2 # Makefile to build perl on Windows NT using Microsoft NMAKE.
4 # Visual C++ 2.0 through 6.0 (and possibly newer versions)
5 # MS Platform SDK 64-bit compiler and tools **experimental**
7 # This is set up to build a perl.exe that runs off a shared library
8 # (perl59.dll). Also makes individual DLLs for the XS extensions.
12 ## Make sure you read README.win32 *before* you mess with anything here!
16 ## Build configuration. Edit the values below to suit your needs.
20 # Set these to wherever you want "nmake install" to put your
24 INST_TOP = $(INST_DRV)\perl
27 # Comment this out if you DON'T want your perl installation to be versioned.
28 # This means that the new installation will overwrite any files from the
29 # old installation at the same INST_TOP location. Leaving it enabled is
30 # the safest route, as perl adds the extra version directory to all the
31 # locations it installs files to. If you disable it, an alternative
32 # versioned installation can be obtained by setting INST_TOP above to a
33 # path that includes an arbitrary version string.
38 # Comment this out if you DON'T want your perl installation to have
39 # architecture specific components. This means that architecture-
40 # specific files will be installed along with the architecture-neutral
41 # files. Leaving it enabled is safer and more flexible, in case you
42 # want to build multiple flavors of perl and install them together in
43 # the same location. Commenting it out gives you a simpler
44 # installation that is easier to understand for beginners.
46 #INST_ARCH = \$(ARCHNAME)
49 # uncomment to enable multiple interpreters. This is need for fork()
50 # emulation and for thread support.
55 # Beginnings of interpreter cloning/threads; now reasonably complete.
56 # This should be enabled to get the fork() emulation. This needs
62 # uncomment to enable the implicit "host" layer for all system calls
63 # made by perl. This needs USE_MULTI above. This is also needed to
69 # Comment out next assign to disable perl's I/O subsystem and use compiler's
70 # stdio for IO - depending on your compiler vendor and run time library you may
71 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
72 # You will also be unable to take full advantage of perl5.8's support for multiple
73 # encodings and may see lower IO performance. You have been warned.
77 # Comment this out if you don't want to enable large file support for
78 # some reason. Should normally only be changed to maintain compatibility
79 # with an older release of perl.
80 USE_LARGE_FILES = define
83 # uncomment one of the following lines if you are using either
84 # Visual C++ 2.x or Visual C++ 6.x (aka Visual Studio 98)
90 # uncomment next line if you want debug version of perl (big,slow)
91 # If not enabled, we automatically try to use maximum optimization
92 # with all compilers that are known to have a working optimizer.
97 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
98 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
99 # This currently requires VC 5.0 with Service Pack 3 or later.
100 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
101 # and follow the directions in the package to install.
103 # Not recommended if you have VC 6.x and you're not running Windows 9x.
105 #USE_PERLCRT = define
108 # uncomment to enable linking with setargv.obj under the Visual C
109 # compiler. Setting this options enables perl to expand wildcards in
110 # arguments, but it may be harder to use alternate methods like
111 # File::DosGlob that are more powerful. This option is supported only with
114 #USE_SETARGV = define
117 # if you want to have the crypt() builtin function implemented, leave this or
118 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
119 # version of des_fcrypt().
124 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
125 # library, uncomment this, and make sure the library exists (see README.win32)
126 # Specify the full pathname of the library.
128 #CRYPT_LIB = fcrypt.lib
131 # set this if you wish to use perl's malloc
132 # WARNING: Turning this on/off WILL break binary compatibility with extensions
133 # you may have compiled with/without it. Be prepared to recompile all
134 # extensions if you change the default. Currently, this cannot be enabled
135 # if you ask for USE_IMP_SYS above.
137 #PERL_MALLOC = define
140 # set this to enable debugging mstats
141 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
142 # be enabled without PERL_MALLOC as well.
144 #DEBUG_MSTATS = define
148 # set the install locations of the compiler include/libraries
149 # Running VCVARS32.BAT is *required* when using Visual C.
150 # Some versions of Visual C don't define MSVCDIR in the environment,
151 # so you may have to set CCHOME explicitly (spaces in the path name should
156 CCINCDIR = $(CCHOME)\include
157 CCLIBDIR = $(CCHOME)\lib
160 # Additional compiler flags can be specified here.
164 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
165 # for old symbols by default, at the expense of extreme pollution. You most
166 # probably just want to build modules that won't compile with
167 # perl Makefile.PL POLLUTE=1
168 # instead of enabling this. Please report such modules to the respective
171 #BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE
174 # This should normally be disabled. Enabling it will disable the File::Glob
175 # implementation of CORE::glob.
177 #BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB
180 # This should normally be disabled. Enabling it causes perl to read scripts
181 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
182 #BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
185 # specify semicolon-separated list of extra directories that modules will
186 # look for libraries (spaces in path names need not be quoted)
191 # set this to your email address (perl will guess a value from
192 # from your loginname and your hostname, which may not be right)
197 ## Build configuration ends.
200 ##################### CHANGE THESE ONLY IF YOU MUST #####################
202 !IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
206 CRYPT_FLAG = -DHAVE_DES_FCRYPT
209 !IF "$(PERL_MALLOC)" == ""
214 !IF "$(DEBUG_MSTATS)" == ""
218 !IF "$(DEBUG_MSTATS)" == "define"
219 BUILDOPT = $(BUILDOPT) -DPERL_DEBUGGING_MSTATS
222 !IF "$(USE_IMP_SYS)" == "define"
226 !IF "$(USE_MULTI)" == ""
230 !IF "$(USE_ITHREADS)" == ""
234 !IF "$(USE_IMP_SYS)" == ""
238 !IF "$(USE_PERLIO)" == ""
242 !IF "$(USE_LARGE_FILES)" == ""
243 USE_LARGE_FILES = undef
246 !IF "$(USE_PERLCRT)" == ""
250 !IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
254 !IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
258 !IF "$(USE_MULTI)" != "undef"
259 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
262 !IF "$(USE_IMP_SYS)" != "undef"
263 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS
266 !IF "$(PROCESSOR_ARCHITECTURE)" == ""
267 PROCESSOR_ARCHITECTURE = x86
271 !IF "$(PROCESSOR_ARCHITEW6432)" != ""
272 PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432)
275 !IF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
283 !IF "$(USE_MULTI)" == "define"
284 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
286 !IF "$(USE_PERLIO)" == "define"
287 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
289 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
293 !IF "$(USE_PERLIO)" == "define"
294 BUILDOPT = $(BUILDOPT) -DUSE_PERLIO
297 !IF "$(USE_ITHREADS)" == "define"
298 ARCHNAME = $(ARCHNAME)-thread
301 # Visual Studio 98 specific
302 !IF "$(CCTYPE)" == "MSVC60"
304 # VC 6.0 can load the socket dll on demand. Makes the test suite
305 # run in about 10% less time.
306 DELAYLOAD = -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
309 ARCHDIR = ..\lib\$(ARCHNAME)
310 COREDIR = ..\lib\CORE
311 AUTODIR = ..\lib\auto
315 EXTUTILSDIR = $(LIBDIR)\ExtUtils
318 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
319 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
320 INST_LIB = $(INST_TOP)$(INST_VER)\lib
321 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
322 INST_COREDIR = $(INST_ARCHLIB)\CORE
323 INST_POD = $(INST_LIB)\pod
324 INST_HTML = $(INST_TOP)$(INST_VER)\html
327 # Programs to compile, build .lib files and link
332 LIB32 = $(LINK32) -lib
339 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
340 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
341 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
342 LOCDEFS = -DPERLDLL -DPERL_CORE
346 !IF "$(USE_PERLCRT)" != "define"
355 !IF "$(CFG)" == "Debug"
356 ! IF "$(CCTYPE)" == "MSVC20"
357 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
359 OPTIMIZE = -Od -MD -Zi -DDEBUGGING
363 OPTIMIZE = -MD -DNDEBUG
365 ! IF "$(WIN64)" == "define"
366 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
367 OPTIMIZE = $(OPTIMIZE) -Ox -GL
368 LINK_DBG = $(LINK_DBG) -ltcg
370 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
371 OPTIMIZE = $(OPTIMIZE) -O1
372 #OPTIMIZE = $(OPTIMIZE) -O2
376 !IF "$(WIN64)" == "define"
377 DEFINES = $(DEFINES) -DWIN64 -DCONSERVATIVE
378 OPTIMIZE = $(OPTIMIZE) -Wp64 -Op
381 !IF "$(USE_PERLCRT)" != "define"
382 BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX
385 LIBBASEFILES = $(CRYPT_LIB) \
386 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
387 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
388 netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
391 # win64 doesn't have some libs
392 !IF "$(WIN64)" != "define"
393 LIBBASEFILES = $(LIBBASEFILES) odbc32.lib odbccp32.lib
396 # we add LIBC here, since we may be using PerlCRT.dll
397 LIBFILES = $(LIBBASEFILES) $(LIBC)
399 CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
400 $(PCHFLAGS) $(OPTIMIZE)
401 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
402 -libpath:"$(INST_COREDIR)" \
403 -machine:$(PROCESSOR_ARCHITECTURE)
407 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
409 #################### do not edit below this line #######################
410 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
418 .SUFFIXES : .c $(o) .dll .lib .exe .rc .res
421 $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
427 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
428 -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
436 # makedef.pl must be updated if this changes, and this should normally
437 # only change when there is an incompatible revision of the public API.
438 PERLIMPLIB = ..\perl59.lib
439 PERLDLL = ..\perl59.dll
441 MINIPERL = ..\miniperl.exe
443 PERLEXE = ..\perl.exe
444 WPERLEXE = ..\wperl.exe
445 GLOBEXE = ..\perlglob.exe
446 CONFIGPM = ..\lib\Config.pm
447 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
450 # Nominate a target which causes extensions to be re-built
451 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
452 # on and really only the interface - i.e. the .def file used to export symbols
454 PERLDEP = perldll.def
456 PL2BAT = bin\pl2bat.pl
457 GLOBBAT = bin\perlglob.bat
497 !IF "$(WIN64)" == "define"
498 CFGSH_TMPL = config.vc64
499 CFGH_TMPL = config_H.vc64
501 CFGSH_TMPL = config.vc
502 CFGH_TMPL = config_H.vc
505 XCOPY = xcopy /f /r /i /d
506 RCOPY = xcopy /f /r /i /e /d
513 # filenames given to xsubpp must have forward slashes (since it puts
514 # full pathnames in #line strings)
515 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
554 EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c
556 !IF "$(PERL_MALLOC)" == "define"
557 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c
560 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c
567 # We need this for miniperl build unless we override canned
568 # config.h #define building mini\*
569 #!IF "$(USE_PERLIO)" == "define"
570 WIN32_SRC = $(WIN32_SRC) .\win32io.c
573 !IF "$(CRYPT_SRC)" != ""
574 WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)
577 DLL_SRC = $(DYNALOADER).c
623 .\include\sys\socket.h \
626 CORE_H = $(CORE_NOCFG_H) .\config.h
628 MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)
629 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
630 WIN32_OBJ = $(WIN32_SRC:.c=.obj)
631 MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \
632 $(MINIDIR)\miniperlmain$(o) \
633 $(MINIDIR)\perlio$(o)
634 MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\)
635 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
636 DLL_OBJ = $(DLL_SRC:.c=.obj)
637 X2P_OBJ = $(X2P_SRC:.c=.obj)
639 PERLDLL_OBJ = $(CORE_OBJ)
640 PERLEXE_OBJ = perlmain$(o)
642 PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
643 #PERLEXE_OBJ = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
645 !IF "$(USE_SETARGV)" != ""
646 SETARGV_OBJ = setargv$(o)
649 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
650 SOCKET = $(EXTDIR)\Socket\Socket
651 FCNTL = $(EXTDIR)\Fcntl\Fcntl
652 OPCODE = $(EXTDIR)\Opcode\Opcode
653 SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File
655 POSIX = $(EXTDIR)\POSIX\POSIX
656 ATTRS = $(EXTDIR)\attrs\attrs
657 THREAD = $(EXTDIR)\Thread\Thread
660 DUMPER = $(EXTDIR)\Data\Dumper\Dumper
661 ERRNO = $(EXTDIR)\Errno\Errno
662 PEEK = $(EXTDIR)\Devel\Peek\Peek
663 BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader
664 DPROF = $(EXTDIR)\Devel\DProf\DProf
665 GLOB = $(EXTDIR)\File\Glob\Glob
666 HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname
667 STORABLE = $(EXTDIR)\Storable\Storable
668 FILTER = $(EXTDIR)\Filter\Util\Call\Call
669 ENCODE = $(EXTDIR)\Encode\Encode
670 MD5 = $(EXTDIR)\Digest\MD5\MD5
671 PERLIOSCALAR = $(EXTDIR)\PerlIO\scalar\scalar
672 MIMEBASE64 = $(EXTDIR)\MIME\Base64\Base64
673 TIMEHIRES = $(EXTDIR)\Time\HiRes\HiRes
674 CWD = $(EXTDIR)\Cwd\Cwd
675 LISTUTIL = $(EXTDIR)\List\Util\Util
676 PERLIOVIA = $(EXTDIR)\PerlIO\via\via
677 XSAPITEST = $(EXTDIR)\XS\APItest\APItest
678 XSTYPEMAP = $(EXTDIR)\XS\Typemap\Typemap
679 UNICODENORMALIZE = $(EXTDIR)\Unicode\Normalize\Normalize
681 SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll
682 FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll
683 OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll
684 SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll
685 IO_DLL = $(AUTODIR)\IO\IO.dll
686 POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll
687 ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll
688 THREAD_DLL = $(AUTODIR)\Thread\Thread.dll
689 B_DLL = $(AUTODIR)\B\B.dll
690 DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll
691 PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll
692 RE_DLL = $(AUTODIR)\re\re.dll
693 BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll
694 DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll
695 GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll
696 HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll
697 STORABLE_DLL = $(AUTODIR)\Storable\Storable.dll
698 FILTER_DLL = $(AUTODIR)\Filter\Util\Call\Call.dll
699 ENCODE_DLL = $(AUTODIR)\Encode\Encode.dll
700 MD5_DLL = $(AUTODIR)\Digest\MD5\MD5.dll
701 PERLIOSCALAR_DLL = $(AUTODIR)\PerlIO\scalar\scalar.dll
702 MIMEBASE64_DLL = $(AUTODIR)\MIME\Base64\Base64.dll
703 TIMEHIRES_DLL = $(AUTODIR)\Time\HiRes\HiRes.dll
704 CWD_DLL = $(AUTODIR)\Cwd\Cwd.dll
705 LISTUTIL_DLL = $(AUTODIR)\List\Util\Util.dll
706 PERLIOVIA_DLL = $(AUTODIR)\PerlIO\via\via.dll
707 XSAPITEST_DLL = $(AUTODIR)\XS\APItest\APItest.dll
708 XSTYPEMAP_DLL = $(AUTODIR)\XS\Typemap\Typemap.dll
709 UNICODENORMALIZE_DLL = $(AUTODIR)\Unicode\Normalize\Normalize.dll
740 $(UNICODENORMALIZE).c
763 $(PERLIOSCALAR_DLL) \
771 $(UNICODENORMALIZE_DLL)
773 POD2HTML = $(PODDIR)\pod2html
774 POD2MAN = $(PODDIR)\pod2man
775 POD2LATEX = $(PODDIR)\pod2latex
776 POD2TEXT = $(PODDIR)\pod2text
779 "INST_DRV=$(INST_DRV)" \
780 "INST_TOP=$(INST_TOP)" \
781 "INST_VER=$(INST_VER)" \
782 "INST_ARCH=$(INST_ARCH)" \
783 "archname=$(ARCHNAME)" \
786 "ccflags=-nologo -Gf -W3 $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \
787 "cf_email=$(EMAIL)" \
788 "d_crypt=$(D_CRYPT)" \
789 "d_mymalloc=$(PERL_MALLOC)" \
791 "incpath=$(CCINCDIR:"=\")" \
792 "libperl=$(PERLIMPLIB:..\=)" \
793 "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
795 "make=$(MAKE_BARE)" \
796 "usethreads=$(USE_ITHREADS)" \
797 "useithreads=$(USE_ITHREADS)" \
798 "usemultiplicity=$(USE_MULTI)" \
799 "useperlio=$(USE_PERLIO)" \
800 "uselargefiles=$(USE_LARGE_FILES)" \
801 "LINK_FLAGS=$(LINK_FLAGS:"=\")" \
802 "optimize=$(OPTIMIZE:"=\")"
808 all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
810 @echo Everything is up to date. '$(MAKE_BARE) test' to run test suite.
812 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
814 #------------------------------------------------------------
816 $(GLOBEXE) : perlglob$(o)
817 $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
818 perlglob$(o) setargv$(o)
820 perlglob$(o) : perlglob.c
822 config.w32 : $(CFGSH_TMPL)
823 copy $(CFGSH_TMPL) config.w32
825 .\config.h : $(CFGH_TMPL)
827 copy $(CFGH_TMPL) config.h
829 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL
830 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
832 # this target is for when changes to the main config.sh happen
833 # edit config.{b,v,g}c and make this target once for each supported
834 # compiler (e.g. `nmake CCTYPE=BORLAND regen_config_h`)
836 perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
838 -del /f perl.exe perl*.dll
843 -perl config_h.PL "INST_VER=$(INST_VER)"
844 rename config.h $(CFGH_TMPL)
846 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
850 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
851 $(XCOPY) ..\*.h $(COREDIR)\*.*
852 $(XCOPY) *.h $(COREDIR)\*.*
853 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
854 $(RCOPY) include $(COREDIR)\*.*
855 -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"
856 if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
858 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
859 $(LINK32) -subsystem:console -out:$@ @<<
860 $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
864 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
866 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
867 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c
869 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
870 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
872 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
873 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
874 !IF "$(USE_IMP_SYS)" == "define"
875 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
876 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
879 # 1. we don't want to rebuild miniperl.exe when config.h changes
880 # 2. we don't want to rebuild miniperl.exe with non-default config.h
881 $(MINI_OBJ) : $(CORE_NOCFG_H)
883 $(WIN32_OBJ) : $(CORE_H)
884 $(CORE_OBJ) : $(CORE_H)
885 $(DLL_OBJ) : $(CORE_H)
886 $(X2P_OBJ) : $(CORE_H)
888 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
889 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
890 CCTYPE=$(CCTYPE) > perldll.def
892 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
893 $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<<
894 $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
896 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
898 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
900 miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
903 ..\x2p\a2p$(o) : ..\x2p\a2p.c
904 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
906 ..\x2p\hash$(o) : ..\x2p\hash.c
907 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
909 ..\x2p\str$(o) : ..\x2p\str.c
910 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
912 ..\x2p\util$(o) : ..\x2p\util.c
913 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
915 ..\x2p\walk$(o) : ..\x2p\walk.c
916 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
918 $(X2P) : $(MINIPERL) $(X2P_OBJ)
919 $(MINIPERL) ..\x2p\find2perl.PL
920 $(MINIPERL) ..\x2p\s2p.PL
921 $(LINK32) -subsystem:console -out:$@ @<<
922 $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
925 perlmain.c : runperl.c
926 copy runperl.c perlmain.c
928 perlmain$(o) : perlmain.c
929 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
931 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
932 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
933 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
934 copy $(PERLEXE) $(WPERLEXE)
935 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
937 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
939 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
940 if not exist $(AUTODIR) mkdir $(AUTODIR)
942 ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
943 ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
945 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
946 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
948 $(XSUBPP) dl_win32.xs > $(*B).c
951 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
952 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
954 #----------------------------------------------------------------------------------
955 Extensions: buildext.pl $(PERLDEP) $(CONFIGPM)
956 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
959 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
961 #----------------------------------------------------------------------------------
964 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
965 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
966 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
968 utils: $(PERLEXE) $(X2P)
970 $(MAKE) PERL=$(MINIPERL)
972 copy ..\README.aix .\perlaix.pod
973 copy ..\README.amiga .\perlamiga.pod
974 copy ..\README.apollo .\perlapollo.pod
975 copy ..\README.beos .\perlbeos.pod
976 copy ..\README.bs2000 .\perlbs2000.pod
977 copy ..\README.ce .\perlce.pod
978 copy ..\README.cn .\perlcn.pod
979 copy ..\README.cygwin .\perlcygwin.pod
980 copy ..\README.dgux .\perldgux.pod
981 copy ..\README.dos .\perldos.pod
982 copy ..\README.epoc .\perlepoc.pod
983 copy ..\README.freebsd .\perlfreebsd.pod
984 copy ..\README.hpux .\perlhpux.pod
985 copy ..\README.hurd .\perlhurd.pod
986 copy ..\README.irix .\perlirix.pod
987 copy ..\README.jp .\perljp.pod
988 copy ..\README.ko .\perlko.pod
989 copy ..\README.machten .\perlmachten.pod
990 copy ..\README.macos .\perlmacos.pod
991 copy ..\README.macosx .\perlmacosx.pod
992 copy ..\README.mint .\perlmint.pod
993 copy ..\README.mpeix .\perlmpeix.pod
994 copy ..\README.netware .\perlnetware.pod
995 copy ..\README.os2 .\perlos2.pod
996 copy ..\README.os390 .\perlos390.pod
997 copy ..\README.os400 .\perlos400.pod
998 copy ..\README.plan9 .\perlplan9.pod
999 copy ..\README.qnx .\perlqnx.pod
1000 copy ..\README.solaris .\perlsolaris.pod
1001 copy ..\README.tru64 .\perltru64.pod
1002 copy ..\README.tw .\perltw.pod
1003 copy ..\README.uts .\perluts.pod
1004 copy ..\README.vmesa .\perlvmesa.pod
1005 copy ..\README.vms .\perlvms.pod
1006 copy ..\README.vos .\perlvos.pod
1007 copy ..\README.win32 .\perlwin32.pod
1008 copy ..\vms\perlvms.pod .\perlvms.pod
1009 $(MAKE) -f ..\win32\pod.mak converters
1011 $(PERLEXE) lib_pm.PL
1013 $(PERLEXE) $(PL2BAT) $(UTILS)
1015 # the doubled rmdir calls are needed because older cmd shells
1016 # don't understand /q
1018 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1019 $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
1021 -del /f $(EXTENSION_DLL)
1022 -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
1023 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1024 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1025 -del /f $(LIBDIR)\XSLoader.pm
1026 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1027 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1028 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1029 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1030 -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
1031 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1032 -del /f $(LIBDIR)\File\Glob.pm
1033 -del /f $(LIBDIR)\Storable.pm
1034 -del /f $(LIBDIR)\Filter\Util\Call.pm
1035 -del /f $(LIBDIR)\Digest\MD5.pm
1036 -del /f $(LIBDIR)\PerlIO\scalar.pm
1037 -del /f $(LIBDIR)\PerlIO\via.pm
1038 -del /f $(LIBDIR)\MIME\Base64.pm
1039 -del /f $(LIBDIR)\MIME\QuotedPrint.pm
1040 -del /f $(LIBDIR)\List\Util.pm
1041 -del /f $(LIBDIR)\Scalar\Util.pm
1042 -del /f $(LIBDIR)\Time\HiRes.pm
1043 -del /f $(LIBDIR)\XS\APItest.pm
1044 -del /f $(LIBDIR)\XS\Typemap.pm
1045 -del /f $(LIBDIR)\Unicode\Normalize.pm
1046 -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
1047 -if exist $(LIBDIR)\IO rmdir /s $(LIBDIR)\IO
1048 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1049 -if exist $(LIBDIR)\B rmdir /s $(LIBDIR)\B
1050 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1051 -if exist $(LIBDIR)\Data rmdir /s $(LIBDIR)\Data
1052 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1053 -if exist $(LIBDIR)\Filter\Util rmdir /s $(LIBDIR)\Filter\Util
1054 -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest
1055 -if exist $(LIBDIR)\Digest rmdir /s $(LIBDIR)\Digest
1056 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1057 -if exist $(LIBDIR)\MIME rmdir /s $(LIBDIR)\MIME
1058 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1059 -if exist $(LIBDIR)\List rmdir /s $(LIBDIR)\List
1060 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1061 -if exist $(LIBDIR)\Scalar rmdir /s $(LIBDIR)\Scalar
1062 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1063 -if exist $(LIBDIR)\XS rmdir /s $(LIBDIR)\XS
1065 -del /f *.html *.bat checkpods \
1066 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1067 perlbs2000.pod perlce.pod perlcygwin.pod perldgux.pod \
1068 perldos.pod perlepoc.pod perlfreebsd.pod perlhurd.pod \
1069 perlhpux.pod perlirix.pod perlmachten.pod \
1070 perlmacos.pod perlmint.pod perlmpeix.pod perlnetware.pod \
1071 perlos2.pod perlos390.pod perlos400.pod perlplan9.pod \
1072 perlqnx.pod perlsolaris.pod perltru64.pod perluts.pod \
1073 perlvmesa.pod perlvms.pod perlvos.pod \
1074 perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \
1075 podchecker podselect
1077 -del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs perldoc perlivp \
1078 dprofpp perlcc libnetcfg enc2xs piconv cpan xsubpp instmodsh
1082 -del /f find2perl s2p psed
1085 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1089 -del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
1092 -del /s *.def Makefile Makefile.old
1094 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1095 -if exist $(AUTODIR) rmdir /s $(AUTODIR)
1096 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1097 -if exist $(COREDIR) rmdir /s $(COREDIR)
1099 install : all installbare installhtml
1102 $(PERLEXE) ..\installperl
1103 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1104 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1105 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1108 $(RCOPY) html\*.* $(INST_HTML)\*.*
1110 inst_lib : $(CONFIGPM)
1111 copy splittree.pl ..
1112 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1113 $(RCOPY) ..\lib $(INST_LIB)\*.*
1115 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
1116 $(XCOPY) $(MINIPERL) ..\t\perl.exe
1117 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1121 $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1124 test-prep : all utils
1125 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1126 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1127 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1131 $(PERLEXE) -I..\lib harness
1134 test-notty : test-prep
1135 set PERL_SKIP_TTY_TEST=1
1137 $(PERLEXE) -I..\lib harness
1141 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1142 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1143 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1145 $(PERLEXE) -I..\lib harness
1148 clean : Extensions_clean
1149 -@$(DEL) miniperlmain$(o)
1150 -@$(DEL) $(MINIPERL)
1151 -@$(DEL) perlglob$(o)
1152 -@$(DEL) perlmain$(o)
1157 -@$(DEL) $(WPERLEXE)
1159 -@$(DEL) $(CORE_OBJ)
1160 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1161 -if exist $(MINIDIR) rmdir /s $(MINIDIR)
1162 -@$(DEL) $(WIN32_OBJ)
1165 -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
1166 -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat
1167 -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat
1171 # Handy way to run perlbug -ok without having to install and run the
1172 # installed perlbug. We don't re-run the tests here - we trust the user.
1173 # Please *don't* use this unless all tests pass.
1174 # If you want to report test failures, use "nmake nok" instead.
1176 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1179 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1182 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1185 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok