3 # This is written in a peculiar style, since we're trying to avoid
4 # most of the constructs we'll be testing for. (This comment is
5 # probably obsolete on the avoidance side, though still current
6 # on the peculiarity side.)
8 # t/TEST and t/harness need to share code. The logical way to do this would be
9 # to have the common code in a file both require or use. However, t/TEST needs
10 # to still work, to generate test results, even if require isn't working, so
11 # we cannot do that. t/harness has no such restriction, so it is quite
12 # acceptable to have it require t/TEST.
14 # In which case, we need to stop t/TEST actually running tests, as all
15 # t/harness needs are its subroutines.
17 # Measure the elapsed wallclock time.
20 # If we're doing deparse tests, ignore failures for these
23 # And skip even running these
26 # directories with special sets of test switches
31 '../ext/File-Glob/t' => '-I.. -MTestInit', # FIXME - tests assume t/
34 # "not absolute" is the default, as it saves some fakery within TestInit
35 # which can perturb tests, and takes CPU. Working with the upstream author of
36 # any of these, to figure out how to remove them from this list, considered
39 '../cpan/Archive-Tar' => 1,
40 '../cpan/AutoLoader' => 1,
42 '../cpan/Devel-PPPort' => 1,
43 '../cpan/Encode' => 1,
44 '../cpan/ExtUtils-Command' => 1,
45 '../cpan/ExtUtils-Constant' => 1,
46 '../cpan/ExtUtils-Install' => 1,
47 '../cpan/ExtUtils-MakeMaker' => 1,
48 '../cpan/ExtUtils-Manifest' => 1,
49 '../cpan/File-Fetch' => 1,
50 '../cpan/IPC-Cmd' => 1,
51 '../cpan/IPC-SysV' => 1,
52 '../cpan/Locale-Codes' => 1,
53 '../cpan/Module-Load' => 1,
54 '../cpan/Module-Load-Conditional' => 1,
55 '../cpan/Parse-CPAN-Meta' => 1,
56 '../cpan/Pod-Simple' => 1,
57 '../cpan/Test-Simple' => 1,
58 '../cpan/podlators' => 1,
60 '../dist/ExtUtils-ParseXS' => 1,
61 '../dist/Tie-File' => 1,
65 ('../cpan/B-Debug' => 1,
66 '../cpan/Compress-Raw-Bzip2' => 1,
67 '../cpan/Compress-Raw-Zlib' => 1,
68 '../cpan/Devel-PPPort' => 1,
69 '../cpan/Getopt-Long' => 1,
70 '../cpan/IO-Compress' => 1,
71 '../cpan/MIME-Base64' => 1,
72 '../cpan/parent' => 1,
73 '../cpan/Parse-CPAN-Meta' => 1,
74 '../cpan/Pod-Simple' => 1,
75 '../cpan/podlators' => 1,
76 '../cpan/Test-Simple' => 1,
77 '../cpan/Tie-RefHash' => 1,
78 '../cpan/Unicode-Collate' => 1,
79 '../cpan/Unicode-Normalize' => 1,
82 # delete env vars that may influence the results
83 # but allow override via *_TEST env var if wanted
84 # (e.g. PERL5OPT_TEST=-d:NYTProf)
85 my @bad_env_vars = qw(
86 PERL5LIB PERLLIB PERL5OPT
87 PERL_YAML_BACKEND PERL_JSON_BACKEND
90 for my $envname (@bad_env_vars) {
91 my $override = $ENV{"${envname}_TEST"};
92 if (defined $override) {
93 warn "$0: $envname=$override\n";
94 $ENV{$envname} = $override;
97 delete $ENV{$envname};
101 # Location to put the Valgrind log.
120 # for testing TEST only
121 #BEGIN { require '../lib/strict.pm'; "strict"->import() };
122 #BEGIN { require '../lib/warnings.pm'; "warnings"->import() };
124 # remove empty elements due to insertion of empty symbols via "''p1'" syntax
125 @ARGV = grep($_,@ARGV) if $^O eq 'VMS';
127 # String eval to avoid loading File::Glob on non-miniperl.
128 # (Windows only uses this script for miniperl.)
129 @ARGV = eval 'map glob, @ARGV' if $^O eq 'MSWin32';
131 our $show_elapsed_time = $ENV{HARNESS_TIMER} || 0;
133 # Cheesy version of Getopt::Std. We can't replace it with that, because we
134 # can't rely on require working.
137 foreach my $idx (0..$#ARGV) {
138 push( @argv, $ARGV[$idx] ), next unless $ARGV[$idx] =~ /^-(\S+)$/;
139 $::benchmark = 1 if $1 eq 'benchmark';
140 $::core = 1 if $1 eq 'core';
141 $::verbose = 1 if $1 eq 'v';
142 $::torture = 1 if $1 eq 'torture';
143 $::with_utf8 = 1 if $1 eq 'utf8';
144 $::with_utf16 = 1 if $1 eq 'utf16';
145 $::taintwarn = 1 if $1 eq 'taintwarn';
146 if ($1 =~ /^deparse(,.+)?$/) {
148 $::deparse_opts = $1;
149 _process_deparse_config();
155 chdir 't' if -f 't/TEST';
156 if (-f 'TEST' && -f 'harness' && -d '../lib') {
160 die "You need to run \"make test\" first to set things up.\n"
161 unless -e 'perl' or -e 'perl.exe' or -e 'perl.pm';
163 # check leakage for embedders
164 $ENV{PERL_DESTRUCT_LEVEL} = 2 unless exists $ENV{PERL_DESTRUCT_LEVEL};
165 # check existence of all symbols
166 $ENV{PERL_DL_NONLAZY} = 1 unless exists $ENV{PERL_DL_NONLAZY};
168 $ENV{EMXSHELL} = 'sh'; # For OS/2
170 if ($show_elapsed_time) { require Time::HiRes }
171 my %timings = (); # testname => [@et] pairs if $show_elapsed_time.
173 # Roll your own File::Find!
174 sub _find_tests { our @found=(); push @ARGV, _find_files('\.t$', $_[0]) }
176 my($patt, @dirs) = @_;
177 for my $dir (@dirs) {
178 opendir DIR, $dir or die "Trouble opening $dir: $!";
179 foreach my $f (sort { $a cmp $b } readdir DIR) {
182 my $fullpath = "$dir/$f";
185 _find_files($patt, $fullpath);
186 } elsif ($f =~ /$patt/) {
187 push @found, $fullpath;
195 # Scan the text of the test program to find switches and special options
196 # we might need to apply.
198 my($test, $type) = @_;
200 open(my $script, "<", $test) or die "Can't read $test.\n";
201 my $first_line = <$script>;
203 $first_line =~ tr/\0//d if $::with_utf16;
206 if ($first_line =~ /#!.*\bperl.*\s-\w*([tT])/) {
210 # not all tests are expected to pass with this option
218 if ($type eq 'deparse') {
219 # Look for #line directives which change the filename
221 $file_opts = $file_opts . ",-f$3$4"
222 if /^#\s*line\s+(\d+)\s+((\w+)|"([^"]+)")/;
228 my $perl = $^O eq 'MSWin32' ? '.\perl' : './perl';
233 $test =~ /^(.+)\/[^\/]+/;
235 my $testswitch = $dir_to_switch{$dir};
236 if (!defined $testswitch) {
237 if ($test =~ s!^(\.\./(cpan|dist|ext)/[^/]+)/t!t!) {
239 $return_dir = '../../t';
241 $perl = '../../t/perl';
242 $testswitch = "-I../.. -MTestInit=U2T";
243 if ($2 eq 'cpan' || $2 eq 'dist') {
245 $testswitch = $testswitch . ',A';
247 if ($temp_no_core{$run_dir}) {
248 $testswitch = $testswitch . ',NC';
251 } elsif ($test =~ m!^\.\./lib!) {
252 $testswitch = '-I.. -MTestInit=U1'; # -T will remove . from @INC
254 $testswitch = '-I.. -MTestInit'; # -T will remove . from @INC
258 my $utf8 = ($::with_utf8 || $::with_utf16) ? "-I$lib -Mutf8" : '';
265 return_dir => $return_dir,
266 testswitch => $testswitch,
276 my($options, $type) = @_;
278 my $test = $options->{test};
281 if ($type eq 'deparse') {
282 my $perl = "$options->{perl} $options->{testswitch}";
283 my $lib = $options->{lib};
286 "$perl $options->{switch} -I$lib -MO=-qq,Deparse,-sv1.,".
287 "-l$::deparse_opts$options->{file} ".
289 "&& $perl $options->{switch} -I$lib $test.dp"
292 elsif ($type eq 'perl') {
293 my $perl = $options->{perl};
294 my $redir = $^O eq 'VMS' ? '2>&1' : '';
296 if ($ENV{PERL_VALGRIND}) {
297 my $perl_supp = $options->{return_dir} ? "$options->{return_dir}/perl.supp" : "perl.supp";
298 my $valgrind_exe = $ENV{VALGRIND} // 'valgrind';
299 if ($options->{run_dir}) {
300 $Valgrind_Log = "$options->{run_dir}/$Valgrind_Log";
302 my $vg_opts = $ENV{VG_OPTS}
303 // "--log-file=$Valgrind_Log "
304 . "--suppressions=$perl_supp --leak-check=yes "
305 . "--leak-resolution=high --show-reachable=yes "
306 . "--num-callers=50 --track-origins=yes";
307 # Force logging if not asked for (so cachegrind reporting works below)
308 if ($vg_opts !~ /--log-file/) {
309 $vg_opts = "--log-file=$Valgrind_Log $vg_opts";
311 $perl = "$valgrind_exe $vg_opts $perl";
314 my $args = "$options->{testswitch} $options->{switch} $options->{utf8}";
315 $cmd = $perl . _quote_args($args) . " $test $redir";
323 if ($options->{run_dir}) {
324 my $run_dir = $options->{run_dir};
325 chdir $run_dir or die "Can't chdir to '$run_dir': $!";
328 # Remove previous valgrind output otherwise it will interfere
329 my $test = $options->{test};
331 (local $Valgrind_Log = "$test.valgrind-current") =~ s/^.*\///;
333 if ($ENV{PERL_VALGRIND} && -e $Valgrind_Log) {
335 or warn "$0: Failed to unlink '$Valgrind_Log': $!\n";
344 if ($options->{return_dir}) {
345 my $return_dir = $options->{return_dir};
347 or die "Can't chdir from '$options->{run_dir}' to '$return_dir': $!";
354 my ($test, $type) = @_;
356 my $options = _scan_test($test, $type);
357 # $test might have changed if we're in ext/Foo, so don't use it anymore
358 # from now on. Use $options->{test} instead.
360 _before_fork($options);
362 my $cmd = _cmd($options, $type);
364 open(my $results, "$cmd |") or print "can't run '$cmd': $!.\n";
366 _after_fork($options);
368 # Our environment may force us to use UTF-8, but we can't be sure that
369 # anything we're reading from will be generating (well formed) UTF-8
370 # This may not be the best way - possibly we should unset ${^OPEN} up
381 foreach (split(/\s+/,$args)) {
382 # In VMS protect with doublequotes because otherwise
383 # DCL will lowercase -- unless already doublequoted.
384 $_ = q(").$_.q(") if ($^O eq 'VMS') && !/^\"/ && length($_) > 0;
385 $argstring = $argstring . ' ' . $_;
391 return unless defined $_[0];
392 return map {$_, 1} split /\s+/, $_[0];
395 sub _tests_from_manifest {
396 my ($extensions, $known_extensions) = @_;
398 my %extensions = _populate_hash($extensions);
399 my %known_extensions = _populate_hash($known_extensions);
401 foreach (keys %known_extensions) {
402 $skip{$_} = 1 unless $extensions{$_};
406 my $mani = '../MANIFEST';
407 if (open(MANI, $mani)) {
409 if (m!^((?:cpan|dist|ext)/(\S+)/+(?:[^/\s]+\.t|test\.pl)|lib/\S+?(?:\.t|test\.pl))\s!) {
412 if (!$::core || $t =~ m!^lib/[a-z]!) {
413 if (defined $extension) {
414 $extension =~ s!/t(:?/\S+)*$!!;
415 # XXX Do I want to warn that I'm skipping these?
416 next if $skip{$extension};
417 my $flat_extension = $extension;
418 $flat_extension =~ s!-!/!g;
419 next if $skip{$flat_extension}; # Foo/Bar may live in Foo-Bar
422 push @results, $path;
423 $::path_to_name{$path} = $t;
429 warn "$0: cannot open $mani: $!\n";
435 # base first, as TEST bails out if that can't run
436 # then comp, to validate that require works
437 # then run, to validate that -M works
438 # then we know we can -MTestInit for everything else, making life simpler
439 foreach my $dir (qw(base comp run cmd io re opbasic op uni mro perf)) {
443 _find_tests('porting');
446 # Config.pm may be broken for make minitest. And this is only a refinement
447 # for skipping tests on non-default builds, so it is allowed to fail.
448 # What we want to to is make a list of extensions which we did not build.
449 my $configsh = '../config.sh';
450 my ($extensions, $known_extensions);
452 open FH, $configsh or die "Can't open $configsh: $!";
454 if (/^extensions=['"](.*)['"]$/) {
457 elsif (/^known_extensions=['"](.*)['"]$/) {
458 $known_extensions = $1;
461 if (!defined $known_extensions) {
462 warn "No known_extensions line found in $configsh";
464 if (!defined $extensions) {
465 warn "No extensions line found in $configsh";
468 # The "complex" constructions of list return from a subroutine, and push of
469 # a list, might fail if perl is really hosed, but they aren't needed for
470 # make minitest, and the building of extensions will likely also fail if
471 # something is that badly wrong.
472 push @ARGV, _tests_from_manifest($extensions, $known_extensions);
474 _find_tests('japh') if $::torture;
475 _find_tests('benchmark') if $::benchmark or $ENV{PERL_BENCHMARK};
476 _find_tests('bigmem') if $ENV{PERL_TEST_MEMORY};
481 _testprogs('deparse', '', @ARGV);
483 elsif ($::with_utf16) {
486 print STDERR "# ENDIAN $e BOM $b\n";
489 my $u = $a . "." . ($e ? "l" : "b") . "e" . ($b ? "b" : "");
490 my $f = $e ? "v" : "n";
494 if (open(U, ">$u")) {
495 print U pack("$f", 0xFEFF) if $b;
497 print U pack("$f*", unpack("C*", $_));
504 _testprogs('perl', '', @UARGV);
510 _testprogs('perl', '', @ARGV);
514 my ($type, $args, @tests) = @_;
516 print <<'EOT' if ($type eq 'deparse');
517 ------------------------------------------------------------------------------
519 ------------------------------------------------------------------------------
524 foreach my $t (@tests) {
525 unless (exists $::path_to_name{$t}) {
527 $::path_to_name{$t} = $tname;
531 foreach (@::path_to_name{@tests}) {
532 s/\.\w+\z/ /; # space gives easy doubleclick to select fname
534 $maxlen = $len if $len > $maxlen;
536 # + 3 : we want three dots between the test name and the "ok"
537 my $dotdotdot = $maxlen + 3 ;
538 my $grind_ct = 0; # count of non-empty valgrind reports
539 my $total_files = @tests;
541 my $tested_files = 0;
544 my $toolnm; # valgrind, cachegrind, perf
546 while (my $test = shift @tests) {
547 my ($test_start_time, @starttimes) = 0;
548 if ($show_elapsed_time) {
549 $test_start_time = Time::HiRes::time();
550 # times() reports usage by TEST, but we want usage of each
551 # testprog it calls, so record accumulated times now,
552 # subtract them out afterwards. Ideally, we'd take times
553 # in BEGIN/END blocks (giving better visibility of self vs
554 # children of each testprog), but that would require some
555 # IPC to send results back here, or a completely different
556 # collection scheme (Storable isn't tuned for incremental use)
562 if ($type eq 'deparse' && $test =~ $deparse_skips) {
565 my $te = $::path_to_name{$test} . '.'
566 x ($dotdotdot - length($::path_to_name{$test})) .' ';
568 if ($^O ne 'VMS') { # defer printing on VMS due to piping bug
573 (local $Valgrind_Log = "$test.valgrind-current") =~ s/^.*\///;
575 my $results = _run_test($test, $type);
581 my $trailing_leader = 0;
585 next if /^\s*$/; # skip blank lines
586 if (/^1..$/ && ($^O eq 'VMS')) {
587 # VMS pipe bug inserts blank lines.
589 if ($l2 =~ /^\s*$/) {
598 if ($trailing_leader) {
599 # shouldn't be anything following a postfix 1..n
600 $failure = 'FAILED--extra output after trailing 1..n';
603 if (/^1\.\.([0-9]+)( todo ([\d ]+))?/) {
605 $failure = 'FAILED--seen duplicate leader';
609 %todo = map { $_ => 1 } split / /, $3 if $3;
610 $totmax = $totmax + $max;
611 $tested_files = $tested_files + 1;
613 # 1..n appears at end of file
614 $trailing_leader = 1;
616 $failure = "FAILED--expected $max tests, saw $next";
626 if (/^(not )?ok(?: (\d+))?[^\#]*(\s*\#.*)?/) {
627 unless ($seen_leader) {
634 my($not, $num, $extra, $istodo) = ($1, $2, $3, 0);
635 $num = $next unless $num;
639 # SKIP is essentially the same as TODO for t/TEST
640 # this still conforms to TAP:
641 # http://testanything.org/wiki/index.php/TAP_specification
642 $extra and $istodo = $extra =~ /#\s*(?:TODO|SKIP)\b/;
643 $istodo = 1 if $todo{$num};
645 if( $not && !$istodo ) {
646 $failure = "FAILED at test $num";
651 $failure ="FAILED--expected test $next, saw test $num";
655 elsif (/^Bail out!\s*(.*)/i) { # magic words
656 die "FAILED--Further testing stopped" . ($1 ? ": $1\n" : ".\n");
659 # module tests are allowed extra output,
660 # because Test::Harness allows it
661 next if $test =~ /^\W*(cpan|dist|ext|lib)\b/;
662 $failure = "FAILED--unexpected output at test $next";
670 if (not defined $failure) {
671 $failure = 'FAILED--no leader found' unless $seen_leader;
674 _check_valgrind(\$toolnm, \$grind_ct, \$test);
676 if ($type eq 'deparse' && !$ENV{KEEP_DEPARSE_FILES}) {
679 if (not defined $failure and $next != $max) {
680 $failure="FAILED--expected $max tests, saw $next";
683 if( !defined $failure # don't mask a test failure
686 $failure = "FAILED--non-zero wait status: $?";
689 # Deparse? Should it have passed or failed?
690 if ($type eq 'deparse' && $test =~ $deparse_failures) {
692 # Wait, it didn't fail? Great news! Tell someone!
693 $failure = "FAILED--all tests passed but test should have failed";
695 # Bah, still failing. Mask it.
696 print "${te}skipped\n";
697 $tested_files = $tested_files - 1;
702 if (defined $failure) {
703 print "${te}$failure\n";
704 $::bad_files = $::bad_files + 1;
705 if ($test =~ /^base/ && ! defined &DynaLoader::boot_DynaLoader) {
706 # Die if running under minitest (no DynaLoader). Otherwise
707 # keep going, as we know that Perl basically works, or we
708 # would not have been able to actually compile it all the way.
709 die "Failed a basic test ($test) under minitest -- cannot continue.\n";
711 $failed_tests{$test} = 1;
715 my ($elapsed, $etms) = ("", 0);
716 if ( $show_elapsed_time ) {
717 $etms = (Time::HiRes::time() - $test_start_time) * 1000;
718 $elapsed = sprintf(" %8.0f ms", $etms);
720 my (@endtimes) = times;
721 $endtimes[$_] -= $starttimes[$_] for 0..$#endtimes;
722 splice @endtimes, 0, 2; # drop self/harness times
723 $_ *= 1000 for @endtimes; # and scale to ms
724 $timings{$test} = [$etms,@endtimes];
725 $elapsed .= sprintf(" %5.0f ms", $_) for @endtimes;
727 print "${te}ok$elapsed\n";
728 $good_files = $good_files + 1;
731 print "${te}skipped\n";
732 $tested_files = $tested_files - 1;
737 if ($::bad_files == 0) {
739 print "All tests successful.\n";
740 # XXX add mention of 'perlbug -ok' ?
743 die "FAILED--no tests were run for some reason.\n";
747 my $pct = $tested_files ? sprintf("%.2f", ($tested_files - $::bad_files) / $tested_files * 100) : "0.00";
748 my $s = $::bad_files == 1 ? "" : "s";
749 warn "Failed $::bad_files test$s out of $tested_files, $pct% okay.\n";
750 for my $test ( sort keys %failed_tests ) {
754 ### Since not all tests were successful, you may want to run some of
755 ### them individually and examine any diagnostic messages they produce.
756 ### See the INSTALL document's section on "make test".
758 warn <<'SHRDLU_2' if $good_files / $total_files > 0.8;
759 ### You have a good chance to get more information by running
761 ### in the 't' directory since most (>=80%) of the tests succeeded.
763 if (eval {require Config; import Config; 1}) {
764 if ($::Config{usedl} && (my $p = $::Config{ldlibpthname})) {
766 ### You may have to set your dynamic library search path,
767 ### $p, to point to the build directory:
769 if (exists $ENV{$p} && $ENV{$p} ne '') {
771 ### setenv $p `pwd`:\$$p; cd t; ./perl harness
772 ### $p=`pwd`:\$$p; export $p; cd t; ./perl harness
773 ### export $p=`pwd`:\$$p; cd t; ./perl harness
777 ### setenv $p `pwd`; cd t; ./perl harness
778 ### $p=`pwd`; export $p; cd t; ./perl harness
779 ### export $p=`pwd`; cd t; ./perl harness
783 ### for csh-style shells, like tcsh; or for traditional/modern
784 ### Bourne-style shells, like bash, ksh, and zsh, respectively.
789 printf "Elapsed: %d sec\n", time() - $t0;
790 my ($user,$sys,$cuser,$csys) = times;
791 my $tot = sprintf("u=%.2f s=%.2f cu=%.2f cs=%.2f scripts=%d tests=%d",
792 $user,$sys,$cuser,$csys,$tested_files,$totmax);
795 if (-d $show_elapsed_time) {
796 # HARNESS_TIMER = <a-directory>. Save timings etc to
797 # storable file there. NB: the test cds to ./t/, so
798 # relative path must account for that, ie ../../perf
799 # points to dir next to source tree.
802 $dt[5] += 1900; $dt[4] += 1; # fix year, month
803 my $fn = "$show_elapsed_time/".join('-', @dt[5,4,3,2,1]).".ttimes";
804 Storable::store({ perf => \%timings,
805 gather_conf_platform_info(),
808 print "wrote storable file: $fn\n";
812 _cleanup_valgrind(\$toolnm, \$grind_ct);
814 exit ($::bad_files != 0);
816 # Collect platform, config data that should allow comparing
817 # performance data between different machines. With enough data,
818 # and/or clever statistical analysis, it should be possible to
819 # determine the effect of config choices, more memory, etc
821 sub gather_conf_platform_info {
822 # currently rather quick & dirty, and subject to change
823 # for both content and format.
825 my (%conf, @platform) = ();
826 $conf{$_} = $Config::Config{$_} for
827 grep /cc|git|config_arg\d+/, keys %Config::Config;
828 if (-f '/proc/cpuinfo') {
829 open my $fh, '/proc/cpuinfo' or warn "$!: /proc/cpuinfo\n";
830 @platform = grep /name|cpu/, <$fh>;
831 chomp $_ for @platform;
833 unshift @platform, $^O;
837 platform => {cpu => \@platform,
838 mem => [ grep s/\s+/ /,
839 grep chomp, `free` ],
840 load => [ grep chomp, `uptime` ],
842 host => (grep chomp, `hostname -f`),
843 version => '0.03', # bump for conf, platform, or data collection changes
847 sub _check_valgrind {
848 return unless $ENV{PERL_VALGRIND};
850 my ($toolnm, $grind_ct, $test) = @_;
852 $$toolnm = $ENV{VALGRIND};
853 $$toolnm =~ s|.*/||; # keep basename
854 my @valgrind; # gets content of file
855 if (-e $Valgrind_Log) {
856 if (open(V, $Valgrind_Log)) {
860 warn "$0: Failed to open '$Valgrind_Log': $!\n";
863 if ($ENV{VG_OPTS} =~ /(cachegrind)/ or $$toolnm =~ /(perf)/) {
865 if ($$toolnm eq 'perf') {
866 # append perfs subcommand, not just stat
867 my ($sub) = split /\s/, $ENV{VG_OPTS};
870 if (rename $Valgrind_Log, "$$test.$$toolnm") {
873 warn "$0: Failed to create '$$test.$$toolnm': $!\n";
879 for my $i (0..$#valgrind) {
880 local $_ = $valgrind[$i];
881 if (/^==\d+== ERROR SUMMARY: (\d+) errors? /) {
882 $errors = $errors + $1; # there may be multiple error summaries
883 } elsif (/^==\d+== LEAK SUMMARY:/) {
884 for my $off (1 .. 4) {
885 if ($valgrind[$i+$off] =~
886 /(?:lost|reachable):\s+\d+ bytes in (\d+) blocks/) {
887 $leaks = $leaks + $1;
892 if ($errors or $leaks) {
893 if (rename $Valgrind_Log, "$$test.valgrind") {
894 $$grind_ct = $$grind_ct + 1;
896 warn "$0: Failed to create '$$test.valgrind': $!\n";
900 # Quiet wasn't asked for? Something may be amiss
901 if ($ENV{VG_OPTS} && $ENV{VG_OPTS} !~ /(^|\s)(-q|--quiet)(\s|$)/) {
902 warn "No valgrind output?\n";
905 if (-e $Valgrind_Log) {
907 or warn "$0: Failed to unlink '$Valgrind_Log': $!\n";
911 sub _cleanup_valgrind {
912 return unless $ENV{PERL_VALGRIND};
914 my ($toolnm, $grind_ct) = @_;
915 my $s = $$grind_ct == 1 ? '' : 's';
916 print "$$grind_ct valgrind report$s created.\n", ;
917 if ($$toolnm eq 'cachegrind') {
918 # cachegrind leaves a lot of cachegrind.out.$pid litter
919 # around the tree, find and delete them
920 unlink _find_files('cachegrind.out.\d+$',
921 qw ( ../t ../cpan ../ext ../dist/ ));
925 # Generate regexps of known bad filenames / skips from Porting/deparse-skips.txt
928 sub _process_deparse_config {
929 my @deparse_failures;
932 my $f = '../Porting/deparse-skips.txt';
935 if (!open($skips, '<', $f)) {
936 warn "Failed to find $f: $!\n";
941 if (/__DEPARSE_FAILURES__/) {
942 $in = \@deparse_failures; next;
943 } elsif (/__DEPARSE_SKIPS__/) {
944 $in = \@deparse_skips; next;
949 s/#.*$//; # Kill comments
950 s/\s+$//; # And trailing whitespace
957 for my $f (@deparse_failures, @deparse_skips) {
958 if ($f =~ m|/$|) { # Dir? Skip everything below it
965 $deparse_failures = join('|', @deparse_failures);
966 $deparse_failures = qr/^(?:$deparse_failures)$/;
968 $deparse_skips = join('|', @deparse_skips);
969 $deparse_skips = qr/^(?:$deparse_skips)$/;
972 # ex: set ts=8 sts=4 sw=4 noet: