4 perl5db.pl - the perl debugger
8 perl -d your_Perl_script
12 C<perl5db.pl> is the perl debugger. It is loaded automatically by Perl when
13 you invoke a script with C<perl -d>. This documentation tries to outline the
14 structure and services provided by C<perl5db.pl>, and to describe how you
19 The debugger can look pretty forbidding to many Perl programmers. There are
20 a number of reasons for this, many stemming out of the debugger's history.
22 When the debugger was first written, Perl didn't have a lot of its nicer
23 features - no references, no lexical variables, no closures, no object-oriented
24 programming. So a lot of the things one would normally have done using such
25 features was done using global variables, globs and the C<local()> operator
28 Some of these have survived into the current debugger; a few of the more
29 interesting and still-useful idioms are noted in this section, along with notes
30 on the comments themselves.
32 =head2 Why not use more lexicals?
34 Experienced Perl programmers will note that the debugger code tends to use
35 mostly package globals rather than lexically-scoped variables. This is done
36 to allow a significant amount of control of the debugger from outside the
39 Unfortunately, though the variables are accessible, they're not well
40 documented, so it's generally been a decision that hasn't made a lot of
41 difference to most users. Where appropriate, comments have been added to
42 make variables more accessible and usable, with the understanding that these
43 I<are> debugger internals, and are therefore subject to change. Future
44 development should probably attempt to replace the globals with a well-defined
45 API, but for now, the variables are what we've got.
47 =head2 Automated variable stacking via C<local()>
49 As you may recall from reading C<perlfunc>, the C<local()> operator makes a
50 temporary copy of a variable in the current scope. When the scope ends, the
51 old copy is restored. This is often used in the debugger to handle the
52 automatic stacking of variables during recursive calls:
57 # Do some stuff, then ...
61 What happens is that on entry to the subroutine, C<$some_global> is localized,
62 then altered. When the subroutine returns, Perl automatically undoes the
63 localization, restoring the previous value. Voila, automatic stack management.
65 The debugger uses this trick a I<lot>. Of particular note is C<DB::eval>,
66 which lets the debugger get control inside of C<eval>'ed code. The debugger
67 localizes a saved copy of C<$@> inside the subroutine, which allows it to
68 keep C<$@> safe until it C<DB::eval> returns, at which point the previous
69 value of C<$@> is restored. This makes it simple (well, I<simpler>) to keep
70 track of C<$@> inside C<eval>s which C<eval> other C<eval's>.
72 In any case, watch for this pattern. It occurs fairly often.
76 This is used to cleverly reverse the sense of a logical test depending on
77 the value of an auxiliary variable. For instance, the debugger's C<S>
78 (search for subroutines by pattern) allows you to negate the pattern
81 # Find all non-'foo' subs:
84 Boolean algebra states that the truth table for XOR looks like this:
90 (! not present and no match) --> false, don't print
94 (! not present and matches) --> true, print
98 (! present and no match) --> true, print
102 (! present and matches) --> false, don't print
106 As you can see, the first pair applies when C<!> isn't supplied, and
107 the second pair applies when it is. The XOR simply allows us to
108 compact a more complicated if-then-elseif-else into a more elegant
109 (but perhaps overly clever) single test. After all, it needed this
112 =head2 FLAGS, FLAGS, FLAGS
114 There is a certain C programming legacy in the debugger. Some variables,
115 such as C<$single>, C<$trace>, and C<$frame>, have I<magical> values composed
116 of 1, 2, 4, etc. (powers of 2) OR'ed together. This allows several pieces
117 of state to be stored independently in a single scalar.
123 is checking to see if the appropriate bit is on. Since each bit can be
124 "addressed" independently in this way, C<$scalar> is acting sort of like
125 an array of bits. Obviously, since the contents of C<$scalar> are just a
126 bit-pattern, we can save and restore it easily (it will just look like
129 The problem, is of course, that this tends to leave magic numbers scattered
130 all over your program whenever a bit is set, cleared, or checked. So why do
137 First, doing an arithmetical or bitwise operation on a scalar is
138 just about the fastest thing you can do in Perl: C<use constant> actually
139 creates a subroutine call, and array and hash lookups are much slower. Is
140 this over-optimization at the expense of readability? Possibly, but the
141 debugger accesses these variables a I<lot>. Any rewrite of the code will
142 probably have to benchmark alternate implementations and see which is the
143 best balance of readability and speed, and then document how it actually
148 Second, it's very easy to serialize a scalar number. This is done in
149 the restart code; the debugger state variables are saved in C<%ENV> and then
150 restored when the debugger is restarted. Having them be just numbers makes
155 Third, some of these variables are being shared with the Perl core
156 smack in the middle of the interpreter's execution loop. It's much faster for
157 a C program (like the interpreter) to check a bit in a scalar than to access
158 several different variables (or a Perl array).
162 =head2 What are those C<XXX> comments for?
164 Any comment containing C<XXX> means that the comment is either somewhat
165 speculative - it's not exactly clear what a given variable or chunk of
166 code is doing, or that it is incomplete - the basics may be clear, but the
167 subtleties are not completely documented.
169 Send in a patch if you can clear up, fill out, or clarify an C<XXX>.
171 =head1 DATA STRUCTURES MAINTAINED BY CORE
173 There are a number of special data structures provided to the debugger by
174 the Perl interpreter.
176 The array C<@{$main::{'_<'.$filename}}> (aliased locally to C<@dbline>
177 via glob assignment) contains the text from C<$filename>, with each
178 element corresponding to a single line of C<$filename>. Additionally,
179 breakable lines will be dualvars with the numeric component being the
180 memory address of a COP node. Non-breakable lines are dualvar to 0.
182 The hash C<%{'_<'.$filename}> (aliased locally to C<%dbline> via glob
183 assignment) contains breakpoints and actions. The keys are line numbers;
184 you can set individual values, but not the whole hash. The Perl interpreter
185 uses this hash to determine where breakpoints have been set. Any true value is
186 considered to be a breakpoint; C<perl5db.pl> uses C<$break_condition\0$action>.
187 Values are magical in numeric context: 1 if the line is breakable, 0 if not.
189 The scalar C<${"_<$filename"}> simply contains the string C<_<$filename>.
190 This is also the case for evaluated strings that contain subroutines, or
191 which are currently being executed. The $filename for C<eval>ed strings looks
192 like C<(eval 34)> or C<(re_eval 19)>.
194 =head1 DEBUGGER STARTUP
196 When C<perl5db.pl> starts, it reads an rcfile (C<perl5db.ini> for
197 non-interactive sessions, C<.perldb> for interactive ones) that can set a number
198 of options. In addition, this file may define a subroutine C<&afterinit>
199 that will be executed (in the debugger's context) after the debugger has
202 Next, it checks the C<PERLDB_OPTS> environment variable and treats its
203 contents as the argument of a C<o> command in the debugger.
205 =head2 STARTUP-ONLY OPTIONS
207 The following options can only be specified at startup.
208 To set them in your rcfile, add a call to
209 C<&parse_options("optionName=new_value")>.
215 the TTY to use for debugging i/o.
219 if set, goes in NonStop mode. On interrupt, if TTY is not set,
220 uses the value of noTTY or F<$HOME/.perldbtty$$> to find TTY using
221 Term::Rendezvous. Current variant is to have the name of TTY in this
226 if false, a dummy ReadLine is used, so you can debug
227 ReadLine applications.
231 if true, no i/o is performed until interrupt.
235 file or pipe to print line number info to. If it is a
236 pipe, a short "emacs like" message is used.
240 host:port to connect to on remote host for remote debugging.
244 file to store session history to. There is no default and so no
245 history file is written unless this variable is explicitly set.
249 number of commands to store to the file specified in C<HistFile>.
256 &parse_options("NonStop=1 LineInfo=db.out");
257 sub afterinit { $trace = 1; }
259 The script will run without human intervention, putting trace
260 information into C<db.out>. (If you interrupt it, you had better
261 reset C<LineInfo> to something I<interactive>!)
263 =head1 INTERNALS DESCRIPTION
265 =head2 DEBUGGER INTERFACE VARIABLES
267 Perl supplies the values for C<%sub>. It effectively inserts
268 a C<&DB::DB();> in front of each place that can have a
269 breakpoint. At each subroutine call, it calls C<&DB::sub> with
270 C<$DB::sub> set to the called subroutine. It also inserts a C<BEGIN
271 {require 'perl5db.pl'}> before the first line.
273 After each C<require>d file is compiled, but before it is executed, a
274 call to C<&DB::postponed($main::{'_<'.$filename})> is done. C<$filename>
275 is the expanded name of the C<require>d file (as found via C<%INC>).
277 =head3 IMPORTANT INTERNAL VARIABLES
281 Used to control when the debugger will attempt to acquire another TTY to be
286 =item * 1 - on C<fork()>
288 =item * 2 - debugger is started inside debugger
290 =item * 4 - on startup
296 The value -2 indicates that no return value should be printed.
297 Any other positive value causes C<DB::sub> to print return values.
301 The item to be eval'ed by C<DB::eval>. Used to prevent messing with the current
302 contents of C<@_> when C<DB::eval> is called.
306 Determines what messages (if any) will get printed when a subroutine (or eval)
307 is entered or exited.
311 =item * 0 - No enter/exit messages
313 =item * 1 - Print I<entering> messages on subroutine entry
315 =item * 2 - Adds exit messages on subroutine exit. If no other flag is on, acts like 1+2.
317 =item * 4 - Extended messages: C<< <in|out> I<context>=I<fully-qualified sub name> from I<file>:I<line> >>. If no other flag is on, acts like 1+4.
319 =item * 8 - Adds parameter information to messages, and overloaded stringify and tied FETCH is enabled on the printed arguments. Ignored if C<4> is not on.
321 =item * 16 - Adds C<I<context> return from I<subname>: I<value>> messages on subroutine/eval exit. Ignored if C<4> is is not on.
325 To get everything, use C<$frame=30> (or C<o f=30> as a debugger command).
326 The debugger internally juggles the value of C<$frame> during execution to
327 protect external modules that the debugger uses from getting traced.
331 Tracks current debugger nesting level. Used to figure out how many
332 C<E<lt>E<gt>> pairs to surround the line number with when the debugger
333 outputs a prompt. Also used to help determine if the program has finished
334 during command parsing.
336 =head4 C<$onetimeDump>
338 Controls what (if anything) C<DB::eval()> will print after evaluating an
343 =item * C<undef> - don't print anything
345 =item * C<dump> - use C<dumpvar.pl> to display the value returned
347 =item * C<methods> - print the methods callable on the first item returned
351 =head4 C<$onetimeDumpDepth>
353 Controls how far down C<dumpvar.pl> will go before printing C<...> while
354 dumping a structure. Numeric. If C<undef>, print all levels.
358 Used to track whether or not an C<INT> signal has been detected. C<DB::DB()>,
359 which is called before every statement, checks this and puts the user into
360 command mode if it finds C<$signal> set to a true value.
364 Controls behavior during single-stepping. Stacked in C<@stack> on entry to
365 each subroutine; popped again at the end of each subroutine.
369 =item * 0 - run continuously.
371 =item * 1 - single-step, go into subs. The C<s> command.
373 =item * 2 - single-step, don't go into subs. The C<n> command.
375 =item * 4 - print current sub depth (turned on to force this when C<too much
382 Controls the output of trace information.
386 =item * 1 - The C<t> command was entered to turn on tracing (every line executed is printed)
388 =item * 2 - watch expressions are active
390 =item * 4 - user defined a C<watchfunction()> in C<afterinit()>
394 =head4 C<$slave_editor>
396 1 if C<LINEINFO> was directed to a pipe; 0 otherwise.
400 Stack of filehandles that C<DB::readline()> will read commands from.
401 Manipulated by the debugger's C<source> command and C<DB::readline()> itself.
405 Local alias to the magical line array, C<@{$main::{'_<'.$filename}}> ,
406 supplied by the Perl interpreter to the debugger. Contains the source.
410 Previous values of watch expressions. First set when the expression is
411 entered; reset whenever the watch expression changes.
415 Saves important globals (C<$@>, C<$!>, C<$^E>, C<$,>, C<$/>, C<$\>, C<$^W>)
416 so that the debugger can substitute safe values while it's running, and
417 restore them when it returns control.
421 Saves the current value of C<$single> on entry to a subroutine.
422 Manipulated by the C<c> command to turn off tracing in all subs above the
427 The 'watch' expressions: to be evaluated before each line is executed.
431 The typeahead buffer, used by C<DB::readline>.
435 Command aliases. Stored as character strings to be substituted for a command
438 =head4 C<%break_on_load>
440 Keys are file names, values are 1 (break when this file is loaded) or undef
441 (don't break when it is loaded).
445 Keys are line numbers, values are C<condition\0action>. If used in numeric
446 context, values are 0 if not breakable, 1 if breakable, no matter what is
447 in the actual hash entry.
449 =head4 C<%had_breakpoints>
451 Keys are file names; values are bitfields:
455 =item * 1 - file has a breakpoint in it.
457 =item * 2 - file has an action in it.
461 A zero or undefined value means this file has neither.
465 Stores the debugger options. These are character string values.
469 Saves breakpoints for code that hasn't been compiled yet.
470 Keys are subroutine names, values are:
474 =item * C<compile> - break when this sub is compiled
476 =item * C<< break +0 if <condition> >> - break (conditionally) at the start of this routine. The condition will be '1' if no condition was specified.
480 =head4 C<%postponed_file>
482 This hash keeps track of breakpoints that need to be set for files that have
483 not yet been compiled. Keys are filenames; values are references to hashes.
484 Each of these hashes is keyed by line number, and its values are breakpoint
485 definitions (C<condition\0action>).
487 =head1 DEBUGGER INITIALIZATION
489 The debugger's initialization actually jumps all over the place inside this
490 package. This is because there are several BEGIN blocks (which of course
491 execute immediately) spread through the code. Why is that?
493 The debugger needs to be able to change some things and set some things up
494 before the debugger code is compiled; most notably, the C<$deep> variable that
495 C<DB::sub> uses to tell when a program has recursed deeply. In addition, the
496 debugger has to turn off warnings while the debugger code is compiled, but then
497 restore them to their original setting before the program being debugged begins
500 The first C<BEGIN> block simply turns off warnings by saving the current
501 setting of C<$^W> and then setting it to zero. The second one initializes
502 the debugger variables that are needed before the debugger begins executing.
503 The third one puts C<$^X> back to its former value.
505 We'll detail the second C<BEGIN> block later; just remember that if you need
506 to initialize something before the debugger starts really executing, that's
513 BEGIN {eval 'use IO::Handle'}; # Needed for flush only? breaks under miniperl
517 $^V =~ /^v(\d+\.\d+)/;
518 feature->import(":$1");
521 # Debugger for Perl 5.00x; perl5db.pl patch level:
524 $header = "perl5db.pl version $VERSION";
526 =head1 DEBUGGER ROUTINES
530 This function replaces straight C<eval()> inside the debugger; it simplifies
531 the process of evaluating code in the user's context.
533 The code to be evaluated is passed via the package global variable
534 C<$DB::evalarg>; this is done to avoid fiddling with the contents of C<@_>.
536 Before we do the C<eval()>, we preserve the current settings of C<$trace>,
537 C<$single>, C<$^D> and C<$usercontext>. The latter contains the
538 preserved values of C<$@>, C<$!>, C<$^E>, C<$,>, C<$/>, C<$\>, C<$^W> and the
539 user's current package, grabbed when C<DB::DB> got control. This causes the
540 proper context to be used when the eval is actually done. Afterward, we
541 restore C<$trace>, C<$single>, and C<$^D>.
543 Next we need to handle C<$@> without getting confused. We save C<$@> in a
544 local lexical, localize C<$saved[0]> (which is where C<save()> will put
545 C<$@>), and then call C<save()> to capture C<$@>, C<$!>, C<$^E>, C<$,>,
546 C<$/>, C<$\>, and C<$^W>) and set C<$,>, C<$/>, C<$\>, and C<$^W> to values
547 considered sane by the debugger. If there was an C<eval()> error, we print
548 it on the debugger's output. If C<$onetimedump> is defined, we call
549 C<dumpit> if it's set to 'dump', or C<methods> if it's set to
550 'methods'. Setting it to something else causes the debugger to do the eval
551 but not print the result - handy if you want to do something else with it
552 (the "watch expressions" code does this to get the value of the watch
553 expression but not show it unless it matters).
555 In any case, we then return the list of output from C<eval> to the caller,
556 and unwinding restores the former version of C<$@> in C<@saved> as well
557 (the localization of C<$saved[0]> goes away at the end of this scope).
559 =head3 Parameters and variables influencing execution of DB::eval()
561 C<DB::eval> isn't parameterized in the standard way; this is to keep the
562 debugger's calls to C<DB::eval()> from mucking with C<@_>, among other things.
563 The variables listed below influence C<DB::eval()>'s execution directly.
567 =item C<$evalarg> - the thing to actually be eval'ed
569 =item C<$trace> - Current state of execution tracing
571 =item C<$single> - Current state of single-stepping
573 =item C<$onetimeDump> - what is to be displayed after the evaluation
575 =item C<$onetimeDumpDepth> - how deep C<dumpit()> should go when dumping results
579 The following variables are altered by C<DB::eval()> during its execution. They
580 are "stacked" via C<local()>, enabling recursive calls to C<DB::eval()>.
584 =item C<@res> - used to capture output from actual C<eval>.
586 =item C<$otrace> - saved value of C<$trace>.
588 =item C<$osingle> - saved value of C<$single>.
590 =item C<$od> - saved value of C<$^D>.
592 =item C<$saved[0]> - saved value of C<$@>.
594 =item $\ - for output of C<$@> if there is an evaluation error.
598 =head3 The problem of lexicals
600 The context of C<DB::eval()> presents us with some problems. Obviously,
601 we want to be 'sandboxed' away from the debugger's internals when we do
602 the eval, but we need some way to control how punctuation variables and
603 debugger globals are used.
605 We can't use local, because the code inside C<DB::eval> can see localized
606 variables; and we can't use C<my> either for the same reason. The code
607 in this routine compromises and uses C<my>.
609 After this routine is over, we don't have user code executing in the debugger's
610 context, so we can use C<my> freely.
614 ############################################## Begin lexical danger zone
616 # 'my' variables used here could leak into (that is, be visible in)
617 # the context that the code being evaluated is executing in. This means that
618 # the code could modify the debugger's variables.
620 # Fiddling with the debugger's context could be Bad. We insulate things as
625 # 'my' would make it visible from user code
626 # but so does local! --tchrist
627 # Remember: this localizes @DB::res, not @main::res.
631 # Try to keep the user code from messing with us. Save these so that
632 # even if the eval'ed code changes them, we can put them back again.
633 # Needed because the user could refer directly to the debugger's
634 # package globals (and any 'my' variables in this containing scope)
635 # inside the eval(), and we want to try to stay safe.
636 local $otrace = $trace;
637 local $osingle = $single;
640 # Untaint the incoming eval() argument.
641 { ($evalarg) = $evalarg =~ /(.*)/s; }
643 # $usercontext built in DB::DB near the comment
644 # "set up the context for DB::eval ..."
645 # Evaluate and save any results.
646 @res = eval "$usercontext $evalarg;\n"; # '\n' for nice recursive debug
648 # Restore those old values.
654 # Save the current value of $@, and preserve it in the debugger's copy
655 # of the saved precious globals.
658 # Since we're only saving $@, we only have to localize the array element
659 # that it will be stored in.
660 local $saved[0]; # Preserve the old value of $@
663 # Now see whether we need to report an error back to the user.
669 # Display as required by the caller. $onetimeDump and $onetimedumpDepth
670 # are package globals.
671 elsif ($onetimeDump) {
672 if ( $onetimeDump eq 'dump' ) {
673 local $option{dumpDepth} = $onetimedumpDepth
674 if defined $onetimedumpDepth;
675 dumpit( $OUT, \@res );
677 elsif ( $onetimeDump eq 'methods' ) {
680 } ## end elsif ($onetimeDump)
684 ############################################## End lexical danger zone
686 # After this point it is safe to introduce lexicals.
687 # The code being debugged will be executing in its own context, and
688 # can't see the inside of the debugger.
690 # However, one should not overdo it: leave as much control from outside as
691 # possible. If you make something a lexical, it's not going to be addressable
692 # from outside the debugger even if you know its name.
694 # This file is automatically included if you do perl -d.
695 # It's probably not useful to include this yourself.
697 # Before venturing further into these twisty passages, it is
698 # wise to read the perldebguts man page or risk the ire of dragons.
700 # (It should be noted that perldebguts will tell you a lot about
701 # the underlying mechanics of how the debugger interfaces into the
702 # Perl interpreter, but not a lot about the debugger itself. The new
703 # comments in this code try to address this problem.)
705 # Note that no subroutine call is possible until &DB::sub is defined
706 # (for subroutines defined outside of the package DB). In fact the same is
707 # true if $deep is not defined.
709 # Enhanced by ilya@math.ohio-state.edu (Ilya Zakharevich)
711 # modified Perl debugger, to be run from Emacs in perldb-mode
712 # Ray Lischner (uunet!mntgfx!lisch) as of 5 Nov 1990
713 # Johan Vromans -- upgrade to 4.0 pl 10
714 # Ilya Zakharevich -- patches after 5.001 (and some before ;-)
716 # (We have made efforts to clarify the comments in the change log
717 # in other places; some of them may seem somewhat obscure as they
718 # were originally written, and explaining them away from the code
719 # in question seems conterproductive.. -JM)
721 ########################################################################
723 # + A lot of things changed after 0.94. First of all, core now informs
724 # debugger about entry into XSUBs, overloaded operators, tied operations,
725 # BEGIN and END. Handy with 'O f=2'.
726 # + This can make debugger a little bit too verbose, please be patient
727 # and report your problems promptly.
728 # + Now the option frame has 3 values: 0,1,2. XXX Document!
729 # + Note that if DESTROY returns a reference to the object (or object),
730 # the deletion of data may be postponed until the next function call,
731 # due to the need to examine the return value.
734 # + 'v' command shows versions.
737 # + 'v' command shows version of readline.
738 # primitive completion works (dynamic variables, subs for 'b' and 'l',
739 # options). Can 'p %var'
740 # + Better help ('h <' now works). New commands <<, >>, {, {{.
741 # {dump|print}_trace() coded (to be able to do it from <<cmd).
742 # + 'c sub' documented.
743 # + At last enough magic combined to stop after the end of debuggee.
744 # + !! should work now (thanks to Emacs bracket matching an extra
745 # ']' in a regexp is caught).
746 # + 'L', 'D' and 'A' span files now (as documented).
747 # + Breakpoints in 'require'd code are possible (used in 'R').
748 # + Some additional words on internal work of debugger.
749 # + 'b load filename' implemented.
750 # + 'b postpone subr' implemented.
751 # + now only 'q' exits debugger (overwritable on $inhibit_exit).
752 # + When restarting debugger breakpoints/actions persist.
753 # + Buglet: When restarting debugger only one breakpoint/action per
754 # autoloaded function persists.
756 # Changes: 0.97: NonStop will not stop in at_exit().
757 # + Option AutoTrace implemented.
758 # + Trace printed differently if frames are printed too.
759 # + new 'inhibitExit' option.
760 # + printing of a very long statement interruptible.
761 # Changes: 0.98: New command 'm' for printing possible methods
762 # + 'l -' is a synonym for '-'.
763 # + Cosmetic bugs in printing stack trace.
764 # + 'frame' & 8 to print "expanded args" in stack trace.
765 # + Can list/break in imported subs.
766 # + new 'maxTraceLen' option.
767 # + frame & 4 and frame & 8 granted.
769 # + nonstoppable lines do not have ':' near the line number.
770 # + 'b compile subname' implemented.
771 # + Will not use $` any more.
772 # + '-' behaves sane now.
773 # Changes: 0.99: Completion for 'f', 'm'.
774 # + 'm' will remove duplicate names instead of duplicate functions.
775 # + 'b load' strips trailing whitespace.
776 # completion ignores leading '|'; takes into account current package
777 # when completing a subroutine name (same for 'l').
778 # Changes: 1.07: Many fixed by tchrist 13-March-2000
780 # + Added bare minimal security checks on perldb rc files, plus
781 # comments on what else is needed.
782 # + Fixed the ornaments that made "|h" completely unusable.
783 # They are not used in print_help if they will hurt. Strip pod
784 # if we're paging to less.
785 # + Fixed mis-formatting of help messages caused by ornaments
786 # to restore Larry's original formatting.
787 # + Fixed many other formatting errors. The code is still suboptimal,
788 # and needs a lot of work at restructuring. It's also misindented
790 # + Fixed bug where trying to look at an option like your pager
792 # + Fixed some $? processing. Note: if you use csh or tcsh, you will
793 # lose. You should consider shell escapes not using their shell,
794 # or else not caring about detailed status. This should really be
795 # unified into one place, too.
796 # + Fixed bug where invisible trailing whitespace on commands hoses you,
797 # tricking Perl into thinking you weren't calling a debugger command!
798 # + Fixed bug where leading whitespace on commands hoses you. (One
799 # suggests a leading semicolon or any other irrelevant non-whitespace
800 # to indicate literal Perl code.)
801 # + Fixed bugs that ate warnings due to wrong selected handle.
802 # + Fixed a precedence bug on signal stuff.
803 # + Fixed some unseemly wording.
804 # + Fixed bug in help command trying to call perl method code.
805 # + Fixed to call dumpvar from exception handler. SIGPIPE killed us.
807 # + Added some comments. This code is still nasty spaghetti.
808 # + Added message if you clear your pre/post command stacks which was
809 # very easy to do if you just typed a bare >, <, or {. (A command
810 # without an argument should *never* be a destructive action; this
811 # API is fundamentally screwed up; likewise option setting, which
812 # is equally buggered.)
813 # + Added command stack dump on argument of "?" for >, <, or {.
814 # + Added a semi-built-in doc viewer command that calls man with the
815 # proper %Config::Config path (and thus gets caching, man -k, etc),
816 # or else perldoc on obstreperous platforms.
817 # + Added to and rearranged the help information.
818 # + Detected apparent misuse of { ... } to declare a block; this used
819 # to work but now is a command, and mysteriously gave no complaint.
821 # Changes: 1.08: Apr 25, 2001 Jon Eveland <jweveland@yahoo.com>
823 # + This patch to perl5db.pl cleans up formatting issues on the help
824 # summary (h h) screen in the debugger. Mostly columnar alignment
825 # issues, plus converted the printed text to use all spaces, since
826 # tabs don't seem to help much here.
828 # Changes: 1.09: May 19, 2001 Ilya Zakharevich <ilya@math.ohio-state.edu>
829 # Minor bugs corrected;
830 # + Support for auto-creation of new TTY window on startup, either
831 # unconditionally, or if started as a kid of another debugger session;
832 # + New 'O'ption CreateTTY
833 # I<CreateTTY> bits control attempts to create a new TTY on events:
835 # 2: debugger is started inside debugger
837 # + Code to auto-create a new TTY window on OS/2 (currently one
838 # extra window per session - need named pipes to have more...);
839 # + Simplified interface for custom createTTY functions (with a backward
840 # compatibility hack); now returns the TTY name to use; return of ''
841 # means that the function reset the I/O handles itself;
842 # + Better message on the semantic of custom createTTY function;
843 # + Convert the existing code to create a TTY into a custom createTTY
845 # + Consistent support for TTY names of the form "TTYin,TTYout";
846 # + Switch line-tracing output too to the created TTY window;
847 # + make 'b fork' DWIM with CORE::GLOBAL::fork;
848 # + High-level debugger API cmd_*():
849 # cmd_b_load($filenamepart) # b load filenamepart
850 # cmd_b_line($lineno [, $cond]) # b lineno [cond]
851 # cmd_b_sub($sub [, $cond]) # b sub [cond]
852 # cmd_stop() # Control-C
853 # cmd_d($lineno) # d lineno (B)
854 # The cmd_*() API returns FALSE on failure; in this case it outputs
855 # the error message to the debugging output.
856 # + Low-level debugger API
857 # break_on_load($filename) # b load filename
858 # @files = report_break_on_load() # List files with load-breakpoints
859 # breakable_line_in_filename($name, $from [, $to])
860 # # First breakable line in the
861 # # range $from .. $to. $to defaults
862 # # to $from, and may be less than
864 # breakable_line($from [, $to]) # Same for the current file
865 # break_on_filename_line($name, $lineno [, $cond])
866 # # Set breakpoint,$cond defaults to
868 # break_on_filename_line_range($name, $from, $to [, $cond])
869 # # As above, on the first
870 # # breakable line in range
871 # break_on_line($lineno [, $cond]) # As above, in the current file
872 # break_subroutine($sub [, $cond]) # break on the first breakable line
873 # ($name, $from, $to) = subroutine_filename_lines($sub)
874 # # The range of lines of the text
875 # The low-level API returns TRUE on success, and die()s on failure.
877 # Changes: 1.10: May 23, 2001 Daniel Lewart <d-lewart@uiuc.edu>
879 # + Fixed warnings generated by "perl -dWe 42"
880 # + Corrected spelling errors
881 # + Squeezed Help (h) output into 80 columns
883 # Changes: 1.11: May 24, 2001 David Dyck <dcd@tc.fluke.com>
884 # + Made "x @INC" work like it used to
886 # Changes: 1.12: May 24, 2001 Daniel Lewart <d-lewart@uiuc.edu>
887 # + Fixed warnings generated by "O" (Show debugger options)
888 # + Fixed warnings generated by "p 42" (Print expression)
889 # Changes: 1.13: Jun 19, 2001 Scott.L.Miller@compaq.com
890 # + Added windowSize option
891 # Changes: 1.14: Oct 9, 2001 multiple
892 # + Clean up after itself on VMS (Charles Lane in 12385)
893 # + Adding "@ file" syntax (Peter Scott in 12014)
894 # + Debug reloading selfloaded stuff (Ilya Zakharevich in 11457)
895 # + $^S and other debugger fixes (Ilya Zakharevich in 11120)
896 # + Forgot a my() declaration (Ilya Zakharevich in 11085)
897 # Changes: 1.15: Nov 6, 2001 Michael G Schwern <schwern@pobox.com>
898 # + Updated 1.14 change log
899 # + Added *dbline explanatory comments
900 # + Mentioning perldebguts man page
901 # Changes: 1.16: Feb 15, 2002 Mark-Jason Dominus <mjd@plover.com>
902 # + $onetimeDump improvements
903 # Changes: 1.17: Feb 20, 2002 Richard Foley <richard.foley@rfi.net>
904 # Moved some code to cmd_[.]()'s for clarity and ease of handling,
905 # rationalised the following commands and added cmd_wrapper() to
906 # enable switching between old and frighteningly consistent new
907 # behaviours for diehards: 'o CommandSet=pre580' (sigh...)
908 # a(add), A(del) # action expr (added del by line)
909 # + b(add), B(del) # break [line] (was b,D)
910 # + w(add), W(del) # watch expr (was W,W)
911 # # added del by expr
912 # + h(summary), h h(long) # help (hh) (was h h,h)
913 # + m(methods), M(modules) # ... (was m,v)
914 # + o(option) # lc (was O)
915 # + v(view code), V(view Variables) # ... (was w,V)
916 # Changes: 1.18: Mar 17, 2002 Richard Foley <richard.foley@rfi.net>
917 # + fixed missing cmd_O bug
918 # Changes: 1.19: Mar 29, 2002 Spider Boardman
919 # + Added missing local()s -- DB::DB is called recursively.
920 # Changes: 1.20: Feb 17, 2003 Richard Foley <richard.foley@rfi.net>
921 # + pre'n'post commands no longer trashed with no args
922 # + watch val joined out of eval()
923 # Changes: 1.21: Jun 04, 2003 Joe McMahon <mcmahon@ibiblio.org>
924 # + Added comments and reformatted source. No bug fixes/enhancements.
925 # + Includes cleanup by Robin Barker and Jarkko Hietaniemi.
926 # Changes: 1.22 Jun 09, 2003 Alex Vandiver <alexmv@MIT.EDU>
927 # + Flush stdout/stderr before the debugger prompt is printed.
928 # Changes: 1.23: Dec 21, 2003 Dominique Quatravaux
929 # + Fix a side-effect of bug #24674 in the perl debugger ("odd taint bug")
930 # Changes: 1.24: Mar 03, 2004 Richard Foley <richard.foley@rfi.net>
931 # + Added command to save all debugger commands for sourcing later.
932 # + Added command to display parent inheritance tree of given class.
933 # + Fixed minor newline in history bug.
934 # Changes: 1.25: Apr 17, 2004 Richard Foley <richard.foley@rfi.net>
935 # + Fixed option bug (setting invalid options + not recognising valid short forms)
936 # Changes: 1.26: Apr 22, 2004 Richard Foley <richard.foley@rfi.net>
937 # + unfork the 5.8.x and 5.9.x debuggers.
938 # + whitespace and assertions call cleanup across versions
939 # + H * deletes (resets) history
940 # + i now handles Class + blessed objects
941 # Changes: 1.27: May 09, 2004 Richard Foley <richard.foley@rfi.net>
942 # + updated pod page references - clunky.
943 # + removed windowid restriction for forking into an xterm.
944 # + more whitespace again.
945 # + wrapped restart and enabled rerun [-n] (go back n steps) command.
946 # Changes: 1.28: Oct 12, 2004 Richard Foley <richard.foley@rfi.net>
947 # + Added threads support (inc. e and E commands)
948 # Changes: 1.29: Nov 28, 2006 Bo Lindbergh <blgl@hagernas.com>
949 # + Added macosx_get_fork_TTY support
950 # Changes: 1.30: Mar 06, 2007 Andreas Koenig <andk@cpan.org>
951 # + Added HistFile, HistSize
953 # + Remove support for assertions and -A
954 # + stop NEXT::AUTOLOAD from emitting warnings under the debugger. RT #25053
955 # + "update for Mac OS X 10.5" [finding the tty device]
956 # + "What I needed to get the forked debugger to work" [on VMS]
957 # + [perl #57016] debugger: o warn=0 die=0 ignored
958 # + Note, but don't use, PERLDBf_SAVESRC
959 # + Fix #7013: lvalue subs not working inside debugger
960 # Changes: 1.32: Jun 03, 2009 Jonathan Leto <jonathan@leto.net>
961 # + Fix bug where a key _< with undefined value was put into the symbol table
962 # + when the $filename variable is not set
964 # + Debugger prints lines to the remote port when it forks and openes a new port (f633fd2)
965 # + The debugger now continues to use RemotePort when it's been configured to use it. (11653f7)
966 # + Stop using $ENV{LESS} for parameters not intended for less (d463cf2)
967 # + Configure has a path to less and perl5db.pl can use it (bf320d6)
968 # + Die with $@ instead of empty message (86755f4)
969 # + Remove extra/useless $@ check after eval { require PadWalker } (which is still checked) (dab8d6d)
970 # + Promote eval( "require ..." ) to eval { require ... } (4a49187)
971 # + Promote eval { require( ... )} || die to mere require( ... ) (999f23b)
972 # + Remove indirect object notation from debugger (bee4b46)
973 # + Document that @{$main::{'_<'.$filename}} lines are dualvar to (COP*). (7e17a74)
974 # + Remove MacOS classic support from the debugger. (2b894b7)
975 ########################################################################
977 =head1 DEBUGGER INITIALIZATION
979 The debugger starts up in phases.
983 First, it initializes the environment it wants to run in: turning off
984 warnings during its own compilation, defining variables which it will need
985 to avoid warnings later, setting itself up to not exit when the program
986 terminates, and defaulting to printing return values for the C<r> command.
990 # Needed for the statement after exec():
992 # This BEGIN block is simply used to switch off warnings during debugger
993 # compilation. Probably it would be better practice to fix the warnings,
994 # but this is how it's done at the moment.
999 } # Switch compilation warnings off until another BEGIN.
1001 local ($^W) = 0; # Switch run-time warnings off during init.
1003 =head2 THREADS SUPPORT
1005 If we are running under a threaded Perl, we require threads and threads::shared
1006 if the environment variable C<PERL5DB_THREADED> is set, to enable proper
1007 threaded debugger control. C<-dt> can also be used to set this.
1009 Each new thread will be announced and the debugger prompt will always inform
1010 you of each new thread created. It will also indicate the thread id in which
1011 we are currently running within the prompt like this:
1015 Where C<[tid]> is an integer thread id and C<$i> is the familiar debugger
1016 command prompt. The prompt will show: C<[0]> when running under threads, but
1017 not actually in a thread. C<[tid]> is consistent with C<gdb> usage.
1019 While running under threads, when you set or delete a breakpoint (etc.), this
1020 will apply to all threads, not just the currently running one. When you are
1021 in a currently executing thread, you will stay there until it completes. With
1022 the current implementation it is not currently possible to hop from one thread
1025 The C<e> and C<E> commands are currently fairly minimal - see C<h e> and C<h E>.
1027 Note that threading support was built into the debugger as of Perl version
1028 C<5.8.6> and debugger version C<1.2.8>.
1033 # ensure we can share our non-threaded variables or no-op
1034 if ($ENV{PERL5DB_THREADED}) {
1036 require threads::shared;
1037 import threads::shared qw(share);
1041 print "Threads support enabled\n";
1048 # This would probably be better done with "use vars", but that wasn't around
1049 # when this code was originally written. (Neither was "use strict".) And on
1050 # the principle of not fiddling with something that was working, this was
1053 # These variables control the execution of 'dumpvar.pl'.
1054 $dumpvar::hashDepth,
1055 $dumpvar::arrayDepth,
1056 $dumpvar::dumpDBFiles,
1057 $dumpvar::dumpPackages,
1058 $dumpvar::quoteHighBit,
1059 $dumpvar::printUndef,
1060 $dumpvar::globPrint,
1061 $dumpvar::usageOnly,
1063 # used to save @ARGV and extract any debugger-related flags.
1066 # used to control die() reporting in diesignal()
1069 # used to prevent multiple entries to diesignal()
1070 # (if for instance diesignal() itself dies)
1073 # used to prevent the debugger from running nonstop
1079 # without threads, $filename is not defined until DB::DB is called
1080 foreach my $k (keys (%INC)) {
1081 &share(\$main::{'_<'.$filename}) if defined $filename;
1084 # Command-line + PERLLIB:
1085 # Save the contents of @INC before they are modified elsewhere.
1088 # This was an attempt to clear out the previous values of various
1089 # trapped errors. Apparently it didn't help. XXX More info needed!
1090 # $prevwarn = $prevdie = $prevbus = $prevsegv = ''; # Does not help?!
1092 # We set these variables to safe values. We don't want to blindly turn
1093 # off warnings, because other packages may still want them.
1094 $trace = $signal = $single = 0; # Uninitialized warning suppression
1095 # (local $^W cannot help - other packages!).
1097 # Default to not exiting when program finishes; print the return
1098 # value when the 'r' command is used to return from a subroutine.
1099 $inhibit_exit = $option{PrintRet} = 1;
1101 =head1 OPTION PROCESSING
1103 The debugger's options are actually spread out over the debugger itself and
1104 C<dumpvar.pl>; some of these are variables to be set, while others are
1105 subs to be called with a value. To try to make this a little easier to
1106 manage, the debugger uses a few data structures to define what options
1107 are legal and how they are to be processed.
1109 First, the C<@options> array defines the I<names> of all the options that
1115 CommandSet HistFile HistSize
1116 hashDepth arrayDepth dumpDepth
1117 DumpDBFiles DumpPackages DumpReused
1118 compactDump veryCompact quote
1119 HighBit undefPrint globPrint
1120 PrintRet UsageOnly frame
1122 ReadLine NonStop LineInfo
1123 maxTraceLen recallCommand ShellBang
1124 pager tkRunning ornaments
1125 signalLevel warnLevel dieLevel
1126 inhibit_exit ImmediateStop bareStringify
1127 CreateTTY RemotePort windowSize
1131 @RememberOnROptions = qw(DollarCaretP);
1135 Second, C<optionVars> lists the variables that each option uses to save its
1141 hashDepth => \$dumpvar::hashDepth,
1142 arrayDepth => \$dumpvar::arrayDepth,
1143 CommandSet => \$CommandSet,
1144 DumpDBFiles => \$dumpvar::dumpDBFiles,
1145 DumpPackages => \$dumpvar::dumpPackages,
1146 DumpReused => \$dumpvar::dumpReused,
1147 HighBit => \$dumpvar::quoteHighBit,
1148 undefPrint => \$dumpvar::printUndef,
1149 globPrint => \$dumpvar::globPrint,
1150 UsageOnly => \$dumpvar::usageOnly,
1151 CreateTTY => \$CreateTTY,
1152 bareStringify => \$dumpvar::bareStringify,
1154 AutoTrace => \$trace,
1155 inhibit_exit => \$inhibit_exit,
1156 maxTraceLen => \$maxtrace,
1157 ImmediateStop => \$ImmediateStop,
1158 RemotePort => \$remoteport,
1159 windowSize => \$window,
1160 HistFile => \$histfile,
1161 HistSize => \$histsize,
1166 Third, C<%optionAction> defines the subroutine to be called to process each
1172 compactDump => \&dumpvar::compactDump,
1173 veryCompact => \&dumpvar::veryCompact,
1174 quote => \&dumpvar::quote,
1177 ReadLine => \&ReadLine,
1178 NonStop => \&NonStop,
1179 LineInfo => \&LineInfo,
1180 recallCommand => \&recallCommand,
1181 ShellBang => \&shellBang,
1183 signalLevel => \&signalLevel,
1184 warnLevel => \&warnLevel,
1185 dieLevel => \&dieLevel,
1186 tkRunning => \&tkRunning,
1187 ornaments => \&ornaments,
1188 RemotePort => \&RemotePort,
1189 DollarCaretP => \&DollarCaretP,
1194 Last, the C<%optionRequire> notes modules that must be C<require>d if an
1199 # Note that this list is not complete: several options not listed here
1200 # actually require that dumpvar.pl be loaded for them to work, but are
1201 # not in the table. A subsequent patch will correct this problem; for
1202 # the moment, we're just recommenting, and we are NOT going to change
1205 compactDump => 'dumpvar.pl',
1206 veryCompact => 'dumpvar.pl',
1207 quote => 'dumpvar.pl',
1212 There are a number of initialization-related variables which can be set
1213 by putting code to set them in a BEGIN block in the C<PERL5DB> environment
1214 variable. These are:
1218 =item C<$rl> - readline control XXX needs more explanation
1220 =item C<$warnLevel> - whether or not debugger takes over warning handling
1222 =item C<$dieLevel> - whether or not debugger takes over die handling
1224 =item C<$signalLevel> - whether or not debugger takes over signal handling
1226 =item C<$pre> - preprompt actions (array reference)
1228 =item C<$post> - postprompt actions (array reference)
1232 =item C<$CreateTTY> - whether or not to create a new TTY for this debugger
1234 =item C<$CommandSet> - which command set to use (defaults to new, documented set)
1240 # These guys may be defined in $ENV{PERL5DB} :
1241 $rl = 1 unless defined $rl;
1242 $warnLevel = 1 unless defined $warnLevel;
1243 $dieLevel = 1 unless defined $dieLevel;
1244 $signalLevel = 1 unless defined $signalLevel;
1245 $pre = [] unless defined $pre;
1246 $post = [] unless defined $post;
1247 $pretype = [] unless defined $pretype;
1248 $CreateTTY = 3 unless defined $CreateTTY;
1249 $CommandSet = '580' unless defined $CommandSet;
1254 share($signalLevel);
1264 The default C<die>, C<warn>, and C<signal> handlers are set up.
1268 warnLevel($warnLevel);
1269 dieLevel($dieLevel);
1270 signalLevel($signalLevel);
1274 The pager to be used is needed next. We try to get it from the
1275 environment first. If it's not defined there, we try to find it in
1276 the Perl C<Config.pm>. If it's not there, we default to C<more>. We
1277 then call the C<pager()> function to save the pager name.
1281 # This routine makes sure $pager is set up so that '|' can use it.
1284 # If PAGER is defined in the environment, use it.
1288 # If not, see if Config.pm defines it.
1289 : eval { require Config }
1290 && defined $Config::Config{pager}
1291 ? $Config::Config{pager}
1293 # If not, fall back to 'more'.
1296 unless defined $pager;
1300 We set up the command to be used to access the man pages, the command
1301 recall character (C<!> unless otherwise defined) and the shell escape
1302 character (C<!> unless otherwise defined). Yes, these do conflict, and
1303 neither works in the debugger at the moment.
1309 # Set up defaults for command recall and shell escape (note:
1310 # these currently don't work in linemode debugging).
1311 &recallCommand("!") unless defined $prc;
1312 &shellBang("!") unless defined $psh;
1316 We then set up the gigantic string containing the debugger help.
1317 We also set the limit on the number of arguments we'll display during a
1324 # If we didn't get a default for the length of eval/stack trace args,
1326 $maxtrace = 400 unless defined $maxtrace;
1328 =head2 SETTING UP THE DEBUGGER GREETING
1330 The debugger I<greeting> helps to inform the user how many debuggers are
1331 running, and whether the current debugger is the primary or a child.
1333 If we are the primary, we just hang onto our pid so we'll have it when
1334 or if we start a child debugger. If we are a child, we'll set things up
1335 so we'll have a unique greeting and so the parent will give us our own
1338 We save the current contents of the C<PERLDB_PIDS> environment variable
1339 because we mess around with it. We'll also need to hang onto it because
1340 we'll need it if we restart.
1342 Child debuggers make a label out of the current PID structure recorded in
1343 PERLDB_PIDS plus the new PID. They also mark themselves as not having a TTY
1344 yet so the parent will give them one later via C<resetterm()>.
1348 # Save the current contents of the environment; we're about to
1349 # much with it. We'll need this if we have to restart.
1350 $ini_pids = $ENV{PERLDB_PIDS};
1352 if ( defined $ENV{PERLDB_PIDS} ) {
1354 # We're a child. Make us a label out of the current PID structure
1355 # recorded in PERLDB_PIDS plus our (new) PID. Mark us as not having
1356 # a term yet so the parent will give us one later via resetterm().
1358 my $env_pids = $ENV{PERLDB_PIDS};
1359 $pids = "[$env_pids]";
1361 # Unless we are on OpenVMS, all programs under the DCL shell run under
1364 if (($^O eq 'VMS') && ($env_pids =~ /\b$$\b/)) {
1368 $ENV{PERLDB_PIDS} .= "->$$";
1372 } ## end if (defined $ENV{PERLDB_PIDS...
1375 # We're the parent PID. Initialize PERLDB_PID in case we end up with a
1376 # child debugger, and mark us as the parent, so we'll know to set up
1377 # more TTY's is we have to.
1378 $ENV{PERLDB_PIDS} = "$$";
1385 # Sets up $emacs as a synonym for $slave_editor.
1386 *emacs = $slave_editor if $slave_editor; # May be used in afterinit()...
1388 =head2 READING THE RC FILE
1390 The debugger will read a file of initialization options if supplied. If
1391 running interactively, this is C<.perldb>; if not, it's C<perldb.ini>.
1395 # As noted, this test really doesn't check accurately that the debugger
1396 # is running at a terminal or not.
1398 my $dev_tty = '/dev/tty';
1399 $dev_tty = 'TT:' if ($^O eq 'VMS');
1400 if ( -e $dev_tty ) { # this is the wrong metric!
1401 $rcfile = ".perldb";
1404 $rcfile = "perldb.ini";
1409 The debugger does a safety test of the file to be read. It must be owned
1410 either by the current user or root, and must only be writable by the owner.
1414 # This wraps a safety test around "do" to read and evaluate the init file.
1416 # This isn't really safe, because there's a race
1417 # between checking and opening. The solution is to
1418 # open and fstat the handle, but then you have to read and
1419 # eval the contents. But then the silly thing gets
1420 # your lexical scope, which is unfortunate at best.
1424 # Just exactly what part of the word "CORE::" don't you understand?
1425 local $SIG{__WARN__};
1426 local $SIG{__DIE__};
1428 unless ( is_safe_file($file) ) {
1429 CORE::warn <<EO_GRIPE;
1430 perldb: Must not source insecure rcfile $file.
1431 You or the superuser must be the owner, and it must not
1432 be writable by anyone but its owner.
1435 } ## end unless (is_safe_file($file...
1438 CORE::warn("perldb: couldn't parse $file: $@") if $@;
1439 } ## end sub safe_do
1441 # This is the safety test itself.
1443 # Verifies that owner is either real user or superuser and that no
1444 # one but owner may write to it. This function is of limited use
1445 # when called on a path instead of upon a handle, because there are
1446 # no guarantees that filename (by dirent) whose file (by ino) is
1447 # eventually accessed is the same as the one tested.
1448 # Assumes that the file's existence is not in doubt.
1451 stat($path) || return; # mysteriously vaporized
1452 my ( $dev, $ino, $mode, $nlink, $uid, $gid ) = stat(_);
1454 return 0 if $uid != 0 && $uid != $<;
1455 return 0 if $mode & 022;
1457 } ## end sub is_safe_file
1459 # If the rcfile (whichever one we decided was the right one to read)
1460 # exists, we safely do it.
1462 safe_do("./$rcfile");
1465 # If there isn't one here, try the user's home directory.
1466 elsif ( defined $ENV{HOME} && -f "$ENV{HOME}/$rcfile" ) {
1467 safe_do("$ENV{HOME}/$rcfile");
1470 # Else try the login directory.
1471 elsif ( defined $ENV{LOGDIR} && -f "$ENV{LOGDIR}/$rcfile" ) {
1472 safe_do("$ENV{LOGDIR}/$rcfile");
1475 # If the PERLDB_OPTS variable has options in it, parse those out next.
1476 if ( defined $ENV{PERLDB_OPTS} ) {
1477 parse_options( $ENV{PERLDB_OPTS} );
1482 The last thing we do during initialization is determine which subroutine is
1483 to be used to obtain a new terminal when a new debugger is started. Right now,
1484 the debugger only handles TCP sockets, X11, OS/2, amd Mac OS X
1489 # Set up the get_fork_TTY subroutine to be aliased to the proper routine.
1490 # Works if you're running an xterm or xterm-like window, or you're on
1491 # OS/2, or on Mac OS X. This may need some expansion.
1493 if (not defined &get_fork_TTY) # only if no routine exists
1495 if ( defined $remoteport ) {
1496 # Expect an inetd-like server
1497 *get_fork_TTY = \&socket_get_fork_TTY; # to listen to us
1499 elsif (defined $ENV{TERM} # If we know what kind
1500 # of terminal this is,
1501 and $ENV{TERM} eq 'xterm' # and it's an xterm,
1502 and defined $ENV{DISPLAY} # and what display it's on,
1505 *get_fork_TTY = \&xterm_get_fork_TTY; # use the xterm version
1507 elsif ( $^O eq 'os2' ) { # If this is OS/2,
1508 *get_fork_TTY = \&os2_get_fork_TTY; # use the OS/2 version
1510 elsif ( $^O eq 'darwin' # If this is Mac OS X
1511 and defined $ENV{TERM_PROGRAM} # and we're running inside
1512 and $ENV{TERM_PROGRAM}
1513 eq 'Apple_Terminal' # Terminal.app
1516 *get_fork_TTY = \&macosx_get_fork_TTY; # use the Mac OS X version
1518 } ## end if (not defined &get_fork_TTY...
1520 # untaint $^O, which may have been tainted by the last statement.
1521 # see bug [perl #24674]
1525 # Here begin the unreadable code. It needs fixing.
1527 =head2 RESTART PROCESSING
1529 This section handles the restart command. When the C<R> command is invoked, it
1530 tries to capture all of the state it can into environment variables, and
1531 then sets C<PERLDB_RESTART>. When we start executing again, we check to see
1532 if C<PERLDB_RESTART> is there; if so, we reload all the information that
1533 the R command stuffed into the environment variables.
1535 PERLDB_RESTART - flag only, contains no restart data itself.
1536 PERLDB_HIST - command history, if it's available
1537 PERLDB_ON_LOAD - breakpoints set by the rc file
1538 PERLDB_POSTPONE - subs that have been loaded/not executed, and have actions
1539 PERLDB_VISITED - files that had breakpoints
1540 PERLDB_FILE_... - breakpoints for a file
1541 PERLDB_OPT - active options
1542 PERLDB_INC - the original @INC
1543 PERLDB_PRETYPE - preprompt debugger actions
1544 PERLDB_PRE - preprompt Perl code
1545 PERLDB_POST - post-prompt Perl code
1546 PERLDB_TYPEAHEAD - typeahead captured by readline()
1548 We chug through all these variables and plug the values saved in them
1549 back into the appropriate spots in the debugger.
1553 if ( exists $ENV{PERLDB_RESTART} ) {
1555 # We're restarting, so we don't need the flag that says to restart anymore.
1556 delete $ENV{PERLDB_RESTART};
1559 @hist = get_list('PERLDB_HIST');
1560 %break_on_load = get_list("PERLDB_ON_LOAD");
1561 %postponed = get_list("PERLDB_POSTPONE");
1565 share(%break_on_load);
1568 # restore breakpoints/actions
1569 my @had_breakpoints = get_list("PERLDB_VISITED");
1570 for ( 0 .. $#had_breakpoints ) {
1571 my %pf = get_list("PERLDB_FILE_$_");
1572 $postponed_file{ $had_breakpoints[$_] } = \%pf if %pf;
1576 my %opt = get_list("PERLDB_OPT");
1578 while ( ( $opt, $val ) = each %opt ) {
1579 $val =~ s/[\\\']/\\$1/g;
1580 parse_options("$opt'$val'");
1583 # restore original @INC
1584 @INC = get_list("PERLDB_INC");
1587 # return pre/postprompt actions and typeahead buffer
1588 $pretype = [ get_list("PERLDB_PRETYPE") ];
1589 $pre = [ get_list("PERLDB_PRE") ];
1590 $post = [ get_list("PERLDB_POST") ];
1591 @typeahead = get_list( "PERLDB_TYPEAHEAD", @typeahead );
1592 } ## end if (exists $ENV{PERLDB_RESTART...
1594 =head2 SETTING UP THE TERMINAL
1596 Now, we'll decide how the debugger is going to interact with the user.
1597 If there's no TTY, we set the debugger to run non-stop; there's not going
1598 to be anyone there to enter commands.
1609 If there is a TTY, we have to determine who it belongs to before we can
1610 proceed. If this is a slave editor or graphical debugger (denoted by
1611 the first command-line switch being '-emacs'), we shift this off and
1612 set C<$rl> to 0 (XXX ostensibly to do straight reads).
1618 # Is Perl being run from a slave editor or graphical debugger?
1619 # If so, don't use readline, and set $slave_editor = 1.
1621 ( ( defined $main::ARGV[0] ) and ( $main::ARGV[0] eq '-emacs' ) );
1622 $rl = 0, shift(@main::ARGV) if $slave_editor;
1624 #require Term::ReadLine;
1628 We then determine what the console should be on various systems:
1632 =item * Cygwin - We use C<stdin> instead of a separate device.
1636 if ( $^O eq 'cygwin' ) {
1638 # /dev/tty is binary. use stdin for textmode
1642 =item * Unix - use C</dev/tty>.
1646 elsif ( -e "/dev/tty" ) {
1647 $console = "/dev/tty";
1650 =item * Windows or MSDOS - use C<con>.
1654 elsif ( $^O eq 'dos' or -e "con" or $^O eq 'MSWin32' ) {
1658 =item * VMS - use C<sys$command>.
1664 # everything else is ...
1665 $console = "sys\$command";
1672 Several other systems don't use a specific console. We C<undef $console>
1673 for those (Windows using a slave editor/graphical debugger, NetWare, OS/2
1674 with a slave editor, Epoc).
1678 if ( ( $^O eq 'MSWin32' ) and ( $slave_editor or defined $ENV{EMACS} ) ) {
1680 # /dev/tty is binary. use stdin for textmode
1684 if ( $^O eq 'NetWare' ) {
1686 # /dev/tty is binary. use stdin for textmode
1690 # In OS/2, we need to use STDIN to get textmode too, even though
1691 # it pretty much looks like Unix otherwise.
1692 if ( defined $ENV{OS2_SHELL} and ( $slave_editor or $ENV{WINDOWID} ) )
1697 # EPOC also falls into the 'got to use STDIN' camp.
1698 if ( $^O eq 'epoc' ) {
1704 If there is a TTY hanging around from a parent, we use that as the console.
1708 $console = $tty if defined $tty;
1710 =head2 SOCKET HANDLING
1712 The debugger is capable of opening a socket and carrying out a debugging
1713 session over the socket.
1715 If C<RemotePort> was defined in the options, the debugger assumes that it
1716 should try to start a debugging session on that port. It builds the socket
1717 and then tries to connect the input and output filehandles to it.
1721 # Handle socket stuff.
1723 if ( defined $remoteport ) {
1725 # If RemotePort was defined in the options, connect input and output
1727 $IN = $OUT = connect_remoteport();
1728 } ## end if (defined $remoteport)
1732 If no C<RemotePort> was defined, and we want to create a TTY on startup,
1733 this is probably a situation where multiple debuggers are running (for example,
1734 a backticked command that starts up another debugger). We create a new IN and
1735 OUT filehandle, and do the necessary mojo to create a new TTY if we know how
1743 # Two debuggers running (probably a system or a backtick that invokes
1744 # the debugger itself under the running one). create a new IN and OUT
1745 # filehandle, and do the necessary mojo to create a new tty if we
1746 # know how, and we can.
1747 create_IN_OUT(4) if $CreateTTY & 4;
1750 # If we have a console, check to see if there are separate ins and
1751 # outs to open. (They are assumed identical if not.)
1753 my ( $i, $o ) = split /,/, $console;
1754 $o = $i unless defined $o;
1756 # read/write on in, or just read, or read on STDIN.
1758 || open( IN, "<$i" )
1759 || open( IN, "<&STDIN" );
1761 # read/write/create/clobber out, or write/create/clobber out,
1762 # or merge with STDERR, or merge with STDOUT.
1764 || open( OUT, ">$o" )
1765 || open( OUT, ">&STDERR" )
1766 || open( OUT, ">&STDOUT" ); # so we don't dongle stdout
1768 } ## end if ($console)
1769 elsif ( not defined $console ) {
1771 # No console. Open STDIN.
1772 open( IN, "<&STDIN" );
1774 # merge with STDERR, or with STDOUT.
1775 open( OUT, ">&STDERR" )
1776 || open( OUT, ">&STDOUT" ); # so we don't dongle stdout
1777 $console = 'STDIN/OUT';
1778 } ## end elsif (not defined $console)
1780 # Keep copies of the filehandles so that when the pager runs, it
1781 # can close standard input without clobbering ours.
1782 $IN = \*IN, $OUT = \*OUT if $console or not defined $console;
1783 } ## end elsif (from if(defined $remoteport))
1785 # Unbuffer DB::OUT. We need to see responses right away.
1786 my $previous = select($OUT);
1787 $| = 1; # for DB::OUT
1790 # Line info goes to debugger output unless pointed elsewhere.
1791 # Pointing elsewhere makes it possible for slave editors to
1792 # keep track of file and position. We have both a filehandle
1793 # and a I/O description to keep track of.
1794 $LINEINFO = $OUT unless defined $LINEINFO;
1795 $lineinfo = $console unless defined $lineinfo;
1796 # share($LINEINFO); # <- unable to share globs
1801 To finish initialization, we show the debugger greeting,
1802 and then call the C<afterinit()> subroutine if there is one.
1806 # Show the debugger greeting.
1807 $header =~ s/.Header: ([^,]+),v(\s+\S+\s+\S+).*$/$1$2/;
1808 unless ($runnonstop) {
1811 if ( $term_pid eq '-1' ) {
1812 print $OUT "\nDaughter DB session started...\n";
1815 print $OUT "\nLoading DB routines from $header\n";
1818 $slave_editor ? "enabled" : "available", ".\n"
1821 "\nEnter h or 'h h' for help, or '$doccmd perldebug' for more help.\n\n";
1822 } ## end else [ if ($term_pid eq '-1')
1823 } ## end unless ($runnonstop)
1824 } ## end else [ if ($notty)
1826 # XXX This looks like a bug to me.
1827 # Why copy to @ARGS and then futz with @args?
1830 # Make sure backslashes before single quotes are stripped out, and
1831 # keep args unless they are numeric (XXX why?)
1832 # s/\'/\\\'/g; # removed while not justified understandably
1833 # s/(.*)/'$1'/ unless /^-?[\d.]+$/; # ditto
1836 # If there was an afterinit() sub defined, call it. It will get
1837 # executed in our scope, so it can fiddle with debugger globals.
1838 if ( defined &afterinit ) { # May be defined in $rcfile
1842 # Inform us about "Stack dump during die enabled ..." in dieLevel().
1845 ############################################################ Subroutines
1851 This gigantic subroutine is the heart of the debugger. Called before every
1852 statement, its job is to determine if a breakpoint has been reached, and
1853 stop if so; read commands from the user, parse them, and execute
1854 them, and then send execution off to the next statement.
1856 Note that the order in which the commands are processed is very important;
1857 some commands earlier in the loop will actually alter the C<$cmd> variable
1858 to create other commands to be executed later. This is all highly I<optimized>
1859 but can be confusing. Check the comments for each C<$cmd ... && do {}> to
1860 see what's happening in any given command.
1866 # lock the debugger and get the thread id for the prompt
1869 if ($ENV{PERL5DB_THREADED}) {
1870 $tid = eval { "[".threads->tid."]" };
1873 # Check for whether we should be running continuously or not.
1874 # _After_ the perl program is compiled, $single is set to 1:
1875 if ( $single and not $second_time++ ) {
1877 # Options say run non-stop. Run until we get an interrupt.
1878 if ($runnonstop) { # Disable until signal
1879 # If there's any call stack in place, turn off single
1880 # stepping into subs throughout the stack.
1881 for ( $i = 0 ; $i <= $stack_depth ; ) {
1882 $stack[ $i++ ] &= ~1;
1885 # And we are now no longer in single-step mode.
1888 # If we simply returned at this point, we wouldn't get
1889 # the trace info. Fall on through.
1891 } ## end if ($runnonstop)
1893 elsif ($ImmediateStop) {
1895 # We are supposed to stop here; XXX probably a break.
1896 $ImmediateStop = 0; # We've processed it; turn it off
1897 $signal = 1; # Simulate an interrupt to force
1898 # us into the command loop
1900 } ## end if ($single and not $second_time...
1902 # If we're in single-step mode, or an interrupt (real or fake)
1903 # has occurred, turn off non-stop mode.
1904 $runnonstop = 0 if $single or $signal;
1906 # Preserve current values of $@, $!, $^E, $,, $/, $\, $^W.
1907 # The code being debugged may have altered them.
1910 # Since DB::DB gets called after every line, we can use caller() to
1911 # figure out where we last were executing. Sneaky, eh? This works because
1912 # caller is returning all the extra information when called from the
1914 local ( $package, $filename, $line ) = caller;
1915 local $filename_ini = $filename;
1917 # set up the context for DB::eval, so it can properly execute
1918 # code on behalf of the user. We add the package in so that the
1919 # code is eval'ed in the proper package (not in the debugger!).
1920 local $usercontext =
1921 '($@, $!, $^E, $,, $/, $\, $^W) = @saved;' . "package $package;";
1923 # Create an alias to the active file magical array to simplify
1925 local (*dbline) = $main::{ '_<' . $filename };
1927 # Last line in the program.
1928 local $max = $#dbline;
1930 # if we have something here, see if we should break.
1932 && _is_breakpoint_enabled($filename, $line)
1933 && ( ( $stop, $action ) = split( /\0/, $dbline{$line} ) ) )
1936 # Stop if the stop criterion says to just stop.
1937 if ( $stop eq '1' ) {
1941 # It's a conditional stop; eval it in the user's context and
1942 # see if we should stop. If so, remove the one-time sigil.
1944 $evalarg = "\$DB::signal |= 1 if do {$stop}";
1946 $dbline{$line} =~ s/;9($|\0)/$1/;
1948 } ## end if ($dbline{$line} && ...
1950 # Preserve the current stop-or-not, and see if any of the W
1951 # (watch expressions) has changed.
1952 my $was_signal = $signal;
1954 # If we have any watch expressions ...
1956 for ( my $n = 0 ; $n <= $#to_watch ; $n++ ) {
1957 $evalarg = $to_watch[$n];
1958 local $onetimeDump; # Tell DB::eval() to not output results
1960 # Fix context DB::eval() wants to return an array, but
1961 # we need a scalar here.
1962 my ($val) = join( "', '", &eval );
1963 $val = ( ( defined $val ) ? "'$val'" : 'undef' );
1966 if ( $val ne $old_watch[$n] ) {
1968 # Yep! Show the difference, and fake an interrupt.
1971 Watchpoint $n:\t$to_watch[$n] changed:
1972 old value:\t$old_watch[$n]
1975 $old_watch[$n] = $val;
1976 } ## end if ($val ne $old_watch...
1977 } ## end for (my $n = 0 ; $n <= ...
1978 } ## end if ($trace & 2)
1980 =head2 C<watchfunction()>
1982 C<watchfunction()> is a function that can be defined by the user; it is a
1983 function which will be run on each entry to C<DB::DB>; it gets the
1984 current package, filename, and line as its parameters.
1986 The watchfunction can do anything it likes; it is executing in the
1987 debugger's context, so it has access to all of the debugger's internal
1988 data structures and functions.
1990 C<watchfunction()> can control the debugger's actions. Any of the following
1991 will cause the debugger to return control to the user's program after
1992 C<watchfunction()> executes:
1998 Returning a false value from the C<watchfunction()> itself.
2002 Altering C<$single> to a false value.
2006 Altering C<$signal> to a false value.
2010 Turning off the C<4> bit in C<$trace> (this also disables the
2011 check for C<watchfunction()>. This can be done with
2019 # If there's a user-defined DB::watchfunction, call it with the
2020 # current package, filename, and line. The function executes in
2022 if ( $trace & 4 ) { # User-installed watch
2024 if watchfunction( $package, $filename, $line )
2027 and not( $trace & ~4 );
2028 } ## end if ($trace & 4)
2030 # Pick up any alteration to $signal in the watchfunction, and
2031 # turn off the signal now.
2032 $was_signal = $signal;
2035 =head2 GETTING READY TO EXECUTE COMMANDS
2037 The debugger decides to take control if single-step mode is on, the
2038 C<t> command was entered, or the user generated a signal. If the program
2039 has fallen off the end, we set things up so that entering further commands
2040 won't cause trouble, and we say that the program is over.
2044 # Check to see if we should grab control ($single true,
2045 # trace set appropriately, or we got a signal).
2046 if ( $single || ( $trace & 1 ) || $was_signal ) {
2048 # Yes, grab control.
2049 if ($slave_editor) {
2051 # Tell the editor to update its position.
2052 $position = "\032\032$filename:$line:0\n";
2053 print_lineinfo($position);
2058 Special check: if we're in package C<DB::fake>, we've gone through the
2059 C<END> block at least once. We set up everything so that we can continue
2060 to enter commands and have a valid context to be in.
2064 elsif ( $package eq 'DB::fake' ) {
2066 # Fallen off the end already.
2069 Debugged program terminated. Use B<q> to quit or B<R> to restart,
2070 use B<o> I<inhibit_exit> to avoid stopping after program termination,
2071 B<h q>, B<h R> or B<h o> to get additional info.
2074 # Set the DB::eval context appropriately.
2077 '($@, $!, $^E, $,, $/, $\, $^W) = @saved;'
2078 . "package $package;"; # this won't let them modify, alas
2079 } ## end elsif ($package eq 'DB::fake')
2083 If the program hasn't finished executing, we scan forward to the
2084 next executable line, print that out, build the prompt from the file and line
2085 number information, and print that.
2091 # Still somewhere in the midst of execution. Set up the
2093 $sub =~ s/\'/::/; # Swap Perl 4 package separators (') to
2094 # Perl 5 ones (sorry, we don't print Klingon
2097 $prefix = $sub =~ /::/ ? "" : "${'package'}::";
2098 $prefix .= "$sub($filename:";
2099 $after = ( $dbline[$line] =~ /\n$/ ? '' : "\n" );
2101 # Break up the prompt if it's really long.
2102 if ( length($prefix) > 30 ) {
2103 $position = "$prefix$line):\n$line:\t$dbline[$line]$after";
2109 $position = "$prefix$line$infix$dbline[$line]$after";
2112 # Print current line info, indenting if necessary.
2114 print_lineinfo( ' ' x $stack_depth,
2115 "$line:\t$dbline[$line]$after" );
2118 depth_print_lineinfo($position);
2121 # Scan forward, stopping at either the end or the next
2123 for ( $i = $line + 1 ; $i <= $max && $dbline[$i] == 0 ; ++$i )
2126 # Drop out on null statements, block closers, and comments.
2127 last if $dbline[$i] =~ /^\s*[\;\}\#\n]/;
2129 # Drop out if the user interrupted us.
2132 # Append a newline if the line doesn't have one. Can happen
2133 # in eval'ed text, for instance.
2134 $after = ( $dbline[$i] =~ /\n$/ ? '' : "\n" );
2136 # Next executable line.
2137 $incr_pos = "$prefix$i$infix$dbline[$i]$after";
2138 $position .= $incr_pos;
2141 # Print it indented if tracing is on.
2142 print_lineinfo( ' ' x $stack_depth,
2143 "$i:\t$dbline[$i]$after" );
2146 depth_print_lineinfo($incr_pos);
2148 } ## end for ($i = $line + 1 ; $i...
2149 } ## end else [ if ($slave_editor)
2150 } ## end if ($single || ($trace...
2154 If there's an action to be executed for the line we stopped at, execute it.
2155 If there are any preprompt actions, execute those as well.
2159 # If there's an action, do it now.
2160 $evalarg = $action, &eval if $action;
2162 # Are we nested another level (e.g., did we evaluate a function
2163 # that had a breakpoint in it at the debugger prompt)?
2164 if ( $single || $was_signal ) {
2166 # Yes, go down a level.
2167 local $level = $level + 1;
2169 # Do any pre-prompt actions.
2170 foreach $evalarg (@$pre) {
2174 # Complain about too much recursion if we passed the limit.
2175 print $OUT $stack_depth . " levels deep in subroutine calls!\n"
2178 # The line we're currently on. Set $incr to -1 to stay here
2179 # until we get a command that tells us to advance.
2181 $incr = -1; # for backward motion.
2183 # Tack preprompt debugger actions ahead of any actual input.
2184 @typeahead = ( @$pretype, @typeahead );
2186 =head2 WHERE ARE WE?
2188 XXX Relocate this section?
2190 The debugger normally shows the line corresponding to the current line of
2191 execution. Sometimes, though, we want to see the next line, or to move elsewhere
2192 in the file. This is done via the C<$incr>, C<$start>, and C<$max> variables.
2194 C<$incr> controls by how many lines the I<current> line should move forward
2195 after a command is executed. If set to -1, this indicates that the I<current>
2196 line shouldn't change.
2198 C<$start> is the I<current> line. It is used for things like knowing where to
2199 move forwards or backwards from when doing an C<L> or C<-> command.
2201 C<$max> tells the debugger where the last line of the current file is. It's
2202 used to terminate loops most often.
2204 =head2 THE COMMAND LOOP
2206 Most of C<DB::DB> is actually a command parsing and dispatch loop. It comes
2213 The outer part of the loop, starting at the C<CMD> label. This loop
2214 reads a command and then executes it.
2218 The inner part of the loop, starting at the C<PIPE> label. This part
2219 is wholly contained inside the C<CMD> block and only executes a command.
2220 Used to handle commands running inside a pager.
2224 So why have two labels to restart the loop? Because sometimes, it's easier to
2225 have a command I<generate> another command and then re-execute the loop to do
2226 the new command. This is faster, but perhaps a bit more convoluted.
2230 # The big command dispatch loop. It keeps running until the
2231 # user yields up control again.
2233 # If we have a terminal for input, and we get something back
2234 # from readline(), keep on processing.
2238 # We have a terminal, or can get one ...
2239 ( $term || &setterm ),
2241 # ... and it belogs to this PID or we get one for this PID ...
2242 ( $term_pid == $$ or resetterm(1) ),
2244 # ... and we got a line of command input ...
2247 "$pidprompt $tid DB"
2250 . ( '>' x $level ) . " "
2257 # ... try to execute the input as debugger commands.
2259 # Don't stop running.
2262 # No signal is active.
2265 # Handle continued commands (ending with \):
2266 $cmd =~ s/\\$/\n/ && do {
2267 $cmd .= &readline(" cont: ");
2271 =head4 The null command
2273 A newline entered by itself means I<re-execute the last command>. We grab the
2274 command out of C<$laststep> (where it was recorded previously), and copy it
2275 back into C<$cmd> to be executed below. If there wasn't any previous command,
2276 we'll do nothing below (no command will match). If there was, we also save it
2277 in the command history and fall through to allow the command parsing to pick
2282 # Empty input means repeat the last command.
2283 $cmd =~ /^$/ && ( $cmd = $laststep );
2284 chomp($cmd); # get rid of the annoying extra newline
2285 push( @hist, $cmd ) if length($cmd) > 1;
2286 push( @truehist, $cmd );
2290 # This is a restart point for commands that didn't arrive
2291 # via direct user input. It allows us to 'redo PIPE' to
2292 # re-execute command processing without reading a new command.
2294 $cmd =~ s/^\s+//s; # trim annoying leading whitespace
2295 $cmd =~ s/\s+$//s; # trim annoying trailing whitespace
2296 ($i) = split( /\s+/, $cmd );
2298 =head3 COMMAND ALIASES
2300 The debugger can create aliases for commands (these are stored in the
2301 C<%alias> hash). Before a command is executed, the command loop looks it up
2302 in the alias hash and substitutes the contents of the alias for the command,
2303 completely replacing it.
2307 # See if there's an alias for the command, and set it up if so.
2310 # Squelch signal handling; we want to keep control here
2311 # if something goes loco during the alias eval.
2312 local $SIG{__DIE__};
2313 local $SIG{__WARN__};
2315 # This is a command, so we eval it in the DEBUGGER's
2316 # scope! Otherwise, we can't see the special debugger
2317 # variables, or get to the debugger's subs. (Well, we
2318 # _could_, but why make it even more complicated?)
2319 eval "\$cmd =~ $alias{$i}";
2322 print $OUT "Couldn't evaluate '$i' alias: $@";
2325 } ## end if ($alias{$i})
2327 =head3 MAIN-LINE COMMANDS
2329 All of these commands work up to and after the program being debugged has
2334 Quit the debugger. This entails setting the C<$fall_off_end> flag, so we don't
2335 try to execute further, cleaning any restart-related stuff out of the
2336 environment, and executing with the last value of C<$?>.
2340 $cmd =~ /^q$/ && do {
2346 =head4 C<t> - trace [n]
2348 Turn tracing on or off. Inverts the appropriate bit in C<$trace> (q.v.).
2349 If level is specified, set C<$trace_to_depth>.
2353 $cmd =~ /^t(?:\s+(\d+))?$/ && do {
2357 $trace_to_depth = $levels ? $stack_depth + $levels : 1E9;
2358 print $OUT "Trace = "
2360 ? ( $levels ? "on (to level $trace_to_depth)" : "on" )
2365 =head4 C<S> - list subroutines matching/not matching a pattern
2367 Walks through C<%sub>, checking to see whether or not to print the name.
2371 $cmd =~ /^S(\s+(!)?(.+))?$/ && do {
2373 $Srev = defined $2; # Reverse scan?
2374 $Spatt = $3; # The pattern (if any) to use.
2375 $Snocheck = !defined $1; # No args - print all subs.
2377 # Need to make these sane here.
2381 # Search through the debugger's magical hash of subs.
2382 # If $nocheck is true, just print the sub name.
2383 # Otherwise, check it against the pattern. We then use
2384 # the XOR trick to reverse the condition as required.
2385 foreach $subname ( sort( keys %sub ) ) {
2386 if ( $Snocheck or $Srev ^ ( $subname =~ /$Spatt/ ) ) {
2387 print $OUT $subname, "\n";
2393 =head4 C<X> - list variables in current package
2395 Since the C<V> command actually processes this, just change this to the
2396 appropriate C<V> command and fall through.
2400 $cmd =~ s/^X\b/V $package/;
2402 =head4 C<V> - list variables
2404 Uses C<dumpvar.pl> to dump out the current values for selected variables.
2408 # Bare V commands get the currently-being-debugged package
2410 $cmd =~ /^V$/ && do {
2411 $cmd = "V $package";
2414 # V - show variables in package.
2415 $cmd =~ /^V\b\s*(\S+)\s*(.*)/ && do {
2417 # Save the currently selected filehandle and
2418 # force output to debugger's filehandle (dumpvar
2419 # just does "print" for output).
2420 local ($savout) = select($OUT);
2422 # Grab package name and variables to dump.
2424 @vars = split( ' ', $2 );
2426 # If main::dumpvar isn't here, get it.
2427 do 'dumpvar.pl' || die $@ unless defined &main::dumpvar;
2428 if ( defined &main::dumpvar ) {
2430 # We got it. Turn off subroutine entry/exit messages
2431 # for the moment, along with return values.
2435 # must detect sigpipe failures - not catching
2436 # then will cause the debugger to die.
2440 defined $option{dumpDepth}
2441 ? $option{dumpDepth}
2442 : -1, # assume -1 unless specified
2447 # The die doesn't need to include the $@, because
2448 # it will automatically get propagated for us.
2450 die unless $@ =~ /dumpvar print failed/;
2452 } ## end if (defined &main::dumpvar)
2455 # Couldn't load dumpvar.
2456 print $OUT "dumpvar.pl not available.\n";
2459 # Restore the output filehandle, and go round again.
2464 =head4 C<x> - evaluate and print an expression
2466 Hands the expression off to C<DB::eval>, setting it up to print the value
2467 via C<dumpvar.pl> instead of just printing it directly.
2471 $cmd =~ s/^x\b/ / && do { # Remainder gets done by DB::eval()
2472 $onetimeDump = 'dump'; # main::dumpvar shows the output
2474 # handle special "x 3 blah" syntax XXX propagate
2475 # doc back to special variables.
2476 if ( $cmd =~ s/^\s*(\d+)(?=\s)/ / ) {
2477 $onetimedumpDepth = $1;
2481 =head4 C<m> - print methods
2483 Just uses C<DB::methods> to determine what methods are available.
2487 $cmd =~ s/^m\s+([\w:]+)\s*$/ / && do {
2492 # m expr - set up DB::eval to do the work
2493 $cmd =~ s/^m\b/ / && do { # Rest gets done by DB::eval()
2494 $onetimeDump = 'methods'; # method output gets used there
2497 =head4 C<f> - switch files
2501 $cmd =~ /^f\b\s*(.*)/ && do {
2505 # help for no arguments (old-style was return from sub).
2508 "The old f command is now the r command.\n"; # hint
2509 print $OUT "The new f command switches filenames.\n";
2511 } ## end if (!$file)
2513 # if not in magic file list, try a close match.
2514 if ( !defined $main::{ '_<' . $file } ) {
2515 if ( ($try) = grep( m#^_<.*$file#, keys %main:: ) ) {
2517 $try = substr( $try, 2 );
2518 print $OUT "Choosing $try matching '$file':\n";
2521 } ## end if (($try) = grep(m#^_<.*$file#...
2522 } ## end if (!defined $main::{ ...
2524 # If not successfully switched now, we failed.
2525 if ( !defined $main::{ '_<' . $file } ) {
2526 print $OUT "No file matching '$file' is loaded.\n";
2530 # We switched, so switch the debugger internals around.
2531 elsif ( $file ne $filename ) {
2532 *dbline = $main::{ '_<' . $file };
2537 } ## end elsif ($file ne $filename)
2539 # We didn't switch; say we didn't.
2541 print $OUT "Already in $file.\n";
2546 =head4 C<.> - return to last-executed line.
2548 We set C<$incr> to -1 to indicate that the debugger shouldn't move ahead,
2549 and then we look up the line in the magical C<%dbline> hash.
2554 $cmd =~ /^\.$/ && do {
2555 $incr = -1; # stay at current line
2557 # Reset everything to the old location.
2559 $filename = $filename_ini;
2560 *dbline = $main::{ '_<' . $filename };
2564 print_lineinfo($position);
2568 =head4 C<-> - back one window
2570 We change C<$start> to be one window back; if we go back past the first line,
2571 we set it to be the first line. We ser C<$incr> to put us back at the
2572 currently-executing line, and then put a C<l $start +> (list one window from
2573 C<$start>) in C<$cmd> to be executed later.
2577 # - - back a window.
2578 $cmd =~ /^-$/ && do {
2580 # back up by a window; go to 1 if back too far.
2581 $start -= $incr + $window + 1;
2582 $start = 1 if $start <= 0;
2583 $incr = $window - 1;
2585 # Generate and execute a "l +" command (handled below).
2586 $cmd = 'l ' . ($start) . '+';
2589 =head3 PRE-580 COMMANDS VS. NEW COMMANDS: C<a, A, b, B, h, l, L, M, o, O, P, v, w, W, E<lt>, E<lt>E<lt>, {, {{>
2591 In Perl 5.8.0, a realignment of the commands was done to fix up a number of
2592 problems, most notably that the default case of several commands destroying
2593 the user's work in setting watchpoints, actions, etc. We wanted, however, to
2594 retain the old commands for those who were used to using them or who preferred
2595 them. At this point, we check for the new commands and call C<cmd_wrapper> to
2596 deal with them instead of processing them in-line.
2600 # All of these commands were remapped in perl 5.8.0;
2601 # we send them off to the secondary dispatcher (see below).
2602 $cmd =~ /^([aAbBeEhilLMoOPvwW]\b|[<>\{]{1,2})\s*(.*)/so && do {
2603 &cmd_wrapper( $1, $2, $line );
2607 =head4 C<y> - List lexicals in higher scope
2609 Uses C<PadWalker> to find the lexicals supplied as arguments in a scope
2610 above the current one and then displays then using C<dumpvar.pl>.
2614 $cmd =~ /^y(?:\s+(\d*)\s*(.*))?$/ && do {
2616 # See if we've got the necessary support.
2617 eval { require PadWalker; PadWalker->VERSION(0.08) }
2620 ? "PadWalker module not found - please install\n"
2625 # Load up dumpvar if we don't have it. If we can, that is.
2626 do 'dumpvar.pl' || die $@ unless defined &main::dumpvar;
2627 defined &main::dumpvar
2628 or print $OUT "dumpvar.pl not available.\n"
2631 # Got all the modules we need. Find them and print them.
2632 my @vars = split( ' ', $2 || '' );
2635 my $h = eval { PadWalker::peek_my( ( $1 || 0 ) + 1 ) };
2637 # Oops. Can't find it.
2638 $@ and $@ =~ s/ at .*//, &warn($@), next CMD;
2640 # Show the desired vars with dumplex().
2641 my $savout = select($OUT);
2643 # Have dumplex dump the lexicals.
2644 dumpvar::dumplex( $_, $h->{$_},
2645 defined $option{dumpDepth} ? $option{dumpDepth} : -1,
2652 =head3 COMMANDS NOT WORKING AFTER PROGRAM ENDS
2654 All of the commands below this point don't work after the program being
2655 debugged has ended. All of them check to see if the program has ended; this
2656 allows the commands to be relocated without worrying about a 'line of
2657 demarcation' above which commands can be entered anytime, and below which
2660 =head4 C<n> - single step, but don't trace down into subs
2662 Done by setting C<$single> to 2, which forces subs to execute straight through
2663 when entered (see C<DB::sub>). We also save the C<n> command in C<$laststep>,
2664 so a null command knows what to re-execute.
2669 $cmd =~ /^n$/ && do {
2670 end_report(), next CMD if $finished and $level <= 1;
2672 # Single step, but don't enter subs.
2675 # Save for empty command (repeat last).
2680 =head4 C<s> - single-step, entering subs
2682 Sets C<$single> to 1, which causes C<DB::sub> to continue tracing inside
2683 subs. Also saves C<s> as C<$lastcmd>.
2688 $cmd =~ /^s$/ && do {
2690 # Get out and restart the command loop if program
2692 end_report(), next CMD if $finished and $level <= 1;
2694 # Single step should enter subs.
2697 # Save for empty command (repeat last).
2702 =head4 C<c> - run continuously, setting an optional breakpoint
2704 Most of the code for this command is taken up with locating the optional
2705 breakpoint, which is either a subroutine name or a line number. We set
2706 the appropriate one-time-break in C<@dbline> and then turn off single-stepping
2707 in this and all call levels above this one.
2711 # c - start continuous execution.
2712 $cmd =~ /^c\b\s*([\w:]*)\s*$/ && do {
2714 # Hey, show's over. The debugged program finished
2715 # executing already.
2716 end_report(), next CMD if $finished and $level <= 1;
2718 # Capture the place to put a one-time break.
2721 # Probably not needed, since we finish an interactive
2722 # sub-session anyway...
2723 # local $filename = $filename;
2724 # local *dbline = *dbline; # XXX Would this work?!
2726 # The above question wonders if localizing the alias
2727 # to the magic array works or not. Since it's commented
2728 # out, we'll just leave that to speculation for now.
2730 # If the "subname" isn't all digits, we'll assume it
2731 # is a subroutine name, and try to find it.
2732 if ( $subname =~ /\D/ ) { # subroutine name
2733 # Qualify it to the current package unless it's
2734 # already qualified.
2735 $subname = $package . "::" . $subname
2736 unless $subname =~ /::/;
2738 # find_sub will return "file:line_number" corresponding
2739 # to where the subroutine is defined; we call find_sub,
2740 # break up the return value, and assign it in one
2742 ( $file, $i ) = ( find_sub($subname) =~ /^(.*):(.*)$/ );
2744 # Force the line number to be numeric.
2747 # If we got a line number, we found the sub.
2750 # Switch all the debugger's internals around so
2751 # we're actually working with that file.
2753 *dbline = $main::{ '_<' . $filename };
2755 # Mark that there's a breakpoint in this file.
2756 $had_breakpoints{$filename} |= 1;
2758 # Scan forward to the first executable line
2759 # after the 'sub whatever' line.
2761 ++$i while $dbline[$i] == 0 && $i < $max;
2764 # We didn't find a sub by that name.
2766 print $OUT "Subroutine $subname not found.\n";
2769 } ## end if ($subname =~ /\D/)
2771 # At this point, either the subname was all digits (an
2772 # absolute line-break request) or we've scanned through
2773 # the code following the definition of the sub, looking
2774 # for an executable, which we may or may not have found.
2776 # If $i (which we set $subname from) is non-zero, we
2777 # got a request to break at some line somewhere. On
2778 # one hand, if there wasn't any real subroutine name
2779 # involved, this will be a request to break in the current
2780 # file at the specified line, so we have to check to make
2781 # sure that the line specified really is breakable.
2783 # On the other hand, if there was a subname supplied, the
2784 # preceding block has moved us to the proper file and
2785 # location within that file, and then scanned forward
2786 # looking for the next executable line. We have to make
2787 # sure that one was found.
2789 # On the gripping hand, we can't do anything unless the
2790 # current value of $i points to a valid breakable line.
2795 if ( $dbline[$i] == 0 ) {
2796 print $OUT "Line $i not breakable.\n";
2800 # Yes. Set up the one-time-break sigil.
2801 $dbline{$i} =~ s/($|\0)/;9$1/; # add one-time-only b.p.
2804 # Turn off stack tracing from here up.
2805 for ( $i = 0 ; $i <= $stack_depth ; ) {
2806 $stack[ $i++ ] &= ~1;
2811 =head4 C<r> - return from a subroutine
2813 For C<r> to work properly, the debugger has to stop execution again
2814 immediately after the return is executed. This is done by forcing
2815 single-stepping to be on in the call level above the current one. If
2816 we are printing return values when a C<r> is executed, set C<$doret>
2817 appropriately, and force us out of the command loop.
2821 # r - return from the current subroutine.
2822 $cmd =~ /^r$/ && do {
2824 # Can't do anything if the program's over.
2825 end_report(), next CMD if $finished and $level <= 1;
2827 # Turn on stack trace.
2828 $stack[$stack_depth] |= 1;
2830 # Print return value unless the stack is empty.
2831 $doret = $option{PrintRet} ? $stack_depth - 1 : -2;
2835 =head4 C<T> - stack trace
2837 Just calls C<DB::print_trace>.
2841 $cmd =~ /^T$/ && do {
2842 print_trace( $OUT, 1 ); # skip DB
2846 =head4 C<w> - List window around current line.
2848 Just calls C<DB::cmd_w>.
2852 $cmd =~ /^w\b\s*(.*)/s && do { &cmd_w( 'w', $1 ); next CMD; };
2854 =head4 C<W> - watch-expression processing.
2856 Just calls C<DB::cmd_W>.
2860 $cmd =~ /^W\b\s*(.*)/s && do { &cmd_W( 'W', $1 ); next CMD; };
2862 =head4 C</> - search forward for a string in the source
2864 We take the argument and treat it as a pattern. If it turns out to be a
2865 bad one, we return the error we got from trying to C<eval> it and exit.
2866 If not, we create some code to do the search and C<eval> it so it can't
2871 $cmd =~ /^\/(.*)$/ && do {
2873 # The pattern as a string.
2876 # Remove the final slash.
2877 $inpat =~ s:([^\\])/$:$1:;
2879 # If the pattern isn't null ...
2880 if ( $inpat ne "" ) {
2882 # Turn of warn and die procesing for a bit.
2883 local $SIG{__DIE__};
2884 local $SIG{__WARN__};
2886 # Create the pattern.
2887 eval '$inpat =~ m' . "\a$inpat\a";
2890 # Oops. Bad pattern. No biscuit.
2891 # Print the eval error and go back for more
2897 } ## end if ($inpat ne "")
2899 # Set up to stop on wrap-around.
2902 # Don't move off the current line.
2905 # Done in eval so nothing breaks if the pattern
2906 # does something weird.
2909 # Move ahead one line.
2912 # Wrap if we pass the last line.
2913 $start = 1 if ($start > $max);
2915 # Stop if we have gotten back to this line again,
2916 last if ($start == $end);
2918 # A hit! (Note, though, that we are doing
2919 # case-insensitive matching. Maybe a qr//
2920 # expression would be better, so the user could
2921 # do case-sensitive matching if desired.
2922 if ($dbline[$start] =~ m' . "\a$pat\a" . 'i) {
2923 if ($slave_editor) {
2924 # Handle proper escaping in the slave.
2925 print $OUT "\032\032$filename:$start:0\n";
2928 # Just print the line normally.
2929 print $OUT "$start:\t",$dbline[$start],"\n";
2931 # And quit since we found something.
2936 # If we wrapped, there never was a match.
2937 print $OUT "/$pat/: not found\n" if ( $start == $end );
2941 =head4 C<?> - search backward for a string in the source
2943 Same as for C</>, except the loop runs backwards.
2947 # ? - backward pattern search.
2948 $cmd =~ /^\?(.*)$/ && do {
2950 # Get the pattern, remove trailing question mark.
2952 $inpat =~ s:([^\\])\?$:$1:;
2954 # If we've got one ...
2955 if ( $inpat ne "" ) {
2957 # Turn off die & warn handlers.
2958 local $SIG{__DIE__};
2959 local $SIG{__WARN__};
2960 eval '$inpat =~ m' . "\a$inpat\a";
2964 # Ouch. Not good. Print the error.
2969 } ## end if ($inpat ne "")
2971 # Where we are now is where to stop after wraparound.
2974 # Don't move away from this line.
2977 # Search inside the eval to prevent pattern badness
2984 # Wrap if we pass the first line.
2986 $start = $max if ($start <= 0);
2988 # Quit if we get back where we started,
2989 last if ($start == $end);
2992 if ($dbline[$start] =~ m' . "\a$pat\a" . 'i) {
2993 if ($slave_editor) {
2994 # Yep, follow slave editor requirements.
2995 print $OUT "\032\032$filename:$start:0\n";
2998 # Yep, just print normally.
2999 print $OUT "$start:\t",$dbline[$start],"\n";
3007 # Say we failed if the loop never found anything,
3008 print $OUT "?$pat?: not found\n" if ( $start == $end );
3012 =head4 C<$rc> - Recall command
3014 Manages the commands in C<@hist> (which is created if C<Term::ReadLine> reports
3015 that the terminal supports history). It find the the command required, puts it
3016 into C<$cmd>, and redoes the loop to execute it.
3020 # $rc - recall command.
3021 $cmd =~ /^$rc+\s*(-)?(\d+)?$/ && do {
3023 # No arguments, take one thing off history.
3024 pop(@hist) if length($cmd) > 1;
3026 # Relative (- found)?
3027 # Y - index back from most recent (by 1 if bare minus)
3028 # N - go to that particular command slot or the last
3029 # thing if nothing following.
3030 $i = $1 ? ( $#hist - ( $2 || 1 ) ) : ( $2 || $#hist );
3032 # Pick out the command desired.
3035 # Print the command to be executed and restart the loop
3036 # with that command in the buffer.
3037 print $OUT $cmd, "\n";
3041 =head4 C<$sh$sh> - C<system()> command
3043 Calls the C<DB::system()> to handle the command. This keeps the C<STDIN> and
3044 C<STDOUT> from getting messed up.
3048 # $sh$sh - run a shell command (if it's all ASCII).
3049 # Can't run shell commands with Unicode in the debugger, hmm.
3050 $cmd =~ /^$sh$sh\s*([\x00-\xff]*)/ && do {
3057 =head4 C<$rc I<pattern> $rc> - Search command history
3059 Another command to manipulate C<@hist>: this one searches it with a pattern.
3060 If a command is found, it is placed in C<$cmd> and executed via C<redo>.
3064 # $rc pattern $rc - find a command in the history.
3065 $cmd =~ /^$rc([^$rc].*)$/ && do {
3067 # Create the pattern to use.
3070 # Toss off last entry if length is >1 (and it always is).
3071 pop(@hist) if length($cmd) > 1;
3073 # Look backward through the history.
3074 for ( $i = $#hist ; $i ; --$i ) {
3076 # Stop if we find it.
3077 last if $hist[$i] =~ /$pat/;
3083 print $OUT "No such command!\n\n";
3087 # Found it. Put it in the buffer, print it, and process it.
3089 print $OUT $cmd, "\n";
3093 =head4 C<$sh> - Invoke a shell
3095 Uses C<DB::system> to invoke a shell.
3099 # $sh - start a shell.
3100 $cmd =~ /^$sh$/ && do {
3102 # Run the user's shell. If none defined, run Bourne.
3103 # We resume execution when the shell terminates.
3104 &system( $ENV{SHELL} || "/bin/sh" );
3108 =head4 C<$sh I<command>> - Force execution of a command in a shell
3110 Like the above, but the command is passed to the shell. Again, we use
3111 C<DB::system> to avoid problems with C<STDIN> and C<STDOUT>.
3115 # $sh command - start a shell and run a command in it.
3116 $cmd =~ /^$sh\s*([\x00-\xff]*)/ && do {
3118 # XXX: using csh or tcsh destroys sigint retvals!
3119 #&system($1); # use this instead
3121 # use the user's shell, or Bourne if none defined.
3122 &system( $ENV{SHELL} || "/bin/sh", "-c", $1 );
3126 =head4 C<H> - display commands in history
3128 Prints the contents of C<@hist> (if any).
3132 $cmd =~ /^H\b\s*\*/ && do {
3133 @hist = @truehist = ();
3134 print $OUT "History cleansed\n";
3138 $cmd =~ /^H\b\s*(-(\d+))?/ && do {
3140 # Anything other than negative numbers is ignored by
3141 # the (incorrect) pattern, so this test does nothing.
3142 $end = $2 ? ( $#hist - $2 ) : 0;
3144 # Set to the minimum if less than zero.
3145 $hist = 0 if $hist < 0;
3147 # Start at the end of the array.
3148 # Stay in while we're still above the ending value.
3149 # Tick back by one each time around the loop.
3150 for ( $i = $#hist ; $i > $end ; $i-- ) {
3152 # Print the command unless it has no arguments.
3153 print $OUT "$i: ", $hist[$i], "\n"
3154 unless $hist[$i] =~ /^.?$/;
3159 =head4 C<man, doc, perldoc> - look up documentation
3161 Just calls C<runman()> to print the appropriate document.
3165 # man, perldoc, doc - show manual pages.
3166 $cmd =~ /^(?:man|(?:perl)?doc)\b(?:\s+([^(]*))?$/ && do {
3173 Builds a C<print EXPR> expression in the C<$cmd>; this will get executed at
3174 the bottom of the loop.
3178 # p - print (no args): print $_.
3179 $cmd =~ s/^p$/print {\$DB::OUT} \$_/;
3181 # p - print the given expression.
3182 $cmd =~ s/^p\b/print {\$DB::OUT} /;
3184 =head4 C<=> - define command alias
3186 Manipulates C<%alias> to add or list command aliases.
3190 # = - set up a command alias.
3191 $cmd =~ s/^=\s*// && do {
3193 if ( length $cmd == 0 ) {
3195 # No args, get current aliases.
3196 @keys = sort keys %alias;
3198 elsif ( my ( $k, $v ) = ( $cmd =~ /^(\S+)\s+(\S.*)/ ) ) {
3200 # Creating a new alias. $k is alias name, $v is
3203 # can't use $_ or kill //g state
3204 for my $x ( $k, $v ) {
3206 # Escape "alarm" characters.
3210 # Substitute key for value, using alarm chars
3211 # as separators (which is why we escaped them in
3213 $alias{$k} = "s\a$k\a$v\a";
3215 # Turn off standard warn and die behavior.
3216 local $SIG{__DIE__};
3217 local $SIG{__WARN__};
3220 unless ( eval "sub { s\a$k\a$v\a }; 1" ) {
3222 # Nope. Bad alias. Say so and get out.
3223 print $OUT "Can't alias $k to $v: $@\n";
3228 # We'll only list the new one.
3230 } ## end elsif (my ($k, $v) = ($cmd...
3232 # The argument is the alias to list.
3240 # Messy metaquoting: Trim the substitution code off.
3241 # We use control-G as the delimiter because it's not
3242 # likely to appear in the alias.
3243 if ( ( my $v = $alias{$k} ) =~ s
\as\a$k\a(.*)\a$
\a1
\a ) {
3246 print $OUT "$k\t= $1\n";
3248 elsif ( defined $alias{$k} ) {
3250 # Couldn't trim it off; just print the alias code.
3251 print $OUT "$k\t$alias{$k}\n";
3256 print "No alias for $k\n";
3258 } ## end for my $k (@keys)
3262 =head4 C<source> - read commands from a file.
3264 Opens a lexical filehandle and stacks it on C<@cmdfhs>; C<DB::readline> will
3269 # source - read commands from a file (or pipe!) and execute.
3270 $cmd =~ /^source\s+(.*\S)/ && do {
3271 if ( open my $fh, $1 ) {
3273 # Opened OK; stick it in the list of file handles.
3279 &warn("Can't execute '$1': $!\n");
3284 $cmd =~ /^(enable|disable)\s+(\S+)\s*$/ && do {
3285 my ($cmd, $position) = ($1, $2);
3287 my ($fn, $line_num);
3288 if ($position =~ m{\A\d+\z})
3291 $line_num = $position;
3293 elsif ($position =~ m{\A(.*):(\d+)\z})
3295 ($fn, $line_num) = ($1, $2);
3299 &warn("Wrong spec for enable/disable argument.\n");
3303 if (_has_breakpoint_data_ref($fn, $line_num)) {
3304 _set_breakpoint_enabled_status($fn, $line_num,
3305 ($cmd eq 'enable' ? 1 : '')
3309 &warn("No breakpoint set at ${fn}:${line_num}\n");
3316 =head4 C<save> - send current history to a file
3318 Takes the complete history, (not the shrunken version you see with C<H>),
3319 and saves it to the given filename, so it can be replayed using C<source>.
3321 Note that all C<^(save|source)>'s are commented out with a view to minimise recursion.
3325 # save source - write commands to a file for later use
3326 $cmd =~ /^save\s*(.*)$/ && do {
3327 my $file = $1 || '.perl5dbrc'; # default?
3328 if ( open my $fh, "> $file" ) {
3330 # chomp to remove extraneous newlines from source'd files
3331 chomp( my @truelist =
3332 map { m/^\s*(save|source)/ ? "#$_" : $_ }
3334 print $fh join( "\n", @truelist );
3335 print "commands saved in $file\n";
3338 &warn("Can't save debugger commands in '$1': $!\n");
3343 =head4 C<R> - restart
3345 Restart the debugger session.
3347 =head4 C<rerun> - rerun the current session
3349 Return to any given position in the B<true>-history list
3353 # R - restart execution.
3354 # rerun - controlled restart execution.
3355 $cmd =~ /^(R|rerun\s*(.*))$/ && do {
3356 my @args = ($1 eq 'R' ? restart() : rerun($2));
3358 # Close all non-system fds for a clean restart. A more
3359 # correct method would be to close all fds that were not
3360 # open when the process started, but this seems to be
3361 # hard. See "debugger 'R'estart and open database
3362 # connections" on p5p.
3364 my $max_fd = 1024; # default if POSIX can't be loaded
3365 if (eval { require POSIX }) {
3366 eval { $max_fd = POSIX::sysconf(POSIX::_SC_OPEN_MAX()) };
3369 if (defined $max_fd) {
3370 foreach ($^F+1 .. $max_fd-1) {
3371 next unless open FD_TO_CLOSE, "<&=$_";
3376 # And run Perl again. We use exec() to keep the
3377 # PID stable (and that way $ini_pids is still valid).
3378 exec(@args) || print $OUT "exec failed: $!\n";
3383 =head4 C<|, ||> - pipe output through the pager.
3385 For C<|>, we save C<OUT> (the debugger's output filehandle) and C<STDOUT>
3386 (the program's standard output). For C<||>, we only save C<OUT>. We open a
3387 pipe to the pager (restoring the output filehandles if this fails). If this
3388 is the C<|> command, we also set up a C<SIGPIPE> handler which will simply
3389 set C<$signal>, sending us back into the debugger.
3391 We then trim off the pipe symbols and C<redo> the command loop at the
3392 C<PIPE> label, causing us to evaluate the command in C<$cmd> without
3397 # || - run command in the pager, with output to DB::OUT.
3398 $cmd =~ /^\|\|?\s*[^|]/ && do {
3399 if ( $pager =~ /^\|/ ) {
3401 # Default pager is into a pipe. Redirect I/O.
3402 open( SAVEOUT, ">&STDOUT" )
3403 || &warn("Can't save STDOUT");
3404 open( STDOUT, ">&OUT" )
3405 || &warn("Can't redirect STDOUT");
3406 } ## end if ($pager =~ /^\|/)
3409 # Not into a pipe. STDOUT is safe.
3410 open( SAVEOUT, ">&OUT" ) || &warn("Can't save DB::OUT");
3413 # Fix up environment to record we have less if so.
3416 unless ( $piped = open( OUT, $pager ) ) {
3418 # Couldn't open pipe to pager.
3419 &warn("Can't pipe output to '$pager'");
3420 if ( $pager =~ /^\|/ ) {
3422 # Redirect I/O back again.
3423 open( OUT, ">&STDOUT" ) # XXX: lost message
3424 || &warn("Can't restore DB::OUT");
3425 open( STDOUT, ">&SAVEOUT" )
3426 || &warn("Can't restore STDOUT");
3428 } ## end if ($pager =~ /^\|/)
3431 # Redirect I/O. STDOUT already safe.
3432 open( OUT, ">&STDOUT" ) # XXX: lost message
3433 || &warn("Can't restore DB::OUT");
3436 } ## end unless ($piped = open(OUT,...
3438 # Set up broken-pipe handler if necessary.
3439 $SIG{PIPE} = \&DB::catch
3441 && ( "" eq $SIG{PIPE} || "DEFAULT" eq $SIG{PIPE} );
3443 # Save current filehandle, unbuffer out, and put it back.
3444 $selected = select(OUT);
3447 # Don't put it back if pager was a pipe.
3448 select($selected), $selected = "" unless $cmd =~ /^\|\|/;
3450 # Trim off the pipe symbols and run the command now.
3451 $cmd =~ s/^\|+\s*//;
3455 =head3 END OF COMMAND PARSING
3457 Anything left in C<$cmd> at this point is a Perl expression that we want to
3458 evaluate. We'll always evaluate in the user's context, and fully qualify
3459 any variables we might want to address in the C<DB> package.
3463 # t - turn trace on.
3464 $cmd =~ s/^t\s+(\d+)?/\$DB::trace |= 1;\n/ && do {
3465 $trace_to_depth = $1 ? $stack_depth||0 + $1 : 1E9;
3468 # s - single-step. Remember the last command was 's'.
3469 $cmd =~ s/^s\s/\$DB::single = 1;\n/ && do { $laststep = 's' };
3471 # n - single-step, but not into subs. Remember last command
3473 $cmd =~ s/^n\s/\$DB::single = 2;\n/ && do { $laststep = 'n' };
3477 # Make sure the flag that says "the debugger's running" is
3478 # still on, to make sure we get control again.
3479 $evalarg = "\$^D = \$^D | \$DB::db_stop;\n$cmd";
3481 # Run *our* eval that executes in the caller's context.
3484 # Turn off the one-time-dump stuff now.
3486 $onetimeDump = undef;
3487 $onetimedumpDepth = undef;
3489 elsif ( $term_pid == $$ ) {
3490 eval { # May run under miniperl, when not available...
3495 # XXX If this is the master pid, print a newline.
3498 } ## end while (($term || &setterm...
3500 =head3 POST-COMMAND PROCESSING
3502 After each command, we check to see if the command output was piped anywhere.
3503 If so, we go through the necessary code to unhook the pipe and go back to
3504 our standard filehandles for input and output.
3510 # At the end of every command:
3513 # Unhook the pipe mechanism now.
3514 if ( $pager =~ /^\|/ ) {
3516 # No error from the child.
3519 # we cannot warn here: the handle is missing --tchrist
3520 close(OUT) || print SAVEOUT "\nCan't close DB::OUT\n";
3522 # most of the $? crud was coping with broken cshisms
3523 # $? is explicitly set to 0, so this never runs.
3525 print SAVEOUT "Pager '$pager' failed: ";
3527 print SAVEOUT "shell returned -1\n";
3530 print SAVEOUT ( $? & 127 )
3531 ? " (SIG#" . ( $? & 127 ) . ")"
3532 : "", ( $? & 128 ) ? " -- core dumped" : "", "\n";
3535 print SAVEOUT "status ", ( $? >> 8 ), "\n";
3539 # Reopen filehandle for our output (if we can) and
3540 # restore STDOUT (if we can).
3541 open( OUT, ">&STDOUT" ) || &warn("Can't restore DB::OUT");
3542 open( STDOUT, ">&SAVEOUT" )
3543 || &warn("Can't restore STDOUT");
3545 # Turn off pipe exception handler if necessary.
3546 $SIG{PIPE} = "DEFAULT" if $SIG{PIPE} eq \&DB::catch;
3548 # Will stop ignoring SIGPIPE if done like nohup(1)
3549 # does SIGINT but Perl doesn't give us a choice.
3550 } ## end if ($pager =~ /^\|/)
3553 # Non-piped "pager". Just restore STDOUT.
3554 open( OUT, ">&SAVEOUT" ) || &warn("Can't restore DB::OUT");
3557 # Close filehandle pager was using, restore the normal one
3560 select($selected), $selected = "" unless $selected eq "";
3564 } ## end if ($piped)
3567 =head3 COMMAND LOOP TERMINATION
3569 When commands have finished executing, we come here. If the user closed the
3570 input filehandle, we turn on C<$fall_off_end> to emulate a C<q> command. We
3571 evaluate any post-prompt items. We restore C<$@>, C<$!>, C<$^E>, C<$,>, C<$/>,
3572 C<$\>, and C<$^W>, and return a null list as expected by the Perl interpreter.
3573 The interpreter will then execute the next line and then return control to us
3578 # No more commands? Quit.
3579 $fall_off_end = 1 unless defined $cmd; # Emulate 'q' on EOF
3581 # Evaluate post-prompt commands.
3582 foreach $evalarg (@$post) {
3585 } # if ($single || $signal)
3587 # Put the user's globals back where you found them.
3588 ( $@, $!, $^E, $,, $/, $\, $^W ) = @saved;
3592 # The following code may be executed now:
3597 C<sub> is called whenever a subroutine call happens in the program being
3598 debugged. The variable C<$DB::sub> contains the name of the subroutine
3601 The core function of this subroutine is to actually call the sub in the proper
3602 context, capturing its output. This of course causes C<DB::DB> to get called
3603 again, repeating until the subroutine ends and returns control to C<DB::sub>
3604 again. Once control returns, C<DB::sub> figures out whether or not to dump the
3605 return value, and returns its captured copy of the return value as its own
3606 return value. The value then feeds back into the program being debugged as if
3607 C<DB::sub> hadn't been there at all.
3609 C<sub> does all the work of printing the subroutine entry and exit messages
3610 enabled by setting C<$frame>. It notes what sub the autoloader got called for,
3611 and also prints the return value if needed (for the C<r> command and if
3612 the 16 bit is set in C<$frame>).
3614 It also tracks the subroutine call depth by saving the current setting of
3615 C<$single> in the C<@stack> package global; if this exceeds the value in
3616 C<$deep>, C<sub> automatically turns on printing of the current depth by
3617 setting the C<4> bit in C<$single>. In any case, it keeps the current setting
3618 of stop/don't stop on entry to subs set as it currently is set.
3620 =head3 C<caller()> support
3622 If C<caller()> is called from the package C<DB>, it provides some
3623 additional data, in the following order:
3629 The package name the sub was in
3631 =item * C<$filename>
3633 The filename it was defined in
3637 The line number it was defined on
3639 =item * C<$subroutine>
3641 The subroutine name; C<(eval)> if an C<eval>().
3645 1 if it has arguments, 0 if not
3647 =item * C<$wantarray>
3649 1 if array context, 0 if scalar context
3651 =item * C<$evaltext>
3653 The C<eval>() text, if any (undefined for C<eval BLOCK>)
3655 =item * C<$is_require>
3657 frame was created by a C<use> or C<require> statement
3661 pragma information; subject to change between versions
3665 pragma information; subject to change between versions
3667 =item * C<@DB::args>
3669 arguments with which the subroutine was invoked
3676 # Do not use a regex in this subroutine -> results in corrupted memory
3677 # See: [perl #66110]
3679 # lock ourselves under threads
3682 # Whether or not the autoloader was running, a scalar to put the
3683 # sub's return value in (if needed), and an array to put the sub's
3684 # return value in (if needed).
3685 my ( $al, $ret, @ret ) = "";
3686 if ($sub eq 'threads::new' && $ENV{PERL5DB_THREADED}) {
3687 print "creating new thread\n";
3690 # If the last ten characters are '::AUTOLOAD', note we've traced
3691 # into AUTOLOAD for $sub.
3692 if ( length($sub) > 10 && substr( $sub, -10, 10 ) eq '::AUTOLOAD' ) {
3693 $al = " for $$sub" if defined $$sub;
3696 # We stack the stack pointer and then increment it to protect us
3697 # from a situation that might unwind a whole bunch of call frames
3698 # at once. Localizing the stack pointer means that it will automatically
3699 # unwind the same amount when multiple stack frames are unwound.
3700 local $stack_depth = $stack_depth + 1; # Protect from non-local exits
3703 $#stack = $stack_depth;
3705 # Save current single-step setting.
3706 $stack[-1] = $single;
3708 # Turn off all flags except single-stepping.
3711 # If we've gotten really deeply recursed, turn on the flag that will
3712 # make us stop with the 'deep recursion' message.
3713 $single |= 4 if $stack_depth == $deep;
3715 # If frame messages are on ...
3717 $frame & 4 # Extended frame entry message
3719 print_lineinfo( ' ' x ( $stack_depth - 1 ), "in " ),
3721 # Why -1? But it works! :-(
3722 # Because print_trace will call add 1 to it and then call
3723 # dump_trace; this results in our skipping -1+1 = 0 stack frames
3725 print_trace( $LINEINFO, -1, 1, 1, "$sub$al" )
3727 : print_lineinfo( ' ' x ( $stack_depth - 1 ), "entering $sub$al\n" )
3729 # standard frame entry message
3733 # Determine the sub's return type, and capture appropriately.
3736 # Called in array context. call sub and capture output.
3737 # DB::DB will recursively get control again if appropriate; we'll come
3738 # back here when the sub is finished.
3741 # Pop the single-step value back off the stack.
3742 $single |= $stack[ $stack_depth-- ];
3744 # Check for exit trace messages...
3746 $frame & 4 # Extended exit message
3748 print_lineinfo( ' ' x $stack_depth, "out " ),
3749 print_trace( $LINEINFO, -1, 1, 1, "$sub$al" )
3751 : print_lineinfo( ' ' x $stack_depth, "exited $sub$al\n" )
3753 # Standard exit message
3757 # Print the return info if we need to.
3758 if ( $doret eq $stack_depth or $frame & 16 ) {
3760 # Turn off output record separator.
3762 my $fh = ( $doret eq $stack_depth ? $OUT : $LINEINFO );
3764 # Indent if we're printing because of $frame tracing.
3765 print $fh ' ' x $stack_depth if $frame & 16;
3767 # Print the return value.
3768 print $fh "list context return from $sub:\n";
3769 dumpit( $fh, \@ret );
3771 # And don't print it again.
3773 } ## end if ($doret eq $stack_depth...
3774 # And we have to return the return value now.
3776 } ## end if (wantarray)
3780 if ( defined wantarray ) {
3782 # Save the value if it's wanted at all.
3787 # Void return, explicitly.
3792 # Pop the single-step value off the stack.
3793 $single |= $stack[ $stack_depth-- ];
3795 # If we're doing exit messages...
3797 $frame & 4 # Extended messages
3799 print_lineinfo( ' ' x $stack_depth, "out " ),
3800 print_trace( $LINEINFO, -1, 1, 1, "$sub$al" )
3802 : print_lineinfo( ' ' x $stack_depth, "exited $sub$al\n" )
3808 # If we are supposed to show the return value... same as before.
3809 if ( $doret eq $stack_depth or $frame & 16 and defined wantarray ) {
3811 my $fh = ( $doret eq $stack_depth ? $OUT : $LINEINFO );
3812 print $fh ( ' ' x $stack_depth ) if $frame & 16;
3815 ? "scalar context return from $sub: "
3816 : "void context return from $sub\n"
3818 dumpit( $fh, $ret ) if defined wantarray;
3820 } ## end if ($doret eq $stack_depth...
3822 # Return the appropriate scalar value.
3824 } ## end else [ if (wantarray)
3829 # lock ourselves under threads
3832 # Whether or not the autoloader was running, a scalar to put the
3833 # sub's return value in (if needed), and an array to put the sub's
3834 # return value in (if needed).
3835 my ( $al, $ret, @ret ) = "";
3836 if ($sub =~ /^threads::new$/ && $ENV{PERL5DB_THREADED}) {
3837 print "creating new thread\n";
3840 # If the last ten characters are C'::AUTOLOAD', note we've traced
3841 # into AUTOLOAD for $sub.
3842 if ( length($sub) > 10 && substr( $sub, -10, 10 ) eq '::AUTOLOAD' ) {
3846 # We stack the stack pointer and then increment it to protect us
3847 # from a situation that might unwind a whole bunch of call frames
3848 # at once. Localizing the stack pointer means that it will automatically
3849 # unwind the same amount when multiple stack frames are unwound.
3850 local $stack_depth = $stack_depth + 1; # Protect from non-local exits
3853 $#stack = $stack_depth;
3855 # Save current single-step setting.
3856 $stack[-1] = $single;
3858 # Turn off all flags except single-stepping.
3861 # If we've gotten really deeply recursed, turn on the flag that will
3862 # make us stop with the 'deep recursion' message.
3863 $single |= 4 if $stack_depth == $deep;
3865 # If frame messages are on ...
3867 $frame & 4 # Extended frame entry message
3869 print_lineinfo( ' ' x ( $stack_depth - 1 ), "in " ),
3871 # Why -1? But it works! :-(
3872 # Because print_trace will call add 1 to it and then call
3873 # dump_trace; this results in our skipping -1+1 = 0 stack frames
3875 print_trace( $LINEINFO, -1, 1, 1, "$sub$al" )
3877 : print_lineinfo( ' ' x ( $stack_depth - 1 ), "entering $sub$al\n" )
3879 # standard frame entry message
3883 # Pop the single-step value back off the stack.
3884 $single |= $stack[ $stack_depth-- ];
3886 # call the original lvalue sub.
3890 # Abstracting common code from multiple places elsewhere:
3891 sub depth_print_lineinfo {
3892 print_lineinfo( @_ ) if $stack_depth < $trace_to_depth;
3895 =head1 EXTENDED COMMAND HANDLING AND THE COMMAND API
3897 In Perl 5.8.0, there was a major realignment of the commands and what they did,
3898 Most of the changes were to systematize the command structure and to eliminate
3899 commands that threw away user input without checking.
3901 The following sections describe the code added to make it easy to support
3902 multiple command sets with conflicting command names. This section is a start
3903 at unifying all command processing to make it simpler to develop commands.
3905 Note that all the cmd_[a-zA-Z] subroutines require the command name, a line
3906 number, and C<$dbline> (the current line) as arguments.
3908 Support functions in this section which have multiple modes of failure C<die>
3909 on error; the rest simply return a false value.
3911 The user-interface functions (all of the C<cmd_*> functions) just output
3916 The C<%set> hash defines the mapping from command letter to subroutine
3919 C<%set> is a two-level hash, indexed by set name and then by command name.
3920 Note that trying to set the CommandSet to C<foobar> simply results in the
3921 5.8.0 command set being used, since there's no top-level entry for C<foobar>.
3930 'A' => 'pre580_null',
3932 'B' => 'pre580_null',
3933 'd' => 'pre580_null',
3936 'M' => 'pre580_null',
3938 'o' => 'pre580_null',
3944 '<' => 'pre590_prepost',
3945 '<<' => 'pre590_prepost',
3946 '>' => 'pre590_prepost',
3947 '>>' => 'pre590_prepost',
3948 '{' => 'pre590_prepost',
3949 '{{' => 'pre590_prepost',
3953 my %breakpoints_data;
3955 sub _has_breakpoint_data_ref {
3956 my ($filename, $line) = @_;
3959 exists( $breakpoints_data{$filename} )
3961 exists( $breakpoints_data{$filename}{$line} )
3965 sub _get_breakpoint_data_ref {
3966 my ($filename, $line) = @_;
3968 return ($breakpoints_data{$filename}{$line} ||= +{});
3971 sub _delete_breakpoint_data_ref {
3972 my ($filename, $line) = @_;
3974 delete($breakpoints_data{$filename}{$line});
3975 if (! scalar(keys( %{$breakpoints_data{$filename}} )) ) {
3976 delete($breakpoints_data{$filename});
3982 sub _set_breakpoint_enabled_status {
3983 my ($filename, $line, $status) = @_;
3985 _get_breakpoint_data_ref($filename, $line)->{'enabled'} =
3992 sub _is_breakpoint_enabled {
3993 my ($filename, $line) = @_;
3995 return _get_breakpoint_data_ref($filename, $line)->{'enabled'};
3998 =head2 C<cmd_wrapper()> (API)
4000 C<cmd_wrapper()> allows the debugger to switch command sets
4001 depending on the value of the C<CommandSet> option.
4003 It tries to look up the command in the C<%set> package-level I<lexical>
4004 (which means external entities can't fiddle with it) and create the name of
4005 the sub to call based on the value found in the hash (if it's there). I<All>
4006 of the commands to be handled in a set have to be added to C<%set>; if they
4007 aren't found, the 5.8.0 equivalent is called (if there is one).
4009 This code uses symbolic references.
4016 my $dblineno = shift;
4018 # Assemble the command subroutine's name by looking up the
4019 # command set and command name in %set. If we can't find it,
4020 # default to the older version of the command.
4022 . ( $set{$CommandSet}{$cmd}
4023 || ( $cmd =~ /^[<>{]+/o ? 'prepost' : $cmd ) );
4025 # Call the command subroutine, call it by name.
4026 return &$call( $cmd, $line, $dblineno );
4027 } ## end sub cmd_wrapper
4029 =head3 C<cmd_a> (command)
4031 The C<a> command handles pre-execution actions. These are associated with a
4032 particular line, so they're stored in C<%dbline>. We default to the current
4033 line if none is specified.
4039 my $line = shift || ''; # [.|line] expr
4042 # If it's dot (here), or not all digits, use the current line.
4043 $line =~ s/^(\.|(?:[^\d]))/$dbline/;
4045 # Should be a line number followed by an expression.
4046 if ( $line =~ /^\s*(\d*)\s*(\S.+)/ ) {
4047 my ( $lineno, $expr ) = ( $1, $2 );
4049 # If we have an expression ...
4050 if ( length $expr ) {
4052 # ... but the line isn't breakable, complain.
4053 if ( $dbline[$lineno] == 0 ) {
4055 "Line $lineno($dbline[$lineno]) does not have an action?\n";
4059 # It's executable. Record that the line has an action.
4060 $had_breakpoints{$filename} |= 2;
4062 # Remove any action, temp breakpoint, etc.
4063 $dbline{$lineno} =~ s/\0[^\0]*//;
4065 # Add the action to the line.
4066 $dbline{$lineno} .= "\0" . action($expr);
4068 } ## end if (length $expr)
4069 } ## end if ($line =~ /^\s*(\d*)\s*(\S.+)/)
4074 "Adding an action requires an optional lineno and an expression\n"
4079 =head3 C<cmd_A> (command)
4081 Delete actions. Similar to above, except the delete code is in a separate
4082 subroutine, C<delete_action>.
4088 my $line = shift || '';
4092 $line =~ s/^\./$dbline/;
4094 # Call delete_action with a null param to delete them all.
4095 # The '1' forces the eval to be true. It'll be false only
4096 # if delete_action blows up for some reason, in which case
4097 # we print $@ and get out.
4098 if ( $line eq '*' ) {
4099 eval { &delete_action(); 1 } or print $OUT $@ and return;
4102 # There's a real line number. Pass it to delete_action.
4103 # Error trapping is as above.
4104 elsif ( $line =~ /^(\S.*)/ ) {
4105 eval { &delete_action($1); 1 } or print $OUT $@ and return;
4108 # Swing and a miss. Bad syntax.
4111 "Deleting an action requires a line number, or '*' for all\n" ; # hint
4115 =head3 C<delete_action> (API)
4117 C<delete_action> accepts either a line number or C<undef>. If a line number
4118 is specified, we check for the line being executable (if it's not, it
4119 couldn't have had an action). If it is, we just take the action off (this
4120 will get any kind of an action, including breakpoints).
4126 if ( defined($i) ) {
4129 die "Line $i has no action .\n" if $dbline[$i] == 0;
4131 # Nuke whatever's there.
4132 $dbline{$i} =~ s/\0[^\0]*//; # \^a
4133 delete $dbline{$i} if $dbline{$i} eq '';
4136 print $OUT "Deleting all actions...\n";
4137 for my $file ( keys %had_breakpoints ) {
4138 local *dbline = $main::{ '_<' . $file };
4141 for ( $i = 1 ; $i <= $max ; $i++ ) {
4142 if ( defined $dbline{$i} ) {
4143 $dbline{$i} =~ s/\0[^\0]*//;
4144 delete $dbline{$i} if $dbline{$i} eq '';
4146 unless ( $had_breakpoints{$file} &= ~2 ) {
4147 delete $had_breakpoints{$file};
4149 } ## end for ($i = 1 ; $i <= $max...
4150 } ## end for my $file (keys %had_breakpoints)
4151 } ## end else [ if (defined($i))
4152 } ## end sub delete_action
4154 =head3 C<cmd_b> (command)
4156 Set breakpoints. Since breakpoints can be set in so many places, in so many
4157 ways, conditionally or not, the breakpoint code is kind of complex. Mostly,
4158 we try to parse the command type, and then shuttle it off to an appropriate
4159 subroutine to actually do the work of setting the breakpoint in the right
4166 my $line = shift; # [.|line] [cond]
4169 # Make . the current line number if it's there..
4170 $line =~ s/^\.\b/$dbline/;
4172 # No line number, no condition. Simple break on current line.
4173 if ( $line =~ /^\s*$/ ) {
4174 &cmd_b_line( $dbline, 1 );
4177 # Break on load for a file.
4178 elsif ( $line =~ /^load\b\s*(.*)/ ) {
4184 # b compile|postpone <some sub> [<condition>]
4185 # The interpreter actually traps this one for us; we just put the
4186 # necessary condition in the %postponed hash.
4187 elsif ( $line =~ /^(postpone|compile)\b\s*([':A-Za-z_][':\w]*)\s*(.*)/ ) {
4189 # Capture the condition if there is one. Make it true if none.
4190 my $cond = length $3 ? $3 : '1';
4192 # Save the sub name and set $break to 1 if $1 was 'postpone', 0
4193 # if it was 'compile'.
4194 my ( $subname, $break ) = ( $2, $1 eq 'postpone' );
4196 # De-Perl4-ify the name - ' separators to ::.
4197 $subname =~ s/\'/::/g;
4199 # Qualify it into the current package unless it's already qualified.
4200 $subname = "${'package'}::" . $subname unless $subname =~ /::/;
4202 # Add main if it starts with ::.
4203 $subname = "main" . $subname if substr( $subname, 0, 2 ) eq "::";
4205 # Save the break type for this sub.
4206 $postponed{$subname} = $break ? "break +0 if $cond" : "compile";
4207 } ## end elsif ($line =~ ...
4208 # b <filename>:<line> [<condition>]
4209 elsif ($line =~ /\A(\S+[^:]):(\d+)\s*(.*)/ms) {
4210 my ($filename, $line_num, $cond) = ($1, $2, $3);
4211 cmd_b_filename_line(
4214 (length($cond) ? $cond : '1'),
4217 # b <sub name> [<condition>]
4218 elsif ( $line =~ /^([':A-Za-z_][':\w]*(?:\[.*\])?)\s*(.*)/ ) {
4222 $cond = length $2 ? $2 : '1';
4223 &cmd_b_sub( $subname, $cond );
4226 # b <line> [<condition>].
4227 elsif ( $line =~ /^(\d*)\s*(.*)/ ) {
4229 # Capture the line. If none, it's the current line.
4230 $line = $1 || $dbline;
4232 # If there's no condition, make it '1'.
4233 $cond = length $2 ? $2 : '1';
4236 &cmd_b_line( $line, $cond );
4239 # Line didn't make sense.
4241 print "confused by line($line)?\n";
4245 =head3 C<break_on_load> (API)
4247 We want to break when this file is loaded. Mark this file in the
4248 C<%break_on_load> hash, and note that it has a breakpoint in
4249 C<%had_breakpoints>.
4255 $break_on_load{$file} = 1;
4256 $had_breakpoints{$file} |= 1;
4259 =head3 C<report_break_on_load> (API)
4261 Gives us an array of filenames that are set to break on load. Note that
4262 only files with break-on-load are in here, so simply showing the keys
4267 sub report_break_on_load {
4268 sort keys %break_on_load;
4271 =head3 C<cmd_b_load> (command)
4273 We take the file passed in and try to find it in C<%INC> (which maps modules
4274 to files they came from). We mark those files for break-on-load via
4275 C<break_on_load> and then report that it was done.
4283 # This is a block because that way we can use a redo inside it
4284 # even without there being any looping structure at all outside it.
4287 # Save short name and full path if found.
4289 push @files, $::INC{$file} if $::INC{$file};
4291 # Tack on .pm and do it again unless there was a '.' in the name
4293 $file .= '.pm', redo unless $file =~ /\./;
4296 # Do the real work here.
4297 break_on_load($_) for @files;
4299 # All the files that have break-on-load breakpoints.
4300 @files = report_break_on_load;
4302 # Normalize for the purposes of our printing this.
4305 print $OUT "Will stop on load of '@files'.\n";
4306 } ## end sub cmd_b_load
4308 =head3 C<$filename_error> (API package global)
4310 Several of the functions we need to implement in the API need to work both
4311 on the current file and on other files. We don't want to duplicate code, so
4312 C<$filename_error> is used to contain the name of the file that's being
4313 worked on (if it's not the current one).
4315 We can now build functions in pairs: the basic function works on the current
4316 file, and uses C<$filename_error> as part of its error message. Since this is
4317 initialized to C<"">, no filename will appear when we are working on the
4320 The second function is a wrapper which does the following:
4326 Localizes C<$filename_error> and sets it to the name of the file to be processed.
4330 Localizes the C<*dbline> glob and reassigns it to point to the file we want to process.
4334 Calls the first function.
4336 The first function works on the I<current> file (i.e., the one we changed to),
4337 and prints C<$filename_error> in the error message (the name of the other file)
4338 if it needs to. When the functions return, C<*dbline> is restored to point
4339 to the actual current file (the one we're executing in) and
4340 C<$filename_error> is restored to C<"">. This restores everything to
4341 the way it was before the second function was called at all.
4343 See the comments in C<breakable_line> and C<breakable_line_in_file> for more
4350 $filename_error = '';
4352 =head3 breakable_line(from, to) (API)
4354 The subroutine decides whether or not a line in the current file is breakable.
4355 It walks through C<@dbline> within the range of lines specified, looking for
4356 the first line that is breakable.
4358 If C<$to> is greater than C<$from>, the search moves forwards, finding the
4359 first line I<after> C<$to> that's breakable, if there is one.
4361 If C<$from> is greater than C<$to>, the search goes I<backwards>, finding the
4362 first line I<before> C<$to> that's breakable, if there is one.
4366 sub breakable_line {
4368 my ( $from, $to ) = @_;
4370 # $i is the start point. (Where are the FORTRAN programs of yesteryear?)
4373 # If there are at least 2 arguments, we're trying to search a range.
4376 # $delta is positive for a forward search, negative for a backward one.
4377 my $delta = $from < $to ? +1 : -1;
4379 # Keep us from running off the ends of the file.
4380 my $limit = $delta > 0 ? $#dbline : 1;
4382 # Clever test. If you're a mathematician, it's obvious why this
4383 # test works. If not:
4384 # If $delta is positive (going forward), $limit will be $#dbline.
4385 # If $to is less than $limit, ($limit - $to) will be positive, times
4386 # $delta of 1 (positive), so the result is > 0 and we should use $to
4387 # as the stopping point.
4389 # If $to is greater than $limit, ($limit - $to) is negative,
4390 # times $delta of 1 (positive), so the result is < 0 and we should
4391 # use $limit ($#dbline) as the stopping point.
4393 # If $delta is negative (going backward), $limit will be 1.
4394 # If $to is zero, ($limit - $to) will be 1, times $delta of -1
4395 # (negative) so the result is > 0, and we use $to as the stopping
4398 # If $to is less than zero, ($limit - $to) will be positive,
4399 # times $delta of -1 (negative), so the result is not > 0, and
4400 # we use $limit (1) as the stopping point.
4402 # If $to is 1, ($limit - $to) will zero, times $delta of -1
4403 # (negative), still giving zero; the result is not > 0, and
4404 # we use $limit (1) as the stopping point.
4406 # if $to is >1, ($limit - $to) will be negative, times $delta of -1
4407 # (negative), giving a positive (>0) value, so we'll set $limit to
4410 $limit = $to if ( $limit - $to ) * $delta > 0;
4412 # The real search loop.
4413 # $i starts at $from (the point we want to start searching from).
4414 # We move through @dbline in the appropriate direction (determined
4415 # by $delta: either -1 (back) or +1 (ahead).
4416 # We stay in as long as we haven't hit an executable line
4417 # ($dbline[$i] == 0 means not executable) and we haven't reached
4418 # the limit yet (test similar to the above).
4419 $i += $delta while $dbline[$i] == 0 and ( $limit - $i ) * $delta > 0;
4421 } ## end if (@_ >= 2)
4423 # If $i points to a line that is executable, return that.
4424 return $i unless $dbline[$i] == 0;
4426 # Format the message and print it: no breakable lines in range.
4427 my ( $pl, $upto ) = ( '', '' );
4428 ( $pl, $upto ) = ( 's', "..$to" ) if @_ >= 2 and $from != $to;
4430 # If there's a filename in filename_error, we'll see it.
4432 die "Line$pl $from$upto$filename_error not breakable\n";
4433 } ## end sub breakable_line
4435 =head3 breakable_line_in_filename(file, from, to) (API)
4437 Like C<breakable_line>, but look in another file.
4441 sub breakable_line_in_filename {
4443 # Capture the file name.
4446 # Swap the magic line array over there temporarily.
4447 local *dbline = $main::{ '_<' . $f };
4449 # If there's an error, it's in this other file.
4450 local $filename_error = " of '$f'";
4452 # Find the breakable line.
4455 # *dbline and $filename_error get restored when this block ends.
4457 } ## end sub breakable_line_in_filename
4459 =head3 break_on_line(lineno, [condition]) (API)
4461 Adds a breakpoint with the specified condition (or 1 if no condition was
4462 specified) to the specified line. Dies if it can't.
4467 my ( $i, $cond ) = @_;
4469 # Always true if no condition supplied.
4470 $cond = 1 unless @_ >= 2;
4476 # Woops, not a breakable line. $filename_error allows us to say
4477 # if it was in a different file.
4478 die "Line $i$filename_error not breakable.\n" if $dbline[$i] == 0;
4480 # Mark this file as having breakpoints in it.
4481 $had_breakpoints{$filename} |= 1;
4483 # If there is an action or condition here already ...
4484 if ( $dbline{$i} ) {
4486 # ... swap this condition for the existing one.
4487 $dbline{$i} =~ s/^[^\0]*/$cond/;
4491 # Nothing here - just add the condition.
4492 $dbline{$i} = $cond;
4494 _set_breakpoint_enabled_status($filename, $i, 1);
4496 } ## end sub break_on_line
4498 =head3 cmd_b_line(line, [condition]) (command)
4500 Wrapper for C<break_on_line>. Prints the failure message if it
4506 eval { break_on_line(@_); 1 } or do {
4508 print $OUT $@ and return;
4510 } ## end sub cmd_b_line
4512 =head3 cmd_b_filename_line(line, [condition]) (command)
4514 Wrapper for C<break_on_filename_line>. Prints the failure message if it
4519 sub cmd_b_filename_line {
4520 eval { break_on_filename_line(@_); 1 } or do {
4522 print $OUT $@ and return;
4526 =head3 break_on_filename_line(file, line, [condition]) (API)
4528 Switches to the file specified and then calls C<break_on_line> to set
4533 sub break_on_filename_line {
4534 my ( $f, $i, $cond ) = @_;
4536 # Always true if condition left off.
4537 $cond = 1 unless @_ >= 3;
4539 # Switch the magical hash temporarily.
4540 local *dbline = $main::{ '_<' . $f };
4542 # Localize the variables that break_on_line uses to make its message.
4543 local $filename_error = " of '$f'";
4544 local $filename = $f;
4546 # Add the breakpoint.
4547 break_on_line( $i, $cond );
4548 } ## end sub break_on_filename_line
4550 =head3 break_on_filename_line_range(file, from, to, [condition]) (API)
4552 Switch to another file, search the range of lines specified for an
4553 executable one, and put a breakpoint on the first one you find.
4557 sub break_on_filename_line_range {
4558 my ( $f, $from, $to, $cond ) = @_;
4560 # Find a breakable line if there is one.
4561 my $i = breakable_line_in_filename( $f, $from, $to );
4563 # Always true if missing.
4564 $cond = 1 unless @_ >= 3;
4566 # Add the breakpoint.
4567 break_on_filename_line( $f, $i, $cond );
4568 } ## end sub break_on_filename_line_range
4570 =head3 subroutine_filename_lines(subname, [condition]) (API)
4572 Search for a subroutine within a given file. The condition is ignored.
4573 Uses C<find_sub> to locate the desired subroutine.
4577 sub subroutine_filename_lines {
4578 my ( $subname, $cond ) = @_;
4580 # Returned value from find_sub() is fullpathname:startline-endline.
4581 # The match creates the list (fullpathname, start, end). Falling off
4582 # the end of the subroutine returns this implicitly.
4583 find_sub($subname) =~ /^(.*):(\d+)-(\d+)$/;
4584 } ## end sub subroutine_filename_lines
4586 =head3 break_subroutine(subname) (API)
4588 Places a break on the first line possible in the specified subroutine. Uses
4589 C<subroutine_filename_lines> to find the subroutine, and
4590 C<break_on_filename_line_range> to place the break.
4594 sub break_subroutine {
4595 my $subname = shift;
4597 # Get filename, start, and end.
4598 my ( $file, $s, $e ) = subroutine_filename_lines($subname)
4599 or die "Subroutine $subname not found.\n";
4601 # Null condition changes to '1' (always true).
4602 $cond = 1 unless @_ >= 2;
4604 # Put a break the first place possible in the range of lines
4605 # that make up this subroutine.
4606 break_on_filename_line_range( $file, $s, $e, @_ );
4607 } ## end sub break_subroutine
4609 =head3 cmd_b_sub(subname, [condition]) (command)
4611 We take the incoming subroutine name and fully-qualify it as best we can.
4615 =item 1. If it's already fully-qualified, leave it alone.
4617 =item 2. Try putting it in the current package.
4619 =item 3. If it's not there, try putting it in CORE::GLOBAL if it exists there.
4621 =item 4. If it starts with '::', put it in 'main::'.
4625 After all this cleanup, we call C<break_subroutine> to try to set the
4631 my ( $subname, $cond ) = @_;
4633 # Add always-true condition if we have none.
4634 $cond = 1 unless @_ >= 2;
4636 # If the subname isn't a code reference, qualify it so that
4637 # break_subroutine() will work right.
4638 unless ( ref $subname eq 'CODE' ) {
4641 $subname =~ s/\'/::/g;
4644 # Put it in this package unless it's already qualified.
4645 $subname = "${'package'}::" . $subname
4646 unless $subname =~ /::/;
4648 # Requalify it into CORE::GLOBAL if qualifying it into this
4649 # package resulted in its not being defined, but only do so
4650 # if it really is in CORE::GLOBAL.
4651 $subname = "CORE::GLOBAL::$s"
4652 if not defined &$subname
4654 and defined &{"CORE::GLOBAL::$s"};
4656 # Put it in package 'main' if it has a leading ::.
4657 $subname = "main" . $subname if substr( $subname, 0, 2 ) eq "::";
4659 } ## end unless (ref $subname eq 'CODE')
4661 # Try to set the breakpoint.
4662 eval { break_subroutine( $subname, $cond ); 1 } or do {
4664 print $OUT $@ and return;
4666 } ## end sub cmd_b_sub
4668 =head3 C<cmd_B> - delete breakpoint(s) (command)
4670 The command mostly parses the command line and tries to turn the argument
4671 into a line spec. If it can't, it uses the current line. It then calls
4672 C<delete_breakpoint> to actually do the work.
4674 If C<*> is specified, C<cmd_B> calls C<delete_breakpoint> with no arguments,
4675 thereby deleting all the breakpoints.
4682 # No line spec? Use dbline.
4683 # If there is one, use it if it's non-zero, or wipe it out if it is.
4684 my $line = ( $_[0] =~ /^\./ ) ? $dbline : shift || '';
4687 # If the line was dot, make the line the current one.
4688 $line =~ s/^\./$dbline/;
4690 # If it's * we're deleting all the breakpoints.
4691 if ( $line eq '*' ) {
4692 eval { &delete_breakpoint(); 1 } or print $OUT $@ and return;
4695 # If there is a line spec, delete the breakpoint on that line.
4696 elsif ( $line =~ /^(\S.*)/ ) {
4697 eval { &delete_breakpoint( $line || $dbline ); 1 } or do {
4699 print $OUT $@ and return;
4701 } ## end elsif ($line =~ /^(\S.*)/)
4706 "Deleting a breakpoint requires a line number, or '*' for all\n"
4711 =head3 delete_breakpoint([line]) (API)
4713 This actually does the work of deleting either a single breakpoint, or all
4716 For a single line, we look for it in C<@dbline>. If it's nonbreakable, we
4717 just drop out with a message saying so. If it is, we remove the condition
4718 part of the 'condition\0action' that says there's a breakpoint here. If,
4719 after we've done that, there's nothing left, we delete the corresponding
4720 line in C<%dbline> to signal that no action needs to be taken for this line.
4722 For all breakpoints, we iterate through the keys of C<%had_breakpoints>,
4723 which lists all currently-loaded files which have breakpoints. We then look
4724 at each line in each of these files, temporarily switching the C<%dbline>
4725 and C<@dbline> structures to point to the files in question, and do what
4726 we did in the single line case: delete the condition in C<@dbline>, and
4727 delete the key in C<%dbline> if nothing's left.
4729 We then wholesale delete C<%postponed>, C<%postponed_file>, and
4730 C<%break_on_load>, because these structures contain breakpoints for files
4731 and code that haven't been loaded yet. We can just kill these off because there
4732 are no magical debugger structures associated with them.
4736 sub delete_breakpoint {
4741 # If we got a line, delete just that one.
4742 if ( defined($i) ) {
4744 # Woops. This line wasn't breakable at all.
4745 die "Line $i not breakable.\n" if $dbline[$i] == 0;
4747 # Kill the condition, but leave any action.
4748 $dbline{$i} =~ s/^[^\0]*//;
4750 # Remove the entry entirely if there's no action left.
4751 if ($dbline{$i} eq '') {
4753 _delete_breakpoint_data_ref($fn, $i);
4757 # No line; delete them all.
4759 print $OUT "Deleting all breakpoints...\n";
4761 # %had_breakpoints lists every file that had at least one
4763 for my $file ( keys %had_breakpoints ) {
4765 # Switch to the desired file temporarily.
4766 local *dbline = $main::{ '_<' . $file };
4771 # For all lines in this file ...
4772 for ( $i = 1 ; $i <= $max ; $i++ ) {
4774 # If there's a breakpoint or action on this line ...
4775 if ( defined $dbline{$i} ) {
4777 # ... remove the breakpoint.
4778 $dbline{$i} =~ s/^[^\0]+//;
4779 if ( $dbline{$i} =~ s/^\0?$// ) {
4781 # Remove the entry altogether if no action is there.
4783 _delete_breakpoint_data_ref($file, $i);
4785 } ## end if (defined $dbline{$i...
4786 } ## end for ($i = 1 ; $i <= $max...
4788 # If, after we turn off the "there were breakpoints in this file"
4789 # bit, the entry in %had_breakpoints for this file is zero,
4790 # we should remove this file from the hash.
4791 if ( not $had_breakpoints{$file} &= ~1 ) {
4792 delete $had_breakpoints{$file};
4794 } ## end for my $file (keys %had_breakpoints)
4796 # Kill off all the other breakpoints that are waiting for files that
4797 # haven't been loaded yet.
4799 undef %postponed_file;
4800 undef %break_on_load;
4801 } ## end else [ if (defined($i))
4802 } ## end sub delete_breakpoint
4804 =head3 cmd_stop (command)
4806 This is meant to be part of the new command API, but it isn't called or used
4807 anywhere else in the debugger. XXX It is probably meant for use in development
4812 sub cmd_stop { # As on ^C, but not signal-safy.
4816 =head3 C<cmd_e> - threads
4818 Display the current thread id:
4822 This could be how (when implemented) to send commands to this thread id (e cmd)
4823 or that thread id (e tid cmd).
4830 unless (exists($INC{'threads.pm'})) {
4831 print "threads not loaded($ENV{PERL5DB_THREADED})
4832 please run the debugger with PERL5DB_THREADED=1 set in the environment\n";
4834 my $tid = threads->tid;
4835 print "thread id: $tid\n";
4839 =head3 C<cmd_E> - list of thread ids
4841 Display the list of available thread ids:
4845 This could be used (when implemented) to send commands to all threads (E cmd).
4852 unless (exists($INC{'threads.pm'})) {
4853 print "threads not loaded($ENV{PERL5DB_THREADED})
4854 please run the debugger with PERL5DB_THREADED=1 set in the environment\n";
4856 my $tid = threads->tid;
4857 print "thread ids: ".join(', ',
4858 map { ($tid == $_->tid ? '<'.$_->tid.'>' : $_->tid) } threads->list
4863 =head3 C<cmd_h> - help command (command)
4865 Does the work of either
4871 Showing all the debugger help
4875 Showing help for a specific command
4884 # If we have no operand, assume null.
4885 my $line = shift || '';
4887 # 'h h'. Print the long-format help.
4888 if ( $line =~ /^h\s*/ ) {
4892 # 'h <something>'. Search for the command and print only its help.
4893 elsif ( $line =~ /^(\S.*)$/ ) {
4895 # support long commands; otherwise bogus errors
4896 # happen when you ask for h on <CR> for example
4897 my $asked = $1; # the command requested
4898 # (for proper error message)
4900 my $qasked = quotemeta($asked); # for searching; we don't
4901 # want to use it as a pattern.
4902 # XXX: finds CR but not <CR>
4904 # Search the help string for the command.
4906 $help =~ /^ # Start of a line
4908 (?:[IB]<) # Optional markup
4909 $qasked # The requested command
4914 # It's there; pull it out and print it.
4918 (?:[IB]<) # Optional markup
4919 $qasked # The command
4920 ([\s\S]*?) # Description line(s)
4921 \n) # End of last description line
4922 (?!\s) # Next line not starting with
4931 # Not found; not a debugger command.
4933 print_help("B<$asked> is not a debugger command.\n");
4935 } ## end elsif ($line =~ /^(\S.*)$/)
4937 # 'h' - print the summary help.
4939 print_help($summary);
4943 =head3 C<cmd_i> - inheritance display
4945 Display the (nested) parentage of the module or object given.
4952 foreach my $isa ( split( /\s+/, $line ) ) {
4961 defined( ${"$_\::VERSION"} )
4962 ? ' ' . ${"$_\::VERSION"}
4964 } @{mro::get_linear_isa(ref($isa) || $isa)}
4970 =head3 C<cmd_l> - list lines (command)
4972 Most of the command is taken up with transforming all the different line
4973 specification syntaxes into 'start-stop'. After that is done, the command
4974 runs a loop over C<@dbline> for the specified range of lines. It handles
4975 the printing of each line and any markers (C<==E<gt>> for current line,
4976 C<b> for break on this line, C<a> for action on this line, C<:> for this
4979 We save the last line listed in the C<$start> global for further listing
4985 my $current_line = $line;
4989 # If this is '-something', delete any spaces after the dash.
4990 $line =~ s/^-\s*$/-/;
4992 # If the line is '$something', assume this is a scalar containing a
4994 if ( $line =~ /^(\$.*)/s ) {
4996 # Set up for DB::eval() - evaluate in *user* context.
5001 # Ooops. Bad scalar.
5002 print( $OUT "Error: $@\n" ), next CMD if $@;
5004 # Good scalar. If it's a reference, find what it points to.
5006 print( $OUT "Interpreted as: $1 $s\n" );
5009 # Call self recursively to really do the command.
5011 } ## end if ($line =~ /^(\$.*)/s)
5013 # l name. Try to find a sub by that name.
5014 elsif ( $line =~ /^([\':A-Za-z_][\':\w]*(\[.*\])?)/s ) {
5015 my $s = $subname = $1;
5018 $subname =~ s/\'/::/;
5020 # Put it in this package unless it starts with ::.
5021 $subname = $package . "::" . $subname unless $subname =~ /::/;
5023 # Put it in CORE::GLOBAL if t doesn't start with :: and
5024 # it doesn't live in this package and it lives in CORE::GLOBAL.
5025 $subname = "CORE::GLOBAL::$s"
5026 if not defined &$subname
5028 and defined &{"CORE::GLOBAL::$s"};
5030 # Put leading '::' names into 'main::'.
5031 $subname = "main" . $subname if substr( $subname, 0, 2 ) eq "::";
5033 # Get name:start-stop from find_sub, and break this up at
5035 @pieces = split( /:/, find_sub($subname) || $sub{$subname} );
5037 # Pull off start-stop.
5038 $subrange = pop @pieces;
5040 # If the name contained colons, the split broke it up.
5041 # Put it back together.
5042 $file = join( ':', @pieces );
5044 # If we're not in that file, switch over to it.
5045 if ( $file ne $filename ) {
5046 print $OUT "Switching to file '$file'.\n"
5047 unless $slave_editor;
5049 # Switch debugger's magic structures.
5050 *dbline = $main::{ '_<' . $file };
5053 } ## end if ($file ne $filename)
5055 # Subrange is 'start-stop'. If this is less than a window full,
5056 # swap it to 'start+', which will list a window from the start point.
5058 if ( eval($subrange) < -$window ) {
5059 $subrange =~ s/-.*/+/;
5062 # Call self recursively to list the range.
5064 &cmd_l( 'l', $subrange );
5065 } ## end if ($subrange)
5069 print $OUT "Subroutine $subname not found.\n";
5071 } ## end elsif ($line =~ /^([\':A-Za-z_][\':\w]*(\[.*\])?)/s)
5074 elsif ( $line =~ /^\s*$/ ) {
5076 # Compute new range to list.
5077 $incr = $window - 1;
5078 $line = $start . '-' . ( $start + $incr );
5081 &cmd_l( 'l', $line );
5084 # l [start]+number_of_lines
5085 elsif ( $line =~ /^(\d*)\+(\d*)$/ ) {
5087 # Don't reset start for 'l +nnn'.
5090 # Increment for list. Use window size if not specified.
5091 # (Allows 'l +' to work.)
5093 $incr = $window - 1 unless $incr;
5095 # Create a line range we'll understand, and recurse to do it.
5096 $line = $start . '-' . ( $start + $incr );
5097 &cmd_l( 'l', $line );
5098 } ## end elsif ($line =~ /^(\d*)\+(\d*)$/)
5100 # l start-stop or l start,stop
5101 elsif ( $line =~ /^((-?[\d\$\.]+)([-,]([\d\$\.]+))?)?/ ) {
5103 # Determine end point; use end of file if not specified.
5104 $end = ( !defined $2 ) ? $max : ( $4 ? $4 : $2 );
5106 # Go on to the end, and then stop.
5107 $end = $max if $end > $max;
5109 # Determine start line.
5111 $i = $line if $i eq '.';
5115 # If we're running under a slave editor, force it to show the lines.
5116 if ($slave_editor) {
5117 print $OUT "\032\032$filename:$i:0\n";
5121 # We're doing it ourselves. We want to show the line and special
5123 # - the current line in execution
5124 # - whether a line is breakable or not
5125 # - whether a line has a break or not
5126 # - whether a line has an action or not
5128 for ( ; $i <= $end ; $i++ ) {
5130 # Check for breakpoints and actions.
5131 my ( $stop, $action );
5132 ( $stop, $action ) = split( /\0/, $dbline{$i} )
5135 # ==> if this is the current line in execution,
5136 # : if it's breakable.
5138 ( $i == $current_line and $filename eq $filename_ini )
5140 : ( $dbline[$i] + 0 ? ':' : ' ' );
5142 # Add break and action indicators.
5143 $arrow .= 'b' if $stop;
5144 $arrow .= 'a' if $action;
5147 print $OUT "$i$arrow\t", $dbline[$i];
5149 # Move on to the next line. Drop out on an interrupt.
5150 $i++, last if $signal;
5151 } ## end for (; $i <= $end ; $i++)
5153 # Line the prompt up; print a newline if the last line listed
5154 # didn't have a newline.
5155 print $OUT "\n" unless $dbline[ $i - 1 ] =~ /\n$/;
5156 } ## end else [ if ($slave_editor)
5158 # Save the point we last listed to in case another relative 'l'
5159 # command is desired. Don't let it run off the end.
5161 $start = $max if $start > $max;
5162 } ## end elsif ($line =~ /^((-?[\d\$\.]+)([-,]([\d\$\.]+))?)?/)
5165 =head3 C<cmd_L> - list breakpoints, actions, and watch expressions (command)
5167 To list breakpoints, the command has to look determine where all of them are
5168 first. It starts a C<%had_breakpoints>, which tells us what all files have
5169 breakpoints and/or actions. For each file, we switch the C<*dbline> glob (the
5170 magic source and breakpoint data structures) to the file, and then look
5171 through C<%dbline> for lines with breakpoints and/or actions, listing them
5172 out. We look through C<%postponed> not-yet-compiled subroutines that have
5173 breakpoints, and through C<%postponed_file> for not-yet-C<require>'d files
5174 that have breakpoints.
5176 Watchpoints are simpler: we just list the entries in C<@to_watch>.
5183 # If no argument, list everything. Pre-5.8.0 version always lists
5185 my $arg = shift || 'abw';
5186 $arg = 'abw' unless $CommandSet eq '580'; # sigh...
5188 # See what is wanted.
5189 my $action_wanted = ( $arg =~ /a/ ) ? 1 : 0;
5190 my $break_wanted = ( $arg =~ /b/ ) ? 1 : 0;
5191 my $watch_wanted = ( $arg =~ /w/ ) ? 1 : 0;
5193 # Breaks and actions are found together, so we look in the same place
5195 if ( $break_wanted or $action_wanted ) {
5197 # Look in all the files with breakpoints...
5198 for my $file ( keys %had_breakpoints ) {
5200 # Temporary switch to this file.
5201 local *dbline = $main::{ '_<' . $file };
5203 # Set up to look through the whole file.
5205 my $was; # Flag: did we print something
5208 # For each line in the file ...
5209 for ( $i = 1 ; $i <= $max ; $i++ ) {
5211 # We've got something on this line.
5212 if ( defined $dbline{$i} ) {
5214 # Print the header if we haven't.
5215 print $OUT "$file:\n" unless $was++;
5218 print $OUT " $i:\t", $dbline[$i];
5220 # Pull out the condition and the action.
5221 ( $stop, $action ) = split( /\0/, $dbline{$i} );
5223 # Print the break if there is one and it's wanted.
5224 print $OUT " break if (", $stop, ")\n"
5228 # Print the action if there is one and it's wanted.
5229 print $OUT " action: ", $action, "\n"
5233 # Quit if the user hit interrupt.
5235 } ## end if (defined $dbline{$i...
5236 } ## end for ($i = 1 ; $i <= $max...
5237 } ## end for my $file (keys %had_breakpoints)
5238 } ## end if ($break_wanted or $action_wanted)
5240 # Look for breaks in not-yet-compiled subs:
5241 if ( %postponed and $break_wanted ) {
5242 print $OUT "Postponed breakpoints in subroutines:\n";
5244 for $subname ( keys %postponed ) {
5245 print $OUT " $subname\t$postponed{$subname}\n";
5248 } ## end if (%postponed and $break_wanted)
5250 # Find files that have not-yet-loaded breaks:
5251 my @have = map { # Combined keys
5252 keys %{ $postponed_file{$_} }
5253 } keys %postponed_file;
5255 # If there are any, list them.
5256 if ( @have and ( $break_wanted or $action_wanted ) ) {
5257 print $OUT "Postponed breakpoints in files:\n";
5258 my ( $file, $line );
5260 for $file ( keys %postponed_file ) {
5261 my $db = $postponed_file{$file};
5262 print $OUT " $file:\n";
5263 for $line ( sort { $a <=> $b } keys %$db ) {
5264 print $OUT " $line:\n";
5265 my ( $stop, $action ) = split( /\0/, $$db{$line} );
5266 print $OUT " break if (", $stop, ")\n"
5269 print $OUT " action: ", $action, "\n"
5273 } ## end for $line (sort { $a <=>...
5275 } ## end for $file (keys %postponed_file)
5276 } ## end if (@have and ($break_wanted...
5277 if ( %break_on_load and $break_wanted ) {
5278 print $OUT "Breakpoints on load:\n";
5280 for $file ( keys %break_on_load ) {
5281 print $OUT " $file\n";
5284 } ## end if (%break_on_load and...
5285 if ($watch_wanted) {
5287 print $OUT "Watch-expressions:\n" if @to_watch;
5288 for my $expr (@to_watch) {
5289 print $OUT " $expr\n";
5292 } ## end if ($trace & 2)
5293 } ## end if ($watch_wanted)
5296 =head3 C<cmd_M> - list modules (command)
5298 Just call C<list_modules>.
5306 =head3 C<cmd_o> - options (command)
5308 If this is just C<o> by itself, we list the current settings via
5309 C<dump_option>. If there's a nonblank value following it, we pass that on to
5310 C<parse_options> for processing.
5316 my $opt = shift || ''; # opt[=val]
5318 # Nonblank. Try to parse and process.
5319 if ( $opt =~ /^(\S.*)/ ) {
5323 # Blank. List the current option settings.
5331 =head3 C<cmd_O> - nonexistent in 5.8.x (command)
5333 Advises the user that the O command has been renamed.
5338 print $OUT "The old O command is now the o command.\n"; # hint
5339 print $OUT "Use 'h' to get current command help synopsis or\n"; #
5340 print $OUT "use 'o CommandSet=pre580' to revert to old usage\n"; #
5343 =head3 C<cmd_v> - view window (command)
5345 Uses the C<$preview> variable set in the second C<BEGIN> block (q.v.) to
5346 move back a few lines to list the selected line in context. Uses C<cmd_l>
5347 to do the actual listing after figuring out the range of line to request.
5355 # Extract the line to list around. (Astute readers will have noted that
5356 # this pattern will match whether or not a numeric line is specified,
5357 # which means that we'll always enter this loop (though a non-numeric
5358 # argument results in no action at all)).
5359 if ( $line =~ /^(\d*)$/ ) {
5361 # Total number of lines to list (a windowful).
5362 $incr = $window - 1;
5364 # Set the start to the argument given (if there was one).
5367 # Back up by the context amount.
5370 # Put together a linespec that cmd_l will like.
5371 $line = $start . '-' . ( $start + $incr );
5374 &cmd_l( 'l', $line );
5375 } ## end if ($line =~ /^(\d*)$/)
5378 =head3 C<cmd_w> - add a watch expression (command)
5380 The 5.8 version of this command adds a watch expression if one is specified;
5381 it does nothing if entered with no operands.
5383 We extract the expression, save it, evaluate it in the user's context, and
5384 save the value. We'll re-evaluate it each time the debugger passes a line,
5385 and will stop (see the code at the top of the command loop) if the value
5386 of any of the expressions changes.
5393 # Null expression if no arguments.
5394 my $expr = shift || '';
5396 # If expression is not null ...
5397 if ( $expr =~ /^(\S.*)/ ) {
5400 push @to_watch, $expr;
5402 # Parameterize DB::eval and call it to get the expression's value
5403 # in the user's context. This version can handle expressions which
5404 # return a list value.
5406 my ($val) = join( ' ', &eval );
5407 $val = ( defined $val ) ? "'$val'" : 'undef';
5409 # Save the current value of the expression.
5410 push @old_watch, $val;
5412 # We are now watching expressions.
5414 } ## end if ($expr =~ /^(\S.*)/)
5416 # You have to give one to get one.
5418 print $OUT "Adding a watch-expression requires an expression\n"; # hint
5422 =head3 C<cmd_W> - delete watch expressions (command)
5424 This command accepts either a watch expression to be removed from the list
5425 of watch expressions, or C<*> to delete them all.
5427 If C<*> is specified, we simply empty the watch expression list and the
5428 watch expression value list. We also turn off the bit that says we've got
5431 If an expression (or partial expression) is specified, we pattern-match
5432 through the expressions and remove the ones that match. We also discard
5433 the corresponding values. If no watch expressions are left, we turn off
5434 the I<watching expressions> bit.
5440 my $expr = shift || '';
5443 if ( $expr eq '*' ) {
5448 print $OUT "Deleting all watch expressions ...\n";
5451 @to_watch = @old_watch = ();
5454 # Delete one of them.
5455 elsif ( $expr =~ /^(\S.*)/ ) {
5457 # Where we are in the list.
5460 # For each expression ...
5461 foreach (@to_watch) {
5462 my $val = $to_watch[$i_cnt];
5464 # Does this one match the command argument?
5465 if ( $val eq $expr ) { # =~ m/^\Q$i$/) {
5466 # Yes. Turn it off, and its value too.
5467 splice( @to_watch, $i_cnt, 1 );
5468 splice( @old_watch, $i_cnt, 1 );
5471 } ## end foreach (@to_watch)
5473 # We don't bother to turn watching off because
5474 # a) we don't want to stop calling watchfunction() it it exists
5475 # b) foreach over a null list doesn't do anything anyway
5477 } ## end elsif ($expr =~ /^(\S.*)/)
5479 # No command arguments entered.
5482 "Deleting a watch-expression requires an expression, or '*' for all\n"
5487 ### END of the API section
5489 =head1 SUPPORT ROUTINES
5491 These are general support routines that are used in a number of places
5492 throughout the debugger.
5496 save() saves the user's versions of globals that would mess us up in C<@saved>,
5497 and installs the versions we like better.
5503 # Save eval failure, command failure, extended OS error, output field
5504 # separator, input record separator, output record separator and
5505 # the warning setting.
5506 @saved = ( $@, $!, $^E, $,, $/, $\, $^W );
5508 $, = ""; # output field separator is null string
5509 $/ = "\n"; # input record separator is newline
5510 $\ = ""; # output record separator is null string
5511 $^W = 0; # warnings are off
5514 =head2 C<print_lineinfo> - show where we are now
5516 print_lineinfo prints whatever it is that it is handed; it prints it to the
5517 C<$LINEINFO> filehandle instead of just printing it to STDOUT. This allows
5518 us to feed line information to a slave editor without messing up the
5523 sub print_lineinfo {
5525 # Make the terminal sensible if we're not the primary debugger.
5526 resetterm(1) if $LINEINFO eq $OUT and $term_pid != $$;
5530 } ## end sub print_lineinfo
5532 =head2 C<postponed_sub>
5534 Handles setting postponed breakpoints in subroutines once they're compiled.
5535 For breakpoints, we use C<DB::find_sub> to locate the source file and line
5536 range for the subroutine, then mark the file as having a breakpoint,
5537 temporarily switch the C<*dbline> glob over to the source file, and then
5538 search the given range of lines to find a breakable line. If we find one,
5539 we set the breakpoint on it, deleting the breakpoint from C<%postponed>.
5543 # The following takes its argument via $evalarg to preserve current @_
5547 # Get the subroutine name.
5548 my $subname = shift;
5550 # If this is a 'break +<n> if <condition>' ...
5551 if ( $postponed{$subname} =~ s/^break\s([+-]?\d+)\s+if\s// ) {
5553 # If there's no offset, use '+0'.
5554 my $offset = $1 || 0;
5556 # find_sub's value is 'fullpath-filename:start-stop'. It's
5557 # possible that the filename might have colons in it too.
5558 my ( $file, $i ) = ( find_sub($subname) =~ /^(.*):(\d+)-.*$/ );
5561 # We got the start line. Add the offset '+<n>' from
5562 # $postponed{subname}.
5565 # Switch to the file this sub is in, temporarily.
5566 local *dbline = $main::{ '_<' . $file };
5568 # No warnings, please.
5569 local $^W = 0; # != 0 is magical below
5571 # This file's got a breakpoint in it.
5572 $had_breakpoints{$file} |= 1;
5574 # Last line in file.
5577 # Search forward until we hit a breakable line or get to
5578 # the end of the file.
5579 ++$i until $dbline[$i] != 0 or $i >= $max;
5581 # Copy the breakpoint in and delete it from %postponed.
5582 $dbline{$i} = delete $postponed{$subname};
5585 # find_sub didn't find the sub.
5588 print $OUT "Subroutine $subname not found.\n";
5591 } ## end if ($postponed{$subname...
5592 elsif ( $postponed{$subname} eq 'compile' ) { $signal = 1 }
5594 #print $OUT "In postponed_sub for '$subname'.\n";
5595 } ## end sub postponed_sub
5599 Called after each required file is compiled, but before it is executed;
5600 also called if the name of a just-compiled subroutine is a key of
5601 C<%postponed>. Propagates saved breakpoints (from C<b compile>, C<b load>,
5602 etc.) into the just-compiled code.
5604 If this is a C<require>'d file, the incoming parameter is the glob
5605 C<*{"_<$filename"}>, with C<$filename> the name of the C<require>'d file.
5607 If it's a subroutine, the incoming parameter is the subroutine name.
5613 # If there's a break, process it.
5614 if ($ImmediateStop) {
5616 # Right, we've stopped. Turn it off.
5619 # Enter the command loop when DB::DB gets called.
5623 # If this is a subroutine, let postponed_sub() deal with it.
5624 return &postponed_sub unless ref \$_[0] eq 'GLOB';
5626 # Not a subroutine. Deal with the file.
5627 local *dbline = shift;
5628 my $filename = $dbline;
5629 $filename =~ s/^_<//;
5631 $signal = 1, print $OUT "'$filename' loaded...\n"
5632 if $break_on_load{$filename};
5633 print_lineinfo( ' ' x $stack_depth, "Package $filename.\n" ) if $frame;
5635 # Do we have any breakpoints to put in this file?
5636 return unless $postponed_file{$filename};
5638 # Yes. Mark this file as having breakpoints.
5639 $had_breakpoints{$filename} |= 1;
5641 # "Cannot be done: insufficient magic" - we can't just put the
5642 # breakpoints saved in %postponed_file into %dbline by assigning
5643 # the whole hash; we have to do it one item at a time for the
5644 # breakpoints to be set properly.
5645 #%dbline = %{$postponed_file{$filename}};
5647 # Set the breakpoints, one at a time.
5650 for $key ( keys %{ $postponed_file{$filename} } ) {
5652 # Stash the saved breakpoint into the current file's magic line array.
5653 $dbline{$key} = ${ $postponed_file{$filename} }{$key};
5656 # This file's been compiled; discard the stored breakpoints.
5657 delete $postponed_file{$filename};
5659 } ## end sub postponed
5663 C<dumpit> is the debugger's wrapper around dumpvar.pl.
5665 It gets a filehandle (to which C<dumpvar.pl>'s output will be directed) and
5666 a reference to a variable (the thing to be dumped) as its input.
5668 The incoming filehandle is selected for output (C<dumpvar.pl> is printing to
5669 the currently-selected filehandle, thank you very much). The current
5670 values of the package globals C<$single> and C<$trace> are backed up in
5671 lexicals, and they are turned off (this keeps the debugger from trying
5672 to single-step through C<dumpvar.pl> (I think.)). C<$frame> is localized to
5673 preserve its current value and it is set to zero to prevent entry/exit
5674 messages from printing, and C<$doret> is localized as well and set to -2 to
5675 prevent return values from being shown.
5677 C<dumpit()> then checks to see if it needs to load C<dumpvar.pl> and
5678 tries to load it (note: if you have a C<dumpvar.pl> ahead of the
5679 installed version in C<@INC>, yours will be used instead. Possible security
5682 It then checks to see if the subroutine C<main::dumpValue> is now defined
5683 (it should have been defined by C<dumpvar.pl>). If it has, C<dumpit()>
5684 localizes the globals necessary for things to be sane when C<main::dumpValue()>
5685 is called, and picks up the variable to be dumped from the parameter list.
5687 It checks the package global C<%options> to see if there's a C<dumpDepth>
5688 specified. If not, -1 is assumed; if so, the supplied value gets passed on to
5689 C<dumpvar.pl>. This tells C<dumpvar.pl> where to leave off when dumping a
5690 structure: -1 means dump everything.
5692 C<dumpValue()> is then called if possible; if not, C<dumpit()>just prints a
5695 In either case, C<$single>, C<$trace>, C<$frame>, and C<$doret> are restored
5696 and we then return to the caller.
5702 # Save the current output filehandle and switch to the one
5703 # passed in as the first parameter.
5704 local ($savout) = select(shift);
5706 # Save current settings of $single and $trace, and then turn them off.
5707 my $osingle = $single;
5708 my $otrace = $trace;
5709 $single = $trace = 0;
5711 # XXX Okay, what do $frame and $doret do, again?
5715 # Load dumpvar.pl unless we've already got the sub we need from it.
5716 unless ( defined &main::dumpValue ) {
5717 do 'dumpvar.pl' or die $@;
5720 # If the load succeeded (or we already had dumpvalue()), go ahead
5722 if ( defined &main::dumpValue ) {
5727 my $maxdepth = shift || $option{dumpDepth};
5728 $maxdepth = -1 unless defined $maxdepth; # -1 means infinite depth
5729 &main::dumpValue( $v, $maxdepth );
5730 } ## end if (defined &main::dumpValue)
5732 # Oops, couldn't load dumpvar.pl.
5735 print $OUT "dumpvar.pl not available.\n";
5738 # Reset $single and $trace to their old values.
5742 # Restore the old filehandle.
5746 =head2 C<print_trace>
5748 C<print_trace>'s job is to print a stack trace. It does this via the
5749 C<dump_trace> routine, which actually does all the ferreting-out of the
5750 stack trace data. C<print_trace> takes care of formatting it nicely and
5751 printing it to the proper filehandle.
5759 The filehandle to print to.
5763 How many frames to skip before starting trace.
5767 How many frames to print.
5771 A flag: if true, print a I<short> trace without filenames, line numbers, or arguments
5775 The original comment below seems to be noting that the traceback may not be
5776 correct if this routine is called in a tied method.
5780 # Tied method do not create a context, so may get wrong message:
5786 # If this is going to a slave editor, but we're not the primary
5787 # debugger, reset it first.
5789 if $fh eq $LINEINFO # slave editor
5790 and $LINEINFO eq $OUT # normal output
5791 and $term_pid != $$; # not the primary
5793 # Collect the actual trace information to be formatted.
5794 # This is an array of hashes of subroutine call info.
5795 my @sub = dump_trace( $_[0] + 1, $_[1] );
5797 # Grab the "short report" flag from @_.
5798 my $short = $_[2]; # Print short report, next one for sub name
5800 # Run through the traceback info, format it, and print it.
5802 for ( $i = 0 ; $i <= $#sub ; $i++ ) {
5804 # Drop out if the user has lost interest and hit control-C.
5807 # Set the separator so arrys print nice.
5810 # Grab and stringify the arguments if they are there.
5812 defined $sub[$i]{args}
5813 ? "(@{ $sub[$i]{args} })"
5816 # Shorten them up if $maxtrace says they're too long.
5817 $args = ( substr $args, 0, $maxtrace - 3 ) . '...'
5818 if length $args > $maxtrace;
5820 # Get the file name.
5821 my $file = $sub[$i]{file};
5823 # Put in a filename header if short is off.
5824 $file = $file eq '-e' ? $file : "file '$file'" unless $short;
5826 # Get the actual sub's name, and shorten to $maxtrace's requirement.
5828 $s = ( substr $s, 0, $maxtrace - 3 ) . '...' if length $s > $maxtrace;
5830 # Short report uses trimmed file and sub names.
5832 my $sub = @_ >= 4 ? $_[3] : $s;
5833 print $fh "$sub[$i]{context}=$sub$args from $file:$sub[$i]{line}\n";
5834 } ## end if ($short)
5836 # Non-short report includes full names.
5838 print $fh "$sub[$i]{context} = $s$args"
5839 . " called from $file"
5840 . " line $sub[$i]{line}\n";
5842 } ## end for ($i = 0 ; $i <= $#sub...
5843 } ## end sub print_trace
5845 =head2 dump_trace(skip[,count])
5847 Actually collect the traceback information available via C<caller()>. It does
5848 some filtering and cleanup of the data, but mostly it just collects it to
5849 make C<print_trace()>'s job easier.
5851 C<skip> defines the number of stack frames to be skipped, working backwards
5852 from the most current. C<count> determines the total number of frames to
5853 be returned; all of them (well, the first 10^9) are returned if C<count>
5856 This routine returns a list of hashes, from most-recent to least-recent
5857 stack frame. Each has the following keys and values:
5861 =item * C<context> - C<.> (null), C<$> (scalar), or C<@> (array)
5863 =item * C<sub> - subroutine name, or C<eval> information
5865 =item * C<args> - undef, or a reference to an array of arguments
5867 =item * C<file> - the file in which this item was defined (if any)
5869 =item * C<line> - the line on which it was defined
5877 # How many levels to skip.
5880 # How many levels to show. (1e9 is a cheap way of saying "all of them";
5881 # it's unlikely that we'll have more than a billion stack frames. If you
5882 # do, you've got an awfully big machine...)
5883 my $count = shift || 1e9;
5885 # We increment skip because caller(1) is the first level *back* from
5886 # the current one. Add $skip to the count of frames so we have a
5887 # simple stop criterion, counting from $skip to $count+$skip.
5891 # These variables are used to capture output from caller();
5892 my ( $p, $file, $line, $sub, $h, $context );
5894 my ( $e, $r, @a, @sub, $args );
5896 # XXX Okay... why'd we do that?
5897 my $nothard = not $frame & 8;
5900 # Do not want to trace this.
5901 my $otrace = $trace;
5904 # Start out at the skip count.
5905 # If we haven't reached the number of frames requested, and caller() is
5906 # still returning something, stay in the loop. (If we pass the requested
5907 # number of stack frames, or we run out - caller() returns nothing - we
5909 # Up the stack frame index to go back one more level each time.
5913 and ( $p, $file, $line, $sub, $h, $context, $e, $r ) = caller($i) ;
5918 # Go through the arguments and save them for later.
5922 if ( not defined $arg ) { # undefined parameter
5926 elsif ( $nothard and tied $arg ) { # tied parameter
5929 elsif ( $nothard and $type = ref $arg ) { # reference
5930 push @a, "ref($type)";
5932 else { # can be stringified
5934 "$arg"; # Safe to stringify now - should not call f().
5936 # Backslash any single-quotes or backslashes.
5939 # Single-quote it unless it's a number or a colon-separated
5942 unless /^(?: -?[\d.]+ | \*[\w:]* )$/x;
5944 # Turn high-bit characters into meta-whatever.
5945 s/([\200-\377])/sprintf("M-%c",ord($1)&0177)/eg;
5947 # Turn control characters into ^-whatever.
5948 s/([\0-\37\177])/sprintf("^%c",ord($1)^64)/eg;
5951 } ## end else [ if (not defined $arg)
5952 } ## end for $arg (@args)
5954 # If context is true, this is array (@)context.
5955 # If context is false, this is scalar ($) context.
5956 # If neither, context isn't defined. (This is apparently a 'can't
5958 $context = $context ? '@' : ( defined $context ? "\$" : '.' );
5960 # if the sub has args ($h true), make an anonymous array of the
5962 $args = $h ? [@a] : undef;
5964 # remove trailing newline-whitespace-semicolon-end of line sequence
5965 # from the eval text, if any.
5966 $e =~ s/\n\s*\;\s*\Z// if $e;
5968 # Escape backslashed single-quotes again if necessary.
5969 $e =~ s/([\\\'])/\\$1/g if $e;
5971 # if the require flag is true, the eval text is from a require.
5973 $sub = "require '$e'";
5976 # if it's false, the eval text is really from an eval.
5977 elsif ( defined $r ) {
5981 # If the sub is '(eval)', this is a block eval, meaning we don't
5982 # know what the eval'ed text actually was.
5983 elsif ( $sub eq '(eval)' ) {
5984 $sub = "eval {...}";
5987 # Stick the collected information into @sub as an anonymous hash.
5991 context => $context,
5999 # Stop processing frames if the user hit control-C.
6001 } ## end for ($i = $skip ; $i < ...
6003 # Restore the trace value again.
6006 } ## end sub dump_trace
6010 C<action()> takes input provided as the argument to an add-action command,
6011 either pre- or post-, and makes sure it's a complete command. It doesn't do
6012 any fancy parsing; it just keeps reading input until it gets a string
6013 without a trailing backslash.
6020 while ( $action =~ s/\\$// ) {
6022 # We have a backslash on the end. Read more.
6024 } ## end while ($action =~ s/\\$//)
6026 # Return the assembled action.
6032 This routine mostly just packages up a regular expression to be used
6033 to check that the thing it's being matched against has properly-matched
6036 Of note is the definition of the C<$balanced_brace_re> global via C<||=>, which
6037 speeds things up by only creating the qr//'ed expression once; if it's
6038 already defined, we don't try to define it again. A speed hack.
6044 # I hate using globals!
6045 $balanced_brace_re ||= qr{
6048 (?> [^{}] + ) # Non-parens without backtracking
6050 (??{ $balanced_brace_re }) # Group with matching parens
6054 return $_[0] !~ m/$balanced_brace_re/;
6055 } ## end sub unbalanced
6059 C<gets()> is a primitive (very primitive) routine to read continuations.
6060 It was devised for reading continuations for actions.
6061 it just reads more input with C<readline()> and returns it.
6066 &readline("cont: ");
6069 =head2 C<DB::system()> - handle calls to<system()> without messing up the debugger
6071 The C<system()> function assumes that it can just go ahead and use STDIN and
6072 STDOUT, but under the debugger, we want it to use the debugger's input and
6075 C<DB::system()> socks away the program's STDIN and STDOUT, and then substitutes
6076 the debugger's IN and OUT filehandles for them. It does the C<system()> call,
6077 and then puts everything back again.
6083 # We save, change, then restore STDIN and STDOUT to avoid fork() since
6084 # some non-Unix systems can do system() but have problems with fork().
6085 open( SAVEIN, "<&STDIN" ) || &warn("Can't save STDIN");
6086 open( SAVEOUT, ">&STDOUT" ) || &warn("Can't save STDOUT");
6087 open( STDIN, "<&IN" ) || &warn("Can't redirect STDIN");
6088 open( STDOUT, ">&OUT" ) || &warn("Can't redirect STDOUT");
6090 # XXX: using csh or tcsh destroys sigint retvals!
6092 open( STDIN, "<&SAVEIN" ) || &warn("Can't restore STDIN");
6093 open( STDOUT, ">&SAVEOUT" ) || &warn("Can't restore STDOUT");
6097 # most of the $? crud was coping with broken cshisms
6099 &warn( "(Command exited ", ( $? >> 8 ), ")\n" );
6103 "(Command died of SIG#",
6105 ( ( $? & 128 ) ? " -- core dumped" : "" ),
6114 =head1 TTY MANAGEMENT
6116 The subs here do some of the terminal management for multiple debuggers.
6120 Top-level function called when we want to set up a new terminal for use
6123 If the C<noTTY> debugger option was set, we'll either use the terminal
6124 supplied (the value of the C<noTTY> option), or we'll use C<Term::Rendezvous>
6125 to find one. If we're a forked debugger, we call C<resetterm> to try to
6126 get a whole new terminal if we can.
6128 In either case, we set up the terminal next. If the C<ReadLine> option was
6129 true, we'll get a C<Term::ReadLine> object for the current terminal and save
6130 the appropriate attributes. We then
6136 # Load Term::Readline, but quietly; don't debug it and don't trace it.
6139 require Term::ReadLine;
6141 # If noTTY is set, but we have a TTY name, go ahead and hook up to it.
6144 my ( $i, $o ) = split $tty, /,/;
6145 $o = $i unless defined $o;
6146 open( IN, "<$i" ) or die "Cannot open TTY '$i' for read: $!";
6147 open( OUT, ">$o" ) or die "Cannot open TTY '$o' for write: $!";
6150 my $sel = select($OUT);
6155 # We don't have a TTY - try to find one via Term::Rendezvous.
6157 require Term::Rendezvous;
6159 # See if we have anything to pass to Term::Rendezvous.
6160 # Use $HOME/.perldbtty$$ if not.
6161 my $rv = $ENV{PERLDB_NOTTY} || "$ENV{HOME}/.perldbtty$$";
6163 # Rendezvous and get the filehandles.
6164 my $term_rv = Term::Rendezvous->new( $rv );
6166 $OUT = $term_rv->OUT;
6167 } ## end else [ if ($tty)
6168 } ## end if ($notty)
6170 # We're a daughter debugger. Try to fork off another TTY.
6171 if ( $term_pid eq '-1' ) { # In a TTY with another debugger
6175 # If we shouldn't use Term::ReadLine, don't.
6177 $term = Term::ReadLine::Stub->new( 'perldb', $IN, $OUT );
6180 # We're using Term::ReadLine. Get all the attributes for this terminal.
6182 $term = Term::ReadLine->new( 'perldb', $IN, $OUT );
6184 $rl_attribs = $term->Attribs;
6185 $rl_attribs->{basic_word_break_characters} .= '-:+/*,[])}'
6186 if defined $rl_attribs->{basic_word_break_characters}
6187 and index( $rl_attribs->{basic_word_break_characters}, ":" ) == -1;
6188 $rl_attribs->{special_prefixes} = '$@&%';
6189 $rl_attribs->{completer_word_break_characters} .= '$@&%';
6190 $rl_attribs->{completion_function} = \&db_complete;
6191 } ## end else [ if (!$rl)
6193 # Set up the LINEINFO filehandle.
6194 $LINEINFO = $OUT unless defined $LINEINFO;
6195 $lineinfo = $console unless defined $lineinfo;
6201 if ( $term->Features->{setHistory} and "@hist" ne "?" ) {
6202 $term->SetHistory(@hist);
6205 # XXX Ornaments are turned on unconditionally, which is not
6206 # always a good thing.
6207 ornaments($ornaments) if defined $ornaments;
6209 } ## end sub setterm
6212 $histfile //= option_val("HistFile", undef);
6213 return unless defined $histfile;
6214 open my $fh, "<", $histfile or return;
6225 return unless defined $histfile;
6226 eval { require File::Path } or return;
6227 eval { require File::Basename } or return;
6228 File::Path::mkpath(File::Basename::dirname($histfile));
6229 open my $fh, ">", $histfile or die "Could not open '$histfile': $!";
6230 $histsize //= option_val("HistSize",100);
6231 my @copy = grep { $_ ne '?' } @hist;
6232 my $start = scalar(@copy) > $histsize ? scalar(@copy)-$histsize : 0;
6233 for ($start .. $#copy) {
6234 print $fh "$copy[$_]\n";
6236 close $fh or die "Could not write '$histfile': $!";
6239 =head1 GET_FORK_TTY EXAMPLE FUNCTIONS
6241 When the process being debugged forks, or the process invokes a command
6242 via C<system()> which starts a new debugger, we need to be able to get a new
6243 C<IN> and C<OUT> filehandle for the new debugger. Otherwise, the two processes
6244 fight over the terminal, and you can never quite be sure who's going to get the
6245 input you're typing.
6247 C<get_fork_TTY> is a glob-aliased function which calls the real function that
6248 is tasked with doing all the necessary operating system mojo to get a new
6249 TTY (and probably another window) and to direct the new debugger to read and
6252 The debugger provides C<get_fork_TTY> functions which work for TCP
6253 socket servers, X11, OS/2, and Mac OS X. Other systems are not
6254 supported. You are encouraged to write C<get_fork_TTY> functions which
6255 work for I<your> platform and contribute them.
6257 =head3 C<socket_get_fork_TTY>
6261 sub connect_remoteport {
6264 my $socket = IO::Socket::INET->new(
6266 PeerAddr => $remoteport,
6270 die "Unable to connect to remote host: $remoteport\n";
6275 sub socket_get_fork_TTY {
6276 $tty = $LINEINFO = $IN = $OUT = connect_remoteport();
6278 # Do I need to worry about setting $term?
6280 reset_IN_OUT( $IN, $OUT );
6284 =head3 C<xterm_get_fork_TTY>
6286 This function provides the C<get_fork_TTY> function for X11. If a
6287 program running under the debugger forks, a new <xterm> window is opened and
6288 the subsidiary debugger is directed there.
6290 The C<open()> call is of particular note here. We have the new C<xterm>
6291 we're spawning route file number 3 to STDOUT, and then execute the C<tty>
6292 command (which prints the device name of the TTY we'll want to use for input
6293 and output to STDOUT, then C<sleep> for a very long time, routing this output
6294 to file number 3. This way we can simply read from the <XT> filehandle (which
6295 is STDOUT from the I<commands> we ran) to get the TTY we want to use.
6297 Only works if C<xterm> is in your path and C<$ENV{DISPLAY}>, etc. are
6302 sub xterm_get_fork_TTY {
6303 ( my $name = $0 ) =~ s,^.*[/\\],,s;
6305 qq[3>&1 xterm -title "Daughter Perl debugger $pids $name" -e sh -c 'tty 1>&3;\
6308 # Get the output from 'tty' and clean it up a little.
6312 $pidprompt = ''; # Shown anyway in titlebar
6314 # We need $term defined or we can not switch to the newly created xterm
6315 if ($tty ne '' && !defined $term) {
6316 require Term::ReadLine;
6318 $term = Term::ReadLine::Stub->new( 'perldb', $IN, $OUT );
6321 $term = Term::ReadLine->new( 'perldb', $IN, $OUT );
6324 # There's our new TTY.
6326 } ## end sub xterm_get_fork_TTY
6328 =head3 C<os2_get_fork_TTY>
6330 XXX It behooves an OS/2 expert to write the necessary documentation for this!
6334 # This example function resets $IN, $OUT itself
6336 sub os2_get_fork_TTY { # A simplification of the following (and works without):
6338 ( my $name = $0 ) =~ s,^.*[/\\],,s;
6339 my %opt = ( title => "Daughter Perl debugger $pids $name",
6340 ($rl ? (read_by_key => 1) : ()) );
6341 require OS2::Process;
6342 my ($in, $out, $pid) = eval { OS2::Process::io_term(related => 0, %opt) }
6344 $pidprompt = ''; # Shown anyway in titlebar
6345 reset_IN_OUT($in, $out);
6347 return ''; # Indicate that reset_IN_OUT is called
6348 } ## end sub os2_get_fork_TTY
6350 =head3 C<macosx_get_fork_TTY>
6352 The Mac OS X version uses AppleScript to tell Terminal.app to create
6357 # Notes about Terminal.app's AppleScript support,
6358 # (aka things that might break in future OS versions).
6360 # The "do script" command doesn't return a reference to the new window
6361 # it creates, but since it appears frontmost and windows are enumerated
6362 # front to back, we can use "first window" === "window 1".
6364 # Since "do script" is implemented by supplying the argument (plus a
6365 # return character) as terminal input, there's a potential race condition
6366 # where the debugger could beat the shell to reading the command.
6367 # To prevent this, we wait for the screen to clear before proceeding.
6370 # There's no direct accessor for the tty device name, so we fiddle
6371 # with the window title options until it says what we want.
6374 # There _is_ a direct accessor for the tty device name, _and_ there's
6375 # a new possible component of the window title (the name of the settings
6376 # set). A separate version is needed.
6378 my @script_versions=
6380 ([237, <<'__LEOPARD__'],
6381 tell application "Terminal"
6382 do script "clear;exec sleep 100000"
6383 tell first tab of first window
6385 set custom title to "forked perl debugger"
6386 set title displays custom title to true
6387 repeat while (length of first paragraph of (get contents)) > 0
6395 [100, <<'__JAGUAR_TIGER__'],
6396 tell application "Terminal"
6397 do script "clear;exec sleep 100000"
6399 set title displays shell path to false
6400 set title displays window size to false
6401 set title displays file name to false
6402 set title displays device name to true
6403 set title displays custom title to true
6404 set custom title to ""
6405 copy "/dev/" & name to thetty
6406 set custom title to "forked perl debugger"
6407 repeat while (length of first paragraph of (get contents)) > 0
6417 sub macosx_get_fork_TTY
6419 my($version,$script,$pipe,$tty);
6421 return unless $version=$ENV{TERM_PROGRAM_VERSION};
6422 foreach my $entry (@script_versions) {
6423 if ($version>=$entry->[0]) {
6424 $script=$entry->[1];
6428 return unless defined($script);
6429 return unless open($pipe,'-|','/usr/bin/osascript','-e',$script);
6430 $tty=readline($pipe);
6432 return unless defined($tty) && $tty =~ m(^/dev/);
6437 =head2 C<create_IN_OUT($flags)>
6439 Create a new pair of filehandles, pointing to a new TTY. If impossible,
6440 try to diagnose why.
6446 =item * 1 - Don't know how to create a new TTY.
6448 =item * 2 - Debugger has forked, but we can't get a new TTY.
6450 =item * 4 - standard debugger startup is happening.
6456 sub create_IN_OUT { # Create a window with IN/OUT handles redirected there
6458 # If we know how to get a new TTY, do it! $in will have
6459 # the TTY name if get_fork_TTY works.
6460 my $in = &get_fork_TTY if defined &get_fork_TTY;
6462 # It used to be that
6463 $in = $fork_TTY if defined $fork_TTY; # Backward compatibility
6465 if ( not defined $in ) {
6468 # We don't know how.
6469 print_help(<<EOP) if $why == 1;
6470 I<#########> Forked, but do not know how to create a new B<TTY>. I<#########>
6474 print_help(<<EOP) if $why == 2;
6475 I<#########> Daughter session, do not know how to change a B<TTY>. I<#########>
6476 This may be an asynchronous session, so the parent debugger may be active.
6479 # Note that both debuggers are fighting over the same input.
6480 print_help(<<EOP) if $why != 4;
6481 Since two debuggers fight for the same TTY, input is severely entangled.
6485 I know how to switch the output to a different window in xterms, OS/2
6486 consoles, and Mac OS X Terminal.app only. For a manual switch, put the name
6487 of the created I<TTY> in B<\$DB::fork_TTY>, or define a function
6488 B<DB::get_fork_TTY()> returning this.
6490 On I<UNIX>-like systems one can get the name of a I<TTY> for the given window
6491 by typing B<tty>, and disconnect the I<shell> from I<TTY> by B<sleep 1000000>.
6494 } ## end if (not defined $in)
6495 elsif ( $in ne '' ) {
6499 $console = ''; # Indicate no need to open-from-the-console
6502 } ## end sub create_IN_OUT
6506 Handles rejiggering the prompt when we've forked off a new debugger.
6508 If the new debugger happened because of a C<system()> that invoked a
6509 program under the debugger, the arrow between the old pid and the new
6510 in the prompt has I<two> dashes instead of one.
6512 We take the current list of pids and add this one to the end. If there
6513 isn't any list yet, we make one up out of the initial pid associated with
6514 the terminal and our new pid, sticking an arrow (either one-dashed or
6515 two dashed) in between them.
6517 If C<CreateTTY> is off, or C<resetterm> was called with no arguments,
6518 we don't try to create a new IN and OUT filehandle. Otherwise, we go ahead
6523 sub resetterm { # We forked, so we need a different TTY
6525 # Needs to be passed to create_IN_OUT() as well.
6528 # resetterm(2): got in here because of a system() starting a debugger.
6529 # resetterm(1): just forked.
6530 my $systemed = $in > 1 ? '-' : '';
6532 # If there's already a list of pids, add this to the end.
6534 $pids =~ s/\]/$systemed->$$]/;
6537 # No pid list. Time to make one.
6539 $pids = "[$term_pid->$$]";
6542 # The prompt we're going to be using for this debugger.
6545 # We now 0wnz this terminal.
6548 # Just return if we're not supposed to try to create a new TTY.
6549 return unless $CreateTTY & $in;
6551 # Try to create a new IN/OUT pair.
6553 } ## end sub resetterm
6557 First, we handle stuff in the typeahead buffer. If there is any, we shift off
6558 the next line, print a message saying we got it, add it to the terminal
6559 history (if possible), and return it.
6561 If there's nothing in the typeahead buffer, check the command filehandle stack.
6562 If there are any filehandles there, read from the last one, and return the line
6563 if we got one. If not, we pop the filehandle off and close it, and try the
6564 next one up the stack.
6566 If we've emptied the filehandle stack, we check to see if we've got a socket
6567 open, and we read that and return it if we do. If we don't, we just call the
6568 core C<readline()> and return its value.
6574 # Localize to prevent it from being smashed in the program being debugged.
6577 # Pull a line out of the typeahead if there's stuff there.
6580 # How many lines left.
6581 my $left = @typeahead;
6583 # Get the next line.
6584 my $got = shift @typeahead;
6586 # Print a message saying we got input from the typeahead.
6588 print $OUT "auto(-$left)", shift, $got, "\n";
6590 # Add it to the terminal history (if possible).
6591 $term->AddHistory($got)
6593 and defined $term->Features->{addHistory};
6595 } ## end if (@typeahead)
6597 # We really need to read some input. Turn off entry/exit trace and
6598 # return value printing.
6602 # If there are stacked filehandles to read from ...
6605 # Read from the last one in the stack.
6606 my $line = CORE::readline( $cmdfhs[-1] );
6608 # If we got a line ...
6610 ? ( print $OUT ">> $line" and return $line ) # Echo and return
6611 : close pop @cmdfhs; # Pop and close
6612 } ## end while (@cmdfhs)
6614 # Nothing on the filehandle stack. Socket?
6615 if ( ref $OUT and UNIVERSAL::isa( $OUT, 'IO::Socket::INET' ) ) {
6617 # Send anything we have to send.
6618 $OUT->write( join( '', @_ ) );
6620 # Receive anything there is to receive.
6625 $IN->recv( $buf = '', 2048 ); # XXX "what's wrong with sysread?"
6626 # XXX Don't know. You tell me.
6627 } while length $buf and ($stuff .= $buf) !~ /\n/;
6631 } ## end if (ref $OUT and UNIVERSAL::isa...
6633 # No socket. Just read from the terminal.
6635 $term->readline(@_);
6637 } ## end sub readline
6639 =head1 OPTIONS SUPPORT ROUTINES
6641 These routines handle listing and setting option values.
6643 =head2 C<dump_option> - list the current value of an option setting
6645 This routine uses C<option_val> to look up the value for an option.
6646 It cleans up escaped single-quotes and then displays the option and
6652 my ( $opt, $val ) = @_;
6653 $val = option_val( $opt, 'N/A' );
6654 $val =~ s/([\\\'])/\\$1/g;
6655 printf $OUT "%20s = '%s'\n", $opt, $val;
6656 } ## end sub dump_option
6658 sub options2remember {
6659 foreach my $k (@RememberOnROptions) {
6660 $option{$k} = option_val( $k, 'N/A' );
6665 =head2 C<option_val> - find the current value of an option
6667 This can't just be a simple hash lookup because of the indirect way that
6668 the option values are stored. Some are retrieved by calling a subroutine,
6669 some are just variables.
6671 You must supply a default value to be used in case the option isn't set.
6676 my ( $opt, $default ) = @_;
6679 # Does this option exist, and is it a variable?
6680 # If so, retrieve the value via the value in %optionVars.
6681 if ( defined $optionVars{$opt}
6682 and defined ${ $optionVars{$opt} } )
6684 $val = ${ $optionVars{$opt} };
6687 # Does this option exist, and it's a subroutine?
6688 # If so, call the subroutine via the ref in %optionAction
6689 # and capture the value.
6690 elsif ( defined $optionAction{$opt}
6691 and defined &{ $optionAction{$opt} } )
6693 $val = &{ $optionAction{$opt} }();
6696 # If there's an action or variable for the supplied option,
6697 # but no value was set, use the default.
6698 elsif (defined $optionAction{$opt} and not defined $option{$opt}
6699 or defined $optionVars{$opt} and not defined ${ $optionVars{$opt} } )
6704 # Otherwise, do the simple hash lookup.
6706 $val = $option{$opt};
6709 # If the value isn't defined, use the default.
6710 # Then return whatever the value is.
6711 $val = $default unless defined $val;
6713 } ## end sub option_val
6715 =head2 C<parse_options>
6717 Handles the parsing and execution of option setting/displaying commands.
6719 An option entered by itself is assumed to be I<set me to 1> (the default value)
6720 if the option is a boolean one. If not, the user is prompted to enter a valid
6721 value or to query the current value (via C<option? >).
6723 If C<option=value> is entered, we try to extract a quoted string from the
6724 value (if it is quoted). If it's not, we just use the whole value as-is.
6726 We load any modules required to service this option, and then we set it: if
6727 it just gets stuck in a variable, we do that; if there's a subroutine to
6728 handle setting the option, we call that.
6730 Finally, if we're running in interactive mode, we display the effect of the
6731 user's command back to the terminal, skipping this if we're setting things
6732 during initialization.
6740 # These options need a value. Don't allow them to be clobbered by accident.
6741 my %opt_needs_val = map { ( $_ => 1 ) } qw{
6742 dumpDepth arrayDepth hashDepth LineInfo maxTraceLen ornaments windowSize
6743 pager quote ReadLine recallCommand RemotePort ShellBang TTY CommandSet
6749 # Clean off excess leading whitespace.
6752 # Options are always all word characters, followed by a non-word
6754 s/^(\w+)(\W?)// or print( $OUT "Invalid option '$_'\n" ), last;
6755 my ( $opt, $sep ) = ( $1, $2 );
6757 # Make sure that such an option exists.
6758 my $matches = grep( /^\Q$opt/ && ( $option = $_ ), @options )
6759 || grep( /^\Q$opt/i && ( $option = $_ ), @options );
6761 print( $OUT "Unknown option '$opt'\n" ), next unless $matches;
6762 print( $OUT "Ambiguous option '$opt'\n" ), next if $matches > 1;
6765 # '?' as separator means query, but must have whitespace after it.
6766 if ( "?" eq $sep ) {
6767 print( $OUT "Option query '$opt?' followed by non-space '$_'\n" ),
6771 #&dump_option($opt);
6772 } ## end if ("?" eq $sep)
6774 # Separator is whitespace (or just a carriage return).
6775 # They're going for a default, which we assume is 1.
6776 elsif ( $sep !~ /\S/ ) {
6778 $val = "1"; # this is an evil default; make 'em set it!
6781 # Separator is =. Trying to set a value.
6782 elsif ( $sep eq "=" ) {
6784 # If quoted, extract a quoted string.
6785 if (s/ (["']) ( (?: \\. | (?! \1 ) [^\\] )* ) \1 //x) {
6787 ( $val = $2 ) =~ s/\\([$quote\\])/$1/g;
6790 # Not quoted. Use the whole thing. Warn about 'option='.
6794 print OUT qq(Option better cleared using $opt=""\n)
6796 } ## end else [ if (s/ (["']) ( (?: \\. | (?! \1 ) [^\\] )* ) \1 //x)
6798 } ## end elsif ($sep eq "=")
6800 # "Quoted" with [], <>, or {}.
6801 else { #{ to "let some poor schmuck bounce on the % key in B<vi>."
6803 "\\" . substr( ")]>}$sep", index( "([<{", $sep ), 1 ); #}
6804 s/^(([^\\$end]|\\[\\$end])*)$end($|\s+)//
6805 or print( $OUT "Unclosed option value '$opt$sep$_'\n" ), last;
6806 ( $val = $1 ) =~ s/\\([\\$end])/$1/g;
6807 } ## end else [ if ("?" eq $sep)
6809 # Exclude non-booleans from getting set to 1 by default.
6810 if ( $opt_needs_val{$option} && $val_defaulted ) {
6811 my $cmd = ( $CommandSet eq '580' ) ? 'o' : 'O';
6813 "Option '$opt' is non-boolean. Use '$cmd $option=VAL' to set, '$cmd $option?' to query\n";
6815 } ## end if ($opt_needs_val{$option...
6817 # Save the option value.
6818 $option{$option} = $val if defined $val;
6820 # Load any module that this option requires.
6824 require '$optionRequire{$option}';
6826 } || die $@ # XXX: shouldn't happen
6827 if defined $optionRequire{$option}
6831 # Stick it in the proper variable if it goes in a variable.
6832 ${ $optionVars{$option} } = $val
6833 if defined $optionVars{$option}
6836 # Call the appropriate sub if it gets set via sub.
6837 &{ $optionAction{$option} }($val)
6838 if defined $optionAction{$option}
6839 && defined &{ $optionAction{$option} }
6842 # Not initialization - echo the value we set it to.
6843 dump_option($option) unless $OUT eq \*STDERR;
6844 } ## end while (length)
6845 } ## end sub parse_options
6847 =head1 RESTART SUPPORT
6849 These routines are used to store (and restore) lists of items in environment
6850 variables during a restart.
6854 Set_list packages up items to be stored in a set of environment variables
6855 (VAR_n, containing the number of items, and VAR_0, VAR_1, etc., containing
6856 the values). Values outside the standard ASCII charset are stored by encoding
6857 then as hexadecimal values.
6862 my ( $stem, @list ) = @_;
6865 # VAR_n: how many we have. Scalar assignment gets the number of items.
6866 $ENV{"${stem}_n"} = @list;
6868 # Grab each item in the list, escape the backslashes, encode the non-ASCII
6869 # as hex, and then save in the appropriate VAR_0, VAR_1, etc.
6870 for $i ( 0 .. $#list ) {
6872 $val =~ s/\\/\\\\/g;
6873 $val =~ s/([\0-\37\177\200-\377])/"\\0x" . unpack('H2',$1)/eg;
6874 $ENV{"${stem}_$i"} = $val;
6875 } ## end for $i (0 .. $#list)
6876 } ## end sub set_list
6880 Reverse the set_list operation: grab VAR_n to see how many we should be getting
6881 back, and then pull VAR_0, VAR_1. etc. back out.
6888 my $n = delete $ENV{"${stem}_n"};
6890 for $i ( 0 .. $n - 1 ) {
6891 $val = delete $ENV{"${stem}_$i"};
6892 $val =~ s/\\((\\)|0x(..))/ $2 ? $2 : pack('H2', $3) /ge;
6896 } ## end sub get_list
6898 =head1 MISCELLANEOUS SIGNAL AND I/O MANAGEMENT
6902 The C<catch()> subroutine is the essence of fast and low-impact. We simply
6903 set an already-existing global scalar variable to a constant value. This
6904 avoids allocating any memory possibly in the middle of something that will
6905 get all confused if we do, particularly under I<unsafe signals>.
6911 return; # Put nothing on the stack - malloc/free land!
6916 C<warn> emits a warning, by joining together its arguments and printing
6917 them, with couple of fillips.
6919 If the composited message I<doesn't> end with a newline, we automatically
6920 add C<$!> and a newline to the end of the message. The subroutine expects $OUT
6921 to be set to the filehandle to be used to output warnings; it makes no
6922 assumptions about what filehandles are available.
6927 my ($msg) = join( "", @_ );
6928 $msg .= ": $!\n" unless $msg =~ /\n$/;
6933 =head1 INITIALIZATION TTY SUPPORT
6935 =head2 C<reset_IN_OUT>
6937 This routine handles restoring the debugger's input and output filehandles
6938 after we've tried and failed to move them elsewhere. In addition, it assigns
6939 the debugger's output filehandle to $LINEINFO if it was already open there.
6944 my $switch_li = $LINEINFO eq $OUT;
6946 # If there's a term and it's able to get a new tty, try to get one.
6947 if ( $term and $term->Features->{newTTY} ) {
6948 ( $IN, $OUT ) = ( shift, shift );
6949 $term->newTTY( $IN, $OUT );
6952 # This term can't get a new tty now. Better luck later.
6954 &warn("Too late to set IN/OUT filehandles, enabled on next 'R'!\n");
6957 # Set the filehndles up as they were.
6959 ( $IN, $OUT ) = ( shift, shift );
6962 # Unbuffer the output filehandle.
6963 my $o = select $OUT;
6967 # Point LINEINFO to the same output filehandle if it was there before.
6968 $LINEINFO = $OUT if $switch_li;
6969 } ## end sub reset_IN_OUT
6971 =head1 OPTION SUPPORT ROUTINES
6973 The following routines are used to process some of the more complicated
6978 Sets the input and output filehandles to the specified files or pipes.
6979 If the terminal supports switching, we go ahead and do it. If not, and
6980 there's already a terminal in place, we save the information to take effect
6983 If there's no terminal yet (for instance, during debugger initialization),
6984 we go ahead and set C<$console> and C<$tty> to the file indicated.
6990 if ( @_ and $term and $term->Features->{newTTY} ) {
6992 # This terminal supports switching to a new TTY.
6993 # Can be a list of two files, or on string containing both names,
6995 # XXX Should this perhaps be an assignment from @_?
6996 my ( $in, $out ) = shift;
6999 # Split list apart if supplied.
7000 ( $in, $out ) = split /,/, $in, 2;
7004 # Use the same file for both input and output.
7008 # Open file onto the debugger's filehandles, if you can.
7009 open IN, $in or die "cannot open '$in' for read: $!";
7010 open OUT, ">$out" or die "cannot open '$out' for write: $!";
7012 # Swap to the new filehandles.
7013 reset_IN_OUT( \*IN, \*OUT );
7015 # Save the setting for later.
7017 } ## end if (@_ and $term and $term...
7019 # Terminal doesn't support new TTY, or doesn't support readline.
7020 # Can't do it now, try restarting.
7021 &warn("Too late to set TTY, enabled on next 'R'!\n") if $term and @_;
7023 # Useful if done through PERLDB_OPTS:
7024 $console = $tty = shift if @_;
7026 # Return whatever the TTY is.
7032 Sets the C<$notty> global, controlling whether or not the debugger tries to
7033 get a terminal to read from. If called after a terminal is already in place,
7034 we save the value to use it if we're restarted.
7040 &warn("Too late to set noTTY, enabled on next 'R'!\n") if @_;
7042 $notty = shift if @_;
7048 Sets the C<$rl> option variable. If 0, we use C<Term::ReadLine::Stub>
7049 (essentially, no C<readline> processing on this I<terminal>). Otherwise, we
7050 use C<Term::ReadLine>. Can't be changed after a terminal's in place; we save
7051 the value in case a restart is done so we can change it then.
7057 &warn("Too late to set ReadLine, enabled on next 'R'!\n") if @_;
7061 } ## end sub ReadLine
7063 =head2 C<RemotePort>
7065 Sets the port that the debugger will try to connect to when starting up.
7066 If the terminal's already been set up, we can't do it, but we remember the
7067 setting in case the user does a restart.
7073 &warn("Too late to set RemotePort, enabled on next 'R'!\n") if @_;
7075 $remoteport = shift if @_;
7077 } ## end sub RemotePort
7081 Checks with the terminal to see if C<Tk> is running, and returns true or
7082 false. Returns false if the current terminal doesn't support C<readline>.
7087 if ( ${ $term->Features }{tkRunning} ) {
7088 return $term->tkRunning(@_);
7092 print $OUT "tkRunning not supported by current ReadLine package.\n";
7095 } ## end sub tkRunning
7099 Sets nonstop mode. If a terminal's already been set up, it's too late; the
7100 debugger remembers the setting in case you restart, though.
7106 &warn("Too late to set up NonStop mode, enabled on next 'R'!\n")
7109 $runnonstop = shift if @_;
7111 } ## end sub NonStop
7115 &warn("Some flag changes could not take effect until next 'R'!\n")
7118 $^P = parse_DollarCaretP_flags(shift) if @_;
7119 expand_DollarCaretP_flags($^P);
7124 Set up the C<$pager> variable. Adds a pipe to the front unless there's one
7132 $pager = "|" . $pager unless $pager =~ /^(\+?\>|\|)/;
7139 Sets the shell escape command, and generates a printable copy to be used
7146 # If we got an argument, meta-quote it, and add '\b' if it
7147 # ends in a word character.
7149 $sh = quotemeta shift;
7150 $sh .= "\\b" if $sh =~ /\w$/;
7153 # Generate the printable version for the help:
7154 $psh = $sh; # copy it
7155 $psh =~ s/\\b$//; # Take off trailing \b if any
7156 $psh =~ s/\\(.)/$1/g; # De-escape
7157 $psh; # return the printable version
7158 } ## end sub shellBang
7162 If the terminal has its own ornaments, fetch them. Otherwise accept whatever
7163 was passed as the argument. (This means you can't override the terminal's
7169 if ( defined $term ) {
7171 # We don't want to show warning backtraces, but we do want die() ones.
7172 local ( $warnLevel, $dieLevel ) = ( 0, 1 );
7174 # No ornaments if the terminal doesn't support them.
7175 return '' unless $term->Features->{ornaments};
7176 eval { $term->ornaments(@_) } || '';
7179 # Use what was passed in if we can't determine it ourselves.
7183 } ## end sub ornaments
7185 =head2 C<recallCommand>
7187 Sets the recall command, and builds a printable version which will appear in
7194 # If there is input, metaquote it. Add '\b' if it ends with a word
7197 $rc = quotemeta shift;
7198 $rc .= "\\b" if $rc =~ /\w$/;
7201 # Build it into a printable version.
7202 $prc = $rc; # Copy it
7203 $prc =~ s/\\b$//; # Remove trailing \b
7204 $prc =~ s/\\(.)/$1/g; # Remove escapes
7205 $prc; # Return the printable version
7206 } ## end sub recallCommand
7208 =head2 C<LineInfo> - where the line number information goes
7210 Called with no arguments, returns the file or pipe that line info should go to.
7212 Called with an argument (a file or a pipe), it opens that onto the
7213 C<LINEINFO> filehandle, unbuffers the filehandle, and then returns the
7214 file or pipe again to the caller.
7219 return $lineinfo unless @_;
7222 # If this is a valid "thing to be opened for output", tack a
7223 # '>' onto the front.
7224 my $stream = ( $lineinfo =~ /^(\+?\>|\|)/ ) ? $lineinfo : ">$lineinfo";
7226 # If this is a pipe, the stream points to a slave editor.
7227 $slave_editor = ( $stream =~ /^\|/ );
7229 # Open it up and unbuffer it.
7230 open( LINEINFO, "$stream" ) || &warn("Cannot open '$stream' for write");
7231 $LINEINFO = \*LINEINFO;
7232 my $save = select($LINEINFO);
7236 # Hand the file or pipe back again.
7238 } ## end sub LineInfo
7240 =head1 COMMAND SUPPORT ROUTINES
7242 These subroutines provide functionality for various commands.
7244 =head2 C<list_modules>
7246 For the C<M> command: list modules loaded and their versions.
7247 Essentially just runs through the keys in %INC, picks each package's
7248 C<$VERSION> variable, gets the file name, and formats the information
7253 sub list_modules { # versions
7257 # keys are the "as-loaded" name, values are the fully-qualified path
7258 # to the file itself.
7260 $file = $_; # get the module name
7261 s,\.p[lm]$,,i; # remove '.pl' or '.pm'
7262 s,/,::,g; # change '/' to '::'
7263 s/^perl5db$/DB/; # Special case: debugger
7264 # moves to package DB
7265 s/^Term::ReadLine::readline$/readline/; # simplify readline
7267 # If the package has a $VERSION package global (as all good packages
7268 # should!) decode it and save as partial message.
7269 if ( defined ${ $_ . '::VERSION' } ) {
7270 $version{$file} = "${ $_ . '::VERSION' } from ";
7273 # Finish up the message with the file the package came from.
7274 $version{$file} .= $INC{$file};
7275 } ## end for (keys %INC)
7277 # Hey, dumpit() formats a hash nicely, so why not use it?
7278 dumpit( $OUT, \%version );
7279 } ## end sub list_modules
7283 Sets up the monster string used to format and print the help.
7285 =head3 HELP MESSAGE FORMAT
7287 The help message is a peculiar format unto itself; it mixes C<pod> I<ornaments>
7288 (C<< B<> >> C<< I<> >>) with tabs to come up with a format that's fairly
7289 easy to parse and portable, but which still allows the help to be a little
7290 nicer than just plain text.
7292 Essentially, you define the command name (usually marked up with C<< B<> >>
7293 and C<< I<> >>), followed by a tab, and then the descriptive text, ending in a
7294 newline. The descriptive text can also be marked up in the same way. If you
7295 need to continue the descriptive text to another line, start that line with
7296 just tabs and then enter the marked-up text.
7298 If you are modifying the help text, I<be careful>. The help-string parser is
7299 not very sophisticated, and if you don't follow these rules it will mangle the
7300 help beyond hope until you fix the string.
7306 # XXX: make sure there are tabs between the command and explanation,
7307 # or print_help will screw up your formatting if you have
7308 # eeevil ornaments enabled. This is an insane mess.
7311 Help is currently only available for the new 5.8 command set.
7312 No help is available for the old command set.
7313 We assume you know what you're doing if you switch to it.
7316 B<s> [I<expr>] Single step [in I<expr>].
7317 B<n> [I<expr>] Next, steps over subroutine calls [in I<expr>].
7318 <B<CR>> Repeat last B<n> or B<s> command.
7319 B<r> Return from current subroutine.
7320 B<c> [I<line>|I<sub>] Continue; optionally inserts a one-time-only breakpoint
7321 at the specified position.
7322 B<l> I<min>B<+>I<incr> List I<incr>+1 lines starting at I<min>.
7323 B<l> I<min>B<->I<max> List lines I<min> through I<max>.
7324 B<l> I<line> List single I<line>.
7325 B<l> I<subname> List first window of lines from subroutine.
7326 B<l> I<\$var> List first window of lines from subroutine referenced by I<\$var>.
7327 B<l> List next window of lines.
7328 B<-> List previous window of lines.
7329 B<v> [I<line>] View window around I<line>.
7330 B<.> Return to the executed line.
7331 B<f> I<filename> Switch to viewing I<filename>. File must be already loaded.
7332 I<filename> may be either the full name of the file, or a regular
7333 expression matching the full file name:
7334 B<f> I</home/me/foo.pl> and B<f> I<oo\\.> may access the same file.
7335 Evals (with saved bodies) are considered to be filenames:
7336 B<f> I<(eval 7)> and B<f> I<eval 7\\b> access the body of the 7th eval
7337 (in the order of execution).
7338 B</>I<pattern>B</> Search forwards for I<pattern>; final B</> is optional.
7339 B<?>I<pattern>B<?> Search backwards for I<pattern>; final B<?> is optional.
7340 B<L> [I<a|b|w>] List actions and or breakpoints and or watch-expressions.
7341 B<S> [[B<!>]I<pattern>] List subroutine names [not] matching I<pattern>.
7342 B<t> [I<n>] Toggle trace mode (to max I<n> levels below current stack depth).
7343 B<t> [I<n>] I<expr> Trace through execution of I<expr>.
7344 B<b> Sets breakpoint on current line)
7345 B<b> [I<line>] [I<condition>]
7346 Set breakpoint; I<line> defaults to the current execution line;
7347 I<condition> breaks if it evaluates to true, defaults to '1'.
7348 B<b> I<subname> [I<condition>]
7349 Set breakpoint at first line of subroutine.
7350 B<b> I<\$var> Set breakpoint at first line of subroutine referenced by I<\$var>.
7351 B<b> B<load> I<filename> Set breakpoint on 'require'ing the given file.
7352 B<b> B<postpone> I<subname> [I<condition>]
7353 Set breakpoint at first line of subroutine after
7355 B<b> B<compile> I<subname>
7356 Stop after the subroutine is compiled.
7357 B<B> [I<line>] Delete the breakpoint for I<line>.
7358 B<B> I<*> Delete all breakpoints.
7359 B<a> [I<line>] I<command>
7360 Set an action to be done before the I<line> is executed;
7361 I<line> defaults to the current execution line.
7362 Sequence is: check for breakpoint/watchpoint, print line
7363 if necessary, do action, prompt user if necessary,
7366 B<A> [I<line>] Delete the action for I<line>.
7367 B<A> I<*> Delete all actions.
7368 B<w> I<expr> Add a global watch-expression.
7370 B<W> I<expr> Delete a global watch-expression.
7371 B<W> I<*> Delete all watch-expressions.
7372 B<V> [I<pkg> [I<vars>]] List some (default all) variables in package (default current).
7373 Use B<~>I<pattern> and B<!>I<pattern> for positive and negative regexps.
7374 B<X> [I<vars>] Same as \"B<V> I<currentpackage> [I<vars>]\".
7375 B<x> I<expr> Evals expression in list context, dumps the result.
7376 B<m> I<expr> Evals expression in list context, prints methods callable
7377 on the first element of the result.
7378 B<m> I<class> Prints methods callable via the given class.
7379 B<M> Show versions of loaded modules.
7380 B<i> I<class> Prints nested parents of given class.
7381 B<e> Display current thread id.
7382 B<E> Display all thread ids the current one will be identified: <n>.
7383 B<y> [I<n> [I<Vars>]] List lexicals in higher scope <n>. Vars same as B<V>.
7385 B<<> ? List Perl commands to run before each prompt.
7386 B<<> I<expr> Define Perl command to run before each prompt.
7387 B<<<> I<expr> Add to the list of Perl commands to run before each prompt.
7388 B<< *> Delete the list of perl commands to run before each prompt.
7389 B<>> ? List Perl commands to run after each prompt.
7390 B<>> I<expr> Define Perl command to run after each prompt.
7391 B<>>B<>> I<expr> Add to the list of Perl commands to run after each prompt.
7392 B<>>B< *> Delete the list of Perl commands to run after each prompt.
7393 B<{> I<db_command> Define debugger command to run before each prompt.
7394 B<{> ? List debugger commands to run before each prompt.
7395 B<{{> I<db_command> Add to the list of debugger commands to run before each prompt.
7396 B<{ *> Delete the list of debugger commands to run before each prompt.
7397 B<$prc> I<number> Redo a previous command (default previous command).
7398 B<$prc> I<-number> Redo number'th-to-last command.
7399 B<$prc> I<pattern> Redo last command that started with I<pattern>.
7400 See 'B<O> I<recallCommand>' too.
7401 B<$psh$psh> I<cmd> Run cmd in a subprocess (reads from DB::IN, writes to DB::OUT)"
7406 B<$psh> [I<cmd>] Run I<cmd> in subshell (forces \"\$SHELL -c 'cmd'\")."
7408 See 'B<O> I<shellBang>' too.
7409 B<source> I<file> Execute I<file> containing debugger commands (may nest).
7410 B<save> I<file> Save current debugger session (actual history) to I<file>.
7411 B<rerun> Rerun session to current position.
7412 B<rerun> I<n> Rerun session to numbered command.
7413 B<rerun> I<-n> Rerun session to number'th-to-last command.
7414 B<H> I<-number> Display last number commands (default all).
7415 B<H> I<*> Delete complete history.
7416 B<p> I<expr> Same as \"I<print {DB::OUT} expr>\" in current package.
7417 B<|>I<dbcmd> Run debugger command, piping DB::OUT to current pager.
7418 B<||>I<dbcmd> Same as B<|>I<dbcmd> but DB::OUT is temporarily select()ed as well.
7419 B<\=> [I<alias> I<value>] Define a command alias, or list current aliases.
7420 I<command> Execute as a perl statement in current package.
7421 B<R> Pure-man-restart of debugger, some of debugger state
7422 and command-line options may be lost.
7423 Currently the following settings are preserved:
7424 history, breakpoints and actions, debugger B<O>ptions
7425 and the following command-line options: I<-w>, I<-I>, I<-e>.
7427 B<o> [I<opt>] ... Set boolean option to true
7428 B<o> [I<opt>B<?>] Query options
7429 B<o> [I<opt>B<=>I<val>] [I<opt>=B<\">I<val>B<\">] ...
7430 Set options. Use quotes if spaces in value.
7431 I<recallCommand>, I<ShellBang> chars used to recall command or spawn shell;
7432 I<pager> program for output of \"|cmd\";
7433 I<tkRunning> run Tk while prompting (with ReadLine);
7434 I<signalLevel> I<warnLevel> I<dieLevel> level of verbosity;
7435 I<inhibit_exit> Allows stepping off the end of the script.
7436 I<ImmediateStop> Debugger should stop as early as possible.
7437 I<RemotePort> Remote hostname:port for remote debugging
7438 The following options affect what happens with B<V>, B<X>, and B<x> commands:
7439 I<arrayDepth>, I<hashDepth> print only first N elements ('' for all);
7440 I<compactDump>, I<veryCompact> change style of array and hash dump;
7441 I<globPrint> whether to print contents of globs;
7442 I<DumpDBFiles> dump arrays holding debugged files;
7443 I<DumpPackages> dump symbol tables of packages;
7444 I<DumpReused> dump contents of \"reused\" addresses;
7445 I<quote>, I<HighBit>, I<undefPrint> change style of string dump;
7446 I<bareStringify> Do not print the overload-stringified value;
7447 Other options include:
7448 I<PrintRet> affects printing of return value after B<r> command,
7449 I<frame> affects printing messages on subroutine entry/exit.
7450 I<AutoTrace> affects printing messages on possible breaking points.
7451 I<maxTraceLen> gives max length of evals/args listed in stack trace.
7452 I<ornaments> affects screen appearance of the command line.
7453 I<CreateTTY> bits control attempts to create a new TTY on events:
7454 1: on fork() 2: debugger is started inside debugger
7456 During startup options are initialized from \$ENV{PERLDB_OPTS}.
7457 You can put additional initialization options I<TTY>, I<noTTY>,
7458 I<ReadLine>, I<NonStop>, and I<RemotePort> there (or use
7459 B<R> after you set them).
7461 B<q> or B<^D> Quit. Set B<\$DB::finished = 0> to debug global destruction.
7462 B<h> Summary of debugger commands.
7463 B<h> [I<db_command>] Get help [on a specific debugger command], enter B<|h> to page.
7464 B<h h> Long help for debugger commands
7465 B<$doccmd> I<manpage> Runs the external doc viewer B<$doccmd> command on the
7466 named Perl I<manpage>, or on B<$doccmd> itself if omitted.
7467 Set B<\$DB::doccmd> to change viewer.
7469 Type '|h h' for a paged display if this was too hard to read.
7471 "; # Fix balance of vi % matching: }}}}
7473 # note: tabs in the following section are not-so-helpful
7474 $summary = <<"END_SUM";
7475 I<List/search source lines:> I<Control script execution:>
7476 B<l> [I<ln>|I<sub>] List source code B<T> Stack trace
7477 B<-> or B<.> List previous/current line B<s> [I<expr>] Single step [in expr]
7478 B<v> [I<line>] View around line B<n> [I<expr>] Next, steps over subs
7479 B<f> I<filename> View source in file <B<CR>/B<Enter>> Repeat last B<n> or B<s>
7480 B</>I<pattern>B</> B<?>I<patt>B<?> Search forw/backw B<r> Return from subroutine
7481 B<M> Show module versions B<c> [I<ln>|I<sub>] Continue until position
7482 I<Debugger controls:> B<L> List break/watch/actions
7483 B<o> [...] Set debugger options B<t> [I<n>] [I<expr>] Toggle trace [max depth] ][trace expr]
7484 B<<>[B<<>]|B<{>[B<{>]|B<>>[B<>>] [I<cmd>] Do pre/post-prompt B<b> [I<ln>|I<event>|I<sub>] [I<cnd>] Set breakpoint
7485 B<$prc> [I<N>|I<pat>] Redo a previous command B<B> I<ln|*> Delete a/all breakpoints
7486 B<H> [I<-num>] Display last num commands B<a> [I<ln>] I<cmd> Do cmd before line
7487 B<=> [I<a> I<val>] Define/list an alias B<A> I<ln|*> Delete a/all actions
7488 B<h> [I<db_cmd>] Get help on command B<w> I<expr> Add a watch expression
7489 B<h h> Complete help page B<W> I<expr|*> Delete a/all watch exprs
7490 B<|>[B<|>]I<db_cmd> Send output to pager B<$psh>\[B<$psh>\] I<syscmd> Run cmd in a subprocess
7491 B<q> or B<^D> Quit B<R> Attempt a restart
7492 I<Data Examination:> B<expr> Execute perl code, also see: B<s>,B<n>,B<t> I<expr>
7493 B<x>|B<m> I<expr> Evals expr in list context, dumps the result or lists methods.
7494 B<p> I<expr> Print expression (uses script's current package).
7495 B<S> [[B<!>]I<pat>] List subroutine names [not] matching pattern
7496 B<V> [I<Pk> [I<Vars>]] List Variables in Package. Vars can be ~pattern or !pattern.
7497 B<X> [I<Vars>] Same as \"B<V> I<current_package> [I<Vars>]\". B<i> I<class> inheritance tree.
7498 B<y> [I<n> [I<Vars>]] List lexicals in higher scope <n>. Vars same as B<V>.
7499 B<e> Display thread id B<E> Display all thread ids.
7500 For more help, type B<h> I<cmd_letter>, or run B<$doccmd perldebug> for all docs.
7503 # ')}}; # Fix balance of vi % matching
7505 # and this is really numb...
7508 B<s> [I<expr>] Single step [in I<expr>].
7509 B<n> [I<expr>] Next, steps over subroutine calls [in I<expr>].
7510 B<CR>> Repeat last B<n> or B<s> command.
7511 B<r> Return from current subroutine.
7512 B<c> [I<line>|I<sub>] Continue; optionally inserts a one-time-only breakpoint
7513 at the specified position.
7514 B<l> I<min>B<+>I<incr> List I<incr>+1 lines starting at I<min>.
7515 B<l> I<min>B<->I<max> List lines I<min> through I<max>.
7516 B<l> I<line> List single I<line>.
7517 B<l> I<subname> List first window of lines from subroutine.
7518 B<l> I<\$var> List first window of lines from subroutine referenced by I<\$var>.
7519 B<l> List next window of lines.
7520 B<-> List previous window of lines.
7521 B<w> [I<line>] List window around I<line>.
7522 B<.> Return to the executed line.
7523 B<f> I<filename> Switch to viewing I<filename>. File must be already loaded.
7524 I<filename> may be either the full name of the file, or a regular
7525 expression matching the full file name:
7526 B<f> I</home/me/foo.pl> and B<f> I<oo\\.> may access the same file.
7527 Evals (with saved bodies) are considered to be filenames:
7528 B<f> I<(eval 7)> and B<f> I<eval 7\\b> access the body of the 7th eval
7529 (in the order of execution).
7530 B</>I<pattern>B</> Search forwards for I<pattern>; final B</> is optional.
7531 B<?>I<pattern>B<?> Search backwards for I<pattern>; final B<?> is optional.
7532 B<L> List all breakpoints and actions.
7533 B<S> [[B<!>]I<pattern>] List subroutine names [not] matching I<pattern>.
7534 B<t> [I<n>] Toggle trace mode (to max I<n> levels below current stack depth) .
7535 B<t> [I<n>] I<expr> Trace through execution of I<expr>.
7536 B<b> [I<line>] [I<condition>]
7537 Set breakpoint; I<line> defaults to the current execution line;
7538 I<condition> breaks if it evaluates to true, defaults to '1'.
7539 B<b> I<subname> [I<condition>]
7540 Set breakpoint at first line of subroutine.
7541 B<b> I<\$var> Set breakpoint at first line of subroutine referenced by I<\$var>.
7542 B<b> B<load> I<filename> Set breakpoint on 'require'ing the given file.
7543 B<b> B<postpone> I<subname> [I<condition>]
7544 Set breakpoint at first line of subroutine after
7546 B<b> B<compile> I<subname>
7547 Stop after the subroutine is compiled.
7548 B<d> [I<line>] Delete the breakpoint for I<line>.
7549 B<D> Delete all breakpoints.
7550 B<a> [I<line>] I<command>
7551 Set an action to be done before the I<line> is executed;
7552 I<line> defaults to the current execution line.
7553 Sequence is: check for breakpoint/watchpoint, print line
7554 if necessary, do action, prompt user if necessary,
7556 B<a> [I<line>] Delete the action for I<line>.
7557 B<A> Delete all actions.
7558 B<W> I<expr> Add a global watch-expression.
7559 B<W> Delete all watch-expressions.
7560 B<V> [I<pkg> [I<vars>]] List some (default all) variables in package (default current).
7561 Use B<~>I<pattern> and B<!>I<pattern> for positive and negative regexps.
7562 B<X> [I<vars>] Same as \"B<V> I<currentpackage> [I<vars>]\".
7563 B<x> I<expr> Evals expression in list context, dumps the result.
7564 B<m> I<expr> Evals expression in list context, prints methods callable
7565 on the first element of the result.
7566 B<m> I<class> Prints methods callable via the given class.
7568 B<<> ? List Perl commands to run before each prompt.
7569 B<<> I<expr> Define Perl command to run before each prompt.
7570 B<<<> I<expr> Add to the list of Perl commands to run before each prompt.
7571 B<>> ? List Perl commands to run after each prompt.
7572 B<>> I<expr> Define Perl command to run after each prompt.
7573 B<>>B<>> I<expr> Add to the list of Perl commands to run after each prompt.
7574 B<{> I<db_command> Define debugger command to run before each prompt.
7575 B<{> ? List debugger commands to run before each prompt.
7576 B<{{> I<db_command> Add to the list of debugger commands to run before each prompt.
7577 B<$prc> I<number> Redo a previous command (default previous command).
7578 B<$prc> I<-number> Redo number'th-to-last command.
7579 B<$prc> I<pattern> Redo last command that started with I<pattern>.
7580 See 'B<O> I<recallCommand>' too.
7581 B<$psh$psh> I<cmd> Run cmd in a subprocess (reads from DB::IN, writes to DB::OUT)"
7586 B<$psh> [I<cmd>] Run I<cmd> in subshell (forces \"\$SHELL -c 'cmd'\")."
7588 See 'B<O> I<shellBang>' too.
7589 B<source> I<file> Execute I<file> containing debugger commands (may nest).
7590 B<H> I<-number> Display last number commands (default all).
7591 B<p> I<expr> Same as \"I<print {DB::OUT} expr>\" in current package.
7592 B<|>I<dbcmd> Run debugger command, piping DB::OUT to current pager.
7593 B<||>I<dbcmd> Same as B<|>I<dbcmd> but DB::OUT is temporarilly select()ed as well.
7594 B<\=> [I<alias> I<value>] Define a command alias, or list current aliases.
7595 I<command> Execute as a perl statement in current package.
7596 B<v> Show versions of loaded modules.
7597 B<R> Pure-man-restart of debugger, some of debugger state
7598 and command-line options may be lost.
7599 Currently the following settings are preserved:
7600 history, breakpoints and actions, debugger B<O>ptions
7601 and the following command-line options: I<-w>, I<-I>, I<-e>.
7603 B<O> [I<opt>] ... Set boolean option to true
7604 B<O> [I<opt>B<?>] Query options
7605 B<O> [I<opt>B<=>I<val>] [I<opt>=B<\">I<val>B<\">] ...
7606 Set options. Use quotes if spaces in value.
7607 I<recallCommand>, I<ShellBang> chars used to recall command or spawn shell;
7608 I<pager> program for output of \"|cmd\";
7609 I<tkRunning> run Tk while prompting (with ReadLine);
7610 I<signalLevel> I<warnLevel> I<dieLevel> level of verbosity;
7611 I<inhibit_exit> Allows stepping off the end of the script.
7612 I<ImmediateStop> Debugger should stop as early as possible.
7613 I<RemotePort> Remote hostname:port for remote debugging
7614 The following options affect what happens with B<V>, B<X>, and B<x> commands:
7615 I<arrayDepth>, I<hashDepth> print only first N elements ('' for all);
7616 I<compactDump>, I<veryCompact> change style of array and hash dump;
7617 I<globPrint> whether to print contents of globs;
7618 I<DumpDBFiles> dump arrays holding debugged files;
7619 I<DumpPackages> dump symbol tables of packages;
7620 I<DumpReused> dump contents of \"reused\" addresses;
7621 I<quote>, I<HighBit>, I<undefPrint> change style of string dump;
7622 I<bareStringify> Do not print the overload-stringified value;
7623 Other options include:
7624 I<PrintRet> affects printing of return value after B<r> command,
7625 I<frame> affects printing messages on subroutine entry/exit.
7626 I<AutoTrace> affects printing messages on possible breaking points.
7627 I<maxTraceLen> gives max length of evals/args listed in stack trace.
7628 I<ornaments> affects screen appearance of the command line.
7629 I<CreateTTY> bits control attempts to create a new TTY on events:
7630 1: on fork() 2: debugger is started inside debugger
7632 During startup options are initialized from \$ENV{PERLDB_OPTS}.
7633 You can put additional initialization options I<TTY>, I<noTTY>,
7634 I<ReadLine>, I<NonStop>, and I<RemotePort> there (or use
7635 B<R> after you set them).
7637 B<q> or B<^D> Quit. Set B<\$DB::finished = 0> to debug global destruction.
7638 B<h> [I<db_command>] Get help [on a specific debugger command], enter B<|h> to page.
7639 B<h h> Summary of debugger commands.
7640 B<$doccmd> I<manpage> Runs the external doc viewer B<$doccmd> command on the
7641 named Perl I<manpage>, or on B<$doccmd> itself if omitted.
7642 Set B<\$DB::doccmd> to change viewer.
7644 Type '|h' for a paged display if this was too hard to read.
7646 "; # Fix balance of vi % matching: }}}}
7648 # note: tabs in the following section are not-so-helpful
7649 $pre580_summary = <<"END_SUM";
7650 I<List/search source lines:> I<Control script execution:>
7651 B<l> [I<ln>|I<sub>] List source code B<T> Stack trace
7652 B<-> or B<.> List previous/current line B<s> [I<expr>] Single step [in expr]
7653 B<w> [I<line>] List around line B<n> [I<expr>] Next, steps over subs
7654 B<f> I<filename> View source in file <B<CR>/B<Enter>> Repeat last B<n> or B<s>
7655 B</>I<pattern>B</> B<?>I<patt>B<?> Search forw/backw B<r> Return from subroutine
7656 B<v> Show versions of modules B<c> [I<ln>|I<sub>] Continue until position
7657 I<Debugger controls:> B<L> List break/watch/actions
7658 B<O> [...] Set debugger options B<t> [I<expr>] Toggle trace [trace expr]
7659 B<<>[B<<>]|B<{>[B<{>]|B<>>[B<>>] [I<cmd>] Do pre/post-prompt B<b> [I<ln>|I<event>|I<sub>] [I<cnd>] Set breakpoint
7660 B<$prc> [I<N>|I<pat>] Redo a previous command B<d> [I<ln>] or B<D> Delete a/all breakpoints
7661 B<H> [I<-num>] Display last num commands B<a> [I<ln>] I<cmd> Do cmd before line
7662 B<=> [I<a> I<val>] Define/list an alias B<W> I<expr> Add a watch expression
7663 B<h> [I<db_cmd>] Get help on command B<A> or B<W> Delete all actions/watch
7664 B<|>[B<|>]I<db_cmd> Send output to pager B<$psh>\[B<$psh>\] I<syscmd> Run cmd in a subprocess
7665 B<q> or B<^D> Quit B<R> Attempt a restart
7666 I<Data Examination:> B<expr> Execute perl code, also see: B<s>,B<n>,B<t> I<expr>
7667 B<x>|B<m> I<expr> Evals expr in list context, dumps the result or lists methods.
7668 B<p> I<expr> Print expression (uses script's current package).
7669 B<S> [[B<!>]I<pat>] List subroutine names [not] matching pattern
7670 B<V> [I<Pk> [I<Vars>]] List Variables in Package. Vars can be ~pattern or !pattern.
7671 B<X> [I<Vars>] Same as \"B<V> I<current_package> [I<Vars>]\".
7672 B<y> [I<n> [I<Vars>]] List lexicals in higher scope <n>. Vars same as B<V>.
7673 For more help, type B<h> I<cmd_letter>, or run B<$doccmd perldebug> for all docs.
7676 # ')}}; # Fix balance of vi % matching
7678 } ## end sub sethelp
7680 =head2 C<print_help()>
7682 Most of what C<print_help> does is just text formatting. It finds the
7683 C<B> and C<I> ornaments, cleans them off, and substitutes the proper
7684 terminal control characters to simulate them (courtesy of
7685 C<Term::ReadLine::TermCap>).
7692 # Restore proper alignment destroyed by eeevil I<> and B<>
7693 # ornaments: A pox on both their houses!
7695 # A help command will have everything up to and including
7696 # the first tab sequence padded into a field 16 (or if indented 20)
7697 # wide. If it's wider than that, an extra space will be added.
7699 ^ # only matters at start of line
7700 ( \040{4} | \t )* # some subcommands are indented
7701 ( < ? # so <CR> works
7702 [BI] < [^\t\n] + ) # find an eeevil ornament
7703 ( \t+ ) # original separation, discarded
7704 ( .* ) # this will now start (no earlier) than
7707 my($leadwhite, $command, $midwhite, $text) = ($1, $2, $3, $4);
7708 my $clean = $command;
7709 $clean =~ s/[BI]<([^>]*)>/$1/g;
7711 # replace with this whole string:
7712 ($leadwhite ? " " x 4 : "")
7714 . ((" " x (16 + ($leadwhite ? 4 : 0) - length($clean))) || " ")
7719 s{ # handle bold ornaments
7720 B < ( [^>] + | > ) >
7722 $Term::ReadLine::TermCap::rl_term_set[2]
7724 . $Term::ReadLine::TermCap::rl_term_set[3]
7727 s{ # handle italic ornaments
7728 I < ( [^>] + | > ) >
7730 $Term::ReadLine::TermCap::rl_term_set[0]
7732 . $Term::ReadLine::TermCap::rl_term_set[1]
7737 } ## end sub print_help
7741 This routine does a lot of gyrations to be sure that the pager is C<less>.
7742 It checks for C<less> masquerading as C<more> and records the result in
7743 C<$fixed_less> so we don't have to go through doing the stats again.
7749 # We already know if this is set.
7750 return if $fixed_less;
7752 # Pager is less for sure.
7753 my $is_less = $pager =~ /\bless\b/;
7754 if ( $pager =~ /\bmore\b/ ) {
7756 # Nope, set to more. See what's out there.
7757 my @st_more = stat('/usr/bin/more');
7758 my @st_less = stat('/usr/bin/less');
7760 # is it really less, pretending to be more?
7763 && $st_more[0] == $st_less[0]
7764 && $st_more[1] == $st_less[1];
7765 } ## end if ($pager =~ /\bmore\b/)
7767 # changes environment!
7768 # 'r' added so we don't do (slow) stats again.
7769 $fixed_less = 1 if $is_less;
7770 } ## end sub fix_less
7772 =head1 DIE AND WARN MANAGEMENT
7776 C<diesignal> is a just-drop-dead C<die> handler. It's most useful when trying
7777 to debug a debugger problem.
7779 It does its best to report the error that occurred, and then forces the
7780 program, debugger, and everything to die.
7786 # No entry/exit messages.
7789 # No return value prints.
7792 # set the abort signal handling to the default (just terminate).
7793 $SIG{'ABRT'} = 'DEFAULT';
7795 # If we enter the signal handler recursively, kill myself with an
7796 # abort signal (so we just terminate).
7797 kill 'ABRT', $$ if $panic++;
7799 # If we can show detailed info, do so.
7800 if ( defined &Carp::longmess ) {
7802 # Don't recursively enter the warn handler, since we're carping.
7803 local $SIG{__WARN__} = '';
7805 # Skip two levels before reporting traceback: we're skipping
7806 # mydie and confess.
7807 local $Carp::CarpLevel = 2; # mydie + confess
7809 # Tell us all about it.
7810 &warn( Carp::longmess("Signal @_") );
7813 # No Carp. Tell us about the signal as best we can.
7816 print $DB::OUT "Got signal @_\n";
7821 } ## end sub diesignal
7825 The debugger's own default C<$SIG{__WARN__}> handler. We load C<Carp> to
7826 be able to get a stack trace, and output the warning message vi C<DB::dbwarn()>.
7832 # No entry/exit trace.
7835 # No return value printing.
7838 # Turn off warn and die handling to prevent recursive entries to this
7840 local $SIG{__WARN__} = '';
7841 local $SIG{__DIE__} = '';
7843 # Load Carp if we can. If $^S is false (current thing being compiled isn't
7844 # done yet), we may not be able to do a require.
7845 eval { require Carp }
7846 if defined $^S; # If error/warning during compilation,
7847 # require may be broken.
7849 # Use the core warn() unless Carp loaded OK.
7851 "\nCannot print stack trace, load with -MCarp option to see stack" ),
7853 unless defined &Carp::longmess;
7855 # Save the current values of $single and $trace, and then turn them off.
7856 my ( $mysingle, $mytrace ) = ( $single, $trace );
7860 # We can call Carp::longmess without its being "debugged" (which we
7861 # don't want - we just want to use it!). Capture this for later.
7862 my $mess = Carp::longmess(@_);
7864 # Restore $single and $trace to their original values.
7865 ( $single, $trace ) = ( $mysingle, $mytrace );
7867 # Use the debugger's own special way of printing warnings to print
7868 # the stack trace message.
7874 The debugger's own C<$SIG{__DIE__}> handler. Handles providing a stack trace
7875 by loading C<Carp> and calling C<Carp::longmess()> to get it. We turn off
7876 single stepping and tracing during the call to C<Carp::longmess> to avoid
7877 debugging it - we just want to use it.
7879 If C<dieLevel> is zero, we let the program being debugged handle the
7880 exceptions. If it's 1, you get backtraces for any exception. If it's 2,
7881 the debugger takes over all exception handling, printing a backtrace and
7882 displaying the exception via its C<dbwarn()> routine.
7889 local $SIG{__DIE__} = '';
7890 local $SIG{__WARN__} = '';
7894 if ( $dieLevel > 2 ) {
7895 local $SIG{__WARN__} = \&dbwarn;
7896 &warn(@_); # Yell no matter what
7899 if ( $dieLevel < 2 ) {
7900 die @_ if $^S; # in eval propagate
7903 # The code used to check $^S to see if compilation of the current thing
7904 # hadn't finished. We don't do it anymore, figuring eval is pretty stable.
7905 eval { require Carp };
7908 "\nCannot print stack trace, load with -MCarp option to see stack" )
7909 unless defined &Carp::longmess;
7911 # We do not want to debug this chunk (automatic disabling works
7912 # inside DB::DB, but not in Carp). Save $single and $trace, turn them off,
7913 # get the stack trace from Carp::longmess (if possible), restore $signal
7914 # and $trace, and then die with the stack trace.
7915 my ( $mysingle, $mytrace ) = ( $single, $trace );
7921 package Carp; # Do not include us in the list
7922 eval { $mess = Carp::longmess(@_); };
7924 ( $single, $trace ) = ( $mysingle, $mytrace );
7928 =head2 C<warnlevel()>
7930 Set the C<$DB::warnLevel> variable that stores the value of the
7931 C<warnLevel> option. Calling C<warnLevel()> with a positive value
7932 results in the debugger taking over all warning handlers. Setting
7933 C<warnLevel> to zero leaves any warning handlers set up by the program
7934 being debugged in place.
7940 $prevwarn = $SIG{__WARN__} unless $warnLevel;
7943 $SIG{__WARN__} = \&DB::dbwarn;
7946 $SIG{__WARN__} = $prevwarn;
7948 undef $SIG{__WARN__};
7952 } ## end sub warnLevel
7956 Similar to C<warnLevel>. Non-zero values for C<dieLevel> result in the
7957 C<DB::dbdie()> function overriding any other C<die()> handler. Setting it to
7958 zero lets you use your own C<die()> handler.
7965 $prevdie = $SIG{__DIE__} unless $dieLevel;
7969 # Always set it to dbdie() for non-zero values.
7970 $SIG{__DIE__} = \&DB::dbdie; # if $dieLevel < 2;
7972 # No longer exists, so don't try to use it.
7973 #$SIG{__DIE__} = \&DB::diehard if $dieLevel >= 2;
7975 # If we've finished initialization, mention that stack dumps
7976 # are enabled, If dieLevel is 1, we won't stack dump if we die
7978 print $OUT "Stack dump during die enabled",
7979 ( $dieLevel == 1 ? " outside of evals" : "" ), ".\n"
7982 # XXX This is probably obsolete, given that diehard() is gone.
7983 print $OUT "Dump printed too.\n" if $dieLevel > 2;
7984 } ## end if ($dieLevel)
7986 # Put the old one back if there was one.
7988 $SIG{__DIE__} = $prevdie;
7989 print $OUT "Default die handler restored.\n";
7991 undef $SIG{__DIE__};
7992 print $OUT "Die handler removed.\n";
7996 } ## end sub dieLevel
7998 =head2 C<signalLevel>
8000 Number three in a series: set C<signalLevel> to zero to keep your own
8001 signal handler for C<SIGSEGV> and/or C<SIGBUS>. Otherwise, the debugger
8002 takes over and handles them with C<DB::diesignal()>.
8008 $prevsegv = $SIG{SEGV} unless $signalLevel;
8009 $prevbus = $SIG{BUS} unless $signalLevel;
8010 $signalLevel = shift;
8012 $SIG{SEGV} = \&DB::diesignal;
8013 $SIG{BUS} = \&DB::diesignal;
8016 $SIG{SEGV} = $prevsegv;
8017 $SIG{BUS} = $prevbus;
8021 } ## end sub signalLevel
8023 =head1 SUBROUTINE DECODING SUPPORT
8025 These subroutines are used during the C<x> and C<X> commands to try to
8026 produce as much information as possible about a code reference. They use
8027 L<Devel::Peek> to try to find the glob in which this code reference lives
8028 (if it does) - this allows us to actually code references which correspond
8029 to named subroutines (including those aliased via glob assignment).
8031 =head2 C<CvGV_name()>
8033 Wrapper for C<CvGV_name_or_bust>; tries to get the name of a reference
8034 via that routine. If this fails, return the reference again (when the
8035 reference is stringified, it'll come out as C<SOMETHING(0x...)>).
8041 my $name = CvGV_name_or_bust($in);
8042 defined $name ? $name : $in;
8045 =head2 C<CvGV_name_or_bust> I<coderef>
8047 Calls L<Devel::Peek> to try to find the glob the ref lives in; returns
8048 C<undef> if L<Devel::Peek> can't be loaded, or if C<Devel::Peek::CvGV> can't
8049 find a glob for this ref.
8051 Returns C<< I<package>::I<glob name> >> if the code ref is found in a glob.
8055 sub CvGV_name_or_bust {
8057 return if $skipCvGV; # Backdoor to avoid problems if XS broken...
8058 return unless ref $in;
8059 $in = \&$in; # Hard reference...
8060 eval { require Devel::Peek; 1 } or return;
8061 my $gv = Devel::Peek::CvGV($in) or return;
8062 *$gv{PACKAGE} . '::' . *$gv{NAME};
8063 } ## end sub CvGV_name_or_bust
8067 A utility routine used in various places; finds the file where a subroutine
8068 was defined, and returns that filename and a line-number range.
8070 Tries to use C<@sub> first; if it can't find it there, it tries building a
8071 reference to the subroutine and uses C<CvGV_name_or_bust> to locate it,
8072 loading it into C<@sub> as a side effect (XXX I think). If it can't find it
8073 this way, it brute-force searches C<%sub>, checking for identical references.
8080 return unless defined &$subr;
8081 my $name = CvGV_name_or_bust($subr);
8083 $data = $sub{$name} if defined $name;
8084 return $data if defined $data;
8087 $subr = \&$subr; # Hard reference
8090 $s = $_, last if $subr eq \&$_;
8094 } ## end sub find_sub
8098 A subroutine that uses the utility function C<methods_via> to find all the
8099 methods in the class corresponding to the current reference and in
8106 # Figure out the class - either this is the class or it's a reference
8107 # to something blessed into that class.
8109 $class = ref $class if ref $class;
8113 # Show the methods that this class has.
8114 methods_via( $class, '', 1 );
8116 # Show the methods that UNIVERSAL has.
8117 methods_via( 'UNIVERSAL', 'UNIVERSAL', 0 );
8118 } ## end sub methods
8120 =head2 C<methods_via($class, $prefix, $crawl_upward)>
8122 C<methods_via> does the work of crawling up the C<@ISA> tree and reporting
8123 all the parent class methods. C<$class> is the name of the next class to
8124 try; C<$prefix> is the message prefix, which gets built up as we go up the
8125 C<@ISA> tree to show parentage; C<$crawl_upward> is 1 if we should try to go
8126 higher in the C<@ISA> tree, 0 if we should stop.
8132 # If we've processed this class already, just quit.
8134 return if $seen{$class}++;
8136 # This is a package that is contributing the methods we're about to print.
8138 my $prepend = $prefix ? "via $prefix: " : '';
8141 # Extract from all the symbols in this class.
8142 while (my ($name, $glob) = each %{"${class}::"}) {
8143 # references directly in the symbol table are Proxy Constant
8144 # Subroutines, and are by their very nature defined
8145 # Otherwise, check if the thing is a typeglob, and if it is, it decays
8146 # to a subroutine reference, which can be tested by defined.
8147 # $glob might also be the value -1 (from sub foo;)
8148 # or (say) '$$' (from sub foo ($$);)
8149 # \$glob will be SCALAR in both cases.
8150 if ((ref $glob || ($glob && ref \$glob eq 'GLOB' && defined &$glob))
8151 && !$seen{$name}++) {
8152 push @to_print, "$prepend$name\n";
8159 print $DB::OUT $_ foreach sort @to_print;
8162 # If the $crawl_upward argument is false, just quit here.
8163 return unless shift;
8165 # $crawl_upward true: keep going up the tree.
8166 # Find all the classes this one is a subclass of.
8167 for $name ( @{"${class}::ISA"} ) {
8169 # Set up the new prefix.
8170 $prepend = $prefix ? $prefix . " -> $name" : $name;
8172 # Crawl up the tree and keep trying to crawl up.
8173 methods_via( $name, $prepend, 1 );
8175 } ## end sub methods_via
8177 =head2 C<setman> - figure out which command to use to show documentation
8179 Just checks the contents of C<$^O> and sets the C<$doccmd> global accordingly.
8184 $doccmd = $^O !~ /^(?:MSWin32|VMS|os2|dos|amigaos|riscos|NetWare)\z/s
8185 ? "man" # O Happy Day!
8186 : "perldoc"; # Alas, poor unfortunates
8189 =head2 C<runman> - run the appropriate command to show documentation
8191 Accepts a man page name; runs the appropriate command to display it (set up
8192 during debugger initialization). Uses C<DB::system> to avoid mucking up the
8193 program's STDIN and STDOUT.
8200 &system("$doccmd $doccmd");
8204 # this way user can override, like with $doccmd="man -Mwhatever"
8205 # or even just "man " to disable the path check.
8206 unless ( $doccmd eq 'man' ) {
8207 &system("$doccmd $page");
8211 $page = 'perl' if lc($page) eq 'help';
8214 my $man1dir = $Config::Config{'man1dir'};
8215 my $man3dir = $Config::Config{'man3dir'};
8216 for ( $man1dir, $man3dir ) { s#/[^/]*\z## if /\S/ }
8218 $manpath .= "$man1dir:" if $man1dir =~ /\S/;
8219 $manpath .= "$man3dir:" if $man3dir =~ /\S/ && $man1dir ne $man3dir;
8220 chop $manpath if $manpath;
8222 # harmless if missing, I figure
8223 my $oldpath = $ENV{MANPATH};
8224 $ENV{MANPATH} = $manpath if $manpath;
8225 my $nopathopt = $^O =~ /dunno what goes here/;
8230 # I just *know* there are men without -M
8231 ( ( $manpath && !$nopathopt ) ? ( "-M", $manpath ) : () ),
8236 unless ( $page =~ /^perl\w/ ) {
8237 # do it this way because its easier to slurp in to keep up to date - clunky though.
8372 if (grep { $page eq $_ } @pods) {
8374 CORE::system( $doccmd,
8375 ( ( $manpath && !$nopathopt ) ? ( "-M", $manpath ) : () ),
8377 } ## end if (grep { $page eq $_...
8378 } ## end unless ($page =~ /^perl\w/)
8379 } ## end if (CORE::system($doccmd...
8380 if ( defined $oldpath ) {
8381 $ENV{MANPATH} = $manpath;
8384 delete $ENV{MANPATH};
8388 #use Carp; # This did break, left for debugging
8390 =head1 DEBUGGER INITIALIZATION - THE SECOND BEGIN BLOCK
8392 Because of the way the debugger interface to the Perl core is designed, any
8393 debugger package globals that C<DB::sub()> requires have to be defined before
8394 any subroutines can be called. These are defined in the second C<BEGIN> block.
8396 This block sets things up so that (basically) the world is sane
8397 before the debugger starts executing. We set up various variables that the
8398 debugger has to have set up before the Perl core starts running:
8404 The debugger's own filehandles (copies of STD and STDOUT for now).
8408 Characters for shell escapes, the recall command, and the history command.
8412 The maximum recursion depth.
8416 The size of a C<w> command's window.
8420 The before-this-line context to be printed in a C<v> (view a window around this line) command.
8424 The fact that we're not in a sub at all right now.
8428 The default SIGINT handler for the debugger.
8432 The appropriate value of the flag in C<$^D> that says the debugger is running
8436 The current debugger recursion level
8440 The list of postponed items and the C<$single> stack (XXX define this)
8444 That we want no return values and no subroutine entry/exit trace.
8450 # The following BEGIN is very handy if debugger goes havoc, debugging debugger?
8452 BEGIN { # This does not compile, alas. (XXX eh?)
8453 $IN = \*STDIN; # For bugs before DB::OUT has been opened
8454 $OUT = \*STDERR; # For errors before DB::OUT has been opened
8456 # Define characters used by command parsing.
8457 $sh = '!'; # Shell escape (does not work)
8458 $rc = ','; # Recall command (does not work)
8459 @hist = ('?'); # Show history (does not work)
8460 @truehist = (); # Can be saved for replay (per session)
8462 # This defines the point at which you get the 'deep recursion'
8463 # warning. It MUST be defined or the debugger will not load.
8466 # Number of lines around the current one that are shown in the
8470 # How much before-the-current-line context the 'v' command should
8471 # use in calculating the start of the window it will display.
8474 # We're not in any sub yet, but we need this to be a defined value.
8477 # Set up the debugger's interrupt handler. It simply sets a flag
8478 # ($signal) that DB::DB() will check before each command is executed.
8479 $SIG{INT} = \&DB::catch;
8481 # The following lines supposedly, if uncommented, allow the debugger to
8482 # debug itself. Perhaps we can try that someday.
8483 # This may be enabled to debug debugger:
8484 #$warnLevel = 1 unless defined $warnLevel;
8485 #$dieLevel = 1 unless defined $dieLevel;
8486 #$signalLevel = 1 unless defined $signalLevel;
8488 # This is the flag that says "a debugger is running, please call
8489 # DB::DB and DB::sub". We will turn it on forcibly before we try to
8490 # execute anything in the user's context, because we always want to
8492 $db_stop = 0; # Compiler warning ...
8493 $db_stop = 1 << 30; # ... because this is only used in an eval() later.
8495 # This variable records how many levels we're nested in debugging. Used
8496 # Used in the debugger prompt, and in determining whether it's all over or
8498 $level = 0; # Level of recursive debugging
8500 # "Triggers bug (?) in perl if we postpone this until runtime."
8501 # XXX No details on this yet, or whether we should fix the bug instead
8502 # of work around it. Stay tuned.
8503 @postponed = @stack = (0);
8505 # Used to track the current stack depth using the auto-stacked-variable
8507 $stack_depth = 0; # Localized repeatedly; simple way to track $#stack
8509 # Don't print return values on exiting a subroutine.
8512 # No extry/exit tracing.
8517 BEGIN { $^W = $ini_warn; } # Switch warnings back
8519 =head1 READLINE SUPPORT - COMPLETION FUNCTION
8523 C<readline> support - adds command completion to basic C<readline>.
8525 Returns a list of possible completions to C<readline> when invoked. C<readline>
8526 will print the longest common substring following the text already entered.
8528 If there is only a single possible completion, C<readline> will use it in full.
8530 This code uses C<map> and C<grep> heavily to create lists of possible
8531 completion. Think LISP in this section.
8537 # Specific code for b c l V m f O, &blah, $blah, @blah, %blah
8538 # $text is the text to be completed.
8539 # $line is the incoming line typed by the user.
8540 # $start is the start of the text to be completed in the incoming line.
8541 my ( $text, $line, $start ) = @_;
8543 # Save the initial text.
8544 # The search pattern is current package, ::, extract the next qualifier
8545 # Prefix and pack are set to undef.
8546 my ( $itext, $search, $prefix, $pack ) =
8547 ( $text, "^\Q${'package'}::\E([^:]+)\$" );
8549 =head3 C<b postpone|compile>
8555 Find all the subroutines that might match in this package
8559 Add C<postpone>, C<load>, and C<compile> as possibles (we may be completing the keyword itself)
8563 Include all the rest of the subs that are known
8567 C<grep> out the ones that match the text we have so far
8571 Return this as the list of possible completions
8577 return sort grep /^\Q$text/, ( keys %sub ),
8578 qw(postpone load compile), # subroutines
8579 ( map { /$search/ ? ($1) : () } keys %sub )
8580 if ( substr $line, 0, $start ) =~ /^\|*[blc]\s+((postpone|compile)\s+)?$/;
8584 Get all the possible files from C<@INC> as it currently stands and
8585 select the ones that match the text so far.
8589 return sort grep /^\Q$text/, values %INC # files
8590 if ( substr $line, 0, $start ) =~ /^\|*b\s+load\s+$/;
8592 =head3 C<V> (list variable) and C<m> (list modules)
8594 There are two entry points for these commands:
8596 =head4 Unqualified package names
8598 Get the top-level packages and grab everything that matches the text
8599 so far. For each match, recursively complete the partial packages to
8600 get all possible matching packages. Return this sorted list.
8604 return sort map { ( $_, db_complete( $_ . "::", "V ", 2 ) ) }
8605 grep /^\Q$text/, map { /^(.*)::$/ ? ($1) : () } keys %:: # top-packages
8606 if ( substr $line, 0, $start ) =~ /^\|*[Vm]\s+$/ and $text =~ /^\w*$/;
8608 =head4 Qualified package names
8610 Take a partially-qualified package and find all subpackages for it
8611 by getting all the subpackages for the package so far, matching all
8612 the subpackages against the text, and discarding all of them which
8613 start with 'main::'. Return this list.
8617 return sort map { ( $_, db_complete( $_ . "::", "V ", 2 ) ) }
8618 grep !/^main::/, grep /^\Q$text/,
8619 map { /^(.*)::$/ ? ( $prefix . "::$1" ) : () } keys %{ $prefix . '::' }
8620 if ( substr $line, 0, $start ) =~ /^\|*[Vm]\s+$/
8621 and $text =~ /^(.*[^:])::?(\w*)$/
8624 =head3 C<f> - switch files
8626 Here, we want to get a fully-qualified filename for the C<f> command.
8631 =item 1. The original source file itself
8633 =item 2. A file from C<@INC>
8635 =item 3. An C<eval> (the debugger gets a C<(eval N)> fake file for each C<eval>).
8641 if ( $line =~ /^\|*f\s+(.*)/ ) { # Loaded files
8642 # We might possibly want to switch to an eval (which has a "filename"
8643 # like '(eval 9)'), so we may need to clean up the completion text
8644 # before proceeding.
8645 $prefix = length($1) - length($text);
8650 Under the debugger, source files are represented as C<_E<lt>/fullpath/to/file>
8651 (C<eval>s are C<_E<lt>(eval NNN)>) keys in C<%main::>. We pull all of these
8652 out of C<%main::>, add the initial source file, and extract the ones that
8653 match the completion text so far.
8658 map { substr $_, 2 + $prefix } grep /^_<\Q$text/, ( keys %main:: ),
8660 } ## end if ($line =~ /^\|*f\s+(.*)/)
8662 =head3 Subroutine name completion
8664 We look through all of the defined subs (the keys of C<%sub>) and
8665 return both all the possible matches to the subroutine name plus
8666 all the matches qualified to the current package.
8670 if ( ( substr $text, 0, 1 ) eq '&' ) { # subroutines
8671 $text = substr $text, 1;
8673 return sort map "$prefix$_", grep /^\Q$text/, ( keys %sub ),
8675 map { /$search/ ? ($1) : () }
8678 } ## end if ((substr $text, 0, ...
8680 =head3 Scalar, array, and hash completion: partially qualified package
8682 Much like the above, except we have to do a little more cleanup:
8686 if ( $text =~ /^[\$@%](.*)::(.*)/ ) { # symbols in a package
8694 Determine the package that the symbol is in. Put it in C<::> (effectively C<main::>) if no package is specified.
8698 $pack = ( $1 eq 'main' ? '' : $1 ) . '::';
8704 Figure out the prefix vs. what needs completing.
8708 $prefix = ( substr $text, 0, 1 ) . $1 . '::';
8715 Look through all the symbols in the package. C<grep> out all the possible hashes/arrays/scalars, and then C<grep> the possible matches out of those. C<map> the prefix onto all the possibilities.
8719 my @out = map "$prefix$_", grep /^\Q$text/, grep /^_?[a-zA-Z]/,
8726 If there's only one hit, and it's a package qualifier, and it's not equal to the initial text, re-complete it using the symbol we actually found.
8730 if ( @out == 1 and $out[0] =~ /::$/ and $out[0] ne $itext ) {
8731 return db_complete( $out[0], $line, $start );
8734 # Return the list of possibles.
8737 } ## end if ($text =~ /^[\$@%](.*)::(.*)/)
8743 =head3 Symbol completion: current package or package C<main>.
8747 if ( $text =~ /^[\$@%]/ ) { # symbols (in $package + packages in main)
8754 If it's C<main>, delete main to just get C<::> leading.
8758 $pack = ( $package eq 'main' ? '' : $package ) . '::';
8764 We set the prefix to the item's sigil, and trim off the sigil to get the text to be completed.
8768 $prefix = substr $text, 0, 1;
8769 $text = substr $text, 1;
8777 We look for the lexical scope above DB::DB and auto-complete lexical variables
8778 if PadWalker could be loaded.
8782 if (not $text =~ /::/ and eval { require PadWalker } ) {
8785 my @info = caller($level);
8789 last if $info[3] eq 'DB::DB';
8792 my $lexicals = PadWalker::peek_my($level);
8793 push @out, grep /^\Q$prefix$text/, keys %$lexicals;
8801 If the package is C<::> (C<main>), create an empty list; if it's something else, create a list of all the packages known. Append whichever list to a list of all the possible symbols in the current package. C<grep> out the matches to the text entered so far, then C<map> the prefix back onto the symbols.
8805 push @out, map "$prefix$_", grep /^\Q$text/,
8806 ( grep /^_?[a-zA-Z]/, keys %$pack ),
8807 ( $pack eq '::' ? () : ( grep /::$/, keys %:: ) );
8811 If there's only one hit, it's a package qualifier, and it's not equal to the initial text, recomplete using this symbol.
8817 if ( @out == 1 and $out[0] =~ /::$/ and $out[0] ne $itext ) {
8818 return db_complete( $out[0], $line, $start );
8821 # Return the list of possibles.
8823 } ## end if ($text =~ /^[\$@%]/)
8827 We use C<option_val()> to look up the current value of the option. If there's
8828 only a single value, we complete the command in such a way that it is a
8829 complete command for setting the option in question. If there are multiple
8830 possible values, we generate a command consisting of the option plus a trailing
8831 question mark, which, if executed, will list the current value of the option.
8835 if ( ( substr $line, 0, $start ) =~ /^\|*[oO]\b.*\s$/ )
8836 { # Options after space
8837 # We look for the text to be matched in the list of possible options,
8838 # and fetch the current value.
8839 my @out = grep /^\Q$text/, @options;
8840 my $val = option_val( $out[0], undef );
8842 # Set up a 'query option's value' command.
8844 if ( not defined $val or $val =~ /[\n\r]/ ) {
8846 # There's really nothing else we can do.
8849 # We have a value. Create a proper option-setting command.
8850 elsif ( $val =~ /\s/ ) {
8852 # XXX This may be an extraneous variable.
8855 # We'll want to quote the string (because of the embedded
8856 # whtespace), but we want to make sure we don't end up with
8857 # mismatched quote characters. We try several possibilities.
8858 foreach $l ( split //, qq/\"\'\#\|/ ) {
8860 # If we didn't find this quote character in the value,
8861 # quote it using this quote character.
8862 $out = "$l$val$l ", last if ( index $val, $l ) == -1;
8864 } ## end elsif ($val =~ /\s/)
8866 # Don't need any quotes.
8871 # If there were multiple possible values, return '? ', which
8872 # makes the command into a query command. If there was just one,
8873 # have readline append that.
8874 $rl_attribs->{completer_terminator_character} =
8875 ( @out == 1 ? $out : '? ' );
8877 # Return list of possibilities.
8879 } ## end if ((substr $line, 0, ...
8881 =head3 Filename completion
8883 For entering filenames. We simply call C<readline>'s C<filename_list()>
8884 method with the completion text to get the possible completions.
8888 return $term->filename_list($text); # filenames
8890 } ## end sub db_complete
8892 =head1 MISCELLANEOUS SUPPORT FUNCTIONS
8894 Functions that possibly ought to be somewhere else.
8904 print $OUT "Use 'q' to quit or 'R' to restart. 'h q' for details.\n";
8909 If we have $ini_pids, save it in the environment; else remove it from the
8910 environment. Used by the C<R> (restart) command.
8915 if ( defined($ini_pids) ) {
8916 $ENV{PERLDB_PIDS} = $ini_pids;
8919 delete( $ENV{PERLDB_PIDS} );
8921 } ## end sub clean_ENV
8923 # PERLDBf_... flag names from perl.h
8924 our ( %DollarCaretP_flags, %DollarCaretP_flags_r );
8927 %DollarCaretP_flags = (
8928 PERLDBf_SUB => 0x01, # Debug sub enter/exit
8929 PERLDBf_LINE => 0x02, # Keep line #
8930 PERLDBf_NOOPT => 0x04, # Switch off optimizations
8931 PERLDBf_INTER => 0x08, # Preserve more data
8932 PERLDBf_SUBLINE => 0x10, # Keep subr source lines
8933 PERLDBf_SINGLE => 0x20, # Start with single-step on
8934 PERLDBf_NONAME => 0x40, # For _SUB: no name of the subr
8935 PERLDBf_GOTO => 0x80, # Report goto: call DB::goto
8936 PERLDBf_NAMEEVAL => 0x100, # Informative names for evals
8937 PERLDBf_NAMEANON => 0x200, # Informative names for anon subs
8938 PERLDBf_SAVESRC => 0x400, # Save source lines into @{"_<$filename"}
8939 PERLDB_ALL => 0x33f, # No _NONAME, _GOTO
8941 # PERLDBf_LINE also enables the actions of PERLDBf_SAVESRC, so the debugger
8942 # doesn't need to set it. It's provided for the benefit of profilers and
8943 # other code analysers.
8945 %DollarCaretP_flags_r = reverse %DollarCaretP_flags;
8948 sub parse_DollarCaretP_flags {
8953 foreach my $f ( split /\s*\|\s*/, $flags ) {
8955 if ( $f =~ /^0x([[:xdigit:]]+)$/ ) {
8958 elsif ( $f =~ /^(\d+)$/ ) {
8961 elsif ( $f =~ /^DEFAULT$/i ) {
8962 $value = $DollarCaretP_flags{PERLDB_ALL};
8965 $f =~ /^(?:PERLDBf_)?(.*)$/i;
8966 $value = $DollarCaretP_flags{ 'PERLDBf_' . uc($1) };
8967 unless ( defined $value ) {
8969 "Unrecognized \$^P flag '$f'!\n",
8970 "Acceptable flags are: "
8971 . join( ', ', sort keys %DollarCaretP_flags ),
8972 ", and hexadecimal and decimal numbers.\n"
8982 sub expand_DollarCaretP_flags {
8983 my $DollarCaretP = shift;
8986 my $n = ( 1 << $_ );
8987 ( $DollarCaretP & $n )
8988 ? ( $DollarCaretP_flags_r{$n}
8989 || sprintf( '0x%x', $n ) )
8993 return @bits ? join( '|', @bits ) : 0;
9000 Rerun the current session to:
9002 rerun current position
9004 rerun 4 command number 4
9006 rerun -4 current command minus 4 (go back 4 steps)
9008 Whether this always makes sense, in the current context is unknowable, and is
9009 in part left as a useful exercise for the reader. This sub returns the
9010 appropriate arguments to rerun the current session.
9017 pop(@truehist); # strim
9018 unless (defined $truehist[$i]) {
9019 print "Unable to return to non-existent command: $i\n";
9021 $#truehist = ($i < 0 ? $#truehist + $i : $i > 0 ? $i : $#truehist);
9022 my @temp = @truehist; # store
9023 push(@DB::typeahead, @truehist); # saved
9024 @truehist = @hist = (); # flush
9025 @args = &restart(); # setup
9026 &get_list("PERLDB_HIST"); # clean
9027 &set_list("PERLDB_HIST", @temp); # reset
9034 Restarting the debugger is a complex operation that occurs in several phases.
9035 First, we try to reconstruct the command line that was used to invoke Perl
9041 # I may not be able to resurrect you, but here goes ...
9043 "Warning: some settings and command-line options may be lost!\n";
9044 my ( @script, @flags, $cl );
9046 # If warn was on before, turn it on again.
9047 push @flags, '-w' if $ini_warn;
9049 # Rebuild the -I flags that were on the initial
9052 push @flags, '-I', $_;
9055 # Turn on taint if it was on before.
9056 push @flags, '-T' if ${^TAINT};
9058 # Arrange for setting the old INC:
9059 # Save the current @init_INC in the environment.
9060 set_list( "PERLDB_INC", @ini_INC );
9062 # If this was a perl one-liner, go to the "file"
9063 # corresponding to the one-liner read all the lines
9064 # out of it (except for the first one, which is going
9065 # to be added back on again when 'perl -d' runs: that's
9066 # the 'require perl5db.pl;' line), and add them back on
9067 # to the command line to be executed.
9069 for ( 1 .. $#{'::_<-e'} ) { # The first line is PERL5DB
9070 chomp( $cl = ${'::_<-e'}[$_] );
9071 push @script, '-e', $cl;
9073 } ## end if ($0 eq '-e')
9075 # Otherwise we just reuse the original name we had
9083 After the command line has been reconstructed, the next step is to save
9084 the debugger's status in environment variables. The C<DB::set_list> routine
9085 is used to save aggregate variables (both hashes and arrays); scalars are
9086 just popped into environment variables directly.
9090 # If the terminal supported history, grab it and
9091 # save that in the environment.
9092 set_list( "PERLDB_HIST",
9093 $term->Features->{getHistory}
9097 # Find all the files that were visited during this
9098 # session (i.e., the debugger had magic hashes
9099 # corresponding to them) and stick them in the environment.
9100 my @had_breakpoints = keys %had_breakpoints;
9101 set_list( "PERLDB_VISITED", @had_breakpoints );
9103 # Save the debugger options we chose.
9104 set_list( "PERLDB_OPT", %option );
9105 # set_list( "PERLDB_OPT", options2remember() );
9107 # Save the break-on-loads.
9108 set_list( "PERLDB_ON_LOAD", %break_on_load );
9112 The most complex part of this is the saving of all of the breakpoints. They
9113 can live in an awful lot of places, and we have to go through all of them,
9114 find the breakpoints, and then save them in the appropriate environment
9115 variable via C<DB::set_list>.
9119 # Go through all the breakpoints and make sure they're
9122 for ( 0 .. $#had_breakpoints ) {
9124 # We were in this file.
9125 my $file = $had_breakpoints[$_];
9127 # Grab that file's magic line hash.
9128 *dbline = $main::{ '_<' . $file };
9130 # Skip out if it doesn't exist, or if the breakpoint
9131 # is in a postponed file (we'll do postponed ones
9133 next unless %dbline or $postponed_file{$file};
9135 # In an eval. This is a little harder, so we'll
9136 # do more processing on that below.
9137 ( push @hard, $file ), next
9138 if $file =~ /^\(\w*eval/;
9140 # XXX I have no idea what this is doing. Yet.
9142 @add = %{ $postponed_file{$file} }
9143 if $postponed_file{$file};
9145 # Save the list of all the breakpoints for this file.
9146 set_list( "PERLDB_FILE_$_", %dbline, @add );
9147 } ## end for (0 .. $#had_breakpoints)
9149 # The breakpoint was inside an eval. This is a little
9150 # more difficult. XXX and I don't understand it.
9152 # Get over to the eval in question.
9153 *dbline = $main::{ '_<' . $_ };
9154 my ( $quoted, $sub, %subs, $line ) = quotemeta $_;
9155 for $sub ( keys %sub ) {
9156 next unless $sub{$sub} =~ /^$quoted:(\d+)-(\d+)$/;
9157 $subs{$sub} = [ $1, $2 ];
9161 "No subroutines in $_, ignoring breakpoints.\n";
9164 LINES: for $line ( keys %dbline ) {
9166 # One breakpoint per sub only:
9167 my ( $offset, $sub, $found );
9168 SUBS: for $sub ( keys %subs ) {
9171 $line # Not after the subroutine
9173 not defined $offset # Not caught
9179 $offset = $line - $subs{$sub}->[0];
9180 $offset = "+$offset", last SUBS
9182 } ## end if ($subs{$sub}->[1] >=...
9183 } ## end for $sub (keys %subs)
9184 if ( defined $offset ) {
9185 $postponed{$found} =
9186 "break $offset if $dbline{$line}";
9190 "Breakpoint in $_:$line ignored: after all the subroutines.\n";
9192 } ## end for $line (keys %dbline)
9193 } ## end for (@hard)
9195 # Save the other things that don't need to be
9197 set_list( "PERLDB_POSTPONE", %postponed );
9198 set_list( "PERLDB_PRETYPE", @$pretype );
9199 set_list( "PERLDB_PRE", @$pre );
9200 set_list( "PERLDB_POST", @$post );
9201 set_list( "PERLDB_TYPEAHEAD", @typeahead );
9203 # We are officially restarting.
9204 $ENV{PERLDB_RESTART} = 1;
9206 # We are junking all child debuggers.
9207 delete $ENV{PERLDB_PIDS}; # Restore ini state
9209 # Set this back to the initial pid.
9210 $ENV{PERLDB_PIDS} = $ini_pids if defined $ini_pids;
9214 After all the debugger status has been saved, we take the command we built up
9215 and then return it, so we can C<exec()> it. The debugger will spot the
9216 C<PERLDB_RESTART> environment variable and realize it needs to reload its state
9217 from the environment.
9221 # And run Perl again. Add the "-d" flag, all the
9222 # flags we built up, the script (whether a one-liner
9223 # or a file), add on the -emacs flag for a slave editor,
9224 # and then the old arguments.
9226 return ($^X, '-d', @flags, @script, ($slave_editor ? '-emacs' : ()), @ARGS);
9232 =head1 END PROCESSING - THE C<END> BLOCK
9234 Come here at the very end of processing. We want to go into a
9235 loop where we allow the user to enter commands and interact with the
9236 debugger, but we don't want anything else to execute.
9238 First we set the C<$finished> variable, so that some commands that
9239 shouldn't be run after the end of program quit working.
9241 We then figure out whether we're truly done (as in the user entered a C<q>
9242 command, or we finished execution while running nonstop). If we aren't,
9243 we set C<$single> to 1 (causing the debugger to get control again).
9245 We then call C<DB::fake::at_exit()>, which returns the C<Use 'q' to quit ...>
9246 message and returns control to the debugger. Repeat.
9248 When the user finally enters a C<q> command, C<$fall_off_end> is set to
9249 1 and the C<END> block simply exits with C<$single> set to 0 (don't
9250 break, run to completion.).
9255 $finished = 1 if $inhibit_exit; # So that some commands may be disabled.
9256 $fall_off_end = 1 unless $inhibit_exit;
9258 # Do not stop in at_exit() and destructors on exit:
9259 if ($fall_off_end or $runnonstop) {
9263 DB::fake::at_exit();
9267 =head1 PRE-5.8 COMMANDS
9269 Some of the commands changed function quite a bit in the 5.8 command
9270 realignment, so much so that the old code had to be replaced completely.
9271 Because we wanted to retain the option of being able to go back to the
9272 former command set, we moved the old code off to this section.
9274 There's an awful lot of duplicated code here. We've duplicated the
9275 comments to keep things clear.
9279 Does nothing. Used to I<turn off> commands.
9283 sub cmd_pre580_null {
9288 =head2 Old C<a> command.
9290 This version added actions if you supplied them, and deleted them
9299 # Argument supplied. Add the action.
9300 if ( $cmd =~ /^(\d*)\s*(.*)/ ) {
9302 # If the line isn't there, use the current line.
9306 # If there is an action ...
9309 # ... but the line isn't breakable, skip it.
9310 if ( $dbline[$i] == 0 ) {
9311 print $OUT "Line $i may not have an action.\n";
9315 # ... and the line is breakable:
9316 # Mark that there's an action in this file.
9317 $had_breakpoints{$filename} |= 2;
9319 # Delete any current action.
9320 $dbline{$i} =~ s/\0[^\0]*//;
9322 # Add the new action, continuing the line as needed.
9323 $dbline{$i} .= "\0" . action($j);
9325 } ## end if (length $j)
9327 # No action supplied.
9330 # Delete the action.
9331 $dbline{$i} =~ s/\0[^\0]*//;
9333 # Mark as having no break or action if nothing's left.
9334 delete $dbline{$i} if $dbline{$i} eq '';
9336 } ## end if ($cmd =~ /^(\d*)\s*(.*)/)
9337 } ## end sub cmd_pre580_a
9339 =head2 Old C<b> command
9351 if ( $cmd =~ /^load\b\s*(.*)/ ) {
9357 # b compile|postpone <some sub> [<condition>]
9358 # The interpreter actually traps this one for us; we just put the
9359 # necessary condition in the %postponed hash.
9360 elsif ( $cmd =~ /^(postpone|compile)\b\s*([':A-Za-z_][':\w]*)\s*(.*)/ ) {
9362 # Capture the condition if there is one. Make it true if none.
9363 my $cond = length $3 ? $3 : '1';
9365 # Save the sub name and set $break to 1 if $1 was 'postpone', 0
9366 # if it was 'compile'.
9367 my ( $subname, $break ) = ( $2, $1 eq 'postpone' );
9369 # De-Perl4-ify the name - ' separators to ::.
9370 $subname =~ s/\'/::/g;
9372 # Qualify it into the current package unless it's already qualified.
9373 $subname = "${'package'}::" . $subname
9374 unless $subname =~ /::/;
9376 # Add main if it starts with ::.
9377 $subname = "main" . $subname if substr( $subname, 0, 2 ) eq "::";
9379 # Save the break type for this sub.
9380 $postponed{$subname} = $break ? "break +0 if $cond" : "compile";
9381 } ## end elsif ($cmd =~ ...
9383 # b <sub name> [<condition>]
9384 elsif ( $cmd =~ /^([':A-Za-z_][':\w]*(?:\[.*\])?)\s*(.*)/ ) {
9386 my $cond = length $2 ? $2 : '1';
9387 &cmd_b_sub( $subname, $cond );
9389 # b <line> [<condition>].
9390 elsif ( $cmd =~ /^(\d*)\s*(.*)/ ) {
9391 my $i = $1 || $dbline;
9392 my $cond = length $2 ? $2 : '1';
9393 &cmd_b_line( $i, $cond );
9395 } ## end sub cmd_pre580_b
9397 =head2 Old C<D> command.
9399 Delete all breakpoints unconditionally.
9406 if ( $cmd =~ /^\s*$/ ) {
9407 print $OUT "Deleting all breakpoints...\n";
9409 # %had_breakpoints lists every file that had at least one
9412 for $file ( keys %had_breakpoints ) {
9414 # Switch to the desired file temporarily.
9415 local *dbline = $main::{ '_<' . $file };
9420 # For all lines in this file ...
9421 for ( $i = 1 ; $i <= $max ; $i++ ) {
9423 # If there's a breakpoint or action on this line ...
9424 if ( defined $dbline{$i} ) {
9426 # ... remove the breakpoint.
9427 $dbline{$i} =~ s/^[^\0]+//;
9428 if ( $dbline{$i} =~ s/^\0?$// ) {
9430 # Remove the entry altogether if no action is there.
9433 } ## end if (defined $dbline{$i...
9434 } ## end for ($i = 1 ; $i <= $max...
9436 # If, after we turn off the "there were breakpoints in this file"
9437 # bit, the entry in %had_breakpoints for this file is zero,
9438 # we should remove this file from the hash.
9439 if ( not $had_breakpoints{$file} &= ~1 ) {
9440 delete $had_breakpoints{$file};
9442 } ## end for $file (keys %had_breakpoints)
9444 # Kill off all the other breakpoints that are waiting for files that
9445 # haven't been loaded yet.
9447 undef %postponed_file;
9448 undef %break_on_load;
9449 } ## end if ($cmd =~ /^\s*$/)
9450 } ## end sub cmd_pre580_D
9452 =head2 Old C<h> command
9454 Print help. Defaults to printing the long-form help; the 5.8 version
9455 prints the summary by default.
9463 # Print the *right* help, long format.
9464 if ( $cmd =~ /^\s*$/ ) {
9465 print_help($pre580_help);
9468 # 'h h' - explicitly-requested summary.
9469 elsif ( $cmd =~ /^h\s*/ ) {
9470 print_help($pre580_summary);
9473 # Find and print a command's help.
9474 elsif ( $cmd =~ /^h\s+(\S.*)$/ ) {
9475 my $asked = $1; # for proper errmsg
9476 my $qasked = quotemeta($asked); # for searching
9477 # XXX: finds CR but not <CR>
9481 (?:[IB]<) # Optional markup
9482 $qasked # The command name
9489 ( # The command help:
9491 (?:[IB]<) # Optional markup
9492 $qasked # The command name
9493 ([\s\S]*?) # Lines starting with tabs
9497 ) # Line not starting with space
9498 # (Next command's help)
9502 } ## end if ($pre580_help =~ /^<?(?:[IB]<)$qasked/m)
9506 print_help("B<$asked> is not a debugger command.\n");
9508 } ## end elsif ($cmd =~ /^h\s+(\S.*)$/)
9509 } ## end sub cmd_pre580_h
9511 =head2 Old C<W> command
9513 C<W E<lt>exprE<gt>> adds a watch expression, C<W> deletes them all.
9521 # Delete all watch expressions.
9522 if ( $cmd =~ /^$/ ) {
9524 # No watching is going on.
9527 # Kill all the watch expressions and values.
9528 @to_watch = @old_watch = ();
9531 # Add a watch expression.
9532 elsif ( $cmd =~ /^(.*)/s ) {
9534 # add it to the list to be watched.
9537 # Get the current value of the expression.
9538 # Doesn't handle expressions returning list values!
9541 $val = ( defined $val ) ? "'$val'" : 'undef';
9544 push @old_watch, $val;
9546 # We're watching stuff.
9549 } ## end elsif ($cmd =~ /^(.*)/s)
9550 } ## end sub cmd_pre580_W
9552 =head1 PRE-AND-POST-PROMPT COMMANDS AND ACTIONS
9554 The debugger used to have a bunch of nearly-identical code to handle
9555 the pre-and-post-prompt action commands. C<cmd_pre590_prepost> and
9556 C<cmd_prepost> unify all this into one set of code to handle the
9557 appropriate actions.
9559 =head2 C<cmd_pre590_prepost>
9561 A small wrapper around C<cmd_prepost>; it makes sure that the default doesn't
9562 do something destructive. In pre 5.8 debuggers, the default action was to
9563 delete all the actions.
9567 sub cmd_pre590_prepost {
9569 my $line = shift || '*';
9572 return &cmd_prepost( $cmd, $line, $dbline );
9573 } ## end sub cmd_pre590_prepost
9575 =head2 C<cmd_prepost>
9577 Actually does all the handling for C<E<lt>>, C<E<gt>>, C<{{>, C<{>, etc.
9578 Since the lists of actions are all held in arrays that are pointed to by
9579 references anyway, all we have to do is pick the right array reference and
9580 then use generic code to all, delete, or list actions.
9587 # No action supplied defaults to 'list'.
9588 my $line = shift || '?';
9590 # Figure out what to put in the prompt.
9593 # Make sure we have some array or another to address later.
9594 # This means that if ssome reason the tests fail, we won't be
9595 # trying to stash actions or delete them from the wrong place.
9598 # < - Perl code to run before prompt.
9599 if ( $cmd =~ /^\</o ) {
9600 $which = 'pre-perl';
9604 # > - Perl code to run after prompt.
9605 elsif ( $cmd =~ /^\>/o ) {
9606 $which = 'post-perl';
9610 # { - first check for properly-balanced braces.
9611 elsif ( $cmd =~ /^\{/o ) {
9612 if ( $cmd =~ /^\{.*\}$/o && unbalanced( substr( $cmd, 1 ) ) ) {
9614 "$cmd is now a debugger command\nuse ';$cmd' if you mean Perl code\n";
9617 # Properly balanced. Pre-prompt debugger actions.
9619 $which = 'pre-debugger';
9622 } ## end elsif ( $cmd =~ /^\{/o )
9624 # Did we find something that makes sense?
9626 print $OUT "Confused by command: $cmd\n";
9633 if ( $line =~ /^\s*\?\s*$/o ) {
9636 # Nothing there. Complain.
9637 print $OUT "No $which actions.\n";
9641 # List the actions in the selected list.
9642 print $OUT "$which commands:\n";
9643 foreach my $action (@$aref) {
9644 print $OUT "\t$cmd -- $action\n";
9647 } ## end if ( $line =~ /^\s*\?\s*$/o)
9649 # Might be a delete.
9651 if ( length($cmd) == 1 ) {
9652 if ( $line =~ /^\s*\*\s*$/o ) {
9654 # It's a delete. Get rid of the old actions in the
9657 print $OUT "All $cmd actions cleared.\n";
9661 # Replace all the actions. (This is a <, >, or {).
9662 @$aref = action($line);
9664 } ## end if ( length($cmd) == 1)
9665 elsif ( length($cmd) == 2 ) {
9667 # Add the action to the line. (This is a <<, >>, or {{).
9668 push @$aref, action($line);
9672 # <<<, >>>>, {{{{{{ ... something not a command.
9674 "Confused by strange length of $which command($cmd)...\n";
9676 } ## end else [ if ( $line =~ /^\s*\?\s*$/o)
9678 } ## end sub cmd_prepost
9682 Contains the C<at_exit> routine that the debugger uses to issue the
9683 C<Debugged program terminated ...> message after the program completes. See
9684 the C<END> block documentation for more details.
9691 "Debugged program terminated. Use 'q' to quit or 'R' to restart.";
9694 package DB; # Do not trace this 1; below!