2 # Makefile to build perl on Windows using Microsoft NMAKE.
4 # Microsoft Visual C++ 6.0 or later
5 # Windows SDK 64-bit compiler and tools
7 # This is set up to build a perl.exe that runs off a shared library
8 # (perl513.dll). Also makes individual DLLs for the XS extensions.
12 ## Make sure you read README.win32 *before* you mess with anything here!
16 ## Build configuration. Edit the values below to suit your needs.
20 # Set these to wherever you want "nmake install" to put your
24 INST_TOP = $(INST_DRV)\perl
27 # Uncomment if you want to build a 32-bit Perl using a 32-bit compiler
28 # on a 64-bit version of Windows.
32 # Comment this out if you DON'T want your perl installation to be versioned.
33 # This means that the new installation will overwrite any files from the
34 # old installation at the same INST_TOP location. Leaving it enabled is
35 # the safest route, as perl adds the extra version directory to all the
36 # locations it installs files to. If you disable it, an alternative
37 # versioned installation can be obtained by setting INST_TOP above to a
38 # path that includes an arbitrary version string.
43 # Comment this out if you DON'T want your perl installation to have
44 # architecture specific components. This means that architecture-
45 # specific files will be installed along with the architecture-neutral
46 # files. Leaving it enabled is safer and more flexible, in case you
47 # want to build multiple flavors of perl and install them together in
48 # the same location. Commenting it out gives you a simpler
49 # installation that is easier to understand for beginners.
51 #INST_ARCH = \$(ARCHNAME)
54 # Uncomment this if you want perl to run
55 # $Config{sitelibexp}\sitecustomize.pl
56 # before anything else. This script can then be set up, for example,
57 # to add additional entries to @INC.
59 #USE_SITECUST = define
62 # uncomment to enable multiple interpreters. This is need for fork()
63 # emulation and for thread support.
68 # Beginnings of interpreter cloning/threads; now reasonably complete.
69 # This should be enabled to get the fork() emulation. This needs
75 # uncomment to enable the implicit "host" layer for all system calls
76 # made by perl. This needs USE_MULTI above. This is also needed to
82 # Comment out next assign to disable perl's I/O subsystem and use compiler's
83 # stdio for IO - depending on your compiler vendor and run time library you may
84 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
85 # You will also be unable to take full advantage of perl5.8's support for multiple
86 # encodings and may see lower IO performance. You have been warned.
90 # Comment this out if you don't want to enable large file support for
91 # some reason. Should normally only be changed to maintain compatibility
92 # with an older release of perl.
93 USE_LARGE_FILES = define
96 # uncomment exactly one of the following
98 # Visual C++ 6.x (aka Visual C++ 98)
100 # Visual C++ Toolkit 2003 (aka Visual C++ 7.x) (free command-line tools)
102 # Visual C++ .NET 2003 (aka Visual C++ 7.x) (full version)
104 # Windows Server 2003 SP1 Platform SDK (April 2005)
106 # Visual C++ 2005 Express Edition (aka Visual C++ 8.x) (free version)
108 # Visual C++ 2005 (aka Visual C++ 8.x) (full version)
110 # Visual C++ 2008 Express Edition (aka Visual C++ 9.x) (free version)
112 # Visual C++ 2008 (aka Visual C++ 9.x) (full version)
116 # uncomment next line if you want debug version of perl (big,slow)
117 # If not enabled, we automatically try to use maximum optimization
118 # with all compilers that are known to have a working optimizer.
123 # uncomment to enable linking with setargv.obj under the Visual C
124 # compiler. Setting this options enables perl to expand wildcards in
125 # arguments, but it may be harder to use alternate methods like
126 # File::DosGlob that are more powerful. This option is supported only with
129 #USE_SETARGV = define
132 # if you want to have the crypt() builtin function implemented, leave this or
133 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
134 # version of des_fcrypt().
139 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
140 # library, uncomment this, and make sure the library exists (see README.win32)
141 # Specify the full pathname of the library.
143 #CRYPT_LIB = fcrypt.lib
146 # set this if you wish to use perl's malloc
147 # WARNING: Turning this on/off WILL break binary compatibility with extensions
148 # you may have compiled with/without it. Be prepared to recompile all
149 # extensions if you change the default. Currently, this cannot be enabled
150 # if you ask for USE_IMP_SYS above.
152 #PERL_MALLOC = define
155 # set this to enable debugging mstats
156 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
157 # be enabled without PERL_MALLOC as well.
159 #DEBUG_MSTATS = define
162 # set this to additionally provide a statically linked perl-static.exe.
163 # Note that dynamic loading will not work with this perl, so you must
164 # include required modules statically using the STATIC_EXT or ALL_STATIC
165 # variables below. A static library perl513s.lib will also be created.
166 # Ordinary perl.exe is not affected by this option.
168 #BUILD_STATIC = define
171 # in addition to BUILD_STATIC the option ALL_STATIC makes *every*
172 # extension get statically built
173 # This will result in a very large perl executable, but the main purpose
174 # is to have proper linking set so as to be able to create miscellaneous
175 # executables with different built-in extensions
181 # set the install locations of the compiler include/libraries
182 # Running VCVARS32.BAT is *required* when using Visual C.
183 # Some versions of Visual C don't define MSVCDIR in the environment,
184 # so you may have to set CCHOME explicitly (spaces in the path name should
188 CCINCDIR = $(CCHOME)\include
189 CCLIBDIR = $(CCHOME)\lib
192 # Additional compiler flags can be specified here.
194 BUILDOPT = $(BUILDOPTEXTRA)
197 # Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
198 # internal hash function unless the PERL_HASH_SEED environment variable is set.
199 # Alternatively, adding -DNO_HASH_SEED will completely disable the
200 # randomization feature.
201 # The latter is required to maintain binary compatibility with Perl 5.8.0.
203 #BUILDOPT = $(BUILDOPT) -DPERL_HASH_SEED_EXPLICIT
204 #BUILDOPT = $(BUILDOPT) -DNO_HASH_SEED
207 # This should normally be disabled. Enabling it will disable the File::Glob
208 # implementation of CORE::glob.
210 #BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB
213 # This should normally be disabled. Enabling it causes perl to read scripts
214 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
216 #BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
219 # specify semicolon-separated list of extra directories that modules will
220 # look for libraries (spaces in path names need not be quoted)
225 # set this to your email address (perl will guess a value from
226 # from your loginname and your hostname, which may not be right)
231 ## Build configuration ends.
234 ##################### CHANGE THESE ONLY IF YOU MUST #####################
236 !IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
240 CRYPT_FLAG = -DHAVE_DES_FCRYPT
243 !IF "$(USE_IMP_SYS)" == "define"
248 !IF "$(PERL_MALLOC)" == ""
253 !IF "$(DEBUG_MSTATS)" == ""
257 !IF "$(DEBUG_MSTATS)" == "define"
258 BUILDOPT = $(BUILDOPT) -DPERL_DEBUGGING_MSTATS
261 !IF "$(USE_SITECUST)" == ""
265 !IF "$(USE_MULTI)" == ""
269 !IF "$(USE_ITHREADS)" == ""
273 !IF "$(USE_IMP_SYS)" == ""
277 !IF "$(USE_PERLIO)" == ""
281 !IF "$(USE_LARGE_FILES)" == ""
282 USE_LARGE_FILES = undef
285 !IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
289 !IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
293 !IF "$(USE_SITECUST)" == "define"
294 BUILDOPT = $(BUILDOPT) -DUSE_SITECUSTOMIZE
297 !IF "$(USE_MULTI)" != "undef"
298 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
301 !IF "$(USE_IMP_SYS)" != "undef"
302 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS
305 !IF "$(PROCESSOR_ARCHITECTURE)" == ""
306 PROCESSOR_ARCHITECTURE = x86
310 # When we are running from a 32bit cmd.exe on AMD64 then
311 # PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432
313 !IF "$(PROCESSOR_ARCHITEW6432)" != ""
314 PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432)
317 !IF "$(PROCESSOR_ARCHITECTURE)" == "AMD64" || "$(PROCESSOR_ARCHITECTURE)" == "IA64"
325 # Treat 64-bit MSVC60 (doesn't really exist) as SDK2003SP1 because
326 # both link against MSVCRT.dll (which is part of Windows itself) and
327 # not against a compiler specific versioned runtime.
328 !IF "$(WIN64)" == "define" && "$(CCTYPE)" == "MSVC60"
332 ARCHITECTURE = $(PROCESSOR_ARCHITECTURE)
333 !IF "$(ARCHITECTURE)" == "AMD64"
336 !IF "$(ARCHITECTURE)" == "IA64"
340 !IF "$(USE_MULTI)" == "define"
341 ARCHNAME = MSWin32-$(ARCHITECTURE)-multi
343 !IF "$(USE_PERLIO)" == "define"
344 ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio
346 ARCHNAME = MSWin32-$(ARCHITECTURE)
350 !IF "$(USE_PERLIO)" == "define"
351 BUILDOPT = $(BUILDOPT) -DUSE_PERLIO
354 !IF "$(USE_ITHREADS)" == "define"
355 ARCHNAME = $(ARCHNAME)-thread
358 # Visual C++ 98, .NET 2003, 2005 and 2008 specific.
359 # VC++ 6.x, 7.x, 8.x and 9.x can load DLL's on demand. Makes the test suite run
360 # in about 10% less time. (The free version of 7.x can't do this, but the free
361 # versions of 8.x and 9.x can.)
362 !IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70" || \
363 "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
364 "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE"
365 DELAYLOAD = -DELAYLOAD:ws2_32.dll delayimp.lib
368 # Visual C++ 2005 and 2008 (VC++ 8.x and 9.x) create manifest files for EXEs and
369 # DLLs. These either need copying everywhere with the binaries, or else need
370 # embedding in them otherwise MSVCR80.dll or MSVCR90.dll won't be found. For
371 # simplicity, embed them if they exist (and delete them afterwards so that they
372 # don't get installed too).
373 EMBED_EXE_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1 && \
374 if exist $@.manifest del $@.manifest
375 EMBED_DLL_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2 && \
376 if exist $@.manifest del $@.manifest
378 ARCHDIR = ..\lib\$(ARCHNAME)
379 COREDIR = ..\lib\CORE
380 AUTODIR = ..\lib\auto
386 EXTUTILSDIR = $(LIBDIR)\ExtUtils
390 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
391 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
392 INST_LIB = $(INST_TOP)$(INST_VER)\lib
393 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
394 INST_COREDIR = $(INST_ARCHLIB)\CORE
395 INST_HTML = $(INST_TOP)$(INST_VER)\html
398 # Programs to compile, build .lib files and link
403 LIB32 = $(LINK32) -lib
410 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
411 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
412 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
413 LOCDEFS = -DPERLDLL -DPERL_CORE
419 !IF "$(CFG)" == "Debug"
420 OPTIMIZE = -Od -MD -Zi -DDEBUGGING
423 OPTIMIZE = -MD -Zi -DNDEBUG
424 # we enable debug symbols in release builds also
425 LINK_DBG = -debug -opt:ref,icf
426 # you may want to enable this if you want COFF symbols in the executables
427 # in addition to the PDB symbols. The default Dr. Watson that ships with
428 # Windows can use the the former but not latter. The free WinDbg can be
429 # installed to get better stack traces from just the PDB symbols, so we
430 # avoid the bloat of COFF symbols by default.
431 #LINK_DBG = $(LINK_DBG) -debugtype:both
432 ! IF "$(WIN64)" == "define"
433 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
434 OPTIMIZE = $(OPTIMIZE) -Ox -GL
435 LINK_DBG = $(LINK_DBG) -ltcg
437 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
438 OPTIMIZE = $(OPTIMIZE) -O1
439 #OPTIMIZE = $(OPTIMIZE) -O2
443 !IF "$(WIN64)" == "define"
444 DEFINES = $(DEFINES) -DWIN64 -DCONSERVATIVE
445 OPTIMIZE = $(OPTIMIZE) -fp:precise
448 # For now, silence VC++ 8.x's and 9.x's warnings about "unsafe" CRT functions
449 # and POSIX CRT function names being deprecated.
450 !IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
451 "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE"
452 DEFINES = $(DEFINES) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE
455 # In VS 2005 (VC++ 8.0) Microsoft changes time_t from 32-bit to
456 # 64-bit, even in 32-bit mode. It also provides the _USE_32BIT_TIME_T
457 # preprocessor option to revert back to the old functionality for
458 # backward compatibility. We define this symbol here for older 32-bit
459 # compilers only (which aren't using it at all) for the sole purpose
460 # of getting it into $Config{ccflags}. That way if someone builds
461 # Perl itself with e.g. VC6 but later installs an XS module using VC8
462 # the time_t types will still be compatible.
463 !IF "$(WIN64)" == "undef"
464 ! IF "$(CCTYPE)" == "MSVC60" || \
465 "$(CCTYPE)" == "MSVC70" || "$(CCTYPE)" == "MSVC70FREE"
466 BUILDOPT = $(BUILDOPT) -D_USE_32BIT_TIME_T
470 # Use the MSVCRT read() fix only when using VC++ 6.x or earlier. Later
471 # versions use MSVCR70.dll, MSVCR71.dll, etc, which do not require the
473 !IF "$(CCTYPE)" == "MSVC60"
474 BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX
477 LIBBASEFILES = $(CRYPT_LIB) \
478 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
479 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
480 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
481 version.lib odbc32.lib odbccp32.lib comctl32.lib
483 # The 64 bit Windows Server 2003 SP1 SDK compilers link against MSVCRT.dll, which
484 # doesn't include the buffer overrun verification code used by the /GS switch.
485 # Since the code links against libraries that are compiled with /GS, this
486 # "security cookie verification" code must be included via bufferoverflow.lib.
487 !IF "$(WIN64)" == "define" && "$(CCTYPE)" == "SDK2003SP1"
488 LIBBASEFILES = $(LIBBASEFILES) bufferoverflowU.lib
491 LIBFILES = $(LIBBASEFILES) $(LIBC)
493 #EXTRACFLAGS = -nologo -GF -W4 -wd4127 -wd4706
494 EXTRACFLAGS = -nologo -GF -W3
495 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
496 $(PCHFLAGS) $(OPTIMIZE)
497 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
498 -libpath:"$(INST_COREDIR)" \
499 -machine:$(PROCESSOR_ARCHITECTURE)
504 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
506 !IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
507 "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE"
508 LINK_FLAGS = $(LINK_FLAGS) "/manifestdependency:type='Win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' processorArchitecture='*' publicKeyToken='6595b64144ccf1df' language='*'"
510 RSC_FLAGS = -DINCLUDE_MANIFEST
514 #################### do not edit below this line #######################
515 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
523 .SUFFIXES : .c $(o) .dll .lib .exe .rc .res
526 $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
532 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
533 -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
537 $(RSC) -i.. $(RSC_FLAGS) $<
542 # makedef.pl must be updated if this changes, and this should normally
543 # only change when there is an incompatible revision of the public API.
544 PERLIMPLIB = ..\perl513.lib
545 PERLSTATICLIB = ..\perl513s.lib
546 PERLDLL = ..\perl513.dll
548 MINIPERL = ..\miniperl.exe
550 PERLEXE = ..\perl.exe
551 WPERLEXE = ..\wperl.exe
552 PERLEXESTATIC = ..\perl-static.exe
553 GLOBEXE = ..\perlglob.exe
554 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
555 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
557 GENUUDMAP = ..\generate_uudmap.exe
558 !IF "$(BUILD_STATIC)" == "define"
564 # Unicode data files generated by mktables
565 FIRSTUNIFILE = ..\lib\unicore\Decomposition.pl
566 UNIDATAFILES = ..\lib\unicore\Decomposition.pl \
567 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
568 ..\lib\unicore\Heavy.pl ..\lib\unicore\mktables.lst \
569 ..\lib\unicore\TestProp.pl
571 # Directories of Unicode data files generated by mktables
572 UNIDATADIR1 = ..\lib\unicore\To
573 UNIDATADIR2 = ..\lib\unicore\lib
575 PERLEXE_MANIFEST= .\perlexe.manifest
576 PERLEXE_ICO = .\perlexe.ico
577 PERLEXE_RES = .\perlexe.res
580 # Nominate a target which causes extensions to be re-built
581 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
582 # on and really only the interface - i.e. the .def file used to export symbols
584 PERLDEP = perldll.def
586 PL2BAT = bin\pl2bat.pl
587 GLOBBAT = bin\perlglob.bat
603 ..\utils\config_data \
610 ..\utils\cpanp-run-perl \
634 !IF "$(WIN64)" == "define"
635 CFGSH_TMPL = config.vc64
636 CFGH_TMPL = config_H.vc64
638 CFGSH_TMPL = config.vc
639 CFGH_TMPL = config_H.vc
642 XCOPY = xcopy /f /r /i /d /y
643 RCOPY = xcopy /f /r /i /e /d /y
686 EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c
688 !IF "$(PERL_MALLOC)" == "define"
689 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c
692 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c
699 # We need this for miniperl build unless we override canned
700 # config.h #define building mini\*
701 #!IF "$(USE_PERLIO)" == "define"
702 WIN32_SRC = $(WIN32_SRC) .\win32io.c
705 !IF "$(CRYPT_SRC)" != ""
706 WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)
753 .\include\sys\socket.h \
756 CORE_H = $(CORE_NOCFG_H) .\config.h ..\git_version.h
758 UUDMAP_H = ..\uudmap.h
759 BITCOUNT_H = ..\bitcount.h
761 MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)
762 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
763 WIN32_OBJ = $(WIN32_SRC:.c=.obj)
764 MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \
765 $(MINIDIR)\miniperlmain$(o) \
766 $(MINIDIR)\perlio$(o)
767 MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\)
768 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
769 DLL_OBJ = $(DYNALOADER)
770 X2P_OBJ = $(X2P_SRC:.c=.obj)
771 GENUUDMAP_OBJ = $(GENUUDMAP:.exe=.obj)
773 PERLDLL_OBJ = $(CORE_OBJ)
774 PERLEXE_OBJ = perlmain$(o)
775 PERLEXEST_OBJ = perlmainst$(o)
777 PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
779 !IF "$(USE_SETARGV)" != ""
780 SETARGV_OBJ = setargv$(o)
783 !IF "$(ALL_STATIC)" == "define"
784 # some exclusions, unfortunately, until fixed:
785 # - Win32 extension contains overlapped symbols with win32.c (BUG!)
786 # - MakeMaker isn't capable enough for SDBM_File (smaller bug)
787 # - Encode (encoding search algorithm relies on shared library?)
788 STATIC_EXT = * !Win32 !SDBM_File !Encode
790 # specify static extensions here, for example:
791 #STATIC_EXT = Cwd Compress/Raw/Zlib
792 STATIC_EXT = Win32CORE
795 DYNALOADER = ..\DynaLoader$(o)
798 "INST_DRV=$(INST_DRV)" \
799 "INST_TOP=$(INST_TOP)" \
800 "INST_VER=$(INST_VER)" \
801 "INST_ARCH=$(INST_ARCH)" \
802 "archname=$(ARCHNAME)" \
805 "ccflags=$(EXTRACFLAGS) $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \
806 "cf_email=$(EMAIL)" \
807 "d_crypt=$(D_CRYPT)" \
808 "d_mymalloc=$(PERL_MALLOC)" \
810 "incpath=$(CCINCDIR:"=\")" \
811 "libperl=$(PERLIMPLIB:..\=)" \
812 "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
814 "make=$(MAKE_BARE)" \
815 "static_ext=$(STATIC_EXT)" \
816 "usethreads=$(USE_ITHREADS)" \
817 "useithreads=$(USE_ITHREADS)" \
818 "usemultiplicity=$(USE_MULTI)" \
819 "useperlio=$(USE_PERLIO)" \
820 "uselargefiles=$(USE_LARGE_FILES)" \
821 "usesitecustomize=$(USE_SITECUST)" \
822 "LINK_FLAGS=$(LINK_FLAGS:"=\")" \
823 "optimize=$(OPTIMIZE:"=\")"
825 ICWD = -I..\dist\Cwd -I..\dist\Cwd\lib
831 all : .\config.h ..\git_version.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) \
832 $(UNIDATAFILES) MakePPPort $(PERLEXE) $(X2P) Extensions_nonxs Extensions $(PERLSTATIC)
833 @echo Everything is up to date. '$(MAKE_BARE) test' to run test suite.
835 regnodes : ..\regnodes.h
837 ..\regcomp$(o) : ..\regnodes.h ..\regcharclass.h
839 ..\regexec$(o) : ..\regnodes.h ..\regcharclass.h
841 reonly : regnodes .\config.h ..\git_version.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) \
842 $(UNIDATAFILES) $(PERLEXE) $(X2P) Extensions_reonly
843 @echo Perl and 're' are up to date.
845 static: $(PERLEXESTATIC)
847 #------------------------------------------------------------
849 $(GLOBEXE) : perlglob$(o)
850 $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
851 perlglob$(o) setargv$(o)
854 perlglob$(o) : perlglob.c
856 config.w32 : $(CFGSH_TMPL)
857 copy $(CFGSH_TMPL) config.w32
859 .\config.h : $(CFGH_TMPL)
861 copy $(CFGH_TMPL) config.h
863 ..\git_version.h : $(MINIPERL) ..\make_patchnum.pl
865 miniperl -Ilib make_patchnum.pl
868 # make sure that we recompile perl.c if the git version changes
869 ..\perl$(o) : ..\git_version.h
871 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL
872 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
874 # this target is for when changes to the main config.sh happen.
875 # edit config.vc, then make perl in a minimal configuration (i.e. with MULTI,
876 # ITHREADS, IMP_SYS, LARGE_FILES, PERLIO and CRYPT off), then make this target
877 # to regenerate config_H.vc.
878 # repeat for config.vc64 and config_H.vc64 if you have a suitable build
879 # environment, otherwise hand-edit them to maintain the same differences with
880 # config.vc and config_H.vc as before.
881 # unfortunately, some further manual editing is also then required to restore all
882 # the special __GNUC__ handling that is otherwise lost.
884 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
885 $(MINIPERL) -I..\lib ..\configpm --chdir=..
887 -$(MINIPERL) -I..\lib $(ICWD) config_h.PL "INST_VER=$(INST_VER)"
888 rename config.h $(CFGH_TMPL)
890 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
891 $(MINIPERL) -I..\lib ..\configpm --chdir=..
892 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
893 $(XCOPY) ..\*.h $(COREDIR)\*.*
894 $(XCOPY) *.h $(COREDIR)\*.*
895 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
896 $(RCOPY) include $(COREDIR)\*.*
897 -$(MINIPERL) -I..\lib $(ICWD) config_h.PL "INST_VER=$(INST_VER)"
898 if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
900 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
901 $(LINK32) -subsystem:console -out:$@ @<<
902 $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
907 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
909 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
910 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ ..\$(*F).c
912 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
913 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
915 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
916 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
917 !IF "$(USE_IMP_SYS)" == "define"
918 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
919 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
922 # 1. we don't want to rebuild miniperl.exe when config.h changes
923 # 2. we don't want to rebuild miniperl.exe with non-default config.h
924 # 3. we can't have miniperl.exe depend on git_version.h, as miniperl creates it
925 $(MINI_OBJ) : $(CORE_NOCFG_H)
927 $(WIN32_OBJ) : $(CORE_H)
928 $(CORE_OBJ) : $(CORE_H)
929 $(DLL_OBJ) : $(CORE_H)
930 $(X2P_OBJ) : $(CORE_H)
932 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl create_perllibst_h.pl
933 $(MINIPERL) -I..\lib create_perllibst_h.pl
934 $(MINIPERL) -I..\lib -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
935 CCTYPE=$(CCTYPE) > perldll.def
937 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
938 $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @Extensions_static @<<
939 $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
942 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
944 $(PERLSTATICLIB): Extensions_static
945 $(LIB32) $(LIB_FLAGS) -out:$@ @Extensions_static @<<
948 $(XCOPY) $(PERLSTATICLIB) $(COREDIR)
950 $(PERLEXE_RES): perlexe.rc $(PERLEXE_MANIFEST) $(PERLEXE_ICO)
952 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
954 miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
957 ..\x2p\a2p$(o) : ..\x2p\a2p.c
958 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
960 ..\x2p\hash$(o) : ..\x2p\hash.c
961 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
963 ..\x2p\str$(o) : ..\x2p\str.c
964 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
966 ..\x2p\util$(o) : ..\x2p\util.c
967 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
969 ..\x2p\walk$(o) : ..\x2p\walk.c
970 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
972 $(X2P) : $(MINIPERL) $(X2P_OBJ) Extensions
973 $(MINIPERL) -I..\lib ..\x2p\find2perl.PL
974 $(MINIPERL) -I..\lib ..\x2p\s2p.PL
975 $(LINK32) -subsystem:console -out:$@ @<<
976 $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
980 $(MINIDIR)\globals$(o) : $(UUDMAP_H) $(BITCOUNT_H)
982 $(UUDMAP_H) $(BITCOUNT_H) : $(GENUUDMAP)
983 $(GENUUDMAP) $(UUDMAP_H) $(BITCOUNT_H)
985 $(GENUUDMAP) : $(GENUUDMAP_OBJ)
986 $(LINK32) -subsystem:console -out:$@ @<<
987 $(LINK_FLAGS) $(LIBFILES) $(GENUUDMAP_OBJ)
991 perlmain.c : runperl.c
992 copy runperl.c perlmain.c
994 perlmain$(o) : perlmain.c
995 $(CC) $(CFLAGS_O:-DPERLDLL=-UPERLDLL) $(OBJOUT_FLAG)$@ -c perlmain.c
997 perlmainst.c : runperl.c
998 copy runperl.c perlmainst.c
1000 perlmainst$(o) : perlmainst.c
1001 $(CC) $(CFLAGS_O) $(OBJOUT_FLAG)$@ -c perlmainst.c
1003 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1004 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
1005 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1007 copy $(PERLEXE) $(WPERLEXE)
1008 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1010 $(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES)
1011 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
1012 @Extensions_static $(PERLSTATICLIB) /PDB:NONE \
1013 $(LIBFILES) $(PERLEXEST_OBJ) $(SETARGV_OBJ) $(PERLEXE_RES)
1016 MakePPPort: $(MINIPERL) $(CONFIGPM) Extensions_nonxs
1017 $(MINIPERL) -I..\lib $(ICWD) ..\mkppport
1019 #-------------------------------------------------------------------------------
1020 # There's no direct way to mark a dependency on
1021 # DynaLoader.pm, so this will have to do
1022 Extensions: ..\make_ext.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
1023 $(XCOPY) ..\*.h $(COREDIR)\*.*
1024 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic
1026 Extensions_reonly: ..\make_ext.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
1027 $(XCOPY) ..\*.h $(COREDIR)\*.*
1028 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic +re
1030 Extensions_static : ..\make_ext.pl list_static_libs.pl $(PERLDEP) $(CONFIGPM)
1031 $(XCOPY) ..\*.h $(COREDIR)\*.*
1032 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --static
1033 $(MINIPERL) -I..\lib list_static_libs.pl > Extensions_static
1035 Extensions_nonxs: ..\make_ext.pl $(PERLDEP) $(CONFIGPM)
1036 $(XCOPY) ..\*.h $(COREDIR)\*.*
1037 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --nonxs
1039 $(DYNALOADER) : ..\make_ext.pl $(PERLDEP) $(CONFIGPM) Extensions_nonxs
1040 $(XCOPY) ..\*.h $(COREDIR)\*.*
1041 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --dynaloader
1044 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=clean
1046 Extensions_realclean:
1047 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=realclean
1049 #-------------------------------------------------------------------------------
1051 doc: $(PERLEXE) ..\pod\perltoc.pod
1052 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
1053 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
1054 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1056 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1057 # so please check that script before making structural changes here
1059 utils: $(PERLEXE) $(X2P)
1061 $(MAKE) PERL=$(MINIPERL)
1063 copy ..\README.aix ..\pod\perlaix.pod
1064 copy ..\README.amiga ..\pod\perlamiga.pod
1065 copy ..\README.apollo ..\pod\perlapollo.pod
1066 copy ..\README.beos ..\pod\perlbeos.pod
1067 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1068 copy ..\README.ce ..\pod\perlce.pod
1069 copy ..\README.cn ..\pod\perlcn.pod
1070 copy ..\README.cygwin ..\pod\perlcygwin.pod
1071 copy ..\README.dgux ..\pod\perldgux.pod
1072 copy ..\README.dos ..\pod\perldos.pod
1073 copy ..\README.epoc ..\pod\perlepoc.pod
1074 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1075 copy ..\README.haiku ..\pod\perlhaiku.pod
1076 copy ..\README.hpux ..\pod\perlhpux.pod
1077 copy ..\README.hurd ..\pod\perlhurd.pod
1078 copy ..\README.irix ..\pod\perlirix.pod
1079 copy ..\README.jp ..\pod\perljp.pod
1080 copy ..\README.ko ..\pod\perlko.pod
1081 copy ..\README.linux ..\pod\perllinux.pod
1082 copy ..\README.macos ..\pod\perlmacos.pod
1083 copy ..\README.macosx ..\pod\perlmacosx.pod
1084 copy ..\README.mpeix ..\pod\perlmpeix.pod
1085 copy ..\README.netware ..\pod\perlnetware.pod
1086 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1087 copy ..\README.os2 ..\pod\perlos2.pod
1088 copy ..\README.os390 ..\pod\perlos390.pod
1089 copy ..\README.os400 ..\pod\perlos400.pod
1090 copy ..\README.plan9 ..\pod\perlplan9.pod
1091 copy ..\README.qnx ..\pod\perlqnx.pod
1092 copy ..\README.riscos ..\pod\perlriscos.pod
1093 copy ..\README.solaris ..\pod\perlsolaris.pod
1094 copy ..\README.symbian ..\pod\perlsymbian.pod
1095 copy ..\README.tru64 ..\pod\perltru64.pod
1096 copy ..\README.tw ..\pod\perltw.pod
1097 copy ..\README.uts ..\pod\perluts.pod
1098 copy ..\README.vmesa ..\pod\perlvmesa.pod
1099 copy ..\README.vos ..\pod\perlvos.pod
1100 copy ..\README.win32 ..\pod\perlwin32.pod
1101 copy ..\pod\perl5135delta.pod ..\pod\perldelta.pod
1102 $(MAKE) -f ..\win32\pod.mak converters
1104 $(PERLEXE) $(PL2BAT) $(UTILS)
1105 $(PERLEXE) $(ICWD) ..\autodoc.pl ..
1106 $(PERLEXE) $(ICWD) ..\pod\perlmodlib.pl -q
1108 ..\pod\perltoc.pod: $(PERLEXE) Extensions Extensions_nonxs
1109 $(PERLEXE) -f ..\pod\buildtoc --build-toc -q
1111 # Note that the pod cleanup in this next section is parsed (and regenerated
1112 # by pod/buildtoc so please check that script before making changes here
1114 distclean: realclean
1115 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1116 $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD) \
1117 $(PERLEXESTATIC) $(PERLSTATICLIB)
1119 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1120 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1121 -del /f $(LIBDIR)\.exists $(LIBDIR)\attributes.pm $(LIBDIR)\DynaLoader.pm
1122 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1123 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1124 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1125 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1126 -del /f $(LIBDIR)\File\Glob.pm
1127 -del /f $(LIBDIR)\Storable.pm
1128 -del /f $(LIBDIR)\Sys\Hostname.pm
1129 -del /f $(LIBDIR)\Time\HiRes.pm
1130 -del /f $(LIBDIR)\Unicode\Normalize.pm
1131 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1132 -del /f $(LIBDIR)\Win32.pm
1133 -del /f $(LIBDIR)\Win32CORE.pm
1134 -del /f $(LIBDIR)\Win32API\File.pm
1135 -del /f $(LIBDIR)\Win32API\File\cFile.pc
1136 -del /f $(DISTDIR)\XSLoader\XSLoader.pm
1137 -if exist $(LIBDIR)\App rmdir /s /q $(LIBDIR)\App
1138 -if exist $(LIBDIR)\Archive rmdir /s /q $(LIBDIR)\Archive
1139 -if exist $(LIBDIR)\Attribute rmdir /s /q $(LIBDIR)\Attribute
1140 -if exist $(LIBDIR)\autodie rmdir /s /q $(LIBDIR)\autodie
1141 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1142 -if exist $(LIBDIR)\CGI rmdir /s /q $(LIBDIR)\CGI
1143 -if exist $(LIBDIR)\CPAN rmdir /s /q $(LIBDIR)\CPAN
1144 -if exist $(LIBDIR)\CPANPLUS rmdir /s /q $(LIBDIR)\CPANPLUS
1145 -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
1146 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1147 -if exist $(LIBDIR)\Devel rmdir /s /q $(LIBDIR)\Devel
1148 -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest
1149 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1150 -if exist $(LIBDIR)\encoding rmdir /s /q $(LIBDIR)\encoding
1151 -if exist $(LIBDIR)\ExtUtils\CBuilder rmdir /s /q $(LIBDIR)\ExtUtils\CBuilder
1152 -if exist $(LIBDIR)\ExtUtils\Command rmdir /s /q $(LIBDIR)\ExtUtils\Command
1153 -if exist $(LIBDIR)\ExtUtils\Constant rmdir /s /q $(LIBDIR)\ExtUtils\Constant
1154 -if exist $(LIBDIR)\ExtUtils\Liblist rmdir /s /q $(LIBDIR)\ExtUtils\Liblist
1155 -if exist $(LIBDIR)\ExtUtils\MakeMaker rmdir /s /q $(LIBDIR)\ExtUtils\MakeMaker
1156 -if exist $(LIBDIR)\File\Spec rmdir /s /q $(LIBDIR)\File\Spec
1157 -if exist $(LIBDIR)\Filter rmdir /s /q $(LIBDIR)\Filter
1158 -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
1159 -if exist $(LIBDIR)\I18N\LangTags rmdir /s /q $(LIBDIR)\I18N\LangTags
1160 -if exist $(LIBDIR)\inc rmdir /s /q $(LIBDIR)\inc
1161 -if exist $(LIBDIR)\Module\Pluggable rmdir /s /q $(LIBDIR)\Module\Pluggable
1162 -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
1163 -if exist $(LIBDIR)\IPC rmdir /s /q $(LIBDIR)\IPC
1164 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1165 -if exist $(LIBDIR)\Locale rmdir /s /q $(LIBDIR)\Locale
1166 -if exist $(LIBDIR)\Log rmdir /s /q $(LIBDIR)\Log
1167 -if exist $(LIBDIR)\Math rmdir /s /q $(LIBDIR)\Math
1168 -if exist $(LIBDIR)\Memoize rmdir /s /q $(LIBDIR)\Memoize
1169 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1170 -if exist $(LIBDIR)\Module rmdir /s /q $(LIBDIR)\Module
1171 -if exist $(LIBDIR)\mro rmdir /s /q $(LIBDIR)\mro
1172 -if exist $(LIBDIR)\Net\FTP rmdir /s /q $(LIBDIR)\Net\FTP
1173 -if exist $(LIBDIR)\Object rmdir /s /q $(LIBDIR)\Object
1174 -if exist $(LIBDIR)\Package rmdir /s /q $(LIBDIR)\Package
1175 -if exist $(LIBDIR)\Params rmdir /s /q $(LIBDIR)\Params
1176 -if exist $(LIBDIR)\Parse rmdir /s /q $(LIBDIR)\Parse
1177 -if exist $(LIBDIR)\PerlIO rmdir /s /q $(LIBDIR)\PerlIO
1178 -if exist $(LIBDIR)\Pod\Perldoc rmdir /s /q $(LIBDIR)\Pod\Perldoc
1179 -if exist $(LIBDIR)\Pod\Simple rmdir /s /q $(LIBDIR)\Pod\Simple
1180 -if exist $(LIBDIR)\Pod\Text rmdir /s /q $(LIBDIR)\Pod\Text
1181 -if exist $(LIBDIR)\re rmdir /s /q $(LIBDIR)\re
1182 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1183 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1184 -if exist $(LIBDIR)\TAP rmdir /s /q $(LIBDIR)\TAP
1185 -if exist $(LIBDIR)\Term\UI rmdir /s /q $(LIBDIR)\Term\UI
1186 -if exist $(LIBDIR)\Test rmdir /s /q $(LIBDIR)\Test
1187 -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread
1188 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1189 -if exist $(LIBDIR)\Unicode\Collate rmdir /s /q $(LIBDIR)\Unicode\Collate
1190 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1191 -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
1192 -cd $(PODDIR) && del /f *.html *.bat \
1193 perlaix.pod perlamiga.pod perlapi.pod perlapollo.pod \
1194 perlbeos.pod perlbs2000.pod perlce.pod perlcn.pod \
1195 perlcygwin.pod perldelta.pod perldgux.pod perldos.pod \
1196 perlepoc.pod perlfreebsd.pod perlhaiku.pod perlhpux.pod \
1197 perlhurd.pod perlintern.pod perlirix.pod perljp.pod perlko.pod \
1198 perllinux.pod perlmacos.pod perlmacosx.pod perlmodlib.pod \
1199 perlmpeix.pod perlnetware.pod perlopenbsd.pod perlos2.pod \
1200 perlos390.pod perlos400.pod perlplan9.pod perlqnx.pod \
1201 perlriscos.pod perlsolaris.pod perlsymbian.pod perltoc.pod \
1202 perltru64.pod perltw.pod perluniprops.pod perluts.pod \
1203 perlvmesa.pod perlvos.pod perlwin32.pod \
1204 pod2html pod2latex pod2man pod2text pod2usage \
1205 podchecker podselect
1206 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1207 perldoc perlivp dprofpp libnetcfg enc2xs piconv cpan *.bat \
1208 xsubpp instmodsh prove ptar ptardiff cpanp-run-perl cpanp cpan2dist shasum corelist config_data
1209 -cd ..\x2p && del /f find2perl s2p psed *.bat
1210 -del /f ..\config.sh perlmain.c dlutils.c config.h.new \
1213 -del /f ..\lib\Config_git.pl
1216 -del /f $(PERLEXE_RES) perl.base
1217 -cd .. && del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib ppport.h
1218 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1219 -cd $(DISTDIR) && del /s *.def Makefile Makefile.old
1220 -cd $(CPANDIR) && del /s *.def Makefile Makefile.old
1221 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1222 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1223 -if exist pod2htmd.tmp del pod2htmd.tmp
1224 -if exist pod2htmi.tmp del pod2htmi.tmp
1225 -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
1226 -del /f ..\t\test_state
1228 install : all installbare installhtml
1230 installbare : utils ..\pod\perltoc.pod
1231 $(PERLEXE) ..\installperl
1232 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1233 if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\*.*
1234 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1235 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1236 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1237 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1240 $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*
1242 inst_lib : $(CONFIGPM)
1243 $(RCOPY) ..\lib $(INST_LIB)\*.*
1245 $(UNIDATAFILES) ..\pod\perluniprops.pod : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables Extensions_nonxs
1246 cd ..\lib\unicore && \
1247 ..\$(MINIPERL) -I.. -I..\..\dist\Cwd\lib -I..\..\dist\Cwd mktables -P ..\..\pod -maketest -makelist -p -check $@ $(FIRSTUNIFILE)
1249 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils $(UNIDATAFILES)
1250 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1251 if exist ..\t\perl.exe del /f ..\t\perl.exe
1252 rename ..\t\miniperl.exe perl.exe
1253 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1256 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1258 test-prep : all utils
1259 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1260 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1261 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1265 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1268 test-reonly : reonly utils
1269 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1270 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1271 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1273 $(PERLEXE) -I..\lib harness $(OPT) -re \bre\\/ $(EXTRA)
1281 test-notty : test-prep
1282 set PERL_SKIP_TTY_TEST=1
1284 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1288 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1289 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1290 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1292 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1296 -@$(DEL) miniperlmain$(o)
1297 -@$(DEL) $(MINIPERL)
1298 -@$(DEL) perlglob$(o)
1299 -@$(DEL) perlmain$(o)
1300 -@$(DEL) perlmainst$(o)
1303 -@$(DEL) ..\git_version.h
1306 -@$(DEL) $(WPERLEXE)
1307 -@$(DEL) $(PERLEXESTATIC)
1308 -@$(DEL) $(PERLSTATICLIB)
1310 -@$(DEL) $(CORE_OBJ)
1311 -@$(DEL) $(GENUUDMAP) $(GENUUDMAP_OBJ) $(UUDMAP_H) $(BITCOUNT_H)
1312 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1313 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1314 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1315 -@$(DEL) $(UNIDATAFILES)
1316 -@$(DEL) $(WIN32_OBJ)
1319 -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
1320 -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat
1321 -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat
1324 -@$(DEL) Extensions_static
1326 clean : Extensions_clean _clean
1328 realclean : Extensions_realclean _clean
1330 # Handy way to run perlbug -ok without having to install and run the
1331 # installed perlbug. We don't re-run the tests here - we trust the user.
1332 # Please *don't* use this unless all tests pass.
1333 # If you want to report test failures, use "nmake nok" instead.
1335 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1338 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1341 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1344 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok