This is a live mirror of the Perl 5 development currently hosted at https://github.com/perl/perl5
backport EUMM commits
[perl5.git] / win32 / GNUmakefile
CommitLineData
342634f3 1#
2# Makefile to build perl on Windows using GNU make + gcc + MinGW.
3#
4# This is set up to build a perl.exe that runs off a shared library
16d5aac1 5# (perl523.dll). Also makes individual DLLs for the XS extensions.
342634f3 6#
7# The easiest way to customize the build process is to use parameters like this:
8#
9# c:\dev\perlsrc\win32> gmake INST_TOP=c:\sw\perl CCHOME=c:\sw\mingw USE_64_BIT_INT=define
10
11
12##
13## Make sure you read README.win32 *before* you mess with anything here!
14##
15
16#
17# We set this to point to cmd.exe in case GNU Make finds sh.exe in the path.
18# Comment this line out if necessary
19#
20SHELL := cmd.exe
21
22# define whether you want to use native gcc compiler or cross-compiler
23# possible values: gcc
24# i686-w64-mingw32-gcc
25# x86_64-w64-mingw32-gcc
26GCCBIN := gcc
27
28ifeq ($(GCCBIN),x86_64-w64-mingw32-gcc)
29GCCCROSS := x86_64-w64-mingw32
30endif
31ifeq ($(GCCBIN),i686-w64-mingw32-gcc)
32GCCCROSS := i686-w64-mingw32
33endif
34
35GCCTARGET := $(shell $(GCCBIN) -dumpmachine)
36GCCVER1 := $(shell for /f "delims=. tokens=1,2,3" %%i in ('gcc -dumpversion') do echo %%i)
37GCCVER2 := $(shell for /f "delims=. tokens=1,2,3" %%i in ('gcc -dumpversion') do echo %%j)
38GCCVER3 := $(shell for /f "delims=. tokens=1,2,3" %%i in ('gcc -dumpversion') do echo %%k)
39
40ifeq ($(GCCTARGET),x86_64-w64-mingw32)
41WIN64 := define
42ARCHITECTURE := x64
43endif
44ifeq ($(GCCTARGET),i686-w64-mingw32)
45WIN64 := undef
46ARCHITECTURE := x86
47endif
48
49##
50## Build configuration. Edit the values below to suit your needs.
51##
52
53#
54# Set these to wherever you want "gmake install" to put your
55# newly built perl.
56#
57INST_DRV := c:
58INST_TOP := $(INST_DRV)\perl
59
60#
61# Comment this out if you DON'T want your perl installation to be versioned.
62# This means that the new installation will overwrite any files from the
63# old installation at the same INST_TOP location. Leaving it enabled is
64# the safest route, as perl adds the extra version directory to all the
65# locations it installs files to. If you disable it, an alternative
66# versioned installation can be obtained by setting INST_TOP above to a
67# path that includes an arbitrary version string.
68#
b95300a8 69#INST_VER := \5.23.8
342634f3 70
71#
72# Comment this out if you DON'T want your perl installation to have
73# architecture specific components. This means that architecture-
74# specific files will be installed along with the architecture-neutral
75# files. Leaving it enabled is safer and more flexible, in case you
76# want to build multiple flavors of perl and install them together in
77# the same location. Commenting it out gives you a simpler
78# installation that is easier to understand for beginners.
79#
80#INST_ARCH := \$(ARCHNAME)
81
82#
83# Uncomment this if you want perl to run
84# $Config{sitelibexp}\sitecustomize.pl
85# before anything else. This script can then be set up, for example,
86# to add additional entries to @INC.
87#
88#USE_SITECUST := define
89
90#
91# uncomment to enable multiple interpreters. This is needed for fork()
92# emulation and for thread support, and is auto-enabled by USE_IMP_SYS
93# and USE_ITHREADS below.
94#
95USE_MULTI := define
96
97#
98# Interpreter cloning/threads; now reasonably complete.
99# This should be enabled to get the fork() emulation. This needs (and
100# will auto-enable) USE_MULTI above.
101#
102USE_ITHREADS := define
103
104#
105# uncomment to enable the implicit "host" layer for all system calls
106# made by perl. This is also needed to get fork(). This needs (and
107# will auto-enable) USE_MULTI above.
108#
109USE_IMP_SYS := define
110
111#
112# Comment out next assign to disable perl's I/O subsystem and use compiler's
113# stdio for IO - depending on your compiler vendor and run time library you may
114# then get a number of fails from make test i.e. bugs - complain to them not us ;-).
115# You will also be unable to take full advantage of perl5.8's support for multiple
116# encodings and may see lower IO performance. You have been warned.
117#
118USE_PERLIO := define
119
120#
121# Comment this out if you don't want to enable large file support for
122# some reason. Should normally only be changed to maintain compatibility
123# with an older release of perl.
124#
125USE_LARGE_FILES := define
126
127#
128# Uncomment this if you're building a 32-bit perl and want 64-bit integers.
129# (If you're building a 64-bit perl then you will have 64-bit integers whether
130# or not this is uncommented.)
131# Note: This option is not supported in 32-bit MSVC60 builds.
132#
133#USE_64_BIT_INT := define
134
135#
136# Uncomment this if you want to support the use of long doubles.
137#
138#USE_LONG_DOUBLE :=define
139
140#
141# uncomment next line if you want debug version of perl (big,slow)
142# If not enabled, we automatically try to use maximum optimization
143# with all compilers that are known to have a working optimizer.
144#
145#CFG := Debug
146
147#
148# uncomment to enable linking with setargv.obj under the Visual C
149# compiler. Setting this options enables perl to expand wildcards in
150# arguments, but it may be harder to use alternate methods like
151# File::DosGlob that are more powerful. This option is supported only with
152# Visual C.
153#
154#USE_SETARGV := define
155
156#
157# set this if you wish to use perl's malloc
158# WARNING: Turning this on/off WILL break binary compatibility with extensions
159# you may have compiled with/without it. Be prepared to recompile all
160# extensions if you change the default. Currently, this cannot be enabled
161# if you ask for USE_IMP_SYS above.
162#
163#PERL_MALLOC := define
164
165#
166# set this to enable debugging mstats
167# This must be enabled to use the Devel::Peek::mstat() function. This cannot
168# be enabled without PERL_MALLOC as well.
169#
170#DEBUG_MSTATS := define
171
172#
173# set this to additionally provide a statically linked perl-static.exe.
174# Note that dynamic loading will not work with this perl, so you must
175# include required modules statically using the STATIC_EXT or ALL_STATIC
16d5aac1 176# variables below. A static library perl523s.lib will also be created.
342634f3 177# Ordinary perl.exe is not affected by this option.
178#
179#BUILD_STATIC := define
180
181#
182# in addition to BUILD_STATIC the option ALL_STATIC makes *every*
183# extension get statically built
184# This will result in a very large perl executable, but the main purpose
185# is to have proper linking set so as to be able to create miscellaneous
186# executables with different built-in extensions
187#
188#ALL_STATIC := define
189
190#
191# set the install locations of the compiler include/libraries
192# Running VCVARS32.BAT is *required* when using Visual C.
193# Some versions of Visual C don't define MSVCDIR in the environment,
194# so you may have to set CCHOME explicitly (spaces in the path name should
195# not be quoted)
196#
197CCHOME := C:\MinGW
198
199#
200# Following sets $Config{incpath} and $Config{libpth}
201#
202
203ifneq ($(GCCCROSS),)
204CCINCDIR := $(CCHOME)\$(GCCCROSS)\include
205CCLIBDIR := $(CCHOME)\$(GCCCROSS)\lib
206CCDLLDIR := $(CCLIBDIR)
207ARCHPREFIX := $(GCCCROSS)-
208else
209CCINCDIR := $(CCHOME)\include
210CCLIBDIR := $(CCHOME)\lib
211CCDLLDIR := $(CCHOME)\bin
212ARCHPREFIX :=
213endif
214
215#
216# Additional compiler flags can be specified here.
217#
218BUILDOPT := $(BUILDOPTEXTRA)
219
220#
221# This should normally be disabled. Enabling it will disable the File::Glob
222# implementation of CORE::glob.
223#
224#BUILDOPT += -DPERL_EXTERNAL_GLOB
225
226#
227# Perl needs to read scripts in text mode so that the DATA filehandle
228# works correctly with seek() and tell(), or around auto-flushes of
229# all filehandles (e.g. by system(), backticks, fork(), etc).
230#
231# The current version on the ByteLoader module on CPAN however only
232# works if scripts are read in binary mode. But before you disable text
233# mode script reading (and break some DATA filehandle functionality)
234# please check first if an updated ByteLoader isn't available on CPAN.
235#
236BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
237
238#
239# specify semicolon-separated list of extra directories that modules will
240# look for libraries (spaces in path names need not be quoted)
241#
242EXTRALIBDIRS :=
243
244#
245# set this to your email address (perl will guess a value from
246# from your loginname and your hostname, which may not be right)
247#
248#EMAIL :=
249
250##
251## Build configuration ends.
252##
253
254##################### CHANGE THESE ONLY IF YOU MUST #####################
255
256PERL_MALLOC ?= undef
257DEBUG_MSTATS ?= undef
258
259USE_SITECUST ?= undef
260USE_MULTI ?= undef
261USE_ITHREADS ?= undef
262USE_IMP_SYS ?= undef
263USE_PERLIO ?= undef
264USE_LARGE_FILES ?= undef
265USE_64_BIT_INT ?= undef
266USE_LONG_DOUBLE ?= undef
267
268ifeq ($(USE_IMP_SYS),define)
269PERL_MALLOC = undef
270endif
271
272ifeq ($(PERL_MALLOC),undef)
273DEBUG_MSTATS = undef
274endif
275
276ifeq ($(DEBUG_MSTATS),define)
277BUILDOPT += -DPERL_DEBUGGING_MSTATS
278endif
279
280ifeq ("$(USE_IMP_SYS) $(USE_MULTI)","define undef")
281USE_MULTI = define
282endif
283
284ifeq ("$(USE_ITHREADS) $(USE_MULTI)","define undef")
285USE_MULTI = define
286endif
287
288ifeq ($(USE_SITECUST),define)
289BUILDOPT += -DUSE_SITECUSTOMIZE
290endif
291
292ifneq ($(USE_MULTI),undef)
293BUILDOPT += -DPERL_IMPLICIT_CONTEXT
294endif
295
296ifneq ($(USE_IMP_SYS),undef)
297BUILDOPT += -DPERL_IMPLICIT_SYS
298endif
299
300ifeq ($(WIN64),define)
301USE_64_BIT_INT = define
302endif
303
304ifeq ($(USE_MULTI),define)
305ARCHNAME = MSWin32-$(ARCHITECTURE)-multi
306else
307ifeq ($(USE_PERLIO),define)
308ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio
309else
310ARCHNAME = MSWin32-$(ARCHITECTURE)
311endif
312endif
313
314ifeq ($(USE_PERLIO),define)
315BUILDOPT += -DUSE_PERLIO
316endif
317
318ifeq ($(USE_ITHREADS),define)
319ARCHNAME := $(ARCHNAME)-thread
320endif
321
322ifneq ($(WIN64),define)
323ifeq ($(USE_64_BIT_INT),define)
324ARCHNAME := $(ARCHNAME)-64int
325endif
326endif
327
328ifeq ($(USE_LONG_DOUBLE),define)
329ARCHNAME := $(ARCHNAME)-ld
330endif
331
332ARCHDIR = ..\lib\$(ARCHNAME)
333COREDIR = ..\lib\CORE
334AUTODIR = ..\lib\auto
335LIBDIR = ..\lib
336EXTDIR = ..\ext
337DISTDIR = ..\dist
338CPANDIR = ..\cpan
339PODDIR = ..\pod
340HTMLDIR = .\html
341
342#
343INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
344INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
345INST_LIB = $(INST_TOP)$(INST_VER)\lib
346INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
347INST_COREDIR = $(INST_ARCHLIB)\CORE
348INST_HTML = $(INST_TOP)$(INST_VER)\html
349
350#
351# Programs to compile, build .lib files and link
352#
353
354MINIBUILDOPT :=
355
356CC = $(ARCHPREFIX)gcc
357LINK32 = $(ARCHPREFIX)g++
358LIB32 = $(ARCHPREFIX)ar rc
359IMPLIB = $(ARCHPREFIX)dlltool
360RSC = $(ARCHPREFIX)windres
361
362ifeq ($(USE_LONG_DOUBLE),define)
363BUILDOPT += -D__USE_MINGW_ANSI_STDIO
364MINIBUILDOPT += -D__USE_MINGW_ANSI_STDIO
365endif
366
367# If you are using GCC, 4.3 or later by default we add the -fwrapv option.
368# See https://rt.perl.org/Ticket/Display.html?id=121505
369#
370GCCWRAPV := $(shell if "$(GCCVER1)"=="4" (if "$(GCCVER2)" geq "3" echo define) else if "$(GCCVER1)" geq "5" (echo define))
371
372ifeq ($(GCCWRAPV),define)
373BUILDOPT += -fwrapv
374MINIBUILDOPT += -fwrapv
375endif
376
377i = .i
378o = .o
379a = .a
380
381#
382# Options
383#
384
385INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
386DEFINES = -DWIN32
387ifeq ($(WIN64),define)
388DEFINES += -DWIN64 -DCONSERVATIVE
389endif
390LOCDEFS = -DPERLDLL -DPERL_CORE
391SUBSYS = console
392CXX_FLAG = -xc++
393LIBC =
394LIBFILES = $(LIBC) \
395 -lmoldname -lkernel32 -luser32 -lgdi32 \
396 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
397 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \
398 -lwinmm -lversion -lodbc32 -lodbccp32 -lcomctl32
399
400ifeq ($(CFG),Debug)
401OPTIMIZE = -g -O2 -DDEBUGGING
402LINK_DBG = -g
403else
404OPTIMIZE = -s -O2
405LINK_DBG = -s
406endif
407
408EXTRACFLAGS =
409CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
410LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
411OBJOUT_FLAG = -o
412EXEOUT_FLAG = -o
413LIBOUT_FLAG =
414
415BUILDOPT += -fno-strict-aliasing -mms-bitfields
16d5aac1 416MINIBUILDOPT += -fno-strict-aliasing
342634f3 417CFLAGS_O = $(CFLAGS) $(BUILDOPT)
418
419# used to allow local linking flags that are not propogated into Config.pm,
420# currently unused
421# -- BKS, 12-12-1999
422PRIV_LINK_FLAGS =
423BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
424
425#################### do not edit below this line #######################
426############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
427
428%$(o): %.c
429 $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
430
431%.i: %.c
432 $(CC) -c -I$(<D) $(CFLAGS_O) -E $< >$@
433
434%.c: %.y
435 $(NOOP)
436
437%.dll: %$(o)
438 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
439 $(IMPLIB) --input-def $(*F).def --output-lib $(*F).a $@
440
441%.res: %.rc
442 $(RSC) --use-temp-file --include-dir=. --include-dir=.. -O COFF -D INCLUDE_MANIFEST -i $< -o $@
443
444#
445# various targets
446MINIPERL = ..\miniperl.exe
447MINIDIR = mini
448PERLEXE = ..\perl.exe
449WPERLEXE = ..\wperl.exe
450PERLEXESTATIC = ..\perl-static.exe
451STATICDIR = .\static.tmp
452GLOBEXE = ..\perlglob.exe
453CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
454GENUUDMAP = ..\generate_uudmap.exe
455ifeq ($(BUILD_STATIC),define)
456PERLSTATIC = static
457else
458ifeq ($(ALL_STATIC),define)
459PERLSTATIC = static
460else
461PERLSTATIC =
462endif
463endif
464
465# Unicode data files generated by mktables
466UNIDATAFILES = ..\lib\unicore\Decomposition.pl ..\lib\unicore\TestProp.pl \
467 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
468 ..\lib\unicore\UCD.pl ..\lib\unicore\Name.pm \
469 ..\lib\unicore\Heavy.pl ..\lib\unicore\mktables.lst
470
471# Directories of Unicode data files generated by mktables
472UNIDATADIR1 = ..\lib\unicore\To
473UNIDATADIR2 = ..\lib\unicore\lib
474
475PERLEXE_MANIFEST= .\perlexe.manifest
476PERLEXE_ICO = .\perlexe.ico
477PERLEXE_RES = .\perlexe.res
478PERLDLL_RES =
479
480# Nominate a target which causes extensions to be re-built
481# This used to be $(PERLEXE), but at worst it is the .dll that they depend
482# on and really only the interface - i.e. the .def file used to export symbols
483# from the .dll
484PERLDEP = perldll.def
485
486
487PL2BAT = bin\pl2bat.pl
488
489UTILS = \
490 ..\utils\h2ph \
491 ..\utils\splain \
492 ..\utils\perlbug \
493 ..\utils\pl2pm \
494 ..\utils\c2ph \
495 ..\utils\pstruct \
496 ..\utils\h2xs \
497 ..\utils\perldoc \
498 ..\utils\perlivp \
499 ..\utils\libnetcfg \
500 ..\utils\enc2xs \
501 ..\utils\piconv \
502 ..\utils\corelist \
503 ..\utils\cpan \
504 ..\utils\xsubpp \
505 ..\utils\pod2html \
506 ..\utils\prove \
507 ..\utils\ptar \
508 ..\utils\ptardiff \
509 ..\utils\ptargrep \
510 ..\utils\zipdetails \
511 ..\utils\shasum \
512 ..\utils\instmodsh \
513 ..\utils\json_pp \
514 bin\exetype.pl \
515 bin\runperl.pl \
516 bin\pl2bat.pl \
517 bin\perlglob.pl \
518 bin\search.pl
519
520CFGSH_TMPL = config.gc
521CFGH_TMPL = config_H.gc
16d5aac1
TC
522PERLIMPLIB = ..\libperl523$(a)
523PERLSTATICLIB = ..\libperl523s$(a)
342634f3 524INT64 = long long
525
526# makedef.pl must be updated if this changes, and this should normally
527# only change when there is an incompatible revision of the public API.
16d5aac1 528PERLDLL = ..\perl523.dll
342634f3 529
530XCOPY = xcopy /f /r /i /d /y
531RCOPY = xcopy /f /r /i /e /d /y
532NOOP = @rem
533
534MICROCORE_SRC = \
535 ..\av.c \
536 ..\caretx.c \
537 ..\deb.c \
538 ..\doio.c \
539 ..\doop.c \
a55c5245 540 ..\dquote.c \
342634f3 541 ..\dump.c \
542 ..\globals.c \
543 ..\gv.c \
16d5aac1 544 ..\mro_core.c \
342634f3 545 ..\hv.c \
546 ..\locale.c \
547 ..\keywords.c \
548 ..\mathoms.c \
549 ..\mg.c \
550 ..\numeric.c \
551 ..\op.c \
552 ..\pad.c \
553 ..\perl.c \
554 ..\perlapi.c \
555 ..\perly.c \
556 ..\pp.c \
557 ..\pp_ctl.c \
558 ..\pp_hot.c \
559 ..\pp_pack.c \
560 ..\pp_sort.c \
561 ..\pp_sys.c \
562 ..\reentr.c \
563 ..\regcomp.c \
564 ..\regexec.c \
565 ..\run.c \
566 ..\scope.c \
567 ..\sv.c \
568 ..\taint.c \
f832b29a 569 ..\time64.c \
342634f3 570 ..\toke.c \
571 ..\universal.c \
572 ..\utf8.c \
573 ..\util.c
574
575EXTRACORE_SRC += perllib.c
576
577ifeq ($(PERL_MALLOC),define)
578EXTRACORE_SRC += ..\malloc.c
579endif
580
581EXTRACORE_SRC += ..\perlio.c
582
583WIN32_SRC = \
584 .\win32.c \
585 .\win32sck.c \
586 .\win32thread.c \
587 .\fcrypt.c
588
589# We need this for miniperl build unless we override canned
590# config.h #define building mini\*
591#ifeq ($(USE_PERLIO)" == "define"
592WIN32_SRC += .\win32io.c
593#endif
594
595CORE_NOCFG_H = \
596 ..\av.h \
597 ..\cop.h \
598 ..\cv.h \
599 ..\dosish.h \
600 ..\embed.h \
601 ..\form.h \
602 ..\gv.h \
603 ..\handy.h \
604 ..\hv.h \
605 ..\hv_func.h \
606 ..\iperlsys.h \
607 ..\mg.h \
608 ..\nostdio.h \
609 ..\op.h \
610 ..\opcode.h \
611 ..\perl.h \
612 ..\perlapi.h \
613 ..\perlsdio.h \
614 ..\perly.h \
615 ..\pp.h \
616 ..\proto.h \
617 ..\regcomp.h \
618 ..\regexp.h \
619 ..\scope.h \
620 ..\sv.h \
621 ..\thread.h \
622 ..\unixish.h \
623 ..\utf8.h \
624 ..\util.h \
625 ..\warnings.h \
626 ..\XSUB.h \
627 ..\EXTERN.h \
628 ..\perlvars.h \
629 ..\intrpvar.h \
630 .\include\dirent.h \
631 .\include\netdb.h \
632 .\include\sys\errno2.h \
633 .\include\sys\socket.h \
634 .\win32.h
635
636CORE_H = $(CORE_NOCFG_H) .\config.h ..\git_version.h
637
638UUDMAP_H = ..\uudmap.h
639BITCOUNT_H = ..\bitcount.h
640MG_DATA_H = ..\mg_data.h
641GENERATED_HEADERS = $(UUDMAP_H) $(BITCOUNT_H) $(MG_DATA_H)
642
643MICROCORE_OBJ = $(MICROCORE_SRC:.c=.o)
644CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.o)
645WIN32_OBJ = $(WIN32_SRC:.c=.o)
646
647MINICORE_OBJ = $(subst ..\,mini\,$(MICROCORE_OBJ)) \
648 $(MINIDIR)\miniperlmain$(o) \
649 $(MINIDIR)\perlio$(o)
650MINIWIN32_OBJ = $(subst .\,mini\,$(WIN32_OBJ))
651MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
652DLL_OBJ = $(DYNALOADER)
653GENUUDMAP_OBJ = $(GENUUDMAP:.exe=.o)
654
655PERLDLL_OBJ = $(CORE_OBJ)
656PERLEXE_OBJ = perlmain$(o)
657PERLEXEST_OBJ = perlmainst$(o)
658
659PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
660
661ifneq ($(USE_SETARGV),)
662SETARGV_OBJ = setargv$(o)
663endif
664
665ifeq ($(ALL_STATIC),define)
666# some exclusions, unfortunately, until fixed:
667# - MakeMaker isn't capable enough for SDBM_File (small bug)
668STATIC_EXT = * !SDBM_File
669else
670# specify static extensions here, for example:
671# (be sure to include Win32CORE to load Win32 on demand)
672#STATIC_EXT = Win32CORE Cwd Compress/Raw/Zlib
673STATIC_EXT = Win32CORE
674endif
675
676DYNALOADER = ..\DynaLoader$(o)
677
678# vars must be separated by "\t+~\t+", since we're using the tempfile
679# version of config_sh.pl (we were overflowing someone's buffer by
680# trying to fit them all on the command line)
681# -- BKS 10-17-1999
682CFG_VARS = \
683 "INST_TOP=$(INST_TOP)" \
684 "INST_VER=$(INST_VER)" \
685 "INST_ARCH=$(INST_ARCH)" \
686 "archname=$(ARCHNAME)" \
687 "cc=$(CC)" \
688 "ld=$(LINK32)" \
689 "ccflags=$(EXTRACFLAGS) $(OPTIMIZE) $(DEFINES) $(BUILDOPT)" \
690 "cf_email=$(EMAIL)" \
691 "d_mymalloc=$(PERL_MALLOC)" \
692 "libs=$(LIBFILES)" \
693 "incpath=$(CCINCDIR)" \
694 "libperl=$(subst ..\,,$(PERLIMPLIB))" \
695 "libpth=$(CCLIBDIR);$(EXTRALIBDIRS)" \
696 "libc=$(LIBC)" \
697 "make=$(MAKE)" \
698 "_o=$(o)" \
699 "obj_ext=$(o)" \
700 "_a=$(a)" \
701 "lib_ext=$(a)" \
702 "static_ext=$(STATIC_EXT)" \
703 "usethreads=$(USE_ITHREADS)" \
704 "useithreads=$(USE_ITHREADS)" \
705 "usemultiplicity=$(USE_MULTI)" \
706 "useperlio=$(USE_PERLIO)" \
707 "use64bitint=$(USE_64_BIT_INT)" \
708 "uselongdouble=$(USE_LONG_DOUBLE)" \
709 "uselargefiles=$(USE_LARGE_FILES)" \
710 "usesitecustomize=$(USE_SITECUST)" \
711 "LINK_FLAGS=$(LINK_FLAGS)" \
712 "optimize=$(OPTIMIZE)" \
713 "ARCHPREFIX=$(ARCHPREFIX)" \
714 "WIN64=$(WIN64)"
715
716#
717# Top targets
718#
719
720.PHONY: all info
721
722all : info .\config.h ..\git_version.h $(GLOBEXE) $(MINIPERL) \
723 $(CONFIGPM) $(UNIDATAFILES) MakePPPort \
724 $(PERLEXE) Extensions Extensions_nonxs $(PERLSTATIC)
725
726info :
727 @echo # GCCBIN=$(GCCBIN)
728 @echo # GCCVER=$(GCCVER1).$(GCCVER2).$(GCCVER3)
729 @echo # GCCTARGET=$(GCCTARGET)
730 @echo # GCCCROSS=$(GCCCROSS)
731 @echo # WIN64=$(WIN64)
732 @echo # ARCHITECTURE=$(ARCHITECTURE)
733 @echo # ARCHNAME=$(ARCHNAME)
734 @echo # MAKE=$(MAKE)
735ifeq ($(GCCTARGET),)
736 @echo Unable to detect gcc and/or architecture!
737 @exit 1
738endif
739
740
741regnodes : ..\regnodes.h
742
743..\regcomp$(o) : ..\regnodes.h ..\regcharclass.h
744
745..\regexec$(o) : ..\regnodes.h ..\regcharclass.h
746
747reonly : regnodes .\config.h ..\git_version.h $(GLOBEXE) $(MINIPERL) \
748 $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
749 Extensions_reonly
750
751static: $(PERLEXESTATIC)
752
753#----------------------------------------------------------------
754
755$(GLOBEXE) : perlglob$(o)
756 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
757
758perlglob$(o) : perlglob.c
759
342634f3 760#
761# Copy the template config.h and set configurables at the end of it
762# as per the options chosen and compiler used.
763# Note: This config.h is only used to build miniperl.exe anyway, but
764# it's as well to have its options correct to be sure that it builds
765# and so that it's "-V" options are correct for use by makedef.pl. The
766# real config.h used to build perl.exe is generated from the top-level
767# config_h.SH by config_h.PL (run by miniperl.exe).
768#
769.\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
770 -del /f config.h
771 copy $(CFGH_TMPL) config.h
772 @echo.>>$@
773 @echo #ifndef _config_h_footer_>>$@
774 @echo #define _config_h_footer_>>$@
775 @echo #undef Off_t>>$@
776 @echo #undef LSEEKSIZE>>$@
777 @echo #undef Off_t_size>>$@
778 @echo #undef PTRSIZE>>$@
779 @echo #undef SSize_t>>$@
780 @echo #undef HAS_ATOLL>>$@
781 @echo #undef HAS_STRTOLL>>$@
782 @echo #undef HAS_STRTOULL>>$@
783 @echo #undef Size_t_size>>$@
784 @echo #undef IVTYPE>>$@
785 @echo #undef UVTYPE>>$@
786 @echo #undef IVSIZE>>$@
787 @echo #undef UVSIZE>>$@
788 @echo #undef NV_PRESERVES_UV>>$@
789 @echo #undef NV_PRESERVES_UV_BITS>>$@
790 @echo #undef IVdf>>$@
791 @echo #undef UVuf>>$@
792 @echo #undef UVof>>$@
793 @echo #undef UVxf>>$@
794 @echo #undef UVXf>>$@
795 @echo #undef USE_64_BIT_INT>>$@
796 @echo #undef Gconvert>>$@
797 @echo #undef HAS_FREXPL>>$@
798 @echo #undef HAS_ISNANL>>$@
799 @echo #undef HAS_MODFL>>$@
800 @echo #undef HAS_MODFL_PROTO>>$@
801 @echo #undef HAS_SQRTL>>$@
802 @echo #undef HAS_STRTOLD>>$@
803 @echo #undef PERL_PRIfldbl>>$@
804 @echo #undef PERL_PRIgldbl>>$@
805 @echo #undef PERL_PRIeldbl>>$@
806 @echo #undef PERL_SCNfldbl>>$@
807 @echo #undef NVTYPE>>$@
808 @echo #undef NVSIZE>>$@
809 @echo #undef LONG_DOUBLESIZE>>$@
810 @echo #undef NV_OVERFLOWS_INTEGERS_AT>>$@
811 @echo #undef NVef>>$@
812 @echo #undef NVff>>$@
813 @echo #undef NVgf>>$@
814 @echo #undef USE_LONG_DOUBLE>>$@
815ifeq ($(USE_LARGE_FILES),define)
816 @echo #define Off_t $(INT64)>>$@
817 @echo #define LSEEKSIZE ^8>>$@
818 @echo #define Off_t_size ^8>>$@
819else
820 @echo #define Off_t long>>$@
821 @echo #define LSEEKSIZE ^4>>$@
822 @echo #define Off_t_size ^4>>$@
823endif
824ifeq ($(WIN64),define)
825 @echo #define PTRSIZE ^8>>$@
826 @echo #define SSize_t $(INT64)>>$@
827 @echo #define HAS_ATOLL>>$@
828 @echo #define HAS_STRTOLL>>$@
829 @echo #define HAS_STRTOULL>>$@
830 @echo #define Size_t_size ^8>>$@
831else
832 @echo #define PTRSIZE ^4>>$@
833 @echo #define SSize_t int>>$@
834 @echo #undef HAS_ATOLL>>$@
835 @echo #undef HAS_STRTOLL>>$@
836 @echo #undef HAS_STRTOULL>>$@
837 @echo #define Size_t_size ^4>>$@
838endif
839ifeq ($(USE_64_BIT_INT),define)
840 @echo #define IVTYPE $(INT64)>>$@
841 @echo #define UVTYPE unsigned $(INT64)>>$@
842 @echo #define IVSIZE ^8>>$@
843 @echo #define UVSIZE ^8>>$@
844ifeq ($(USE_LONG_DOUBLE),define)
845 @echo #define NV_PRESERVES_UV>>$@
846 @echo #define NV_PRESERVES_UV_BITS 64>>$@
847else
848 @echo #undef NV_PRESERVES_UV>>$@
849 @echo #define NV_PRESERVES_UV_BITS 53>>$@
850endif
851 @echo #define IVdf "I64d">>$@
852 @echo #define UVuf "I64u">>$@
853 @echo #define UVof "I64o">>$@
854 @echo #define UVxf "I64x">>$@
855 @echo #define UVXf "I64X">>$@
856 @echo #define USE_64_BIT_INT>>$@
857else
858 @echo #define IVTYPE long>>$@
859 @echo #define UVTYPE unsigned long>>$@
860 @echo #define IVSIZE ^4>>$@
861 @echo #define UVSIZE ^4>>$@
862 @echo #define NV_PRESERVES_UV>>$@
863 @echo #define NV_PRESERVES_UV_BITS 32>>$@
864 @echo #define IVdf "ld">>$@
865 @echo #define UVuf "lu">>$@
866 @echo #define UVof "lo">>$@
867 @echo #define UVxf "lx">>$@
868 @echo #define UVXf "lX">>$@
869 @echo #undef USE_64_BIT_INT>>$@
870endif
871ifeq ($(USE_LONG_DOUBLE),define)
872 @echo #define Gconvert(x,n,t,b) sprintf((b),"%%.*""Lg",(n),(x))>>$@
873 @echo #define HAS_FREXPL>>$@
874 @echo #define HAS_ISNANL>>$@
875 @echo #define HAS_MODFL>>$@
876 @echo #define HAS_MODFL_PROTO>>$@
877 @echo #define HAS_SQRTL>>$@
878 @echo #define HAS_STRTOLD>>$@
879 @echo #define PERL_PRIfldbl "Lf">>$@
880 @echo #define PERL_PRIgldbl "Lg">>$@
881 @echo #define PERL_PRIeldbl "Le">>$@
882 @echo #define PERL_SCNfldbl "Lf">>$@
883 @echo #define NVTYPE long double>>$@
884ifeq ($(WIN64),define)
885 @echo #define NVSIZE ^16>>$@
886 @echo #define LONG_DOUBLESIZE ^16>>$@
887else
888 @echo #define NVSIZE ^12>>$@
889 @echo #define LONG_DOUBLESIZE ^12>>$@
890endif
891 @echo #define NV_OVERFLOWS_INTEGERS_AT 256.0*256.0*256.0*256.0*256.0*256.0*256.0*2.0*2.0*2.0*2.0*2.0*2.0*2.0*2.0>>$@
892 @echo #define NVef "Le">>$@
893 @echo #define NVff "Lf">>$@
894 @echo #define NVgf "Lg">>$@
895 @echo #define USE_LONG_DOUBLE>>$@
896else
897 @echo #define Gconvert(x,n,t,b) sprintf((b),"%%.*g",(n),(x))>>$@
898 @echo #undef HAS_FREXPL>>$@
899 @echo #undef HAS_ISNANL>>$@
900 @echo #undef HAS_MODFL>>$@
901 @echo #undef HAS_MODFL_PROTO>>$@
902 @echo #undef HAS_SQRTL>>$@
903 @echo #undef HAS_STRTOLD>>$@
904 @echo #undef PERL_PRIfldbl>>$@
905 @echo #undef PERL_PRIgldbl>>$@
906 @echo #undef PERL_PRIeldbl>>$@
907 @echo #undef PERL_SCNfldbl>>$@
908 @echo #define NVTYPE double>>$@
909 @echo #define NVSIZE ^8>>$@
910 @echo #define LONG_DOUBLESIZE ^8>>$@
911 @echo #define NV_OVERFLOWS_INTEGERS_AT 256.0*256.0*256.0*256.0*256.0*256.0*2.0*2.0*2.0*2.0*2.0>>$@
912 @echo #define NVef "e">>$@
913 @echo #define NVff "f">>$@
914 @echo #define NVgf "g">>$@
915 @echo #undef USE_LONG_DOUBLE>>$@
916endif
917 @echo #endif>>$@
918
919..\git_version.h : $(MINIPERL) ..\make_patchnum.pl
920 cd .. && miniperl -Ilib make_patchnum.pl
921
922# make sure that we recompile perl.c if the git version changes
923..\perl$(o) : ..\git_version.h
924
771d08d0
SH
925..\config.sh : $(CFGSH_TMPL) config_sh.PL FindExt.pm $(MINIPERL)
926 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
342634f3 927
928# This target is for when changes to the main config.sh happen.
929# Edit config.gc, then make perl using GCC in a minimal configuration (i.e.
930# with MULTI, ITHREADS, IMP_SYS, LARGE_FILES and PERLIO off), then make
931# this target to regenerate config_H.gc.
932regen_config_h:
933 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS)) $(CFGSH_TMPL) > ..\config.sh
934 $(MINIPERL) -I..\lib ..\configpm --chdir=..
935 -del /f $(CFGH_TMPL)
936 -$(MINIPERL) -I..\lib config_h.PL "ARCHPREFIX=$(ARCHPREFIX)"
937 rename config.h $(CFGH_TMPL)
938
939$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL
940 $(MINIPERL) -I..\lib ..\configpm --chdir=..
941 if exist lib\* $(RCOPY) "lib\*.*" ..\lib\$(NULL)
942 $(XCOPY) "..\*.h" $(COREDIR)\$(NULL)
943 $(XCOPY) "*.h" $(COREDIR)\$(NULL)
944 $(RCOPY) include $(COREDIR)\$(NULL)
945 $(MINIPERL) -I..\lib config_h.PL "ARCHPREFIX=$(ARCHPREFIX)" \
946 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
947
948# See the comment in Makefile.SH explaining this seemingly cranky ordering
949$(MINIPERL) : ..\lib\buildcustomize.pl
950
951..\lib\buildcustomize.pl : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS) ..\write_buildcustomize.pl
952 $(LINK32) -mconsole -o $(MINIPERL) $(BLINK_FLAGS) $(MINI_OBJ) $(LIBFILES)
953 $(MINIPERL) -I..\lib -f ..\write_buildcustomize.pl ..
954
955$(MINIDIR) :
956 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
957
958$(MINICORE_OBJ) : $(CORE_NOCFG_H)
959 $(CC) -c $(CFLAGS) $(MINIBUILDOPT) -DPERL_EXTERNAL_GLOB -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ ..\$(*F).c
960
961$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
962 $(CC) -c $(CFLAGS) $(MINIBUILDOPT) -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ $(*F).c
963
964# -DPERL_IMPLICIT_SYS needs C++ for perllib.c
965# rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
966# unless the .IF is true), so instead we use a else with the default.
967# This is the only file that depends on perlhost.h, vmem.h, and vdir.h
968
969perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
970ifeq ($(USE_IMP_SYS),define)
971 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
972else
973 $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
974endif
975
976# 1. we don't want to rebuild miniperl.exe when config.h changes
977# 2. we don't want to rebuild miniperl.exe with non-default config.h
978# 3. we can't have miniperl.exe depend on git_version.h, as miniperl creates it
979$(MINI_OBJ) : $(CORE_NOCFG_H)
980
981$(WIN32_OBJ) : $(CORE_H)
982
983$(CORE_OBJ) : $(CORE_H)
984
985$(DLL_OBJ) : $(CORE_H)
986
987perldll.def : $(MINIPERL) $(CONFIGPM) ..\embed.fnc ..\makedef.pl create_perllibst_h.pl
988 $(MINIPERL) -I..\lib create_perllibst_h.pl
989 $(MINIPERL) -I..\lib -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
990 $(BUILDOPT) CCTYPE=GCC TARG_DIR=..\ > perldll.def
991
992$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
993 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
994 $(PERLDLL_OBJ) $(shell type Extensions_static) $(LIBFILES)
995 $(IMPLIB) --output-lib $(PERLIMPLIB) \
996 --dllname $(PERLDLL) \
997 --def perldll.def \
998 --base-file perl.base \
999 --output-exp perl.exp
1000 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
1001 $(PERLDLL_OBJ) $(shell type Extensions_static) $(LIBFILES) perl.exp
1002 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1003
1004$(PERLSTATICLIB): $(PERLDLL_OBJ) Extensions_static
1005 $(LIB32) $(LIB_FLAGS) $@ $(PERLDLL_OBJ)
1006 if exist $(STATICDIR) rmdir /s /q $(STATICDIR)
1007 for %%i in ($(shell type Extensions_static)) do \
1008 @mkdir $(STATICDIR) && cd $(STATICDIR) && \
1009 $(ARCHPREFIX)ar x ..\%%i && \
1010 $(ARCHPREFIX)ar q ..\$@ *$(o) && \
1011 cd .. && rmdir /s /q $(STATICDIR)
1012 $(XCOPY) $(PERLSTATICLIB) $(COREDIR)
1013
1014$(PERLEXE_RES): perlexe.rc $(PERLEXE_MANIFEST) $(PERLEXE_ICO)
1015
1016$(MINIDIR)\globals$(o) : $(GENERATED_HEADERS)
1017
1018$(UUDMAP_H) $(MG_DATA_H) : $(BITCOUNT_H)
1019
1020$(BITCOUNT_H) : $(GENUUDMAP)
1021 $(GENUUDMAP) $(GENERATED_HEADERS)
1022
1023$(GENUUDMAP_OBJ) : ..\mg_raw.h
1024
1025$(GENUUDMAP) : $(GENUUDMAP_OBJ)
1026 $(LINK32) -o $@ $(BLINK_FLAGS) $(GENUUDMAP_OBJ) $(LIBFILES)
1027
1028perlmain.c : runperl.c
1029 copy runperl.c perlmain.c
1030
1031perlmain$(o) : perlmain.c
1032 $(CC) $(subst -DPERLDLL,-UPERLDLL,$(CFLAGS_O)) $(OBJOUT_FLAG)$@ -c perlmain.c
1033
1034perlmainst.c : runperl.c
1035 copy runperl.c perlmainst.c
1036
1037perlmainst$(o) : perlmainst.c
1038 $(CC) $(CFLAGS_O) $(OBJOUT_FLAG)$@ -c perlmainst.c
1039
1040$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1041 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1042 $(PERLEXE_OBJ) $(PERLEXE_RES) $(PERLIMPLIB) $(LIBFILES)
1043 copy $(PERLEXE) $(WPERLEXE)
1044 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1045
1046$(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES)
1047 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1048 $(PERLEXEST_OBJ) $(PERLEXE_RES) $(PERLSTATICLIB) $(LIBFILES)
1049
1050MakePPPort: $(MINIPERL) $(CONFIGPM) Extensions_nonxs
1051 $(MINIPERL) -I..\lib ..\mkppport
1052
1053#-------------------------------------------------------------------------------
1054# There's no direct way to mark a dependency on
1055# DynaLoader.pm, so this will have to do
1056Extensions : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
1057 $(XCOPY) "..\*.h" $(COREDIR)\$(NULL)
1058 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic
1059
1060Extensions_reonly : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
1061 $(XCOPY) "..\*.h" $(COREDIR)\$(NULL)
1062 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic +re
1063
1064Extensions_static : ..\make_ext.pl ..\lib\buildcustomize.pl list_static_libs.pl $(PERLDEP) $(CONFIGPM) Extensions_nonxs
1065 $(XCOPY) "..\*.h" $(COREDIR)\$(NULL)
1066 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --static
1067 $(MINIPERL) -I..\lib list_static_libs.pl > Extensions_static
1068
1069Extensions_nonxs : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) ..\pod\perlfunc.pod
1070 $(XCOPY) "..\*.h" $(COREDIR)\$(NULL)
1071 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --nonxs
1072
1073$(DYNALOADER) : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) Extensions_nonxs
1074 $(XCOPY) "..\*.h" $(COREDIR)\$(NULL)
1075 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --dynaloader
1076
1077Extensions_clean :
1078 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=clean
1079
1080Extensions_realclean :
1081 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=realclean
1082
1083#-------------------------------------------------------------------------------
1084
1085doc: $(PERLEXE) ..\pod\perltoc.pod
1086 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
1087 --podpath=pod:lib:utils --htmlroot="file://$(subst :,|,$(INST_HTML))"\
1088 --recurse
1089
1090..\utils\Makefile: $(CONFIGPM) ..\utils\Makefile.PL
1091 $(MINIPERL) -I..\lib ..\utils\Makefile.PL ..
1092
1093# Note that this next section is parsed (and regenerated) by pod/buildtoc
1094# so please check that script before making structural changes here
1095utils: $(PERLEXE) ..\utils\Makefile
1096 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1097 copy ..\README.aix ..\pod\perlaix.pod
1098 copy ..\README.amiga ..\pod\perlamiga.pod
1099 copy ..\README.android ..\pod\perlandroid.pod
1100 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1101 copy ..\README.ce ..\pod\perlce.pod
1102 copy ..\README.cn ..\pod\perlcn.pod
1103 copy ..\README.cygwin ..\pod\perlcygwin.pod
1104 copy ..\README.dos ..\pod\perldos.pod
1105 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1106 copy ..\README.haiku ..\pod\perlhaiku.pod
1107 copy ..\README.hpux ..\pod\perlhpux.pod
1108 copy ..\README.hurd ..\pod\perlhurd.pod
1109 copy ..\README.irix ..\pod\perlirix.pod
1110 copy ..\README.jp ..\pod\perljp.pod
1111 copy ..\README.ko ..\pod\perlko.pod
1112 copy ..\README.linux ..\pod\perllinux.pod
1113 copy ..\README.macos ..\pod\perlmacos.pod
1114 copy ..\README.macosx ..\pod\perlmacosx.pod
1115 copy ..\README.netware ..\pod\perlnetware.pod
1116 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1117 copy ..\README.os2 ..\pod\perlos2.pod
1118 copy ..\README.os390 ..\pod\perlos390.pod
1119 copy ..\README.os400 ..\pod\perlos400.pod
1120 copy ..\README.plan9 ..\pod\perlplan9.pod
1121 copy ..\README.qnx ..\pod\perlqnx.pod
1122 copy ..\README.riscos ..\pod\perlriscos.pod
1123 copy ..\README.solaris ..\pod\perlsolaris.pod
1124 copy ..\README.symbian ..\pod\perlsymbian.pod
1125 copy ..\README.synology ..\pod\perlsynology.pod
1126 copy ..\README.tru64 ..\pod\perltru64.pod
1127 copy ..\README.tw ..\pod\perltw.pod
1128 copy ..\README.vos ..\pod\perlvos.pod
1129 copy ..\README.win32 ..\pod\perlwin32.pod
af8a293f 1130 copy ..\pod\perldelta.pod ..\pod\perl5238delta.pod
342634f3 1131 $(PERLEXE) $(PL2BAT) $(UTILS)
1132 $(MINIPERL) -I..\lib ..\autodoc.pl ..
1133 $(MINIPERL) -I..\lib ..\pod\perlmodlib.PL -q ..
1134
1135..\pod\perltoc.pod: $(PERLEXE) Extensions Extensions_nonxs
1136 $(PERLEXE) -f ..\pod\buildtoc -q
1137
1138# Note that the pod cleanup in this next section is parsed (and regenerated
1139# by pod/buildtoc so please check that script before making changes here
1140
1141distclean: realclean
1142 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1143 $(PERLIMPLIB) ..\miniperl$(a) $(PERLEXESTATIC) $(PERLSTATICLIB)
1144 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1145 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1146 -del /f $(LIBDIR)\.exists $(LIBDIR)\attributes.pm $(LIBDIR)\DynaLoader.pm
1147 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1148 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1149 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1150 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1151 -del /f $(LIBDIR)\File\Glob.pm
1152 -del /f $(LIBDIR)\Storable.pm
1153 -del /f $(LIBDIR)\Sys\Hostname.pm
1154 -del /f $(LIBDIR)\Time\HiRes.pm
1155 -del /f $(LIBDIR)\Unicode\Normalize.pm
1156 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1157 -del /f $(LIBDIR)\Win32.pm
1158 -del /f $(LIBDIR)\Win32CORE.pm
1159 -del /f $(LIBDIR)\Win32API\File.pm
1160 -del /f $(LIBDIR)\Win32API\File\cFile.pc
1161 -del /f $(LIBDIR)\buildcustomize.pl
1162 -del /f $(DISTDIR)\XSLoader\XSLoader.pm
1163 -del /f *.def *.map
1164 -if exist $(LIBDIR)\App rmdir /s /q $(LIBDIR)\App
1165 -if exist $(LIBDIR)\Archive rmdir /s /q $(LIBDIR)\Archive
1166 -if exist $(LIBDIR)\Attribute rmdir /s /q $(LIBDIR)\Attribute
1167 -if exist $(LIBDIR)\autodie rmdir /s /q $(LIBDIR)\autodie
1168 -if exist $(LIBDIR)\Carp rmdir /s /q $(LIBDIR)\Carp
1169 -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
1170 -if exist $(LIBDIR)\Config\Perl rmdir /s /q $(LIBDIR)\Config\Perl
1171 -if exist $(LIBDIR)\CPAN rmdir /s /q $(LIBDIR)\CPAN
1172 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1173 -if exist $(LIBDIR)\Devel rmdir /s /q $(LIBDIR)\Devel
1174 -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest
1175 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1176 -if exist $(LIBDIR)\encoding rmdir /s /q $(LIBDIR)\encoding
1177 -if exist $(LIBDIR)\Exporter rmdir /s /q $(LIBDIR)\Exporter
1178 -if exist $(LIBDIR)\ExtUtils\CBuilder rmdir /s /q $(LIBDIR)\ExtUtils\CBuilder
1179 -if exist $(LIBDIR)\ExtUtils\Command rmdir /s /q $(LIBDIR)\ExtUtils\Command
1180 -if exist $(LIBDIR)\ExtUtils\Constant rmdir /s /q $(LIBDIR)\ExtUtils\Constant
1181 -if exist $(LIBDIR)\ExtUtils\Liblist rmdir /s /q $(LIBDIR)\ExtUtils\Liblist
1182 -if exist $(LIBDIR)\ExtUtils\MakeMaker rmdir /s /q $(LIBDIR)\ExtUtils\MakeMaker
1183 -if exist $(LIBDIR)\ExtUtils\ParseXS rmdir /s /q $(LIBDIR)\ExtUtils\ParseXS
1184 -if exist $(LIBDIR)\ExtUtils\Typemaps rmdir /s /q $(LIBDIR)\ExtUtils\Typemaps
1185 -if exist $(LIBDIR)\File\Spec rmdir /s /q $(LIBDIR)\File\Spec
1186 -if exist $(LIBDIR)\Filter rmdir /s /q $(LIBDIR)\Filter
1187 -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
1188 -if exist $(LIBDIR)\HTTP rmdir /s /q $(LIBDIR)\HTTP
1189 -if exist $(LIBDIR)\I18N rmdir /s /q $(LIBDIR)\I18N
1190 -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
1191 -if exist $(LIBDIR)\IPC rmdir /s /q $(LIBDIR)\IPC
1192 -if exist $(LIBDIR)\JSON rmdir /s /q $(LIBDIR)\JSON
1193 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1194 -if exist $(LIBDIR)\Locale rmdir /s /q $(LIBDIR)\Locale
1195 -if exist $(LIBDIR)\Math rmdir /s /q $(LIBDIR)\Math
1196 -if exist $(LIBDIR)\Memoize rmdir /s /q $(LIBDIR)\Memoize
1197 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1198 -if exist $(LIBDIR)\Module rmdir /s /q $(LIBDIR)\Module
1199 -if exist $(LIBDIR)\Net\FTP rmdir /s /q $(LIBDIR)\Net\FTP
1200 -if exist $(LIBDIR)\Params rmdir /s /q $(LIBDIR)\Params
1201 -if exist $(LIBDIR)\Parse rmdir /s /q $(LIBDIR)\Parse
1202 -if exist $(LIBDIR)\Perl rmdir /s /q $(LIBDIR)\Perl
1203 -if exist $(LIBDIR)\PerlIO rmdir /s /q $(LIBDIR)\PerlIO
1204 -if exist $(LIBDIR)\Pod\Perldoc rmdir /s /q $(LIBDIR)\Pod\Perldoc
1205 -if exist $(LIBDIR)\Pod\Simple rmdir /s /q $(LIBDIR)\Pod\Simple
1206 -if exist $(LIBDIR)\Pod\Text rmdir /s /q $(LIBDIR)\Pod\Text
1207 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1208 -if exist $(LIBDIR)\Search rmdir /s /q $(LIBDIR)\Search
1209 -if exist $(LIBDIR)\Sub rmdir /s /q $(LIBDIR)\Sub
1210 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1211 -if exist $(LIBDIR)\TAP rmdir /s /q $(LIBDIR)\TAP
1212 -if exist $(LIBDIR)\Term rmdir /s /q $(LIBDIR)\Term
1213 -if exist $(LIBDIR)\Test rmdir /s /q $(LIBDIR)\Test
1214 -if exist $(LIBDIR)\Text rmdir /s /q $(LIBDIR)\Text
1215 -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread
1216 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1217 -if exist $(LIBDIR)\Tie\Hash rmdir /s /q $(LIBDIR)\Tie\Hash
1218 -if exist $(LIBDIR)\Unicode\Collate rmdir /s /q $(LIBDIR)\Unicode\Collate
1219 -if exist $(LIBDIR)\Unicode\Collate\Locale rmdir /s /q $(LIBDIR)\Unicode\Collate\Locale
1220 -if exist $(LIBDIR)\version rmdir /s /q $(LIBDIR)\version
1221 -if exist $(LIBDIR)\VMS rmdir /s /q $(LIBDIR)\VMS
1222 -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
1223 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1224 -cd $(PODDIR) && del /f *.html *.bat roffitall \
af8a293f 1225 perl5238delta.pod perlaix.pod perlamiga.pod perlandroid.pod \
342634f3 1226 perlapi.pod perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1227 perldos.pod perlfreebsd.pod perlhaiku.pod perlhpux.pod \
1228 perlhurd.pod perlintern.pod perlirix.pod perljp.pod perlko.pod \
1229 perllinux.pod perlmacos.pod perlmacosx.pod perlmodlib.pod \
1230 perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \
1231 perlos400.pod perlplan9.pod perlqnx.pod perlriscos.pod \
1232 perlsolaris.pod perlsymbian.pod perlsynology.pod perltoc.pod \
1233 perltru64.pod perltw.pod perluniprops.pod perlvos.pod \
1234 perlwin32.pod
1235 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1236 perldoc perlivp libnetcfg enc2xs piconv cpan *.bat \
1237 xsubpp pod2html instmodsh json_pp prove ptar ptardiff ptargrep shasum corelist zipdetails
1238 -del /f ..\config.sh perlmain.c dlutils.c config.h.new \
1239 perlmainst.c
1240 -del /f $(CONFIGPM)
1241 -del /f ..\lib\Config_git.pl
1242 -del /f "bin\*.bat"
1243 -del /f perllibst.h
1244 -del /f $(PERLEXE_RES) perl.base
1245 -cd .. && del /s *$(a) *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib ppport.h
1246 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1247 -cd $(DISTDIR) && del /s *.def Makefile Makefile.old
1248 -cd $(CPANDIR) && del /s *.def Makefile Makefile.old
1249 -del /s ..\utils\Makefile
1250 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1251 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1252 -if exist pod2htmd.tmp del pod2htmd.tmp
1253 -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
1254 -del /f ..\t\test_state
1255
1256install : all installbare installhtml
1257
1258installbare : utils ..\pod\perltoc.pod
1259 $(PERLEXE) ..\installperl
1260 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\$(NULL)
1261 if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\$(NULL)
1262 $(XCOPY) $(GLOBEXE) $(INST_BIN)\$(NULL)
1263 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\$(NULL)
1264 $(XCOPY) "bin\*.bat" $(INST_SCRIPT)\$(NULL)
1265
1266installhtml : doc
1267 $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\$(NULL)
1268
1269inst_lib : $(CONFIGPM)
1270 $(RCOPY) ..\lib $(INST_LIB)\$(NULL)
1271
1272$(UNIDATAFILES) ..\pod\perluniprops.pod .UPDATEALL : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables Extensions_nonxs
1273 cd ..\lib\unicore && \
1274 ..\$(MINIPERL) -I.. -I..\..\dist\Cwd\lib -I..\..\dist\Cwd mktables -P ..\..\pod -maketest -makelist -p
1275
1276minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils
1277 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1278 if exist ..\t\perl.exe del /f ..\t\perl.exe
1279 rename ..\t\miniperl.exe perl.exe
1280 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1281 attrib -r "..\t\*.*"
1282 cd ..\t && \
1283 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t opbasic/*.t op/*.t pragma/*.t
1284
1285test-prep : all utils ..\pod\perltoc.pod
1286 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1287 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1288 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1289# If building with gcc versions 4.x.x or greater, then
1290# the GCC helper DLL will also need copied to the test directory.
1291# The name of the dll can change, depending upon which vendor has supplied
1292# your compiler, and upon the values of "x".
1293# libstdc++-6.dll is copied if it exists as it, too, may then be needed.
1294# Without this copying, the op/taint.t test script will fail.
1295 if exist $(CCDLLDIR)\libgcc_s_seh-1.dll $(XCOPY) $(CCDLLDIR)\libgcc_s_seh-1.dll ..\t\$(NULL)
1296 if exist $(CCDLLDIR)\libgcc_s_sjlj-1.dll $(XCOPY) $(CCDLLDIR)\libgcc_s_sjlj-1.dll ..\t\$(NULL)
1297 if exist $(CCDLLDIR)\libgcc_s_dw2-1.dll $(XCOPY) $(CCDLLDIR)\libgcc_s_dw2-1.dll ..\t\$(NULL)
1298 if exist $(CCDLLDIR)\libstdc++-6.dll $(XCOPY) $(CCDLLDIR)\libstdc++-6.dll ..\t\$(NULL)
1299 if exist $(CCDLLDIR)\libwinpthread-1.dll $(XCOPY) $(CCDLLDIR)\libwinpthread-1.dll ..\t\$(NULL)
1300
1301test : test-prep
1302 set PERL_STATIC_EXT=$(STATIC_EXT) && \
1303 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1304
1305test_porting : test-prep
1306 set PERL_STATIC_EXT=$(STATIC_EXT) && \
1307 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) porting\*.t ..\lib\diagnostics.t
1308
1309test-reonly : reonly utils
1310 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1311 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1312 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1313 cd ..\t && \
1314 $(PERLEXE) -I..\lib harness $(OPT) -re \bpat\\/ $(EXTRA) && \
1315 cd ..\win32
1316
1317regen :
1318 cd .. && regen.pl && cd win32
1319
1320test-notty : test-prep
1321 set PERL_STATIC_EXT=$(STATIC_EXT) && \
1322 set PERL_SKIP_TTY_TEST=1 && \
1323 cd ..\t && $(PERLEXE) -I.\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1324
1325_test :
1326 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1327 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1328 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1329 set PERL_STATIC_EXT=$(STATIC_EXT) && \
1330 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1331
1332_clean :
1333 -@erase miniperlmain$(o)
1334 -@erase $(MINIPERL)
1335 -@erase perlglob$(o)
1336 -@erase perlmain$(o)
1337 -@erase perlmainst$(o)
342634f3 1338 -@erase /f config.h
1339 -@erase /f ..\git_version.h
1340 -@erase $(GLOBEXE)
1341 -@erase $(PERLEXE)
1342 -@erase $(WPERLEXE)
1343 -@erase $(PERLEXESTATIC)
1344 -@erase $(PERLSTATICLIB)
1345 -@erase $(PERLDLL)
1346 -@erase $(CORE_OBJ)
1347 -@erase $(GENUUDMAP) $(GENUUDMAP_OBJ) $(GENERATED_HEADERS)
1348 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1349 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1350 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1351 -@erase $(UNIDATAFILES)
1352 -@erase $(WIN32_OBJ)
1353 -@erase $(DLL_OBJ)
1354 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1355 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1356 -@erase *.ilk
1357 -@erase *.pdb
1358 -@erase Extensions_static
1359
1360clean : Extensions_clean _clean
1361
1362realclean : Extensions_realclean _clean
1363
1364# Handy way to run perlbug -ok without having to install and run the
1365# installed perlbug. We don't re-run the tests here - we trust the user.
1366# Please *don't* use this unless all tests pass.
1367# If you want to report test failures, use "gmake nok" instead.
1368ok: utils
1369 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1370
1371okfile: utils
1372 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1373
1374nok: utils
1375 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1376
1377nokfile: utils
1378 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok