win32/Makefile.ce

   1 #
   2 # perl makefile for wince
   3 # During the cross-compilation, it first uses Makefile file to build
   4 # miniperl on HOST and then build required platform
   5 #
   6
   7 SRCDIR     = ..
   8 PV         = 59
   9 INST_VER   = 5.15.5
  10
  11 # INSTALL_ROOT specifies a path where this perl will be installed on CE device
  12 INSTALL_ROOT=/netzwerk/sprache/perl
  13 INST_TOP=$(INSTALL_ROOT)
  14 INST_VER=
  15
  16 # PERLCEDIR shoud be set to current directory
  17 PERLCEDIR  = H:\src\wince\perl\win32
  18
  19 # WCEROOT is a directory where Windows CE Tools was installed
  20 WCEROOT    = D:\Windows CE Tools
  21
  22 # HPERL stands for host perl, which is perl on local desktop machine
  23 # which is usually ..\miniperl.exe
  24 #HPERL     = N:\Programme\perl\bin\perl.exe
  25 HPERL = $(MAKEDIR)\..\miniperl.exe
  26
  27 CEPATH     = D:\Programme\Microsoft eMbedded Tools\EVC\WCE211\BIN
  28 CELIBDLLDIR  = h:\src\wince\celib-palm-3.0
  29 CECONSOLEDIR = h:\src\wince\w32console
  30
  31 # specify following options to build perl on local machine, by MSVC
  32 MSVCDIR         = D:\MSVStudio\VC98
  33 CCHOME          = $(MSVCDIR)
  34 CCINCDIR        = $(CCHOME)\include
  35 CCLIBDIR        = $(CCHOME)\lib
  36
  37 # Only for WIN2000
  38 #YES        = /y
  39 COPY       = copy $(YES)
  40 XCOPY      = xcopy $(YES) /f /r /i /d
  41 RCOPY      = xcopy $(YES) /f /r /i /e /d
  42
  43 # cecopy program. Make shure it is in your path, as well as cemkdir, cedel
  44 CECOPY     = cecopy
  45
  46 #
  47 # Comment out next assign to disable perl's I/O subsystem and use compiler's
  48 # stdio for IO - depending on your compiler vendor and run time library you may
  49 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
  50 # You will also be unable to take full advantage of perl5.8's support for multiple
  51 # encodings and may see lower IO performance. You have been warned.
  52 USE_PERLIO      = define
  53
  54 #
  55 # set this if you wish to use perl's malloc
  56 # This will make perl run few times faster
  57 # WARNING: Turning this on/off WILL break binary compatibility with extensions
  58 # you may have compiled with/without it.
  59 #
  60 PERL_MALLOC     = define
  61
  62
  63 NOOP       = @echo
  64 # keep this untouched!
  65 NULL       =
  66
  67
  68 #CFG=DEBUG
  69 CFG=RELEASE
  70
  71 !if "$(MACHINE)" == ""
  72 MACHINE=wince-arm-hpc-wce300
  73 #MACHINE=wince-arm-hpc-wce211
  74 #MACHINE=wince-sh3-hpc-wce211
  75 #MACHINE=wince-mips-hpc-wce211
  76 #MACHINE=wince-sh3-hpc-wce200
  77 #MACHINE=wince-mips-hpc-wce200
  78 #MACHINE=wince-arm-pocket-wce300
  79 #MACHINE=wince-mips-pocket-wce300
  80 #MACHINE=wince-sh3-pocket-wce300
  81 #MACHINE=wince-x86em-pocket-wce300
  82 #MACHINE=wince-mips-palm-wce211
  83 #MACHINE=wince-sh3-palm-wce211
  84 #MACHINE=wince-x86em-palm-wce211
  85 !endif
  86
  87 # set this to your email address
  88 #
  89 #EMAIL          =
  90
  91 ##################### CHANGE THESE ONLY IF YOU MUST #####################
  92
  93 ######################################################################
  94 # machines
  95
  96 !if "$(MACHINE)" == "wince-sh3-hpc-wce211"
  97 CC         = shcl.exe
  98 ARCH       = SH3
  99 CPU        = SH3
 100 TARGETCPU  = SH3
 101 CEVersion  = 211
 102 OSVERSION  = WCE211
 103 PLATFORM   = MS HPC Pro
 104 MCFLAGS    = -MDd -DSH3 -D_SH3_ -DSHx -DPROCESSOR_SH3 -DPALM_SIZE \
 105              -I $(CELIBDLLDIR)\inc
 106 SUBSYS     = -subsystem:windowsce,2.11
 107 CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
 108 LDLIBPATH  = -libpath:$(CELIBPATH)
 109 STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
 110              $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
 111 !endif
 112
 113 !if "$(MACHINE)" == "wince-mips-hpc-wce211"
 114 CC         = clmips.exe
 115 ARCH       = MIPS
 116 CPU        = MIPS
 117 TARGETCPU  = MIPS
 118 CEVersion  = 211
 119 OSVERSION  = WCE211
 120 PLATFORM   = MS HPC Pro
 121 MCFLAGS    = -D _MT -D _DLL \
 122              -D MIPS -D mips -D _MIPS_ -D _mips_ -DPROCESSOR_MIPS \
 123              -D PALM_SIZE \
 124              -I $(CELIBDLLDIR)\inc
 125 SUBSYS     = -subsystem:windowsce,2.11
 126 CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
 127 LDLIBPATH  = -libpath:$(CELIBPATH)
 128 STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
 129              $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
 130 !endif
 131
 132 !if "$(MACHINE)" == "wince-mips-hpc-wce200"
 133 CC         = clmips.exe
 134 ARCH       = MIPS
 135 CPU        = MIPS
 136 TARGETCPU  = MIPS
 137 CEVersion  = 200
 138 OSVERSION  = WCE200
 139 PLATFORM   = MS HPC
 140 # MUST USE -MD to get the right FPE stuff...
 141 MCFLAGS    = -D _MT -D _DLL -MD \
 142              -D MIPS -D mips -D _MIPS_ -D _mips_ -DPROCESSOR_MIPS \
 143              -D PALM_SIZE \
 144              -I $(CELIBDLLDIR)\inc
 145 SUBSYS     = -subsystem:windowsce,2.00
 146 CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
 147 LDLIBPATH  = -libpath:$(CELIBPATH)
 148 STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
 149              $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
 150 !endif
 151
 152 !if "$(MACHINE)" == "wince-sh3-hpc-wce200"
 153 CC         = shcl.exe
 154 ARCH       = SH3
 155 CPU        = SH3
 156 TARGETCPU  = SH3
 157 CEVersion  = 200
 158 OSVERSION  = WCE200
 159 PLATFORM   = MS HPC
 160 # MUST USE -MD to get the right FPE stuff...
 161 MCFLAGS    = -D _MT -D _DLL -MD \
 162              -D SH3 -D sh3 -D _SH3_ -D _sh3_ -D SHx -DPROCESSOR_SH3 \
 163              -D PALM_SIZE \
 164              -I $(CELIBDLLDIR)\inc
 165 SUBSYS     = -subsystem:windowsce,2.00
 166 CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
 167 LDLIBPATH  = -libpath:$(CELIBPATH)
 168 STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
 169              $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
 170 !endif
 171
 172 !if "$(MACHINE)" == "wince-arm-hpc-wce211"
 173 CC         = clarm.exe
 174 ARCH       = ARM
 175 CPU        = ARM
 176 TARGETCPU  = ARM
 177 CEVersion  = 211
 178 OSVERSION  = WCE211
 179 PLATFORM   = MS HPC Pro
 180 MCFLAGS    = -D _MT -D _DLL -D ARM -D arm -D _arm_ -D _ARM_ \
 181              -DPROCESSOR_ARM -DPALM_SIZE \
 182              -I $(CELIBDLLDIR)\inc
 183 SUBSYS     = -subsystem:windowsce,2.11
 184 CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
 185 LDLIBPATH  = -libpath:$(CELIBPATH)
 186 STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
 187              $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
 188 !endif
 189
 190 !if "$(MACHINE)" == "wince-arm-hpc-wce300"
 191 CC         = clarm.exe
 192 ARCH       = ARM
 193 CPU        = ARM
 194 TARGETCPU  = ARM
 195 CEVersion  = 300
 196 OSVERSION  = WCE300
 197 #PLATFORM   = HPC2000
 198 MCFLAGS    = -D _MT -D _DLL -D ARM -D arm -D _arm_ -D _ARM_ \
 199              -DPROCESSOR_ARM -DPALM_SIZE \
 200              -I $(CELIBDLLDIR)\inc
 201 SUBSYS     = -subsystem:windowsce,3.00
 202 CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
 203 LDLIBPATH  = -libpath:$(CELIBPATH)
 204 STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
 205              $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
 206 !endif
 207
 208 !if "$(MACHINE)" == "wince-mips-palm-wce211"
 209 CC         = clmips.exe
 210 ARCH       = MIPS
 211 CPU        = MIPS
 212 TARGETCPU  = MIPS
 213 CEVersion  = 211
 214 OSVERSION  = WCE211
 215 PLATFORM   = MS Palm Size PC
 216 MCFLAGS    = -DMIPS -D_MIPS_ -DPROCESSOR_MIPS -D PALM_SIZE -D _DLL -D _MT \
 217              -I $(CELIBDLLDIR)\inc
 218 SUBSYS     = -subsystem:windowsce,2.11
 219 CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
 220 LDLIBPATH  = -libpath:$(CELIBPATH)
 221 STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
 222              $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
 223 !endif
 224
 225 !if "$(MACHINE)" == "wince-sh3-palm-wce211"
 226 CC         = shcl.exe
 227 ARCH       = SH3
 228 CPU        = SH3
 229 TARGETCPU  = SH3
 230 CEVersion  = 211
 231 OSVERSION  = WCE211
 232 PLATFORM   = MS Palm Size PC
 233 MCFLAGS    = -D _MT -D _DLL -DSH3 -D_SH3_ -DSHx -DPROCESSOR_SH3 -DPALM_SIZE \
 234              -I $(CELIBDLLDIR)\inc
 235 SUBSYS     = -subsystem:windowsce,2.11
 236 CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
 237 LDLIBPATH  = -libpath:$(CELIBPATH)
 238 STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
 239              $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
 240 !endif
 241
 242 !if "$(MACHINE)" == "wince-x86em-palm-wce211"
 243 CC         = cl.exe
 244 ARCH       = X86EM
 245 CPU        = X86
 246 TARGETCPU  = X86
 247 CEVersion  = 211
 248 OSVERSION  = WCE211
 249 PLATFORM   = MS Palm Size PC
 250 MCFLAGS    = -MDd -DX86 -D_X86_ -DPROCESSOR_X86 \
 251              -D_WIN32_WCE_EMULATION -DPALM_SIZE \
 252              -I $(CELIBDLLDIR)\inc
 253 MACH       = -machine:x86
 254 SUBSYS     = -subsystem:windows
 255 CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
 256 LDLIBPATH  = -libpath:$(CELIBPATH)
 257 STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
 258              $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
 259 !endif
 260
 261 !if "$(MACHINE)" == "wince-x86em-pocket-wce300"
 262 CC         = cl.exe
 263 ARCH       = X86EM
 264 CPU        = X86
 265 TARGETCPU  = X86
 266 CEVersion  = 300
 267 OSVERSION  = WCE300
 268 PLATFORM   = MS Pocket PC
 269 MCFLAGS    = -DX86 -D_X86_ -DPROCESSOR_X86 -D _MT -D _DLL \
 270              -D_WIN32_WCE_EMULATION -DPALM_SIZE -DPOCKET_SIZE \
 271              -I $(CELIBDLLDIR)\inc
 272 MACH       = -machine:x86
 273 SUBSYS     = -subsystem:windows
 274 CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
 275 LDLIBPATH  = -libpath:$(CELIBPATH)
 276 STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
 277              $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
 278 !endif
 279
 280 !if "$(MACHINE)" == "wince-mips-pocket-wce300"
 281 CC         = clmips.exe
 282 ARCH       = MIPS
 283 CPU        = MIPS
 284 TARGETCPU  = MIPS
 285 CEVersion  = 300
 286 OSVERSION  = WCE300
 287 PLATFORM   = MS Pocket PC
 288 MCFLAGS    = -D MIPS -D mips -D _MIPS_ -D _mips_ -DPROCESSOR_MIPS \
 289              -D _MT -D _DLL -DPALM_SIZE -DPOCKET_SIZE \
 290              -I $(CELIBDLLDIR)\inc
 291 MACH       = -machine:mips
 292 SUBSYS     = -subsystem:windowsce,3.00
 293 CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
 294 #STDLIBPATH = $(WCEROOT)\$(OSVERSION)\$(PLATFORM)\lib\$(CPU)
 295 LDLIBPATH  = -libpath:$(CELIBPATH)
 296 #"-libpath:$(STDLIBPATH)"
 297 STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
 298              $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
 299 !endif
 300
 301 !if "$(MACHINE)" == "wince-sh3-pocket-wce300"
 302 CC         = shcl.exe
 303 ARCH       = SH3
 304 CPU        = SH3
 305 TARGETCPU  = SH3
 306 CEVersion  = 300
 307 OSVERSION  = WCE300
 308 PLATFORM   = MS Pocket PC
 309 MCFLAGS    = -D _MT -D _DLL -DSH3 -D_SH3_ -DSHx -DPROCESSOR_SH3 \
 310              -DPALM_SIZE -DPOCKET_SIZE \
 311              -I $(CELIBDLLDIR)\inc
 312 MACH       = -machine:sh3
 313 SUBSYS     = -subsystem:windowsce,3.00
 314 CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
 315 LDLIBPATH  = -libpath:$(CELIBPATH)
 316 STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
 317              $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
 318 !endif
 319
 320 !if "$(MACHINE)" == "wince-arm-pocket-wce300"
 321 CC         = clarm.exe
 322 ARCH       = ARM
 323 CPU        = ARM
 324 TARGETCPU  = ARM
 325 CEVersion  = 300
 326 OSVERSION  = WCE300
 327 PLATFORM   = MS Pocket PC
 328 MCFLAGS    = -D ARM -D arm -D _ARM_ -D _arm_ -DPROCESSOR_ARM \
 329              -D _MT -D _DLL -DPALM_SIZE -DPOCKET_SIZE \
 330              -I $(CELIBDLLDIR)\inc
 331 MACH       = -machine:arm
 332 SUBSYS     = -subsystem:windowsce,3.00
 333 CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
 334 LDLIBPATH  = -libpath:$(CELIBPATH)
 335 STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
 336              $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
 337 !endif
 338
 339 ######################################################################
 340 # common section
 341
 342 CEDEFS    = -D_WINDOWS -D_WIN32_WCE=$(CEVersion) -DUNDER_CE=$(CEVersion) \
 343             $(MCFLAGS) -D PERL
 344
 345 CECFLAGS  = $(CEDEFS)
 346
 347 !if "$(CFG)" == "DEBUG"
 348 CECFLAGS  = $(CECFLAGS) -Zi -Od
 349 !endif
 350
 351 !if "$(CFG)" == "RELEASE"
 352 # -O2 and -Ot give internal compiler error in perl.c and lexer.
 353 # Also the dll cannot be loaded by perl.exe...
 354 !if "$(CPU)" == "SH3"
 355 !else
 356 CECFLAGS  = $(CECFLAGS) -O2 -Ot
 357 !endif
 358
 359 !endif
 360
 361 RCDEFS    = /l 0x407 /r /d "UNICODE" /d UNDER_CE=$(CEVersion) \
 362             /d _WIN32_WCE=$(CEVersion)
 363
 364 PATH=$(CEPATH);$(PATH)
 365
 366 INCLUDE=$(WCEROOT)\$(OSVERSION)\$(PLATFORM)\include
 367 LIB=$(WCEROOT)\$(OSVERSION)\$(PLATFORM)\lib\$(ARCH)
 368
 369 ######################################################################
 370
 371 !message
 372 !message Compiling for $(MACHINE)
 373 !message LIB=$(LIB)
 374 !message INCLUDE=$(INCLUDE)
 375 !message PATH=$(CEPATH)
 376 !message
 377
 378 ######################################################################
 379 #
 380 # Additional compiler flags can be specified here.
 381 #
 382
 383 BUILDOPT        = $(BUILDOPT) $(CECFLAGS) -DUSE_CROSS_COMPILE
 384
 385
 386 !IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
 387 D_CRYPT         = undef
 388 !ELSE
 389 D_CRYPT         = define
 390 CRYPT_FLAG      = -DHAVE_DES_FCRYPT
 391 !ENDIF
 392
 393 !IF "$(PERL_MALLOC)" == ""
 394 PERL_MALLOC     = undef
 395 !ENDIF
 396
 397 !IF "$(USE_MULTI)" == ""
 398 USE_MULTI       = undef
 399 !ENDIF
 400
 401 !IF "$(USE_ITHREADS)" == ""
 402 USE_ITHREADS    = undef
 403 !ENDIF
 404
 405 !IF "$(USE_IMP_SYS)" == ""
 406 USE_IMP_SYS     = undef
 407 !ENDIF
 408
 409 !IF "$(USE_PERLIO)" == ""
 410 USE_PERLIO      = undef
 411 !ENDIF
 412
 413 !IF "$(USE_PERLCRT)" == ""
 414 USE_PERLCRT     = undef
 415 !ENDIF
 416
 417 !IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
 418 USE_MULTI       = define
 419 !ENDIF
 420
 421 !IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
 422 USE_MULTI       = define
 423 !ENDIF
 424
 425 !IF "$(USE_MULTI)" != "undef"
 426 BUILDOPT        = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
 427 !ENDIF
 428
 429 !IF "$(USE_IMP_SYS)" != "undef"
 430 BUILDOPT        = $(BUILDOPT) -DPERL_IMPLICIT_SYS
 431 !ENDIF
 432
 433 !IF "$(USE_PERLIO)" == "define"
 434 BUILDOPT        = $(BUILDOPT) -DUSE_PERLIO
 435 !ENDIF
 436
 437 !IF "$(CROSS_NAME)" == ""
 438 CROSS_NAME      = $(MACHINE)
 439 !ENDIF
 440
 441 # new option - automatically defined in perl.h...
 442 #BUILDOPT        = $(BUILDOPT) -DUSE_ENVIRON_ARRAY
 443
 444 PROCESSOR_ARCHITECTURE = $(TARGETCPU)
 445 ARCHNAME        = $(PLATFORM)-$(OSVERSION)-$(PROCESSOR_ARCHITECTURE)
 446 ARCHDIR         = ..\lib\$(ARCHNAME)
 447 COREDIR         = ..\lib\CORE
 448 XCOREDIR        = ..\xlib\$(CROSS_NAME)\CORE
 449 AUTODIR         = ..\lib\auto
 450 LIBDIR          = ..\lib
 451 EXTDIR          = ..\ext
 452 PODDIR          = ..\pod
 453 EXTUTILSDIR     = $(LIBDIR)\ExtUtils
 454
 455 LINK32          = link
 456 LIB32           = $(LINK32) -lib
 457 RSC             = rc
 458
 459 INCLUDES        = -I.\include -I. -I..
 460 DEFINES         = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG) $(CECFLAGS)
 461 LOCDEFS         = -DPERLDLL -DPERL_CORE
 462 CXX_FLAG        = -TP
 463
 464 PERLEXE_RES     = perl.res
 465 PERLDLL_RES     =
 466
 467 !if "$(CFG)" == "RELEASE"
 468 CELIB           = celib.lib
 469 !endif
 470
 471 !if "$(CFG)" == "DEBUG"
 472 CELIB           = celib.lib
 473 !endif
 474
 475 CELIBS          = -nodefaultlib \
 476                   winsock.lib $(CELIB) coredll.lib
 477
 478 !if $(CEVersion) > 200
 479 CELIBS          = $(CELIBS) corelibc.lib
 480 !else
 481 CELIBS          = $(CELIBS) msvcrt.lib
 482 !endif
 483
 484 LIBBASEFILES    = $(CRYPT_LIB) $(CELIBS)
 485
 486 LIBFILES        = $(LIBBASEFILES) $(LIBC)
 487
 488 CFLAGS          = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
 489                 $(PCHFLAGS) $(OPTIMIZE)
 490
 491 LINK_FLAGS      = -nologo -machine:$(PROCESSOR_ARCHITECTURE)
 492
 493 !if "$(CFG)" == "DEBUG"
 494 LINK_FLAGS      = $(LINK_FLAGS) -debug:full -pdb:none
 495 !else
 496 LINK_FLAGS      = $(LINK_FLAGS) -release
 497 !endif
 498
 499 OBJOUT_FLAG     = -Fo
 500 EXEOUT_FLAG     = -Fe
 501
 502 CFLAGS_O        = $(CFLAGS) $(BUILDOPT)
 503
 504 o = .obj
 505
 506 #
 507 # Rules
 508 #
 509
 510 .SUFFIXES : .c $(o) .dll .lib .exe .rc .res
 511
 512 .c$(o):
 513         $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
 514
 515 .y.c:
 516         $(NOOP)
 517
 518 $(o).dll:
 519         $(LINK32) -dll $(SUBSYS) $(LDLIBPATH) \
 520             -implib:$(*B).lib -def:$(*B).def \
 521             -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
 522
 523 .rc.res:
 524         $(RSC) -i.. $<
 525
 526 # This must be relative to ../lib/CORE, else the ext dll build fails...
 527 PERLIMPLIB_EXP  = ..\..\..\xlib\$(CROSS_NAME)\CORE\perl$(PV).lib
 528 PERLIMPLIB      = $(PERLCEDIR)\$(MACHINE)\perl$(PV).lib
 529 PERLDLL         = $(MACHINE)\perl$(PV).dll
 530
 531 DLLDIR          = $(MACHINE)\dll
 532 PERLEXE         = $(MACHINE)\perl.exe
 533
 534 CONFIGPM        = ..\xlib\$(CROSS_NAME)\Config.pm
 535 MINIMOD         = ..\lib\ExtUtils\Miniperl.pm
 536
 537 # Unicode data files generated by mktables
 538 UNIDATAFILES     = ..\lib\unicore\Decomposition.pl \
 539                    ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
 540                    ..\lib\unicore\Heavy.pl ..\lib\unicore\mktables.lst \
 541                    ..\lib\unicore\UCD.pl ..\lib\unicore\Name.pm \
 542                    ..\lib\unicore\TestProp.pl
 543
 544 # Directories of Unicode data files generated by mktables
 545 UNIDATADIR1     = ..\lib\unicore\To
 546 UNIDATADIR2     = ..\lib\unicore\lib
 547
 548 # Nominate a target which causes extensions to be re-built
 549 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
 550 # on and really only the interface - i.e. the .def file used to export symbols
 551 # from the .dll
 552 PERLDEP         = perldll.def
 553
 554 MAKE            = nmake -nologo
 555
 556 CFGSH_TMPL      = config.ce
 557 CFGH_TMPL       = config_H.ce
 558
 559 #
 560 # filenames given to xsubpp must have forward slashes (since it puts
 561 # full pathnames in #line strings)
 562 XSUBPP          = $(HPERL) -I..\..\lib -MCross=$(CROSS_NAME) ..\$(EXTUTILSDIR)\xsubpp \
 563                 -C++ -prototypes
 564
 565 MICROCORE_SRC   =               \
 566                 ..\av.c         \
 567                 ..\deb.c        \
 568                 ..\doio.c       \
 569                 ..\doop.c       \
 570                 ..\dump.c       \
 571                 ..\globals.c    \
 572                 ..\gv.c         \
 573                 ..\mro.c        \
 574                 ..\hv.c         \
 575                 ..\keywords.c   \
 576                 ..\mg.c         \
 577                 ..\op.c         \
 578                 ..\pad.c        \
 579                 ..\perl.c       \
 580                 ..\perlapi.c    \
 581                 ..\perly.c      \
 582                 ..\pp.c         \
 583                 ..\pp_ctl.c     \
 584                 ..\pp_hot.c     \
 585                 ..\pp_pack.c    \
 586                 ..\pp_sort.c    \
 587                 ..\pp_sys.c     \
 588                 ..\reentr.c     \
 589                 ..\regcomp.c    \
 590                 ..\regexec.c    \
 591                 ..\run.c        \
 592                 ..\scope.c      \
 593                 ..\sv.c         \
 594                 ..\taint.c      \
 595                 ..\toke.c       \
 596                 ..\universal.c  \
 597                 ..\utf8.c       \
 598                 ..\util.c
 599
 600 EXTRACORE_SRC   = $(EXTRACORE_SRC) perllib.c
 601
 602 !IF "$(PERL_MALLOC)" == "define"
 603 EXTRACORE_SRC   = $(EXTRACORE_SRC) ..\malloc.c
 604 !ENDIF
 605
 606 EXTRACORE_SRC   = $(EXTRACORE_SRC) ..\perlio.c .\win32io.c
 607
 608 WIN32_SRC       =               \
 609                 .\wince.c       \
 610                 .\wincesck.c    \
 611                 .\win32thread.c
 612
 613 !IF "$(CRYPT_SRC)" != ""
 614 WIN32_SRC       = $(WIN32_SRC) .\$(CRYPT_SRC)
 615 !ENDIF
 616
 617 DLL_SRC         = $(DYNALOADER).c
 618
 619 CORE_NOCFG_H    =               \
 620                 ..\av.h         \
 621                 ..\cop.h        \
 622                 ..\cv.h         \
 623                 ..\dosish.h     \
 624                 ..\embed.h      \
 625                 ..\form.h       \
 626                 ..\gv.h         \
 627                 ..\handy.h      \
 628                 ..\hv.h         \
 629                 ..\iperlsys.h   \
 630                 ..\mg.h         \
 631                 ..\nostdio.h    \
 632                 ..\op.h         \
 633                 ..\opcode.h     \
 634                 ..\perl.h       \
 635                 ..\perlapi.h    \
 636                 ..\perlsdio.h   \
 637                 ..\perlsfio.h   \
 638                 ..\perly.h      \
 639                 ..\pp.h         \
 640                 ..\proto.h      \
 641                 ..\regexp.h     \
 642                 ..\scope.h      \
 643                 ..\sv.h         \
 644                 ..\thread.h     \
 645                 ..\unixish.h    \
 646                 ..\utf8.h       \
 647                 ..\util.h       \
 648                 ..\warnings.h   \
 649                 ..\XSUB.h       \
 650                 ..\EXTERN.h     \
 651                 ..\perlvars.h   \
 652                 ..\intrpvar.h   \
 653                 .\include\dirent.h      \
 654                 .\include\netdb.h       \
 655                 .\include\sys\socket.h  \
 656                 .\win32.h
 657
 658 DYNAMIC_EXT     = Socket IO Fcntl Opcode SDBM_File POSIX attributes B re \
 659                 Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
 660                 Sys/Hostname
 661
 662 STATIC_EXT      = DynaLoader
 663
 664 DYNALOADER      = $(EXTDIR)\DynaLoader\DynaLoader
 665
 666 ERRNO_PM        = $(LIBDIR)\Errno.pm
 667
 668
 669 EXTENSION_PM    =               \
 670                 $(ERRNO_PM)
 671
 672 CFG_VARS = \
 673  "INST_DRV=$(INST_DRV)" \
 674  "INST_TOP=$(INST_TOP)" \
 675  "INST_VER=$(INST_VER)" \
 676  "INST_ARCH=$(INST_ARCH)" \
 677  "archname=$(ARCHNAME)" \
 678  "CC=$(CC)" \
 679  "ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT)" \
 680  "cppflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT)" \
 681  "cf_by=vkon" \
 682  "cf_email=$(EMAIL)" \
 683  "d_crypt=$(D_CRYPT)" \
 684  "d_mymalloc=$(PERL_MALLOC)" \
 685  "libs=$(LIBFILES)" \
 686  "incpath=$(CCINCDIR)" \
 687  "libperl=$(PERLIMPLIB_EXP)" \
 688  "libpth=$(LIBPATH)" \
 689  "libc=$(LIBC)" \
 690  "make=nmake" \
 691  "static_ext=$(STATIC_EXT)" \
 692  "dynamic_ext=$(DYNAMIC_EXT)" \
 693  "useithreads=$(USE_ITHREADS)" \
 694  "usemultiplicity=$(USE_MULTI)" \
 695  "useperlio=$(USE_PERLIO)" \
 696  "LINK_FLAGS=$(LDLIBPATH) $(LINK_FLAGS) $(SUBSYS)" \
 697  "optimize=$(OPTIMIZE)"
 698
 699 #
 700 # Top targets
 701 #
 702
 703 all: hostminiperl $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) MakePPPort Extensions
 704
 705 $(DYNALOADER)$(o) : $(DYNALOADER).c xconfig.h $(EXTDIR)\DynaLoader\dlutils.c
 706
 707 $(CONFIGPM) : $(HPERL) ..\config.sh .\xconfig.h config_h.PL ..\minimod.pl
 708         cd .. && $(HPERL) configpm --cross=$(CROSS_NAME) --no-glossary
 709         -mkdir $(XCOREDIR)
 710         $(XCOPY) ..\*.h $(XCOREDIR)\*.*
 711         $(XCOPY) ..\*.inc $(XCOREDIR)\*.*
 712         $(XCOPY) *.h $(XCOREDIR)\*.*
 713         $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
 714         $(RCOPY) include $(XCOREDIR)\*.*
 715
 716 .\xconfig.h:
 717         -del /f xconfig.h
 718         -mkdir $(XCOREDIR)
 719         -$(HPERL) -I..\lib -MCross=$(CROSS_NAME) config_h.PL "INST_VER=$(INST_VER)" "CORE_DIR=$(XCOREDIR)" "CONFIG_H=xconfig.h"
 720         $(XCOPY) xconfig.h $(XCOREDIR)\config.h
 721
 722 ..\config.sh: config.ce config_sh.PL
 723         $(HPERL) -I..\lib -I. config_sh.PL $(CFG_VARS) config.ce > ..\config.sh
 724
 725 $(MINIMOD) : ..\minimod.pl
 726         cd .. && $(HPERL) minimod.pl > lib\ExtUtils\Miniperl.pm
 727
 728 $(DYNALOADER).c: $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
 729         if not exist $(AUTODIR) mkdir $(AUTODIR)
 730         cd $(EXTDIR)\$(*B)
 731         $(HPERL) -I..\..\lib -MCross=$(CROSS_NAME) $(*B)_pm.PL
 732         $(HPERL) -I..\..\lib -MCross=$(CROSS_NAME) XSLoader_pm.PL
 733         cd ..\..\win32
 734         $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
 735         $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
 736         cd $(EXTDIR)\$(*B)
 737         $(XSUBPP) dl_win32.xs > $(*B).c
 738         cd ..\..\win32
 739
 740 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
 741         $(COPY) dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
 742
 743 MakePPPort: $(MINIPERL) $(CONFIGPM)
 744         $(HPERL) -I..\lib -MCross=$(CROSS_NAME) ..\mkppport
 745
 746 MakePPPort_clean:
 747         -if exist $(HPERL) $(HPERL) -I..\lib ..\mkppport --clean
 748
 749 #----------------------------------------------------------------------------------
 750 NOT_COMPILE_EXT =
 751 !if "$(MACHINE)" == "wince-sh3-palm-wce211"
 752 NOT_COMPILE_EXT = $(NOT_COMPILE_EXT) !XS/Typemap
 753 !endif
 754 !if "$(MACHINE)" == "wince-mips-palm-wce211"
 755 NOT_COMPILE_EXT = $(NOT_COMPILE_EXT) !XS/Typemap
 756 !endif
 757
 758 Extensions: ..\make_ext.pl $(PERLDEP) $(CONFIGPM)
 759         $(HPERL) -I..\lib -I. -MCross=$(CROSS_NAME) ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --all \
 760         !POSIX $(NOT_COMPILE_EXT)
 761
 762 Extensions_clean:
 763         -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --all --target=clean
 764
 765 #----------------------------------------------------------------------------------
 766
 767 $(PERLEXE_RES): perl.rc perl.ico
 768         rc $(RCDEFS) perl.rc
 769
 770 clean:
 771         -rm -f $(MACHINE)/dll/*
 772         -rm -f $(MACHINE)/*.obj
 773         -rm -f $(MACHINE)/*.exe
 774         -rm -f $(MACHINE)/*.dll
 775         -rm -f $(MACHINE)/*.lib
 776         -rm -f ../config.sh ../lib/Config.pm
 777         -rm -f config.h xconfig.h perl.res
 778         -rm -f ../t/test_state
 779
 780 XDLLOBJS = \
 781 $(DLLDIR)\av.obj \
 782 $(DLLDIR)\deb.obj \
 783 $(DLLDIR)\doio.obj \
 784 $(DLLDIR)\doop.obj \
 785 $(DLLDIR)\dump.obj \
 786 $(DLLDIR)\globals.obj \
 787 $(DLLDIR)\gv.obj \
 788 $(DLLDIR)\mro.obj \
 789 $(DLLDIR)\hv.obj \
 790 $(DLLDIR)\locale.obj \
 791 $(DLLDIR)\mathoms.obj \
 792 $(DLLDIR)\mg.obj \
 793 $(DLLDIR)\numeric.obj \
 794 $(DLLDIR)\op.obj \
 795 $(DLLDIR)\pad.obj \
 796 $(DLLDIR)\perl.obj \
 797 $(DLLDIR)\perlapi.obj \
 798 $(DLLDIR)\perlio.obj \
 799 $(DLLDIR)\perly.obj \
 800 $(DLLDIR)\pp.obj \
 801 $(DLLDIR)\pp_ctl.obj \
 802 $(DLLDIR)\pp_hot.obj \
 803 $(DLLDIR)\pp_pack.obj \
 804 $(DLLDIR)\pp_sort.obj \
 805 $(DLLDIR)\pp_sys.obj \
 806 $(DLLDIR)\reentr.obj \
 807 $(DLLDIR)\regcomp.obj \
 808 $(DLLDIR)\regexec.obj \
 809 $(DLLDIR)\run.obj \
 810 $(DLLDIR)\scope.obj \
 811 $(DLLDIR)\sv.obj \
 812 $(DLLDIR)\taint.obj \
 813 $(DLLDIR)\toke.obj \
 814 $(DLLDIR)\universal.obj \
 815 $(DLLDIR)\utf8.obj \
 816 $(DLLDIR)\util.obj \
 817 $(DLLDIR)\win32thread.obj \
 818 $(DLLDIR)\wince.obj \
 819 $(DLLDIR)\win32io.obj \
 820 $(DLLDIR)\wincesck.obj \
 821 $(DLLDIR)\perllib.obj \
 822 $(DLLDIR)\DynaLoader.obj
 823 !IF "$(PERL_MALLOC)" == "define"
 824 XDLLOBJS        = $(XDLLOBJS) $(DLLDIR)\malloc.obj
 825 !ENDIF
 826 !IF "$(CRYPT_SRC)" != ""
 827 XDLLOBJS        = $(XDLLOBJS) $(DLLDIR)\fcrypt.obj
 828 !ENDIF
 829
 830 {$(SRCDIR)}.c{$(DLLDIR)}.obj:
 831     $(CC) -c $(CFLAGS_O) -DPERL_EXTERNAL_GLOB -Fo$(DLLDIR)\ $<
 832
 833 # compiler explains that it will optimize toke.c if we'll give it an
 834 # option -QMOb<num> with num>=4178
 835 $(DLLDIR)\toke.obj:
 836     $(CC) -c $(CFLAGS_O) -QMOb9000 -DPERL_EXTERNAL_GLOB -Fo$(DLLDIR)\ ..\toke.c
 837
 838 {$(SRCDIR)/win32}.c{$(DLLDIR)}.obj:
 839     $(CC) -c $(CFLAGS_O) -DPERL_EXTERNAL_GLOB -Fo$(DLLDIR)\ $<
 840
 841 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
 842 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
 843 !IF "$(USE_IMP_SYS)" == "define"
 844 $(DLLDIR)\perllib$(o)   : perllib.c .\perlhost.h .\vdir.h .\vmem.h
 845         $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
 846         rem (frustrated) mv perllib.obj $(DLLDIR)
 847 !ENDIF
 848
 849 perldll.def : $(HPERL) $(CONFIGPM) ..\embed.fnc ..\makedef.pl create_perllibst_h.pl
 850         $(HPERL) -MCross -I..\lib create_perllibst_h.pl
 851         $(HPERL) -MCross -w ..\makedef.pl PLATFORM=wince $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
 852             CCTYPE=$(CCTYPE) -DPERL_DLL=$(PERLDLL) TARG_DIR=..\ > perldll.def
 853
 854 $(PERLDLL) : $(DLLDIR) perldll.def $(XDLLOBJS) $(PERLDLL_RES)
 855         $(LINK32) -dll -def:perldll.def -out:$@ \
 856                   $(SUBSYS) $(LDLIBPATH) \
 857                   $(LINK_FLAGS) $(LIBFILES) \
 858                   $(XDLLOBJS) $(PERLDLL_RES)
 859
 860 $(DLLDIR) :
 861         if not exist "$(DLLDIR)" mkdir "$(DLLDIR)"
 862
 863 $(DLLDIR)\DynaLoader.obj: $(EXTDIR)\DynaLoader\DynaLoader.c
 864     $(CC) -c $(CFLAGS_O) -DPERL_EXTERNAL_GLOB -Fo$(DLLDIR)\ \
 865           $(EXTDIR)\DynaLoader\DynaLoader.c
 866
 867 XPERLEXEOBJS = \
 868 $(MACHINE)\perlmaince.obj
 869
 870 $(PERLEXE) : $(PERLDLL) $(CONFIGPM) $(XPERLEXEOBJS) $(PERLEXE_RES) $(STARTOBJS)
 871         $(XCOPY) $(MACHINE)\*.lib $(XCOREDIR)
 872         $(LINK32) $(SUBSYS) $(LDLIBPATH) \
 873             -entry:wWinMainCRTStartup \
 874             -out:$(MACHINE)\perl.exe \
 875             -stack:0x100000 $(LINK_FLAGS) $(STARTOBJS) $(XPERLEXEOBJS) \
 876             $(PERLIMPLIB) $(PERLEXE_RES) $(LIBFILES)
 877
 878 $(MACHINE)\perlmaince.obj : perlmaince.c
 879         $(CC) $(CFLAGS_O) -UPERLDLL -Fo$(MACHINE)\ -c perlmaince.c
 880
 881 iodll:     $(IO_DLL)
 882 socketdll: $(SOCKET_DLL)
 883 dumperdll: $(DUMPER_DLL)
 884
 885 dlls: socketdll iodll dumperdll
 886         -xmkdir -p $(MACHINE)/lib/auto/IO
 887         cp ../lib/auto/IO/IO.bs $(MACHINE)/lib/auto/IO
 888         cp ../lib/auto/IO/IO.dll $(MACHINE)/lib/auto/IO
 889         -xmkdir $(MACHINE)/lib/auto/Socket
 890         cp ../lib/auto/Socket/Socket.bs $(MACHINE)/lib/auto/Socket
 891         cp ../lib/auto/Socket/Socket.dll $(MACHINE)/lib/auto/Socket
 892         -xmkdir -p $(MACHINE)/lib/auto/Data/Dumper
 893         cp ../lib/auto/Data/Dumper/Dumper.bs $(MACHINE)/lib/auto/Data/Dumper
 894         cp ../lib/auto/Data/Dumper/Dumper.dll $(MACHINE)/lib/auto/Data/Dumper
 895
 896 makedist: all dlls
 897         $(COPY) $(CELIBPATH)\celib.dll $(MACHINE)
 898         cp perl.txt $(MACHINE)
 899         cp registry.bat $(MACHINE)
 900         cp ../lib/Config.pm $(MACHINE)/lib
 901         cd $(MACHINE)
 902         rm -f perl-$(MACHINE).tar.gz
 903         sh -c "tar cf perl-$(MACHINE).tar *.exe *.dll *.txt *.bat lib"
 904         gzip -9 perl-$(MACHINE).tar
 905         mv perl-$(MACHINE).tar.gz h:/freenet/new
 906         cd ..
 907
 908 install: all
 909         -cemkdir "$(INSTALL_ROOT)"
 910         -cemkdir "$(INSTALL_ROOT)\bin"
 911         -cemkdir "$(INSTALL_ROOT)\lib"
 912         $(CECOPY) "pc:$(MACHINE)/perl.exe" "ce:$(INSTALL_ROOT)/bin"
 913         $(CECOPY) "pc:$(MACHINE)/perl$(PV).dll" "ce:$(INSTALL_ROOT)/bin"
 914         $(CECOPY) "pc:../xlib/$(CROSS_NAME)/Config.pm" "ce:$(INSTALL_ROOT)/lib"
 915
 916 $(UNIDATAFILES) : $(HPERL) $(CONFIGPM) ..\lib\unicore\mktables
 917         cd ..\lib\unicore && \
 918         $(HPERL) -I.. mktables -P ..\..\pod -maketest -makelist -p
 919
 920 dist: all
 921         $(HPERL) -I..\lib -MCross=$(CROSS_NAME) ce-helpers\makedist.pl --distdir=dist-$(CROSS_NAME) --cross-name=$(CROSS_NAME)
 922
 923 zipdist: all
 924         $(HPERL) -I..\lib -MCross=$(CROSS_NAME) ce-helpers\makedist.pl --distdir=dist-$(CROSS_NAME) --cross-name=$(CROSS_NAME)
 925         $(HPERL) -I..\lib -MCross=$(CROSS_NAME) ce-helpers\makedist.pl --distdir=dist-$(CROSS_NAME) --cross-name=$(CROSS_NAME) --zip
 926
 927 zip:
 928         $(HPERL) -I..\lib -MCross=$(CROSS_NAME) ce-helpers\makedist.pl --distdir=dist-$(CROSS_NAME) --cross-name=$(CROSS_NAME) --zip
 929
 930 hostminiperl: ..\miniperl.exe
 931
 932 ..\miniperl.exe:
 933         set PATH=$(CCHOME)\bin;$(PATH)
 934         $(MAKE) -f Makefile "CCHOME=$(MSVCDIR)" "CCINCDIR=$(CCHOME)\include" "CCLIBDIR=$(CCHOME)\lib" "INCLUDE=$(CCHOME)\include" "LIB=$(CCHOME)\lib" "LINK_FLAGS=" .\config.h ..\miniperl.exe
 935
 936 host-install:
 937         perl -MConfig -MExtUtils::Install -we "install({'../lib/CORE', qq#$$Config{installprefixexp}/xlib/$(CROSS_NAME)/CORE#},1)"
 938         perl -MConfig -MExtUtils::Install -we "install({'../xlib/$(CROSS_NAME)', qq#$$Config{installprefixexp}/xlib/$(CROSS_NAME)#},1)"
 939         perl -MConfig -MFile::Copy -we "copy qq#./$(MACHINE)/perl$(PV).lib#, qq#$$Config{installprefixexp}/xlib/$(CROSS_NAME)/CORE#"
 940         perl -MConfig -MFile::Copy -we "copy qq#../lib/Cross.pm#, qq#$$Config{installprefixexp}/lib#"
 941         perl -MConfig -we "system qq#perl -pi.bak -we \"s{((arch^|priv)libexp)='.*'}{\$$1='# . \
 942          quotemeta($$Config{installprefixexp}) . \
 943          qq#/xlib/$(CROSS_NAME)'}\" $$Config{installprefixexp}/xlib/$(CROSS_NAME)/Config.pm#"