+/* This file (config_H) is a sample config.h file. If you are unable
+ to successfully run Configure, copy this file to config.h and
+ edit it to suit your system.
+*/
/*
* This file was produced by running the config_h.SH script, which
* gets its values from config.sh, which is generally produced by
/*
* Package name : perl5
* Source directory : .
- * Configuration time: Tue Feb 17 15:43:05 CET 2004
- * Configured by : rafael
- * Target system : linux dat 2.4.20 #1 sun dec 1 21:25:14 cet 2002 i686 unknown
+ * Configuration time: Mon Nov 1 15:49:13 CET 2004
+ * Configured by : yourname
+ * Target system : linux lt09 2.6.5-7.111-default #1 wed oct 13 15:45:13 utc 2004 i686 i686 i386 gnulinux
*/
#ifndef _config_h_
/* LOC_SED:
* This symbol holds the complete pathname to the sed program.
*/
-#define LOC_SED "/bin/sed" /**/
+#define LOC_SED "/usr/bin/sed" /**/
/* HAS_ALARM:
* This symbol, if defined, indicates that the alarm routine is
*/
/*#define I_VFORK / **/
-/* INTSIZE:
- * This symbol contains the value of sizeof(int) so that the C
- * preprocessor can make decisions based on it.
- */
-/* LONGSIZE:
- * This symbol contains the value of sizeof(long) so that the C
- * preprocessor can make decisions based on it.
- */
-/* SHORTSIZE:
- * This symbol contains the value of sizeof(short) so that the C
- * preprocessor can make decisions based on it.
- */
-#define INTSIZE 4 /**/
-#define LONGSIZE 4 /**/
-#define SHORTSIZE 2 /**/
-
-/* MULTIARCH:
- * This symbol, if defined, signifies that the build
- * process will produce some binary files that are going to be
- * used in a cross-platform environment. This is the case for
- * example with the NeXT "fat" binaries that contain executables
- * for several CPUs.
- */
-/*#define MULTIARCH / **/
-
-/* HAS_QUAD:
- * This symbol, if defined, tells that there's a 64-bit integer type,
- * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one
- * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T.
- */
-#define HAS_QUAD /**/
-#ifdef HAS_QUAD
-# define Quad_t long long /**/
-# define Uquad_t unsigned long long /**/
-# define QUADKIND 3 /**/
-# define QUAD_IS_INT 1
-# define QUAD_IS_LONG 2
-# define QUAD_IS_LONG_LONG 3
-# define QUAD_IS_INT64_T 4
-#endif
-
/* HAS_ACCESSX:
* This symbol, if defined, indicates that the accessx routine is
* available to do extended access checks.
*/
/*#define I_SYS_SECURITY / **/
+/* OSNAME:
+ * This symbol contains the name of the operating system, as determined
+ * by Configure. You shouldn't rely on it too much; the specific
+ * feature tests from Configure are generally more reliable.
+ */
+/* OSVERS:
+ * This symbol contains the version of the operating system, as determined
+ * by Configure. You shouldn't rely on it too much; the specific
+ * feature tests from Configure are generally more reliable.
+ */
+#define OSNAME "linux" /**/
+#define OSVERS "2.6.5-7.111-default" /**/
+
/* MEM_ALIGNBYTES:
* This symbol contains the number of bytes required to align a
* double, or a long double when applicable. Usual values are 2,
#define MEM_ALIGNBYTES 4
#endif
+/* ARCHLIB:
+ * This variable, if defined, holds the name of the directory in
+ * which the user wants to put architecture-dependent public
+ * library files for perl5. It is most often a local directory
+ * such as /usr/local/lib. Programs using this variable must be
+ * prepared to deal with filename expansion. If ARCHLIB is the
+ * same as PRIVLIB, it is not defined, since presumably the
+ * program already searches PRIVLIB.
+ */
+/* ARCHLIB_EXP:
+ * This symbol contains the ~name expanded version of ARCHLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define ARCHLIB "/opt/perl/lib/5.9.2/i686-linux" /**/
+#define ARCHLIB_EXP "/opt/perl/lib/5.9.2/i686-linux" /**/
+
+/* ARCHNAME:
+ * This symbol holds a string representing the architecture name.
+ * It may be used to construct an architecture-dependant pathname
+ * where library files may be held under a private library, for
+ * instance.
+ */
+#define ARCHNAME "i686-linux" /**/
+
+/* HAS_ATOLF:
+ * This symbol, if defined, indicates that the atolf routine is
+ * available to convert strings into long doubles.
+ */
+/*#define HAS_ATOLF / **/
+
+/* HAS_ATOLL:
+ * This symbol, if defined, indicates that the atoll routine is
+ * available to convert strings into long longs.
+ */
+#define HAS_ATOLL /**/
+
+/* BIN:
+ * This symbol holds the path of the bin directory where the package will
+ * be installed. Program must be prepared to deal with ~name substitution.
+ */
+/* BIN_EXP:
+ * This symbol is the filename expanded version of the BIN symbol, for
+ * programs that do not want to deal with that at run-time.
+ */
+#define BIN "/opt/perl/bin" /**/
+#define BIN_EXP "/opt/perl/bin" /**/
+
/* BYTEORDER:
* This symbol holds the hexadecimal constant defined in byteorder,
* in a UV, i.e. 0x1234 or 0x4321 or 0x12345678, etc...
#define BYTEORDER 0x1234 /* large digits for MSB */
#endif /* NeXT */
+/* CAT2:
+ * This macro concatenates 2 tokens together.
+ */
+/* STRINGIFY:
+ * This macro surrounds its token with double quotes.
+ */
+#if 42 == 1
+#define CAT2(a,b) a/**/b
+#define STRINGIFY(a) "a"
+ /* If you can get stringification with catify, tell me how! */
+#endif
+#if 42 == 42
+#define PeRl_CaTiFy(a, b) a ## b
+#define PeRl_StGiFy(a) #a
+/* the additional level of indirection enables these macros to be
+ * used as arguments to other macros. See K&R 2nd ed., page 231. */
+#define CAT2(a,b) PeRl_CaTiFy(a,b)
+#define StGiFy(a) PeRl_StGiFy(a)
+#define STRINGIFY(a) PeRl_StGiFy(a)
+#endif
+#if 42 != 1 && 42 != 42
+# include "Bletch: How does this C preprocessor concatenate tokens?"
+#endif
+
+/* CPPSTDIN:
+ * This symbol contains the first part of the string which will invoke
+ * the C preprocessor on the standard input and produce to standard
+ * output. Typical value of "cc -E" or "/lib/cpp", but it can also
+ * call a wrapper. See CPPRUN.
+ */
+/* CPPMINUS:
+ * This symbol contains the second part of the string which will invoke
+ * the C preprocessor on the standard input and produce to standard
+ * output. This symbol will have the value "-" if CPPSTDIN needs a minus
+ * to specify standard input, otherwise the value is "".
+ */
+/* CPPRUN:
+ * This symbol contains the string which will invoke a C preprocessor on
+ * the standard input and produce to standard output. It needs to end
+ * with CPPLAST, after all other preprocessor flags have been specified.
+ * The main difference with CPPSTDIN is that this program will never be a
+ * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
+ * available directly to the user. Note that it may well be different from
+ * the preprocessor used to compile the C program.
+ */
+/* CPPLAST:
+ * This symbol is intended to be used along with CPPRUN in the same manner
+ * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "".
+ */
+#define CPPSTDIN "cc -E"
+#define CPPMINUS "-"
+#define CPPRUN "cc -E"
+#define CPPLAST "-"
+
+/* HAS__FWALK:
+ * This symbol, if defined, indicates that the _fwalk system call is
+ * available to apply a function to all the file handles.
+ */
+/*#define HAS__FWALK / **/
+
+/* HAS_ACCESS:
+ * This manifest constant lets the C program know that the access()
+ * system call is available to check for accessibility using real UID/GID.
+ * (always present on UNIX.)
+ */
+#define HAS_ACCESS /**/
+
+/* HAS_ASCTIME_R:
+ * This symbol, if defined, indicates that the asctime_r routine
+ * is available to asctime re-entrantly.
+ */
+/* ASCTIME_R_PROTO:
+ * This symbol encodes the prototype of asctime_r.
+ * It is zero if d_asctime_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_asctime_r
+ * is defined.
+ */
+/*#define HAS_ASCTIME_R / **/
+#define ASCTIME_R_PROTO 0 /**/
+
/* CASTI32:
* This symbol is defined if the C compiler can cast negative
* or large floating point numbers to 32-bit ints.
#define CASTNEGFLOAT /**/
#define CASTFLAGS 0 /**/
+/* HAS_CLASS:
+ * This symbol, if defined, indicates that the class routine is
+ * available to classify doubles. Available for example in AIX.
+ * The returned values are defined in <float.h> and are:
+ *
+ * FP_PLUS_NORM Positive normalized, nonzero
+ * FP_MINUS_NORM Negative normalized, nonzero
+ * FP_PLUS_DENORM Positive denormalized, nonzero
+ * FP_MINUS_DENORM Negative denormalized, nonzero
+ * FP_PLUS_ZERO +0.0
+ * FP_MINUS_ZERO -0.0
+ * FP_PLUS_INF +INF
+ * FP_MINUS_INF -INF
+ * FP_NANS Signaling Not a Number (NaNS)
+ * FP_NANQ Quiet Not a Number (NaNQ)
+ */
+/*#define HAS_CLASS / **/
+
/* VOID_CLOSEDIR:
* This symbol, if defined, indicates that the closedir() routine
* does not return a value.
*/
/*#define VOID_CLOSEDIR / **/
-/* HAS_FD_SET:
- * This symbol, when defined, indicates presence of the fd_set typedef
- * in <sys/types.h>
+/* HAS_STRUCT_CMSGHDR:
+ * This symbol, if defined, indicates that the struct cmsghdr
+ * is supported.
*/
-#define HAS_FD_SET /**/
+#define HAS_STRUCT_CMSGHDR /**/
-/* Gconvert:
- * This preprocessor macro is defined to convert a floating point
- * number to a string without a trailing decimal point. This
- * emulates the behavior of sprintf("%g"), but is sometimes much more
- * efficient. If gconvert() is not available, but gcvt() drops the
- * trailing decimal point, then gcvt() is used. If all else fails,
- * a macro using sprintf("%g") is used. Arguments for the Gconvert
- * macro are: value, number of digits, whether trailing zeros should
- * be retained, and the output buffer.
- * The usual values are:
- * d_Gconvert='gconvert((x),(n),(t),(b))'
- * d_Gconvert='gcvt((x),(n),(b))'
- * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
- * The last two assume trailing zeros should not be kept.
+/* HAS_CRYPT_R:
+ * This symbol, if defined, indicates that the crypt_r routine
+ * is available to crypt re-entrantly.
*/
-#define Gconvert(x,n,t,b) gcvt((x),(n),(b))
-
-/* HAS_GETPAGESIZE:
- * This symbol, if defined, indicates that the getpagesize system call
- * is available to get system page size, which is the granularity of
- * many memory management calls.
+/* CRYPT_R_PROTO:
+ * This symbol encodes the prototype of crypt_r.
+ * It is zero if d_crypt_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_crypt_r
+ * is defined.
*/
-#define HAS_GETPAGESIZE /**/
+/*#define HAS_CRYPT_R / **/
+#define CRYPT_R_PROTO 0 /**/
-/* HAS_GNULIBC:
- * This symbol, if defined, indicates to the C program that
- * the GNU C library is being used. A better check is to use
- * the __GLIBC__ and __GLIBC_MINOR__ symbols supplied with glibc.
+/* HAS_CSH:
+ * This symbol, if defined, indicates that the C-shell exists.
*/
-#define HAS_GNULIBC /**/
-#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
-# define _GNU_SOURCE
-#endif
-/* HAS_ISASCII:
- * This manifest constant lets the C program know that isascii
- * is available.
+/* CSH:
+ * This symbol, if defined, contains the full pathname of csh.
*/
-#define HAS_ISASCII /**/
+#define HAS_CSH /**/
+#ifdef HAS_CSH
+#define CSH "/usr/bin/csh" /**/
+#endif
-/* HAS_LCHOWN:
- * This symbol, if defined, indicates that the lchown routine is
- * available to operate on a symbolic link (instead of following the
- * link).
+/* HAS_CTIME_R:
+ * This symbol, if defined, indicates that the ctime_r routine
+ * is available to ctime re-entrantly.
*/
-#define HAS_LCHOWN /**/
-
-/* HAS_OPEN3:
- * This manifest constant lets the C program know that the three
- * argument form of open(2) is available.
+/* CTIME_R_PROTO:
+ * This symbol encodes the prototype of ctime_r.
+ * It is zero if d_ctime_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ctime_r
+ * is defined.
*/
-#define HAS_OPEN3 /**/
+/*#define HAS_CTIME_R / **/
+#define CTIME_R_PROTO 0 /**/
-/* HAS_SAFE_BCOPY:
- * This symbol, if defined, indicates that the bcopy routine is available
- * to copy potentially overlapping memory blocks. Normally, you should
- * probably use memmove() or memcpy(). If neither is defined, roll your
- * own version.
+/* DLSYM_NEEDS_UNDERSCORE:
+ * This symbol, if defined, indicates that we need to prepend an
+ * underscore to the symbol name before calling dlsym(). This only
+ * makes sense if you *have* dlsym, which we will presume is the
+ * case if you're using dl_dlopen.xs.
*/
-/*#define HAS_SAFE_BCOPY / **/
+/*#define DLSYM_NEEDS_UNDERSCORE / **/
-/* HAS_SAFE_MEMCPY:
- * This symbol, if defined, indicates that the memcpy routine is available
- * to copy potentially overlapping memory blocks. If you need to
- * copy overlapping memory blocks, you should check HAS_MEMMOVE and
- * use memmove() instead, if available.
+/* HAS_DRAND48_R:
+ * This symbol, if defined, indicates that the drand48_r routine
+ * is available to drand48 re-entrantly.
*/
-/*#define HAS_SAFE_MEMCPY / **/
-
-/* HAS_SANE_MEMCMP:
- * This symbol, if defined, indicates that the memcmp routine is available
- * and can be used to compare relative magnitudes of chars with their high
- * bits set. If it is not defined, roll your own version.
+/* DRAND48_R_PROTO:
+ * This symbol encodes the prototype of drand48_r.
+ * It is zero if d_drand48_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_drand48_r
+ * is defined.
*/
-#define HAS_SANE_MEMCMP /**/
+/*#define HAS_DRAND48_R / **/
+#define DRAND48_R_PROTO 0 /**/
-/* HAS_SIGACTION:
- * This symbol, if defined, indicates that Vr4's sigaction() routine
- * is available.
+/* HAS_DRAND48_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the drand48() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern double drand48(void);
*/
-#define HAS_SIGACTION /**/
+#define HAS_DRAND48_PROTO /**/
-/* HAS_SIGSETJMP:
- * This variable indicates to the C program that the sigsetjmp()
- * routine is available to save the calling process's registers
- * and stack environment for later use by siglongjmp(), and
- * to optionally save the process's signal mask. See
- * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
- */
-/* Sigjmp_buf:
- * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
+/* HAS_ENDGRENT:
+ * This symbol, if defined, indicates that the getgrent routine is
+ * available for finalizing sequential access of the group database.
*/
-/* Sigsetjmp:
- * This macro is used in the same way as sigsetjmp(), but will invoke
- * traditional setjmp() if sigsetjmp isn't available.
- * See HAS_SIGSETJMP.
+#define HAS_ENDGRENT /**/
+
+/* HAS_ENDGRENT_R:
+ * This symbol, if defined, indicates that the endgrent_r routine
+ * is available to endgrent re-entrantly.
*/
-/* Siglongjmp:
- * This macro is used in the same way as siglongjmp(), but will invoke
- * traditional longjmp() if siglongjmp isn't available.
- * See HAS_SIGSETJMP.
+/* ENDGRENT_R_PROTO:
+ * This symbol encodes the prototype of endgrent_r.
+ * It is zero if d_endgrent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endgrent_r
+ * is defined.
*/
-#define HAS_SIGSETJMP /**/
-#ifdef HAS_SIGSETJMP
-#define Sigjmp_buf sigjmp_buf
-#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
-#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
-#else
-#define Sigjmp_buf jmp_buf
-#define Sigsetjmp(buf,save_mask) setjmp((buf))
-#define Siglongjmp(buf,retval) longjmp((buf),(retval))
-#endif
+/*#define HAS_ENDGRENT_R / **/
+#define ENDGRENT_R_PROTO 0 /**/
-/* USE_STDIO_PTR:
- * This symbol is defined if the _ptr and _cnt fields (or similar)
- * of the stdio FILE structure can be used to access the stdio buffer
- * for a file handle. If this is defined, then the FILE_ptr(fp)
- * and FILE_cnt(fp) macros will also be defined and should be used
- * to access these fields.
+/* HAS_ENDHOSTENT:
+ * This symbol, if defined, indicates that the endhostent() routine is
+ * available to close whatever was being used for host queries.
*/
-/* FILE_ptr:
- * This macro is used to access the _ptr field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_PTR is defined.
+#define HAS_ENDHOSTENT /**/
+
+/* HAS_ENDNETENT:
+ * This symbol, if defined, indicates that the endnetent() routine is
+ * available to close whatever was being used for network queries.
*/
-/* STDIO_PTR_LVALUE:
- * This symbol is defined if the FILE_ptr macro can be used as an
- * lvalue.
+#define HAS_ENDNETENT /**/
+
+/* HAS_ENDPROTOENT:
+ * This symbol, if defined, indicates that the endprotoent() routine is
+ * available to close whatever was being used for protocol queries.
*/
-/* FILE_cnt:
- * This macro is used to access the _cnt field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_PTR is defined.
+#define HAS_ENDPROTOENT /**/
+
+/* HAS_ENDPWENT:
+ * This symbol, if defined, indicates that the getgrent routine is
+ * available for finalizing sequential access of the passwd database.
*/
-/* STDIO_CNT_LVALUE:
- * This symbol is defined if the FILE_cnt macro can be used as an
- * lvalue.
+#define HAS_ENDPWENT /**/
+
+/* HAS_ENDPWENT_R:
+ * This symbol, if defined, indicates that the endpwent_r routine
+ * is available to endpwent re-entrantly.
*/
-/* STDIO_PTR_LVAL_SETS_CNT:
- * This symbol is defined if using the FILE_ptr macro as an lvalue
- * to increase the pointer by n has the side effect of decreasing the
- * value of File_cnt(fp) by n.
+/* ENDPWENT_R_PROTO:
+ * This symbol encodes the prototype of endpwent_r.
+ * It is zero if d_endpwent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endpwent_r
+ * is defined.
*/
-/* STDIO_PTR_LVAL_NOCHANGE_CNT:
- * This symbol is defined if using the FILE_ptr macro as an lvalue
- * to increase the pointer by n leaves File_cnt(fp) unchanged.
+/*#define HAS_ENDPWENT_R / **/
+#define ENDPWENT_R_PROTO 0 /**/
+
+/* HAS_ENDSERVENT:
+ * This symbol, if defined, indicates that the endservent() routine is
+ * available to close whatever was being used for service queries.
*/
-#define USE_STDIO_PTR /**/
-#ifdef USE_STDIO_PTR
-#define FILE_ptr(fp) ((fp)->_IO_read_ptr)
-#define STDIO_PTR_LVALUE /**/
-#define FILE_cnt(fp) ((fp)->_IO_read_end - (fp)->_IO_read_ptr)
-/*#define STDIO_CNT_LVALUE / **/
-#define STDIO_PTR_LVAL_SETS_CNT /**/
-/*#define STDIO_PTR_LVAL_NOCHANGE_CNT / **/
-#endif
+#define HAS_ENDSERVENT /**/
-/* USE_STDIO_BASE:
- * This symbol is defined if the _base field (or similar) of the
- * stdio FILE structure can be used to access the stdio buffer for
- * a file handle. If this is defined, then the FILE_base(fp) macro
- * will also be defined and should be used to access this field.
- * Also, the FILE_bufsiz(fp) macro will be defined and should be used
- * to determine the number of bytes in the buffer. USE_STDIO_BASE
- * will never be defined unless USE_STDIO_PTR is.
+/* HAS_FCHDIR:
+ * This symbol, if defined, indicates that the fchdir routine is
+ * available to change directory using a file descriptor.
*/
-/* FILE_base:
- * This macro is used to access the _base field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_BASE is defined.
+#define HAS_FCHDIR /**/
+
+/* FCNTL_CAN_LOCK:
+ * This symbol, if defined, indicates that fcntl() can be used
+ * for file locking. Normally on Unix systems this is defined.
+ * It may be undefined on VMS.
*/
-/* FILE_bufsiz:
- * This macro is used to determine the number of bytes in the I/O
- * buffer pointed to by _base field (or equivalent) of the FILE
- * structure pointed to its argument. This macro will always be defined
- * if USE_STDIO_BASE is defined.
+#define FCNTL_CAN_LOCK /**/
+
+/* HAS_FD_SET:
+ * This symbol, when defined, indicates presence of the fd_set typedef
+ * in <sys/types.h>
*/
-#define USE_STDIO_BASE /**/
-#ifdef USE_STDIO_BASE
-#define FILE_base(fp) ((fp)->_IO_read_base)
-#define FILE_bufsiz(fp) ((fp)->_IO_read_end - (fp)->_IO_read_base)
-#endif
+#define HAS_FD_SET /**/
-/* HAS_VPRINTF:
- * This symbol, if defined, indicates that the vprintf routine is available
- * to printf with a pointer to an argument list. If unavailable, you
- * may need to write your own, probably in terms of _doprnt().
+/* HAS_FINITE:
+ * This symbol, if defined, indicates that the finite routine is
+ * available to check whether a double is finite (non-infinity non-NaN).
*/
-/* USE_CHAR_VSPRINTF:
- * This symbol is defined if this system has vsprintf() returning type
- * (char*). The trend seems to be to declare it as "int vsprintf()". It
- * is up to the package author to declare vsprintf correctly based on the
- * symbol.
+#define HAS_FINITE /**/
+
+/* HAS_FINITEL:
+ * This symbol, if defined, indicates that the finitel routine is
+ * available to check whether a long double is finite
+ * (non-infinity non-NaN).
*/
-#define HAS_VPRINTF /**/
-#define USE_CHAR_VSPRINTF /**/
+#define HAS_FINITEL /**/
-/* DOUBLESIZE:
- * This symbol contains the size of a double, so that the C preprocessor
- * can make decisions based on it.
+/* FLEXFILENAMES:
+ * This symbol, if defined, indicates that the system supports filenames
+ * longer than 14 characters.
*/
-#define DOUBLESIZE 8 /**/
+#define FLEXFILENAMES /**/
-/* I_TIME:
- * This symbol, if defined, indicates to the C program that it should
- * include <time.h>.
+/* HAS_FP_CLASS:
+ * This symbol, if defined, indicates that the fp_class routine is
+ * available to classify doubles. Available for example in Digital UNIX.
+ * The returned values are defined in <math.h> and are:
+ *
+ * FP_SNAN Signaling NaN (Not-a-Number)
+ * FP_QNAN Quiet NaN (Not-a-Number)
+ * FP_POS_INF +infinity
+ * FP_NEG_INF -infinity
+ * FP_POS_NORM Positive normalized
+ * FP_NEG_NORM Negative normalized
+ * FP_POS_DENORM Positive denormalized
+ * FP_NEG_DENORM Negative denormalized
+ * FP_POS_ZERO +0.0 (positive zero)
+ * FP_NEG_ZERO -0.0 (negative zero)
*/
-/* I_SYS_TIME:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/time.h>.
- */
-/* I_SYS_TIME_KERNEL:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/time.h> with KERNEL defined.
+/*#define HAS_FP_CLASS / **/
+
+/* HAS_FPCLASS:
+ * This symbol, if defined, indicates that the fpclass routine is
+ * available to classify doubles. Available for example in Solaris/SVR4.
+ * The returned values are defined in <ieeefp.h> and are:
+ *
+ * FP_SNAN signaling NaN
+ * FP_QNAN quiet NaN
+ * FP_NINF negative infinity
+ * FP_PINF positive infinity
+ * FP_NDENORM negative denormalized non-zero
+ * FP_PDENORM positive denormalized non-zero
+ * FP_NZERO negative zero
+ * FP_PZERO positive zero
+ * FP_NNORM negative normalized non-zero
+ * FP_PNORM positive normalized non-zero
*/
-/* HAS_TM_TM_ZONE:
- * This symbol, if defined, indicates to the C program that
- * the struct tm has a tm_zone field.
+/*#define HAS_FPCLASS / **/
+
+/* HAS_FPCLASSIFY:
+ * This symbol, if defined, indicates that the fpclassify routine is
+ * available to classify doubles. Available for example in HP-UX.
+ * The returned values are defined in <math.h> and are
+ *
+ * FP_NORMAL Normalized
+ * FP_ZERO Zero
+ * FP_INFINITE Infinity
+ * FP_SUBNORMAL Denormalized
+ * FP_NAN NaN
+ *
*/
-/* HAS_TM_TM_GMTOFF:
- * This symbol, if defined, indicates to the C program that
- * the struct tm has a tm_gmtoff field.
+/*#define HAS_FPCLASSIFY / **/
+
+/* HAS_FPOS64_T:
+ * This symbol will be defined if the C compiler supports fpos64_t.
*/
-#define I_TIME /**/
-#define I_SYS_TIME /**/
-/*#define I_SYS_TIME_KERNEL / **/
-#define HAS_TM_TM_ZONE /**/
-#define HAS_TM_TM_GMTOFF /**/
+/*#define HAS_FPOS64_T / **/
-/* VAL_O_NONBLOCK:
- * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
- * non-blocking I/O for the file descriptor. Note that there is no way
- * back, i.e. you cannot turn it blocking again this way. If you wish to
- * alternatively switch between blocking and non-blocking, use the
- * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
+/* HAS_FREXPL:
+ * This symbol, if defined, indicates that the frexpl routine is
+ * available to break a long double floating-point number into
+ * a normalized fraction and an integral power of 2.
*/
-/* VAL_EAGAIN:
- * This symbol holds the errno error code set by read() when no data was
- * present on the non-blocking file descriptor.
+#define HAS_FREXPL /**/
+
+/* HAS_STRUCT_FS_DATA:
+ * This symbol, if defined, indicates that the struct fs_data
+ * to do statfs() is supported.
*/
-/* RD_NODATA:
- * This symbol holds the return code from read() when no data is present
- * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
- * not defined, then you can't distinguish between no data and EOF by
- * issuing a read(). You'll have to find another way to tell for sure!
+/*#define HAS_STRUCT_FS_DATA / **/
+
+/* HAS_FSEEKO:
+ * This symbol, if defined, indicates that the fseeko routine is
+ * available to fseek beyond 32 bits (useful for ILP32 hosts).
*/
-/* EOF_NONBLOCK:
- * This symbol, if defined, indicates to the C program that a read() on
- * a non-blocking file descriptor will return 0 on EOF, and not the value
- * held in RD_NODATA (-1 usually, in that case!).
+#define HAS_FSEEKO /**/
+
+/* HAS_FSTATFS:
+ * This symbol, if defined, indicates that the fstatfs routine is
+ * available to stat filesystems by file descriptors.
*/
-#define VAL_O_NONBLOCK O_NONBLOCK
-#define VAL_EAGAIN EAGAIN
-#define RD_NODATA -1
-#define EOF_NONBLOCK
+#define HAS_FSTATFS /**/
-/* PTRSIZE:
- * This symbol contains the size of a pointer, so that the C preprocessor
- * can make decisions based on it. It will be sizeof(void *) if
- * the compiler supports (void *); otherwise it will be
- * sizeof(char *).
+/* HAS_FSYNC:
+ * This symbol, if defined, indicates that the fsync routine is
+ * available to write a file's modified data and attributes to
+ * permanent storage.
*/
-#define PTRSIZE 4 /**/
+#define HAS_FSYNC /**/
-/* Drand01:
- * This macro is to be used to generate uniformly distributed
- * random numbers over the range [0., 1.[. You may have to supply
- * an 'extern double drand48();' in your program since SunOS 4.1.3
- * doesn't provide you with anything relevant in its headers.
- * See HAS_DRAND48_PROTO.
+/* HAS_FTELLO:
+ * This symbol, if defined, indicates that the ftello routine is
+ * available to ftell beyond 32 bits (useful for ILP32 hosts).
*/
-/* Rand_seed_t:
- * This symbol defines the type of the argument of the
- * random seed function.
+#define HAS_FTELLO /**/
+
+/* Gconvert:
+ * This preprocessor macro is defined to convert a floating point
+ * number to a string without a trailing decimal point. This
+ * emulates the behavior of sprintf("%g"), but is sometimes much more
+ * efficient. If gconvert() is not available, but gcvt() drops the
+ * trailing decimal point, then gcvt() is used. If all else fails,
+ * a macro using sprintf("%g") is used. Arguments for the Gconvert
+ * macro are: value, number of digits, whether trailing zeros should
+ * be retained, and the output buffer.
+ * The usual values are:
+ * d_Gconvert='gconvert((x),(n),(t),(b))'
+ * d_Gconvert='gcvt((x),(n),(b))'
+ * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
+ * The last two assume trailing zeros should not be kept.
*/
-/* seedDrand01:
- * This symbol defines the macro to be used in seeding the
- * random number generator (see Drand01).
+#define Gconvert(x,n,t,b) gcvt((x),(n),(b))
+
+/* HAS_GETCWD:
+ * This symbol, if defined, indicates that the getcwd routine is
+ * available to get the current working directory.
*/
-/* RANDBITS:
- * This symbol indicates how many bits are produced by the
- * function used to generate normalized random numbers.
- * Values include 15, 16, 31, and 48.
+#define HAS_GETCWD /**/
+
+/* HAS_GETESPWNAM:
+ * This symbol, if defined, indicates that the getespwnam system call is
+ * available to retrieve enchanced (shadow) password entries by name.
*/
-#define Drand01() drand48() /**/
-#define Rand_seed_t long /**/
-#define seedDrand01(x) srand48((Rand_seed_t)x) /**/
-#define RANDBITS 48 /**/
+/*#define HAS_GETESPWNAM / **/
-/* SSize_t:
- * This symbol holds the type used by functions that return
- * a count of bytes or an error condition. It must be a signed type.
- * It is usually ssize_t, but may be long or int, etc.
- * It may be necessary to include <sys/types.h> or <unistd.h>
- * to get any typedef'ed information.
- * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
+/* HAS_GETFSSTAT:
+ * This symbol, if defined, indicates that the getfsstat routine is
+ * available to stat filesystems in bulk.
*/
-#define SSize_t ssize_t /* signed count of bytes */
+/*#define HAS_GETFSSTAT / **/
-/* EBCDIC:
- * This symbol, if defined, indicates that this system uses
- * EBCDIC encoding.
+/* HAS_GETGRENT:
+ * This symbol, if defined, indicates that the getgrent routine is
+ * available for sequential access of the group database.
*/
-/*#define EBCDIC / **/
+#define HAS_GETGRENT /**/
-/* ARCHLIB:
- * This variable, if defined, holds the name of the directory in
- * which the user wants to put architecture-dependent public
- * library files for perl5. It is most often a local directory
- * such as /usr/local/lib. Programs using this variable must be
- * prepared to deal with filename expansion. If ARCHLIB is the
- * same as PRIVLIB, it is not defined, since presumably the
- * program already searches PRIVLIB.
+/* HAS_GETGRENT_R:
+ * This symbol, if defined, indicates that the getgrent_r routine
+ * is available to getgrent re-entrantly.
*/
-/* ARCHLIB_EXP:
- * This symbol contains the ~name expanded version of ARCHLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
+/* GETGRENT_R_PROTO:
+ * This symbol encodes the prototype of getgrent_r.
+ * It is zero if d_getgrent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrent_r
+ * is defined.
*/
-#define ARCHLIB "/opt/perl/lib/5.9.2/i686-linux" /**/
-#define ARCHLIB_EXP "/opt/perl/lib/5.9.2/i686-linux" /**/
+/*#define HAS_GETGRENT_R / **/
+#define GETGRENT_R_PROTO 0 /**/
-/* BIN:
- * This symbol holds the path of the bin directory where the package will
- * be installed. Program must be prepared to deal with ~name substitution.
+/* HAS_GETGRGID_R:
+ * This symbol, if defined, indicates that the getgrgid_r routine
+ * is available to getgrgid re-entrantly.
*/
-/* BIN_EXP:
- * This symbol is the filename expanded version of the BIN symbol, for
- * programs that do not want to deal with that at run-time.
+/* GETGRGID_R_PROTO:
+ * This symbol encodes the prototype of getgrgid_r.
+ * It is zero if d_getgrgid_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrgid_r
+ * is defined.
*/
-#define BIN "/opt/perl/bin" /**/
-#define BIN_EXP "/opt/perl/bin" /**/
+/*#define HAS_GETGRGID_R / **/
+#define GETGRGID_R_PROTO 0 /**/
-/* PERL_INC_VERSION_LIST:
- * This variable specifies the list of subdirectories in over
- * which perl.c:incpush() and lib/lib.pm will automatically
- * search when adding directories to @INC, in a format suitable
- * for a C initialization string. See the inc_version_list entry
- * in Porting/Glossary for more details.
+/* HAS_GETGRNAM_R:
+ * This symbol, if defined, indicates that the getgrnam_r routine
+ * is available to getgrnam re-entrantly.
*/
-#define PERL_INC_VERSION_LIST 0 /**/
-
-/* INSTALL_USR_BIN_PERL:
- * This symbol, if defined, indicates that Perl is to be installed
- * also as /usr/bin/perl.
+/* GETGRNAM_R_PROTO:
+ * This symbol encodes the prototype of getgrnam_r.
+ * It is zero if d_getgrnam_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrnam_r
+ * is defined.
*/
-/*#define INSTALL_USR_BIN_PERL / **/
+/*#define HAS_GETGRNAM_R / **/
+#define GETGRNAM_R_PROTO 0 /**/
-/* PERL_OTHERLIBDIRS:
- * This variable contains a colon-separated set of paths for the perl
- * binary to search for additional library files or modules.
- * These directories will be tacked to the end of @INC.
- * Perl will automatically search below each path for version-
- * and architecture-specific directories. See PERL_INC_VERSION_LIST
- * for more details.
+/* HAS_GETHOSTBYADDR:
+ * This symbol, if defined, indicates that the gethostbyaddr() routine is
+ * available to look up hosts by their IP addresses.
*/
-/*#define PERL_OTHERLIBDIRS " " / **/
+#define HAS_GETHOSTBYADDR /**/
-/* INSTALL_PREFIX:
- * This symbol contains the "root" of installation tree for this package.
- * The program should be prepared to do ~ expansion.
- */
-/* INSTALL_PREFIX_EXP:
- * This symbol contains the "root" of installation tree for this package
- * to be used in programs that are not prepared to deal with ~ expansion
- * at run-time.
+/* HAS_GETHOSTBYNAME:
+ * This symbol, if defined, indicates that the gethostbyname() routine is
+ * available to look up host names in some data base or other.
*/
-#define INSTALL_PREFIX "/opt/perl" /**/
-#define INSTALL_PREFIX_EXP "/opt/perl" /**/
+#define HAS_GETHOSTBYNAME /**/
-/* PRIVLIB:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
- */
-/* PRIVLIB_EXP:
- * This symbol contains the ~name expanded version of PRIVLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
+/* HAS_GETHOSTENT:
+ * This symbol, if defined, indicates that the gethostent() routine is
+ * available to look up host names in some data base or another.
*/
-#define PRIVLIB "/opt/perl/lib/5.9.2" /**/
-#define PRIVLIB_EXP "/opt/perl/lib/5.9.2" /**/
+#define HAS_GETHOSTENT /**/
-/* SITEARCH:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
- * The standard distribution will put nothing in this directory.
- * After perl has been installed, users may install their own local
- * architecture-dependent modules in this directory with
- * MakeMaker Makefile.PL
- * or equivalent. See INSTALL for details.
- */
-/* SITEARCH_EXP:
- * This symbol contains the ~name expanded version of SITEARCH, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
+/* HAS_GETHOSTNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * gethostname() routine to derive the host name. See also HAS_UNAME
+ * and PHOSTNAME.
*/
-#define SITEARCH "/opt/perl/lib/site_perl/5.9.2/i686-linux" /**/
-#define SITEARCH_EXP "/opt/perl/lib/site_perl/5.9.2/i686-linux" /**/
-
-/* SITELIB:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
- * The standard distribution will put nothing in this directory.
- * After perl has been installed, users may install their own local
- * architecture-independent modules in this directory with
- * MakeMaker Makefile.PL
- * or equivalent. See INSTALL for details.
+/* HAS_UNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * uname() routine to derive the host name. See also HAS_GETHOSTNAME
+ * and PHOSTNAME.
*/
-/* SITELIB_EXP:
- * This symbol contains the ~name expanded version of SITELIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
+/* PHOSTNAME:
+ * This symbol, if defined, indicates the command to feed to the
+ * popen() routine to derive the host name. See also HAS_GETHOSTNAME
+ * and HAS_UNAME. Note that the command uses a fully qualified path,
+ * so that it is safe even if used by a process with super-user
+ * privileges.
*/
-/* SITELIB_STEM:
- * This define is SITELIB_EXP with any trailing version-specific component
- * removed. The elements in inc_version_list (inc_version_list.U) can
- * be tacked onto this variable to generate a list of directories to search.
+/* HAS_PHOSTNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * contents of PHOSTNAME as a command to feed to the popen() routine
+ * to derive the host name.
*/
-#define SITELIB "/opt/perl/lib/site_perl/5.9.2" /**/
-#define SITELIB_EXP "/opt/perl/lib/site_perl/5.9.2" /**/
-#define SITELIB_STEM "/opt/perl/lib/site_perl" /**/
+#define HAS_GETHOSTNAME /**/
+#define HAS_UNAME /**/
+/*#define HAS_PHOSTNAME / **/
+#ifdef HAS_PHOSTNAME
+#define PHOSTNAME "" /* How to get the host name */
+#endif
-/* PERL_VENDORARCH:
- * If defined, this symbol contains the name of a private library.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world.
- * It may have a ~ on the front.
- * The standard distribution will put nothing in this directory.
- * Vendors who distribute perl may wish to place their own
- * architecture-dependent modules and extensions in this directory with
- * MakeMaker Makefile.PL INSTALLDIRS=vendor
- * or equivalent. See INSTALL for details.
- */
-/* PERL_VENDORARCH_EXP:
- * This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
+/* HAS_GETHOST_PROTOS:
+ * This symbol, if defined, indicates that <netdb.h> includes
+ * prototypes for gethostent(), gethostbyname(), and
+ * gethostbyaddr(). Otherwise, it is up to the program to guess
+ * them. See netdbtype.U for probing for various Netdb_xxx_t types.
*/
-/*#define PERL_VENDORARCH "" / **/
-/*#define PERL_VENDORARCH_EXP "" / **/
+#define HAS_GETHOST_PROTOS /**/
-/* PERL_VENDORLIB_EXP:
- * This symbol contains the ~name expanded version of VENDORLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
- */
-/* PERL_VENDORLIB_STEM:
- * This define is PERL_VENDORLIB_EXP with any trailing version-specific component
- * removed. The elements in inc_version_list (inc_version_list.U) can
- * be tacked onto this variable to generate a list of directories to search.
+/* HAS_GETITIMER:
+ * This symbol, if defined, indicates that the getitimer routine is
+ * available to return interval timers.
*/
-/*#define PERL_VENDORLIB_EXP "" / **/
-/*#define PERL_VENDORLIB_STEM "" / **/
+#define HAS_GETITIMER /**/
-/* OSNAME:
- * This symbol contains the name of the operating system, as determined
- * by Configure. You shouldn't rely on it too much; the specific
- * feature tests from Configure are generally more reliable.
+/* HAS_GETLOGIN_R:
+ * This symbol, if defined, indicates that the getlogin_r routine
+ * is available to getlogin re-entrantly.
*/
-/* OSVERS:
- * This symbol contains the version of the operating system, as determined
- * by Configure. You shouldn't rely on it too much; the specific
- * feature tests from Configure are generally more reliable.
+/* GETLOGIN_R_PROTO:
+ * This symbol encodes the prototype of getlogin_r.
+ * It is zero if d_getlogin_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getlogin_r
+ * is defined.
*/
-#define OSNAME "linux" /**/
-#define OSVERS "2.4.20" /**/
+/*#define HAS_GETLOGIN_R / **/
+#define GETLOGIN_R_PROTO 0 /**/
-/* CAT2:
- * This macro concatenates 2 tokens together.
- */
-/* STRINGIFY:
- * This macro surrounds its token with double quotes.
+/* HAS_GETMNT:
+ * This symbol, if defined, indicates that the getmnt routine is
+ * available to get filesystem mount info by filename.
*/
-#if 42 == 1
-#define CAT2(a,b) a/**/b
-#define STRINGIFY(a) "a"
- /* If you can get stringification with catify, tell me how! */
-#endif
-#if 42 == 42
-#define PeRl_CaTiFy(a, b) a ## b
-#define PeRl_StGiFy(a) #a
-/* the additional level of indirection enables these macros to be
- * used as arguments to other macros. See K&R 2nd ed., page 231. */
-#define CAT2(a,b) PeRl_CaTiFy(a,b)
-#define StGiFy(a) PeRl_StGiFy(a)
-#define STRINGIFY(a) PeRl_StGiFy(a)
-#endif
-#if 42 != 1 && 42 != 42
-# include "Bletch: How does this C preprocessor concatenate tokens?"
-#endif
+/*#define HAS_GETMNT / **/
-/* CPPSTDIN:
- * This symbol contains the first part of the string which will invoke
- * the C preprocessor on the standard input and produce to standard
- * output. Typical value of "cc -E" or "/lib/cpp", but it can also
- * call a wrapper. See CPPRUN.
+/* HAS_GETMNTENT:
+ * This symbol, if defined, indicates that the getmntent routine is
+ * available to iterate through mounted file systems to get their info.
*/
-/* CPPMINUS:
- * This symbol contains the second part of the string which will invoke
- * the C preprocessor on the standard input and produce to standard
- * output. This symbol will have the value "-" if CPPSTDIN needs a minus
- * to specify standard input, otherwise the value is "".
+#define HAS_GETMNTENT /**/
+
+/* HAS_GETNETBYADDR:
+ * This symbol, if defined, indicates that the getnetbyaddr() routine is
+ * available to look up networks by their IP addresses.
*/
-/* CPPRUN:
- * This symbol contains the string which will invoke a C preprocessor on
- * the standard input and produce to standard output. It needs to end
- * with CPPLAST, after all other preprocessor flags have been specified.
- * The main difference with CPPSTDIN is that this program will never be a
- * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
- * available directly to the user. Note that it may well be different from
- * the preprocessor used to compile the C program.
+#define HAS_GETNETBYADDR /**/
+
+/* HAS_GETNETBYNAME:
+ * This symbol, if defined, indicates that the getnetbyname() routine is
+ * available to look up networks by their names.
*/
-/* CPPLAST:
- * This symbol is intended to be used along with CPPRUN in the same manner
- * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "".
+#define HAS_GETNETBYNAME /**/
+
+/* HAS_GETNETENT:
+ * This symbol, if defined, indicates that the getnetent() routine is
+ * available to look up network names in some data base or another.
*/
-#define CPPSTDIN "/usr/local/gcc331/bin/gcc331 -E"
-#define CPPMINUS "-"
-#define CPPRUN "/usr/local/gcc331/bin/gcc331 -E"
-#define CPPLAST "-"
+#define HAS_GETNETENT /**/
-/* HAS_ACCESS:
- * This manifest constant lets the C program know that the access()
- * system call is available to check for accessibility using real UID/GID.
- * (always present on UNIX.)
+/* HAS_GETNET_PROTOS:
+ * This symbol, if defined, indicates that <netdb.h> includes
+ * prototypes for getnetent(), getnetbyname(), and
+ * getnetbyaddr(). Otherwise, it is up to the program to guess
+ * them. See netdbtype.U for probing for various Netdb_xxx_t types.
*/
-#define HAS_ACCESS /**/
+#define HAS_GETNET_PROTOS /**/
-/* HASATTRIBUTE:
- * This symbol indicates the C compiler can check for function attributes,
- * such as printf formats. This is normally only supported by GNU cc.
+/* HAS_GETPAGESIZE:
+ * This symbol, if defined, indicates that the getpagesize system call
+ * is available to get system page size, which is the granularity of
+ * many memory management calls.
*/
-#define HASATTRIBUTE /**/
-#ifndef HASATTRIBUTE
-#ifdef __attribute__
-#undef __attribute__
-#endif
-#define __attribute__(_arg_)
-#endif
+#define HAS_GETPAGESIZE /**/
-/* HAS_CRYPT:
- * This symbol, if defined, indicates that the crypt routine is available
- * to encrypt passwords and the like.
+/* HAS_GETPROTOENT:
+ * This symbol, if defined, indicates that the getprotoent() routine is
+ * available to look up protocols in some data base or another.
*/
-#define HAS_CRYPT /**/
+#define HAS_GETPROTOENT /**/
-/* HAS_CSH:
- * This symbol, if defined, indicates that the C-shell exists.
+/* HAS_GETPGRP:
+ * This symbol, if defined, indicates that the getpgrp routine is
+ * available to get the current process group.
*/
-/* CSH:
- * This symbol, if defined, contains the full pathname of csh.
+/* USE_BSD_GETPGRP:
+ * This symbol, if defined, indicates that getpgrp needs one
+ * arguments whereas USG one needs none.
*/
-#define HAS_CSH /**/
-#ifdef HAS_CSH
-#define CSH "/bin/csh" /**/
-#endif
+#define HAS_GETPGRP /**/
+/*#define USE_BSD_GETPGRP / **/
-/* SETUID_SCRIPTS_ARE_SECURE_NOW:
- * This symbol, if defined, indicates that the bug that prevents
- * setuid scripts from being secure is not present in this kernel.
+/* HAS_GETPROTOBYNAME:
+ * This symbol, if defined, indicates that the getprotobyname()
+ * routine is available to look up protocols by their name.
*/
-/* DOSUID:
- * This symbol, if defined, indicates that the C program should
- * check the script that it is executing for setuid/setgid bits, and
- * attempt to emulate setuid/setgid on systems that have disabled
- * setuid #! scripts because the kernel can't do it securely.
- * It is up to the package designer to make sure that this emulation
- * is done securely. Among other things, it should do an fstat on
- * the script it just opened to make sure it really is a setuid/setgid
- * script, it should make sure the arguments passed correspond exactly
- * to the argument on the #! line, and it should not trust any
- * subprocesses to which it must pass the filename rather than the
- * file descriptor of the script to be executed.
- */
-/*#define SETUID_SCRIPTS_ARE_SECURE_NOW / **/
-/*#define DOSUID / **/
-
-/* HAS_ENDGRENT:
- * This symbol, if defined, indicates that the getgrent routine is
- * available for finalizing sequential access of the group database.
- */
-#define HAS_ENDGRENT /**/
-
-/* HAS_ENDHOSTENT:
- * This symbol, if defined, indicates that the endhostent() routine is
- * available to close whatever was being used for host queries.
- */
-#define HAS_ENDHOSTENT /**/
-
-/* HAS_ENDNETENT:
- * This symbol, if defined, indicates that the endnetent() routine is
- * available to close whatever was being used for network queries.
- */
-#define HAS_ENDNETENT /**/
-
-/* HAS_ENDPROTOENT:
- * This symbol, if defined, indicates that the endprotoent() routine is
- * available to close whatever was being used for protocol queries.
- */
-#define HAS_ENDPROTOENT /**/
-
-/* HAS_ENDPWENT:
- * This symbol, if defined, indicates that the getgrent routine is
- * available for finalizing sequential access of the passwd database.
- */
-#define HAS_ENDPWENT /**/
-
-/* HAS_ENDSERVENT:
- * This symbol, if defined, indicates that the endservent() routine is
- * available to close whatever was being used for service queries.
+/* HAS_GETPROTOBYNUMBER:
+ * This symbol, if defined, indicates that the getprotobynumber()
+ * routine is available to look up protocols by their number.
*/
-#define HAS_ENDSERVENT /**/
+#define HAS_GETPROTOBYNAME /**/
+#define HAS_GETPROTOBYNUMBER /**/
-/* FLEXFILENAMES:
- * This symbol, if defined, indicates that the system supports filenames
- * longer than 14 characters.
+/* HAS_GETPROTO_PROTOS:
+ * This symbol, if defined, indicates that <netdb.h> includes
+ * prototypes for getprotoent(), getprotobyname(), and
+ * getprotobyaddr(). Otherwise, it is up to the program to guess
+ * them. See netdbtype.U for probing for various Netdb_xxx_t types.
*/
-#define FLEXFILENAMES /**/
+#define HAS_GETPROTO_PROTOS /**/
-/* HAS_GETGRENT:
- * This symbol, if defined, indicates that the getgrent routine is
- * available for sequential access of the group database.
+/* HAS_GETPRPWNAM:
+ * This symbol, if defined, indicates that the getprpwnam system call is
+ * available to retrieve protected (shadow) password entries by name.
*/
-#define HAS_GETGRENT /**/
+/*#define HAS_GETPRPWNAM / **/
-/* HAS_GETHOSTBYADDR:
- * This symbol, if defined, indicates that the gethostbyaddr() routine is
- * available to look up hosts by their IP addresses.
+/* HAS_GETPWENT:
+ * This symbol, if defined, indicates that the getpwent routine is
+ * available for sequential access of the passwd database.
+ * If this is not available, the older getpw() function may be available.
*/
-#define HAS_GETHOSTBYADDR /**/
+#define HAS_GETPWENT /**/
-/* HAS_GETHOSTBYNAME:
- * This symbol, if defined, indicates that the gethostbyname() routine is
- * available to look up host names in some data base or other.
+/* HAS_GETPWENT_R:
+ * This symbol, if defined, indicates that the getpwent_r routine
+ * is available to getpwent re-entrantly.
*/
-#define HAS_GETHOSTBYNAME /**/
-
-/* HAS_GETHOSTENT:
- * This symbol, if defined, indicates that the gethostent() routine is
- * available to look up host names in some data base or another.
+/* GETPWENT_R_PROTO:
+ * This symbol encodes the prototype of getpwent_r.
+ * It is zero if d_getpwent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwent_r
+ * is defined.
*/
-#define HAS_GETHOSTENT /**/
+/*#define HAS_GETPWENT_R / **/
+#define GETPWENT_R_PROTO 0 /**/
-/* HAS_GETHOSTNAME:
- * This symbol, if defined, indicates that the C program may use the
- * gethostname() routine to derive the host name. See also HAS_UNAME
- * and PHOSTNAME.
- */
-/* HAS_UNAME:
- * This symbol, if defined, indicates that the C program may use the
- * uname() routine to derive the host name. See also HAS_GETHOSTNAME
- * and PHOSTNAME.
- */
-/* PHOSTNAME:
- * This symbol, if defined, indicates the command to feed to the
- * popen() routine to derive the host name. See also HAS_GETHOSTNAME
- * and HAS_UNAME. Note that the command uses a fully qualified path,
- * so that it is safe even if used by a process with super-user
- * privileges.
- */
-/* HAS_PHOSTNAME:
- * This symbol, if defined, indicates that the C program may use the
- * contents of PHOSTNAME as a command to feed to the popen() routine
- * to derive the host name.
+/* HAS_GETPWNAM_R:
+ * This symbol, if defined, indicates that the getpwnam_r routine
+ * is available to getpwnam re-entrantly.
*/
-#define HAS_GETHOSTNAME /**/
-#define HAS_UNAME /**/
-/*#define HAS_PHOSTNAME / **/
-#ifdef HAS_PHOSTNAME
-#define PHOSTNAME "/bin/hostname" /* How to get the host name */
-#endif
-
-/* HAS_GETNETBYADDR:
- * This symbol, if defined, indicates that the getnetbyaddr() routine is
- * available to look up networks by their IP addresses.
+/* GETPWNAM_R_PROTO:
+ * This symbol encodes the prototype of getpwnam_r.
+ * It is zero if d_getpwnam_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwnam_r
+ * is defined.
*/
-#define HAS_GETNETBYADDR /**/
+/*#define HAS_GETPWNAM_R / **/
+#define GETPWNAM_R_PROTO 0 /**/
-/* HAS_GETNETBYNAME:
- * This symbol, if defined, indicates that the getnetbyname() routine is
- * available to look up networks by their names.
+/* HAS_GETPWUID_R:
+ * This symbol, if defined, indicates that the getpwuid_r routine
+ * is available to getpwuid re-entrantly.
*/
-#define HAS_GETNETBYNAME /**/
-
-/* HAS_GETNETENT:
- * This symbol, if defined, indicates that the getnetent() routine is
- * available to look up network names in some data base or another.
+/* GETPWUID_R_PROTO:
+ * This symbol encodes the prototype of getpwuid_r.
+ * It is zero if d_getpwuid_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwuid_r
+ * is defined.
*/
-#define HAS_GETNETENT /**/
+/*#define HAS_GETPWUID_R / **/
+#define GETPWUID_R_PROTO 0 /**/
-/* HAS_GETPROTOENT:
- * This symbol, if defined, indicates that the getprotoent() routine is
- * available to look up protocols in some data base or another.
+/* HAS_GETSERVENT:
+ * This symbol, if defined, indicates that the getservent() routine is
+ * available to look up network services in some data base or another.
*/
-#define HAS_GETPROTOENT /**/
+#define HAS_GETSERVENT /**/
-/* HAS_GETPGRP:
- * This symbol, if defined, indicates that the getpgrp routine is
- * available to get the current process group.
- */
-/* USE_BSD_GETPGRP:
- * This symbol, if defined, indicates that getpgrp needs one
- * arguments whereas USG one needs none.
+/* HAS_GETSERV_PROTOS:
+ * This symbol, if defined, indicates that <netdb.h> includes
+ * prototypes for getservent(), getservbyname(), and
+ * getservbyaddr(). Otherwise, it is up to the program to guess
+ * them. See netdbtype.U for probing for various Netdb_xxx_t types.
*/
-#define HAS_GETPGRP /**/
-/*#define USE_BSD_GETPGRP / **/
+#define HAS_GETSERV_PROTOS /**/
-/* HAS_GETPROTOBYNAME:
- * This symbol, if defined, indicates that the getprotobyname()
- * routine is available to look up protocols by their name.
- */
-/* HAS_GETPROTOBYNUMBER:
- * This symbol, if defined, indicates that the getprotobynumber()
- * routine is available to look up protocols by their number.
+/* HAS_GETSPNAM:
+ * This symbol, if defined, indicates that the getspnam system call is
+ * available to retrieve SysV shadow password entries by name.
*/
-#define HAS_GETPROTOBYNAME /**/
-#define HAS_GETPROTOBYNUMBER /**/
+#define HAS_GETSPNAM /**/
-/* HAS_GETPWENT:
- * This symbol, if defined, indicates that the getpwent routine is
- * available for sequential access of the passwd database.
- * If this is not available, the older getpw() function may be available.
+/* HAS_GETSPNAM_R:
+ * This symbol, if defined, indicates that the getspnam_r routine
+ * is available to getspnam re-entrantly.
*/
-#define HAS_GETPWENT /**/
-
-/* HAS_GETSERVENT:
- * This symbol, if defined, indicates that the getservent() routine is
- * available to look up network services in some data base or another.
+/* GETSPNAM_R_PROTO:
+ * This symbol encodes the prototype of getspnam_r.
+ * It is zero if d_getspnam_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getspnam_r
+ * is defined.
*/
-#define HAS_GETSERVENT /**/
+/*#define HAS_GETSPNAM_R / **/
+#define GETSPNAM_R_PROTO 0 /**/
/* HAS_GETSERVBYNAME:
* This symbol, if defined, indicates that the getservbyname()
#define HAS_GETSERVBYNAME /**/
#define HAS_GETSERVBYPORT /**/
+/* HAS_GMTIME_R:
+ * This symbol, if defined, indicates that the gmtime_r routine
+ * is available to gmtime re-entrantly.
+ */
+/* GMTIME_R_PROTO:
+ * This symbol encodes the prototype of gmtime_r.
+ * It is zero if d_gmtime_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gmtime_r
+ * is defined.
+ */
+/*#define HAS_GMTIME_R / **/
+#define GMTIME_R_PROTO 0 /**/
+
+/* HAS_GNULIBC:
+ * This symbol, if defined, indicates to the C program that
+ * the GNU C library is being used. A better check is to use
+ * the __GLIBC__ and __GLIBC_MINOR__ symbols supplied with glibc.
+ */
+#define HAS_GNULIBC /**/
+#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
+# define _GNU_SOURCE
+#endif
+/* HAS_HASMNTOPT:
+ * This symbol, if defined, indicates that the hasmntopt routine is
+ * available to query the mount options of file systems.
+ */
+#define HAS_HASMNTOPT /**/
+
/* HAS_HTONL:
* This symbol, if defined, indicates that the htonl() routine (and
* friends htons() ntohl() ntohs()) are available to do network
#define HAS_NTOHL /**/
#define HAS_NTOHS /**/
-/* HAS_LONG_DOUBLE:
- * This symbol will be defined if the C compiler supports long
- * doubles.
- */
-/* LONG_DOUBLESIZE:
- * This symbol contains the size of a long double, so that the
- * C preprocessor can make decisions based on it. It is only
- * defined if the system supports long doubles.
+/* HAS_INT64_T:
+ * This symbol will defined if the C compiler supports int64_t.
+ * Usually the <inttypes.h> needs to be included, but sometimes
+ * <sys/types.h> is enough.
*/
-#define HAS_LONG_DOUBLE /**/
-#ifdef HAS_LONG_DOUBLE
-#define LONG_DOUBLESIZE 12 /**/
+#define HAS_INT64_T /**/
+
+/* HAS_ISASCII:
+ * This manifest constant lets the C program know that isascii
+ * is available.
+ */
+#define HAS_ISASCII /**/
+
+/* HAS_ISFINITE:
+ * This symbol, if defined, indicates that the isfinite routine is
+ * available to check whether a double is finite (non-infinity non-NaN).
+ */
+/*#define HAS_ISFINITE / **/
+
+/* HAS_ISINF:
+ * This symbol, if defined, indicates that the isinf routine is
+ * available to check whether a double is an infinity.
+ */
+#define HAS_ISINF /**/
+
+/* HAS_ISNAN:
+ * This symbol, if defined, indicates that the isnan routine is
+ * available to check whether a double is a NaN.
+ */
+#define HAS_ISNAN /**/
+
+/* HAS_ISNANL:
+ * This symbol, if defined, indicates that the isnanl routine is
+ * available to check whether a long double is a NaN.
+ */
+#define HAS_ISNANL /**/
+
+/* HAS_LCHOWN:
+ * This symbol, if defined, indicates that the lchown routine is
+ * available to operate on a symbolic link (instead of following the
+ * link).
+ */
+#define HAS_LCHOWN /**/
+
+/* HAS_LDBL_DIG:
+ * This symbol, if defined, indicates that this system's <float.h>
+ * or <limits.h> defines the symbol LDBL_DIG, which is the number
+ * of significant digits in a long double precision number. Unlike
+ * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
+ */
+#define HAS_LDBL_DIG /* */
+
+/* HAS_LOCALTIME_R:
+ * This symbol, if defined, indicates that the localtime_r routine
+ * is available to localtime re-entrantly.
+ */
+/* LOCALTIME_R_PROTO:
+ * This symbol encodes the prototype of localtime_r.
+ * It is zero if d_localtime_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_localtime_r
+ * is defined.
+ */
+/*#define HAS_LOCALTIME_R / **/
+#define LOCALTIME_R_PROTO 0 /**/
+
+/* HAS_LONG_DOUBLE:
+ * This symbol will be defined if the C compiler supports long
+ * doubles.
+ */
+/* LONG_DOUBLESIZE:
+ * This symbol contains the size of a long double, so that the
+ * C preprocessor can make decisions based on it. It is only
+ * defined if the system supports long doubles.
+ */
+#define HAS_LONG_DOUBLE /**/
+#ifdef HAS_LONG_DOUBLE
+#define LONG_DOUBLESIZE 12 /**/
#endif
/* HAS_LONG_LONG:
#define LONGLONGSIZE 8 /**/
#endif
+/* HAS_LSEEK_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the lseek() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern off_t lseek(int, off_t, int);
+ */
+#define HAS_LSEEK_PROTO /**/
+
+/* HAS_MADVISE:
+ * This symbol, if defined, indicates that the madvise system call is
+ * available to map a file into memory.
+ */
+#define HAS_MADVISE /**/
+
/* HAS_MEMCHR:
* This symbol, if defined, indicates that the memchr routine is available
* to locate characters within a C string.
*/
#define HAS_MEMCHR /**/
+/* HAS_MKDTEMP:
+ * This symbol, if defined, indicates that the mkdtemp routine is
+ * available to exclusively create a uniquely named temporary directory.
+ */
+#define HAS_MKDTEMP /**/
+
/* HAS_MKSTEMP:
* This symbol, if defined, indicates that the mkstemp routine is
* available to exclusively create and open a uniquely named
*/
#define HAS_MKSTEMP /**/
+/* HAS_MKSTEMPS:
+ * This symbol, if defined, indicates that the mkstemps routine is
+ * available to excluslvely create and open a uniquely named
+ * (with a suffix) temporary file.
+ */
+/*#define HAS_MKSTEMPS / **/
+
/* HAS_MMAP:
* This symbol, if defined, indicates that the mmap system call is
* available to map a file into memory.
#define HAS_MMAP /**/
#define Mmap_t void * /**/
+/* HAS_MODFL:
+ * This symbol, if defined, indicates that the modfl routine is
+ * available to split a long double x into a fractional part f and
+ * an integer part i such that |f| < 1.0 and (f + i) = x.
+ */
+/* HAS_MODFL_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the modfl() function. Otherwise, it is up
+ * to the program to supply one.
+ */
+/* HAS_MODFL_POW32_BUG:
+ * This symbol, if defined, indicates that the modfl routine is
+ * broken for long doubles >= pow(2, 32).
+ * For example from 4294967303.150000 one would get 4294967302.000000
+ * and 1.150000. The bug has been seen in certain versions of glibc,
+ * release 2.2.2 is known to be okay.
+ */
+#define HAS_MODFL /**/
+/*#define HAS_MODFL_PROTO / **/
+/*#define HAS_MODFL_POW32_BUG / **/
+
+/* HAS_MPROTECT:
+ * This symbol, if defined, indicates that the mprotect system call is
+ * available to modify the access protection of a memory mapped file.
+ */
+#define HAS_MPROTECT /**/
+
/* HAS_MSG:
* This symbol, if defined, indicates that the entire msg*(2) library is
* supported (IPC mechanism based on message queues).
*/
#define HAS_MSG /**/
-/* HAS_SEM:
- * This symbol, if defined, indicates that the entire sem*(2) library is
- * supported.
+/* HAS_STRUCT_MSGHDR:
+ * This symbol, if defined, indicates that the struct msghdr
+ * is supported.
*/
-#define HAS_SEM /**/
+#define HAS_STRUCT_MSGHDR /**/
-/* HAS_SETGRENT:
- * This symbol, if defined, indicates that the setgrent routine is
- * available for initializing sequential access of the group database.
+/* HAS_OFF64_T:
+ * This symbol will be defined if the C compiler supports off64_t.
*/
-#define HAS_SETGRENT /**/
+/*#define HAS_OFF64_T / **/
-/* HAS_SETGROUPS:
- * This symbol, if defined, indicates that the setgroups() routine is
- * available to set the list of process groups. If unavailable, multiple
- * groups are probably not supported.
+/* HAS_OPEN3:
+ * This manifest constant lets the C program know that the three
+ * argument form of open(2) is available.
*/
-#define HAS_SETGROUPS /**/
+#define HAS_OPEN3 /**/
-/* HAS_SETHOSTENT:
- * This symbol, if defined, indicates that the sethostent() routine is
- * available.
+/* OLD_PTHREAD_CREATE_JOINABLE:
+ * This symbol, if defined, indicates how to create pthread
+ * in joinable (aka undetached) state. NOTE: not defined
+ * if pthread.h already has defined PTHREAD_CREATE_JOINABLE
+ * (the new version of the constant).
+ * If defined, known values are PTHREAD_CREATE_UNDETACHED
+ * and __UNDETACHED.
*/
-#define HAS_SETHOSTENT /**/
+/*#define OLD_PTHREAD_CREATE_JOINABLE / **/
-/* HAS_SETNETENT:
- * This symbol, if defined, indicates that the setnetent() routine is
- * available.
+/* HAS_PTHREAD_YIELD:
+ * This symbol, if defined, indicates that the pthread_yield
+ * routine is available to yield the execution of the current
+ * thread. sched_yield is preferable to pthread_yield.
*/
-#define HAS_SETNETENT /**/
+/* SCHED_YIELD:
+ * This symbol defines the way to yield the execution of
+ * the current thread. Known ways are sched_yield,
+ * pthread_yield, and pthread_yield with NULL.
+ */
+/* HAS_SCHED_YIELD:
+ * This symbol, if defined, indicates that the sched_yield
+ * routine is available to yield the execution of the current
+ * thread. sched_yield is preferable to pthread_yield.
+ */
+/*#define HAS_PTHREAD_YIELD / **/
+#define SCHED_YIELD sched_yield() /**/
+#define HAS_SCHED_YIELD /**/
-/* HAS_SETPROTOENT:
- * This symbol, if defined, indicates that the setprotoent() routine is
- * available.
+/* HAS_RANDOM_R:
+ * This symbol, if defined, indicates that the random_r routine
+ * is available to random re-entrantly.
*/
-#define HAS_SETPROTOENT /**/
+/* RANDOM_R_PROTO:
+ * This symbol encodes the prototype of random_r.
+ * It is zero if d_random_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_random_r
+ * is defined.
+ */
+/*#define HAS_RANDOM_R / **/
+#define RANDOM_R_PROTO 0 /**/
-/* HAS_SETPGRP:
- * This symbol, if defined, indicates that the setpgrp routine is
- * available to set the current process group.
+/* HAS_READDIR_R:
+ * This symbol, if defined, indicates that the readdir_r routine
+ * is available to readdir re-entrantly.
*/
-/* USE_BSD_SETPGRP:
- * This symbol, if defined, indicates that setpgrp needs two
- * arguments whereas USG one needs none. See also HAS_SETPGID
- * for a POSIX interface.
+/* READDIR_R_PROTO:
+ * This symbol encodes the prototype of readdir_r.
+ * It is zero if d_readdir_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_readdir_r
+ * is defined.
*/
-#define HAS_SETPGRP /**/
-/*#define USE_BSD_SETPGRP / **/
+/*#define HAS_READDIR_R / **/
+#define READDIR_R_PROTO 0 /**/
-/* HAS_SETPWENT:
- * This symbol, if defined, indicates that the setpwent routine is
- * available for initializing sequential access of the passwd database.
+/* HAS_READV:
+ * This symbol, if defined, indicates that the readv routine is
+ * available to do gather reads. You will also need <sys/uio.h>
+ * and there I_SYSUIO.
*/
-#define HAS_SETPWENT /**/
+#define HAS_READV /**/
-/* HAS_SETSERVENT:
- * This symbol, if defined, indicates that the setservent() routine is
- * available.
+/* HAS_RECVMSG:
+ * This symbol, if defined, indicates that the recvmsg routine is
+ * available to send structured socket messages.
*/
-#define HAS_SETSERVENT /**/
+#define HAS_RECVMSG /**/
-/* HAS_SETVBUF:
- * This symbol, if defined, indicates that the setvbuf routine is
- * available to change buffering on an open stdio stream.
- * to a line-buffered mode.
+/* HAS_SAFE_BCOPY:
+ * This symbol, if defined, indicates that the bcopy routine is available
+ * to copy potentially overlapping memory blocks. Normally, you should
+ * probably use memmove() or memcpy(). If neither is defined, roll your
+ * own version.
*/
-#define HAS_SETVBUF /**/
+/*#define HAS_SAFE_BCOPY / **/
-/* HAS_SHM:
- * This symbol, if defined, indicates that the entire shm*(2) library is
- * supported.
+/* HAS_SAFE_MEMCPY:
+ * This symbol, if defined, indicates that the memcpy routine is available
+ * to copy potentially overlapping memory blocks. If you need to
+ * copy overlapping memory blocks, you should check HAS_MEMMOVE and
+ * use memmove() instead, if available.
*/
-#define HAS_SHM /**/
+/*#define HAS_SAFE_MEMCPY / **/
-/* Shmat_t:
- * This symbol holds the return type of the shmat() system call.
- * Usually set to 'void *' or 'char *'.
+/* HAS_SANE_MEMCMP:
+ * This symbol, if defined, indicates that the memcmp routine is available
+ * and can be used to compare relative magnitudes of chars with their high
+ * bits set. If it is not defined, roll your own version.
*/
-/* HAS_SHMAT_PROTOTYPE:
- * This symbol, if defined, indicates that the sys/shm.h includes
- * a prototype for shmat(). Otherwise, it is up to the program to
- * guess one. Shmat_t shmat(int, Shmat_t, int) is a good guess,
- * but not always right so it should be emitted by the program only
- * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs.
+#define HAS_SANE_MEMCMP /**/
+
+/* HAS_SBRK_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the sbrk() function. Otherwise, it is up
+ * to the program to supply one. Good guesses are
+ * extern void* sbrk(int);
+ * extern void* sbrk(size_t);
*/
-#define Shmat_t void * /**/
-#define HAS_SHMAT_PROTOTYPE /**/
+#define HAS_SBRK_PROTO /**/
+
+/* HAS_SEM:
+ * This symbol, if defined, indicates that the entire sem*(2) library is
+ * supported.
+ */
+#define HAS_SEM /**/
+
+/* HAS_SENDMSG:
+ * This symbol, if defined, indicates that the sendmsg routine is
+ * available to send structured socket messages.
+ */
+#define HAS_SENDMSG /**/
+
+/* HAS_SETGRENT:
+ * This symbol, if defined, indicates that the setgrent routine is
+ * available for initializing sequential access of the group database.
+ */
+#define HAS_SETGRENT /**/
+
+/* HAS_SETGRENT_R:
+ * This symbol, if defined, indicates that the setgrent_r routine
+ * is available to setgrent re-entrantly.
+ */
+/* SETGRENT_R_PROTO:
+ * This symbol encodes the prototype of setgrent_r.
+ * It is zero if d_setgrent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setgrent_r
+ * is defined.
+ */
+/*#define HAS_SETGRENT_R / **/
+#define SETGRENT_R_PROTO 0 /**/
+
+/* HAS_SETGROUPS:
+ * This symbol, if defined, indicates that the setgroups() routine is
+ * available to set the list of process groups. If unavailable, multiple
+ * groups are probably not supported.
+ */
+#define HAS_SETGROUPS /**/
+
+/* HAS_SETHOSTENT:
+ * This symbol, if defined, indicates that the sethostent() routine is
+ * available.
+ */
+#define HAS_SETHOSTENT /**/
+
+/* HAS_SETITIMER:
+ * This symbol, if defined, indicates that the setitimer routine is
+ * available to set interval timers.
+ */
+#define HAS_SETITIMER /**/
+
+/* HAS_SETNETENT:
+ * This symbol, if defined, indicates that the setnetent() routine is
+ * available.
+ */
+#define HAS_SETNETENT /**/
+
+/* HAS_SETPROTOENT:
+ * This symbol, if defined, indicates that the setprotoent() routine is
+ * available.
+ */
+#define HAS_SETPROTOENT /**/
+
+/* HAS_SETPGRP:
+ * This symbol, if defined, indicates that the setpgrp routine is
+ * available to set the current process group.
+ */
+/* USE_BSD_SETPGRP:
+ * This symbol, if defined, indicates that setpgrp needs two
+ * arguments whereas USG one needs none. See also HAS_SETPGID
+ * for a POSIX interface.
+ */
+#define HAS_SETPGRP /**/
+/*#define USE_BSD_SETPGRP / **/
+
+/* HAS_SETPROCTITLE:
+ * This symbol, if defined, indicates that the setproctitle routine is
+ * available to set process title.
+ */
+/*#define HAS_SETPROCTITLE / **/
+
+/* HAS_SETPWENT:
+ * This symbol, if defined, indicates that the setpwent routine is
+ * available for initializing sequential access of the passwd database.
+ */
+#define HAS_SETPWENT /**/
+
+/* HAS_SETPWENT_R:
+ * This symbol, if defined, indicates that the setpwent_r routine
+ * is available to setpwent re-entrantly.
+ */
+/* SETPWENT_R_PROTO:
+ * This symbol encodes the prototype of setpwent_r.
+ * It is zero if d_setpwent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setpwent_r
+ * is defined.
+ */
+/*#define HAS_SETPWENT_R / **/
+#define SETPWENT_R_PROTO 0 /**/
+
+/* HAS_SETSERVENT:
+ * This symbol, if defined, indicates that the setservent() routine is
+ * available.
+ */
+#define HAS_SETSERVENT /**/
+
+/* HAS_SETVBUF:
+ * This symbol, if defined, indicates that the setvbuf routine is
+ * available to change buffering on an open stdio stream.
+ * to a line-buffered mode.
+ */
+#define HAS_SETVBUF /**/
+
+/* USE_SFIO:
+ * This symbol, if defined, indicates that sfio should
+ * be used.
+ */
+/*#define USE_SFIO / **/
+
+/* HAS_SHM:
+ * This symbol, if defined, indicates that the entire shm*(2) library is
+ * supported.
+ */
+#define HAS_SHM /**/
+
+/* HAS_SIGACTION:
+ * This symbol, if defined, indicates that Vr4's sigaction() routine
+ * is available.
+ */
+#define HAS_SIGACTION /**/
+
+/* HAS_SIGSETJMP:
+ * This variable indicates to the C program that the sigsetjmp()
+ * routine is available to save the calling process's registers
+ * and stack environment for later use by siglongjmp(), and
+ * to optionally save the process's signal mask. See
+ * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
+ */
+/* Sigjmp_buf:
+ * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
+ */
+/* Sigsetjmp:
+ * This macro is used in the same way as sigsetjmp(), but will invoke
+ * traditional setjmp() if sigsetjmp isn't available.
+ * See HAS_SIGSETJMP.
+ */
+/* Siglongjmp:
+ * This macro is used in the same way as siglongjmp(), but will invoke
+ * traditional longjmp() if siglongjmp isn't available.
+ * See HAS_SIGSETJMP.
+ */
+#define HAS_SIGSETJMP /**/
+#ifdef HAS_SIGSETJMP
+#define Sigjmp_buf sigjmp_buf
+#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
+#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
+#else
+#define Sigjmp_buf jmp_buf
+#define Sigsetjmp(buf,save_mask) setjmp((buf))
+#define Siglongjmp(buf,retval) longjmp((buf),(retval))
+#endif
/* HAS_SOCKET:
* This symbol, if defined, indicates that the BSD socket interface is
#define HAS_MSG_PROXY /**/
#define HAS_SCM_RIGHTS /**/
+/* HAS_SOCKS5_INIT:
+ * This symbol, if defined, indicates that the socks5_init routine is
+ * available to initialize SOCKS 5.
+ */
+/*#define HAS_SOCKS5_INIT / **/
+
+/* HAS_SQRTL:
+ * This symbol, if defined, indicates that the sqrtl routine is
+ * available to do long double square roots.
+ */
+#define HAS_SQRTL /**/
+
+/* HAS_SRAND48_R:
+ * This symbol, if defined, indicates that the srand48_r routine
+ * is available to srand48 re-entrantly.
+ */
+/* SRAND48_R_PROTO:
+ * This symbol encodes the prototype of srand48_r.
+ * It is zero if d_srand48_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_srand48_r
+ * is defined.
+ */
+/*#define HAS_SRAND48_R / **/
+#define SRAND48_R_PROTO 0 /**/
+
+/* HAS_SRANDOM_R:
+ * This symbol, if defined, indicates that the srandom_r routine
+ * is available to srandom re-entrantly.
+ */
+/* SRANDOM_R_PROTO:
+ * This symbol encodes the prototype of srandom_r.
+ * It is zero if d_srandom_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_srandom_r
+ * is defined.
+ */
+/*#define HAS_SRANDOM_R / **/
+#define SRANDOM_R_PROTO 0 /**/
+
/* USE_STAT_BLOCKS:
* This symbol is defined if this system has a stat structure declaring
* st_blksize and st_blocks.
#define USE_STAT_BLOCKS /**/
#endif
-/* HAS_STRERROR:
- * This symbol, if defined, indicates that the strerror routine is
- * available to translate error numbers to strings. See the writeup
- * of Strerror() in this file before you try to define your own.
- */
-/* HAS_SYS_ERRLIST:
- * This symbol, if defined, indicates that the sys_errlist array is
- * available to translate error numbers to strings. The extern int
- * sys_nerr gives the size of that table.
- */
-/* Strerror:
- * This preprocessor symbol is defined as a macro if strerror() is
- * not available to translate error numbers to strings but sys_errlist[]
- * array is there.
+/* HAS_STRUCT_STATFS_F_FLAGS:
+ * This symbol, if defined, indicates that the struct statfs
+ * does have the f_flags member containing the mount flags of
+ * the filesystem containing the file.
+ * This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3),
+ * not from <sys/statfs.h> (SYSV). Older BSDs (like Ultrix) do not
+ * have statfs() and struct statfs, they have ustat() and getmnt()
+ * with struct ustat and struct fs_data.
*/
-#define HAS_STRERROR /**/
-#define HAS_SYS_ERRLIST /**/
-#define Strerror(e) strerror(e)
+/*#define HAS_STRUCT_STATFS_F_FLAGS / **/
-/* HAS_STRTOUL:
- * This symbol, if defined, indicates that the strtoul routine is
- * available to provide conversion of strings to unsigned long.
+/* HAS_STRUCT_STATFS:
+ * This symbol, if defined, indicates that the struct statfs
+ * to do statfs() is supported.
*/
-#define HAS_STRTOUL /**/
+#define HAS_STRUCT_STATFS /**/
+
+/* HAS_FSTATVFS:
+ * This symbol, if defined, indicates that the fstatvfs routine is
+ * available to stat filesystems by file descriptors.
+ */
+#define HAS_FSTATVFS /**/
+
+/* USE_STDIO_PTR:
+ * This symbol is defined if the _ptr and _cnt fields (or similar)
+ * of the stdio FILE structure can be used to access the stdio buffer
+ * for a file handle. If this is defined, then the FILE_ptr(fp)
+ * and FILE_cnt(fp) macros will also be defined and should be used
+ * to access these fields.
+ */
+/* FILE_ptr:
+ * This macro is used to access the _ptr field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_PTR is defined.
+ */
+/* STDIO_PTR_LVALUE:
+ * This symbol is defined if the FILE_ptr macro can be used as an
+ * lvalue.
+ */
+/* FILE_cnt:
+ * This macro is used to access the _cnt field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_PTR is defined.
+ */
+/* STDIO_CNT_LVALUE:
+ * This symbol is defined if the FILE_cnt macro can be used as an
+ * lvalue.
+ */
+/* STDIO_PTR_LVAL_SETS_CNT:
+ * This symbol is defined if using the FILE_ptr macro as an lvalue
+ * to increase the pointer by n has the side effect of decreasing the
+ * value of File_cnt(fp) by n.
+ */
+/* STDIO_PTR_LVAL_NOCHANGE_CNT:
+ * This symbol is defined if using the FILE_ptr macro as an lvalue
+ * to increase the pointer by n leaves File_cnt(fp) unchanged.
+ */
+/*#define USE_STDIO_PTR / **/
+#ifdef USE_STDIO_PTR
+#define FILE_ptr(fp) ((fp)->_IO_read_ptr)
+/*#define STDIO_PTR_LVALUE / **/
+#define FILE_cnt(fp) ((fp)->_IO_read_end - (fp)->_IO_read_ptr)
+/*#define STDIO_CNT_LVALUE / **/
+/*#define STDIO_PTR_LVAL_SETS_CNT / **/
+/*#define STDIO_PTR_LVAL_NOCHANGE_CNT / **/
+#endif
+
+/* USE_STDIO_BASE:
+ * This symbol is defined if the _base field (or similar) of the
+ * stdio FILE structure can be used to access the stdio buffer for
+ * a file handle. If this is defined, then the FILE_base(fp) macro
+ * will also be defined and should be used to access this field.
+ * Also, the FILE_bufsiz(fp) macro will be defined and should be used
+ * to determine the number of bytes in the buffer. USE_STDIO_BASE
+ * will never be defined unless USE_STDIO_PTR is.
+ */
+/* FILE_base:
+ * This macro is used to access the _base field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_BASE is defined.
+ */
+/* FILE_bufsiz:
+ * This macro is used to determine the number of bytes in the I/O
+ * buffer pointed to by _base field (or equivalent) of the FILE
+ * structure pointed to its argument. This macro will always be defined
+ * if USE_STDIO_BASE is defined.
+ */
+/*#define USE_STDIO_BASE / **/
+#ifdef USE_STDIO_BASE
+#define FILE_base(fp) ((fp)->_IO_read_base)
+#define FILE_bufsiz(fp) ((fp)->_IO_read_end - (fp)->_IO_read_base)
+#endif
+
+/* HAS_STRERROR:
+ * This symbol, if defined, indicates that the strerror routine is
+ * available to translate error numbers to strings. See the writeup
+ * of Strerror() in this file before you try to define your own.
+ */
+/* HAS_SYS_ERRLIST:
+ * This symbol, if defined, indicates that the sys_errlist array is
+ * available to translate error numbers to strings. The extern int
+ * sys_nerr gives the size of that table.
+ */
+/* Strerror:
+ * This preprocessor symbol is defined as a macro if strerror() is
+ * not available to translate error numbers to strings but sys_errlist[]
+ * array is there.
+ */
+#define HAS_STRERROR /**/
+#define HAS_SYS_ERRLIST /**/
+#define Strerror(e) strerror(e)
+
+/* HAS_STRERROR_R:
+ * This symbol, if defined, indicates that the strerror_r routine
+ * is available to strerror re-entrantly.
+ */
+/* STRERROR_R_PROTO:
+ * This symbol encodes the prototype of strerror_r.
+ * It is zero if d_strerror_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_strerror_r
+ * is defined.
+ */
+/*#define HAS_STRERROR_R / **/
+#define STRERROR_R_PROTO 0 /**/
+
+/* HAS_STRTOLD:
+ * This symbol, if defined, indicates that the strtold routine is
+ * available to convert strings to long doubles.
+ */
+#define HAS_STRTOLD /**/
+
+/* HAS_STRTOLL:
+ * This symbol, if defined, indicates that the strtoll routine is
+ * available to convert strings to long longs.
+ */
+#define HAS_STRTOLL /**/
+
+/* HAS_STRTOQ:
+ * This symbol, if defined, indicates that the strtoq routine is
+ * available to convert strings to long longs (quads).
+ */
+#define HAS_STRTOQ /**/
+
+/* HAS_STRTOUL:
+ * This symbol, if defined, indicates that the strtoul routine is
+ * available to provide conversion of strings to unsigned long.
+ */
+#define HAS_STRTOUL /**/
+
+/* HAS_STRTOULL:
+ * This symbol, if defined, indicates that the strtoull routine is
+ * available to convert strings to unsigned long longs.
+ */
+#define HAS_STRTOULL /**/
+
+/* HAS_STRTOUQ:
+ * This symbol, if defined, indicates that the strtouq routine is
+ * available to convert strings to unsigned long longs (quads).
+ */
+#define HAS_STRTOUQ /**/
+
+/* HAS_TELLDIR_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the telldir() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern long telldir(DIR*);
+ */
+#define HAS_TELLDIR_PROTO /**/
+
+/* HAS_TIME:
+ * This symbol, if defined, indicates that the time() routine exists.
+ */
+/* Time_t:
+ * This symbol holds the type returned by time(). It can be long,
+ * or time_t on BSD sites (in which case <sys/types.h> should be
+ * included).
+ */
+#define HAS_TIME /**/
+#define Time_t time_t /* Time type */
+
+/* HAS_TIMES:
+ * This symbol, if defined, indicates that the times() routine exists.
+ * Note that this became obsolete on some systems (SUNOS), which now
+ * use getrusage(). It may be necessary to include <sys/times.h>.
+ */
+#define HAS_TIMES /**/
+
+/* HAS_TMPNAM_R:
+ * This symbol, if defined, indicates that the tmpnam_r routine
+ * is available to tmpnam re-entrantly.
+ */
+/* TMPNAM_R_PROTO:
+ * This symbol encodes the prototype of tmpnam_r.
+ * It is zero if d_tmpnam_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_tmpnam_r
+ * is defined.
+ */
+/*#define HAS_TMPNAM_R / **/
+#define TMPNAM_R_PROTO 0 /**/
+
+/* HAS_UALARM:
+ * This symbol, if defined, indicates that the ualarm routine is
+ * available to do alarms with microsecond granularity.
+ */
+#define HAS_UALARM /**/
/* HAS_UNION_SEMUN:
* This symbol, if defined, indicates that the union semun is
#define USE_SEMCTL_SEMUN /**/
#define USE_SEMCTL_SEMID_DS /**/
+/* HAS_UNORDERED:
+ * This symbol, if defined, indicates that the unordered routine is
+ * available to check whether two doubles are unordered
+ * (effectively: whether either of them is NaN)
+ */
+/*#define HAS_UNORDERED / **/
+
+/* HAS_USTAT:
+ * This symbol, if defined, indicates that the ustat system call is
+ * available to query file system statistics by dev_t.
+ */
+#define HAS_USTAT /**/
+
/* HAS_VFORK:
* This symbol, if defined, indicates that vfork() exists.
*/
*/
#define Signal_t void /* Signal handler's return type */
-/* Groups_t:
- * This symbol holds the type used for the second argument to
- * getgroups() and setgroups(). Usually, this is the same as
- * gidtype (gid_t) , but sometimes it isn't.
- * It can be int, ushort, gid_t, etc...
- * It may be necessary to include <sys/types.h> to get any
- * typedef'ed information. This is only required if you have
- * getgroups() or setgroups()..
+/* HAS_VPRINTF:
+ * This symbol, if defined, indicates that the vprintf routine is available
+ * to printf with a pointer to an argument list. If unavailable, you
+ * may need to write your own, probably in terms of _doprnt().
*/
-#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
-#define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */
-#endif
-
-/* I_GRP:
- * This symbol, if defined, indicates to the C program that it should
- * include <grp.h>.
+/* USE_CHAR_VSPRINTF:
+ * This symbol is defined if this system has vsprintf() returning type
+ * (char*). The trend seems to be to declare it as "int vsprintf()". It
+ * is up to the package author to declare vsprintf correctly based on the
+ * symbol.
*/
-/* GRPASSWD:
- * This symbol, if defined, indicates to the C program that struct group
- * in <grp.h> contains gr_passwd.
+#define HAS_VPRINTF /**/
+#define USE_CHAR_VSPRINTF /**/
+
+/* HAS_WRITEV:
+ * This symbol, if defined, indicates that the writev routine is
+ * available to do scatter writes.
*/
-#define I_GRP /**/
-#define GRPASSWD /**/
+#define HAS_WRITEV /**/
-/* I_NDBM:
- * This symbol, if defined, indicates that <ndbm.h> exists and should
- * be included.
+/* USE_DYNAMIC_LOADING:
+ * This symbol, if defined, indicates that dynamic loading of
+ * some sort is available.
*/
-#define I_NDBM /**/
+#define USE_DYNAMIC_LOADING /**/
-/* I_NETDB:
- * This symbol, if defined, indicates that <netdb.h> exists and
- * should be included.
+/* DOUBLESIZE:
+ * This symbol contains the size of a double, so that the C preprocessor
+ * can make decisions based on it.
*/
-#define I_NETDB /**/
+#define DOUBLESIZE 8 /**/
-/* I_PWD:
- * This symbol, if defined, indicates to the C program that it should
- * include <pwd.h>.
+/* EBCDIC:
+ * This symbol, if defined, indicates that this system uses
+ * EBCDIC encoding.
*/
-/* PWQUOTA:
+/*#define EBCDIC / **/
+
+/* FFLUSH_NULL:
+ * This symbol, if defined, tells that fflush(NULL) does flush
+ * all pending stdio output.
+ */
+/* FFLUSH_ALL:
+ * This symbol, if defined, tells that to flush
+ * all pending stdio output one must loop through all
+ * the stdio file handles stored in an array and fflush them.
+ * Note that if fflushNULL is defined, fflushall will not
+ * even be probed for and will be left undefined.
+ */
+#define FFLUSH_NULL /**/
+/*#define FFLUSH_ALL / **/
+
+/* Fpos_t:
+ * This symbol holds the type used to declare file positions in libc.
+ * It can be fpos_t, long, uint, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
+ */
+#define Fpos_t fpos_t /* File position type */
+
+/* Gid_t_f:
+ * This symbol defines the format string used for printing a Gid_t.
+ */
+#define Gid_t_f "lu" /**/
+
+/* Gid_t_sign:
+ * This symbol holds the signedess of a Gid_t.
+ * 1 for unsigned, -1 for signed.
+ */
+#define Gid_t_sign 1 /* GID sign */
+
+/* Gid_t_size:
+ * This symbol holds the size of a Gid_t in bytes.
+ */
+#define Gid_t_size 4 /* GID size */
+
+/* Gid_t:
+ * This symbol holds the return type of getgid() and the type of
+ * argument to setrgid() and related functions. Typically,
+ * it is the type of group ids in the kernel. It can be int, ushort,
+ * gid_t, etc... It may be necessary to include <sys/types.h> to get
+ * any typedef'ed information.
+ */
+#define Gid_t gid_t /* Type for getgid(), etc... */
+
+/* Groups_t:
+ * This symbol holds the type used for the second argument to
+ * getgroups() and setgroups(). Usually, this is the same as
+ * gidtype (gid_t) , but sometimes it isn't.
+ * It can be int, ushort, gid_t, etc...
+ * It may be necessary to include <sys/types.h> to get any
+ * typedef'ed information. This is only required if you have
+ * getgroups() or setgroups()..
+ */
+#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
+#define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */
+#endif
+
+/* DB_Prefix_t:
+ * This symbol contains the type of the prefix structure element
+ * in the <db.h> header file. In older versions of DB, it was
+ * int, while in newer ones it is u_int32_t.
+ */
+/* DB_Hash_t:
+ * This symbol contains the type of the prefix structure element
+ * in the <db.h> header file. In older versions of DB, it was
+ * int, while in newer ones it is size_t.
+ */
+/* DB_VERSION_MAJOR_CFG:
+ * This symbol, if defined, defines the major version number of
+ * Berkeley DB found in the <db.h> header when Perl was configured.
+ */
+/* DB_VERSION_MINOR_CFG:
+ * This symbol, if defined, defines the minor version number of
+ * Berkeley DB found in the <db.h> header when Perl was configured.
+ * For DB version 1 this is always 0.
+ */
+/* DB_VERSION_PATCH_CFG:
+ * This symbol, if defined, defines the patch version number of
+ * Berkeley DB found in the <db.h> header when Perl was configured.
+ * For DB version 1 this is always 0.
+ */
+#define DB_Hash_t u_int32_t /**/
+#define DB_Prefix_t size_t /**/
+#define DB_VERSION_MAJOR_CFG 4 /**/
+#define DB_VERSION_MINOR_CFG 1 /**/
+#define DB_VERSION_PATCH_CFG 25 /**/
+
+/* I_FP_CLASS:
+ * This symbol, if defined, indicates that <fp_class.h> exists and
+ * should be included.
+ */
+/*#define I_FP_CLASS / **/
+
+/* I_GRP:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <grp.h>.
+ */
+/* GRPASSWD:
+ * This symbol, if defined, indicates to the C program that struct group
+ * in <grp.h> contains gr_passwd.
+ */
+#define I_GRP /**/
+#define GRPASSWD /**/
+
+/* I_IEEEFP:
+ * This symbol, if defined, indicates that <ieeefp.h> exists and
+ * should be included.
+ */
+/*#define I_IEEEFP / **/
+
+/* I_INTTYPES:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <inttypes.h>.
+ */
+#define I_INTTYPES /**/
+
+/* I_LIBUTIL:
+ * This symbol, if defined, indicates that <libutil.h> exists and
+ * should be included.
+ */
+/*#define I_LIBUTIL / **/
+
+/* I_MACH_CTHREADS:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <mach/cthreads.h>.
+ */
+/*#define I_MACH_CTHREADS / **/
+
+/* I_MNTENT:
+ * This symbol, if defined, indicates that <mntent.h> exists and
+ * should be included.
+ */
+#define I_MNTENT /**/
+
+/* I_NETDB:
+ * This symbol, if defined, indicates that <netdb.h> exists and
+ * should be included.
+ */
+#define I_NETDB /**/
+
+/* I_NETINET_TCP:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <netinet/tcp.h>.
+ */
+#define I_NETINET_TCP /**/
+
+/* I_POLL:
+ * This symbol, if defined, indicates that <poll.h> exists and
+ * should be included.
+ */
+#define I_POLL /**/
+
+/* I_PROT:
+ * This symbol, if defined, indicates that <prot.h> exists and
+ * should be included.
+ */
+/*#define I_PROT / **/
+
+/* I_PTHREAD:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <pthread.h>.
+ */
+#define I_PTHREAD /**/
+
+/* I_PWD:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <pwd.h>.
+ */
+/* PWQUOTA:
* This symbol, if defined, indicates to the C program that struct passwd
* contains pw_quota.
*/
#define PWGECOS /**/
#define PWPASSWD /**/
-/* I_SYSUIO:
- * This symbol, if defined, indicates that <sys/uio.h> exists and
+/* I_SHADOW:
+ * This symbol, if defined, indicates that <shadow.h> exists and
* should be included.
*/
-#define I_SYSUIO /**/
+#define I_SHADOW /**/
-/* I_STDARG:
- * This symbol, if defined, indicates that <stdarg.h> exists and should
- * be included.
+/* I_SOCKS:
+ * This symbol, if defined, indicates that <socks.h> exists and
+ * should be included.
*/
-/* I_VARARGS:
- * This symbol, if defined, indicates to the C program that it should
- * include <varargs.h>.
+/*#define I_SOCKS / **/
+
+/* I_SUNMATH:
+ * This symbol, if defined, indicates that <sunmath.h> exists and
+ * should be included.
*/
-#define I_STDARG /**/
-/*#define I_VARARGS / **/
+/*#define I_SUNMATH / **/
-/* Free_t:
- * This variable contains the return type of free(). It is usually
- * void, but occasionally int.
+/* I_SYSLOG:
+ * This symbol, if defined, indicates that <syslog.h> exists and
+ * should be included.
*/
-/* Malloc_t:
- * This symbol is the type of pointer returned by malloc and realloc.
+#define I_SYSLOG /**/
+
+/* I_SYSMODE:
+ * This symbol, if defined, indicates that <sys/mode.h> exists and
+ * should be included.
*/
-#define Malloc_t void * /**/
-#define Free_t void /**/
+/*#define I_SYSMODE / **/
-/* MYMALLOC:
- * This symbol, if defined, indicates that we're using our own malloc.
+/* I_SYS_MOUNT:
+ * This symbol, if defined, indicates that <sys/mount.h> exists and
+ * should be included.
*/
-/*#define MYMALLOC / **/
+#define I_SYS_MOUNT /**/
-/* CAN_PROTOTYPE:
- * If defined, this macro indicates that the C compiler can handle
- * function prototypes.
+/* I_SYS_STATFS:
+ * This symbol, if defined, indicates that <sys/statfs.h> exists.
*/
-/* _:
- * This macro is used to declare function parameters for folks who want
- * to make declarations with prototypes using a different style than
- * the above macros. Use double parentheses. For example:
- *
- * int main _((int argc, char *argv[]));
+#define I_SYS_STATFS /**/
+
+/* I_SYS_STATVFS:
+ * This symbol, if defined, indicates that <sys/statvfs.h> exists and
+ * should be included.
*/
-#define CAN_PROTOTYPE /**/
-#ifdef CAN_PROTOTYPE
-#define _(args) args
-#else
-#define _(args) ()
-#endif
+#define I_SYS_STATVFS /**/
-/* SH_PATH:
- * This symbol contains the full pathname to the shell used on this
- * on this system to execute Bourne shell scripts. Usually, this will be
- * /bin/sh, though it's possible that some systems will have /bin/ksh,
- * /bin/pdksh, /bin/ash, /bin/bash, or even something such as
- * D:/bin/sh.exe.
+/* I_SYSUIO:
+ * This symbol, if defined, indicates that <sys/uio.h> exists and
+ * should be included.
*/
-#define SH_PATH "/bin/sh" /**/
+#define I_SYSUIO /**/
-/* SIG_NAME:
- * This symbol contains a list of signal names in order of
- * signal number. This is intended
- * to be used as a static array initialization, like this:
- * char *sig_name[] = { SIG_NAME };
- * The signals in the list are separated with commas, and each signal
- * is surrounded by double quotes. There is no leading SIG in the signal
- * name, i.e. SIGQUIT is known as "QUIT".
- * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
- * etc., where nn is the actual signal number (e.g. NUM37).
- * The signal number for sig_name[i] is stored in sig_num[i].
- * The last element is 0 to terminate the list with a NULL. This
- * corresponds to the 0 at the end of the sig_name_init list.
- * Note that this variable is initialized from the sig_name_init,
- * not from sig_name (which is unused).
- */
-/* SIG_NUM:
- * This symbol contains a list of signal numbers, in the same order as the
- * SIG_NAME list. It is suitable for static array initialization, as in:
- * int sig_num[] = { SIG_NUM };
- * The signals in the list are separated with commas, and the indices
- * within that list and the SIG_NAME list match, so it's easy to compute
- * the signal name from a number or vice versa at the price of a small
- * dynamic linear lookup.
- * Duplicates are allowed, but are moved to the end of the list.
- * The signal number corresponding to sig_name[i] is sig_number[i].
- * if (i < NSIG) then sig_number[i] == i.
- * The last element is 0, corresponding to the 0 at the end of
- * the sig_name_init list.
- * Note that this variable is initialized from the sig_num_init,
- * not from sig_num (which is unused).
- */
-/* SIG_SIZE:
- * This variable contains the number of elements of the SIG_NAME
- * and SIG_NUM arrays, excluding the final NULL entry.
+/* I_SYSUTSNAME:
+ * This symbol, if defined, indicates that <sys/utsname.h> exists and
+ * should be included.
*/
-#define SIG_NAME "ZERO", "HUP", "INT", "QUIT", "ILL", "TRAP", "ABRT", "BUS", "FPE", "KILL", "USR1", "SEGV", "USR2", "PIPE", "ALRM", "TERM", "STKFLT", "CHLD", "CONT", "STOP", "TSTP", "TTIN", "TTOU", "URG", "XCPU", "XFSZ", "VTALRM", "PROF", "WINCH", "IO", "PWR", "SYS", "RTMIN", "NUM33", "NUM34", "NUM35", "NUM36", "NUM37", "NUM38", "NUM39", "NUM40", "NUM41", "NUM42", "NUM43", "NUM44", "NUM45", "NUM46", "NUM47", "NUM48", "NUM49", "NUM50", "NUM51", "NUM52", "NUM53", "NUM54", "NUM55", "NUM56", "NUM57", "NUM58", "NUM59", "NUM60", "NUM61", "NUM62", "RTMAX", "IOT", "CLD", "POLL", "UNUSED", 0 /**/
-#define SIG_NUM 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 6, 17, 29, 31, 0 /**/
-#define SIG_SIZE 68 /**/
+#define I_SYSUTSNAME /**/
-/* STDCHAR:
- * This symbol is defined to be the type of char used in stdio.h.
- * It has the values "unsigned char" or "char".
+/* I_SYS_VFS:
+ * This symbol, if defined, indicates that <sys/vfs.h> exists and
+ * should be included.
*/
-#define STDCHAR char /**/
+#define I_SYS_VFS /**/
-/* VOIDFLAGS:
- * This symbol indicates how much support of the void type is given by this
- * compiler. What various bits mean:
- *
- * 1 = supports declaration of void
- * 2 = supports arrays of pointers to functions returning void
- * 4 = supports comparisons between pointers to void functions and
- * addresses of void functions
- * 8 = suports declaration of generic void pointers
- *
- * The package designer should define VOIDUSED to indicate the requirements
- * of the package. This can be done either by #defining VOIDUSED before
- * including config.h, or by defining defvoidused in Myinit.U. If the
- * latter approach is taken, only those flags will be tested. If the
- * level of void support necessary is not present, defines void to int.
+/* I_TIME:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <time.h>.
*/
-#ifndef VOIDUSED
-#define VOIDUSED 15
-#endif
-#define VOIDFLAGS 15
-#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
-#define void int /* is void to be avoided? */
-#define M_VOID /* Xenix strikes again */
-#endif
-
-/* USE_CROSS_COMPILE:
- * This symbol, if defined, indicates that Perl is being cross-compiled.
+/* I_SYS_TIME:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/time.h>.
*/
-/* PERL_TARGETARCH:
- * This symbol, if defined, indicates the target architecture
- * Perl has been cross-compiled to. Undefined if not a cross-compile.
+/* I_SYS_TIME_KERNEL:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/time.h> with KERNEL defined.
*/
-#ifndef USE_CROSS_COMPILE
-/*#define USE_CROSS_COMPILE / **/
-#define PERL_TARGETARCH "" /**/
-#endif
-
-/* HAS_ATOLF:
- * This symbol, if defined, indicates that the atolf routine is
- * available to convert strings into long doubles.
+/* HAS_TM_TM_ZONE:
+ * This symbol, if defined, indicates to the C program that
+ * the struct tm has a tm_zone field.
*/
-/*#define HAS_ATOLF / **/
-
-/* HAS_ATOLL:
- * This symbol, if defined, indicates that the atoll routine is
- * available to convert strings into long longs.
+/* HAS_TM_TM_GMTOFF:
+ * This symbol, if defined, indicates to the C program that
+ * the struct tm has a tm_gmtoff field.
*/
-#define HAS_ATOLL /**/
+#define I_TIME /**/
+#define I_SYS_TIME /**/
+/*#define I_SYS_TIME_KERNEL / **/
+#define HAS_TM_TM_ZONE /**/
+#define HAS_TM_TM_GMTOFF /**/
-/* HAS__FWALK:
- * This symbol, if defined, indicates that the _fwalk system call is
- * available to apply a function to all the file handles.
+/* I_USTAT:
+ * This symbol, if defined, indicates that <ustat.h> exists and
+ * should be included.
*/
-/*#define HAS__FWALK / **/
+#define I_USTAT /**/
-/* HAS_AINTL:
- * This symbol, if defined, indicates that the aintl routine is
- * available. If copysignl is also present we can emulate modfl.
+/* PERL_INC_VERSION_LIST:
+ * This variable specifies the list of subdirectories in over
+ * which perl.c:incpush() and lib/lib.pm will automatically
+ * search when adding directories to @INC, in a format suitable
+ * for a C initialization string. See the inc_version_list entry
+ * in Porting/Glossary for more details.
*/
-/*#define HAS_AINTL / **/
+#define PERL_INC_VERSION_LIST 0 /**/
-/* HAS_CLASS:
- * This symbol, if defined, indicates that the class routine is
- * available to classify doubles. Available for example in AIX.
- * The returned values are defined in <float.h> and are:
- *
- * FP_PLUS_NORM Positive normalized, nonzero
- * FP_MINUS_NORM Negative normalized, nonzero
- * FP_PLUS_DENORM Positive denormalized, nonzero
- * FP_MINUS_DENORM Negative denormalized, nonzero
- * FP_PLUS_ZERO +0.0
- * FP_MINUS_ZERO -0.0
- * FP_PLUS_INF +INF
- * FP_MINUS_INF -INF
- * FP_NANS Signaling Not a Number (NaNS)
- * FP_NANQ Quiet Not a Number (NaNQ)
+/* INSTALL_USR_BIN_PERL:
+ * This symbol, if defined, indicates that Perl is to be installed
+ * also as /usr/bin/perl.
*/
-/*#define HAS_CLASS / **/
+/*#define INSTALL_USR_BIN_PERL / **/
-/* HAS_STRUCT_CMSGHDR:
- * This symbol, if defined, indicates that the struct cmsghdr
- * is supported.
+/* INTSIZE:
+ * This symbol contains the value of sizeof(int) so that the C
+ * preprocessor can make decisions based on it.
*/
-#define HAS_STRUCT_CMSGHDR /**/
-
-/* HAS_COPYSIGNL:
- * This symbol, if defined, indicates that the copysignl routine is
- * available. If aintl is also present we can emulate modfl.
+/* LONGSIZE:
+ * This symbol contains the value of sizeof(long) so that the C
+ * preprocessor can make decisions based on it.
*/
-#define HAS_COPYSIGNL /**/
-
-/* HAS_DBMINIT_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the dbminit() function. Otherwise, it is up
- * to the program to supply one. A good guess is
- * extern int dbminit(char *);
+/* SHORTSIZE:
+ * This symbol contains the value of sizeof(short) so that the C
+ * preprocessor can make decisions based on it.
*/
-/*#define HAS_DBMINIT_PROTO / **/
+#define INTSIZE 4 /**/
+#define LONGSIZE 4 /**/
+#define SHORTSIZE 2 /**/
-/* HAS_DIRFD:
- * This manifest constant lets the C program know that dirfd
- * is available.
+/* PERL_PRIfldbl:
+ * This symbol, if defined, contains the string used by stdio to
+ * format long doubles (format 'f') for output.
*/
-#define HAS_DIRFD /**/
-
-/* DLSYM_NEEDS_UNDERSCORE:
- * This symbol, if defined, indicates that we need to prepend an
- * underscore to the symbol name before calling dlsym(). This only
- * makes sense if you *have* dlsym, which we will presume is the
- * case if you're using dl_dlopen.xs.
+/* PERL_PRIgldbl:
+ * This symbol, if defined, contains the string used by stdio to
+ * format long doubles (format 'g') for output.
*/
-/*#define DLSYM_NEEDS_UNDERSCORE / **/
-
-/* HAS_FAST_STDIO:
- * This symbol, if defined, indicates that the "fast stdio"
- * is available to manipulate the stdio buffers directly.
+/* PERL_PRIeldbl:
+ * This symbol, if defined, contains the string used by stdio to
+ * format long doubles (format 'e') for output.
*/
-#define HAS_FAST_STDIO /**/
-
-/* HAS_FCHDIR:
- * This symbol, if defined, indicates that the fchdir routine is
- * available to change directory using a file descriptor.
+/* PERL_SCNfldbl:
+ * This symbol, if defined, contains the string used by stdio to
+ * format long doubles (format 'f') for input.
*/
-#define HAS_FCHDIR /**/
+#define PERL_PRIfldbl "Lf" /**/
+#define PERL_PRIgldbl "Lg" /**/
+#define PERL_PRIeldbl "Le" /**/
+#define PERL_SCNfldbl "Lf" /**/
-/* FCNTL_CAN_LOCK:
- * This symbol, if defined, indicates that fcntl() can be used
- * for file locking. Normally on Unix systems this is defined.
- * It may be undefined on VMS.
+/* Off_t:
+ * This symbol holds the type used to declare offsets in the kernel.
+ * It can be int, long, off_t, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
*/
-#define FCNTL_CAN_LOCK /**/
+/* LSEEKSIZE:
+ * This symbol holds the number of bytes used by the Off_t.
+ */
+/* Off_t_size:
+ * This symbol holds the number of bytes used by the Off_t.
+ */
+#define Off_t off_t /* <offset> type */
+#define LSEEKSIZE 8 /* <offset> size */
+#define Off_t_size 8 /* <offset> size */
-/* HAS_FINITE:
- * This symbol, if defined, indicates that the finite routine is
- * available to check whether a double is finite (non-infinity non-NaN).
+/* Free_t:
+ * This variable contains the return type of free(). It is usually
+ * void, but occasionally int.
*/
-#define HAS_FINITE /**/
+/* Malloc_t:
+ * This symbol is the type of pointer returned by malloc and realloc.
+ */
+#define Malloc_t void * /**/
+#define Free_t void /**/
-/* HAS_FINITEL:
- * This symbol, if defined, indicates that the finitel routine is
- * available to check whether a long double is finite
- * (non-infinity non-NaN).
+/* PERL_MALLOC_WRAP:
+ * This symbol, if defined, indicates that we'd like malloc wrap checks.
*/
-#define HAS_FINITEL /**/
+#define PERL_MALLOC_WRAP
-/* HAS_FLOCK_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the flock() function. Otherwise, it is up
- * to the program to supply one. A good guess is
- * extern int flock(int, int);
+/* MYMALLOC:
+ * This symbol, if defined, indicates that we're using our own malloc.
*/
-#define HAS_FLOCK_PROTO /**/
+/*#define MYMALLOC / **/
-/* HAS_FP_CLASS:
- * This symbol, if defined, indicates that the fp_class routine is
- * available to classify doubles. Available for example in Digital UNIX.
- * The returned values are defined in <math.h> and are:
- *
- * FP_SNAN Signaling NaN (Not-a-Number)
- * FP_QNAN Quiet NaN (Not-a-Number)
- * FP_POS_INF +infinity
- * FP_NEG_INF -infinity
- * FP_POS_NORM Positive normalized
- * FP_NEG_NORM Negative normalized
- * FP_POS_DENORM Positive denormalized
- * FP_NEG_DENORM Negative denormalized
- * FP_POS_ZERO +0.0 (positive zero)
- * FP_NEG_ZERO -0.0 (negative zero)
+/* Mode_t:
+ * This symbol holds the type used to declare file modes
+ * for systems calls. It is usually mode_t, but may be
+ * int or unsigned short. It may be necessary to include <sys/types.h>
+ * to get any typedef'ed information.
*/
-/*#define HAS_FP_CLASS / **/
+#define Mode_t mode_t /* file mode parameter for system calls */
-/* HAS_FPCLASS:
- * This symbol, if defined, indicates that the fpclass routine is
- * available to classify doubles. Available for example in Solaris/SVR4.
- * The returned values are defined in <ieeefp.h> and are:
- *
- * FP_SNAN signaling NaN
- * FP_QNAN quiet NaN
- * FP_NINF negative infinity
- * FP_PINF positive infinity
- * FP_NDENORM negative denormalized non-zero
- * FP_PDENORM positive denormalized non-zero
- * FP_NZERO negative zero
- * FP_PZERO positive zero
- * FP_NNORM negative normalized non-zero
- * FP_PNORM positive normalized non-zero
+/* MULTIARCH:
+ * This symbol, if defined, signifies that the build
+ * process will produce some binary files that are going to be
+ * used in a cross-platform environment. This is the case for
+ * example with the NeXT "fat" binaries that contain executables
+ * for several CPUs.
*/
-/*#define HAS_FPCLASS / **/
+/*#define MULTIARCH / **/
-/* HAS_FPCLASSIFY:
- * This symbol, if defined, indicates that the fpclassify routine is
- * available to classify doubles. Available for example in HP-UX.
- * The returned values are defined in <math.h> and are
- *
- * FP_NORMAL Normalized
- * FP_ZERO Zero
- * FP_INFINITE Infinity
- * FP_SUBNORMAL Denormalized
- * FP_NAN NaN
- *
+/* VAL_O_NONBLOCK:
+ * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
+ * non-blocking I/O for the file descriptor. Note that there is no way
+ * back, i.e. you cannot turn it blocking again this way. If you wish to
+ * alternatively switch between blocking and non-blocking, use the
+ * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
*/
-/*#define HAS_FPCLASSIFY / **/
-
-/* HAS_FPCLASSL:
- * This symbol, if defined, indicates that the fpclassl routine is
- * available to classify long doubles. Available for example in IRIX.
- * The returned values are defined in <ieeefp.h> and are:
- *
- * FP_SNAN signaling NaN
- * FP_QNAN quiet NaN
- * FP_NINF negative infinity
- * FP_PINF positive infinity
- * FP_NDENORM negative denormalized non-zero
- * FP_PDENORM positive denormalized non-zero
- * FP_NZERO negative zero
- * FP_PZERO positive zero
- * FP_NNORM negative normalized non-zero
- * FP_PNORM positive normalized non-zero
+/* VAL_EAGAIN:
+ * This symbol holds the errno error code set by read() when no data was
+ * present on the non-blocking file descriptor.
*/
-/*#define HAS_FPCLASSL / **/
-
-/* HAS_FPOS64_T:
- * This symbol will be defined if the C compiler supports fpos64_t.
+/* RD_NODATA:
+ * This symbol holds the return code from read() when no data is present
+ * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
+ * not defined, then you can't distinguish between no data and EOF by
+ * issuing a read(). You'll have to find another way to tell for sure!
*/
-/*#define HAS_FPOS64_T / **/
-
-/* HAS_FREXPL:
- * This symbol, if defined, indicates that the frexpl routine is
- * available to break a long double floating-point number into
- * a normalized fraction and an integral power of 2.
+/* EOF_NONBLOCK:
+ * This symbol, if defined, indicates to the C program that a read() on
+ * a non-blocking file descriptor will return 0 on EOF, and not the value
+ * held in RD_NODATA (-1 usually, in that case!).
*/
-#define HAS_FREXPL /**/
+#define VAL_O_NONBLOCK O_NONBLOCK
+#define VAL_EAGAIN EAGAIN
+#define RD_NODATA -1
+#define EOF_NONBLOCK
-/* HAS_STRUCT_FS_DATA:
- * This symbol, if defined, indicates that the struct fs_data
- * to do statfs() is supported.
+/* NEED_VA_COPY:
+ * This symbol, if defined, indicates that the system stores
+ * the variable argument list datatype, va_list, in a format
+ * that cannot be copied by simple assignment, so that some
+ * other means must be used when copying is required.
+ * As such systems vary in their provision (or non-provision)
+ * of copying mechanisms, handy.h defines a platform-
+ * independent macro, Perl_va_copy(src, dst), to do the job.
*/
-/*#define HAS_STRUCT_FS_DATA / **/
+/*#define NEED_VA_COPY / **/
-/* HAS_FSEEKO:
- * This symbol, if defined, indicates that the fseeko routine is
- * available to fseek beyond 32 bits (useful for ILP32 hosts).
+/* Netdb_host_t:
+ * This symbol holds the type used for the 1st argument
+ * to gethostbyaddr().
*/
-#define HAS_FSEEKO /**/
-
-/* HAS_FSTATFS:
- * This symbol, if defined, indicates that the fstatfs routine is
- * available to stat filesystems by file descriptors.
+/* Netdb_hlen_t:
+ * This symbol holds the type used for the 2nd argument
+ * to gethostbyaddr().
*/
-#define HAS_FSTATFS /**/
-
-/* HAS_FSYNC:
- * This symbol, if defined, indicates that the fsync routine is
- * available to write a file's modified data and attributes to
- * permanent storage.
+/* Netdb_name_t:
+ * This symbol holds the type used for the argument to
+ * gethostbyname().
*/
-#define HAS_FSYNC /**/
-
-/* HAS_FTELLO:
- * This symbol, if defined, indicates that the ftello routine is
- * available to ftell beyond 32 bits (useful for ILP32 hosts).
+/* Netdb_net_t:
+ * This symbol holds the type used for the 1st argument to
+ * getnetbyaddr().
*/
-#define HAS_FTELLO /**/
+#define Netdb_host_t const void * /**/
+#define Netdb_hlen_t size_t /**/
+#define Netdb_name_t const char * /**/
+#define Netdb_net_t in_addr_t /**/
-/* HAS_GETCWD:
- * This symbol, if defined, indicates that the getcwd routine is
- * available to get the current working directory.
+/* PERL_OTHERLIBDIRS:
+ * This variable contains a colon-separated set of paths for the perl
+ * binary to search for additional library files or modules.
+ * These directories will be tacked to the end of @INC.
+ * Perl will automatically search below each path for version-
+ * and architecture-specific directories. See PERL_INC_VERSION_LIST
+ * for more details.
*/
-#define HAS_GETCWD /**/
+/*#define PERL_OTHERLIBDIRS " " / **/
-/* HAS_GETESPWNAM:
- * This symbol, if defined, indicates that the getespwnam system call is
- * available to retrieve enchanced (shadow) password entries by name.
+/* IVTYPE:
+ * This symbol defines the C type used for Perl's IV.
*/
-/*#define HAS_GETESPWNAM / **/
-
-/* HAS_GETFSSTAT:
- * This symbol, if defined, indicates that the getfsstat routine is
- * available to stat filesystems in bulk.
+/* UVTYPE:
+ * This symbol defines the C type used for Perl's UV.
*/
-/*#define HAS_GETFSSTAT / **/
-
-/* HAS_GETITIMER:
- * This symbol, if defined, indicates that the getitimer routine is
- * available to return interval timers.
+/* I8TYPE:
+ * This symbol defines the C type used for Perl's I8.
*/
-#define HAS_GETITIMER /**/
-
-/* HAS_GETMNT:
- * This symbol, if defined, indicates that the getmnt routine is
- * available to get filesystem mount info by filename.
+/* U8TYPE:
+ * This symbol defines the C type used for Perl's U8.
*/
-/*#define HAS_GETMNT / **/
-
-/* HAS_GETMNTENT:
- * This symbol, if defined, indicates that the getmntent routine is
- * available to iterate through mounted file systems to get their info.
+/* I16TYPE:
+ * This symbol defines the C type used for Perl's I16.
*/
-#define HAS_GETMNTENT /**/
-
-/* HAS_GETPRPWNAM:
- * This symbol, if defined, indicates that the getprpwnam system call is
- * available to retrieve protected (shadow) password entries by name.
+/* U16TYPE:
+ * This symbol defines the C type used for Perl's U16.
*/
-/*#define HAS_GETPRPWNAM / **/
-
-/* HAS_GETSPNAM:
- * This symbol, if defined, indicates that the getspnam system call is
- * available to retrieve SysV shadow password entries by name.
+/* I32TYPE:
+ * This symbol defines the C type used for Perl's I32.
*/
-#define HAS_GETSPNAM /**/
-
-/* HAS_HASMNTOPT:
- * This symbol, if defined, indicates that the hasmntopt routine is
- * available to query the mount options of file systems.
+/* U32TYPE:
+ * This symbol defines the C type used for Perl's U32.
*/
-#define HAS_HASMNTOPT /**/
-
-/* HAS_ILOGBL:
- * This symbol, if defined, indicates that the ilogbl routine is
- * available. If scalbnl is also present we can emulate frexpl.
+/* I64TYPE:
+ * This symbol defines the C type used for Perl's I64.
*/
-#define HAS_ILOGBL /**/
-
-/* HAS_INT64_T:
- * This symbol will defined if the C compiler supports int64_t.
- * Usually the <inttypes.h> needs to be included, but sometimes
- * <sys/types.h> is enough.
+/* U64TYPE:
+ * This symbol defines the C type used for Perl's U64.
*/
-#define HAS_INT64_T /**/
-
-/* HAS_ISFINITE:
- * This symbol, if defined, indicates that the isfinite routine is
- * available to check whether a double is finite (non-infinity non-NaN).
+/* NVTYPE:
+ * This symbol defines the C type used for Perl's NV.
*/
-/*#define HAS_ISFINITE / **/
-
-/* HAS_ISINF:
- * This symbol, if defined, indicates that the isinf routine is
- * available to check whether a double is an infinity.
+/* IVSIZE:
+ * This symbol contains the sizeof(IV).
*/
-#define HAS_ISINF /**/
-
-/* HAS_ISNAN:
- * This symbol, if defined, indicates that the isnan routine is
- * available to check whether a double is a NaN.
+/* UVSIZE:
+ * This symbol contains the sizeof(UV).
*/
-#define HAS_ISNAN /**/
-
-/* HAS_ISNANL:
- * This symbol, if defined, indicates that the isnanl routine is
- * available to check whether a long double is a NaN.
- */
-#define HAS_ISNANL /**/
-
-/* HAS_LDBL_DIG:
- * This symbol, if defined, indicates that this system's <float.h>
- * or <limits.h> defines the symbol LDBL_DIG, which is the number
- * of significant digits in a long double precision number. Unlike
- * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
+/* I8SIZE:
+ * This symbol contains the sizeof(I8).
*/
-#define HAS_LDBL_DIG /* */
-
-/* HAS_MADVISE:
- * This symbol, if defined, indicates that the madvise system call is
- * available to map a file into memory.
+/* U8SIZE:
+ * This symbol contains the sizeof(U8).
*/
-#define HAS_MADVISE /**/
-
-/* HAS_MKDTEMP:
- * This symbol, if defined, indicates that the mkdtemp routine is
- * available to exclusively create a uniquely named temporary directory.
+/* I16SIZE:
+ * This symbol contains the sizeof(I16).
*/
-#define HAS_MKDTEMP /**/
-
-/* HAS_MKSTEMPS:
- * This symbol, if defined, indicates that the mkstemps routine is
- * available to excluslvely create and open a uniquely named
- * (with a suffix) temporary file.
+/* U16SIZE:
+ * This symbol contains the sizeof(U16).
*/
-/*#define HAS_MKSTEMPS / **/
-
-/* HAS_MODFL:
- * This symbol, if defined, indicates that the modfl routine is
- * available to split a long double x into a fractional part f and
- * an integer part i such that |f| < 1.0 and (f + i) = x.
+/* I32SIZE:
+ * This symbol contains the sizeof(I32).
*/
-/* HAS_MODFL_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the modfl() function. Otherwise, it is up
- * to the program to supply one.
+/* U32SIZE:
+ * This symbol contains the sizeof(U32).
*/
-/* HAS_MODFL_POW32_BUG:
- * This symbol, if defined, indicates that the modfl routine is
- * broken for long doubles >= pow(2, 32).
- * For example from 4294967303.150000 one would get 4294967302.000000
- * and 1.150000. The bug has been seen in certain versions of glibc,
- * release 2.2.2 is known to be okay.
+/* I64SIZE:
+ * This symbol contains the sizeof(I64).
*/
-#define HAS_MODFL /**/
-/*#define HAS_MODFL_PROTO / **/
-/*#define HAS_MODFL_POW32_BUG / **/
-
-/* HAS_MPROTECT:
- * This symbol, if defined, indicates that the mprotect system call is
- * available to modify the access protection of a memory mapped file.
+/* U64SIZE:
+ * This symbol contains the sizeof(U64).
*/
-#define HAS_MPROTECT /**/
-
-/* HAS_STRUCT_MSGHDR:
- * This symbol, if defined, indicates that the struct msghdr
- * is supported.
+/* NVSIZE:
+ * This symbol contains the sizeof(NV).
*/
-#define HAS_STRUCT_MSGHDR /**/
-
-/* HAS_NL_LANGINFO:
- * This symbol, if defined, indicates that the nl_langinfo routine is
- * available to return local data. You will also need <langinfo.h>
- * and therefore I_LANGINFO.
+/* NV_PRESERVES_UV:
+ * This symbol, if defined, indicates that a variable of type NVTYPE
+ * can preserve all the bits of a variable of type UVTYPE.
*/
-#define HAS_NL_LANGINFO /**/
-
-/* HAS_OFF64_T:
- * This symbol will be defined if the C compiler supports off64_t.
+/* NV_PRESERVES_UV_BITS:
+ * This symbol contains the number of bits a variable of type NVTYPE
+ * can preserve of a variable of type UVTYPE.
*/
-/*#define HAS_OFF64_T / **/
+#define IVTYPE long /**/
+#define UVTYPE unsigned long /**/
+#define I8TYPE char /**/
+#define U8TYPE unsigned char /**/
+#define I16TYPE short /**/
+#define U16TYPE unsigned short /**/
+#define I32TYPE long /**/
+#define U32TYPE unsigned long /**/
+#ifdef HAS_QUAD
+#define I64TYPE long long /**/
+#define U64TYPE unsigned long long /**/
+#endif
+#define NVTYPE double /**/
+#define IVSIZE 4 /**/
+#define UVSIZE 4 /**/
+#define I8SIZE 1 /**/
+#define U8SIZE 1 /**/
+#define I16SIZE 2 /**/
+#define U16SIZE 2 /**/
+#define I32SIZE 4 /**/
+#define U32SIZE 4 /**/
+#ifdef HAS_QUAD
+#define I64SIZE 8 /**/
+#define U64SIZE 8 /**/
+#endif
+#define NVSIZE 8 /**/
+#define NV_PRESERVES_UV
+#define NV_PRESERVES_UV_BITS 32
+#if UVSIZE == 8
+# ifdef BYTEORDER
+# if BYTEORDER == 0x1234
+# undef BYTEORDER
+# define BYTEORDER 0x12345678
+# else
+# if BYTEORDER == 0x4321
+# undef BYTEORDER
+# define BYTEORDER 0x87654321
+# endif
+# endif
+# endif
+#endif
-/* HAS_PROCSELFEXE:
- * This symbol is defined if PROCSELFEXE_PATH is a symlink
- * to the absolute pathname of the executing program.
+/* IVdf:
+ * This symbol defines the format string used for printing a Perl IV
+ * as a signed decimal integer.
*/
-/* PROCSELFEXE_PATH:
- * If HAS_PROCSELFEXE is defined this symbol is the filename
- * of the symbolic link pointing to the absolute pathname of
- * the executing program.
+/* UVuf:
+ * This symbol defines the format string used for printing a Perl UV
+ * as an unsigned decimal integer.
*/
-#define HAS_PROCSELFEXE /**/
-#if defined(HAS_PROCSELFEXE) && !defined(PROCSELFEXE_PATH)
-#define PROCSELFEXE_PATH "/proc/self/exe" /**/
-#endif
-
-/* HAS_PTHREAD_ATTR_SETSCOPE:
- * This symbol, if defined, indicates that the pthread_attr_setscope
- * system call is available to set the contention scope attribute of
- * a thread attribute object.
+/* UVof:
+ * This symbol defines the format string used for printing a Perl UV
+ * as an unsigned octal integer.
*/
-#define HAS_PTHREAD_ATTR_SETSCOPE /**/
-
-/* HAS_READV:
- * This symbol, if defined, indicates that the readv routine is
- * available to do gather reads. You will also need <sys/uio.h>
- * and there I_SYSUIO.
+/* UVxf:
+ * This symbol defines the format string used for printing a Perl UV
+ * as an unsigned hexadecimal integer in lowercase abcdef.
*/
-#define HAS_READV /**/
-
-/* HAS_RECVMSG:
- * This symbol, if defined, indicates that the recvmsg routine is
- * available to send structured socket messages.
+/* UVXf:
+ * This symbol defines the format string used for printing a Perl UV
+ * as an unsigned hexadecimal integer in uppercase ABCDEF.
*/
-#define HAS_RECVMSG /**/
-
-/* HAS_SBRK_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the sbrk() function. Otherwise, it is up
- * to the program to supply one. Good guesses are
- * extern void* sbrk(int);
- * extern void* sbrk(size_t);
+/* NVef:
+ * This symbol defines the format string used for printing a Perl NV
+ * using %e-ish floating point format.
*/
-#define HAS_SBRK_PROTO /**/
-
-/* HAS_SCALBNL:
- * This symbol, if defined, indicates that the scalbnl routine is
- * available. If ilogbl is also present we can emulate frexpl.
+/* NVff:
+ * This symbol defines the format string used for printing a Perl NV
+ * using %f-ish floating point format.
*/
-#define HAS_SCALBNL /**/
-
-/* HAS_SENDMSG:
- * This symbol, if defined, indicates that the sendmsg routine is
- * available to send structured socket messages.
+/* NVgf:
+ * This symbol defines the format string used for printing a Perl NV
+ * using %g-ish floating point format.
*/
-#define HAS_SENDMSG /**/
+#define IVdf "ld" /**/
+#define UVuf "lu" /**/
+#define UVof "lo" /**/
+#define UVxf "lx" /**/
+#define UVXf "lX" /**/
+#define NVef "e" /**/
+#define NVff "f" /**/
+#define NVgf "g" /**/
-/* HAS_SETITIMER:
- * This symbol, if defined, indicates that the setitimer routine is
- * available to set interval timers.
+/* Pid_t:
+ * This symbol holds the type used to declare process ids in the kernel.
+ * It can be int, uint, pid_t, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
*/
-#define HAS_SETITIMER /**/
+#define Pid_t pid_t /* PID type */
-/* HAS_SETPROCTITLE:
- * This symbol, if defined, indicates that the setproctitle routine is
- * available to set process title.
+/* PRIVLIB:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
*/
-/*#define HAS_SETPROCTITLE / **/
-
-/* USE_SFIO:
- * This symbol, if defined, indicates that sfio should
- * be used.
+/* PRIVLIB_EXP:
+ * This symbol contains the ~name expanded version of PRIVLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
*/
-/*#define USE_SFIO / **/
+#define PRIVLIB "/opt/perl/lib/5.9.2" /**/
+#define PRIVLIB_EXP "/opt/perl/lib/5.9.2" /**/
-/* HAS_SIGPROCMASK:
- * This symbol, if defined, indicates that the sigprocmask
- * system call is available to examine or change the signal mask
- * of the calling process.
+/* PTRSIZE:
+ * This symbol contains the size of a pointer, so that the C preprocessor
+ * can make decisions based on it. It will be sizeof(void *) if
+ * the compiler supports (void *); otherwise it will be
+ * sizeof(char *).
*/
-#define HAS_SIGPROCMASK /**/
+#define PTRSIZE 4 /**/
-/* HAS_SOCKATMARK:
- * This symbol, if defined, indicates that the sockatmark routine is
- * available to test whether a socket is at the out-of-band mark.
+/* HAS_QUAD:
+ * This symbol, if defined, tells that there's a 64-bit integer type,
+ * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one
+ * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T.
*/
-#define HAS_SOCKATMARK /**/
-
-/* HAS_SOCKATMARK_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the sockatmark() function. Otherwise, it is up
- * to the program to supply one. A good guess is
- * extern int sockatmark(int);
- */
-/*#define HAS_SOCKATMARK_PROTO / **/
+#define HAS_QUAD /**/
+#ifdef HAS_QUAD
+# define Quad_t long long /**/
+# define Uquad_t unsigned long long /**/
+# define QUADKIND 3 /**/
+# define QUAD_IS_INT 1
+# define QUAD_IS_LONG 2
+# define QUAD_IS_LONG_LONG 3
+# define QUAD_IS_INT64_T 4
+#endif
-/* HAS_SOCKS5_INIT:
- * This symbol, if defined, indicates that the socks5_init routine is
- * available to initialize SOCKS 5.
+/* Drand01:
+ * This macro is to be used to generate uniformly distributed
+ * random numbers over the range [0., 1.[. You may have to supply
+ * an 'extern double drand48();' in your program since SunOS 4.1.3
+ * doesn't provide you with anything relevant in its headers.
+ * See HAS_DRAND48_PROTO.
*/
-/*#define HAS_SOCKS5_INIT / **/
-
-/* HAS_SQRTL:
- * This symbol, if defined, indicates that the sqrtl routine is
- * available to do long double square roots.
+/* Rand_seed_t:
+ * This symbol defines the type of the argument of the
+ * random seed function.
*/
-#define HAS_SQRTL /**/
-
-/* HAS_SETRESGID_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the setresgid() function. Otherwise, it is up
- * to the program to supply one. Good guesses are
- * extern int setresgid(uid_t ruid, uid_t euid, uid_t suid);
+/* seedDrand01:
+ * This symbol defines the macro to be used in seeding the
+ * random number generator (see Drand01).
*/
-/*#define HAS_SETRESGID_PROTO / **/
-
-/* HAS_SETRESUID_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the setresuid() function. Otherwise, it is up
- * to the program to supply one. Good guesses are
- * extern int setresuid(uid_t ruid, uid_t euid, uid_t suid);
+/* RANDBITS:
+ * This symbol indicates how many bits are produced by the
+ * function used to generate normalized random numbers.
+ * Values include 15, 16, 31, and 48.
*/
-/*#define HAS_SETRESUID_PROTO / **/
+#define Drand01() drand48() /**/
+#define Rand_seed_t long /**/
+#define seedDrand01(x) srand48((Rand_seed_t)x) /**/
+#define RANDBITS 48 /**/
-/* HAS_STRUCT_STATFS_F_FLAGS:
- * This symbol, if defined, indicates that the struct statfs
- * does have the f_flags member containing the mount flags of
- * the filesystem containing the file.
- * This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3),
- * not from <sys/statfs.h> (SYSV). Older BSDs (like Ultrix) do not
- * have statfs() and struct statfs, they have ustat() and getmnt()
- * with struct ustat and struct fs_data.
+/* SELECT_MIN_BITS:
+ * This symbol holds the minimum number of bits operated by select.
+ * That is, if you do select(n, ...), how many bits at least will be
+ * cleared in the masks if some activity is detected. Usually this
+ * is either n or 32*ceil(n/32), especially many little-endians do
+ * the latter. This is only useful if you have select(), naturally.
*/
-/*#define HAS_STRUCT_STATFS_F_FLAGS / **/
+#define SELECT_MIN_BITS 32 /**/
-/* HAS_STRUCT_STATFS:
- * This symbol, if defined, indicates that the struct statfs
- * to do statfs() is supported.
+/* Select_fd_set_t:
+ * This symbol holds the type used for the 2nd, 3rd, and 4th
+ * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
+ * is defined, and 'int *' otherwise. This is only useful if you
+ * have select(), of course.
*/
-#define HAS_STRUCT_STATFS /**/
+#define Select_fd_set_t fd_set * /**/
-/* HAS_FSTATVFS:
- * This symbol, if defined, indicates that the fstatvfs routine is
- * available to stat filesystems by file descriptors.
+/* SIG_NAME:
+ * This symbol contains a list of signal names in order of
+ * signal number. This is intended
+ * to be used as a static array initialization, like this:
+ * char *sig_name[] = { SIG_NAME };
+ * The signals in the list are separated with commas, and each signal
+ * is surrounded by double quotes. There is no leading SIG in the signal
+ * name, i.e. SIGQUIT is known as "QUIT".
+ * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
+ * etc., where nn is the actual signal number (e.g. NUM37).
+ * The signal number for sig_name[i] is stored in sig_num[i].
+ * The last element is 0 to terminate the list with a NULL. This
+ * corresponds to the 0 at the end of the sig_name_init list.
+ * Note that this variable is initialized from the sig_name_init,
+ * not from sig_name (which is unused).
*/
-#define HAS_FSTATVFS /**/
-
-/* HAS_STRFTIME:
- * This symbol, if defined, indicates that the strftime routine is
- * available to do time formatting.
+/* SIG_NUM:
+ * This symbol contains a list of signal numbers, in the same order as the
+ * SIG_NAME list. It is suitable for static array initialization, as in:
+ * int sig_num[] = { SIG_NUM };
+ * The signals in the list are separated with commas, and the indices
+ * within that list and the SIG_NAME list match, so it's easy to compute
+ * the signal name from a number or vice versa at the price of a small
+ * dynamic linear lookup.
+ * Duplicates are allowed, but are moved to the end of the list.
+ * The signal number corresponding to sig_name[i] is sig_number[i].
+ * if (i < NSIG) then sig_number[i] == i.
+ * The last element is 0, corresponding to the 0 at the end of
+ * the sig_name_init list.
+ * Note that this variable is initialized from the sig_num_init,
+ * not from sig_num (which is unused).
*/
-#define HAS_STRFTIME /**/
-
-/* HAS_STRLCAT
- * This symbol, if defined, indicates that the strlcat routine is
- * available to do string concatenation.
+/* SIG_SIZE:
+ * This variable contains the number of elements of the SIG_NAME
+ * and SIG_NUM arrays, excluding the final NULL entry.
*/
-/*#define HAS_STRLCAT /**/
+#define SIG_NAME "ZERO", "HUP", "INT", "QUIT", "ILL", "TRAP", "ABRT", "BUS", "FPE", "KILL", "USR1", "SEGV", "USR2", "PIPE", "ALRM", "TERM", "STKFLT", "CHLD", "CONT", "STOP", "TSTP", "TTIN", "TTOU", "URG", "XCPU", "XFSZ", "VTALRM", "PROF", "WINCH", "IO", "PWR", "SYS", "NUM32", "NUM33", "NUM34", "RTMIN", "NUM36", "NUM37", "NUM38", "NUM39", "NUM40", "NUM41", "NUM42", "NUM43", "NUM44", "NUM45", "NUM46", "NUM47", "NUM48", "NUM49", "NUM50", "NUM51", "NUM52", "NUM53", "NUM54", "NUM55", "NUM56", "NUM57", "NUM58", "NUM59", "NUM60", "NUM61", "NUM62", "NUM63", "RTMAX", "IOT", "CLD", "POLL", "UNUSED", 0 /**/
+#define SIG_NUM 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 6, 17, 29, 31, 0 /**/
+#define SIG_SIZE 69 /**/
-/* HAS_STRLCPY:
- * This symbol, if defined, indicates that the strlcpy routine is
- * available to do string copying.
+/* SITEARCH:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ * The standard distribution will put nothing in this directory.
+ * After perl has been installed, users may install their own local
+ * architecture-dependent modules in this directory with
+ * MakeMaker Makefile.PL
+ * or equivalent. See INSTALL for details.
*/
-/*#define HAS_STRLCPY /**/
-
-/* HAS_STRTOLD:
- * This symbol, if defined, indicates that the strtold routine is
- * available to convert strings to long doubles.
+/* SITEARCH_EXP:
+ * This symbol contains the ~name expanded version of SITEARCH, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define HAS_STRTOLD /**/
+#define SITEARCH "/opt/perl/lib/site_perl/5.9.2/i686-linux" /**/
+#define SITEARCH_EXP "/opt/perl/lib/site_perl/5.9.2/i686-linux" /**/
-/* HAS_STRTOLL:
- * This symbol, if defined, indicates that the strtoll routine is
- * available to convert strings to long longs.
+/* SITELIB:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ * The standard distribution will put nothing in this directory.
+ * After perl has been installed, users may install their own local
+ * architecture-independent modules in this directory with
+ * MakeMaker Makefile.PL
+ * or equivalent. See INSTALL for details.
*/
-#define HAS_STRTOLL /**/
+/* SITELIB_EXP:
+ * This symbol contains the ~name expanded version of SITELIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+/* SITELIB_STEM:
+ * This define is SITELIB_EXP with any trailing version-specific component
+ * removed. The elements in inc_version_list (inc_version_list.U) can
+ * be tacked onto this variable to generate a list of directories to search.
+ */
+#define SITELIB "/opt/perl/lib/site_perl/5.9.2" /**/
+#define SITELIB_EXP "/opt/perl/lib/site_perl/5.9.2" /**/
+#define SITELIB_STEM "/opt/perl/lib/site_perl" /**/
-/* HAS_STRTOQ:
- * This symbol, if defined, indicates that the strtoq routine is
- * available to convert strings to long longs (quads).
+/* Size_t_size:
+ * This symbol holds the size of a Size_t in bytes.
*/
-#define HAS_STRTOQ /**/
+#define Size_t_size 4 /* */
-/* HAS_STRTOULL:
- * This symbol, if defined, indicates that the strtoull routine is
- * available to convert strings to unsigned long longs.
+/* Size_t:
+ * This symbol holds the type used to declare length parameters
+ * for string functions. It is usually size_t, but may be
+ * unsigned long, int, etc. It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
*/
-#define HAS_STRTOULL /**/
+#define Size_t size_t /* length paramater for string functions */
-/* HAS_STRTOUQ:
- * This symbol, if defined, indicates that the strtouq routine is
- * available to convert strings to unsigned long longs (quads).
+/* Sock_size_t:
+ * This symbol holds the type used for the size argument of
+ * various socket calls (just the base type, not the pointer-to).
*/
-#define HAS_STRTOUQ /**/
+#define Sock_size_t socklen_t /**/
-/* HAS_SYSCALL_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the syscall() function. Otherwise, it is up
- * to the program to supply one. Good guesses are
- * extern int syscall(int, ...);
- * extern int syscall(long, ...);
+/* SSize_t:
+ * This symbol holds the type used by functions that return
+ * a count of bytes or an error condition. It must be a signed type.
+ * It is usually ssize_t, but may be long or int, etc.
+ * It may be necessary to include <sys/types.h> or <unistd.h>
+ * to get any typedef'ed information.
+ * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
*/
-#define HAS_SYSCALL_PROTO /**/
+#define SSize_t ssize_t /* signed count of bytes */
-/* HAS_TELLDIR_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the telldir() function. Otherwise, it is up
- * to the program to supply one. A good guess is
- * extern long telldir(DIR*);
+/* STARTPERL:
+ * This variable contains the string to put in front of a perl
+ * script to make sure (one hopes) that it runs with perl and not
+ * some shell.
*/
-#define HAS_TELLDIR_PROTO /**/
+#define STARTPERL "#!/opt/perl/bin/perl5.9.2" /**/
-/* U32_ALIGNMENT_REQUIRED:
- * This symbol, if defined, indicates that you must access
- * character data through U32-aligned pointers.
+/* STDCHAR:
+ * This symbol is defined to be the type of char used in stdio.h.
+ * It has the values "unsigned char" or "char".
*/
-#ifndef U32_ALIGNMENT_REQUIRED
-/*#define U32_ALIGNMENT_REQUIRED / **/
-#endif
+#define STDCHAR char /**/
-/* HAS_UALARM:
- * This symbol, if defined, indicates that the ualarm routine is
- * available to do alarms with microsecond granularity.
+/* HAS_STDIO_STREAM_ARRAY:
+ * This symbol, if defined, tells that there is an array
+ * holding the stdio streams.
*/
-#define HAS_UALARM /**/
+/* STDIO_STREAM_ARRAY:
+ * This symbol tells the name of the array holding the stdio streams.
+ * Usual values include _iob, __iob, and __sF.
+ */
+/*#define HAS_STDIO_STREAM_ARRAY / **/
+#define STDIO_STREAM_ARRAY
-/* HAS_UNORDERED:
- * This symbol, if defined, indicates that the unordered routine is
- * available to check whether two doubles are unordered
- * (effectively: whether either of them is NaN)
+/* Uid_t_f:
+ * This symbol defines the format string used for printing a Uid_t.
*/
-/*#define HAS_UNORDERED / **/
+#define Uid_t_f "lu" /**/
-/* HAS_USLEEP_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the usleep() function. Otherwise, it is up
- * to the program to supply one. A good guess is
- * extern int usleep(useconds_t);
- */
-#define HAS_USLEEP_PROTO /**/
-
-/* HAS_USTAT:
- * This symbol, if defined, indicates that the ustat system call is
- * available to query file system statistics by dev_t.
+/* Uid_t_sign:
+ * This symbol holds the signedess of a Uid_t.
+ * 1 for unsigned, -1 for signed.
*/
-#define HAS_USTAT /**/
+#define Uid_t_sign 1 /* UID sign */
-/* HAS_WRITEV:
- * This symbol, if defined, indicates that the writev routine is
- * available to do scatter writes.
+/* Uid_t_size:
+ * This symbol holds the size of a Uid_t in bytes.
*/
-#define HAS_WRITEV /**/
+#define Uid_t_size 4 /* UID size */
-/* USE_DYNAMIC_LOADING:
- * This symbol, if defined, indicates that dynamic loading of
- * some sort is available.
+/* Uid_t:
+ * This symbol holds the type used to declare user ids in the kernel.
+ * It can be int, ushort, uid_t, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
*/
-#define USE_DYNAMIC_LOADING /**/
+#define Uid_t uid_t /* UID type */
-/* FFLUSH_NULL:
- * This symbol, if defined, tells that fflush(NULL) does flush
- * all pending stdio output.
+/* USE_64_BIT_INT:
+ * This symbol, if defined, indicates that 64-bit integers should
+ * be used when available. If not defined, the native integers
+ * will be employed (be they 32 or 64 bits). The minimal possible
+ * 64-bitness is used, just enough to get 64-bit integers into Perl.
+ * This may mean using for example "long longs", while your memory
+ * may still be limited to 2 gigabytes.
*/
-/* FFLUSH_ALL:
- * This symbol, if defined, tells that to flush
- * all pending stdio output one must loop through all
- * the stdio file handles stored in an array and fflush them.
- * Note that if fflushNULL is defined, fflushall will not
- * even be probed for and will be left undefined.
+/* USE_64_BIT_ALL:
+ * This symbol, if defined, indicates that 64-bit integers should
+ * be used when available. If not defined, the native integers
+ * will be used (be they 32 or 64 bits). The maximal possible
+ * 64-bitness is employed: LP64 or ILP64, meaning that you will
+ * be able to use more than 2 gigabytes of memory. This mode is
+ * even more binary incompatible than USE_64_BIT_INT. You may not
+ * be able to run the resulting executable in a 32-bit CPU at all or
+ * you may need at least to reboot your OS to 64-bit mode.
*/
-#define FFLUSH_NULL /**/
-/*#define FFLUSH_ALL / **/
+#ifndef USE_64_BIT_INT
+/*#define USE_64_BIT_INT / **/
+#endif
-/* I_CRYPT:
- * This symbol, if defined, indicates that <crypt.h> exists and
- * should be included.
- */
-#define I_CRYPT /**/
+#ifndef USE_64_BIT_ALL
+/*#define USE_64_BIT_ALL / **/
+#endif
-/* DB_Prefix_t:
- * This symbol contains the type of the prefix structure element
- * in the <db.h> header file. In older versions of DB, it was
- * int, while in newer ones it is u_int32_t.
- */
-/* DB_Hash_t:
- * This symbol contains the type of the prefix structure element
- * in the <db.h> header file. In older versions of DB, it was
- * int, while in newer ones it is size_t.
- */
-/* DB_VERSION_MAJOR_CFG:
- * This symbol, if defined, defines the major version number of
- * Berkeley DB found in the <db.h> header when Perl was configured.
- */
-/* DB_VERSION_MINOR_CFG:
- * This symbol, if defined, defines the minor version number of
- * Berkeley DB found in the <db.h> header when Perl was configured.
- * For DB version 1 this is always 0.
- */
-/* DB_VERSION_PATCH_CFG:
- * This symbol, if defined, defines the patch version number of
- * Berkeley DB found in the <db.h> header when Perl was configured.
- * For DB version 1 this is always 0.
+/* USE_LARGE_FILES:
+ * This symbol, if defined, indicates that large file support
+ * should be used when available.
*/
-#define DB_Hash_t u_int32_t /**/
-#define DB_Prefix_t size_t /**/
-#define DB_VERSION_MAJOR_CFG /**/
-#define DB_VERSION_MINOR_CFG /**/
-#define DB_VERSION_PATCH_CFG /**/
+#ifndef USE_LARGE_FILES
+#define USE_LARGE_FILES /**/
+#endif
-/* I_FP:
- * This symbol, if defined, indicates that <fp.h> exists and
- * should be included.
+/* USE_LONG_DOUBLE:
+ * This symbol, if defined, indicates that long doubles should
+ * be used when available.
*/
-/*#define I_FP / **/
+#ifndef USE_LONG_DOUBLE
+/*#define USE_LONG_DOUBLE / **/
+#endif
-/* I_FP_CLASS:
- * This symbol, if defined, indicates that <fp_class.h> exists and
- * should be included.
+/* USE_MORE_BITS:
+ * This symbol, if defined, indicates that 64-bit interfaces and
+ * long doubles should be used when available.
*/
-/*#define I_FP_CLASS / **/
+#ifndef USE_MORE_BITS
+/*#define USE_MORE_BITS / **/
+#endif
-/* I_IEEEFP:
- * This symbol, if defined, indicates that <ieeefp.h> exists and
- * should be included.
+/* MULTIPLICITY:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use multiplicity.
*/
-/*#define I_IEEEFP / **/
+#ifndef MULTIPLICITY
+/*#define MULTIPLICITY / **/
+#endif
-/* I_INTTYPES:
- * This symbol, if defined, indicates to the C program that it should
- * include <inttypes.h>.
+/* USE_PERLIO:
+ * This symbol, if defined, indicates that the PerlIO abstraction should
+ * be used throughout. If not defined, stdio should be
+ * used in a fully backward compatible manner.
*/
-#define I_INTTYPES /**/
+#ifndef USE_PERLIO
+#define USE_PERLIO /**/
+#endif
-/* I_LANGINFO:
- * This symbol, if defined, indicates that <langinfo.h> exists and
- * should be included.
+/* USE_SOCKS:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use socks.
*/
-#define I_LANGINFO /**/
+#ifndef USE_SOCKS
+/*#define USE_SOCKS / **/
+#endif
-/* I_LIBUTIL:
- * This symbol, if defined, indicates that <libutil.h> exists and
- * should be included.
+/* USE_ITHREADS:
+ * This symbol, if defined, indicates that Perl should be built to
+ * use the interpreter-based threading implementation.
*/
-/*#define I_LIBUTIL / **/
-
-/* I_MNTENT:
- * This symbol, if defined, indicates that <mntent.h> exists and
- * should be included.
+/* USE_5005THREADS:
+ * This symbol, if defined, indicates that Perl should be built to
+ * use the 5.005-based threading implementation.
*/
-#define I_MNTENT /**/
-
-/* I_NETINET_TCP:
- * This symbol, if defined, indicates to the C program that it should
- * include <netinet/tcp.h>.
+/* OLD_PTHREADS_API:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use the old draft POSIX threads API.
*/
-#define I_NETINET_TCP /**/
-
-/* I_POLL:
- * This symbol, if defined, indicates that <poll.h> exists and
- * should be included.
+/* USE_REENTRANT_API:
+ * This symbol, if defined, indicates that Perl should
+ * try to use the various _r versions of library functions.
+ * This is extremely experimental.
*/
-#define I_POLL /**/
+/*#define USE_5005THREADS / **/
+/*#define USE_ITHREADS / **/
+#if defined(USE_5005THREADS) && !defined(USE_ITHREADS)
+#define USE_THREADS /* until src is revised*/
+#endif
+/*#define OLD_PTHREADS_API / **/
+/*#define USE_REENTRANT_API / **/
-/* I_PROT:
- * This symbol, if defined, indicates that <prot.h> exists and
- * should be included.
+/* PERL_VENDORARCH:
+ * If defined, this symbol contains the name of a private library.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world.
+ * It may have a ~ on the front.
+ * The standard distribution will put nothing in this directory.
+ * Vendors who distribute perl may wish to place their own
+ * architecture-dependent modules and extensions in this directory with
+ * MakeMaker Makefile.PL INSTALLDIRS=vendor
+ * or equivalent. See INSTALL for details.
*/
-/*#define I_PROT / **/
-
-/* I_SHADOW:
- * This symbol, if defined, indicates that <shadow.h> exists and
- * should be included.
+/* PERL_VENDORARCH_EXP:
+ * This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define I_SHADOW /**/
+/*#define PERL_VENDORARCH "" / **/
+/*#define PERL_VENDORARCH_EXP "" / **/
-/* I_SOCKS:
- * This symbol, if defined, indicates that <socks.h> exists and
- * should be included.
+/* PERL_VENDORLIB_EXP:
+ * This symbol contains the ~name expanded version of VENDORLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
*/
-/*#define I_SOCKS / **/
-
-/* I_SUNMATH:
- * This symbol, if defined, indicates that <sunmath.h> exists and
- * should be included.
+/* PERL_VENDORLIB_STEM:
+ * This define is PERL_VENDORLIB_EXP with any trailing version-specific component
+ * removed. The elements in inc_version_list (inc_version_list.U) can
+ * be tacked onto this variable to generate a list of directories to search.
*/
-/*#define I_SUNMATH / **/
+/*#define PERL_VENDORLIB_EXP "" / **/
+/*#define PERL_VENDORLIB_STEM "" / **/
-/* I_SYSLOG:
- * This symbol, if defined, indicates that <syslog.h> exists and
- * should be included.
+/* VOIDFLAGS:
+ * This symbol indicates how much support of the void type is given by this
+ * compiler. What various bits mean:
+ *
+ * 1 = supports declaration of void
+ * 2 = supports arrays of pointers to functions returning void
+ * 4 = supports comparisons between pointers to void functions and
+ * addresses of void functions
+ * 8 = suports declaration of generic void pointers
+ *
+ * The package designer should define VOIDUSED to indicate the requirements
+ * of the package. This can be done either by #defining VOIDUSED before
+ * including config.h, or by defining defvoidused in Myinit.U. If the
+ * latter approach is taken, only those flags will be tested. If the
+ * level of void support necessary is not present, defines void to int.
*/
-#define I_SYSLOG /**/
-
-/* I_SYSMODE:
- * This symbol, if defined, indicates that <sys/mode.h> exists and
- * should be included.
- */
-/*#define I_SYSMODE / **/
-
-/* I_SYS_MOUNT:
- * This symbol, if defined, indicates that <sys/mount.h> exists and
- * should be included.
- */
-#define I_SYS_MOUNT /**/
-
-/* I_SYS_STATFS:
- * This symbol, if defined, indicates that <sys/statfs.h> exists.
- */
-#define I_SYS_STATFS /**/
+#ifndef VOIDUSED
+#define VOIDUSED 15
+#endif
+#define VOIDFLAGS 15
+#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
+#define void int /* is void to be avoided? */
+#define M_VOID /* Xenix strikes again */
+#endif
-/* I_SYS_STATVFS:
- * This symbol, if defined, indicates that <sys/statvfs.h> exists and
- * should be included.
+/* HASATTRIBUTE:
+ * This symbol indicates the C compiler can check for function attributes,
+ * such as printf formats. This is normally only supported by GNU cc.
*/
-#define I_SYS_STATVFS /**/
+#define HASATTRIBUTE /**/
+#ifndef HASATTRIBUTE
+#ifdef __attribute__
+#undef __attribute__
+#endif
+#define __attribute__(_arg_)
+#endif
-/* I_SYSUTSNAME:
- * This symbol, if defined, indicates that <sys/utsname.h> exists and
- * should be included.
+/* HAS_CRYPT:
+ * This symbol, if defined, indicates that the crypt routine is available
+ * to encrypt passwords and the like.
*/
-#define I_SYSUTSNAME /**/
+#define HAS_CRYPT /**/
-/* I_SYS_VFS:
- * This symbol, if defined, indicates that <sys/vfs.h> exists and
- * should be included.
+/* SETUID_SCRIPTS_ARE_SECURE_NOW:
+ * This symbol, if defined, indicates that the bug that prevents
+ * setuid scripts from being secure is not present in this kernel.
*/
-#define I_SYS_VFS /**/
-
-/* I_USTAT:
- * This symbol, if defined, indicates that <ustat.h> exists and
- * should be included.
+/* DOSUID:
+ * This symbol, if defined, indicates that the C program should
+ * check the script that it is executing for setuid/setgid bits, and
+ * attempt to emulate setuid/setgid on systems that have disabled
+ * setuid #! scripts because the kernel can't do it securely.
+ * It is up to the package designer to make sure that this emulation
+ * is done securely. Among other things, it should do an fstat on
+ * the script it just opened to make sure it really is a setuid/setgid
+ * script, it should make sure the arguments passed correspond exactly
+ * to the argument on the #! line, and it should not trust any
+ * subprocesses to which it must pass the filename rather than the
+ * file descriptor of the script to be executed.
*/
-#define I_USTAT /**/
+/*#define SETUID_SCRIPTS_ARE_SECURE_NOW / **/
+/*#define DOSUID / **/
-/* PERL_PRIfldbl:
- * This symbol, if defined, contains the string used by stdio to
- * format long doubles (format 'f') for output.
- */
-/* PERL_PRIgldbl:
- * This symbol, if defined, contains the string used by stdio to
- * format long doubles (format 'g') for output.
- */
-/* PERL_PRIeldbl:
- * This symbol, if defined, contains the string used by stdio to
- * format long doubles (format 'e') for output.
- */
-/* PERL_SCNfldbl:
- * This symbol, if defined, contains the string used by stdio to
- * format long doubles (format 'f') for input.
+/* Shmat_t:
+ * This symbol holds the return type of the shmat() system call.
+ * Usually set to 'void *' or 'char *'.
*/
-#define PERL_PRIfldbl "Lf" /**/
-#define PERL_PRIgldbl "Lg" /**/
-#define PERL_PRIeldbl "Le" /**/
-#define PERL_SCNfldbl "Lf" /**/
-
-/* NEED_VA_COPY:
- * This symbol, if defined, indicates that the system stores
- * the variable argument list datatype, va_list, in a format
- * that cannot be copied by simple assignment, so that some
- * other means must be used when copying is required.
- * As such systems vary in their provision (or non-provision)
- * of copying mechanisms, handy.h defines a platform-
- * independent macro, Perl_va_copy(src, dst), to do the job.
+/* HAS_SHMAT_PROTOTYPE:
+ * This symbol, if defined, indicates that the sys/shm.h includes
+ * a prototype for shmat(). Otherwise, it is up to the program to
+ * guess one. Shmat_t shmat(int, Shmat_t, int) is a good guess,
+ * but not always right so it should be emitted by the program only
+ * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs.
*/
-/*#define NEED_VA_COPY / **/
+#define Shmat_t void * /**/
+#define HAS_SHMAT_PROTOTYPE /**/
-/* IVTYPE:
- * This symbol defines the C type used for Perl's IV.
- */
-/* UVTYPE:
- * This symbol defines the C type used for Perl's UV.
- */
-/* I8TYPE:
- * This symbol defines the C type used for Perl's I8.
- */
-/* U8TYPE:
- * This symbol defines the C type used for Perl's U8.
- */
-/* I16TYPE:
- * This symbol defines the C type used for Perl's I16.
- */
-/* U16TYPE:
- * This symbol defines the C type used for Perl's U16.
- */
-/* I32TYPE:
- * This symbol defines the C type used for Perl's I32.
- */
-/* U32TYPE:
- * This symbol defines the C type used for Perl's U32.
- */
-/* I64TYPE:
- * This symbol defines the C type used for Perl's I64.
- */
-/* U64TYPE:
- * This symbol defines the C type used for Perl's U64.
- */
-/* NVTYPE:
- * This symbol defines the C type used for Perl's NV.
- */
-/* IVSIZE:
- * This symbol contains the sizeof(IV).
- */
-/* UVSIZE:
- * This symbol contains the sizeof(UV).
- */
-/* I8SIZE:
- * This symbol contains the sizeof(I8).
- */
-/* U8SIZE:
- * This symbol contains the sizeof(U8).
- */
-/* I16SIZE:
- * This symbol contains the sizeof(I16).
- */
-/* U16SIZE:
- * This symbol contains the sizeof(U16).
- */
-/* I32SIZE:
- * This symbol contains the sizeof(I32).
- */
-/* U32SIZE:
- * This symbol contains the sizeof(U32).
- */
-/* I64SIZE:
- * This symbol contains the sizeof(I64).
- */
-/* U64SIZE:
- * This symbol contains the sizeof(U64).
- */
-/* NVSIZE:
- * This symbol contains the sizeof(NV).
- */
-/* NV_PRESERVES_UV:
- * This symbol, if defined, indicates that a variable of type NVTYPE
- * can preserve all the bits of a variable of type UVTYPE.
- */
-/* NV_PRESERVES_UV_BITS:
- * This symbol contains the number of bits a variable of type NVTYPE
- * can preserve of a variable of type UVTYPE.
+/* I_NDBM:
+ * This symbol, if defined, indicates that <ndbm.h> exists and should
+ * be included.
*/
-#define IVTYPE long /**/
-#define UVTYPE unsigned long /**/
-#define I8TYPE char /**/
-#define U8TYPE unsigned char /**/
-#define I16TYPE short /**/
-#define U16TYPE unsigned short /**/
-#define I32TYPE long /**/
-#define U32TYPE unsigned long /**/
-#ifdef HAS_QUAD
-#define I64TYPE long long /**/
-#define U64TYPE unsigned long long /**/
-#endif
-#define NVTYPE double /**/
-#define IVSIZE 4 /**/
-#define UVSIZE 4 /**/
-#define I8SIZE 1 /**/
-#define U8SIZE 1 /**/
-#define I16SIZE 2 /**/
-#define U16SIZE 2 /**/
-#define I32SIZE 4 /**/
-#define U32SIZE 4 /**/
-#ifdef HAS_QUAD
-#define I64SIZE 8 /**/
-#define U64SIZE 8 /**/
-#endif
-#define NVSIZE 8 /**/
-#define NV_PRESERVES_UV
-#define NV_PRESERVES_UV_BITS 32
-#if UVSIZE == 8
-# ifdef BYTEORDER
-# if BYTEORDER == 0x1234
-# undef BYTEORDER
-# define BYTEORDER 0x12345678
-# else
-# if BYTEORDER == 0x4321
-# undef BYTEORDER
-# define BYTEORDER 0x87654321
-# endif
-# endif
-# endif
-#endif
+/*#define I_NDBM / **/
-/* IVdf:
- * This symbol defines the format string used for printing a Perl IV
- * as a signed decimal integer.
- */
-/* UVuf:
- * This symbol defines the format string used for printing a Perl UV
- * as an unsigned decimal integer.
- */
-/* UVof:
- * This symbol defines the format string used for printing a Perl UV
- * as an unsigned octal integer.
- */
-/* UVxf:
- * This symbol defines the format string used for printing a Perl UV
- * as an unsigned hexadecimal integer in lowercase abcdef.
- */
-/* UVXf:
- * This symbol defines the format string used for printing a Perl UV
- * as an unsigned hexadecimal integer in uppercase ABCDEF.
- */
-/* NVef:
- * This symbol defines the format string used for printing a Perl NV
- * using %e-ish floating point format.
- */
-/* NVff:
- * This symbol defines the format string used for printing a Perl NV
- * using %f-ish floating point format.
+/* I_STDARG:
+ * This symbol, if defined, indicates that <stdarg.h> exists and should
+ * be included.
*/
-/* NVgf:
- * This symbol defines the format string used for printing a Perl NV
- * using %g-ish floating point format.
+/* I_VARARGS:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <varargs.h>.
*/
-#define IVdf "ld" /**/
-#define UVuf "lu" /**/
-#define UVof "lo" /**/
-#define UVxf "lx" /**/
-#define UVXf "lX" /**/
-#define NVef "e" /**/
-#define NVff "f" /**/
-#define NVgf "g" /**/
+#define I_STDARG /**/
+/*#define I_VARARGS / **/
-/* SELECT_MIN_BITS:
- * This symbol holds the minimum number of bits operated by select.
- * That is, if you do select(n, ...), how many bits at least will be
- * cleared in the masks if some activity is detected. Usually this
- * is either n or 32*ceil(n/32), especially many little-endians do
- * the latter. This is only useful if you have select(), naturally.
+/* CAN_PROTOTYPE:
+ * If defined, this macro indicates that the C compiler can handle
+ * function prototypes.
*/
-#define SELECT_MIN_BITS 32 /**/
-
-/* STARTPERL:
- * This variable contains the string to put in front of a perl
- * script to make sure (one hopes) that it runs with perl and not
- * some shell.
+/* _:
+ * This macro is used to declare function parameters for folks who want
+ * to make declarations with prototypes using a different style than
+ * the above macros. Use double parentheses. For example:
+ *
+ * int main _((int argc, char *argv[]));
*/
-#define STARTPERL "#!/opt/perl/bin/perl5.9.2" /**/
+#define CAN_PROTOTYPE /**/
+#ifdef CAN_PROTOTYPE
+#define _(args) args
+#else
+#define _(args) ()
+#endif
-/* HAS_STDIO_STREAM_ARRAY:
- * This symbol, if defined, tells that there is an array
- * holding the stdio streams.
- */
-/* STDIO_STREAM_ARRAY:
- * This symbol tells the name of the array holding the stdio streams.
- * Usual values include _iob, __iob, and __sF.
+/* SH_PATH:
+ * This symbol contains the full pathname to the shell used on this
+ * on this system to execute Bourne shell scripts. Usually, this will be
+ * /bin/sh, though it's possible that some systems will have /bin/ksh,
+ * /bin/pdksh, /bin/ash, /bin/bash, or even something such as
+ * D:/bin/sh.exe.
*/
-/*#define HAS_STDIO_STREAM_ARRAY / **/
-#define STDIO_STREAM_ARRAY
+#define SH_PATH "/bin/sh" /**/
-/* USE_64_BIT_INT:
- * This symbol, if defined, indicates that 64-bit integers should
- * be used when available. If not defined, the native integers
- * will be employed (be they 32 or 64 bits). The minimal possible
- * 64-bitness is used, just enough to get 64-bit integers into Perl.
- * This may mean using for example "long longs", while your memory
- * may still be limited to 2 gigabytes.
+/* USE_CROSS_COMPILE:
+ * This symbol, if defined, indicates that Perl is being cross-compiled.
*/
-/* USE_64_BIT_ALL:
- * This symbol, if defined, indicates that 64-bit integers should
- * be used when available. If not defined, the native integers
- * will be used (be they 32 or 64 bits). The maximal possible
- * 64-bitness is employed: LP64 or ILP64, meaning that you will
- * be able to use more than 2 gigabytes of memory. This mode is
- * even more binary incompatible than USE_64_BIT_INT. You may not
- * be able to run the resulting executable in a 32-bit CPU at all or
- * you may need at least to reboot your OS to 64-bit mode.
+/* PERL_TARGETARCH:
+ * This symbol, if defined, indicates the target architecture
+ * Perl has been cross-compiled to. Undefined if not a cross-compile.
*/
-#ifndef USE_64_BIT_INT
-/*#define USE_64_BIT_INT / **/
+#ifndef USE_CROSS_COMPILE
+/*#define USE_CROSS_COMPILE / **/
+#define PERL_TARGETARCH "" /**/
#endif
-#ifndef USE_64_BIT_ALL
-/*#define USE_64_BIT_ALL / **/
-#endif
+/* HAS_AINTL:
+ * This symbol, if defined, indicates that the aintl routine is
+ * available. If copysignl is also present we can emulate modfl.
+ */
+/*#define HAS_AINTL / **/
+
+/* HAS_COPYSIGNL:
+ * This symbol, if defined, indicates that the copysignl routine is
+ * available. If aintl is also present we can emulate modfl.
+ */
+#define HAS_COPYSIGNL /**/
-/* USE_FAST_STDIO:
- * This symbol, if defined, indicates that Perl should
- * be built to use 'fast stdio'.
- * Defaults to define in Perls 5.8 and earlier, to undef later.
+/* HAS_DBMINIT_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the dbminit() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern int dbminit(char *);
*/
-#ifndef USE_FAST_STDIO
-/*#define USE_FAST_STDIO / **/
-#endif
+/*#define HAS_DBMINIT_PROTO / **/
-/* USE_LARGE_FILES:
- * This symbol, if defined, indicates that large file support
- * should be used when available.
+/* HAS_DIRFD:
+ * This manifest constant lets the C program know that dirfd
+ * is available.
*/
-#ifndef USE_LARGE_FILES
-#define USE_LARGE_FILES /**/
-#endif
+#define HAS_DIRFD /**/
-/* USE_LONG_DOUBLE:
- * This symbol, if defined, indicates that long doubles should
- * be used when available.
+/* HAS_FAST_STDIO:
+ * This symbol, if defined, indicates that the "fast stdio"
+ * is available to manipulate the stdio buffers directly.
*/
-#ifndef USE_LONG_DOUBLE
-/*#define USE_LONG_DOUBLE / **/
-#endif
+/*#define HAS_FAST_STDIO / **/
-/* USE_MORE_BITS:
- * This symbol, if defined, indicates that 64-bit interfaces and
- * long doubles should be used when available.
+/* HAS_FLOCK_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the flock() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern int flock(int, int);
*/
-#ifndef USE_MORE_BITS
-/*#define USE_MORE_BITS / **/
-#endif
+#define HAS_FLOCK_PROTO /**/
-/* MULTIPLICITY:
- * This symbol, if defined, indicates that Perl should
- * be built to use multiplicity.
+/* HAS_FPCLASSL:
+ * This symbol, if defined, indicates that the fpclassl routine is
+ * available to classify long doubles. Available for example in IRIX.
+ * The returned values are defined in <ieeefp.h> and are:
+ *
+ * FP_SNAN signaling NaN
+ * FP_QNAN quiet NaN
+ * FP_NINF negative infinity
+ * FP_PINF positive infinity
+ * FP_NDENORM negative denormalized non-zero
+ * FP_PDENORM positive denormalized non-zero
+ * FP_NZERO negative zero
+ * FP_PZERO positive zero
+ * FP_NNORM negative normalized non-zero
+ * FP_PNORM positive normalized non-zero
*/
-#ifndef MULTIPLICITY
-/*#define MULTIPLICITY / **/
-#endif
+/*#define HAS_FPCLASSL / **/
-/* USE_PERLIO:
- * This symbol, if defined, indicates that the PerlIO abstraction should
- * be used throughout. If not defined, stdio should be
- * used in a fully backward compatible manner.
+/* HAS_ILOGBL:
+ * This symbol, if defined, indicates that the ilogbl routine is
+ * available. If scalbnl is also present we can emulate frexpl.
*/
-#ifndef USE_PERLIO
-#define USE_PERLIO /**/
-#endif
+#define HAS_ILOGBL /**/
-/* USE_SOCKS:
- * This symbol, if defined, indicates that Perl should
- * be built to use socks.
+/* HAS_NL_LANGINFO:
+ * This symbol, if defined, indicates that the nl_langinfo routine is
+ * available to return local data. You will also need <langinfo.h>
+ * and therefore I_LANGINFO.
*/
-#ifndef USE_SOCKS
-/*#define USE_SOCKS / **/
-#endif
+#define HAS_NL_LANGINFO /**/
-/* HAS_DRAND48_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the drand48() function. Otherwise, it is up
- * to the program to supply one. A good guess is
- * extern double drand48(void);
+/* HAS_PROCSELFEXE:
+ * This symbol is defined if PROCSELFEXE_PATH is a symlink
+ * to the absolute pathname of the executing program.
*/
-#define HAS_DRAND48_PROTO /**/
+/* PROCSELFEXE_PATH:
+ * If HAS_PROCSELFEXE is defined this symbol is the filename
+ * of the symbolic link pointing to the absolute pathname of
+ * the executing program.
+ */
+#define HAS_PROCSELFEXE /**/
+#if defined(HAS_PROCSELFEXE) && !defined(PROCSELFEXE_PATH)
+#define PROCSELFEXE_PATH "/proc/self/exe" /**/
+#endif
-/* HAS_GETHOST_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for gethostent(), gethostbyname(), and
- * gethostbyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+/* HAS_PTHREAD_ATTR_SETSCOPE:
+ * This symbol, if defined, indicates that the pthread_attr_setscope
+ * system call is available to set the contention scope attribute of
+ * a thread attribute object.
*/
-#define HAS_GETHOST_PROTOS /**/
+#define HAS_PTHREAD_ATTR_SETSCOPE /**/
-/* HAS_GETNET_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for getnetent(), getnetbyname(), and
- * getnetbyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+/* HAS_SCALBNL:
+ * This symbol, if defined, indicates that the scalbnl routine is
+ * available. If ilogbl is also present we can emulate frexpl.
*/
-#define HAS_GETNET_PROTOS /**/
+#define HAS_SCALBNL /**/
-/* HAS_GETPROTO_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for getprotoent(), getprotobyname(), and
- * getprotobyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+/* HAS_SIGPROCMASK:
+ * This symbol, if defined, indicates that the sigprocmask
+ * system call is available to examine or change the signal mask
+ * of the calling process.
*/
-#define HAS_GETPROTO_PROTOS /**/
+#define HAS_SIGPROCMASK /**/
-/* HAS_GETSERV_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for getservent(), getservbyname(), and
- * getservbyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+/* HAS_SOCKATMARK:
+ * This symbol, if defined, indicates that the sockatmark routine is
+ * available to test whether a socket is at the out-of-band mark.
*/
-#define HAS_GETSERV_PROTOS /**/
+#define HAS_SOCKATMARK /**/
-/* HAS_LSEEK_PROTO:
+/* HAS_SOCKATMARK_PROTO:
* This symbol, if defined, indicates that the system provides
- * a prototype for the lseek() function. Otherwise, it is up
+ * a prototype for the sockatmark() function. Otherwise, it is up
* to the program to supply one. A good guess is
- * extern off_t lseek(int, off_t, int);
+ * extern int sockatmark(int);
*/
-#define HAS_LSEEK_PROTO /**/
+/*#define HAS_SOCKATMARK_PROTO / **/
-/* Netdb_host_t:
- * This symbol holds the type used for the 1st argument
- * to gethostbyaddr().
- */
-/* Netdb_hlen_t:
- * This symbol holds the type used for the 2nd argument
- * to gethostbyaddr().
- */
-/* Netdb_name_t:
- * This symbol holds the type used for the argument to
- * gethostbyname().
+/* HAS_SETRESGID_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the setresgid() function. Otherwise, it is up
+ * to the program to supply one. Good guesses are
+ * extern int setresgid(uid_t ruid, uid_t euid, uid_t suid);
*/
-/* Netdb_net_t:
- * This symbol holds the type used for the 1st argument to
- * getnetbyaddr().
+/*#define HAS_SETRESGID_PROTO / **/
+
+/* HAS_SETRESUID_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the setresuid() function. Otherwise, it is up
+ * to the program to supply one. Good guesses are
+ * extern int setresuid(uid_t ruid, uid_t euid, uid_t suid);
*/
-#define Netdb_host_t const void * /**/
-#define Netdb_hlen_t size_t /**/
-#define Netdb_name_t const char * /**/
-#define Netdb_net_t in_addr_t /**/
+/*#define HAS_SETRESUID_PROTO / **/
-/* Select_fd_set_t:
- * This symbol holds the type used for the 2nd, 3rd, and 4th
- * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
- * is defined, and 'int *' otherwise. This is only useful if you
- * have select(), of course.
+/* HAS_STRFTIME:
+ * This symbol, if defined, indicates that the strftime routine is
+ * available to do time formatting.
*/
-#define Select_fd_set_t fd_set * /**/
+#define HAS_STRFTIME /**/
-/* Sock_size_t:
- * This symbol holds the type used for the size argument of
- * various socket calls (just the base type, not the pointer-to).
+/* HAS_SYSCALL_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the syscall() function. Otherwise, it is up
+ * to the program to supply one. Good guesses are
+ * extern int syscall(int, ...);
+ * extern int syscall(long, ...);
*/
-#define Sock_size_t socklen_t /**/
+#define HAS_SYSCALL_PROTO /**/
-/* ARCHNAME:
- * This symbol holds a string representing the architecture name.
- * It may be used to construct an architecture-dependant pathname
- * where library files may be held under a private library, for
- * instance.
+/* U32_ALIGNMENT_REQUIRED:
+ * This symbol, if defined, indicates that you must access
+ * character data through U32-aligned pointers.
*/
-#define ARCHNAME "i686-linux" /**/
+#ifndef U32_ALIGNMENT_REQUIRED
+/*#define U32_ALIGNMENT_REQUIRED / **/
+#endif
-/* HAS_ASCTIME_R:
- * This symbol, if defined, indicates that the asctime_r routine
- * is available to asctime re-entrantly.
+/* HAS_USLEEP_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the usleep() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern int usleep(useconds_t);
*/
-/* ASCTIME_R_PROTO:
- * This symbol encodes the prototype of asctime_r.
- * It is zero if d_asctime_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_asctime_r
- * is defined.
+#define HAS_USLEEP_PROTO /**/
+
+/* I_CRYPT:
+ * This symbol, if defined, indicates that <crypt.h> exists and
+ * should be included.
*/
-/*#define HAS_ASCTIME_R / **/
-#define ASCTIME_R_PROTO 0 /**/
+#define I_CRYPT /**/
+
+/* I_FP:
+ * This symbol, if defined, indicates that <fp.h> exists and
+ * should be included.
+ */
+/*#define I_FP / **/
-/* HAS_CRYPT_R:
- * This symbol, if defined, indicates that the crypt_r routine
- * is available to crypt re-entrantly.
+/* I_LANGINFO:
+ * This symbol, if defined, indicates that <langinfo.h> exists and
+ * should be included.
*/
-/* CRYPT_R_PROTO:
- * This symbol encodes the prototype of crypt_r.
- * It is zero if d_crypt_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_crypt_r
- * is defined.
+#define I_LANGINFO /**/
+
+/* USE_FAST_STDIO:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use 'fast stdio'.
+ * Defaults to define in Perls 5.8 and earlier, to undef later.
*/
-/*#define HAS_CRYPT_R / **/
-#define CRYPT_R_PROTO 0 /**/
+#ifndef USE_FAST_STDIO
+/*#define USE_FAST_STDIO / **/
+#endif
/* HAS_CTERMID_R:
* This symbol, if defined, indicates that the ctermid_r routine
/*#define HAS_CTERMID_R / **/
#define CTERMID_R_PROTO 0 /**/
-/* HAS_CTIME_R:
- * This symbol, if defined, indicates that the ctime_r routine
- * is available to ctime re-entrantly.
- */
-/* CTIME_R_PROTO:
- * This symbol encodes the prototype of ctime_r.
- * It is zero if d_ctime_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ctime_r
- * is defined.
- */
-/*#define HAS_CTIME_R / **/
-#define CTIME_R_PROTO 0 /**/
-
-/* HAS_DRAND48_R:
- * This symbol, if defined, indicates that the drand48_r routine
- * is available to drand48 re-entrantly.
- */
-/* DRAND48_R_PROTO:
- * This symbol encodes the prototype of drand48_r.
- * It is zero if d_drand48_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_drand48_r
- * is defined.
- */
-/*#define HAS_DRAND48_R / **/
-#define DRAND48_R_PROTO 0 /**/
-
-/* HAS_ENDGRENT_R:
- * This symbol, if defined, indicates that the endgrent_r routine
- * is available to endgrent re-entrantly.
- */
-/* ENDGRENT_R_PROTO:
- * This symbol encodes the prototype of endgrent_r.
- * It is zero if d_endgrent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endgrent_r
- * is defined.
- */
-/*#define HAS_ENDGRENT_R / **/
-#define ENDGRENT_R_PROTO 0 /**/
-
/* HAS_ENDHOSTENT_R:
* This symbol, if defined, indicates that the endhostent_r routine
* is available to endhostent re-entrantly.
/*#define HAS_ENDPROTOENT_R / **/
#define ENDPROTOENT_R_PROTO 0 /**/
-/* HAS_ENDPWENT_R:
- * This symbol, if defined, indicates that the endpwent_r routine
- * is available to endpwent re-entrantly.
- */
-/* ENDPWENT_R_PROTO:
- * This symbol encodes the prototype of endpwent_r.
- * It is zero if d_endpwent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endpwent_r
- * is defined.
- */
-/*#define HAS_ENDPWENT_R / **/
-#define ENDPWENT_R_PROTO 0 /**/
-
/* HAS_ENDSERVENT_R:
* This symbol, if defined, indicates that the endservent_r routine
* is available to endservent re-entrantly.
/*#define HAS_ENDSERVENT_R / **/
#define ENDSERVENT_R_PROTO 0 /**/
-/* HAS_GETGRENT_R:
- * This symbol, if defined, indicates that the getgrent_r routine
- * is available to getgrent re-entrantly.
- */
-/* GETGRENT_R_PROTO:
- * This symbol encodes the prototype of getgrent_r.
- * It is zero if d_getgrent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrent_r
- * is defined.
- */
-/*#define HAS_GETGRENT_R / **/
-#define GETGRENT_R_PROTO 0 /**/
-
-/* HAS_GETGRGID_R:
- * This symbol, if defined, indicates that the getgrgid_r routine
- * is available to getgrgid re-entrantly.
- */
-/* GETGRGID_R_PROTO:
- * This symbol encodes the prototype of getgrgid_r.
- * It is zero if d_getgrgid_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrgid_r
- * is defined.
- */
-/*#define HAS_GETGRGID_R / **/
-#define GETGRGID_R_PROTO 0 /**/
-
-/* HAS_GETGRNAM_R:
- * This symbol, if defined, indicates that the getgrnam_r routine
- * is available to getgrnam re-entrantly.
- */
-/* GETGRNAM_R_PROTO:
- * This symbol encodes the prototype of getgrnam_r.
- * It is zero if d_getgrnam_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrnam_r
- * is defined.
- */
-/*#define HAS_GETGRNAM_R / **/
-#define GETGRNAM_R_PROTO 0 /**/
-
/* HAS_GETHOSTBYADDR_R:
* This symbol, if defined, indicates that the gethostbyaddr_r routine
* is available to gethostbyaddr re-entrantly.
/*#define HAS_GETHOSTENT_R / **/
#define GETHOSTENT_R_PROTO 0 /**/
-/* HAS_GETLOGIN_R:
- * This symbol, if defined, indicates that the getlogin_r routine
- * is available to getlogin re-entrantly.
- */
-/* GETLOGIN_R_PROTO:
- * This symbol encodes the prototype of getlogin_r.
- * It is zero if d_getlogin_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getlogin_r
- * is defined.
- */
-/*#define HAS_GETLOGIN_R / **/
-#define GETLOGIN_R_PROTO 0 /**/
-
/* HAS_GETNETBYADDR_R:
* This symbol, if defined, indicates that the getnetbyaddr_r routine
* is available to getnetbyaddr re-entrantly.
/*#define HAS_GETPROTOENT_R / **/
#define GETPROTOENT_R_PROTO 0 /**/
-/* HAS_GETPWENT_R:
- * This symbol, if defined, indicates that the getpwent_r routine
- * is available to getpwent re-entrantly.
- */
-/* GETPWENT_R_PROTO:
- * This symbol encodes the prototype of getpwent_r.
- * It is zero if d_getpwent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwent_r
- * is defined.
- */
-/*#define HAS_GETPWENT_R / **/
-#define GETPWENT_R_PROTO 0 /**/
-
-/* HAS_GETPWNAM_R:
- * This symbol, if defined, indicates that the getpwnam_r routine
- * is available to getpwnam re-entrantly.
- */
-/* GETPWNAM_R_PROTO:
- * This symbol encodes the prototype of getpwnam_r.
- * It is zero if d_getpwnam_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwnam_r
- * is defined.
- */
-/*#define HAS_GETPWNAM_R / **/
-#define GETPWNAM_R_PROTO 0 /**/
-
-/* HAS_GETPWUID_R:
- * This symbol, if defined, indicates that the getpwuid_r routine
- * is available to getpwuid re-entrantly.
- */
-/* GETPWUID_R_PROTO:
- * This symbol encodes the prototype of getpwuid_r.
- * It is zero if d_getpwuid_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwuid_r
- * is defined.
- */
-/*#define HAS_GETPWUID_R / **/
-#define GETPWUID_R_PROTO 0 /**/
-
/* HAS_GETSERVBYNAME_R:
* This symbol, if defined, indicates that the getservbyname_r routine
* is available to getservbyname re-entrantly.
*/
/* GETSERVENT_R_PROTO:
* This symbol encodes the prototype of getservent_r.
- * It is zero if d_getservent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservent_r
- * is defined.
- */
-/*#define HAS_GETSERVENT_R / **/
-#define GETSERVENT_R_PROTO 0 /**/
-
-/* HAS_GETSPNAM_R:
- * This symbol, if defined, indicates that the getspnam_r routine
- * is available to getspnam re-entrantly.
- */
-/* GETSPNAM_R_PROTO:
- * This symbol encodes the prototype of getspnam_r.
- * It is zero if d_getspnam_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getspnam_r
- * is defined.
- */
-/*#define HAS_GETSPNAM_R / **/
-#define GETSPNAM_R_PROTO 0 /**/
-
-/* HAS_GMTIME_R:
- * This symbol, if defined, indicates that the gmtime_r routine
- * is available to gmtime re-entrantly.
- */
-/* GMTIME_R_PROTO:
- * This symbol encodes the prototype of gmtime_r.
- * It is zero if d_gmtime_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gmtime_r
- * is defined.
- */
-/*#define HAS_GMTIME_R / **/
-#define GMTIME_R_PROTO 0 /**/
-
-/* HAS_LOCALTIME_R:
- * This symbol, if defined, indicates that the localtime_r routine
- * is available to localtime re-entrantly.
- */
-/* LOCALTIME_R_PROTO:
- * This symbol encodes the prototype of localtime_r.
- * It is zero if d_localtime_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_localtime_r
- * is defined.
- */
-/*#define HAS_LOCALTIME_R / **/
-#define LOCALTIME_R_PROTO 0 /**/
-
-/* OLD_PTHREAD_CREATE_JOINABLE:
- * This symbol, if defined, indicates how to create pthread
- * in joinable (aka undetached) state. NOTE: not defined
- * if pthread.h already has defined PTHREAD_CREATE_JOINABLE
- * (the new version of the constant).
- * If defined, known values are PTHREAD_CREATE_UNDETACHED
- * and __UNDETACHED.
- */
-/*#define OLD_PTHREAD_CREATE_JOINABLE / **/
-
-/* HAS_PTHREAD_ATFORK:
- * This symbol, if defined, indicates that the pthread_atfork routine
- * is available to setup fork handlers.
- */
-/*#define HAS_PTHREAD_ATFORK / **/
-
-/* HAS_PTHREAD_YIELD:
- * This symbol, if defined, indicates that the pthread_yield
- * routine is available to yield the execution of the current
- * thread. sched_yield is preferable to pthread_yield.
- */
-/* SCHED_YIELD:
- * This symbol defines the way to yield the execution of
- * the current thread. Known ways are sched_yield,
- * pthread_yield, and pthread_yield with NULL.
- */
-/* HAS_SCHED_YIELD:
- * This symbol, if defined, indicates that the sched_yield
- * routine is available to yield the execution of the current
- * thread. sched_yield is preferable to pthread_yield.
- */
-/*#define HAS_PTHREAD_YIELD / **/
-#define SCHED_YIELD sched_yield() /**/
-#define HAS_SCHED_YIELD /**/
-
-/* HAS_RANDOM_R:
- * This symbol, if defined, indicates that the random_r routine
- * is available to random re-entrantly.
- */
-/* RANDOM_R_PROTO:
- * This symbol encodes the prototype of random_r.
- * It is zero if d_random_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_random_r
+ * It is zero if d_getservent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservent_r
* is defined.
*/
-/*#define HAS_RANDOM_R / **/
-#define RANDOM_R_PROTO 0 /**/
+/*#define HAS_GETSERVENT_R / **/
+#define GETSERVENT_R_PROTO 0 /**/
+
+/* HAS_PTHREAD_ATFORK:
+ * This symbol, if defined, indicates that the pthread_atfork routine
+ * is available to setup fork handlers.
+ */
+/*#define HAS_PTHREAD_ATFORK / **/
/* HAS_READDIR64_R:
* This symbol, if defined, indicates that the readdir64_r routine
/*#define HAS_READDIR64_R / **/
#define READDIR64_R_PROTO 0 /**/
-/* HAS_READDIR_R:
- * This symbol, if defined, indicates that the readdir_r routine
- * is available to readdir re-entrantly.
- */
-/* READDIR_R_PROTO:
- * This symbol encodes the prototype of readdir_r.
- * It is zero if d_readdir_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_readdir_r
- * is defined.
- */
-/*#define HAS_READDIR_R / **/
-#define READDIR_R_PROTO 0 /**/
-
-/* HAS_SETGRENT_R:
- * This symbol, if defined, indicates that the setgrent_r routine
- * is available to setgrent re-entrantly.
- */
-/* SETGRENT_R_PROTO:
- * This symbol encodes the prototype of setgrent_r.
- * It is zero if d_setgrent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setgrent_r
- * is defined.
- */
-/*#define HAS_SETGRENT_R / **/
-#define SETGRENT_R_PROTO 0 /**/
-
/* HAS_SETHOSTENT_R:
* This symbol, if defined, indicates that the sethostent_r routine
* is available to sethostent re-entrantly.
/*#define HAS_SETPROTOENT_R / **/
#define SETPROTOENT_R_PROTO 0 /**/
-/* HAS_SETPWENT_R:
- * This symbol, if defined, indicates that the setpwent_r routine
- * is available to setpwent re-entrantly.
- */
-/* SETPWENT_R_PROTO:
- * This symbol encodes the prototype of setpwent_r.
- * It is zero if d_setpwent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setpwent_r
- * is defined.
- */
-/*#define HAS_SETPWENT_R / **/
-#define SETPWENT_R_PROTO 0 /**/
-
/* HAS_SETSERVENT_R:
* This symbol, if defined, indicates that the setservent_r routine
* is available to setservent re-entrantly.
/*#define HAS_SETSERVENT_R / **/
#define SETSERVENT_R_PROTO 0 /**/
-/* HAS_SRAND48_R:
- * This symbol, if defined, indicates that the srand48_r routine
- * is available to srand48 re-entrantly.
- */
-/* SRAND48_R_PROTO:
- * This symbol encodes the prototype of srand48_r.
- * It is zero if d_srand48_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_srand48_r
- * is defined.
- */
-/*#define HAS_SRAND48_R / **/
-#define SRAND48_R_PROTO 0 /**/
-
-/* HAS_SRANDOM_R:
- * This symbol, if defined, indicates that the srandom_r routine
- * is available to srandom re-entrantly.
- */
-/* SRANDOM_R_PROTO:
- * This symbol encodes the prototype of srandom_r.
- * It is zero if d_srandom_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_srandom_r
- * is defined.
- */
-/*#define HAS_SRANDOM_R / **/
-#define SRANDOM_R_PROTO 0 /**/
-
-/* HAS_STRERROR_R:
- * This symbol, if defined, indicates that the strerror_r routine
- * is available to strerror re-entrantly.
- */
-/* STRERROR_R_PROTO:
- * This symbol encodes the prototype of strerror_r.
- * It is zero if d_strerror_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_strerror_r
- * is defined.
- */
-/*#define HAS_STRERROR_R / **/
-#define STRERROR_R_PROTO 0 /**/
-
-/* HAS_TMPNAM_R:
- * This symbol, if defined, indicates that the tmpnam_r routine
- * is available to tmpnam re-entrantly.
- */
-/* TMPNAM_R_PROTO:
- * This symbol encodes the prototype of tmpnam_r.
- * It is zero if d_tmpnam_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_tmpnam_r
- * is defined.
- */
-/*#define HAS_TMPNAM_R / **/
-#define TMPNAM_R_PROTO 0 /**/
-
/* HAS_TTYNAME_R:
* This symbol, if defined, indicates that the ttyname_r routine
* is available to ttyname re-entrantly.
/*#define HAS_TTYNAME_R / **/
#define TTYNAME_R_PROTO 0 /**/
-/* I_MACH_CTHREADS:
- * This symbol, if defined, indicates to the C program that it should
- * include <mach/cthreads.h>.
- */
-/*#define I_MACH_CTHREADS / **/
-
-/* I_PTHREAD:
- * This symbol, if defined, indicates to the C program that it should
- * include <pthread.h>.
- */
-#define I_PTHREAD /**/
-
-/* USE_ITHREADS:
- * This symbol, if defined, indicates that Perl should be built to
- * use the interpreter-based threading implementation.
- */
-/* USE_5005THREADS:
- * This symbol, if defined, indicates that Perl should be built to
- * use the 5.005-based threading implementation.
- */
-/* OLD_PTHREADS_API:
- * This symbol, if defined, indicates that Perl should
- * be built to use the old draft POSIX threads API.
- */
-/* USE_REENTRANT_API:
- * This symbol, if defined, indicates that Perl should
- * try to use the various _r versions of library functions.
- * This is extremely experimental.
- */
-/*#define USE_5005THREADS / **/
-/*#define USE_ITHREADS / **/
-#if defined(USE_5005THREADS) && !defined(USE_ITHREADS)
-#define USE_THREADS /* until src is revised*/
-#endif
-/*#define OLD_PTHREADS_API / **/
-/*#define USE_REENTRANT_API / **/
-
-/* HAS_TIME:
- * This symbol, if defined, indicates that the time() routine exists.
- */
-/* Time_t:
- * This symbol holds the type returned by time(). It can be long,
- * or time_t on BSD sites (in which case <sys/types.h> should be
- * included).
- */
-#define HAS_TIME /**/
-#define Time_t time_t /* Time type */
-
-/* HAS_TIMES:
- * This symbol, if defined, indicates that the times() routine exists.
- * Note that this became obsolete on some systems (SUNOS), which now
- * use getrusage(). It may be necessary to include <sys/times.h>.
- */
-#define HAS_TIMES /**/
-
-/* Fpos_t:
- * This symbol holds the type used to declare file positions in libc.
- * It can be fpos_t, long, uint, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
- */
-#define Fpos_t fpos_t /* File position type */
-
-/* Gid_t_f:
- * This symbol defines the format string used for printing a Gid_t.
- */
-#define Gid_t_f "lu" /**/
-
-/* Gid_t_sign:
- * This symbol holds the signedess of a Gid_t.
- * 1 for unsigned, -1 for signed.
- */
-#define Gid_t_sign 1 /* GID sign */
-
-/* Gid_t_size:
- * This symbol holds the size of a Gid_t in bytes.
- */
-#define Gid_t_size 4 /* GID size */
-
-/* Gid_t:
- * This symbol holds the return type of getgid() and the type of
- * argument to setrgid() and related functions. Typically,
- * it is the type of group ids in the kernel. It can be int, ushort,
- * gid_t, etc... It may be necessary to include <sys/types.h> to get
- * any typedef'ed information.
- */
-#define Gid_t gid_t /* Type for getgid(), etc... */
-
-/* Off_t:
- * This symbol holds the type used to declare offsets in the kernel.
- * It can be int, long, off_t, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
- */
-/* LSEEKSIZE:
- * This symbol holds the number of bytes used by the Off_t.
- */
-/* Off_t_size:
- * This symbol holds the number of bytes used by the Off_t.
- */
-#define Off_t off_t /* <offset> type */
-#define LSEEKSIZE 8 /* <offset> size */
-#define Off_t_size 8 /* <offset> size */
-
-/* Mode_t:
- * This symbol holds the type used to declare file modes
- * for systems calls. It is usually mode_t, but may be
- * int or unsigned short. It may be necessary to include <sys/types.h>
- * to get any typedef'ed information.
- */
-#define Mode_t mode_t /* file mode parameter for system calls */
-
-/* Pid_t:
- * This symbol holds the type used to declare process ids in the kernel.
- * It can be int, uint, pid_t, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
- */
-#define Pid_t pid_t /* PID type */
-
-/* Size_t_size:
- * This symbol holds the size of a Size_t in bytes.
- */
-#define Size_t_size 4 /* */
-
-/* Size_t:
- * This symbol holds the type used to declare length parameters
- * for string functions. It is usually size_t, but may be
- * unsigned long, int, etc. It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
- */
-#define Size_t size_t /* length paramater for string functions */
-
-/* Uid_t_f:
- * This symbol defines the format string used for printing a Uid_t.
- */
-#define Uid_t_f "lu" /**/
-
-/* Uid_t_sign:
- * This symbol holds the signedess of a Uid_t.
- * 1 for unsigned, -1 for signed.
- */
-#define Uid_t_sign 1 /* UID sign */
-
-/* Uid_t_size:
- * This symbol holds the size of a Uid_t in bytes.
- */
-#define Uid_t_size 4 /* UID size */
-
-/* Uid_t:
- * This symbol holds the type used to declare user ids in the kernel.
- * It can be int, ushort, uid_t, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
- */
-#define Uid_t uid_t /* UID type */
-
#endif
https://perl5.git.perl.org / perl5.git / commitdiff