2 # Makefile to build perl on Windows NT using DMAKE.
4 # Visual C++ 2.0 through 6.0 (and possibly newer versions)
6 # Mingw32 with gcc-2.95.2 or better **experimental**
7 # MS Platform SDK 64-bit compiler and tools **experimental**
9 # This is set up to build a perl.exe that runs off a shared library
10 # (perl59.dll). Also makes individual DLLs for the XS extensions.
14 ## Make sure you read README.win32 *before* you mess with anything here!
18 ## Build configuration. Edit the values below to suit your needs.
22 # Set these to wherever you want "dmake install" to put your
26 INST_TOP *= $(INST_DRV)\perl
29 # Comment this out if you DON'T want your perl installation to be versioned.
30 # This means that the new installation will overwrite any files from the
31 # old installation at the same INST_TOP location. Leaving it enabled is
32 # the safest route, as perl adds the extra version directory to all the
33 # locations it installs files to. If you disable it, an alternative
34 # versioned installation can be obtained by setting INST_TOP above to a
35 # path that includes an arbitrary version string.
40 # Comment this out if you DON'T want your perl installation to have
41 # architecture specific components. This means that architecture-
42 # specific files will be installed along with the architecture-neutral
43 # files. Leaving it enabled is safer and more flexible, in case you
44 # want to build multiple flavors of perl and install them together in
45 # the same location. Commenting it out gives you a simpler
46 # installation that is easier to understand for beginners.
48 #INST_ARCH *= \$(ARCHNAME)
51 # Uncomment this if you want perl to run
52 # $Config{sitelibexp}\sitecustomize.pl
53 # before anything else. This script can then be set up, for example,
54 # to add additional entries to @INC.
56 #USE_SITECUST *= define
59 # uncomment to enable multiple interpreters. This is need for fork()
60 # emulation and for thread support.
65 # Interpreter cloning/threads; now reasonably complete.
66 # This should be enabled to get the fork() emulation.
67 # This needs USE_MULTI above.
69 USE_ITHREADS *= define
72 # uncomment to enable the implicit "host" layer for all system calls
73 # made by perl. This needs USE_MULTI above.
74 # This is also needed to get fork().
79 # Comment out next assign to disable perl's I/O subsystem and use compiler's
80 # stdio for IO - depending on your compiler vendor and run time library you may
81 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
82 # You will also be unable to take full advantage of perl5.8's support for multiple
83 # encodings and may see lower IO performance. You have been warned.
87 # Comment this out if you don't want to enable large file support for
88 # some reason. Should normally only be changed to maintain compatibility
89 # with an older release of perl.
90 USE_LARGE_FILES *= define
93 # uncomment exactly one of the following
97 # Visual C++ > 2.x and < 6.x
101 # Borland 5.02 or later
103 # MinGW with gcc-2.95.2 or later
107 # uncomment this if your Borland compiler is older than v5.4.
110 # uncomment this if you want to use Borland's VCL as your CRT
114 # uncomment this if you are compiling under Windows 95/98 and command.com
115 # (not needed if you're running under 4DOS/NT 6.01 or later)
119 # uncomment next line if you want debug version of perl (big,slow)
120 # If not enabled, we automatically try to use maximum optimization
121 # with all compilers that are known to have a working optimizer.
126 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
127 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
128 # This currently requires VC 5.0 with Service Pack 3 or later.
129 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
130 # and follow the directions in the package to install.
132 # Not recommended if you have VC 6.x and you're not running Windows 9x.
134 #USE_PERLCRT *= define
137 # uncomment to enable linking with setargv.obj under the Visual C
138 # compiler. Setting this options enables perl to expand wildcards in
139 # arguments, but it may be harder to use alternate methods like
140 # File::DosGlob that are more powerful. This option is supported only with
143 #USE_SETARGV *= define
146 # if you want to have the crypt() builtin function implemented, leave this or
147 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
148 # version of des_fcrypt().
150 CRYPT_SRC *= fcrypt.c
153 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
154 # library, uncomment this, and make sure the library exists (see README.win32)
155 # Specify the full pathname of the library.
157 #CRYPT_LIB *= fcrypt.lib
160 # set this if you wish to use perl's malloc
161 # WARNING: Turning this on/off WILL break binary compatibility with extensions
162 # you may have compiled with/without it. Be prepared to recompile all
163 # extensions if you change the default. Currently, this cannot be enabled
164 # if you ask for USE_IMP_SYS above.
166 #PERL_MALLOC *= define
169 # set this to enable debugging mstats
170 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
171 # be enabled without PERL_MALLOC as well.
173 #DEBUG_MSTATS *= define
176 # set the install locations of the compiler include/libraries
177 # Running VCVARS32.BAT is *required* when using Visual C.
178 # Some versions of Visual C don't define MSVCDIR in the environment,
179 # so you may have to set CCHOME explicitly (spaces in the path name should
182 .IF "$(CCTYPE)" == "BORLAND"
183 CCHOME *= C:\Borland\BCC55
184 .ELIF "$(CCTYPE)" == "GCC"
189 CCINCDIR *= $(CCHOME)\include
190 CCLIBDIR *= $(CCHOME)\lib
193 # Additional compiler flags can be specified here.
195 BUILDOPT *= $(BUILDOPTEXTRA)
198 # Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
199 # internal hash function unless the PERL_HASH_SEED environment variable is set.
200 # Alternatively, adding -DNO_HASH_SEED will completely disable the
201 # randomization feature.
202 # The latter is required to maintain binary compatibility with Perl 5.8.0.
204 #BUILDOPT += -DPERL_HASH_SEED_EXPLICIT
205 #BUILDOPT += -DNO_HASH_SEED
208 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
209 # for old symbols by default, at the expense of extreme pollution. You most
210 # probably just want to build modules that won't compile with
211 # perl Makefile.PL POLLUTE=1
212 # instead of enabling this. Please report such modules to the respective
215 #BUILDOPT += -DPERL_POLLUTE
218 # This should normally be disabled. Enabling it will disable the File::Glob
219 # implementation of CORE::glob.
221 #BUILDOPT += -DPERL_EXTERNAL_GLOB
224 # This should normally be disabled. Enabling it causes perl to read scripts
225 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
227 #BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
230 # specify semicolon-separated list of extra directories that modules will
231 # look for libraries (spaces in path names need not be quoted)
236 # set this to point to cmd.exe (only needed if you use some
237 # alternate shell that doesn't grok cmd.exe style commands)
239 #SHELL *= g:\winnt\system32\cmd.exe
242 # set this to your email address (perl will guess a value from
243 # from your loginname and your hostname, which may not be right)
248 ## Build configuration ends.
251 ##################### CHANGE THESE ONLY IF YOU MUST #####################
253 .IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
257 CRYPT_FLAG = -DHAVE_DES_FCRYPT
261 DEBUG_MSTATS *= undef
263 USE_SITECUST *= undef
265 USE_ITHREADS *= undef
268 USE_LARGE_FILES *= undef
271 .IF "$(USE_IMP_SYS)" == "define"
275 .IF "$(PERL_MALLOC)" == "undef"
279 .IF "$(DEBUG_MSTATS)" == "define"
280 BUILDOPT += -DPERL_DEBUGGING_MSTATS
283 .IF "$(USE_IMP_SYS) $(USE_MULTI)" == "define undef"
287 .IF "$(USE_ITHREADS) $(USE_MULTI)" == "define undef"
291 .IF "$(USE_SITECUST)" == "define"
292 BUILDOPT += -DUSE_SITECUSTOMIZE
295 .IF "$(USE_MULTI)" != "undef"
296 BUILDOPT += -DPERL_IMPLICIT_CONTEXT
299 .IF "$(USE_IMP_SYS)" != "undef"
300 BUILDOPT += -DPERL_IMPLICIT_SYS
303 .IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432
305 PROCESSOR_ARCHITECTURE *= x86
308 .IF "$(PROCESSOR_ARCHITEW6432)" != ""
309 PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
311 .ELIF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
318 .IF "$(USE_MULTI)" == "define"
319 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
321 .IF "$(USE_PERLIO)" == "define"
322 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
324 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
326 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
329 .IF "$(USE_ITHREADS)" == "define"
330 ARCHNAME !:= $(ARCHNAME)-thread
333 # Visual Studio 98 specific
334 .IF "$(CCTYPE)" == "MSVC60"
336 # VC 6.0 can load the socket dll on demand. Makes the test suite
337 # run in about 10% less time.
338 DELAYLOAD *= -DELAYLOAD:ws2_32.dll -DELAYLOAD:shell32.dll delayimp.lib
340 .IF "$(CFG)" == "Debug"
342 # VC 6.0 seems capable of compiling perl correctly with optimizations
343 # enabled. Anything earlier fails tests.
348 ARCHDIR = ..\lib\$(ARCHNAME)
349 COREDIR = ..\lib\CORE
350 AUTODIR = ..\lib\auto
354 EXTUTILSDIR = $(LIBDIR)\ExtUtils
357 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
358 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
359 INST_LIB = $(INST_TOP)$(INST_VER)\lib
360 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
361 INST_COREDIR = $(INST_ARCHLIB)\CORE
362 INST_POD = $(INST_LIB)\pod
363 INST_HTML = $(INST_TOP)$(INST_VER)\html
366 # Programs to compile, build .lib files and link
371 .IF "$(CCTYPE)" == "BORLAND"
374 .IF "$(BCCOLD)" != "define"
386 INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
387 #PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
388 DEFINES = -DWIN32 $(CRYPT_FLAG)
389 LOCDEFS = -DPERLDLL -DPERL_CORE
395 # same libs as MSVC, except Borland doesn't have oldnames.lib
396 LIBFILES = $(CRYPT_LIB) \
397 kernel32.lib user32.lib gdi32.lib winspool.lib \
398 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
399 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
400 version.lib odbc32.lib odbccp32.lib \
403 .IF "$(CFG)" == "Debug"
404 OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
407 OPTIMIZE = -O2 -D_RTLDLL
411 CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
412 $(PCHFLAGS) $(OPTIMIZE)
413 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)" \
418 .IF "$(BCCOLD)" != "define"
420 DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
422 .IF "$(BCCVCL)" == "define"
423 LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
424 LINK_FLAGS += -L"$(CCLIBDIR)\Release"
428 .ELIF "$(CCTYPE)" == "GCC"
444 INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
445 DEFINES = -DWIN32 $(CRYPT_FLAG)
446 LOCDEFS = -DPERLDLL -DPERL_CORE
453 LIBFILES = $(CRYPT_LIB) $(LIBC) \
454 -lmoldname -lkernel32 -luser32 -lgdi32 \
455 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
456 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \
457 -lwinmm -lversion -lodbc32 -lodbccp32
459 .IF "$(CFG)" == "Debug"
460 OPTIMIZE = -g -O2 -DDEBUGGING
467 CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
468 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
473 # NOTE: we assume that GCC uses MSVCRT.DLL
474 BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
480 LIB32 = $(LINK32) -lib
487 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
488 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
489 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
490 LOCDEFS = -DPERLDLL -DPERL_CORE
494 .IF "$(USE_PERLCRT)" != "define"
500 .IF "$(CFG)" == "Debug"
501 .IF "$(CCTYPE)" == "MSVC20"
502 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
504 OPTIMIZE = -O1 -MD -Zi -DDEBUGGING
508 OPTIMIZE = -MD -Zi -DNDEBUG
509 # we enable debug symbols in release builds also
510 LINK_DBG = -debug -opt:ref,icf
511 # you may want to enable this if you want COFF symbols in the executables
512 # in addition to the PDB symbols. The default Dr. Watson that ships with
513 # Windows can use the the former but not latter. The free WinDbg can be
514 # installed to get better stack traces from just the PDB symbols, so we
515 # avoid the bloat of COFF symbols by default.
516 #LINK_DBG = $(LINK_DBG) -debugtype:both
517 .IF "$(WIN64)" == "define"
518 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
522 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
528 .IF "$(WIN64)" == "define"
529 DEFINES += -DWIN64 -DCONSERVATIVE
530 OPTIMIZE += -Wp64 -Op
533 .IF "$(USE_PERLCRT)" != "define"
534 BUILDOPT += -DPERL_MSVCRT_READFIX
537 LIBBASEFILES = $(CRYPT_LIB) \
538 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
539 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
540 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
543 # win64 doesn't have some libs
544 .IF "$(WIN64)" != "define"
545 LIBBASEFILES += odbc32.lib odbccp32.lib
548 # we add LIBC here, since we may be using PerlCRT.dll
549 LIBFILES = $(LIBBASEFILES) $(LIBC)
551 CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
552 $(PCHFLAGS) $(OPTIMIZE)
553 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
554 -libpath:"$(INST_COREDIR)" \
555 -machine:$(PROCESSOR_ARCHITECTURE)
562 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
564 # used to allow local linking flags that are not propogated into Config.pm,
568 BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
570 #################### do not edit below this line #######################
571 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
573 # Some dmake's built with Borland C++, including Sarathy's one at:
574 # http://search.cpan.org/CPAN/authors/id/G/GS/GSAR/dmake-4.1pl1-win32.zip
575 # require backslashes to be doubled-up when written to $(mktmp) files.
576 # Other dmake's do not require this and would actually output a double
577 # backslash if they were doubled-up.
578 .IF "$(shell @type $(mktmp \\))"=="\\"
584 # There is a related issue with other escape sequences: Sarathy's old
585 # dmake automatically maps escape sequences like \n to their ASCII values
586 # when used in macros, while other dmake's only do so if this behaviour
587 # is explicitly requested with the :m modifier.
589 .IF "$(shell @type $(mktmp \n))"=="\n"
605 .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
608 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
611 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
617 .IF "$(CCTYPE)" == "BORLAND"
618 $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
619 $(IMPLIB) $(*B).lib $@
620 .ELIF "$(CCTYPE)" == "GCC"
621 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
622 $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
624 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
625 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
629 .IF "$(CCTYPE)" == "GCC"
630 $(RSC) --use-temp-file -i $< -o $@
637 MINIPERL = ..\miniperl.exe
639 PERLEXE = ..\perl.exe
640 WPERLEXE = ..\wperl.exe
641 GLOBEXE = ..\perlglob.exe
642 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
643 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
646 # Unicode data files generated by mktables
647 UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
648 ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
649 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
650 ..\lib\unicore\PVA.pl
652 # Directories of Unicode data files generated by mktables
653 UNIDATADIR1 = ..\lib\unicore\To
654 UNIDATADIR2 = ..\lib\unicore\lib
656 PERLEXE_ICO = .\perlexe.ico
657 PERLEXE_RES = .\perlexe.res
660 # Nominate a target which causes extensions to be re-built
661 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
662 # on and really only the interface - i.e. the .def file used to export symbols
664 PERLDEP = perldll.def
667 PL2BAT = bin\pl2bat.pl
668 GLOBBAT = bin\perlglob.bat
708 .IF "$(CCTYPE)" == "BORLAND"
710 CFGSH_TMPL = config.bc
711 CFGH_TMPL = config_H.bc
713 .ELIF "$(CCTYPE)" == "GCC"
715 CFGSH_TMPL = config.gc
716 CFGH_TMPL = config_H.gc
717 PERLIMPLIB = ..\libperl59$(a)
721 .IF "$(WIN64)" == "define"
722 CFGSH_TMPL = config.vc64
723 CFGH_TMPL = config_H.vc64
725 CFGSH_TMPL = config.vc
726 CFGH_TMPL = config_H.vc
731 # makedef.pl must be updated if this changes, and this should normally
732 # only change when there is an incompatible revision of the public API.
733 PERLIMPLIB *= ..\perl59$(a)
734 PERLDLL = ..\perl59.dll
736 XCOPY = xcopy /f /r /i /d
737 RCOPY = xcopy /f /r /i /e /d
741 # filenames given to xsubpp must have forward slashes (since it puts
742 # full pathnames in #line strings)
743 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
782 EXTRACORE_SRC += perllib.c
784 .IF "$(PERL_MALLOC)" == "define"
785 EXTRACORE_SRC += ..\malloc.c
788 EXTRACORE_SRC += ..\perlio.c
795 # We need this for miniperl build unless we override canned
796 # config.h #define building mini\*
797 #.IF "$(USE_PERLIO)" == "define"
798 WIN32_SRC += .\win32io.c
801 .IF "$(CRYPT_SRC)" != ""
802 WIN32_SRC += .\$(CRYPT_SRC)
805 DLL_SRC = $(DYNALOADER).c
852 .\include\sys\socket.h \
855 CORE_H = $(CORE_NOCFG_H) .\config.h
857 MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
858 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
859 WIN32_OBJ = $(WIN32_SRC:db:+$(o))
860 MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
861 MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
862 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
863 DLL_OBJ = $(DLL_SRC:db:+$(o))
864 X2P_OBJ = $(X2P_SRC:db:+$(o))
866 PERLDLL_OBJ = $(CORE_OBJ)
867 PERLEXE_OBJ = perlmain$(o)
869 PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
871 .IF "$(USE_SETARGV)" != ""
872 SETARGV_OBJ = setargv$(o)
875 DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
876 Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
877 Sys/Hostname Storable Filter/Util/Call Encode \
878 Digest/MD5 PerlIO/scalar MIME/Base64 Time/HiRes \
879 Unicode/Normalize Math/BigInt/FastCalc Compress/Zlib Win32
883 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
885 POD2HTML = $(PODDIR)\pod2html
886 POD2MAN = $(PODDIR)\pod2man
887 POD2LATEX = $(PODDIR)\pod2latex
888 POD2TEXT = $(PODDIR)\pod2text
890 # vars must be separated by "\t+~\t+", since we're using the tempfile
891 # version of config_sh.pl (we were overflowing someone's buffer by
892 # trying to fit them all on the command line)
895 INST_DRV=$(INST_DRV) ~ \
896 INST_TOP=$(INST_TOP:s,\,$B,) ~ \
897 INST_VER=$(INST_VER:s,\,$B,) ~ \
898 INST_ARCH=$(INST_ARCH) ~ \
899 archname=$(ARCHNAME) ~ \
902 ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
903 cf_email=$(EMAIL) ~ \
904 d_crypt=$(D_CRYPT) ~ \
905 d_mymalloc=$(PERL_MALLOC) ~ \
906 libs=$(LIBFILES:f) ~ \
907 incpath=$(CCINCDIR:s,\,$B,) ~ \
908 libperl=$(PERLIMPLIB:f) ~ \
909 libpth=$(CCLIBDIR:s,\,$B,);$(EXTRALIBDIRS:s,\,$B,) ~ \
916 static_ext=$(STATIC_EXT) ~ \
917 usethreads=$(USE_ITHREADS) ~ \
918 useithreads=$(USE_ITHREADS) ~ \
919 usemultiplicity=$(USE_MULTI) ~ \
920 useperlio=$(USE_PERLIO) ~ \
921 uselargefiles=$(USE_LARGE_FILES) ~ \
922 usesitecustomize=$(USE_SITECUST) ~ \
923 LINK_FLAGS=$(LINK_FLAGS:s,\,$B,) ~ \
927 # set up targets varying between Win95 and WinNT builds
930 .IF "$(IS_WIN95)" == "define"
932 RIGHTMAKE = __switch_makefiles
938 .IMPORT .IGNORE : SystemRoot windir
940 # Don't just .IMPORT OS from the environment because dmake sets OS itself.
941 ENV_OS=$(subst,OS=, $(shell @set OS))
943 .IF "$(ENV_OS)" == "Windows_NT"
944 ODBCCP32_DLL = $(SystemRoot)\system32\odbccp32.dll
946 ODBCCP32_DLL = $(windir)\system\odbccp32.dll
953 all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
954 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
957 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
959 #----------------------------------------------------------------
961 #-------------------- BEGIN Win95 SPECIFIC ----------------------
963 # this target is a jump-off point for Win95
964 # 1. it switches to the Win95-specific makefile if it exists
965 # (__do_switch_makefiles)
966 # 2. it prints a message when the Win95-specific one finishes (__done)
967 # 3. it then kills this makefile by trying to make __no_such_target
969 __switch_makefiles: __do_switch_makefiles __done __no_such_target
971 __do_switch_makefiles:
972 .IF "$(NOTFIRST)" != "true"
973 if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
978 .IF "$(NOTFIRST)" != "true"
980 @echo Build process complete. Ignore any errors after this message.
981 @echo Run "dmake test" to test and "dmake install" to install
984 # dummy targets for Win95-specific makefile
994 # This target is used to generate the new makefile (.\makefile.95) for Win95
996 .\makefile.95: .\makefile.mk
997 $(MINIPERL) genmk95.pl makefile.mk $(MK2)
999 #--------------------- END Win95 SPECIFIC ---------------------
1001 # a blank target for when builds don't need to do certain things
1002 # this target added for Win95 port but used to keep the WinNT port able to
1007 $(GLOBEXE) : perlglob$(o)
1008 .IF "$(CCTYPE)" == "BORLAND"
1009 $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
1010 $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
1011 "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
1012 .ELIF "$(CCTYPE)" == "GCC"
1013 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
1015 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
1016 perlglob$(o) setargv$(o)
1019 perlglob$(o) : perlglob.c
1021 config.w32 : $(CFGSH_TMPL)
1022 copy $(CFGSH_TMPL) config.w32
1024 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
1026 copy $(CFGH_TMPL) config.h
1028 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
1029 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
1030 $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
1032 # this target is for when changes to the main config.sh happen
1033 # edit config.{b,v,g}c and make this target once for each supported
1034 # compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
1036 perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
1037 $(CFGSH_TMPL) > ..\config.sh
1038 -cd .. && del /f perl.exe
1039 -cd .. && del /f perl*.dll
1040 cd .. && perl configpm
1041 -del /f $(CFGH_TMPL)
1043 -perl config_h.PL "INST_VER=$(INST_VER)"
1044 rename config.h $(CFGH_TMPL)
1046 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
1047 cd .. && miniperl configpm
1048 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
1049 $(XCOPY) ..\*.h $(COREDIR)\*.*
1050 $(XCOPY) *.h $(COREDIR)\*.*
1051 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
1052 $(RCOPY) include $(COREDIR)\*.*
1053 $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
1054 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
1056 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
1057 .IF "$(CCTYPE)" == "BORLAND"
1058 if not exist $(CCLIBDIR)\PSDK\odbccp32.lib \
1059 cd $(CCLIBDIR)\PSDK && implib odbccp32.lib $(ODBCCP32_DLL)
1060 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1061 @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,$B,),$(@:s,\,$B,),,$(LIBFILES),)
1062 .ELIF "$(CCTYPE)" == "GCC"
1063 $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
1064 $(mktmp $(LKPRE) $(MINI_OBJ:s,\,$B,) $(LIBFILES) $(LKPOST))
1066 $(LINK32) -subsystem:console -out:$@ \
1067 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,$B,))
1071 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
1073 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
1074 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
1076 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
1077 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
1079 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
1080 # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
1081 # unless the .IF is true), so instead we use a .ELSE with the default.
1082 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
1084 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
1085 .IF "$(USE_IMP_SYS)" == "define"
1086 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
1088 $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
1091 # 1. we don't want to rebuild miniperl.exe when config.h changes
1092 # 2. we don't want to rebuild miniperl.exe with non-default config.h
1093 $(MINI_OBJ) : $(CORE_NOCFG_H)
1095 $(WIN32_OBJ) : $(CORE_H)
1097 $(CORE_OBJ) : $(CORE_H)
1099 $(DLL_OBJ) : $(CORE_H)
1101 $(X2P_OBJ) : $(CORE_H)
1103 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
1104 $(MINIPERL) -I..\lib buildext.pl --create-perllibst-h
1105 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
1106 $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
1108 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
1109 .IF "$(CCTYPE)" == "BORLAND"
1110 $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
1111 @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,$B,)$N \
1113 $(subst,\,$B $(shell @type Extensions_static)) $(LIBFILES)$N \
1116 .ELIF "$(CCTYPE)" == "GCC"
1117 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
1118 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,$B,) \
1119 $(subst,\,$B $(shell @type Extensions_static)) \
1120 $(LIBFILES) $(LKPOST))
1121 dlltool --output-lib $(PERLIMPLIB) \
1122 --dllname $(PERLDLL:b).dll \
1124 --base-file perl.base \
1125 --output-exp perl.exp
1126 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
1127 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,$B,) \
1128 $(subst,\,$B $(shell @type Extensions_static)) \
1129 $(LIBFILES) perl.exp $(LKPOST))
1131 $(LINK32) -dll -def:perldll.def -out:$@ \
1132 @Extensions_static \
1133 @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
1134 $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,$B,))
1136 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1139 $(PERLEXE_ICO): $(MINIPERL) makeico.pl
1140 $(MINIPERL) makeico.pl > $@
1142 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
1144 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1145 cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1147 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1148 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1150 ..\x2p\hash$(o) : ..\x2p\hash.c
1151 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1153 ..\x2p\str$(o) : ..\x2p\str.c
1154 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1156 ..\x2p\util$(o) : ..\x2p\util.c
1157 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1159 ..\x2p\walk$(o) : ..\x2p\walk.c
1160 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1162 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1163 $(MINIPERL) ..\x2p\find2perl.PL
1164 $(MINIPERL) ..\x2p\s2p.PL
1165 .IF "$(CCTYPE)" == "BORLAND"
1166 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1167 @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,$B,),$(@:s,\,$B,),,$(LIBFILES),)
1168 .ELIF "$(CCTYPE)" == "GCC"
1169 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1170 $(mktmp $(LKPRE) $(X2P_OBJ:s,\,$B,) $(LIBFILES) $(LKPOST))
1172 $(LINK32) -subsystem:console -out:$@ \
1173 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,$B,))
1176 perlmain.c : runperl.c
1177 copy runperl.c perlmain.c
1179 perlmain$(o) : perlmain.c
1180 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1182 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1183 .IF "$(CCTYPE)" == "BORLAND"
1184 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1185 @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,$B,)$N \
1187 $(PERLIMPLIB) $(LIBFILES)$N)
1188 .ELIF "$(CCTYPE)" == "GCC"
1189 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1190 $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
1192 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1193 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1195 copy $(PERLEXE) $(WPERLEXE)
1196 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1197 copy splittree.pl ..
1198 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1200 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1201 if not exist $(AUTODIR) mkdir $(AUTODIR)
1202 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1203 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1204 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1205 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1206 cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
1207 $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
1209 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1210 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1212 #-------------------------------------------------------------------------------
1213 Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
1214 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic
1215 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
1217 Extensions_static : buildext.pl
1218 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
1219 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
1220 $(MINIPERL) -I..\lib buildext.pl --list-static-libs > Extensions_static
1223 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1224 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
1226 Extensions_realclean :
1227 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
1228 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
1230 #-------------------------------------------------------------------------------
1234 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
1235 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
1236 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1238 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1239 # so please check that script before making structural changes here
1240 utils: $(PERLEXE) $(X2P)
1241 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1242 copy ..\vms\perlvms.pod ..\pod\perlvms.pod
1243 copy ..\README.aix ..\pod\perlaix.pod
1244 copy ..\README.amiga ..\pod\perlamiga.pod
1245 copy ..\README.apollo ..\pod\perlapollo.pod
1246 copy ..\README.beos ..\pod\perlbeos.pod
1247 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1248 copy ..\README.ce ..\pod\perlce.pod
1249 copy ..\README.cn ..\pod\perlcn.pod
1250 copy ..\README.cygwin ..\pod\perlcygwin.pod
1251 copy ..\README.dgux ..\pod\perldgux.pod
1252 copy ..\README.dos ..\pod\perldos.pod
1253 copy ..\README.epoc ..\pod\perlepoc.pod
1254 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1255 copy ..\README.hpux ..\pod\perlhpux.pod
1256 copy ..\README.hurd ..\pod\perlhurd.pod
1257 copy ..\README.irix ..\pod\perlirix.pod
1258 copy ..\README.jp ..\pod\perljp.pod
1259 copy ..\README.ko ..\pod\perlko.pod
1260 copy ..\README.machten ..\pod\perlmachten.pod
1261 copy ..\README.macos ..\pod\perlmacos.pod
1262 copy ..\README.macosx ..\pod\perlmacosx.pod
1263 copy ..\README.mint ..\pod\perlmint.pod
1264 copy ..\README.mpeix ..\pod\perlmpeix.pod
1265 copy ..\README.netware ..\pod\perlnetware.pod
1266 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1267 copy ..\README.os2 ..\pod\perlos2.pod
1268 copy ..\README.os390 ..\pod\perlos390.pod
1269 copy ..\README.os400 ..\pod\perlos400.pod
1270 copy ..\README.plan9 ..\pod\perlplan9.pod
1271 copy ..\README.qnx ..\pod\perlqnx.pod
1272 copy ..\README.solaris ..\pod\perlsolaris.pod
1273 copy ..\README.symbian ..\pod\perlsymbian.pod
1274 copy ..\README.tru64 ..\pod\perltru64.pod
1275 copy ..\README.tw ..\pod\perltw.pod
1276 copy ..\README.uts ..\pod\perluts.pod
1277 copy ..\README.vmesa ..\pod\perlvmesa.pod
1278 copy ..\README.vms ..\pod\perlvms.pod
1279 copy ..\README.vos ..\pod\perlvos.pod
1280 copy ..\README.win32 ..\pod\perlwin32.pod
1281 copy ..\pod\perl593delta.pod ..\pod\perldelta.pod
1282 cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
1283 cd ..\lib && $(PERLEXE) lib_pm.PL
1284 $(PERLEXE) $(PL2BAT) $(UTILS)
1286 # Note that the pod cleanup in this next section is parsed (and regenerated
1287 # by pod/buildtoc so please check that script before making changes here
1289 # the doubled rmdir calls are needed because older cmd shells
1290 # don't understand /q
1291 distclean: realclean
1292 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1293 $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
1295 -del /f $(DYNALOADER).c
1296 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1297 -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
1298 -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
1299 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1300 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1301 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1302 -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
1303 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1304 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1305 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1306 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1307 -del /f $(LIBDIR)\ByteLoader.pm
1308 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1309 -del /f $(LIBDIR)\Devel\PPPort.pm
1310 -del /f $(LIBDIR)\File\Glob.pm
1311 -del /f $(LIBDIR)\Storable.pm
1312 -del /f $(LIBDIR)\Digest\MD5.pm
1313 -del /f $(LIBDIR)\PerlIO\encoding.pm
1314 -del /f $(LIBDIR)\PerlIO\scalar.pm
1315 -del /f $(LIBDIR)\PerlIO\via.pm
1316 -del /f $(LIBDIR)\Sys\Hostname.pm
1317 -del /f $(LIBDIR)\Thread\Signal.pm $(LIBDIR)\Thread\Specific.pm
1318 -del /f $(LIBDIR)\threads\shared.pm
1319 -del /f $(LIBDIR)\Time\HiRes.pm
1320 -del /f $(LIBDIR)\Unicode\Normalize.pm
1321 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1322 -del /f $(LIBDIR)\Win32.pm
1323 -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
1324 -if exist $(LIBDIR)\IO\Socket rmdir /s $(LIBDIR)\IO\Socket
1325 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1326 -if exist $(LIBDIR)\B rmdir /s $(LIBDIR)\B
1327 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1328 -if exist $(LIBDIR)\Data rmdir /s $(LIBDIR)\Data
1329 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1330 -if exist $(LIBDIR)\Encode rmdir /s $(LIBDIR)\Encode
1331 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1332 -if exist $(LIBDIR)\Filter\Util rmdir /s $(LIBDIR)\Filter\Util
1333 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1334 -if exist $(LIBDIR)\MIME rmdir /s $(LIBDIR)\MIME
1335 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1336 -if exist $(LIBDIR)\List rmdir /s $(LIBDIR)\List
1337 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1338 -if exist $(LIBDIR)\Scalar rmdir /s $(LIBDIR)\Scalar
1339 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1340 -if exist $(LIBDIR)\Sys rmdir /s $(LIBDIR)\Sys
1341 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1342 -if exist $(LIBDIR)\threads rmdir /s $(LIBDIR)\threads
1343 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1344 -if exist $(LIBDIR)\XS rmdir /s $(LIBDIR)\XS
1345 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1346 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1347 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1348 perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
1349 perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
1350 perljp.pod perlko.pod perlmachten.pod perlmacos.pod \
1351 perlmacosx.pod perlmint.pod perlmpeix.pod perlnetware.pod \
1352 perlopenbsd.pod perlos2.pod perlos390.pod perlos400.pod \
1353 perlplan9.pod perlqnx.pod perlsolaris.pod perlsymbian.pod \
1354 perltru64.pod perltw.pod perluts.pod perlvmesa.pod perlvms.pod \
1355 perlvms.pod perlvos.pod perlwin32.pod \
1356 pod2html pod2latex pod2man pod2text pod2usage \
1357 podchecker podselect
1358 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1359 perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv cpan *.bat \
1360 xsubpp instmodsh prove ptar corelist
1361 -cd ..\x2p && del /f find2perl s2p psed *.bat
1362 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1366 -del /f $(PERLEXE_ICO) perl.base
1367 -cd .. && del /s *$(a) *.map *.pdb *.ilk *.tds *.bs *$(o) .exists pm_to_blib
1368 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1369 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1370 -if exist $(AUTODIR) rmdir /s $(AUTODIR)
1371 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1372 -if exist $(COREDIR) rmdir /s $(COREDIR)
1374 install : all installbare installhtml
1376 installbare : $(RIGHTMAKE) utils
1377 $(PERLEXE) ..\installperl
1378 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1379 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1380 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1381 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1382 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1385 $(RCOPY) html\*.* $(INST_HTML)\*.*
1387 inst_lib : $(CONFIGPM)
1388 copy splittree.pl ..
1389 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1390 $(RCOPY) ..\lib $(INST_LIB)\*.*
1392 $(UNIDATAFILES) .UPDATEALL : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
1393 cd ..\lib\unicore && \
1394 ..\$(MINIPERL) -I.. mktables
1396 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils
1397 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1398 if exist ..\t\perl.exe del /f ..\t\perl.exe
1399 rename ..\t\miniperl.exe perl.exe
1400 .IF "$(CCTYPE)" == "BORLAND"
1401 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1403 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1407 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1409 test-prep : all utils
1410 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1411 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1412 .IF "$(CCTYPE)" == "BORLAND"
1413 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1415 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1418 test : $(RIGHTMAKE) test-prep
1419 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1421 test-notty : test-prep
1422 set PERL_SKIP_TTY_TEST=1 && \
1423 cd ..\t && $(PERLEXE) -I.\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1425 _test : $(RIGHTMAKE)
1426 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1427 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1428 .IF "$(CCTYPE)" == "BORLAND"
1429 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1431 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1433 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1435 # the doubled rmdir calls are needed because older cmd shells
1436 # don't understand /q
1438 -@erase miniperlmain$(o)
1440 -@erase perlglob$(o)
1441 -@erase perlmain$(o)
1449 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1450 -if exist $(MINIDIR) rmdir /s $(MINIDIR)
1451 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1452 -if exist $(UNIDATADIR1) rmdir /s $(UNIDATADIR1)
1453 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1454 -if exist $(UNIDATADIR2) rmdir /s $(UNIDATADIR2)
1455 -@erase $(UNIDATAFILES)
1456 -@erase $(WIN32_OBJ)
1459 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1460 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1461 -@erase ..\x2p\*.exe ..\x2p\*.bat
1465 -@erase Extensions_static
1467 clean : Extensions_clean _clean
1469 realclean : Extensions_realclean _clean
1471 # Handy way to run perlbug -ok without having to install and run the
1472 # installed perlbug. We don't re-run the tests here - we trust the user.
1473 # Please *don't* use this unless all tests pass.
1474 # If you want to report test failures, use "dmake nok" instead.
1476 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1479 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1482 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1485 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok