Commit | Line | Data |
---|---|---|
342634f3 | 1 | # |
b6e5775f DD |
2 | # Makefile to build perl on Windows using GMAKE. |
3 | # Supported compilers: | |
4 | # Microsoft Visual C++ 6.0 or later | |
5 | # MinGW with gcc-3.4.5 or later | |
6 | # Windows SDK 64-bit compiler and tools | |
342634f3 | 7 | # |
8 | # This is set up to build a perl.exe that runs off a shared library | |
c02894f5 | 9 | # (perl525.dll). Also makes individual DLLs for the XS extensions. |
342634f3 | 10 | # |
11 | # The easiest way to customize the build process is to use parameters like this: | |
12 | # | |
13 | # c:\dev\perlsrc\win32> gmake INST_TOP=c:\sw\perl CCHOME=c:\sw\mingw USE_64_BIT_INT=define | |
14 | ||
15 | ||
16 | ## | |
17 | ## Make sure you read README.win32 *before* you mess with anything here! | |
18 | ## | |
19 | ||
20 | # | |
21 | # We set this to point to cmd.exe in case GNU Make finds sh.exe in the path. | |
22 | # Comment this line out if necessary | |
23 | # | |
24 | SHELL := cmd.exe | |
25 | ||
26 | # define whether you want to use native gcc compiler or cross-compiler | |
27 | # possible values: gcc | |
28 | # i686-w64-mingw32-gcc | |
29 | # x86_64-w64-mingw32-gcc | |
30 | GCCBIN := gcc | |
31 | ||
32 | ifeq ($(GCCBIN),x86_64-w64-mingw32-gcc) | |
33 | GCCCROSS := x86_64-w64-mingw32 | |
34 | endif | |
35 | ifeq ($(GCCBIN),i686-w64-mingw32-gcc) | |
36 | GCCCROSS := i686-w64-mingw32 | |
37 | endif | |
38 | ||
342634f3 | 39 | |
342634f3 | 40 | ## |
41 | ## Build configuration. Edit the values below to suit your needs. | |
42 | ## | |
43 | ||
44 | # | |
45 | # Set these to wherever you want "gmake install" to put your | |
46 | # newly built perl. | |
47 | # | |
48 | INST_DRV := c: | |
49 | INST_TOP := $(INST_DRV)\perl | |
50 | ||
51 | # | |
b6e5775f DD |
52 | # Uncomment if you want to build a 32-bit Perl using a 32-bit compiler |
53 | # on a 64-bit version of Windows. | |
54 | # | |
55 | #WIN64 := undef | |
56 | ||
57 | # | |
342634f3 | 58 | # Comment this out if you DON'T want your perl installation to be versioned. |
59 | # This means that the new installation will overwrite any files from the | |
60 | # old installation at the same INST_TOP location. Leaving it enabled is | |
61 | # the safest route, as perl adds the extra version directory to all the | |
62 | # locations it installs files to. If you disable it, an alternative | |
63 | # versioned installation can be obtained by setting INST_TOP above to a | |
64 | # path that includes an arbitrary version string. | |
65 | # | |
acc7b1ff | 66 | #INST_VER := \5.25.7 |
342634f3 | 67 | |
68 | # | |
69 | # Comment this out if you DON'T want your perl installation to have | |
70 | # architecture specific components. This means that architecture- | |
71 | # specific files will be installed along with the architecture-neutral | |
72 | # files. Leaving it enabled is safer and more flexible, in case you | |
73 | # want to build multiple flavors of perl and install them together in | |
74 | # the same location. Commenting it out gives you a simpler | |
75 | # installation that is easier to understand for beginners. | |
76 | # | |
77 | #INST_ARCH := \$(ARCHNAME) | |
78 | ||
79 | # | |
80 | # Uncomment this if you want perl to run | |
81 | # $Config{sitelibexp}\sitecustomize.pl | |
82 | # before anything else. This script can then be set up, for example, | |
83 | # to add additional entries to @INC. | |
84 | # | |
85 | #USE_SITECUST := define | |
86 | ||
87 | # | |
88 | # uncomment to enable multiple interpreters. This is needed for fork() | |
89 | # emulation and for thread support, and is auto-enabled by USE_IMP_SYS | |
90 | # and USE_ITHREADS below. | |
91 | # | |
92 | USE_MULTI := define | |
93 | ||
94 | # | |
95 | # Interpreter cloning/threads; now reasonably complete. | |
96 | # This should be enabled to get the fork() emulation. This needs (and | |
97 | # will auto-enable) USE_MULTI above. | |
98 | # | |
99 | USE_ITHREADS := define | |
100 | ||
101 | # | |
102 | # uncomment to enable the implicit "host" layer for all system calls | |
103 | # made by perl. This is also needed to get fork(). This needs (and | |
104 | # will auto-enable) USE_MULTI above. | |
105 | # | |
106 | USE_IMP_SYS := define | |
107 | ||
108 | # | |
109 | # Comment out next assign to disable perl's I/O subsystem and use compiler's | |
110 | # stdio for IO - depending on your compiler vendor and run time library you may | |
111 | # then get a number of fails from make test i.e. bugs - complain to them not us ;-). | |
112 | # You will also be unable to take full advantage of perl5.8's support for multiple | |
113 | # encodings and may see lower IO performance. You have been warned. | |
114 | # | |
115 | USE_PERLIO := define | |
116 | ||
117 | # | |
118 | # Comment this out if you don't want to enable large file support for | |
119 | # some reason. Should normally only be changed to maintain compatibility | |
120 | # with an older release of perl. | |
121 | # | |
122 | USE_LARGE_FILES := define | |
123 | ||
124 | # | |
125 | # Uncomment this if you're building a 32-bit perl and want 64-bit integers. | |
126 | # (If you're building a 64-bit perl then you will have 64-bit integers whether | |
127 | # or not this is uncommented.) | |
128 | # Note: This option is not supported in 32-bit MSVC60 builds. | |
129 | # | |
130 | #USE_64_BIT_INT := define | |
131 | ||
132 | # | |
b6e5775f DD |
133 | # Uncomment this if you want to support the use of long doubles in GCC builds. |
134 | # This option is not supported for MSVC builds. | |
342634f3 | 135 | # |
136 | #USE_LONG_DOUBLE :=define | |
137 | ||
138 | # | |
bf543eaf DD |
139 | # Uncomment this if you want to disable looking up values from |
140 | # HKEY_CURRENT_USER\Software\Perl and HKEY_LOCAL_MACHINE\Software\Perl in | |
141 | # the Registry. | |
142 | # | |
143 | #USE_NO_REGISTRY := define | |
144 | ||
145 | # | |
b6e5775f DD |
146 | # uncomment exactly one of the following |
147 | # | |
148 | # Visual C++ 6.0 (aka Visual C++ 98) | |
149 | #CCTYPE := MSVC60 | |
150 | # Visual C++ .NET 2002/2003 (aka Visual C++ 7.0/7.1) (full version) | |
151 | #CCTYPE := MSVC70 | |
152 | # Visual C++ Toolkit 2003 (aka Visual C++ 7.1) (free command-line tools) | |
153 | #CCTYPE := MSVC70FREE | |
154 | # Windows Server 2003 SP1 Platform SDK (April 2005) | |
155 | #CCTYPE := SDK2003SP1 | |
156 | # Visual C++ 2005 (aka Visual C++ 8.0) (full version) | |
157 | #CCTYPE := MSVC80 | |
158 | # Visual C++ 2005 Express Edition (aka Visual C++ 8.0) (free version) | |
159 | #CCTYPE := MSVC80FREE | |
160 | # Visual C++ 2008 (aka Visual C++ 9.0) (full version) | |
161 | #CCTYPE := MSVC90 | |
162 | # Visual C++ 2008 Express Edition (aka Visual C++ 9.0) (free version) | |
163 | #CCTYPE := MSVC90FREE | |
164 | # Visual C++ 2010 (aka Visual C++ 10.0) (full version) | |
165 | #CCTYPE := MSVC100 | |
166 | # Visual C++ 2010 Express Edition (aka Visual C++ 10.0) (free version) | |
167 | #CCTYPE := MSVC100FREE | |
168 | # Visual C++ 2012 (aka Visual C++ 11.0) (full version) | |
169 | #CCTYPE := MSVC110 | |
170 | # Visual C++ 2012 Express Edition (aka Visual C++ 11.0) (free version) | |
171 | #CCTYPE := MSVC110FREE | |
172 | # Visual C++ 2013 (aka Visual C++ 12.0) (full version) | |
173 | #CCTYPE := MSVC120 | |
174 | # Visual C++ 2013 Express Edition (aka Visual C++ 12.0) (free version) | |
175 | #CCTYPE := MSVC120FREE | |
176 | # MinGW or mingw-w64 with gcc-3.4.5 or later | |
ca30c090 | 177 | #CCTYPE := GCC |
b6e5775f DD |
178 | |
179 | # | |
180 | # If you are using Intel C++ Compiler uncomment this | |
181 | # | |
182 | #__ICC := define | |
183 | ||
184 | # | |
bf543eaf | 185 | # uncomment next line if you want debug version of perl (big/slow) |
342634f3 | 186 | # If not enabled, we automatically try to use maximum optimization |
187 | # with all compilers that are known to have a working optimizer. | |
188 | # | |
189 | #CFG := Debug | |
190 | ||
191 | # | |
192 | # uncomment to enable linking with setargv.obj under the Visual C | |
193 | # compiler. Setting this options enables perl to expand wildcards in | |
194 | # arguments, but it may be harder to use alternate methods like | |
195 | # File::DosGlob that are more powerful. This option is supported only with | |
196 | # Visual C. | |
197 | # | |
198 | #USE_SETARGV := define | |
199 | ||
200 | # | |
201 | # set this if you wish to use perl's malloc | |
202 | # WARNING: Turning this on/off WILL break binary compatibility with extensions | |
203 | # you may have compiled with/without it. Be prepared to recompile all | |
204 | # extensions if you change the default. Currently, this cannot be enabled | |
205 | # if you ask for USE_IMP_SYS above. | |
206 | # | |
207 | #PERL_MALLOC := define | |
208 | ||
209 | # | |
210 | # set this to enable debugging mstats | |
211 | # This must be enabled to use the Devel::Peek::mstat() function. This cannot | |
212 | # be enabled without PERL_MALLOC as well. | |
213 | # | |
214 | #DEBUG_MSTATS := define | |
215 | ||
216 | # | |
217 | # set this to additionally provide a statically linked perl-static.exe. | |
218 | # Note that dynamic loading will not work with this perl, so you must | |
219 | # include required modules statically using the STATIC_EXT or ALL_STATIC | |
c02894f5 | 220 | # variables below. A static library perl525s.lib will also be created. |
342634f3 | 221 | # Ordinary perl.exe is not affected by this option. |
222 | # | |
223 | #BUILD_STATIC := define | |
224 | ||
225 | # | |
226 | # in addition to BUILD_STATIC the option ALL_STATIC makes *every* | |
227 | # extension get statically built | |
228 | # This will result in a very large perl executable, but the main purpose | |
229 | # is to have proper linking set so as to be able to create miscellaneous | |
230 | # executables with different built-in extensions | |
231 | # | |
232 | #ALL_STATIC := define | |
233 | ||
234 | # | |
235 | # set the install locations of the compiler include/libraries | |
236 | # Running VCVARS32.BAT is *required* when using Visual C. | |
237 | # Some versions of Visual C don't define MSVCDIR in the environment, | |
238 | # so you may have to set CCHOME explicitly (spaces in the path name should | |
239 | # not be quoted) | |
240 | # | |
f82c7fdb | 241 | #CCHOME := C:\MinGW |
342634f3 | 242 | |
243 | # | |
244 | # Additional compiler flags can be specified here. | |
245 | # | |
246 | BUILDOPT := $(BUILDOPTEXTRA) | |
247 | ||
248 | # | |
249 | # This should normally be disabled. Enabling it will disable the File::Glob | |
250 | # implementation of CORE::glob. | |
251 | # | |
252 | #BUILDOPT += -DPERL_EXTERNAL_GLOB | |
253 | ||
254 | # | |
255 | # Perl needs to read scripts in text mode so that the DATA filehandle | |
256 | # works correctly with seek() and tell(), or around auto-flushes of | |
257 | # all filehandles (e.g. by system(), backticks, fork(), etc). | |
258 | # | |
259 | # The current version on the ByteLoader module on CPAN however only | |
260 | # works if scripts are read in binary mode. But before you disable text | |
261 | # mode script reading (and break some DATA filehandle functionality) | |
262 | # please check first if an updated ByteLoader isn't available on CPAN. | |
263 | # | |
264 | BUILDOPT += -DPERL_TEXTMODE_SCRIPTS | |
265 | ||
266 | # | |
267 | # specify semicolon-separated list of extra directories that modules will | |
268 | # look for libraries (spaces in path names need not be quoted) | |
269 | # | |
270 | EXTRALIBDIRS := | |
271 | ||
272 | # | |
273 | # set this to your email address (perl will guess a value from | |
274 | # from your loginname and your hostname, which may not be right) | |
275 | # | |
276 | #EMAIL := | |
277 | ||
278 | ## | |
279 | ## Build configuration ends. | |
280 | ## | |
281 | ||
282 | ##################### CHANGE THESE ONLY IF YOU MUST ##################### | |
283 | ||
284 | PERL_MALLOC ?= undef | |
285 | DEBUG_MSTATS ?= undef | |
286 | ||
287 | USE_SITECUST ?= undef | |
288 | USE_MULTI ?= undef | |
289 | USE_ITHREADS ?= undef | |
290 | USE_IMP_SYS ?= undef | |
291 | USE_PERLIO ?= undef | |
292 | USE_LARGE_FILES ?= undef | |
293 | USE_64_BIT_INT ?= undef | |
294 | USE_LONG_DOUBLE ?= undef | |
bf543eaf | 295 | USE_NO_REGISTRY ?= undef |
342634f3 | 296 | |
297 | ifeq ($(USE_IMP_SYS),define) | |
298 | PERL_MALLOC = undef | |
299 | endif | |
300 | ||
301 | ifeq ($(PERL_MALLOC),undef) | |
302 | DEBUG_MSTATS = undef | |
303 | endif | |
304 | ||
305 | ifeq ($(DEBUG_MSTATS),define) | |
306 | BUILDOPT += -DPERL_DEBUGGING_MSTATS | |
307 | endif | |
308 | ||
309 | ifeq ("$(USE_IMP_SYS) $(USE_MULTI)","define undef") | |
310 | USE_MULTI = define | |
311 | endif | |
312 | ||
313 | ifeq ("$(USE_ITHREADS) $(USE_MULTI)","define undef") | |
314 | USE_MULTI = define | |
315 | endif | |
316 | ||
317 | ifeq ($(USE_SITECUST),define) | |
318 | BUILDOPT += -DUSE_SITECUSTOMIZE | |
319 | endif | |
320 | ||
321 | ifneq ($(USE_MULTI),undef) | |
322 | BUILDOPT += -DPERL_IMPLICIT_CONTEXT | |
323 | endif | |
324 | ||
325 | ifneq ($(USE_IMP_SYS),undef) | |
326 | BUILDOPT += -DPERL_IMPLICIT_SYS | |
327 | endif | |
328 | ||
bf543eaf DD |
329 | ifeq ($(USE_NO_REGISTRY),define) |
330 | BUILDOPT += -DWIN32_NO_REGISTRY | |
331 | endif | |
332 | ||
745dedb9 | 333 | ifeq ($(CCTYPE),GCC) |
ca30c090 DD |
334 | GCCTARGET := $(shell $(GCCBIN) -dumpmachine) |
335 | endif | |
336 | ||
337 | #no explicit CCTYPE given, do auto detection | |
338 | ifeq ($(CCTYPE),) | |
339 | GCCTARGET := $(shell $(GCCBIN) -dumpmachine 2>NUL) | |
340 | #do we have a GCC? | |
341 | ifneq ($(GCCTARGET),) | |
342 | CCTYPE := GCC | |
343 | else | |
344 | #use var to capture 1st line only, not 8th token of lines 2 & 3 in cl.exe output | |
345 | #rmving the cmd /c causes the var2b undef4echo but!4"set MSVCVER", cmd.exe bug? | |
346 | MSVCVER := $(shell (set MSVCVER=) & (for /f "tokens=8 delims=.^ " \ | |
347 | %%i in ('cl ^2^>^&1') do if not defined MSVCVER set /A "MSVCVER=%%i-6") \ | |
348 | & cmd /c echo %%MSVCVER%%) | |
349 | CCTYPE := MSVC$(MSVCVER)0 | |
350 | endif | |
351 | endif | |
352 | ||
f82c7fdb DD |
353 | ifeq ($(CCHOME),) |
354 | ifeq ($(CCTYPE),GCC) | |
355 | CCHOME := C:\MinGW | |
356 | else | |
357 | CCHOME := $(MSVCDIR) | |
358 | endif | |
359 | endif | |
360 | ||
361 | # | |
362 | # Following sets $Config{incpath} and $Config{libpth} | |
363 | # | |
364 | ||
365 | ifneq ($(GCCCROSS),) | |
366 | CCINCDIR := $(CCHOME)\$(GCCCROSS)\include | |
367 | CCLIBDIR := $(CCHOME)\$(GCCCROSS)\lib | |
368 | CCDLLDIR := $(CCLIBDIR) | |
369 | ARCHPREFIX := $(GCCCROSS)- | |
370 | else | |
371 | CCINCDIR := $(CCHOME)\include | |
372 | CCLIBDIR := $(CCHOME)\lib | |
373 | CCDLLDIR := $(CCHOME)\bin | |
374 | ARCHPREFIX := | |
375 | endif | |
ca30c090 DD |
376 | |
377 | ifeq ($(CCTYPE),GCC) | |
745dedb9 DD |
378 | ifeq ($(GCCTARGET),x86_64-w64-mingw32) |
379 | WIN64 := define | |
ae146f54 | 380 | PROCESSOR_ARCHITECTURE := x64 |
745dedb9 DD |
381 | endif |
382 | ifeq ($(GCCTARGET),i686-w64-mingw32) | |
383 | WIN64 := undef | |
ae146f54 | 384 | PROCESSOR_ARCHITECTURE := x86 |
745dedb9 DD |
385 | endif |
386 | endif | |
387 | ||
b6e5775f DD |
388 | PROCESSOR_ARCHITECTURE ?= x86 |
389 | ||
390 | ifeq ($(WIN64),undef) | |
391 | PROCESSOR_ARCHITECTURE = x86 | |
392 | endif | |
393 | ||
394 | ifeq ($(WIN64),) | |
395 | # When we are running from a 32bit cmd.exe on AMD64 then | |
396 | # PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432 | |
397 | # is set to AMD64 | |
398 | ifneq ($(PROCESSOR_ARCHITEW6432),) | |
399 | PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432) | |
400 | WIN64 = define | |
401 | else ifeq ($(PROCESSOR_ARCHITECTURE),AMD64) | |
402 | WIN64 = define | |
403 | else ifeq ($(PROCESSOR_ARCHITECTURE),IA64) | |
404 | WIN64 = define | |
405 | else | |
406 | WIN64 = undef | |
407 | endif | |
408 | endif | |
409 | ||
342634f3 | 410 | ifeq ($(WIN64),define) |
411 | USE_64_BIT_INT = define | |
412 | endif | |
413 | ||
b6e5775f DD |
414 | # Treat 64-bit MSVC60 (doesn't really exist) as SDK2003SP1 because |
415 | # both link against MSVCRT.dll (which is part of Windows itself) and | |
416 | # not against a compiler specific versioned runtime. | |
417 | ifeq ("$(WIN64) $(CCTYPE)","define MSVC60") | |
418 | CCTYPE = SDK2003SP1 | |
419 | endif | |
420 | ||
421 | # Disable the 64-bit-int option for (32-bit) MSVC60 builds since that compiler | |
422 | # does not support it. | |
423 | ifeq ($(CCTYPE),MSVC60) | |
424 | USE_64_BIT_INT = undef | |
425 | endif | |
426 | ||
427 | # Disable the long double option for MSVC builds since that compiler | |
428 | # does not support it. | |
429 | ifneq ($(CCTYPE),GCC) | |
430 | USE_LONG_DOUBLE = undef | |
431 | endif | |
432 | ||
433 | ARCHITECTURE = $(PROCESSOR_ARCHITECTURE) | |
434 | ifeq ($(ARCHITECTURE),AMD64) | |
435 | ARCHITECTURE = x64 | |
436 | endif | |
437 | ifeq ($(ARCHITECTURE),IA64) | |
438 | ARCHITECTURE = ia64 | |
439 | endif | |
440 | ||
342634f3 | 441 | ifeq ($(USE_MULTI),define) |
442 | ARCHNAME = MSWin32-$(ARCHITECTURE)-multi | |
443 | else | |
444 | ifeq ($(USE_PERLIO),define) | |
445 | ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio | |
446 | else | |
447 | ARCHNAME = MSWin32-$(ARCHITECTURE) | |
448 | endif | |
449 | endif | |
450 | ||
451 | ifeq ($(USE_PERLIO),define) | |
452 | BUILDOPT += -DUSE_PERLIO | |
453 | endif | |
454 | ||
455 | ifeq ($(USE_ITHREADS),define) | |
456 | ARCHNAME := $(ARCHNAME)-thread | |
457 | endif | |
458 | ||
459 | ifneq ($(WIN64),define) | |
460 | ifeq ($(USE_64_BIT_INT),define) | |
461 | ARCHNAME := $(ARCHNAME)-64int | |
462 | endif | |
463 | endif | |
464 | ||
465 | ifeq ($(USE_LONG_DOUBLE),define) | |
466 | ARCHNAME := $(ARCHNAME)-ld | |
467 | endif | |
468 | ||
469 | ARCHDIR = ..\lib\$(ARCHNAME) | |
470 | COREDIR = ..\lib\CORE | |
471 | AUTODIR = ..\lib\auto | |
472 | LIBDIR = ..\lib | |
473 | EXTDIR = ..\ext | |
474 | DISTDIR = ..\dist | |
475 | CPANDIR = ..\cpan | |
476 | PODDIR = ..\pod | |
477 | HTMLDIR = .\html | |
478 | ||
479 | # | |
480 | INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin | |
481 | INST_BIN = $(INST_SCRIPT)$(INST_ARCH) | |
482 | INST_LIB = $(INST_TOP)$(INST_VER)\lib | |
483 | INST_ARCHLIB = $(INST_LIB)$(INST_ARCH) | |
484 | INST_COREDIR = $(INST_ARCHLIB)\CORE | |
485 | INST_HTML = $(INST_TOP)$(INST_VER)\html | |
486 | ||
487 | # | |
488 | # Programs to compile, build .lib files and link | |
489 | # | |
490 | ||
491 | MINIBUILDOPT := | |
492 | ||
b6e5775f DD |
493 | ifeq ($(CCTYPE),GCC) |
494 | ||
342634f3 | 495 | CC = $(ARCHPREFIX)gcc |
496 | LINK32 = $(ARCHPREFIX)g++ | |
497 | LIB32 = $(ARCHPREFIX)ar rc | |
498 | IMPLIB = $(ARCHPREFIX)dlltool | |
499 | RSC = $(ARCHPREFIX)windres | |
500 | ||
501 | ifeq ($(USE_LONG_DOUBLE),define) | |
502 | BUILDOPT += -D__USE_MINGW_ANSI_STDIO | |
503 | MINIBUILDOPT += -D__USE_MINGW_ANSI_STDIO | |
504 | endif | |
505 | ||
ca30c090 DD |
506 | GCCVER1 := $(shell for /f "delims=. tokens=1,2,3" %%i in ('gcc -dumpversion') do echo %%i) |
507 | GCCVER2 := $(shell for /f "delims=. tokens=1,2,3" %%i in ('gcc -dumpversion') do echo %%j) | |
508 | GCCVER3 := $(shell for /f "delims=. tokens=1,2,3" %%i in ('gcc -dumpversion') do echo %%k) | |
509 | ||
342634f3 | 510 | # If you are using GCC, 4.3 or later by default we add the -fwrapv option. |
511 | # See https://rt.perl.org/Ticket/Display.html?id=121505 | |
512 | # | |
513 | GCCWRAPV := $(shell if "$(GCCVER1)"=="4" (if "$(GCCVER2)" geq "3" echo define) else if "$(GCCVER1)" geq "5" (echo define)) | |
514 | ||
515 | ifeq ($(GCCWRAPV),define) | |
516 | BUILDOPT += -fwrapv | |
517 | MINIBUILDOPT += -fwrapv | |
518 | endif | |
519 | ||
520 | i = .i | |
521 | o = .o | |
522 | a = .a | |
523 | ||
524 | # | |
525 | # Options | |
526 | # | |
527 | ||
bf543eaf | 528 | INCLUDES = -I.\include -I. -I.. |
342634f3 | 529 | DEFINES = -DWIN32 |
530 | ifeq ($(WIN64),define) | |
531 | DEFINES += -DWIN64 -DCONSERVATIVE | |
532 | endif | |
533 | LOCDEFS = -DPERLDLL -DPERL_CORE | |
342634f3 | 534 | CXX_FLAG = -xc++ |
535 | LIBC = | |
bf543eaf DD |
536 | LIBFILES = $(LIBC) -lmoldname -lkernel32 -luser32 -lgdi32 -lwinspool \ |
537 | -lcomdlg32 -ladvapi32 -lshell32 -lole32 -loleaut32 -lnetapi32 \ | |
538 | -luuid -lws2_32 -lmpr -lwinmm -lversion -lodbc32 -lodbccp32 -lcomctl32 | |
342634f3 | 539 | |
540 | ifeq ($(CFG),Debug) | |
541 | OPTIMIZE = -g -O2 -DDEBUGGING | |
542 | LINK_DBG = -g | |
543 | else | |
544 | OPTIMIZE = -s -O2 | |
545 | LINK_DBG = -s | |
546 | endif | |
547 | ||
548 | EXTRACFLAGS = | |
549 | CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE) | |
550 | LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)" | |
551 | OBJOUT_FLAG = -o | |
552 | EXEOUT_FLAG = -o | |
553 | LIBOUT_FLAG = | |
bf543eaf | 554 | PDBOUT = |
342634f3 | 555 | |
556 | BUILDOPT += -fno-strict-aliasing -mms-bitfields | |
16d5aac1 | 557 | MINIBUILDOPT += -fno-strict-aliasing |
b6e5775f DD |
558 | |
559 | TESTPREPGCC = test-prep-gcc | |
560 | ||
561 | else | |
562 | ||
563 | o = .obj | |
564 | ||
565 | # All but the free version of VC++ 7.1 can load DLLs on demand. Makes the test | |
566 | # suite run in about 10% less time. | |
567 | ifneq ($(CCTYPE),MSVC70FREE) | |
568 | # If no registry, advapi32 is only used for Perl_pp_getlogin/getlogin/GetUserNameA | |
569 | # which is rare to execute | |
570 | ifneq ($(USE_NO_REGISTRY),undef) | |
571 | DELAYLOAD = -DELAYLOAD:ws2_32.dll -DELAYLOAD:advapi32.dll delayimp.lib | |
572 | MINIDELAYLOAD = | |
573 | else | |
574 | DELAYLOAD = -DELAYLOAD:ws2_32.dll delayimp.lib | |
575 | #miniperl never does any registry lookups | |
576 | MINIDELAYLOAD = -DELAYLOAD:advapi32.dll | |
577 | endif | |
578 | endif | |
579 | ||
580 | # Visual C++ 2005 and 2008 (VC++ 8.0 and 9.0) create manifest files for EXEs and | |
581 | # DLLs. These either need copying everywhere with the binaries, or else need | |
582 | # embedding in them otherwise MSVCR80.dll or MSVCR90.dll won't be found. For | |
583 | # simplicity, embed them if they exist (and delete them afterwards so that they | |
584 | # don't get installed too). | |
585 | EMBED_EXE_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1 && \ | |
586 | if exist $@.manifest del $@.manifest | |
587 | EMBED_DLL_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2 && \ | |
588 | if exist $@.manifest del $@.manifest | |
589 | ||
590 | # Most relevant compiler-specific options fall into two groups: | |
591 | # either pre-MSVC80 or MSVC80 onwards, so define a macro for this. | |
592 | ifeq ($(CCTYPE),MSVC60) | |
593 | PREMSVC80 = define | |
594 | else ifeq ($(CCTYPE),MSVC70) | |
595 | PREMSVC80 = define | |
596 | else ifeq ($(CCTYPE),MSVC70FREE) | |
597 | PREMSVC80 = define | |
598 | else | |
599 | PREMSVC80 = undef | |
600 | endif | |
601 | ||
602 | ifneq ($(__ICC),define) | |
603 | CC = cl | |
604 | LINK32 = link | |
605 | else | |
606 | CC = icl | |
607 | LINK32 = xilink | |
608 | endif | |
609 | LIB32 = $(LINK32) -lib | |
610 | RSC = rc | |
611 | ||
612 | # | |
613 | # Options | |
614 | # | |
615 | ||
616 | INCLUDES = -I.\include -I. -I.. | |
617 | #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX | |
618 | DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT | |
619 | LOCDEFS = -DPERLDLL -DPERL_CORE | |
620 | CXX_FLAG = -TP -EHsc | |
621 | ||
622 | LIBC = msvcrt.lib | |
623 | ||
624 | ifeq ($(CFG),Debug) | |
625 | OPTIMIZE = -Od -MD -Zi -DDEBUGGING | |
626 | LINK_DBG = -debug | |
627 | else ifeq ($(CFG),DebugSymbols) | |
628 | OPTIMIZE = -Od -MD -Zi | |
629 | LINK_DBG = -debug | |
630 | else ifeq ($(CFG),DebugFull) | |
631 | LIBC = msvcrtd.lib | |
632 | OPTIMIZE = -Od -MDd -Zi -D_DEBUG -DDEBUGGING | |
633 | LINK_DBG = -debug | |
634 | else | |
635 | # -O1 yields smaller code, which turns out to be faster than -O2 on x86 and x64 | |
636 | OPTIMIZE = -O1 -MD -Zi -DNDEBUG | |
637 | # we enable debug symbols in release builds also | |
638 | LINK_DBG = -debug -opt:ref,icf | |
639 | # you may want to enable this if you want COFF symbols in the executables | |
640 | # in addition to the PDB symbols. The default Dr. Watson that ships with | |
641 | # Windows can use the the former but not latter. The free WinDbg can be | |
642 | # installed to get better stack traces from just the PDB symbols, so we | |
643 | # avoid the bloat of COFF symbols by default. | |
644 | #LINK_DBG = $(LINK_DBG) -debugtype:both | |
645 | ifneq ($(CCTYPE),MSVC60) | |
646 | # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG) | |
647 | OPTIMIZE += -GL | |
648 | LINK_DBG += -ltcg | |
649 | LIB_FLAGS = -ltcg | |
650 | endif | |
651 | endif | |
652 | ||
653 | ifeq ($(WIN64),define) | |
654 | DEFINES += -DWIN64 -DCONSERVATIVE | |
655 | OPTIMIZE += -fp:precise | |
656 | endif | |
657 | ||
658 | # For now, silence warnings from VC++ 8.0 onwards about "unsafe" CRT functions | |
659 | # and POSIX CRT function names being deprecated. | |
660 | ifeq ($(PREMSVC80),undef) | |
661 | DEFINES += -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE | |
662 | endif | |
663 | ||
664 | # In VS 2005 (VC++ 8.0) Microsoft changes time_t from 32-bit to | |
665 | # 64-bit, even in 32-bit mode. It also provides the _USE_32BIT_TIME_T | |
666 | # preprocessor option to revert back to the old functionality for | |
667 | # backward compatibility. We define this symbol here for older 32-bit | |
668 | # compilers only (which aren't using it at all) for the sole purpose | |
669 | # of getting it into $Config{ccflags}. That way if someone builds | |
670 | # Perl itself with e.g. VC6 but later installs an XS module using VC8 | |
671 | # the time_t types will still be compatible. | |
672 | ifeq ($(WIN64),undef) | |
673 | ifeq ((PREMSVC80),define) | |
674 | BUILDOPT += -D_USE_32BIT_TIME_T | |
675 | endif | |
676 | endif | |
677 | ||
678 | LIBBASEFILES = oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \ | |
679 | comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \ | |
680 | netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib version.lib \ | |
681 | odbc32.lib odbccp32.lib comctl32.lib | |
682 | ||
683 | # Avoid __intel_new_proc_init link error for libircmt. | |
684 | # libmmd is /MD equivelent, other variants exist. | |
685 | # libmmd is Intel C's math addon funcs to MS CRT, contains long doubles, C99, | |
686 | # and optimized C89 funcs | |
687 | ifeq ($(__ICC),define) | |
688 | LIBBASEFILES += libircmt.lib libmmd.lib | |
689 | endif | |
690 | ||
691 | # The 64 bit Windows Server 2003 SP1 SDK compilers link against MSVCRT.dll, which | |
692 | # doesn't include the buffer overrun verification code used by the /GS switch. | |
693 | # Since the code links against libraries that are compiled with /GS, this | |
694 | # "security cookie verification" code must be included via bufferoverflow.lib. | |
695 | ifeq ("$(WIN64) $(CCTYPE)","define SDK2003SP1") | |
696 | LIBBASEFILES += bufferoverflowU.lib | |
697 | endif | |
698 | ||
699 | LIBFILES = $(LIBBASEFILES) $(LIBC) | |
700 | ||
701 | EXTRACFLAGS = -nologo -GF -W3 | |
702 | ifeq ($(__ICC),define) | |
703 | EXTRACFLAGS += -Qstd=c99 | |
704 | endif | |
705 | ifeq ($(USE_CPLUSPLUS),define) | |
706 | EXTRACFLAGS += $(CXX_FLAG) | |
707 | endif | |
708 | CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \ | |
709 | $(PCHFLAGS) $(OPTIMIZE) | |
710 | LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \ | |
711 | -libpath:"$(INST_COREDIR)" \ | |
712 | -machine:$(PROCESSOR_ARCHITECTURE) | |
713 | LIB_FLAGS += -nologo | |
714 | OBJOUT_FLAG = -Fo | |
715 | EXEOUT_FLAG = -Fe | |
716 | LIBOUT_FLAG = /out: | |
717 | PDBOUT = -Fd$(*).pdb | |
718 | TESTPREPGCC = | |
719 | ||
720 | endif | |
721 | ||
342634f3 | 722 | CFLAGS_O = $(CFLAGS) $(BUILDOPT) |
723 | ||
b6e5775f | 724 | ifeq ($(PREMSVC80),undef) |
67c6176d | 725 | PRIV_LINK_FLAGS += "/manifestdependency:type='Win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' processorArchitecture='*' publicKeyToken='6595b64144ccf1df' language='*'" |
b6e5775f DD |
726 | else |
727 | RSC_FLAGS = -DINCLUDE_MANIFEST | |
728 | endif | |
729 | ||
730 | ||
731 | # For XP support in >= VS 2013 (VC++ 12.0), subsystem is always in Config.pm | |
732 | # LINK_FLAGS else subsystem is only needed for EXE building, not XS DLL building | |
733 | # Console vs GUI makes no difference for DLLs, so use default for cleaner | |
734 | # building cmd lines | |
735 | ||
736 | ifeq ($(CCTYPE),MSVC120) | |
737 | ifeq ($(WIN64),define) | |
738 | LINK_FLAGS += -subsystem:console,"5.02" | |
739 | else | |
740 | LINK_FLAGS += -subsystem:console,"5.01" | |
741 | endif | |
742 | ||
743 | else ifeq ($(CCTYPE),MSVC120FREE) | |
744 | ifeq ($(WIN64),define) | |
745 | LINK_FLAGS += -subsystem:console,"5.02" | |
746 | else | |
747 | LINK_FLAGS += -subsystem:console,"5.01" | |
748 | endif | |
749 | ||
750 | else ifeq ($(CCTYPE),MSVC140) | |
751 | ifeq ($(WIN64),define) | |
752 | LINK_FLAGS += -subsystem:console,"5.02" | |
753 | else | |
754 | LINK_FLAGS += -subsystem:console,"5.01" | |
755 | endif | |
756 | ||
757 | else ifeq ($(CCTYPE),MSVC140FREE) | |
758 | ifeq ($(WIN64),define) | |
759 | LINK_FLAGS += -subsystem:console,"5.02" | |
760 | else | |
761 | LINK_FLAGS += -subsystem:console,"5.01" | |
762 | endif | |
763 | ||
764 | else ifneq ($(CCTYPE),GCC) | |
765 | PRIV_LINK_FLAGS += -subsystem:console | |
766 | endif | |
767 | ||
342634f3 | 768 | BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS) |
769 | ||
770 | #################### do not edit below this line ####################### | |
771 | ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ############## | |
772 | ||
bf543eaf DD |
773 | #prevent -j from reaching EUMM/make_ext.pl/"sub makes", Win32 EUMM not parallel |
774 | #compatible yet | |
775 | unexport MAKEFLAGS | |
776 | ||
b6e5775f DD |
777 | a ?= .lib |
778 | ||
779 | .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res | |
780 | ||
342634f3 | 781 | %$(o): %.c |
b6e5775f | 782 | $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $(PDBOUT) $< |
342634f3 | 783 | |
784 | %.i: %.c | |
785 | $(CC) -c -I$(<D) $(CFLAGS_O) -E $< >$@ | |
786 | ||
787 | %.c: %.y | |
788 | $(NOOP) | |
789 | ||
790 | %.dll: %$(o) | |
791 | $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES) | |
792 | $(IMPLIB) --input-def $(*F).def --output-lib $(*F).a $@ | |
793 | ||
794 | %.res: %.rc | |
b6e5775f | 795 | ifeq ($(CCTYPE),GCC) |
342634f3 | 796 | $(RSC) --use-temp-file --include-dir=. --include-dir=.. -O COFF -D INCLUDE_MANIFEST -i $< -o $@ |
b6e5775f DD |
797 | else |
798 | $(RSC) -i.. -DINCLUDE_MANIFEST $< | |
799 | endif | |
342634f3 | 800 | |
801 | # | |
802 | # various targets | |
bf543eaf DD |
803 | |
804 | #do not put $(MINIPERL) as a dep/prereq in a rule, instead put $(HAVEMINIPERL) | |
805 | #$(MINIPERL) is not a buildable target, use "gmake mp" if you want to just build | |
806 | #miniperl alone | |
342634f3 | 807 | MINIPERL = ..\miniperl.exe |
bf543eaf | 808 | HAVEMINIPERL = ..\lib\buildcustomize.pl |
342634f3 | 809 | MINIDIR = mini |
810 | PERLEXE = ..\perl.exe | |
811 | WPERLEXE = ..\wperl.exe | |
812 | PERLEXESTATIC = ..\perl-static.exe | |
813 | STATICDIR = .\static.tmp | |
814 | GLOBEXE = ..\perlglob.exe | |
bf543eaf | 815 | CONFIGPM = ..\lib\Config.pm |
342634f3 | 816 | GENUUDMAP = ..\generate_uudmap.exe |
817 | ifeq ($(BUILD_STATIC),define) | |
818 | PERLSTATIC = static | |
819 | else | |
820 | ifeq ($(ALL_STATIC),define) | |
821 | PERLSTATIC = static | |
822 | else | |
823 | PERLSTATIC = | |
824 | endif | |
825 | endif | |
826 | ||
827 | # Unicode data files generated by mktables | |
828 | UNIDATAFILES = ..\lib\unicore\Decomposition.pl ..\lib\unicore\TestProp.pl \ | |
829 | ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \ | |
830 | ..\lib\unicore\UCD.pl ..\lib\unicore\Name.pm \ | |
831 | ..\lib\unicore\Heavy.pl ..\lib\unicore\mktables.lst | |
832 | ||
833 | # Directories of Unicode data files generated by mktables | |
834 | UNIDATADIR1 = ..\lib\unicore\To | |
835 | UNIDATADIR2 = ..\lib\unicore\lib | |
836 | ||
837 | PERLEXE_MANIFEST= .\perlexe.manifest | |
838 | PERLEXE_ICO = .\perlexe.ico | |
839 | PERLEXE_RES = .\perlexe.res | |
840 | PERLDLL_RES = | |
841 | ||
842 | # Nominate a target which causes extensions to be re-built | |
843 | # This used to be $(PERLEXE), but at worst it is the .dll that they depend | |
844 | # on and really only the interface - i.e. the .def file used to export symbols | |
845 | # from the .dll | |
bf543eaf | 846 | PERLDEP = $(PERLIMPLIB) |
342634f3 | 847 | |
848 | ||
849 | PL2BAT = bin\pl2bat.pl | |
850 | ||
851 | UTILS = \ | |
852 | ..\utils\h2ph \ | |
853 | ..\utils\splain \ | |
854 | ..\utils\perlbug \ | |
855 | ..\utils\pl2pm \ | |
856 | ..\utils\c2ph \ | |
857 | ..\utils\pstruct \ | |
858 | ..\utils\h2xs \ | |
859 | ..\utils\perldoc \ | |
860 | ..\utils\perlivp \ | |
861 | ..\utils\libnetcfg \ | |
862 | ..\utils\enc2xs \ | |
bf543eaf | 863 | ..\utils\encguess \ |
342634f3 | 864 | ..\utils\piconv \ |
865 | ..\utils\corelist \ | |
866 | ..\utils\cpan \ | |
867 | ..\utils\xsubpp \ | |
868 | ..\utils\pod2html \ | |
869 | ..\utils\prove \ | |
870 | ..\utils\ptar \ | |
871 | ..\utils\ptardiff \ | |
872 | ..\utils\ptargrep \ | |
873 | ..\utils\zipdetails \ | |
874 | ..\utils\shasum \ | |
875 | ..\utils\instmodsh \ | |
876 | ..\utils\json_pp \ | |
877 | bin\exetype.pl \ | |
878 | bin\runperl.pl \ | |
879 | bin\pl2bat.pl \ | |
880 | bin\perlglob.pl \ | |
881 | bin\search.pl | |
882 | ||
b6e5775f DD |
883 | ifeq ($(CCTYPE),GCC) |
884 | ||
342634f3 | 885 | CFGSH_TMPL = config.gc |
886 | CFGH_TMPL = config_H.gc | |
c02894f5 RS |
887 | PERLIMPLIB = $(COREDIR)\libperl525$(a) |
888 | PERLIMPLIBBASE = libperl525$(a) | |
889 | PERLSTATICLIB = ..\libperl525s$(a) | |
342634f3 | 890 | INT64 = long long |
891 | ||
b6e5775f DD |
892 | else |
893 | ||
894 | CFGSH_TMPL = config.vc | |
895 | CFGH_TMPL = config_H.vc | |
896 | INT64 = __int64 | |
897 | ||
898 | endif | |
899 | ||
342634f3 | 900 | # makedef.pl must be updated if this changes, and this should normally |
901 | # only change when there is an incompatible revision of the public API. | |
c02894f5 RS |
902 | PERLIMPLIB ?= $(COREDIR)\perl525$(a) |
903 | PERLIMPLIBBASE ?= perl525$(a) | |
904 | PERLEXPLIB ?= $(COREDIR)\perl525.exp | |
905 | PERLSTATICLIB ?= ..\perl525s$(a) | |
906 | PERLDLL = ..\perl525.dll | |
342634f3 | 907 | |
bf543eaf DD |
908 | # don't let "gmake -n all" try to run "miniperl.exe make_ext.pl" |
909 | PLMAKE = gmake | |
910 | ||
342634f3 | 911 | XCOPY = xcopy /f /r /i /d /y |
912 | RCOPY = xcopy /f /r /i /e /d /y | |
913 | NOOP = @rem | |
914 | ||
bf543eaf DD |
915 | #first ones are arrange in compile time order for faster parallel building |
916 | #see #123867 for details | |
342634f3 | 917 | MICROCORE_SRC = \ |
bf543eaf DD |
918 | ..\toke.c \ |
919 | ..\regcomp.c \ | |
920 | ..\regexec.c \ | |
921 | ..\op.c \ | |
922 | ..\sv.c \ | |
923 | ..\pp.c \ | |
924 | ..\pp_ctl.c \ | |
925 | ..\pp_sys.c \ | |
926 | ..\pp_pack.c \ | |
927 | ..\pp_hot.c \ | |
928 | ..\gv.c \ | |
929 | ..\perl.c \ | |
930 | ..\utf8.c \ | |
931 | ..\dump.c \ | |
932 | ..\hv.c \ | |
342634f3 | 933 | ..\av.c \ |
934 | ..\caretx.c \ | |
935 | ..\deb.c \ | |
936 | ..\doio.c \ | |
937 | ..\doop.c \ | |
a55c5245 | 938 | ..\dquote.c \ |
342634f3 | 939 | ..\globals.c \ |
16d5aac1 | 940 | ..\mro_core.c \ |
342634f3 | 941 | ..\locale.c \ |
942 | ..\keywords.c \ | |
943 | ..\mathoms.c \ | |
944 | ..\mg.c \ | |
945 | ..\numeric.c \ | |
342634f3 | 946 | ..\pad.c \ |
342634f3 | 947 | ..\perlapi.c \ |
948 | ..\perly.c \ | |
342634f3 | 949 | ..\pp_sort.c \ |
342634f3 | 950 | ..\reentr.c \ |
342634f3 | 951 | ..\run.c \ |
952 | ..\scope.c \ | |
342634f3 | 953 | ..\taint.c \ |
f832b29a | 954 | ..\time64.c \ |
342634f3 | 955 | ..\universal.c \ |
342634f3 | 956 | ..\util.c |
957 | ||
958 | EXTRACORE_SRC += perllib.c | |
959 | ||
960 | ifeq ($(PERL_MALLOC),define) | |
961 | EXTRACORE_SRC += ..\malloc.c | |
962 | endif | |
963 | ||
964 | EXTRACORE_SRC += ..\perlio.c | |
965 | ||
966 | WIN32_SRC = \ | |
967 | .\win32.c \ | |
968 | .\win32sck.c \ | |
969 | .\win32thread.c \ | |
970 | .\fcrypt.c | |
971 | ||
972 | # We need this for miniperl build unless we override canned | |
973 | # config.h #define building mini\* | |
974 | #ifeq ($(USE_PERLIO)" == "define" | |
975 | WIN32_SRC += .\win32io.c | |
976 | #endif | |
977 | ||
978 | CORE_NOCFG_H = \ | |
979 | ..\av.h \ | |
980 | ..\cop.h \ | |
981 | ..\cv.h \ | |
982 | ..\dosish.h \ | |
983 | ..\embed.h \ | |
984 | ..\form.h \ | |
985 | ..\gv.h \ | |
986 | ..\handy.h \ | |
987 | ..\hv.h \ | |
988 | ..\hv_func.h \ | |
989 | ..\iperlsys.h \ | |
990 | ..\mg.h \ | |
991 | ..\nostdio.h \ | |
992 | ..\op.h \ | |
993 | ..\opcode.h \ | |
994 | ..\perl.h \ | |
995 | ..\perlapi.h \ | |
996 | ..\perlsdio.h \ | |
997 | ..\perly.h \ | |
998 | ..\pp.h \ | |
999 | ..\proto.h \ | |
1000 | ..\regcomp.h \ | |
1001 | ..\regexp.h \ | |
1002 | ..\scope.h \ | |
1003 | ..\sv.h \ | |
1004 | ..\thread.h \ | |
1005 | ..\unixish.h \ | |
1006 | ..\utf8.h \ | |
1007 | ..\util.h \ | |
1008 | ..\warnings.h \ | |
1009 | ..\XSUB.h \ | |
1010 | ..\EXTERN.h \ | |
1011 | ..\perlvars.h \ | |
1012 | ..\intrpvar.h \ | |
1013 | .\include\dirent.h \ | |
1014 | .\include\netdb.h \ | |
1015 | .\include\sys\errno2.h \ | |
1016 | .\include\sys\socket.h \ | |
1017 | .\win32.h | |
1018 | ||
1019 | CORE_H = $(CORE_NOCFG_H) .\config.h ..\git_version.h | |
1020 | ||
1021 | UUDMAP_H = ..\uudmap.h | |
1022 | BITCOUNT_H = ..\bitcount.h | |
1023 | MG_DATA_H = ..\mg_data.h | |
1024 | GENERATED_HEADERS = $(UUDMAP_H) $(BITCOUNT_H) $(MG_DATA_H) | |
8657e86b TC |
1025 | |
1026 | HAVE_COREDIR = .coreheaders | |
342634f3 | 1027 | |
b6e5775f DD |
1028 | MICROCORE_OBJ = $(MICROCORE_SRC:.c=$(o)) |
1029 | CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=$(o)) | |
1030 | WIN32_OBJ = $(WIN32_SRC:.c=$(o)) | |
342634f3 | 1031 | |
1032 | MINICORE_OBJ = $(subst ..\,mini\,$(MICROCORE_OBJ)) \ | |
1033 | $(MINIDIR)\miniperlmain$(o) \ | |
1034 | $(MINIDIR)\perlio$(o) | |
1035 | MINIWIN32_OBJ = $(subst .\,mini\,$(WIN32_OBJ)) | |
1036 | MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ) | |
1037 | DLL_OBJ = $(DYNALOADER) | |
342634f3 | 1038 | |
1039 | PERLDLL_OBJ = $(CORE_OBJ) | |
1040 | PERLEXE_OBJ = perlmain$(o) | |
1041 | PERLEXEST_OBJ = perlmainst$(o) | |
1042 | ||
1043 | PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ) | |
1044 | ||
1045 | ifneq ($(USE_SETARGV),) | |
1046 | SETARGV_OBJ = setargv$(o) | |
1047 | endif | |
1048 | ||
1049 | ifeq ($(ALL_STATIC),define) | |
1050 | # some exclusions, unfortunately, until fixed: | |
1051 | # - MakeMaker isn't capable enough for SDBM_File (small bug) | |
1052 | STATIC_EXT = * !SDBM_File | |
1053 | else | |
1054 | # specify static extensions here, for example: | |
1055 | # (be sure to include Win32CORE to load Win32 on demand) | |
1056 | #STATIC_EXT = Win32CORE Cwd Compress/Raw/Zlib | |
1057 | STATIC_EXT = Win32CORE | |
1058 | endif | |
1059 | ||
1060 | DYNALOADER = ..\DynaLoader$(o) | |
1061 | ||
1062 | # vars must be separated by "\t+~\t+", since we're using the tempfile | |
1063 | # version of config_sh.pl (we were overflowing someone's buffer by | |
1064 | # trying to fit them all on the command line) | |
1065 | # -- BKS 10-17-1999 | |
1066 | CFG_VARS = \ | |
1067 | "INST_TOP=$(INST_TOP)" \ | |
1068 | "INST_VER=$(INST_VER)" \ | |
1069 | "INST_ARCH=$(INST_ARCH)" \ | |
1070 | "archname=$(ARCHNAME)" \ | |
1071 | "cc=$(CC)" \ | |
1072 | "ld=$(LINK32)" \ | |
b6e5775f | 1073 | "ccflags=$(subst ",\",$(EXTRACFLAGS) $(OPTIMIZE) $(DEFINES) $(BUILDOPT))" \ |
bf543eaf | 1074 | "usecplusplus=$(USE_CPLUSPLUS)" \ |
342634f3 | 1075 | "cf_email=$(EMAIL)" \ |
1076 | "d_mymalloc=$(PERL_MALLOC)" \ | |
1077 | "libs=$(LIBFILES)" \ | |
b6e5775f DD |
1078 | "incpath=$(subst ",\",$(CCINCDIR))" \ |
1079 | "libperl=$(subst ",\",$(PERLIMPLIBBASE))" \ | |
1080 | "libpth=$(subst ",\",$(CCLIBDIR);$(EXTRALIBDIRS))" \ | |
342634f3 | 1081 | "libc=$(LIBC)" \ |
bf543eaf | 1082 | "make=$(PLMAKE)" \ |
342634f3 | 1083 | "_o=$(o)" \ |
1084 | "obj_ext=$(o)" \ | |
1085 | "_a=$(a)" \ | |
1086 | "lib_ext=$(a)" \ | |
1087 | "static_ext=$(STATIC_EXT)" \ | |
1088 | "usethreads=$(USE_ITHREADS)" \ | |
1089 | "useithreads=$(USE_ITHREADS)" \ | |
1090 | "usemultiplicity=$(USE_MULTI)" \ | |
1091 | "useperlio=$(USE_PERLIO)" \ | |
1092 | "use64bitint=$(USE_64_BIT_INT)" \ | |
1093 | "uselongdouble=$(USE_LONG_DOUBLE)" \ | |
1094 | "uselargefiles=$(USE_LARGE_FILES)" \ | |
1095 | "usesitecustomize=$(USE_SITECUST)" \ | |
b6e5775f DD |
1096 | "LINK_FLAGS=$(subst ",\",$(LINK_FLAGS))"\ |
1097 | "optimize=$(subst ",\",$(OPTIMIZE))" \ | |
342634f3 | 1098 | "ARCHPREFIX=$(ARCHPREFIX)" \ |
1099 | "WIN64=$(WIN64)" | |
1100 | ||
1101 | # | |
1102 | # Top targets | |
1103 | # | |
1104 | ||
1105 | .PHONY: all info | |
1106 | ||
bf543eaf | 1107 | all : info rebasePE Extensions_nonxs $(PERLSTATIC) |
342634f3 | 1108 | |
1109 | info : | |
ca30c090 DD |
1110 | @echo # CCTYPE=$(CCTYPE) |
1111 | ifeq ($(CCTYPE),GCC) | |
342634f3 | 1112 | @echo # GCCBIN=$(GCCBIN) |
1113 | @echo # GCCVER=$(GCCVER1).$(GCCVER2).$(GCCVER3) | |
1114 | @echo # GCCTARGET=$(GCCTARGET) | |
1115 | @echo # GCCCROSS=$(GCCCROSS) | |
ca30c090 | 1116 | endif |
342634f3 | 1117 | @echo # WIN64=$(WIN64) |
1118 | @echo # ARCHITECTURE=$(ARCHITECTURE) | |
1119 | @echo # ARCHNAME=$(ARCHNAME) | |
bf543eaf | 1120 | @echo # MAKE=$(PLMAKE) |
ca30c090 | 1121 | ifeq ($(CCTYPE),) |
342634f3 | 1122 | @echo Unable to detect gcc and/or architecture! |
1123 | @exit 1 | |
1124 | endif | |
1125 | ||
1126 | ||
342634f3 | 1127 | ..\regcomp$(o) : ..\regnodes.h ..\regcharclass.h |
1128 | ||
1129 | ..\regexec$(o) : ..\regnodes.h ..\regcharclass.h | |
1130 | ||
bf543eaf | 1131 | reonly : ..\regnodes.h .\config.h ..\git_version.h $(GLOBEXE) $(HAVEMINIPERL)\ |
342634f3 | 1132 | $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \ |
1133 | Extensions_reonly | |
1134 | ||
1135 | static: $(PERLEXESTATIC) | |
1136 | ||
1137 | #---------------------------------------------------------------- | |
1138 | ||
bf543eaf | 1139 | $(GLOBEXE) : perlglob.c |
b6e5775f | 1140 | ifeq ($(CCTYPE),GCC) |
bf543eaf | 1141 | $(LINK32) $(OPTIMIZE) $(BLINK_FLAGS) -mconsole -o $@ perlglob.c $(LIBFILES) |
b6e5775f | 1142 | else |
8e925de9 DD |
1143 | $(CC) $(OPTIMIZE) $(PDBOUT) -Fe$@ perlglob.c -link $(BLINK_FLAGS) \ |
1144 | setargv$(o) $(LIBFILES) && $(EMBED_EXE_MANI) | |
b6e5775f | 1145 | endif |
bf543eaf DD |
1146 | |
1147 | ..\git_version.h : $(HAVEMINIPERL) ..\make_patchnum.pl | |
1148 | $(MINIPERL) -I..\lib ..\make_patchnum.pl | |
1149 | ||
1150 | # make sure that we recompile perl.c if the git version changes | |
1151 | ..\perl$(o) : ..\git_version.h | |
1152 | ||
1153 | ..\config.sh : $(CFGSH_TMPL) config_sh.PL FindExt.pm $(HAVEMINIPERL) | |
1154 | $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh | |
1155 | ||
1156 | # This target is for when changes to the main config.sh happen. | |
1157 | # Edit config.gc, then make perl using GCC in a minimal configuration (i.e. | |
1158 | # with MULTI, ITHREADS, IMP_SYS, LARGE_FILES and PERLIO off), then make | |
1159 | # this target to regenerate config_H.gc. | |
1160 | regen_config_h: | |
1161 | $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh | |
1162 | $(MINIPERL) -I..\lib ..\configpm --chdir=.. | |
1163 | -del /f $(CFGH_TMPL) | |
1164 | -$(MINIPERL) -I..\lib config_h.PL "ARCHPREFIX=$(ARCHPREFIX)" | |
1165 | rename config.h $(CFGH_TMPL) | |
1166 | ||
1167 | $(CONFIGPM): ..\config.sh config_h.PL | |
1168 | $(MINIPERL) -I..\lib ..\configpm --chdir=.. | |
1169 | -$(MINIPERL) -I..\lib config_h.PL "ARCHPREFIX=$(ARCHPREFIX)" | |
1170 | ||
1171 | .\config.h : $(CONFIGPM) | |
1172 | ||
1173 | # See the comment in Makefile.SH explaining this seemingly cranky ordering | |
1174 | ..\lib\buildcustomize.pl : $(MINI_OBJ) ..\write_buildcustomize.pl | |
b6e5775f | 1175 | ifeq ($(CCTYPE),GCC) |
bf543eaf | 1176 | $(LINK32) -mconsole -o $(MINIPERL) $(BLINK_FLAGS) $(MINI_OBJ) $(LIBFILES) |
b6e5775f DD |
1177 | else |
1178 | $(LINK32) -out:$(MINIPERL) $(BLINK_FLAGS) \ | |
1179 | $(DELAYLOAD) $(MINIDELAYLOAD) $(LIBFILES) $(MINI_OBJ) | |
1180 | $(subst $@,$(MINIPERL),$(EMBED_EXE_MANI)) | |
1181 | ||
1182 | endif | |
bf543eaf | 1183 | $(MINIPERL) -I..\lib -f ..\write_buildcustomize.pl .. |
342634f3 | 1184 | |
bf543eaf DD |
1185 | #convinence target, get a working miniperl |
1186 | mp : $(CONFIGPM) | |
342634f3 | 1187 | |
bf543eaf DD |
1188 | $(MINIDIR)\.exists : $(CFGH_TMPL) |
1189 | if not exist "$(MINIDIR)" mkdir "$(MINIDIR)" | |
342634f3 | 1190 | # |
1191 | # Copy the template config.h and set configurables at the end of it | |
1192 | # as per the options chosen and compiler used. | |
1193 | # Note: This config.h is only used to build miniperl.exe anyway, but | |
1194 | # it's as well to have its options correct to be sure that it builds | |
1195 | # and so that it's "-V" options are correct for use by makedef.pl. The | |
1196 | # real config.h used to build perl.exe is generated from the top-level | |
1197 | # config_h.SH by config_h.PL (run by miniperl.exe). | |
1198 | # | |
bf543eaf DD |
1199 | # MINIDIR generates config.h so miniperl.exe is not rebuilt when the 2nd |
1200 | # config.h is generated in CONFIGPM target, see also the comments for $(MINI_OBJ). | |
342634f3 | 1201 | copy $(CFGH_TMPL) config.h |
6f960640 DD |
1202 | @(echo.&& \ |
1203 | echo #ifndef _config_h_footer_&& \ | |
1204 | echo #define _config_h_footer_&& \ | |
1205 | echo #undef Off_t&& \ | |
1206 | echo #undef LSEEKSIZE&& \ | |
1207 | echo #undef Off_t_size&& \ | |
1208 | echo #undef PTRSIZE&& \ | |
1209 | echo #undef SSize_t&& \ | |
1210 | echo #undef HAS_ATOLL&& \ | |
1211 | echo #undef HAS_STRTOLL&& \ | |
1212 | echo #undef HAS_STRTOULL&& \ | |
1213 | echo #undef Size_t_size&& \ | |
1214 | echo #undef IVTYPE&& \ | |
1215 | echo #undef UVTYPE&& \ | |
1216 | echo #undef IVSIZE&& \ | |
1217 | echo #undef UVSIZE&& \ | |
1218 | echo #undef NV_PRESERVES_UV&& \ | |
1219 | echo #undef NV_PRESERVES_UV_BITS&& \ | |
1220 | echo #undef IVdf&& \ | |
1221 | echo #undef UVuf&& \ | |
1222 | echo #undef UVof&& \ | |
1223 | echo #undef UVxf&& \ | |
1224 | echo #undef UVXf&& \ | |
1225 | echo #undef USE_64_BIT_INT&& \ | |
1226 | echo #undef Gconvert&& \ | |
1227 | echo #undef HAS_FREXPL&& \ | |
1228 | echo #undef HAS_ISNANL&& \ | |
1229 | echo #undef HAS_MODFL&& \ | |
1230 | echo #undef HAS_MODFL_PROTO&& \ | |
1231 | echo #undef HAS_SQRTL&& \ | |
1232 | echo #undef HAS_STRTOLD&& \ | |
1233 | echo #undef PERL_PRIfldbl&& \ | |
1234 | echo #undef PERL_PRIgldbl&& \ | |
1235 | echo #undef PERL_PRIeldbl&& \ | |
1236 | echo #undef PERL_SCNfldbl&& \ | |
1237 | echo #undef NVTYPE&& \ | |
1238 | echo #undef NVSIZE&& \ | |
1239 | echo #undef LONG_DOUBLESIZE&& \ | |
1240 | echo #undef NV_OVERFLOWS_INTEGERS_AT&& \ | |
1241 | echo #undef NVef&& \ | |
1242 | echo #undef NVff&& \ | |
1243 | echo #undef NVgf&& \ | |
1244 | echo #undef USE_LONG_DOUBLE)>> config.h | |
342634f3 | 1245 | ifeq ($(USE_LARGE_FILES),define) |
6f960640 DD |
1246 | @(echo #define Off_t $(INT64)&& \ |
1247 | echo #define LSEEKSIZE ^8&& \ | |
1248 | echo #define Off_t_size ^8)>> config.h | |
342634f3 | 1249 | else |
6f960640 DD |
1250 | @(echo #define Off_t long&& \ |
1251 | echo #define LSEEKSIZE ^4&& \ | |
1252 | echo #define Off_t_size ^4)>> config.h | |
342634f3 | 1253 | endif |
1254 | ifeq ($(WIN64),define) | |
6f960640 DD |
1255 | @(echo #define PTRSIZE ^8&& \ |
1256 | echo #define SSize_t $(INT64)&& \ | |
1257 | echo #define HAS_ATOLL&& \ | |
1258 | echo #define HAS_STRTOLL&& \ | |
1259 | echo #define HAS_STRTOULL&& \ | |
1260 | echo #define Size_t_size ^8)>> config.h | |
342634f3 | 1261 | else |
6f960640 DD |
1262 | @(echo #define PTRSIZE ^4&& \ |
1263 | echo #define SSize_t int&& \ | |
1264 | echo #undef HAS_ATOLL&& \ | |
1265 | echo #undef HAS_STRTOLL&& \ | |
1266 | echo #undef HAS_STRTOULL&& \ | |
1267 | echo #define Size_t_size ^4)>> config.h | |
342634f3 | 1268 | endif |
1269 | ifeq ($(USE_64_BIT_INT),define) | |
6f960640 DD |
1270 | @(echo #define IVTYPE $(INT64)&& \ |
1271 | echo #define UVTYPE unsigned $(INT64)&& \ | |
1272 | echo #define IVSIZE ^8&& \ | |
1273 | echo #define UVSIZE ^8)>> config.h | |
342634f3 | 1274 | ifeq ($(USE_LONG_DOUBLE),define) |
6f960640 DD |
1275 | @(echo #define NV_PRESERVES_UV&& \ |
1276 | echo #define NV_PRESERVES_UV_BITS 64)>> config.h | |
342634f3 | 1277 | else |
6f960640 DD |
1278 | @(echo #undef NV_PRESERVES_UV&& \ |
1279 | echo #define NV_PRESERVES_UV_BITS 53)>> config.h | |
1280 | endif | |
1281 | @(echo #define IVdf "I64d"&& \ | |
1282 | echo #define UVuf "I64u"&& \ | |
1283 | echo #define UVof "I64o"&& \ | |
1284 | echo #define UVxf "I64x"&& \ | |
1285 | echo #define UVXf "I64X"&& \ | |
1286 | echo #define USE_64_BIT_INT)>> config.h | |
342634f3 | 1287 | else |
6f960640 DD |
1288 | @(echo #define IVTYPE long&& \ |
1289 | echo #define UVTYPE unsigned long&& \ | |
1290 | echo #define IVSIZE ^4&& \ | |
1291 | echo #define UVSIZE ^4&& \ | |
1292 | echo #define NV_PRESERVES_UV&& \ | |
1293 | echo #define NV_PRESERVES_UV_BITS 32&& \ | |
1294 | echo #define IVdf "ld"&& \ | |
1295 | echo #define UVuf "lu"&& \ | |
1296 | echo #define UVof "lo"&& \ | |
1297 | echo #define UVxf "lx"&& \ | |
1298 | echo #define UVXf "lX"&& \ | |
1299 | echo #undef USE_64_BIT_INT)>> config.h | |
342634f3 | 1300 | endif |
1301 | ifeq ($(USE_LONG_DOUBLE),define) | |
6f960640 DD |
1302 | @(echo #define Gconvert^(x,n,t,b^) sprintf^(^(b^),"%%.*""Lg",^(n^),^(x^)^)&& \ |
1303 | echo #define HAS_FREXPL&& \ | |
1304 | echo #define HAS_ISNANL&& \ | |
1305 | echo #define HAS_MODFL&& \ | |
1306 | echo #define HAS_MODFL_PROTO&& \ | |
1307 | echo #define HAS_SQRTL&& \ | |
1308 | echo #define HAS_STRTOLD&& \ | |
1309 | echo #define PERL_PRIfldbl "Lf"&& \ | |
1310 | echo #define PERL_PRIgldbl "Lg"&& \ | |
1311 | echo #define PERL_PRIeldbl "Le"&& \ | |
1312 | echo #define PERL_SCNfldbl "Lf"&& \ | |
1313 | echo #define NVTYPE long double)>> config.h | |
342634f3 | 1314 | ifeq ($(WIN64),define) |
6f960640 DD |
1315 | @(echo #define NVSIZE ^16&& \ |
1316 | echo #define LONG_DOUBLESIZE ^16)>> config.h | |
342634f3 | 1317 | else |
6f960640 DD |
1318 | @(echo #define NVSIZE ^12&& \ |
1319 | echo #define LONG_DOUBLESIZE ^12)>> config.h | |
1320 | endif | |
1321 | @(echo #define NV_OVERFLOWS_INTEGERS_AT 256.0*256.0*256.0*256.0*256.0*256.0*256.0*2.0*2.0*2.0*2.0*2.0*2.0*2.0*2.0&& \ | |
1322 | echo #define NVef "Le"&& \ | |
1323 | echo #define NVff "Lf"&& \ | |
1324 | echo #define NVgf "Lg"&& \ | |
1325 | echo #define USE_LONG_DOUBLE)>> config.h | |
342634f3 | 1326 | else |
6f960640 DD |
1327 | @(echo #define Gconvert^(x,n,t,b^) sprintf^(^(b^),"%%.*g",^(n^),^(x^)^)&& \ |
1328 | echo #undef HAS_FREXPL&& \ | |
1329 | echo #undef HAS_ISNANL&& \ | |
1330 | echo #undef HAS_MODFL&& \ | |
1331 | echo #undef HAS_MODFL_PROTO&& \ | |
1332 | echo #undef HAS_SQRTL&& \ | |
1333 | echo #undef HAS_STRTOLD&& \ | |
1334 | echo #undef PERL_PRIfldbl&& \ | |
1335 | echo #undef PERL_PRIgldbl&& \ | |
1336 | echo #undef PERL_PRIeldbl&& \ | |
1337 | echo #undef PERL_SCNfldbl&& \ | |
1338 | echo #define NVTYPE double&& \ | |
1339 | echo #define NVSIZE ^8&& \ | |
1340 | echo #define LONG_DOUBLESIZE ^8&& \ | |
1341 | echo #define NV_OVERFLOWS_INTEGERS_AT 256.0*256.0*256.0*256.0*256.0*256.0*2.0*2.0*2.0*2.0*2.0&& \ | |
1342 | echo #define NVef "e"&& \ | |
1343 | echo #define NVff "f"&& \ | |
1344 | echo #define NVgf "g"&& \ | |
1345 | echo #undef USE_LONG_DOUBLE)>> config.h | |
1346 | endif | |
1347 | ifeq ($(USE_CPLUSPLUS),define) | |
1348 | @(echo #define USE_CPLUSPLUS&& \ | |
1349 | echo #endif)>> config.h | |
1350 | else | |
1351 | @(echo #undef USE_CPLUSPLUS&& \ | |
1352 | echo #endif)>> config.h | |
1353 | endif | |
bf543eaf DD |
1354 | #separate line since this is sentinal that this target is done |
1355 | rem. > $(MINIDIR)\.exists | |
342634f3 | 1356 | |
1357 | $(MINICORE_OBJ) : $(CORE_NOCFG_H) | |
bf543eaf | 1358 | $(CC) -c $(CFLAGS) $(MINIBUILDOPT) -DPERL_EXTERNAL_GLOB -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ $(PDBOUT) ..\$(*F).c |
342634f3 | 1359 | |
1360 | $(MINIWIN32_OBJ) : $(CORE_NOCFG_H) | |
bf543eaf | 1361 | $(CC) -c $(CFLAGS) $(MINIBUILDOPT) -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ $(PDBOUT) $(*F).c |
342634f3 | 1362 | |
1363 | # -DPERL_IMPLICIT_SYS needs C++ for perllib.c | |
1364 | # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless | |
bf543eaf | 1365 | # unless the .IF is true), so instead we use a .ELSE with the default. |
342634f3 | 1366 | # This is the only file that depends on perlhost.h, vmem.h, and vdir.h |
1367 | ||
bf543eaf | 1368 | perllib$(o) : perllib.c perllibst.h .\perlhost.h .\vdir.h .\vmem.h |
342634f3 | 1369 | ifeq ($(USE_IMP_SYS),define) |
bf543eaf | 1370 | $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ $(PDBOUT) perllib.c |
342634f3 | 1371 | else |
bf543eaf | 1372 | $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ $(PDBOUT) perllib.c |
342634f3 | 1373 | endif |
1374 | ||
1375 | # 1. we don't want to rebuild miniperl.exe when config.h changes | |
1376 | # 2. we don't want to rebuild miniperl.exe with non-default config.h | |
1377 | # 3. we can't have miniperl.exe depend on git_version.h, as miniperl creates it | |
bf543eaf | 1378 | $(MINI_OBJ) : $(MINIDIR)\.exists $(CORE_NOCFG_H) |
342634f3 | 1379 | |
1380 | $(WIN32_OBJ) : $(CORE_H) | |
1381 | ||
1382 | $(CORE_OBJ) : $(CORE_H) | |
1383 | ||
1384 | $(DLL_OBJ) : $(CORE_H) | |
1385 | ||
bf543eaf DD |
1386 | |
1387 | perllibst.h : $(HAVEMINIPERL) $(CONFIGPM) create_perllibst_h.pl | |
342634f3 | 1388 | $(MINIPERL) -I..\lib create_perllibst_h.pl |
bf543eaf DD |
1389 | |
1390 | perldll.def : $(HAVEMINIPERL) $(CONFIGPM) ..\embed.fnc ..\makedef.pl | |
342634f3 | 1391 | $(MINIPERL) -I..\lib -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \ |
b6e5775f | 1392 | $(BUILDOPT) CCTYPE=$(CCTYPE) TARG_DIR=..\ > perldll.def |
342634f3 | 1393 | |
bf543eaf DD |
1394 | $(PERLEXPLIB) : $(PERLIMPLIB) |
1395 | ||
1396 | $(PERLIMPLIB) : perldll.def | |
b6e5775f | 1397 | ifeq ($(CCTYPE),GCC) |
bf543eaf | 1398 | $(IMPLIB) -k -d perldll.def -l $(PERLIMPLIB) -e $(PERLEXPLIB) |
b6e5775f DD |
1399 | else |
1400 | lib -def:perldll.def -machine:$(ARCHITECTURE) /OUT:$(PERLIMPLIB) | |
1401 | endif | |
bf543eaf DD |
1402 | |
1403 | $(PERLDLL): $(PERLEXPLIB) $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static | |
b6e5775f | 1404 | ifeq ($(CCTYPE),GCC) |
342634f3 | 1405 | $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \ |
bf543eaf | 1406 | $(PERLDLL_OBJ) $(shell type Extensions_static) $(LIBFILES) $(PERLEXPLIB) |
b6e5775f DD |
1407 | else |
1408 | $(LINK32) -dll -out:$@ $(BLINK_FLAGS) \ | |
1409 | @Extensions_static \ | |
1410 | -base:0x28000000 $(DELAYLOAD) $(LIBFILES) \ | |
1411 | $(PERLDLL_RES) $(PERLDLL_OBJ) $(PERLEXPLIB) | |
1412 | $(EMBED_DLL_MANI) | |
1413 | endif | |
342634f3 | 1414 | |
1415 | $(PERLSTATICLIB): $(PERLDLL_OBJ) Extensions_static | |
b6e5775f | 1416 | ifeq ($(CCTYPE),GCC) |
342634f3 | 1417 | $(LIB32) $(LIB_FLAGS) $@ $(PERLDLL_OBJ) |
1418 | if exist $(STATICDIR) rmdir /s /q $(STATICDIR) | |
1419 | for %%i in ($(shell type Extensions_static)) do \ | |
1420 | @mkdir $(STATICDIR) && cd $(STATICDIR) && \ | |
1421 | $(ARCHPREFIX)ar x ..\%%i && \ | |
1422 | $(ARCHPREFIX)ar q ..\$@ *$(o) && \ | |
1423 | cd .. && rmdir /s /q $(STATICDIR) | |
b6e5775f DD |
1424 | else |
1425 | $(LIB32) $(LIB_FLAGS) -out:$@ @Extensions_static \ | |
1426 | $(PERLDLL_OBJ) | |
1427 | endif | |
342634f3 | 1428 | $(XCOPY) $(PERLSTATICLIB) $(COREDIR) |
1429 | ||
1430 | $(PERLEXE_RES): perlexe.rc $(PERLEXE_MANIFEST) $(PERLEXE_ICO) | |
1431 | ||
1432 | $(MINIDIR)\globals$(o) : $(GENERATED_HEADERS) | |
1433 | ||
1434 | $(UUDMAP_H) $(MG_DATA_H) : $(BITCOUNT_H) | |
1435 | ||
1436 | $(BITCOUNT_H) : $(GENUUDMAP) | |
1437 | $(GENUUDMAP) $(GENERATED_HEADERS) | |
1438 | ||
bf543eaf | 1439 | $(GENUUDMAP) : ..\mg_raw.h |
b6e5775f | 1440 | ifeq ($(CCTYPE),GCC) |
bf543eaf DD |
1441 | $(LINK32) $(CFLAGS_O) -o..\generate_uudmap.exe ..\generate_uudmap.c \ |
1442 | $(BLINK_FLAGS) $(LIBFILES) | |
b6e5775f | 1443 | else |
8e925de9 | 1444 | $(CC) $(CFLAGS_O) $(PDBOUT) -Fe..\generate_uudmap.exe ..\generate_uudmap.c -link $(LIBFILES) $(BLINK_FLAGS) |
b6e5775f DD |
1445 | $(EMBED_EXE_MANI) |
1446 | endif | |
342634f3 | 1447 | |
8657e86b TC |
1448 | .PHONY: MakePPPort |
1449 | ||
1450 | MakePPPort : $(HAVEMINIPERL) $(CONFIGPM) | |
1451 | $(MINIPERL) -I..\lib ..\mkppport | |
1452 | ||
1453 | # also known as $(HAVE_COREDIR) | |
1454 | .coreheaders : $(CORE_H) | |
bf543eaf DD |
1455 | $(XCOPY) *.h $(COREDIR)\\*.* |
1456 | $(RCOPY) include $(COREDIR)\\*.* | |
1457 | $(XCOPY) ..\\*.h $(COREDIR)\\*.* | |
1458 | rem. > $@ | |
342634f3 | 1459 | |
bf543eaf DD |
1460 | perlmain$(o) : runperl.c $(CONFIGPM) |
1461 | $(CC) $(subst -DPERLDLL,-UPERLDLL,$(CFLAGS_O)) $(OBJOUT_FLAG)$@ $(PDBOUT) -c runperl.c | |
342634f3 | 1462 | |
bf543eaf DD |
1463 | perlmainst$(o) : runperl.c $(CONFIGPM) |
1464 | $(CC) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $(PDBOUT) -c runperl.c | |
342634f3 | 1465 | |
bf543eaf | 1466 | $(PERLEXE): $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES) $(PERLIMPLIB) |
b6e5775f | 1467 | ifeq ($(CCTYPE),GCC) |
342634f3 | 1468 | $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \ |
1469 | $(PERLEXE_OBJ) $(PERLEXE_RES) $(PERLIMPLIB) $(LIBFILES) | |
b6e5775f DD |
1470 | else |
1471 | $(LINK32) -out:$@ $(BLINK_FLAGS) \ | |
1472 | $(PERLEXE_OBJ) $(PERLEXE_RES) $(PERLIMPLIB) $(LIBFILES) $(SETARGV_OBJ) | |
1473 | $(EMBED_EXE_MANI) | |
1474 | endif | |
342634f3 | 1475 | copy $(PERLEXE) $(WPERLEXE) |
1476 | $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS | |
1477 | ||
1478 | $(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES) | |
b6e5775f | 1479 | ifeq ($(CCTYPE),GCC) |
342634f3 | 1480 | $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \ |
1481 | $(PERLEXEST_OBJ) $(PERLEXE_RES) $(PERLSTATICLIB) $(LIBFILES) | |
b6e5775f DD |
1482 | else |
1483 | $(LINK32) -out:$@ $(BLINK_FLAGS) \ | |
1484 | $(PERLEXEST_OBJ) $(PERLEXE_RES) $(PERLSTATICLIB) $(LIBFILES) $(SETARGV_OBJ) | |
1485 | $(EMBED_EXE_MANI) | |
1486 | endif | |
342634f3 | 1487 | |
342634f3 | 1488 | #------------------------------------------------------------------------------- |
1489 | # There's no direct way to mark a dependency on | |
1490 | # DynaLoader.pm, so this will have to do | |
342634f3 | 1491 | |
bf543eaf | 1492 | #most of deps of this target are in DYNALOADER and therefore omitted here |
8657e86b | 1493 | Extensions : $(PERLDEP) $(DYNALOADER) $(GLOBEXE) MakePPPort |
bf543eaf DD |
1494 | $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic !Unicode/Normalize |
1495 | ||
1496 | Extensions_normalize : $(PERLDEP) $(DYNALOADER) $(GLOBEXE) $(UNIDATAFILES) | |
1497 | $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic +Unicode/Normalize | |
1498 | ||
1499 | Extensions_reonly : $(PERLDEP) $(DYNALOADER) | |
1500 | $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic +re | |
342634f3 | 1501 | |
8657e86b | 1502 | Extensions_static : ..\make_ext.pl list_static_libs.pl $(CONFIGPM) $(GLOBEXE) $(HAVE_COREDIR) MakePPPort |
bf543eaf | 1503 | $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --static |
342634f3 | 1504 | $(MINIPERL) -I..\lib list_static_libs.pl > Extensions_static |
1505 | ||
bf543eaf DD |
1506 | Extensions_nonxs : ..\make_ext.pl ..\pod\perlfunc.pod $(CONFIGPM) $(GLOBEXE) |
1507 | $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --nonxs !libs | |
342634f3 | 1508 | |
bf543eaf DD |
1509 | #lib must be built, it can't be buildcustomize.pl-ed, and is required for XS building |
1510 | $(DYNALOADER) : ..\make_ext.pl $(CONFIGPM) $(HAVE_COREDIR) | |
1511 | $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(EXTDIR) --dir=$(DISTDIR) --dynaloader lib | |
342634f3 | 1512 | |
1513 | Extensions_clean : | |
bf543eaf | 1514 | -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=clean |
342634f3 | 1515 | |
1516 | Extensions_realclean : | |
bf543eaf DD |
1517 | -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=realclean |
1518 | ||
1519 | # all PE files need to be built by the time this target runs, PP files can still | |
1520 | # be running in parallel like UNIDATAFILES, this target a placeholder for the | |
1521 | # future | |
1522 | ifeq ($(BUILD_STATIC),define) | |
1523 | rebasePE : Extensions $(PERLDLL) Extensions_normalize $(PERLEXE) $(PERLEXESTATIC) | |
1524 | else | |
1525 | rebasePE : Extensions $(PERLDLL) Extensions_normalize $(PERLEXE) | |
1526 | endif | |
1527 | $(NOOP) | |
342634f3 | 1528 | |
1529 | #------------------------------------------------------------------------------- | |
1530 | ||
bf543eaf | 1531 | doc: $(PERLEXE) $(PERLDLL) ..\pod\perltoc.pod |
342634f3 | 1532 | $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \ |
1533 | --podpath=pod:lib:utils --htmlroot="file://$(subst :,|,$(INST_HTML))"\ | |
1534 | --recurse | |
1535 | ||
1536 | ..\utils\Makefile: $(CONFIGPM) ..\utils\Makefile.PL | |
1537 | $(MINIPERL) -I..\lib ..\utils\Makefile.PL .. | |
1538 | ||
1539 | # Note that this next section is parsed (and regenerated) by pod/buildtoc | |
1540 | # so please check that script before making structural changes here | |
bf543eaf DD |
1541 | utils: $(HAVEMINIPERL) ..\utils\Makefile |
1542 | cd ..\utils && $(PLMAKE) PERL=$(MINIPERL) | |
342634f3 | 1543 | copy ..\README.aix ..\pod\perlaix.pod |
1544 | copy ..\README.amiga ..\pod\perlamiga.pod | |
1545 | copy ..\README.android ..\pod\perlandroid.pod | |
1546 | copy ..\README.bs2000 ..\pod\perlbs2000.pod | |
1547 | copy ..\README.ce ..\pod\perlce.pod | |
1548 | copy ..\README.cn ..\pod\perlcn.pod | |
1549 | copy ..\README.cygwin ..\pod\perlcygwin.pod | |
1550 | copy ..\README.dos ..\pod\perldos.pod | |
1551 | copy ..\README.freebsd ..\pod\perlfreebsd.pod | |
1552 | copy ..\README.haiku ..\pod\perlhaiku.pod | |
1553 | copy ..\README.hpux ..\pod\perlhpux.pod | |
1554 | copy ..\README.hurd ..\pod\perlhurd.pod | |
1555 | copy ..\README.irix ..\pod\perlirix.pod | |
1556 | copy ..\README.jp ..\pod\perljp.pod | |
1557 | copy ..\README.ko ..\pod\perlko.pod | |
1558 | copy ..\README.linux ..\pod\perllinux.pod | |
1559 | copy ..\README.macos ..\pod\perlmacos.pod | |
1560 | copy ..\README.macosx ..\pod\perlmacosx.pod | |
1561 | copy ..\README.netware ..\pod\perlnetware.pod | |
1562 | copy ..\README.openbsd ..\pod\perlopenbsd.pod | |
1563 | copy ..\README.os2 ..\pod\perlos2.pod | |
1564 | copy ..\README.os390 ..\pod\perlos390.pod | |
1565 | copy ..\README.os400 ..\pod\perlos400.pod | |
1566 | copy ..\README.plan9 ..\pod\perlplan9.pod | |
1567 | copy ..\README.qnx ..\pod\perlqnx.pod | |
1568 | copy ..\README.riscos ..\pod\perlriscos.pod | |
1569 | copy ..\README.solaris ..\pod\perlsolaris.pod | |
1570 | copy ..\README.symbian ..\pod\perlsymbian.pod | |
1571 | copy ..\README.synology ..\pod\perlsynology.pod | |
1572 | copy ..\README.tru64 ..\pod\perltru64.pod | |
1573 | copy ..\README.tw ..\pod\perltw.pod | |
1574 | copy ..\README.vos ..\pod\perlvos.pod | |
1575 | copy ..\README.win32 ..\pod\perlwin32.pod | |
a09f502b | 1576 | copy ..\pod\perldelta.pod ..\pod\perl5257delta.pod |
bf543eaf | 1577 | $(MINIPERL) -I..\lib $(PL2BAT) $(UTILS) |
342634f3 | 1578 | $(MINIPERL) -I..\lib ..\autodoc.pl .. |
1579 | $(MINIPERL) -I..\lib ..\pod\perlmodlib.PL -q .. | |
1580 | ||
bf543eaf | 1581 | ..\pod\perltoc.pod: $(PERLEXE) $(PERLDLL) Extensions Extensions_nonxs Extensions_normalize utils |
342634f3 | 1582 | $(PERLEXE) -f ..\pod\buildtoc -q |
1583 | ||
1584 | # Note that the pod cleanup in this next section is parsed (and regenerated | |
1585 | # by pod/buildtoc so please check that script before making changes here | |
1586 | ||
1587 | distclean: realclean | |
1588 | -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \ | |
1589 | $(PERLIMPLIB) ..\miniperl$(a) $(PERLEXESTATIC) $(PERLSTATICLIB) | |
1590 | -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm | |
1591 | -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm | |
1592 | -del /f $(LIBDIR)\.exists $(LIBDIR)\attributes.pm $(LIBDIR)\DynaLoader.pm | |
1593 | -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm | |
1594 | -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm | |
1595 | -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm | |
1596 | -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm | |
1597 | -del /f $(LIBDIR)\File\Glob.pm | |
1598 | -del /f $(LIBDIR)\Storable.pm | |
1599 | -del /f $(LIBDIR)\Sys\Hostname.pm | |
1600 | -del /f $(LIBDIR)\Time\HiRes.pm | |
1601 | -del /f $(LIBDIR)\Unicode\Normalize.pm | |
1602 | -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm | |
1603 | -del /f $(LIBDIR)\Win32.pm | |
1604 | -del /f $(LIBDIR)\Win32CORE.pm | |
1605 | -del /f $(LIBDIR)\Win32API\File.pm | |
1606 | -del /f $(LIBDIR)\Win32API\File\cFile.pc | |
1607 | -del /f $(LIBDIR)\buildcustomize.pl | |
1608 | -del /f $(DISTDIR)\XSLoader\XSLoader.pm | |
1609 | -del /f *.def *.map | |
1610 | -if exist $(LIBDIR)\App rmdir /s /q $(LIBDIR)\App | |
1611 | -if exist $(LIBDIR)\Archive rmdir /s /q $(LIBDIR)\Archive | |
1612 | -if exist $(LIBDIR)\Attribute rmdir /s /q $(LIBDIR)\Attribute | |
1613 | -if exist $(LIBDIR)\autodie rmdir /s /q $(LIBDIR)\autodie | |
1614 | -if exist $(LIBDIR)\Carp rmdir /s /q $(LIBDIR)\Carp | |
1615 | -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress | |
1616 | -if exist $(LIBDIR)\Config\Perl rmdir /s /q $(LIBDIR)\Config\Perl | |
1617 | -if exist $(LIBDIR)\CPAN rmdir /s /q $(LIBDIR)\CPAN | |
1618 | -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data | |
1619 | -if exist $(LIBDIR)\Devel rmdir /s /q $(LIBDIR)\Devel | |
1620 | -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest | |
1621 | -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode | |
1622 | -if exist $(LIBDIR)\encoding rmdir /s /q $(LIBDIR)\encoding | |
1623 | -if exist $(LIBDIR)\Exporter rmdir /s /q $(LIBDIR)\Exporter | |
1624 | -if exist $(LIBDIR)\ExtUtils\CBuilder rmdir /s /q $(LIBDIR)\ExtUtils\CBuilder | |
1625 | -if exist $(LIBDIR)\ExtUtils\Command rmdir /s /q $(LIBDIR)\ExtUtils\Command | |
1626 | -if exist $(LIBDIR)\ExtUtils\Constant rmdir /s /q $(LIBDIR)\ExtUtils\Constant | |
1627 | -if exist $(LIBDIR)\ExtUtils\Liblist rmdir /s /q $(LIBDIR)\ExtUtils\Liblist | |
1628 | -if exist $(LIBDIR)\ExtUtils\MakeMaker rmdir /s /q $(LIBDIR)\ExtUtils\MakeMaker | |
1629 | -if exist $(LIBDIR)\ExtUtils\ParseXS rmdir /s /q $(LIBDIR)\ExtUtils\ParseXS | |
1630 | -if exist $(LIBDIR)\ExtUtils\Typemaps rmdir /s /q $(LIBDIR)\ExtUtils\Typemaps | |
1631 | -if exist $(LIBDIR)\File\Spec rmdir /s /q $(LIBDIR)\File\Spec | |
1632 | -if exist $(LIBDIR)\Filter rmdir /s /q $(LIBDIR)\Filter | |
1633 | -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash | |
1634 | -if exist $(LIBDIR)\HTTP rmdir /s /q $(LIBDIR)\HTTP | |
1635 | -if exist $(LIBDIR)\I18N rmdir /s /q $(LIBDIR)\I18N | |
df61f5a9 | 1636 | -if exist $(LIBDIR)\inc rmdir /s /q $(LIBDIR)\inc |
342634f3 | 1637 | -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO |
1638 | -if exist $(LIBDIR)\IPC rmdir /s /q $(LIBDIR)\IPC | |
1639 | -if exist $(LIBDIR)\JSON rmdir /s /q $(LIBDIR)\JSON | |
1640 | -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List | |
1641 | -if exist $(LIBDIR)\Locale rmdir /s /q $(LIBDIR)\Locale | |
1642 | -if exist $(LIBDIR)\Math rmdir /s /q $(LIBDIR)\Math | |
1643 | -if exist $(LIBDIR)\Memoize rmdir /s /q $(LIBDIR)\Memoize | |
1644 | -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME | |
1645 | -if exist $(LIBDIR)\Module rmdir /s /q $(LIBDIR)\Module | |
1646 | -if exist $(LIBDIR)\Net\FTP rmdir /s /q $(LIBDIR)\Net\FTP | |
1647 | -if exist $(LIBDIR)\Params rmdir /s /q $(LIBDIR)\Params | |
1648 | -if exist $(LIBDIR)\Parse rmdir /s /q $(LIBDIR)\Parse | |
1649 | -if exist $(LIBDIR)\Perl rmdir /s /q $(LIBDIR)\Perl | |
1650 | -if exist $(LIBDIR)\PerlIO rmdir /s /q $(LIBDIR)\PerlIO | |
1651 | -if exist $(LIBDIR)\Pod\Perldoc rmdir /s /q $(LIBDIR)\Pod\Perldoc | |
1652 | -if exist $(LIBDIR)\Pod\Simple rmdir /s /q $(LIBDIR)\Pod\Simple | |
1653 | -if exist $(LIBDIR)\Pod\Text rmdir /s /q $(LIBDIR)\Pod\Text | |
1654 | -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar | |
1655 | -if exist $(LIBDIR)\Search rmdir /s /q $(LIBDIR)\Search | |
1656 | -if exist $(LIBDIR)\Sub rmdir /s /q $(LIBDIR)\Sub | |
1657 | -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys | |
1658 | -if exist $(LIBDIR)\TAP rmdir /s /q $(LIBDIR)\TAP | |
1659 | -if exist $(LIBDIR)\Term rmdir /s /q $(LIBDIR)\Term | |
1660 | -if exist $(LIBDIR)\Test rmdir /s /q $(LIBDIR)\Test | |
ec35cd4c | 1661 | -if exist $(LIBDIR)\Test2 rmdir /s /q $(LIBDIR)\Test |
342634f3 | 1662 | -if exist $(LIBDIR)\Text rmdir /s /q $(LIBDIR)\Text |
1663 | -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread | |
1664 | -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads | |
1665 | -if exist $(LIBDIR)\Tie\Hash rmdir /s /q $(LIBDIR)\Tie\Hash | |
1666 | -if exist $(LIBDIR)\Unicode\Collate rmdir /s /q $(LIBDIR)\Unicode\Collate | |
1667 | -if exist $(LIBDIR)\Unicode\Collate\Locale rmdir /s /q $(LIBDIR)\Unicode\Collate\Locale | |
1668 | -if exist $(LIBDIR)\version rmdir /s /q $(LIBDIR)\version | |
1669 | -if exist $(LIBDIR)\VMS rmdir /s /q $(LIBDIR)\VMS | |
1670 | -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API | |
1671 | -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS | |
1672 | -cd $(PODDIR) && del /f *.html *.bat roffitall \ | |
a09f502b | 1673 | perl5257delta.pod perlaix.pod perlamiga.pod perlandroid.pod \ |
342634f3 | 1674 | perlapi.pod perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \ |
1675 | perldos.pod perlfreebsd.pod perlhaiku.pod perlhpux.pod \ | |
1676 | perlhurd.pod perlintern.pod perlirix.pod perljp.pod perlko.pod \ | |
1677 | perllinux.pod perlmacos.pod perlmacosx.pod perlmodlib.pod \ | |
1678 | perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \ | |
1679 | perlos400.pod perlplan9.pod perlqnx.pod perlriscos.pod \ | |
1680 | perlsolaris.pod perlsymbian.pod perlsynology.pod perltoc.pod \ | |
1681 | perltru64.pod perltw.pod perluniprops.pod perlvos.pod \ | |
1682 | perlwin32.pod | |
1683 | -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \ | |
bf543eaf | 1684 | perldoc perlivp libnetcfg enc2xs encguess piconv cpan *.bat \ |
342634f3 | 1685 | xsubpp pod2html instmodsh json_pp prove ptar ptardiff ptargrep shasum corelist zipdetails |
1686 | -del /f ..\config.sh perlmain.c dlutils.c config.h.new \ | |
1687 | perlmainst.c | |
1688 | -del /f $(CONFIGPM) | |
1689 | -del /f ..\lib\Config_git.pl | |
1690 | -del /f "bin\*.bat" | |
1691 | -del /f perllibst.h | |
1692 | -del /f $(PERLEXE_RES) perl.base | |
1693 | -cd .. && del /s *$(a) *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib ppport.h | |
1694 | -cd $(EXTDIR) && del /s *.def Makefile Makefile.old | |
1695 | -cd $(DISTDIR) && del /s *.def Makefile Makefile.old | |
1696 | -cd $(CPANDIR) && del /s *.def Makefile Makefile.old | |
1697 | -del /s ..\utils\Makefile | |
1698 | -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) | |
1699 | -if exist $(COREDIR) rmdir /s /q $(COREDIR) | |
1700 | -if exist pod2htmd.tmp del pod2htmd.tmp | |
1701 | -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR) | |
1702 | -del /f ..\t\test_state | |
1703 | ||
1704 | install : all installbare installhtml | |
1705 | ||
1706 | installbare : utils ..\pod\perltoc.pod | |
1707 | $(PERLEXE) ..\installperl | |
1708 | if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\$(NULL) | |
1709 | if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\$(NULL) | |
1710 | $(XCOPY) $(GLOBEXE) $(INST_BIN)\$(NULL) | |
1711 | if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\$(NULL) | |
1712 | $(XCOPY) "bin\*.bat" $(INST_SCRIPT)\$(NULL) | |
1713 | ||
1714 | installhtml : doc | |
1715 | $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\$(NULL) | |
1716 | ||
1717 | inst_lib : $(CONFIGPM) | |
1718 | $(RCOPY) ..\lib $(INST_LIB)\$(NULL) | |
1719 | ||
bf543eaf DD |
1720 | $(UNIDATAFILES) : ..\pod\perluniprops.pod |
1721 | ||
1722 | ..\pod\perluniprops.pod: ..\lib\unicore\mktables $(CONFIGPM) | |
1723 | $(MINIPERL) -I..\lib ..\lib\unicore\mktables -C ..\lib\unicore -P ..\pod -maketest -makelist -p | |
342634f3 | 1724 | |
bf543eaf | 1725 | minitest : $(HAVEMINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils |
342634f3 | 1726 | $(XCOPY) $(MINIPERL) ..\t\$(NULL) |
1727 | if exist ..\t\perl.exe del /f ..\t\perl.exe | |
1728 | rename ..\t\miniperl.exe perl.exe | |
1729 | $(XCOPY) $(GLOBEXE) ..\t\$(NULL) | |
1730 | attrib -r "..\t\*.*" | |
1731 | cd ..\t && \ | |
1732 | $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t opbasic/*.t op/*.t pragma/*.t | |
1733 | ||
b6e5775f | 1734 | test-prep : all utils ..\pod\perltoc.pod $(TESTPREPGCC) |
342634f3 | 1735 | $(XCOPY) $(PERLEXE) ..\t\$(NULL) |
1736 | $(XCOPY) $(PERLDLL) ..\t\$(NULL) | |
1737 | $(XCOPY) $(GLOBEXE) ..\t\$(NULL) | |
1738 | # If building with gcc versions 4.x.x or greater, then | |
1739 | # the GCC helper DLL will also need copied to the test directory. | |
1740 | # The name of the dll can change, depending upon which vendor has supplied | |
1741 | # your compiler, and upon the values of "x". | |
1742 | # libstdc++-6.dll is copied if it exists as it, too, may then be needed. | |
1743 | # Without this copying, the op/taint.t test script will fail. | |
b6e5775f DD |
1744 | |
1745 | ifeq ($(CCTYPE),GCC) | |
1746 | ||
1747 | test-prep-gcc : | |
342634f3 | 1748 | if exist $(CCDLLDIR)\libgcc_s_seh-1.dll $(XCOPY) $(CCDLLDIR)\libgcc_s_seh-1.dll ..\t\$(NULL) |
1749 | if exist $(CCDLLDIR)\libgcc_s_sjlj-1.dll $(XCOPY) $(CCDLLDIR)\libgcc_s_sjlj-1.dll ..\t\$(NULL) | |
1750 | if exist $(CCDLLDIR)\libgcc_s_dw2-1.dll $(XCOPY) $(CCDLLDIR)\libgcc_s_dw2-1.dll ..\t\$(NULL) | |
1751 | if exist $(CCDLLDIR)\libstdc++-6.dll $(XCOPY) $(CCDLLDIR)\libstdc++-6.dll ..\t\$(NULL) | |
1752 | if exist $(CCDLLDIR)\libwinpthread-1.dll $(XCOPY) $(CCDLLDIR)\libwinpthread-1.dll ..\t\$(NULL) | |
1753 | ||
b6e5775f DD |
1754 | endif |
1755 | ||
342634f3 | 1756 | test : test-prep |
1757 | set PERL_STATIC_EXT=$(STATIC_EXT) && \ | |
b6e5775f | 1758 | cd ..\t && perl.exe harness $(TEST_SWITCHES) $(TEST_FILES) |
342634f3 | 1759 | |
1760 | test_porting : test-prep | |
1761 | set PERL_STATIC_EXT=$(STATIC_EXT) && \ | |
b6e5775f | 1762 | cd ..\t && perl.exe harness $(TEST_SWITCHES) porting\*.t ..\lib\diagnostics.t |
342634f3 | 1763 | |
1764 | test-reonly : reonly utils | |
1765 | $(XCOPY) $(PERLEXE) ..\t\$(NULL) | |
1766 | $(XCOPY) $(PERLDLL) ..\t\$(NULL) | |
1767 | $(XCOPY) $(GLOBEXE) ..\t\$(NULL) | |
bf543eaf | 1768 | cd ..\t && perl.exe harness $(OPT) -re \bpat\\/ $(EXTRA) |
342634f3 | 1769 | |
1770 | regen : | |
bf543eaf | 1771 | cd .. && regen.pl |
342634f3 | 1772 | |
1773 | test-notty : test-prep | |
1774 | set PERL_STATIC_EXT=$(STATIC_EXT) && \ | |
1775 | set PERL_SKIP_TTY_TEST=1 && \ | |
bf543eaf | 1776 | cd ..\t && perl.exe harness $(TEST_SWITCHES) $(TEST_FILES) |
342634f3 | 1777 | |
1778 | _test : | |
1779 | $(XCOPY) $(PERLEXE) ..\t\$(NULL) | |
1780 | $(XCOPY) $(PERLDLL) ..\t\$(NULL) | |
1781 | $(XCOPY) $(GLOBEXE) ..\t\$(NULL) | |
1782 | set PERL_STATIC_EXT=$(STATIC_EXT) && \ | |
bf543eaf | 1783 | cd ..\t && perl.exe harness $(TEST_SWITCHES) $(TEST_FILES) |
342634f3 | 1784 | |
1785 | _clean : | |
1786 | -@erase miniperlmain$(o) | |
1787 | -@erase $(MINIPERL) | |
1788 | -@erase perlglob$(o) | |
1789 | -@erase perlmain$(o) | |
1790 | -@erase perlmainst$(o) | |
342634f3 | 1791 | -@erase /f config.h |
1792 | -@erase /f ..\git_version.h | |
1793 | -@erase $(GLOBEXE) | |
1794 | -@erase $(PERLEXE) | |
1795 | -@erase $(WPERLEXE) | |
1796 | -@erase $(PERLEXESTATIC) | |
1797 | -@erase $(PERLSTATICLIB) | |
1798 | -@erase $(PERLDLL) | |
1799 | -@erase $(CORE_OBJ) | |
1800 | -@erase $(GENUUDMAP) $(GENUUDMAP_OBJ) $(GENERATED_HEADERS) | |
8657e86b | 1801 | -@erase .coreheaders |
342634f3 | 1802 | -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) |
1803 | -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1) | |
1804 | -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2) | |
1805 | -@erase $(UNIDATAFILES) | |
1806 | -@erase $(WIN32_OBJ) | |
1807 | -@erase $(DLL_OBJ) | |
1808 | -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res | |
1809 | -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat | |
1810 | -@erase *.ilk | |
bf543eaf | 1811 | -@erase *.pdb ..\*.pdb |
342634f3 | 1812 | -@erase Extensions_static |
1813 | ||
1814 | clean : Extensions_clean _clean | |
1815 | ||
1816 | realclean : Extensions_realclean _clean | |
1817 | ||
1818 | # Handy way to run perlbug -ok without having to install and run the | |
1819 | # installed perlbug. We don't re-run the tests here - we trust the user. | |
1820 | # Please *don't* use this unless all tests pass. | |
1821 | # If you want to report test failures, use "gmake nok" instead. | |
bf543eaf DD |
1822 | ok: utils $(PERLEXE) $(PERLDLL) Extensions_nonxs Extensions |
1823 | $(PERLEXE) ..\utils\perlbug -ok -s "(UNINSTALLED)" | |
1824 | ||
1825 | okfile: utils $(PERLEXE) $(PERLDLL) Extensions_nonxs Extensions | |
1826 | $(PERLEXE) ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok | |
342634f3 | 1827 | |
bf543eaf DD |
1828 | nok: utils $(PERLEXE) $(PERLDLL) Extensions_nonxs Extensions |
1829 | $(PERLEXE) ..\utils\perlbug -nok -s "(UNINSTALLED)" | |
342634f3 | 1830 | |
bf543eaf DD |
1831 | nokfile: utils $(PERLEXE) $(PERLDLL) Extensions_nonxs Extensions |
1832 | $(PERLEXE) ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok | |
342634f3 | 1833 |