5 perlebcdic - Considerations for running Perl on EBCDIC platforms
9 An exploration of some of the issues facing Perl programmers
10 on EBCDIC based computers. We do not cover localization,
11 internationalization, or multi-byte character set issues other
12 than some discussion of UTF-8 and UTF-EBCDIC.
14 Portions that are still incomplete are marked with XXX.
16 Perl used to work on EBCDIC machines, but there are now areas of the code where
17 it doesn't. If you want to use Perl on an EBCDIC machine, please let us know
18 by sending mail to perlbug@perl.org
20 =head1 COMMON CHARACTER CODE SETS
24 The American Standard Code for Information Interchange (ASCII or US-ASCII) is a
26 integers running from 0 to 127 (decimal) that imply character
27 interpretation by the display and other systems of computers.
28 The range 0..127 can be covered by setting the bits in a 7-bit binary
29 digit, hence the set is sometimes referred to as "7-bit ASCII".
30 ASCII was described by the American National Standards Institute
31 document ANSI X3.4-1986. It was also described by ISO 646:1991
32 (with localization for currency symbols). The full ASCII set is
33 given in the table below as the first 128 elements. Languages that
34 can be written adequately with the characters in ASCII include
35 English, Hawaiian, Indonesian, Swahili and some Native American
38 There are many character sets that extend the range of integers
39 from 0..2**7-1 up to 2**8-1, or 8 bit bytes (octets if you prefer).
40 One common one is the ISO 8859-1 character set.
44 The ISO 8859-$n are a collection of character code sets from the
45 International Organization for Standardization (ISO), each of which
46 adds characters to the ASCII set that are typically found in European
47 languages, many of which are based on the Roman, or Latin, alphabet.
49 =head2 Latin 1 (ISO 8859-1)
51 A particular 8-bit extension to ASCII that includes grave and acute
52 accented Latin characters. Languages that can employ ISO 8859-1
53 include all the languages covered by ASCII as well as Afrikaans,
54 Albanian, Basque, Catalan, Danish, Faroese, Finnish, Norwegian,
55 Portuguese, Spanish, and Swedish. Dutch is covered albeit without
56 the ij ligature. French is covered too but without the oe ligature.
57 German can use ISO 8859-1 but must do so without German-style
58 quotation marks. This set is based on Western European extensions
59 to ASCII and is commonly encountered in world wide web work.
60 In IBM character code set identification terminology ISO 8859-1 is
61 also known as CCSID 819 (or sometimes 0819 or even 00819).
65 The Extended Binary Coded Decimal Interchange Code refers to a
66 large collection of single- and multi-byte coded character sets that are
67 different from ASCII or ISO 8859-1 and are all slightly different from each
68 other; they typically run on host computers. The EBCDIC encodings derive from
69 8-bit byte extensions of Hollerith punched card encodings. The layout on the
70 cards was such that high bits were set for the upper and lower case alphabet
71 characters [a-z] and [A-Z], but there were gaps within each Latin alphabet
74 Some IBM EBCDIC character sets may be known by character code set
75 identification numbers (CCSID numbers) or code page numbers.
77 Perl can be compiled on platforms that run any of three commonly used EBCDIC
78 character sets, listed below.
80 =head3 The 13 variant characters
82 Among IBM EBCDIC character code sets there are 13 characters that
83 are often mapped to different integer values. Those characters
84 are known as the 13 "variant" characters and are:
86 \ [ ] { } ^ ~ ! # | $ @ `
88 When Perl is compiled for a platform, it looks at some of these characters to
89 guess which EBCDIC character set the platform uses, and adapts itself
90 accordingly to that platform. If the platform uses a character set that is not
91 one of the three Perl knows about, Perl will either fail to compile, or
92 mistakenly and silently choose one of the three.
99 Character code set ID 0037 is a mapping of the ASCII plus Latin-1
100 characters (i.e. ISO 8859-1) to an EBCDIC set. 0037 is used
101 in North American English locales on the OS/400 operating system
102 that runs on AS/400 computers. CCSID 0037 differs from ISO 8859-1
103 in 237 places, in other words they agree on only 19 code point values.
107 Character code set ID 1047 is also a mapping of the ASCII plus
108 Latin-1 characters (i.e. ISO 8859-1) to an EBCDIC set. 1047 is
109 used under Unix System Services for OS/390 or z/OS, and OpenEdition
110 for VM/ESA. CCSID 1047 differs from CCSID 0037 in eight places.
114 The EBCDIC code page in use on Siemens' BS2000 system is distinct from
115 1047 and 0037. It is identified below as the POSIX-BC set.
119 =head2 Unicode code points versus EBCDIC code points
121 In Unicode terminology a I<code point> is the number assigned to a
122 character: for example, in EBCDIC the character "A" is usually assigned
123 the number 193. In Unicode the character "A" is assigned the number 65.
124 This causes a problem with the semantics of the pack/unpack "U", which
125 are supposed to pack Unicode code points to characters and back to numbers.
126 The problem is: which code points to use for code points less than 256?
127 (for 256 and over there's no problem: Unicode code points are used)
128 In EBCDIC, for the low 256 the EBCDIC code points are used. This
129 means that the equivalences
131 pack("U", ord($character)) eq $character
132 unpack("U", $character) == ord $character
134 will hold. (If Unicode code points were applied consistently over
135 all the possible code points, pack("U",ord("A")) would in EBCDIC
136 equal I<A with acute> or chr(101), and unpack("U", "A") would equal
137 65, or I<non-breaking space>, not 193, or ord "A".)
139 =head2 Remaining Perl Unicode problems in EBCDIC
145 Many of the remaining problems seem to be related to case-insensitive matching
149 The extensions Unicode::Collate and Unicode::Normalized are not
150 supported under EBCDIC, likewise for the encoding pragma.
154 =head2 Unicode and UTF
156 UTF stands for C<Unicode Transformation Format>.
157 UTF-8 is an encoding of Unicode into a sequence of 8-bit byte chunks, based on
159 The length of a sequence required to represent a Unicode code point
160 depends on the ordinal number of that code point,
161 with larger numbers requiring more bytes.
162 UTF-EBCDIC is like UTF-8, but based on EBCDIC.
164 You may see the term C<invariant> character or code point.
165 This simply means that the character has the same numeric
166 value when encoded as when not.
167 (Note that this is a very different concept from L</The 13 variant characters>
169 For example, the ordinal value of 'A' is 193 in most EBCDIC code pages,
170 and also is 193 when encoded in UTF-EBCDIC.
171 All variant code points occupy at least two bytes when encoded.
172 In UTF-8, the code points corresponding to the lowest 128
173 ordinal numbers (0 - 127: the ASCII characters) are invariant.
174 In UTF-EBCDIC, there are 160 invariant characters.
175 (If you care, the EBCDIC invariants are those characters
176 which have ASCII equivalents, plus those that correspond to
177 the C1 controls (80..9f on ASCII platforms).)
179 A string encoded in UTF-EBCDIC may be longer (but never shorter) than
180 one encoded in UTF-8.
184 Starting from Perl 5.8 you can use the standard new module Encode
185 to translate from EBCDIC to Latin-1 code points.
186 Encode knows about more EBCDIC character sets than Perl can currently
187 be compiled to run on.
189 use Encode 'from_to';
191 my %ebcdic = ( 176 => 'cp37', 95 => 'cp1047', 106 => 'posix-bc' );
193 # $a is in EBCDIC code points
194 from_to($a, $ebcdic{ord '^'}, 'latin1');
195 # $a is ISO 8859-1 code points
197 and from Latin-1 code points to EBCDIC code points
199 use Encode 'from_to';
201 my %ebcdic = ( 176 => 'cp37', 95 => 'cp1047', 106 => 'posix-bc' );
203 # $a is ISO 8859-1 code points
204 from_to($a, 'latin1', $ebcdic{ord '^'});
205 # $a is in EBCDIC code points
207 For doing I/O it is suggested that you use the autotranslating features
208 of PerlIO, see L<perluniintro>.
210 Since version 5.8 Perl uses the new PerlIO I/O library. This enables
211 you to use different encodings per IO channel. For example you may use
214 open($f, ">:encoding(ascii)", "test.ascii");
215 print $f "Hello World!\n";
216 open($f, ">:encoding(cp37)", "test.ebcdic");
217 print $f "Hello World!\n";
218 open($f, ">:encoding(latin1)", "test.latin1");
219 print $f "Hello World!\n";
220 open($f, ">:encoding(utf8)", "test.utf8");
221 print $f "Hello World!\n";
223 to get four files containing "Hello World!\n" in ASCII, CP 0037 EBCDIC,
224 ISO 8859-1 (Latin-1) (in this example identical to ASCII since only ASCII
225 characters were printed), and
226 UTF-EBCDIC (in this example identical to normal EBCDIC since only characters
227 that don't differ between EBCDIC and UTF-EBCDIC were printed). See the
228 documentation of Encode::PerlIO for details.
230 As the PerlIO layer uses raw IO (bytes) internally, all this totally
231 ignores things like the type of your filesystem (ASCII or EBCDIC).
233 =head1 SINGLE OCTET TABLES
235 The following tables list the ASCII and Latin 1 ordered sets including
236 the subsets: C0 controls (0..31), ASCII graphics (32..7e), delete (7f),
237 C1 controls (80..9f), and Latin-1 (a.k.a. ISO 8859-1) (a0..ff). In the
238 table names of the Latin 1
239 extensions to ASCII have been labelled with character names roughly
240 corresponding to I<The Unicode Standard, Version 6.1> albeit with
241 substitutions such as s/LATIN// and s/VULGAR// in all cases, s/CAPITAL
242 LETTER// in some cases, and s/SMALL LETTER ([A-Z])/\l$1/ in some other
243 cases. Controls are listed using their Unicode 6.2 abbreviations.
244 The differences between the 0037 and 1047 sets are
245 flagged with **. The differences between the 1047 and POSIX-BC sets
246 are flagged with ##. All ord() numbers listed are decimal. If you
247 would rather see this table listing octal values, then run the table
248 (that is, the pod source text of this document, since this recipe may not
249 work with a pod2_other_format translation) through:
257 perl -ne 'if(/(.{29})(\d+)\s+(\d+)\s+(\d+)\s+(\d+)/)' \
258 -e '{printf("%s%-5.03o%-5.03o%-5.03o%.03o\n",$1,$2,$3,$4,$5)}' \
261 If you want to retain the UTF-x code points then in script form you
270 open(FH,"<perlebcdic.pod") or die "Could not open perlebcdic.pod: $!";
272 if (/(.{29})(\d+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)\.?(\d*)\s+(\d+)\.?(\d*)/)
274 if ($7 ne '' && $9 ne '') {
276 "%s%-5.03o%-5.03o%-5.03o%-5.03o%-3o.%-5o%-3o.%.03o\n",
277 $1,$2,$3,$4,$5,$6,$7,$8,$9);
280 printf("%s%-5.03o%-5.03o%-5.03o%-5.03o%-3o.%-5o%.03o\n",
281 $1,$2,$3,$4,$5,$6,$7,$8);
284 printf("%s%-5.03o%-5.03o%-5.03o%-5.03o%-5.03o%.03o\n",
285 $1,$2,$3,$4,$5,$6,$8);
290 If you would rather see this table listing hexadecimal values then
291 run the table through:
299 perl -ne 'if(/(.{29})(\d+)\s+(\d+)\s+(\d+)\s+(\d+)/)' \
300 -e '{printf("%s%-5.02X%-5.02X%-5.02X%.02X\n",$1,$2,$3,$4,$5)}' \
303 Or, in order to retain the UTF-x code points in hexadecimal:
311 open(FH,"<perlebcdic.pod") or die "Could not open perlebcdic.pod: $!";
313 if (/(.{29})(\d+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)\.?(\d*)\s+(\d+)\.?(\d*)/)
315 if ($7 ne '' && $9 ne '') {
317 "%s%-5.02X%-5.02X%-5.02X%-5.02X%-2X.%-6.02X%02X.%02X\n",
318 $1,$2,$3,$4,$5,$6,$7,$8,$9);
321 printf("%s%-5.02X%-5.02X%-5.02X%-5.02X%-2X.%-6.02X%02X\n",
322 $1,$2,$3,$4,$5,$6,$7,$8);
325 printf("%s%-5.02X%-5.02X%-5.02X%-5.02X%-5.02X%02X\n",
326 $1,$2,$3,$4,$5,$6,$8);
334 CCSID CCSID CCSID IX-
335 chr 0819 0037 1047 BC UTF-8 UTF-EBCDIC
336 ---------------------------------------------------------------------
341 <EOT> 4 55 55 55 4 55
342 <ENQ> 5 45 45 45 5 45
343 <ACK> 6 46 46 46 6 46
344 <BEL> 7 47 47 47 7 47
347 <LF> 10 37 21 21 10 21 **
348 <VT> 11 11 11 11 11 11
349 <FF> 12 12 12 12 12 12
350 <CR> 13 13 13 13 13 13
351 <SO> 14 14 14 14 14 14
352 <SI> 15 15 15 15 15 15
353 <DLE> 16 16 16 16 16 16
354 <DC1> 17 17 17 17 17 17
355 <DC2> 18 18 18 18 18 18
356 <DC3> 19 19 19 19 19 19
357 <DC4> 20 60 60 60 20 60
358 <NAK> 21 61 61 61 21 61
359 <SYN> 22 50 50 50 22 50
360 <ETB> 23 38 38 38 23 38
361 <CAN> 24 24 24 24 24 24
362 <EOM> 25 25 25 25 25 25
363 <SUB> 26 63 63 63 26 63
364 <ESC> 27 39 39 39 27 39
365 <FS> 28 28 28 28 28 28
366 <GS> 29 29 29 29 29 29
367 <RS> 30 30 30 30 30 30
368 <US> 31 31 31 31 31 31
369 <SPACE> 32 64 64 64 32 64
371 " 34 127 127 127 34 127
372 # 35 123 123 123 35 123
374 % 37 108 108 108 37 108
376 ' 39 125 125 125 39 125
381 , 44 107 107 107 44 107
385 0 48 240 240 240 48 240
386 1 49 241 241 241 49 241
387 2 50 242 242 242 50 242
388 3 51 243 243 243 51 243
389 4 52 244 244 244 52 244
390 5 53 245 245 245 53 245
391 6 54 246 246 246 54 246
392 7 55 247 247 247 55 247
393 8 56 248 248 248 56 248
394 9 57 249 249 249 57 249
395 : 58 122 122 122 58 122
398 = 61 126 126 126 61 126
399 > 62 110 110 110 62 110
400 ? 63 111 111 111 63 111
401 @ 64 124 124 124 64 124
402 A 65 193 193 193 65 193
403 B 66 194 194 194 66 194
404 C 67 195 195 195 67 195
405 D 68 196 196 196 68 196
406 E 69 197 197 197 69 197
407 F 70 198 198 198 70 198
408 G 71 199 199 199 71 199
409 H 72 200 200 200 72 200
410 I 73 201 201 201 73 201
411 J 74 209 209 209 74 209
412 K 75 210 210 210 75 210
413 L 76 211 211 211 76 211
414 M 77 212 212 212 77 212
415 N 78 213 213 213 78 213
416 O 79 214 214 214 79 214
417 P 80 215 215 215 80 215
418 Q 81 216 216 216 81 216
419 R 82 217 217 217 82 217
420 S 83 226 226 226 83 226
421 T 84 227 227 227 84 227
422 U 85 228 228 228 85 228
423 V 86 229 229 229 86 229
424 W 87 230 230 230 87 230
425 X 88 231 231 231 88 231
426 Y 89 232 232 232 89 232
427 Z 90 233 233 233 90 233
428 [ 91 186 173 187 91 173 ** ##
429 \ 92 224 224 188 92 224 ##
430 ] 93 187 189 189 93 189 **
431 ^ 94 176 95 106 94 95 ** ##
432 _ 95 109 109 109 95 109
433 ` 96 121 121 74 96 121 ##
434 a 97 129 129 129 97 129
435 b 98 130 130 130 98 130
436 c 99 131 131 131 99 131
437 d 100 132 132 132 100 132
438 e 101 133 133 133 101 133
439 f 102 134 134 134 102 134
440 g 103 135 135 135 103 135
441 h 104 136 136 136 104 136
442 i 105 137 137 137 105 137
443 j 106 145 145 145 106 145
444 k 107 146 146 146 107 146
445 l 108 147 147 147 108 147
446 m 109 148 148 148 109 148
447 n 110 149 149 149 110 149
448 o 111 150 150 150 111 150
449 p 112 151 151 151 112 151
450 q 113 152 152 152 113 152
451 r 114 153 153 153 114 153
452 s 115 162 162 162 115 162
453 t 116 163 163 163 116 163
454 u 117 164 164 164 117 164
455 v 118 165 165 165 118 165
456 w 119 166 166 166 119 166
457 x 120 167 167 167 120 167
458 y 121 168 168 168 121 168
459 z 122 169 169 169 122 169
460 { 123 192 192 251 123 192 ##
461 | 124 79 79 79 124 79
462 } 125 208 208 253 125 208 ##
463 ~ 126 161 161 255 126 161 ##
464 <DEL> 127 7 7 7 127 7
465 <PAD> 128 32 32 32 194.128 32
466 <HOP> 129 33 33 33 194.129 33
467 <BPH> 130 34 34 34 194.130 34
468 <NBH> 131 35 35 35 194.131 35
469 <IND> 132 36 36 36 194.132 36
470 <NEL> 133 21 37 37 194.133 37 **
471 <SSA> 134 6 6 6 194.134 6
472 <ESA> 135 23 23 23 194.135 23
473 <HTS> 136 40 40 40 194.136 40
474 <HTJ> 137 41 41 41 194.137 41
475 <VTS> 138 42 42 42 194.138 42
476 <PLD> 139 43 43 43 194.139 43
477 <PLU> 140 44 44 44 194.140 44
478 <RI> 141 9 9 9 194.141 9
479 <SS2> 142 10 10 10 194.142 10
480 <SS3> 143 27 27 27 194.143 27
481 <DCS> 144 48 48 48 194.144 48
482 <PU1> 145 49 49 49 194.145 49
483 <PU2> 146 26 26 26 194.146 26
484 <STS> 147 51 51 51 194.147 51
485 <CCH> 148 52 52 52 194.148 52
486 <MW> 149 53 53 53 194.149 53
487 <SPA> 150 54 54 54 194.150 54
488 <EPA> 151 8 8 8 194.151 8
489 <SOS> 152 56 56 56 194.152 56
490 <SGC> 153 57 57 57 194.153 57
491 <SCI> 154 58 58 58 194.154 58
492 <CSI> 155 59 59 59 194.155 59
493 <ST> 156 4 4 4 194.156 4
494 <OSC> 157 20 20 20 194.157 20
495 <PM> 158 62 62 62 194.158 62
496 <APC> 159 255 255 95 194.159 255 ##
497 <NON-BREAKING SPACE> 160 65 65 65 194.160 128.65
498 <INVERTED "!" > 161 170 170 170 194.161 128.66
499 <CENT SIGN> 162 74 74 176 194.162 128.67 ##
500 <POUND SIGN> 163 177 177 177 194.163 128.68
501 <CURRENCY SIGN> 164 159 159 159 194.164 128.69
502 <YEN SIGN> 165 178 178 178 194.165 128.70
503 <BROKEN BAR> 166 106 106 208 194.166 128.71 ##
504 <SECTION SIGN> 167 181 181 181 194.167 128.72
505 <DIAERESIS> 168 189 187 121 194.168 128.73 ** ##
506 <COPYRIGHT SIGN> 169 180 180 180 194.169 128.74
507 <FEMININE ORDINAL> 170 154 154 154 194.170 128.81
508 <LEFT POINTING GUILLEMET> 171 138 138 138 194.171 128.82
509 <NOT SIGN> 172 95 176 186 194.172 128.83 ** ##
510 <SOFT HYPHEN> 173 202 202 202 194.173 128.84
511 <REGISTERED TRADE MARK> 174 175 175 175 194.174 128.85
512 <MACRON> 175 188 188 161 194.175 128.86 ##
513 <DEGREE SIGN> 176 144 144 144 194.176 128.87
514 <PLUS-OR-MINUS SIGN> 177 143 143 143 194.177 128.88
515 <SUPERSCRIPT TWO> 178 234 234 234 194.178 128.89
516 <SUPERSCRIPT THREE> 179 250 250 250 194.179 128.98
517 <ACUTE ACCENT> 180 190 190 190 194.180 128.99
518 <MICRO SIGN> 181 160 160 160 194.181 128.100
519 <PARAGRAPH SIGN> 182 182 182 182 194.182 128.101
520 <MIDDLE DOT> 183 179 179 179 194.183 128.102
521 <CEDILLA> 184 157 157 157 194.184 128.103
522 <SUPERSCRIPT ONE> 185 218 218 218 194.185 128.104
523 <MASC. ORDINAL INDICATOR> 186 155 155 155 194.186 128.105
524 <RIGHT POINTING GUILLEMET> 187 139 139 139 194.187 128.106
525 <FRACTION ONE QUARTER> 188 183 183 183 194.188 128.112
526 <FRACTION ONE HALF> 189 184 184 184 194.189 128.113
527 <FRACTION THREE QUARTERS> 190 185 185 185 194.190 128.114
528 <INVERTED QUESTION MARK> 191 171 171 171 194.191 128.115
529 <A WITH GRAVE> 192 100 100 100 195.128 138.65
530 <A WITH ACUTE> 193 101 101 101 195.129 138.66
531 <A WITH CIRCUMFLEX> 194 98 98 98 195.130 138.67
532 <A WITH TILDE> 195 102 102 102 195.131 138.68
533 <A WITH DIAERESIS> 196 99 99 99 195.132 138.69
534 <A WITH RING ABOVE> 197 103 103 103 195.133 138.70
535 <CAPITAL LIGATURE AE> 198 158 158 158 195.134 138.71
536 <C WITH CEDILLA> 199 104 104 104 195.135 138.72
537 <E WITH GRAVE> 200 116 116 116 195.136 138.73
538 <E WITH ACUTE> 201 113 113 113 195.137 138.74
539 <E WITH CIRCUMFLEX> 202 114 114 114 195.138 138.81
540 <E WITH DIAERESIS> 203 115 115 115 195.139 138.82
541 <I WITH GRAVE> 204 120 120 120 195.140 138.83
542 <I WITH ACUTE> 205 117 117 117 195.141 138.84
543 <I WITH CIRCUMFLEX> 206 118 118 118 195.142 138.85
544 <I WITH DIAERESIS> 207 119 119 119 195.143 138.86
545 <CAPITAL LETTER ETH> 208 172 172 172 195.144 138.87
546 <N WITH TILDE> 209 105 105 105 195.145 138.88
547 <O WITH GRAVE> 210 237 237 237 195.146 138.89
548 <O WITH ACUTE> 211 238 238 238 195.147 138.98
549 <O WITH CIRCUMFLEX> 212 235 235 235 195.148 138.99
550 <O WITH TILDE> 213 239 239 239 195.149 138.100
551 <O WITH DIAERESIS> 214 236 236 236 195.150 138.101
552 <MULTIPLICATION SIGN> 215 191 191 191 195.151 138.102
553 <O WITH STROKE> 216 128 128 128 195.152 138.103
554 <U WITH GRAVE> 217 253 253 224 195.153 138.104 ##
555 <U WITH ACUTE> 218 254 254 254 195.154 138.105
556 <U WITH CIRCUMFLEX> 219 251 251 221 195.155 138.106 ##
557 <U WITH DIAERESIS> 220 252 252 252 195.156 138.112
558 <Y WITH ACUTE> 221 173 186 173 195.157 138.113 ** ##
559 <CAPITAL LETTER THORN> 222 174 174 174 195.158 138.114
560 <SMALL LETTER SHARP S> 223 89 89 89 195.159 138.115
561 <a WITH GRAVE> 224 68 68 68 195.160 139.65
562 <a WITH ACUTE> 225 69 69 69 195.161 139.66
563 <a WITH CIRCUMFLEX> 226 66 66 66 195.162 139.67
564 <a WITH TILDE> 227 70 70 70 195.163 139.68
565 <a WITH DIAERESIS> 228 67 67 67 195.164 139.69
566 <a WITH RING ABOVE> 229 71 71 71 195.165 139.70
567 <SMALL LIGATURE ae> 230 156 156 156 195.166 139.71
568 <c WITH CEDILLA> 231 72 72 72 195.167 139.72
569 <e WITH GRAVE> 232 84 84 84 195.168 139.73
570 <e WITH ACUTE> 233 81 81 81 195.169 139.74
571 <e WITH CIRCUMFLEX> 234 82 82 82 195.170 139.81
572 <e WITH DIAERESIS> 235 83 83 83 195.171 139.82
573 <i WITH GRAVE> 236 88 88 88 195.172 139.83
574 <i WITH ACUTE> 237 85 85 85 195.173 139.84
575 <i WITH CIRCUMFLEX> 238 86 86 86 195.174 139.85
576 <i WITH DIAERESIS> 239 87 87 87 195.175 139.86
577 <SMALL LETTER eth> 240 140 140 140 195.176 139.87
578 <n WITH TILDE> 241 73 73 73 195.177 139.88
579 <o WITH GRAVE> 242 205 205 205 195.178 139.89
580 <o WITH ACUTE> 243 206 206 206 195.179 139.98
581 <o WITH CIRCUMFLEX> 244 203 203 203 195.180 139.99
582 <o WITH TILDE> 245 207 207 207 195.181 139.100
583 <o WITH DIAERESIS> 246 204 204 204 195.182 139.101
584 <DIVISION SIGN> 247 225 225 225 195.183 139.102
585 <o WITH STROKE> 248 112 112 112 195.184 139.103
586 <u WITH GRAVE> 249 221 221 192 195.185 139.104 ##
587 <u WITH ACUTE> 250 222 222 222 195.186 139.105
588 <u WITH CIRCUMFLEX> 251 219 219 219 195.187 139.106
589 <u WITH DIAERESIS> 252 220 220 220 195.188 139.112
590 <y WITH ACUTE> 253 141 141 141 195.189 139.113
591 <SMALL LETTER thorn> 254 142 142 142 195.190 139.114
592 <y WITH DIAERESIS> 255 223 223 223 195.191 139.115
594 If you would rather see the above table in CCSID 0037 order rather than
595 ASCII + Latin-1 order then run the table through:
604 -ne 'if(/.{29}\d{1,3}\s{2,4}\d{1,3}\s{2,4}\d{1,3}\s{2,4}\d{1,3}/)'\
606 -e 'END{print map{$_->[0]}' \
607 -e ' sort{$a->[1] <=> $b->[1]}' \
608 -e ' map{[$_,substr($_,34,3)]}@l;}' perlebcdic.pod
610 If you would rather see it in CCSID 1047 order then change the number
611 34 in the last line to 39, like this:
620 -ne 'if(/.{29}\d{1,3}\s{2,4}\d{1,3}\s{2,4}\d{1,3}\s{2,4}\d{1,3}/)'\
622 -e 'END{print map{$_->[0]}' \
623 -e ' sort{$a->[1] <=> $b->[1]}' \
624 -e ' map{[$_,substr($_,39,3)]}@l;}' perlebcdic.pod
626 If you would rather see it in POSIX-BC order then change the number
627 39 in the last line to 44, like this:
636 -ne 'if(/.{29}\d{1,3}\s{2,4}\d{1,3}\s{2,4}\d{1,3}\s{2,4}\d{1,3}/)'\
638 -e 'END{print map{$_->[0]}' \
639 -e ' sort{$a->[1] <=> $b->[1]}' \
640 -e ' map{[$_,substr($_,44,3)]}@l;}' perlebcdic.pod
643 =head1 IDENTIFYING CHARACTER CODE SETS
645 To determine the character set you are running under from perl one
646 could use the return value of ord() or chr() to test one or more
647 character values. For example:
649 $is_ascii = "A" eq chr(65);
650 $is_ebcdic = "A" eq chr(193);
652 Also, "\t" is a C<HORIZONTAL TABULATION> character so that:
654 $is_ascii = ord("\t") == 9;
655 $is_ebcdic = ord("\t") == 5;
657 To distinguish EBCDIC code pages try looking at one or more of
658 the characters that differ between them. For example:
660 $is_ebcdic_37 = "\n" eq chr(37);
661 $is_ebcdic_1047 = "\n" eq chr(21);
663 Or better still choose a character that is uniquely encoded in any
664 of the code sets, e.g.:
666 $is_ascii = ord('[') == 91;
667 $is_ebcdic_37 = ord('[') == 186;
668 $is_ebcdic_1047 = ord('[') == 173;
669 $is_ebcdic_POSIX_BC = ord('[') == 187;
671 However, it would be unwise to write tests such as:
673 $is_ascii = "\r" ne chr(13); # WRONG
674 $is_ascii = "\n" ne chr(10); # ILL ADVISED
676 Obviously the first of these will fail to distinguish most ASCII platforms
677 from either a CCSID 0037, a 1047, or a POSIX-BC EBCDIC platform since "\r" eq
678 chr(13) under all of those coded character sets. But note too that
679 because "\n" is chr(13) and "\r" is chr(10) on the Macintosh (which is an
680 ASCII platform) the second C<$is_ascii> test will lead to trouble there.
682 To determine whether or not perl was built under an EBCDIC
683 code page you can use the Config module like so:
686 $is_ebcdic = $Config{'ebcdic'} eq 'define';
690 =head2 C<utf8::unicode_to_native()> and C<utf8::native_to_unicode()>
692 These functions take an input numeric code point in one encoding and
693 return what its equivalent value is in the other.
697 In order to convert a string of characters from one character set to
698 another a simple list of numbers, such as in the right columns in the
699 above table, along with perl's tr/// operator is all that is needed.
700 The data in the table are in ASCII/Latin1 order, hence the EBCDIC columns
701 provide easy-to-use ASCII/Latin1 to EBCDIC operations that are also easily
704 For example, to convert ASCII/Latin1 to code page 037 take the output of the
705 second numbers column from the output of recipe 2 (modified to add '\'
706 characters), and use it in tr/// like so:
709 '\x00\x01\x02\x03\x37\x2D\x2E\x2F\x16\x05\x25\x0B\x0C\x0D\x0E\x0F' .
710 '\x10\x11\x12\x13\x3C\x3D\x32\x26\x18\x19\x3F\x27\x1C\x1D\x1E\x1F' .
711 '\x40\x5A\x7F\x7B\x5B\x6C\x50\x7D\x4D\x5D\x5C\x4E\x6B\x60\x4B\x61' .
712 '\xF0\xF1\xF2\xF3\xF4\xF5\xF6\xF7\xF8\xF9\x7A\x5E\x4C\x7E\x6E\x6F' .
713 '\x7C\xC1\xC2\xC3\xC4\xC5\xC6\xC7\xC8\xC9\xD1\xD2\xD3\xD4\xD5\xD6' .
714 '\xD7\xD8\xD9\xE2\xE3\xE4\xE5\xE6\xE7\xE8\xE9\xBA\xE0\xBB\xB0\x6D' .
715 '\x79\x81\x82\x83\x84\x85\x86\x87\x88\x89\x91\x92\x93\x94\x95\x96' .
716 '\x97\x98\x99\xA2\xA3\xA4\xA5\xA6\xA7\xA8\xA9\xC0\x4F\xD0\xA1\x07' .
717 '\x20\x21\x22\x23\x24\x15\x06\x17\x28\x29\x2A\x2B\x2C\x09\x0A\x1B' .
718 '\x30\x31\x1A\x33\x34\x35\x36\x08\x38\x39\x3A\x3B\x04\x14\x3E\xFF' .
719 '\x41\xAA\x4A\xB1\x9F\xB2\x6A\xB5\xBD\xB4\x9A\x8A\x5F\xCA\xAF\xBC' .
720 '\x90\x8F\xEA\xFA\xBE\xA0\xB6\xB3\x9D\xDA\x9B\x8B\xB7\xB8\xB9\xAB' .
721 '\x64\x65\x62\x66\x63\x67\x9E\x68\x74\x71\x72\x73\x78\x75\x76\x77' .
722 '\xAC\x69\xED\xEE\xEB\xEF\xEC\xBF\x80\xFD\xFE\xFB\xFC\xAD\xAE\x59' .
723 '\x44\x45\x42\x46\x43\x47\x9C\x48\x54\x51\x52\x53\x58\x55\x56\x57' .
724 '\x8C\x49\xCD\xCE\xCB\xCF\xCC\xE1\x70\xDD\xDE\xDB\xDC\x8D\x8E\xDF';
726 my $ebcdic_string = $ascii_string;
727 eval '$ebcdic_string =~ tr/\000-\377/' . $cp_037 . '/';
729 To convert from EBCDIC 037 to ASCII just reverse the order of the tr///
732 my $ascii_string = $ebcdic_string;
733 eval '$ascii_string =~ tr/' . $cp_037 . '/\000-\377/';
735 Similarly one could take the output of the third numbers column from recipe 2
736 to obtain a C<$cp_1047> table. The fourth numbers column of the output from
737 recipe 2 could provide a C<$cp_posix_bc> table suitable for transcoding as
740 If you wanted to see the inverse tables, you would first have to sort on the
741 desired numbers column as in recipes 4, 5 or 6, then take the output of the
742 first numbers column.
746 XPG operability often implies the presence of an I<iconv> utility
747 available from the shell or from the C library. Consult your system's
748 documentation for information on iconv.
750 On OS/390 or z/OS see the iconv(1) manpage. One way to invoke the iconv
751 shell utility from within perl would be to:
753 # OS/390 or z/OS example
754 $ascii_data = `echo '$ebcdic_data'| iconv -f IBM-1047 -t ISO8859-1`
758 # OS/390 or z/OS example
759 $ebcdic_data = `echo '$ascii_data'| iconv -f ISO8859-1 -t IBM-1047`
761 For other perl-based conversion options see the Convert::* modules on CPAN.
765 The OS/390 and z/OS C run-time libraries provide _atoe() and _etoa() functions.
767 =head1 OPERATOR DIFFERENCES
769 The C<..> range operator treats certain character ranges with
770 care on EBCDIC platforms. For example the following array
771 will have twenty six elements on either an EBCDIC platform
772 or an ASCII platform:
774 @alphabet = ('A'..'Z'); # $#alphabet == 25
776 The bitwise operators such as & ^ | may return different results
777 when operating on string or character data in a perl program running
778 on an EBCDIC platform than when run on an ASCII platform. Here is
779 an example adapted from the one in L<perlop>:
781 # EBCDIC-based examples
782 print "j p \n" ^ " a h"; # prints "JAPH\n"
783 print "JA" | " ph\n"; # prints "japh\n"
784 print "JAPH\nJunk" & "\277\277\277\277\277"; # prints "japh\n";
785 print 'p N$' ^ " E<H\n"; # prints "Perl\n";
787 An interesting property of the 32 C0 control characters
788 in the ASCII table is that they can "literally" be constructed
789 as control characters in perl, e.g. C<(chr(0)> eq C<\c@>)>
790 C<(chr(1)> eq C<\cA>)>, and so on. Perl on EBCDIC platforms has been
791 ported to take C<\c@> to chr(0) and C<\cA> to chr(1), etc. as well, but the
792 thirty three characters that result depend on which code page you are
793 using. The table below uses the standard acronyms for the controls.
794 The POSIX-BC and 1047 sets are
795 identical throughout this range and differ from the 0037 set at only
796 one spot (21 decimal). Note that the C<LINE FEED> character
797 may be generated by C<\cJ> on ASCII platforms but by C<\cU> on 1047 or POSIX-BC
798 platforms and cannot be generated as a C<"\c.letter."> control character on
799 0037 platforms. Note also that C<\c\> cannot be the final element in a string
800 or regex, as it will absorb the terminator. But C<\c\I<X>> is a C<FILE
801 SEPARATOR> concatenated with I<X> for all I<X>.
803 chr ord 8859-1 0037 1047 && POSIX-BC
804 -----------------------------------------------------------------------
806 \c@ 0 <NUL> <NUL> <NUL>
807 \cA 1 <SOH> <SOH> <SOH>
808 \cB 2 <STX> <STX> <STX>
809 \cC 3 <ETX> <ETX> <ETX>
810 \cD 4 <EOT> <ST> <ST>
811 \cE 5 <ENQ> <HT> <HT>
812 \cF 6 <ACK> <SSA> <SSA>
813 \cG 7 <BEL> <DEL> <DEL>
814 \cH 8 <BS> <EPA> <EPA>
816 \cJ 10 <LF> <SS2> <SS2>
817 \cK 11 <VT> <VT> <VT>
818 \cL 12 <FF> <FF> <FF>
819 \cM 13 <CR> <CR> <CR>
820 \cN 14 <SO> <SO> <SO>
821 \cO 15 <SI> <SI> <SI>
822 \cP 16 <DLE> <DLE> <DLE>
823 \cQ 17 <DC1> <DC1> <DC1>
824 \cR 18 <DC2> <DC2> <DC2>
825 \cS 19 <DC3> <DC3> <DC3>
826 \cT 20 <DC4> <OSC> <OSC>
827 \cU 21 <NAK> <NEL> <LF> **
828 \cV 22 <SYN> <BS> <BS>
829 \cW 23 <ETB> <ESA> <ESA>
830 \cX 24 <CAN> <CAN> <CAN>
831 \cY 25 <EOM> <EOM> <EOM>
832 \cZ 26 <SUB> <PU2> <PU2>
833 \c[ 27 <ESC> <SS3> <SS3>
834 \c\X 28 <FS>X <FS>X <FS>X
835 \c] 29 <GS> <GS> <GS>
836 \c^ 30 <RS> <RS> <RS>
837 \c_ 31 <US> <US> <US>
839 =head1 FUNCTION DIFFERENCES
845 chr() must be given an EBCDIC code number argument to yield a desired
846 character return value on an EBCDIC platform. For example:
848 $CAPITAL_LETTER_A = chr(193);
852 ord() will return EBCDIC code number values on an EBCDIC platform.
855 $the_number_193 = ord("A");
859 The c and C templates for pack() are dependent upon character set
860 encoding. Examples of usage on EBCDIC include:
862 $foo = pack("CCCC",193,194,195,196);
864 $foo = pack("C4",193,194,195,196);
867 $foo = pack("ccxxcc",193,194,195,196);
872 One must be careful with scalars and strings that are passed to
873 print that contain ASCII encodings. One common place
874 for this to occur is in the output of the MIME type header for
875 CGI script writing. For example, many perl programming guides
876 recommend something similar to:
878 print "Content-type:\ttext/html\015\012\015\012";
879 # this may be wrong on EBCDIC
881 Under the IBM OS/390 USS Web Server or WebSphere on z/OS for example
882 you should instead write that as:
884 print "Content-type:\ttext/html\r\n\r\n"; # OK for DGW et al
886 That is because the translation from EBCDIC to ASCII is done
887 by the web server in this case (such code will not be appropriate for
888 the Macintosh however). Consult your web server's documentation for
893 The formats that can convert characters to numbers and vice versa
894 will be different from their ASCII counterparts when executed
895 on an EBCDIC platform. Examples include:
897 printf("%c%c%c",193,194,195); # prints ABC
901 EBCDIC sort results may differ from ASCII sort results especially for
902 mixed case strings. This is discussed in more detail below.
906 See the discussion of printf() above. An example of the use
909 $CAPITAL_LETTER_A = sprintf("%c",193);
913 See the discussion of pack() above.
917 =head1 REGULAR EXPRESSION DIFFERENCES
919 As of perl 5.005_03 the letter range regular expressions such as
920 [A-Z] and [a-z] have been especially coded to not pick up gap
921 characters. For example, characters such as E<ocirc> C<o WITH CIRCUMFLEX>
922 that lie between I and J would not be matched by the
923 regular expression range C</[H-K]/>. This works in
924 the other direction, too, if either of the range end points is
925 explicitly numeric: C<[\x89-\x91]> will match C<\x8e>, even
926 though C<\x89> is C<i> and C<\x91 > is C<j>, and C<\x8e>
927 is a gap character from the alphabetic viewpoint.
929 If you do want to match the alphabet gap characters in a single octet
930 regular expression try matching the hex or octal code such
931 as C</\313/> on EBCDIC or C</\364/> on ASCII platforms to
932 have your regular expression match C<o WITH CIRCUMFLEX>.
934 Another construct to be wary of is the inappropriate use of hex or
935 octal constants in regular expressions. Consider the following
939 my $char = substr(shift,0,1);
940 $char =~ /[\000-\037]/;
944 my $char = substr(shift,0,1);
945 $char =~ /[\040-\176]/;
949 my $char = substr(shift,0,1);
954 my $char = substr(shift,0,1);
955 $char =~ /[\200-\237]/;
958 sub is_latin_1 { # But not ASCII; not C1
959 my $char = substr(shift,0,1);
960 $char =~ /[\240-\377]/;
963 These are valid only on ASCII platforms, but can be easily rewritten to
964 work on any platform as follows:
967 my $char = substr(shift,0,1);
968 return $char =~ /[[:cntrl:]]/
969 && $char =~ /[[:ascii:]]/
970 && ! Is_delete($char);
974 my $char = substr(shift,0,1);
976 return $char =~ /[[:print:]]/ && $char =~ /[[:ascii:]]/;
980 # =~ /[ !"\#\$%&'()*+,\-.\/0-9:;<=>?\@A-Z[\\\]^_`a-z{|}~]/;
984 my $char = substr(shift,0,1);
985 return utf8::native_to_unicode(ord $char) == 0x7F;
989 use feature 'unicode_strings';
990 my $char = substr(shift,0,1);
991 return $char =~ /[[:cntrl:]]/ && $char !~ /[[:ascii:]]/;
994 sub Is_latin_1 { # But not ASCII; not C1
995 use feature 'unicode_strings';
996 my $char = substr(shift,0,1);
997 return ord($char) < 256
998 && $char !~ [[:ascii:]]
999 && $char !~ [[:cntrl:]];
1002 Another way to write C<Is_latin_1()> would be
1003 to use the characters in the range explicitly:
1006 my $char = substr(shift,0,1);
1007 $char =~ /[ ¡¢£¤¥¦§¨©ª«¬®¯°±²³´µ¶·¸¹º»¼½¾¿ÀÁÂÃÄÅÆÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖ×ØÙÚÛÜÝÞßàáâãäåæçèéêëìíîïðñòóôõö÷øùúûüýþÿ]/;
1010 Although that form may run into trouble in network transit (due to the
1011 presence of 8 bit characters) or on non ISO-Latin character sets.
1015 Most socket programming assumes ASCII character encodings in network
1016 byte order. Exceptions can include CGI script writing under a
1017 host web server where the server may take care of translation for you.
1018 Most host web servers convert EBCDIC data to ISO-8859-1 or Unicode on
1023 One big difference between ASCII-based character sets and EBCDIC ones
1024 are the relative positions of upper and lower case letters and the
1025 letters compared to the digits. If sorted on an ASCII-based platform the
1026 two-letter abbreviation for a physician comes before the two letter
1027 abbreviation for drive; that is:
1029 @sorted = sort(qw(Dr. dr.)); # @sorted holds ('Dr.','dr.') on ASCII,
1030 # but ('dr.','Dr.') on EBCDIC
1032 The property of lowercase before uppercase letters in EBCDIC is
1033 even carried to the Latin 1 EBCDIC pages such as 0037 and 1047.
1034 An example would be that E<Euml> C<E WITH DIAERESIS> (203) comes
1035 before E<euml> C<e WITH DIAERESIS> (235) on an ASCII platform, but
1036 the latter (83) comes before the former (115) on an EBCDIC platform.
1037 (Astute readers will note that the uppercase version of E<szlig>
1038 C<SMALL LETTER SHARP S> is simply "SS" and that the upper case version of
1039 E<yuml> C<y WITH DIAERESIS> is not in the 0..255 range but it is
1040 at U+x0178 in Unicode, or C<"\x{178}"> in a Unicode enabled Perl).
1042 The sort order will cause differences between results obtained on
1043 ASCII platforms versus EBCDIC platforms. What follows are some suggestions
1044 on how to deal with these differences.
1046 =head2 Ignore ASCII vs. EBCDIC sort differences.
1048 This is the least computationally expensive strategy. It may require
1049 some user education.
1051 =head2 MONO CASE then sort data.
1053 In order to minimize the expense of mono casing mixed-case text, try to
1054 C<tr///> towards the character set case most employed within the data.
1055 If the data are primarily UPPERCASE non Latin 1 then apply tr/[a-z]/[A-Z]/
1056 then sort(). If the data are primarily lowercase non Latin 1 then
1057 apply tr/[A-Z]/[a-z]/ before sorting. If the data are primarily UPPERCASE
1058 and include Latin-1 characters then apply:
1061 tr/[àáâãäåæçèéêëìíîïðñòóôõöøùúûüýþ]/[ÀÁÂÃÄÅÆÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝÞ/;
1064 then sort(). Do note however that such Latin-1 manipulation does not
1065 address the E<yuml> C<y WITH DIAERESIS> character that will remain at
1066 code point 255 on ASCII platforms, but 223 on most EBCDIC platforms
1067 where it will sort to a place less than the EBCDIC numerals. With a
1068 Unicode-enabled Perl you might try:
1072 The strategy of mono casing data before sorting does not preserve the case
1073 of the data and may not be acceptable for that reason.
1075 =head2 Convert, sort data, then re convert.
1077 This is the most expensive proposition that does not employ a network
1080 =head2 Perform sorting on one type of platform only.
1082 This strategy can employ a network connection. As such
1083 it would be computationally expensive.
1085 =head1 TRANSFORMATION FORMATS
1087 There are a variety of ways of transforming data with an intra character set
1088 mapping that serve a variety of purposes. Sorting was discussed in the
1089 previous section and a few of the other more popular mapping techniques are
1092 =head2 URL decoding and encoding
1094 Note that some URLs have hexadecimal ASCII code points in them in an
1095 attempt to overcome character or protocol limitation issues. For example
1096 the tilde character is not on every keyboard hence a URL of the form:
1098 http://www.pvhp.com/~pvhp/
1100 may also be expressed as either of:
1102 http://www.pvhp.com/%7Epvhp/
1104 http://www.pvhp.com/%7epvhp/
1106 where 7E is the hexadecimal ASCII code point for '~'. Here is an example
1107 of decoding such a URL under CCSID 1047:
1109 $url = 'http://www.pvhp.com/%7Epvhp/';
1110 # this array assumes code page 1047
1112 0, 1, 2, 3, 55, 45, 46, 47, 22, 5, 21, 11, 12, 13, 14, 15,
1113 16, 17, 18, 19, 60, 61, 50, 38, 24, 25, 63, 39, 28, 29, 30, 31,
1114 64, 90,127,123, 91,108, 80,125, 77, 93, 92, 78,107, 96, 75, 97,
1115 240,241,242,243,244,245,246,247,248,249,122, 94, 76,126,110,111,
1116 124,193,194,195,196,197,198,199,200,201,209,210,211,212,213,214,
1117 215,216,217,226,227,228,229,230,231,232,233,173,224,189, 95,109,
1118 121,129,130,131,132,133,134,135,136,137,145,146,147,148,149,150,
1119 151,152,153,162,163,164,165,166,167,168,169,192, 79,208,161, 7,
1120 32, 33, 34, 35, 36, 37, 6, 23, 40, 41, 42, 43, 44, 9, 10, 27,
1121 48, 49, 26, 51, 52, 53, 54, 8, 56, 57, 58, 59, 4, 20, 62,255,
1122 65,170, 74,177,159,178,106,181,187,180,154,138,176,202,175,188,
1123 144,143,234,250,190,160,182,179,157,218,155,139,183,184,185,171,
1124 100,101, 98,102, 99,103,158,104,116,113,114,115,120,117,118,119,
1125 172,105,237,238,235,239,236,191,128,253,254,251,252,186,174, 89,
1126 68, 69, 66, 70, 67, 71,156, 72, 84, 81, 82, 83, 88, 85, 86, 87,
1127 140, 73,205,206,203,207,204,225,112,221,222,219,220,141,142,223
1129 $url =~ s/%([0-9a-fA-F]{2})/pack("c",$a2e_1047[hex($1)])/ge;
1131 Conversely, here is a partial solution for the task of encoding such
1132 a URL under the 1047 code page:
1134 $url = 'http://www.pvhp.com/~pvhp/';
1135 # this array assumes code page 1047
1137 0, 1, 2, 3,156, 9,134,127,151,141,142, 11, 12, 13, 14, 15,
1138 16, 17, 18, 19,157, 10, 8,135, 24, 25,146,143, 28, 29, 30, 31,
1139 128,129,130,131,132,133, 23, 27,136,137,138,139,140, 5, 6, 7,
1140 144,145, 22,147,148,149,150, 4,152,153,154,155, 20, 21,158, 26,
1141 32,160,226,228,224,225,227,229,231,241,162, 46, 60, 40, 43,124,
1142 38,233,234,235,232,237,238,239,236,223, 33, 36, 42, 41, 59, 94,
1143 45, 47,194,196,192,193,195,197,199,209,166, 44, 37, 95, 62, 63,
1144 248,201,202,203,200,205,206,207,204, 96, 58, 35, 64, 39, 61, 34,
1145 216, 97, 98, 99,100,101,102,103,104,105,171,187,240,253,254,177,
1146 176,106,107,108,109,110,111,112,113,114,170,186,230,184,198,164,
1147 181,126,115,116,117,118,119,120,121,122,161,191,208, 91,222,174,
1148 172,163,165,183,169,167,182,188,189,190,221,168,175, 93,180,215,
1149 123, 65, 66, 67, 68, 69, 70, 71, 72, 73,173,244,246,242,243,245,
1150 125, 74, 75, 76, 77, 78, 79, 80, 81, 82,185,251,252,249,250,255,
1151 92,247, 83, 84, 85, 86, 87, 88, 89, 90,178,212,214,210,211,213,
1152 48, 49, 50, 51, 52, 53, 54, 55, 56, 57,179,219,220,217,218,159
1154 # The following regular expression does not address the
1155 # mappings for: ('.' => '%2E', '/' => '%2F', ':' => '%3A')
1156 $url =~ s/([\t "#%&\(\),;<=>\?\@\[\\\]^`{|}~])/
1157 sprintf("%%%02X",$e2a_1047[ord($1)])/xge;
1159 where a more complete solution would split the URL into components
1160 and apply a full s/// substitution only to the appropriate parts.
1162 In the remaining examples a @e2a or @a2e array may be employed
1163 but the assignment will not be shown explicitly. For code page 1047
1164 you could use the @a2e_1047 or @e2a_1047 arrays just shown.
1166 =head2 uu encoding and decoding
1168 The C<u> template to pack() or unpack() will render EBCDIC data in EBCDIC
1169 characters equivalent to their ASCII counterparts. For example, the
1170 following will print "Yes indeed\n" on either an ASCII or EBCDIC computer:
1172 $all_byte_chrs = '';
1173 for (0..255) { $all_byte_chrs .= chr($_); }
1174 $uuencode_byte_chrs = pack('u', $all_byte_chrs);
1175 ($uu = <<'ENDOFHEREDOC') =~ s/^\s*//gm;
1176 M``$"`P0%!@<("0H+#`T.#Q`1$A,4%187&!D:&QP='A\@(2(C)"4F)R@I*BLL
1177 M+2XO,#$R,S0U-C<X.3H[/#T^/T!!0D-$149'2$E*2TQ-3D]045)35%565UA9
1178 M6EM<75Y?8&%B8V1E9F=H:6IK;&UN;W!Q<G-T=79W>'EZ>WQ]?G^`@8*#A(6&
1179 MAXB)BHN,C8Z/D)&2DY25EI>8F9J;G)V>GZ"AHJ.DI::GJ*FJJZRMKJ^PL;*S
1180 MM+6VM[BYNKN\O;Z_P,'"P\3%QL?(R<K+S,W.S]#1TM/4U=;7V-G:V]S=WM_@
1181 ?X>+CY.7FY^CIZNOL[>[O\/'R\_3U]O?X^?K[_/W^_P``
1183 if ($uuencode_byte_chrs eq $uu) {
1186 $uudecode_byte_chrs = unpack('u', $uuencode_byte_chrs);
1187 if ($uudecode_byte_chrs eq $all_byte_chrs) {
1191 Here is a very spartan uudecoder that will work on EBCDIC provided
1192 that the @e2a array is filled in appropriately:
1194 #!/usr/local/bin/perl
1195 @e2a = ( # this must be filled in
1197 $_ = <> until ($mode,$file) = /^begin\s*(\d*)\s*(\S*)/;
1198 open(OUT, "> $file") if $file ne "";
1202 next unless int(((($e2a[ord()] - 32 ) & 077) + 2) / 3) ==
1204 print OUT unpack("u", $_);
1207 chmod oct($mode), $file;
1210 =head2 Quoted-Printable encoding and decoding
1212 On ASCII-encoded platforms it is possible to strip characters outside of
1213 the printable set using:
1215 # This QP encoder works on ASCII only
1216 $qp_string =~ s/([=\x00-\x1F\x80-\xFF])/sprintf("=%02X",ord($1))/ge;
1218 Whereas a QP encoder that works on both ASCII and EBCDIC platforms
1219 would look somewhat like the following (where the EBCDIC branch @e2a
1220 array is omitted for brevity):
1222 if (ord('A') == 65) { # ASCII
1223 $delete = "\x7F"; # ASCII
1224 @e2a = (0 .. 255) # ASCII to ASCII identity map
1227 $delete = "\x07"; # EBCDIC
1228 @e2a = # EBCDIC to ASCII map (as shown above)
1231 s/([^ !"\#\$%&'()*+,\-.\/0-9:;<>?\@A-Z[\\\]^_`a-z{|}~$delete])/
1232 sprintf("=%02X",$e2a[ord($1)])/xge;
1234 (although in production code the substitutions might be done
1235 in the EBCDIC branch with the @e2a array and separately in the
1236 ASCII branch without the expense of the identity map).
1238 Such QP strings can be decoded with:
1240 # This QP decoder is limited to ASCII only
1241 $string =~ s/=([0-9A-Fa-f][0-9A-Fa-f])/chr hex $1/ge;
1242 $string =~ s/=[\n\r]+$//;
1244 Whereas a QP decoder that works on both ASCII and EBCDIC platforms
1245 would look somewhat like the following (where the @a2e array is
1246 omitted for brevity):
1248 $string =~ s/=([0-9A-Fa-f][0-9A-Fa-f])/chr $a2e[hex $1]/ge;
1249 $string =~ s/=[\n\r]+$//;
1251 =head2 Caesarean ciphers
1253 The practice of shifting an alphabet one or more characters for encipherment
1254 dates back thousands of years and was explicitly detailed by Gaius Julius
1255 Caesar in his B<Gallic Wars> text. A single alphabet shift is sometimes
1256 referred to as a rotation and the shift amount is given as a number $n after
1257 the string 'rot' or "rot$n". Rot0 and rot26 would designate identity maps
1258 on the 26-letter English version of the Latin alphabet. Rot13 has the
1259 interesting property that alternate subsequent invocations are identity maps
1260 (thus rot13 is its own non-trivial inverse in the group of 26 alphabet
1261 rotations). Hence the following is a rot13 encoder and decoder that will
1262 work on ASCII and EBCDIC platforms:
1264 #!/usr/local/bin/perl
1267 tr/n-za-mN-ZA-M/a-zA-Z/;
1273 perl -ne 'tr/n-za-mN-ZA-M/a-zA-Z/;print'
1276 =head1 Hashing order and checksums
1278 To the extent that it is possible to write code that depends on
1279 hashing order there may be differences between hashes as stored
1280 on an ASCII-based platform and hashes stored on an EBCDIC-based platform.
1283 =head1 I18N AND L10N
1285 Internationalization (I18N) and localization (L10N) are supported at least
1286 in principle even on EBCDIC platforms. The details are system-dependent
1287 and discussed under the L<perlebcdic/OS ISSUES> section below.
1289 =head1 MULTI-OCTET CHARACTER SETS
1291 Perl may work with an internal UTF-EBCDIC encoding form for wide characters
1292 on EBCDIC platforms in a manner analogous to the way that it works with
1293 the UTF-8 internal encoding form on ASCII based platforms.
1295 Legacy multi byte EBCDIC code pages XXX.
1299 There may be a few system-dependent issues
1300 of concern to EBCDIC Perl programmers.
1308 The PASE environment is a runtime environment for OS/400 that can run
1309 executables built for PowerPC AIX in OS/400; see L<perlos400>. PASE
1310 is ASCII-based, not EBCDIC-based as the ILE.
1320 Perl runs under Unix Systems Services or USS.
1326 B<chcp> is supported as a shell utility for displaying and changing
1327 one's code page. See also L<chcp(1)>.
1329 =item dataset access
1331 For sequential data set access try:
1333 my @ds_records = `cat //DSNAME`;
1337 my @ds_records = `cat //'HLQ.DSNAME'`;
1339 See also the OS390::Stdio module on CPAN.
1341 =item OS/390, z/OS iconv
1343 B<iconv> is supported as both a shell utility and a C RTL routine.
1344 See also the iconv(1) and iconv(3) manual pages.
1348 On OS/390 or z/OS see L<locale> for information on locales. The L10N files
1349 are in F</usr/nls/locale>. $Config{d_setlocale} is 'define' on OS/390
1360 This pod document contains literal Latin 1 characters and may encounter
1361 translation difficulties. In particular one popular nroff implementation
1362 was known to strip accented characters to their unaccented counterparts
1363 while attempting to view this document through the B<pod2man> program
1364 (for example, you may see a plain C<y> rather than one with a diaeresis
1365 as in E<yuml>). Another nroff truncated the resultant manpage at
1366 the first occurrence of 8 bit characters.
1368 Not all shells will allow multiple C<-e> string arguments to perl to
1369 be concatenated together properly as recipes 0, 2, 4, 5, and 6 might
1374 L<perllocale>, L<perlfunc>, L<perlunicode>, L<utf8>.
1378 L<http://anubis.dkuug.dk/i18n/charmaps>
1380 L<http://www.unicode.org/>
1382 L<http://www.unicode.org/unicode/reports/tr16/>
1384 L<http://www.wps.com/projects/codes/>
1385 B<ASCII: American Standard Code for Information Infiltration> Tom Jennings,
1388 B<The Unicode Standard, Version 3.0> The Unicode Consortium, Lisa Moore ed.,
1389 ISBN 0-201-61633-5, Addison Wesley Developers Press, February 2000.
1391 B<CDRA: IBM - Character Data Representation Architecture -
1392 Reference and Registry>, IBM SC09-2190-00, December 1996.
1394 "Demystifying Character Sets", Andrea Vine, Multilingual Computing
1395 & Technology, B<#26 Vol. 10 Issue 4>, August/September 1999;
1396 ISSN 1523-0309; Multilingual Computing Inc. Sandpoint ID, USA.
1398 B<Codes, Ciphers, and Other Cryptic and Clandestine Communication>
1399 Fred B. Wrixon, ISBN 1-57912-040-7, Black Dog & Leventhal Publishers,
1402 L<http://www.bobbemer.com/P-BIT.HTM>
1403 B<IBM - EBCDIC and the P-bit; The biggest Computer Goof Ever> Robert Bemer.
1407 15 April 2001: added UTF-8 and UTF-EBCDIC to main table, pvhp.
1411 Peter Prymmer pvhp@best.com wrote this in 1999 and 2000
1412 with CCSID 0819 and 0037 help from Chris Leach and
1413 AndrE<eacute> Pirard A.Pirard@ulg.ac.be as well as POSIX-BC
1414 help from Thomas Dorner Thomas.Dorner@start.de.
1415 Thanks also to Vickie Cooper, Philip Newton, William Raffloer, and
1416 Joe Smith. Trademarks, registered trademarks, service marks and
1417 registered service marks used in this document are the property of
1418 their respective owners.