2 # Makefile to build perl on Windows using Microsoft NMAKE.
4 # Microsoft Visual C++ 6.0 or later
5 # Windows SDK 64-bit compiler and tools
7 # This is set up to build a perl.exe that runs off a shared library
8 # (perl513.dll). Also makes individual DLLs for the XS extensions.
12 ## Make sure you read README.win32 *before* you mess with anything here!
16 ## Build configuration. Edit the values below to suit your needs.
20 # Set these to wherever you want "nmake install" to put your
24 INST_TOP = $(INST_DRV)\perl
27 # Uncomment if you want to build a 32-bit Perl using a 32-bit compiler
28 # on a 64-bit version of Windows.
32 # Comment this out if you DON'T want your perl installation to be versioned.
33 # This means that the new installation will overwrite any files from the
34 # old installation at the same INST_TOP location. Leaving it enabled is
35 # the safest route, as perl adds the extra version directory to all the
36 # locations it installs files to. If you disable it, an alternative
37 # versioned installation can be obtained by setting INST_TOP above to a
38 # path that includes an arbitrary version string.
43 # Comment this out if you DON'T want your perl installation to have
44 # architecture specific components. This means that architecture-
45 # specific files will be installed along with the architecture-neutral
46 # files. Leaving it enabled is safer and more flexible, in case you
47 # want to build multiple flavors of perl and install them together in
48 # the same location. Commenting it out gives you a simpler
49 # installation that is easier to understand for beginners.
51 #INST_ARCH = \$(ARCHNAME)
54 # Uncomment this if you want perl to run
55 # $Config{sitelibexp}\sitecustomize.pl
56 # before anything else. This script can then be set up, for example,
57 # to add additional entries to @INC.
59 #USE_SITECUST = define
62 # uncomment to enable multiple interpreters. This is need for fork()
63 # emulation and for thread support.
68 # Beginnings of interpreter cloning/threads; now reasonably complete.
69 # This should be enabled to get the fork() emulation. This needs
75 # uncomment to enable the implicit "host" layer for all system calls
76 # made by perl. This needs USE_MULTI above. This is also needed to
82 # Comment out next assign to disable perl's I/O subsystem and use compiler's
83 # stdio for IO - depending on your compiler vendor and run time library you may
84 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
85 # You will also be unable to take full advantage of perl5.8's support for multiple
86 # encodings and may see lower IO performance. You have been warned.
90 # Comment this out if you don't want to enable large file support for
91 # some reason. Should normally only be changed to maintain compatibility
92 # with an older release of perl.
93 USE_LARGE_FILES = define
96 # uncomment exactly one of the following
98 # Visual C++ 6.x (aka Visual C++ 98)
100 # Visual C++ Toolkit 2003 (aka Visual C++ 7.x) (free command-line tools)
102 # Visual C++ .NET 2003 (aka Visual C++ 7.x) (full version)
104 # Windows Server 2003 SP1 Platform SDK (April 2005)
106 # Visual C++ 2005 Express Edition (aka Visual C++ 8.x) (free version)
108 # Visual C++ 2005 (aka Visual C++ 8.x) (full version)
110 # Visual C++ 2008 Express Edition (aka Visual C++ 9.x) (free version)
112 # Visual C++ 2008 (aka Visual C++ 9.x) (full version)
114 # Visual C++ 2010 Express Edition (aka Visual C++ 10.x) (free version)
115 #CCTYPE = MSVC100FREE
116 # Visual C++ 2010 (aka Visual C++ 10.x) (full version)
120 # uncomment next line if you want debug version of perl (big,slow)
121 # If not enabled, we automatically try to use maximum optimization
122 # with all compilers that are known to have a working optimizer.
127 # uncomment to enable linking with setargv.obj under the Visual C
128 # compiler. Setting this options enables perl to expand wildcards in
129 # arguments, but it may be harder to use alternate methods like
130 # File::DosGlob that are more powerful. This option is supported only with
133 #USE_SETARGV = define
136 # if you want to have the crypt() builtin function implemented, leave this or
137 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
138 # version of des_fcrypt().
143 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
144 # library, uncomment this, and make sure the library exists (see README.win32)
145 # Specify the full pathname of the library.
147 #CRYPT_LIB = fcrypt.lib
150 # set this if you wish to use perl's malloc
151 # WARNING: Turning this on/off WILL break binary compatibility with extensions
152 # you may have compiled with/without it. Be prepared to recompile all
153 # extensions if you change the default. Currently, this cannot be enabled
154 # if you ask for USE_IMP_SYS above.
156 #PERL_MALLOC = define
159 # set this to enable debugging mstats
160 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
161 # be enabled without PERL_MALLOC as well.
163 #DEBUG_MSTATS = define
166 # set this to additionally provide a statically linked perl-static.exe.
167 # Note that dynamic loading will not work with this perl, so you must
168 # include required modules statically using the STATIC_EXT or ALL_STATIC
169 # variables below. A static library perl513s.lib will also be created.
170 # Ordinary perl.exe is not affected by this option.
172 #BUILD_STATIC = define
175 # in addition to BUILD_STATIC the option ALL_STATIC makes *every*
176 # extension get statically built
177 # This will result in a very large perl executable, but the main purpose
178 # is to have proper linking set so as to be able to create miscellaneous
179 # executables with different built-in extensions
185 # set the install locations of the compiler include/libraries
186 # Running VCVARS32.BAT is *required* when using Visual C.
187 # Some versions of Visual C don't define MSVCDIR in the environment,
188 # so you may have to set CCHOME explicitly (spaces in the path name should
192 CCINCDIR = $(CCHOME)\include
193 CCLIBDIR = $(CCHOME)\lib
196 # Additional compiler flags can be specified here.
198 BUILDOPT = $(BUILDOPTEXTRA)
201 # Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
202 # internal hash function unless the PERL_HASH_SEED environment variable is set.
203 # Alternatively, adding -DNO_HASH_SEED will completely disable the
204 # randomization feature.
205 # The latter is required to maintain binary compatibility with Perl 5.8.0.
207 #BUILDOPT = $(BUILDOPT) -DPERL_HASH_SEED_EXPLICIT
208 #BUILDOPT = $(BUILDOPT) -DNO_HASH_SEED
211 # This should normally be disabled. Enabling it will disable the File::Glob
212 # implementation of CORE::glob.
214 #BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB
217 # This should normally be disabled. Enabling it causes perl to read scripts
218 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
220 #BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
223 # specify semicolon-separated list of extra directories that modules will
224 # look for libraries (spaces in path names need not be quoted)
229 # set this to your email address (perl will guess a value from
230 # from your loginname and your hostname, which may not be right)
235 ## Build configuration ends.
238 ##################### CHANGE THESE ONLY IF YOU MUST #####################
240 !IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
244 CRYPT_FLAG = -DHAVE_DES_FCRYPT
247 !IF "$(USE_IMP_SYS)" == "define"
252 !IF "$(PERL_MALLOC)" == ""
257 !IF "$(DEBUG_MSTATS)" == ""
261 !IF "$(DEBUG_MSTATS)" == "define"
262 BUILDOPT = $(BUILDOPT) -DPERL_DEBUGGING_MSTATS
265 !IF "$(USE_SITECUST)" == ""
269 !IF "$(USE_MULTI)" == ""
273 !IF "$(USE_ITHREADS)" == ""
277 !IF "$(USE_IMP_SYS)" == ""
281 !IF "$(USE_PERLIO)" == ""
285 !IF "$(USE_LARGE_FILES)" == ""
286 USE_LARGE_FILES = undef
289 !IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
293 !IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
297 !IF "$(USE_SITECUST)" == "define"
298 BUILDOPT = $(BUILDOPT) -DUSE_SITECUSTOMIZE
301 !IF "$(USE_MULTI)" != "undef"
302 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
305 !IF "$(USE_IMP_SYS)" != "undef"
306 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS
309 !IF "$(PROCESSOR_ARCHITECTURE)" == ""
310 PROCESSOR_ARCHITECTURE = x86
314 # When we are running from a 32bit cmd.exe on AMD64 then
315 # PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432
317 !IF "$(PROCESSOR_ARCHITEW6432)" != ""
318 PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432)
321 !IF "$(PROCESSOR_ARCHITECTURE)" == "AMD64" || "$(PROCESSOR_ARCHITECTURE)" == "IA64"
329 # Treat 64-bit MSVC60 (doesn't really exist) as SDK2003SP1 because
330 # both link against MSVCRT.dll (which is part of Windows itself) and
331 # not against a compiler specific versioned runtime.
332 !IF "$(WIN64)" == "define" && "$(CCTYPE)" == "MSVC60"
336 ARCHITECTURE = $(PROCESSOR_ARCHITECTURE)
337 !IF "$(ARCHITECTURE)" == "AMD64"
340 !IF "$(ARCHITECTURE)" == "IA64"
344 !IF "$(USE_MULTI)" == "define"
345 ARCHNAME = MSWin32-$(ARCHITECTURE)-multi
347 !IF "$(USE_PERLIO)" == "define"
348 ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio
350 ARCHNAME = MSWin32-$(ARCHITECTURE)
354 !IF "$(USE_PERLIO)" == "define"
355 BUILDOPT = $(BUILDOPT) -DUSE_PERLIO
358 !IF "$(USE_ITHREADS)" == "define"
359 ARCHNAME = $(ARCHNAME)-thread
362 # Visual C++ 98, .NET 2003, 2005/2008/2010 specific.
363 # VC++ 6/7/8/9/10.x can load DLLs on demand. Makes the test suite run
364 # in about 10% less time. (The free version of 7.x can't do this, but the free
365 # versions of 8/9/10.x can.)
366 !IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70" || \
367 "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
368 "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE" || \
369 "$(CCTYPE)" == "MSVC100" || "$(CCTYPE)" == "MSVC100FREE"
370 DELAYLOAD = -DELAYLOAD:ws2_32.dll delayimp.lib
373 # Visual C++ 2005 and 2008 (VC++ 8.x and 9.x) create manifest files for EXEs and
374 # DLLs. These either need copying everywhere with the binaries, or else need
375 # embedding in them otherwise MSVCR80.dll or MSVCR90.dll won't be found. For
376 # simplicity, embed them if they exist (and delete them afterwards so that they
377 # don't get installed too).
378 EMBED_EXE_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1 && \
379 if exist $@.manifest del $@.manifest
380 EMBED_DLL_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2 && \
381 if exist $@.manifest del $@.manifest
383 ARCHDIR = ..\lib\$(ARCHNAME)
384 COREDIR = ..\lib\CORE
385 AUTODIR = ..\lib\auto
391 EXTUTILSDIR = $(LIBDIR)\ExtUtils
395 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
396 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
397 INST_LIB = $(INST_TOP)$(INST_VER)\lib
398 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
399 INST_COREDIR = $(INST_ARCHLIB)\CORE
400 INST_HTML = $(INST_TOP)$(INST_VER)\html
403 # Programs to compile, build .lib files and link
408 LIB32 = $(LINK32) -lib
415 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
416 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
417 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
418 LOCDEFS = -DPERLDLL -DPERL_CORE
424 !IF "$(CFG)" == "Debug"
425 OPTIMIZE = -Od -MD -Zi -DDEBUGGING
428 OPTIMIZE = -MD -Zi -DNDEBUG
429 # we enable debug symbols in release builds also
430 LINK_DBG = -debug -opt:ref,icf
431 # you may want to enable this if you want COFF symbols in the executables
432 # in addition to the PDB symbols. The default Dr. Watson that ships with
433 # Windows can use the the former but not latter. The free WinDbg can be
434 # installed to get better stack traces from just the PDB symbols, so we
435 # avoid the bloat of COFF symbols by default.
436 #LINK_DBG = $(LINK_DBG) -debugtype:both
437 ! IF "$(WIN64)" == "define"
438 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
439 OPTIMIZE = $(OPTIMIZE) -Ox -GL
440 LINK_DBG = $(LINK_DBG) -ltcg
442 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
443 OPTIMIZE = $(OPTIMIZE) -O1
444 #OPTIMIZE = $(OPTIMIZE) -O2
448 !IF "$(WIN64)" == "define"
449 DEFINES = $(DEFINES) -DWIN64 -DCONSERVATIVE
450 OPTIMIZE = $(OPTIMIZE) -fp:precise
453 # For now, silence VC++ 8/9/10.x's warnings about "unsafe" CRT functions
454 # and POSIX CRT function names being deprecated.
455 !IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
456 "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE" || \
457 "$(CCTYPE)" == "MSVC100" || "$(CCTYPE)" == "MSVC100FREE"
458 DEFINES = $(DEFINES) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE
461 # In VS 2005 (VC++ 8.0) Microsoft changes time_t from 32-bit to
462 # 64-bit, even in 32-bit mode. It also provides the _USE_32BIT_TIME_T
463 # preprocessor option to revert back to the old functionality for
464 # backward compatibility. We define this symbol here for older 32-bit
465 # compilers only (which aren't using it at all) for the sole purpose
466 # of getting it into $Config{ccflags}. That way if someone builds
467 # Perl itself with e.g. VC6 but later installs an XS module using VC8
468 # the time_t types will still be compatible.
469 !IF "$(WIN64)" == "undef"
470 ! IF "$(CCTYPE)" == "MSVC60" || \
471 "$(CCTYPE)" == "MSVC70" || "$(CCTYPE)" == "MSVC70FREE"
472 BUILDOPT = $(BUILDOPT) -D_USE_32BIT_TIME_T
476 # Use the MSVCRT read() fix only when using VC++ 6.x or earlier. Later
477 # versions use MSVCR70.dll, MSVCR71.dll, etc, which do not require the
479 !IF "$(CCTYPE)" == "MSVC60"
480 BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX
483 LIBBASEFILES = $(CRYPT_LIB) \
484 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
485 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
486 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
487 version.lib odbc32.lib odbccp32.lib comctl32.lib
489 # The 64 bit Windows Server 2003 SP1 SDK compilers link against MSVCRT.dll, which
490 # doesn't include the buffer overrun verification code used by the /GS switch.
491 # Since the code links against libraries that are compiled with /GS, this
492 # "security cookie verification" code must be included via bufferoverflow.lib.
493 !IF "$(WIN64)" == "define" && "$(CCTYPE)" == "SDK2003SP1"
494 LIBBASEFILES = $(LIBBASEFILES) bufferoverflowU.lib
497 LIBFILES = $(LIBBASEFILES) $(LIBC)
499 #EXTRACFLAGS = -nologo -GF -W4 -wd4127 -wd4706
500 EXTRACFLAGS = -nologo -GF -W3
501 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
502 $(PCHFLAGS) $(OPTIMIZE)
503 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
504 -libpath:"$(INST_COREDIR)" \
505 -machine:$(PROCESSOR_ARCHITECTURE)
510 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
512 !IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
513 "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE" || \
514 "$(CCTYPE)" == "MSVC100" || "$(CCTYPE)" == "MSVC100FREE"
515 LINK_FLAGS = $(LINK_FLAGS) "/manifestdependency:type='Win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' processorArchitecture='*' publicKeyToken='6595b64144ccf1df' language='*'"
517 RSC_FLAGS = -DINCLUDE_MANIFEST
521 #################### do not edit below this line #######################
522 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
530 .SUFFIXES : .c $(o) .dll .lib .exe .rc .res
533 $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
539 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
540 -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
544 $(RSC) -i.. $(RSC_FLAGS) $<
549 # makedef.pl must be updated if this changes, and this should normally
550 # only change when there is an incompatible revision of the public API.
551 PERLIMPLIB = ..\perl513.lib
552 PERLSTATICLIB = ..\perl513s.lib
553 PERLDLL = ..\perl513.dll
555 MINIPERL = ..\miniperl.exe
557 PERLEXE = ..\perl.exe
558 WPERLEXE = ..\wperl.exe
559 PERLEXESTATIC = ..\perl-static.exe
560 GLOBEXE = ..\perlglob.exe
561 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
562 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
564 GENUUDMAP = ..\generate_uudmap.exe
565 !IF "$(BUILD_STATIC)" == "define"
571 # Unicode data files generated by mktables
572 FIRSTUNIFILE = ..\lib\unicore\Decomposition.pl
573 UNIDATAFILES = ..\lib\unicore\Decomposition.pl \
574 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
575 ..\lib\unicore\Heavy.pl ..\lib\unicore\mktables.lst \
576 ..\lib\unicore\TestProp.pl
578 # Directories of Unicode data files generated by mktables
579 UNIDATADIR1 = ..\lib\unicore\To
580 UNIDATADIR2 = ..\lib\unicore\lib
582 PERLEXE_MANIFEST= .\perlexe.manifest
583 PERLEXE_ICO = .\perlexe.ico
584 PERLEXE_RES = .\perlexe.res
587 # Nominate a target which causes extensions to be re-built
588 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
589 # on and really only the interface - i.e. the .def file used to export symbols
591 PERLDEP = perldll.def
593 PL2BAT = bin\pl2bat.pl
594 GLOBBAT = bin\perlglob.bat
610 ..\utils\config_data \
618 ..\utils\cpanp-run-perl \
635 !IF "$(WIN64)" == "define"
636 CFGSH_TMPL = config.vc64
637 CFGH_TMPL = config_H.vc64
639 CFGSH_TMPL = config.vc
640 CFGH_TMPL = config_H.vc
643 XCOPY = xcopy /f /r /i /d /y
644 RCOPY = xcopy /f /r /i /e /d /y
687 EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c
689 !IF "$(PERL_MALLOC)" == "define"
690 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c
693 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c
700 # We need this for miniperl build unless we override canned
701 # config.h #define building mini\*
702 #!IF "$(USE_PERLIO)" == "define"
703 WIN32_SRC = $(WIN32_SRC) .\win32io.c
706 !IF "$(CRYPT_SRC)" != ""
707 WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)
754 .\include\sys\socket.h \
757 CORE_H = $(CORE_NOCFG_H) .\config.h ..\git_version.h
759 UUDMAP_H = ..\uudmap.h
760 BITCOUNT_H = ..\bitcount.h
762 MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)
763 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
764 WIN32_OBJ = $(WIN32_SRC:.c=.obj)
765 MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \
766 $(MINIDIR)\miniperlmain$(o) \
767 $(MINIDIR)\perlio$(o)
768 MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\)
769 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
770 DLL_OBJ = $(DYNALOADER)
771 X2P_OBJ = $(X2P_SRC:.c=.obj)
772 GENUUDMAP_OBJ = $(GENUUDMAP:.exe=.obj)
774 PERLDLL_OBJ = $(CORE_OBJ)
775 PERLEXE_OBJ = perlmain$(o)
776 PERLEXEST_OBJ = perlmainst$(o)
778 PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
780 !IF "$(USE_SETARGV)" != ""
781 SETARGV_OBJ = setargv$(o)
784 !IF "$(ALL_STATIC)" == "define"
785 # some exclusions, unfortunately, until fixed:
786 # - Win32 extension contains overlapped symbols with win32.c (BUG!)
787 # - MakeMaker isn't capable enough for SDBM_File (smaller bug)
788 # - Encode (encoding search algorithm relies on shared library?)
789 STATIC_EXT = * !Win32 !SDBM_File !Encode
791 # specify static extensions here, for example:
792 #STATIC_EXT = Cwd Compress/Raw/Zlib
793 STATIC_EXT = Win32CORE
796 DYNALOADER = ..\DynaLoader$(o)
799 "INST_DRV=$(INST_DRV)" \
800 "INST_TOP=$(INST_TOP)" \
801 "INST_VER=$(INST_VER)" \
802 "INST_ARCH=$(INST_ARCH)" \
803 "archname=$(ARCHNAME)" \
806 "ccflags=$(EXTRACFLAGS) $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \
807 "cf_email=$(EMAIL)" \
808 "d_crypt=$(D_CRYPT)" \
809 "d_mymalloc=$(PERL_MALLOC)" \
811 "incpath=$(CCINCDIR:"=\")" \
812 "libperl=$(PERLIMPLIB:..\=)" \
813 "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
815 "make=$(MAKE_BARE)" \
816 "static_ext=$(STATIC_EXT)" \
817 "usethreads=$(USE_ITHREADS)" \
818 "useithreads=$(USE_ITHREADS)" \
819 "usemultiplicity=$(USE_MULTI)" \
820 "useperlio=$(USE_PERLIO)" \
821 "uselargefiles=$(USE_LARGE_FILES)" \
822 "usesitecustomize=$(USE_SITECUST)" \
823 "LINK_FLAGS=$(LINK_FLAGS:"=\")" \
824 "optimize=$(OPTIMIZE:"=\")"
826 ICWD = -I..\dist\Cwd -I..\dist\Cwd\lib
832 all : .\config.h ..\git_version.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) \
833 $(UNIDATAFILES) MakePPPort $(PERLEXE) $(X2P) Extensions_nonxs Extensions $(PERLSTATIC)
834 @echo Everything is up to date. '$(MAKE_BARE) test' to run test suite.
836 regnodes : ..\regnodes.h
838 ..\regcomp$(o) : ..\regnodes.h ..\regcharclass.h
840 ..\regexec$(o) : ..\regnodes.h ..\regcharclass.h
842 reonly : regnodes .\config.h ..\git_version.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) \
843 $(UNIDATAFILES) $(PERLEXE) $(X2P) Extensions_reonly
844 @echo Perl and 're' are up to date.
846 static: $(PERLEXESTATIC)
848 #------------------------------------------------------------
850 $(GLOBEXE) : perlglob$(o)
851 $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
852 perlglob$(o) setargv$(o)
855 perlglob$(o) : perlglob.c
857 config.w32 : $(CFGSH_TMPL)
858 copy $(CFGSH_TMPL) config.w32
860 .\config.h : $(CFGH_TMPL)
862 copy $(CFGH_TMPL) config.h
864 ..\git_version.h : $(MINIPERL) ..\make_patchnum.pl
866 miniperl -Ilib make_patchnum.pl
869 # make sure that we recompile perl.c if the git version changes
870 ..\perl$(o) : ..\git_version.h
872 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL
873 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
875 # this target is for when changes to the main config.sh happen.
876 # edit config.vc, then make perl in a minimal configuration (i.e. with MULTI,
877 # ITHREADS, IMP_SYS, LARGE_FILES, PERLIO and CRYPT off), then make this target
878 # to regenerate config_H.vc.
879 # repeat for config.vc64 and config_H.vc64 if you have a suitable build
880 # environment, otherwise hand-edit them to maintain the same differences with
881 # config.vc and config_H.vc as before.
882 # unfortunately, some further manual editing is also then required to restore all
883 # the special __GNUC__ handling that is otherwise lost.
885 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
886 $(MINIPERL) -I..\lib ..\configpm --chdir=..
888 -$(MINIPERL) -I..\lib $(ICWD) config_h.PL "INST_VER=$(INST_VER)"
889 rename config.h $(CFGH_TMPL)
891 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
892 $(MINIPERL) -I..\lib ..\configpm --chdir=..
893 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
894 $(XCOPY) ..\*.h $(COREDIR)\*.*
895 $(XCOPY) *.h $(COREDIR)\*.*
896 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
897 $(RCOPY) include $(COREDIR)\*.*
898 -$(MINIPERL) -I..\lib $(ICWD) config_h.PL "INST_VER=$(INST_VER)"
899 if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
901 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
902 $(LINK32) -subsystem:console -out:$@ @<<
903 $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
908 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
910 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
911 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ ..\$(*F).c
913 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
914 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
916 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
917 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
918 !IF "$(USE_IMP_SYS)" == "define"
919 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
920 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
923 # 1. we don't want to rebuild miniperl.exe when config.h changes
924 # 2. we don't want to rebuild miniperl.exe with non-default config.h
925 # 3. we can't have miniperl.exe depend on git_version.h, as miniperl creates it
926 $(MINI_OBJ) : $(CORE_NOCFG_H)
928 $(WIN32_OBJ) : $(CORE_H)
929 $(CORE_OBJ) : $(CORE_H)
930 $(DLL_OBJ) : $(CORE_H)
931 $(X2P_OBJ) : $(CORE_H)
933 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl create_perllibst_h.pl
934 $(MINIPERL) -I..\lib create_perllibst_h.pl
935 $(MINIPERL) -I..\lib -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
936 CCTYPE=$(CCTYPE) > perldll.def
938 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
939 $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @Extensions_static @<<
940 $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
943 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
945 $(PERLSTATICLIB): Extensions_static
946 $(LIB32) $(LIB_FLAGS) -out:$@ @Extensions_static @<<
949 $(XCOPY) $(PERLSTATICLIB) $(COREDIR)
951 $(PERLEXE_RES): perlexe.rc $(PERLEXE_MANIFEST) $(PERLEXE_ICO)
953 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
955 miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
958 ..\x2p\a2p$(o) : ..\x2p\a2p.c
959 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
961 ..\x2p\hash$(o) : ..\x2p\hash.c
962 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
964 ..\x2p\str$(o) : ..\x2p\str.c
965 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
967 ..\x2p\util$(o) : ..\x2p\util.c
968 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
970 ..\x2p\walk$(o) : ..\x2p\walk.c
971 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
973 $(X2P) : $(MINIPERL) $(X2P_OBJ) Extensions
974 $(MINIPERL) -I..\lib ..\x2p\find2perl.PL
975 $(MINIPERL) -I..\lib ..\x2p\s2p.PL
976 $(LINK32) -subsystem:console -out:$@ @<<
977 $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
981 $(MINIDIR)\globals$(o) : $(UUDMAP_H) $(BITCOUNT_H)
983 $(UUDMAP_H) : $(BITCOUNT_H)
985 $(BITCOUNT_H) : $(GENUUDMAP)
986 $(GENUUDMAP) $(UUDMAP_H) $(BITCOUNT_H)
988 $(GENUUDMAP) : $(GENUUDMAP_OBJ)
989 $(LINK32) -subsystem:console -out:$@ @<<
990 $(LINK_FLAGS) $(LIBFILES) $(GENUUDMAP_OBJ)
994 perlmain.c : runperl.c
995 copy runperl.c perlmain.c
997 perlmain$(o) : perlmain.c
998 $(CC) $(CFLAGS_O:-DPERLDLL=-UPERLDLL) $(OBJOUT_FLAG)$@ -c perlmain.c
1000 perlmainst.c : runperl.c
1001 copy runperl.c perlmainst.c
1003 perlmainst$(o) : perlmainst.c
1004 $(CC) $(CFLAGS_O) $(OBJOUT_FLAG)$@ -c perlmainst.c
1006 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1007 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
1008 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1010 copy $(PERLEXE) $(WPERLEXE)
1011 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1013 $(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES)
1014 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
1015 @Extensions_static $(PERLSTATICLIB) /PDB:NONE \
1016 $(LIBFILES) $(PERLEXEST_OBJ) $(SETARGV_OBJ) $(PERLEXE_RES)
1019 MakePPPort: $(MINIPERL) $(CONFIGPM) Extensions_nonxs
1020 $(MINIPERL) -I..\lib $(ICWD) ..\mkppport
1022 #-------------------------------------------------------------------------------
1023 # There's no direct way to mark a dependency on
1024 # DynaLoader.pm, so this will have to do
1025 Extensions: ..\make_ext.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
1026 $(XCOPY) ..\*.h $(COREDIR)\*.*
1027 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic
1029 Extensions_reonly: ..\make_ext.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
1030 $(XCOPY) ..\*.h $(COREDIR)\*.*
1031 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic +re
1033 Extensions_static : ..\make_ext.pl list_static_libs.pl $(PERLDEP) $(CONFIGPM)
1034 $(XCOPY) ..\*.h $(COREDIR)\*.*
1035 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --static
1036 $(MINIPERL) -I..\lib list_static_libs.pl > Extensions_static
1038 Extensions_nonxs: ..\make_ext.pl $(PERLDEP) $(CONFIGPM)
1039 $(XCOPY) ..\*.h $(COREDIR)\*.*
1040 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --nonxs
1042 $(DYNALOADER) : ..\make_ext.pl $(PERLDEP) $(CONFIGPM) Extensions_nonxs
1043 $(XCOPY) ..\*.h $(COREDIR)\*.*
1044 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --dynaloader
1047 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=clean
1049 Extensions_realclean:
1050 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=realclean
1052 #-------------------------------------------------------------------------------
1054 doc: $(PERLEXE) ..\pod\perltoc.pod
1055 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
1056 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
1057 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1059 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1060 # so please check that script before making structural changes here
1062 utils: $(PERLEXE) $(X2P)
1064 $(MAKE) PERL=$(MINIPERL)
1066 copy ..\README.aix ..\pod\perlaix.pod
1067 copy ..\README.amiga ..\pod\perlamiga.pod
1068 copy ..\README.apollo ..\pod\perlapollo.pod
1069 copy ..\README.beos ..\pod\perlbeos.pod
1070 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1071 copy ..\README.ce ..\pod\perlce.pod
1072 copy ..\README.cn ..\pod\perlcn.pod
1073 copy ..\README.cygwin ..\pod\perlcygwin.pod
1074 copy ..\README.dgux ..\pod\perldgux.pod
1075 copy ..\README.dos ..\pod\perldos.pod
1076 copy ..\README.epoc ..\pod\perlepoc.pod
1077 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1078 copy ..\README.haiku ..\pod\perlhaiku.pod
1079 copy ..\README.hpux ..\pod\perlhpux.pod
1080 copy ..\README.hurd ..\pod\perlhurd.pod
1081 copy ..\README.irix ..\pod\perlirix.pod
1082 copy ..\README.jp ..\pod\perljp.pod
1083 copy ..\README.ko ..\pod\perlko.pod
1084 copy ..\README.linux ..\pod\perllinux.pod
1085 copy ..\README.macos ..\pod\perlmacos.pod
1086 copy ..\README.macosx ..\pod\perlmacosx.pod
1087 copy ..\README.mpeix ..\pod\perlmpeix.pod
1088 copy ..\README.netware ..\pod\perlnetware.pod
1089 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1090 copy ..\README.os2 ..\pod\perlos2.pod
1091 copy ..\README.os390 ..\pod\perlos390.pod
1092 copy ..\README.os400 ..\pod\perlos400.pod
1093 copy ..\README.plan9 ..\pod\perlplan9.pod
1094 copy ..\README.qnx ..\pod\perlqnx.pod
1095 copy ..\README.riscos ..\pod\perlriscos.pod
1096 copy ..\README.solaris ..\pod\perlsolaris.pod
1097 copy ..\README.symbian ..\pod\perlsymbian.pod
1098 copy ..\README.tru64 ..\pod\perltru64.pod
1099 copy ..\README.tw ..\pod\perltw.pod
1100 copy ..\README.uts ..\pod\perluts.pod
1101 copy ..\README.vmesa ..\pod\perlvmesa.pod
1102 copy ..\README.vos ..\pod\perlvos.pod
1103 copy ..\README.win32 ..\pod\perlwin32.pod
1104 copy ..\pod\perldelta.pod ..\pod\perl5137delta.pod
1106 $(PERLEXE) $(PL2BAT) $(UTILS)
1107 $(PERLEXE) $(ICWD) ..\autodoc.pl ..
1108 $(PERLEXE) $(ICWD) ..\pod\perlmodlib.pl -q
1110 ..\pod\perltoc.pod: $(PERLEXE) Extensions Extensions_nonxs
1111 $(PERLEXE) -f ..\pod\buildtoc --build-toc -q
1113 # Note that the pod cleanup in this next section is parsed (and regenerated
1114 # by pod/buildtoc so please check that script before making changes here
1116 distclean: realclean
1117 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1118 $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD) \
1119 $(PERLEXESTATIC) $(PERLSTATICLIB)
1121 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1122 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1123 -del /f $(LIBDIR)\.exists $(LIBDIR)\attributes.pm $(LIBDIR)\DynaLoader.pm
1124 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1125 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1126 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1127 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1128 -del /f $(LIBDIR)\File\Glob.pm
1129 -del /f $(LIBDIR)\Storable.pm
1130 -del /f $(LIBDIR)\Sys\Hostname.pm
1131 -del /f $(LIBDIR)\Time\HiRes.pm
1132 -del /f $(LIBDIR)\Unicode\Normalize.pm
1133 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1134 -del /f $(LIBDIR)\Win32.pm
1135 -del /f $(LIBDIR)\Win32CORE.pm
1136 -del /f $(LIBDIR)\Win32API\File.pm
1137 -del /f $(LIBDIR)\Win32API\File\cFile.pc
1138 -del /f $(DISTDIR)\XSLoader\XSLoader.pm
1139 -if exist $(LIBDIR)\App rmdir /s /q $(LIBDIR)\App
1140 -if exist $(LIBDIR)\Archive rmdir /s /q $(LIBDIR)\Archive
1141 -if exist $(LIBDIR)\Attribute rmdir /s /q $(LIBDIR)\Attribute
1142 -if exist $(LIBDIR)\autodie rmdir /s /q $(LIBDIR)\autodie
1143 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1144 -if exist $(LIBDIR)\CGI rmdir /s /q $(LIBDIR)\CGI
1145 -if exist $(LIBDIR)\CPAN rmdir /s /q $(LIBDIR)\CPAN
1146 -if exist $(LIBDIR)\CPANPLUS rmdir /s /q $(LIBDIR)\CPANPLUS
1147 -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
1148 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1149 -if exist $(LIBDIR)\Devel rmdir /s /q $(LIBDIR)\Devel
1150 -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest
1151 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1152 -if exist $(LIBDIR)\encoding rmdir /s /q $(LIBDIR)\encoding
1153 -if exist $(LIBDIR)\ExtUtils\CBuilder rmdir /s /q $(LIBDIR)\ExtUtils\CBuilder
1154 -if exist $(LIBDIR)\ExtUtils\Command rmdir /s /q $(LIBDIR)\ExtUtils\Command
1155 -if exist $(LIBDIR)\ExtUtils\Constant rmdir /s /q $(LIBDIR)\ExtUtils\Constant
1156 -if exist $(LIBDIR)\ExtUtils\Liblist rmdir /s /q $(LIBDIR)\ExtUtils\Liblist
1157 -if exist $(LIBDIR)\ExtUtils\MakeMaker rmdir /s /q $(LIBDIR)\ExtUtils\MakeMaker
1158 -if exist $(LIBDIR)\File\Spec rmdir /s /q $(LIBDIR)\File\Spec
1159 -if exist $(LIBDIR)\Filter rmdir /s /q $(LIBDIR)\Filter
1160 -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
1161 -if exist $(LIBDIR)\I18N\LangTags rmdir /s /q $(LIBDIR)\I18N\LangTags
1162 -if exist $(LIBDIR)\inc rmdir /s /q $(LIBDIR)\inc
1163 -if exist $(LIBDIR)\Module\Pluggable rmdir /s /q $(LIBDIR)\Module\Pluggable
1164 -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
1165 -if exist $(LIBDIR)\IPC rmdir /s /q $(LIBDIR)\IPC
1166 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1167 -if exist $(LIBDIR)\Locale rmdir /s /q $(LIBDIR)\Locale
1168 -if exist $(LIBDIR)\Log rmdir /s /q $(LIBDIR)\Log
1169 -if exist $(LIBDIR)\Math rmdir /s /q $(LIBDIR)\Math
1170 -if exist $(LIBDIR)\Memoize rmdir /s /q $(LIBDIR)\Memoize
1171 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1172 -if exist $(LIBDIR)\Module rmdir /s /q $(LIBDIR)\Module
1173 -if exist $(LIBDIR)\mro rmdir /s /q $(LIBDIR)\mro
1174 -if exist $(LIBDIR)\Net\FTP rmdir /s /q $(LIBDIR)\Net\FTP
1175 -if exist $(LIBDIR)\Object rmdir /s /q $(LIBDIR)\Object
1176 -if exist $(LIBDIR)\Package rmdir /s /q $(LIBDIR)\Package
1177 -if exist $(LIBDIR)\Params rmdir /s /q $(LIBDIR)\Params
1178 -if exist $(LIBDIR)\Parse rmdir /s /q $(LIBDIR)\Parse
1179 -if exist $(LIBDIR)\PerlIO rmdir /s /q $(LIBDIR)\PerlIO
1180 -if exist $(LIBDIR)\Pod\Perldoc rmdir /s /q $(LIBDIR)\Pod\Perldoc
1181 -if exist $(LIBDIR)\Pod\Simple rmdir /s /q $(LIBDIR)\Pod\Simple
1182 -if exist $(LIBDIR)\Pod\Text rmdir /s /q $(LIBDIR)\Pod\Text
1183 -if exist $(LIBDIR)\re rmdir /s /q $(LIBDIR)\re
1184 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1185 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1186 -if exist $(LIBDIR)\TAP rmdir /s /q $(LIBDIR)\TAP
1187 -if exist $(LIBDIR)\Term\UI rmdir /s /q $(LIBDIR)\Term\UI
1188 -if exist $(LIBDIR)\Test rmdir /s /q $(LIBDIR)\Test
1189 -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread
1190 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1191 -if exist $(LIBDIR)\Tie\Hash rmdir /s /q $(LIBDIR)\Tie\Hash
1192 -if exist $(LIBDIR)\Unicode\Collate rmdir /s /q $(LIBDIR)\Unicode\Collate
1193 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1194 -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
1195 -cd $(PODDIR) && del /f *.html *.bat \
1196 perl5137delta.pod perlaix.pod perlamiga.pod perlapi.pod \
1197 perlapollo.pod perlbeos.pod perlbs2000.pod perlce.pod \
1198 perlcn.pod perlcygwin.pod perldgux.pod perldos.pod perlepoc.pod \
1199 perlfreebsd.pod perlhaiku.pod perlhpux.pod perlhurd.pod \
1200 perlintern.pod perlirix.pod perljp.pod perlko.pod perllinux.pod \
1201 perlmacos.pod perlmacosx.pod perlmodlib.pod perlmpeix.pod \
1202 perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \
1203 perlos400.pod perlplan9.pod perlqnx.pod perlriscos.pod \
1204 perlsolaris.pod perlsymbian.pod perltoc.pod perltru64.pod \
1205 perltw.pod perluniprops.pod perluts.pod perlvmesa.pod \
1206 perlvos.pod perlwin32.pod
1207 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1208 perldoc perlivp dprofpp libnetcfg enc2xs piconv cpan *.bat \
1209 xsubpp instmodsh prove ptar ptardiff ptargrep cpanp-run-perl cpanp cpan2dist shasum corelist config_data
1210 -cd ..\x2p && del /f find2perl s2p psed *.bat
1211 -del /f ..\config.sh perlmain.c dlutils.c config.h.new \
1214 -del /f ..\lib\Config_git.pl
1217 -del /f $(PERLEXE_RES) perl.base
1218 -cd .. && del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib ppport.h
1219 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1220 -cd $(DISTDIR) && del /s *.def Makefile Makefile.old
1221 -cd $(CPANDIR) && del /s *.def Makefile Makefile.old
1222 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1223 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1224 -if exist pod2htmd.tmp del pod2htmd.tmp
1225 -if exist pod2htmi.tmp del pod2htmi.tmp
1226 -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
1227 -del /f ..\t\test_state
1229 install : all installbare installhtml
1231 installbare : utils ..\pod\perltoc.pod
1232 $(PERLEXE) ..\installperl
1233 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1234 if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\*.*
1235 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1236 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1237 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1238 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1241 $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*
1243 inst_lib : $(CONFIGPM)
1244 $(RCOPY) ..\lib $(INST_LIB)\*.*
1246 $(UNIDATAFILES) ..\pod\perluniprops.pod : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables Extensions_nonxs
1247 cd ..\lib\unicore && \
1248 ..\$(MINIPERL) -I.. -I..\..\dist\Cwd\lib -I..\..\dist\Cwd mktables -P ..\..\pod -maketest -makelist -p -check $@ $(FIRSTUNIFILE)
1250 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils $(UNIDATAFILES)
1251 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1252 if exist ..\t\perl.exe del /f ..\t\perl.exe
1253 rename ..\t\miniperl.exe perl.exe
1254 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1257 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1259 test-prep : all utils
1260 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1261 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1262 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1266 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1269 test-reonly : reonly utils
1270 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1271 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1272 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1274 $(PERLEXE) -I..\lib harness $(OPT) -re \bre\\/ $(EXTRA)
1282 test-notty : test-prep
1283 set PERL_SKIP_TTY_TEST=1
1285 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1289 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1290 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1291 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1293 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1297 -@$(DEL) miniperlmain$(o)
1298 -@$(DEL) $(MINIPERL)
1299 -@$(DEL) perlglob$(o)
1300 -@$(DEL) perlmain$(o)
1301 -@$(DEL) perlmainst$(o)
1304 -@$(DEL) ..\git_version.h
1307 -@$(DEL) $(WPERLEXE)
1308 -@$(DEL) $(PERLEXESTATIC)
1309 -@$(DEL) $(PERLSTATICLIB)
1311 -@$(DEL) $(CORE_OBJ)
1312 -@$(DEL) $(GENUUDMAP) $(GENUUDMAP_OBJ) $(UUDMAP_H) $(BITCOUNT_H)
1313 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1314 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1315 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1316 -@$(DEL) $(UNIDATAFILES)
1317 -@$(DEL) $(WIN32_OBJ)
1320 -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
1321 -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat
1322 -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat
1325 -@$(DEL) Extensions_static
1327 clean : Extensions_clean _clean
1329 realclean : Extensions_realclean _clean
1331 # Handy way to run perlbug -ok without having to install and run the
1332 # installed perlbug. We don't re-run the tests here - we trust the user.
1333 # Please *don't* use this unless all tests pass.
1334 # If you want to report test failures, use "nmake nok" instead.
1336 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1339 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1342 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1345 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok