wince/Makefile.ce

   1 # perl makefile for wince
   2 #
   3 # Time-stamp: <26/10/01 15:10:06 keuchel@keuchelnt>
   4
   5 SRCDIR     = ..
   6 PV         = 59
   7 INST_VER   = 5.9.3
   8
   9 # INSTALL_ROOT specifies a path where this perl will be installed on CE device
  10 INSTALL_ROOT=/netzwerk/sprache/perl
  11 INST_TOP=$(INSTALL_ROOT)
  12 INST_VER=
  13
  14 # PERLCEDIR shoud be set to current directory
  15 PERLCEDIR  = H:\src\wince\perl\wince
  16
  17 # WCEROOT is a directory where Windows CE Tools was installed
  18 WCEROOT    = D:\Windows CE Tools
  19
  20 # HPERL stands for host perl, which is perl on local desktop machine
  21 # which is usually ..\miniperl.exe
  22 #HPERL     = N:\Programme\perl\bin\perl.exe
  23 HPERL = $(MAKEDIR)\..\miniperl.exe
  24
  25 CEPATH     = D:\Programme\Microsoft eMbedded Tools\EVC\WCE211\BIN
  26 CELIBDLLDIR  = h:\src\wince\celib-palm-3.0
  27 CECONSOLEDIR = h:\src\wince\w32console
  28
  29 # specify following options to build perl on local machine, by MSVC
  30 MSVCDIR         = D:\MSVStudio\VC98
  31 CCHOME          = $(MSVCDIR)
  32 CCINCDIR        = $(CCHOME)\include
  33 CCLIBDIR        = $(CCHOME)\lib
  34
  35 # Only for WIN2000
  36 #YES        = /y
  37 COPY       = copy $(YES)
  38 XCOPY      = xcopy $(YES) /f /r /i /d
  39 RCOPY      = xcopy $(YES) /f /r /i /e /d
  40
  41 # cecopy program. Make shure it is in your path, as well as cemkdir, cedel
  42 CECOPY     = cecopy
  43
  44 #
  45 # Comment out next assign to disable perl's I/O subsystem and use compiler's
  46 # stdio for IO - depending on your compiler vendor and run time library you may
  47 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
  48 # You will also be unable to take full advantage of perl5.8's support for multiple
  49 # encodings and may see lower IO performance. You have been warned.
  50 USE_PERLIO      = define
  51
  52 #
  53 # set this if you wish to use perl's malloc
  54 # This will make perl run few times faster
  55 # WARNING: Turning this on/off WILL break binary compatibility with extensions
  56 # you may have compiled with/without it.
  57 #
  58 PERL_MALLOC     = define
  59
  60
  61 NOOP       = @echo
  62 # keep this untouched!
  63 NULL       =
  64
  65
  66 #CFG=DEBUG
  67 CFG=RELEASE
  68
  69 !if "$(MACHINE)" == ""
  70 MACHINE=wince-arm-hpc-wce300
  71 #MACHINE=wince-arm-hpc-wce211
  72 #MACHINE=wince-sh3-hpc-wce211
  73 #MACHINE=wince-mips-hpc-wce211
  74 #MACHINE=wince-sh3-hpc-wce200
  75 #MACHINE=wince-mips-hpc-wce200
  76 #MACHINE=wince-arm-pocket-wce300
  77 #MACHINE=wince-mips-pocket-wce300
  78 #MACHINE=wince-sh3-pocket-wce300
  79 #MACHINE=wince-x86em-pocket-wce300
  80 #MACHINE=wince-mips-palm-wce211
  81 #MACHINE=wince-sh3-palm-wce211
  82 #MACHINE=wince-x86em-palm-wce211
  83 !endif
  84
  85 # set this to your email address
  86 #
  87 #EMAIL          =
  88
  89 ##################### CHANGE THESE ONLY IF YOU MUST #####################
  90
  91 ######################################################################
  92 # machines
  93
  94 !if "$(MACHINE)" == "wince-sh3-hpc-wce211"
  95 CC         = shcl.exe
  96 ARCH       = SH3
  97 CPU        = SH3
  98 TARGETCPU  = SH3
  99 CEVersion  = 211
 100 OSVERSION  = WCE211
 101 PLATFORM   = MS HPC Pro
 102 MCFLAGS    = -MDd -DSH3 -D_SH3_ -DSHx -DPROCESSOR_SH3 -DPALM_SIZE \
 103              -I $(CELIBDLLDIR)\inc
 104 SUBSYS     = -subsystem:windowsce,2.11
 105 CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
 106 LDLIBPATH  = -libpath:$(CELIBPATH)
 107 STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
 108              $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
 109 !endif
 110
 111 !if "$(MACHINE)" == "wince-mips-hpc-wce211"
 112 CC         = clmips.exe
 113 ARCH       = MIPS
 114 CPU        = MIPS
 115 TARGETCPU  = MIPS
 116 CEVersion  = 211
 117 OSVERSION  = WCE211
 118 PLATFORM   = MS HPC Pro
 119 MCFLAGS    = -D _MT -D _DLL \
 120              -D MIPS -D mips -D _MIPS_ -D _mips_ -DPROCESSOR_MIPS \
 121              -D PALM_SIZE \
 122              -I $(CELIBDLLDIR)\inc
 123 SUBSYS     = -subsystem:windowsce,2.11
 124 CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
 125 LDLIBPATH  = -libpath:$(CELIBPATH)
 126 STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
 127              $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
 128 !endif
 129
 130 !if "$(MACHINE)" == "wince-mips-hpc-wce200"
 131 CC         = clmips.exe
 132 ARCH       = MIPS
 133 CPU        = MIPS
 134 TARGETCPU  = MIPS
 135 CEVersion  = 200
 136 OSVERSION  = WCE200
 137 PLATFORM   = MS HPC
 138 # MUST USE -MD to get the right FPE stuff...
 139 MCFLAGS    = -D _MT -D _DLL -MD \
 140              -D MIPS -D mips -D _MIPS_ -D _mips_ -DPROCESSOR_MIPS \
 141              -D PALM_SIZE \
 142              -I $(CELIBDLLDIR)\inc
 143 SUBSYS     = -subsystem:windowsce,2.00
 144 CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
 145 LDLIBPATH  = -libpath:$(CELIBPATH)
 146 STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
 147              $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
 148 !endif
 149
 150 !if "$(MACHINE)" == "wince-sh3-hpc-wce200"
 151 CC         = shcl.exe
 152 ARCH       = SH3
 153 CPU        = SH3
 154 TARGETCPU  = SH3
 155 CEVersion  = 200
 156 OSVERSION  = WCE200
 157 PLATFORM   = MS HPC
 158 # MUST USE -MD to get the right FPE stuff...
 159 MCFLAGS    = -D _MT -D _DLL -MD \
 160              -D SH3 -D sh3 -D _SH3_ -D _sh3_ -D SHx -DPROCESSOR_SH3 \
 161              -D PALM_SIZE \
 162              -I $(CELIBDLLDIR)\inc
 163 SUBSYS     = -subsystem:windowsce,2.00
 164 CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
 165 LDLIBPATH  = -libpath:$(CELIBPATH)
 166 STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
 167              $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
 168 !endif
 169
 170 !if "$(MACHINE)" == "wince-arm-hpc-wce211"
 171 CC         = clarm.exe
 172 ARCH       = ARM
 173 CPU        = ARM
 174 TARGETCPU  = ARM
 175 CEVersion  = 211
 176 OSVERSION  = WCE211
 177 PLATFORM   = MS HPC Pro
 178 MCFLAGS    = -D _MT -D _DLL -D ARM -D arm -D _arm_ -D _ARM_ \
 179              -DPROCESSOR_ARM -DPALM_SIZE \
 180              -I $(CELIBDLLDIR)\inc
 181 SUBSYS     = -subsystem:windowsce,2.11
 182 CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
 183 LDLIBPATH  = -libpath:$(CELIBPATH)
 184 STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
 185              $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
 186 !endif
 187
 188 !if "$(MACHINE)" == "wince-arm-hpc-wce300"
 189 CC         = clarm.exe
 190 ARCH       = ARM
 191 CPU        = ARM
 192 TARGETCPU  = ARM
 193 CEVersion  = 300
 194 OSVERSION  = WCE300
 195 #PLATFORM   = HPC2000
 196 MCFLAGS    = -D _MT -D _DLL -D ARM -D arm -D _arm_ -D _ARM_ \
 197              -DPROCESSOR_ARM -DPALM_SIZE \
 198              -I $(CELIBDLLDIR)\inc
 199 SUBSYS     = -subsystem:windowsce,3.00
 200 CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
 201 LDLIBPATH  = -libpath:$(CELIBPATH)
 202 STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
 203              $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
 204 !endif
 205
 206 !if "$(MACHINE)" == "wince-mips-palm-wce211"
 207 CC         = clmips.exe
 208 ARCH       = MIPS
 209 CPU        = MIPS
 210 TARGETCPU  = MIPS
 211 CEVersion  = 211
 212 OSVERSION  = WCE211
 213 PLATFORM   = MS Palm Size PC
 214 MCFLAGS    = -DMIPS -D_MIPS_ -DPROCESSOR_MIPS -D PALM_SIZE -D _DLL -D _MT \
 215              -I $(CELIBDLLDIR)\inc
 216 SUBSYS     = -subsystem:windowsce,2.11
 217 CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
 218 LDLIBPATH  = -libpath:$(CELIBPATH)
 219 STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
 220              $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
 221 !endif
 222
 223 !if "$(MACHINE)" == "wince-sh3-palm-wce211"
 224 CC         = shcl.exe
 225 ARCH       = SH3
 226 CPU        = SH3
 227 TARGETCPU  = SH3
 228 CEVersion  = 211
 229 OSVERSION  = WCE211
 230 PLATFORM   = MS Palm Size PC
 231 MCFLAGS    = -D _MT -D _DLL -DSH3 -D_SH3_ -DSHx -DPROCESSOR_SH3 -DPALM_SIZE \
 232              -I $(CELIBDLLDIR)\inc
 233 SUBSYS     = -subsystem:windowsce,2.11
 234 CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
 235 LDLIBPATH  = -libpath:$(CELIBPATH)
 236 STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
 237              $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
 238 !endif
 239
 240 !if "$(MACHINE)" == "wince-x86em-palm-wce211"
 241 CC         = cl.exe
 242 ARCH       = X86EM
 243 CPU        = X86
 244 TARGETCPU  = X86
 245 CEVersion  = 211
 246 OSVERSION  = WCE211
 247 PLATFORM   = MS Palm Size PC
 248 MCFLAGS    = -MDd -DX86 -D_X86_ -DPROCESSOR_X86 \
 249              -D_WIN32_WCE_EMULATION -DPALM_SIZE \
 250              -I $(CELIBDLLDIR)\inc
 251 MACH       = -machine:x86
 252 SUBSYS     = -subsystem:windows
 253 CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
 254 LDLIBPATH  = -libpath:$(CELIBPATH)
 255 STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
 256              $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
 257 !endif
 258
 259 !if "$(MACHINE)" == "wince-x86em-pocket-wce300"
 260 CC         = cl.exe
 261 ARCH       = X86EM
 262 CPU        = X86
 263 TARGETCPU  = X86
 264 CEVersion  = 300
 265 OSVERSION  = WCE300
 266 PLATFORM   = MS Pocket PC
 267 MCFLAGS    = -DX86 -D_X86_ -DPROCESSOR_X86 -D _MT -D _DLL \
 268              -D_WIN32_WCE_EMULATION -DPALM_SIZE -DPOCKET_SIZE \
 269              -I $(CELIBDLLDIR)\inc
 270 MACH       = -machine:x86
 271 SUBSYS     = -subsystem:windows
 272 CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
 273 LDLIBPATH  = -libpath:$(CELIBPATH)
 274 STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
 275              $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
 276 !endif
 277
 278 !if "$(MACHINE)" == "wince-mips-pocket-wce300"
 279 CC         = clmips.exe
 280 ARCH       = MIPS
 281 CPU        = MIPS
 282 TARGETCPU  = MIPS
 283 CEVersion  = 300
 284 OSVERSION  = WCE300
 285 PLATFORM   = MS Pocket PC
 286 MCFLAGS    = -D MIPS -D mips -D _MIPS_ -D _mips_ -DPROCESSOR_MIPS \
 287              -D _MT -D _DLL -DPALM_SIZE -DPOCKET_SIZE \
 288              -I $(CELIBDLLDIR)\inc
 289 MACH       = -machine:mips
 290 SUBSYS     = -subsystem:windowsce,3.00
 291 CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
 292 #STDLIBPATH = $(WCEROOT)\$(OSVERSION)\$(PLATFORM)\lib\$(CPU)
 293 LDLIBPATH  = -libpath:$(CELIBPATH)
 294 #"-libpath:$(STDLIBPATH)"
 295 STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
 296              $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
 297 !endif
 298
 299 !if "$(MACHINE)" == "wince-sh3-pocket-wce300"
 300 CC         = shcl.exe
 301 ARCH       = SH3
 302 CPU        = SH3
 303 TARGETCPU  = SH3
 304 CEVersion  = 300
 305 OSVERSION  = WCE300
 306 PLATFORM   = MS Pocket PC
 307 MCFLAGS    = -D _MT -D _DLL -DSH3 -D_SH3_ -DSHx -DPROCESSOR_SH3 \
 308              -DPALM_SIZE -DPOCKET_SIZE \
 309              -I $(CELIBDLLDIR)\inc
 310 MACH       = -machine:sh3
 311 SUBSYS     = -subsystem:windowsce,3.00
 312 CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
 313 LDLIBPATH  = -libpath:$(CELIBPATH)
 314 STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
 315              $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
 316 !endif
 317
 318 !if "$(MACHINE)" == "wince-arm-pocket-wce300"
 319 CC         = clarm.exe
 320 ARCH       = ARM
 321 CPU        = ARM
 322 TARGETCPU  = ARM
 323 CEVersion  = 300
 324 OSVERSION  = WCE300
 325 PLATFORM   = MS Pocket PC
 326 MCFLAGS    = -D ARM -D arm -D _ARM_ -D _arm_ -DPROCESSOR_ARM \
 327              -D _MT -D _DLL -DPALM_SIZE -DPOCKET_SIZE \
 328              -I $(CELIBDLLDIR)\inc
 329 MACH       = -machine:arm
 330 SUBSYS     = -subsystem:windowsce,3.00
 331 CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
 332 LDLIBPATH  = -libpath:$(CELIBPATH)
 333 STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
 334              $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
 335 !endif
 336
 337 ######################################################################
 338 # common section
 339
 340 CEDEFS    = -D_WINDOWS -D_WIN32_WCE=$(CEVersion) -DUNDER_CE=$(CEVersion) \
 341             $(MCFLAGS) -D PERL
 342
 343 #CEDEFS    = $(CEDEFS) -DDEBUGGING_OPS
 344
 345 CECFLAGS  = $(CEDEFS)
 346
 347 !if "$(CFG)" == "DEBUG"
 348 CECFLAGS  = $(CECFLAGS) -Zi -Od
 349 !endif
 350
 351 !if "$(CFG)" == "RELEASE"
 352 # -O2 and -Ot give internal compiler error in perl.c and lexer.
 353 # Also the dll cannot be loaded by perl.exe...
 354 !if "$(CPU)" == "SH3"
 355 !else
 356 CECFLAGS  = $(CECFLAGS) -O2 -Ot
 357 !endif
 358
 359 !endif
 360
 361 RCDEFS    = /l 0x407 /r /d "UNICODE" /d UNDER_CE=$(CEVersion) \
 362             /d _WIN32_WCE=$(CEVersion)
 363
 364 PATH=$(CEPATH);$(PATH)
 365
 366 INCLUDE=$(WCEROOT)\$(OSVERSION)\$(PLATFORM)\include
 367 LIB=$(WCEROOT)\$(OSVERSION)\$(PLATFORM)\lib\$(ARCH)
 368
 369 ######################################################################
 370
 371 !message
 372 !message Compiling for $(MACHINE)
 373 !message LIB=$(LIB)
 374 !message INCLUDE=$(INCLUDE)
 375 !message PATH=$(CEPATH)
 376 !message
 377
 378 ######################################################################
 379 #
 380 # Additional compiler flags can be specified here.
 381 #
 382
 383 BUILDOPT        = $(BUILDOPT) $(CECFLAGS)
 384
 385
 386 !IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
 387 D_CRYPT         = undef
 388 !ELSE
 389 D_CRYPT         = define
 390 CRYPT_FLAG      = -DHAVE_DES_FCRYPT
 391 !ENDIF
 392
 393 !IF "$(PERL_MALLOC)" == ""
 394 PERL_MALLOC     = undef
 395 !ENDIF
 396
 397 !IF "$(USE_MULTI)" == ""
 398 USE_MULTI       = undef
 399 !ENDIF
 400
 401 !IF "$(USE_ITHREADS)" == ""
 402 USE_ITHREADS    = undef
 403 !ENDIF
 404
 405 !IF "$(USE_IMP_SYS)" == ""
 406 USE_IMP_SYS     = undef
 407 !ENDIF
 408
 409 !IF "$(USE_PERLIO)" == ""
 410 USE_PERLIO      = undef
 411 !ENDIF
 412
 413 !IF "$(USE_PERLCRT)" == ""
 414 USE_PERLCRT     = undef
 415 !ENDIF
 416
 417 !IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
 418 USE_MULTI       = define
 419 !ENDIF
 420
 421 !IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
 422 USE_MULTI       = define
 423 !ENDIF
 424
 425 !IF "$(USE_MULTI)" != "undef"
 426 BUILDOPT        = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
 427 !ENDIF
 428
 429 !IF "$(USE_IMP_SYS)" != "undef"
 430 BUILDOPT        = $(BUILDOPT) -DPERL_IMPLICIT_SYS
 431 !ENDIF
 432
 433 !IF "$(USE_PERLIO)" == "define"
 434 BUILDOPT        = $(BUILDOPT) -DUSE_PERLIO
 435 !ENDIF
 436
 437 !IF "$(CROSS_NAME)" == ""
 438 CROSS_NAME      = $(MACHINE)
 439 !ENDIF
 440
 441 # new option - automatically defined in perl.h...
 442 #BUILDOPT        = $(BUILDOPT) -DUSE_ENVIRON_ARRAY
 443
 444 PROCESSOR_ARCHITECTURE = $(TARGETCPU)
 445 ARCHNAME        = $(PLATFORM)-$(OSVERSION)-$(PROCESSOR_ARCHITECTURE)
 446 ARCHDIR         = ..\lib\$(ARCHNAME)
 447 COREDIR         = ..\lib\CORE
 448 XCOREDIR        = ..\xlib\$(CROSS_NAME)\CORE
 449 AUTODIR         = ..\lib\auto
 450 LIBDIR          = ..\lib
 451 EXTDIR          = ..\ext
 452 PODDIR          = ..\pod
 453 EXTUTILSDIR     = $(LIBDIR)\ExtUtils
 454
 455 LINK32          = link
 456 LIB32           = $(LINK32) -lib
 457 RSC             = rc
 458
 459 INCLUDES        = -I.\include -I..\win32\include -I. -I..
 460 DEFINES         = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG) $(CECFLAGS)
 461 LOCDEFS         = -DPERLDLL -DPERL_CORE
 462 CXX_FLAG        = -TP
 463
 464 PERLEXE_RES     = perl.res
 465 PERLDLL_RES     =
 466
 467 !if "$(CFG)" == "RELEASE"
 468 CELIB           = celib.lib
 469 !endif
 470
 471 !if "$(CFG)" == "DEBUG"
 472 CELIB           = celib.lib
 473 !endif
 474
 475 CELIBS          = -nodefaultlib \
 476                   winsock.lib $(CELIB) coredll.lib
 477
 478 !if $(CEVersion) > 200
 479 CELIBS          = $(CELIBS) corelibc.lib
 480 !else
 481 CELIBS          = $(CELIBS) msvcrt.lib
 482 !endif
 483
 484 LIBBASEFILES    = $(CRYPT_LIB) $(CELIBS)
 485
 486 LIBFILES        = $(LIBBASEFILES) $(LIBC)
 487
 488 CFLAGS          = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
 489                 $(PCHFLAGS) $(OPTIMIZE)
 490
 491 LINK_FLAGS      = -nologo -machine:$(PROCESSOR_ARCHITECTURE)
 492
 493 !if "$(CFG)" == "DEBUG"
 494 LINK_FLAGS      = $(LINK_FLAGS) -debug:full -pdb:none
 495 !else
 496 LINK_FLAGS      = $(LINK_FLAGS) -release
 497 !endif
 498
 499 OBJOUT_FLAG     = -Fo
 500 EXEOUT_FLAG     = -Fe
 501
 502 CFLAGS_O        = $(CFLAGS) $(BUILDOPT)
 503
 504 o = .obj
 505
 506 #
 507 # Rules
 508 #
 509
 510 .SUFFIXES : .c $(o) .dll .lib .exe .rc .res
 511
 512 .c$(o):
 513         $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
 514
 515 .y.c:
 516         $(NOOP)
 517
 518 $(o).dll:
 519         $(LINK32) -dll $(SUBSYS) $(LDLIBPATH) \
 520             -implib:$(*B).lib -def:$(*B).def \
 521             -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
 522
 523 .rc.res:
 524         $(RSC) -i.. $<
 525
 526 # This must be relative to ../lib/CORE, else the ext dll build fails...
 527 PERLIMPLIB_EXP  = ..\..\..\xlib\$(CROSS_NAME)\CORE\perl$(PV).lib
 528 PERLIMPLIB      = $(PERLCEDIR)\$(MACHINE)\perl$(PV).lib
 529 PERLDLL         = $(MACHINE)\perl$(PV).dll
 530
 531 DLLDIR          = $(MACHINE)\dll
 532 PERLEXE         = $(MACHINE)\perl.exe
 533
 534 CONFIGPM        = ..\xlib\$(CROSS_NAME)\Config.pm
 535 MINIMOD         = ..\lib\ExtUtils\Miniperl.pm
 536
 537 # Nominate a target which causes extensions to be re-built
 538 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
 539 # on and really only the interface - i.e. the .def file used to export symbols
 540 # from the .dll
 541 PERLDEP         = perldll.def
 542
 543 MAKE            = nmake -nologo
 544
 545 CFGSH_TMPL      = config.ce
 546 CFGH_TMPL       = config_H.ce
 547
 548 #
 549 # filenames given to xsubpp must have forward slashes (since it puts
 550 # full pathnames in #line strings)
 551 XSUBPP          = $(HPERL) -I..\..\lib -MCross=$(CROSS_NAME) ..\$(EXTUTILSDIR)\xsubpp \
 552                 -C++ -prototypes
 553
 554 MICROCORE_SRC   =               \
 555                 ..\av.c         \
 556                 ..\deb.c        \
 557                 ..\doio.c       \
 558                 ..\doop.c       \
 559                 ..\dump.c       \
 560                 ..\globals.c    \
 561                 ..\gv.c         \
 562                 ..\hv.c         \
 563                 ..\mg.c         \
 564                 ..\op.c         \
 565                 ..\pad.c        \
 566                 ..\perl.c       \
 567                 ..\perlapi.c    \
 568                 ..\perly.c      \
 569                 ..\pp.c         \
 570                 ..\pp_ctl.c     \
 571                 ..\pp_hot.c     \
 572                 ..\pp_pack.c    \
 573                 ..\pp_sort.c    \
 574                 ..\pp_sys.c     \
 575                 ..\reentr.c     \
 576                 ..\regcomp.c    \
 577                 ..\regexec.c    \
 578                 ..\run.c        \
 579                 ..\scope.c      \
 580                 ..\sv.c         \
 581                 ..\taint.c      \
 582                 ..\toke.c       \
 583                 ..\universal.c  \
 584                 ..\utf8.c       \
 585                 ..\util.c       \
 586                 ..\xsutils.c
 587
 588 EXTRACORE_SRC   = $(EXTRACORE_SRC) perllib.c
 589
 590 !IF "$(PERL_MALLOC)" == "define"
 591 EXTRACORE_SRC   = $(EXTRACORE_SRC) ..\malloc.c
 592 !ENDIF
 593
 594 EXTRACORE_SRC   = $(EXTRACORE_SRC) ..\perlio.c .\win32io.c
 595
 596 WIN32_SRC       =               \
 597                 .\wince.c       \
 598                 .\wincesck.c    \
 599                 .\win32thread.c
 600
 601 !IF "$(CRYPT_SRC)" != ""
 602 WIN32_SRC       = $(WIN32_SRC) .\$(CRYPT_SRC)
 603 !ENDIF
 604
 605 DLL_SRC         = $(DYNALOADER).c
 606
 607 CORE_NOCFG_H    =               \
 608                 ..\av.h         \
 609                 ..\cop.h        \
 610                 ..\cv.h         \
 611                 ..\dosish.h     \
 612                 ..\embed.h      \
 613                 ..\form.h       \
 614                 ..\gv.h         \
 615                 ..\handy.h      \
 616                 ..\hv.h         \
 617                 ..\iperlsys.h   \
 618                 ..\mg.h         \
 619                 ..\nostdio.h    \
 620                 ..\op.h         \
 621                 ..\opcode.h     \
 622                 ..\perl.h       \
 623                 ..\perlapi.h    \
 624                 ..\perlsdio.h   \
 625                 ..\perlsfio.h   \
 626                 ..\perly.h      \
 627                 ..\pp.h         \
 628                 ..\proto.h      \
 629                 ..\regexp.h     \
 630                 ..\scope.h      \
 631                 ..\sv.h         \
 632                 ..\thread.h     \
 633                 ..\unixish.h    \
 634                 ..\utf8.h       \
 635                 ..\util.h       \
 636                 ..\warnings.h   \
 637                 ..\XSUB.h       \
 638                 ..\EXTERN.h     \
 639                 ..\perlvars.h   \
 640                 ..\intrpvar.h   \
 641                 ..\thrdvar.h    \
 642                 .\include\dirent.h      \
 643                 .\include\netdb.h       \
 644                 .\include\sys\socket.h  \
 645                 .\win32.h
 646
 647 CORE_H          = $(CORE_NOCFG_H) .\config.h
 648
 649 MICROCORE_OBJ   = $(MICROCORE_SRC:.c=.obj)
 650 CORE_OBJ        = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
 651 WIN32_OBJ       = $(WIN32_SRC:.c=.obj)
 652 #WIN32_OBJ      = $(WIN32_OBJ:.\=.\$(DLLDIR)\)
 653 MINICORE_OBJ    = $(MICROCORE_OBJ:..\=.\$(DLLDIR)\)     \
 654                   $(MINIDIR)\miniperlmain$(o)   \
 655                   $(MINIDIR)\perlio$(o)
 656 MINIWIN32_OBJ   = $(WIN32_OBJ:.\=.\$(DLLDIR)\)
 657 MINI_OBJ        = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
 658 DLL_OBJ         = $(DLL_SRC:.c=.obj)
 659 X2P_OBJ         = $(X2P_SRC:.c=.obj)
 660
 661 PERLDLL_OBJ     = $(CORE_OBJ)
 662 PERLEXE_OBJ     = perlmain$(o)
 663
 664 PERLDLL_OBJ     = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
 665 #PERLEXE_OBJ    = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
 666
 667 !IF "$(USE_SETARGV)" != ""
 668 SETARGV_OBJ     = setargv$(o)
 669 !ENDIF
 670
 671 DYNAMIC_EXT     = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
 672                 Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
 673                 Sys/Hostname
 674
 675 STATIC_EXT      = DynaLoader
 676
 677 DYNALOADER      = $(EXTDIR)\DynaLoader\DynaLoader
 678
 679 ERRNO_PM        = $(LIBDIR)\Errno.pm
 680
 681
 682 EXTENSION_PM    =               \
 683                 $(ERRNO_PM)
 684
 685 POD2HTML        = $(PODDIR)\pod2html
 686 POD2MAN         = $(PODDIR)\pod2man
 687 POD2LATEX       = $(PODDIR)\pod2latex
 688 POD2TEXT        = $(PODDIR)\pod2text
 689
 690 CFG_VARS = \
 691  "INST_DRV=$(INST_DRV)" \
 692  "INST_TOP=$(INST_TOP)" \
 693  "INST_VER=$(INST_VER)" \
 694  "INST_ARCH=$(INST_ARCH)" \
 695  "archname=$(ARCHNAME)" \
 696  "CC=$(CC)" \
 697  "ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT)" \
 698  "cf_by=Rainer Keuchel" \
 699  "cf_email=$(EMAIL)" \
 700  "d_crypt=$(D_CRYPT)" \
 701  "d_mymalloc=$(PERL_MALLOC)" \
 702  "libs=$(LIBFILES)" \
 703  "incpath=$(CCINCDIR)" \
 704  "libperl=$(PERLIMPLIB_EXP)" \
 705  "libpth=$(LIBPATH)" \
 706  "libc=$(LIBC)" \
 707  "make=nmake" \
 708  "static_ext=$(STATIC_EXT)" \
 709  "dynamic_ext=$(DYNAMIC_EXT)" \
 710  "useithreads=$(USE_ITHREADS)" \
 711  "usemultiplicity=$(USE_MULTI)" \
 712  "useperlio=$(USE_PERLIO)" \
 713  "LINK_FLAGS=$(LDLIBPATH) $(LINK_FLAGS) $(SUBSYS)" \
 714  "optimize=$(OPTIMIZE)"
 715
 716 #
 717 # Top targets
 718 #
 719
 720 all: hostminiperl $(MINIMOD) $(CONFIGPM) $(PERLEXE) Extensions
 721
 722 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
 723
 724 $(CONFIGPM): .\config.h ..\config.sh ..\minimod.pl
 725         cd .. && $(HPERL) configpm --cross=$(CROSS_NAME) --no-glossary
 726         -mkdir $(XCOREDIR)
 727         $(XCOPY) ..\*.h $(XCOREDIR)\*.*
 728         $(XCOPY) ..\*.inc $(XCOREDIR)\*.*
 729         $(XCOPY) *.h $(XCOREDIR)\*.*
 730         $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
 731         $(RCOPY) include $(XCOREDIR)\*.*
 732         $(XCOPY) ..\win32\include $(XCOREDIR)\*.*
 733         -$(HPERL) -I..\lib -MCross=$(CROSS_NAME) config_h.PL "INST_VER=$(INST_VER)" "CORE_DIR=$(XCOREDIR)"
 734         if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
 735
 736 .\config.h:
 737         -del /f config.h
 738         copy config_H.ce config.h
 739
 740 ..\config.sh: config.ce config_sh.PL
 741         $(HPERL) -I..\lib -I..\win32 config_sh.PL $(CFG_VARS) config.ce > ..\config.sh
 742
 743 $(MINIMOD) : ..\minimod.pl
 744         cd .. && $(HPERL) minimod.pl > lib\ExtUtils\Miniperl.pm
 745
 746 perlmain.c : runperl.c
 747         $(COPY) runperl.c perlmain.c
 748
 749 $(DYNALOADER).c: $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
 750         if not exist $(AUTODIR) mkdir $(AUTODIR)
 751         cd $(EXTDIR)\$(*B)
 752         $(HPERL) -I..\..\lib -MCross=$(CROSS_NAME) $(*B)_pm.PL
 753         $(HPERL) -I..\..\lib -MCross=$(CROSS_NAME) XSLoader_pm.PL
 754         cd ..\..\wince
 755         $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
 756         $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
 757         cd $(EXTDIR)\$(*B)
 758         $(XSUBPP) dl_win32.xs > $(*B).c
 759         cd ..\..\wince
 760
 761 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
 762         $(COPY) dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
 763
 764 #----------------------------------------------------------------------------------
 765 NOT_COMPILE_EXT =
 766 !if "$(MACHINE)" == "wince-sh3-palm-wce211"
 767 NOT_COMPILE_EXT = $(NOT_COMPILE_EXT) !XS/Typemap
 768 !endif
 769 !if "$(MACHINE)" == "wince-mips-palm-wce211"
 770 NOT_COMPILE_EXT = $(NOT_COMPILE_EXT) !XS/Typemap
 771 !endif
 772
 773 Extensions: ..\win32\buildext.pl $(PERLDEP) $(CONFIGPM)
 774         $(HPERL) -I..\lib -I..\win32 -MCross=$(CROSS_NAME) ..\win32\buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) \
 775         !POSIX $(NOT_COMPILE_EXT)
 776
 777 Extensions_clean:
 778         -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
 779
 780 #----------------------------------------------------------------------------------
 781
 782 $(PERLEXE_RES): perl.rc perl.ico
 783         rc $(RCDEFS) perl.rc
 784
 785 clean:
 786         -rm -f $(MACHINE)/dll/*
 787         -rm -f $(MACHINE)/*.obj
 788         -rm -f $(MACHINE)/*.exe
 789         -rm -f $(MACHINE)/*.dll
 790         -rm -f $(MACHINE)/*.lib
 791         -rm -f ../config.sh ../lib/Config.pm
 792         -rm -f config.h perl.res
 793
 794 XDLLOBJS = \
 795 $(DLLDIR)\av.obj \
 796 $(DLLDIR)\deb.obj \
 797 $(DLLDIR)\doio.obj \
 798 $(DLLDIR)\doop.obj \
 799 $(DLLDIR)\dump.obj \
 800 $(DLLDIR)\globals.obj \
 801 $(DLLDIR)\gv.obj \
 802 $(DLLDIR)\hv.obj \
 803 $(DLLDIR)\locale.obj \
 804 $(DLLDIR)\mg.obj \
 805 $(DLLDIR)\numeric.obj \
 806 $(DLLDIR)\op.obj \
 807 $(DLLDIR)\pad.obj \
 808 $(DLLDIR)\perl.obj \
 809 $(DLLDIR)\perlapi.obj \
 810 $(DLLDIR)\perlio.obj \
 811 $(DLLDIR)\perly.obj \
 812 $(DLLDIR)\pp.obj \
 813 $(DLLDIR)\pp_ctl.obj \
 814 $(DLLDIR)\pp_hot.obj \
 815 $(DLLDIR)\pp_pack.obj \
 816 $(DLLDIR)\pp_sort.obj \
 817 $(DLLDIR)\pp_sys.obj \
 818 $(DLLDIR)\reentr.obj \
 819 $(DLLDIR)\regcomp.obj \
 820 $(DLLDIR)\regexec.obj \
 821 $(DLLDIR)\run.obj \
 822 $(DLLDIR)\scope.obj \
 823 $(DLLDIR)\sv.obj \
 824 $(DLLDIR)\taint.obj \
 825 $(DLLDIR)\toke.obj \
 826 $(DLLDIR)\universal.obj \
 827 $(DLLDIR)\utf8.obj \
 828 $(DLLDIR)\util.obj \
 829 $(DLLDIR)\win32thread.obj \
 830 $(DLLDIR)\wince.obj \
 831 $(DLLDIR)\win32io.obj \
 832 $(DLLDIR)\wincesck.obj \
 833 $(DLLDIR)\xsutils.obj \
 834 $(DLLDIR)\perllib.obj \
 835 $(DLLDIR)\DynaLoader.obj
 836 !IF "$(PERL_MALLOC)" == "define"
 837 XDLLOBJS        = $(XDLLOBJS) $(DLLDIR)\malloc.obj
 838 !ENDIF
 839 !IF "$(CRYPT_SRC)" != ""
 840 XDLLOBJS        = $(XDLLOBJS) $(DLLDIR)\fcrypt.obj
 841 !ENDIF
 842
 843 {$(SRCDIR)}.c{$(DLLDIR)}.obj:
 844     $(CC) -c $(CFLAGS_O) -DPERL_EXTERNAL_GLOB -Fo$(DLLDIR)\ $<
 845
 846 # compiler explains that it will optimize toke.c if we'll give it an
 847 # option -QMOb<num> with num>=4178
 848 $(DLLDIR)\toke.obj:
 849     $(CC) -c $(CFLAGS_O) -QMOb9000 -DPERL_EXTERNAL_GLOB -Fo$(DLLDIR)\ ..\toke.c
 850
 851 {$(SRCDIR)/wince}.c{$(DLLDIR)}.obj:
 852     $(CC) -c $(CFLAGS_O) -DPERL_EXTERNAL_GLOB -Fo$(DLLDIR)\ $<
 853
 854 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
 855 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
 856 !IF "$(USE_IMP_SYS)" == "define"
 857 $(DLLDIR)\perllib$(o)   : perllib.c .\perlhost.h .\vdir.h .\vmem.h
 858         $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
 859         rem (frustrated) mv perllib.obj $(DLLDIR)
 860 !ENDIF
 861
 862 perldll.def : $(HPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
 863         $(HPERL) -w ..\makedef.pl PLATFORM=wince $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
 864             CCTYPE=$(CCTYPE) -DPERL_DLL=$(PERLDLL) > perldll.def
 865
 866 $(PERLDLL) : $(DLLDIR) perldll.def $(XDLLOBJS) $(PERLDLL_RES)
 867         $(LINK32) -dll -def:perldll.def -out:$@ \
 868                   $(SUBSYS) $(LDLIBPATH) \
 869                   $(LINK_FLAGS) $(LIBFILES) \
 870                   $(XDLLOBJS) $(PERLDLL_RES)
 871
 872 $(DLLDIR) :
 873         if not exist "$(DLLDIR)" mkdir "$(DLLDIR)"
 874
 875 $(DLLDIR)\DynaLoader.obj: $(EXTDIR)\DynaLoader\DynaLoader.c
 876     $(CC) -c $(CFLAGS_O) -DPERL_EXTERNAL_GLOB -Fo$(DLLDIR)\ \
 877           $(EXTDIR)\DynaLoader\DynaLoader.c
 878
 879 XPERLEXEOBJS = \
 880 $(MACHINE)\perlmain.obj
 881
 882 $(PERLEXE) : $(PERLDLL) $(CONFIGPM) $(XPERLEXEOBJS) $(PERLEXE_RES) $(STARTOBJS)
 883         $(XCOPY) $(MACHINE)\*.lib $(XCOREDIR)
 884         $(LINK32) $(SUBSYS) $(LDLIBPATH) \
 885             -entry:wWinMainCRTStartup \
 886             -out:$(MACHINE)\perl.exe \
 887             -stack:0x100000 $(LINK_FLAGS) $(STARTOBJS) $(XPERLEXEOBJS) \
 888             $(PERLIMPLIB) $(PERLEXE_RES) $(LIBFILES)
 889
 890 $(MACHINE)\perlmain.obj : perlmain.c
 891         $(CC) $(CFLAGS_O) -UPERLDLL -Fo$(MACHINE)\ -c perlmain.c
 892
 893 iodll:     $(IO_DLL)
 894 socketdll: $(SOCKET_DLL)
 895 dumperdll: $(DUMPER_DLL)
 896
 897 dlls: socketdll iodll dumperdll
 898         -xmkdir -p $(MACHINE)/lib/auto/IO
 899         cp ../lib/auto/IO/IO.bs $(MACHINE)/lib/auto/IO
 900         cp ../lib/auto/IO/IO.dll $(MACHINE)/lib/auto/IO
 901         -xmkdir $(MACHINE)/lib/auto/Socket
 902         cp ../lib/auto/Socket/Socket.bs $(MACHINE)/lib/auto/Socket
 903         cp ../lib/auto/Socket/Socket.dll $(MACHINE)/lib/auto/Socket
 904         -xmkdir -p $(MACHINE)/lib/auto/Data/Dumper
 905         cp ../lib/auto/Data/Dumper/Dumper.bs $(MACHINE)/lib/auto/Data/Dumper
 906         cp ../lib/auto/Data/Dumper/Dumper.dll $(MACHINE)/lib/auto/Data/Dumper
 907
 908 makedist: all dlls
 909         $(COPY) $(CELIBPATH)\celib.dll $(MACHINE)
 910         cp perl.txt $(MACHINE)
 911         cp registry.bat $(MACHINE)
 912         cp ../lib/Config.pm $(MACHINE)/lib
 913         cd $(MACHINE)
 914         rm -f perl-$(MACHINE).tar.gz
 915         sh -c "tar cf perl-$(MACHINE).tar *.exe *.dll *.txt *.bat lib"
 916         gzip -9 perl-$(MACHINE).tar
 917         mv perl-$(MACHINE).tar.gz h:/freenet/new
 918         cd ..
 919
 920 !if "$(MACHINE)" == "wince-arm-hpc-wce300"
 921 install: all
 922         $(CECOPY) pc:$(MACHINE)/perl.exe ce:$(INSTALL_ROOT)/bin
 923         $(CECOPY) pc:$(MACHINE)/perl$(PV).dll ce:$(INSTALL_ROOT)/bin
 924 install_dlls: dlls
 925         $(CECOPY) pc:../lib/auto/IO/io.dll ce:$(INSTALL_ROOT)/lib/auto/IO/io.dll
 926 !else
 927 install: all
 928         -cemkdir "$(INSTALL_ROOT)"
 929         -cemkdir "$(INSTALL_ROOT)\bin"
 930         -cemkdir "$(INSTALL_ROOT)\lib"
 931         $(CECOPY) "pc:$(MACHINE)/perl.exe" "ce:$(INSTALL_ROOT)/bin"
 932         $(CECOPY) "pc:$(MACHINE)/perl$(PV).dll" "ce:$(INSTALL_ROOT)/bin"
 933         $(CECOPY) "pc:../xlib/$(CROSS_NAME)/Config.pm" "ce:$(INSTALL_ROOT)/lib"
 934 !endif
 935
 936 dist: all
 937         $(HPERL) -I..\lib -MCross=$(CROSS_NAME) makedist.pl --distdir=dist-$(CROSS_NAME) --cross-name=$(CROSS_NAME)
 938
 939 zipdist: all
 940         $(HPERL) -I..\lib -MCross=$(CROSS_NAME) makedist.pl --distdir=dist-$(CROSS_NAME) --cross-name=$(CROSS_NAME)
 941         $(HPERL) -I..\lib -MCross=$(CROSS_NAME) makedist.pl --distdir=dist-$(CROSS_NAME) --cross-name=$(CROSS_NAME) --zip
 942
 943 zip:
 944         $(HPERL) -I..\lib -MCross=$(CROSS_NAME) makedist.pl --distdir=dist-$(CROSS_NAME) --cross-name=$(CROSS_NAME) --zip
 945
 946 perl.ico:
 947         $(HPERL) makeico.pl
 948
 949 hostminiperl: ..\miniperl.exe
 950
 951 ..\miniperl.exe:
 952         cd ../win32
 953         set PATH=$(CCHOME)\bin;$(PATH)
 954         $(MAKE) -f Makefile "CCHOME=$(MSVCDIR)" "CCINCDIR=$(CCHOME)\include" "CCLIBDIR=$(CCHOME)\lib" "INCLUDE=$(CCHOME)\include" "LIB=$(CCHOME)\lib" "LINK_FLAGS=" .\config.h ..\miniperl.exe
 955         cd ../wince
 956
 957 host-install:
 958         perl -MConfig -MExtUtils::Install -we "install({'../lib/CORE', qq#$$Config{installprefixexp}/xlib/$(CROSS_NAME)/CORE#},1)"
 959         perl -MConfig -MExtUtils::Install -we "install({'../xlib/$(CROSS_NAME)', qq#$$Config{installprefixexp}/xlib/$(CROSS_NAME)#},1)"
 960         perl -MConfig -MFile::Copy -we "copy qq#./$(MACHINE)/perl$(PV).lib#, qq#$$Config{installprefixexp}/xlib/$(CROSS_NAME)/CORE#"
 961         perl -MConfig -MFile::Copy -we "copy qq#../lib/Cross.pm#, qq#$$Config{installprefixexp}/lib#"
 962         perl -MConfig -we "system qq#perl -pi.bak -we \"s{((arch^|priv)libexp)='.*'}{\$$1='# . \
 963          quotemeta($$Config{installprefixexp}) . \
 964          qq#/xlib/$(CROSS_NAME)'}\" $$Config{installprefixexp}/xlib/$(CROSS_NAME)/Config.pm#"