+++ /dev/null
-
-/* ppport.h -- Perl/Pollution/Portability Version 2.011_01
- *
- * Automatically Created by Devel::PPPort on Thu Mar 18 11:06:48 2004
- *
- * Do NOT edit this file directly! -- Edit PPPort.pm instead.
- *
- * Version 2.x, Copyright (C) 2001, Paul Marquess.
- * Version 1.x, Copyright (C) 1999, Kenneth Albanowski.
- * This code may be used and distributed under the same license as any
- * version of Perl.
- *
- * This version of ppport.h is designed to support operation with Perl
- * installations back to 5.004, and has been tested up to 5.8.1.
- *
- * If this version of ppport.h is failing during the compilation of this
- * module, please check if a newer version of Devel::PPPort is available
- * on CPAN before sending a bug report.
- *
- * If you are using the latest version of Devel::PPPort and it is failing
- * during compilation of this module, please send a report to perlbug@perl.com
- *
- * Include all following information:
- *
- * 1. The complete output from running "perl -V"
- *
- * 2. This file.
- *
- * 3. The name & version of the module you were trying to build.
- *
- * 4. A full log of the build that failed.
- *
- * 5. Any other information that you think could be relevant.
- *
- *
- * For the latest version of this code, please retreive the Devel::PPPort
- * module from CPAN.
- *
- */
-
-/*
- * In order for a Perl extension module to be as portable as possible
- * across differing versions of Perl itself, certain steps need to be taken.
- * Including this header is the first major one, then using dTHR is all the
- * appropriate places and using a PL_ prefix to refer to global Perl
- * variables is the second.
- *
- */
-
-
-/* If you use one of a few functions that were not present in earlier
- * versions of Perl, please add a define before the inclusion of ppport.h
- * for a static include, or use the GLOBAL request in a single module to
- * produce a global definition that can be referenced from the other
- * modules.
- *
- * Function: Static define: Extern define:
- * newCONSTSUB() NEED_newCONSTSUB NEED_newCONSTSUB_GLOBAL
- *
- */
-
-
-/* To verify whether ppport.h is needed for your module, and whether any
- * special defines should be used, ppport.h can be run through Perl to check
- * your source code. Simply say:
- *
- * perl -x ppport.h *.c *.h *.xs foo/bar*.c [etc]
- *
- * The result will be a list of patches suggesting changes that should at
- * least be acceptable, if not necessarily the most efficient solution, or a
- * fix for all possible problems. It won't catch where dTHR is needed, and
- * doesn't attempt to account for global macro or function definitions,
- * nested includes, typemaps, etc.
- *
- * In order to test for the need of dTHR, please try your module under a
- * recent version of Perl that has threading compiled-in.
- *
- */
-
-
-/*
-#!/usr/bin/perl
-@ARGV = ("*.xs") if !@ARGV;
-%badmacros = %funcs = %macros = (); $replace = 0;
-foreach (<DATA>) {
- $funcs{$1} = 1 if /Provide:\s+(\S+)/;
- $macros{$1} = 1 if /^#\s*define\s+([a-zA-Z0-9_]+)/;
- $replace = $1 if /Replace:\s+(\d+)/;
- $badmacros{$2}=$1 if $replace and /^#\s*define\s+([a-zA-Z0-9_]+).*?\s+([a-zA-Z0-9_]+)/;
- $badmacros{$1}=$2 if /Replace (\S+) with (\S+)/;
-}
-foreach $filename (map(glob($_),@ARGV)) {
- unless (open(IN, "<$filename")) {
- warn "Unable to read from $file: $!\n";
- next;
- }
- print "Scanning $filename...\n";
- $c = ""; while (<IN>) { $c .= $_; } close(IN);
- $need_include = 0; %add_func = (); $changes = 0;
- $has_include = ($c =~ /#.*include.*ppport/m);
-
- foreach $func (keys %funcs) {
- if ($c =~ /#.*define.*\bNEED_$func(_GLOBAL)?\b/m) {
- if ($c !~ /\b$func\b/m) {
- print "If $func isn't needed, you don't need to request it.\n" if
- $changes += ($c =~ s/^.*#.*define.*\bNEED_$func\b.*\n//m);
- } else {
- print "Uses $func\n";
- $need_include = 1;
- }
- } else {
- if ($c =~ /\b$func\b/m) {
- $add_func{$func} =1 ;
- print "Uses $func\n";
- $need_include = 1;
- }
- }
- }
-
- if (not $need_include) {
- foreach $macro (keys %macros) {
- if ($c =~ /\b$macro\b/m) {
- print "Uses $macro\n";
- $need_include = 1;
- }
- }
- }
-
- foreach $badmacro (keys %badmacros) {
- if ($c =~ /\b$badmacro\b/m) {
- $changes += ($c =~ s/\b$badmacro\b/$badmacros{$badmacro}/gm);
- print "Uses $badmacros{$badmacro} (instead of $badmacro)\n";
- $need_include = 1;
- }
- }
-
- if (scalar(keys %add_func) or $need_include != $has_include) {
- if (!$has_include) {
- $inc = join('',map("#define NEED_$_\n", sort keys %add_func)).
- "#include \"ppport.h\"\n";
- $c = "$inc$c" unless $c =~ s/#.*include.*XSUB.*\n/$&$inc/m;
- } elsif (keys %add_func) {
- $inc = join('',map("#define NEED_$_\n", sort keys %add_func));
- $c = "$inc$c" unless $c =~ s/^.*#.*include.*ppport.*$/$inc$&/m;
- }
- if (!$need_include) {
- print "Doesn't seem to need ppport.h.\n";
- $c =~ s/^.*#.*include.*ppport.*\n//m;
- }
- $changes++;
- }
-
- if ($changes) {
- open(OUT,"ppport.h.$$");
- print OUT $c;
- close(OUT);
- open(DIFF, "diff -u $filename ppport.h.$$|");
- while (<DIFF>) { s!ppport\.h\.$$!$filename.patched!; print STDOUT; }
- close(DIFF);
- unlink("ppport.h.$$");
- } else {
- print "Looks OK\n";
- }
-}
-__DATA__
-*/
-
-#ifndef _P_P_PORTABILITY_H_
-#define _P_P_PORTABILITY_H_
-
-#ifndef PERL_REVISION
-# ifndef __PATCHLEVEL_H_INCLUDED__
-# define PERL_PATCHLEVEL_H_IMPLICIT
-# include <patchlevel.h>
-# endif
-# if !(defined(PERL_VERSION) || (defined(SUBVERSION) && defined(PATCHLEVEL)))
-# include <could_not_find_Perl_patchlevel.h>
-# endif
-# ifndef PERL_REVISION
-# define PERL_REVISION (5)
- /* Replace: 1 */
-# define PERL_VERSION PATCHLEVEL
-# define PERL_SUBVERSION SUBVERSION
- /* Replace PERL_PATCHLEVEL with PERL_VERSION */
- /* Replace: 0 */
-# endif
-#endif
-
-#define PERL_BCDVERSION ((PERL_REVISION * 0x1000000L) + (PERL_VERSION * 0x1000L) + PERL_SUBVERSION)
-
-/* It is very unlikely that anyone will try to use this with Perl 6
- (or greater), but who knows.
- */
-#if PERL_REVISION != 5
-# error ppport.h only works with Perl version 5
-#endif /* PERL_REVISION != 5 */
-
-#ifndef ERRSV
-# define ERRSV perl_get_sv("@",FALSE)
-#endif
-
-#if (PERL_VERSION < 4) || ((PERL_VERSION == 4) && (PERL_SUBVERSION <= 5))
-/* Replace: 1 */
-# define PL_Sv Sv
-# define PL_compiling compiling
-# define PL_copline copline
-# define PL_curcop curcop
-# define PL_curstash curstash
-# define PL_defgv defgv
-# define PL_dirty dirty
-# define PL_dowarn dowarn
-# define PL_hints hints
-# define PL_na na
-# define PL_perldb perldb
-# define PL_rsfp_filters rsfp_filters
-# define PL_rsfpv rsfp
-# define PL_stdingv stdingv
-# define PL_sv_no sv_no
-# define PL_sv_undef sv_undef
-# define PL_sv_yes sv_yes
-/* Replace: 0 */
-#endif
-
-#ifdef HASATTRIBUTE
-# if (defined(__GNUC__) && defined(__cplusplus)) || defined(__INTEL_COMPILER)
-# define PERL_UNUSED_DECL
-# else
-# define PERL_UNUSED_DECL __attribute__((unused))
-# endif
-#else
-# define PERL_UNUSED_DECL
-#endif
-
-#ifndef dNOOP
-# define NOOP (void)0
-# define dNOOP extern int Perl___notused PERL_UNUSED_DECL
-#endif
-
-#ifndef dTHR
-# define dTHR dNOOP
-#endif
-
-#ifndef dTHX
-# define dTHX dNOOP
-# define dTHXa(x) dNOOP
-# define dTHXoa(x) dNOOP
-#endif
-
-#ifndef pTHX
-# define pTHX void
-# define pTHX_
-# define aTHX
-# define aTHX_
-#endif
-
-#ifndef dAX
-# define dAX I32 ax = MARK - PL_stack_base + 1
-#endif
-#ifndef dITEMS
-# define dITEMS I32 items = SP - MARK
-#endif
-
-/* IV could also be a quad (say, a long long), but Perls
- * capable of those should have IVSIZE already. */
-#if !defined(IVSIZE) && defined(LONGSIZE)
-# define IVSIZE LONGSIZE
-#endif
-#ifndef IVSIZE
-# define IVSIZE 4 /* A bold guess, but the best we can make. */
-#endif
-
-#ifndef UVSIZE
-# define UVSIZE IVSIZE
-#endif
-
-#ifndef NVTYPE
-# if defined(USE_LONG_DOUBLE) && defined(HAS_LONG_DOUBLE)
-# define NVTYPE long double
-# else
-# define NVTYPE double
-# endif
-typedef NVTYPE NV;
-#endif
-
-#ifndef INT2PTR
-
-#if (IVSIZE == PTRSIZE) && (UVSIZE == PTRSIZE)
-# define PTRV UV
-# define INT2PTR(any,d) (any)(d)
-#else
-# if PTRSIZE == LONGSIZE
-# define PTRV unsigned long
-# else
-# define PTRV unsigned
-# endif
-# define INT2PTR(any,d) (any)(PTRV)(d)
-#endif
-#define NUM2PTR(any,d) (any)(PTRV)(d)
-#define PTR2IV(p) INT2PTR(IV,p)
-#define PTR2UV(p) INT2PTR(UV,p)
-#define PTR2NV(p) NUM2PTR(NV,p)
-#if PTRSIZE == LONGSIZE
-# define PTR2ul(p) (unsigned long)(p)
-#else
-# define PTR2ul(p) INT2PTR(unsigned long,p)
-#endif
-
-#endif /* !INT2PTR */
-
-#ifndef boolSV
-# define boolSV(b) ((b) ? &PL_sv_yes : &PL_sv_no)
-#endif
-
-#ifndef gv_stashpvn
-# define gv_stashpvn(str,len,flags) gv_stashpv(str,flags)
-#endif
-
-#ifndef newSVpvn
-# define newSVpvn(data,len) ((len) ? newSVpv ((data), (len)) : newSVpv ("", 0))
-#endif
-
-#ifndef newRV_inc
-/* Replace: 1 */
-# define newRV_inc(sv) newRV(sv)
-/* Replace: 0 */
-#endif
-
-/* DEFSV appears first in 5.004_56 */
-#ifndef DEFSV
-# define DEFSV GvSV(PL_defgv)
-#endif
-
-#ifndef SAVE_DEFSV
-# define SAVE_DEFSV SAVESPTR(GvSV(PL_defgv))
-#endif
-
-#ifndef newRV_noinc
-# ifdef __GNUC__
-# define newRV_noinc(sv) \
- ({ \
- SV *nsv = (SV*)newRV(sv); \
- SvREFCNT_dec(sv); \
- nsv; \
- })
-# else
-# if defined(USE_THREADS)
-static SV * newRV_noinc (SV * sv)
-{
- SV *nsv = (SV*)newRV(sv);
- SvREFCNT_dec(sv);
- return nsv;
-}
-# else
-# define newRV_noinc(sv) \
- (PL_Sv=(SV*)newRV(sv), SvREFCNT_dec(sv), (SV*)PL_Sv)
-# endif
-# endif
-#endif
-
-/* Provide: newCONSTSUB */
-
-/* newCONSTSUB from IO.xs is in the core starting with 5.004_63 */
-#if (PERL_VERSION < 4) || ((PERL_VERSION == 4) && (PERL_SUBVERSION < 63))
-
-#if defined(NEED_newCONSTSUB)
-static
-#else
-extern void newCONSTSUB(HV * stash, char * name, SV *sv);
-#endif
-
-#if defined(NEED_newCONSTSUB) || defined(NEED_newCONSTSUB_GLOBAL)
-void
-newCONSTSUB(stash,name,sv)
-HV *stash;
-char *name;
-SV *sv;
-{
- U32 oldhints = PL_hints;
- HV *old_cop_stash = PL_curcop->cop_stash;
- HV *old_curstash = PL_curstash;
- line_t oldline = PL_curcop->cop_line;
- PL_curcop->cop_line = PL_copline;
-
- PL_hints &= ~HINT_BLOCK_SCOPE;
- if (stash)
- PL_curstash = PL_curcop->cop_stash = stash;
-
- newSUB(
-
-#if (PERL_VERSION < 3) || ((PERL_VERSION == 3) && (PERL_SUBVERSION < 22))
- /* before 5.003_22 */
- start_subparse(),
-#else
-# if (PERL_VERSION == 3) && (PERL_SUBVERSION == 22)
- /* 5.003_22 */
- start_subparse(0),
-# else
- /* 5.003_23 onwards */
- start_subparse(FALSE, 0),
-# endif
-#endif
-
- newSVOP(OP_CONST, 0, newSVpv(name,0)),
- newSVOP(OP_CONST, 0, &PL_sv_no), /* SvPV(&PL_sv_no) == "" -- GMB */
- newSTATEOP(0, Nullch, newSVOP(OP_CONST, 0, sv))
- );
-
- PL_hints = oldhints;
- PL_curcop->cop_stash = old_cop_stash;
- PL_curstash = old_curstash;
- PL_curcop->cop_line = oldline;
-}
-#endif
-
-#endif /* newCONSTSUB */
-
-#ifndef START_MY_CXT
-
-/*
- * Boilerplate macros for initializing and accessing interpreter-local
- * data from C. All statics in extensions should be reworked to use
- * this, if you want to make the extension thread-safe. See ext/re/re.xs
- * for an example of the use of these macros.
- *
- * Code that uses these macros is responsible for the following:
- * 1. #define MY_CXT_KEY to a unique string, e.g. "DynaLoader_guts"
- * 2. Declare a typedef named my_cxt_t that is a structure that contains
- * all the data that needs to be interpreter-local.
- * 3. Use the START_MY_CXT macro after the declaration of my_cxt_t.
- * 4. Use the MY_CXT_INIT macro such that it is called exactly once
- * (typically put in the BOOT: section).
- * 5. Use the members of the my_cxt_t structure everywhere as
- * MY_CXT.member.
- * 6. Use the dMY_CXT macro (a declaration) in all the functions that
- * access MY_CXT.
- */
-
-#if defined(MULTIPLICITY) || defined(PERL_OBJECT) || \
- defined(PERL_CAPI) || defined(PERL_IMPLICIT_CONTEXT)
-
-/* This must appear in all extensions that define a my_cxt_t structure,
- * right after the definition (i.e. at file scope). The non-threads
- * case below uses it to declare the data as static. */
-#define START_MY_CXT
-
-#if (PERL_VERSION < 4 || (PERL_VERSION == 4 && PERL_SUBVERSION < 68 ))
-/* Fetches the SV that keeps the per-interpreter data. */
-#define dMY_CXT_SV \
- SV *my_cxt_sv = perl_get_sv(MY_CXT_KEY, FALSE)
-#else /* >= perl5.004_68 */
-#define dMY_CXT_SV \
- SV *my_cxt_sv = *hv_fetch(PL_modglobal, MY_CXT_KEY, \
- sizeof(MY_CXT_KEY)-1, TRUE)
-#endif /* < perl5.004_68 */
-
-/* This declaration should be used within all functions that use the
- * interpreter-local data. */
-#define dMY_CXT \
- dMY_CXT_SV; \
- my_cxt_t *my_cxtp = INT2PTR(my_cxt_t*,SvUV(my_cxt_sv))
-
-/* Creates and zeroes the per-interpreter data.
- * (We allocate my_cxtp in a Perl SV so that it will be released when
- * the interpreter goes away.) */
-#define MY_CXT_INIT \
- dMY_CXT_SV; \
- /* newSV() allocates one more than needed */ \
- my_cxt_t *my_cxtp = (my_cxt_t*)SvPVX(newSV(sizeof(my_cxt_t)-1));\
- Zero(my_cxtp, 1, my_cxt_t); \
- sv_setuv(my_cxt_sv, PTR2UV(my_cxtp))
-
-/* This macro must be used to access members of the my_cxt_t structure.
- * e.g. MYCXT.some_data */
-#define MY_CXT (*my_cxtp)
-
-/* Judicious use of these macros can reduce the number of times dMY_CXT
- * is used. Use is similar to pTHX, aTHX etc. */
-#define pMY_CXT my_cxt_t *my_cxtp
-#define pMY_CXT_ pMY_CXT,
-#define _pMY_CXT ,pMY_CXT
-#define aMY_CXT my_cxtp
-#define aMY_CXT_ aMY_CXT,
-#define _aMY_CXT ,aMY_CXT
-
-#else /* single interpreter */
-
-#define START_MY_CXT static my_cxt_t my_cxt;
-#define dMY_CXT_SV dNOOP
-#define dMY_CXT dNOOP
-#define MY_CXT_INIT NOOP
-#define MY_CXT my_cxt
-
-#define pMY_CXT void
-#define pMY_CXT_
-#define _pMY_CXT
-#define aMY_CXT
-#define aMY_CXT_
-#define _aMY_CXT
-
-#endif
-
-#endif /* START_MY_CXT */
-
-#ifndef IVdf
-# if IVSIZE == LONGSIZE
-# define IVdf "ld"
-# define UVuf "lu"
-# define UVof "lo"
-# define UVxf "lx"
-# define UVXf "lX"
-# else
-# if IVSIZE == INTSIZE
-# define IVdf "d"
-# define UVuf "u"
-# define UVof "o"
-# define UVxf "x"
-# define UVXf "X"
-# endif
-# endif
-#endif
-
-#ifndef NVef
-# if defined(USE_LONG_DOUBLE) && defined(HAS_LONG_DOUBLE) && \
- defined(PERL_PRIfldbl) /* Not very likely, but let's try anyway. */
-# define NVef PERL_PRIeldbl
-# define NVff PERL_PRIfldbl
-# define NVgf PERL_PRIgldbl
-# else
-# define NVef "e"
-# define NVff "f"
-# define NVgf "g"
-# endif
-#endif
-
-#ifndef AvFILLp /* Older perls (<=5.003) lack AvFILLp */
-# define AvFILLp AvFILL
-#endif
-
-#ifdef SvPVbyte
-# if PERL_REVISION == 5 && PERL_VERSION < 7
- /* SvPVbyte does not work in perl-5.6.1, borrowed version for 5.7.3 */
-# undef SvPVbyte
-# define SvPVbyte(sv, lp) \
- ((SvFLAGS(sv) & (SVf_POK|SVf_UTF8)) == (SVf_POK) \
- ? ((lp = SvCUR(sv)), SvPVX(sv)) : my_sv_2pvbyte(aTHX_ sv, &lp))
- static char *
- my_sv_2pvbyte(pTHX_ register SV *sv, STRLEN *lp)
- {
- sv_utf8_downgrade(sv,0);
- return SvPV(sv,*lp);
- }
-# endif
-#else
-# define SvPVbyte SvPV
-#endif
-
-#ifndef SvPV_nolen
-# define SvPV_nolen(sv) \
- ((SvFLAGS(sv) & (SVf_POK)) == SVf_POK \
- ? SvPVX(sv) : sv_2pv_nolen(sv))
- static char *
- sv_2pv_nolen(pTHX_ register SV *sv)
- {
- STRLEN n_a;
- return sv_2pv(sv, &n_a);
- }
-#endif
-
-#ifndef get_cv
-# define get_cv(name,create) perl_get_cv(name,create)
-#endif
-
-#ifndef get_sv
-# define get_sv(name,create) perl_get_sv(name,create)
-#endif
-
-#ifndef get_av
-# define get_av(name,create) perl_get_av(name,create)
-#endif
-
-#ifndef get_hv
-# define get_hv(name,create) perl_get_hv(name,create)
-#endif
-
-#ifndef call_argv
-# define call_argv perl_call_argv
-#endif
-
-#ifndef call_method
-# define call_method perl_call_method
-#endif
-
-#ifndef call_pv
-# define call_pv perl_call_pv
-#endif
-
-#ifndef call_sv
-# define call_sv perl_call_sv
-#endif
-
-#ifndef eval_pv
-# define eval_pv perl_eval_pv
-#endif
-
-#ifndef eval_sv
-# define eval_sv perl_eval_sv
-#endif
-
-#ifndef PERL_SCAN_GREATER_THAN_UV_MAX
-# define PERL_SCAN_GREATER_THAN_UV_MAX 0x02
-#endif
-
-#ifndef PERL_SCAN_SILENT_ILLDIGIT
-# define PERL_SCAN_SILENT_ILLDIGIT 0x04
-#endif
-
-#ifndef PERL_SCAN_ALLOW_UNDERSCORES
-# define PERL_SCAN_ALLOW_UNDERSCORES 0x01
-#endif
-
-#ifndef PERL_SCAN_DISALLOW_PREFIX
-# define PERL_SCAN_DISALLOW_PREFIX 0x02
-#endif
-
-#if (PERL_VERSION > 6) || ((PERL_VERSION == 6) && (PERL_SUBVERSION >= 1))
-#define I32_CAST
-#else
-#define I32_CAST (I32*)
-#endif
-
-#ifndef grok_hex
-static UV _grok_hex (pTHX_ char *string, STRLEN *len, I32 *flags, NV *result) {
- NV r = scan_hex(string, *len, I32_CAST len);
- if (r > UV_MAX) {
- *flags |= PERL_SCAN_GREATER_THAN_UV_MAX;
- if (result) *result = r;
- return UV_MAX;
- }
- return (UV)r;
-}
-
-# define grok_hex(string, len, flags, result) \
- _grok_hex(pTHX_ (string), (len), (flags), (result))
-#endif
-
-#ifndef grok_oct
-static UV _grok_oct (pTHX_ char *string, STRLEN *len, I32 *flags, NV *result) {
- NV r = scan_oct(string, *len, I32_CAST len);
- if (r > UV_MAX) {
- *flags |= PERL_SCAN_GREATER_THAN_UV_MAX;
- if (result) *result = r;
- return UV_MAX;
- }
- return (UV)r;
-}
-
-# define grok_oct(string, len, flags, result) \
- _grok_oct(pTHX_ (string), (len), (flags), (result))
-#endif
-
-#if !defined(grok_bin) && defined(scan_bin)
-static UV _grok_bin (pTHX_ char *string, STRLEN *len, I32 *flags, NV *result) {
- NV r = scan_bin(string, *len, I32_CAST len);
- if (r > UV_MAX) {
- *flags |= PERL_SCAN_GREATER_THAN_UV_MAX;
- if (result) *result = r;
- return UV_MAX;
- }
- return (UV)r;
-}
-
-# define grok_bin(string, len, flags, result) \
- _grok_bin(pTHX_ (string), (len), (flags), (result))
-#endif
-
-#ifndef IN_LOCALE
-# define IN_LOCALE \
- (PL_curcop == &PL_compiling ? IN_LOCALE_COMPILETIME : IN_LOCALE_RUNTIME)
-#endif
-
-#ifndef IN_LOCALE_RUNTIME
-# define IN_LOCALE_RUNTIME (PL_curcop->op_private & HINT_LOCALE)
-#endif
-
-#ifndef IN_LOCALE_COMPILETIME
-# define IN_LOCALE_COMPILETIME (PL_hints & HINT_LOCALE)
-#endif
-
-
-#ifndef IS_NUMBER_IN_UV
-# define IS_NUMBER_IN_UV 0x01
-# define IS_NUMBER_GREATER_THAN_UV_MAX 0x02
-# define IS_NUMBER_NOT_INT 0x04
-# define IS_NUMBER_NEG 0x08
-# define IS_NUMBER_INFINITY 0x10
-# define IS_NUMBER_NAN 0x20
-#endif
-
-#ifndef grok_numeric_radix
-# define GROK_NUMERIC_RADIX(sp, send) grok_numeric_radix(aTHX_ sp, send)
-
-#define grok_numeric_radix Perl_grok_numeric_radix
-
-static
-bool
-Perl_grok_numeric_radix(pTHX_ const char **sp, const char *send)
-{
-#ifdef USE_LOCALE_NUMERIC
-#if (PERL_VERSION > 6) || ((PERL_VERSION == 6) && (PERL_SUBVERSION >= 1))
- if (PL_numeric_radix_sv && IN_LOCALE) {
- STRLEN len;
- char* radix = SvPV(PL_numeric_radix_sv, len);
- if (*sp + len <= send && memEQ(*sp, radix, len)) {
- *sp += len;
- return TRUE;
- }
- }
-#else
- /* pre5.6.0 perls don't have PL_numeric_radix_sv so the radix
- * must manually be requested from locale.h */
-#include <locale.h>
- struct lconv *lc = localeconv();
- char *radix = lc->decimal_point;
- if (radix && IN_LOCALE) {
- STRLEN len = strlen(radix);
- if (*sp + len <= send && memEQ(*sp, radix, len)) {
- *sp += len;
- return TRUE;
- }
- }
-#endif /* PERL_VERSION */
-#endif /* USE_LOCALE_NUMERIC */
- /* always try "." if numeric radix didn't match because
- * we may have data from different locales mixed */
- if (*sp < send && **sp == '.') {
- ++*sp;
- return TRUE;
- }
- return FALSE;
-}
-#endif /* grok_numeric_radix */
-
-#ifndef grok_number
-
-#define grok_number Perl_grok_number
-
-static
-int
-Perl_grok_number(pTHX_ const char *pv, STRLEN len, UV *valuep)
-{
- const char *s = pv;
- const char *send = pv + len;
- const UV max_div_10 = UV_MAX / 10;
- const char max_mod_10 = UV_MAX % 10;
- int numtype = 0;
- int sawinf = 0;
- int sawnan = 0;
-
- while (s < send && isSPACE(*s))
- s++;
- if (s == send) {
- return 0;
- } else if (*s == '-') {
- s++;
- numtype = IS_NUMBER_NEG;
- }
- else if (*s == '+')
- s++;
-
- if (s == send)
- return 0;
-
- /* next must be digit or the radix separator or beginning of infinity */
- if (isDIGIT(*s)) {
- /* UVs are at least 32 bits, so the first 9 decimal digits cannot
- overflow. */
- UV value = *s - '0';
- /* This construction seems to be more optimiser friendly.
- (without it gcc does the isDIGIT test and the *s - '0' separately)
- With it gcc on arm is managing 6 instructions (6 cycles) per digit.
- In theory the optimiser could deduce how far to unroll the loop
- before checking for overflow. */
- if (++s < send) {
- int digit = *s - '0';
- if (digit >= 0 && digit <= 9) {
- value = value * 10 + digit;
- if (++s < send) {
- digit = *s - '0';
- if (digit >= 0 && digit <= 9) {
- value = value * 10 + digit;
- if (++s < send) {
- digit = *s - '0';
- if (digit >= 0 && digit <= 9) {
- value = value * 10 + digit;
- if (++s < send) {
- digit = *s - '0';
- if (digit >= 0 && digit <= 9) {
- value = value * 10 + digit;
- if (++s < send) {
- digit = *s - '0';
- if (digit >= 0 && digit <= 9) {
- value = value * 10 + digit;
- if (++s < send) {
- digit = *s - '0';
- if (digit >= 0 && digit <= 9) {
- value = value * 10 + digit;
- if (++s < send) {
- digit = *s - '0';
- if (digit >= 0 && digit <= 9) {
- value = value * 10 + digit;
- if (++s < send) {
- digit = *s - '0';
- if (digit >= 0 && digit <= 9) {
- value = value * 10 + digit;
- if (++s < send) {
- /* Now got 9 digits, so need to check
- each time for overflow. */
- digit = *s - '0';
- while (digit >= 0 && digit <= 9
- && (value < max_div_10
- || (value == max_div_10
- && digit <= max_mod_10))) {
- value = value * 10 + digit;
- if (++s < send)
- digit = *s - '0';
- else
- break;
- }
- if (digit >= 0 && digit <= 9
- && (s < send)) {
- /* value overflowed.
- skip the remaining digits, don't
- worry about setting *valuep. */
- do {
- s++;
- } while (s < send && isDIGIT(*s));
- numtype |=
- IS_NUMBER_GREATER_THAN_UV_MAX;
- goto skip_value;
- }
- }
- }
- }
- }
- }
- }
- }
- }
- }
- }
- }
- }
- }
- }
- }
- }
- }
- numtype |= IS_NUMBER_IN_UV;
- if (valuep)
- *valuep = value;
-
- skip_value:
- if (GROK_NUMERIC_RADIX(&s, send)) {
- numtype |= IS_NUMBER_NOT_INT;
- while (s < send && isDIGIT(*s)) /* optional digits after the radix */
- s++;
- }
- }
- else if (GROK_NUMERIC_RADIX(&s, send)) {
- numtype |= IS_NUMBER_NOT_INT | IS_NUMBER_IN_UV; /* valuep assigned below */
- /* no digits before the radix means we need digits after it */
- if (s < send && isDIGIT(*s)) {
- do {
- s++;
- } while (s < send && isDIGIT(*s));
- if (valuep) {
- /* integer approximation is valid - it's 0. */
- *valuep = 0;
- }
- }
- else
- return 0;
- } else if (*s == 'I' || *s == 'i') {
- s++; if (s == send || (*s != 'N' && *s != 'n')) return 0;
- s++; if (s == send || (*s != 'F' && *s != 'f')) return 0;
- s++; if (s < send && (*s == 'I' || *s == 'i')) {
- s++; if (s == send || (*s != 'N' && *s != 'n')) return 0;
- s++; if (s == send || (*s != 'I' && *s != 'i')) return 0;
- s++; if (s == send || (*s != 'T' && *s != 't')) return 0;
- s++; if (s == send || (*s != 'Y' && *s != 'y')) return 0;
- s++;
- }
- sawinf = 1;
- } else if (*s == 'N' || *s == 'n') {
- /* XXX TODO: There are signaling NaNs and quiet NaNs. */
- s++; if (s == send || (*s != 'A' && *s != 'a')) return 0;
- s++; if (s == send || (*s != 'N' && *s != 'n')) return 0;
- s++;
- sawnan = 1;
- } else
- return 0;
-
- if (sawinf) {
- numtype &= IS_NUMBER_NEG; /* Keep track of sign */
- numtype |= IS_NUMBER_INFINITY | IS_NUMBER_NOT_INT;
- } else if (sawnan) {
- numtype &= IS_NUMBER_NEG; /* Keep track of sign */
- numtype |= IS_NUMBER_NAN | IS_NUMBER_NOT_INT;
- } else if (s < send) {
- /* we can have an optional exponent part */
- if (*s == 'e' || *s == 'E') {
- /* The only flag we keep is sign. Blow away any "it's UV" */
- numtype &= IS_NUMBER_NEG;
- numtype |= IS_NUMBER_NOT_INT;
- s++;
- if (s < send && (*s == '-' || *s == '+'))
- s++;
- if (s < send && isDIGIT(*s)) {
- do {
- s++;
- } while (s < send && isDIGIT(*s));
- }
- else
- return 0;
- }
- }
- while (s < send && isSPACE(*s))
- s++;
- if (s >= send)
- return numtype;
- if (len == 10 && memEQ(pv, "0 but true", 10)) {
- if (valuep)
- *valuep = 0;
- return IS_NUMBER_IN_UV;
- }
- return 0;
-}
-#endif /* grok_number */
-
-#ifndef PERL_MAGIC_sv
-# define PERL_MAGIC_sv '\0'
-#endif
-
-#ifndef PERL_MAGIC_overload
-# define PERL_MAGIC_overload 'A'
-#endif
-
-#ifndef PERL_MAGIC_overload_elem
-# define PERL_MAGIC_overload_elem 'a'
-#endif
-
-#ifndef PERL_MAGIC_overload_table
-# define PERL_MAGIC_overload_table 'c'
-#endif
-
-#ifndef PERL_MAGIC_bm
-# define PERL_MAGIC_bm 'B'
-#endif
-
-#ifndef PERL_MAGIC_regdata
-# define PERL_MAGIC_regdata 'D'
-#endif
-
-#ifndef PERL_MAGIC_regdatum
-# define PERL_MAGIC_regdatum 'd'
-#endif
-
-#ifndef PERL_MAGIC_env
-# define PERL_MAGIC_env 'E'
-#endif
-
-#ifndef PERL_MAGIC_envelem
-# define PERL_MAGIC_envelem 'e'
-#endif
-
-#ifndef PERL_MAGIC_fm
-# define PERL_MAGIC_fm 'f'
-#endif
-
-#ifndef PERL_MAGIC_regex_global
-# define PERL_MAGIC_regex_global 'g'
-#endif
-
-#ifndef PERL_MAGIC_isa
-# define PERL_MAGIC_isa 'I'
-#endif
-
-#ifndef PERL_MAGIC_isaelem
-# define PERL_MAGIC_isaelem 'i'
-#endif
-
-#ifndef PERL_MAGIC_nkeys
-# define PERL_MAGIC_nkeys 'k'
-#endif
-
-#ifndef PERL_MAGIC_dbfile
-# define PERL_MAGIC_dbfile 'L'
-#endif
-
-#ifndef PERL_MAGIC_dbline
-# define PERL_MAGIC_dbline 'l'
-#endif
-
-#ifndef PERL_MAGIC_mutex
-# define PERL_MAGIC_mutex 'm'
-#endif
-
-#ifndef PERL_MAGIC_shared
-# define PERL_MAGIC_shared 'N'
-#endif
-
-#ifndef PERL_MAGIC_shared_scalar
-# define PERL_MAGIC_shared_scalar 'n'
-#endif
-
-#ifndef PERL_MAGIC_collxfrm
-# define PERL_MAGIC_collxfrm 'o'
-#endif
-
-#ifndef PERL_MAGIC_tied
-# define PERL_MAGIC_tied 'P'
-#endif
-
-#ifndef PERL_MAGIC_tiedelem
-# define PERL_MAGIC_tiedelem 'p'
-#endif
-
-#ifndef PERL_MAGIC_tiedscalar
-# define PERL_MAGIC_tiedscalar 'q'
-#endif
-
-#ifndef PERL_MAGIC_qr
-# define PERL_MAGIC_qr 'r'
-#endif
-
-#ifndef PERL_MAGIC_sig
-# define PERL_MAGIC_sig 'S'
-#endif
-
-#ifndef PERL_MAGIC_sigelem
-# define PERL_MAGIC_sigelem 's'
-#endif
-
-#ifndef PERL_MAGIC_taint
-# define PERL_MAGIC_taint 't'
-#endif
-
-#ifndef PERL_MAGIC_uvar
-# define PERL_MAGIC_uvar 'U'
-#endif
-
-#ifndef PERL_MAGIC_uvar_elem
-# define PERL_MAGIC_uvar_elem 'u'
-#endif
-
-#ifndef PERL_MAGIC_vstring
-# define PERL_MAGIC_vstring 'V'
-#endif
-
-#ifndef PERL_MAGIC_vec
-# define PERL_MAGIC_vec 'v'
-#endif
-
-#ifndef PERL_MAGIC_utf8
-# define PERL_MAGIC_utf8 'w'
-#endif
-
-#ifndef PERL_MAGIC_substr
-# define PERL_MAGIC_substr 'x'
-#endif
-
-#ifndef PERL_MAGIC_defelem
-# define PERL_MAGIC_defelem 'y'
-#endif
-
-#ifndef PERL_MAGIC_glob
-# define PERL_MAGIC_glob '*'
-#endif
-
-#ifndef PERL_MAGIC_arylen
-# define PERL_MAGIC_arylen '#'
-#endif
-
-#ifndef PERL_MAGIC_pos
-# define PERL_MAGIC_pos '.'
-#endif
-
-#ifndef PERL_MAGIC_backref
-# define PERL_MAGIC_backref '<'
-#endif
-
-#ifndef PERL_MAGIC_ext
-# define PERL_MAGIC_ext '~'
-#endif
-
-#endif /* _P_P_PORTABILITY_H_ */
-
-/* End of File ppport.h */
https://perl5.git.perl.org / perl5.git / commitdiff