[perl5.git] / hints / solaris_2.sh

# hints/solaris_2.sh
# Last modified: Mon Jan 29 12:52:28 2001
# Lupe Christoph <lupe@lupe-christoph.de>
# Based on version by:
# Andy Dougherty  <doughera@lafayette.edu>
# Which was based on input from lots of folks, especially
# Dean Roehrich <roehrich@ironwood-fddi.cray.com>
# Additional input from Alan Burlison, Jarkko Hietaniemi,
# and Richard Soderberg.
#
# See README.solaris for additional information.
#
# For consistency with gcc, we do not adopt Sun Marketing's
# removal of the '2.' prefix from the Solaris version number.
# (Configure tries to detect an old fixincludes and needs
# this information.)

# If perl fails tests that involve dynamic loading of extensions, and
# you are using gcc, be sure that you are NOT using GNU as and ld.  One
# way to do that is to invoke Configure with
#
#     sh Configure -Dcc='gcc -B/usr/ccs/bin/'
#
#  (Note that the trailing slash is *required*.)
#  gcc will occasionally emit warnings about "unused prefix", but
#  these ought to be harmless.  See below for more details.

# See man vfork.
usevfork=${usevfork:-false}

# Solaris has secure SUID scripts
d_suidsafe=${d_suidsafe:-define}

# Several people reported problems with perl's malloc, especially
# when use64bitall is defined or when using gcc.
#     http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/2001-01/msg01318.html
#     http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/2001-01/msg00465.html
usemymalloc=${usemymalloc:-false}

# Avoid all libraries in /usr/ucblib.
# /lib is just a symlink to /usr/lib
set `echo $glibpth | sed -e 's@/usr/ucblib@@' -e 's@ /lib @ @'`
glibpth="$*"

# Remove unwanted libraries.  -lucb contains incompatible routines.
# -lld and -lsec don't do anything useful. -lcrypt does not
# really provide anything we need over -lc, so we drop it, too.
# -lmalloc can cause a problem with GNU CC & Solaris.  Specifically,
# libmalloc.a may allocate memory that is only 4 byte aligned, but
# GNU CC on the Sparc assumes that doubles are 8 byte aligned.
# Thanks to  Hallvard B. Furuseth <h.b.furuseth@usit.uio.no>
set `echo " $libswanted " | sed -e 's@ ld @ @' -e 's@ malloc @ @' -e 's@ ucb @ @' -e 's@ sec @ @' -e 's@ crypt @ @'`
libswanted="$*"

# Look for architecture name.  We want to suggest a useful default.
case "$archname" in
'')
    if test -f /usr/bin/arch; then
        archname=`/usr/bin/arch`
    	archname="${archname}-${osname}"
    elif test -f /usr/ucb/arch; then
        archname=`/usr/ucb/arch`
    	archname="${archname}-${osname}"
    fi
    ;;
esac

cat > UU/workshoplibpth.cbu << 'EOCBU'
# This script UU/workshoplibpth.cbu will get 'called-back'
# by other CBUs this script creates.
case "$workshoplibpth_done" in
    '')	if test `uname -p` = "sparc"; then
	case "$use64bitall" in
	    "$define"|true|[yY]*)
		# add SPARC-specific 64 bit libraries
		loclibpth="$loclibpth /usr/lib/sparcv9"
		if test -n "$workshoplibs"; then
		    loclibpth=`echo $loclibpth | sed -e "s% $workshoplibs%%" `
		    for lib in $workshoplibs; do
			# Logically, it should be sparcv9.
			# But the reality fights back, it's v9.
			loclibpth="$loclibpth $lib/sparcv9 $lib/v9"
		    done
		fi
	    ;;
	*)  loclibpth="$loclibpth $workshoplibs"
	    ;;
	esac
	else
	    loclibpth="$loclibpth $workshoplibs"
	fi
	workshoplibpth_done="$define"
	;;
esac
EOCBU

######################################################
# General sanity testing.  See below for excerpts from the Solaris FAQ.
#
# From roehrich@ironwood-fddi.cray.com Wed Sep 27 12:51:46 1995
# Date: Thu, 7 Sep 1995 16:31:40 -0500
# From: Dean Roehrich <roehrich@ironwood-fddi.cray.com>
# To: perl5-porters@africa.nicoh.com
# Subject: Re: On perl5/solaris/gcc
#
# Here's another draft of the perl5/solaris/gcc sanity-checker.

case `type ${cc:-cc}` in
*/usr/ucb/cc*) cat <<END >&4

NOTE:  Some people have reported problems with /usr/ucb/cc.
If you have difficulties, please make sure the directory
containing your C compiler is before /usr/ucb in your PATH.

END
;;
esac


# Check that /dev/fd is mounted.  If it is not mounted, let the
# user know that suid scripts may not work.
df /dev/fd 2>&1 > /dev/null
case $? in
0) ;;
*)
	cat <<END >&4

NOTE: Your system does not have /dev/fd mounted.  If you want to
be able to use set-uid scripts you must ask your system administrator
to mount /dev/fd.

END
	;;
esac


# See if libucb can be found in /usr/lib.  If it is, warn the user
# that this may cause problems while building Perl extensions.
/usr/bin/ls /usr/lib/libucb* >/dev/null 2>&1
case $? in
0)
	cat <<END >&4

NOTE: libucb has been found in /usr/lib.  libucb should reside in
/usr/ucblib.  You may have trouble while building Perl extensions.

END
;;
esac

# Use shell built-in 'type' command instead of /usr/bin/which to
# avoid possible csh start-up problems and also to use the same shell
# we'll be using to Configure and make perl.
# The path name is the last field in the output, but the type command
# has an annoying array of possible outputs, e.g.:
#	make is hashed (/opt/gnu/bin/make)
# 	cc is /usr/ucb/cc
#	foo not found
# use a command like type make | awk '{print $NF}' | sed 's/[()]//g'

# See if make(1) is GNU make(1).
# If it is, make sure the setgid bit is not set.
make -v > make.vers 2>&1
if grep GNU make.vers > /dev/null 2>&1; then
    tmp=`type make | awk '{print $NF}' | sed 's/[()]//g'`
    case "`/usr/bin/ls -lL $tmp`" in
    ??????s*)
	    cat <<END >&2

NOTE: Your PATH points to GNU make, and your GNU make has the set-group-id
bit set.  You must either rearrange your PATH to put /usr/ccs/bin before the
GNU utilities or you must ask your system administrator to disable the
set-group-id bit on GNU make.

END
	    ;;
    esac
fi
rm -f make.vers

cat > UU/cc.cbu <<'EOCBU'
# This script UU/cc.cbu will get 'called-back' by Configure after it
# has prompted the user for the C compiler to use.

# If the C compiler is gcc:
#   - check the fixed-includes
#   - check as(1) and ld(1), they should not be GNU
#	(GNU as and ld 2.8.1 and later are reportedly ok, however.)
# If the C compiler is not gcc:
#   - Check if it is the Workshop/Forte compiler.
#     If it is, prepare for 64 bit and long doubles.
#   - check as(1) and ld(1), they should not be GNU
#	(GNU as and ld 2.8.1 and later are reportedly ok, however.)
#
# Watch out in case they have not set $cc.

# Perl compiled with some combinations of GNU as and ld may not
# be able to perform dynamic loading of extensions.  If you have a
# problem with dynamic loading, be sure that you are using the Solaris
# /usr/ccs/bin/as and /usr/ccs/bin/ld.  You can do that with
#  		sh Configure -Dcc='gcc -B/usr/ccs/bin/'
# (note the trailing slash is required).
# Combinations that are known to work with the following hints:
#
#  gcc-2.7.2, GNU as 2.7, GNU ld 2.7
#  egcs-1.0.3, GNU as 2.9.1 and GNU ld 2.9.1
#	--Andy Dougherty  <doughera@lafayette.edu>
#	Tue Apr 13 17:19:43 EDT 1999

# Get gcc to share its secrets.
echo 'main() { return 0; }' > try.c
	# Indent to avoid propagation to config.sh
	verbose=`${cc:-cc} -v -o try try.c 2>&1`

if echo "$verbose" | grep '^Reading specs from' >/dev/null 2>&1; then
	#
	# Using gcc.
	#

	# See if as(1) is GNU as(1).  GNU as(1) might not work for this job.
	if echo "$verbose" | grep ' /usr/ccs/bin/as ' >/dev/null 2>&1; then
	    :
	else
	    cat <<END >&2

NOTE: You are using GNU as(1).  GNU as(1) might not build Perl.  If you
have trouble, you can use /usr/ccs/bin/as by including -B/usr/ccs/bin/
in your ${cc:-cc} command.  (Note that the trailing "/" is required.)

END
	    # Apparently not needed, at least for as 2.7 and later.
	    # cc="${cc:-cc} -B/usr/ccs/bin/"
	fi

	# See if ld(1) is GNU ld(1).  GNU ld(1) might not work for this job.
	# Recompute $verbose since we may have just changed $cc.
	verbose=`${cc:-cc} -v -o try try.c 2>&1 | grep ld 2>&1`

	if echo "$verbose" | grep ' /usr/ccs/bin/ld ' >/dev/null 2>&1; then
	    # Ok, gcc directly calls the Solaris /usr/ccs/bin/ld.
	    :
	elif echo "$verbose" | grep "ld: Software Generation Utilities" >/dev/null 2>&1; then
	    # Hmm.  gcc doesn't call /usr/ccs/bin/ld directly, but it
	    # does appear to be using it eventually.  egcs-1.0.3's ld
	    # wrapper does this.
	    # All Solaris versions of ld I've seen contain the magic
	    # string used in the grep.
	    :
	else
	    # No evidence yet of /usr/ccs/bin/ld.  Some versions
	    # of egcs's ld wrapper call /usr/ccs/bin/ld in turn but
	    # apparently don't reveal that unless you pass in -V.
	    # (This may all depend on local configurations too.)

	    # Recompute verbose with -Wl,-v to find GNU ld if present
	    verbose=`${cc:-cc} -v -Wl,-v -o try try.c 2>&1 | grep ld 2>&1`

	    myld=`echo $verbose| grep ld | awk '/\/ld/ {print $1}'`
	    # This assumes that gcc's output will not change, and that
	    # /full/path/to/ld will be the first word of the output.
	    # Thus myld is something like /opt/gnu/sparc-sun-solaris2.5/bin/ld

	    # Allow that $myld may be '', due to changes in gcc's output 
	    if ${myld:-ld} -V 2>&1 |
		grep "ld: Software Generation Utilities" >/dev/null 2>&1; then
		# Ok, /usr/ccs/bin/ld eventually does get called.
		:
	    else
		echo "Found GNU ld='$myld'" >&4
		cat <<END >&2

NOTE: You are using GNU ld(1).  GNU ld(1) might not build Perl.  If you
have trouble, you can use /usr/ccs/bin/ld by including -B/usr/ccs/bin/
in your ${cc:-cc} command.  (Note that the trailing "/" is required.)

I will try to use GNU ld by passing in the -Wl,-E flag, but if that
doesn't work, you should use -B/usr/ccs/bin/ instead.

END
		ccdlflags="$ccdlflags -Wl,-E"
		lddlflags="$lddlflags -Wl,-E -G"
	    fi
	fi

else
	#
	# Not using gcc.
	#

	ccversion="`${cc:-cc} -V 2>&1|sed -n -e '1s/^cc: //p'`"
	case "$ccversion" in
	*WorkShop*) ccname=workshop ;;
	*) ccversion='' ;;
	esac

	case "$ccname" in
	workshop)
		cat >try.c <<EOM
#include <sunmath.h>
int main() { return(0); }
EOM
		workshoplibs=`cc -### try.c -lsunmath -o try 2>&1|sed -n '/ -Y /s%.* -Y "P,\(.*\)".*%\1%p'|tr ':' '\n'|grep '/SUNWspro/'`
		. ./workshoplibpth.cbu
	;;
	esac

	# See if as(1) is GNU as(1).  GNU might not work for this job.
	case `as --version < /dev/null 2>&1` in
	*GNU*)
		cat <<END >&2

NOTE: You are using GNU as(1).  GNU as(1) might not build Perl.
You must arrange to use /usr/ccs/bin/as, perhaps by adding /usr/ccs/bin
to the beginning of your PATH.

END
		;;
	esac

	# See if ld(1) is GNU ld(1).  GNU ld(1) might not work for this job.
	# ld --version doesn't properly report itself as a GNU tool,
	# as of ld version 2.6, so we need to be more strict. TWP 9/5/96
	# Sun's ld always emits the "Software Generation Utilities" string.
	if ld -V 2>&1 | grep "ld: Software Generation Utilities" >/dev/null 2>&1; then
	    # Ok, ld is /usr/ccs/bin/ld.
	    :
	else
	    cat <<END >&2

NOTE: You are apparently using GNU ld(1).  GNU ld(1) might not build Perl.
You should arrange to use /usr/ccs/bin/ld, perhaps by adding /usr/ccs/bin
to the beginning of your PATH.

END
	fi

fi

# as --version or ld --version might dump core.
rm -f try try.c
rm -f core

# XXX
EOCBU

cat > UU/usethreads.cbu <<'EOCBU'
# This script UU/usethreads.cbu will get 'called-back' by Configure
# after it has prompted the user for whether to use threads.
case "$usethreads" in
$define|true|[yY]*)
        ccflags="-D_REENTRANT $ccflags"

        # sched_yield is in -lposix4 up to Solaris 2.6, in -lrt starting with Solaris 2.7
	case `uname -r` in
	5.[0-6] | 5.5.1) sched_yield_lib="posix4" ;;
	*) sched_yield_lib="rt";
	esac
        set `echo X "$libswanted "| sed -e "s/ c / $sched_yield_lib pthread c /"`
        shift
        libswanted="$*"

        # On Solaris 2.6 x86 there is a bug with sigsetjmp() and siglongjmp()
        # when linked with the threads library, such that whatever positive
        # value you pass to siglongjmp(), sigsetjmp() returns 1.
        # Thanks to Simon Parsons <S.Parsons@ftel.co.uk> for this report.
        # Sun BugID is 4117946, "sigsetjmp always returns 1 when called by
        # siglongjmp in a MT program". As of 19980622, there is no patch
        # available.
        cat >try.c <<'EOM'
	/* Test for sig(set|long)jmp bug. */
	#include <setjmp.h>

	main()
	{
	    sigjmp_buf env;
	    int ret;

	    ret = sigsetjmp(env, 1);
	    if (ret) { return ret == 2; }
	    siglongjmp(env, 2);
	}
EOM
        if test "`arch`" = i86pc -a `uname -r` = 5.6 && \
           ${cc:-cc} try.c -lpthread >/dev/null 2>&1 && ./a.out; then
 	    d_sigsetjmp=$undef
	    cat << 'EOM' >&2

You will see a *** WHOA THERE!!! ***  message from Configure for
d_sigsetjmp.  Keep the recommended value.  See hints/solaris_2.sh
for more information.

EOM
        fi
	;;
esac
EOCBU

cat > UU/uselargefiles.cbu <<'EOCBU'
# This script UU/uselargefiles.cbu will get 'called-back' by Configure
# after it has prompted the user for whether to use large files.
case "$uselargefiles" in
''|$define|true|[yY]*)

# Keep these in the left margin.
ccflags_uselargefiles="`getconf LFS_CFLAGS 2>/dev/null`"
ldflags_uselargefiles="`getconf LFS_LDFLAGS 2>/dev/null`"
libswanted_uselargefiles="`getconf LFS_LIBS 2>/dev/null|sed -e 's@^-l@@' -e 's@ -l@ @g`"

    ccflags="$ccflags $ccflags_uselargefiles"
    ldflags="$ldflags $ldflags_uselargefiles"
    libswanted="$libswanted $libswanted_uselargefiles"
    ;;
esac
EOCBU

# This is truly a mess.
case "$usemorebits" in
"$define"|true|[yY]*)
	use64bitint="$define"
	uselongdouble="$define"
	;;
esac

if test `uname -p` = "sparc"; then
    cat > UU/use64bitint.cbu <<'EOCBU'
# This script UU/use64bitint.cbu will get 'called-back' by Configure
# after it has prompted the user for whether to use 64 bit integers.
case "$use64bitint" in
"$define"|true|[yY]*)
	    case "`uname -r`" in
	    5.[0-4])
		cat >&4 <<EOM
Solaris `uname -r|sed -e 's/^5\./2./'` does not support 64-bit integers.
You should upgrade to at least Solaris 2.5.
EOM
		exit 1
		;;
	    esac
	    ;;
esac
EOCBU

    cat > UU/use64bitall.cbu <<'EOCBU'
# This script UU/use64bitall.cbu will get 'called-back' by Configure
# after it has prompted the user for whether to be maximally 64 bitty.
case "$use64bitall-$use64bitall_done" in
"$define-"|true-|[yY]*-)
	    case "`uname -r`" in
	    5.[0-6])
		cat >&4 <<EOM
Solaris `uname -r|sed -e 's/^5\./2./'` does not support 64-bit pointers.
You should upgrade to at least Solaris 2.7.
EOM
		exit 1
		;;
	    esac
	    libc='/usr/lib/sparcv9/libc.so'
	    if test ! -f $libc; then
		cat >&4 <<EOM

I do not see the 64-bit libc, $libc.
Cannot continue, aborting.

EOM
		exit 1
	    fi
	    . ./workshoplibpth.cbu
	    case "$cc -v 2>/dev/null" in
	    *gcc*)
		echo 'main() { return 0; }' > try.c
		case "`${cc:-cc} -mcpu=v9 -m64 -S try.c 2>&1 | grep 'm64 is not supported by this configuration'`" in
		*"m64 is not supported"*)
		    cat >&4 <<EOM

Full 64-bit build is not supported by this gcc configuration.
Check http://gcc.gnu.org/ for the latest news of availability
of gcc for 64-bit Sparc.

Cannot continue, aborting.

EOM
		    exit 1
		    ;;
		esac
		ccflags="$ccflags -mcpu=v9 -m64"
		if test X`getconf XBS5_LP64_OFF64_CFLAGS 2>/dev/null` != X; then
		    ccflags="$ccflags -Wa,`getconf XBS5_LP64_OFF64_CFLAGS 2>/dev/null`"
		fi
		# no changes to ld flags, as (according to man ld):
		#
   		# There is no specific option that tells ld to link 64-bit
		# objects; the class of the first object that gets processed
		# by ld determines whether it is to perform a 32-bit or a
		# 64-bit link edit.
		;;
	    *)
		ccflags="$ccflags `getconf XBS5_LP64_OFF64_CFLAGS 2>/dev/null`"
		ldflags="$ldflags `getconf XBS5_LP64_OFF64_LDFLAGS 2>/dev/null`"
		lddlflags="$lddlflags -G `getconf XBS5_LP64_OFF64_LDFLAGS 2>/dev/null`"
		;;
	    esac
	    libscheck='case "`/usr/bin/file $xxx`" in
*64-bit*|*SPARCV9*) ;;
*) xxx=/no/64-bit$xxx ;;
esac'

	    use64bitall_done=yes
	    ;;
esac
EOCBU

    # Actually, we want to run this already now, if so requested,
    # because we need to fix up things right now.
    case "$use64bitall" in
    "$define"|true|[yY]*)
	# CBUs expect to be run in UU
	cd UU; . ./use64bitall.cbu; cd ..
	;;
    esac
fi

cat > UU/uselongdouble.cbu <<'EOCBU'
# This script UU/uselongdouble.cbu will get 'called-back' by Configure
# after it has prompted the user for whether to use long doubles.
case "$uselongdouble" in
"$define"|true|[yY]*)
	if test -f /opt/SUNWspro/lib/libsunmath.so; then
		# Unfortunately libpth has already been set and
		# searched, so we need to add in everything manually.
		libpth="$libpth /opt/SUNWspro/lib"
		libs="$libs -lsunmath"
		ldflags="$ldflags -L/opt/SUNWspro/lib -R/opt/SUNWspro/lib"
		d_sqrtl=define
	else
		cat >&4 <<EOM

The Sun Workshop math library is not installed; therefore I do not
know how to do long doubles, sorry.  I'm disabling the use of long
doubles.
EOM
		uselongdouble="$undef"
	fi
	;;
esac
EOCBU

rm -f try.c try.o try a.out
Commit	Line	Data
bc1ad331	1	# hints/solaris_2.sh
83bd2f30	2	# Last modified: Mon Jan 29 12:52:28 2001
73ad924b LC	3	# Lupe Christoph <lupe@lupe-christoph.de>
73ad924b LC	4	# Based on version by:
bc1ad331	5	# Andy Dougherty <doughera@lafayette.edu>
73ad924b	6	# Which was based on input from lots of folks, especially
bc1ad331	7	# Dean Roehrich <roehrich@ironwood-fddi.cray.com>
73ad924b LC	8	# Additional input from Alan Burlison, Jarkko Hietaniemi,
73ad924b LC	9	# and Richard Soderberg.
d420ca49 AD	10	#
	11	# See README.solaris for additional information.
	12	#
73ad924b LC	13	# For consistency with gcc, we do not adopt Sun Marketing's
	14	# removal of the '2.' prefix from the Solaris version number.
	15	# (Configure tries to detect an old fixincludes and needs
	16	# this information.)
	17
bc1ad331 JH	18	# If perl fails tests that involve dynamic loading of extensions, and
	19	# you are using gcc, be sure that you are NOT using GNU as and ld. One
	20	# way to do that is to invoke Configure with
73ad924b	21	#
bc1ad331 JH	22	# sh Configure -Dcc='gcc -B/usr/ccs/bin/'
	23	#
	24	# (Note that the trailing slash is required.)
	25	# gcc will occasionally emit warnings about "unused prefix", but
	26	# these ought to be harmless. See below for more details.
73ad924b	27
bc1ad331	28	# See man vfork.
83bd2f30	29	usevfork=${usevfork:-false}
bc1ad331	30
83bd2f30 LC	31	# Solaris has secure SUID scripts
	32	d_suidsafe=${d_suidsafe:-define}
	33
	34	# Several people reported problems with perl's malloc, especially
	35	# when use64bitall is defined or when using gcc.
	36	# http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/2001-01/msg01318.html
	37	# http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/2001-01/msg00465.html
	38	usemymalloc=${usemymalloc:-false}
bc1ad331 JH	39
bc1ad331 JH	40	# Avoid all libraries in /usr/ucblib.
73ad924b LC	41	# /lib is just a symlink to /usr/lib
73ad924b LC	42	set `echo $glibpth \| sed -e 's@/usr/ucblib@@' -e 's@ /lib @ @'`
bc1ad331 JH	43	glibpth="$*"
bc1ad331 JH	44
73ad924b LC	45	# Remove unwanted libraries. -lucb contains incompatible routines.
	46	# -lld and -lsec don't do anything useful. -lcrypt does not
	47	# really provide anything we need over -lc, so we drop it, too.
bc1ad331 JH	48	# -lmalloc can cause a problem with GNU CC & Solaris. Specifically,
	49	# libmalloc.a may allocate memory that is only 4 byte aligned, but
	50	# GNU CC on the Sparc assumes that doubles are 8 byte aligned.
	51	# Thanks to Hallvard B. Furuseth <h.b.furuseth@usit.uio.no>
73ad924b	52	set `echo " $libswanted " \| sed -e 's@ ld @ @' -e 's@ malloc @ @' -e 's@ ucb @ @' -e 's@ sec @ @' -e 's@ crypt @ @'`
bc1ad331 JH	53	libswanted="$*"
bc1ad331 JH	54
b1db1e90	55	# Look for architecture name. We want to suggest a useful default.
a0d0e21e LW	56	case "$archname" in
	57	'')
	58	if test -f /usr/bin/arch; then
	59	archname=`/usr/bin/arch`
	60	archname="${archname}-${osname}"
	61	elif test -f /usr/ucb/arch; then
	62	archname=`/usr/ucb/arch`
	63	archname="${archname}-${osname}"
	64	fi
	65	;;
	66	esac
a0d0e21e	67
73ad924b LC	68	cat > UU/workshoplibpth.cbu << 'EOCBU'
	69	# This script UU/workshoplibpth.cbu will get 'called-back'
	70	# by other CBUs this script creates.
da8f3004	71	case "$workshoplibpth_done" in
73ad924b LC	72	'') if test `uname -p` = "sparc"; then
	73	case "$use64bitall" in
	74	"$define"\|true\|[yY]*)
	75	# add SPARC-specific 64 bit libraries
	76	loclibpth="$loclibpth /usr/lib/sparcv9"
	77	if test -n "$workshoplibs"; then
	78	loclibpth=`echo $loclibpth \| sed -e "s% $workshoplibs%%" `
	79	for lib in $workshoplibs; do
	80	# Logically, it should be sparcv9.
	81	# But the reality fights back, it's v9.
	82	loclibpth="$loclibpth $lib/sparcv9 $lib/v9"
	83	done
	84	fi
da8f3004	85	;;
73ad924b	86	*) loclibpth="$loclibpth $workshoplibs"
da8f3004 JH	87	;;
da8f3004 JH	88	esac
73ad924b LC	89	else
	90	loclibpth="$loclibpth $workshoplibs"
	91	fi
da8f3004 JH	92	workshoplibpth_done="$define"
	93	;;
	94	esac
	95	EOCBU
	96
da8f3004 JH	97	######################################################
	98	# General sanity testing. See below for excerpts from the Solaris FAQ.
	99	#
	100	# From roehrich@ironwood-fddi.cray.com Wed Sep 27 12:51:46 1995
	101	# Date: Thu, 7 Sep 1995 16:31:40 -0500
	102	# From: Dean Roehrich <roehrich@ironwood-fddi.cray.com>
	103	# To: perl5-porters@africa.nicoh.com
	104	# Subject: Re: On perl5/solaris/gcc
	105	#
73ad924b	106	# Here's another draft of the perl5/solaris/gcc sanity-checker.
da8f3004	107
bd89102f AD	108	case `type ${cc:-cc}` in
bd89102f AD	109	/usr/ucb/cc) cat <<END >&4
8e07c86e	110
73ad924b	111	NOTE: Some people have reported problems with /usr/ucb/cc.
bd89102f AD	112	If you have difficulties, please make sure the directory
bd89102f AD	113	containing your C compiler is before /usr/ucb in your PATH.
8e07c86e AD	114
	115	END
	116	;;
	117	esac
	118
	119
	120	# Check that /dev/fd is mounted. If it is not mounted, let the
	121	# user know that suid scripts may not work.
d0aa90f6	122	df /dev/fd 2>&1 > /dev/null
8e07c86e AD	123	case $? in
	124	0) ;;
	125	*)
68dc0745	126	cat <<END >&4
8e07c86e AD	127
	128	NOTE: Your system does not have /dev/fd mounted. If you want to
	129	be able to use set-uid scripts you must ask your system administrator
	130	to mount /dev/fd.
	131
	132	END
	133	;;
	134	esac
	135
	136
	137	# See if libucb can be found in /usr/lib. If it is, warn the user
	138	# that this may cause problems while building Perl extensions.
	139	/usr/bin/ls /usr/lib/libucb* >/dev/null 2>&1
	140	case $? in
	141	0)
68dc0745	142	cat <<END >&4
8e07c86e AD	143
	144	NOTE: libucb has been found in /usr/lib. libucb should reside in
	145	/usr/ucblib. You may have trouble while building Perl extensions.
	146
a0d0e21e LW	147	END
	148	;;
	149	esac
40000a8c	150
bd89102f AD	151	# Use shell built-in 'type' command instead of /usr/bin/which to
	152	# avoid possible csh start-up problems and also to use the same shell
	153	# we'll be using to Configure and make perl.
	154	# The path name is the last field in the output, but the type command
	155	# has an annoying array of possible outputs, e.g.:
	156	# make is hashed (/opt/gnu/bin/make)
	157	# cc is /usr/ucb/cc
	158	# foo not found
	159	# use a command like type make \| awk '{print $NF}' \| sed 's/[()]//g'
8e07c86e AD	160
	161	# See if make(1) is GNU make(1).
	162	# If it is, make sure the setgid bit is not set.
	163	make -v > make.vers 2>&1
	164	if grep GNU make.vers > /dev/null 2>&1; then
bd89102f AD	165	tmp=`type make \| awk '{print $NF}' \| sed 's/[()]//g'`
bd89102f AD	166	case "`/usr/bin/ls -lL $tmp`" in
8e07c86e	167	??????s*)
68dc0745	168	cat <<END >&2
73ad924b	169
8e07c86e AD	170	NOTE: Your PATH points to GNU make, and your GNU make has the set-group-id
	171	bit set. You must either rearrange your PATH to put /usr/ccs/bin before the
	172	GNU utilities or you must ask your system administrator to disable the
	173	set-group-id bit on GNU make.
	174
	175	END
	176	;;
	177	esac
	178	fi
	179	rm -f make.vers
	180
73ad924b LC	181	cat > UU/cc.cbu <<'EOCBU'
	182	# This script UU/cc.cbu will get 'called-back' by Configure after it
	183	# has prompted the user for the C compiler to use.
	184
8e07c86e AD	185	# If the C compiler is gcc:
	186	# - check the fixed-includes
	187	# - check as(1) and ld(1), they should not be GNU
bd89102f	188	# (GNU as and ld 2.8.1 and later are reportedly ok, however.)
8e07c86e	189	# If the C compiler is not gcc:
73ad924b LC	190	# - Check if it is the Workshop/Forte compiler.
73ad924b LC	191	# If it is, prepare for 64 bit and long doubles.
8e07c86e	192	# - check as(1) and ld(1), they should not be GNU
bd89102f	193	# (GNU as and ld 2.8.1 and later are reportedly ok, however.)
8e07c86e AD	194	#
8e07c86e AD	195	# Watch out in case they have not set $cc.
1acf53c5	196
73ad924b	197	# Perl compiled with some combinations of GNU as and ld may not
e766ed8d AD	198	# be able to perform dynamic loading of extensions. If you have a
	199	# problem with dynamic loading, be sure that you are using the Solaris
	200	# /usr/ccs/bin/as and /usr/ccs/bin/ld. You can do that with
	201	# sh Configure -Dcc='gcc -B/usr/ccs/bin/'
73ad924b	202	# (note the trailing slash is required).
e766ed8d AD	203	# Combinations that are known to work with the following hints:
	204	#
	205	# gcc-2.7.2, GNU as 2.7, GNU ld 2.7
	206	# egcs-1.0.3, GNU as 2.9.1 and GNU ld 2.9.1
73ad924b	207	# --Andy Dougherty <doughera@lafayette.edu>
e766ed8d AD	208	# Tue Apr 13 17:19:43 EDT 1999
e766ed8d AD	209
1acf53c5 SZ	210	# Get gcc to share its secrets.
1acf53c5 SZ	211	echo 'main() { return 0; }' > try.c
bd89102f AD	212	# Indent to avoid propagation to config.sh
bd89102f AD	213	verbose=`${cc:-cc} -v -o try try.c 2>&1`
1acf53c5 SZ	214
1acf53c5 SZ	215	if echo "$verbose" \| grep '^Reading specs from' >/dev/null 2>&1; then
8e07c86e AD	216	#
	217	# Using gcc.
	218	#
8e07c86e	219
e766ed8d	220	# See if as(1) is GNU as(1). GNU as(1) might not work for this job.
1acf53c5 SZ	221	if echo "$verbose" \| grep ' /usr/ccs/bin/as ' >/dev/null 2>&1; then
	222	:
	223	else
68dc0745	224	cat <<END >&2
8e07c86e	225
e766ed8d AD	226	NOTE: You are using GNU as(1). GNU as(1) might not build Perl. If you
e766ed8d AD	227	have trouble, you can use /usr/ccs/bin/as by including -B/usr/ccs/bin/
bd89102f	228	in your ${cc:-cc} command. (Note that the trailing "/" is required.)
8e07c86e AD	229
8e07c86e AD	230	END
e766ed8d AD	231	# Apparently not needed, at least for as 2.7 and later.
e766ed8d AD	232	# cc="${cc:-cc} -B/usr/ccs/bin/"
1acf53c5	233	fi
8e07c86e	234
e766ed8d	235	# See if ld(1) is GNU ld(1). GNU ld(1) might not work for this job.
bd89102f	236	# Recompute $verbose since we may have just changed $cc.
d5fdf557	237	verbose=`${cc:-cc} -v -o try try.c 2>&1 \| grep ld 2>&1`
e766ed8d	238
bd89102f	239	if echo "$verbose" \| grep ' /usr/ccs/bin/ld ' >/dev/null 2>&1; then
e766ed8d AD	240	# Ok, gcc directly calls the Solaris /usr/ccs/bin/ld.
	241	:
	242	elif echo "$verbose" \| grep "ld: Software Generation Utilities" >/dev/null 2>&1; then
	243	# Hmm. gcc doesn't call /usr/ccs/bin/ld directly, but it
	244	# does appear to be using it eventually. egcs-1.0.3's ld
	245	# wrapper does this.
	246	# All Solaris versions of ld I've seen contain the magic
	247	# string used in the grep.
1acf53c5 SZ	248	:
1acf53c5 SZ	249	else
e766ed8d AD	250	# No evidence yet of /usr/ccs/bin/ld. Some versions
	251	# of egcs's ld wrapper call /usr/ccs/bin/ld in turn but
	252	# apparently don't reveal that unless you pass in -V.
	253	# (This may all depend on local configurations too.)
d5fdf557	254
c4a5d551 RB	255	# Recompute verbose with -Wl,-v to find GNU ld if present
	256	verbose=`${cc:-cc} -v -Wl,-v -o try try.c 2>&1 \| grep ld 2>&1`
	257
d5fdf557	258	myld=`echo $verbose\| grep ld \| awk '/\/ld/ {print $1}'`
e766ed8d AD	259	# This assumes that gcc's output will not change, and that
e766ed8d AD	260	# /full/path/to/ld will be the first word of the output.
c4a5d551	261	# Thus myld is something like /opt/gnu/sparc-sun-solaris2.5/bin/ld
e766ed8d	262
c4a5d551 RB	263	# Allow that $myld may be '', due to changes in gcc's output
	264	if ${myld:-ld} -V 2>&1 \|
	265	grep "ld: Software Generation Utilities" >/dev/null 2>&1; then
e766ed8d AD	266	# Ok, /usr/ccs/bin/ld eventually does get called.
	267	:
	268	else
c4a5d551	269	echo "Found GNU ld='$myld'" >&4
e766ed8d	270	cat <<END >&2
8e07c86e	271
e766ed8d AD	272	NOTE: You are using GNU ld(1). GNU ld(1) might not build Perl. If you
e766ed8d AD	273	have trouble, you can use /usr/ccs/bin/ld by including -B/usr/ccs/bin/
bd89102f	274	in your ${cc:-cc} command. (Note that the trailing "/" is required.)
8e07c86e	275
e766ed8d AD	276	I will try to use GNU ld by passing in the -Wl,-E flag, but if that
	277	doesn't work, you should use -B/usr/ccs/bin/ instead.
	278
8e07c86e	279	END
e766ed8d	280	ccdlflags="$ccdlflags -Wl,-E"
74144837	281	lddlflags="$lddlflags -Wl,-E -G"
e766ed8d	282	fi
1acf53c5	283	fi
8e07c86e	284
1acf53c5	285	else
8e07c86e AD	286	#
	287	# Not using gcc.
	288	#
8e07c86e	289
73ad924b LC	290	ccversion="`${cc:-cc} -V 2>&1\|sed -n -e '1s/^cc: //p'`"
	291	case "$ccversion" in
	292	WorkShop) ccname=workshop ;;
	293	*) ccversion='' ;;
	294	esac
	295
	296	case "$ccname" in
	297	workshop)
	298	cat >try.c <<EOM
	299	#include <sunmath.h>
	300	int main() { return(0); }
	301	EOM
	302	workshoplibs=`cc -### try.c -lsunmath -o try 2>&1\|sed -n '/ -Y /s%.* -Y "P,\(.\)".%\1%p'\|tr ':' '\n'\|grep '/SUNWspro/'`
	303	. ./workshoplibpth.cbu
	304	;;
	305	esac
	306
e766ed8d	307	# See if as(1) is GNU as(1). GNU might not work for this job.
8e07c86e AD	308	case `as --version < /dev/null 2>&1` in
8e07c86e AD	309	GNU)
68dc0745	310	cat <<END >&2
8e07c86e	311
e766ed8d	312	NOTE: You are using GNU as(1). GNU as(1) might not build Perl.
bd89102f AD	313	You must arrange to use /usr/ccs/bin/as, perhaps by adding /usr/ccs/bin
bd89102f AD	314	to the beginning of your PATH.
8e07c86e AD	315
	316	END
	317	;;
	318	esac
	319
e766ed8d	320	# See if ld(1) is GNU ld(1). GNU ld(1) might not work for this job.
91d1e749	321	# ld --version doesn't properly report itself as a GNU tool,
91d1e749	322	# as of ld version 2.6, so we need to be more strict. TWP 9/5/96
604c6cff AD	323	# Sun's ld always emits the "Software Generation Utilities" string.
	324	if ld -V 2>&1 \| grep "ld: Software Generation Utilities" >/dev/null 2>&1; then
	325	# Ok, ld is /usr/ccs/bin/ld.
	326	:
91d1e749	327	else
604c6cff	328	cat <<END >&2
8e07c86e	329
e766ed8d AD	330	NOTE: You are apparently using GNU ld(1). GNU ld(1) might not build Perl.
e766ed8d AD	331	You should arrange to use /usr/ccs/bin/ld, perhaps by adding /usr/ccs/bin
bd89102f	332	to the beginning of your PATH.
8e07c86e AD	333
8e07c86e AD	334	END
91d1e749	335	fi
8e07c86e	336
1acf53c5	337	fi
8e07c86e AD	338
8e07c86e AD	339	# as --version or ld --version might dump core.
bd89102f	340	rm -f try try.c
8e07c86e AD	341	rm -f core
8e07c86e AD	342
693762b4	343	# XXX
73ad924b	344	EOCBU
693762b4	345
de6124c8	346	cat > UU/usethreads.cbu <<'EOCBU'
73ad924b	347	# This script UU/usethreads.cbu will get 'called-back' by Configure
104d25b7	348	# after it has prompted the user for whether to use threads.
104d25b7 JH	349	case "$usethreads" in
104d25b7 JH	350	$define\|true\|[yY]*)
104d25b7 JH	351	ccflags="-D_REENTRANT $ccflags"
104d25b7 JH	352
73ad924b	353	# sched_yield is in -lposix4 up to Solaris 2.6, in -lrt starting with Solaris 2.7
7bd161a1 LC	354	case `uname -r` in
	355	5.[0-6] \| 5.5.1) sched_yield_lib="posix4" ;;
	356	*) sched_yield_lib="rt";
	357	esac
	358	set `echo X "$libswanted "\| sed -e "s/ c / $sched_yield_lib pthread c /"`
104d25b7 JH	359	shift
	360	libswanted="$*"
	361
	362	# On Solaris 2.6 x86 there is a bug with sigsetjmp() and siglongjmp()
	363	# when linked with the threads library, such that whatever positive
	364	# value you pass to siglongjmp(), sigsetjmp() returns 1.
	365	# Thanks to Simon Parsons <S.Parsons@ftel.co.uk> for this report.
	366	# Sun BugID is 4117946, "sigsetjmp always returns 1 when called by
	367	# siglongjmp in a MT program". As of 19980622, there is no patch
	368	# available.
	369	cat >try.c <<'EOM'
	370	/* Test for sig(set\|long)jmp bug. */
	371	#include <setjmp.h>
73ad924b	372
104d25b7 JH	373	main()
	374	{
	375	sigjmp_buf env;
	376	int ret;
73ad924b	377
104d25b7 JH	378	ret = sigsetjmp(env, 1);
	379	if (ret) { return ret == 2; }
	380	siglongjmp(env, 2);
	381	}
	382	EOM
7bd161a1	383	if test "`arch`" = i86pc -a `uname -r` = 5.6 && \
104d25b7 JH	384	${cc:-cc} try.c -lpthread >/dev/null 2>&1 && ./a.out; then
	385	d_sigsetjmp=$undef
	386	cat << 'EOM' >&2
	387
	388	You will see a * WHOA THERE!!! * message from Configure for
	389	d_sigsetjmp. Keep the recommended value. See hints/solaris_2.sh
	390	for more information.
	391
	392	EOM
	393	fi
6e4796bd	394	;;
123f9af1	395	esac
104d25b7 JH	396	EOCBU
104d25b7 JH	397
923fc586	398	cat > UU/uselargefiles.cbu <<'EOCBU'
73ad924b	399	# This script UU/uselargefiles.cbu will get 'called-back' by Configure
5fce3f1f	400	# after it has prompted the user for whether to use large files.
bd9b35c9	401	case "$uselargefiles" in
10cc9d2a	402	''\|$define\|true\|[yY]*)
9422c00b JH	403
9422c00b JH	404	# Keep these in the left margin.
45c9e83b JH	405	ccflags_uselargefiles="`getconf LFS_CFLAGS 2>/dev/null`"
	406	ldflags_uselargefiles="`getconf LFS_LDFLAGS 2>/dev/null`"
	407	libswanted_uselargefiles="`getconf LFS_LIBS 2>/dev/null\|sed -e 's@^-l@@' -e 's@ -l@ @g`"
9422c00b	408
45c9e83b JH	409	ccflags="$ccflags $ccflags_uselargefiles"
	410	ldflags="$ldflags $ldflags_uselargefiles"
	411	libswanted="$libswanted $libswanted_uselargefiles"
6f587e79	412	;;
bd9b35c9	413	esac
5fce3f1f	414	EOCBU
6b8eaf93	415
2f4ff158 JH	416	# This is truly a mess.
	417	case "$usemorebits" in
	418	"$define"\|true\|[yY]*)
73ad924b LC	419	use64bitint="$define"
73ad924b LC	420	uselongdouble="$define"
2f4ff158 JH	421	;;
	422	esac
	423
73ad924b LC	424	if test `uname -p` = "sparc"; then
	425	cat > UU/use64bitint.cbu <<'EOCBU'
	426	# This script UU/use64bitint.cbu will get 'called-back' by Configure
	427	# after it has prompted the user for whether to use 64 bit integers.
	428	case "$use64bitint" in
	429	"$define"\|true\|[yY]*)
	430	case "`uname -r`" in
	431	5.[0-4])
	432	cat >&4 <<EOM
	433	Solaris `uname -r\|sed -e 's/^5\./2./'` does not support 64-bit integers.
	434	You should upgrade to at least Solaris 2.5.
	435	EOM
	436	exit 1
	437	;;
	438	esac
	439	;;
	440	esac
	441	EOCBU
	442
	443	cat > UU/use64bitall.cbu <<'EOCBU'
	444	# This script UU/use64bitall.cbu will get 'called-back' by Configure
c4eb8127 JH	445	# after it has prompted the user for whether to be maximally 64 bitty.
	446	case "$use64bitall-$use64bitall_done" in
	447	"$define-"\|true-\|[yY]*-)
104d25b7	448	case "`uname -r`" in
73ad924b	449	5.[0-6])
104d25b7	450	cat >&4 <<EOM
73ad924b LC	451	Solaris `uname -r\|sed -e 's/^5\./2./'` does not support 64-bit pointers.
73ad924b LC	452	You should upgrade to at least Solaris 2.7.
104d25b7 JH	453	EOM
	454	exit 1
	455	;;
	456	esac
282f2f4c JH	457	libc='/usr/lib/sparcv9/libc.so'
282f2f4c JH	458	if test ! -f $libc; then
9b119d5a	459	cat >&4 <<EOM
282f2f4c JH	460
	461	I do not see the 64-bit libc, $libc.
	462	Cannot continue, aborting.
	463
	464	EOM
	465	exit 1
e6f120fa	466	fi
73ad924b	467	. ./workshoplibpth.cbu
4c07fe1d JH	468	case "$cc -v 2>/dev/null" in
4c07fe1d JH	469	gcc)
9b119d5a	470	echo 'main() { return 0; }' > try.c
9636b992 CT	471	case "`${cc:-cc} -mcpu=v9 -m64 -S try.c 2>&1 \| grep 'm64 is not supported by this configuration'`" in
9636b992 CT	472	"m64 is not supported")
9b119d5a RB	473	cat >&4 <<EOM
9b119d5a RB	474
e6f120fa JH	475	Full 64-bit build is not supported by this gcc configuration.
	476	Check http://gcc.gnu.org/ for the latest news of availability
	477	of gcc for 64-bit Sparc.
	478
9b119d5a RB	479	Cannot continue, aborting.
	480
	481	EOM
	482	exit 1
9636b992	483	;;
73ad924b	484	esac
9b119d5a RB	485	ccflags="$ccflags -mcpu=v9 -m64"
	486	if test X`getconf XBS5_LP64_OFF64_CFLAGS 2>/dev/null` != X; then
	487	ccflags="$ccflags -Wa,`getconf XBS5_LP64_OFF64_CFLAGS 2>/dev/null`"
	488	fi
	489	# no changes to ld flags, as (according to man ld):
	490	#
	491	# There is no specific option that tells ld to link 64-bit
	492	# objects; the class of the first object that gets processed
	493	# by ld determines whether it is to perform a 32-bit or a
	494	# 64-bit link edit.
4c07fe1d JH	495	;;
4c07fe1d JH	496	*)
0d926123	497	ccflags="$ccflags `getconf XBS5_LP64_OFF64_CFLAGS 2>/dev/null`"
923fc586	498	ldflags="$ldflags `getconf XBS5_LP64_OFF64_LDFLAGS 2>/dev/null`"
0d926123	499	lddlflags="$lddlflags -G `getconf XBS5_LP64_OFF64_LDFLAGS 2>/dev/null`"
4c07fe1d	500	;;
73ad924b	501	esac
b1b472cb	502	libscheck='case "`/usr/bin/file $xxx`" in
7b65db70 JH	503	64-bit\|SPARCV9) ;;
	504	*) xxx=/no/64-bit$xxx ;;
	505	esac'
5ae8d7b4	506
e9a51be3	507	use64bitall_done=yes
6f587e79 JH	508	;;
6f587e79 JH	509	esac
4c07fe1d	510	EOCBU
73ad924b LC	511
	512	# Actually, we want to run this already now, if so requested,
	513	# because we need to fix up things right now.
	514	case "$use64bitall" in
	515	"$define"\|true\|[yY]*)
	516	# CBUs expect to be run in UU
	517	cd UU; . ./use64bitall.cbu; cd ..
631e9f25	518	;;
73ad924b LC	519	esac
73ad924b LC	520	fi
b0ca24c6	521
923fc586	522	cat > UU/uselongdouble.cbu <<'EOCBU'
73ad924b	523	# This script UU/uselongdouble.cbu will get 'called-back' by Configure
923fc586	524	# after it has prompted the user for whether to use long doubles.
e9a51be3 JH	525	case "$uselongdouble" in
e9a51be3 JH	526	"$define"\|true\|[yY]*)
73ad924b	527	if test -f /opt/SUNWspro/lib/libsunmath.so; then
6d707089 AD	528	# Unfortunately libpth has already been set and
	529	# searched, so we need to add in everything manually.
	530	libpth="$libpth /opt/SUNWspro/lib"
73ad924b LC	531	libs="$libs -lsunmath"
	532	ldflags="$ldflags -L/opt/SUNWspro/lib -R/opt/SUNWspro/lib"
	533	d_sqrtl=define
8364ae4d	534	else
73ad924b LC	535	cat >&4 <<EOM
	536
	537	The Sun Workshop math library is not installed; therefore I do not
	538	know how to do long doubles, sorry. I'm disabling the use of long
	539	doubles.
	540	EOM
	541	uselongdouble="$undef"
8364ae4d	542	fi
e9a51be3 JH	543	;;
e9a51be3 JH	544	esac
73ad924b	545	EOCBU
e9a51be3	546
73ad924b	547	rm -f try.c try.o try a.out