2 # Makefile to build perl on Windows using Microsoft NMAKE.
4 # Microsoft Visual C++ 6.0 or later
5 # Windows SDK 64-bit compiler and tools
7 # This is set up to build a perl.exe that runs off a shared library
8 # (perl515.dll). Also makes individual DLLs for the XS extensions.
12 ## Make sure you read README.win32 *before* you mess with anything here!
16 ## Build configuration. Edit the values below to suit your needs.
20 # Set these to wherever you want "nmake install" to put your
24 INST_TOP = $(INST_DRV)\perl
27 # Uncomment if you want to build a 32-bit Perl using a 32-bit compiler
28 # on a 64-bit version of Windows.
32 # Comment this out if you DON'T want your perl installation to be versioned.
33 # This means that the new installation will overwrite any files from the
34 # old installation at the same INST_TOP location. Leaving it enabled is
35 # the safest route, as perl adds the extra version directory to all the
36 # locations it installs files to. If you disable it, an alternative
37 # versioned installation can be obtained by setting INST_TOP above to a
38 # path that includes an arbitrary version string.
43 # Comment this out if you DON'T want your perl installation to have
44 # architecture specific components. This means that architecture-
45 # specific files will be installed along with the architecture-neutral
46 # files. Leaving it enabled is safer and more flexible, in case you
47 # want to build multiple flavors of perl and install them together in
48 # the same location. Commenting it out gives you a simpler
49 # installation that is easier to understand for beginners.
51 #INST_ARCH = \$(ARCHNAME)
54 # Uncomment this if you want perl to run
55 # $Config{sitelibexp}\sitecustomize.pl
56 # before anything else. This script can then be set up, for example,
57 # to add additional entries to @INC.
59 #USE_SITECUST = define
62 # uncomment to enable multiple interpreters. This is need for fork()
63 # emulation and for thread support.
68 # Beginnings of interpreter cloning/threads; now reasonably complete.
69 # This should be enabled to get the fork() emulation. This needs
75 # uncomment to enable the implicit "host" layer for all system calls
76 # made by perl. This needs USE_MULTI above. This is also needed to
82 # Comment out next assign to disable perl's I/O subsystem and use compiler's
83 # stdio for IO - depending on your compiler vendor and run time library you may
84 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
85 # You will also be unable to take full advantage of perl5.8's support for multiple
86 # encodings and may see lower IO performance. You have been warned.
90 # Comment this out if you don't want to enable large file support for
91 # some reason. Should normally only be changed to maintain compatibility
92 # with an older release of perl.
93 USE_LARGE_FILES = define
96 # uncomment exactly one of the following
98 # Visual C++ 6.x (aka Visual C++ 98)
100 # Visual C++ Toolkit 2003 (aka Visual C++ 7.x) (free command-line tools)
102 # Visual C++ .NET 2003 (aka Visual C++ 7.x) (full version)
104 # Windows Server 2003 SP1 Platform SDK (April 2005)
106 # Visual C++ 2005 Express Edition (aka Visual C++ 8.x) (free version)
108 # Visual C++ 2005 (aka Visual C++ 8.x) (full version)
110 # Visual C++ 2008 Express Edition (aka Visual C++ 9.x) (free version)
112 # Visual C++ 2008 (aka Visual C++ 9.x) (full version)
114 # Visual C++ 2010 Express Edition (aka Visual C++ 10.x) (free version)
115 #CCTYPE = MSVC100FREE
116 # Visual C++ 2010 (aka Visual C++ 10.x) (full version)
120 # uncomment next line if you want debug version of perl (big,slow)
121 # If not enabled, we automatically try to use maximum optimization
122 # with all compilers that are known to have a working optimizer.
127 # uncomment to enable linking with setargv.obj under the Visual C
128 # compiler. Setting this options enables perl to expand wildcards in
129 # arguments, but it may be harder to use alternate methods like
130 # File::DosGlob that are more powerful. This option is supported only with
133 #USE_SETARGV = define
136 # set this if you wish to use perl's malloc
137 # WARNING: Turning this on/off WILL break binary compatibility with extensions
138 # you may have compiled with/without it. Be prepared to recompile all
139 # extensions if you change the default. Currently, this cannot be enabled
140 # if you ask for USE_IMP_SYS above.
142 #PERL_MALLOC = define
145 # set this to enable debugging mstats
146 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
147 # be enabled without PERL_MALLOC as well.
149 #DEBUG_MSTATS = define
152 # set this to additionally provide a statically linked perl-static.exe.
153 # Note that dynamic loading will not work with this perl, so you must
154 # include required modules statically using the STATIC_EXT or ALL_STATIC
155 # variables below. A static library perl515s.lib will also be created.
156 # Ordinary perl.exe is not affected by this option.
158 #BUILD_STATIC = define
161 # in addition to BUILD_STATIC the option ALL_STATIC makes *every*
162 # extension get statically built
163 # This will result in a very large perl executable, but the main purpose
164 # is to have proper linking set so as to be able to create miscellaneous
165 # executables with different built-in extensions
171 # set the install locations of the compiler include/libraries
172 # Running VCVARS32.BAT is *required* when using Visual C.
173 # Some versions of Visual C don't define MSVCDIR in the environment,
174 # so you may have to set CCHOME explicitly (spaces in the path name should
178 CCINCDIR = $(CCHOME)\include
179 CCLIBDIR = $(CCHOME)\lib
182 # Additional compiler flags can be specified here.
184 BUILDOPT = $(BUILDOPTEXTRA)
187 # This should normally be disabled. Enabling it will disable the File::Glob
188 # implementation of CORE::glob.
190 #BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB
193 # Perl needs to read scripts in text mode so that the DATA filehandle
194 # works correctly with seek() and tell(), or around auto-flushes of
195 # all filehandles (e.g. by system(), backticks, fork(), etc).
197 # The current version on the ByteLoader module on CPAN however only
198 # works if scripts are read in binary mode. But before you disable text
199 # mode script reading (and break some DATA filehandle functionality)
200 # please check first if an updated ByteLoader isn't available on CPAN.
202 BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
205 # specify semicolon-separated list of extra directories that modules will
206 # look for libraries (spaces in path names need not be quoted)
211 # set this to your email address (perl will guess a value from
212 # from your loginname and your hostname, which may not be right)
217 ## Build configuration ends.
220 ##################### CHANGE THESE ONLY IF YOU MUST #####################
222 !IF "$(USE_IMP_SYS)" == "define"
227 !IF "$(PERL_MALLOC)" == ""
232 !IF "$(DEBUG_MSTATS)" == ""
236 !IF "$(DEBUG_MSTATS)" == "define"
237 BUILDOPT = $(BUILDOPT) -DPERL_DEBUGGING_MSTATS
240 !IF "$(USE_SITECUST)" == ""
244 !IF "$(USE_MULTI)" == ""
248 !IF "$(USE_ITHREADS)" == ""
252 !IF "$(USE_IMP_SYS)" == ""
256 !IF "$(USE_PERLIO)" == ""
260 !IF "$(USE_LARGE_FILES)" == ""
261 USE_LARGE_FILES = undef
264 !IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
268 !IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
272 !IF "$(USE_SITECUST)" == "define"
273 BUILDOPT = $(BUILDOPT) -DUSE_SITECUSTOMIZE
276 !IF "$(USE_MULTI)" != "undef"
277 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
280 !IF "$(USE_IMP_SYS)" != "undef"
281 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS
284 !IF "$(PROCESSOR_ARCHITECTURE)" == ""
285 PROCESSOR_ARCHITECTURE = x86
289 # When we are running from a 32bit cmd.exe on AMD64 then
290 # PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432
292 !IF "$(PROCESSOR_ARCHITEW6432)" != ""
293 PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432)
296 !IF "$(PROCESSOR_ARCHITECTURE)" == "AMD64" || "$(PROCESSOR_ARCHITECTURE)" == "IA64"
304 # Treat 64-bit MSVC60 (doesn't really exist) as SDK2003SP1 because
305 # both link against MSVCRT.dll (which is part of Windows itself) and
306 # not against a compiler specific versioned runtime.
307 !IF "$(WIN64)" == "define" && "$(CCTYPE)" == "MSVC60"
311 ARCHITECTURE = $(PROCESSOR_ARCHITECTURE)
312 !IF "$(ARCHITECTURE)" == "AMD64"
315 !IF "$(ARCHITECTURE)" == "IA64"
319 !IF "$(USE_MULTI)" == "define"
320 ARCHNAME = MSWin32-$(ARCHITECTURE)-multi
322 !IF "$(USE_PERLIO)" == "define"
323 ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio
325 ARCHNAME = MSWin32-$(ARCHITECTURE)
329 !IF "$(USE_PERLIO)" == "define"
330 BUILDOPT = $(BUILDOPT) -DUSE_PERLIO
333 !IF "$(USE_ITHREADS)" == "define"
334 ARCHNAME = $(ARCHNAME)-thread
337 # Visual C++ 98, .NET 2003, 2005/2008/2010 specific.
338 # VC++ 6/7/8/9/10.x can load DLLs on demand. Makes the test suite run
339 # in about 10% less time. (The free version of 7.x can't do this, but the free
340 # versions of 8/9/10.x can.)
341 !IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70" || \
342 "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
343 "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE" || \
344 "$(CCTYPE)" == "MSVC100" || "$(CCTYPE)" == "MSVC100FREE"
345 DELAYLOAD = -DELAYLOAD:ws2_32.dll delayimp.lib
348 # Visual C++ 2005 and 2008 (VC++ 8.x and 9.x) create manifest files for EXEs and
349 # DLLs. These either need copying everywhere with the binaries, or else need
350 # embedding in them otherwise MSVCR80.dll or MSVCR90.dll won't be found. For
351 # simplicity, embed them if they exist (and delete them afterwards so that they
352 # don't get installed too).
353 EMBED_EXE_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1 && \
354 if exist $@.manifest del $@.manifest
355 EMBED_DLL_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2 && \
356 if exist $@.manifest del $@.manifest
358 ARCHDIR = ..\lib\$(ARCHNAME)
359 COREDIR = ..\lib\CORE
360 AUTODIR = ..\lib\auto
366 EXTUTILSDIR = $(LIBDIR)\ExtUtils
370 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
371 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
372 INST_LIB = $(INST_TOP)$(INST_VER)\lib
373 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
374 INST_COREDIR = $(INST_ARCHLIB)\CORE
375 INST_HTML = $(INST_TOP)$(INST_VER)\html
378 # Programs to compile, build .lib files and link
383 LIB32 = $(LINK32) -lib
390 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
391 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
392 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT
393 LOCDEFS = -DPERLDLL -DPERL_CORE
399 !IF "$(CFG)" == "Debug"
400 OPTIMIZE = -Od -MD -Zi -DDEBUGGING
403 OPTIMIZE = -MD -Zi -DNDEBUG
404 # we enable debug symbols in release builds also
405 LINK_DBG = -debug -opt:ref,icf
406 # you may want to enable this if you want COFF symbols in the executables
407 # in addition to the PDB symbols. The default Dr. Watson that ships with
408 # Windows can use the the former but not latter. The free WinDbg can be
409 # installed to get better stack traces from just the PDB symbols, so we
410 # avoid the bloat of COFF symbols by default.
411 #LINK_DBG = $(LINK_DBG) -debugtype:both
412 ! IF "$(WIN64)" == "define"
413 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
414 OPTIMIZE = $(OPTIMIZE) -Ox -GL
415 LINK_DBG = $(LINK_DBG) -ltcg
417 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
418 OPTIMIZE = $(OPTIMIZE) -O1
419 #OPTIMIZE = $(OPTIMIZE) -O2
423 !IF "$(WIN64)" == "define"
424 DEFINES = $(DEFINES) -DWIN64 -DCONSERVATIVE
425 OPTIMIZE = $(OPTIMIZE) -fp:precise
428 # For now, silence VC++ 8/9/10.x's warnings about "unsafe" CRT functions
429 # and POSIX CRT function names being deprecated.
430 !IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
431 "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE" || \
432 "$(CCTYPE)" == "MSVC100" || "$(CCTYPE)" == "MSVC100FREE"
433 DEFINES = $(DEFINES) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE
436 # In VS 2005 (VC++ 8.0) Microsoft changes time_t from 32-bit to
437 # 64-bit, even in 32-bit mode. It also provides the _USE_32BIT_TIME_T
438 # preprocessor option to revert back to the old functionality for
439 # backward compatibility. We define this symbol here for older 32-bit
440 # compilers only (which aren't using it at all) for the sole purpose
441 # of getting it into $Config{ccflags}. That way if someone builds
442 # Perl itself with e.g. VC6 but later installs an XS module using VC8
443 # the time_t types will still be compatible.
444 !IF "$(WIN64)" == "undef"
445 ! IF "$(CCTYPE)" == "MSVC60" || \
446 "$(CCTYPE)" == "MSVC70" || "$(CCTYPE)" == "MSVC70FREE"
447 BUILDOPT = $(BUILDOPT) -D_USE_32BIT_TIME_T
452 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
453 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
454 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
455 version.lib odbc32.lib odbccp32.lib comctl32.lib
457 # The 64 bit Windows Server 2003 SP1 SDK compilers link against MSVCRT.dll, which
458 # doesn't include the buffer overrun verification code used by the /GS switch.
459 # Since the code links against libraries that are compiled with /GS, this
460 # "security cookie verification" code must be included via bufferoverflow.lib.
461 !IF "$(WIN64)" == "define" && "$(CCTYPE)" == "SDK2003SP1"
462 LIBBASEFILES = $(LIBBASEFILES) bufferoverflowU.lib
465 LIBFILES = $(LIBBASEFILES) $(LIBC)
467 #EXTRACFLAGS = -nologo -GF -W4 -wd4127 -wd4706
468 EXTRACFLAGS = -nologo -GF -W3
469 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
470 $(PCHFLAGS) $(OPTIMIZE)
471 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
472 -libpath:"$(INST_COREDIR)" \
473 -machine:$(PROCESSOR_ARCHITECTURE)
478 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
480 !IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
481 "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE" || \
482 "$(CCTYPE)" == "MSVC100" || "$(CCTYPE)" == "MSVC100FREE"
483 LINK_FLAGS = $(LINK_FLAGS) "/manifestdependency:type='Win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' processorArchitecture='*' publicKeyToken='6595b64144ccf1df' language='*'"
485 RSC_FLAGS = -DINCLUDE_MANIFEST
489 #################### do not edit below this line #######################
490 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
498 .SUFFIXES : .c $(o) .dll .lib .exe .rc .res
501 $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
507 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
508 -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
512 $(RSC) -i.. $(RSC_FLAGS) $<
517 # makedef.pl must be updated if this changes, and this should normally
518 # only change when there is an incompatible revision of the public API.
519 PERLIMPLIB = ..\perl515.lib
520 PERLSTATICLIB = ..\perl515s.lib
521 PERLDLL = ..\perl515.dll
523 MINIPERL = ..\miniperl.exe
525 PERLEXE = ..\perl.exe
526 WPERLEXE = ..\wperl.exe
527 PERLEXESTATIC = ..\perl-static.exe
528 GLOBEXE = ..\perlglob.exe
529 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
530 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
532 GENUUDMAP = ..\generate_uudmap.exe
533 !IF "$(BUILD_STATIC)" == "define"
539 # Unicode data files generated by mktables
540 FIRSTUNIFILE = ..\lib\unicore\Decomposition.pl
541 UNIDATAFILES = ..\lib\unicore\Decomposition.pl \
542 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
543 ..\lib\unicore\Heavy.pl ..\lib\unicore\mktables.lst \
544 ..\lib\unicore\TestProp.pl
546 # Directories of Unicode data files generated by mktables
547 UNIDATADIR1 = ..\lib\unicore\To
548 UNIDATADIR2 = ..\lib\unicore\lib
550 PERLEXE_MANIFEST= .\perlexe.manifest
551 PERLEXE_ICO = .\perlexe.ico
552 PERLEXE_RES = .\perlexe.res
555 # Nominate a target which causes extensions to be re-built
556 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
557 # on and really only the interface - i.e. the .def file used to export symbols
559 PERLDEP = perldll.def
561 PL2BAT = bin\pl2bat.pl
562 GLOBBAT = bin\perlglob.bat
577 ..\utils\config_data \
585 ..\utils\cpanp-run-perl \
603 !IF "$(WIN64)" == "define"
604 CFGSH_TMPL = config.vc64
605 CFGH_TMPL = config_H.vc64
607 CFGSH_TMPL = config.vc
608 CFGH_TMPL = config_H.vc
611 XCOPY = xcopy /f /r /i /d /y
612 RCOPY = xcopy /f /r /i /e /d /y
656 EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c
658 !IF "$(PERL_MALLOC)" == "define"
659 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c
662 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c
670 # We need this for miniperl build unless we override canned
671 # config.h #define building mini\*
672 #!IF "$(USE_PERLIO)" == "define"
673 WIN32_SRC = $(WIN32_SRC) .\win32io.c
721 .\include\sys\socket.h \
724 CORE_H = $(CORE_NOCFG_H) .\config.h ..\git_version.h
726 UUDMAP_H = ..\uudmap.h
727 BITCOUNT_H = ..\bitcount.h
728 MG_DATA_H = ..\mg_data.h
730 MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)
731 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
732 WIN32_OBJ = $(WIN32_SRC:.c=.obj)
733 MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \
734 $(MINIDIR)\miniperlmain$(o) \
735 $(MINIDIR)\perlio$(o)
736 MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\)
737 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
738 DLL_OBJ = $(DYNALOADER)
739 X2P_OBJ = $(X2P_SRC:.c=.obj)
740 GENUUDMAP_OBJ = $(GENUUDMAP:.exe=.obj)
742 PERLDLL_OBJ = $(CORE_OBJ)
743 PERLEXE_OBJ = perlmain$(o)
744 PERLEXEST_OBJ = perlmainst$(o)
746 PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
748 !IF "$(USE_SETARGV)" != ""
749 SETARGV_OBJ = setargv$(o)
752 !IF "$(ALL_STATIC)" == "define"
753 # some exclusions, unfortunately, until fixed:
754 # - Win32 extension contains overlapped symbols with win32.c (BUG!)
755 # - MakeMaker isn't capable enough for SDBM_File (smaller bug)
756 # - Encode (encoding search algorithm relies on shared library?)
757 STATIC_EXT = * !Win32 !SDBM_File !Encode
759 # specify static extensions here, for example:
760 #STATIC_EXT = Cwd Compress/Raw/Zlib
761 STATIC_EXT = Win32CORE
764 DYNALOADER = ..\DynaLoader$(o)
767 "INST_DRV=$(INST_DRV)" \
768 "INST_TOP=$(INST_TOP)" \
769 "INST_VER=$(INST_VER)" \
770 "INST_ARCH=$(INST_ARCH)" \
771 "archname=$(ARCHNAME)" \
774 "ccflags=$(EXTRACFLAGS) $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \
775 "cf_email=$(EMAIL)" \
776 "d_mymalloc=$(PERL_MALLOC)" \
778 "incpath=$(CCINCDIR:"=\")" \
779 "libperl=$(PERLIMPLIB:..\=)" \
780 "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
782 "make=$(MAKE_BARE)" \
783 "static_ext=$(STATIC_EXT)" \
784 "usethreads=$(USE_ITHREADS)" \
785 "useithreads=$(USE_ITHREADS)" \
786 "usemultiplicity=$(USE_MULTI)" \
787 "useperlio=$(USE_PERLIO)" \
788 "uselargefiles=$(USE_LARGE_FILES)" \
789 "usesitecustomize=$(USE_SITECUST)" \
790 "LINK_FLAGS=$(LINK_FLAGS:"=\")" \
791 "optimize=$(OPTIMIZE:"=\")"
793 ICWD = -I..\dist\Cwd -I..\dist\Cwd\lib
799 all : .\config.h ..\git_version.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) \
800 $(UNIDATAFILES) MakePPPort $(PERLEXE) $(X2P) Extensions_nonxs Extensions $(PERLSTATIC)
801 @echo Everything is up to date. '$(MAKE_BARE) test' to run test suite.
803 regnodes : ..\regnodes.h
805 ..\regcomp$(o) : ..\regnodes.h ..\regcharclass.h
807 ..\regexec$(o) : ..\regnodes.h ..\regcharclass.h
809 reonly : regnodes .\config.h ..\git_version.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) \
810 $(UNIDATAFILES) $(PERLEXE) $(X2P) Extensions_reonly
811 @echo Perl and 're' are up to date.
813 static: $(PERLEXESTATIC)
815 #------------------------------------------------------------
817 $(GLOBEXE) : perlglob$(o)
818 $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
819 perlglob$(o) setargv$(o)
822 perlglob$(o) : perlglob.c
824 config.w32 : $(CFGSH_TMPL)
825 copy $(CFGSH_TMPL) config.w32
827 .\config.h : $(CFGH_TMPL)
829 copy $(CFGH_TMPL) config.h
831 ..\git_version.h : $(MINIPERL) ..\make_patchnum.pl
833 miniperl -Ilib make_patchnum.pl
836 # make sure that we recompile perl.c if the git version changes
837 ..\perl$(o) : ..\git_version.h
839 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
840 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
842 # this target is for when changes to the main config.sh happen.
843 # edit config.vc, then make perl in a minimal configuration (i.e. with MULTI,
844 # ITHREADS, IMP_SYS, LARGE_FILES, PERLIO and CRYPT off), then make this target
845 # to regenerate config_H.vc.
846 # repeat for config.vc64 and config_H.vc64 if you have a suitable build
847 # environment, otherwise hand-edit them to maintain the same differences with
848 # config.vc and config_H.vc as before.
849 # unfortunately, some further manual editing is also then required to restore all
850 # the special __GNUC__ handling that is otherwise lost.
852 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
853 $(MINIPERL) -I..\lib ..\configpm --chdir=..
855 -$(MINIPERL) -I..\lib $(ICWD) config_h.PL "INST_VER=$(INST_VER)"
856 rename config.h $(CFGH_TMPL)
858 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
859 $(MINIPERL) -I..\lib ..\configpm --chdir=..
860 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
861 $(XCOPY) ..\*.h $(COREDIR)\*.*
862 $(XCOPY) *.h $(COREDIR)\*.*
863 $(RCOPY) include $(COREDIR)\*.*
864 -$(MINIPERL) -I..\lib $(ICWD) config_h.PL "INST_VER=$(INST_VER)"
865 if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
867 ..\lib\buildcustomize.pl: $(MINIPERL) ..\write_buildcustomize.pl
868 $(MINIPERL) -I..\lib ..\write_buildcustomize.pl .. >..\lib\buildcustomize.pl
870 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
871 $(LINK32) -subsystem:console -out:$@ @<<
872 $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
877 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
879 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
880 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ ..\$(*F).c
882 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
883 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
885 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
886 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
887 !IF "$(USE_IMP_SYS)" == "define"
888 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
889 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
892 # 1. we don't want to rebuild miniperl.exe when config.h changes
893 # 2. we don't want to rebuild miniperl.exe with non-default config.h
894 # 3. we can't have miniperl.exe depend on git_version.h, as miniperl creates it
895 $(MINI_OBJ) : $(CORE_NOCFG_H)
897 $(WIN32_OBJ) : $(CORE_H)
898 $(CORE_OBJ) : $(CORE_H)
899 $(DLL_OBJ) : $(CORE_H)
900 $(X2P_OBJ) : $(CORE_H)
902 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\makedef.pl create_perllibst_h.pl
903 $(MINIPERL) -I..\lib create_perllibst_h.pl
904 $(MINIPERL) -I..\lib -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
905 CCTYPE=$(CCTYPE) > perldll.def
907 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
908 $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @Extensions_static @<<
909 $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
912 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
914 $(PERLSTATICLIB): Extensions_static
915 $(LIB32) $(LIB_FLAGS) -out:$@ @Extensions_static @<<
918 $(XCOPY) $(PERLSTATICLIB) $(COREDIR)
920 $(PERLEXE_RES): perlexe.rc $(PERLEXE_MANIFEST) $(PERLEXE_ICO)
922 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
924 miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
927 ..\x2p\a2p$(o) : ..\x2p\a2p.c
928 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
930 ..\x2p\hash$(o) : ..\x2p\hash.c
931 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
933 ..\x2p\str$(o) : ..\x2p\str.c
934 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
936 ..\x2p\util$(o) : ..\x2p\util.c
937 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
939 ..\x2p\walk$(o) : ..\x2p\walk.c
940 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
942 $(X2P) : $(MINIPERL) $(X2P_OBJ) Extensions
943 $(MINIPERL) -I..\lib ..\x2p\find2perl.PL
944 $(MINIPERL) -I..\lib ..\x2p\s2p.PL
945 $(LINK32) -subsystem:console -out:$@ @<<
946 $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
950 $(MINIDIR)\globals$(o) : $(UUDMAP_H) $(BITCOUNT_H) $(MG_DATA_H)
952 $(UUDMAP_H) $(MG_DATA_H) : $(BITCOUNT_H)
954 $(BITCOUNT_H) : $(GENUUDMAP)
955 $(GENUUDMAP) $(UUDMAP_H) $(BITCOUNT_H) $(MG_DATA_H)
957 $(GENUUDMAP_OBJ) : ..\mg_raw.h
959 $(GENUUDMAP) : $(GENUUDMAP_OBJ)
960 $(LINK32) -subsystem:console -out:$@ @<<
961 $(LINK_FLAGS) $(LIBFILES) $(GENUUDMAP_OBJ)
965 perlmain.c : runperl.c
966 copy runperl.c perlmain.c
968 perlmain$(o) : perlmain.c
969 $(CC) $(CFLAGS_O:-DPERLDLL=-UPERLDLL) $(OBJOUT_FLAG)$@ -c perlmain.c
971 perlmainst.c : runperl.c
972 copy runperl.c perlmainst.c
974 perlmainst$(o) : perlmainst.c
975 $(CC) $(CFLAGS_O) $(OBJOUT_FLAG)$@ -c perlmainst.c
977 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
978 $(LINK32) -subsystem:console -out:$@ $(LINK_FLAGS) \
979 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
981 copy $(PERLEXE) $(WPERLEXE)
982 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
984 $(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES)
985 $(LINK32) -subsystem:console -out:$@ $(LINK_FLAGS) \
986 @Extensions_static $(PERLSTATICLIB) /PDB:NONE \
987 $(LIBFILES) $(PERLEXEST_OBJ) $(SETARGV_OBJ) $(PERLEXE_RES)
990 MakePPPort: $(MINIPERL) $(CONFIGPM) Extensions_nonxs
991 $(MINIPERL) -I..\lib $(ICWD) ..\mkppport
993 #-------------------------------------------------------------------------------
994 # There's no direct way to mark a dependency on
995 # DynaLoader.pm, so this will have to do
996 Extensions: ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
997 $(XCOPY) ..\*.h $(COREDIR)\*.*
998 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic
1000 Extensions_reonly: ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
1001 $(XCOPY) ..\*.h $(COREDIR)\*.*
1002 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic +re
1004 Extensions_static : ..\make_ext.pl ..\lib\buildcustomize.pl list_static_libs.pl $(PERLDEP) $(CONFIGPM)
1005 $(XCOPY) ..\*.h $(COREDIR)\*.*
1006 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --static
1007 $(MINIPERL) -I..\lib list_static_libs.pl > Extensions_static
1009 Extensions_nonxs: ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM)
1010 $(XCOPY) ..\*.h $(COREDIR)\*.*
1011 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --nonxs
1013 $(DYNALOADER) : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) Extensions_nonxs
1014 $(XCOPY) ..\*.h $(COREDIR)\*.*
1015 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --dynaloader
1018 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=clean
1020 Extensions_realclean:
1021 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=realclean
1023 #-------------------------------------------------------------------------------
1025 doc: $(PERLEXE) ..\pod\perltoc.pod
1026 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
1027 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
1028 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1030 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1031 # so please check that script before making structural changes here
1033 utils: $(PERLEXE) $(X2P)
1035 $(MAKE) PERL=$(MINIPERL)
1037 copy ..\README.aix ..\pod\perlaix.pod
1038 copy ..\README.amiga ..\pod\perlamiga.pod
1039 copy ..\README.beos ..\pod\perlbeos.pod
1040 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1041 copy ..\README.ce ..\pod\perlce.pod
1042 copy ..\README.cn ..\pod\perlcn.pod
1043 copy ..\README.cygwin ..\pod\perlcygwin.pod
1044 copy ..\README.dgux ..\pod\perldgux.pod
1045 copy ..\README.dos ..\pod\perldos.pod
1046 copy ..\README.epoc ..\pod\perlepoc.pod
1047 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1048 copy ..\README.haiku ..\pod\perlhaiku.pod
1049 copy ..\README.hpux ..\pod\perlhpux.pod
1050 copy ..\README.hurd ..\pod\perlhurd.pod
1051 copy ..\README.irix ..\pod\perlirix.pod
1052 copy ..\README.jp ..\pod\perljp.pod
1053 copy ..\README.ko ..\pod\perlko.pod
1054 copy ..\README.linux ..\pod\perllinux.pod
1055 copy ..\README.macos ..\pod\perlmacos.pod
1056 copy ..\README.macosx ..\pod\perlmacosx.pod
1057 copy ..\README.mpeix ..\pod\perlmpeix.pod
1058 copy ..\README.netware ..\pod\perlnetware.pod
1059 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1060 copy ..\README.os2 ..\pod\perlos2.pod
1061 copy ..\README.os390 ..\pod\perlos390.pod
1062 copy ..\README.os400 ..\pod\perlos400.pod
1063 copy ..\README.plan9 ..\pod\perlplan9.pod
1064 copy ..\README.qnx ..\pod\perlqnx.pod
1065 copy ..\README.riscos ..\pod\perlriscos.pod
1066 copy ..\README.solaris ..\pod\perlsolaris.pod
1067 copy ..\README.symbian ..\pod\perlsymbian.pod
1068 copy ..\README.tru64 ..\pod\perltru64.pod
1069 copy ..\README.tw ..\pod\perltw.pod
1070 copy ..\README.uts ..\pod\perluts.pod
1071 copy ..\README.vmesa ..\pod\perlvmesa.pod
1072 copy ..\README.vos ..\pod\perlvos.pod
1073 copy ..\README.win32 ..\pod\perlwin32.pod
1074 copy ..\pod\perldelta.pod ..\pod\perl5151delta.pod
1076 $(PERLEXE) $(PL2BAT) $(UTILS)
1077 $(PERLEXE) $(ICWD) ..\autodoc.pl ..
1078 $(PERLEXE) $(ICWD) ..\pod\perlmodlib.pl -q
1080 ..\pod\perltoc.pod: $(PERLEXE) Extensions Extensions_nonxs
1081 $(PERLEXE) -f ..\pod\buildtoc --build-toc -q
1083 # Note that the pod cleanup in this next section is parsed (and regenerated
1084 # by pod/buildtoc so please check that script before making changes here
1086 distclean: realclean
1087 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1088 $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD) \
1089 $(PERLEXESTATIC) $(PERLSTATICLIB)
1091 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1092 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1093 -del /f $(LIBDIR)\.exists $(LIBDIR)\attributes.pm $(LIBDIR)\DynaLoader.pm
1094 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1095 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1096 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1097 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1098 -del /f $(LIBDIR)\File\Glob.pm
1099 -del /f $(LIBDIR)\Storable.pm
1100 -del /f $(LIBDIR)\Sys\Hostname.pm
1101 -del /f $(LIBDIR)\Time\HiRes.pm
1102 -del /f $(LIBDIR)\Unicode\Normalize.pm
1103 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1104 -del /f $(LIBDIR)\Win32.pm
1105 -del /f $(LIBDIR)\Win32CORE.pm
1106 -del /f $(LIBDIR)\Win32API\File.pm
1107 -del /f $(LIBDIR)\Win32API\File\cFile.pc
1108 -del /f $(LIBDIR)\buildcustomize.pl
1109 -del /f $(DISTDIR)\XSLoader\XSLoader.pm
1110 -if exist $(LIBDIR)\App rmdir /s /q $(LIBDIR)\App
1111 -if exist $(LIBDIR)\Archive rmdir /s /q $(LIBDIR)\Archive
1112 -if exist $(LIBDIR)\Attribute rmdir /s /q $(LIBDIR)\Attribute
1113 -if exist $(LIBDIR)\autodie rmdir /s /q $(LIBDIR)\autodie
1114 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1115 -if exist $(LIBDIR)\CGI rmdir /s /q $(LIBDIR)\CGI
1116 -if exist $(LIBDIR)\CPAN rmdir /s /q $(LIBDIR)\CPAN
1117 -if exist $(LIBDIR)\CPANPLUS rmdir /s /q $(LIBDIR)\CPANPLUS
1118 -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
1119 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1120 -if exist $(LIBDIR)\Devel rmdir /s /q $(LIBDIR)\Devel
1121 -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest
1122 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1123 -if exist $(LIBDIR)\encoding rmdir /s /q $(LIBDIR)\encoding
1124 -if exist $(LIBDIR)\ExtUtils\CBuilder rmdir /s /q $(LIBDIR)\ExtUtils\CBuilder
1125 -if exist $(LIBDIR)\ExtUtils\Command rmdir /s /q $(LIBDIR)\ExtUtils\Command
1126 -if exist $(LIBDIR)\ExtUtils\Constant rmdir /s /q $(LIBDIR)\ExtUtils\Constant
1127 -if exist $(LIBDIR)\ExtUtils\Liblist rmdir /s /q $(LIBDIR)\ExtUtils\Liblist
1128 -if exist $(LIBDIR)\ExtUtils\MakeMaker rmdir /s /q $(LIBDIR)\ExtUtils\MakeMaker
1129 -if exist $(LIBDIR)\File\Spec rmdir /s /q $(LIBDIR)\File\Spec
1130 -if exist $(LIBDIR)\Filter rmdir /s /q $(LIBDIR)\Filter
1131 -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
1132 -if exist $(LIBDIR)\I18N\LangTags rmdir /s /q $(LIBDIR)\I18N\LangTags
1133 -if exist $(LIBDIR)\inc rmdir /s /q $(LIBDIR)\inc
1134 -if exist $(LIBDIR)\Module\Pluggable rmdir /s /q $(LIBDIR)\Module\Pluggable
1135 -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
1136 -if exist $(LIBDIR)\IPC rmdir /s /q $(LIBDIR)\IPC
1137 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1138 -if exist $(LIBDIR)\Locale rmdir /s /q $(LIBDIR)\Locale
1139 -if exist $(LIBDIR)\Log rmdir /s /q $(LIBDIR)\Log
1140 -if exist $(LIBDIR)\Math rmdir /s /q $(LIBDIR)\Math
1141 -if exist $(LIBDIR)\Memoize rmdir /s /q $(LIBDIR)\Memoize
1142 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1143 -if exist $(LIBDIR)\Module rmdir /s /q $(LIBDIR)\Module
1144 -if exist $(LIBDIR)\mro rmdir /s /q $(LIBDIR)\mro
1145 -if exist $(LIBDIR)\Net\FTP rmdir /s /q $(LIBDIR)\Net\FTP
1146 -if exist $(LIBDIR)\Object rmdir /s /q $(LIBDIR)\Object
1147 -if exist $(LIBDIR)\Package rmdir /s /q $(LIBDIR)\Package
1148 -if exist $(LIBDIR)\Params rmdir /s /q $(LIBDIR)\Params
1149 -if exist $(LIBDIR)\Parse rmdir /s /q $(LIBDIR)\Parse
1150 -if exist $(LIBDIR)\PerlIO rmdir /s /q $(LIBDIR)\PerlIO
1151 -if exist $(LIBDIR)\Pod\Perldoc rmdir /s /q $(LIBDIR)\Pod\Perldoc
1152 -if exist $(LIBDIR)\Pod\Simple rmdir /s /q $(LIBDIR)\Pod\Simple
1153 -if exist $(LIBDIR)\Pod\Text rmdir /s /q $(LIBDIR)\Pod\Text
1154 -if exist $(LIBDIR)\re rmdir /s /q $(LIBDIR)\re
1155 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1156 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1157 -if exist $(LIBDIR)\TAP rmdir /s /q $(LIBDIR)\TAP
1158 -if exist $(LIBDIR)\Term\UI rmdir /s /q $(LIBDIR)\Term\UI
1159 -if exist $(LIBDIR)\Test rmdir /s /q $(LIBDIR)\Test
1160 -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread
1161 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1162 -if exist $(LIBDIR)\Tie\Hash rmdir /s /q $(LIBDIR)\Tie\Hash
1163 -if exist $(LIBDIR)\Unicode\Collate rmdir /s /q $(LIBDIR)\Unicode\Collate
1164 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1165 -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
1166 -cd $(PODDIR) && del /f *.html *.bat \
1167 perl5151delta.pod perlaix.pod perlamiga.pod perlapi.pod \
1168 perlbeos.pod perlbs2000.pod perlce.pod perlcn.pod \
1169 perlcygwin.pod perldgux.pod perldos.pod perlepoc.pod \
1170 perlfreebsd.pod perlhaiku.pod perlhpux.pod perlhurd.pod \
1171 perlintern.pod perlirix.pod perljp.pod perlko.pod perllinux.pod \
1172 perlmacos.pod perlmacosx.pod perlmodlib.pod perlmpeix.pod \
1173 perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \
1174 perlos400.pod perlplan9.pod perlqnx.pod perlriscos.pod \
1175 perlsolaris.pod perlsymbian.pod perltoc.pod perltru64.pod \
1176 perltw.pod perluniprops.pod perluts.pod perlvmesa.pod \
1177 perlvos.pod perlwin32.pod
1178 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1179 perldoc perlivp libnetcfg enc2xs piconv cpan *.bat \
1180 xsubpp instmodsh json_pp prove ptar ptardiff ptargrep cpanp-run-perl cpanp cpan2dist shasum corelist config_data
1181 -cd ..\x2p && del /f find2perl s2p psed *.bat
1182 -del /f ..\config.sh perlmain.c dlutils.c config.h.new \
1185 -del /f ..\lib\Config_git.pl
1188 -del /f $(PERLEXE_RES) perl.base
1189 -cd .. && del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib ppport.h
1190 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1191 -cd $(DISTDIR) && del /s *.def Makefile Makefile.old
1192 -cd $(CPANDIR) && del /s *.def Makefile Makefile.old
1193 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1194 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1195 -if exist pod2htmd.tmp del pod2htmd.tmp
1196 -if exist pod2htmi.tmp del pod2htmi.tmp
1197 -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
1198 -del /f ..\t\test_state
1200 install : all installbare installhtml
1202 installbare : utils ..\pod\perltoc.pod
1203 $(PERLEXE) ..\installperl
1204 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1205 if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\*.*
1206 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1207 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1208 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1209 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1212 $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*
1214 inst_lib : $(CONFIGPM)
1215 $(RCOPY) ..\lib $(INST_LIB)\*.*
1217 $(UNIDATAFILES) ..\pod\perluniprops.pod : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables Extensions_nonxs
1218 cd ..\lib\unicore && \
1219 ..\$(MINIPERL) -I.. -I..\..\dist\Cwd\lib -I..\..\dist\Cwd mktables -P ..\..\pod -maketest -makelist -p -check $@ $(FIRSTUNIFILE)
1221 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils $(UNIDATAFILES)
1222 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1223 if exist ..\t\perl.exe del /f ..\t\perl.exe
1224 rename ..\t\miniperl.exe perl.exe
1225 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1228 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1230 test-prep : all utils ../pod/perltoc.pod
1231 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1232 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1233 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1234 set PERL_STATIC_EXT=$(STATIC_EXT)
1238 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1241 test-reonly : reonly utils
1242 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1243 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1244 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1246 $(PERLEXE) -I..\lib harness $(OPT) -re \bre\\/ $(EXTRA)
1254 test-notty : test-prep
1255 set PERL_SKIP_TTY_TEST=1
1257 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1261 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1262 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1263 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1265 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1269 -@$(DEL) miniperlmain$(o)
1270 -@$(DEL) $(MINIPERL)
1271 -@$(DEL) perlglob$(o)
1272 -@$(DEL) perlmain$(o)
1273 -@$(DEL) perlmainst$(o)
1276 -@$(DEL) ..\git_version.h
1279 -@$(DEL) $(WPERLEXE)
1280 -@$(DEL) $(PERLEXESTATIC)
1281 -@$(DEL) $(PERLSTATICLIB)
1283 -@$(DEL) $(CORE_OBJ)
1284 -@$(DEL) $(GENUUDMAP) $(GENUUDMAP_OBJ) $(UUDMAP_H) $(BITCOUNT_H) $(MG_DATA_H)
1285 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1286 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1287 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1288 -@$(DEL) $(UNIDATAFILES)
1289 -@$(DEL) $(WIN32_OBJ)
1292 -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
1293 -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat
1294 -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat
1297 -@$(DEL) Extensions_static
1299 clean : Extensions_clean _clean
1301 realclean : Extensions_realclean _clean
1303 # Handy way to run perlbug -ok without having to install and run the
1304 # installed perlbug. We don't re-run the tests here - we trust the user.
1305 # Please *don't* use this unless all tests pass.
1306 # If you want to report test failures, use "nmake nok" instead.
1308 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1311 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1314 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1317 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok