This is a live mirror of the Perl 5 development currently hosted at https://github.com/perl/perl5
test in change#4428 needs strict interpretation of C modulus
[perl5.git] / t / op / numconvert.t
1 #!./perl
2
3 #
4 # test the conversion operators
5 #
6 # Notations:
7 #
8 # "N p i N vs N N":  Apply op-N, then op-p, then op-i, then reporter-N
9 # Compare with application of op-N, then reporter-N
10 # Right below are descriptions of different ops and reporters.
11
12 # We do not use these subroutines any more, sub overhead makes a "switch"
13 # solution better:
14
15 # obviously, 0, 1 and 2, 3 are destructive.  (XXXX 64-bit? 4 destructive too)
16
17 # *0 = sub {--$_[0]};           # -
18 # *1 = sub {++$_[0]};           # +
19
20 # # Converters
21 # *2 = sub { $_[0] = $max_uv & $_[0]}; # U
22 # *3 = sub { use integer; $_[0] += $zero}; # I
23 # *4 = sub { $_[0] += $zero};   # N
24 # *5 = sub { $_[0] = "$_[0]" }; # P
25
26 # # Side effects
27 # *6 = sub { $max_uv & $_[0]};  # u
28 # *7 = sub { use integer; $_[0] + $zero};       # i
29 # *8 = sub { $_[0] + $zero};    # n
30 # *9 = sub { $_[0] . "" };      # p
31
32 # # Reporters
33 # sub a2 { sprintf "%u", $_[0] }        # U
34 # sub a3 { sprintf "%d", $_[0] }        # I
35 # sub a4 { sprintf "%g", $_[0] }        # N
36 # sub a5 { "$_[0]" }            # P
37
38 BEGIN {
39     chdir 't' if -d 't';
40     @INC = '../lib';
41 }
42
43 use strict 'vars';
44
45 my $max_chain = $ENV{PERL_TEST_NUMCONVERTS} || 2;
46
47 # Bulk out if unsigned type is hopelessly wrong:
48 my $max_uv1 = ~0;
49 my $max_uv2 = sprintf "%u", $max_uv1 ** 6; # 6 is an arbitrary number here
50 my $big_iv = do {use integer; $max_uv1 * 16}; # 16 is an arbitrary number here
51
52 if ($max_uv1 ne $max_uv2 or $big_iv > $max_uv1) {
53   print "1..0\n# Unsigned arithmetic is not sane\n";
54   exit 0;
55 }
56
57 my $st_t = 4*4;                 # We try 4 initializers and 4 reporters
58
59 my $num = 0;
60 $num += 10**$_ - 4**$_ for 1.. $max_chain;
61 $num *= $st_t;
62 print "1..$num\n";              # In fact 15 times more subsubtests...
63
64 my $max_uv = ~0;
65 my $max_iv = int($max_uv/2);
66 my $zero = 0;
67
68 my $l_uv = length $max_uv;
69 my $l_iv = length $max_iv;
70
71 # Hope: the first digits are good
72 my $larger_than_uv = substr 97 x 100, 0, $l_uv;
73 my $smaller_than_iv = substr 12 x 100, 0, $l_iv;
74 my $yet_smaller_than_iv = substr 97 x 100, 0, ($l_iv - 1);
75
76 my @list = (1, $yet_smaller_than_iv, $smaller_than_iv, $max_iv, $max_iv + 1,
77             $max_uv, $max_uv + 1);
78 unshift @list, (reverse map -$_, @list), 0; # 15 elts
79 @list = map "$_", @list; # Normalize
80
81 # print "@list\n";
82
83
84 my @opnames = split //, "-+UINPuinp";
85
86 # @list = map { 2->($_), 3->($_), 4->($_), 5->($_),  } @list; # Prepare input
87
88 #print "@list\n";
89 #print "'@ops'\n";
90
91 my $test = 1;
92 my $nok;
93 for my $num_chain (1..$max_chain) {
94   my @ops = map [split //], grep /[4-9]/,
95     map { sprintf "%0${num_chain}d", $_ }  0 .. 10**$num_chain - 1;
96
97   #@ops = ([]) unless $num_chain;
98   #@ops = ([6, 4]);
99
100   # print "'@ops'\n";
101   for my $op (@ops) {
102     for my $first (2..5) {
103       for my $last (2..5) {
104         $nok = 0;
105         my @otherops = grep $_ <= 3, @$op;
106         my @curops = ($op,\@otherops);
107
108         for my $num (@list) {
109           my $inpt;
110           my @ans;
111
112           for my $short (0, 1) {
113             # undef $inpt;      # Forget all we had - some bugs were masked
114
115             $inpt = $num;       # Try to not contaminate $num...
116             $inpt = "$inpt";
117             if ($first == 2) {
118               $inpt = $max_uv & $inpt; # U 2
119             } elsif ($first == 3) {
120               use integer; $inpt += $zero; # I 3
121             } elsif ($first == 4) {
122               $inpt += $zero;   # N 4
123             } else {
124               $inpt = "$inpt";  # P 5
125             }
126
127             # Saves 20% of time - not with this logic:
128             #my $tmp = $inpt;
129             #my $tmp1 = $num;
130             #next if $num_chain > 1
131             #  and "$tmp" ne "$tmp1"; # Already the coercion gives problems...
132
133             for my $curop (@{$curops[$short]}) {
134               if ($curop < 5) {
135                 if ($curop < 3) {
136                   if ($curop == 0) {
137                     --$inpt;    # - 0
138                   } elsif ($curop == 1) {
139                     ++$inpt;    # + 1
140                   } else {
141                     $inpt = $max_uv & $inpt; # U 2
142                   }
143                 } elsif ($curop == 3) {
144                   use integer; $inpt += $zero;
145                 } else {
146                   $inpt += $zero; # N 4
147                 }
148               } elsif ($curop < 8) {
149                 if ($curop == 5) {
150                   $inpt = "$inpt"; # P 5
151                 } elsif ($curop == 6) {
152                   $max_uv & $inpt; # u 6
153                 } else {
154                   use integer; $inpt + $zero;
155                 }
156               } elsif ($curop == 8) {
157                 $inpt + $zero;  # n 8
158               } else {
159                 $inpt . "";     # p 9
160               }
161             }
162
163             if ($last == 2) {
164               $inpt = sprintf "%u", $inpt; # U 2
165             } elsif ($last == 3) {
166               $inpt = sprintf "%d", $inpt; # I 3
167             } elsif ($last == 4) {
168               $inpt = sprintf "%g", $inpt; # N 4
169             } else {
170               $inpt = "$inpt";  # P 5
171             }
172             push @ans, $inpt;
173           }
174           $nok++,
175             print "# '$ans[0]' ne '$ans[1]',\t$num\t=> @opnames[$first,@{$curops[0]},$last] vs @opnames[$first,@{$curops[1]},$last]\n"
176               if $ans[0] ne $ans[1];
177         }
178         print "not " if $nok;
179         print "ok $test\n";
180         #print $txt if $nok;
181         $test++;
182       }
183     }
184   }
185 }