/*
* Package name : perl5
* Source directory : .
- * Configuration time: Mon Sep 30 10:33:19 METDST 2002
- * Configured by : merijn
- * Target system : hp-ux l1 b.11.00 u 9000800 527706567 unlimited-user license
+ * Configuration time: Thu Mar 6 08:37:41 EET 2003
+ * Configured by : jhi
+ * Target system : osf1 kosh.hut.fi v4.0 1229 alpha
*/
#ifndef _config_h_
*/
#define HAS_ALARM /**/
-/* HASATTRIBUTE:
- * This symbol indicates the C compiler can check for function attributes,
- * such as printf formats. This is normally only supported by GNU cc.
- */
-/*#define HASATTRIBUTE / **/
-#ifndef HASATTRIBUTE
-#define __attribute__(_arg_)
-#endif
-
/* HAS_BCMP:
* This symbol is defined if the bcmp() routine is available to
* compare blocks of memory.
* This symbol, if defined, indicates that the flock routine is
* available to do file locking.
*/
-/*#define HAS_FLOCK / **/
+#define HAS_FLOCK /**/
/* HAS_FORK:
* This symbol, if defined, indicates that the fork routine is
* This symbol, if defined, indicates that the getpgrp2() (as in DG/UX)
* routine is available to get the current process group.
*/
-#define HAS_GETPGRP2 /**/
+/*#define HAS_GETPGRP2 / **/
/* HAS_GETPPID:
* This symbol, if defined, indicates that the getppid routine is
* This symbol, if defined, indicates that the setegid routine is available
* to change the effective gid of the current program.
*/
-/*#define HAS_SETEGID / **/
+#define HAS_SETEGID /**/
/* HAS_SETEUID:
* This symbol, if defined, indicates that the seteuid routine is available
* to change the effective uid of the current program.
*/
-/*#define HAS_SETEUID / **/
+#define HAS_SETEUID /**/
/* HAS_SETLINEBUF:
* This symbol, if defined, indicates that the setlinebuf routine is
* available to change stderr or stdout from block-buffered or unbuffered
* to a line-buffered mode.
*/
-/*#define HAS_SETLINEBUF / **/
+#define HAS_SETLINEBUF /**/
/* HAS_SETLOCALE:
* This symbol, if defined, indicates that the setlocale routine is
* This symbol, if defined, indicates that the setpgrp2() (as in DG/UX)
* routine is available to set the current process group.
*/
-#define HAS_SETPGRP2 /**/
+/*#define HAS_SETPGRP2 / **/
/* HAS_SETPRIORITY:
* This symbol, if defined, indicates that the setpriority routine is
* process.
*/
#define HAS_SETREGID /**/
-#define HAS_SETRESGID /**/
+/*#define HAS_SETRESGID / **/
/* HAS_SETREUID:
* This symbol, if defined, indicates that the setreuid routine is
* process.
*/
#define HAS_SETREUID /**/
-#define HAS_SETRESUID /**/
+/*#define HAS_SETRESUID / **/
/* HAS_SETRGID:
* This symbol, if defined, indicates that the setrgid routine is available
* to change the real gid of the current program.
*/
-/*#define HAS_SETRGID / **/
+#define HAS_SETRGID /**/
/* HAS_SETRUID:
* This symbol, if defined, indicates that the setruid routine is available
* to change the real uid of the current program.
*/
-/*#define HAS_SETRUID / **/
+#define HAS_SETRUID /**/
/* HAS_SETSID:
* This symbol, if defined, indicates that the setsid routine is
/* HAS_WAIT4:
* This symbol, if defined, indicates that wait4() exists.
*/
-/*#define HAS_WAIT4 / **/
+#define HAS_WAIT4 /**/
/* HAS_WAITPID:
* This symbol, if defined, indicates that the waitpid routine is
* This symbol, if defined, indicates to the C program that it should
* include <sys/select.h> in order to get definition of struct timeval.
*/
-/*#define I_SYS_SELECT / **/
+#define I_SYS_SELECT /**/
/* I_SYS_STAT:
* This symbol, if defined, indicates to the C program that it should
* preprocessor can make decisions based on it.
*/
#define INTSIZE 4 /**/
-#define LONGSIZE 4 /**/
+#define LONGSIZE 8 /**/
#define SHORTSIZE 2 /**/
/* MULTIARCH:
*/
#define HAS_QUAD /**/
#ifdef HAS_QUAD
-# define Quad_t long long /**/
-# define Uquad_t unsigned long long /**/
-# define QUADKIND 3 /**/
+# define Quad_t long /**/
+# define Uquad_t unsigned long /**/
+# define QUADKIND 2 /**/
# define QUAD_IS_INT 1
# define QUAD_IS_LONG 2
# define QUAD_IS_LONG_LONG 3
* This symbol, if defined, indicates to the C program that it should
* include <sys/access.h>.
*/
-/*#define I_SYS_ACCESS / **/
+#define I_SYS_ACCESS /**/
/* I_SYS_SECURITY:
* This symbol, if defined, indicates to the C program that it should
* include <sys/security.h>.
*/
-/*#define I_SYS_SECURITY / **/
-
-/* OSNAME:
- * This symbol contains the name of the operating system, as determined
- * by Configure. You shouldn't rely on it too much; the specific
- * feature tests from Configure are generally more reliable.
- */
-/* OSVERS:
- * This symbol contains the version of the operating system, as determined
- * by Configure. You shouldn't rely on it too much; the specific
- * feature tests from Configure are generally more reliable.
- */
-#define OSNAME "hpux" /**/
-#define OSVERS "11.00" /**/
+#define I_SYS_SECURITY /**/
/* MEM_ALIGNBYTES:
* This symbol contains the number of bytes required to align a
#define MEM_ALIGNBYTES 8
#endif
-/* ARCHLIB:
- * This variable, if defined, holds the name of the directory in
- * which the user wants to put architecture-dependent public
- * library files for perl5. It is most often a local directory
- * such as /usr/local/lib. Programs using this variable must be
- * prepared to deal with filename expansion. If ARCHLIB is the
- * same as PRIVLIB, it is not defined, since presumably the
- * program already searches PRIVLIB.
- */
-/* ARCHLIB_EXP:
- * This symbol contains the ~name expanded version of ARCHLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#define ARCHLIB "/opt/perl/lib/5.9.0/PA-RISC2.0" /**/
-#define ARCHLIB_EXP "/opt/perl/lib/5.9.0/PA-RISC2.0" /**/
-
-/* ARCHNAME:
- * This symbol holds a string representing the architecture name.
- * It may be used to construct an architecture-dependant pathname
- * where library files may be held under a private library, for
- * instance.
- */
-#define ARCHNAME "PA-RISC2.0" /**/
-
-/* HAS_ATOLF:
- * This symbol, if defined, indicates that the atolf routine is
- * available to convert strings into long doubles.
- */
-/*#define HAS_ATOLF / **/
-
-/* HAS_ATOLL:
- * This symbol, if defined, indicates that the atoll routine is
- * available to convert strings into long longs.
- */
-/*#define HAS_ATOLL / **/
-
-/* BIN:
- * This symbol holds the path of the bin directory where the package will
- * be installed. Program must be prepared to deal with ~name substitution.
- */
-/* BIN_EXP:
- * This symbol is the filename expanded version of the BIN symbol, for
- * programs that do not want to deal with that at run-time.
- */
-#define BIN "/opt/perl/bin" /**/
-#define BIN_EXP "/opt/perl/bin" /**/
-
/* BYTEORDER:
* This symbol holds the hexadecimal constant defined in byteorder,
* in a UV, i.e. 0x1234 or 0x4321 or 0x12345678, etc...
# define BYTEORDER 0x4321
# endif
#else
-#define BYTEORDER 0x4321 /* large digits for MSB */
+#define BYTEORDER 0x12345678 /* large digits for MSB */
#endif /* NeXT */
-/* CAT2:
- * This macro catenates 2 tokens together.
- */
-/* STRINGIFY:
- * This macro surrounds its token with double quotes.
- */
-#if 42 == 1
-#define CAT2(a,b) a/**/b
-#define STRINGIFY(a) "a"
- /* If you can get stringification with catify, tell me how! */
-#endif
-#if 42 == 42
-#define PeRl_CaTiFy(a, b) a ## b
-#define PeRl_StGiFy(a) #a
-/* the additional level of indirection enables these macros to be
- * used as arguments to other macros. See K&R 2nd ed., page 231. */
-#define CAT2(a,b) PeRl_CaTiFy(a,b)
-#define StGiFy(a) PeRl_StGiFy(a)
-#define STRINGIFY(a) PeRl_StGiFy(a)
-#endif
-#if 42 != 1 && 42 != 42
-# include "Bletch: How does this C preprocessor catenate tokens?"
-#endif
-
-/* CPPSTDIN:
- * This symbol contains the first part of the string which will invoke
- * the C preprocessor on the standard input and produce to standard
- * output. Typical value of "cc -E" or "/lib/cpp", but it can also
- * call a wrapper. See CPPRUN.
- */
-/* CPPMINUS:
- * This symbol contains the second part of the string which will invoke
- * the C preprocessor on the standard input and produce to standard
- * output. This symbol will have the value "-" if CPPSTDIN needs a minus
- * to specify standard input, otherwise the value is "".
- */
-/* CPPRUN:
- * This symbol contains the string which will invoke a C preprocessor on
- * the standard input and produce to standard output. It needs to end
- * with CPPLAST, after all other preprocessor flags have been specified.
- * The main difference with CPPSTDIN is that this program will never be a
- * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
- * available directly to the user. Note that it may well be different from
- * the preprocessor used to compile the C program.
- */
-/* CPPLAST:
- * This symbol is intended to be used along with CPPRUN in the same manner
- * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "".
- */
-#define CPPSTDIN "cc -E -Aa -D__STDC_EXT__"
-#define CPPMINUS "-"
-#define CPPRUN "cc -E -Aa -D__STDC_EXT__"
-#define CPPLAST "-"
-
-/* HAS__FWALK:
- * This symbol, if defined, indicates that the _fwalk system call is
- * available to apply a function to all the file handles.
- */
-/*#define HAS__FWALK / **/
-
-/* HAS_ACCESS:
- * This manifest constant lets the C program know that the access()
- * system call is available to check for accessibility using real UID/GID.
- * (always present on UNIX.)
- */
-#define HAS_ACCESS /**/
-
-/* HAS_ASCTIME_R:
- * This symbol, if defined, indicates that the asctime_r routine
- * is available to asctime re-entrantly.
- */
-/* ASCTIME_R_PROTO:
- * This symbol encodes the prototype of asctime_r.
- * It is zero if d_asctime_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_asctime_r
- * is defined.
- */
-/*#define HAS_ASCTIME_R / **/
-#define ASCTIME_R_PROTO 0 /**/
-
/* CASTI32:
* This symbol is defined if the C compiler can cast negative
* or large floating point numbers to 32-bit ints.
*/
-#define CASTI32 /**/
+/*#define CASTI32 / **/
/* CASTNEGFLOAT:
* This symbol is defined if the C compiler can cast negative
#define CASTNEGFLOAT /**/
#define CASTFLAGS 0 /**/
-/* HAS_CLASS:
- * This symbol, if defined, indicates that the class routine is
- * available to classify doubles. Available for example in AIX.
- * The returned values are defined in <float.h> and are:
- *
- * FP_PLUS_NORM Positive normalized, nonzero
- * FP_MINUS_NORM Negative normalized, nonzero
- * FP_PLUS_DENORM Positive denormalized, nonzero
- * FP_MINUS_DENORM Negative denormalized, nonzero
- * FP_PLUS_ZERO +0.0
- * FP_MINUS_ZERO -0.0
- * FP_PLUS_INF +INF
- * FP_MINUS_INF -INF
- * FP_NANS Signaling Not a Number (NaNS)
- * FP_NANQ Quiet Not a Number (NaNQ)
- */
-/*#define HAS_CLASS / **/
-
/* VOID_CLOSEDIR:
* This symbol, if defined, indicates that the closedir() routine
* does not return a value.
*/
/*#define VOID_CLOSEDIR / **/
-/* HAS_STRUCT_CMSGHDR:
- * This symbol, if defined, indicates that the struct cmsghdr
- * is supported.
+/* HAS_FD_SET:
+ * This symbol, when defined, indicates presence of the fd_set typedef
+ * in <sys/types.h>
*/
-/*#define HAS_STRUCT_CMSGHDR / **/
+#define HAS_FD_SET /**/
-/* HAS_CRYPT_R:
- * This symbol, if defined, indicates that the crypt_r routine
- * is available to crypt re-entrantly.
- */
-/* CRYPT_R_PROTO:
- * This symbol encodes the prototype of crypt_r.
- * It is zero if d_crypt_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_crypt_r
- * is defined.
+/* Gconvert:
+ * This preprocessor macro is defined to convert a floating point
+ * number to a string without a trailing decimal point. This
+ * emulates the behavior of sprintf("%g"), but is sometimes much more
+ * efficient. If gconvert() is not available, but gcvt() drops the
+ * trailing decimal point, then gcvt() is used. If all else fails,
+ * a macro using sprintf("%g") is used. Arguments for the Gconvert
+ * macro are: value, number of digits, whether trailing zeros should
+ * be retained, and the output buffer.
+ * The usual values are:
+ * d_Gconvert='gconvert((x),(n),(t),(b))'
+ * d_Gconvert='gcvt((x),(n),(b))'
+ * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
+ * The last two assume trailing zeros should not be kept.
*/
-/*#define HAS_CRYPT_R / **/
-#define CRYPT_R_PROTO 0 /**/
+#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
-/* HAS_CSH:
- * This symbol, if defined, indicates that the C-shell exists.
+/* HAS_GETPAGESIZE:
+ * This symbol, if defined, indicates that the getpagesize system call
+ * is available to get system page size, which is the granularity of
+ * many memory management calls.
*/
-/* CSH:
- * This symbol, if defined, contains the full pathname of csh.
+#define HAS_GETPAGESIZE /**/
+
+/* HAS_GNULIBC:
+ * This symbol, if defined, indicates to the C program that
+ * the GNU C library is being used. A better check is to use
+ * the __GLIBC__ and __GLIBC_MINOR__ symbols supplied with glibc.
*/
-#define HAS_CSH /**/
-#ifdef HAS_CSH
-#define CSH "/usr/bin/csh" /**/
+/*#define HAS_GNULIBC / **/
+#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
+# define _GNU_SOURCE
#endif
+/* HAS_ISASCII:
+ * This manifest constant lets the C program know that isascii
+ * is available.
+ */
+#define HAS_ISASCII /**/
-/* HAS_CTIME_R:
- * This symbol, if defined, indicates that the ctime_r routine
- * is available to ctime re-entrantly.
+/* HAS_LCHOWN:
+ * This symbol, if defined, indicates that the lchown routine is
+ * available to operate on a symbolic link (instead of following the
+ * link).
*/
-/* CTIME_R_PROTO:
- * This symbol encodes the prototype of ctime_r.
- * It is zero if d_ctime_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ctime_r
- * is defined.
+#define HAS_LCHOWN /**/
+
+/* HAS_OPEN3:
+ * This manifest constant lets the C program know that the three
+ * argument form of open(2) is available.
*/
-/*#define HAS_CTIME_R / **/
-#define CTIME_R_PROTO 0 /**/
+#define HAS_OPEN3 /**/
-/* DLSYM_NEEDS_UNDERSCORE:
- * This symbol, if defined, indicates that we need to prepend an
- * underscore to the symbol name before calling dlsym(). This only
- * makes sense if you *have* dlsym, which we will presume is the
- * case if you're using dl_dlopen.xs.
+/* HAS_SAFE_BCOPY:
+ * This symbol, if defined, indicates that the bcopy routine is available
+ * to copy potentially overlapping memory blocks. Normally, you should
+ * probably use memmove() or memcpy(). If neither is defined, roll your
+ * own version.
*/
-/*#define DLSYM_NEEDS_UNDERSCORE / **/
+/*#define HAS_SAFE_BCOPY / **/
-/* HAS_DRAND48_R:
- * This symbol, if defined, indicates that the drand48_r routine
- * is available to drand48 re-entrantly.
+/* HAS_SAFE_MEMCPY:
+ * This symbol, if defined, indicates that the memcpy routine is available
+ * to copy potentially overlapping memory blocks. If you need to
+ * copy overlapping memory blocks, you should check HAS_MEMMOVE and
+ * use memmove() instead, if available.
*/
-/* DRAND48_R_PROTO:
- * This symbol encodes the prototype of drand48_r.
- * It is zero if d_drand48_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_drand48_r
- * is defined.
+/*#define HAS_SAFE_MEMCPY / **/
+
+/* HAS_SANE_MEMCMP:
+ * This symbol, if defined, indicates that the memcmp routine is available
+ * and can be used to compare relative magnitudes of chars with their high
+ * bits set. If it is not defined, roll your own version.
+ */
+#define HAS_SANE_MEMCMP /**/
+
+/* HAS_SIGACTION:
+ * This symbol, if defined, indicates that Vr4's sigaction() routine
+ * is available.
+ */
+#define HAS_SIGACTION /**/
+
+/* HAS_SIGSETJMP:
+ * This variable indicates to the C program that the sigsetjmp()
+ * routine is available to save the calling process's registers
+ * and stack environment for later use by siglongjmp(), and
+ * to optionally save the process's signal mask. See
+ * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
+ */
+/* Sigjmp_buf:
+ * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
+ */
+/* Sigsetjmp:
+ * This macro is used in the same way as sigsetjmp(), but will invoke
+ * traditional setjmp() if sigsetjmp isn't available.
+ * See HAS_SIGSETJMP.
+ */
+/* Siglongjmp:
+ * This macro is used in the same way as siglongjmp(), but will invoke
+ * traditional longjmp() if siglongjmp isn't available.
+ * See HAS_SIGSETJMP.
+ */
+#define HAS_SIGSETJMP /**/
+#ifdef HAS_SIGSETJMP
+#define Sigjmp_buf sigjmp_buf
+#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
+#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
+#else
+#define Sigjmp_buf jmp_buf
+#define Sigsetjmp(buf,save_mask) setjmp((buf))
+#define Siglongjmp(buf,retval) longjmp((buf),(retval))
+#endif
+
+/* USE_STDIO_PTR:
+ * This symbol is defined if the _ptr and _cnt fields (or similar)
+ * of the stdio FILE structure can be used to access the stdio buffer
+ * for a file handle. If this is defined, then the FILE_ptr(fp)
+ * and FILE_cnt(fp) macros will also be defined and should be used
+ * to access these fields.
+ */
+/* FILE_ptr:
+ * This macro is used to access the _ptr field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_PTR is defined.
+ */
+/* STDIO_PTR_LVALUE:
+ * This symbol is defined if the FILE_ptr macro can be used as an
+ * lvalue.
+ */
+/* FILE_cnt:
+ * This macro is used to access the _cnt field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_PTR is defined.
+ */
+/* STDIO_CNT_LVALUE:
+ * This symbol is defined if the FILE_cnt macro can be used as an
+ * lvalue.
+ */
+/* STDIO_PTR_LVAL_SETS_CNT:
+ * This symbol is defined if using the FILE_ptr macro as an lvalue
+ * to increase the pointer by n has the side effect of decreasing the
+ * value of File_cnt(fp) by n.
+ */
+/* STDIO_PTR_LVAL_NOCHANGE_CNT:
+ * This symbol is defined if using the FILE_ptr macro as an lvalue
+ * to increase the pointer by n leaves File_cnt(fp) unchanged.
+ */
+#define USE_STDIO_PTR /**/
+#ifdef USE_STDIO_PTR
+#define FILE_ptr(fp) ((fp)->_ptr)
+#define STDIO_PTR_LVALUE /**/
+#define FILE_cnt(fp) ((fp)->_cnt)
+#define STDIO_CNT_LVALUE /**/
+/*#define STDIO_PTR_LVAL_SETS_CNT / **/
+#define STDIO_PTR_LVAL_NOCHANGE_CNT /**/
+#endif
+
+/* USE_STDIO_BASE:
+ * This symbol is defined if the _base field (or similar) of the
+ * stdio FILE structure can be used to access the stdio buffer for
+ * a file handle. If this is defined, then the FILE_base(fp) macro
+ * will also be defined and should be used to access this field.
+ * Also, the FILE_bufsiz(fp) macro will be defined and should be used
+ * to determine the number of bytes in the buffer. USE_STDIO_BASE
+ * will never be defined unless USE_STDIO_PTR is.
+ */
+/* FILE_base:
+ * This macro is used to access the _base field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_BASE is defined.
+ */
+/* FILE_bufsiz:
+ * This macro is used to determine the number of bytes in the I/O
+ * buffer pointed to by _base field (or equivalent) of the FILE
+ * structure pointed to its argument. This macro will always be defined
+ * if USE_STDIO_BASE is defined.
+ */
+#define USE_STDIO_BASE /**/
+#ifdef USE_STDIO_BASE
+#define FILE_base(fp) ((fp)->_base)
+#define FILE_bufsiz(fp) ((fp)->_cnt + (fp)->_ptr - (fp)->_base)
+#endif
+
+/* HAS_VPRINTF:
+ * This symbol, if defined, indicates that the vprintf routine is available
+ * to printf with a pointer to an argument list. If unavailable, you
+ * may need to write your own, probably in terms of _doprnt().
+ */
+/* USE_CHAR_VSPRINTF:
+ * This symbol is defined if this system has vsprintf() returning type
+ * (char*). The trend seems to be to declare it as "int vsprintf()". It
+ * is up to the package author to declare vsprintf correctly based on the
+ * symbol.
+ */
+#define HAS_VPRINTF /**/
+/*#define USE_CHAR_VSPRINTF / **/
+
+/* DOUBLESIZE:
+ * This symbol contains the size of a double, so that the C preprocessor
+ * can make decisions based on it.
+ */
+#define DOUBLESIZE 8 /**/
+
+/* I_TIME:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <time.h>.
+ */
+/* I_SYS_TIME:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/time.h>.
+ */
+/* I_SYS_TIME_KERNEL:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/time.h> with KERNEL defined.
+ */
+/* HAS_TM_TM_ZONE:
+ * This symbol, if defined, indicates to the C program that
+ * the struct tm has a tm_zone field.
+ */
+/* HAS_TM_TM_GMTOFF:
+ * This symbol, if defined, indicates to the C program that
+ * the struct tm has a tm_gmtoff field.
+ */
+/*#define I_TIME / **/
+#define I_SYS_TIME /**/
+/*#define I_SYS_TIME_KERNEL / **/
+#define HAS_TM_TM_ZONE /**/
+#define HAS_TM_TM_GMTOFF /**/
+
+/* VAL_O_NONBLOCK:
+ * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
+ * non-blocking I/O for the file descriptor. Note that there is no way
+ * back, i.e. you cannot turn it blocking again this way. If you wish to
+ * alternatively switch between blocking and non-blocking, use the
+ * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
+ */
+/* VAL_EAGAIN:
+ * This symbol holds the errno error code set by read() when no data was
+ * present on the non-blocking file descriptor.
+ */
+/* RD_NODATA:
+ * This symbol holds the return code from read() when no data is present
+ * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
+ * not defined, then you can't distinguish between no data and EOF by
+ * issuing a read(). You'll have to find another way to tell for sure!
+ */
+/* EOF_NONBLOCK:
+ * This symbol, if defined, indicates to the C program that a read() on
+ * a non-blocking file descriptor will return 0 on EOF, and not the value
+ * held in RD_NODATA (-1 usually, in that case!).
+ */
+#define VAL_O_NONBLOCK O_NONBLOCK
+#define VAL_EAGAIN EAGAIN
+#define RD_NODATA -1
+#define EOF_NONBLOCK
+
+/* PTRSIZE:
+ * This symbol contains the size of a pointer, so that the C preprocessor
+ * can make decisions based on it. It will be sizeof(void *) if
+ * the compiler supports (void *); otherwise it will be
+ * sizeof(char *).
+ */
+#define PTRSIZE 8 /**/
+
+/* Drand01:
+ * This macro is to be used to generate uniformly distributed
+ * random numbers over the range [0., 1.[. You may have to supply
+ * an 'extern double drand48();' in your program since SunOS 4.1.3
+ * doesn't provide you with anything relevant in its headers.
+ * See HAS_DRAND48_PROTO.
+ */
+/* Rand_seed_t:
+ * This symbol defines the type of the argument of the
+ * random seed function.
+ */
+/* seedDrand01:
+ * This symbol defines the macro to be used in seeding the
+ * random number generator (see Drand01).
+ */
+/* RANDBITS:
+ * This symbol indicates how many bits are produced by the
+ * function used to generate normalized random numbers.
+ * Values include 15, 16, 31, and 48.
+ */
+#define Drand01() drand48() /**/
+#define Rand_seed_t long /**/
+#define seedDrand01(x) srand48((Rand_seed_t)x) /**/
+#define RANDBITS 48 /**/
+
+/* SSize_t:
+ * This symbol holds the type used by functions that return
+ * a count of bytes or an error condition. It must be a signed type.
+ * It is usually ssize_t, but may be long or int, etc.
+ * It may be necessary to include <sys/types.h> or <unistd.h>
+ * to get any typedef'ed information.
+ * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
+ */
+#define SSize_t ssize_t /* signed count of bytes */
+
+/* EBCDIC:
+ * This symbol, if defined, indicates that this system uses
+ * EBCDIC encoding.
+ */
+/*#define EBCDIC / **/
+
+/* ARCHLIB:
+ * This variable, if defined, holds the name of the directory in
+ * which the user wants to put architecture-dependent public
+ * library files for perl5. It is most often a local directory
+ * such as /usr/local/lib. Programs using this variable must be
+ * prepared to deal with filename expansion. If ARCHLIB is the
+ * same as PRIVLIB, it is not defined, since presumably the
+ * program already searches PRIVLIB.
+ */
+/* ARCHLIB_EXP:
+ * This symbol contains the ~name expanded version of ARCHLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define ARCHLIB "/opt/perl/lib/5.9.0/alpha-dec_osf" /**/
+#define ARCHLIB_EXP "/opt/perl/lib/5.9.0/alpha-dec_osf" /**/
+
+/* BIN:
+ * This symbol holds the path of the bin directory where the package will
+ * be installed. Program must be prepared to deal with ~name substitution.
+ */
+/* BIN_EXP:
+ * This symbol is the filename expanded version of the BIN symbol, for
+ * programs that do not want to deal with that at run-time.
+ */
+#define BIN "/opt/perl/bin" /**/
+#define BIN_EXP "/opt/perl/bin" /**/
+
+/* PERL_INC_VERSION_LIST:
+ * This variable specifies the list of subdirectories in over
+ * which perl.c:incpush() and lib/lib.pm will automatically
+ * search when adding directories to @INC, in a format suitable
+ * for a C initialization string. See the inc_version_list entry
+ * in Porting/Glossary for more details.
+ */
+#define PERL_INC_VERSION_LIST 0 /**/
+
+/* INSTALL_USR_BIN_PERL:
+ * This symbol, if defined, indicates that Perl is to be installed
+ * also as /usr/bin/perl.
+ */
+/*#define INSTALL_USR_BIN_PERL / **/
+
+/* PERL_OTHERLIBDIRS:
+ * This variable contains a colon-separated set of paths for the perl
+ * binary to search for additional library files or modules.
+ * These directories will be tacked to the end of @INC.
+ * Perl will automatically search below each path for version-
+ * and architecture-specific directories. See PERL_INC_VERSION_LIST
+ * for more details.
+ */
+/*#define PERL_OTHERLIBDIRS " " / **/
+
+/* PRIVLIB:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ */
+/* PRIVLIB_EXP:
+ * This symbol contains the ~name expanded version of PRIVLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define PRIVLIB "/opt/perl/lib/5.9.0" /**/
+#define PRIVLIB_EXP "/opt/perl/lib/5.9.0" /**/
+
+/* SITEARCH:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ * The standard distribution will put nothing in this directory.
+ * After perl has been installed, users may install their own local
+ * architecture-dependent modules in this directory with
+ * MakeMaker Makefile.PL
+ * or equivalent. See INSTALL for details.
+ */
+/* SITEARCH_EXP:
+ * This symbol contains the ~name expanded version of SITEARCH, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define SITEARCH "/opt/perl/lib/site_perl/5.9.0/alpha-dec_osf" /**/
+#define SITEARCH_EXP "/opt/perl/lib/site_perl/5.9.0/alpha-dec_osf" /**/
+
+/* SITELIB:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ * The standard distribution will put nothing in this directory.
+ * After perl has been installed, users may install their own local
+ * architecture-independent modules in this directory with
+ * MakeMaker Makefile.PL
+ * or equivalent. See INSTALL for details.
+ */
+/* SITELIB_EXP:
+ * This symbol contains the ~name expanded version of SITELIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+/* SITELIB_STEM:
+ * This define is SITELIB_EXP with any trailing version-specific component
+ * removed. The elements in inc_version_list (inc_version_list.U) can
+ * be tacked onto this variable to generate a list of directories to search.
+ */
+#define SITELIB "/opt/perl/lib/site_perl/5.9.0" /**/
+#define SITELIB_EXP "/opt/perl/lib/site_perl/5.9.0" /**/
+#define SITELIB_STEM "/opt/perl/lib/site_perl" /**/
+
+/* PERL_VENDORARCH:
+ * If defined, this symbol contains the name of a private library.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world.
+ * It may have a ~ on the front.
+ * The standard distribution will put nothing in this directory.
+ * Vendors who distribute perl may wish to place their own
+ * architecture-dependent modules and extensions in this directory with
+ * MakeMaker Makefile.PL INSTALLDIRS=vendor
+ * or equivalent. See INSTALL for details.
+ */
+/* PERL_VENDORARCH_EXP:
+ * This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+/*#define PERL_VENDORARCH "" / **/
+/*#define PERL_VENDORARCH_EXP "" / **/
+
+/* PERL_VENDORLIB_EXP:
+ * This symbol contains the ~name expanded version of VENDORLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+/* PERL_VENDORLIB_STEM:
+ * This define is PERL_VENDORLIB_EXP with any trailing version-specific component
+ * removed. The elements in inc_version_list (inc_version_list.U) can
+ * be tacked onto this variable to generate a list of directories to search.
+ */
+/*#define PERL_VENDORLIB_EXP "" / **/
+/*#define PERL_VENDORLIB_STEM "" / **/
+
+/* OSNAME:
+ * This symbol contains the name of the operating system, as determined
+ * by Configure. You shouldn't rely on it too much; the specific
+ * feature tests from Configure are generally more reliable.
+ */
+/* OSVERS:
+ * This symbol contains the version of the operating system, as determined
+ * by Configure. You shouldn't rely on it too much; the specific
+ * feature tests from Configure are generally more reliable.
+ */
+#define OSNAME "dec_osf" /**/
+#define OSVERS "4.0f" /**/
+
+/* CAT2:
+ * This macro catenates 2 tokens together.
+ */
+/* STRINGIFY:
+ * This macro surrounds its token with double quotes.
+ */
+#if 42 == 1
+#define CAT2(a,b) a/**/b
+#define STRINGIFY(a) "a"
+ /* If you can get stringification with catify, tell me how! */
+#endif
+#if 42 == 42
+#define PeRl_CaTiFy(a, b) a ## b
+#define PeRl_StGiFy(a) #a
+/* the additional level of indirection enables these macros to be
+ * used as arguments to other macros. See K&R 2nd ed., page 231. */
+#define CAT2(a,b) PeRl_CaTiFy(a,b)
+#define StGiFy(a) PeRl_StGiFy(a)
+#define STRINGIFY(a) PeRl_StGiFy(a)
+#endif
+#if 42 != 1 && 42 != 42
+# include "Bletch: How does this C preprocessor catenate tokens?"
+#endif
+
+/* CPPSTDIN:
+ * This symbol contains the first part of the string which will invoke
+ * the C preprocessor on the standard input and produce to standard
+ * output. Typical value of "cc -E" or "/lib/cpp", but it can also
+ * call a wrapper. See CPPRUN.
+ */
+/* CPPMINUS:
+ * This symbol contains the second part of the string which will invoke
+ * the C preprocessor on the standard input and produce to standard
+ * output. This symbol will have the value "-" if CPPSTDIN needs a minus
+ * to specify standard input, otherwise the value is "".
+ */
+/* CPPRUN:
+ * This symbol contains the string which will invoke a C preprocessor on
+ * the standard input and produce to standard output. It needs to end
+ * with CPPLAST, after all other preprocessor flags have been specified.
+ * The main difference with CPPSTDIN is that this program will never be a
+ * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
+ * available directly to the user. Note that it may well be different from
+ * the preprocessor used to compile the C program.
+ */
+/* CPPLAST:
+ * This symbol is intended to be used along with CPPRUN in the same manner
+ * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "".
+ */
+#define CPPSTDIN "cppstdin"
+#define CPPMINUS ""
+#define CPPRUN "/usr/local/bin/cpp"
+#define CPPLAST ""
+
+/* HAS_ACCESS:
+ * This manifest constant lets the C program know that the access()
+ * system call is available to check for accessibility using real UID/GID.
+ * (always present on UNIX.)
+ */
+#define HAS_ACCESS /**/
+
+/* HASATTRIBUTE:
+ * This symbol indicates the C compiler can check for function attributes,
+ * such as printf formats. This is normally only supported by GNU cc.
+ */
+/*#define HASATTRIBUTE / **/
+#ifndef HASATTRIBUTE
+#ifdef __attribute__
+#undef __attribute__
+#endif
+#define __attribute__(_arg_)
+#endif
+
+/* HAS_CRYPT:
+ * This symbol, if defined, indicates that the crypt routine is available
+ * to encrypt passwords and the like.
+ */
+#define HAS_CRYPT /**/
+
+/* HAS_CSH:
+ * This symbol, if defined, indicates that the C-shell exists.
+ */
+/* CSH:
+ * This symbol, if defined, contains the full pathname of csh.
+ */
+#define HAS_CSH /**/
+#ifdef HAS_CSH
+#define CSH "/usr/bin/csh" /**/
+#endif
+
+/* SETUID_SCRIPTS_ARE_SECURE_NOW:
+ * This symbol, if defined, indicates that the bug that prevents
+ * setuid scripts from being secure is not present in this kernel.
+ */
+/* DOSUID:
+ * This symbol, if defined, indicates that the C program should
+ * check the script that it is executing for setuid/setgid bits, and
+ * attempt to emulate setuid/setgid on systems that have disabled
+ * setuid #! scripts because the kernel can't do it securely.
+ * It is up to the package designer to make sure that this emulation
+ * is done securely. Among other things, it should do an fstat on
+ * the script it just opened to make sure it really is a setuid/setgid
+ * script, it should make sure the arguments passed correspond exactly
+ * to the argument on the #! line, and it should not trust any
+ * subprocesses to which it must pass the filename rather than the
+ * file descriptor of the script to be executed.
+ */
+/*#define SETUID_SCRIPTS_ARE_SECURE_NOW / **/
+/*#define DOSUID / **/
+
+/* HAS_ENDGRENT:
+ * This symbol, if defined, indicates that the getgrent routine is
+ * available for finalizing sequential access of the group database.
+ */
+#define HAS_ENDGRENT /**/
+
+/* HAS_ENDHOSTENT:
+ * This symbol, if defined, indicates that the endhostent() routine is
+ * available to close whatever was being used for host queries.
+ */
+#define HAS_ENDHOSTENT /**/
+
+/* HAS_ENDNETENT:
+ * This symbol, if defined, indicates that the endnetent() routine is
+ * available to close whatever was being used for network queries.
+ */
+#define HAS_ENDNETENT /**/
+
+/* HAS_ENDPROTOENT:
+ * This symbol, if defined, indicates that the endprotoent() routine is
+ * available to close whatever was being used for protocol queries.
+ */
+#define HAS_ENDPROTOENT /**/
+
+/* HAS_ENDPWENT:
+ * This symbol, if defined, indicates that the getgrent routine is
+ * available for finalizing sequential access of the passwd database.
+ */
+#define HAS_ENDPWENT /**/
+
+/* HAS_ENDSERVENT:
+ * This symbol, if defined, indicates that the endservent() routine is
+ * available to close whatever was being used for service queries.
+ */
+#define HAS_ENDSERVENT /**/
+
+/* FLEXFILENAMES:
+ * This symbol, if defined, indicates that the system supports filenames
+ * longer than 14 characters.
+ */
+#define FLEXFILENAMES /**/
+
+/* HAS_GETGRENT:
+ * This symbol, if defined, indicates that the getgrent routine is
+ * available for sequential access of the group database.
+ */
+#define HAS_GETGRENT /**/
+
+/* HAS_GETHOSTBYADDR:
+ * This symbol, if defined, indicates that the gethostbyaddr() routine is
+ * available to look up hosts by their IP addresses.
+ */
+#define HAS_GETHOSTBYADDR /**/
+
+/* HAS_GETHOSTBYNAME:
+ * This symbol, if defined, indicates that the gethostbyname() routine is
+ * available to look up host names in some data base or other.
+ */
+#define HAS_GETHOSTBYNAME /**/
+
+/* HAS_GETHOSTENT:
+ * This symbol, if defined, indicates that the gethostent() routine is
+ * available to look up host names in some data base or another.
+ */
+#define HAS_GETHOSTENT /**/
+
+/* HAS_GETHOSTNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * gethostname() routine to derive the host name. See also HAS_UNAME
+ * and PHOSTNAME.
*/
-/*#define HAS_DRAND48_R / **/
-#define DRAND48_R_PROTO 0 /**/
+/* HAS_UNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * uname() routine to derive the host name. See also HAS_GETHOSTNAME
+ * and PHOSTNAME.
+ */
+/* PHOSTNAME:
+ * This symbol, if defined, indicates the command to feed to the
+ * popen() routine to derive the host name. See also HAS_GETHOSTNAME
+ * and HAS_UNAME. Note that the command uses a fully qualified path,
+ * so that it is safe even if used by a process with super-user
+ * privileges.
+ */
+/* HAS_PHOSTNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * contents of PHOSTNAME as a command to feed to the popen() routine
+ * to derive the host name.
+ */
+#define HAS_GETHOSTNAME /**/
+#define HAS_UNAME /**/
+/*#define HAS_PHOSTNAME / **/
+#ifdef HAS_PHOSTNAME
+#define PHOSTNAME "" /* How to get the host name */
+#endif
-/* HAS_DRAND48_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the drand48() function. Otherwise, it is up
- * to the program to supply one. A good guess is
- * extern double drand48(void);
+/* HAS_GETNETBYADDR:
+ * This symbol, if defined, indicates that the getnetbyaddr() routine is
+ * available to look up networks by their IP addresses.
*/
-#define HAS_DRAND48_PROTO /**/
+#define HAS_GETNETBYADDR /**/
-/* HAS_ENDGRENT:
- * This symbol, if defined, indicates that the getgrent routine is
- * available for finalizing sequential access of the group database.
+/* HAS_GETNETBYNAME:
+ * This symbol, if defined, indicates that the getnetbyname() routine is
+ * available to look up networks by their names.
*/
-#define HAS_ENDGRENT /**/
+#define HAS_GETNETBYNAME /**/
-/* HAS_ENDGRENT_R:
- * This symbol, if defined, indicates that the endgrent_r routine
- * is available to endgrent re-entrantly.
+/* HAS_GETNETENT:
+ * This symbol, if defined, indicates that the getnetent() routine is
+ * available to look up network names in some data base or another.
*/
-/* ENDGRENT_R_PROTO:
- * This symbol encodes the prototype of endgrent_r.
- * It is zero if d_endgrent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endgrent_r
- * is defined.
+#define HAS_GETNETENT /**/
+
+/* HAS_GETPROTOENT:
+ * This symbol, if defined, indicates that the getprotoent() routine is
+ * available to look up protocols in some data base or another.
*/
-/*#define HAS_ENDGRENT_R / **/
-#define ENDGRENT_R_PROTO 0 /**/
+#define HAS_GETPROTOENT /**/
-/* HAS_ENDHOSTENT:
- * This symbol, if defined, indicates that the endhostent() routine is
- * available to close whatever was being used for host queries.
+/* HAS_GETPGRP:
+ * This symbol, if defined, indicates that the getpgrp routine is
+ * available to get the current process group.
*/
-#define HAS_ENDHOSTENT /**/
+/* USE_BSD_GETPGRP:
+ * This symbol, if defined, indicates that getpgrp needs one
+ * arguments whereas USG one needs none.
+ */
+#define HAS_GETPGRP /**/
+/*#define USE_BSD_GETPGRP / **/
-/* HAS_ENDNETENT:
- * This symbol, if defined, indicates that the endnetent() routine is
- * available to close whatever was being used for network queries.
+/* HAS_GETPROTOBYNAME:
+ * This symbol, if defined, indicates that the getprotobyname()
+ * routine is available to look up protocols by their name.
+ */
+/* HAS_GETPROTOBYNUMBER:
+ * This symbol, if defined, indicates that the getprotobynumber()
+ * routine is available to look up protocols by their number.
+ */
+#define HAS_GETPROTOBYNAME /**/
+#define HAS_GETPROTOBYNUMBER /**/
+
+/* HAS_GETPWENT:
+ * This symbol, if defined, indicates that the getpwent routine is
+ * available for sequential access of the passwd database.
+ * If this is not available, the older getpw() function may be available.
+ */
+#define HAS_GETPWENT /**/
+
+/* HAS_GETSERVENT:
+ * This symbol, if defined, indicates that the getservent() routine is
+ * available to look up network services in some data base or another.
+ */
+#define HAS_GETSERVENT /**/
+
+/* HAS_GETSERVBYNAME:
+ * This symbol, if defined, indicates that the getservbyname()
+ * routine is available to look up services by their name.
+ */
+/* HAS_GETSERVBYPORT:
+ * This symbol, if defined, indicates that the getservbyport()
+ * routine is available to look up services by their port.
+ */
+#define HAS_GETSERVBYNAME /**/
+#define HAS_GETSERVBYPORT /**/
+
+/* HAS_HTONL:
+ * This symbol, if defined, indicates that the htonl() routine (and
+ * friends htons() ntohl() ntohs()) are available to do network
+ * order byte swapping.
+ */
+/* HAS_HTONS:
+ * This symbol, if defined, indicates that the htons() routine (and
+ * friends htonl() ntohl() ntohs()) are available to do network
+ * order byte swapping.
+ */
+/* HAS_NTOHL:
+ * This symbol, if defined, indicates that the ntohl() routine (and
+ * friends htonl() htons() ntohs()) are available to do network
+ * order byte swapping.
+ */
+/* HAS_NTOHS:
+ * This symbol, if defined, indicates that the ntohs() routine (and
+ * friends htonl() htons() ntohl()) are available to do network
+ * order byte swapping.
+ */
+#define HAS_HTONL /**/
+#define HAS_HTONS /**/
+#define HAS_NTOHL /**/
+#define HAS_NTOHS /**/
+
+/* HAS_LONG_DOUBLE:
+ * This symbol will be defined if the C compiler supports long
+ * doubles.
+ */
+/* LONG_DOUBLESIZE:
+ * This symbol contains the size of a long double, so that the
+ * C preprocessor can make decisions based on it. It is only
+ * defined if the system supports long doubles.
+ */
+#define HAS_LONG_DOUBLE /**/
+#ifdef HAS_LONG_DOUBLE
+#define LONG_DOUBLESIZE 8 /**/
+#endif
+
+/* HAS_LONG_LONG:
+ * This symbol will be defined if the C compiler supports long long.
+ */
+/* LONGLONGSIZE:
+ * This symbol contains the size of a long long, so that the
+ * C preprocessor can make decisions based on it. It is only
+ * defined if the system supports long long.
+ */
+#define HAS_LONG_LONG /**/
+#ifdef HAS_LONG_LONG
+#define LONGLONGSIZE 8 /**/
+#endif
+
+/* HAS_MEMCHR:
+ * This symbol, if defined, indicates that the memchr routine is available
+ * to locate characters within a C string.
+ */
+#define HAS_MEMCHR /**/
+
+/* HAS_MKSTEMP:
+ * This symbol, if defined, indicates that the mkstemp routine is
+ * available to exclusively create and open a uniquely named
+ * temporary file.
+ */
+#define HAS_MKSTEMP /**/
+
+/* HAS_MMAP:
+ * This symbol, if defined, indicates that the mmap system call is
+ * available to map a file into memory.
+ */
+/* Mmap_t:
+ * This symbol holds the return type of the mmap() system call
+ * (and simultaneously the type of the first argument).
+ * Usually set to 'void *' or 'cadd_t'.
+ */
+#define HAS_MMAP /**/
+#define Mmap_t void * /**/
+
+/* HAS_MSG:
+ * This symbol, if defined, indicates that the entire msg*(2) library is
+ * supported (IPC mechanism based on message queues).
+ */
+#define HAS_MSG /**/
+
+/* HAS_SEM:
+ * This symbol, if defined, indicates that the entire sem*(2) library is
+ * supported.
+ */
+#define HAS_SEM /**/
+
+/* HAS_SETGRENT:
+ * This symbol, if defined, indicates that the setgrent routine is
+ * available for initializing sequential access of the group database.
+ */
+#define HAS_SETGRENT /**/
+
+/* HAS_SETGROUPS:
+ * This symbol, if defined, indicates that the setgroups() routine is
+ * available to set the list of process groups. If unavailable, multiple
+ * groups are probably not supported.
+ */
+#define HAS_SETGROUPS /**/
+
+/* HAS_SETHOSTENT:
+ * This symbol, if defined, indicates that the sethostent() routine is
+ * available.
+ */
+#define HAS_SETHOSTENT /**/
+
+/* HAS_SETNETENT:
+ * This symbol, if defined, indicates that the setnetent() routine is
+ * available.
+ */
+#define HAS_SETNETENT /**/
+
+/* HAS_SETPROTOENT:
+ * This symbol, if defined, indicates that the setprotoent() routine is
+ * available.
+ */
+#define HAS_SETPROTOENT /**/
+
+/* HAS_SETPGRP:
+ * This symbol, if defined, indicates that the setpgrp routine is
+ * available to set the current process group.
+ */
+/* USE_BSD_SETPGRP:
+ * This symbol, if defined, indicates that setpgrp needs two
+ * arguments whereas USG one needs none. See also HAS_SETPGID
+ * for a POSIX interface.
+ */
+#define HAS_SETPGRP /**/
+#define USE_BSD_SETPGRP /**/
+
+/* HAS_SETPWENT:
+ * This symbol, if defined, indicates that the setpwent routine is
+ * available for initializing sequential access of the passwd database.
+ */
+#define HAS_SETPWENT /**/
+
+/* HAS_SETSERVENT:
+ * This symbol, if defined, indicates that the setservent() routine is
+ * available.
*/
-#define HAS_ENDNETENT /**/
+#define HAS_SETSERVENT /**/
-/* HAS_ENDPROTOENT:
- * This symbol, if defined, indicates that the endprotoent() routine is
- * available to close whatever was being used for protocol queries.
+/* HAS_SETVBUF:
+ * This symbol, if defined, indicates that the setvbuf routine is
+ * available to change buffering on an open stdio stream.
+ * to a line-buffered mode.
*/
-#define HAS_ENDPROTOENT /**/
+#define HAS_SETVBUF /**/
-/* HAS_ENDPWENT:
- * This symbol, if defined, indicates that the getgrent routine is
- * available for finalizing sequential access of the passwd database.
+/* HAS_SHM:
+ * This symbol, if defined, indicates that the entire shm*(2) library is
+ * supported.
*/
-#define HAS_ENDPWENT /**/
+#define HAS_SHM /**/
-/* HAS_ENDPWENT_R:
- * This symbol, if defined, indicates that the endpwent_r routine
- * is available to endpwent re-entrantly.
+/* Shmat_t:
+ * This symbol holds the return type of the shmat() system call.
+ * Usually set to 'void *' or 'char *'.
*/
-/* ENDPWENT_R_PROTO:
- * This symbol encodes the prototype of endpwent_r.
- * It is zero if d_endpwent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endpwent_r
- * is defined.
+/* HAS_SHMAT_PROTOTYPE:
+ * This symbol, if defined, indicates that the sys/shm.h includes
+ * a prototype for shmat(). Otherwise, it is up to the program to
+ * guess one. Shmat_t shmat(int, Shmat_t, int) is a good guess,
+ * but not always right so it should be emitted by the program only
+ * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs.
*/
-/*#define HAS_ENDPWENT_R / **/
-#define ENDPWENT_R_PROTO 0 /**/
+#define Shmat_t void * /**/
+#define HAS_SHMAT_PROTOTYPE /**/
-/* HAS_ENDSERVENT:
- * This symbol, if defined, indicates that the endservent() routine is
- * available to close whatever was being used for service queries.
+/* HAS_SOCKET:
+ * This symbol, if defined, indicates that the BSD socket interface is
+ * supported.
*/
-#define HAS_ENDSERVENT /**/
-
-/* HAS_FCHDIR:
- * This symbol, if defined, indicates that the fchdir routine is
- * available to change directory using a file descriptor.
+/* HAS_SOCKETPAIR:
+ * This symbol, if defined, indicates that the BSD socketpair() call is
+ * supported.
*/
-#define HAS_FCHDIR /**/
-
-/* FCNTL_CAN_LOCK:
- * This symbol, if defined, indicates that fcntl() can be used
- * for file locking. Normally on Unix systems this is defined.
- * It may be undefined on VMS.
+/* HAS_MSG_CTRUNC:
+ * This symbol, if defined, indicates that the MSG_CTRUNC is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
*/
-#define FCNTL_CAN_LOCK /**/
-
-/* HAS_FD_SET:
- * This symbol, when defined, indicates presence of the fd_set typedef
- * in <sys/types.h>
+/* HAS_MSG_DONTROUTE:
+ * This symbol, if defined, indicates that the MSG_DONTROUTE is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
*/
-#define HAS_FD_SET /**/
-
-/* HAS_FINITE:
- * This symbol, if defined, indicates that the finite routine is
- * available to check whether a double is finite (non-infinity non-NaN).
+/* HAS_MSG_OOB:
+ * This symbol, if defined, indicates that the MSG_OOB is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
*/
-/*#define HAS_FINITE / **/
-
-/* HAS_FINITEL:
- * This symbol, if defined, indicates that the finitel routine is
- * available to check whether a long double is finite
- * (non-infinity non-NaN).
+/* HAS_MSG_PEEK:
+ * This symbol, if defined, indicates that the MSG_PEEK is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
*/
-/*#define HAS_FINITEL / **/
-
-/* FLEXFILENAMES:
- * This symbol, if defined, indicates that the system supports filenames
- * longer than 14 characters.
+/* HAS_MSG_PROXY:
+ * This symbol, if defined, indicates that the MSG_PROXY is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
*/
-#define FLEXFILENAMES /**/
-
-/* HAS_FP_CLASS:
- * This symbol, if defined, indicates that the fp_class routine is
- * available to classify doubles. Available for example in Digital UNIX.
- * The returned values are defined in <math.h> and are:
- *
- * FP_SNAN Signaling NaN (Not-a-Number)
- * FP_QNAN Quiet NaN (Not-a-Number)
- * FP_POS_INF +infinity
- * FP_NEG_INF -infinity
- * FP_POS_NORM Positive normalized
- * FP_NEG_NORM Negative normalized
- * FP_POS_DENORM Positive denormalized
- * FP_NEG_DENORM Negative denormalized
- * FP_POS_ZERO +0.0 (positive zero)
- * FP_NEG_ZERO -0.0 (negative zero)
+/* HAS_SCM_RIGHTS:
+ * This symbol, if defined, indicates that the SCM_RIGHTS is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
*/
-/*#define HAS_FP_CLASS / **/
+#define HAS_SOCKET /**/
+#define HAS_SOCKETPAIR /**/
+#define HAS_MSG_CTRUNC /**/
+#define HAS_MSG_DONTROUTE /**/
+#define HAS_MSG_OOB /**/
+#define HAS_MSG_PEEK /**/
+/*#define HAS_MSG_PROXY / **/
+#define HAS_SCM_RIGHTS /**/
-/* HAS_FPCLASS:
- * This symbol, if defined, indicates that the fpclass routine is
- * available to classify doubles. Available for example in Solaris/SVR4.
- * The returned values are defined in <ieeefp.h> and are:
- *
- * FP_SNAN signaling NaN
- * FP_QNAN quiet NaN
- * FP_NINF negative infinity
- * FP_PINF positive infinity
- * FP_NDENORM negative denormalized non-zero
- * FP_PDENORM positive denormalized non-zero
- * FP_NZERO negative zero
- * FP_PZERO positive zero
- * FP_NNORM negative normalized non-zero
- * FP_PNORM positive normalized non-zero
+/* USE_STAT_BLOCKS:
+ * This symbol is defined if this system has a stat structure declaring
+ * st_blksize and st_blocks.
*/
-/*#define HAS_FPCLASS / **/
+#ifndef USE_STAT_BLOCKS
+#define USE_STAT_BLOCKS /**/
+#endif
-/* HAS_FPCLASSIFY:
- * This symbol, if defined, indicates that the fpclassify routine is
- * available to classify doubles. Available for example in HP-UX.
- * The returned values are defined in <math.h> and are
- *
- * FP_NORMAL Normalized
- * FP_ZERO Zero
- * FP_INFINITE Infinity
- * FP_SUBNORMAL Denormalized
- * FP_NAN NaN
- *
+/* HAS_STRERROR:
+ * This symbol, if defined, indicates that the strerror routine is
+ * available to translate error numbers to strings. See the writeup
+ * of Strerror() in this file before you try to define your own.
*/
-#define HAS_FPCLASSIFY /**/
-
-/* HAS_FPOS64_T:
- * This symbol will be defined if the C compiler supports fpos64_t.
+/* HAS_SYS_ERRLIST:
+ * This symbol, if defined, indicates that the sys_errlist array is
+ * available to translate error numbers to strings. The extern int
+ * sys_nerr gives the size of that table.
*/
-#define HAS_FPOS64_T /**/
-
-/* HAS_FREXPL:
- * This symbol, if defined, indicates that the frexpl routine is
- * available to break a long double floating-point number into
- * a normalized fraction and an integral power of 2.
+/* Strerror:
+ * This preprocessor symbol is defined as a macro if strerror() is
+ * not available to translate error numbers to strings but sys_errlist[]
+ * array is there.
*/
-/*#define HAS_FREXPL / **/
+#define HAS_STRERROR /**/
+#define HAS_SYS_ERRLIST /**/
+#define Strerror(e) strerror(e)
-/* HAS_STRUCT_FS_DATA:
- * This symbol, if defined, indicates that the struct fs_data
- * to do statfs() is supported.
+/* HAS_STRTOUL:
+ * This symbol, if defined, indicates that the strtoul routine is
+ * available to provide conversion of strings to unsigned long.
*/
-/*#define HAS_STRUCT_FS_DATA / **/
+#define HAS_STRTOUL /**/
-/* HAS_FSEEKO:
- * This symbol, if defined, indicates that the fseeko routine is
- * available to fseek beyond 32 bits (useful for ILP32 hosts).
+/* HAS_UNION_SEMUN:
+ * This symbol, if defined, indicates that the union semun is
+ * defined by including <sys/sem.h>. If not, the user code
+ * probably needs to define it as:
+ * union semun {
+ * int val;
+ * struct semid_ds *buf;
+ * unsigned short *array;
+ * }
*/
-#define HAS_FSEEKO /**/
-
-/* HAS_FSTATFS:
- * This symbol, if defined, indicates that the fstatfs routine is
- * available to stat filesystems by file descriptors.
+/* USE_SEMCTL_SEMUN:
+ * This symbol, if defined, indicates that union semun is
+ * used for semctl IPC_STAT.
*/
-#define HAS_FSTATFS /**/
+/* USE_SEMCTL_SEMID_DS:
+ * This symbol, if defined, indicates that struct semid_ds * is
+ * used for semctl IPC_STAT.
+ */
+/*#define HAS_UNION_SEMUN / **/
+#define USE_SEMCTL_SEMUN /**/
+#define USE_SEMCTL_SEMID_DS /**/
-/* HAS_FSYNC:
- * This symbol, if defined, indicates that the fsync routine is
- * available to write a file's modified data and attributes to
- * permanent storage.
+/* HAS_VFORK:
+ * This symbol, if defined, indicates that vfork() exists.
*/
-#define HAS_FSYNC /**/
+/*#define HAS_VFORK / **/
-/* HAS_FTELLO:
- * This symbol, if defined, indicates that the ftello routine is
- * available to ftell beyond 32 bits (useful for ILP32 hosts).
+/* Signal_t:
+ * This symbol's value is either "void" or "int", corresponding to the
+ * appropriate return type of a signal handler. Thus, you can declare
+ * a signal handler using "Signal_t (*handler)()", and define the
+ * handler using "Signal_t handler(sig)".
*/
-#define HAS_FTELLO /**/
+#define Signal_t void /* Signal handler's return type */
-/* Gconvert:
- * This preprocessor macro is defined to convert a floating point
- * number to a string without a trailing decimal point. This
- * emulates the behavior of sprintf("%g"), but is sometimes much more
- * efficient. If gconvert() is not available, but gcvt() drops the
- * trailing decimal point, then gcvt() is used. If all else fails,
- * a macro using sprintf("%g") is used. Arguments for the Gconvert
- * macro are: value, number of digits, whether trailing zeros should
- * be retained, and the output buffer.
- * The usual values are:
- * d_Gconvert='gconvert((x),(n),(t),(b))'
- * d_Gconvert='gcvt((x),(n),(b))'
- * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
- * The last two assume trailing zeros should not be kept.
+/* Groups_t:
+ * This symbol holds the type used for the second argument to
+ * getgroups() and setgroups(). Usually, this is the same as
+ * gidtype (gid_t) , but sometimes it isn't.
+ * It can be int, ushort, gid_t, etc...
+ * It may be necessary to include <sys/types.h> to get any
+ * typedef'ed information. This is only required if you have
+ * getgroups() or setgroups()..
*/
-#define Gconvert(x,n,t,b) gcvt((x),(n),(b))
+#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
+#define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */
+#endif
-/* HAS_GETCWD:
- * This symbol, if defined, indicates that the getcwd routine is
- * available to get the current working directory.
+/* I_GRP:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <grp.h>.
*/
-#define HAS_GETCWD /**/
-
-/* HAS_GETESPWNAM:
- * This symbol, if defined, indicates that the getespwnam system call is
- * available to retrieve enchanced (shadow) password entries by name.
+/* GRPASSWD:
+ * This symbol, if defined, indicates to the C program that struct group
+ * in <grp.h> contains gr_passwd.
*/
-/*#define HAS_GETESPWNAM / **/
+#define I_GRP /**/
+#define GRPASSWD /**/
-/* HAS_GETFSSTAT:
- * This symbol, if defined, indicates that the getfsstat routine is
- * available to stat filesystems in bulk.
+/* I_NDBM:
+ * This symbol, if defined, indicates that <ndbm.h> exists and should
+ * be included.
*/
-/*#define HAS_GETFSSTAT / **/
+#define I_NDBM /**/
-/* HAS_GETGRENT:
- * This symbol, if defined, indicates that the getgrent routine is
- * available for sequential access of the group database.
+/* I_NETDB:
+ * This symbol, if defined, indicates that <netdb.h> exists and
+ * should be included.
*/
-#define HAS_GETGRENT /**/
+#define I_NETDB /**/
-/* HAS_GETGRENT_R:
- * This symbol, if defined, indicates that the getgrent_r routine
- * is available to getgrent re-entrantly.
+/* I_PWD:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <pwd.h>.
*/
-/* GETGRENT_R_PROTO:
- * This symbol encodes the prototype of getgrent_r.
- * It is zero if d_getgrent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrent_r
- * is defined.
+/* PWQUOTA:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_quota.
*/
-/*#define HAS_GETGRENT_R / **/
-#define GETGRENT_R_PROTO 0 /**/
-
-/* HAS_GETGRGID_R:
- * This symbol, if defined, indicates that the getgrgid_r routine
- * is available to getgrgid re-entrantly.
+/* PWAGE:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_age.
*/
-/* GETGRGID_R_PROTO:
- * This symbol encodes the prototype of getgrgid_r.
- * It is zero if d_getgrgid_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrgid_r
- * is defined.
+/* PWCHANGE:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_change.
*/
-/*#define HAS_GETGRGID_R / **/
-#define GETGRGID_R_PROTO 0 /**/
+/* PWCLASS:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_class.
+ */
+/* PWEXPIRE:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_expire.
+ */
+/* PWCOMMENT:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_comment.
+ */
+/* PWGECOS:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_gecos.
+ */
+/* PWPASSWD:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_passwd.
+ */
+#define I_PWD /**/
+#define PWQUOTA /**/
+/*#define PWAGE / **/
+/*#define PWCHANGE / **/
+/*#define PWCLASS / **/
+/*#define PWEXPIRE / **/
+#define PWCOMMENT /**/
+#define PWGECOS /**/
+#define PWPASSWD /**/
-/* HAS_GETGRNAM_R:
- * This symbol, if defined, indicates that the getgrnam_r routine
- * is available to getgrnam re-entrantly.
+/* I_SYSUIO:
+ * This symbol, if defined, indicates that <sys/uio.h> exists and
+ * should be included.
*/
-/* GETGRNAM_R_PROTO:
- * This symbol encodes the prototype of getgrnam_r.
- * It is zero if d_getgrnam_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrnam_r
- * is defined.
+#define I_SYSUIO /**/
+
+/* I_STDARG:
+ * This symbol, if defined, indicates that <stdarg.h> exists and should
+ * be included.
*/
-/*#define HAS_GETGRNAM_R / **/
-#define GETGRNAM_R_PROTO 0 /**/
+/* I_VARARGS:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <varargs.h>.
+ */
+#define I_STDARG /**/
+/*#define I_VARARGS / **/
-/* HAS_GETHOSTBYADDR:
- * This symbol, if defined, indicates that the gethostbyaddr() routine is
- * available to look up hosts by their IP addresses.
+/* Free_t:
+ * This variable contains the return type of free(). It is usually
+ * void, but occasionally int.
*/
-#define HAS_GETHOSTBYADDR /**/
+/* Malloc_t:
+ * This symbol is the type of pointer returned by malloc and realloc.
+ */
+#define Malloc_t void * /**/
+#define Free_t void /**/
-/* HAS_GETHOSTBYNAME:
- * This symbol, if defined, indicates that the gethostbyname() routine is
- * available to look up host names in some data base or other.
+/* MYMALLOC:
+ * This symbol, if defined, indicates that we're using our own malloc.
*/
-#define HAS_GETHOSTBYNAME /**/
+/*#define MYMALLOC / **/
-/* HAS_GETHOSTENT:
- * This symbol, if defined, indicates that the gethostent() routine is
- * available to look up host names in some data base or another.
+/* CAN_PROTOTYPE:
+ * If defined, this macro indicates that the C compiler can handle
+ * function prototypes.
*/
-#define HAS_GETHOSTENT /**/
+/* _:
+ * This macro is used to declare function parameters for folks who want
+ * to make declarations with prototypes using a different style than
+ * the above macros. Use double parentheses. For example:
+ *
+ * int main _((int argc, char *argv[]));
+ */
+#define CAN_PROTOTYPE /**/
+#ifdef CAN_PROTOTYPE
+#define _(args) args
+#else
+#define _(args) ()
+#endif
-/* HAS_GETHOSTNAME:
- * This symbol, if defined, indicates that the C program may use the
- * gethostname() routine to derive the host name. See also HAS_UNAME
- * and PHOSTNAME.
+/* SH_PATH:
+ * This symbol contains the full pathname to the shell used on this
+ * on this system to execute Bourne shell scripts. Usually, this will be
+ * /bin/sh, though it's possible that some systems will have /bin/ksh,
+ * /bin/pdksh, /bin/ash, /bin/bash, or even something such as
+ * D:/bin/sh.exe.
*/
-/* HAS_UNAME:
- * This symbol, if defined, indicates that the C program may use the
- * uname() routine to derive the host name. See also HAS_GETHOSTNAME
- * and PHOSTNAME.
+#define SH_PATH "/bin/sh" /**/
+
+/* SIG_NAME:
+ * This symbol contains a list of signal names in order of
+ * signal number. This is intended
+ * to be used as a static array initialization, like this:
+ * char *sig_name[] = { SIG_NAME };
+ * The signals in the list are separated with commas, and each signal
+ * is surrounded by double quotes. There is no leading SIG in the signal
+ * name, i.e. SIGQUIT is known as "QUIT".
+ * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
+ * etc., where nn is the actual signal number (e.g. NUM37).
+ * The signal number for sig_name[i] is stored in sig_num[i].
+ * The last element is 0 to terminate the list with a NULL. This
+ * corresponds to the 0 at the end of the sig_num list.
*/
-/* PHOSTNAME:
- * This symbol, if defined, indicates the command to feed to the
- * popen() routine to derive the host name. See also HAS_GETHOSTNAME
- * and HAS_UNAME. Note that the command uses a fully qualified path,
- * so that it is safe even if used by a process with super-user
- * privileges.
+/* SIG_NUM:
+ * This symbol contains a list of signal numbers, in the same order as the
+ * SIG_NAME list. It is suitable for static array initialization, as in:
+ * int sig_num[] = { SIG_NUM };
+ * The signals in the list are separated with commas, and the indices
+ * within that list and the SIG_NAME list match, so it's easy to compute
+ * the signal name from a number or vice versa at the price of a small
+ * dynamic linear lookup.
+ * Duplicates are allowed, but are moved to the end of the list.
+ * The signal number corresponding to sig_name[i] is sig_number[i].
+ * if (i < NSIG) then sig_number[i] == i.
+ * The last element is 0, corresponding to the 0 at the end of
+ * the sig_name list.
*/
-/* HAS_PHOSTNAME:
- * This symbol, if defined, indicates that the C program may use the
- * contents of PHOSTNAME as a command to feed to the popen() routine
- * to derive the host name.
+/* SIG_SIZE:
+ * This variable contains the number of elements of the sig_name
+ * and sig_num arrays, excluding the final NULL entry.
*/
-#define HAS_GETHOSTNAME /**/
-#define HAS_UNAME /**/
-/*#define HAS_PHOSTNAME / **/
-#ifdef HAS_PHOSTNAME
-#define PHOSTNAME "" /* How to get the host name */
-#endif
+#define SIG_NAME "ZERO", "HUP", "INT", "QUIT", "ILL", "TRAP", "ABRT", "EMT", "FPE", "KILL", "BUS", "SEGV", "SYS", "PIPE", "ALRM", "TERM", "IOINT", "STOP", "TSTP", "CONT", "CHLD", "TTIN", "TTOU", "AIO", "XCPU", "XFSZ", "VTALRM", "PROF", "WINCH", "INFO", "USR1", "USR2", "RESV", "RTMIN", "NUM34", "NUM35", "NUM36", "NUM37", "NUM38", "NUM39", "NUM40", "NUM41", "NUM42", "NUM43", "NUM44", "NUM45", "NUM46", "NUM47", "MAX", "IOT", "LOST", "URG", "CLD", "IO", "POLL", "PTY", "PWR", "RTMAX", 0 /**/
+#define SIG_NUM 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 6, 6, 16, 20, 23, 23, 23, 29, 48, 0 /**/
+#define SIG_SIZE 58 /**/
-/* HAS_GETHOST_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for gethostent(), gethostbyname(), and
- * gethostbyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+/* STDCHAR:
+ * This symbol is defined to be the type of char used in stdio.h.
+ * It has the values "unsigned char" or "char".
*/
-#define HAS_GETHOST_PROTOS /**/
+#define STDCHAR unsigned char /**/
-/* HAS_GETITIMER:
- * This symbol, if defined, indicates that the getitimer routine is
- * available to return interval timers.
+/* VOIDFLAGS:
+ * This symbol indicates how much support of the void type is given by this
+ * compiler. What various bits mean:
+ *
+ * 1 = supports declaration of void
+ * 2 = supports arrays of pointers to functions returning void
+ * 4 = supports comparisons between pointers to void functions and
+ * addresses of void functions
+ * 8 = suports declaration of generic void pointers
+ *
+ * The package designer should define VOIDUSED to indicate the requirements
+ * of the package. This can be done either by #defining VOIDUSED before
+ * including config.h, or by defining defvoidused in Myinit.U. If the
+ * latter approach is taken, only those flags will be tested. If the
+ * level of void support necessary is not present, defines void to int.
*/
-#define HAS_GETITIMER /**/
+#ifndef VOIDUSED
+#define VOIDUSED 15
+#endif
+#define VOIDFLAGS 15
+#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
+#define void int /* is void to be avoided? */
+#define M_VOID /* Xenix strikes again */
+#endif
-/* HAS_GETLOGIN_R:
- * This symbol, if defined, indicates that the getlogin_r routine
- * is available to getlogin re-entrantly.
+/* USE_CROSS_COMPILE:
+ * This symbol, if defined, indicates that Perl is being cross-compiled.
*/
-/* GETLOGIN_R_PROTO:
- * This symbol encodes the prototype of getlogin_r.
- * It is zero if d_getlogin_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getlogin_r
- * is defined.
+/* PERL_TARGETARCH:
+ * This symbol, if defined, indicates the target architecture
+ * Perl has been cross-compiled to. Undefined if not a cross-compile.
*/
-/*#define HAS_GETLOGIN_R / **/
-#define GETLOGIN_R_PROTO 0 /**/
+#ifndef USE_CROSS_COMPILE
+/*#define USE_CROSS_COMPILE / **/
+#define PERL_TARGETARCH "" /**/
+#endif
-/* HAS_GETMNT:
- * This symbol, if defined, indicates that the getmnt routine is
- * available to get filesystem mount info by filename.
+/* HAS_ATOLF:
+ * This symbol, if defined, indicates that the atolf routine is
+ * available to convert strings into long doubles.
*/
-/*#define HAS_GETMNT / **/
+/*#define HAS_ATOLF / **/
-/* HAS_GETMNTENT:
- * This symbol, if defined, indicates that the getmntent routine is
- * available to iterate through mounted file systems to get their info.
+/* HAS_ATOLL:
+ * This symbol, if defined, indicates that the atoll routine is
+ * available to convert strings into long longs.
*/
-#define HAS_GETMNTENT /**/
+/*#define HAS_ATOLL / **/
-/* HAS_GETNETBYADDR:
- * This symbol, if defined, indicates that the getnetbyaddr() routine is
- * available to look up networks by their IP addresses.
+/* HAS__FWALK:
+ * This symbol, if defined, indicates that the _fwalk system call is
+ * available to apply a function to all the file handles.
*/
-#define HAS_GETNETBYADDR /**/
+/*#define HAS__FWALK / **/
-/* HAS_GETNETBYNAME:
- * This symbol, if defined, indicates that the getnetbyname() routine is
- * available to look up networks by their names.
+/* HAS_CLASS:
+ * This symbol, if defined, indicates that the class routine is
+ * available to classify doubles. Available for example in AIX.
+ * The returned values are defined in <float.h> and are:
+ *
+ * FP_PLUS_NORM Positive normalized, nonzero
+ * FP_MINUS_NORM Negative normalized, nonzero
+ * FP_PLUS_DENORM Positive denormalized, nonzero
+ * FP_MINUS_DENORM Negative denormalized, nonzero
+ * FP_PLUS_ZERO +0.0
+ * FP_MINUS_ZERO -0.0
+ * FP_PLUS_INF +INF
+ * FP_MINUS_INF -INF
+ * FP_NANS Signaling Not a Number (NaNS)
+ * FP_NANQ Quiet Not a Number (NaNQ)
*/
-#define HAS_GETNETBYNAME /**/
+/*#define HAS_CLASS / **/
-/* HAS_GETNETENT:
- * This symbol, if defined, indicates that the getnetent() routine is
- * available to look up network names in some data base or another.
+/* HAS_STRUCT_CMSGHDR:
+ * This symbol, if defined, indicates that the struct cmsghdr
+ * is supported.
*/
-#define HAS_GETNETENT /**/
+#define HAS_STRUCT_CMSGHDR /**/
-/* HAS_GETNET_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for getnetent(), getnetbyname(), and
- * getnetbyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+/* HAS_DBMINIT_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the dbminit() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern int dbminit(char *);
*/
-#define HAS_GETNET_PROTOS /**/
+/*#define HAS_DBMINIT_PROTO / **/
-/* HAS_GETPAGESIZE:
- * This symbol, if defined, indicates that the getpagesize system call
- * is available to get system page size, which is the granularity of
- * many memory management calls.
+/* HAS_DIRFD:
+ * This manifest constant lets the C program know that dirfd
+ * is available.
*/
-#define HAS_GETPAGESIZE /**/
+#define HAS_DIRFD /**/
-/* HAS_GETPROTOENT:
- * This symbol, if defined, indicates that the getprotoent() routine is
- * available to look up protocols in some data base or another.
+/* DLSYM_NEEDS_UNDERSCORE:
+ * This symbol, if defined, indicates that we need to prepend an
+ * underscore to the symbol name before calling dlsym(). This only
+ * makes sense if you *have* dlsym, which we will presume is the
+ * case if you're using dl_dlopen.xs.
*/
-#define HAS_GETPROTOENT /**/
+/*#define DLSYM_NEEDS_UNDERSCORE / **/
-/* HAS_GETPGRP:
- * This symbol, if defined, indicates that the getpgrp routine is
- * available to get the current process group.
+/* HAS_FCHDIR:
+ * This symbol, if defined, indicates that the fchdir routine is
+ * available to change directory using a file descriptor.
*/
-/* USE_BSD_GETPGRP:
- * This symbol, if defined, indicates that getpgrp needs one
- * arguments whereas USG one needs none.
+#define HAS_FCHDIR /**/
+
+/* FCNTL_CAN_LOCK:
+ * This symbol, if defined, indicates that fcntl() can be used
+ * for file locking. Normally on Unix systems this is defined.
+ * It may be undefined on VMS.
*/
-#define HAS_GETPGRP /**/
-/*#define USE_BSD_GETPGRP / **/
+#define FCNTL_CAN_LOCK /**/
-/* HAS_GETPROTOBYNAME:
- * This symbol, if defined, indicates that the getprotobyname()
- * routine is available to look up protocols by their name.
+/* HAS_FINITE:
+ * This symbol, if defined, indicates that the finite routine is
+ * available to check whether a double is finite (non-infinity non-NaN).
*/
-/* HAS_GETPROTOBYNUMBER:
- * This symbol, if defined, indicates that the getprotobynumber()
- * routine is available to look up protocols by their number.
+#define HAS_FINITE /**/
+
+/* HAS_FINITEL:
+ * This symbol, if defined, indicates that the finitel routine is
+ * available to check whether a long double is finite
+ * (non-infinity non-NaN).
*/
-#define HAS_GETPROTOBYNAME /**/
-#define HAS_GETPROTOBYNUMBER /**/
+#define HAS_FINITEL /**/
-/* HAS_GETPROTO_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for getprotoent(), getprotobyname(), and
- * getprotobyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+/* HAS_FLOCK_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the flock() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern int flock(int, int);
*/
-#define HAS_GETPROTO_PROTOS /**/
+/*#define HAS_FLOCK_PROTO / **/
-/* HAS_GETPRPWNAM:
- * This symbol, if defined, indicates that the getprpwnam system call is
- * available to retrieve protected (shadow) password entries by name.
+/* HAS_FP_CLASS:
+ * This symbol, if defined, indicates that the fp_class routine is
+ * available to classify doubles. Available for example in Digital UNIX.
+ * The returned values are defined in <math.h> and are:
+ *
+ * FP_SNAN Signaling NaN (Not-a-Number)
+ * FP_QNAN Quiet NaN (Not-a-Number)
+ * FP_POS_INF +infinity
+ * FP_NEG_INF -infinity
+ * FP_POS_NORM Positive normalized
+ * FP_NEG_NORM Negative normalized
+ * FP_POS_DENORM Positive denormalized
+ * FP_NEG_DENORM Negative denormalized
+ * FP_POS_ZERO +0.0 (positive zero)
+ * FP_NEG_ZERO -0.0 (negative zero)
*/
-#define HAS_GETPRPWNAM /**/
+#define HAS_FP_CLASS /**/
-/* HAS_GETPWENT:
- * This symbol, if defined, indicates that the getpwent routine is
- * available for sequential access of the passwd database.
- * If this is not available, the older getpw() function may be available.
+/* HAS_FPCLASS:
+ * This symbol, if defined, indicates that the fpclass routine is
+ * available to classify doubles. Available for example in Solaris/SVR4.
+ * The returned values are defined in <ieeefp.h> and are:
+ *
+ * FP_SNAN signaling NaN
+ * FP_QNAN quiet NaN
+ * FP_NINF negative infinity
+ * FP_PINF positive infinity
+ * FP_NDENORM negative denormalized non-zero
+ * FP_PDENORM positive denormalized non-zero
+ * FP_NZERO negative zero
+ * FP_PZERO positive zero
+ * FP_NNORM negative normalized non-zero
+ * FP_PNORM positive normalized non-zero
*/
-#define HAS_GETPWENT /**/
+/*#define HAS_FPCLASS / **/
-/* HAS_GETPWENT_R:
- * This symbol, if defined, indicates that the getpwent_r routine
- * is available to getpwent re-entrantly.
+/* HAS_FPCLASSIFY:
+ * This symbol, if defined, indicates that the fpclassify routine is
+ * available to classify doubles. Available for example in HP-UX.
+ * The returned values are defined in <math.h> and are
+ *
+ * FP_NORMAL Normalized
+ * FP_ZERO Zero
+ * FP_INFINITE Infinity
+ * FP_SUBNORMAL Denormalized
+ * FP_NAN NaN
+ *
*/
-/* GETPWENT_R_PROTO:
- * This symbol encodes the prototype of getpwent_r.
- * It is zero if d_getpwent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwent_r
- * is defined.
+/*#define HAS_FPCLASSIFY / **/
+
+/* HAS_FPCLASSL:
+ * This symbol, if defined, indicates that the fpclassl routine is
+ * available to classify long doubles. Available for example in IRIX.
+ * The returned values are defined in <ieeefp.h> and are:
+ *
+ * FP_SNAN signaling NaN
+ * FP_QNAN quiet NaN
+ * FP_NINF negative infinity
+ * FP_PINF positive infinity
+ * FP_NDENORM negative denormalized non-zero
+ * FP_PDENORM positive denormalized non-zero
+ * FP_NZERO negative zero
+ * FP_PZERO positive zero
+ * FP_NNORM negative normalized non-zero
+ * FP_PNORM positive normalized non-zero
*/
-/*#define HAS_GETPWENT_R / **/
-#define GETPWENT_R_PROTO 0 /**/
+/*#define HAS_FPCLASSL / **/
-/* HAS_GETPWNAM_R:
- * This symbol, if defined, indicates that the getpwnam_r routine
- * is available to getpwnam re-entrantly.
+/* HAS_FPOS64_T:
+ * This symbol will be defined if the C compiler supports fpos64_t.
*/
-/* GETPWNAM_R_PROTO:
- * This symbol encodes the prototype of getpwnam_r.
- * It is zero if d_getpwnam_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwnam_r
- * is defined.
+/*#define HAS_FPOS64_T / **/
+
+/* HAS_FREXPL:
+ * This symbol, if defined, indicates that the frexpl routine is
+ * available to break a long double floating-point number into
+ * a normalized fraction and an integral power of 2.
*/
-/*#define HAS_GETPWNAM_R / **/
-#define GETPWNAM_R_PROTO 0 /**/
+#define HAS_FREXPL /**/
-/* HAS_GETPWUID_R:
- * This symbol, if defined, indicates that the getpwuid_r routine
- * is available to getpwuid re-entrantly.
+/* HAS_STRUCT_FS_DATA:
+ * This symbol, if defined, indicates that the struct fs_data
+ * to do statfs() is supported.
*/
-/* GETPWUID_R_PROTO:
- * This symbol encodes the prototype of getpwuid_r.
- * It is zero if d_getpwuid_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwuid_r
- * is defined.
+/*#define HAS_STRUCT_FS_DATA / **/
+
+/* HAS_FSEEKO:
+ * This symbol, if defined, indicates that the fseeko routine is
+ * available to fseek beyond 32 bits (useful for ILP32 hosts).
*/
-/*#define HAS_GETPWUID_R / **/
-#define GETPWUID_R_PROTO 0 /**/
+/*#define HAS_FSEEKO / **/
-/* HAS_GETSERVENT:
- * This symbol, if defined, indicates that the getservent() routine is
- * available to look up network services in some data base or another.
+/* HAS_FSTATFS:
+ * This symbol, if defined, indicates that the fstatfs routine is
+ * available to stat filesystems by file descriptors.
*/
-#define HAS_GETSERVENT /**/
+#define HAS_FSTATFS /**/
-/* HAS_GETSERV_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for getservent(), getservbyname(), and
- * getservbyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+/* HAS_FSYNC:
+ * This symbol, if defined, indicates that the fsync routine is
+ * available to write a file's modified data and attributes to
+ * permanent storage.
*/
-#define HAS_GETSERV_PROTOS /**/
+#define HAS_FSYNC /**/
-/* HAS_GETSPNAM:
- * This symbol, if defined, indicates that the getspnam system call is
- * available to retrieve SysV shadow password entries by name.
+/* HAS_FTELLO:
+ * This symbol, if defined, indicates that the ftello routine is
+ * available to ftell beyond 32 bits (useful for ILP32 hosts).
*/
-#define HAS_GETSPNAM /**/
+/*#define HAS_FTELLO / **/
-/* HAS_GETSPNAM_R:
- * This symbol, if defined, indicates that the getspnam_r routine
- * is available to getspnam re-entrantly.
+/* HAS_GETCWD:
+ * This symbol, if defined, indicates that the getcwd routine is
+ * available to get the current working directory.
*/
-/* GETSPNAM_R_PROTO:
- * This symbol encodes the prototype of getspnam_r.
- * It is zero if d_getspnam_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getspnam_r
- * is defined.
+#define HAS_GETCWD /**/
+
+/* HAS_GETESPWNAM:
+ * This symbol, if defined, indicates that the getespwnam system call is
+ * available to retrieve enchanced (shadow) password entries by name.
*/
-/*#define HAS_GETSPNAM_R / **/
-#define GETSPNAM_R_PROTO 0 /**/
+/*#define HAS_GETESPWNAM / **/
-/* HAS_GETSERVBYNAME:
- * This symbol, if defined, indicates that the getservbyname()
- * routine is available to look up services by their name.
+/* HAS_GETFSSTAT:
+ * This symbol, if defined, indicates that the getfsstat routine is
+ * available to stat filesystems in bulk.
*/
-/* HAS_GETSERVBYPORT:
- * This symbol, if defined, indicates that the getservbyport()
- * routine is available to look up services by their port.
+#define HAS_GETFSSTAT /**/
+
+/* HAS_GETITIMER:
+ * This symbol, if defined, indicates that the getitimer routine is
+ * available to return interval timers.
*/
-#define HAS_GETSERVBYNAME /**/
-#define HAS_GETSERVBYPORT /**/
+#define HAS_GETITIMER /**/
-/* HAS_GMTIME_R:
- * This symbol, if defined, indicates that the gmtime_r routine
- * is available to gmtime re-entrantly.
+/* HAS_GETMNT:
+ * This symbol, if defined, indicates that the getmnt routine is
+ * available to get filesystem mount info by filename.
*/
-/* GMTIME_R_PROTO:
- * This symbol encodes the prototype of gmtime_r.
- * It is zero if d_gmtime_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gmtime_r
- * is defined.
+/*#define HAS_GETMNT / **/
+
+/* HAS_GETMNTENT:
+ * This symbol, if defined, indicates that the getmntent routine is
+ * available to iterate through mounted file systems to get their info.
*/
-/*#define HAS_GMTIME_R / **/
-#define GMTIME_R_PROTO 0 /**/
+/*#define HAS_GETMNTENT / **/
-/* HAS_GNULIBC:
- * This symbol, if defined, indicates to the C program that
- * the GNU C library is being used. A better check is to use
- * the __GLIBC__ and __GLIBC_MINOR__ symbols supplied with glibc.
+/* HAS_GETPRPWNAM:
+ * This symbol, if defined, indicates that the getprpwnam system call is
+ * available to retrieve protected (shadow) password entries by name.
*/
-/*#define HAS_GNULIBC / **/
-#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
-# define _GNU_SOURCE
-#endif
+/*#define HAS_GETPRPWNAM / **/
+
+/* HAS_GETSPNAM:
+ * This symbol, if defined, indicates that the getspnam system call is
+ * available to retrieve SysV shadow password entries by name.
+ */
+/*#define HAS_GETSPNAM / **/
+
/* HAS_HASMNTOPT:
* This symbol, if defined, indicates that the hasmntopt routine is
* available to query the mount options of file systems.
*/
-#define HAS_HASMNTOPT /**/
-
-/* HAS_HTONL:
- * This symbol, if defined, indicates that the htonl() routine (and
- * friends htons() ntohl() ntohs()) are available to do network
- * order byte swapping.
- */
-/* HAS_HTONS:
- * This symbol, if defined, indicates that the htons() routine (and
- * friends htonl() ntohl() ntohs()) are available to do network
- * order byte swapping.
- */
-/* HAS_NTOHL:
- * This symbol, if defined, indicates that the ntohl() routine (and
- * friends htonl() htons() ntohs()) are available to do network
- * order byte swapping.
- */
-/* HAS_NTOHS:
- * This symbol, if defined, indicates that the ntohs() routine (and
- * friends htonl() htons() ntohl()) are available to do network
- * order byte swapping.
- */
-#define HAS_HTONL /**/
-#define HAS_HTONS /**/
-#define HAS_NTOHL /**/
-#define HAS_NTOHS /**/
+/*#define HAS_HASMNTOPT / **/
/* HAS_INT64_T:
* This symbol will defined if the C compiler supports int64_t.
*/
#define HAS_INT64_T /**/
-/* HAS_ISASCII:
- * This manifest constant lets the C program know that isascii
- * is available.
- */
-#define HAS_ISASCII /**/
-
/* HAS_ISFINITE:
* This symbol, if defined, indicates that the isfinite routine is
* available to check whether a double is finite (non-infinity non-NaN).
*/
-#define HAS_ISFINITE /**/
+/*#define HAS_ISFINITE / **/
/* HAS_ISINF:
* This symbol, if defined, indicates that the isinf routine is
* available to check whether a double is an infinity.
*/
-#define HAS_ISINF /**/
+/*#define HAS_ISINF / **/
/* HAS_ISNAN:
* This symbol, if defined, indicates that the isnan routine is
* This symbol, if defined, indicates that the isnanl routine is
* available to check whether a long double is a NaN.
*/
-/*#define HAS_ISNANL / **/
-
-/* HAS_LCHOWN:
- * This symbol, if defined, indicates that the lchown routine is
- * available to operate on a symbolic link (instead of following the
- * link).
- */
-#define HAS_LCHOWN /**/
+#define HAS_ISNANL /**/
/* HAS_LDBL_DIG:
* This symbol, if defined, indicates that this system's <float.h>
*/
#define HAS_LDBL_DIG /* */
-/* HAS_LOCALTIME_R:
- * This symbol, if defined, indicates that the localtime_r routine
- * is available to localtime re-entrantly.
- */
-/* LOCALTIME_R_PROTO:
- * This symbol encodes the prototype of localtime_r.
- * It is zero if d_localtime_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_localtime_r
- * is defined.
- */
-/*#define HAS_LOCALTIME_R / **/
-#define LOCALTIME_R_PROTO 0 /**/
-
-/* HAS_LONG_DOUBLE:
- * This symbol will be defined if the C compiler supports long
- * doubles.
- */
-/* LONG_DOUBLESIZE:
- * This symbol contains the size of a long double, so that the
- * C preprocessor can make decisions based on it. It is only
- * defined if the system supports long doubles.
- */
-#define HAS_LONG_DOUBLE /**/
-#ifdef HAS_LONG_DOUBLE
-#define LONG_DOUBLESIZE 16 /**/
-#endif
-
-/* HAS_LONG_LONG:
- * This symbol will be defined if the C compiler supports long long.
- */
-/* LONGLONGSIZE:
- * This symbol contains the size of a long long, so that the
- * C preprocessor can make decisions based on it. It is only
- * defined if the system supports long long.
- */
-#define HAS_LONG_LONG /**/
-#ifdef HAS_LONG_LONG
-#define LONGLONGSIZE 8 /**/
-#endif
-
-/* HAS_LSEEK_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the lseek() function. Otherwise, it is up
- * to the program to supply one. A good guess is
- * extern off_t lseek(int, off_t, int);
- */
-#define HAS_LSEEK_PROTO /**/
-
/* HAS_MADVISE:
* This symbol, if defined, indicates that the madvise system call is
* available to map a file into memory.
*/
#define HAS_MADVISE /**/
-/* HAS_MEMCHR:
- * This symbol, if defined, indicates that the memchr routine is available
- * to locate characters within a C string.
- */
-#define HAS_MEMCHR /**/
-
/* HAS_MKDTEMP:
* This symbol, if defined, indicates that the mkdtemp routine is
* available to exclusively create a uniquely named temporary directory.
*/
/*#define HAS_MKDTEMP / **/
-/* HAS_MKSTEMP:
- * This symbol, if defined, indicates that the mkstemp routine is
- * available to exclusively create and open a uniquely named
- * temporary file.
- */
-#define HAS_MKSTEMP /**/
-
/* HAS_MKSTEMPS:
* This symbol, if defined, indicates that the mkstemps routine is
* available to excluslvely create and open a uniquely named
*/
/*#define HAS_MKSTEMPS / **/
-/* HAS_MMAP:
- * This symbol, if defined, indicates that the mmap system call is
- * available to map a file into memory.
- */
-/* Mmap_t:
- * This symbol holds the return type of the mmap() system call
- * (and simultaneously the type of the first argument).
- * Usually set to 'void *' or 'cadd_t'.
- */
-#define HAS_MMAP /**/
-#define Mmap_t void * /**/
-
/* HAS_MODFL:
* This symbol, if defined, indicates that the modfl routine is
* available to split a long double x into a fractional part f and
* available to modify the access protection of a memory mapped file.
*/
#define HAS_MPROTECT /**/
-
-/* HAS_MSG:
- * This symbol, if defined, indicates that the entire msg*(2) library is
- * supported (IPC mechanism based on message queues).
- */
-#define HAS_MSG /**/
-
-/* HAS_STRUCT_MSGHDR:
- * This symbol, if defined, indicates that the struct msghdr
- * is supported.
- */
-#define HAS_STRUCT_MSGHDR /**/
-
-/* HAS_NANOSLEEP:
- * This symbol, if defined, indicates that the nanosleep
- * system call is available to sleep with 1E-9 sec accuracy.
- */
-#define HAS_NANOSLEEP /**/
-
-/* HAS_OFF64_T:
- * This symbol will be defined if the C compiler supports off64_t.
- */
-#define HAS_OFF64_T /**/
-
-/* HAS_OPEN3:
- * This manifest constant lets the C program know that the three
- * argument form of open(2) is available.
- */
-#define HAS_OPEN3 /**/
-
-/* OLD_PTHREAD_CREATE_JOINABLE:
- * This symbol, if defined, indicates how to create pthread
- * in joinable (aka undetached) state. NOTE: not defined
- * if pthread.h already has defined PTHREAD_CREATE_JOINABLE
- * (the new version of the constant).
- * If defined, known values are PTHREAD_CREATE_UNDETACHED
- * and __UNDETACHED.
- */
-/*#define OLD_PTHREAD_CREATE_JOINABLE / **/
-
-/* HAS_PTHREAD_YIELD:
- * This symbol, if defined, indicates that the pthread_yield
- * routine is available to yield the execution of the current
- * thread. sched_yield is preferable to pthread_yield.
- */
-/* SCHED_YIELD:
- * This symbol defines the way to yield the execution of
- * the current thread. Known ways are sched_yield,
- * pthread_yield, and pthread_yield with NULL.
+
+/* HAS_STRUCT_MSGHDR:
+ * This symbol, if defined, indicates that the struct msghdr
+ * is supported.
*/
-/* HAS_SCHED_YIELD:
- * This symbol, if defined, indicates that the sched_yield
- * routine is available to yield the execution of the current
- * thread. sched_yield is preferable to pthread_yield.
+#define HAS_STRUCT_MSGHDR /**/
+
+/* HAS_NANOSLEEP:
+ * This symbol, if defined, indicates that the nanosleep
+ * system call is available to sleep with 1E-9 sec accuracy.
*/
-/*#define HAS_PTHREAD_YIELD / **/
-#define SCHED_YIELD sched_yield() /**/
-#define HAS_SCHED_YIELD /**/
+#define HAS_NANOSLEEP /**/
-/* HAS_RANDOM_R:
- * This symbol, if defined, indicates that the random_r routine
- * is available to random re-entrantly.
+/* HAS_NL_LANGINFO:
+ * This symbol, if defined, indicates that the nl_langinfo routine is
+ * available to return local data. You will also need <langinfo.h>
+ * and therefore I_LANGINFO.
*/
-/* RANDOM_R_PROTO:
- * This symbol encodes the prototype of random_r.
- * It is zero if d_random_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_random_r
- * is defined.
+#define HAS_NL_LANGINFO /**/
+
+/* HAS_OFF64_T:
+ * This symbol will be defined if the C compiler supports off64_t.
*/
-/*#define HAS_RANDOM_R / **/
-#define RANDOM_R_PROTO 0 /**/
+/*#define HAS_OFF64_T / **/
-/* HAS_READDIR_R:
- * This symbol, if defined, indicates that the readdir_r routine
- * is available to readdir re-entrantly.
+/* HAS_PROCSELFEXE:
+ * This symbol is defined if PROCSELFEXE_PATH is a symlink
+ * to the absolute pathname of the executing program.
*/
-/* READDIR_R_PROTO:
- * This symbol encodes the prototype of readdir_r.
- * It is zero if d_readdir_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_readdir_r
- * is defined.
+/* PROCSELFEXE_PATH:
+ * If HAS_PROCSELFEXE is defined this symbol is the filename
+ * of the symbolic link pointing to the absolute pathname of
+ * the executing program.
*/
-/*#define HAS_READDIR_R / **/
-#define READDIR_R_PROTO 0 /**/
+/*#define HAS_PROCSELFEXE / **/
+#if defined(HAS_PROCSELFEXE) && !defined(PROCSELFEXE_PATH)
+#define PROCSELFEXE_PATH /**/
+#endif
/* HAS_READV:
* This symbol, if defined, indicates that the readv routine is
*/
#define HAS_RECVMSG /**/
-/* HAS_SAFE_BCOPY:
- * This symbol, if defined, indicates that the bcopy routine is available
- * to copy potentially overlapping memory blocks. Normally, you should
- * probably use memmove() or memcpy(). If neither is defined, roll your
- * own version.
- */
-/*#define HAS_SAFE_BCOPY / **/
-
-/* HAS_SAFE_MEMCPY:
- * This symbol, if defined, indicates that the memcpy routine is available
- * to copy potentially overlapping memory blocks. If you need to
- * copy overlapping memory blocks, you should check HAS_MEMMOVE and
- * use memmove() instead, if available.
- */
-/*#define HAS_SAFE_MEMCPY / **/
-
-/* HAS_SANE_MEMCMP:
- * This symbol, if defined, indicates that the memcmp routine is available
- * and can be used to compare relative magnitudes of chars with their high
- * bits set. If it is not defined, roll your own version.
- */
-#define HAS_SANE_MEMCMP /**/
-
/* HAS_SBRK_PROTO:
* This symbol, if defined, indicates that the system provides
* a prototype for the sbrk() function. Otherwise, it is up
*/
#define HAS_SBRK_PROTO /**/
-/* HAS_SEM:
- * This symbol, if defined, indicates that the entire sem*(2) library is
- * supported.
- */
-#define HAS_SEM /**/
-
/* HAS_SENDMSG:
* This symbol, if defined, indicates that the sendmsg routine is
* available to send structured socket messages.
*/
#define HAS_SENDMSG /**/
-/* HAS_SETGRENT:
- * This symbol, if defined, indicates that the setgrent routine is
- * available for initializing sequential access of the group database.
- */
-#define HAS_SETGRENT /**/
-
-/* HAS_SETGRENT_R:
- * This symbol, if defined, indicates that the setgrent_r routine
- * is available to setgrent re-entrantly.
- */
-/* SETGRENT_R_PROTO:
- * This symbol encodes the prototype of setgrent_r.
- * It is zero if d_setgrent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setgrent_r
- * is defined.
- */
-/*#define HAS_SETGRENT_R / **/
-#define SETGRENT_R_PROTO 0 /**/
-
-/* HAS_SETGROUPS:
- * This symbol, if defined, indicates that the setgroups() routine is
- * available to set the list of process groups. If unavailable, multiple
- * groups are probably not supported.
- */
-#define HAS_SETGROUPS /**/
-
-/* HAS_SETHOSTENT:
- * This symbol, if defined, indicates that the sethostent() routine is
- * available.
- */
-#define HAS_SETHOSTENT /**/
-
/* HAS_SETITIMER:
* This symbol, if defined, indicates that the setitimer routine is
* available to set interval timers.
*/
#define HAS_SETITIMER /**/
-/* HAS_SETNETENT:
- * This symbol, if defined, indicates that the setnetent() routine is
- * available.
- */
-#define HAS_SETNETENT /**/
-
-/* HAS_SETPROTOENT:
- * This symbol, if defined, indicates that the setprotoent() routine is
- * available.
- */
-#define HAS_SETPROTOENT /**/
-
-/* HAS_SETPGRP:
- * This symbol, if defined, indicates that the setpgrp routine is
- * available to set the current process group.
- */
-/* USE_BSD_SETPGRP:
- * This symbol, if defined, indicates that setpgrp needs two
- * arguments whereas USG one needs none. See also HAS_SETPGID
- * for a POSIX interface.
- */
-#define HAS_SETPGRP /**/
-/*#define USE_BSD_SETPGRP / **/
-
/* HAS_SETPROCTITLE:
* This symbol, if defined, indicates that the setproctitle routine is
* available to set process title.
*/
/*#define HAS_SETPROCTITLE / **/
-/* HAS_SETPWENT:
- * This symbol, if defined, indicates that the setpwent routine is
- * available for initializing sequential access of the passwd database.
- */
-#define HAS_SETPWENT /**/
-
-/* HAS_SETPWENT_R:
- * This symbol, if defined, indicates that the setpwent_r routine
- * is available to setpwent re-entrantly.
- */
-/* SETPWENT_R_PROTO:
- * This symbol encodes the prototype of setpwent_r.
- * It is zero if d_setpwent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setpwent_r
- * is defined.
- */
-/*#define HAS_SETPWENT_R / **/
-#define SETPWENT_R_PROTO 0 /**/
-
-/* HAS_SETSERVENT:
- * This symbol, if defined, indicates that the setservent() routine is
- * available.
- */
-#define HAS_SETSERVENT /**/
-
-/* HAS_SETVBUF:
- * This symbol, if defined, indicates that the setvbuf routine is
- * available to change buffering on an open stdio stream.
- * to a line-buffered mode.
- */
-#define HAS_SETVBUF /**/
-
/* USE_SFIO:
* This symbol, if defined, indicates that sfio should
* be used.
*/
/*#define USE_SFIO / **/
-/* HAS_SHM:
- * This symbol, if defined, indicates that the entire shm*(2) library is
- * supported.
- */
-#define HAS_SHM /**/
-
-/* HAS_SIGACTION:
- * This symbol, if defined, indicates that Vr4's sigaction() routine
- * is available.
- */
-#define HAS_SIGACTION /**/
-
-/* HAS_SIGSETJMP:
- * This variable indicates to the C program that the sigsetjmp()
- * routine is available to save the calling process's registers
- * and stack environment for later use by siglongjmp(), and
- * to optionally save the process's signal mask. See
- * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
- */
-/* Sigjmp_buf:
- * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
- */
-/* Sigsetjmp:
- * This macro is used in the same way as sigsetjmp(), but will invoke
- * traditional setjmp() if sigsetjmp isn't available.
- * See HAS_SIGSETJMP.
- */
-/* Siglongjmp:
- * This macro is used in the same way as siglongjmp(), but will invoke
- * traditional longjmp() if siglongjmp isn't available.
- * See HAS_SIGSETJMP.
+/* HAS_SIGPROCMASK:
+ * This symbol, if defined, indicates that the sigprocmask
+ * system call is available to examine or change the signal mask
+ * of the calling process.
*/
-#define HAS_SIGSETJMP /**/
-#ifdef HAS_SIGSETJMP
-#define Sigjmp_buf sigjmp_buf
-#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
-#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
-#else
-#define Sigjmp_buf jmp_buf
-#define Sigsetjmp(buf,save_mask) setjmp((buf))
-#define Siglongjmp(buf,retval) longjmp((buf),(retval))
-#endif
+#define HAS_SIGPROCMASK /**/
-/* HAS_SOCKET:
- * This symbol, if defined, indicates that the BSD socket interface is
- * supported.
- */
-/* HAS_SOCKETPAIR:
- * This symbol, if defined, indicates that the BSD socketpair() call is
- * supported.
- */
-/* HAS_MSG_CTRUNC:
- * This symbol, if defined, indicates that the MSG_CTRUNC is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
-/* HAS_MSG_DONTROUTE:
- * This symbol, if defined, indicates that the MSG_DONTROUTE is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
-/* HAS_MSG_OOB:
- * This symbol, if defined, indicates that the MSG_OOB is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
-/* HAS_MSG_PEEK:
- * This symbol, if defined, indicates that the MSG_PEEK is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
-/* HAS_MSG_PROXY:
- * This symbol, if defined, indicates that the MSG_PROXY is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
-/* HAS_SCM_RIGHTS:
- * This symbol, if defined, indicates that the SCM_RIGHTS is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
+/* HAS_SOCKATMARK:
+ * This symbol, if defined, indicates that the sockatmark routine is
+ * available to test whether a socket is at the out-of-band mark.
*/
-#define HAS_SOCKET /**/
-#define HAS_SOCKETPAIR /**/
-/*#define HAS_MSG_CTRUNC / **/
-#define HAS_MSG_DONTROUTE /**/
-#define HAS_MSG_OOB /**/
-#define HAS_MSG_PEEK /**/
-/*#define HAS_MSG_PROXY / **/
-/*#define HAS_SCM_RIGHTS / **/
+#define HAS_SOCKATMARK /**/
+
+/* HAS_SOCKATMARK_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the sockatmark() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern int sockatmark(int);
+ */
+/*#define HAS_SOCKATMARK_PROTO / **/
/* HAS_SOCKS5_INIT:
* This symbol, if defined, indicates that the socks5_init routine is
* This symbol, if defined, indicates that the sqrtl routine is
* available to do long double square roots.
*/
-/*#define HAS_SQRTL / **/
+#define HAS_SQRTL /**/
-/* HAS_SRAND48_R:
- * This symbol, if defined, indicates that the srand48_r routine
- * is available to srand48 re-entrantly.
- */
-/* SRAND48_R_PROTO:
- * This symbol encodes the prototype of srand48_r.
- * It is zero if d_srand48_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_srand48_r
- * is defined.
- */
-/*#define HAS_SRAND48_R / **/
-#define SRAND48_R_PROTO 0 /**/
-
-/* HAS_SRANDOM_R:
- * This symbol, if defined, indicates that the srandom_r routine
- * is available to srandom re-entrantly.
- */
-/* SRANDOM_R_PROTO:
- * This symbol encodes the prototype of srandom_r.
- * It is zero if d_srandom_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_srandom_r
- * is defined.
+/* HAS_SETRESGID_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the setresgid() function. Otherwise, it is up
+ * to the program to supply one. Good guesses are
+ * extern int setresgid(uid_t ruid, uid_t euid, uid_t suid);
*/
-/*#define HAS_SRANDOM_R / **/
-#define SRANDOM_R_PROTO 0 /**/
+/*#define HAS_SETRESGID_PROTO / **/
-/* USE_STAT_BLOCKS:
- * This symbol is defined if this system has a stat structure declaring
- * st_blksize and st_blocks.
+/* HAS_SETRESUID_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the setresuid() function. Otherwise, it is up
+ * to the program to supply one. Good guesses are
+ * extern int setresuid(uid_t ruid, uid_t euid, uid_t suid);
*/
-#ifndef USE_STAT_BLOCKS
-#define USE_STAT_BLOCKS /**/
-#endif
+/*#define HAS_SETRESUID_PROTO / **/
/* HAS_STRUCT_STATFS_F_FLAGS:
* This symbol, if defined, indicates that the struct statfs
* have statfs() and struct statfs, they have ustat() and getmnt()
* with struct ustat and struct fs_data.
*/
-/*#define HAS_STRUCT_STATFS_F_FLAGS / **/
+#define HAS_STRUCT_STATFS_F_FLAGS /**/
/* HAS_STRUCT_STATFS:
* This symbol, if defined, indicates that the struct statfs
*/
#define HAS_FSTATVFS /**/
-/* USE_STDIO_PTR:
- * This symbol is defined if the _ptr and _cnt fields (or similar)
- * of the stdio FILE structure can be used to access the stdio buffer
- * for a file handle. If this is defined, then the FILE_ptr(fp)
- * and FILE_cnt(fp) macros will also be defined and should be used
- * to access these fields.
- */
-/* FILE_ptr:
- * This macro is used to access the _ptr field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_PTR is defined.
- */
-/* STDIO_PTR_LVALUE:
- * This symbol is defined if the FILE_ptr macro can be used as an
- * lvalue.
- */
-/* FILE_cnt:
- * This macro is used to access the _cnt field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_PTR is defined.
- */
-/* STDIO_CNT_LVALUE:
- * This symbol is defined if the FILE_cnt macro can be used as an
- * lvalue.
- */
-/* STDIO_PTR_LVAL_SETS_CNT:
- * This symbol is defined if using the FILE_ptr macro as an lvalue
- * to increase the pointer by n has the side effect of decreasing the
- * value of File_cnt(fp) by n.
- */
-/* STDIO_PTR_LVAL_NOCHANGE_CNT:
- * This symbol is defined if using the FILE_ptr macro as an lvalue
- * to increase the pointer by n leaves File_cnt(fp) unchanged.
- */
-#define USE_STDIO_PTR /**/
-#ifdef USE_STDIO_PTR
-#define FILE_ptr(fp) ((fp)->_ptr)
-#define STDIO_PTR_LVALUE /**/
-#define FILE_cnt(fp) ((fp)->_cnt)
-#define STDIO_CNT_LVALUE /**/
-/*#define STDIO_PTR_LVAL_SETS_CNT / **/
-#define STDIO_PTR_LVAL_NOCHANGE_CNT /**/
-#endif
-
-/* USE_STDIO_BASE:
- * This symbol is defined if the _base field (or similar) of the
- * stdio FILE structure can be used to access the stdio buffer for
- * a file handle. If this is defined, then the FILE_base(fp) macro
- * will also be defined and should be used to access this field.
- * Also, the FILE_bufsiz(fp) macro will be defined and should be used
- * to determine the number of bytes in the buffer. USE_STDIO_BASE
- * will never be defined unless USE_STDIO_PTR is.
- */
-/* FILE_base:
- * This macro is used to access the _base field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_BASE is defined.
- */
-/* FILE_bufsiz:
- * This macro is used to determine the number of bytes in the I/O
- * buffer pointed to by _base field (or equivalent) of the FILE
- * structure pointed to its argument. This macro will always be defined
- * if USE_STDIO_BASE is defined.
- */
-#define USE_STDIO_BASE /**/
-#ifdef USE_STDIO_BASE
-#define FILE_base(fp) ((fp)->_base)
-#define FILE_bufsiz(fp) ((fp)->_cnt + (fp)->_ptr - (fp)->_base)
-#endif
-
-/* HAS_STRERROR:
- * This symbol, if defined, indicates that the strerror routine is
- * available to translate error numbers to strings. See the writeup
- * of Strerror() in this file before you try to define your own.
- */
-/* HAS_SYS_ERRLIST:
- * This symbol, if defined, indicates that the sys_errlist array is
- * available to translate error numbers to strings. The extern int
- * sys_nerr gives the size of that table.
- */
-/* Strerror:
- * This preprocessor symbol is defined as a macro if strerror() is
- * not available to translate error numbers to strings but sys_errlist[]
- * array is there.
- */
-#define HAS_STRERROR /**/
-#define HAS_SYS_ERRLIST /**/
-#define Strerror(e) strerror(e)
-
-/* HAS_STRERROR_R:
- * This symbol, if defined, indicates that the strerror_r routine
- * is available to strerror re-entrantly.
- */
-/* STRERROR_R_PROTO:
- * This symbol encodes the prototype of strerror_r.
- * It is zero if d_strerror_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_strerror_r
- * is defined.
+/* HAS_STRFTIME:
+ * This symbol, if defined, indicates that the strftime routine is
+ * available to do time formatting.
*/
-/*#define HAS_STRERROR_R / **/
-#define STRERROR_R_PROTO 0 /**/
+#define HAS_STRFTIME /**/
/* HAS_STRTOLD:
* This symbol, if defined, indicates that the strtold routine is
* available to convert strings to long doubles.
*/
-#define HAS_STRTOLD /**/
+/*#define HAS_STRTOLD / **/
/* HAS_STRTOLL:
* This symbol, if defined, indicates that the strtoll routine is
* available to convert strings to long longs.
*/
-#define HAS_STRTOLL /**/
+/*#define HAS_STRTOLL / **/
/* HAS_STRTOQ:
* This symbol, if defined, indicates that the strtoq routine is
*/
/*#define HAS_STRTOQ / **/
-/* HAS_STRTOUL:
- * This symbol, if defined, indicates that the strtoul routine is
- * available to provide conversion of strings to unsigned long.
- */
-#define HAS_STRTOUL /**/
-
/* HAS_STRTOULL:
* This symbol, if defined, indicates that the strtoull routine is
* available to convert strings to unsigned long longs.
*/
-#define HAS_STRTOULL /**/
+/*#define HAS_STRTOULL / **/
/* HAS_STRTOUQ:
* This symbol, if defined, indicates that the strtouq routine is
*/
/*#define HAS_STRTOUQ / **/
+/* HAS_SYSCALL_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the syscall() function. Otherwise, it is up
+ * to the program to supply one. Good guesses are
+ * extern int syscall(int, ...);
+ * extern int syscall(long, ...);
+ */
+/*#define HAS_SYSCALL_PROTO / **/
+
/* HAS_TELLDIR_PROTO:
* This symbol, if defined, indicates that the system provides
* a prototype for the telldir() function. Otherwise, it is up
*/
#define HAS_TELLDIR_PROTO /**/
-/* HAS_TIME:
- * This symbol, if defined, indicates that the time() routine exists.
- */
-/* Time_t:
- * This symbol holds the type returned by time(). It can be long,
- * or time_t on BSD sites (in which case <sys/types.h> should be
- * included).
- */
-#define HAS_TIME /**/
-#define Time_t time_t /* Time type */
-
-/* HAS_TIMES:
- * This symbol, if defined, indicates that the times() routine exists.
- * Note that this became obsolete on some systems (SUNOS), which now
- * use getrusage(). It may be necessary to include <sys/times.h>.
- */
-#define HAS_TIMES /**/
-
-/* HAS_TMPNAM_R:
- * This symbol, if defined, indicates that the tmpnam_r routine
- * is available to tmpnam re-entrantly.
- */
-/* TMPNAM_R_PROTO:
- * This symbol encodes the prototype of tmpnam_r.
- * It is zero if d_tmpnam_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_tmpnam_r
- * is defined.
+/* U32_ALIGNMENT_REQUIRED:
+ * This symbol, if defined, indicates that you must access
+ * character data through U32-aligned pointers.
*/
-/*#define HAS_TMPNAM_R / **/
-#define TMPNAM_R_PROTO 0 /**/
+#ifndef U32_ALIGNMENT_REQUIRED
+#define U32_ALIGNMENT_REQUIRED /**/
+#endif
/* HAS_UALARM:
* This symbol, if defined, indicates that the ualarm routine is
*/
#define HAS_UALARM /**/
-/* HAS_UNION_SEMUN:
- * This symbol, if defined, indicates that the union semun is
- * defined by including <sys/sem.h>. If not, the user code
- * probably needs to define it as:
- * union semun {
- * int val;
- * struct semid_ds *buf;
- * unsigned short *array;
- * }
- */
-/* USE_SEMCTL_SEMUN:
- * This symbol, if defined, indicates that union semun is
- * used for semctl IPC_STAT.
- */
-/* USE_SEMCTL_SEMID_DS:
- * This symbol, if defined, indicates that struct semid_ds * is
- * used for semctl IPC_STAT.
- */
-/*#define HAS_UNION_SEMUN / **/
-#define USE_SEMCTL_SEMUN /**/
-#define USE_SEMCTL_SEMID_DS /**/
-
/* HAS_UNORDERED:
* This symbol, if defined, indicates that the unordered routine is
* available to check whether two doubles are unordered
*/
#define HAS_UNORDERED /**/
-/* HAS_USTAT:
- * This symbol, if defined, indicates that the ustat system call is
- * available to query file system statistics by dev_t.
- */
-#define HAS_USTAT /**/
-
-/* HAS_VFORK:
- * This symbol, if defined, indicates that vfork() exists.
- */
-/*#define HAS_VFORK / **/
-
-/* Signal_t:
- * This symbol's value is either "void" or "int", corresponding to the
- * appropriate return type of a signal handler. Thus, you can declare
- * a signal handler using "Signal_t (*handler)()", and define the
- * handler using "Signal_t handler(sig)".
- */
-#define Signal_t void /* Signal handler's return type */
-
-/* HAS_VPRINTF:
- * This symbol, if defined, indicates that the vprintf routine is available
- * to printf with a pointer to an argument list. If unavailable, you
- * may need to write your own, probably in terms of _doprnt().
+/* HAS_USLEEP_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the usleep() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern int usleep(useconds_t);
*/
-/* USE_CHAR_VSPRINTF:
- * This symbol is defined if this system has vsprintf() returning type
- * (char*). The trend seems to be to declare it as "int vsprintf()". It
- * is up to the package author to declare vsprintf correctly based on the
- * symbol.
+/*#define HAS_USLEEP_PROTO / **/
+
+/* HAS_USTAT:
+ * This symbol, if defined, indicates that the ustat system call is
+ * available to query file system statistics by dev_t.
*/
-#define HAS_VPRINTF /**/
-/*#define USE_CHAR_VSPRINTF / **/
+#define HAS_USTAT /**/
/* HAS_WRITEV:
* This symbol, if defined, indicates that the writev routine is
*/
#define USE_DYNAMIC_LOADING /**/
-/* DOUBLESIZE:
- * This symbol contains the size of a double, so that the C preprocessor
- * can make decisions based on it.
- */
-#define DOUBLESIZE 8 /**/
-
-/* EBCDIC:
- * This symbol, if defined, indicates that this system uses
- * EBCDIC encoding.
- */
-/*#define EBCDIC / **/
-
/* FFLUSH_NULL:
* This symbol, if defined, tells that fflush(NULL) does flush
* all pending stdio output.
#define FFLUSH_NULL /**/
/*#define FFLUSH_ALL / **/
-/* Fpos_t:
- * This symbol holds the type used to declare file positions in libc.
- * It can be fpos_t, long, uint, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
- */
-#define Fpos_t fpos_t /* File position type */
-
-/* Gid_t_f:
- * This symbol defines the format string used for printing a Gid_t.
- */
-#define Gid_t_f "ld" /**/
-
-/* Gid_t_sign:
- * This symbol holds the signedess of a Gid_t.
- * 1 for unsigned, -1 for signed.
- */
-#define Gid_t_sign -1 /* GID sign */
-
-/* Gid_t_size:
- * This symbol holds the size of a Gid_t in bytes.
- */
-#define Gid_t_size 4 /* GID size */
-
-/* Gid_t:
- * This symbol holds the return type of getgid() and the type of
- * argument to setrgid() and related functions. Typically,
- * it is the type of group ids in the kernel. It can be int, ushort,
- * gid_t, etc... It may be necessary to include <sys/types.h> to get
- * any typedef'ed information.
- */
-#define Gid_t gid_t /* Type for getgid(), etc... */
-
-/* Groups_t:
- * This symbol holds the type used for the second argument to
- * getgroups() and setgroups(). Usually, this is the same as
- * gidtype (gid_t) , but sometimes it isn't.
- * It can be int, ushort, gid_t, etc...
- * It may be necessary to include <sys/types.h> to get any
- * typedef'ed information. This is only required if you have
- * getgroups() or setgroups()..
+/* I_CRYPT:
+ * This symbol, if defined, indicates that <crypt.h> exists and
+ * should be included.
*/
-#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
-#define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */
-#endif
+#define I_CRYPT /**/
/* DB_Prefix_t:
* This symbol contains the type of the prefix structure element
*/
#define DB_Hash_t u_int32_t /**/
#define DB_Prefix_t size_t /**/
-#define DB_VERSION_MAJOR_CFG /**/
-#define DB_VERSION_MINOR_CFG /**/
-#define DB_VERSION_PATCH_CFG /**/
+#define DB_VERSION_MAJOR_CFG 1 /**/
+#define DB_VERSION_MINOR_CFG 0 /**/
+#define DB_VERSION_PATCH_CFG 0 /**/
-/* I_FP_CLASS:
- * This symbol, if defined, indicates that <fp_class.h> exists and
+/* I_FP:
+ * This symbol, if defined, indicates that <fp.h> exists and
* should be included.
*/
-/*#define I_FP_CLASS / **/
+#define I_FP /**/
-/* I_GRP:
- * This symbol, if defined, indicates to the C program that it should
- * include <grp.h>.
- */
-/* GRPASSWD:
- * This symbol, if defined, indicates to the C program that struct group
- * in <grp.h> contains gr_passwd.
+/* I_FP_CLASS:
+ * This symbol, if defined, indicates that <fp_class.h> exists and
+ * should be included.
*/
-#define I_GRP /**/
-#define GRPASSWD /**/
+#define I_FP_CLASS /**/
/* I_IEEEFP:
* This symbol, if defined, indicates that <ieeefp.h> exists and
*/
#define I_INTTYPES /**/
+/* I_LANGINFO:
+ * This symbol, if defined, indicates that <langinfo.h> exists and
+ * should be included.
+ */
+#define I_LANGINFO /**/
+
/* I_LIBUTIL:
* This symbol, if defined, indicates that <libutil.h> exists and
* should be included.
*/
/*#define I_LIBUTIL / **/
-/* I_MACH_CTHREADS:
- * This symbol, if defined, indicates to the C program that it should
- * include <mach/cthreads.h>.
- */
-/*#define I_MACH_CTHREADS / **/
-
/* I_MNTENT:
* This symbol, if defined, indicates that <mntent.h> exists and
* should be included.
*/
-#define I_MNTENT /**/
-
-/* I_NETDB:
- * This symbol, if defined, indicates that <netdb.h> exists and
- * should be included.
- */
-#define I_NETDB /**/
+/*#define I_MNTENT / **/
/* I_NETINET_TCP:
* This symbol, if defined, indicates to the C program that it should
*/
#define I_PROT /**/
-/* I_PTHREAD:
- * This symbol, if defined, indicates to the C program that it should
- * include <pthread.h>.
- */
-#define I_PTHREAD /**/
-
-/* I_PWD:
- * This symbol, if defined, indicates to the C program that it should
- * include <pwd.h>.
- */
-/* PWQUOTA:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_quota.
- */
-/* PWAGE:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_age.
- */
-/* PWCHANGE:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_change.
- */
-/* PWCLASS:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_class.
- */
-/* PWEXPIRE:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_expire.
- */
-/* PWCOMMENT:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_comment.
- */
-/* PWGECOS:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_gecos.
- */
-/* PWPASSWD:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_passwd.
- */
-#define I_PWD /**/
-/*#define PWQUOTA / **/
-#define PWAGE /**/
-/*#define PWCHANGE / **/
-/*#define PWCLASS / **/
-/*#define PWEXPIRE / **/
-#define PWCOMMENT /**/
-#define PWGECOS /**/
-#define PWPASSWD /**/
-
/* I_SHADOW:
* This symbol, if defined, indicates that <shadow.h> exists and
* should be included.
*/
-#define I_SHADOW /**/
+/*#define I_SHADOW / **/
/* I_SOCKS:
* This symbol, if defined, indicates that <socks.h> exists and
* This symbol, if defined, indicates that <sys/mode.h> exists and
* should be included.
*/
-/*#define I_SYSMODE / **/
+#define I_SYSMODE /**/
/* I_SYS_MOUNT:
* This symbol, if defined, indicates that <sys/mount.h> exists and
* This symbol, if defined, indicates that <sys/statvfs.h> exists and
* should be included.
*/
-#define I_SYS_STATVFS /**/
-
-/* I_SYSUIO:
- * This symbol, if defined, indicates that <sys/uio.h> exists and
- * should be included.
- */
-#define I_SYSUIO /**/
-
-/* I_SYSUTSNAME:
- * This symbol, if defined, indicates that <sys/utsname.h> exists and
- * should be included.
- */
-#define I_SYSUTSNAME /**/
-
-/* I_SYS_VFS:
- * This symbol, if defined, indicates that <sys/vfs.h> exists and
- * should be included.
- */
-#define I_SYS_VFS /**/
-
-/* I_TIME:
- * This symbol, if defined, indicates to the C program that it should
- * include <time.h>.
- */
-/* I_SYS_TIME:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/time.h>.
- */
-/* I_SYS_TIME_KERNEL:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/time.h> with KERNEL defined.
- */
-/* HAS_TM_TM_ZONE:
- * This symbol, if defined, indicates to the C program that
- * the struct tm has a tm_zone field.
- */
-/*#define I_TIME / **/
-#define I_SYS_TIME /**/
-/*#define I_SYS_TIME_KERNEL / **/
-/*#define HAS_TM_TM_ZONE / **/
-
-/* I_USTAT:
- * This symbol, if defined, indicates that <ustat.h> exists and
- * should be included.
- */
-#define I_USTAT /**/
-
-/* PERL_INC_VERSION_LIST:
- * This variable specifies the list of subdirectories in over
- * which perl.c:incpush() and lib/lib.pm will automatically
- * search when adding directories to @INC, in a format suitable
- * for a C initialization string. See the inc_version_list entry
- * in Porting/Glossary for more details.
- */
-#define PERL_INC_VERSION_LIST 0 /**/
-
-/* INSTALL_USR_BIN_PERL:
- * This symbol, if defined, indicates that Perl is to be installed
- * also as /usr/bin/perl.
- */
-/*#define INSTALL_USR_BIN_PERL / **/
-
-/* PERL_PRIfldbl:
- * This symbol, if defined, contains the string used by stdio to
- * format long doubles (format 'f') for output.
- */
-/* PERL_PRIgldbl:
- * This symbol, if defined, contains the string used by stdio to
- * format long doubles (format 'g') for output.
- */
-/* PERL_PRIeldbl:
- * This symbol, if defined, contains the string used by stdio to
- * format long doubles (format 'e') for output.
- */
-/* PERL_SCNfldbl:
- * This symbol, if defined, contains the string used by stdio to
- * format long doubles (format 'f') for input.
- */
-#define PERL_PRIfldbl "Lf" /**/
-#define PERL_PRIgldbl "Lg" /**/
-#define PERL_PRIeldbl "Le" /**/
-#define PERL_SCNfldbl "Lf" /**/
-
-/* Off_t:
- * This symbol holds the type used to declare offsets in the kernel.
- * It can be int, long, off_t, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
- */
-/* LSEEKSIZE:
- * This symbol holds the number of bytes used by the Off_t.
- */
-/* Off_t_size:
- * This symbol holds the number of bytes used by the Off_t.
- */
-#define Off_t off_t /* <offset> type */
-#define LSEEKSIZE 8 /* <offset> size */
-#define Off_t_size 8 /* <offset> size */
-
-/* Free_t:
- * This variable contains the return type of free(). It is usually
- * void, but occasionally int.
- */
-/* Malloc_t:
- * This symbol is the type of pointer returned by malloc and realloc.
- */
-#define Malloc_t void * /**/
-#define Free_t void /**/
+#define I_SYS_STATVFS /**/
-/* MYMALLOC:
- * This symbol, if defined, indicates that we're using our own malloc.
+/* I_SYSUTSNAME:
+ * This symbol, if defined, indicates that <sys/utsname.h> exists and
+ * should be included.
*/
-/*#define MYMALLOC / **/
+#define I_SYSUTSNAME /**/
-/* Mode_t:
- * This symbol holds the type used to declare file modes
- * for systems calls. It is usually mode_t, but may be
- * int or unsigned short. It may be necessary to include <sys/types.h>
- * to get any typedef'ed information.
+/* I_SYS_VFS:
+ * This symbol, if defined, indicates that <sys/vfs.h> exists and
+ * should be included.
*/
-#define Mode_t mode_t /* file mode parameter for system calls */
+/*#define I_SYS_VFS / **/
-/* VAL_O_NONBLOCK:
- * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
- * non-blocking I/O for the file descriptor. Note that there is no way
- * back, i.e. you cannot turn it blocking again this way. If you wish to
- * alternatively switch between blocking and non-blocking, use the
- * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
+/* I_USTAT:
+ * This symbol, if defined, indicates that <ustat.h> exists and
+ * should be included.
*/
-/* VAL_EAGAIN:
- * This symbol holds the errno error code set by read() when no data was
- * present on the non-blocking file descriptor.
+#define I_USTAT /**/
+
+/* PERL_PRIfldbl:
+ * This symbol, if defined, contains the string used by stdio to
+ * format long doubles (format 'f') for output.
*/
-/* RD_NODATA:
- * This symbol holds the return code from read() when no data is present
- * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
- * not defined, then you can't distinguish between no data and EOF by
- * issuing a read(). You'll have to find another way to tell for sure!
+/* PERL_PRIgldbl:
+ * This symbol, if defined, contains the string used by stdio to
+ * format long doubles (format 'g') for output.
*/
-/* EOF_NONBLOCK:
- * This symbol, if defined, indicates to the C program that a read() on
- * a non-blocking file descriptor will return 0 on EOF, and not the value
- * held in RD_NODATA (-1 usually, in that case!).
+/* PERL_PRIeldbl:
+ * This symbol, if defined, contains the string used by stdio to
+ * format long doubles (format 'e') for output.
*/
-#define VAL_O_NONBLOCK O_NONBLOCK
-#define VAL_EAGAIN EAGAIN
-#define RD_NODATA -1
-#define EOF_NONBLOCK
+/* PERL_SCNfldbl:
+ * This symbol, if defined, contains the string used by stdio to
+ * format long doubles (format 'f') for input.
+ */
+#define PERL_PRIfldbl "f" /**/
+#define PERL_PRIgldbl "g" /**/
+#define PERL_PRIeldbl "e" /**/
+#define PERL_SCNfldbl "f" /**/
/* NEED_VA_COPY:
* This symbol, if defined, indicates that the system stores
*/
/*#define NEED_VA_COPY / **/
-/* Netdb_host_t:
- * This symbol holds the type used for the 1st argument
- * to gethostbyaddr().
- */
-/* Netdb_hlen_t:
- * This symbol holds the type used for the 2nd argument
- * to gethostbyaddr().
- */
-/* Netdb_name_t:
- * This symbol holds the type used for the argument to
- * gethostbyname().
- */
-/* Netdb_net_t:
- * This symbol holds the type used for the 1st argument to
- * getnetbyaddr().
- */
-#define Netdb_host_t const char * /**/
-#define Netdb_hlen_t int /**/
-#define Netdb_name_t const char * /**/
-#define Netdb_net_t int /**/
-
-/* PERL_OTHERLIBDIRS:
- * This variable contains a colon-separated set of paths for the perl
- * binary to search for additional library files or modules.
- * These directories will be tacked to the end of @INC.
- * Perl will automatically search below each path for version-
- * and architecture-specific directories. See PERL_INC_VERSION_LIST
- * for more details.
- */
-/*#define PERL_OTHERLIBDIRS " " / **/
-
/* IVTYPE:
* This symbol defines the C type used for Perl's IV.
*/
* This symbol contains the sizeof(U16).
*/
/* I32SIZE:
- * This symbol contains the sizeof(I32).
- */
-/* U32SIZE:
- * This symbol contains the sizeof(U32).
- */
-/* I64SIZE:
- * This symbol contains the sizeof(I64).
- */
-/* U64SIZE:
- * This symbol contains the sizeof(U64).
- */
-/* NVSIZE:
- * This symbol contains the sizeof(NV).
- */
-/* NV_PRESERVES_UV:
- * This symbol, if defined, indicates that a variable of type NVTYPE
- * can preserve all the bits of a variable of type UVTYPE.
- */
-/* NV_PRESERVES_UV_BITS:
- * This symbol contains the number of bits a variable of type NVTYPE
- * can preserve of a variable of type UVTYPE.
- */
-#define IVTYPE long /**/
-#define UVTYPE unsigned long /**/
-#define I8TYPE char /**/
-#define U8TYPE unsigned char /**/
-#define I16TYPE short /**/
-#define U16TYPE unsigned short /**/
-#define I32TYPE long /**/
-#define U32TYPE unsigned long /**/
-#ifdef HAS_QUAD
-#define I64TYPE long long /**/
-#define U64TYPE unsigned long long /**/
-#endif
-#define NVTYPE double /**/
-#define IVSIZE 4 /**/
-#define UVSIZE 4 /**/
-#define I8SIZE 1 /**/
-#define U8SIZE 1 /**/
-#define I16SIZE 2 /**/
-#define U16SIZE 2 /**/
-#define I32SIZE 4 /**/
-#define U32SIZE 4 /**/
-#ifdef HAS_QUAD
-#define I64SIZE 8 /**/
-#define U64SIZE 8 /**/
-#endif
-#define NVSIZE 8 /**/
-#define NV_PRESERVES_UV
-#define NV_PRESERVES_UV_BITS 32
-
-/* IVdf:
- * This symbol defines the format string used for printing a Perl IV
- * as a signed decimal integer.
- */
-/* UVuf:
- * This symbol defines the format string used for printing a Perl UV
- * as an unsigned decimal integer.
- */
-/* UVof:
- * This symbol defines the format string used for printing a Perl UV
- * as an unsigned octal integer.
- */
-/* UVxf:
- * This symbol defines the format string used for printing a Perl UV
- * as an unsigned hexadecimal integer in lowercase abcdef.
- */
-/* UVXf:
- * This symbol defines the format string used for printing a Perl UV
- * as an unsigned hexadecimal integer in uppercase ABCDEF.
- */
-/* NVef:
- * This symbol defines the format string used for printing a Perl NV
- * using %e-ish floating point format.
- */
-/* NVff:
- * This symbol defines the format string used for printing a Perl NV
- * using %f-ish floating point format.
- */
-/* NVgf:
- * This symbol defines the format string used for printing a Perl NV
- * using %g-ish floating point format.
- */
-#define IVdf "ld" /**/
-#define UVuf "lu" /**/
-#define UVof "lo" /**/
-#define UVxf "lx" /**/
-#define UVXf "lX" /**/
-#define NVef "e" /**/
-#define NVff "f" /**/
-#define NVgf "g" /**/
-
-/* Pid_t:
- * This symbol holds the type used to declare process ids in the kernel.
- * It can be int, uint, pid_t, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
- */
-#define Pid_t pid_t /* PID type */
-
-/* PRIVLIB:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
- */
-/* PRIVLIB_EXP:
- * This symbol contains the ~name expanded version of PRIVLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#define PRIVLIB "/opt/perl/lib/5.9.0" /**/
-#define PRIVLIB_EXP "/opt/perl/lib/5.9.0" /**/
-
-/* PTRSIZE:
- * This symbol contains the size of a pointer, so that the C preprocessor
- * can make decisions based on it. It will be sizeof(void *) if
- * the compiler supports (void *); otherwise it will be
- * sizeof(char *).
- */
-#define PTRSIZE 4 /**/
-
-/* Drand01:
- * This macro is to be used to generate uniformly distributed
- * random numbers over the range [0., 1.[. You may have to supply
- * an 'extern double drand48();' in your program since SunOS 4.1.3
- * doesn't provide you with anything relevant in its headers.
- * See HAS_DRAND48_PROTO.
- */
-/* Rand_seed_t:
- * This symbol defines the type of the argument of the
- * random seed function.
- */
-/* seedDrand01:
- * This symbol defines the macro to be used in seeding the
- * random number generator (see Drand01).
- */
-/* RANDBITS:
- * This symbol indicates how many bits are produced by the
- * function used to generate normalized random numbers.
- * Values include 15, 16, 31, and 48.
- */
-#define Drand01() drand48() /**/
-#define Rand_seed_t long /**/
-#define seedDrand01(x) srand48((Rand_seed_t)x) /**/
-#define RANDBITS 48 /**/
-
-/* SELECT_MIN_BITS:
- * This symbol holds the minimum number of bits operated by select.
- * That is, if you do select(n, ...), how many bits at least will be
- * cleared in the masks if some activity is detected. Usually this
- * is either n or 32*ceil(n/32), especially many little-endians do
- * the latter. This is only useful if you have select(), naturally.
- */
-#define SELECT_MIN_BITS 32 /**/
-
-/* Select_fd_set_t:
- * This symbol holds the type used for the 2nd, 3rd, and 4th
- * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
- * is defined, and 'int *' otherwise. This is only useful if you
- * have select(), of course.
- */
-#define Select_fd_set_t fd_set * /**/
-
-/* SIG_NAME:
- * This symbol contains a list of signal names in order of
- * signal number. This is intended
- * to be used as a static array initialization, like this:
- * char *sig_name[] = { SIG_NAME };
- * The signals in the list are separated with commas, and each signal
- * is surrounded by double quotes. There is no leading SIG in the signal
- * name, i.e. SIGQUIT is known as "QUIT".
- * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
- * etc., where nn is the actual signal number (e.g. NUM37).
- * The signal number for sig_name[i] is stored in sig_num[i].
- * The last element is 0 to terminate the list with a NULL. This
- * corresponds to the 0 at the end of the sig_num list.
+ * This symbol contains the sizeof(I32).
*/
-/* SIG_NUM:
- * This symbol contains a list of signal numbers, in the same order as the
- * SIG_NAME list. It is suitable for static array initialization, as in:
- * int sig_num[] = { SIG_NUM };
- * The signals in the list are separated with commas, and the indices
- * within that list and the SIG_NAME list match, so it's easy to compute
- * the signal name from a number or vice versa at the price of a small
- * dynamic linear lookup.
- * Duplicates are allowed, but are moved to the end of the list.
- * The signal number corresponding to sig_name[i] is sig_number[i].
- * if (i < NSIG) then sig_number[i] == i.
- * The last element is 0, corresponding to the 0 at the end of
- * the sig_name list.
+/* U32SIZE:
+ * This symbol contains the sizeof(U32).
*/
-/* SIG_SIZE:
- * This variable contains the number of elements of the sig_name
- * and sig_num arrays, excluding the final NULL entry.
+/* I64SIZE:
+ * This symbol contains the sizeof(I64).
*/
-#define SIG_NAME "ZERO", "HUP", "INT", "QUIT", "ILL", "TRAP", "ABRT", "EMT", "FPE", "KILL", "BUS", "SEGV", "SYS", "PIPE", "ALRM", "TERM", "USR1", "USR2", "CHLD", "PWR", "VTALRM", "PROF", "IO", "WINCH", "STOP", "TSTP", "CONT", "TTIN", "TTOU", "URG", "LOST", "NUM31", "DIL", "XCPU", "XFSZ", "CANCEL", "GFAULT", "RTMIN", "NUM38", "NUM39", "NUM40", "NUM41", "NUM42", "NUM43", "RTMAX", "IOT", "CLD", "POLL", "WINDOW", 0 /**/
-#define SIG_NUM 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 6, 18, 22, 23, 0 /**/
-#define SIG_SIZE 49 /**/
-
-/* SITEARCH:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
- * The standard distribution will put nothing in this directory.
- * After perl has been installed, users may install their own local
- * architecture-dependent modules in this directory with
- * MakeMaker Makefile.PL
- * or equivalent. See INSTALL for details.
+/* U64SIZE:
+ * This symbol contains the sizeof(U64).
*/
-/* SITEARCH_EXP:
- * This symbol contains the ~name expanded version of SITEARCH, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
+/* NVSIZE:
+ * This symbol contains the sizeof(NV).
+ */
+/* NV_PRESERVES_UV:
+ * This symbol, if defined, indicates that a variable of type NVTYPE
+ * can preserve all the bits of a variable of type UVTYPE.
+ */
+/* NV_PRESERVES_UV_BITS:
+ * This symbol contains the number of bits a variable of type NVTYPE
+ * can preserve of a variable of type UVTYPE.
*/
-#define SITEARCH "/opt/perl/lib/site_perl/5.9.0/PA-RISC2.0" /**/
-#define SITEARCH_EXP "/opt/perl/lib/site_perl/5.9.0/PA-RISC2.0" /**/
+#define IVTYPE long /**/
+#define UVTYPE unsigned long /**/
+#define I8TYPE char /**/
+#define U8TYPE unsigned char /**/
+#define I16TYPE short /**/
+#define U16TYPE unsigned short /**/
+#define I32TYPE int /**/
+#define U32TYPE unsigned int /**/
+#ifdef HAS_QUAD
+#define I64TYPE long /**/
+#define U64TYPE unsigned long /**/
+#endif
+#define NVTYPE double /**/
+#define IVSIZE 8 /**/
+#define UVSIZE 8 /**/
+#define I8SIZE 1 /**/
+#define U8SIZE 1 /**/
+#define I16SIZE 2 /**/
+#define U16SIZE 2 /**/
+#define I32SIZE 4 /**/
+#define U32SIZE 4 /**/
+#ifdef HAS_QUAD
+#define I64SIZE 8 /**/
+#define U64SIZE 8 /**/
+#endif
+#define NVSIZE 8 /**/
+#undef NV_PRESERVES_UV
+#define NV_PRESERVES_UV_BITS 53
-/* SITELIB:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
- * The standard distribution will put nothing in this directory.
- * After perl has been installed, users may install their own local
- * architecture-independent modules in this directory with
- * MakeMaker Makefile.PL
- * or equivalent. See INSTALL for details.
+/* IVdf:
+ * This symbol defines the format string used for printing a Perl IV
+ * as a signed decimal integer.
*/
-/* SITELIB_EXP:
- * This symbol contains the ~name expanded version of SITELIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
+/* UVuf:
+ * This symbol defines the format string used for printing a Perl UV
+ * as an unsigned decimal integer.
*/
-/* SITELIB_STEM:
- * This define is SITELIB_EXP with any trailing version-specific component
- * removed. The elements in inc_version_list (inc_version_list.U) can
- * be tacked onto this variable to generate a list of directories to search.
+/* UVof:
+ * This symbol defines the format string used for printing a Perl UV
+ * as an unsigned octal integer.
*/
-#define SITELIB "/opt/perl/lib/site_perl/5.9.0" /**/
-#define SITELIB_EXP "/opt/perl/lib/site_perl/5.9.0" /**/
-#define SITELIB_STEM "/opt/perl/lib/site_perl" /**/
-
-/* Size_t_size:
- * This symbol holds the size of a Size_t in bytes.
+/* UVxf:
+ * This symbol defines the format string used for printing a Perl UV
+ * as an unsigned hexadecimal integer in lowercase abcdef.
*/
-#define Size_t_size 4 /* */
-
-/* Size_t:
- * This symbol holds the type used to declare length parameters
- * for string functions. It is usually size_t, but may be
- * unsigned long, int, etc. It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
+/* UVXf:
+ * This symbol defines the format string used for printing a Perl UV
+ * as an unsigned hexadecimal integer in uppercase ABCDEF.
*/
-#define Size_t size_t /* length paramater for string functions */
-
-/* Sock_size_t:
- * This symbol holds the type used for the size argument of
- * various socket calls (just the base type, not the pointer-to).
+/* NVef:
+ * This symbol defines the format string used for printing a Perl NV
+ * using %e-ish floating point format.
*/
-#define Sock_size_t int /**/
+/* NVff:
+ * This symbol defines the format string used for printing a Perl NV
+ * using %f-ish floating point format.
+ */
+/* NVgf:
+ * This symbol defines the format string used for printing a Perl NV
+ * using %g-ish floating point format.
+ */
+#define IVdf "ld" /**/
+#define UVuf "lu" /**/
+#define UVof "lo" /**/
+#define UVxf "lx" /**/
+#define UVXf "lX" /**/
+#define NVef "e" /**/
+#define NVff "f" /**/
+#define NVgf "g" /**/
-/* SSize_t:
- * This symbol holds the type used by functions that return
- * a count of bytes or an error condition. It must be a signed type.
- * It is usually ssize_t, but may be long or int, etc.
- * It may be necessary to include <sys/types.h> or <unistd.h>
- * to get any typedef'ed information.
- * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
+/* SELECT_MIN_BITS:
+ * This symbol holds the minimum number of bits operated by select.
+ * That is, if you do select(n, ...), how many bits at least will be
+ * cleared in the masks if some activity is detected. Usually this
+ * is either n or 32*ceil(n/32), especially many little-endians do
+ * the latter. This is only useful if you have select(), naturally.
*/
-#define SSize_t ssize_t /* signed count of bytes */
+#define SELECT_MIN_BITS 32 /**/
/* STARTPERL:
* This variable contains the string to put in front of a perl
*/
#define STARTPERL "#!/opt/perl/bin/perl5.9.0" /**/
-/* STDCHAR:
- * This symbol is defined to be the type of char used in stdio.h.
- * It has the values "unsigned char" or "char".
- */
-#define STDCHAR unsigned char /**/
-
/* HAS_STDIO_STREAM_ARRAY:
* This symbol, if defined, tells that there is an array
* holding the stdio streams.
#define HAS_STDIO_STREAM_ARRAY /**/
#define STDIO_STREAM_ARRAY _iob
-/* Uid_t_f:
- * This symbol defines the format string used for printing a Uid_t.
- */
-#define Uid_t_f "ld" /**/
-
-/* Uid_t_sign:
- * This symbol holds the signedess of a Uid_t.
- * 1 for unsigned, -1 for signed.
- */
-#define Uid_t_sign -1 /* UID sign */
-
-/* Uid_t_size:
- * This symbol holds the size of a Uid_t in bytes.
- */
-#define Uid_t_size 4 /* UID size */
-
-/* Uid_t:
- * This symbol holds the type used to declare user ids in the kernel.
- * It can be int, ushort, uid_t, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
- */
-#define Uid_t uid_t /* UID type */
-
/* USE_64_BIT_INT:
* This symbol, if defined, indicates that 64-bit integers should
* be used when available. If not defined, the native integers
* you may need at least to reboot your OS to 64-bit mode.
*/
#ifndef USE_64_BIT_INT
-/*#define USE_64_BIT_INT / **/
+#define USE_64_BIT_INT /**/
#endif
#ifndef USE_64_BIT_ALL
-/*#define USE_64_BIT_ALL / **/
+#define USE_64_BIT_ALL /**/
#endif
/* USE_LARGE_FILES:
#define USE_PERLIO /**/
#endif
-/* USE_SOCKS:
- * This symbol, if defined, indicates that Perl should
- * be built to use socks.
- */
-#ifndef USE_SOCKS
-/*#define USE_SOCKS / **/
-#endif
-
-/* USE_ITHREADS:
- * This symbol, if defined, indicates that Perl should be built to
- * use the interpreter-based threading implementation.
- */
-/* OLD_PTHREADS_API:
- * This symbol, if defined, indicates that Perl should
- * be built to use the old draft POSIX threads API.
- */
-/* USE_REENTRANT_API:
- * This symbol, if defined, indicates that Perl should
- * try to use the various _r versions of library functions.
- * This is extremely experimental.
- */
-/*#define USE_ITHREADS / **/
-/*#define OLD_PTHREADS_API / **/
-/*#define USE_REENTRANT_API / **/
-
-/* PERL_VENDORARCH:
- * If defined, this symbol contains the name of a private library.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world.
- * It may have a ~ on the front.
- * The standard distribution will put nothing in this directory.
- * Vendors who distribute perl may wish to place their own
- * architecture-dependent modules and extensions in this directory with
- * MakeMaker Makefile.PL INSTALLDIRS=vendor
- * or equivalent. See INSTALL for details.
- */
-/* PERL_VENDORARCH_EXP:
- * This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
- */
-/*#define PERL_VENDORARCH "" / **/
-/*#define PERL_VENDORARCH_EXP "" / **/
-
-/* PERL_VENDORLIB_EXP:
- * This symbol contains the ~name expanded version of VENDORLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
- */
-/* PERL_VENDORLIB_STEM:
- * This define is PERL_VENDORLIB_EXP with any trailing version-specific component
- * removed. The elements in inc_version_list (inc_version_list.U) can
- * be tacked onto this variable to generate a list of directories to search.
- */
-/*#define PERL_VENDORLIB_EXP "" / **/
-/*#define PERL_VENDORLIB_STEM "" / **/
-
-/* VOIDFLAGS:
- * This symbol indicates how much support of the void type is given by this
- * compiler. What various bits mean:
- *
- * 1 = supports declaration of void
- * 2 = supports arrays of pointers to functions returning void
- * 4 = supports comparisons between pointers to void functions and
- * addresses of void functions
- * 8 = suports declaration of generic void pointers
- *
- * The package designer should define VOIDUSED to indicate the requirements
- * of the package. This can be done either by #defining VOIDUSED before
- * including config.h, or by defining defvoidused in Myinit.U. If the
- * latter approach is taken, only those flags will be tested. If the
- * level of void support necessary is not present, defines void to int.
- */
-#ifndef VOIDUSED
-#define VOIDUSED 15
-#endif
-#define VOIDFLAGS 15
-#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
-#define void int /* is void to be avoided? */
-#define M_VOID /* Xenix strikes again */
+/* USE_SOCKS:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use socks.
+ */
+#ifndef USE_SOCKS
+/*#define USE_SOCKS / **/
#endif
/* PERL_XS_APIVERSION:
* This variable contains the version of the oldest perl binary
* compatible with the present perl. perl.c:incpush() and
- * lib/lib.pm will automatically search in /opt/perl/lib/site_perl/5.9.0/PA-RISC2.0 for older
+ * lib/lib.pm will automatically search in /opt/perl/lib/site_perl/5.9.0/alpha-dec_osf for older
* directories across major versions back to xs_apiversion.
* This is only useful if you have a perl library directory tree
* structured like the default one.
#define PERL_XS_APIVERSION "5.9.0"
#define PERL_PM_APIVERSION "5.005"
-/* HAS_CRYPT:
- * This symbol, if defined, indicates that the crypt routine is available
- * to encrypt passwords and the like.
- */
-#define HAS_CRYPT /**/
-
-/* SETUID_SCRIPTS_ARE_SECURE_NOW:
- * This symbol, if defined, indicates that the bug that prevents
- * setuid scripts from being secure is not present in this kernel.
- */
-/* DOSUID:
- * This symbol, if defined, indicates that the C program should
- * check the script that it is executing for setuid/setgid bits, and
- * attempt to emulate setuid/setgid on systems that have disabled
- * setuid #! scripts because the kernel can't do it securely.
- * It is up to the package designer to make sure that this emulation
- * is done securely. Among other things, it should do an fstat on
- * the script it just opened to make sure it really is a setuid/setgid
- * script, it should make sure the arguments passed correspond exactly
- * to the argument on the #! line, and it should not trust any
- * subprocesses to which it must pass the filename rather than the
- * file descriptor of the script to be executed.
- */
-/*#define SETUID_SCRIPTS_ARE_SECURE_NOW / **/
-/*#define DOSUID / **/
-
-/* Shmat_t:
- * This symbol holds the return type of the shmat() system call.
- * Usually set to 'void *' or 'char *'.
- */
-/* HAS_SHMAT_PROTOTYPE:
- * This symbol, if defined, indicates that the sys/shm.h includes
- * a prototype for shmat(). Otherwise, it is up to the program to
- * guess one. Shmat_t shmat(int, Shmat_t, int) is a good guess,
- * but not always right so it should be emitted by the program only
- * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs.
- */
-#define Shmat_t void * /**/
-#define HAS_SHMAT_PROTOTYPE /**/
-
-/* I_NDBM:
- * This symbol, if defined, indicates that <ndbm.h> exists and should
- * be included.
- */
-#define I_NDBM /**/
-
-/* I_STDARG:
- * This symbol, if defined, indicates that <stdarg.h> exists and should
- * be included.
- */
-/* I_VARARGS:
- * This symbol, if defined, indicates to the C program that it should
- * include <varargs.h>.
- */
-#define I_STDARG /**/
-/*#define I_VARARGS / **/
-
-/* CAN_PROTOTYPE:
- * If defined, this macro indicates that the C compiler can handle
- * function prototypes.
- */
-/* _:
- * This macro is used to declare function parameters for folks who want
- * to make declarations with prototypes using a different style than
- * the above macros. Use double parentheses. For example:
- *
- * int main _((int argc, char *argv[]));
- */
-#define CAN_PROTOTYPE /**/
-#ifdef CAN_PROTOTYPE
-#define _(args) args
-#else
-#define _(args) ()
-#endif
-
-/* SH_PATH:
- * This symbol contains the full pathname to the shell used on this
- * on this system to execute Bourne shell scripts. Usually, this will be
- * /bin/sh, though it's possible that some systems will have /bin/ksh,
- * /bin/pdksh, /bin/ash, /bin/bash, or even something such as
- * D:/bin/sh.exe.
- */
-#define SH_PATH "/bin/sh" /**/
-
-/* USE_CROSS_COMPILE:
- * This symbol, if defined, indicates that Perl is being cross-compiled.
- */
-/* PERL_TARGETARCH:
- * This symbol, if defined, indicates the target architecture
- * Perl has been cross-compiled to. Undefined if not a cross-compile.
- */
-#ifndef USE_CROSS_COMPILE
-/*#define USE_CROSS_COMPILE / **/
-#define PERL_TARGETARCH "" /**/
-#endif
-
-/* HAS_DBMINIT_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the dbminit() function. Otherwise, it is up
- * to the program to supply one. A good guess is
- * extern int dbminit(char *);
- */
-/*#define HAS_DBMINIT_PROTO / **/
-
-/* HAS_DIRFD:
- * This manifest constant lets the C program know that dirfd
- * is available.
- */
-#define HAS_DIRFD /**/
-
-/* HAS_FLOCK_PROTO:
+/* HAS_DRAND48_PROTO:
* This symbol, if defined, indicates that the system provides
- * a prototype for the flock() function. Otherwise, it is up
+ * a prototype for the drand48() function. Otherwise, it is up
* to the program to supply one. A good guess is
- * extern int flock(int, int);
- */
-/*#define HAS_FLOCK_PROTO / **/
-
-/* HAS_FPCLASSL:
- * This symbol, if defined, indicates that the fpclassl routine is
- * available to classify long doubles. Available for example in IRIX.
- * The returned values are defined in <ieeefp.h> and are:
- *
- * FP_SNAN signaling NaN
- * FP_QNAN quiet NaN
- * FP_NINF negative infinity
- * FP_PINF positive infinity
- * FP_NDENORM negative denormalized non-zero
- * FP_PDENORM positive denormalized non-zero
- * FP_NZERO negative zero
- * FP_PZERO positive zero
- * FP_NNORM negative normalized non-zero
- * FP_PNORM positive normalized non-zero
+ * extern double drand48(void);
*/
-/*#define HAS_FPCLASSL / **/
+#define HAS_DRAND48_PROTO /**/
-/* HAS_NL_LANGINFO:
- * This symbol, if defined, indicates that the nl_langinfo routine is
- * available to return local data. You will also need <langinfo.h>
- * and therefore I_LANGINFO.
+/* HAS_GETHOST_PROTOS:
+ * This symbol, if defined, indicates that <netdb.h> includes
+ * prototypes for gethostent(), gethostbyname(), and
+ * gethostbyaddr(). Otherwise, it is up to the program to guess
+ * them. See netdbtype.U for probing for various Netdb_xxx_t types.
*/
-#define HAS_NL_LANGINFO /**/
+#define HAS_GETHOST_PROTOS /**/
-/* HAS_PROCSELFEXE:
- * This symbol is defined if PROCSELFEXE_PATH is a symlink
- * to the absolute pathname of the executing program.
- */
-/* PROCSELFEXE_PATH:
- * If HAS_PROCSELFEXE is defined this symbol is the filename
- * of the symbolic link pointing to the absolute pathname of
- * the executing program.
+/* HAS_GETNET_PROTOS:
+ * This symbol, if defined, indicates that <netdb.h> includes
+ * prototypes for getnetent(), getnetbyname(), and
+ * getnetbyaddr(). Otherwise, it is up to the program to guess
+ * them. See netdbtype.U for probing for various Netdb_xxx_t types.
*/
-/*#define HAS_PROCSELFEXE / **/
-#if defined(HAS_PROCSELFEXE) && !defined(PROCSELFEXE_PATH)
-#define PROCSELFEXE_PATH /**/
-#endif
+#define HAS_GETNET_PROTOS /**/
-/* HAS_SIGPROCMASK:
- * This symbol, if defined, indicates that the sigprocmask
- * system call is available to examine or change the signal mask
- * of the calling process.
+/* HAS_GETPROTO_PROTOS:
+ * This symbol, if defined, indicates that <netdb.h> includes
+ * prototypes for getprotoent(), getprotobyname(), and
+ * getprotobyaddr(). Otherwise, it is up to the program to guess
+ * them. See netdbtype.U for probing for various Netdb_xxx_t types.
*/
-#define HAS_SIGPROCMASK /**/
+#define HAS_GETPROTO_PROTOS /**/
-/* HAS_SOCKATMARK:
- * This symbol, if defined, indicates that the sockatmark routine is
- * available to test whether a socket is at the out-of-band mark.
+/* HAS_GETSERV_PROTOS:
+ * This symbol, if defined, indicates that <netdb.h> includes
+ * prototypes for getservent(), getservbyname(), and
+ * getservbyaddr(). Otherwise, it is up to the program to guess
+ * them. See netdbtype.U for probing for various Netdb_xxx_t types.
*/
-/*#define HAS_SOCKATMARK / **/
+#define HAS_GETSERV_PROTOS /**/
-/* HAS_SOCKATMARK_PROTO:
+/* HAS_LSEEK_PROTO:
* This symbol, if defined, indicates that the system provides
- * a prototype for the sockatmark() function. Otherwise, it is up
+ * a prototype for the lseek() function. Otherwise, it is up
* to the program to supply one. A good guess is
- * extern int sockatmark(int);
+ * extern off_t lseek(int, off_t, int);
*/
-/*#define HAS_SOCKATMARK_PROTO / **/
+#define HAS_LSEEK_PROTO /**/
-/* HAS_SETRESGID_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the setresgid() function. Otherwise, it is up
- * to the program to supply one. Good guesses are
- * extern int setresgid(uid_t ruid, uid_t euid, uid_t suid);
+/* Netdb_host_t:
+ * This symbol holds the type used for the 1st argument
+ * to gethostbyaddr().
*/
-#define HAS_SETRESGID_PROTO /**/
-
-/* HAS_SETRESUID_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the setresuid() function. Otherwise, it is up
- * to the program to supply one. Good guesses are
- * extern int setresuid(uid_t ruid, uid_t euid, uid_t suid);
+/* Netdb_hlen_t:
+ * This symbol holds the type used for the 2nd argument
+ * to gethostbyaddr().
*/
-#define HAS_SETRESUID_PROTO /**/
-
-/* HAS_STRFTIME:
- * This symbol, if defined, indicates that the strftime routine is
- * available to do time formatting.
+/* Netdb_name_t:
+ * This symbol holds the type used for the argument to
+ * gethostbyname().
*/
-#define HAS_STRFTIME /**/
-
-/* HAS_SYSCALL_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the syscall() function. Otherwise, it is up
- * to the program to supply one. Good guesses are
- * extern int syscall(int, ...);
- * extern int syscall(long, ...);
+/* Netdb_net_t:
+ * This symbol holds the type used for the 1st argument to
+ * getnetbyaddr().
*/
-/*#define HAS_SYSCALL_PROTO / **/
+#define Netdb_host_t const char * /**/
+#define Netdb_hlen_t int /**/
+#define Netdb_name_t const char * /**/
+#define Netdb_net_t int /**/
-/* U32_ALIGNMENT_REQUIRED:
- * This symbol, if defined, indicates that you must access
- * character data through U32-aligned pointers.
+/* Select_fd_set_t:
+ * This symbol holds the type used for the 2nd, 3rd, and 4th
+ * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
+ * is defined, and 'int *' otherwise. This is only useful if you
+ * have select(), of course.
*/
-#ifndef U32_ALIGNMENT_REQUIRED
-#define U32_ALIGNMENT_REQUIRED /**/
-#endif
+#define Select_fd_set_t fd_set * /**/
-/* HAS_USLEEP_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the usleep() function. Otherwise, it is up
- * to the program to supply one. A good guess is
- * extern int usleep(useconds_t);
+/* Sock_size_t:
+ * This symbol holds the type used for the size argument of
+ * various socket calls (just the base type, not the pointer-to).
*/
-#define HAS_USLEEP_PROTO /**/
+#define Sock_size_t int /**/
-/* I_CRYPT:
- * This symbol, if defined, indicates that <crypt.h> exists and
- * should be included.
+/* ARCHNAME:
+ * This symbol holds a string representing the architecture name.
+ * It may be used to construct an architecture-dependant pathname
+ * where library files may be held under a private library, for
+ * instance.
*/
-#define I_CRYPT /**/
+#define ARCHNAME "alpha-dec_osf" /**/
-/* I_FP:
- * This symbol, if defined, indicates that <fp.h> exists and
- * should be included.
+/* HAS_ASCTIME_R:
+ * This symbol, if defined, indicates that the asctime_r routine
+ * is available to asctime re-entrantly.
+ */
+/* ASCTIME_R_PROTO:
+ * This symbol encodes the prototype of asctime_r.
+ * It is zero if d_asctime_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_asctime_r
+ * is defined.
*/
-/*#define I_FP / **/
+/*#define HAS_ASCTIME_R / **/
+#define ASCTIME_R_PROTO 0 /**/
-/* I_LANGINFO:
- * This symbol, if defined, indicates that <langinfo.h> exists and
- * should be included.
+/* HAS_CRYPT_R:
+ * This symbol, if defined, indicates that the crypt_r routine
+ * is available to crypt re-entrantly.
*/
-#define I_LANGINFO /**/
+/* CRYPT_R_PROTO:
+ * This symbol encodes the prototype of crypt_r.
+ * It is zero if d_crypt_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_crypt_r
+ * is defined.
+ */
+/*#define HAS_CRYPT_R / **/
+#define CRYPT_R_PROTO 0 /**/
/* HAS_CTERMID_R:
* This symbol, if defined, indicates that the ctermid_r routine
/*#define HAS_CTERMID_R / **/
#define CTERMID_R_PROTO 0 /**/
+/* HAS_CTIME_R:
+ * This symbol, if defined, indicates that the ctime_r routine
+ * is available to ctime re-entrantly.
+ */
+/* CTIME_R_PROTO:
+ * This symbol encodes the prototype of ctime_r.
+ * It is zero if d_ctime_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ctime_r
+ * is defined.
+ */
+/*#define HAS_CTIME_R / **/
+#define CTIME_R_PROTO 0 /**/
+
+/* HAS_DRAND48_R:
+ * This symbol, if defined, indicates that the drand48_r routine
+ * is available to drand48 re-entrantly.
+ */
+/* DRAND48_R_PROTO:
+ * This symbol encodes the prototype of drand48_r.
+ * It is zero if d_drand48_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_drand48_r
+ * is defined.
+ */
+/*#define HAS_DRAND48_R / **/
+#define DRAND48_R_PROTO 0 /**/
+
+/* HAS_ENDGRENT_R:
+ * This symbol, if defined, indicates that the endgrent_r routine
+ * is available to endgrent re-entrantly.
+ */
+/* ENDGRENT_R_PROTO:
+ * This symbol encodes the prototype of endgrent_r.
+ * It is zero if d_endgrent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endgrent_r
+ * is defined.
+ */
+/*#define HAS_ENDGRENT_R / **/
+#define ENDGRENT_R_PROTO 0 /**/
+
/* HAS_ENDHOSTENT_R:
* This symbol, if defined, indicates that the endhostent_r routine
* is available to endhostent re-entrantly.
/*#define HAS_ENDPROTOENT_R / **/
#define ENDPROTOENT_R_PROTO 0 /**/
+/* HAS_ENDPWENT_R:
+ * This symbol, if defined, indicates that the endpwent_r routine
+ * is available to endpwent re-entrantly.
+ */
+/* ENDPWENT_R_PROTO:
+ * This symbol encodes the prototype of endpwent_r.
+ * It is zero if d_endpwent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endpwent_r
+ * is defined.
+ */
+/*#define HAS_ENDPWENT_R / **/
+#define ENDPWENT_R_PROTO 0 /**/
+
/* HAS_ENDSERVENT_R:
* This symbol, if defined, indicates that the endservent_r routine
* is available to endservent re-entrantly.
/*#define HAS_ENDSERVENT_R / **/
#define ENDSERVENT_R_PROTO 0 /**/
+/* HAS_GETGRENT_R:
+ * This symbol, if defined, indicates that the getgrent_r routine
+ * is available to getgrent re-entrantly.
+ */
+/* GETGRENT_R_PROTO:
+ * This symbol encodes the prototype of getgrent_r.
+ * It is zero if d_getgrent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrent_r
+ * is defined.
+ */
+/*#define HAS_GETGRENT_R / **/
+#define GETGRENT_R_PROTO 0 /**/
+
+/* HAS_GETGRGID_R:
+ * This symbol, if defined, indicates that the getgrgid_r routine
+ * is available to getgrgid re-entrantly.
+ */
+/* GETGRGID_R_PROTO:
+ * This symbol encodes the prototype of getgrgid_r.
+ * It is zero if d_getgrgid_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrgid_r
+ * is defined.
+ */
+/*#define HAS_GETGRGID_R / **/
+#define GETGRGID_R_PROTO 0 /**/
+
+/* HAS_GETGRNAM_R:
+ * This symbol, if defined, indicates that the getgrnam_r routine
+ * is available to getgrnam re-entrantly.
+ */
+/* GETGRNAM_R_PROTO:
+ * This symbol encodes the prototype of getgrnam_r.
+ * It is zero if d_getgrnam_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrnam_r
+ * is defined.
+ */
+/*#define HAS_GETGRNAM_R / **/
+#define GETGRNAM_R_PROTO 0 /**/
+
/* HAS_GETHOSTBYADDR_R:
* This symbol, if defined, indicates that the gethostbyaddr_r routine
* is available to gethostbyaddr re-entrantly.
/*#define HAS_GETHOSTENT_R / **/
#define GETHOSTENT_R_PROTO 0 /**/
+/* HAS_GETLOGIN_R:
+ * This symbol, if defined, indicates that the getlogin_r routine
+ * is available to getlogin re-entrantly.
+ */
+/* GETLOGIN_R_PROTO:
+ * This symbol encodes the prototype of getlogin_r.
+ * It is zero if d_getlogin_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getlogin_r
+ * is defined.
+ */
+/*#define HAS_GETLOGIN_R / **/
+#define GETLOGIN_R_PROTO 0 /**/
+
/* HAS_GETNETBYADDR_R:
* This symbol, if defined, indicates that the getnetbyaddr_r routine
* is available to getnetbyaddr re-entrantly.
/*#define HAS_GETPROTOENT_R / **/
#define GETPROTOENT_R_PROTO 0 /**/
+/* HAS_GETPWENT_R:
+ * This symbol, if defined, indicates that the getpwent_r routine
+ * is available to getpwent re-entrantly.
+ */
+/* GETPWENT_R_PROTO:
+ * This symbol encodes the prototype of getpwent_r.
+ * It is zero if d_getpwent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwent_r
+ * is defined.
+ */
+/*#define HAS_GETPWENT_R / **/
+#define GETPWENT_R_PROTO 0 /**/
+
+/* HAS_GETPWNAM_R:
+ * This symbol, if defined, indicates that the getpwnam_r routine
+ * is available to getpwnam re-entrantly.
+ */
+/* GETPWNAM_R_PROTO:
+ * This symbol encodes the prototype of getpwnam_r.
+ * It is zero if d_getpwnam_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwnam_r
+ * is defined.
+ */
+/*#define HAS_GETPWNAM_R / **/
+#define GETPWNAM_R_PROTO 0 /**/
+
+/* HAS_GETPWUID_R:
+ * This symbol, if defined, indicates that the getpwuid_r routine
+ * is available to getpwuid re-entrantly.
+ */
+/* GETPWUID_R_PROTO:
+ * This symbol encodes the prototype of getpwuid_r.
+ * It is zero if d_getpwuid_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwuid_r
+ * is defined.
+ */
+/*#define HAS_GETPWUID_R / **/
+#define GETPWUID_R_PROTO 0 /**/
+
/* HAS_GETSERVBYNAME_R:
* This symbol, if defined, indicates that the getservbyname_r routine
* is available to getservbyname re-entrantly.
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservent_r
* is defined.
*/
-/*#define HAS_GETSERVENT_R / **/
-#define GETSERVENT_R_PROTO 0 /**/
+/*#define HAS_GETSERVENT_R / **/
+#define GETSERVENT_R_PROTO 0 /**/
+
+/* HAS_GETSPNAM_R:
+ * This symbol, if defined, indicates that the getspnam_r routine
+ * is available to getspnam re-entrantly.
+ */
+/* GETSPNAM_R_PROTO:
+ * This symbol encodes the prototype of getspnam_r.
+ * It is zero if d_getspnam_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getspnam_r
+ * is defined.
+ */
+/*#define HAS_GETSPNAM_R / **/
+#define GETSPNAM_R_PROTO 0 /**/
+
+/* HAS_GMTIME_R:
+ * This symbol, if defined, indicates that the gmtime_r routine
+ * is available to gmtime re-entrantly.
+ */
+/* GMTIME_R_PROTO:
+ * This symbol encodes the prototype of gmtime_r.
+ * It is zero if d_gmtime_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gmtime_r
+ * is defined.
+ */
+/*#define HAS_GMTIME_R / **/
+#define GMTIME_R_PROTO 0 /**/
+
+/* HAS_LOCALTIME_R:
+ * This symbol, if defined, indicates that the localtime_r routine
+ * is available to localtime re-entrantly.
+ */
+/* LOCALTIME_R_PROTO:
+ * This symbol encodes the prototype of localtime_r.
+ * It is zero if d_localtime_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_localtime_r
+ * is defined.
+ */
+/*#define HAS_LOCALTIME_R / **/
+#define LOCALTIME_R_PROTO 0 /**/
+
+/* OLD_PTHREAD_CREATE_JOINABLE:
+ * This symbol, if defined, indicates how to create pthread
+ * in joinable (aka undetached) state. NOTE: not defined
+ * if pthread.h already has defined PTHREAD_CREATE_JOINABLE
+ * (the new version of the constant).
+ * If defined, known values are PTHREAD_CREATE_UNDETACHED
+ * and __UNDETACHED.
+ */
+/*#define OLD_PTHREAD_CREATE_JOINABLE / **/
+
+/* HAS_PTHREAD_ATFORK:
+ * This symbol, if defined, indicates that the pthread_atfork routine
+ * is available setup fork handlers.
+ */
+#define HAS_PTHREAD_ATFORK /**/
+
+/* HAS_PTHREAD_YIELD:
+ * This symbol, if defined, indicates that the pthread_yield
+ * routine is available to yield the execution of the current
+ * thread. sched_yield is preferable to pthread_yield.
+ */
+/* SCHED_YIELD:
+ * This symbol defines the way to yield the execution of
+ * the current thread. Known ways are sched_yield,
+ * pthread_yield, and pthread_yield with NULL.
+ */
+/* HAS_SCHED_YIELD:
+ * This symbol, if defined, indicates that the sched_yield
+ * routine is available to yield the execution of the current
+ * thread. sched_yield is preferable to pthread_yield.
+ */
+/*#define HAS_PTHREAD_YIELD / **/
+#define SCHED_YIELD sched_yield() /**/
+#define HAS_SCHED_YIELD /**/
-/* HAS_PTHREAD_ATFORK:
- * This symbol, if defined, indicates that the pthread_atfork routine
- * is available setup fork handlers.
+/* HAS_RANDOM_R:
+ * This symbol, if defined, indicates that the random_r routine
+ * is available to random re-entrantly.
*/
-#define HAS_PTHREAD_ATFORK /**/
+/* RANDOM_R_PROTO:
+ * This symbol encodes the prototype of random_r.
+ * It is zero if d_random_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_random_r
+ * is defined.
+ */
+/*#define HAS_RANDOM_R / **/
+#define RANDOM_R_PROTO 0 /**/
/* HAS_READDIR64_R:
* This symbol, if defined, indicates that the readdir64_r routine
/*#define HAS_READDIR64_R / **/
#define READDIR64_R_PROTO 0 /**/
+/* HAS_READDIR_R:
+ * This symbol, if defined, indicates that the readdir_r routine
+ * is available to readdir re-entrantly.
+ */
+/* READDIR_R_PROTO:
+ * This symbol encodes the prototype of readdir_r.
+ * It is zero if d_readdir_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_readdir_r
+ * is defined.
+ */
+/*#define HAS_READDIR_R / **/
+#define READDIR_R_PROTO 0 /**/
+
+/* HAS_SETGRENT_R:
+ * This symbol, if defined, indicates that the setgrent_r routine
+ * is available to setgrent re-entrantly.
+ */
+/* SETGRENT_R_PROTO:
+ * This symbol encodes the prototype of setgrent_r.
+ * It is zero if d_setgrent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setgrent_r
+ * is defined.
+ */
+/*#define HAS_SETGRENT_R / **/
+#define SETGRENT_R_PROTO 0 /**/
+
/* HAS_SETHOSTENT_R:
* This symbol, if defined, indicates that the sethostent_r routine
* is available to sethostent re-entrantly.
/*#define HAS_SETPROTOENT_R / **/
#define SETPROTOENT_R_PROTO 0 /**/
+/* HAS_SETPWENT_R:
+ * This symbol, if defined, indicates that the setpwent_r routine
+ * is available to setpwent re-entrantly.
+ */
+/* SETPWENT_R_PROTO:
+ * This symbol encodes the prototype of setpwent_r.
+ * It is zero if d_setpwent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setpwent_r
+ * is defined.
+ */
+/*#define HAS_SETPWENT_R / **/
+#define SETPWENT_R_PROTO 0 /**/
+
/* HAS_SETSERVENT_R:
* This symbol, if defined, indicates that the setservent_r routine
* is available to setservent re-entrantly.
/*#define HAS_SETSERVENT_R / **/
#define SETSERVENT_R_PROTO 0 /**/
+/* HAS_SRAND48_R:
+ * This symbol, if defined, indicates that the srand48_r routine
+ * is available to srand48 re-entrantly.
+ */
+/* SRAND48_R_PROTO:
+ * This symbol encodes the prototype of srand48_r.
+ * It is zero if d_srand48_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_srand48_r
+ * is defined.
+ */
+/*#define HAS_SRAND48_R / **/
+#define SRAND48_R_PROTO 0 /**/
+
+/* HAS_SRANDOM_R:
+ * This symbol, if defined, indicates that the srandom_r routine
+ * is available to srandom re-entrantly.
+ */
+/* SRANDOM_R_PROTO:
+ * This symbol encodes the prototype of srandom_r.
+ * It is zero if d_srandom_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_srandom_r
+ * is defined.
+ */
+/*#define HAS_SRANDOM_R / **/
+#define SRANDOM_R_PROTO 0 /**/
+
+/* HAS_STRERROR_R:
+ * This symbol, if defined, indicates that the strerror_r routine
+ * is available to strerror re-entrantly.
+ */
+/* STRERROR_R_PROTO:
+ * This symbol encodes the prototype of strerror_r.
+ * It is zero if d_strerror_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_strerror_r
+ * is defined.
+ */
+/*#define HAS_STRERROR_R / **/
+#define STRERROR_R_PROTO 0 /**/
+
+/* HAS_TMPNAM_R:
+ * This symbol, if defined, indicates that the tmpnam_r routine
+ * is available to tmpnam re-entrantly.
+ */
+/* TMPNAM_R_PROTO:
+ * This symbol encodes the prototype of tmpnam_r.
+ * It is zero if d_tmpnam_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_tmpnam_r
+ * is defined.
+ */
+/*#define HAS_TMPNAM_R / **/
+#define TMPNAM_R_PROTO 0 /**/
+
/* HAS_TTYNAME_R:
* This symbol, if defined, indicates that the ttyname_r routine
* is available to ttyname re-entrantly.
/*#define HAS_TTYNAME_R / **/
#define TTYNAME_R_PROTO 0 /**/
+/* I_MACH_CTHREADS:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <mach/cthreads.h>.
+ */
+/*#define I_MACH_CTHREADS / **/
+
+/* I_PTHREAD:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <pthread.h>.
+ */
+#define I_PTHREAD /**/
+
+/* USE_ITHREADS:
+ * This symbol, if defined, indicates that Perl should be built to
+ * use the interpreter-based threading implementation.
+ */
+/* USE_5005THREADS:
+ * This symbol, if defined, indicates that Perl should be built to
+ * use the 5.005-based threading implementation.
+ */
+/* OLD_PTHREADS_API:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use the old draft POSIX threads API.
+ */
+/* USE_REENTRANT_API:
+ * This symbol, if defined, indicates that Perl should
+ * try to use the various _r versions of library functions.
+ * This is extremely experimental.
+ */
+/*#define USE_5005THREADS / **/
+/*#define USE_ITHREADS / **/
+#if defined(USE_5005THREADS) && !defined(USE_ITHREADS)
+#define USE_THREADS /* until src is revised*/
+#endif
+/*#define OLD_PTHREADS_API / **/
+/*#define USE_REENTRANT_API / **/
+
+/* HAS_TIME:
+ * This symbol, if defined, indicates that the time() routine exists.
+ */
+/* Time_t:
+ * This symbol holds the type returned by time(). It can be long,
+ * or time_t on BSD sites (in which case <sys/types.h> should be
+ * included).
+ */
+#define HAS_TIME /**/
+#define Time_t time_t /* Time type */
+
+/* HAS_TIMES:
+ * This symbol, if defined, indicates that the times() routine exists.
+ * Note that this became obsolete on some systems (SUNOS), which now
+ * use getrusage(). It may be necessary to include <sys/times.h>.
+ */
+#define HAS_TIMES /**/
+
+/* Fpos_t:
+ * This symbol holds the type used to declare file positions in libc.
+ * It can be fpos_t, long, uint, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
+ */
+#define Fpos_t fpos_t /* File position type */
+
+/* Gid_t_f:
+ * This symbol defines the format string used for printing a Gid_t.
+ */
+#define Gid_t_f "u" /**/
+
+/* Gid_t_sign:
+ * This symbol holds the signedess of a Gid_t.
+ * 1 for unsigned, -1 for signed.
+ */
+#define Gid_t_sign 1 /* GID sign */
+
+/* Gid_t_size:
+ * This symbol holds the size of a Gid_t in bytes.
+ */
+#define Gid_t_size 4 /* GID size */
+
+/* Gid_t:
+ * This symbol holds the return type of getgid() and the type of
+ * argument to setrgid() and related functions. Typically,
+ * it is the type of group ids in the kernel. It can be int, ushort,
+ * gid_t, etc... It may be necessary to include <sys/types.h> to get
+ * any typedef'ed information.
+ */
+#define Gid_t gid_t /* Type for getgid(), etc... */
+
+/* Off_t:
+ * This symbol holds the type used to declare offsets in the kernel.
+ * It can be int, long, off_t, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
+ */
+/* LSEEKSIZE:
+ * This symbol holds the number of bytes used by the Off_t.
+ */
+/* Off_t_size:
+ * This symbol holds the number of bytes used by the Off_t.
+ */
+#define Off_t off_t /* <offset> type */
+#define LSEEKSIZE 8 /* <offset> size */
+#define Off_t_size 8 /* <offset> size */
+
+/* Mode_t:
+ * This symbol holds the type used to declare file modes
+ * for systems calls. It is usually mode_t, but may be
+ * int or unsigned short. It may be necessary to include <sys/types.h>
+ * to get any typedef'ed information.
+ */
+#define Mode_t mode_t /* file mode parameter for system calls */
+
+/* Pid_t:
+ * This symbol holds the type used to declare process ids in the kernel.
+ * It can be int, uint, pid_t, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
+ */
+#define Pid_t pid_t /* PID type */
+
+/* Size_t_size:
+ * This symbol holds the size of a Size_t in bytes.
+ */
+#define Size_t_size 8 /* */
+
+/* Size_t:
+ * This symbol holds the type used to declare length parameters
+ * for string functions. It is usually size_t, but may be
+ * unsigned long, int, etc. It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
+ */
+#define Size_t size_t /* length paramater for string functions */
+
+/* Uid_t_f:
+ * This symbol defines the format string used for printing a Uid_t.
+ */
+#define Uid_t_f "u" /**/
+
+/* Uid_t_sign:
+ * This symbol holds the signedess of a Uid_t.
+ * 1 for unsigned, -1 for signed.
+ */
+#define Uid_t_sign 1 /* UID sign */
+
+/* Uid_t_size:
+ * This symbol holds the size of a Uid_t in bytes.
+ */
+#define Uid_t_size 4 /* UID size */
+
+/* Uid_t:
+ * This symbol holds the type used to declare user ids in the kernel.
+ * It can be int, ushort, uid_t, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
+ */
+#define Uid_t uid_t /* UID type */
+
#endif
*/
#define LOC_SED "$full_sed" /**/
-/* HAS_MSYNC:
- * This symbol, if defined, indicates that the msync system call is
- * available to synchronize a mapped file.
+/* HAS_ALARM:
+ * This symbol, if defined, indicates that the alarm routine is
+ * available.
*/
-#$d_msync HAS_MSYNC /**/
+#$d_alarm HAS_ALARM /**/
-/* HAS_MUNMAP:
- * This symbol, if defined, indicates that the munmap system call is
- * available to unmap a region, usually mapped by mmap().
+/* HAS_BCMP:
+ * This symbol is defined if the bcmp() routine is available to
+ * compare blocks of memory.
*/
-#$d_munmap HAS_MUNMAP /**/
+#$d_bcmp HAS_BCMP /**/
-/* HAS_NICE:
- * This symbol, if defined, indicates that the nice routine is
- * available.
+/* HAS_BCOPY:
+ * This symbol is defined if the bcopy() routine is available to
+ * copy blocks of memory.
*/
-#$d_nice HAS_NICE /**/
+#$d_bcopy HAS_BCOPY /**/
-/* HAS_PATHCONF:
- * This symbol, if defined, indicates that pathconf() is available
- * to determine file-system related limits and options associated
- * with a given filename.
- */
-/* HAS_FPATHCONF:
- * This symbol, if defined, indicates that pathconf() is available
- * to determine file-system related limits and options associated
- * with a given open file descriptor.
+/* HAS_BZERO:
+ * This symbol is defined if the bzero() routine is available to
+ * set a memory block to 0.
*/
-#$d_pathconf HAS_PATHCONF /**/
-#$d_fpathconf HAS_FPATHCONF /**/
+#$d_bzero HAS_BZERO /**/
-/* HAS_PAUSE:
- * This symbol, if defined, indicates that the pause routine is
- * available to suspend a process until a signal is received.
+/* HAS_CHOWN:
+ * This symbol, if defined, indicates that the chown routine is
+ * available.
*/
-#$d_pause HAS_PAUSE /**/
+#$d_chown HAS_CHOWN /**/
-/* HAS_PIPE:
- * This symbol, if defined, indicates that the pipe routine is
- * available to create an inter-process channel.
+/* HAS_CHROOT:
+ * This symbol, if defined, indicates that the chroot routine is
+ * available.
*/
-#$d_pipe HAS_PIPE /**/
+#$d_chroot HAS_CHROOT /**/
-/* HAS_POLL:
- * This symbol, if defined, indicates that the poll routine is
- * available to poll active file descriptors. You may safely
- * include <poll.h> when this symbol is defined.
+/* HAS_CHSIZE:
+ * This symbol, if defined, indicates that the chsize routine is available
+ * to truncate files. You might need a -lx to get this routine.
*/
-#$d_poll HAS_POLL /**/
+#$d_chsize HAS_CHSIZE /**/
-/* HAS_READDIR:
- * This symbol, if defined, indicates that the readdir routine is
- * available to read directory entries. You may have to include
- * <dirent.h>. See I_DIRENT.
+/* HASCONST:
+ * This symbol, if defined, indicates that this C compiler knows about
+ * the const type. There is no need to actually test for that symbol
+ * within your programs. The mere use of the "const" keyword will
+ * trigger the necessary tests.
*/
-#$d_readdir HAS_READDIR /**/
+#$d_const HASCONST /**/
+#ifndef HASCONST
+#define const
+#endif
-/* HAS_SEEKDIR:
- * This symbol, if defined, indicates that the seekdir routine is
- * available. You may have to include <dirent.h>. See I_DIRENT.
+/* HAS_CUSERID:
+ * This symbol, if defined, indicates that the cuserid routine is
+ * available to get character login names.
*/
-#$d_seekdir HAS_SEEKDIR /**/
+#$d_cuserid HAS_CUSERID /**/
-/* HAS_TELLDIR:
- * This symbol, if defined, indicates that the telldir routine is
- * available. You may have to include <dirent.h>. See I_DIRENT.
+/* HAS_DBL_DIG:
+ * This symbol, if defined, indicates that this system's <float.h>
+ * or <limits.h> defines the symbol DBL_DIG, which is the number
+ * of significant digits in a double precision number. If this
+ * symbol is not defined, a guess of 15 is usually pretty good.
*/
-#$d_telldir HAS_TELLDIR /**/
+#$d_dbl_dig HAS_DBL_DIG /* */
-/* HAS_REWINDDIR:
- * This symbol, if defined, indicates that the rewinddir routine is
- * available. You may have to include <dirent.h>. See I_DIRENT.
+/* HAS_DIFFTIME:
+ * This symbol, if defined, indicates that the difftime routine is
+ * available.
*/
-#$d_rewinddir HAS_REWINDDIR /**/
+#$d_difftime HAS_DIFFTIME /**/
-/* HAS_READLINK:
- * This symbol, if defined, indicates that the readlink routine is
- * available to read the value of a symbolic link.
+/* HAS_DLERROR:
+ * This symbol, if defined, indicates that the dlerror routine is
+ * available to return a string describing the last error that
+ * occurred from a call to dlopen(), dlclose() or dlsym().
*/
-#$d_readlink HAS_READLINK /**/
+#$d_dlerror HAS_DLERROR /**/
-/* HAS_RENAME:
- * This symbol, if defined, indicates that the rename routine is available
- * to rename files. Otherwise you should do the unlink(), link(), unlink()
- * trick.
+/* HAS_DUP2:
+ * This symbol, if defined, indicates that the dup2 routine is
+ * available to duplicate file descriptors.
*/
-#$d_rename HAS_RENAME /**/
+#$d_dup2 HAS_DUP2 /**/
-/* HAS_RMDIR:
- * This symbol, if defined, indicates that the rmdir routine is
- * available to remove directories. Otherwise you should fork off a
- * new process to exec /bin/rmdir.
+/* HAS_FCHMOD:
+ * This symbol, if defined, indicates that the fchmod routine is available
+ * to change mode of opened files. If unavailable, use chmod().
*/
-#$d_rmdir HAS_RMDIR /**/
+#$d_fchmod HAS_FCHMOD /**/
-/* HAS_SELECT:
- * This symbol, if defined, indicates that the select routine is
- * available to select active file descriptors. If the timeout field
- * is used, <sys/time.h> may need to be included.
+/* HAS_FCHOWN:
+ * This symbol, if defined, indicates that the fchown routine is available
+ * to change ownership of opened files. If unavailable, use chown().
*/
-#$d_select HAS_SELECT /**/
+#$d_fchown HAS_FCHOWN /**/
-/* HAS_SETEGID:
- * This symbol, if defined, indicates that the setegid routine is available
- * to change the effective gid of the current program.
+/* HAS_FCNTL:
+ * This symbol, if defined, indicates to the C program that
+ * the fcntl() function exists.
*/
-#$d_setegid HAS_SETEGID /**/
+#$d_fcntl HAS_FCNTL /**/
-/* HAS_SETEUID:
- * This symbol, if defined, indicates that the seteuid routine is available
- * to change the effective uid of the current program.
+/* HAS_FGETPOS:
+ * This symbol, if defined, indicates that the fgetpos routine is
+ * available to get the file position indicator, similar to ftell().
*/
-#$d_seteuid HAS_SETEUID /**/
+#$d_fgetpos HAS_FGETPOS /**/
-/* HAS_SETLINEBUF:
- * This symbol, if defined, indicates that the setlinebuf routine is
- * available to change stderr or stdout from block-buffered or unbuffered
- * to a line-buffered mode.
+/* HAS_FLOCK:
+ * This symbol, if defined, indicates that the flock routine is
+ * available to do file locking.
*/
-#$d_setlinebuf HAS_SETLINEBUF /**/
+#$d_flock HAS_FLOCK /**/
-/* HAS_SETLOCALE:
- * This symbol, if defined, indicates that the setlocale routine is
- * available to handle locale-specific ctype implementations.
+/* HAS_FORK:
+ * This symbol, if defined, indicates that the fork routine is
+ * available.
*/
-#$d_setlocale HAS_SETLOCALE /**/
+#$d_fork HAS_FORK /**/
-/* HAS_SETPGID:
- * This symbol, if defined, indicates that the setpgid(pid, gpid)
- * routine is available to set process group ID.
+/* HAS_FSETPOS:
+ * This symbol, if defined, indicates that the fsetpos routine is
+ * available to set the file position indicator, similar to fseek().
*/
-#$d_setpgid HAS_SETPGID /**/
+#$d_fsetpos HAS_FSETPOS /**/
-/* HAS_SETPGRP2:
- * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX)
- * routine is available to set the current process group.
+/* HAS_GETTIMEOFDAY:
+ * This symbol, if defined, indicates that the gettimeofday() system
+ * call is available for a sub-second accuracy clock. Usually, the file
+ * <sys/resource.h> needs to be included (see I_SYS_RESOURCE).
+ * The type "Timeval" should be used to refer to "struct timeval".
*/
-#$d_setpgrp2 HAS_SETPGRP2 /**/
+#$d_gettimeod HAS_GETTIMEOFDAY /**/
+#ifdef HAS_GETTIMEOFDAY
+#define Timeval struct timeval /* Structure used by gettimeofday() */
+#endif
-/* HAS_SETPRIORITY:
- * This symbol, if defined, indicates that the setpriority routine is
- * available to set a process's priority.
+/* HAS_GETGROUPS:
+ * This symbol, if defined, indicates that the getgroups() routine is
+ * available to get the list of process groups. If unavailable, multiple
+ * groups are probably not supported.
*/
-#$d_setprior HAS_SETPRIORITY /**/
+#$d_getgrps HAS_GETGROUPS /**/
-/* HAS_SETREGID:
- * This symbol, if defined, indicates that the setregid routine is
- * available to change the real and effective gid of the current
- * process.
- */
-/* HAS_SETRESGID:
- * This symbol, if defined, indicates that the setresgid routine is
- * available to change the real, effective and saved gid of the current
- * process.
+/* HAS_GETLOGIN:
+ * This symbol, if defined, indicates that the getlogin routine is
+ * available to get the login name.
*/
-#$d_setregid HAS_SETREGID /**/
-#$d_setresgid HAS_SETRESGID /**/
+#$d_getlogin HAS_GETLOGIN /**/
-/* HAS_SETREUID:
- * This symbol, if defined, indicates that the setreuid routine is
- * available to change the real and effective uid of the current
- * process.
- */
-/* HAS_SETRESUID:
- * This symbol, if defined, indicates that the setresuid routine is
- * available to change the real, effective and saved uid of the current
- * process.
+/* HAS_GETPGID:
+ * This symbol, if defined, indicates to the C program that
+ * the getpgid(pid) function is available to get the
+ * process group id.
*/
-#$d_setreuid HAS_SETREUID /**/
-#$d_setresuid HAS_SETRESUID /**/
+#$d_getpgid HAS_GETPGID /**/
-/* HAS_SETRGID:
- * This symbol, if defined, indicates that the setrgid routine is available
- * to change the real gid of the current program.
+/* HAS_GETPGRP2:
+ * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX)
+ * routine is available to get the current process group.
*/
-#$d_setrgid HAS_SETRGID /**/
+#$d_getpgrp2 HAS_GETPGRP2 /**/
-/* HAS_SETRUID:
- * This symbol, if defined, indicates that the setruid routine is available
- * to change the real uid of the current program.
+/* HAS_GETPPID:
+ * This symbol, if defined, indicates that the getppid routine is
+ * available to get the parent process ID.
*/
-#$d_setruid HAS_SETRUID /**/
+#$d_getppid HAS_GETPPID /**/
-/* HAS_SETSID:
- * This symbol, if defined, indicates that the setsid routine is
- * available to set the process group ID.
+/* HAS_GETPRIORITY:
+ * This symbol, if defined, indicates that the getpriority routine is
+ * available to get a process's priority.
*/
-#$d_setsid HAS_SETSID /**/
+#$d_getprior HAS_GETPRIORITY /**/
-/* HAS_STRCHR:
- * This symbol is defined to indicate that the strchr()/strrchr()
- * functions are available for string searching. If not, try the
- * index()/rindex() pair.
- */
-/* HAS_INDEX:
- * This symbol is defined to indicate that the index()/rindex()
- * functions are available for string searching.
+/* HAS_INET_ATON:
+ * This symbol, if defined, indicates to the C program that the
+ * inet_aton() function is available to parse IP address "dotted-quad"
+ * strings.
*/
-#$d_strchr HAS_STRCHR /**/
-#$d_index HAS_INDEX /**/
+#$d_inetaton HAS_INET_ATON /**/
-/* HAS_STRCOLL:
- * This symbol, if defined, indicates that the strcoll routine is
- * available to compare strings using collating information.
+/* HAS_KILLPG:
+ * This symbol, if defined, indicates that the killpg routine is available
+ * to kill process groups. If unavailable, you probably should use kill
+ * with a negative process number.
*/
-#$d_strcoll HAS_STRCOLL /**/
+#$d_killpg HAS_KILLPG /**/
-/* USE_STRUCT_COPY:
- * This symbol, if defined, indicates that this C compiler knows how
- * to copy structures. If undefined, you'll need to use a block copy
- * routine of some sort instead.
+/* HAS_LINK:
+ * This symbol, if defined, indicates that the link routine is
+ * available to create hard links.
*/
-#$d_strctcpy USE_STRUCT_COPY /**/
+#$d_link HAS_LINK /**/
-/* HAS_STRTOD:
- * This symbol, if defined, indicates that the strtod routine is
- * available to provide better numeric string conversion than atof().
+/* HAS_LOCALECONV:
+ * This symbol, if defined, indicates that the localeconv routine is
+ * available for numeric and monetary formatting conventions.
*/
-#$d_strtod HAS_STRTOD /**/
+#$d_locconv HAS_LOCALECONV /**/
-/* HAS_STRTOL:
- * This symbol, if defined, indicates that the strtol routine is available
- * to provide better numeric string conversion than atoi() and friends.
+/* HAS_LOCKF:
+ * This symbol, if defined, indicates that the lockf routine is
+ * available to do file locking.
*/
-#$d_strtol HAS_STRTOL /**/
+#$d_lockf HAS_LOCKF /**/
-/* HAS_STRXFRM:
- * This symbol, if defined, indicates that the strxfrm() routine is
- * available to transform strings.
+/* HAS_LSTAT:
+ * This symbol, if defined, indicates that the lstat routine is
+ * available to do file stats on symbolic links.
*/
-#$d_strxfrm HAS_STRXFRM /**/
+#$d_lstat HAS_LSTAT /**/
-/* HAS_SYMLINK:
- * This symbol, if defined, indicates that the symlink routine is available
- * to create symbolic links.
+/* HAS_MBLEN:
+ * This symbol, if defined, indicates that the mblen routine is available
+ * to find the number of bytes in a multibye character.
*/
-#$d_symlink HAS_SYMLINK /**/
+#$d_mblen HAS_MBLEN /**/
-/* HAS_SYSCALL:
- * This symbol, if defined, indicates that the syscall routine is
- * available to call arbitrary system calls. If undefined, that's tough.
+/* HAS_MBSTOWCS:
+ * This symbol, if defined, indicates that the mbstowcs routine is
+ * available to covert a multibyte string into a wide character string.
*/
-#$d_syscall HAS_SYSCALL /**/
+#$d_mbstowcs HAS_MBSTOWCS /**/
-/* HAS_SYSCONF:
- * This symbol, if defined, indicates that sysconf() is available
- * to determine system related limits and options.
+/* HAS_MBTOWC:
+ * This symbol, if defined, indicates that the mbtowc routine is available
+ * to covert a multibyte to a wide character.
*/
-#$d_sysconf HAS_SYSCONF /**/
+#$d_mbtowc HAS_MBTOWC /**/
-/* HAS_SYSTEM:
- * This symbol, if defined, indicates that the system routine is
- * available to issue a shell command.
+/* HAS_MEMCMP:
+ * This symbol, if defined, indicates that the memcmp routine is available
+ * to compare blocks of memory.
*/
-#$d_system HAS_SYSTEM /**/
+#$d_memcmp HAS_MEMCMP /**/
-/* HAS_TCGETPGRP:
- * This symbol, if defined, indicates that the tcgetpgrp routine is
- * available to get foreground process group ID.
+/* HAS_MEMCPY:
+ * This symbol, if defined, indicates that the memcpy routine is available
+ * to copy blocks of memory.
*/
-#$d_tcgetpgrp HAS_TCGETPGRP /**/
+#$d_memcpy HAS_MEMCPY /**/
-/* HAS_TCSETPGRP:
- * This symbol, if defined, indicates that the tcsetpgrp routine is
- * available to set foreground process group ID.
+/* HAS_MEMMOVE:
+ * This symbol, if defined, indicates that the memmove routine is available
+ * to copy potentially overlapping blocks of memory. This should be used
+ * only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your
+ * own version.
*/
-#$d_tcsetpgrp HAS_TCSETPGRP /**/
+#$d_memmove HAS_MEMMOVE /**/
-/* HAS_TRUNCATE:
- * This symbol, if defined, indicates that the truncate routine is
- * available to truncate files.
+/* HAS_MEMSET:
+ * This symbol, if defined, indicates that the memset routine is available
+ * to set blocks of memory.
*/
-#$d_truncate HAS_TRUNCATE /**/
+#$d_memset HAS_MEMSET /**/
-/* HAS_TZNAME:
- * This symbol, if defined, indicates that the tzname[] array is
- * available to access timezone names.
+/* HAS_MKDIR:
+ * This symbol, if defined, indicates that the mkdir routine is available
+ * to create directories. Otherwise you should fork off a new process to
+ * exec /bin/mkdir.
*/
-#$d_tzname HAS_TZNAME /**/
+#$d_mkdir HAS_MKDIR /**/
-/* HAS_UMASK:
- * This symbol, if defined, indicates that the umask routine is
- * available to set and get the value of the file creation mask.
+/* HAS_MKFIFO:
+ * This symbol, if defined, indicates that the mkfifo routine is
+ * available to create FIFOs. Otherwise, mknod should be able to
+ * do it for you. However, if mkfifo is there, mknod might require
+ * super-user privileges which mkfifo will not.
*/
-#$d_umask HAS_UMASK /**/
+#$d_mkfifo HAS_MKFIFO /**/
-/* HAS_USLEEP:
- * This symbol, if defined, indicates that the usleep routine is
- * available to let the process sleep on a sub-second accuracy.
+/* HAS_MKTIME:
+ * This symbol, if defined, indicates that the mktime routine is
+ * available.
*/
-#$d_usleep HAS_USLEEP /**/
+#$d_mktime HAS_MKTIME /**/
-/* HASVOLATILE:
- * This symbol, if defined, indicates that this C compiler knows about
- * the volatile declaration.
+/* HAS_MSYNC:
+ * This symbol, if defined, indicates that the msync system call is
+ * available to synchronize a mapped file.
*/
-#$d_volatile HASVOLATILE /**/
-#ifndef HASVOLATILE
-#define volatile
-#endif
+#$d_msync HAS_MSYNC /**/
-/* HAS_WAIT4:
- * This symbol, if defined, indicates that wait4() exists.
+/* HAS_MUNMAP:
+ * This symbol, if defined, indicates that the munmap system call is
+ * available to unmap a region, usually mapped by mmap().
*/
-#$d_wait4 HAS_WAIT4 /**/
+#$d_munmap HAS_MUNMAP /**/
-/* HAS_WAITPID:
- * This symbol, if defined, indicates that the waitpid routine is
- * available to wait for child process.
+/* HAS_NICE:
+ * This symbol, if defined, indicates that the nice routine is
+ * available.
*/
-#$d_waitpid HAS_WAITPID /**/
+#$d_nice HAS_NICE /**/
-/* HAS_WCSTOMBS:
- * This symbol, if defined, indicates that the wcstombs routine is
- * available to convert wide character strings to multibyte strings.
+/* HAS_PATHCONF:
+ * This symbol, if defined, indicates that pathconf() is available
+ * to determine file-system related limits and options associated
+ * with a given filename.
*/
-#$d_wcstombs HAS_WCSTOMBS /**/
-
-/* HAS_WCTOMB:
- * This symbol, if defined, indicates that the wctomb routine is available
- * to covert a wide character to a multibyte.
+/* HAS_FPATHCONF:
+ * This symbol, if defined, indicates that pathconf() is available
+ * to determine file-system related limits and options associated
+ * with a given open file descriptor.
*/
-#$d_wctomb HAS_WCTOMB /**/
+#$d_pathconf HAS_PATHCONF /**/
+#$d_fpathconf HAS_FPATHCONF /**/
-/* I_ARPA_INET:
- * This symbol, if defined, indicates to the C program that it should
- * include <arpa/inet.h> to get inet_addr and friends declarations.
+/* HAS_PAUSE:
+ * This symbol, if defined, indicates that the pause routine is
+ * available to suspend a process until a signal is received.
*/
-#$i_arpainet I_ARPA_INET /**/
+#$d_pause HAS_PAUSE /**/
-/* I_DBM:
- * This symbol, if defined, indicates that <dbm.h> exists and should
- * be included.
- */
-/* I_RPCSVC_DBM:
- * This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and
- * should be included.
+/* HAS_PIPE:
+ * This symbol, if defined, indicates that the pipe routine is
+ * available to create an inter-process channel.
*/
-#$i_dbm I_DBM /**/
-#$i_rpcsvcdbm I_RPCSVC_DBM /**/
+#$d_pipe HAS_PIPE /**/
-/* I_DIRENT:
- * This symbol, if defined, indicates to the C program that it should
- * include <dirent.h>. Using this symbol also triggers the definition
- * of the Direntry_t define which ends up being 'struct dirent' or
- * 'struct direct' depending on the availability of <dirent.h>.
- */
-/* DIRNAMLEN:
- * This symbol, if defined, indicates to the C program that the length
- * of directory entry names is provided by a d_namlen field. Otherwise
- * you need to do strlen() on the d_name field.
- */
-/* Direntry_t:
- * This symbol is set to 'struct direct' or 'struct dirent' depending on
- * whether dirent is available or not. You should use this pseudo type to
- * portably declare your directory entries.
+/* HAS_POLL:
+ * This symbol, if defined, indicates that the poll routine is
+ * available to poll active file descriptors. You may safely
+ * include <poll.h> when this symbol is defined.
*/
-#$i_dirent I_DIRENT /**/
-#$d_dirnamlen DIRNAMLEN /**/
-#define Direntry_t $direntrytype
+#$d_poll HAS_POLL /**/
-/* I_DLFCN:
- * This symbol, if defined, indicates that <dlfcn.h> exists and should
- * be included.
+/* HAS_READDIR:
+ * This symbol, if defined, indicates that the readdir routine is
+ * available to read directory entries. You may have to include
+ * <dirent.h>. See I_DIRENT.
*/
-#$i_dlfcn I_DLFCN /**/
+#$d_readdir HAS_READDIR /**/
-/* I_FCNTL:
- * This manifest constant tells the C program to include <fcntl.h>.
+/* HAS_SEEKDIR:
+ * This symbol, if defined, indicates that the seekdir routine is
+ * available. You may have to include <dirent.h>. See I_DIRENT.
*/
-#$i_fcntl I_FCNTL /**/
+#$d_seekdir HAS_SEEKDIR /**/
-/* I_FLOAT:
- * This symbol, if defined, indicates to the C program that it should
- * include <float.h> to get definition of symbols like DBL_MAX or
- * DBL_MIN, i.e. machine dependent floating point values.
+/* HAS_TELLDIR:
+ * This symbol, if defined, indicates that the telldir routine is
+ * available. You may have to include <dirent.h>. See I_DIRENT.
*/
-#$i_float I_FLOAT /**/
+#$d_telldir HAS_TELLDIR /**/
-/* I_LIMITS:
- * This symbol, if defined, indicates to the C program that it should
- * include <limits.h> to get definition of symbols like WORD_BIT or
- * LONG_MAX, i.e. machine dependant limitations.
+/* HAS_REWINDDIR:
+ * This symbol, if defined, indicates that the rewinddir routine is
+ * available. You may have to include <dirent.h>. See I_DIRENT.
*/
-#$i_limits I_LIMITS /**/
+#$d_rewinddir HAS_REWINDDIR /**/
-/* I_LOCALE:
- * This symbol, if defined, indicates to the C program that it should
- * include <locale.h>.
+/* HAS_READLINK:
+ * This symbol, if defined, indicates that the readlink routine is
+ * available to read the value of a symbolic link.
*/
-#$i_locale I_LOCALE /**/
+#$d_readlink HAS_READLINK /**/
-/* I_MATH:
- * This symbol, if defined, indicates to the C program that it should
- * include <math.h>.
+/* HAS_RENAME:
+ * This symbol, if defined, indicates that the rename routine is available
+ * to rename files. Otherwise you should do the unlink(), link(), unlink()
+ * trick.
*/
-#$i_math I_MATH /**/
+#$d_rename HAS_RENAME /**/
-/* I_MEMORY:
- * This symbol, if defined, indicates to the C program that it should
- * include <memory.h>.
+/* HAS_RMDIR:
+ * This symbol, if defined, indicates that the rmdir routine is
+ * available to remove directories. Otherwise you should fork off a
+ * new process to exec /bin/rmdir.
*/
-#$i_memory I_MEMORY /**/
+#$d_rmdir HAS_RMDIR /**/
-/* I_NET_ERRNO:
- * This symbol, if defined, indicates that <net/errno.h> exists and
- * should be included.
+/* HAS_SELECT:
+ * This symbol, if defined, indicates that the select routine is
+ * available to select active file descriptors. If the timeout field
+ * is used, <sys/time.h> may need to be included.
*/
-#$i_neterrno I_NET_ERRNO /**/
+#$d_select HAS_SELECT /**/
-/* I_NETINET_IN:
- * This symbol, if defined, indicates to the C program that it should
- * include <netinet/in.h>. Otherwise, you may try <sys/in.h>.
+/* HAS_SETEGID:
+ * This symbol, if defined, indicates that the setegid routine is available
+ * to change the effective gid of the current program.
*/
-#$i_niin I_NETINET_IN /**/
+#$d_setegid HAS_SETEGID /**/
-/* I_SFIO:
- * This symbol, if defined, indicates to the C program that it should
- * include <sfio.h>.
+/* HAS_SETEUID:
+ * This symbol, if defined, indicates that the seteuid routine is available
+ * to change the effective uid of the current program.
*/
-#$i_sfio I_SFIO /**/
+#$d_seteuid HAS_SETEUID /**/
-/* I_STDDEF:
- * This symbol, if defined, indicates that <stddef.h> exists and should
- * be included.
+/* HAS_SETLINEBUF:
+ * This symbol, if defined, indicates that the setlinebuf routine is
+ * available to change stderr or stdout from block-buffered or unbuffered
+ * to a line-buffered mode.
*/
-#$i_stddef I_STDDEF /**/
+#$d_setlinebuf HAS_SETLINEBUF /**/
-/* I_STDLIB:
- * This symbol, if defined, indicates that <stdlib.h> exists and should
- * be included.
+/* HAS_SETLOCALE:
+ * This symbol, if defined, indicates that the setlocale routine is
+ * available to handle locale-specific ctype implementations.
*/
-#$i_stdlib I_STDLIB /**/
+#$d_setlocale HAS_SETLOCALE /**/
-/* I_STRING:
- * This symbol, if defined, indicates to the C program that it should
- * include <string.h> (USG systems) instead of <strings.h> (BSD systems).
+/* HAS_SETPGID:
+ * This symbol, if defined, indicates that the setpgid(pid, gpid)
+ * routine is available to set process group ID.
*/
-#$i_string I_STRING /**/
+#$d_setpgid HAS_SETPGID /**/
-/* I_SYS_DIR:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/dir.h>.
+/* HAS_SETPGRP2:
+ * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX)
+ * routine is available to set the current process group.
*/
-#$i_sysdir I_SYS_DIR /**/
+#$d_setpgrp2 HAS_SETPGRP2 /**/
-/* I_SYS_FILE:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/file.h> to get definition of R_OK and friends.
+/* HAS_SETPRIORITY:
+ * This symbol, if defined, indicates that the setpriority routine is
+ * available to set a process's priority.
*/
-#$i_sysfile I_SYS_FILE /**/
+#$d_setprior HAS_SETPRIORITY /**/
-/* I_SYS_IOCTL:
- * This symbol, if defined, indicates that <sys/ioctl.h> exists and should
- * be included. Otherwise, include <sgtty.h> or <termio.h>.
+/* HAS_SETREGID:
+ * This symbol, if defined, indicates that the setregid routine is
+ * available to change the real and effective gid of the current
+ * process.
*/
-/* I_SYS_SOCKIO:
- * This symbol, if defined, indicates the <sys/sockio.h> should be included
- * to get socket ioctl options, like SIOCATMARK.
+/* HAS_SETRESGID:
+ * This symbol, if defined, indicates that the setresgid routine is
+ * available to change the real, effective and saved gid of the current
+ * process.
*/
-#$i_sysioctl I_SYS_IOCTL /**/
-#$i_syssockio I_SYS_SOCKIO /**/
+#$d_setregid HAS_SETREGID /**/
+#$d_setresgid HAS_SETRESGID /**/
-/* I_SYS_NDIR:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/ndir.h>.
+/* HAS_SETREUID:
+ * This symbol, if defined, indicates that the setreuid routine is
+ * available to change the real and effective uid of the current
+ * process.
*/
-#$i_sysndir I_SYS_NDIR /**/
-
-/* I_SYS_PARAM:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/param.h>.
+/* HAS_SETRESUID:
+ * This symbol, if defined, indicates that the setresuid routine is
+ * available to change the real, effective and saved uid of the current
+ * process.
*/
-#$i_sysparam I_SYS_PARAM /**/
+#$d_setreuid HAS_SETREUID /**/
+#$d_setresuid HAS_SETRESUID /**/
-/* I_SYS_RESOURCE:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/resource.h>.
+/* HAS_SETRGID:
+ * This symbol, if defined, indicates that the setrgid routine is available
+ * to change the real gid of the current program.
*/
-#$i_sysresrc I_SYS_RESOURCE /**/
+#$d_setrgid HAS_SETRGID /**/
-/* I_SYS_SELECT:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/select.h> in order to get definition of struct timeval.
+/* HAS_SETRUID:
+ * This symbol, if defined, indicates that the setruid routine is available
+ * to change the real uid of the current program.
*/
-#$i_sysselct I_SYS_SELECT /**/
+#$d_setruid HAS_SETRUID /**/
-/* I_SYS_STAT:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/stat.h>.
+/* HAS_SETSID:
+ * This symbol, if defined, indicates that the setsid routine is
+ * available to set the process group ID.
*/
-#$i_sysstat I_SYS_STAT /**/
+#$d_setsid HAS_SETSID /**/
-/* I_SYS_TIMES:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/times.h>.
+/* HAS_STRCHR:
+ * This symbol is defined to indicate that the strchr()/strrchr()
+ * functions are available for string searching. If not, try the
+ * index()/rindex() pair.
*/
-#$i_systimes I_SYS_TIMES /**/
-
-/* I_SYS_TYPES:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/types.h>.
+/* HAS_INDEX:
+ * This symbol is defined to indicate that the index()/rindex()
+ * functions are available for string searching.
*/
-#$i_systypes I_SYS_TYPES /**/
+#$d_strchr HAS_STRCHR /**/
+#$d_index HAS_INDEX /**/
-/* I_SYS_UN:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/un.h> to get UNIX domain socket definitions.
+/* HAS_STRCOLL:
+ * This symbol, if defined, indicates that the strcoll routine is
+ * available to compare strings using collating information.
*/
-#$i_sysun I_SYS_UN /**/
+#$d_strcoll HAS_STRCOLL /**/
-/* I_SYS_WAIT:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/wait.h>.
+/* USE_STRUCT_COPY:
+ * This symbol, if defined, indicates that this C compiler knows how
+ * to copy structures. If undefined, you'll need to use a block copy
+ * routine of some sort instead.
*/
-#$i_syswait I_SYS_WAIT /**/
+#$d_strctcpy USE_STRUCT_COPY /**/
-/* I_TERMIO:
- * This symbol, if defined, indicates that the program should include
- * <termio.h> rather than <sgtty.h>. There are also differences in
- * the ioctl() calls that depend on the value of this symbol.
- */
-/* I_TERMIOS:
- * This symbol, if defined, indicates that the program should include
- * the POSIX termios.h rather than sgtty.h or termio.h.
- * There are also differences in the ioctl() calls that depend on the
- * value of this symbol.
- */
-/* I_SGTTY:
- * This symbol, if defined, indicates that the program should include
- * <sgtty.h> rather than <termio.h>. There are also differences in
- * the ioctl() calls that depend on the value of this symbol.
+/* HAS_STRTOD:
+ * This symbol, if defined, indicates that the strtod routine is
+ * available to provide better numeric string conversion than atof().
*/
-#$i_termio I_TERMIO /**/
-#$i_termios I_TERMIOS /**/
-#$i_sgtty I_SGTTY /**/
+#$d_strtod HAS_STRTOD /**/
-/* I_UNISTD:
- * This symbol, if defined, indicates to the C program that it should
- * include <unistd.h>.
+/* HAS_STRTOL:
+ * This symbol, if defined, indicates that the strtol routine is available
+ * to provide better numeric string conversion than atoi() and friends.
*/
-#$i_unistd I_UNISTD /**/
+#$d_strtol HAS_STRTOL /**/
-/* I_UTIME:
- * This symbol, if defined, indicates to the C program that it should
- * include <utime.h>.
+/* HAS_STRXFRM:
+ * This symbol, if defined, indicates that the strxfrm() routine is
+ * available to transform strings.
*/
-#$i_utime I_UTIME /**/
+#$d_strxfrm HAS_STRXFRM /**/
-/* I_VALUES:
- * This symbol, if defined, indicates to the C program that it should
- * include <values.h> to get definition of symbols like MINFLOAT or
- * MAXLONG, i.e. machine dependant limitations. Probably, you
- * should use <limits.h> instead, if it is available.
+/* HAS_SYMLINK:
+ * This symbol, if defined, indicates that the symlink routine is available
+ * to create symbolic links.
*/
-#$i_values I_VALUES /**/
+#$d_symlink HAS_SYMLINK /**/
-/* I_VFORK:
- * This symbol, if defined, indicates to the C program that it should
- * include vfork.h.
+/* HAS_SYSCALL:
+ * This symbol, if defined, indicates that the syscall routine is
+ * available to call arbitrary system calls. If undefined, that's tough.
*/
-#$i_vfork I_VFORK /**/
+#$d_syscall HAS_SYSCALL /**/
-/* INTSIZE:
- * This symbol contains the value of sizeof(int) so that the C
- * preprocessor can make decisions based on it.
- */
-/* LONGSIZE:
- * This symbol contains the value of sizeof(long) so that the C
- * preprocessor can make decisions based on it.
+/* HAS_SYSCONF:
+ * This symbol, if defined, indicates that sysconf() is available
+ * to determine system related limits and options.
*/
-/* SHORTSIZE:
- * This symbol contains the value of sizeof(short) so that the C
- * preprocessor can make decisions based on it.
+#$d_sysconf HAS_SYSCONF /**/
+
+/* HAS_SYSTEM:
+ * This symbol, if defined, indicates that the system routine is
+ * available to issue a shell command.
*/
-#define INTSIZE $intsize /**/
-#define LONGSIZE $longsize /**/
-#define SHORTSIZE $shortsize /**/
+#$d_system HAS_SYSTEM /**/
-/* MULTIARCH:
- * This symbol, if defined, signifies that the build
- * process will produce some binary files that are going to be
- * used in a cross-platform environment. This is the case for
- * example with the NeXT "fat" binaries that contain executables
- * for several CPUs.
+/* HAS_TCGETPGRP:
+ * This symbol, if defined, indicates that the tcgetpgrp routine is
+ * available to get foreground process group ID.
*/
-#$multiarch MULTIARCH /**/
+#$d_tcgetpgrp HAS_TCGETPGRP /**/
-/* HAS_QUAD:
- * This symbol, if defined, tells that there's a 64-bit integer type,
- * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one
- * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T.
+/* HAS_TCSETPGRP:
+ * This symbol, if defined, indicates that the tcsetpgrp routine is
+ * available to set foreground process group ID.
*/
-#$d_quad HAS_QUAD /**/
-#ifdef HAS_QUAD
-# define Quad_t $quadtype /**/
-# define Uquad_t $uquadtype /**/
-# define QUADKIND $quadkind /**/
-# define QUAD_IS_INT 1
-# define QUAD_IS_LONG 2
-# define QUAD_IS_LONG_LONG 3
-# define QUAD_IS_INT64_T 4
-#endif
+#$d_tcsetpgrp HAS_TCSETPGRP /**/
-/* HAS_ACCESSX:
- * This symbol, if defined, indicates that the accessx routine is
- * available to do extended access checks.
+/* HAS_TRUNCATE:
+ * This symbol, if defined, indicates that the truncate routine is
+ * available to truncate files.
*/
-#$d_accessx HAS_ACCESSX /**/
+#$d_truncate HAS_TRUNCATE /**/
-/* HAS_EACCESS:
- * This symbol, if defined, indicates that the eaccess routine is
- * available to do extended access checks.
+/* HAS_TZNAME:
+ * This symbol, if defined, indicates that the tzname[] array is
+ * available to access timezone names.
*/
-#$d_eaccess HAS_EACCESS /**/
+#$d_tzname HAS_TZNAME /**/
-/* I_SYS_ACCESS:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/access.h>.
+/* HAS_UMASK:
+ * This symbol, if defined, indicates that the umask routine is
+ * available to set and get the value of the file creation mask.
*/
-#$i_sysaccess I_SYS_ACCESS /**/
+#$d_umask HAS_UMASK /**/
-/* I_SYS_SECURITY:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/security.h>.
+/* HAS_USLEEP:
+ * This symbol, if defined, indicates that the usleep routine is
+ * available to let the process sleep on a sub-second accuracy.
*/
-#$i_syssecrt I_SYS_SECURITY /**/
+#$d_usleep HAS_USLEEP /**/
-/* MEM_ALIGNBYTES:
- * This symbol contains the number of bytes required to align a
- * double, or a long double when applicable. Usual values are 2,
- * 4 and 8. The default is eight, for safety.
+/* HASVOLATILE:
+ * This symbol, if defined, indicates that this C compiler knows about
+ * the volatile declaration.
*/
-#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH)
-# define MEM_ALIGNBYTES 8
-#else
-#define MEM_ALIGNBYTES $alignbytes
+#$d_volatile HASVOLATILE /**/
+#ifndef HASVOLATILE
+#define volatile
#endif
-/* BYTEORDER:
- * This symbol holds the hexadecimal constant defined in byteorder,
- * in a UV, i.e. 0x1234 or 0x4321 or 0x12345678, etc...
- * If the compiler supports cross-compiling or multiple-architecture
- * binaries (eg. on NeXT systems), use compiler-defined macros to
- * determine the byte order.
- * On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture
- * Binaries (MAB) on either big endian or little endian machines.
- * The endian-ness is available at compile-time. This only matters
- * for perl, where the config.h can be generated and installed on
- * one system, and used by a different architecture to build an
- * extension. Older versions of NeXT that might not have
- * defined either *_ENDIAN__ were all on Motorola 680x0 series,
- * so the default case (for NeXT) is big endian to catch them.
- * This might matter for NeXT 3.0.
+/* HAS_WAIT4:
+ * This symbol, if defined, indicates that wait4() exists.
*/
-#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH)
-# ifdef __LITTLE_ENDIAN__
-# if LONGSIZE == 4
-# define BYTEORDER 0x1234
-# else
-# if LONGSIZE == 8
-# define BYTEORDER 0x12345678
-# endif
-# endif
-# else
-# ifdef __BIG_ENDIAN__
-# if LONGSIZE == 4
-# define BYTEORDER 0x4321
-# else
-# if LONGSIZE == 8
-# define BYTEORDER 0x87654321
-# endif
-# endif
-# endif
-# endif
-# if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__))
-# define BYTEORDER 0x4321
-# endif
-#else
-#define BYTEORDER 0x$byteorder /* large digits for MSB */
-#endif /* NeXT */
+#$d_wait4 HAS_WAIT4 /**/
-/* CASTI32:
- * This symbol is defined if the C compiler can cast negative
- * or large floating point numbers to 32-bit ints.
+/* HAS_WAITPID:
+ * This symbol, if defined, indicates that the waitpid routine is
+ * available to wait for child process.
*/
-#$d_casti32 CASTI32 /**/
+#$d_waitpid HAS_WAITPID /**/
-/* CASTNEGFLOAT:
- * This symbol is defined if the C compiler can cast negative
- * numbers to unsigned longs, ints and shorts.
- */
-/* CASTFLAGS:
- * This symbol contains flags that say what difficulties the compiler
- * has casting odd floating values to unsigned long:
- * 0 = ok
- * 1 = couldn't cast < 0
- * 2 = couldn't cast >= 0x80000000
- * 4 = couldn't cast in argument expression list
+/* HAS_WCSTOMBS:
+ * This symbol, if defined, indicates that the wcstombs routine is
+ * available to convert wide character strings to multibyte strings.
*/
-#$d_castneg CASTNEGFLOAT /**/
-#define CASTFLAGS $castflags /**/
+#$d_wcstombs HAS_WCSTOMBS /**/
-/* VOID_CLOSEDIR:
- * This symbol, if defined, indicates that the closedir() routine
- * does not return a value.
+/* HAS_WCTOMB:
+ * This symbol, if defined, indicates that the wctomb routine is available
+ * to covert a wide character to a multibyte.
*/
-#$d_void_closedir VOID_CLOSEDIR /**/
+#$d_wctomb HAS_WCTOMB /**/
-/* HAS_FD_SET:
- * This symbol, when defined, indicates presence of the fd_set typedef
- * in <sys/types.h>
+/* I_ARPA_INET:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <arpa/inet.h> to get inet_addr and friends declarations.
*/
-#$d_fd_set HAS_FD_SET /**/
+#$i_arpainet I_ARPA_INET /**/
-/* Gconvert:
- * This preprocessor macro is defined to convert a floating point
- * number to a string without a trailing decimal point. This
- * emulates the behavior of sprintf("%g"), but is sometimes much more
- * efficient. If gconvert() is not available, but gcvt() drops the
- * trailing decimal point, then gcvt() is used. If all else fails,
- * a macro using sprintf("%g") is used. Arguments for the Gconvert
- * macro are: value, number of digits, whether trailing zeros should
- * be retained, and the output buffer.
- * The usual values are:
- * d_Gconvert='gconvert((x),(n),(t),(b))'
- * d_Gconvert='gcvt((x),(n),(b))'
- * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
- * The last two assume trailing zeros should not be kept.
+/* I_DBM:
+ * This symbol, if defined, indicates that <dbm.h> exists and should
+ * be included.
*/
-#define Gconvert(x,n,t,b) $d_Gconvert
-
-/* HAS_GETPAGESIZE:
- * This symbol, if defined, indicates that the getpagesize system call
- * is available to get system page size, which is the granularity of
- * many memory management calls.
+/* I_RPCSVC_DBM:
+ * This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and
+ * should be included.
*/
-#$d_getpagsz HAS_GETPAGESIZE /**/
+#$i_dbm I_DBM /**/
+#$i_rpcsvcdbm I_RPCSVC_DBM /**/
-/* HAS_GNULIBC:
- * This symbol, if defined, indicates to the C program that
- * the GNU C library is being used. A better check is to use
- * the __GLIBC__ and __GLIBC_MINOR__ symbols supplied with glibc.
+/* I_DIRENT:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <dirent.h>. Using this symbol also triggers the definition
+ * of the Direntry_t define which ends up being 'struct dirent' or
+ * 'struct direct' depending on the availability of <dirent.h>.
*/
-#$d_gnulibc HAS_GNULIBC /**/
-#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
-# define _GNU_SOURCE
-#endif
-/* HAS_ISASCII:
- * This manifest constant lets the C program know that isascii
- * is available.
+/* DIRNAMLEN:
+ * This symbol, if defined, indicates to the C program that the length
+ * of directory entry names is provided by a d_namlen field. Otherwise
+ * you need to do strlen() on the d_name field.
*/
-#$d_isascii HAS_ISASCII /**/
+/* Direntry_t:
+ * This symbol is set to 'struct direct' or 'struct dirent' depending on
+ * whether dirent is available or not. You should use this pseudo type to
+ * portably declare your directory entries.
+ */
+#$i_dirent I_DIRENT /**/
+#$d_dirnamlen DIRNAMLEN /**/
+#define Direntry_t $direntrytype
-/* HAS_LCHOWN:
- * This symbol, if defined, indicates that the lchown routine is
- * available to operate on a symbolic link (instead of following the
- * link).
+/* I_DLFCN:
+ * This symbol, if defined, indicates that <dlfcn.h> exists and should
+ * be included.
*/
-#$d_lchown HAS_LCHOWN /**/
+#$i_dlfcn I_DLFCN /**/
-/* HAS_OPEN3:
- * This manifest constant lets the C program know that the three
- * argument form of open(2) is available.
+/* I_FCNTL:
+ * This manifest constant tells the C program to include <fcntl.h>.
*/
-#$d_open3 HAS_OPEN3 /**/
+#$i_fcntl I_FCNTL /**/
-/* HAS_SAFE_BCOPY:
- * This symbol, if defined, indicates that the bcopy routine is available
- * to copy potentially overlapping memory blocks. Normally, you should
- * probably use memmove() or memcpy(). If neither is defined, roll your
- * own version.
+/* I_FLOAT:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <float.h> to get definition of symbols like DBL_MAX or
+ * DBL_MIN, i.e. machine dependent floating point values.
*/
-#$d_safebcpy HAS_SAFE_BCOPY /**/
+#$i_float I_FLOAT /**/
-/* HAS_SAFE_MEMCPY:
- * This symbol, if defined, indicates that the memcpy routine is available
- * to copy potentially overlapping memory blocks. If you need to
- * copy overlapping memory blocks, you should check HAS_MEMMOVE and
- * use memmove() instead, if available.
+/* I_LIMITS:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <limits.h> to get definition of symbols like WORD_BIT or
+ * LONG_MAX, i.e. machine dependant limitations.
*/
-#$d_safemcpy HAS_SAFE_MEMCPY /**/
+#$i_limits I_LIMITS /**/
-/* HAS_SANE_MEMCMP:
- * This symbol, if defined, indicates that the memcmp routine is available
- * and can be used to compare relative magnitudes of chars with their high
- * bits set. If it is not defined, roll your own version.
+/* I_LOCALE:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <locale.h>.
*/
-#$d_sanemcmp HAS_SANE_MEMCMP /**/
+#$i_locale I_LOCALE /**/
-/* HAS_SIGACTION:
- * This symbol, if defined, indicates that Vr4's sigaction() routine
- * is available.
+/* I_MATH:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <math.h>.
*/
-#$d_sigaction HAS_SIGACTION /**/
+#$i_math I_MATH /**/
-/* HAS_SIGSETJMP:
- * This variable indicates to the C program that the sigsetjmp()
- * routine is available to save the calling process's registers
- * and stack environment for later use by siglongjmp(), and
- * to optionally save the process's signal mask. See
- * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
- */
-/* Sigjmp_buf:
- * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
- */
-/* Sigsetjmp:
- * This macro is used in the same way as sigsetjmp(), but will invoke
- * traditional setjmp() if sigsetjmp isn't available.
- * See HAS_SIGSETJMP.
+/* I_MEMORY:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <memory.h>.
*/
-/* Siglongjmp:
- * This macro is used in the same way as siglongjmp(), but will invoke
- * traditional longjmp() if siglongjmp isn't available.
- * See HAS_SIGSETJMP.
+#$i_memory I_MEMORY /**/
+
+/* I_NET_ERRNO:
+ * This symbol, if defined, indicates that <net/errno.h> exists and
+ * should be included.
*/
-#$d_sigsetjmp HAS_SIGSETJMP /**/
-#ifdef HAS_SIGSETJMP
-#define Sigjmp_buf sigjmp_buf
-#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
-#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
-#else
-#define Sigjmp_buf jmp_buf
-#define Sigsetjmp(buf,save_mask) setjmp((buf))
-#define Siglongjmp(buf,retval) longjmp((buf),(retval))
-#endif
+#$i_neterrno I_NET_ERRNO /**/
-/* USE_STDIO_PTR:
- * This symbol is defined if the _ptr and _cnt fields (or similar)
- * of the stdio FILE structure can be used to access the stdio buffer
- * for a file handle. If this is defined, then the FILE_ptr(fp)
- * and FILE_cnt(fp) macros will also be defined and should be used
- * to access these fields.
+/* I_NETINET_IN:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <netinet/in.h>. Otherwise, you may try <sys/in.h>.
*/
-/* FILE_ptr:
- * This macro is used to access the _ptr field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_PTR is defined.
+#$i_niin I_NETINET_IN /**/
+
+/* I_SFIO:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sfio.h>.
*/
-/* STDIO_PTR_LVALUE:
- * This symbol is defined if the FILE_ptr macro can be used as an
- * lvalue.
+#$i_sfio I_SFIO /**/
+
+/* I_STDDEF:
+ * This symbol, if defined, indicates that <stddef.h> exists and should
+ * be included.
*/
-/* FILE_cnt:
- * This macro is used to access the _cnt field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_PTR is defined.
+#$i_stddef I_STDDEF /**/
+
+/* I_STDLIB:
+ * This symbol, if defined, indicates that <stdlib.h> exists and should
+ * be included.
*/
-/* STDIO_CNT_LVALUE:
- * This symbol is defined if the FILE_cnt macro can be used as an
- * lvalue.
+#$i_stdlib I_STDLIB /**/
+
+/* I_STRING:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <string.h> (USG systems) instead of <strings.h> (BSD systems).
*/
-/* STDIO_PTR_LVAL_SETS_CNT:
- * This symbol is defined if using the FILE_ptr macro as an lvalue
- * to increase the pointer by n has the side effect of decreasing the
- * value of File_cnt(fp) by n.
+#$i_string I_STRING /**/
+
+/* I_SYS_DIR:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/dir.h>.
*/
-/* STDIO_PTR_LVAL_NOCHANGE_CNT:
- * This symbol is defined if using the FILE_ptr macro as an lvalue
- * to increase the pointer by n leaves File_cnt(fp) unchanged.
+#$i_sysdir I_SYS_DIR /**/
+
+/* I_SYS_FILE:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/file.h> to get definition of R_OK and friends.
*/
-#$d_stdstdio USE_STDIO_PTR /**/
-#ifdef USE_STDIO_PTR
-#define FILE_ptr(fp) $stdio_ptr
-#$d_stdio_ptr_lval STDIO_PTR_LVALUE /**/
-#define FILE_cnt(fp) $stdio_cnt
-#$d_stdio_cnt_lval STDIO_CNT_LVALUE /**/
-#$d_stdio_ptr_lval_sets_cnt STDIO_PTR_LVAL_SETS_CNT /**/
-#$d_stdio_ptr_lval_nochange_cnt STDIO_PTR_LVAL_NOCHANGE_CNT /**/
-#endif
+#$i_sysfile I_SYS_FILE /**/
-/* USE_STDIO_BASE:
- * This symbol is defined if the _base field (or similar) of the
- * stdio FILE structure can be used to access the stdio buffer for
- * a file handle. If this is defined, then the FILE_base(fp) macro
- * will also be defined and should be used to access this field.
- * Also, the FILE_bufsiz(fp) macro will be defined and should be used
- * to determine the number of bytes in the buffer. USE_STDIO_BASE
- * will never be defined unless USE_STDIO_PTR is.
+/* I_SYS_IOCTL:
+ * This symbol, if defined, indicates that <sys/ioctl.h> exists and should
+ * be included. Otherwise, include <sgtty.h> or <termio.h>.
*/
-/* FILE_base:
- * This macro is used to access the _base field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_BASE is defined.
+/* I_SYS_SOCKIO:
+ * This symbol, if defined, indicates the <sys/sockio.h> should be included
+ * to get socket ioctl options, like SIOCATMARK.
*/
-/* FILE_bufsiz:
- * This macro is used to determine the number of bytes in the I/O
- * buffer pointed to by _base field (or equivalent) of the FILE
- * structure pointed to its argument. This macro will always be defined
- * if USE_STDIO_BASE is defined.
+#$i_sysioctl I_SYS_IOCTL /**/
+#$i_syssockio I_SYS_SOCKIO /**/
+
+/* I_SYS_NDIR:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/ndir.h>.
*/
-#$d_stdiobase USE_STDIO_BASE /**/
-#ifdef USE_STDIO_BASE
-#define FILE_base(fp) $stdio_base
-#define FILE_bufsiz(fp) $stdio_bufsiz
-#endif
+#$i_sysndir I_SYS_NDIR /**/
-/* HAS_VPRINTF:
- * This symbol, if defined, indicates that the vprintf routine is available
- * to printf with a pointer to an argument list. If unavailable, you
- * may need to write your own, probably in terms of _doprnt().
+/* I_SYS_PARAM:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/param.h>.
*/
-/* USE_CHAR_VSPRINTF:
- * This symbol is defined if this system has vsprintf() returning type
- * (char*). The trend seems to be to declare it as "int vsprintf()". It
- * is up to the package author to declare vsprintf correctly based on the
- * symbol.
+#$i_sysparam I_SYS_PARAM /**/
+
+/* I_SYS_RESOURCE:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/resource.h>.
*/
-#$d_vprintf HAS_VPRINTF /**/
-#$d_charvspr USE_CHAR_VSPRINTF /**/
+#$i_sysresrc I_SYS_RESOURCE /**/
-/* DOUBLESIZE:
- * This symbol contains the size of a double, so that the C preprocessor
- * can make decisions based on it.
+/* I_SYS_SELECT:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/select.h> in order to get definition of struct timeval.
*/
-#define DOUBLESIZE $doublesize /**/
+#$i_sysselct I_SYS_SELECT /**/
-/* I_TIME:
+/* I_SYS_STAT:
* This symbol, if defined, indicates to the C program that it should
- * include <time.h>.
+ * include <sys/stat.h>.
*/
-/* I_SYS_TIME:
+#$i_sysstat I_SYS_STAT /**/
+
+/* I_SYS_TIMES:
* This symbol, if defined, indicates to the C program that it should
- * include <sys/time.h>.
+ * include <sys/times.h>.
*/
-/* I_SYS_TIME_KERNEL:
+#$i_systimes I_SYS_TIMES /**/
+
+/* I_SYS_TYPES:
* This symbol, if defined, indicates to the C program that it should
- * include <sys/time.h> with KERNEL defined.
+ * include <sys/types.h>.
*/
-/* HAS_TM_TM_ZONE:
- * This symbol, if defined, indicates to the C program that
- * the struct tm has a tm_zone field.
+#$i_systypes I_SYS_TYPES /**/
+
+/* I_SYS_UN:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/un.h> to get UNIX domain socket definitions.
*/
-/* HAS_TM_TM_GMTOFF:
- * This symbol, if defined, indicates to the C program that
- * the struct tm has a tm_gmtoff field.
+#$i_sysun I_SYS_UN /**/
+
+/* I_SYS_WAIT:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/wait.h>.
*/
-#$i_time I_TIME /**/
-#$i_systime I_SYS_TIME /**/
-#$i_systimek I_SYS_TIME_KERNEL /**/
-#$d_tm_tm_zone HAS_TM_TM_ZONE /**/
-#$d_tm_tm_gmtoff HAS_TM_TM_GMTOFF /**/
+#$i_syswait I_SYS_WAIT /**/
-/* VAL_O_NONBLOCK:
- * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
- * non-blocking I/O for the file descriptor. Note that there is no way
- * back, i.e. you cannot turn it blocking again this way. If you wish to
- * alternatively switch between blocking and non-blocking, use the
- * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
+/* I_TERMIO:
+ * This symbol, if defined, indicates that the program should include
+ * <termio.h> rather than <sgtty.h>. There are also differences in
+ * the ioctl() calls that depend on the value of this symbol.
*/
-/* VAL_EAGAIN:
- * This symbol holds the errno error code set by read() when no data was
- * present on the non-blocking file descriptor.
+/* I_TERMIOS:
+ * This symbol, if defined, indicates that the program should include
+ * the POSIX termios.h rather than sgtty.h or termio.h.
+ * There are also differences in the ioctl() calls that depend on the
+ * value of this symbol.
*/
-/* RD_NODATA:
- * This symbol holds the return code from read() when no data is present
- * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
- * not defined, then you can't distinguish between no data and EOF by
- * issuing a read(). You'll have to find another way to tell for sure!
+/* I_SGTTY:
+ * This symbol, if defined, indicates that the program should include
+ * <sgtty.h> rather than <termio.h>. There are also differences in
+ * the ioctl() calls that depend on the value of this symbol.
*/
-/* EOF_NONBLOCK:
- * This symbol, if defined, indicates to the C program that a read() on
- * a non-blocking file descriptor will return 0 on EOF, and not the value
- * held in RD_NODATA (-1 usually, in that case!).
+#$i_termio I_TERMIO /**/
+#$i_termios I_TERMIOS /**/
+#$i_sgtty I_SGTTY /**/
+
+/* I_UNISTD:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <unistd.h>.
*/
-#define VAL_O_NONBLOCK $o_nonblock
-#define VAL_EAGAIN $eagain
-#define RD_NODATA $rd_nodata
-#$d_eofnblk EOF_NONBLOCK
+#$i_unistd I_UNISTD /**/
-/* PTRSIZE:
- * This symbol contains the size of a pointer, so that the C preprocessor
- * can make decisions based on it. It will be sizeof(void *) if
- * the compiler supports (void *); otherwise it will be
- * sizeof(char *).
+/* I_UTIME:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <utime.h>.
*/
-#define PTRSIZE $ptrsize /**/
+#$i_utime I_UTIME /**/
-/* Drand01:
- * This macro is to be used to generate uniformly distributed
- * random numbers over the range [0., 1.[. You may have to supply
- * an 'extern double drand48();' in your program since SunOS 4.1.3
- * doesn't provide you with anything relevant in its headers.
- * See HAS_DRAND48_PROTO.
+/* I_VALUES:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <values.h> to get definition of symbols like MINFLOAT or
+ * MAXLONG, i.e. machine dependant limitations. Probably, you
+ * should use <limits.h> instead, if it is available.
*/
-/* Rand_seed_t:
- * This symbol defines the type of the argument of the
- * random seed function.
+#$i_values I_VALUES /**/
+
+/* I_VFORK:
+ * This symbol, if defined, indicates to the C program that it should
+ * include vfork.h.
*/
-/* seedDrand01:
- * This symbol defines the macro to be used in seeding the
- * random number generator (see Drand01).
+#$i_vfork I_VFORK /**/
+
+/* INTSIZE:
+ * This symbol contains the value of sizeof(int) so that the C
+ * preprocessor can make decisions based on it.
*/
-/* RANDBITS:
- * This symbol indicates how many bits are produced by the
- * function used to generate normalized random numbers.
- * Values include 15, 16, 31, and 48.
+/* LONGSIZE:
+ * This symbol contains the value of sizeof(long) so that the C
+ * preprocessor can make decisions based on it.
*/
-#define Drand01() $drand01 /**/
-#define Rand_seed_t $randseedtype /**/
-#define seedDrand01(x) $seedfunc((Rand_seed_t)x) /**/
-#define RANDBITS $randbits /**/
-
-/* SSize_t:
- * This symbol holds the type used by functions that return
- * a count of bytes or an error condition. It must be a signed type.
- * It is usually ssize_t, but may be long or int, etc.
- * It may be necessary to include <sys/types.h> or <unistd.h>
- * to get any typedef'ed information.
- * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
+/* SHORTSIZE:
+ * This symbol contains the value of sizeof(short) so that the C
+ * preprocessor can make decisions based on it.
*/
-#define SSize_t $ssizetype /* signed count of bytes */
+#define INTSIZE $intsize /**/
+#define LONGSIZE $longsize /**/
+#define SHORTSIZE $shortsize /**/
-/* HAS_ALARM:
- * This symbol, if defined, indicates that the alarm routine is
- * available.
+/* MULTIARCH:
+ * This symbol, if defined, signifies that the build
+ * process will produce some binary files that are going to be
+ * used in a cross-platform environment. This is the case for
+ * example with the NeXT "fat" binaries that contain executables
+ * for several CPUs.
*/
-#$d_alarm HAS_ALARM /**/
+#$multiarch MULTIARCH /**/
-/* HASATTRIBUTE:
- * This symbol indicates the C compiler can check for function attributes,
- * such as printf formats. This is normally only supported by GNU cc.
+/* HAS_QUAD:
+ * This symbol, if defined, tells that there's a 64-bit integer type,
+ * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one
+ * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T.
*/
-#$d_attribut HASATTRIBUTE /**/
-#ifndef HASATTRIBUTE
-#define __attribute__(_arg_)
+#$d_quad HAS_QUAD /**/
+#ifdef HAS_QUAD
+# define Quad_t $quadtype /**/
+# define Uquad_t $uquadtype /**/
+# define QUADKIND $quadkind /**/
+# define QUAD_IS_INT 1
+# define QUAD_IS_LONG 2
+# define QUAD_IS_LONG_LONG 3
+# define QUAD_IS_INT64_T 4
#endif
-/* HAS_BCMP:
- * This symbol is defined if the bcmp() routine is available to
- * compare blocks of memory.
+/* HAS_ACCESSX:
+ * This symbol, if defined, indicates that the accessx routine is
+ * available to do extended access checks.
*/
-#$d_bcmp HAS_BCMP /**/
+#$d_accessx HAS_ACCESSX /**/
-/* HAS_BCOPY:
- * This symbol is defined if the bcopy() routine is available to
- * copy blocks of memory.
+/* HAS_EACCESS:
+ * This symbol, if defined, indicates that the eaccess routine is
+ * available to do extended access checks.
*/
-#$d_bcopy HAS_BCOPY /**/
+#$d_eaccess HAS_EACCESS /**/
-/* HAS_BZERO:
- * This symbol is defined if the bzero() routine is available to
- * set a memory block to 0.
+/* I_SYS_ACCESS:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/access.h>.
*/
-#$d_bzero HAS_BZERO /**/
+#$i_sysaccess I_SYS_ACCESS /**/
-/* HAS_CHOWN:
- * This symbol, if defined, indicates that the chown routine is
- * available.
+/* I_SYS_SECURITY:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/security.h>.
*/
-#$d_chown HAS_CHOWN /**/
+#$i_syssecrt I_SYS_SECURITY /**/
-/* HAS_CHROOT:
- * This symbol, if defined, indicates that the chroot routine is
- * available.
+/* MEM_ALIGNBYTES:
+ * This symbol contains the number of bytes required to align a
+ * double, or a long double when applicable. Usual values are 2,
+ * 4 and 8. The default is eight, for safety.
*/
-#$d_chroot HAS_CHROOT /**/
+#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH)
+# define MEM_ALIGNBYTES 8
+#else
+#define MEM_ALIGNBYTES $alignbytes
+#endif
-/* HAS_CHSIZE:
- * This symbol, if defined, indicates that the chsize routine is available
- * to truncate files. You might need a -lx to get this routine.
+/* BYTEORDER:
+ * This symbol holds the hexadecimal constant defined in byteorder,
+ * in a UV, i.e. 0x1234 or 0x4321 or 0x12345678, etc...
+ * If the compiler supports cross-compiling or multiple-architecture
+ * binaries (eg. on NeXT systems), use compiler-defined macros to
+ * determine the byte order.
+ * On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture
+ * Binaries (MAB) on either big endian or little endian machines.
+ * The endian-ness is available at compile-time. This only matters
+ * for perl, where the config.h can be generated and installed on
+ * one system, and used by a different architecture to build an
+ * extension. Older versions of NeXT that might not have
+ * defined either *_ENDIAN__ were all on Motorola 680x0 series,
+ * so the default case (for NeXT) is big endian to catch them.
+ * This might matter for NeXT 3.0.
*/
-#$d_chsize HAS_CHSIZE /**/
+#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH)
+# ifdef __LITTLE_ENDIAN__
+# if LONGSIZE == 4
+# define BYTEORDER 0x1234
+# else
+# if LONGSIZE == 8
+# define BYTEORDER 0x12345678
+# endif
+# endif
+# else
+# ifdef __BIG_ENDIAN__
+# if LONGSIZE == 4
+# define BYTEORDER 0x4321
+# else
+# if LONGSIZE == 8
+# define BYTEORDER 0x87654321
+# endif
+# endif
+# endif
+# endif
+# if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__))
+# define BYTEORDER 0x4321
+# endif
+#else
+#define BYTEORDER 0x$byteorder /* large digits for MSB */
+#endif /* NeXT */
-/* HASCONST:
- * This symbol, if defined, indicates that this C compiler knows about
- * the const type. There is no need to actually test for that symbol
- * within your programs. The mere use of the "const" keyword will
- * trigger the necessary tests.
+/* CASTI32:
+ * This symbol is defined if the C compiler can cast negative
+ * or large floating point numbers to 32-bit ints.
*/
-#$d_const HASCONST /**/
-#ifndef HASCONST
-#define const
-#endif
+#$d_casti32 CASTI32 /**/
-/* HAS_CUSERID:
- * This symbol, if defined, indicates that the cuserid routine is
- * available to get character login names.
+/* CASTNEGFLOAT:
+ * This symbol is defined if the C compiler can cast negative
+ * numbers to unsigned longs, ints and shorts.
*/
-#$d_cuserid HAS_CUSERID /**/
+/* CASTFLAGS:
+ * This symbol contains flags that say what difficulties the compiler
+ * has casting odd floating values to unsigned long:
+ * 0 = ok
+ * 1 = couldn't cast < 0
+ * 2 = couldn't cast >= 0x80000000
+ * 4 = couldn't cast in argument expression list
+ */
+#$d_castneg CASTNEGFLOAT /**/
+#define CASTFLAGS $castflags /**/
-/* HAS_DBL_DIG:
- * This symbol, if defined, indicates that this system's <float.h>
- * or <limits.h> defines the symbol DBL_DIG, which is the number
- * of significant digits in a double precision number. If this
- * symbol is not defined, a guess of 15 is usually pretty good.
+/* VOID_CLOSEDIR:
+ * This symbol, if defined, indicates that the closedir() routine
+ * does not return a value.
*/
-#$d_dbl_dig HAS_DBL_DIG /* */
+#$d_void_closedir VOID_CLOSEDIR /**/
-/* HAS_DIFFTIME:
- * This symbol, if defined, indicates that the difftime routine is
- * available.
+/* HAS_FD_SET:
+ * This symbol, when defined, indicates presence of the fd_set typedef
+ * in <sys/types.h>
*/
-#$d_difftime HAS_DIFFTIME /**/
+#$d_fd_set HAS_FD_SET /**/
-/* HAS_DLERROR:
- * This symbol, if defined, indicates that the dlerror routine is
- * available to return a string describing the last error that
- * occurred from a call to dlopen(), dlclose() or dlsym().
+/* Gconvert:
+ * This preprocessor macro is defined to convert a floating point
+ * number to a string without a trailing decimal point. This
+ * emulates the behavior of sprintf("%g"), but is sometimes much more
+ * efficient. If gconvert() is not available, but gcvt() drops the
+ * trailing decimal point, then gcvt() is used. If all else fails,
+ * a macro using sprintf("%g") is used. Arguments for the Gconvert
+ * macro are: value, number of digits, whether trailing zeros should
+ * be retained, and the output buffer.
+ * The usual values are:
+ * d_Gconvert='gconvert((x),(n),(t),(b))'
+ * d_Gconvert='gcvt((x),(n),(b))'
+ * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
+ * The last two assume trailing zeros should not be kept.
*/
-#$d_dlerror HAS_DLERROR /**/
+#define Gconvert(x,n,t,b) $d_Gconvert
-/* HAS_DUP2:
- * This symbol, if defined, indicates that the dup2 routine is
- * available to duplicate file descriptors.
+/* HAS_GETPAGESIZE:
+ * This symbol, if defined, indicates that the getpagesize system call
+ * is available to get system page size, which is the granularity of
+ * many memory management calls.
*/
-#$d_dup2 HAS_DUP2 /**/
+#$d_getpagsz HAS_GETPAGESIZE /**/
-/* HAS_FCHMOD:
- * This symbol, if defined, indicates that the fchmod routine is available
- * to change mode of opened files. If unavailable, use chmod().
+/* HAS_GNULIBC:
+ * This symbol, if defined, indicates to the C program that
+ * the GNU C library is being used. A better check is to use
+ * the __GLIBC__ and __GLIBC_MINOR__ symbols supplied with glibc.
*/
-#$d_fchmod HAS_FCHMOD /**/
+#$d_gnulibc HAS_GNULIBC /**/
+#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
+# define _GNU_SOURCE
+#endif
+/* HAS_ISASCII:
+ * This manifest constant lets the C program know that isascii
+ * is available.
+ */
+#$d_isascii HAS_ISASCII /**/
-/* HAS_FCHOWN:
- * This symbol, if defined, indicates that the fchown routine is available
- * to change ownership of opened files. If unavailable, use chown().
+/* HAS_LCHOWN:
+ * This symbol, if defined, indicates that the lchown routine is
+ * available to operate on a symbolic link (instead of following the
+ * link).
*/
-#$d_fchown HAS_FCHOWN /**/
+#$d_lchown HAS_LCHOWN /**/
-/* HAS_FCNTL:
- * This symbol, if defined, indicates to the C program that
- * the fcntl() function exists.
+/* HAS_OPEN3:
+ * This manifest constant lets the C program know that the three
+ * argument form of open(2) is available.
*/
-#$d_fcntl HAS_FCNTL /**/
+#$d_open3 HAS_OPEN3 /**/
-/* HAS_FGETPOS:
- * This symbol, if defined, indicates that the fgetpos routine is
- * available to get the file position indicator, similar to ftell().
+/* HAS_SAFE_BCOPY:
+ * This symbol, if defined, indicates that the bcopy routine is available
+ * to copy potentially overlapping memory blocks. Normally, you should
+ * probably use memmove() or memcpy(). If neither is defined, roll your
+ * own version.
*/
-#$d_fgetpos HAS_FGETPOS /**/
+#$d_safebcpy HAS_SAFE_BCOPY /**/
-/* HAS_FLOCK:
- * This symbol, if defined, indicates that the flock routine is
- * available to do file locking.
+/* HAS_SAFE_MEMCPY:
+ * This symbol, if defined, indicates that the memcpy routine is available
+ * to copy potentially overlapping memory blocks. If you need to
+ * copy overlapping memory blocks, you should check HAS_MEMMOVE and
+ * use memmove() instead, if available.
*/
-#$d_flock HAS_FLOCK /**/
+#$d_safemcpy HAS_SAFE_MEMCPY /**/
-/* HAS_FORK:
- * This symbol, if defined, indicates that the fork routine is
- * available.
+/* HAS_SANE_MEMCMP:
+ * This symbol, if defined, indicates that the memcmp routine is available
+ * and can be used to compare relative magnitudes of chars with their high
+ * bits set. If it is not defined, roll your own version.
*/
-#$d_fork HAS_FORK /**/
+#$d_sanemcmp HAS_SANE_MEMCMP /**/
-/* HAS_FSETPOS:
- * This symbol, if defined, indicates that the fsetpos routine is
- * available to set the file position indicator, similar to fseek().
+/* HAS_SIGACTION:
+ * This symbol, if defined, indicates that Vr4's sigaction() routine
+ * is available.
+ */
+#$d_sigaction HAS_SIGACTION /**/
+
+/* HAS_SIGSETJMP:
+ * This variable indicates to the C program that the sigsetjmp()
+ * routine is available to save the calling process's registers
+ * and stack environment for later use by siglongjmp(), and
+ * to optionally save the process's signal mask. See
+ * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
+ */
+/* Sigjmp_buf:
+ * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
+ */
+/* Sigsetjmp:
+ * This macro is used in the same way as sigsetjmp(), but will invoke
+ * traditional setjmp() if sigsetjmp isn't available.
+ * See HAS_SIGSETJMP.
+ */
+/* Siglongjmp:
+ * This macro is used in the same way as siglongjmp(), but will invoke
+ * traditional longjmp() if siglongjmp isn't available.
+ * See HAS_SIGSETJMP.
+ */
+#$d_sigsetjmp HAS_SIGSETJMP /**/
+#ifdef HAS_SIGSETJMP
+#define Sigjmp_buf sigjmp_buf
+#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
+#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
+#else
+#define Sigjmp_buf jmp_buf
+#define Sigsetjmp(buf,save_mask) setjmp((buf))
+#define Siglongjmp(buf,retval) longjmp((buf),(retval))
+#endif
+
+/* USE_STDIO_PTR:
+ * This symbol is defined if the _ptr and _cnt fields (or similar)
+ * of the stdio FILE structure can be used to access the stdio buffer
+ * for a file handle. If this is defined, then the FILE_ptr(fp)
+ * and FILE_cnt(fp) macros will also be defined and should be used
+ * to access these fields.
+ */
+/* FILE_ptr:
+ * This macro is used to access the _ptr field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_PTR is defined.
+ */
+/* STDIO_PTR_LVALUE:
+ * This symbol is defined if the FILE_ptr macro can be used as an
+ * lvalue.
+ */
+/* FILE_cnt:
+ * This macro is used to access the _cnt field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_PTR is defined.
+ */
+/* STDIO_CNT_LVALUE:
+ * This symbol is defined if the FILE_cnt macro can be used as an
+ * lvalue.
+ */
+/* STDIO_PTR_LVAL_SETS_CNT:
+ * This symbol is defined if using the FILE_ptr macro as an lvalue
+ * to increase the pointer by n has the side effect of decreasing the
+ * value of File_cnt(fp) by n.
*/
-#$d_fsetpos HAS_FSETPOS /**/
-
-/* HAS_GETTIMEOFDAY:
- * This symbol, if defined, indicates that the gettimeofday() system
- * call is available for a sub-second accuracy clock. Usually, the file
- * <sys/resource.h> needs to be included (see I_SYS_RESOURCE).
- * The type "Timeval" should be used to refer to "struct timeval".
+/* STDIO_PTR_LVAL_NOCHANGE_CNT:
+ * This symbol is defined if using the FILE_ptr macro as an lvalue
+ * to increase the pointer by n leaves File_cnt(fp) unchanged.
*/
-#$d_gettimeod HAS_GETTIMEOFDAY /**/
-#ifdef HAS_GETTIMEOFDAY
-#define Timeval struct timeval /* Structure used by gettimeofday() */
+#$d_stdstdio USE_STDIO_PTR /**/
+#ifdef USE_STDIO_PTR
+#define FILE_ptr(fp) $stdio_ptr
+#$d_stdio_ptr_lval STDIO_PTR_LVALUE /**/
+#define FILE_cnt(fp) $stdio_cnt
+#$d_stdio_cnt_lval STDIO_CNT_LVALUE /**/
+#$d_stdio_ptr_lval_sets_cnt STDIO_PTR_LVAL_SETS_CNT /**/
+#$d_stdio_ptr_lval_nochange_cnt STDIO_PTR_LVAL_NOCHANGE_CNT /**/
#endif
-/* HAS_GETGROUPS:
- * This symbol, if defined, indicates that the getgroups() routine is
- * available to get the list of process groups. If unavailable, multiple
- * groups are probably not supported.
- */
-#$d_getgrps HAS_GETGROUPS /**/
-
-/* HAS_GETLOGIN:
- * This symbol, if defined, indicates that the getlogin routine is
- * available to get the login name.
+/* USE_STDIO_BASE:
+ * This symbol is defined if the _base field (or similar) of the
+ * stdio FILE structure can be used to access the stdio buffer for
+ * a file handle. If this is defined, then the FILE_base(fp) macro
+ * will also be defined and should be used to access this field.
+ * Also, the FILE_bufsiz(fp) macro will be defined and should be used
+ * to determine the number of bytes in the buffer. USE_STDIO_BASE
+ * will never be defined unless USE_STDIO_PTR is.
*/
-#$d_getlogin HAS_GETLOGIN /**/
-
-/* HAS_GETPGID:
- * This symbol, if defined, indicates to the C program that
- * the getpgid(pid) function is available to get the
- * process group id.
+/* FILE_base:
+ * This macro is used to access the _base field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_BASE is defined.
*/
-#$d_getpgid HAS_GETPGID /**/
-
-/* HAS_GETPGRP2:
- * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX)
- * routine is available to get the current process group.
+/* FILE_bufsiz:
+ * This macro is used to determine the number of bytes in the I/O
+ * buffer pointed to by _base field (or equivalent) of the FILE
+ * structure pointed to its argument. This macro will always be defined
+ * if USE_STDIO_BASE is defined.
*/
-#$d_getpgrp2 HAS_GETPGRP2 /**/
+#$d_stdiobase USE_STDIO_BASE /**/
+#ifdef USE_STDIO_BASE
+#define FILE_base(fp) $stdio_base
+#define FILE_bufsiz(fp) $stdio_bufsiz
+#endif
-/* HAS_GETPPID:
- * This symbol, if defined, indicates that the getppid routine is
- * available to get the parent process ID.
+/* HAS_VPRINTF:
+ * This symbol, if defined, indicates that the vprintf routine is available
+ * to printf with a pointer to an argument list. If unavailable, you
+ * may need to write your own, probably in terms of _doprnt().
*/
-#$d_getppid HAS_GETPPID /**/
-
-/* HAS_GETPRIORITY:
- * This symbol, if defined, indicates that the getpriority routine is
- * available to get a process's priority.
+/* USE_CHAR_VSPRINTF:
+ * This symbol is defined if this system has vsprintf() returning type
+ * (char*). The trend seems to be to declare it as "int vsprintf()". It
+ * is up to the package author to declare vsprintf correctly based on the
+ * symbol.
*/
-#$d_getprior HAS_GETPRIORITY /**/
+#$d_vprintf HAS_VPRINTF /**/
+#$d_charvspr USE_CHAR_VSPRINTF /**/
-/* HAS_INET_ATON:
- * This symbol, if defined, indicates to the C program that the
- * inet_aton() function is available to parse IP address "dotted-quad"
- * strings.
+/* DOUBLESIZE:
+ * This symbol contains the size of a double, so that the C preprocessor
+ * can make decisions based on it.
*/
-#$d_inetaton HAS_INET_ATON /**/
+#define DOUBLESIZE $doublesize /**/
-/* HAS_KILLPG:
- * This symbol, if defined, indicates that the killpg routine is available
- * to kill process groups. If unavailable, you probably should use kill
- * with a negative process number.
+/* I_TIME:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <time.h>.
*/
-#$d_killpg HAS_KILLPG /**/
-
-/* HAS_LINK:
- * This symbol, if defined, indicates that the link routine is
- * available to create hard links.
+/* I_SYS_TIME:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/time.h>.
*/
-#$d_link HAS_LINK /**/
-
-/* HAS_LOCALECONV:
- * This symbol, if defined, indicates that the localeconv routine is
- * available for numeric and monetary formatting conventions.
+/* I_SYS_TIME_KERNEL:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/time.h> with KERNEL defined.
*/
-#$d_locconv HAS_LOCALECONV /**/
-
-/* HAS_LOCKF:
- * This symbol, if defined, indicates that the lockf routine is
- * available to do file locking.
+/* HAS_TM_TM_ZONE:
+ * This symbol, if defined, indicates to the C program that
+ * the struct tm has a tm_zone field.
*/
-#$d_lockf HAS_LOCKF /**/
-
-/* HAS_LSTAT:
- * This symbol, if defined, indicates that the lstat routine is
- * available to do file stats on symbolic links.
+/* HAS_TM_TM_GMTOFF:
+ * This symbol, if defined, indicates to the C program that
+ * the struct tm has a tm_gmtoff field.
*/
-#$d_lstat HAS_LSTAT /**/
+#$i_time I_TIME /**/
+#$i_systime I_SYS_TIME /**/
+#$i_systimek I_SYS_TIME_KERNEL /**/
+#$d_tm_tm_zone HAS_TM_TM_ZONE /**/
+#$d_tm_tm_gmtoff HAS_TM_TM_GMTOFF /**/
-/* HAS_MBLEN:
- * This symbol, if defined, indicates that the mblen routine is available
- * to find the number of bytes in a multibye character.
+/* VAL_O_NONBLOCK:
+ * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
+ * non-blocking I/O for the file descriptor. Note that there is no way
+ * back, i.e. you cannot turn it blocking again this way. If you wish to
+ * alternatively switch between blocking and non-blocking, use the
+ * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
*/
-#$d_mblen HAS_MBLEN /**/
-
-/* HAS_MBSTOWCS:
- * This symbol, if defined, indicates that the mbstowcs routine is
- * available to covert a multibyte string into a wide character string.
+/* VAL_EAGAIN:
+ * This symbol holds the errno error code set by read() when no data was
+ * present on the non-blocking file descriptor.
*/
-#$d_mbstowcs HAS_MBSTOWCS /**/
-
-/* HAS_MBTOWC:
- * This symbol, if defined, indicates that the mbtowc routine is available
- * to covert a multibyte to a wide character.
+/* RD_NODATA:
+ * This symbol holds the return code from read() when no data is present
+ * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
+ * not defined, then you can't distinguish between no data and EOF by
+ * issuing a read(). You'll have to find another way to tell for sure!
*/
-#$d_mbtowc HAS_MBTOWC /**/
-
-/* HAS_MEMCMP:
- * This symbol, if defined, indicates that the memcmp routine is available
- * to compare blocks of memory.
+/* EOF_NONBLOCK:
+ * This symbol, if defined, indicates to the C program that a read() on
+ * a non-blocking file descriptor will return 0 on EOF, and not the value
+ * held in RD_NODATA (-1 usually, in that case!).
*/
-#$d_memcmp HAS_MEMCMP /**/
+#define VAL_O_NONBLOCK $o_nonblock
+#define VAL_EAGAIN $eagain
+#define RD_NODATA $rd_nodata
+#$d_eofnblk EOF_NONBLOCK
-/* HAS_MEMCPY:
- * This symbol, if defined, indicates that the memcpy routine is available
- * to copy blocks of memory.
+/* PTRSIZE:
+ * This symbol contains the size of a pointer, so that the C preprocessor
+ * can make decisions based on it. It will be sizeof(void *) if
+ * the compiler supports (void *); otherwise it will be
+ * sizeof(char *).
*/
-#$d_memcpy HAS_MEMCPY /**/
+#define PTRSIZE $ptrsize /**/
-/* HAS_MEMMOVE:
- * This symbol, if defined, indicates that the memmove routine is available
- * to copy potentially overlapping blocks of memory. This should be used
- * only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your
- * own version.
+/* Drand01:
+ * This macro is to be used to generate uniformly distributed
+ * random numbers over the range [0., 1.[. You may have to supply
+ * an 'extern double drand48();' in your program since SunOS 4.1.3
+ * doesn't provide you with anything relevant in its headers.
+ * See HAS_DRAND48_PROTO.
*/
-#$d_memmove HAS_MEMMOVE /**/
-
-/* HAS_MEMSET:
- * This symbol, if defined, indicates that the memset routine is available
- * to set blocks of memory.
+/* Rand_seed_t:
+ * This symbol defines the type of the argument of the
+ * random seed function.
*/
-#$d_memset HAS_MEMSET /**/
-
-/* HAS_MKDIR:
- * This symbol, if defined, indicates that the mkdir routine is available
- * to create directories. Otherwise you should fork off a new process to
- * exec /bin/mkdir.
+/* seedDrand01:
+ * This symbol defines the macro to be used in seeding the
+ * random number generator (see Drand01).
*/
-#$d_mkdir HAS_MKDIR /**/
-
-/* HAS_MKFIFO:
- * This symbol, if defined, indicates that the mkfifo routine is
- * available to create FIFOs. Otherwise, mknod should be able to
- * do it for you. However, if mkfifo is there, mknod might require
- * super-user privileges which mkfifo will not.
+/* RANDBITS:
+ * This symbol indicates how many bits are produced by the
+ * function used to generate normalized random numbers.
+ * Values include 15, 16, 31, and 48.
*/
-#$d_mkfifo HAS_MKFIFO /**/
+#define Drand01() $drand01 /**/
+#define Rand_seed_t $randseedtype /**/
+#define seedDrand01(x) $seedfunc((Rand_seed_t)x) /**/
+#define RANDBITS $randbits /**/
-/* HAS_MKTIME:
- * This symbol, if defined, indicates that the mktime routine is
- * available.
+/* SSize_t:
+ * This symbol holds the type used by functions that return
+ * a count of bytes or an error condition. It must be a signed type.
+ * It is usually ssize_t, but may be long or int, etc.
+ * It may be necessary to include <sys/types.h> or <unistd.h>
+ * to get any typedef'ed information.
+ * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
*/
-#$d_mktime HAS_MKTIME /**/
+#define SSize_t $ssizetype /* signed count of bytes */
/* EBCDIC:
* This symbol, if defined, indicates that this system uses
*/
#$d_access HAS_ACCESS /**/
+/* HASATTRIBUTE:
+ * This symbol indicates the C compiler can check for function attributes,
+ * such as printf formats. This is normally only supported by GNU cc.
+ */
+#$d_attribut HASATTRIBUTE /**/
+#ifndef HASATTRIBUTE
+#ifdef __attribute__
+#undef __attribute__
+#endif
+#define __attribute__(_arg_)
+#endif
+
/* HAS_CRYPT:
* This symbol, if defined, indicates that the crypt routine is available
* to encrypt passwords and the like.
https://perl5.git.perl.org / perl5.git / commitdiff