This is a live mirror of the Perl 5 development currently hosted at https://github.com/perl/perl5
Update Changes.
[perl5.git] / pod / perldelta.pod
1 =head1 NAME
2
3 perldelta - what is new for perl v5.8.0
4
5 =head1 DESCRIPTION
6
7 This document describes differences between the 5.6.0 release
8 and the 5.8.0 release.
9
10 Many of the bug fixes in 5.8.0 were already seen in the 5.6.1
11 maintenance release since the two releases were kept closely
12 coordinated.
13
14 If you are upgrading from Perl 5.005_03, you might also want
15 to read L<perl56delta>.
16
17 =head1 Highlights In 5.8.0
18
19 =over 4
20
21 =item *
22
23 Better Unicode support
24
25 =item *
26
27 New Thread Implementation
28
29 =item *
30
31 Many New Modules
32
33 =item *
34
35 Better Numeric Accuracy
36
37 =item *
38
39 Safe Signals
40
41 =item *
42
43 More Extensive Regression Testing
44
45 =back
46
47 =head1 Incompatible Changes
48
49 =head2 64-bit platforms and malloc
50
51 If your pointers are 64 bits wide, the Perl malloc is no longer being
52 used because it does not work well with 8-byte pointers.  Also,
53 usually the system mallocs on such platforms are much better optimized
54 for such large memory models than the Perl malloc.  Some memory-hungry
55 Perl applications like the PDL don't work well with Perl's malloc.
56 Finally, other applications than Perl (like modperl) tend to prefer
57 the system malloc.  Such platforms include Alpha and 64-bit HPPA,
58 MIPS, PPC, and Sparc.
59
60 =head2 AIX Dynaloading
61
62 The AIX dynaloading now uses in AIX releases 4.3 and newer the native
63 dlopen interface of AIX instead of the old emulated interface.  This
64 change will probably break backward compatibility with compiled
65 modules.  The change was made to make Perl more compliant with other
66 applications like modperl which are using the AIX native interface.
67
68 =head2 Attributes for C<my> variables now handled at run-time.
69
70 The C<my EXPR : ATTRS> syntax now applies variable attributes at
71 run-time.  (Subroutine and C<our> variables still get attributes applied
72 at compile-time.)  See L<attributes> for additional details.  In particular,
73 however, this allows variable attributes to be useful for C<tie> interfaces,
74 which was a deficiency of earlier releases.  Note that the new semantics
75 doesn't work with the Attribute::Handlers module (as of version 0.76).
76
77 =head2 Socket Extension Dynamic in VMS
78
79 The Socket extension is now dynamically loaded instead of being
80 statically built in.  This may or may not be a problem with ancient
81 TCP/IP stacks of VMS: we do not know since we weren't able to test
82 Perl in such configurations.
83
84 =head2 IEEE-format Floating Point Default on OpenVMS Alpha
85
86 Perl now uses IEEE format (T_FLOAT) as the default internal floating
87 point format on OpenVMS Alpha, potentially breaking binary compatibility
88 with external libraries or existing data.  G_FLOAT is still available as
89 a configuration option.  The default on VAX (D_FLOAT) has not changed.
90
91 =head2 New Unicode Properties
92
93 Unicode I<scripts> are now supported. Scripts are similar to (and superior
94 to) Unicode I<blocks>. The difference between scripts and blocks is that
95 scripts are the glyphs used by a language or a group of languages, while
96 the blocks are more artificial groupings of (mostly) 256 characters based
97 on the Unicode numbering.
98
99 In general, scripts are more inclusive, but not universally so. For
100 example, while the script C<Latin> includes all the Latin characters and
101 their various diacritic-adorned versions, it does not include the various
102 punctuation or digits (since they are not solely C<Latin>).
103
104 A number of other properties are now supported, including C<\p{L&}>,
105 C<\p{Any}> C<\p{Assigned}>, C<\p{Unassigned}>, C<\p{Blank}> and
106 C<\p{SpacePerl}> (along with their C<\P{...}> versions, of course).
107 See L<perlunicode> for details, and more additions.
108
109 The C<In> or C<Is> prefix to names used with the C<\p{...}> and C<\P{...}>
110 are now almost always optional. The only exception is that a C<In> prefix
111 is required to signify a Unicode block when a block name conflicts with a
112 script name. For example, C<\p{Tibetan}> refers to the script, while
113 C<\p{InTibetan}> refers to the block. When there is no name conflict, you
114 can omit the C<In> from the block name (e.g. C<\p{BraillePatterns}>), but
115 to be safe, it's probably best to always use the C<In>).
116
117 =head2 REF(...) Instead Of SCALAR(...)
118
119 A reference to a reference now stringifies as "REF(0x81485ec)" instead
120 of "SCALAR(0x81485ec)" in order to be more consistent with the return
121 value of ref().
122
123 =head2 pack/unpack D/F recycled
124
125 The undocumented pack/unpack template letters D/F have been recycled
126 for better use: now they stand for long double (if supported by the
127 platform) and NV (Perl internal floating point type).  (They used
128 to be aliases for d/f, but you never knew that.)
129
130 =head2 Deprecations
131
132 =over 4
133
134 =item *
135
136 The semantics of bless(REF, REF) were unclear and until someone proves
137 it to make some sense, it is forbidden.
138
139 =item *
140
141 The obsolete chat2 library that should never have been allowed
142 to escape the laboratory has been decommissioned.
143
144 =item *
145
146 The builtin dump() function has probably outlived most of its
147 usefulness.  The core-dumping functionality will remain in future
148 available as an explicit call to C<CORE::dump()>, but in future
149 releases the behaviour of an unqualified C<dump()> call may change.
150
151 =item *
152
153 The very dusty examples in the eg/ directory have been removed.
154 Suggestions for new shiny examples welcome but the main issue is that
155 the examples need to be documented, tested and (most importantly)
156 maintained.
157
158 =item *
159
160 The (bogus) escape sequences \8 and \9 now give an optional warning
161 ("Unrecognized escape passed through").  There is no need to \-escape
162 any C<\w> character.
163
164 =item *
165
166 The list of filenames from glob() (or <...>) is now by default sorted
167 alphabetically to be csh-compliant (which is what happened before
168 in most UNIX platforms).  (bsd_glob() does still sort platform
169 natively, ASCII or EBCDIC, unless GLOB_ALPHASORT is specified.)
170
171 =item *
172
173 Spurious syntax errors generated in certain situations, when glob()
174 caused File::Glob to be loaded for the first time, have been fixed.
175
176 =item *
177
178 Although "you shouldn't do that", it was possible to write code that
179 depends on Perl's hashed key order (Data::Dumper does this).  The new
180 algorithm "One-at-a-Time" produces a different hashed key order.
181 More details are in L</"Performance Enhancements">.
182
183 =item *
184
185 lstat(FILEHANDLE) now gives a warning because the operation makes no sense.
186 In future releases this may become a fatal error.
187
188 =item *
189
190 The C<package;> syntax (C<package> without an argument) has been
191 deprecated.  Its semantics were never that clear and its
192 implementation even less so.  If you have used that feature to
193 disallow all but fully qualified variables, C<use strict;> instead.
194
195 =item *
196
197 The unimplemented POSIX regex features [[.cc.]] and [[=c=]] are still
198 recognised but now cause fatal errors.  The previous behaviour of
199 ignoring them by default and warning if requested was unacceptable
200 since it, in a way, falsely promised that the features could be used.
201
202 =item *
203
204 The current user-visible implementation of pseudo-hashes (the weird
205 use of the first array element) is deprecated starting from Perl 5.8.0
206 and will be removed in Perl 5.10.0, and the feature will be
207 implemented differently.  Not only is the current interface rather
208 ugly, but the current implementation slows down normal array and hash
209 use quite noticeably. The C<fields> pragma interface will remain
210 available.  The I<restricted hashes> interface is expected to
211 be the replacement interface (see L<Hash::Util>).
212
213 =item *
214
215 The syntaxes C<< @a->[...] >> and  C<< %h->{...} >> have now been deprecated.
216
217 =item *
218
219 After years of trying the suidperl is considered to be too complex to
220 ever be considered truly secure.  The suidperl functionality is likely
221 to be removed in a future release.
222
223 =item *
224
225 The long deprecated uppercase aliases for the string comparison
226 operators (EQ, NE, LT, LE, GE, GT) have now been removed.
227
228 =item *
229
230 The tr///C and tr///U features have been removed and will not return;
231 the interface was a mistake.  Sorry about that.  For similar
232 functionality, see pack('U0', ...) and pack('C0', ...).
233
234 =item *
235
236 Earlier Perls treated "sub foo (@bar)" as equivalent to "sub foo (@)".
237 The prototypes are now checked at compile-time for invalid characters.
238 An optional warning is generated ("Illegal character in prototype...")
239 but this may be upgraded to a fatal error in a future release.
240
241 =back
242
243 =head1 Core Enhancements
244
245 =head2 PerlIO is Now The Default
246
247 =over 4
248
249 =item *
250
251 IO is now by default done via PerlIO rather than system's "stdio".
252 PerlIO allows "layers" to be "pushed" onto a file handle to alter the
253 handle's behaviour.  Layers can be specified at open time via 3-arg
254 form of open:
255
256    open($fh,'>:crlf :utf8', $path) || ...
257
258 or on already opened handles via extended C<binmode>:
259
260    binmode($fh,':encoding(iso-8859-7)');
261
262 The built-in layers are: unix (low level read/write), stdio (as in
263 previous Perls), perlio (re-implementation of stdio buffering in a
264 portable manner), crlf (does CRLF <=> "\n" translation as on Win32,
265 but available on any platform).  A mmap layer may be available if
266 platform supports it (mostly UNIXes).
267
268 Layers to be applied by default may be specified via the 'open' pragma.
269
270 See L</"Installation and Configuration Improvements"> for the effects
271 of PerlIO on your architecture name.
272
273 =item *
274
275 File handles can be marked as accepting Perl's internal encoding of Unicode
276 (UTF-8 or UTF-EBCDIC depending on platform) by a pseudo layer ":utf8" :
277
278    open($fh,">:utf8","Uni.txt");
279
280 Note for EBCDIC users: the pseudo layer ":utf8" is erroneously named
281 for you since it's not UTF-8 what you will be getting but instead
282 UTF-EBCDIC.  See L<perlunicode>, L<utf8>, and
283 http://www.unicode.org/unicode/reports/tr16/ for more information.
284 In future releases this naming may change.
285
286 =item *
287
288 File handles can translate character encodings from/to Perl's internal
289 Unicode form on read/write via the ":encoding()" layer.
290
291 =item *
292
293 File handles can be opened to "in memory" files held in Perl scalars via:
294
295    open($fh,'>', \$variable) || ...
296
297 =item *
298
299 Anonymous temporary files are available without need to
300 'use FileHandle' or other module via
301
302    open($fh,"+>", undef) || ...
303
304 That is a literal undef, not an undefined value.
305
306 =item *
307
308 The list form of C<open> is now implemented for pipes (at least on UNIX):
309
310    open($fh,"-|", 'cat', '/etc/motd')
311
312 creates a pipe, and runs the equivalent of exec('cat', '/etc/motd') in
313 the child process.
314
315 =item *
316
317 If your locale environment variables (LANGUAGE, LC_ALL, LC_CTYPE, LANG)
318 contain the strings 'UTF-8' or 'UTF8' (case-insensitive matching),
319 the default encoding of your STDIN, STDOUT, and STDERR, and of
320 B<any subsequent file open>, is UTF-8.
321
322 =back
323
324 =head2 Safe Signals
325
326 Perl used to be fragile in that signals arriving at inopportune moments
327 could corrupt Perl's internal state.  Now Perl postpones handling of
328 signals until it's safe (between opcodes).
329
330 This change may have surprising side effects because signals no longer
331 interrupt Perl instantly.  Perl will now first finish whatever it was
332 doing, like finishing an internal operation (like sort()) or an
333 external operation (like an I/O operation), and only then look at any
334 arrived signals (and before starting the next operation).  No more corrupt
335 internal state since the current operation is always finished first,
336 but the signal may take more time to get heard.  Note that breaking
337 out from potentially blocking operations should still work, though.
338
339 =head2 Unicode Overhaul
340
341 Unicode in general should be now much more usable than in Perl 5.6.0
342 (or even in 5.6.1).  Unicode can be used in hash keys, Unicode in
343 regular expressions should work now, Unicode in tr/// should work now,
344 Unicode in I/O should work now.  See L<perluniintro> for introduction
345 and L<perlunicode> for details.
346
347 =over 4
348
349 =item *
350
351 The Unicode Character Database coming with Perl has been upgraded
352 to Unicode 3.1.1.  For more information, see http://www.unicode.org/ .
353
354 =item *
355
356 For developers interested in enhancing Perl's Unicode capabilities:
357 almost all the UCD files are included with the Perl distribution in
358 the F<lib/unicore subdirectory>.  The most notable omission, for space
359 considerations, is the Unihan database.
360
361 =item *
362
363 The properties \p{Blank} and \p{SpacePerl} have been added. "Blank" is like
364 C isblank(), that is, it contains only "horizontal whitespace" (the space
365 character is, the newline isn't), and the "SpacePerl" is the Unicode
366 equivalent of C<\s> (\p{Space} isn't, since that includes the vertical
367 tabulator character, whereas C<\s> doesn't.)
368
369 See "New Unicode Properties" earlier in this document for additional
370 information on changes with Unicode properties.
371
372 =back
373
374 =head2 Understanding of Numbers
375
376 In general a lot of fixing has happened in the area of Perl's
377 understanding of numbers, both integer and floating point.  Since in
378 many systems the standard number parsing functions like C<strtoul()>
379 and C<atof()> seem to have bugs, Perl tries to work around their
380 deficiencies.  This results hopefully in more accurate numbers.
381
382 Perl now tries internally to use integer values in numeric conversions
383 and basic arithmetics (+ - * /) if the arguments are integers, and
384 tries also to keep the results stored internally as integers.
385 This change leads to often slightly faster and always less lossy
386 arithmetics. (Previously Perl always preferred floating point numbers
387 in its math.)
388
389 =head2 Miscellaneous Changes
390
391 =over 4
392
393 =item *
394
395 AUTOLOAD is now lvaluable, meaning that you can add the :lvalue attribute
396 to AUTOLOAD subroutines and you can assign to the AUTOLOAD return value.
397
398 =item *
399
400 C<perl -d:Module=arg,arg,arg> now works (previously one couldn't pass
401 in multiple arguments.)
402
403 =item *
404
405 The builtin dump() now gives an optional warning
406 C<dump() better written as CORE::dump()>,
407 meaning that by default C<dump(...)> is resolved as the builtin 
408 dump() which dumps core and aborts, not as (possibly) user-defined
409 C<sub dump>.  To call the latter, qualify the call as C<&dump(...)>.
410 (The whole dump() feature is to considered deprecated, and possibly
411 removed/changed in future releases.)
412
413 =item *
414
415 chomp() and chop() are now overridable.  Note, however, that their
416 prototype (as given by C<prototype("CORE::chomp")> is undefined,
417 because it cannot be expressed and therefore one cannot really write
418 replacements to override these builtins.
419
420 =item *
421
422 END blocks are now run even if you exit/die in a BEGIN block.
423 Internally, the execution of END blocks is now controlled by 
424 PL_exit_flags & PERL_EXIT_DESTRUCT_END. This enables the new
425 behaviour for Perl embedders. This will default in 5.10. See
426 L<perlembed>.
427
428 =item *
429
430 Formats now support zero-padded decimal fields.
431
432 =item *
433
434 Lvalue subroutines can now return C<undef> in list context.
435 However, the lvalue subroutine feature still remains experimental.
436
437 =item *
438
439 A lost warning "Can't declare ... dereference in my" has been
440 restored (Perl had it earlier but it became lost in later releases.)
441
442 =item *
443
444 A new special regular expression variable has been introduced:
445 C<$^N>, which contains the most-recently closed group (submatch).
446
447 =item *
448
449 C<no Module;> now works even if there is no "sub unimport" in the Module.
450
451 =item *
452
453 The numerical comparison operators return C<undef> if either operand
454 is a NaN.  Previously the behaviour was unspecified.
455
456 =item *
457
458 The following builtin functions are now overridable: each(), keys(),
459 pop(), push(), shift(), splice(), unshift().
460
461 =item *
462
463 C<pack() / unpack()> now can group template letters with C<()> and then
464 apply repetition/count modifiers on the groups.
465
466 =item *
467
468 C<pack() / unpack()> can now process the Perl internal numeric types:
469 IVs, UVs, NVs-- and also long doubles, if supported by the platform.
470 The template letters are C<j>, C<J>, C<F>, and C<D>.
471
472 =item *
473
474 C<pack('U0a*', ...)> can now be used to force a string to UTF8.
475
476 =item *
477
478 my __PACKAGE__ $obj now works.
479
480 =item *
481
482 The printf() and sprintf() now support parameter reordering using the
483 C<%\d+\$> and C<*\d+\$> syntaxes.  For example
484
485     print "%2\$s %1\$s\n", "foo", "bar";
486
487 will print "bar foo\n".  This feature helps in writing
488 internationalised software, and in general when the order
489 of the parameters can vary.
490
491 =item *
492
493 prototype(\&) is now available.
494
495 =item *
496
497 prototype(\[$@%&]) is now available to implicitly create references
498 (useful for example if you want to emulate the tie() interface).
499
500 =item *
501
502 A new command-line option, C<-t> is available.  It is the
503 little brother of C<-T>: instead of dieing on taint violations,
504 lexical warnings are given.  B<This is only meant as a temporary
505 debugging aid while securing the code of old legacy applications.
506 This is not a substitute for -T.>
507
508 =item *
509
510 In other taint news, the C<exec LIST> and C<system LIST> have now been
511 considered too risky (think C<exec @ARGV>: it can start any program
512 with any arguments), and now the said forms cause a warning.
513 You should carefully launder the arguments to guarantee their
514 validity.  In future releases of Perl the forms will become fatal
515 errors so consider starting laundering now.
516
517 =item *
518
519 If tr/// is just counting characters, it doesn't attempt to
520 modify its target.
521
522 =item *
523
524 untie() will now call an UNTIE() hook if it exists.  See L<perltie>
525 for details.
526
527 =item *
528
529 L<utime> now supports C<utime undef, undef, @files> to change the
530 file timestamps to the current time.
531
532 =item *
533
534 The rules for allowing underscores (underbars) in numeric constants
535 have been relaxed and simplified: now you can have an underscore
536 simply B<between digits>.
537
538 =item *
539
540 Rather than relying on C's argv[0] (which may not contain a full pathname)
541 where possible $^X is now set by asking the operating system.
542 (eg by reading F</proc/self/exe> on Linux, F</proc/curproc/file> on FreeBSD)
543
544 =item *
545
546 A new variable, C<${^TAINT}>, indicates whether taint mode is enabled.
547
548 =item *
549
550 You can now override the readline() builtin, and this overrides also
551 the <FILEHANDLE> angle bracket operator.
552
553 =item *
554
555 The command-line options -s and -F are now recognized on the shebang
556 (#!) line.
557
558 =back
559
560 =head1 Modules and Pragmata
561
562 =head2 New Modules and Pragmata
563
564 =over 4
565
566 =item *
567
568 C<Attribute::Handlers> allows a class to define attribute handlers.
569
570     package MyPack;
571     use Attribute::Handlers;
572     sub Wolf :ATTR(SCALAR) { print "howl!\n" }
573
574     # later, in some package using or inheriting from MyPack...
575
576     my MyPack $Fluffy : Wolf; # the attribute handler Wolf will be called
577
578 Both variables and routines can have attribute handlers.  Handlers can
579 be specific to type (SCALAR, ARRAY, HASH, or CODE), or specific to the
580 exact compilation phase (BEGIN, CHECK, INIT, or END).
581
582 =item *
583
584 B<B::Concise> is a new compiler backend for walking the Perl syntax
585 tree, printing concise info about ops, from Stephen McCamant.  The
586 output is highly customisable.  See L<B::Concise>.
587
588 =item *
589
590 The new bignum, bigint, and bigrat pragmas implement transparent
591 bignum support (using the Math::BigInt, Math::BigFloat, and
592 Math::BigRat backends), by Tels.
593
594 =item *
595
596 C<Class::ISA> for reporting the search path for a class's ISA tree,
597 by Sean Burke, has been added.  See L<Class::ISA>.
598
599 =item *
600
601 C<Cwd> has now a split personality: if possible, an XS extension is
602 used, (this will hopefully be faster, more secure, and more robust)
603 but if not possible, the familiar Perl implementation is used.
604
605 =item *
606
607 C<Devel::PPPort>, originally from Kenneth Albanowski and now
608 maintained by Paul Marquess, has been added.  It is primarily used
609 by C<h2xs> to enhance portability of XS modules between different
610 versions of Perl.
611
612 =item *
613
614 C<Digest>, frontend module for calculating digests (checksums), from
615 Gisle Aas, has been added.  See L<Digest>.
616
617 =item *
618
619 C<Digest::MD5> for calculating MD5 digests (checksums) as defined in
620 RFC 1321, from Gisle Aas, has been added.  See L<Digest::MD5>.
621
622     use Digest::MD5 'md5_hex';
623
624     $digest = md5_hex("Thirsty Camel");
625
626     print $digest, "\n"; # 01d19d9d2045e005c3f1b80e8b164de1
627
628 NOTE: the C<MD5> backward compatibility module is deliberately not
629 included since its further use is discouraged.
630
631 =item *
632
633 C<Encode>, by Nick Ing-Simmons and Dan Kogai, provides a mechanism to
634 translate between different character encodings.  Support for Unicode,
635 ISO-8859-1, and ASCII are compiled in to the module.  Several other
636 encodings (like the rest of the ISO-8859, CP*/Win*, Mac, KOI8-R, three
637 variants EBCDIC, Chinese, Japanese, and Korean encodings) are included
638 and can be loaded at runtime.  (For space considerations, the largest
639 Chinese encodings have been separated into their own CPAN module,
640 Encode::HanExtra, which Encode will use if available).  See L<Encode>.
641
642 Any encoding supported by Encode module is also available to the
643 ":encoding()" layer if PerlIO is used.
644
645 =item *
646
647 C<Hash::Util> is the interface to the new I<restricted hashes>
648 feature.  A restricted hash is restricted to a certain set of keys,
649 no keys outside the set can be added.  Also individual keys can be
650 restricted so that the key cannot be deleted and the value cannot be
651 changed.  (Implemented by Jeffrey Friedl, Nick Ing-Simmons, and
652 Michael Schwern.)
653
654 =item *
655
656 C<I18N::Langinfo> can be use to query locale information.
657 See L<I18N::Langinfo>.
658
659 =item *
660
661 C<I18N::LangTags> has functions for dealing with RFC3066-style
662 language tags, by Sean Burke.  See L<I18N::LangTags>.
663
664 =item *
665
666 C<ExtUtils::Constant> is a new tool for extension writers for
667 generating XS code to import C header constants, by Nicholas Clark.
668 See L<ExtUtils::Constant>.
669
670 =item *
671
672 C<Filter::Simple> is an easy-to-use frontend to Filter::Util::Call,
673 from Damian Conway.  See L<Filter::Simple>.
674
675     # in MyFilter.pm:
676
677     package MyFilter;
678
679     use Filter::Simple sub {
680         while (my ($from, $to) = splice @_, 0, 2) {
681                 s/$from/$to/g;
682         }
683     };
684
685     1;
686
687     # in user's code:
688
689     use MyFilter qr/red/ => 'green';
690
691     print "red\n";   # this code is filtered, will print "green\n"
692     print "bored\n"; # this code is filtered, will print "bogreen\n"
693
694     no MyFilter;
695
696     print "red\n";   # this code is not filtered, will print "red\n"
697
698 =item *
699
700 C<File::Temp> allows one to create temporary files and directories in
701 an easy, portable, and secure way, by Tim Jenness.  See L<File::Temp>.
702
703 =item *
704
705 C<Filter::Util::Call> provides you with the framework to write
706 I<Source Filters> in Perl, from Paul Marquess.  For most uses the
707 frontend Filter::Simple is to be preferred.  See L<Filter::Util::Call>.
708
709 =item *
710
711 C<if> is a new pragma for conditional inclusion of modules, from
712 Ilya Zakharevich.
713
714 =item *
715
716 L<libnet> is a collection of perl5 modules related to network
717 programming, from Graham Barr.  See L<Net::FTP>, L<Net::NNTP>,
718 L<Net::Ping>, L<Net::POP3>, L<Net::SMTP>, and L<Net::Time>.
719
720 Perl installation leaves libnet unconfigured, use F<libnetcfg> to configure.
721
722 =item *
723
724 C<List::Util> is a selection of general-utility list subroutines, like
725 sum(), min(), first(), and shuffle(), by Graham Barr.  See L<List::Util>.
726
727 =item *
728
729 C<Locale::Constants>, C<Locale::Country>, C<Locale::Currency>, and
730 C<Locale::Language>, from Neil Bowers, have been added.  They provide the
731 codes for various locale standards, such as "fr" for France, "usd" for
732 US Dollar, and "jp" for Japanese.
733
734     use Locale::Country;
735
736     $country = code2country('jp');               # $country gets 'Japan'
737     $code    = country2code('Norway');           # $code gets 'no'
738
739 See L<Locale::Constants>, L<Locale::Country>, L<Locale::Currency>,
740 and L<Locale::Language>.
741
742 =item *
743
744 C<Locale::Maketext> is localization framework from Sean Burke.  See
745 L<Locale::Maketext>, and L<Locale::Maketext::TPJ13>.  The latter is an
746 article about software localization, originally published in The Perl
747 Journal #13, republished here with kind permission.
748
749 =item *
750
751 Math::BigRat for big rational numbers, to accompany Math::BigInt and
752 Math::BigFloat, from Tels.
753
754 =item *
755
756 C<Memoize> can make your functions faster by trading space for time,
757 from Mark-Jason Dominus.  See L<Memoize>.
758
759 =item *
760
761 C<MIME::Base64> allows you to encode data in base64, from Gisle Aas,
762 as defined in RFC 2045 - I<MIME (Multipurpose Internet Mail
763 Extensions)>.
764
765     use MIME::Base64;
766
767     $encoded = encode_base64('Aladdin:open sesame');
768     $decoded = decode_base64($encoded);
769
770     print $encoded, "\n"; # "QWxhZGRpbjpvcGVuIHNlc2FtZQ=="
771
772 See L<MIME::Base64>.
773
774 =item *
775
776 C<MIME::QuotedPrint> allows you to encode data in quoted-printable
777 encoding, as defined in RFC 2045 - I<MIME (Multipurpose Internet Mail
778 Extensions)>, from Gisle Aas.
779
780     use MIME::QuotedPrint;
781
782     $encoded = encode_qp("Smiley in Unicode: \x{263a}");
783     $decoded = decode_qp($encoded);
784
785     print $encoded, "\n"; # "Smiley in Unicode: =263A"
786
787 MIME::QuotedPrint has been enhanced to provide the basic methods
788 necessary to use it with PerlIO::Via as in :
789
790     use MIME::QuotedPrint;
791     open($fh,">Via(MIME::QuotedPrint)",$path);
792
793 See L<MIME::QuotedPrint>.
794
795 =item *
796
797 C<NEXT> is pseudo-class for method redispatch, from Damian Conway.
798 See L<NEXT>.
799
800 =item *
801
802 C<open> is a new pragma for setting the default I/O disciplines
803 for open().
804
805 =item *
806
807 C<PerlIO::Scalar> provides the implementation of IO to "in memory"
808 Perl scalars as discussed above, from Nick Ing-Simmons.  It also
809 serves as an example of a loadable PerlIO layer.  Other future
810 possibilities include PerlIO::Array and PerlIO::Code.
811 See L<PerlIO::Scalar>.
812
813 =item *
814
815 C<PerlIO::Via> acts as a PerlIO layer and wraps PerlIO layer
816 functionality provided by a class (typically implemented in perl
817 code), from Nick Ing-Simmons.
818
819     use MIME::QuotedPrint;
820     open($fh,">Via(MIME::QuotedPrint)",$path);
821
822 This will automatically convert everything output to C<$fh>
823 to Quoted-Printable.  See L<PerlIO::Via>.
824
825 =item *
826
827 C<Pod::ParseLink>, by Russ Allbery, has been added,
828 to parse LZ<><> links in pods as described in the new
829 perlpodspec.
830
831 =item *
832
833 C<Pod::Text::Overstrike>, by Joe Smith, has been added.
834 It converts POD data to formatted overstrike text.
835 See L<Pod::Text::Overstrike>.
836
837 =item *
838
839 C<Scalar::Util> is a selection of general-utility scalar subroutines,
840 like blessed(), reftype(), and tainted().  See L<Scalar::Util>.
841
842 =item *
843
844 C<sort> is a new pragma for controlling the behaviour of sort().
845
846 =item *
847
848 C<Storable> gives persistence to Perl data structures by allowing the
849 storage and retrieval of Perl data to and from files in a fast and
850 compact binary format, from Raphael Manfredi.  See L<Storable>.
851
852 =item *
853
854 C<Switch>, from Damian Conway, has been added.  Just by saying
855
856     use Switch;
857
858 you have C<switch> and C<case> available in Perl.
859
860     use Switch;
861
862     switch ($val) {
863
864                 case 1          { print "number 1" }
865                 case "a"        { print "string a" }
866                 case [1..10,42] { print "number in list" }
867                 case (@array)   { print "number in list" }
868                 case /\w+/      { print "pattern" }
869                 case qr/\w+/    { print "pattern" }
870                 case (%hash)    { print "entry in hash" }
871                 case (\%hash)   { print "entry in hash" }
872                 case (\&sub)    { print "arg to subroutine" }
873                 else            { print "previous case not true" }
874     }
875
876 See L<Switch>.
877
878 =item *
879
880 C<Test::More> is yet another framework for writing test scripts,
881 more extensive than Test::Simple, by Michael Schwern.  See L<Test::More>.
882
883 =item *
884
885 C<Test::Simple> has basic utilities for writing tests, by Michael
886 Schwern.   See L<Test::Simple>.
887
888 =item *
889
890 C<Text::Balanced> has been added, for extracting delimited text
891 sequences from strings, from Damian Conway.
892
893     use Text::Balanced 'extract_delimited';
894
895     ($a, $b) = extract_delimited("'never say never', he never said", "'", '');
896
897 $a will be "'never say never'", $b will be ', he never said'.
898
899 In addition to extract_delimited() there are also extract_bracketed(),
900 extract_quotelike(), extract_codeblock(), extract_variable(),
901 extract_tagged(), extract_multiple(), gen_delimited_pat(), and
902 gen_extract_tagged().  With these you can implement rather advanced
903 parsing algorithms.  See L<Text::Balanced>.
904
905 =item *
906
907 C<threads> is an interface to interpreter threads, by Arthur Bergman.
908 Interpreter threads (ithreads) is the new thread model introduced in
909 Perl 5.6 but only available as an internal interface for extension
910 writers (and for Win32 Perl for C<fork()> emulation).  See L<threads>.
911
912 =item *
913
914 C<threads::shared> allows data sharing for interpreter threads, from
915 Arthur Bergman.  In the ithreads model any data sharing between
916 threads must be explicit, as opposed to the old 5.005 thread model
917 where data sharing was implicit.  See L<threads::shared>.
918
919 =item *
920
921 C<Tie::File>, by Mark-Jason Dominus, associates a Perl array with the
922 lines of a file.
923
924 =item *
925
926 C<Tie::Memoize>, by Ilya Zakharevich, provides on-demand loaded hashes.
927
928 =item *
929
930 C<Tie::RefHash::Nestable>, by Edward Avis, allows storing hash
931 references (unlike the standard Tie::RefHash)  The module is contained
932 within Tie::RefHash, see L<Tie::RefHash>.
933
934 =item *
935
936 C<Time::HiRes> provides high resolution timing (ualarm, usleep,
937 and gettimeofday), from Douglas E. Wegscheid.  See L<Time::HiRes>.
938
939 =item *
940
941 C<Unicode::UCD> offers a querying interface to the Unicode Character
942 Database.  See L<Unicode::UCD>.
943
944 =item *
945
946 C<Unicode::Collate> implements the UCA (Unicode Collation Algorithm)
947 for sorting Unicode strings, by SADAHIRO Tomoyuki.  See L<Unicode::Collate>.
948
949 =item *
950
951 C<Unicode::Normalize> implements the various Unicode normalization
952 forms, by SADAHIRO Tomoyuki.  See L<Unicode::Normalize>.
953
954 =item *
955
956 C<XS::Typemap>, by Tim Jenness, is a test extension that exercises XS
957 typemaps.  Nothing gets installed but for extension writers the code
958 is worth studying.
959
960 =back
961
962 =head2 Updated And Improved Modules and Pragmata
963
964 =over 4
965
966 =item *
967
968 The following independently supported modules have been updated to the
969 newest versions from CPAN: CGI, CPAN, DB_File, File::Spec, File::Temp,
970 Getopt::Long, Math::BigFloat, Math::BigInt, the podlators bundle
971 (Pod::Man, Pod::Text), Pod::LaTeX, Pod::Parser, Storable,
972 Term::ANSIColor, Test, Text-Tabs+Wrap.
973
974 =item *
975
976 The attributes::reftype() now works on tied arguments.
977
978 =item *
979
980 AutoLoader can now be disabled with C<no AutoLoader;>.
981
982 =item *
983
984 B::Deparse has been significantly enhanced.  It now can deparse almost
985 all of the standard test suite (so that the tests still succeed).
986 There is a make target "test.deparse" for trying this out.
987
988 =item *
989
990 Class::Struct can now define the classes in compile time.
991
992 =item *
993
994 Class::Struct now assigns the array/hash element if the accessor
995 is called with an array/hash element as the B<sole> argument.
996
997 =item *
998
999 Data::Dumper has now an option to sort hashes.
1000
1001 =item *
1002
1003 Data::Dumper has now an option to dump code references
1004 using B::Deparse.
1005
1006 =item *
1007
1008 DB_File now supports newer Berkeley DB versions, among
1009 other improvements.
1010
1011 =item *
1012
1013 The English module can now be used without the infamous performance
1014 hit by saying
1015
1016         use English '-no_match_vars';
1017
1018 (Assuming, of course, that one doesn't need the troublesome variables
1019 C<$`>, C<$&>, or C<$'>.)  Also, introduced C<@LAST_MATCH_START> and
1020 C<@LAST_MATCH_END> English aliases for C<@-> and C<@+>.
1021
1022 =item *
1023
1024 Fcntl, Socket, and Sys::Syslog have been rewritten to use the
1025 new-style constant dispatch section (see L<ExtUtils::Constant>).
1026 This means that they will be more robust and hopefully faster.
1027
1028 =item *
1029
1030 File::Find now chdir()s correctly when chasing symbolic links.
1031
1032 =item *
1033
1034 File::Find now has pre- and post-processing callbacks.  It also
1035 correctly changes directories when chasing symbolic links.  Callbacks
1036 (naughtily) exiting with "next;" instead of "return;" now work.
1037
1038 =item *
1039
1040 File::Find is now (again) reentrant.  It also has been made
1041 more portable.
1042
1043 =item *
1044
1045 The warnings issued by File::Find now belong to their own category.
1046 You can enable/disable them with C<use/no warnings 'File::Find';>.
1047
1048 =item *
1049
1050 File::Glob::glob() renamed to File::Glob::bsd_glob() to avoid
1051 prototype mismatch with CORE::glob().
1052
1053 =item *
1054
1055 File::Glob now supports C<GLOB_LIMIT> constant to limit the size of
1056 the returned list of filenames.
1057
1058 =item *
1059
1060 Devel::Peek now has an interface for the Perl memory statistics
1061 (this works only if you are using perl's malloc, and if you have
1062 compiled with debugging).
1063
1064 =item *
1065
1066 IPC::Open3 now allows the use of numeric file descriptors.
1067
1068 =item *
1069
1070 IO::Socket has now atmark() method, which returns true if the socket
1071 is positioned at the out-of-band mark.  The method is also exportable
1072 as a sockatmark() function.
1073
1074 =item *
1075
1076 IO::Socket::INET has support for ReusePort option (if your platform
1077 supports it).  The Reuse option now has an alias, ReuseAddr.  For clarity
1078 you may want to prefer ReuseAddr.
1079
1080 =item *
1081
1082 IO::Socket::INET now supports C<LocalPort> of zero (usually meaning
1083 that the operating system will make one up.)
1084
1085 =item *
1086
1087 use lib now works identically to @INC.  Removing directories
1088 with 'no lib' now works.
1089
1090 =item *
1091
1092 ExtUtils::MakeMaker now uses File::Spec internally, which hopefully
1093 leads into better portability.
1094
1095 =item *
1096
1097 Math::BigFloat and Math::BigInt have undergone a full rewrite.
1098 They are now magnitudes faster, and they support various
1099 bignum libraries such as GMP and PARI as their backends.
1100
1101 =item *
1102
1103 Math::Complex handles inf, NaN etc., better.
1104
1105 =item *
1106
1107 Net::Ping has been muchly enhanced.  Multihoming is now supported.
1108 There is now "external" protocol which uses Net::Ping::External module
1109 which runs external ping(1) and parses the output.  A version of
1110 Net::Ping::External is available in CPAN.
1111
1112 =item *
1113
1114 POSIX::sigaction() is now much more flexible and robust.
1115 You can now install coderef handlers, 'DEFAULT', and 'IGNORE'
1116 handlers, installing new handlers was not atomic.
1117
1118 =item *
1119
1120 In Safe the C<%INC> now localised in a Safe compartment so that
1121 use/require work.
1122
1123 =item *
1124
1125 In SDBM_File on dosish platforms, some keys went missing because of
1126 lack of support for files with "holes".  A workaround for the problem
1127 has been added.
1128
1129 =item *
1130
1131 In Search::Dict one can now have a pre-processing hook for the
1132 lines being searched.
1133
1134 =item *
1135
1136 The Shell module now has an OO interface.
1137
1138 =item *
1139
1140 In Sys::Syslog there is now a failover mechanism that will go
1141 through alternative connection mechanisms until the message
1142 is successfully logged.
1143
1144 =item *
1145
1146 The Test module has been significantly enhanced.
1147
1148 =item *
1149
1150 Time::Local::timelocal() does not handle fractional seconds anymore.
1151 The rationale is that neither does localtime(), and timelocal() and
1152 localtime() are supposed to be inverses of each other.
1153
1154 =item *
1155
1156 The vars pragma now supports declaring fully qualified variables.
1157 (Something that C<our()> does not and will not support.)
1158
1159 =item *
1160
1161 The C<utf8::> name space (as in the pragma) provides various
1162 Perl-callable functions to provide low level access to Perl's
1163 internal Unicode representation.  At the moment only length()
1164 has been implemented.
1165
1166 =back
1167
1168 =head1 Utility Changes
1169
1170 =over 4
1171
1172 =item *
1173
1174 Emacs perl mode (emacs/cperl-mode.el) has been updated to version
1175 4.31.
1176
1177 =item *
1178
1179 F<emacs/e2ctags.pl> is now much faster.
1180
1181 =item *
1182
1183 C<h2ph> now supports C trigraphs.
1184
1185 =item *
1186
1187 C<h2xs> now produces a template README.
1188
1189 =item *
1190
1191 C<h2xs> now uses C<Devel::PPort> for better portability between
1192 different versions of Perl.
1193
1194 =item *
1195
1196 C<h2xs> uses the new L<ExtUtils::Constant> module which will affect
1197 newly created extensions that define constants.  Since the new code is
1198 more correct (if you have two constants where the first one is a
1199 prefix of the second one, the first constant B<never> gets defined),
1200 less lossy (it uses integers for integer constant, as opposed to the
1201 old code that used floating point numbers even for integer constants),
1202 and slightly faster, you might want to consider regenerating your
1203 extension code (the new scheme makes regenerating easy).
1204 L<h2xs> now also supports C trigraphs.
1205
1206 =item *
1207
1208 C<libnetcfg> has been added to configure the libnet.
1209
1210 =item *
1211
1212 C<perlbug> is now much more robust.  It also sends the bug report to
1213 perl.org, not perl.com.
1214
1215 =item *
1216
1217 C<perlcc> has been rewritten and its user interface (that is,
1218 command line) is much more like that of the UNIX C compiler, cc.
1219 (The perlbc tools has been removed.  Use C<perlcc -B> instead.)
1220
1221 =item *
1222
1223 C<perlivp> is a new Installation Verification Procedure utility
1224 for running any time after installing Perl.
1225
1226 =item *
1227
1228 C<pod2html> now allows specifying a cache directory.
1229
1230 =item *
1231
1232 C<s2p> has been completely rewritten in Perl.  (It is in fact a full
1233 implementation of sed in Perl: you can use the sed functionality by
1234 using the C<psed> utility.)
1235
1236 =item *
1237
1238 C<xsubpp> now understands POD documentation embedded in the *.xs files.
1239
1240 =item *
1241
1242 C<xsubpp> now supports OUT keyword.
1243
1244 =back
1245
1246 =head1 New Documentation
1247
1248 =over 4
1249
1250 =item *
1251
1252 perl56delta details the changes between the 5.005 release and the
1253 5.6.0 release.
1254
1255 =item *
1256
1257 perlclib documents the internal replacements for standard C library
1258 functions.  (Interesting only for extension writers and Perl core
1259 hackers.)
1260
1261 =item *
1262
1263 perldebtut is a Perl debugging tutorial.
1264
1265 =item *
1266
1267 perlebcdic contains considerations for running Perl on EBCDIC platforms.
1268
1269 =item *
1270
1271 perlintro is a gentle introduction to Perl.
1272
1273 =item *
1274
1275 perliol documents the internals of PerlIO with layers.
1276
1277 =item *
1278
1279 perlmodstyle is a style guide for writing modules.
1280
1281 =item *
1282
1283 perlnewmod tells about writing and submitting a new module.
1284
1285 =item *
1286
1287 perlpacktut is a pack() tutorial.
1288
1289 =item *
1290
1291 perlpod has been rewritten to be clearer and to record the best
1292 practices gathered over the years.
1293
1294 =item *
1295
1296 perlpodspec is a more formal specification of the pod format,
1297 mainly of interest for writers of pod applications, not to
1298 people writing in pod.
1299
1300 =item *
1301
1302 perlretut is a regular expression tutorial.
1303
1304 =item *
1305
1306 perlrequick is a regular expressions quick-start guide.
1307 Yes, much quicker than perlretut.
1308
1309 =item *
1310
1311 perltodo has been updated.
1312
1313 =item *
1314
1315 perltootc has been renamed as perltooc (to not to conflict
1316 with perltoot in filesystems restricted to "8.3" names)
1317
1318 =item *
1319
1320 perluniintro is an introduction to using Unicode in Perl.
1321 (perlunicode is more of a detailed reference and background
1322 information)
1323
1324 =item *
1325
1326 perlutil explains the command line utilities packaged with the Perl
1327 distribution.
1328
1329 =back
1330
1331 The following platform-specific documents are available before
1332 the installation as README.I<platform>, and after the installation
1333 as perlI<platform>:
1334
1335     perlaix perlamiga perlapollo perlbeos perlbs2000
1336     perlce perlcygwin perldgux perldos perlepoc perlhpux
1337     perlhurd perlmachten perlmacos perlmint perlmpeix
1338     perlnetware perlos2 perlos390 perlplan9 perlqnx perlsolaris
1339     perltru64 perluts perlvmesa perlvms perlvos perlwin32
1340
1341 =over 4
1342
1343 =item *
1344
1345 The documentation for the POSIX-BC platform is called "BS2000", to avoid
1346 confusion with the Perl POSIX module.
1347
1348 =item *
1349
1350 The documentation for the WinCE platform is called "CE", to avoid
1351 confusion with the perlwin32 documentation on 8.3-restricted filesystems.
1352
1353 =back
1354
1355 =head1 Performance Enhancements
1356
1357 =over 4
1358
1359 =item *
1360
1361 map() could get pathologically slow when the result list it generates
1362 is larger than the source list.  The performance has been improved for
1363 common scenarios.
1364
1365 =item *
1366
1367 sort() has been changed to use primarily mergesort internally as
1368 opposed to the earlier quicksort.  For very small lists this may
1369 result in slightly slower sorting times, but in general the speedup
1370 should be at least 20%.  Additional bonuses are that the worst case
1371 behaviour of sort() is now better (in computer science terms it now
1372 runs in time O(N log N), as opposed to quicksort's Theta(N**2)
1373 worst-case run time behaviour), and that sort() is now stable
1374 (meaning that elements with identical keys will stay ordered as they
1375 were before the sort).  See the C<sort> pragma for information.
1376
1377 The story in more detail: suppose you want to serve yourself a little
1378 slice of Pi.
1379
1380     @digits = ( 3,1,4,1,5,9 );
1381
1382 A numerical sort of the digits will yield (1,1,3,4,5,9), as expected.
1383 Which C<1> comes first is hard to know, since one C<1> looks pretty
1384 much like any other.  You can regard this as totally trivial,
1385 or somewhat profound.  However, if you just want to sort the even
1386 digits ahead of the odd ones, then what will
1387
1388     sort { ($a % 2) <=> ($b % 2) } @digits;
1389
1390 yield?  The only even digit, C<4>, will come first.  But how about
1391 the odd numbers, which all compare equal?  With the quicksort algorithm
1392 used to implement Perl 5.6 and earlier, the order of ties is left up
1393 to the sort.  So, as you add more and more digits of Pi, the order
1394 in which the sorted even and odd digits appear will change.
1395 and, for sufficiently large slices of Pi, the quicksort algorithm
1396 in Perl 5.8 won't return the same results even if reinvoked with the
1397 same input.  The justification for this rests with quicksort's
1398 worst case behavior.  If you run
1399
1400    sort { $a <=> $b } ( 1 .. $N , 1 .. $N );
1401
1402 (something you might approximate if you wanted to merge two sorted
1403 arrays using sort), doubling $N doesn't just double the quicksort time,
1404 it I<quadruples> it.  Quicksort has a worst case run time that can
1405 grow like N**2, so-called I<quadratic> behaviour, and it can happen
1406 on patterns that may well arise in normal use.  You won't notice this
1407 for small arrays, but you I<will> notice it with larger arrays,
1408 and you may not live long enough for the sort to complete on arrays
1409 of a million elements.  So the 5.8 quicksort scrambles large arrays
1410 before sorting them, as a statistical defence against quadratic behaviour.
1411 But that means if you sort the same large array twice, ties may be
1412 broken in different ways.
1413
1414 Because of the unpredictability of tie-breaking order, and the quadratic
1415 worst-case behaviour, quicksort was I<almost> replaced completely with
1416 a stable mergesort.  I<Stable> means that ties are broken to preserve
1417 the original order of appearance in the input array.  So
1418
1419     sort { ($a % 2) <=> ($b % 2) } (3,1,4,1,5,9);
1420
1421 will yield (4,3,1,1,5,9), guaranteed.  The even and odd numbers
1422 appear in the output in the same order they appeared in the input.
1423 Mergesort has worst case O(NlogN) behaviour, the best value
1424 attainable.  And, ironically, this mergesort does particularly
1425 well where quicksort goes quadratic:  mergesort sorts (1..$N, 1..$N)
1426 in O(N) time.  But quicksort was rescued at the last moment because
1427 it is faster than mergesort on certain inputs and platforms.
1428 For example, if you really I<don't> care about the order of even
1429 and odd digits, quicksort will run in O(N) time; it's very good
1430 at sorting many repetitions of a small number of distinct elements.
1431 The quicksort divide and conquer strategy works well on platforms
1432 with relatively small, very fast, caches.  Eventually, the problem gets
1433 whittled down to one that fits in the cache, from which point it
1434 benefits from the increased memory speed.
1435
1436 Quicksort was rescued by implementing a sort pragma to control aspects
1437 of the sort.  The B<stable> subpragma forces stable behaviour,
1438 regardless of algorithm.  The B<_quicksort> and B<_mergesort>
1439 subpragmas are heavy-handed ways to select the underlying implementation.
1440 The leading C<_> is a reminder that these subpragmas may not survive
1441 beyond 5.8.  More appropriate mechanisms for selecting the implementation
1442 exist, but they wouldn't have arrived in time to save quicksort.
1443
1444 =item *
1445
1446 Hashes now use Bob Jenkins "One-at-a-Time" hashing key algorithm
1447 ( http://burtleburtle.net/bob/hash/doobs.html ).  This algorithm is
1448 reasonably fast while producing a much better spread of values than
1449 the old hashing algorithm (originally by Chris Torek, later tweaked by
1450 Ilya Zakharevich).  Hash values output from the algorithm on a hash of
1451 all 3-char printable ASCII keys comes much closer to passing the
1452 DIEHARD random number generation tests.  According to perlbench, this
1453 change has not affected the overall speed of Perl.
1454
1455 =item *
1456
1457 unshift() should now be noticeably faster.
1458
1459 =back
1460
1461 =head1 Installation and Configuration Improvements
1462
1463 =head2 Generic Improvements
1464
1465 =over 4
1466
1467 =item *
1468
1469 INSTALL now explains how you can configure Perl to use 64-bit
1470 integers even on non-64-bit platforms.
1471
1472 =item *
1473
1474 Policy.sh policy change: if you are reusing a Policy.sh file
1475 (see INSTALL) and you use Configure -Dprefix=/foo/bar and in the old
1476 Policy $prefix eq $siteprefix and $prefix eq $vendorprefix, all of
1477 them will now be changed to the new prefix, /foo/bar.  (Previously
1478 only $prefix changed.)  If you do not like this new behaviour,
1479 specify prefix, siteprefix, and vendorprefix explicitly.
1480
1481 =item *
1482
1483 A new optional location for Perl libraries, otherlibdirs, is available.
1484 It can be used for example for vendor add-ons without disturbing Perl's
1485 own library directories.
1486
1487 =item *
1488
1489 In many platforms the vendor-supplied 'cc' is too stripped-down to
1490 build Perl (basically, 'cc' doesn't do ANSI C).  If this seems
1491 to be the case and 'cc' does not seem to be the GNU C compiler
1492 'gcc', an automatic attempt is made to find and use 'gcc' instead.
1493
1494 =item *
1495
1496 gcc needs to closely track the operating system release to avoid
1497 build problems. If Configure finds that gcc was built for a different
1498 operating system release than is running, it now gives a clearly visible
1499 warning that there may be trouble ahead.
1500
1501 =item *
1502
1503 If binary compatibility with the 5.005 release is not wanted, Configure
1504 no longer suggests including the 5.005 modules in @INC.
1505
1506 =item *
1507
1508 Configure C<-S> can now run non-interactively.
1509
1510 =item *
1511
1512 Configure support for pdp11-style memory models has been removed due
1513 to obsolescence.
1514
1515 =item *
1516
1517 configure.gnu now works with options with whitespace in them.
1518
1519 =item *
1520
1521 installperl now outputs everything to STDERR.
1522
1523 =item *
1524
1525 $Config{byteorder} is now computed dynamically (this is more robust
1526 with "fat binaries" where an executable image contains binaries for
1527 more than one binary platform.)
1528
1529 =item *
1530
1531 Because PerlIO is now the default on most platforms, "-perlio" doesn't
1532 get appended to the $Config{archname} (also known as $^O) anymore.
1533 Instead, if you explicitly choose not to use perlio (Configure command
1534 line option -Uuseperlio), you will get "-stdio" appended.
1535
1536 =item *
1537
1538 Another change related to the architecture name is that "-64all"
1539 (-Duse64bitall, or "maximally 64-bit") is appended only if your
1540 pointers are 64 bits wide.  (To be exact, the use64bitall is ignored.)
1541
1542 =item *
1543
1544 In AFS installations one can configure the root of the AFS to be
1545 somewhere else than the default F</afs> by using the Configure
1546 parameter C<-Dafsroot=/some/where/else>.
1547
1548 =item *
1549
1550 APPLLIB_EXP, a less-know configuration-time definition, has been
1551 documented.  It can be used to prepend site-specific directories
1552 to Perl's default search path (@INC), see INSTALL for information.
1553
1554 =item *
1555
1556 The version of Berkeley DB used when the Perl (and, presumably, the
1557 DB_File extension) was built is now available as
1558 C<@Config{qw(db_version_major db_version_minor db_version_patch)}>
1559 from Perl and as C<DB_VERSION_MAJOR_CFG DB_VERSION_MINOR_CFG
1560 DB_VERSION_PATCH_CFG> from C.
1561
1562 =item *
1563
1564 Building Berkeley DB3 for compatibility modes for DB, NDBM, and ODBM
1565 has been documented in INSTALL.
1566
1567 =item *
1568
1569 If you have CPAN access (either network or a local copy such as a
1570 CD-ROM) you can during specify extra modules to Configure to build and
1571 install with Perl using the -Dextras=...  option.  See INSTALL for
1572 more details.
1573
1574 =item *
1575
1576 In addition to config.over a new override file, config.arch, is
1577 available.  That is supposed to be used by hints file writers for
1578 architecture-wide changes (as opposed to config.over which is for
1579 site-wide changes).
1580
1581 =item *
1582
1583 If your file system supports symbolic links you can build Perl outside
1584 of the source directory by
1585
1586         mkdir /tmp/perl/build/directory
1587         cd /tmp/perl/build/directory
1588         sh /path/to/perl/source/Configure -Dmksymlinks ...
1589
1590 This will create in /tmp/perl/build/directory a tree of symbolic links
1591 pointing to files in /path/to/perl/source.  The original files are left
1592 unaffected.  After Configure has finished you can just say
1593
1594         make all test
1595
1596 and Perl will be built and tested, all in /tmp/perl/build/directory.
1597
1598 =item *
1599
1600 For Perl developers several new make targets for profiling
1601 and debugging have been added, see L<perlhack>.
1602
1603 =over 8
1604
1605 =item *
1606
1607 Use of the F<gprof> tool to profile Perl has been documented in
1608 L<perlhack>.  There is a make target called "perl.gprof" for
1609 generating a gprofiled Perl executable.
1610
1611 =item *
1612
1613 If you have GCC 3, there is a make target called "perl.gcov" for
1614 creating a gcoved Perl executable for coverage analysis.  See
1615 L<perlhack>.
1616
1617 =item *
1618
1619 If you are on IRIX or Tru64 platforms, new profiling/debugging options
1620 have been added, see L<perlhack> for more information about pixie and
1621 Third Degree.
1622
1623 =back
1624
1625 =item *
1626
1627 Guidelines of how to construct minimal Perl installations have
1628 been added to INSTALL.
1629
1630 =item *
1631
1632 The Thread extension is now not built at all under ithreads
1633 (C<Configure -Duseithreads>) because it wouldn't work anyway (the
1634 Thread extension requires being Configured with C<-Duse5005threads>).
1635
1636 But note that the Thread.pm interface is now shared by both
1637 thread models.
1638
1639 =item *
1640
1641 The Gconvert macro ($Config{d_Gconvert}) used by perl for stringifying
1642 floating-point numbers is now more picky about using sprintf %.*g
1643 rules for the conversion.  Some platforms that used to use gcvt may
1644 now resort to the slower sprintf.
1645
1646 =back
1647
1648 =head2 New Or Improved Platforms
1649
1650 For the list of platforms known to support Perl,
1651 see L<perlport/"Supported Platforms">.
1652
1653 =over 4
1654
1655 =item *
1656
1657 AIX dynamic loading should be now better supported.
1658
1659 =item *
1660
1661 AIX should now work better with gcc, threads, and 64-bitness.  Also the
1662 long doubles support in AIX should be better now.  See L<perlaix>.
1663
1664 =item *
1665
1666 After a long pause, AmigaOS has been verified to be happy with Perl.
1667
1668 =item *
1669
1670 AtheOS ( http://www.atheos.cx/ ) is a new platform.
1671
1672 =item *
1673
1674 BeOS has been reclaimed.
1675
1676 =item *
1677
1678 DG/UX platform now supports the 5.005-style threads.  See L<perldgux>.
1679
1680 =item *
1681
1682 DYNIX/ptx platform (a.k.a. dynixptx) is supported at or near osvers 4.5.2.
1683
1684 =item *
1685
1686 EBCDIC platforms (z/OS, also known as OS/390, POSIX-BC, and VM/ESA)
1687 have been regained.  Many test suite tests still fail and the
1688 co-existence of Unicode and EBCDIC isn't quite settled, but the
1689 situation is much better than with Perl 5.6.  See L<perlos390>,
1690 L<perlbs2000> (for POSIX-BC), and L<perlvmesa> for more information.
1691
1692 =item *
1693
1694 Building perl with -Duseithreads or -Duse5005threads now works under
1695 HP-UX 10.20 (previously it only worked under 10.30 or later). You will
1696 need a thread library package installed. See README.hpux.
1697
1698 =item *
1699
1700 MacOS Classic (MacPerl has of course been available since
1701 perl 5.004 but now the source code bases of standard Perl
1702 and MacPerl have been synchronised)
1703
1704 =item *
1705
1706 MacOS X (or Darwin) should now be able to build Perl even on HFS+
1707 filesystems.  (The case-insensitivity confused the Perl build process.)
1708
1709 =item *
1710
1711 NCR MP-RAS is now supported.
1712
1713 =item *
1714
1715 All the NetBSD specific patches (except for the installation
1716 specific ones) have been merged back to the main distribution.
1717
1718 =item *
1719
1720 NetWare from Novell is now supported.  See L<perlnetware>.
1721
1722 =item *
1723
1724 NonStop-UX is now supported.
1725
1726 =item *
1727
1728 NEC SUPER-UX is now supported.
1729
1730 =item *
1731
1732 All the OpenBSD specific patches (except for the installation
1733 specific ones) have been merged back to the main distribution.
1734
1735 =item *
1736
1737 Perl has been tested with the GNU pth userlevel thread package
1738 ( http://www.gnu.org/software/pth/pth.html ) . All but one thread
1739 test worked, and that one failure was because of test results arriving
1740 in unexpected order.
1741
1742 =item *
1743
1744 Amdahl UTS UNIX mainframe platform is now supported.
1745
1746 =item *
1747
1748 WinCE is now supported.  See L<perlce>.
1749
1750 =item *
1751
1752 z/OS (formerly known as OS/390, formerly known as MVS OE) has now
1753 support for dynamic loading.  This is not selected by default,
1754 however, you must specify -Dusedl in the arguments of Configure.
1755
1756 =back
1757
1758 =head1 Selected Bug Fixes
1759
1760 Numerous memory leaks and uninitialized memory accesses have been
1761 hunted down.  Most importantly anonymous subs used to leak quite
1762 a bit.
1763
1764 =over 4
1765
1766 =item *
1767
1768 The autouse pragma didn't work for Multi::Part::Function::Names.
1769
1770 =item *
1771
1772 caller() could cause core dumps in certain situations.  Carp was sometimes
1773 affected by this problem.
1774
1775 =item *
1776
1777 chop(@list) in list context returned the characters chopped in
1778 reverse order.  This has been reversed to be in the right order.
1779
1780 =item *
1781
1782 Configure no longer includes the DBM libraries (dbm, gdbm, db, ndbm)
1783 when building the Perl binary.  The only exception to this is SunOS 4.x,
1784 which needs them.
1785
1786 =item *
1787
1788 The behaviour of non-decimal but numeric string constants such as
1789 "0x23" was platform-dependent: in some platforms that was seen as 35,
1790 in some as 0, in some as a floating point number (don't ask).  This
1791 was caused by Perl using the operating system libraries in a situation
1792 where the result of the string to number conversion is undefined: now
1793 Perl consistently handles such strings as zero in numeric contexts.
1794
1795 =item *
1796
1797 The order of DESTROYs has been made more predictable.
1798
1799 =item *
1800
1801 Several debugger fixes: exit code now reflects the script exit code,
1802 condition C<"0"> now treated correctly, the C<d> command now checks
1803 line number, the C<$.> no longer gets corrupted, all debugger output
1804 now goes correctly to the socket if RemotePort is set.
1805
1806 =item *
1807
1808 Perl 5.6.0 could emit spurious warnings about redefinition of dl_error()
1809 when statically building extensions into perl.  This has been corrected.
1810
1811 =item *
1812
1813 L<dprofpp> -R didn't work.
1814
1815 =item *
1816
1817 C<*foo{FORMAT}> now works.
1818 =item *
1819
1820 Infinity is now recognized as a number.
1821
1822 =item *
1823
1824 UNIVERSAL::isa no longer caches methods incorrectly.  (This broke
1825 the Tk extension with 5.6.0.)
1826
1827 =item *
1828
1829 Lexicals I: lexicals outside an eval "" weren't resolved
1830 correctly inside a subroutine definition inside the eval "" if they
1831 were not already referenced in the top level of the eval""ed code.
1832
1833 =item *
1834
1835 Lexicals II: lexicals leaked at file scope into subroutines that
1836 were declared before the lexicals.
1837
1838 =item *
1839
1840 Lexical warnings now propagating correctly between scopes
1841 and into C<eval "...">.
1842
1843 =item *
1844
1845 C<use warnings qw(FATAL all)> did not work as intended.  This has been
1846 corrected.
1847
1848 =item *
1849
1850 warnings::enabled() now reports the state of $^W correctly if the caller
1851 isn't using lexical warnings.
1852
1853 =item *
1854
1855 Line renumbering with eval and C<#line> now works.
1856
1857 =item *
1858
1859 Fixed numerous memory leaks, especially in eval "".
1860
1861 =item *
1862
1863 mkdir() now ignores trailing slashes in the directory name,
1864 as mandated by POSIX.
1865
1866 =item *
1867
1868 Some versions of glibc have a broken modfl().  This affects builds
1869 with C<-Duselongdouble>.  This version of Perl detects this brokenness
1870 and has a workaround for it.  The glibc release 2.2.2 is known to have
1871 fixed the modfl() bug.
1872
1873 =item *
1874
1875 Modulus of unsigned numbers now works (4063328477 % 65535 used to
1876 return 27406, instead of 27047).
1877
1878 =item *
1879
1880 Some "not a number" warnings introduced in 5.6.0 eliminated to be
1881 more compatible with 5.005.  Infinity is now recognised as a number.
1882
1883 =item *
1884
1885 Numeric conversions did not recognize changes in the string value
1886 properly in certain circumstances.
1887
1888 =item *
1889
1890 Attributes (like :shared) didn't work with our().
1891
1892 =item *
1893
1894 our() variables will not cause "will not stay shared" warnings.
1895
1896 =item *
1897
1898 "our" variables of the same name declared in two sibling blocks
1899 resulted in bogus warnings about "redeclaration" of the variables.
1900 The problem has been corrected.
1901
1902 =item *
1903
1904 pack "Z" now correctly terminates the string with "\0".
1905
1906 =item *
1907
1908 Fix password routines which in some shadow password platforms
1909 (e.g. HP-UX) caused getpwent() to return every other entry.
1910
1911 =item *
1912
1913 The PERL5OPT environment variable (for passing command line arguments
1914 to Perl) didn't work for more than a single group of options.
1915
1916 =item *
1917
1918 PERL5OPT with embedded spaces didn't work.
1919
1920 =item *
1921
1922 printf() no longer resets the numeric locale to "C".
1923
1924 =item *
1925
1926 C<qw(a\\b)> now parses correctly as C<'a\\b'>.
1927
1928 =item *
1929
1930 pos() did not return the correct value within s///ge in earlier
1931 versions.  This is now handled correctly.
1932
1933 =item *
1934
1935 Printing quads (64-bit integers) with printf/sprintf now works
1936 without the q L ll prefixes (assuming you are on a quad-capable platform).
1937
1938 =item *
1939
1940 Regular expressions on references and overloaded scalars now work.
1941
1942 =item *
1943
1944 Right-hand side magic (GMAGIC) could in many cases such as string
1945 concatenation be invoked too many times.
1946
1947 =item *
1948
1949 scalar() now forces scalar context even when used in void context.
1950
1951 =item *
1952
1953 SOCKS support is now much more robust.
1954
1955 =item *
1956
1957 sort() arguments are now compiled in the right wantarray context
1958 (they were accidentally using the context of the sort() itself).
1959 The comparison block is now run in scalar context, and the arguments
1960 to be sorted are always provided list context.
1961
1962 =item *
1963
1964 Changed the POSIX character class C<[[:space:]]> to include the (very
1965 rarely used) vertical tab character.  Added a new POSIX-ish character
1966 class C<[[:blank:]]> which stands for horizontal whitespace
1967 (currently, the space and the tab).
1968
1969 =item *
1970
1971 The tainting behaviour of sprintf() has been rationalized.  It does
1972 not taint the result of floating point formats anymore, making the
1973 behaviour consistent with that of string interpolation.
1974
1975 =item *
1976
1977 Some cases of inconsistent taint propagation (such as within hash
1978 values) have been fixed.
1979
1980 =item *
1981
1982 The RE engine found in Perl 5.6.0 accidentally pessimised certain kinds
1983 of simple pattern matches.  These are now handled better.
1984
1985 =item *
1986
1987 Regular expression debug output (whether through C<use re 'debug'>
1988 or via C<-Dr>) now looks better.
1989
1990 =item *
1991
1992 Multi-line matches like C<"a\nxb\n" =~ /(?!\A)x/m> were flawed.  The
1993 bug has been fixed.
1994
1995 =item *
1996
1997 Use of $& could trigger a core dump under some situations.  This
1998 is now avoided.
1999
2000 =item *
2001
2002 The regular expression captured submatches ($1, $2, ...) are now
2003 more consistently unset if the match fails, instead of leaving false
2004 data lying around in them.
2005
2006 =item *
2007
2008 readline() on files opened in "slurp" mode could return an extra "" at
2009 the end in certain situations.  This has been corrected.
2010
2011 =item *
2012
2013 Autovivification of symbolic references of special variables described
2014 in L<perlvar> (as in C<${$num}>) was accidentally disabled.  This works
2015 again now.
2016
2017 =item *
2018
2019 Sys::Syslog ignored the C<LOG_AUTH> constant.
2020
2021 =item *
2022
2023 All but the first argument of the IO syswrite() method are now optional.
2024
2025 =item *
2026
2027 $AUTOLOAD, sort(), lock(), and spawning subprocesses
2028 in multiple threads simultaneously are now thread-safe.
2029
2030 =item *
2031
2032 Tie::ARRAY SPLICE method was broken.
2033
2034 =item *
2035
2036 Allow read-only string on left hand side of non-modifying tr///.
2037
2038 =item *
2039
2040 If C<STDERR> is tied, warnings caused by C<warn> and C<die> now
2041 correctly pass to it.
2042
2043 =item *
2044
2045 Several Unicode fixes.
2046
2047 =over 8
2048
2049 =item *
2050
2051 BOMs (byte order marks) in the beginning of Perl files
2052 (scripts, modules) should now be transparently skipped.
2053 UTF-16 (UCS-2) encoded Perl files should now be read correctly.
2054
2055 =item *
2056
2057 The character tables have been updated to Unicode 3.1.1.
2058
2059 =item *
2060
2061 Comparing with utf8 data does not magically upgrade non-utf8 data
2062 into utf8.  (This was a problem for example if you were mixing data
2063 from I/O and Unicode data: your output might have got magically encoded
2064 as UTF-8.)
2065
2066 =item *
2067
2068 Generating illegal Unicode code points like U+FFFE, or the UTF-16
2069 surrogates, now also generates an optional warning.
2070
2071 =item *
2072
2073 C<IsAlnum>, C<IsAlpha>, and C<IsWord> now match titlecase.
2074
2075 =item *
2076
2077 Concatenation with the C<.> operator or via variable interpolation,
2078 C<eq>, C<substr>, C<reverse>, C<quotemeta>, the C<x> operator,
2079 substitution with C<s///>, single-quoted UTF8, should now work.
2080
2081 =item *
2082
2083 The C<tr///> operator now works.  Note that the C<tr///CU>
2084 functionality has been removed (but see pack('U0', ...)).
2085
2086 =item *
2087
2088 C<eval "v200"> now works.
2089
2090 =item *
2091
2092 Perl 5.6.0 parsed m/\x{ab}/ incorrectly, leading to spurious warnings.
2093 This has been corrected.
2094
2095 =item *
2096
2097 Zero entries were missing from the Unicode classes like C<IsDigit>.
2098
2099 =back
2100
2101 =item *
2102
2103 Large unsigned numbers (those above 2**31) could sometimes lose their
2104 unsignedness, causing bogus results in arithmetic operations.
2105
2106 =back
2107
2108 =head2 Platform Specific Changes and Fixes
2109
2110 =over 4
2111
2112 =item *
2113
2114 BSDI 4.*
2115
2116 Perl now works on post-4.0 BSD/OSes.
2117
2118 =item *
2119
2120 All BSDs
2121
2122 Setting C<$0> now works (as much as possible; see L<perlvar> for details).
2123
2124 =item *
2125
2126 Cygwin
2127
2128 Numerous updates; currently synchronised with Cygwin 1.3.10.
2129
2130 =item *
2131
2132 Previously DYNIX/ptx had problems in its Configure probe for non-blocking I/O.
2133
2134 =item *
2135
2136 EPOC
2137
2138 EPOC update after Perl 5.6.0.  See README.epoc.
2139
2140 =item *
2141
2142 FreeBSD 3.*
2143
2144 Perl now works on post-3.0 FreeBSDs.
2145
2146 =item *
2147
2148 HP-UX
2149
2150 README.hpux updated; C<Configure -Duse64bitall> now works.
2151
2152 =item *
2153
2154 IRIX
2155
2156 Numerous compilation flag and hint enhancements; accidental mixing
2157 of 32-bit and 64-bit libraries (a doomed attempt) made much harder.
2158
2159 =item *
2160
2161 Linux
2162
2163 =over 8
2164
2165 =item *
2166
2167 Long doubles should now work (see INSTALL).
2168
2169 =item *
2170
2171 Linux previously had problems related to sockaddrlen when using
2172 accept(), revcfrom() (in Perl: recv()), getpeername(), and getsockname().
2173
2174 =back
2175
2176 =item *
2177
2178 MacOS Classic
2179
2180 Compilation of the standard Perl distribution in MacOS Classic should
2181 now work if you have the Metrowerks development environment and
2182 the missing Mac-specific toolkit bits.  Contact the macperl mailing
2183 list for details.
2184
2185 =item *
2186
2187 MPE/iX
2188
2189 MPE/iX update after Perl 5.6.0.  See README.mpeix.
2190
2191 =item *
2192
2193 NetBSD/sparc
2194
2195 Perl now works on NetBSD/sparc.
2196
2197 =item *
2198
2199 OS/2
2200
2201 Now works with usethreads (see INSTALL).
2202
2203 =item *
2204
2205 Solaris
2206
2207 64-bitness using the Sun Workshop compiler now works.
2208
2209 =item *
2210
2211 Tru64 (aka Digital UNIX, aka DEC OSF/1)
2212
2213 The operating system version letter now recorded in $Config{osvers}.
2214 Allow compiling with gcc (previously explicitly forbidden).  Compiling
2215 with gcc still not recommended because buggy code results, even with
2216 gcc 2.95.2.
2217
2218 =item *
2219
2220 Unicos
2221
2222 Fixed various alignment problems that lead into core dumps either
2223 during build or later; no longer dies on math errors at runtime;
2224 now using full quad integers (64 bits), previously was using 
2225 only 46 bit integers for speed.
2226
2227 =item *
2228
2229 VMS
2230
2231 chdir() now works better despite a CRT bug; now works with MULTIPLICITY
2232 (see INSTALL); now works with Perl's malloc.
2233
2234 The tainting of C<%ENV> elements via C<keys> or C<values> was previously
2235 unimplemented.  It now works as documented.
2236
2237 The C<waitpid> emulation has been improved.  The worst bug (now fixed)
2238 was that a pid of -1 would cause a wildcard search of all processes on
2239 the system.  The most significant enhancement is that we can now
2240 usually get the completion status of a terminated process.
2241
2242 POSIX-style signals are now emulated much better on VMS versions prior
2243 to 7.0.
2244
2245 The C<system> function and backticks operator have improved
2246 functionality and better error handling.
2247
2248 File access tests now use current process privileges rather than the
2249 user's default privileges, which could sometimes result in a mismatch
2250 between reported access and actual access.
2251
2252 =item *
2253
2254 Windows
2255
2256 =over 8
2257
2258 =item *
2259
2260 accept() no longer leaks memory.
2261
2262 =item *
2263
2264 Borland C++ v5.5 is now a supported compiler that can build Perl.
2265 However, the generated binaries continue to be incompatible with those
2266 generated by the other supported compilers (GCC and Visual C++).
2267
2268 =item *
2269
2270 Better chdir() return value for a non-existent directory.
2271
2272 =item *
2273
2274 Duping socket handles with open(F, ">&MYSOCK") now works under Windows 9x.
2275
2276 =item *
2277
2278 New %ENV entries now propagate to subprocesses.
2279
2280 =item *
2281
2282 Current directory entries in %ENV are now correctly propagated to child
2283 processes.
2284
2285 =item *
2286
2287 $ENV{LIB} now used to search for libs under Visual C.
2288
2289 =item *
2290
2291 fork() emulation has been improved in various ways, but still continues
2292 to be experimental.  See L<perlfork> for known bugs and caveats.
2293
2294 =item *
2295
2296 A failed (pseudo)fork now returns undef and sets errno to EAGAIN.
2297
2298 =item *
2299
2300 Win32::GetCwd() correctly returns C:\ instead of C: when at the drive root.
2301 Other bugs in chdir() and Cwd::cwd() have also been fixed.
2302
2303 =item *
2304
2305 HTML files will be installed in c:\perl\html instead of c:\perl\lib\pod\html
2306
2307 =item *
2308
2309 The makefiles now provide a single switch to bulk-enable all the features
2310 enabled in ActiveState ActivePerl (a popular Win32 binary distribution).
2311
2312 =item *
2313
2314 Allow REG_EXPAND_SZ keys in the registry.
2315
2316 =item *
2317
2318 Can now send() from all threads, not just the first one.
2319
2320 =item *
2321
2322 Fake signal handling reenabled, bugs and all.
2323
2324 =item *
2325
2326 %SIG has been enabled under USE_ITHREADS, but its use is completely
2327 unsupported under all configurations.
2328
2329 =item *
2330
2331 Less stack reserved per thread so that more threads can run
2332 concurrently. (Still 16M per thread.)
2333
2334 =item *
2335
2336 C<File::Spec-&gt;tmpdir()> now prefers C:/temp over /tmp
2337 (works better when perl is running as service).
2338
2339 =item *
2340
2341 Better UNC path handling under ithreads.
2342
2343 =item *
2344
2345 wait(), waitpid() and backticks now return the correct exit status under
2346 Windows 9x.
2347
2348 =item *
2349
2350 winsock handle leak fixed.
2351
2352 =item *
2353
2354 The Perl parser has been stress tested using both random input and
2355 Markov chain input and the few found crashes and lockups have been
2356 fixed.
2357
2358 =back
2359
2360 =back
2361
2362 =head1 New or Changed Diagnostics
2363
2364 =over 4
2365
2366 =item *
2367
2368 The lexical warnings category "deprecated" is no longer a sub-category
2369 of the "syntax" category. It is now a top-level category in its own
2370 right.
2371
2372 =item *
2373
2374 All regular expression compilation error messages are now hopefully
2375 easier to understand both because the error message now comes before
2376 the failed regex and because the point of failure is now clearly
2377 marked by a C<E<lt>-- HERE> marker.
2378
2379 =item *
2380
2381 The various "opened only for", "on closed", "never opened" warnings
2382 drop the C<main::> prefix for filehandles in the C<main> package,
2383 for example C<STDIN> instead of C<main::STDIN>. 
2384
2385 =item *
2386
2387 The "Unrecognized escape" warning has been extended to include C<\8>,
2388 C<\9>, and C<\_>.  There is no need to escape any of the C<\w> characters.
2389
2390 =item *
2391
2392 Two new debugging options have been added: if you have compiled your
2393 Perl with debugging, you can use the -DT and -DR options to trace
2394 tokenising and to add reference counts to displaying variables,
2395 respectively.
2396
2397 =item *
2398
2399 The debugger (perl5db.pl) has been modified to present a more
2400 consistent commands interface, via (CommandSet=580).  perl5db.t was
2401 also added to test the changes, and as a placeholder for further tests.
2402
2403 See L<perldebug>.
2404
2405 =item *
2406
2407 The debugger has a new C<dumpDepth> option to control the maximum
2408 depth to which nested structures are dumped.  The C<x> command has
2409 been extended so that C<x N EXPR> dumps out the value of I<EXPR> to a
2410 depth of at most I<N> levels.
2411
2412 =item *
2413
2414 The debugger can now show lexical variables if you have the CPAN
2415 module PadWalker installed.
2416
2417 =item *
2418
2419 If an attempt to use a (non-blessed) reference as an array index
2420 is made, a warning is given.
2421
2422 =item *
2423
2424 C<push @a;> and C<unshift @a;> (with no values to push or unshift)
2425 now give a warning.  This may be a problem for generated and evaled
2426 code.
2427
2428 =item *
2429
2430 If you try to L<perlfunc/pack> a number less than 0 or larger than 255
2431 using the C<"C"> format you will get an optional warning.  Similarly
2432 for the C<"c"> format and a number less than -128 or more than 127.
2433
2434 =item *
2435
2436 Certain regex modifiers such as C<(?o)> make sense only if applied to
2437 the entire regex.  You will get an optional warning if you try to do
2438 otherwise. 
2439
2440 =item *
2441
2442 Using arrays or hashes as references (e.g. C<< %foo->{bar} >>
2443 has been deprecated for a while.  Now you will get an optional warning.
2444
2445 =item *
2446
2447 Using C<sort> in scalar context now issues an optional warning.
2448 This didn't do anything useful, as the sort was not performed.
2449
2450 =back
2451
2452 =head1 Changed Internals
2453
2454 =over 4
2455
2456 =item *
2457
2458 perlapi.pod (a companion to perlguts) now attempts to document the
2459 internal API.
2460
2461 =item *
2462
2463 You can now build a really minimal perl called microperl.
2464 Building microperl does not require even running Configure;
2465 C<make -f Makefile.micro> should be enough.  Beware: microperl makes
2466 many assumptions, some of which may be too bold; the resulting
2467 executable may crash or otherwise misbehave in wondrous ways.
2468 For careful hackers only.
2469
2470 =item *
2471
2472 Added rsignal(), whichsig(), do_join(), op_clear, op_null,
2473 ptr_table_clear(), ptr_table_free(), sv_setref_uv(), and several UTF-8
2474 interfaces to the publicised API.  For the full list of the available
2475 APIs see L<perlapi>.
2476
2477 =item *
2478
2479 Made possible to propagate customised exceptions via croak()ing.
2480
2481 =item *
2482
2483 Now xsubs can have attributes just like subs.  (Well, at least the
2484 built-in attributes.)
2485
2486 =item *
2487
2488 dTHR and djSP have been obsoleted; the former removed (because it's
2489 a no-op) and the latter replaced with dSP.
2490
2491 =item *
2492
2493 PERL_OBJECT has been completely removed.
2494
2495 =item *
2496
2497 The MAGIC constants (e.g. C<'P'>) have been macrofied
2498 (e.g. C<PERL_MAGIC_TIED>) for better source code readability
2499 and maintainability.
2500
2501 =item *
2502
2503 The regex compiler now maintains a structure that identifies nodes in
2504 the compiled bytecode with the corresponding syntactic features of the
2505 original regex expression.  The information is attached to the new
2506 C<offsets> member of the C<struct regexp>. See L<perldebguts> for more
2507 complete information.
2508
2509 =item *
2510
2511 The C code has been made much more C<gcc -Wall> clean.  Some warning
2512 messages still remain in some platforms, so if you are compiling with
2513 gcc you may see some warnings about dubious practices.  The warnings
2514 are being worked on.
2515
2516 =item *
2517
2518 F<perly.c>, F<sv.c>, and F<sv.h> have now been extensively commented.
2519
2520 =item *
2521
2522 Documentation on how to use the Perl source repository has been added
2523 to F<Porting/repository.pod>.
2524
2525 =item *
2526
2527 There are now several profiling make targets.
2528
2529 =back
2530
2531 =head1 Security Vulnerability Closed
2532
2533 (This change was already made in 5.7.0 but bears repeating here.)
2534
2535 A potential security vulnerability in the optional suidperl component
2536 of Perl was identified in August 2000.  suidperl is neither built nor
2537 installed by default.  As of November 2001 the only known vulnerable
2538 platform is Linux, most likely all Linux distributions.  CERT and
2539 various vendors and distributors have been alerted about the vulnerability.
2540 See http://www.cpan.org/src/5.0/sperl-2000-08-05/sperl-2000-08-05.txt
2541 for more information.
2542
2543 The problem was caused by Perl trying to report a suspected security
2544 exploit attempt using an external program, /bin/mail.  On Linux
2545 platforms the /bin/mail program had an undocumented feature which
2546 when combined with suidperl gave access to a root shell, resulting in
2547 a serious compromise instead of reporting the exploit attempt.  If you
2548 don't have /bin/mail, or if you have 'safe setuid scripts', or if
2549 suidperl is not installed, you are safe.
2550
2551 The exploit attempt reporting feature has been completely removed from
2552 Perl 5.8.0 (and the maintenance release 5.6.1, and it was removed also
2553 from all the Perl 5.7 releases), so that particular vulnerability
2554 isn't there anymore.  However, further security vulnerabilities are,
2555 unfortunately, always possible.  The suidperl functionality is most
2556 probably going to be removed in Perl 5.10.  In any case, suidperl
2557 should only be used by security experts who know exactly what they are
2558 doing and why they are using suidperl instead of some other solution
2559 such as sudo ( see http://www.courtesan.com/sudo/ ).
2560
2561 =head1 New Tests
2562
2563 Several new tests have been added, especially for the F<lib>
2564 subsection.  There are now about 56 000 individual tests (spread over
2565 about 620 test scripts), in the regression suite (5.6.1 has about
2566 11700 tests, in 258 test scripts) Many of the new tests are introduced
2567 by the new modules, but still in general Perl is now more thoroughly
2568 tested.
2569
2570 Because of the large number of tests, running the regression suite
2571 will take considerably longer time than it used to: expect the suite
2572 to take up to 4-5 times longer to run than in perl 5.6.  In a really
2573 fast machine you can hope to finish the suite in about 6-8 minutes
2574 (wallclock time).
2575
2576 The tests are now reported in a different order than in earlier Perls.
2577 (This happens because the test scripts from under t/lib have been moved
2578 to be closer to the library/extension they are testing.)
2579
2580 =head1 Known Problems
2581
2582 =head2 AIX
2583
2584 =over 4
2585
2586 =item *
2587
2588 In AIX 4.2 Perl extensions that use C++ functions that use statics
2589 may have problems in that the statics are not getting initialized.
2590 In newer AIX releases this has been solved by linking Perl with
2591 the libC_r library, but unfortunately in AIX 4.2 the said library
2592 has an obscure bug where the various functions related to time
2593 (such as time() and gettimeofday()) return broken values, and
2594 therefore in AIX 4.2 Perl is not linked against the libC_r.
2595
2596 =item *
2597
2598 vac 5.0.0.0 May Produce Buggy Code For Perl
2599
2600 The AIX C compiler vac version 5.0.0.0 may produce buggy code,
2601 resulting in few random tests failing, but when the failing tests
2602 are run by hand, they succeed.  We suggest upgrading to at least
2603 vac version 5.0.1.0, that has been known to compile Perl correctly.
2604 "lslpp -L|grep vac.C" will tell you the vac version. See README.aix.
2605
2606 =item *
2607
2608 If building threaded Perl, you may get compilation warning from pp_sys.c:
2609
2610   "pp_sys.c", line 4651.39: 1506-280 (W) Function argument assignment between types "unsigned char*" and "const void*" is not allowed.
2611
2612 This is harmless; it is caused by the getnetbyaddr() and getnetbyaddr_r()
2613 having slightly different types for their first argument.
2614
2615 =back
2616
2617 =head2 Amiga Perl Invoking Mystery
2618
2619 One cannot call Perl using the C<volume:> syntax, that is, C<perl -v>
2620 works, but for example C<bin:perl -v> doesn't.  The exact reason isn't
2621 known but the current suspect is the F<ixemul> library.
2622
2623 =head2 mod_perl 1.26 Doesn't Build With Threaded Perl
2624
2625 Use mod_perl 1.27 or higher.
2626
2627 =head2 lib/ftmp-security tests warn 'system possibly insecure'
2628
2629 Don't panic.  Read INSTALL 'make test' section instead.
2630
2631 =head2  HP-UX lib/posix Subtest 9 Fails When LP64-Configured
2632
2633 If perl is configured with -Duse64bitall, the successful result of the
2634 subtest 10 of lib/posix may arrive before the successful result of the
2635 subtest 9, which confuses the test harness so much that it thinks the
2636 subtest 9 failed.
2637
2638 =head2 Linux With Sfio Fails op/misc Test 48
2639
2640 No known fix.
2641
2642 =head2 Mac OS X
2643
2644 The following tests are known to fail:
2645
2646  Failed Test                 Stat Wstat Total Fail  Failed  List of Failed
2647  -------------------------------------------------------------------------
2648  ../ext/DB_File/t/db-btree.t    0    11    ??   ??       %  ??
2649  ../ext/DB_File/t/db-recno.t              149    3   2.01%  61 63 65
2650  ../ext/POSIX/t/posix.t                    31    1   3.23%  10
2651
2652 If you are building on a UFS partition, you will also probably see
2653 t/op/stat.t subtest #9 fail.  This is caused by Darwin's UFS not
2654 supporting inode change time.
2655
2656 =head2 op/sprintf tests 91, 129, and 130
2657
2658 The op/sprintf tests 91, 129, and 130 are known to fail on some platforms.
2659 Examples include any platform using sfio, and Compaq/Tandem's NonStop-UX.
2660
2661 The test 91 is known to fail at QNX6 (nto), because C<sprintf '%e',0>
2662 incorrectly produces C<0.000000e+0> instead of C<0.000000e+00>.
2663
2664 For the tests 129 and 130 the failing platforms do not comply with
2665 the ANSI C Standard, line 19ff on page 134 of ANSI X3.159 1989 to
2666 be exact.  (They produce something other than "1" and "-1" when
2667 formatting 0.6 and -0.6 using the printf format "%.0f", most often
2668 they produce "0" and "-0".)
2669
2670 =head2 Failure of Thread (5.005-style) tests
2671
2672 B<Note that support for 5.005-style threading remains experimental
2673 and practically unsupported.>
2674
2675 The following tests are known to fail due to fundamental problems in
2676 the 5.005 threading implementation. These are not new failures--Perl
2677 5.005_0x has the same bugs, but didn't have these tests.
2678
2679  ../ext/List/Util/t/first.t         255 65280     7    4  57.14%  2 5-7
2680  ../lib/English.t                     2   512    54    2   3.70%  2-3
2681  ../lib/Filter/Simple/t/data.t                    6    3  50.00%  1-3
2682  ../lib/Filter/Simple/t/filter_onl                9    3  33.33%  1-2 5
2683  ../lib/autouse.t                                10    1  10.00%  4
2684  op/flip.t                                       15    1   6.67%  15
2685
2686 These failures are unlikely to get fixed as the 5.005-style
2687 threads are considered fundamentally broken.
2688
2689 =head2 UNICOS
2690
2691  Failed Test                 Stat Wstat Total Fail  Failed  List of Failed
2692  -------------------------------------------------------------------------
2693  ../ext/Socket/socketpair.t    1   256    45    1   2.22%  12
2694  ../lib/Math/Trig.t                       26    1   3.85%  25
2695  ../lib/warnings.t                       460    1   0.22%  425
2696  io/fs.t                                  36    1   2.78%  31
2697  op/numconvert.t                        1440   13   0.90%  208 509-510
2698  657-658 665-666 829-830 989-990 1149-1150
2699
2700 =head2 UNICOS and UNICOS/mk
2701
2702 The io/fs test #31 is failing because in UNICOS and UNICOS/mk the Perl
2703 truncate() cannot be used to grow the size of filehandles, only to
2704 reduce the size.  The workaround is to truncate files instead of
2705 filehandles.
2706
2707 =head2 UNICOS/mk
2708
2709 =over 4
2710
2711 =item *
2712
2713 During Configure the test
2714
2715     Guessing which symbols your C compiler and preprocessor define...
2716
2717 will probably fail with error messages like
2718
2719     CC-20 cc: ERROR File = try.c, Line = 3
2720       The identifier "bad" is undefined.
2721
2722       bad switch yylook 79bad switch yylook 79bad switch yylook 79bad switch yylook 79#ifdef A29K
2723       ^
2724
2725     CC-65 cc: ERROR File = try.c, Line = 3
2726       A semicolon is expected at this point.
2727
2728 This is caused by a bug in awk utility of UNICOS/mk.  You can ignore
2729 the error, but it does cause a slight problem: you cannot fully
2730 benefit from the h2ph utility (see L<h2ph>) that can be used to
2731 convert C headers to Perl libraries, mainly used to be able to access
2732 from Perl the constants defined using C preprocessor, cpp.  Because of
2733 the above error parts of the converted headers will be invisible.
2734 Luckily, these days the need for h2ph is rare.
2735
2736 =item *
2737
2738 If building Perl with the interpreter threads (ithreads), the
2739 getgrent(), getgrnam(), and getgrgid() functions cannot return the
2740 list of the group members due to a bug in the multithreaded support of
2741 UNICOS/mk.  What this means that in list context the functions will
2742 return only three values, not four.
2743
2744 =back
2745
2746 =head2 UTS
2747
2748 There are a few known test failures, see L<perluts>.
2749
2750 =head2 VMS
2751
2752 There should be no reported test failures with a default configuration,
2753 though there are a number of tests marked TODO that point to areas
2754 needing further debugging and/or porting work.
2755
2756 =head2 Win32
2757
2758 In multi-CPU boxes there are some problems with the I/O buffering:
2759 some output may appear twice.  The following Win32 failures are known
2760 as of 5.7.3:
2761
2762  Failed Test                 Stat Wstat Total Fail  Failed  List of Failed
2763  -------------------------------------------------------------------------
2764   ..\ext/threads/t/end.t                6    4  66.67%  3-6
2765
2766 =head2 Localising a Tied Variable Leaks Memory
2767
2768     use Tie::Hash;
2769     tie my %tie_hash => 'Tie::StdHash';
2770
2771     ...
2772
2773     local($tie_hash{Foo}) = 1; # leaks
2774
2775 Code like the above is known to leak memory every time the local()
2776 is executed.
2777
2778 =head2 z/OS (OS/390)
2779
2780 z/OS has rather many test failures but the situation is actually
2781 better than it was in 5.6.0, it's just that so many new modules and
2782 tests have been added.
2783
2784  Failed Test                 Stat Wstat Total Fail  Failed  List of Failed
2785  -------------------------------------------------------------------------
2786  ../ext/Data/Dumper/t/dumper.t              321    2   0.62%  311 314
2787  ../ext/IO/lib/IO/t/io_unix.t                 5    4  80.00%  2-5
2788  ../lib/utf8.t                               94   13  13.83%  27 30-31 43 46 73
2789                                                               76 79 82 85 88 91
2790                                                               94
2791  ../lib/Benchmark.t               1   256   159    1   0.63%  75
2792  ../lib/ExtUtils/t/Constant.t                27   19  70.37%  5-23
2793  ../lib/ExtUtils/t/Embed.t                    9    9 100.00%  1-9
2794  op/pat.t                                   864    9   1.04%  242-243 665 776
2795                                                               785 832-834 845
2796  op/sprintf.t                               224    3   1.34%  98 100 136
2797  op/tr.t                                     97    5   5.15%  63 71-74
2798  uni/fold.t                                 767    8   1.04%  25-26 62 169 196
2799                                                               648 697-698
2800  60 tests and 384 subtests skipped.
2801
2802 =head2 Localising Tied Arrays and Hashes Is Broken
2803
2804     local %tied_array;
2805
2806 doesn't work as one would expect: the old value is restored
2807 incorrectly.
2808
2809 =head2 Self-tying of Arrays and Hashes Is Forbidden
2810
2811 Self-tying of arrays and hashes is broken in rather deep and
2812 hard-to-fix ways.  As a stop-gap measure to avoid people from getting
2813 frustrated at the mysterious results (core dumps, most often) it is
2814 for now forbidden (you will get a fatal error even from an attempt).
2815
2816 =head2 Building Extensions Can Fail Because Of Largefiles
2817
2818 Some extensions like mod_perl are known to have issues with
2819 `largefiles', a change brought by Perl 5.6.0 in which file offsets
2820 default to 64 bits wide, where supported.  Modules may fail to compile
2821 at all or compile and work incorrectly.  Currently there is no good
2822 solution for the problem, but Configure now provides appropriate
2823 non-largefile ccflags, ldflags, libswanted, and libs in the %Config
2824 hash (e.g., $Config{ccflags_nolargefiles}) so the extensions that are
2825 having problems can try configuring themselves without the
2826 largefileness.  This is admittedly not a clean solution, and the
2827 solution may not even work at all.  One potential failure is whether
2828 one can (or, if one can, whether it's a good idea) link together at
2829 all binaries with different ideas about file offsets, all this is
2830 platform-dependent.
2831
2832 =head2 Unicode Support on EBCDIC Still Spotty
2833
2834 Though mostly working, Unicode support still has problem spots on
2835 EBCDIC platforms.  One such known spot are the C<\p{}> and C<\P{}>
2836 regular expression constructs for code points less than 256: the
2837 pP are testing for Unicode code points, not knowing about EBCDIC.
2838
2839 =head2 The Compiler Suite Is Still Experimental
2840
2841 The compiler suite is slowly getting better but it continues to be
2842 highly experimental.  Use in production environments is discouraged.
2843
2844 =head2 The Long Double Support Is Still Experimental
2845
2846 The ability to configure Perl's numbers to use "long doubles",
2847 floating point numbers of hopefully better accuracy, is still
2848 experimental.  The implementations of long doubles are not yet
2849 widespread and the existing implementations are not quite mature
2850 or standardised, therefore trying to support them is a rare
2851 and moving target.  The gain of more precision may also be offset
2852 by slowdown in computations (more bits to move around, and the
2853 operations are more likely to be executed by less optimised
2854 libraries).
2855
2856 =head2 Seen In Perl 5.7 But Gone Now
2857
2858 C<Time::Piece> (previously known as C<Time::Object>) was removed
2859 because it was felt that it didn't have enough value in it to be a
2860 core module.  It is still a useful module, though, and is available
2861 from the CPAN.
2862
2863 =head1 Reporting Bugs
2864
2865 If you find what you think is a bug, you might check the articles
2866 recently posted to the comp.lang.perl.misc newsgroup and the perl
2867 bug database at http://bugs.perl.org/  There may also be
2868 information at http://www.perl.com/ , the Perl Home Page.
2869
2870 If you believe you have an unreported bug, please run the B<perlbug>
2871 program included with your release.  Be sure to trim your bug down
2872 to a tiny but sufficient test case.  Your bug report, along with the
2873 output of C<perl -V>, will be sent off to perlbug@perl.org to be
2874 analysed by the Perl porting team.
2875
2876 =head1 SEE ALSO
2877
2878 The F<Changes> file for exhaustive details on what changed.
2879
2880 The F<INSTALL> file for how to build Perl.
2881
2882 The F<README> file for general stuff.
2883
2884 The F<Artistic> and F<Copying> files for copyright information.
2885
2886 =head1 HISTORY
2887
2888 Written by Jarkko Hietaniemi <F<jhi@iki.fi>>.
2889
2890 =cut