Windows 95/98 and command.com
134 # (not needed if you're running under 4DOS/NT 6.01 or later)
138 # uncomment next line if you want debug version of perl (big,slow)
139 # If not enabled, we automatically try to use maximum optimization
140 # with all compilers that are known to have a working optimizer.
145 # uncomment to enable linking with setargv.obj under the Visual C
146 # compiler. Setting this options enables perl to expand wildcards in
147 # arguments, but it may be harder to use alternate methods like
148 # File::DosGlob that are more powerful. This option is supported only with
151 #USE_SETARGV *= define
154 # set this if you wish to use perl's malloc
155 # WARNING: Turning this on/off WILL break binary compatibility with extensions
156 # you may have compiled with/without it. Be prepared to recompile all
157 # extensions if you change the default. Currently, this cannot be enabled
158 # if you ask for USE_IMP_SYS above.
160 #PERL_MALLOC *= define
163 # set this to enable debugging mstats
164 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
165 # be enabled without PERL_MALLOC as well.
167 #DEBUG_MSTATS *= define
170 # set this to additionally provide a statically linked perl-static.exe.
171 # Note that dynamic loading will not work with this perl, so you must
172 # include required modules statically using the STATIC_EXT or ALL_STATIC
173 # variables below. A static library perl513s.lib will also be created.
174 # Ordinary perl.exe is not affected by this option.
176 #BUILD_STATIC *= define
179 # in addition to BUILD_STATIC the option ALL_STATIC makes *every*
180 # extension get statically built
181 # This will result in a very large perl executable, but the main purpose
182 # is to have proper linking set so as to be able to create miscellaneous
183 # executables with different built-in extensions
185 #ALL_STATIC *= define
188 # set the install locations of the compiler include/libraries
189 # Running VCVARS32.BAT is *required* when using Visual C.
190 # Some versions of Visual C don't define MSVCDIR in the environment,
191 # so you may have to set CCHOME explicitly (spaces in the path name should
194 .IF "$(CCTYPE)" == "BORLAND"
195 CCHOME *= C:\Borland\BCC55
196 .ELIF "$(CCTYPE)" == "GCC"
203 # If building with gcc-4.x.x (or x86_64-w64-mingw32-gcc-4.x.x), then
204 # uncomment the following assignment to GCC_4XX, make sure that CCHOME
205 # has been set correctly above, and uncomment the appropriate
207 # The name of the dll can change, depending upon which vendor has supplied
208 # your 4.x.x compiler, and upon the values of "x".
209 # (The dll will be in your mingw/bin folder, so check there if you're
210 # unsure about the correct name.)
211 # Without these corrections, the op/taint.t test script will fail.
214 #GCCHELPERDLL *= $(CCHOME)\bin\libgcc_s_sjlj-1.dll
215 #GCCHELPERDLL *= $(CCHOME)\bin\libgcc_s_dw2-1.dll
216 #GCCHELPERDLL *= $(CCHOME)\bin\libgcc_s_1.dll
219 # uncomment this if you are using x86_64-w64-mingw32 cross-compiler
220 # ie if your gcc executable is called 'x86_64-w64-mingw32-gcc'
221 # instead of the usual 'gcc'.
226 # Following sets $Config{incpath} and $Config{libpth}
229 .IF "$(GCCCROSS)" == "define"
230 CCINCDIR *= $(CCHOME)\mingw\include
231 CCLIBDIR *= $(CCHOME)\mingw\lib
233 CCINCDIR *= $(CCHOME)\include
234 CCLIBDIR *= $(CCHOME)\lib
238 # Additional compiler flags can be specified here.
240 BUILDOPT *= $(BUILDOPTEXTRA)
243 # This should normally be disabled. Enabling it will disable the File::Glob
244 # implementation of CORE::glob.
246 #BUILDOPT += -DPERL_EXTERNAL_GLOB
249 # This should normally be disabled. Enabling it causes perl to read scripts
250 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
252 #BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
255 # specify semicolon-separated list of extra directories that modules will
256 # look for libraries (spaces in path names need not be quoted)
261 # set this to point to cmd.exe (only needed if you use some
262 # alternate shell that doesn't grok cmd.exe style commands)
264 #SHELL *= g:\winnt\system32\cmd.exe
267 # set this to your email address (perl will guess a value from
268 # from your loginname and your hostname, which may not be right)
273 ## Build configuration ends.
276 ##################### CHANGE THESE ONLY IF YOU MUST #####################
279 DEBUG_MSTATS *= undef
281 USE_SITECUST *= undef
283 USE_ITHREADS *= undef
286 USE_LARGE_FILES *= undef
288 .IF "$(USE_IMP_SYS)" == "define"
292 .IF "$(PERL_MALLOC)" == "undef"
296 .IF "$(DEBUG_MSTATS)" == "define"
297 BUILDOPT += -DPERL_DEBUGGING_MSTATS
300 .IF "$(USE_IMP_SYS) $(USE_MULTI)" == "define undef"
304 .IF "$(USE_ITHREADS) $(USE_MULTI)" == "define undef"
308 .IF "$(USE_SITECUST)" == "define"
309 BUILDOPT += -DUSE_SITECUSTOMIZE
312 .IF "$(USE_MULTI)" != "undef"
313 BUILDOPT += -DPERL_IMPLICIT_CONTEXT
316 .IF "$(USE_IMP_SYS)" != "undef"
317 BUILDOPT += -DPERL_IMPLICIT_SYS
320 .IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432 WIN64
322 PROCESSOR_ARCHITECTURE *= x86
325 # When we are running from a 32bit cmd.exe on AMD64 then
326 # PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432
328 .IF "$(PROCESSOR_ARCHITEW6432)" != ""
329 PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
331 .ELIF "$(PROCESSOR_ARCHITECTURE)" == "AMD64" || "$(PROCESSOR_ARCHITECTURE)" == "IA64"
338 # Treat 64-bit MSVC60 (doesn't really exist) as SDK2003SP1 because
339 # both link against MSVCRT.dll (which is part of Windows itself) and
340 # not against a compiler specific versioned runtime.
341 .IF "$(WIN64)" == "define" && "$(CCTYPE)" == "MSVC60"
345 ARCHITECTURE = $(PROCESSOR_ARCHITECTURE)
346 .IF "$(ARCHITECTURE)" == "AMD64"
349 .IF "$(ARCHITECTURE)" == "IA64"
353 .IF "$(USE_MULTI)" == "define"
354 ARCHNAME = MSWin32-$(ARCHITECTURE)-multi
356 .IF "$(USE_PERLIO)" == "define"
357 ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio
359 ARCHNAME = MSWin32-$(ARCHITECTURE)
363 .IF "$(USE_ITHREADS)" == "define"
364 ARCHNAME !:= $(ARCHNAME)-thread
367 # Visual C++ 98, .NET 2003, 2005/2008/2010 specific.
368 # VC++ 6/7/8/9/10.x can load DLLs on demand. Makes the test suite run
369 # in about 10% less time. (The free version of 7.x can't do this, but the free
370 # versions of 8/9/10.x can.)
371 .IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70" || \
372 "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
373 "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE" || \
374 "$(CCTYPE)" == "MSVC100" || "$(CCTYPE)" == "MSVC100FREE"
375 DELAYLOAD *= -DELAYLOAD:ws2_32.dll delayimp.lib
378 # Visual C++ 2005 and 2008 (VC++ 8.x and 9.x) create manifest files for EXEs and
379 # DLLs. These either need copying everywhere with the binaries, or else need
380 # embedding in them otherwise MSVCR80.dll or MSVCR90.dll won't be found. For
381 # simplicity, embed them if they exist (and delete them afterwards so that they
382 # don't get installed too).
383 EMBED_EXE_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1 && \
384 if exist $@.manifest del $@.manifest
385 EMBED_DLL_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2 && \
386 if exist $@.manifest del $@.manifest
388 ARCHDIR = ..\lib\$(ARCHNAME)
389 COREDIR = ..\lib\CORE
390 AUTODIR = ..\lib\auto
396 EXTUTILSDIR = $(LIBDIR)\ExtUtils
400 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
401 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
402 INST_LIB = $(INST_TOP)$(INST_VER)\lib
403 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
404 INST_COREDIR = $(INST_ARCHLIB)\CORE
405 INST_HTML = $(INST_TOP)$(INST_VER)\html
408 # Programs to compile, build .lib files and link
413 .IF "$(CCTYPE)" == "BORLAND"
416 .IF "$(BCCOLD)" != "define"
421 LIB32 = tlib /a /P128
428 INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
429 #PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
431 LOCDEFS = -DPERLDLL -DPERL_CORE
437 # same libs as MSVC, except Borland doesn't have oldnames.lib
439 kernel32.lib user32.lib gdi32.lib winspool.lib \
440 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
441 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
442 version.lib odbc32.lib odbccp32.lib comctl32.lib \
445 .IF "$(CFG)" == "Debug"
446 OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
449 OPTIMIZE = -O2 -D_RTLDLL
454 CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
455 $(PCHFLAGS) $(OPTIMIZE)
456 LINK_FLAGS = $(LINK_DBG) -x -L"$(INST_COREDIR)" -L"$(CCLIBDIR)" \
461 .IF "$(BCCOLD)" != "define"
463 DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
465 .IF "$(BCCVCL)" == "define"
466 LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
467 LINK_FLAGS += -L"$(CCLIBDIR)\Release"
471 .ELIF "$(CCTYPE)" == "GCC"
473 .IF "$(GCCCROSS)" == "define"
474 ARCHPREFIX = x86_64-w64-mingw32-
477 CC = $(ARCHPREFIX)gcc
478 LINK32 = $(ARCHPREFIX)g++
479 LIB32 = $(ARCHPREFIX)ar rc
480 IMPLIB = $(ARCHPREFIX)dlltool
481 RSC = $(ARCHPREFIX)windres
491 INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
493 .IF "$(WIN64)" == "define"
494 DEFINES += -DWIN64 -DCONSERVATIVE
496 LOCDEFS = -DPERLDLL -DPERL_CORE
500 # Current releases of MinGW 5.1.4 (as of 11-Aug-2009) will fail to link
501 # correctly if -lmsvcrt is specified explicitly.
507 -lmoldname -lkernel32 -luser32 -lgdi32 \
508 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
509 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \
510 -lwinmm -lversion -lodbc32 -lodbccp32 -lcomctl32
512 .IF "$(CFG)" == "Debug"
513 OPTIMIZE = -g -O2 -DDEBUGGING
521 CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
522 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
527 BUILDOPT += -fno-strict-aliasing -mms-bitfields
533 LIB32 = $(LINK32) -lib
540 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
541 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
542 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT
543 LOCDEFS = -DPERLDLL -DPERL_CORE
549 .IF "$(CFG)" == "Debug"
550 OPTIMIZE = -Od -MD -Zi -DDEBUGGING
553 OPTIMIZE = -MD -Zi -DNDEBUG
554 # we enable debug symbols in release builds also
555 LINK_DBG = -debug -opt:ref,icf
556 # you may want to enable this if you want COFF symbols in the executables
557 # in addition to the PDB symbols. The default Dr. Watson that ships with
558 # Windows can use the the former but not latter. The free WinDbg can be
559 # installed to get better stack traces from just the PDB symbols, so we
560 # avoid the bloat of COFF symbols by default.
561 #LINK_DBG = $(LINK_DBG) -debugtype:both
562 .IF "$(WIN64)" == "define"
563 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
567 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
573 .IF "$(WIN64)" == "define"
574 DEFINES += -DWIN64 -DCONSERVATIVE
575 OPTIMIZE += -fp:precise
578 # For now, silence VC++ 8/9/10.x's warnings about "unsafe" CRT functions
579 # and POSIX CRT function names being deprecated.
580 .IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
581 "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE" || \
582 "$(CCTYPE)" == "MSVC100" || "$(CCTYPE)" == "MSVC100FREE"
583 DEFINES += -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE
586 # In VS 2005 (VC++ 8.0) Microsoft changes time_t from 32-bit to
587 # 64-bit, even in 32-bit mode. It also provides the _USE_32BIT_TIME_T
588 # preprocessor option to revert back to the old functionality for
589 # backward compatibility. We define this symbol here for older 32-bit
590 # compilers only (which aren't using it at all) for the sole purpose
591 # of getting it into $Config{ccflags}. That way if someone builds
592 # Perl itself with e.g. VC6 but later installs an XS module using VC8
593 # the time_t types will still be compatible.
594 .IF "$(WIN64)" == "undef"
595 .IF "$(CCTYPE)" == "MSVC60" || \
596 "$(CCTYPE)" == "MSVC70" || "$(CCTYPE)" == "MSVC70FREE"
597 BUILDOPT += -D_USE_32BIT_TIME_T
602 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
603 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
604 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
605 version.lib odbc32.lib odbccp32.lib comctl32.lib
607 # The 64 bit Windows Server 2003 SP1 SDK compilers link against MSVCRT.dll, which
608 # doesn't include the buffer overrun verification code used by the /GS switch.
609 # Since the code links against libraries that are compiled with /GS, this
610 # "security cookie verification" code must be included via bufferoverflow.lib.
611 .IF "$(WIN64)" == "define" && "$(CCTYPE)" == "SDK2003SP1"
612 LIBBASEFILES += bufferoverflowU.lib
615 LIBFILES = $(LIBBASEFILES) $(LIBC)
617 EXTRACFLAGS = -nologo -GF -W3
618 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
619 $(PCHFLAGS) $(OPTIMIZE)
620 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
621 -libpath:"$(INST_COREDIR)" \
622 -machine:$(PROCESSOR_ARCHITECTURE)
630 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
632 .IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
633 "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE" || \
634 "$(CCTYPE)" == "MSVC100" || "$(CCTYPE)" == "MSVC100FREE"
635 LINK_FLAGS += "/manifestdependency:type='Win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' processorArchitecture='*' publicKeyToken='6595b64144ccf1df' language='*'"
637 RSC_FLAGS = -DINCLUDE_MANIFEST
641 # used to allow local linking flags that are not propogated into Config.pm,
645 BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
647 #################### do not edit below this line #######################
648 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
650 # Some old dmakes (including Sarathy's one at
651 # http://search.cpan.org/CPAN/authors/id/G/GS/GSAR/dmake-4.1pl1-win32.zip)
652 # don't support logical OR (||) or logical AND (&&) in conditional
653 # expressions and hence don't process this makefile correctly. Determine
654 # whether this is the case so that we can give the user an error message.
671 .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
674 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
677 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
683 .IF "$(CCTYPE)" == "BORLAND"
684 $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
685 $(IMPLIB) $(*B).lib $@
686 .ELIF "$(CCTYPE)" == "GCC"
687 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
688 $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
690 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
691 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
696 .IF "$(CCTYPE)" == "GCC"
697 $(RSC) --use-temp-file --include-dir=. --include-dir=.. -O COFF -D INCLUDE_MANIFEST -i $< -o $@
699 $(RSC) -i.. -DINCLUDE_MANIFEST $<
704 MINIPERL = ..\miniperl.exe
706 PERLEXE = ..\perl.exe
707 WPERLEXE = ..\wperl.exe
708 PERLEXESTATIC = ..\perl-static.exe
709 GLOBEXE = ..\perlglob.exe
710 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
711 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
713 GENUUDMAP = ..\generate_uudmap.exe
714 .IF "$(BUILD_STATIC)" == "define"
720 # Unicode data files generated by mktables
721 UNIDATAFILES = ..\lib\unicore\Decomposition.pl ..\lib\unicore\TestProp.pl \
722 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
723 ..\lib\unicore\Heavy.pl ..\lib\unicore\mktables.lst
725 # Directories of Unicode data files generated by mktables
726 UNIDATADIR1 = ..\lib\unicore\To
727 UNIDATADIR2 = ..\lib\unicore\lib
729 PERLEXE_MANIFEST= .\perlexe.manifest
730 PERLEXE_ICO = .\perlexe.ico
731 PERLEXE_RES = .\perlexe.res
734 # Nominate a target which causes extensions to be re-built
735 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
736 # on and really only the interface - i.e. the .def file used to export symbols
738 PERLDEP = perldll.def
741 PL2BAT = bin\pl2bat.pl
742 GLOBBAT = bin\perlglob.bat
758 ..\utils\config_data \
766 ..\utils\cpanp-run-perl \
780 .IF "$(CCTYPE)" == "BORLAND"
782 CFGSH_TMPL = config.bc
783 CFGH_TMPL = config_H.bc
785 .ELIF "$(CCTYPE)" == "GCC"
787 .IF "$(WIN64)" == "define"
788 .IF "$(GCCCROSS)" == "define"
789 CFGSH_TMPL = config.gc64
790 CFGH_TMPL = config_H.gc64
792 CFGSH_TMPL = config.gc64nox
793 CFGH_TMPL = config_H.gc64nox
796 CFGSH_TMPL = config.gc
797 CFGH_TMPL = config_H.gc
799 PERLIMPLIB = ..\libperl513$(a)
800 PERLSTATICLIB = ..\libperl513s$(a)
804 .IF "$(WIN64)" == "define"
805 CFGSH_TMPL = config.vc64
806 CFGH_TMPL = config_H.vc64
808 CFGSH_TMPL = config.vc
809 CFGH_TMPL = config_H.vc
814 # makedef.pl must be updated if this changes, and this should normally
815 # only change when there is an incompatible revision of the public API.
816 PERLIMPLIB *= ..\perl513$(a)
817 PERLSTATICLIB *= ..\perl513s$(a)
818 PERLDLL = ..\perl513.dll
820 XCOPY = xcopy /f /r /i /d /y
821 RCOPY = xcopy /f /r /i /e /d /y
861 EXTRACORE_SRC += perllib.c
863 .IF "$(PERL_MALLOC)" == "define"
864 EXTRACORE_SRC += ..\malloc.c
867 EXTRACORE_SRC += ..\perlio.c
875 # We need this for miniperl build unless we override canned
876 # config.h #define building mini\*
877 #.IF "$(USE_PERLIO)" == "define"
878 WIN32_SRC += .\win32io.c
925 .\include\sys\socket.h \
928 CORE_H = $(CORE_NOCFG_H) .\config.h ..\git_version.h
930 UUDMAP_H = ..\uudmap.h
931 BITCOUNT_H = ..\bitcount.h
933 MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
934 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
935 WIN32_OBJ = $(WIN32_SRC:db:+$(o))
936 MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
937 MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
938 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
939 DLL_OBJ = $(DYNALOADER)
940 X2P_OBJ = $(X2P_SRC:db:+$(o))
941 GENUUDMAP_OBJ = $(GENUUDMAP:db:+$(o))
943 PERLDLL_OBJ = $(CORE_OBJ)
944 PERLEXE_OBJ = perlmain$(o)
945 PERLEXEST_OBJ = perlmainst$(o)
947 PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
949 .IF "$(USE_SETARGV)" != ""
950 SETARGV_OBJ = setargv$(o)
953 .IF "$(ALL_STATIC)" == "define"
954 # some exclusions, unfortunately, until fixed:
955 # - Win32 extension contains overlapped symbols with win32.c (BUG!)
956 # - MakeMaker isn't capable enough for SDBM_File (smaller bug)
957 # - Encode (encoding search algorithm relies on shared library?)
958 STATIC_EXT = * !Win32 !SDBM_File !Encode
960 # specify static extensions here, for example:
961 #STATIC_EXT = Cwd Compress/Raw/Zlib
962 STATIC_EXT = Win32CORE
965 DYNALOADER = ..\DynaLoader$(o)
967 # vars must be separated by "\t+~\t+", since we're using the tempfile
968 # version of config_sh.pl (we were overflowing someone's buffer by
969 # trying to fit them all on the command line)
972 INST_DRV=$(INST_DRV) ~ \
973 INST_TOP=$(INST_TOP) ~ \
974 INST_VER=$(INST_VER) ~ \
975 INST_ARCH=$(INST_ARCH) ~ \
976 archname=$(ARCHNAME) ~ \
979 ccflags=$(EXTRACFLAGS) $(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
980 cf_email=$(EMAIL) ~ \
981 d_mymalloc=$(PERL_MALLOC) ~ \
982 libs=$(LIBFILES:f) ~ \
983 incpath=$(CCINCDIR) ~ \
984 libperl=$(PERLIMPLIB:f) ~ \
985 libpth=$(CCLIBDIR);$(EXTRALIBDIRS) ~ \
992 static_ext=$(STATIC_EXT) ~ \
993 usethreads=$(USE_ITHREADS) ~ \
994 useithreads=$(USE_ITHREADS) ~ \
995 usemultiplicity=$(USE_MULTI) ~ \
996 useperlio=$(USE_PERLIO) ~ \
997 uselargefiles=$(USE_LARGE_FILES) ~ \
998 usesitecustomize=$(USE_SITECUST) ~ \
999 LINK_FLAGS=$(LINK_FLAGS) ~ \
1000 optimize=$(OPTIMIZE)
1003 # set up targets varying between Win95 and WinNT builds
1006 .IF "$(IS_WIN95)" == "define"
1008 RIGHTMAKE = __switch_makefiles
1014 .IMPORT .IGNORE : SystemRoot windir
1016 # Don't just .IMPORT OS from the environment because dmake sets OS itself.
1017 ENV_OS=$(subst,OS=, $(shell @set OS))
1019 .IF "$(ENV_OS)" == "Windows_NT"
1020 ODBCCP32_DLL = $(SystemRoot)\system32\odbccp32.dll
1022 ODBCCP32_DLL = $(windir)\system\odbccp32.dll
1025 ICWD = -I..\dist\Cwd -I..\dist\Cwd\lib
1031 all : CHECKDMAKE .\config.h ..\git_version.h $(GLOBEXE) $(MINIPERL) $(MK2) \
1032 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) MakePPPort \
1033 $(PERLEXE) $(X2P) Extensions Extensions_nonxs $(PERLSTATIC)
1035 regnodes : ..\regnodes.h
1037 ..\regcomp$(o) : ..\regnodes.h ..\regcharclass.h
1039 ..\regexec$(o) : ..\regnodes.h ..\regcharclass.h
1041 reonly : regnodes .\config.h ..\git_version.h $(GLOBEXE) $(MINIPERL) $(MK2) \
1042 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
1043 $(X2P) Extensions_reonly
1045 static: $(PERLEXESTATIC)
1047 #----------------------------------------------------------------
1049 #-------------------- BEGIN Win95 SPECIFIC ----------------------
1051 # this target is a jump-off point for Win95
1052 # 1. it switches to the Win95-specific makefile if it exists
1053 # (__do_switch_makefiles)
1054 # 2. it prints a message when the Win95-specific one finishes (__done)
1055 # 3. it then kills this makefile by trying to make __no_such_target
1057 __switch_makefiles: __do_switch_makefiles __done __no_such_target
1059 __do_switch_makefiles:
1060 .IF "$(NOTFIRST)" != "true"
1061 if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
1066 .IF "$(NOTFIRST)" != "true"
1068 @echo Build process complete. Ignore any errors after this message.
1069 @echo Run "dmake test" to test and "dmake install" to install
1072 # dummy targets for Win95-specific makefile
1082 # This target is used to generate the new makefile (.\makefile.95) for Win95
1084 .\makefile.95: .\makefile.mk
1085 $(MINIPERL) genmk95.pl makefile.mk $(MK2)
1087 #--------------------- END Win95 SPECIFIC ---------------------
1089 # a blank target for when builds don't need to do certain things
1090 # this target added for Win95 port but used to keep the WinNT port able to
1096 .IF "$(NEWDMAKE)" == "define"
1099 @echo Your dmake doesn't support ^|^| or ^&^& in conditional expressions.
1100 @echo Please get the latest dmake from http://search.cpan.org/dist/dmake/
1104 $(GLOBEXE) : perlglob$(o)
1105 .IF "$(CCTYPE)" == "BORLAND"
1106 $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
1107 $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
1108 "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
1109 .ELIF "$(CCTYPE)" == "GCC"
1110 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
1112 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
1113 perlglob$(o) setargv$(o)
1117 perlglob$(o) : perlglob.c
1119 config.w32 : $(CFGSH_TMPL)
1120 copy $(CFGSH_TMPL) config.w32
1122 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
1124 copy $(CFGH_TMPL) config.h
1126 ..\git_version.h : $(MINIPERL) ..\make_patchnum.pl
1127 cd .. && miniperl -Ilib make_patchnum.pl
1129 # make sure that we recompile perl.c if the git version changes
1130 ..\perl$(o) : ..\git_version.h
1132 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
1133 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
1134 $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
1136 # this target is for when changes to the main config.sh happen.
1137 # edit config.gc, then make perl using GCC in a minimal configuration (i.e.
1138 # with MULTI, ITHREADS, IMP_SYS, LARGE_FILES, PERLIO and CRYPT off), then make
1139 # this target to regenerate config_H.gc.
1140 # unfortunately, some further manual editing is also then required to restore all
1141 # the special _MSC_VER handling that is otherwise lost.
1142 # repeat for config.bc and config_H.bc (using BORLAND), except that there is no
1143 # _MSC_VER stuff in that case.
1145 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
1146 $(CFGSH_TMPL) > ..\config.sh
1147 $(MINIPERL) -I..\lib ..\configpm --chdir=..
1148 -del /f $(CFGH_TMPL)
1149 -$(MINIPERL) -I..\lib $(ICWD) config_h.PL "INST_VER=$(INST_VER)"
1150 rename config.h $(CFGH_TMPL)
1152 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
1153 $(MINIPERL) -I..\lib ..\configpm --chdir=..
1154 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
1155 $(XCOPY) ..\*.h $(COREDIR)\*.*
1156 $(XCOPY) *.h $(COREDIR)\*.*
1157 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
1158 $(RCOPY) include $(COREDIR)\*.*
1159 $(MINIPERL) -I..\lib $(ICWD) config_h.PL "INST_VER=$(INST_VER)" \
1160 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
1162 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
1163 .IF "$(CCTYPE)" == "BORLAND"
1164 if not exist $(CCLIBDIR)\PSDK\odbccp32.lib \
1165 cd $(CCLIBDIR)\PSDK && implib odbccp32.lib $(ODBCCP32_DLL)
1166 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1167 @$(mktmp c0x32$(o) $(MINI_OBJ),$@,,$(LIBFILES),)
1168 .ELIF "$(CCTYPE)" == "GCC"
1169 $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
1170 $(mktmp $(LKPRE) $(MINI_OBJ) $(LIBFILES) $(LKPOST))
1172 $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
1173 @$(mktmp $(LIBFILES) $(MINI_OBJ))
1178 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
1180 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
1181 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ ..\$(*B).c
1183 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
1184 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
1186 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
1187 # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
1188 # unless the .IF is true), so instead we use a .ELSE with the default.
1189 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
1191 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
1192 .IF "$(USE_IMP_SYS)" == "define"
1193 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
1195 $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
1198 # 1. we don't want to rebuild miniperl.exe when config.h changes
1199 # 2. we don't want to rebuild miniperl.exe with non-default config.h
1200 # 3. we can't have miniperl.exe depend on git_version.h, as miniperl creates it
1201 $(MINI_OBJ) : $(CORE_NOCFG_H)
1203 $(WIN32_OBJ) : $(CORE_H)
1205 $(CORE_OBJ) : $(CORE_H)
1207 $(DLL_OBJ) : $(CORE_H)
1209 $(X2P_OBJ) : $(CORE_H)
1211 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl create_perllibst_h.pl
1212 $(MINIPERL) -I..\lib create_perllibst_h.pl
1213 $(MINIPERL) -I..\lib -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
1214 $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
1216 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
1217 .IF "$(CCTYPE)" == "BORLAND"
1218 $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
1219 @$(mktmp c0d32$(o) $(PERLDLL_OBJ),$@,, \
1220 $(shell @type Extensions_static) $(LIBFILES),perldll.def)
1222 .ELIF "$(CCTYPE)" == "GCC"
1223 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
1224 $(mktmp $(LKPRE) $(PERLDLL_OBJ) \
1225 $(shell @type Extensions_static) \
1226 $(LIBFILES) $(LKPOST))
1227 $(IMPLIB) --output-lib $(PERLIMPLIB) \
1228 --dllname $(PERLDLL:b).dll \
1230 --base-file perl.base \
1231 --output-exp perl.exp
1232 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
1233 $(mktmp $(LKPRE) $(PERLDLL_OBJ) \
1234 $(shell @type Extensions_static) \
1235 $(LIBFILES) perl.exp $(LKPOST))
1237 $(LINK32) -dll -def:perldll.def -out:$@ $(BLINK_FLAGS) \
1238 @Extensions_static \
1239 @$(mktmp -base:0x28000000 $(DELAYLOAD) $(LIBFILES) \
1240 $(PERLDLL_RES) $(PERLDLL_OBJ))
1243 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1245 $(PERLSTATICLIB): Extensions_static
1246 .IF "$(CCTYPE)" == "BORLAND"
1247 $(LIB32) $(LIB_FLAGS) $@ \
1248 @$(mktmp $(shell @type Extensions_static) \
1250 .ELIF "$(CCTYPE)" == "GCC"
1251 # XXX: It would be nice if MinGW's ar accepted a temporary file, but this
1252 # doesn't seem to work:
1253 # $(LIB32) $(LIB_FLAGS) $@ \
1254 # $(mktmp $(LKPRE) $(shell @type Extensions_static) \
1255 # $(PERLDLL_OBJ) $(LKPOST))
1256 $(LIB32) $(LIB_FLAGS) $@ \
1257 $(shell @type Extensions_static) \
1260 $(LIB32) $(LIB_FLAGS) -out:$@ @Extensions_static \
1261 @$(mktmp $(PERLDLL_OBJ))
1263 $(XCOPY) $(PERLSTATICLIB) $(COREDIR)
1265 $(PERLEXE_RES): perlexe.rc $(PERLEXE_MANIFEST) $(PERLEXE_ICO)
1267 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1268 cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1270 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1271 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1273 ..\x2p\hash$(o) : ..\x2p\hash.c
1274 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1276 ..\x2p\str$(o) : ..\x2p\str.c
1277 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1279 ..\x2p\util$(o) : ..\x2p\util.c
1280 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1282 ..\x2p\walk$(o) : ..\x2p\walk.c
1283 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1285 $(X2P) : $(MINIPERL) $(X2P_OBJ) Extensions
1286 $(MINIPERL) -I..\lib ..\x2p\find2perl.PL
1287 $(MINIPERL) -I..\lib ..\x2p\s2p.PL
1288 .IF "$(CCTYPE)" == "BORLAND"
1289 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1290 @$(mktmp c0x32$(o) $(X2P_OBJ),$@,,$(LIBFILES),)
1291 .ELIF "$(CCTYPE)" == "GCC"
1292 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1293 $(mktmp $(LKPRE) $(X2P_OBJ) $(LIBFILES) $(LKPOST))
1295 $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
1296 @$(mktmp $(LIBFILES) $(X2P_OBJ))
1300 $(MINIDIR)\globals$(o) : $(UUDMAP_H) $(BITCOUNT_H)
1302 $(UUDMAP_H) : $(BITCOUNT_H)
1304 $(BITCOUNT_H) : $(GENUUDMAP)
1305 $(GENUUDMAP) $(UUDMAP_H) $(BITCOUNT_H)
1307 $(GENUUDMAP) : $(GENUUDMAP_OBJ)
1308 .IF "$(CCTYPE)" == "BORLAND"
1309 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1310 @$(mktmp c0x32$(o) $(GENUUDMAP_OBJ),$@,,$(LIBFILES),)
1311 .ELIF "$(CCTYPE)" == "GCC"
1312 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1313 $(mktmp $(LKPRE) $(GENUUDMAP_OBJ) $(LIBFILES) $(LKPOST))
1315 $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
1316 @$(mktmp $(LIBFILES) $(GENUUDMAP_OBJ))
1320 perlmain.c : runperl.c
1321 copy runperl.c perlmain.c
1323 perlmain$(o) : perlmain.c
1324 $(CC) $(CFLAGS_O:s,-DPERLDLL,-UPERLDLL,) $(OBJOUT_FLAG)$@ -c perlmain.c
1326 perlmainst.c : runperl.c
1327 copy runperl.c perlmainst.c
1329 perlmainst$(o) : perlmainst.c
1330 $(CC) $(CFLAGS_O) $(OBJOUT_FLAG)$@ -c perlmainst.c
1332 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1333 .IF "$(CCTYPE)" == "BORLAND"
1334 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1335 @$(mktmp c0x32$(o) $(PERLEXE_OBJ),$@,, \
1336 $(PERLIMPLIB) $(LIBFILES),,$(PERLEXE_RES))
1337 .ELIF "$(CCTYPE)" == "GCC"
1338 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1339 $(PERLEXE_OBJ) $(PERLEXE_RES) $(PERLIMPLIB) $(LIBFILES)
1341 $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
1342 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1345 copy $(PERLEXE) $(WPERLEXE)
1346 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1348 $(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES)
1349 .IF "$(CCTYPE)" == "BORLAND"
1350 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1351 @$(mktmp c0x32$(o) $(PERLEXEST_OBJ),$@,, \
1352 $(shell @type Extensions_static) $(PERLSTATICLIB) $(LIBFILES),, \
1354 .ELIF "$(CCTYPE)" == "GCC"
1355 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1356 $(mktmp $(LKPRE) $(shell @type Extensions_static) \
1357 $(PERLSTATICLIB) $(LIBFILES) $(PERLEXEST_OBJ) \
1358 $(PERLEXE_RES) $(LKPOST))
1360 $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
1361 @Extensions_static $(PERLSTATICLIB) /PDB:NONE \
1362 $(LIBFILES) $(PERLEXEST_OBJ) $(SETARGV_OBJ) $(PERLEXE_RES)
1366 MakePPPort: $(MINIPERL) $(CONFIGPM) Extensions_nonxs
1367 $(MINIPERL) -I..\lib $(ICWD) ..\mkppport
1369 #-------------------------------------------------------------------------------
1370 # There's no direct way to mark a dependency on
1371 # DynaLoader.pm, so this will have to do
1372 Extensions : ..\make_ext.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
1373 $(XCOPY) ..\*.h $(COREDIR)\*.*
1374 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic
1376 Extensions_reonly : ..\make_ext.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
1377 $(XCOPY) ..\*.h $(COREDIR)\*.*
1378 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic +re
1380 Extensions_static : ..\make_ext.pl list_static_libs.pl $(PERLDEP) $(CONFIGPM)
1381 $(XCOPY) ..\*.h $(COREDIR)\*.*
1382 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --static
1383 $(MINIPERL) -I..\lib list_static_libs.pl > Extensions_static
1385 Extensions_nonxs : ..\make_ext.pl $(PERLDEP) $(CONFIGPM)
1386 $(XCOPY) ..\*.h $(COREDIR)\*.*
1387 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --nonxs
1389 $(DYNALOADER) : ..\make_ext.pl $(PERLDEP) $(CONFIGPM) Extensions_nonxs
1390 $(XCOPY) ..\*.h $(COREDIR)\*.*
1391 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --dynaloader
1394 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=clean
1396 Extensions_realclean :
1397 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=realclean
1399 #-------------------------------------------------------------------------------
1402 doc: $(PERLEXE) ..\pod\perltoc.pod
1403 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
1404 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
1405 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1407 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1408 # so please check that script before making structural changes here
1409 utils: $(PERLEXE) $(X2P)
1410 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1411 copy ..\README.aix ..\pod\perlaix.pod
1412 copy ..\README.amiga ..\pod\perlamiga.pod
1413 copy ..\README.apollo ..\pod\perlapollo.pod
1414 copy ..\README.beos ..\pod\perlbeos.pod
1415 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1416 copy ..\README.ce ..\pod\perlce.pod
1417 copy ..\README.cn ..\pod\perlcn.pod
1418 copy ..\README.cygwin ..\pod\perlcygwin.pod
1419 copy ..\README.dgux ..\pod\perldgux.pod
1420 copy ..\README.dos ..\pod\perldos.pod
1421 copy ..\README.epoc ..\pod\perlepoc.pod
1422 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1423 copy ..\README.haiku ..\pod\perlhaiku.pod
1424 copy ..\README.hpux ..\pod\perlhpux.pod
1425 copy ..\README.hurd ..\pod\perlhurd.pod
1426 copy ..\README.irix ..\pod\perlirix.pod
1427 copy ..\README.jp ..\pod\perljp.pod
1428 copy ..\README.ko ..\pod\perlko.pod
1429 copy ..\README.linux ..\pod\perllinux.pod
1430 copy ..\README.macos ..\pod\perlmacos.pod
1431 copy ..\README.macosx ..\pod\perlmacosx.pod
1432 copy ..\README.mpeix ..\pod\perlmpeix.pod
1433 copy ..\README.netware ..\pod\perlnetware.pod
1434 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1435 copy ..\README.os2 ..\pod\perlos2.pod
1436 copy ..\README.os390 ..\pod\perlos390.pod
1437 copy ..\README.os400 ..\pod\perlos400.pod
1438 copy ..\README.plan9 ..\pod\perlplan9.pod
1439 copy ..\README.qnx ..\pod\perlqnx.pod
1440 copy ..\README.riscos ..\pod\perlriscos.pod
1441 copy ..\README.solaris ..\pod\perlsolaris.pod
1442 copy ..\README.symbian ..\pod\perlsymbian.pod
1443 copy ..\README.tru64 ..\pod\perltru64.pod
1444 copy ..\README.tw ..\pod\perltw.pod
1445 copy ..\README.uts ..\pod\perluts.pod
1446 copy ..\README.vmesa ..\pod\perlvmesa.pod
1447 copy ..\README.vos ..\pod\perlvos.pod
1448 copy ..\README.win32 ..\pod\perlwin32.pod
1449 copy ..\pod\perldelta.pod ..\pod\perl5139delta.pod
1450 $(PERLEXE) $(PL2BAT) $(UTILS)
1451 $(PERLEXE) $(ICWD) ..\autodoc.pl ..
1452 $(PERLEXE) $(ICWD) ..\pod\perlmodlib.pl -q
1454 ..\pod\perltoc.pod: $(PERLEXE) Extensions Extensions_nonxs
1455 $(PERLEXE) -f ..\pod\buildtoc --build-toc -q
1457 # Note that the pod cleanup in this next section is parsed (and regenerated
1458 # by pod/buildtoc so please check that script before making changes here
1460 distclean: realclean
1461 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1462 $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD) \
1463 $(PERLEXESTATIC) $(PERLSTATICLIB)
1465 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1466 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1467 -del /f $(LIBDIR)\.exists $(LIBDIR)\attributes.pm $(LIBDIR)\DynaLoader.pm
1468 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1469 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1470 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1471 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1472 -del /f $(LIBDIR)\File\Glob.pm
1473 -del /f $(LIBDIR)\Storable.pm
1474 -del /f $(LIBDIR)\Sys\Hostname.pm
1475 -del /f $(LIBDIR)\Time\HiRes.pm
1476 -del /f $(LIBDIR)\Unicode\Normalize.pm
1477 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1478 -del /f $(LIBDIR)\Win32.pm
1479 -del /f $(LIBDIR)\Win32CORE.pm
1480 -del /f $(LIBDIR)\Win32API\File.pm
1481 -del /f $(LIBDIR)\Win32API\File\cFile.pc
1482 -del /f $(DISTDIR)\XSLoader\XSLoader.pm
1483 -if exist $(LIBDIR)\App rmdir /s /q $(LIBDIR)\App
1484 -if exist $(LIBDIR)\Archive rmdir /s /q $(LIBDIR)\Archive
1485 -if exist $(LIBDIR)\Attribute rmdir /s /q $(LIBDIR)\Attribute
1486 -if exist $(LIBDIR)\autodie rmdir /s /q $(LIBDIR)\autodie
1487 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1488 -if exist $(LIBDIR)\CGI rmdir /s /q $(LIBDIR)\CGI
1489 -if exist $(LIBDIR)\CPAN rmdir /s /q $(LIBDIR)\CPAN
1490 -if exist $(LIBDIR)\CPANPLUS rmdir /s /q $(LIBDIR)\CPANPLUS
1491 -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
1492 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1493 -if exist $(LIBDIR)\Devel rmdir /s /q $(LIBDIR)\Devel
1494 -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest
1495 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1496 -if exist $(LIBDIR)\encoding rmdir /s /q $(LIBDIR)\encoding
1497 -if exist $(LIBDIR)\ExtUtils\CBuilder rmdir /s /q $(LIBDIR)\ExtUtils\CBuilder
1498 -if exist $(LIBDIR)\ExtUtils\Command rmdir /s /q $(LIBDIR)\ExtUtils\Command
1499 -if exist $(LIBDIR)\ExtUtils\Constant rmdir /s /q $(LIBDIR)\ExtUtils\Constant
1500 -if exist $(LIBDIR)\ExtUtils\Liblist rmdir /s /q $(LIBDIR)\ExtUtils\Liblist
1501 -if exist $(LIBDIR)\ExtUtils\MakeMaker rmdir /s /q $(LIBDIR)\ExtUtils\MakeMaker
1502 -if exist $(LIBDIR)\File\Spec rmdir /s /q $(LIBDIR)\File\Spec
1503 -if exist $(LIBDIR)\Filter rmdir /s /q $(LIBDIR)\Filter
1504 -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
1505 -if exist $(LIBDIR)\I18N\LangTags rmdir /s /q $(LIBDIR)\I18N\LangTags
1506 -if exist $(LIBDIR)\inc rmdir /s /q $(LIBDIR)\inc
1507 -if exist $(LIBDIR)\Module\Pluggable rmdir /s /q $(LIBDIR)\Module\Pluggable
1508 -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
1509 -if exist $(LIBDIR)\IPC rmdir /s /q $(LIBDIR)\IPC
1510 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1511 -if exist $(LIBDIR)\Locale rmdir /s /q $(LIBDIR)\Locale
1512 -if exist $(LIBDIR)\Log rmdir /s /q $(LIBDIR)\Log
1513 -if exist $(LIBDIR)\Math rmdir /s /q $(LIBDIR)\Math
1514 -if exist $(LIBDIR)\Memoize rmdir /s /q $(LIBDIR)\Memoize
1515 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1516 -if exist $(LIBDIR)\Module rmdir /s /q $(LIBDIR)\Module
1517 -if exist $(LIBDIR)\mro rmdir /s /q $(LIBDIR)\mro
1518 -if exist $(LIBDIR)\Net\FTP rmdir /s /q $(LIBDIR)\Net\FTP
1519 -if exist $(LIBDIR)\Object rmdir /s /q $(LIBDIR)\Object
1520 -if exist $(LIBDIR)\Package rmdir /s /q $(LIBDIR)\Package
1521 -if exist $(LIBDIR)\Params rmdir /s /q $(LIBDIR)\Params
1522 -if exist $(LIBDIR)\Parse rmdir /s /q $(LIBDIR)\Parse
1523 -if exist $(LIBDIR)\PerlIO rmdir /s /q $(LIBDIR)\PerlIO
1524 -if exist $(LIBDIR)\Pod\Perldoc rmdir /s /q $(LIBDIR)\Pod\Perldoc
1525 -if exist $(LIBDIR)\Pod\Simple rmdir /s /q $(LIBDIR)\Pod\Simple
1526 -if exist $(LIBDIR)\Pod\Text rmdir /s /q $(LIBDIR)\Pod\Text
1527 -if exist $(LIBDIR)\re rmdir /s /q $(LIBDIR)\re
1528 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1529 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1530 -if exist $(LIBDIR)\TAP rmdir /s /q $(LIBDIR)\TAP
1531 -if exist $(LIBDIR)\Term\UI rmdir /s /q $(LIBDIR)\Term\UI
1532 -if exist $(LIBDIR)\Test rmdir /s /q $(LIBDIR)\Test
1533 -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread
1534 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1535 -if exist $(LIBDIR)\Tie\Hash rmdir /s /q $(LIBDIR)\Tie\Hash
1536 -if exist $(LIBDIR)\Unicode\Collate rmdir /s /q $(LIBDIR)\Unicode\Collate
1537 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1538 -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
1539 -cd $(PODDIR) && del /f *.html *.bat \
1540 perl5139delta.pod perlaix.pod perlamiga.pod perlapi.pod \
1541 perlapollo.pod perlbeos.pod perlbs2000.pod perlce.pod \
1542 perlcn.pod perlcygwin.pod perldgux.pod perldos.pod perlepoc.pod \
1543 perlfreebsd.pod perlhaiku.pod perlhpux.pod perlhurd.pod \
1544 perlintern.pod perlirix.pod perljp.pod perlko.pod perllinux.pod \
1545 perlmacos.pod perlmacosx.pod perlmodlib.pod perlmpeix.pod \
1546 perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \
1547 perlos400.pod perlplan9.pod perlqnx.pod perlriscos.pod \
1548 perlsolaris.pod perlsymbian.pod perltoc.pod perltru64.pod \
1549 perltw.pod perluniprops.pod perluts.pod perlvmesa.pod \
1550 perlvos.pod perlwin32.pod
1551 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1552 perldoc perlivp dprofpp libnetcfg enc2xs piconv cpan *.bat \
1553 xsubpp instmodsh prove ptar ptardiff ptargrep cpanp-run-perl cpanp cpan2dist shasum corelist config_data
1554 -cd ..\x2p && del /f find2perl s2p psed *.bat
1555 -del /f ..\config.sh perlmain.c dlutils.c config.h.new \
1558 -del /f ..\lib\Config_git.pl
1561 -del /f $(PERLEXE_RES) perl.base
1562 -cd .. && del /s *$(a) *.map *.pdb *.ilk *.tds *.bs *$(o) .exists pm_to_blib ppport.h
1563 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1564 -cd $(DISTDIR) && del /s *.def Makefile Makefile.old
1565 -cd $(CPANDIR) && del /s *.def Makefile Makefile.old
1566 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1567 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1568 -if exist pod2htmd.tmp del pod2htmd.tmp
1569 -if exist pod2htmi.tmp del pod2htmi.tmp
1570 -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
1571 -del /f ..\t\test_state
1573 install : all installbare installhtml
1575 installbare : $(RIGHTMAKE) utils ..\pod\perltoc.pod
1576 $(PERLEXE) ..\installperl
1577 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1578 if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\*.*
1579 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1580 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1581 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1582 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1585 $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*
1587 inst_lib : $(CONFIGPM)
1588 $(RCOPY) ..\lib $(INST_LIB)\*.*
1590 $(UNIDATAFILES) ..\pod\perluniprops.pod .UPDATEALL : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables Extensions_nonxs
1591 cd ..\lib\unicore && \
1592 ..\$(MINIPERL) -I.. -I..\..\dist\Cwd\lib -I..\..\dist\Cwd mktables -P ..\..\pod -maketest -makelist -p
1594 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils
1595 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1596 if exist ..\t\perl.exe del /f ..\t\perl.exe
1597 rename ..\t\miniperl.exe perl.exe
1598 .IF "$(CCTYPE)" == "BORLAND"
1599 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1601 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1605 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1607 test-prep : all utils
1608 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1609 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1610 .IF "$(CCTYPE)" == "BORLAND"
1611 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1613 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1615 .IF "$(CCTYPE)" == "GCC"
1616 .IF "$(GCC_4XX)" == "define"
1617 $(XCOPY) $(GCCHELPERDLL) ..\t\$(NULL)
1621 test : $(RIGHTMAKE) test-prep
1622 set PERL_STATIC_EXT=$(STATIC_EXT) && \
1623 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1625 test-reonly : reonly utils
1626 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1627 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1628 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1630 $(PERLEXE) -I..\lib harness $(OPT) -re \bpat\\/ $(EXTRA) && \
1634 cd .. && regen.pl && cd win32
1636 test-notty : test-prep
1637 set PERL_STATIC_EXT=$(STATIC_EXT) && \
1638 set PERL_SKIP_TTY_TEST=1 && \
1639 cd ..\t && $(PERLEXE) -I.\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1641 _test : $(RIGHTMAKE)
1642 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1643 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1644 .IF "$(CCTYPE)" == "BORLAND"
1645 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1647 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1649 set PERL_STATIC_EXT=$(STATIC_EXT) && \
1650 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1653 -@erase miniperlmain$(o)
1655 -@erase perlglob$(o)
1656 -@erase perlmain$(o)
1657 -@erase perlmainst$(o)
1660 -@erase /f ..\git_version.h
1664 -@erase $(PERLEXESTATIC)
1665 -@erase $(PERLSTATICLIB)
1668 -@erase $(GENUUDMAP) $(GENUUDMAP_OBJ) $(UUDMAP_H) $(BITCOUNT_H)
1669 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1670 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1671 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1672 -@erase $(UNIDATAFILES)
1673 -@erase $(WIN32_OBJ)
1676 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1677 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1678 -@erase ..\x2p\*.exe ..\x2p\*.bat
1682 -@erase Extensions_static
1686 clean : Extensions_clean _clean
1688 realclean : Extensions_realclean _clean
1690 # Handy way to run perlbug -ok without having to install and run the
1691 # installed perlbug. We don't re-run the tests here - we trust the user.
1692 # Please *don't* use this unless all tests pass.
1693 # If you want to report test failures, use "dmake nok" instead.
1695 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1698 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1701 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1704 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok