First provisional bump to 5.14.0-RC0

diff --git a/Cross/config.sh-arm-linux b/Cross/config.sh-arm-linux
index 68aa7ef..e1caa14 100644 (file)
--- a/Cross/config.sh-arm-linux
+++ b/Cross/config.sh-arm-linux
@@ -32,12 +32,12 @@ alignbytes='4'
 ansi2knr=''
 aphostname='/bin/hostname'
 api_revision='5'
-api_subversion='11'
-api_version='13'
-api_versionstring='5.13.11'
+api_subversion='0'
+api_version='14'
+api_versionstring='5.14.0'
 ar='ar'
-archlib='/usr/lib/perl5/5.13.11/armv4l-linux'
-archlibexp='/usr/lib/perl5/5.13.11/armv4l-linux'
+archlib='/usr/lib/perl5/5.14.0/armv4l-linux'
+archlibexp='/usr/lib/perl5/5.14.0/armv4l-linux'
 archname64=''
 archname='armv4l-linux'
 archobjs=''
@@ -55,7 +55,7 @@ castflags='0'
 cat='cat'
 cc='cc'
 cccdlflags='-fpic'
-ccdlflags='-rdynamic -Wl,-rpath,/usr/lib/perl5/5.13.11/armv4l-linux/CORE'
+ccdlflags='-rdynamic -Wl,-rpath,/usr/lib/perl5/5.14.0/armv4l-linux/CORE'
 ccflags='-fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
 ccflags_uselargefiles='-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
 ccname='arm-linux-gcc'
@@ -724,7 +724,7 @@ inc_version_list=' '
 inc_version_list_init='0'
 incpath=''
 inews=''
-installarchlib='./install_me_here/usr/lib/perl5/5.13.11/armv4l-linux'
+installarchlib='./install_me_here/usr/lib/perl5/5.14.0/armv4l-linux'
 installbin='./install_me_here/usr/bin'
 installhtml1dir=''
 installhtml3dir=''
@@ -732,13 +732,13 @@ installman1dir='./install_me_here/usr/share/man/man1'
 installman3dir='./install_me_here/usr/share/man/man3'
 installprefix='./install_me_here/usr'
 installprefixexp='./install_me_here/usr'
-installprivlib='./install_me_here/usr/lib/perl5/5.13.11'
+installprivlib='./install_me_here/usr/lib/perl5/5.14.0'
 installscript='./install_me_here/usr/bin'
-installsitearch='./install_me_here/usr/lib/perl5/site_perl/5.13.11/armv4l-linux'
+installsitearch='./install_me_here/usr/lib/perl5/site_perl/5.14.0/armv4l-linux'
 installsitebin='./install_me_here/usr/bin'
 installsitehtml1dir=''
 installsitehtml3dir=''
-installsitelib='./install_me_here/usr/lib/perl5/site_perl/5.13.11'
+installsitelib='./install_me_here/usr/lib/perl5/site_perl/5.14.0'
 installsiteman1dir='./install_me_here/usr/share/man/man1'
 installsiteman3dir='./install_me_here/usr/share/man/man3'
 installsitescript='./install_me_here/usr/bin'
@@ -867,8 +867,8 @@ pmake=''
 pr=''
 prefix='/usr'
 prefixexp='/usr'
-privlib='/usr/lib/perl5/5.13.11'
-privlibexp='/usr/lib/perl5/5.13.11'
+privlib='/usr/lib/perl5/5.14.0'
+privlibexp='/usr/lib/perl5/5.14.0'
 procselfexe='"/proc/self/exe"'
 prototype='define'
 ptrsize='4'
@@ -933,17 +933,17 @@ sig_num='0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
 sig_num_init='0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 6, 17, 29, 31, 0'
 sig_size='68'
 signal_t='void'
-sitearch='/usr/lib/perl5/site_perl/5.13.11/armv4l-linux'
-sitearchexp='/usr/lib/perl5/site_perl/5.13.11/armv4l-linux'
+sitearch='/usr/lib/perl5/site_perl/5.14.0/armv4l-linux'
+sitearchexp='/usr/lib/perl5/site_perl/5.14.0/armv4l-linux'
 sitebin='/usr/bin'
 sitebinexp='/usr/bin'
 sitehtml1dir=''
 sitehtml1direxp=''
 sitehtml3dir=''
 sitehtml3direxp=''
-sitelib='/usr/lib/perl5/site_perl/5.13.11'
+sitelib='/usr/lib/perl5/site_perl/5.14.0'
 sitelib_stem='/usr/lib/perl5/site_perl'
-sitelibexp='/usr/lib/perl5/site_perl/5.13.11'
+sitelibexp='/usr/lib/perl5/site_perl/5.14.0'
 siteman1dir='/usr/share/man/man1'
 siteman1direxp='/usr/share/man/man1'
 siteman3dir='/usr/share/man/man3'
@@ -980,7 +980,7 @@ stdio_stream_array=''
 strerror_r_proto='0'
 strings='/usr/include/string.h'
 submit=''
-subversion='11'
+subversion='0'
 sysman='/usr/share/man/man1'
 tail=''
 tar=''
@@ -1068,8 +1068,8 @@ vendorprefix=''
 vendorprefixexp=''
 vendorscript=''
 vendorscriptexp=''
-version='5.13.11'
-version_patchlevel_string='version 13 subversion 11'
+version='5.14.0'
+version_patchlevel_string='version 14 subversion 0'
 versiononly='undef'
 vi=''
 voidflags='15'
@@ -1083,10 +1083,10 @@ config_arg0='Configure'
 config_args=''
 config_argc=0
 PERL_REVISION=5
-PERL_VERSION=13
-PERL_SUBVERSION=11
+PERL_VERSION=14
+PERL_SUBVERSION=0
 PERL_API_REVISION=5
-PERL_API_VERSION=13
-PERL_API_SUBVERSION=11
+PERL_API_VERSION=14
+PERL_API_SUBVERSION=0
 PERL_PATCHLEVEL=
 PERL_CONFIG_SH=true

diff --git a/Cross/config.sh-arm-linux-n770 b/Cross/config.sh-arm-linux-n770
index 1b32a45..fd4b062 100644 (file)
--- a/Cross/config.sh-arm-linux-n770
+++ b/Cross/config.sh-arm-linux-n770
@@ -32,12 +32,12 @@ alignbytes='4'
 ansi2knr=''
 aphostname='/bin/hostname'
 api_revision='5'
-api_subversion='11'
-api_version='13'
-api_versionstring='5.13.11'
+api_subversion='0'
+api_version='14'
+api_versionstring='5.14.0'
 ar='ar'
-archlib='/usr/lib/perl5/5.13.11/armv4l-linux'
-archlibexp='/usr/lib/perl5/5.13.11/armv4l-linux'
+archlib='/usr/lib/perl5/5.14.0/armv4l-linux'
+archlibexp='/usr/lib/perl5/5.14.0/armv4l-linux'
 archname64=''
 archname='armv4l-linux'
 archobjs=''
@@ -55,7 +55,7 @@ castflags='0'
 cat='cat'
 cc='arm-none-linux-gnueabi-gcc'
 cccdlflags='-fpic'
-ccdlflags='-rdynamic -Wl,-rpath,/usr/lib/perl5/5.13.11/armv4l-linux/CORE'
+ccdlflags='-rdynamic -Wl,-rpath,/usr/lib/perl5/5.14.0/armv4l-linux/CORE'
 ccflags='-fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
 ccflags_uselargefiles='-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
 ccname='arm-linux-gcc'
@@ -703,7 +703,7 @@ inc_version_list=' '
 inc_version_list_init='0'
 incpath=''
 inews=''
-installarchlib='./install_me_here/usr/lib/perl5/5.13.11/armv4l-linux'
+installarchlib='./install_me_here/usr/lib/perl5/5.14.0/armv4l-linux'
 installbin='./install_me_here/usr/bin'
 installhtml1dir=''
 installhtml3dir=''
@@ -711,13 +711,13 @@ installman1dir='./install_me_here/usr/share/man/man1'
 installman3dir='./install_me_here/usr/share/man/man3'
 installprefix='./install_me_here/usr'
 installprefixexp='./install_me_here/usr'
-installprivlib='./install_me_here/usr/lib/perl5/5.13.11'
+installprivlib='./install_me_here/usr/lib/perl5/5.14.0'
 installscript='./install_me_here/usr/bin'
-installsitearch='./install_me_here/usr/lib/perl5/site_perl/5.13.11/armv4l-linux'
+installsitearch='./install_me_here/usr/lib/perl5/site_perl/5.14.0/armv4l-linux'
 installsitebin='./install_me_here/usr/bin'
 installsitehtml1dir=''
 installsitehtml3dir=''
-installsitelib='./install_me_here/usr/lib/perl5/site_perl/5.13.11'
+installsitelib='./install_me_here/usr/lib/perl5/site_perl/5.14.0'
 installsiteman1dir='./install_me_here/usr/share/man/man1'
 installsiteman3dir='./install_me_here/usr/share/man/man3'
 installsitescript='./install_me_here/usr/bin'
@@ -845,8 +845,8 @@ pmake=''
 pr=''
 prefix='/usr'
 prefixexp='/usr'
-privlib='/usr/lib/perl5/5.13.11'
-privlibexp='/usr/lib/perl5/5.13.11'
+privlib='/usr/lib/perl5/5.14.0'
+privlibexp='/usr/lib/perl5/5.14.0'
 procselfexe='"/proc/self/exe"'
 prototype='define'
 ptrsize='4'
@@ -907,17 +907,17 @@ sig_num='0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
 sig_num_init='0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 6, 17, 29, 31, 0'
 sig_size='68'
 signal_t='void'
-sitearch='/usr/lib/perl5/site_perl/5.13.11/armv4l-linux'
-sitearchexp='/usr/lib/perl5/site_perl/5.13.11/armv4l-linux'
+sitearch='/usr/lib/perl5/site_perl/5.14.0/armv4l-linux'
+sitearchexp='/usr/lib/perl5/site_perl/5.14.0/armv4l-linux'
 sitebin='/usr/bin'
 sitebinexp='/usr/bin'
 sitehtml1dir=''
 sitehtml1direxp=''
 sitehtml3dir=''
 sitehtml3direxp=''
-sitelib='/usr/lib/perl5/site_perl/5.13.11'
+sitelib='/usr/lib/perl5/site_perl/5.14.0'
 sitelib_stem='/usr/lib/perl5/site_perl'
-sitelibexp='/usr/lib/perl5/site_perl/5.13.11'
+sitelibexp='/usr/lib/perl5/site_perl/5.14.0'
 siteman1dir='/usr/share/man/man1'
 siteman1direxp='/usr/share/man/man1'
 siteman3dir='/usr/share/man/man3'
@@ -954,7 +954,7 @@ stdio_stream_array=''
 strerror_r_proto='0'
 strings='/usr/include/string.h'
 submit=''
-subversion='11'
+subversion='0'
 sysman='/usr/share/man/man1'
 tail=''
 tar=''
@@ -1040,8 +1040,8 @@ vendorprefix=''
 vendorprefixexp=''
 vendorscript=''
 vendorscriptexp=''
-version='5.13.11'
-version_patchlevel_string='version 13 subversion 11'
+version='5.14.0'
+version_patchlevel_string='version 14 subversion 0'
 versiononly='undef'
 vi=''
 voidflags='15'
@@ -1055,10 +1055,10 @@ config_arg0='Configure'
 config_args=''
 config_argc=0
 PERL_REVISION=5
-PERL_VERSION=13
-PERL_SUBVERSION=11
+PERL_VERSION=14
+PERL_SUBVERSION=0
 PERL_API_REVISION=5
-PERL_API_VERSION=13
-PERL_API_SUBVERSION=11
+PERL_API_VERSION=14
+PERL_API_SUBVERSION=0
 PERL_PATCHLEVEL=
 PERL_CONFIG_SH=true

diff --git a/INSTALL b/INSTALL
index ef44183..525f5e4 100644 (file)
--- a/INSTALL
+++ b/INSTALL
@@ -530,9 +530,9 @@ The directories set up by Configure fall into three broad categories.
 
 =item Directories for the perl distribution
 
-By default, Configure will use the following directories for 5.13.11.
+By default, Configure will use the following directories for 5.14.0.
 $version is the full perl version number, including subversion, e.g.
-5.13.11 or 5.9.5, and $archname is a string like sun4-sunos,
+5.14.0 or 5.9.5, and $archname is a string like sun4-sunos,
 determined by Configure.  The full definitions of all Configure
 variables are in the file Porting/Glossary.
 
@@ -841,7 +841,7 @@ must contain a space separated list of directories under the site_perl
 directory, and has to include architecture-dependent directories separately,
 eg.
 
-       sh Configure -Dinc_version_list="5.12.0/x86_64-linux 5.12.0" ...
+       sh Configure -Dinc_version_list="5.14.0/x86_64-linux 5.14.0" ...
 
 When using the newer perl, you can add these paths again in the
 $PERL5LIB environment variable or with perl's -I runtime option.
@@ -2300,7 +2300,7 @@ http://www.chiark.greenend.org.uk/~sgtatham/bugs.html
 
 =head1 Coexistence with earlier versions of perl 5
 
-Perl 5.12 is not binary compatible with earlier versions of Perl.
+Perl 5.14 is not binary compatible with earlier versions of Perl.
 In other words, you will have to recompile your XS modules.
 
 In general, you can usually safely upgrade from one version of Perl (e.g.
@@ -2374,9 +2374,9 @@ won't interfere with another version.  (The defaults guarantee this for
 libraries after 5.6.0, but not for executables. TODO?)  One convenient
 way to do this is by using a separate prefix for each version, such as
 
-       sh Configure -Dprefix=/opt/perl5.13.11
+       sh Configure -Dprefix=/opt/perl5.14.0
 
-and adding /opt/perl5.13.11/bin to the shell PATH variable.  Such users
+and adding /opt/perl5.14.0/bin to the shell PATH variable.  Such users
 may also wish to add a symbolic link /usr/local/bin/perl so that
 scripts can still start with #!/usr/local/bin/perl.
 
@@ -2389,13 +2389,13 @@ seriously consider using a separate directory, since development
 subversions may not have all the compatibility wrinkles ironed out
 yet.
 
-=head2 Upgrading from 5.13.10 or earlier
+=head2 Upgrading from 5.13.11 or earlier
 
-B<Perl 5.13.11 is binary incompatible with Perl 5.13.10 and any earlier
+B<Perl 5.14.0 is binary incompatible with Perl 5.13.11 and any earlier
 Perl release.>  Perl modules having binary parts
 (meaning that a C compiler is used) will have to be recompiled to be
-used with 5.13.11.  If you find you do need to rebuild an extension with
-5.13.11, you may safely do so without disturbing the older
+used with 5.14.0.  If you find you do need to rebuild an extension with
+5.14.0, you may safely do so without disturbing the older
 installations.  (See L<"Coexistence with earlier versions of perl 5">
 above.)
 

diff --git a/META.yml b/META.yml
index 2ee0247..4dc98fe 100644 (file)
--- a/META.yml
+++ b/META.yml
@@ -1,5 +1,5 @@
 name: perl
-version: 5.013011
+version: 5.014000
 abstract: The Perl 5 language interpreter
 author: perl5-porters@perl.org
 license: perl

diff --git a/NetWare/Makefile b/NetWare/Makefile
index 8f9b0ba..34f8a3f 100644 (file)
--- a/NetWare/Makefile
+++ b/NetWare/Makefile
@@ -86,7 +86,7 @@ NLM_VERSION    = 3,20,0
 
 
 # Here comes the CW tools - TO BE FILLED TO BUILD WITH CW -
-MODULE_DESC     = "Perl 5.13.11 for NetWare"
+MODULE_DESC     = "Perl 5.14.0 for NetWare"
 CCTYPE          = CodeWarrior
 C_COMPILER             = mwccnlm -c
 CPP_COMPILER   = mwccnlm
@@ -464,7 +464,7 @@ INST_NW_TOP2 = $(INST_NW_DRV)\perl
 # versioned installation can be obtained by setting INST_TOP above to a
 # path that includes an arbitrary version string.
 #
-INST_VER       = \5.13.11
+INST_VER       = \5.14.0
 
 #
 # Comment this out if you DON'T want your perl installation to have

diff --git a/NetWare/config_H.wc b/NetWare/config_H.wc
index 07aaea9..d363d41 100644 (file)
--- a/NetWare/config_H.wc
+++ b/NetWare/config_H.wc
@@ -1048,7 +1048,7 @@
  *     This symbol contains the ~name expanded version of ARCHLIB, to be used
  *     in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define ARCHLIB "c:\\perl\\5.13.11\\lib\\NetWare-x86-multi-thread"             /**/
+#define ARCHLIB "c:\\perl\\5.14.0\\lib\\NetWare-x86-multi-thread"              /**/
 /*#define ARCHLIB_EXP ""       /**/
 
 /* ARCHNAME:
@@ -1079,8 +1079,8 @@
  *     This symbol is the filename expanded version of the BIN symbol, for
  *     programs that do not want to deal with that at run-time.
  */
-#define BIN "c:\\perl\\5.13.11\\bin\\NetWare-x86-multi-thread" /**/
-#define BIN_EXP "c:\\perl\\5.13.11\\bin\\NetWare-x86-multi-thread"     /**/
+#define BIN "c:\\perl\\5.14.0\\bin\\NetWare-x86-multi-thread"  /**/
+#define BIN_EXP "c:\\perl\\5.14.0\\bin\\NetWare-x86-multi-thread"      /**/
 
 /* BYTEORDER:
  *     This symbol holds the hexadecimal constant defined in byteorder,
@@ -3063,7 +3063,7 @@
  *     This symbol contains the ~name expanded version of SITEARCH, to be used
  *     in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define SITEARCH "c:\\perl\\site\\5.13.11\\lib\\NetWare-x86-multi-thread"              /**/
+#define SITEARCH "c:\\perl\\site\\5.14.0\\lib\\NetWare-x86-multi-thread"               /**/
 /*#define SITEARCH_EXP ""      /**/
 
 /* SITELIB:
@@ -3086,7 +3086,7 @@
  *     removed.  The elements in inc_version_list (inc_version_list.U) can
  *     be tacked onto this variable to generate a list of directories to search.
  */
-#define SITELIB "c:\\perl\\site\\5.13.11\\lib"         /**/
+#define SITELIB "c:\\perl\\site\\5.14.0\\lib"          /**/
 /*#define SITELIB_EXP ""       /**/
 #define SITELIB_STEM ""                /**/
 

diff --git a/Porting/config.sh b/Porting/config.sh
index 93f44ac..2e50940 100644 (file)
--- a/Porting/config.sh
+++ b/Porting/config.sh
@@ -45,12 +45,12 @@ alignbytes='4'
 ansi2knr=''
 aphostname=''
 api_revision='5'
-api_subversion='11'
-api_version='13'
-api_versionstring='5.13.11'
+api_subversion='0'
+api_version='14'
+api_versionstring='5.14.0'
 ar='ar'
-archlib='/opt/perl/lib/5.13.11/i686-linux-64int'
-archlibexp='/opt/perl/lib/5.13.11/i686-linux-64int'
+archlib='/opt/perl/lib/5.14.0/i686-linux-64int'
+archlibexp='/opt/perl/lib/5.14.0/i686-linux-64int'
 archname64='64int'
 archname='i686-linux-64int'
 archobjs=''
@@ -742,7 +742,7 @@ inc_version_list_init='0'
 incpath=''
 inews=''
 initialinstalllocation='/opt/perl/bin'
-installarchlib='/opt/perl/lib/5.13.11/i686-linux-64int'
+installarchlib='/opt/perl/lib/5.14.0/i686-linux-64int'
 installbin='/opt/perl/bin'
 installhtml1dir=''
 installhtml3dir=''
@@ -750,13 +750,13 @@ installman1dir='/opt/perl/man/man1'
 installman3dir='/opt/perl/man/man3'
 installprefix='/opt/perl'
 installprefixexp='/opt/perl'
-installprivlib='/opt/perl/lib/5.13.11'
+installprivlib='/opt/perl/lib/5.14.0'
 installscript='/opt/perl/bin'
-installsitearch='/opt/perl/lib/site_perl/5.13.11/i686-linux-64int'
+installsitearch='/opt/perl/lib/site_perl/5.14.0/i686-linux-64int'
 installsitebin='/opt/perl/bin'
 installsitehtml1dir=''
 installsitehtml3dir=''
-installsitelib='/opt/perl/lib/site_perl/5.13.11'
+installsitelib='/opt/perl/lib/site_perl/5.14.0'
 installsiteman1dir='/opt/perl/man/man1'
 installsiteman3dir='/opt/perl/man/man3'
 installsitescript='/opt/perl/bin'
@@ -879,7 +879,7 @@ perl_patchlevel='34948'
 perl_static_inline='static __inline__'
 perladmin='yourname@yourhost.yourplace.com'
 perllibs='-lnsl -ldl -lm -lcrypt -lutil -lc'
-perlpath='/opt/perl/bin/perl5.13.11'
+perlpath='/opt/perl/bin/perl5.14.0'
 pg='pg'
 phostname=''
 pidtype='pid_t'
@@ -888,8 +888,8 @@ pmake=''
 pr=''
 prefix='/opt/perl'
 prefixexp='/opt/perl'
-privlib='/opt/perl/lib/5.13.11'
-privlibexp='/opt/perl/lib/5.13.11'
+privlib='/opt/perl/lib/5.14.0'
+privlibexp='/opt/perl/lib/5.14.0'
 procselfexe='"/proc/self/exe"'
 prototype='define'
 ptrsize='4'
@@ -955,17 +955,17 @@ sig_num='0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
 sig_num_init='0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 6, 17, 29, 31, 0'
 sig_size='69'
 signal_t='void'
-sitearch='/opt/perl/lib/site_perl/5.13.11/i686-linux-64int'
-sitearchexp='/opt/perl/lib/site_perl/5.13.11/i686-linux-64int'
+sitearch='/opt/perl/lib/site_perl/5.14.0/i686-linux-64int'
+sitearchexp='/opt/perl/lib/site_perl/5.14.0/i686-linux-64int'
 sitebin='/opt/perl/bin'
 sitebinexp='/opt/perl/bin'
 sitehtml1dir=''
 sitehtml1direxp=''
 sitehtml3dir=''
 sitehtml3direxp=''
-sitelib='/opt/perl/lib/site_perl/5.13.11'
+sitelib='/opt/perl/lib/site_perl/5.14.0'
 sitelib_stem='/opt/perl/lib/site_perl'
-sitelibexp='/opt/perl/lib/site_perl/5.13.11'
+sitelibexp='/opt/perl/lib/site_perl/5.14.0'
 siteman1dir='/opt/perl/man/man1'
 siteman1direxp='/opt/perl/man/man1'
 siteman3dir='/opt/perl/man/man3'
@@ -989,7 +989,7 @@ srand48_r_proto='0'
 srandom_r_proto='0'
 src='.'
 ssizetype='ssize_t'
-startperl='#!/opt/perl/bin/perl5.13.11'
+startperl='#!/opt/perl/bin/perl5.14.0'
 startsh='#!/bin/sh'
 static_ext=' '
 stdchar='char'
@@ -1002,7 +1002,7 @@ stdio_stream_array=''
 strerror_r_proto='0'
 strings='/usr/include/string.h'
 submit=''
-subversion='11'
+subversion='0'
 sysman='/usr/share/man/man1'
 tail=''
 tar=''
@@ -1090,8 +1090,8 @@ vendorprefix=''
 vendorprefixexp=''
 vendorscript=''
 vendorscriptexp=''
-version='5.13.11'
-version_patchlevel_string='version 13 subversion 11'
+version='5.14.0'
+version_patchlevel_string='version 14 subversion 0'
 versiononly='define'
 vi=''
 voidflags='15'
@@ -1114,11 +1114,11 @@ config_arg7='-Duse64bitint'
 config_arg8='-Dusedevel'
 config_arg9='-dE'
 PERL_REVISION=5
-PERL_VERSION=13
-PERL_SUBVERSION=11
+PERL_VERSION=14
+PERL_SUBVERSION=0
 PERL_API_REVISION=5
-PERL_API_VERSION=13
-PERL_API_SUBVERSION=11
+PERL_API_VERSION=14
+PERL_API_SUBVERSION=0
 PERL_PATCHLEVEL=34948
 PERL_CONFIG_SH=true
 : Variables propagated from previous config.sh file.

diff --git a/Porting/config_H b/Porting/config_H
index 6c508a3..c422b59 100644 (file)
--- a/Porting/config_H
+++ b/Porting/config_H
@@ -960,8 +960,8 @@
  *     This symbol contains the ~name expanded version of ARCHLIB, to be used
  *     in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define ARCHLIB "/pro/lib/perl5/5.13.11/i686-linux-64int-ld"           /**/
-#define ARCHLIB_EXP "/pro/lib/perl5/5.13.11/i686-linux-64int-ld"               /**/
+#define ARCHLIB "/pro/lib/perl5/5.14.0/i686-linux-64int-ld"            /**/
+#define ARCHLIB_EXP "/pro/lib/perl5/5.14.0/i686-linux-64int-ld"                /**/
 
 /* ARCHNAME:
  *     This symbol holds a string representing the architecture name.
@@ -2068,8 +2068,8 @@
  *     This symbol contains the ~name expanded version of PRIVLIB, to be used
  *     in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define PRIVLIB "/pro/lib/perl5/5.13.11"               /**/
-#define PRIVLIB_EXP "/pro/lib/perl5/5.13.11"           /**/
+#define PRIVLIB "/pro/lib/perl5/5.14.0"                /**/
+#define PRIVLIB_EXP "/pro/lib/perl5/5.14.0"            /**/
 
 /* PTRSIZE:
  *     This symbol contains the size of a pointer, so that the C preprocessor
@@ -2119,8 +2119,8 @@
  *     This symbol contains the ~name expanded version of SITEARCH, to be used
  *     in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define SITEARCH "/pro/lib/perl5/site_perl/5.13.11/i686-linux-64int-ld"                /**/
-#define SITEARCH_EXP "/pro/lib/perl5/site_perl/5.13.11/i686-linux-64int-ld"            /**/
+#define SITEARCH "/pro/lib/perl5/site_perl/5.14.0/i686-linux-64int-ld"         /**/
+#define SITEARCH_EXP "/pro/lib/perl5/site_perl/5.14.0/i686-linux-64int-ld"             /**/
 
 /* SITELIB:
  *     This symbol contains the name of the private library for this package.
@@ -2142,8 +2142,8 @@
  *     removed.  The elements in inc_version_list (inc_version_list.U) can
  *     be tacked onto this variable to generate a list of directories to search.
  */
-#define SITELIB "/pro/lib/perl5/site_perl/5.13.11"             /**/
-#define SITELIB_EXP "/pro/lib/perl5/site_perl/5.13.11"         /**/
+#define SITELIB "/pro/lib/perl5/site_perl/5.14.0"              /**/
+#define SITELIB_EXP "/pro/lib/perl5/site_perl/5.14.0"          /**/
 #define SITELIB_STEM "/pro/lib/perl5/site_perl"                /**/
 
 /* SSize_t:
@@ -4363,7 +4363,7 @@
  *     script to make sure (one hopes) that it runs with perl and not
  *     some shell.
  */
-#define STARTPERL "#!/pro/bin/perl5.13.11"             /**/
+#define STARTPERL "#!/pro/bin/perl5.14.0"              /**/
 
 /* HAS_STDIO_STREAM_ARRAY:
  *     This symbol, if defined, tells that there is an array

diff --git a/README.haiku b/README.haiku
index 6f81b0a..3d2e0e9 100644 (file)
--- a/README.haiku
+++ b/README.haiku
@@ -22,9 +22,9 @@ The build procedure is completely standard:
 Make perl executable and create a symlink for libperl:
 
   chmod a+x /boot/common/bin/perl
-  cd /boot/common/lib; ln -s perl5/5.13.11/BePC-haiku/CORE/libperl.so .
+  cd /boot/common/lib; ln -s perl5/5.14.0/BePC-haiku/CORE/libperl.so .
 
-Replace C<5.13.11> with your respective version of Perl.
+Replace C<5.14.0> with your respective version of Perl.
 
 =head1 KNOWN PROBLEMS
 

diff --git a/README.os2 b/README.os2
index 12797d6..27dd601 100644 (file)
--- a/README.os2
+++ b/README.os2
@@ -618,7 +618,7 @@ C<set PERLLIB_PREFIX> in F<Config.sys>, see L<"PERLLIB_PREFIX">.
 
 =item Additional Perl modules
 
-  unzip perl_ste.zip -d f:/perllib/lib/site_perl/5.13.11/
+  unzip perl_ste.zip -d f:/perllib/lib/site_perl/5.14.0/
 
 Same remark as above applies.  Additionally, if this directory is not
 one of directories on @INC (and @INC is influenced by C<PERLLIB_PREFIX>), you

diff --git a/README.vms b/README.vms
index d5b85f7..585647b 100644 (file)
--- a/README.vms
+++ b/README.vms
@@ -154,12 +154,12 @@ recent versions of vmstar (e.g. V3.4 or later).  Contrary to advice
 provided with previous versions of Perl, do I<not> use the ODS-2
 compatibility qualifier.  Instead, use a command like the following:
 
-    vmstar -xvf perl-5^.13^.11.tar
+    vmstar -xvf perl-5^.14^.0.tar
 
 Then rename the top-level source directory like so:
 
-    set security/protection=(o:rwed) perl-5^.13^.11.dir
-    rename perl-5^.13^.11.dir perl-5_13_11.dir
+    set security/protection=(o:rwed) perl-5^.14^.0.dir
+    rename perl-5^.14^.0.dir perl-5_14_0.dir
 
 The reason for this last step is that while filenames with multiple dots
 are generally supported by Perl on VMS, I<directory> names with multiple

diff --git a/README.win32 b/README.win32
index cf387a7..67869ca 100644 (file)
--- a/README.win32
+++ b/README.win32
@@ -391,7 +391,7 @@ Be sure to read the instructions near the top of the makefiles carefully.
 Type "dmake" (or "nmake" if you are using that make).
 
 This should build everything.  Specifically, it will create perl.exe,
-perl513.dll at the perl toplevel, and various other extension dll's
+perl514.dll at the perl toplevel, and various other extension dll's
 under the lib\auto directory.  If the build fails for any reason, make
 sure you have done the previous steps correctly.
 

diff --git a/epoc/config.sh b/epoc/config.sh
index 707e5b0..4138c7d 100644 (file)
--- a/epoc/config.sh
+++ b/epoc/config.sh
@@ -33,8 +33,8 @@ apirevision=''
 apisubversion=''
 apiversion=''
 ar='arm-epoc-pe-ar'
-archlib='/usr/lib/perl/5.13.11/epoc'
-archlibexp='/usr/lib/perl/5.13.11/epoc'
+archlib='/usr/lib/perl/5.14.0/epoc'
+archlibexp='/usr/lib/perl/5.14.0/epoc'
 archname64=''
 archname='epoc'
 archobjs='epoc.o epocish.o epoc_stubs.o'
@@ -766,8 +766,8 @@ pmake=''
 pr=''
 prefix=''
 prefixexp=''
-privlib='/usr/lib/perl/5.13.11'
-privlibexp='/usr/lib/perl/5.13.11'
+privlib='/usr/lib/perl/5.14.0'
+privlibexp='/usr/lib/perl/5.14.0'
 procselfexe=''
 prototype='define'
 ptrsize='4'
@@ -826,11 +826,11 @@ sig_num='0'
 sig_num_init='0, 0'
 sig_size='1'
 signal_t='void'
-sitearch='/usr/lib/perl/site_perl/5.13.11/epoc'
-sitearchexp='/usr/lib/perl/site_perl/5.13.11/epoc'
-sitelib='/usr/lib/perl/site_perl/5.13.11/'
+sitearch='/usr/lib/perl/site_perl/5.14.0/epoc'
+sitearchexp='/usr/lib/perl/site_perl/5.14.0/epoc'
+sitelib='/usr/lib/perl/site_perl/5.14.0/'
 sitelib_stem='/usr/lib/perl/site_perl'
-sitelibexp='/usr/lib/perl/site_perl/5.13.11/'
+sitelibexp='/usr/lib/perl/site_perl/5.14.0/'
 siteprefix=''
 siteprefixexp=''
 sizesize='4'
@@ -914,7 +914,7 @@ vendorlib_stem=''
 vendorlibexp=''
 vendorprefix=''
 vendorprefixexp=''
-version='5.13.11'
+version='5.14.0'
 versiononly='undef'
 vi=''
 voidflags='15'
@@ -937,11 +937,11 @@ config_arg9=''
 config_arg10=''
 config_arg11=''
 PERL_REVISION=5
-PERL_VERSION=13
-PERL_SUBVERSION=11
+PERL_VERSION=14
+PERL_SUBVERSION=0
 PERL_API_REVISION=5
-PERL_API_VERSION=13
-PERL_API_SUBVERSION=11
+PERL_API_VERSION=14
+PERL_API_SUBVERSION=0
 PERL_CONFIG_SH=true
 # Variables propagated from previous config.sh file.
 pp_sys_cflags=''
@@ -1047,7 +1047,7 @@ vendorlib_stem=''
 vendorlibexp=''
 vendorprefix=''
 vendorprefixexp=''
-version='5.13.11'
+version='5.14.0'
 vi=''
 voidflags='15'
 xlibpth=''
@@ -1069,11 +1069,11 @@ config_arg9=''
 config_arg10=''
 config_arg11=''
 PERL_REVISION=5
-PERL_VERSION=13
-PERL_SUBVERSION=11
+PERL_VERSION=14
+PERL_SUBVERSION=0
 PERL_API_REVISION=5
-PERL_API_VERSION=13
-PERL_API_SUBVERSION=11
+PERL_API_VERSION=14
+PERL_API_SUBVERSION=0
 CONFIGDOTSH=true
 # Variables propagated from previous config.sh file.
 pp_sys_cflags=''
@@ -1171,16 +1171,16 @@ d_SCNfldbl='undef'
 d_perl_otherlibdirs='undef'
 nvsize='16'
 issymlink=''
-installarchlib='/home/of/PERL/perl/lib/5.13.11/epoc'
+installarchlib='/home/of/PERL/perl/lib/5.14.0/epoc'
 installbin='/home/of/PERL/System/Programs/'
 installman1dir='/home/of/PERL/man1'
 installman3dir='/home/of/PERL/man3'
 installprefix=''
 installprefixexp=''
-installprivlib='/home/of/PERL/perl/lib/5.13.11/'
+installprivlib='/home/of/PERL/perl/lib/5.14.0/'
 installscript='/home/of/PERL/bin/'
-installsitearch='/home/of/PERL/site/lib/site_perl/5.13.11/epoc'
-installsitelib='/home/of/PERL/perl/lib/site_perl/5.13.11'
+installsitearch='/home/of/PERL/site/lib/site_perl/5.14.0/epoc'
+installsitelib='/home/of/PERL/perl/lib/site_perl/5.14.0'
 installstyle=''
 installusrbinperl='undef'
 installvendorlib=''

diff --git a/epoc/createpkg.pl b/epoc/createpkg.pl
index b4dcf0b..e2289c9 100644 (file)
--- a/epoc/createpkg.pl
+++ b/epoc/createpkg.pl
@@ -3,7 +3,7 @@
 use File::Find;
 use Cwd;
 
-$VERSION="5.13.11";
+$VERSION="5.14.0";
 $EPOC_VERSION=1;
 
 

diff --git a/hints/catamount.sh b/hints/catamount.sh
index 5cdccaf..ba9e2b2 100644 (file)
--- a/hints/catamount.sh
+++ b/hints/catamount.sh
@@ -31,11 +31,11 @@
 # mkdir -p /opt/perl-catamount
 # mkdir -p /opt/perl-catamount/include
 # mkdir -p /opt/perl-catamount/lib
-# mkdir -p /opt/perl-catamount/lib/perl5/5.13.11
+# mkdir -p /opt/perl-catamount/lib/perl5/5.14.0
 # mkdir -p /opt/perl-catamount/bin
 # cp *.h /opt/perl-catamount/include
 # cp libperl.a /opt/perl-catamount/lib
-# cp -pr lib/* /opt/perl-catamount/lib/perl5/5.13.11
+# cp -pr lib/* /opt/perl-catamount/lib/perl5/5.14.0
 # cp miniperl perl run.sh cc.sh /opt/perl-catamount/lib
 #
 # With the headers and the libperl.a you can embed Perl to your Catamount

diff --git a/hints/dgux.sh b/hints/dgux.sh
index 6146e90..9d5d0d4 100644 (file)
--- a/hints/dgux.sh
+++ b/hints/dgux.sh
@@ -52,14 +52,14 @@ libpth="/usr/lib"
 #####################################
 
 prefix=/usr/local
-perlpath="$prefix/bin/perl513"
-startperl="#! $prefix/bin/perl513"
-privlib="$prefix/lib/perl513"
+perlpath="$prefix/bin/perl514"
+startperl="#! $prefix/bin/perl514"
+privlib="$prefix/lib/perl514"
 man1dir="$prefix/man/man1"
 man3dir="$prefix/man/man3"
 
-sitearch="$prefix/lib/perl513/$archname"
-sitelib="$prefix/lib/perl513"
+sitearch="$prefix/lib/perl514/$archname"
+sitelib="$prefix/lib/perl514"
 
 #Do not overwrite by default /usr/bin/perl of DG/UX
 installusrbinperl="$undef"
@@ -138,7 +138,7 @@ unset sde_path default_sde sde
 # <takis@XFree86.Org>
 #####################################
 
-libperl="libperl513.so"
+libperl="libperl514.so"
 
 # Many functions (eg, gethostent(), killpg(), getpriority(), setruid()
 # dbm_*(), and plenty more) are defined in -ldgc.  Usually you don't
@@ -205,8 +205,8 @@ $define|true|[yY]*)
        # DG/UX library!
        libswanted="dbm posix resolv socket nsl dl m rte"
        archname="ix86-dgux-thread"
-       sitearch="$prefix/lib/perl513/$archname"
-       sitelib="$prefix/lib/perl513"
+       sitearch="$prefix/lib/perl514/$archname"
+       sitelib="$prefix/lib/perl514"
   case "$cc" in
        *gcc*)
           #### Use GCC -2.95.2/3 rev (DG/UX) and -pthread

diff --git a/makedef.pl b/makedef.pl
index 549e8f0..73a80ad 100644 (file)
--- a/makedef.pl
+++ b/makedef.pl
@@ -179,7 +179,7 @@ my $sym_ord = 0;
 print STDERR "Defines: (" . join(' ', sort keys %define) . ")\n";
 
 if ($PLATFORM =~ /^win(?:32|ce)$/) {
-    (my $dll = ($define{PERL_DLL} || "perl513")) =~ s/\.dll$//i;
+    (my $dll = ($define{PERL_DLL} || "perl514")) =~ s/\.dll$//i;
     print "LIBRARY $dll\n";
     # The DESCRIPTION module definition file statement is not supported
     # by VC7 onwards.
@@ -235,7 +235,7 @@ elsif ($PLATFORM eq 'aix') {
 }
 elsif ($PLATFORM eq 'netware') {
        if ($FILETYPE eq 'def') {
-       print "LIBRARY perl513\n";
+       print "LIBRARY perl514\n";
        print "DESCRIPTION 'Perl interpreter for NetWare'\n";
        print "EXPORTS\n";
        }

diff --git a/patchlevel.h b/patchlevel.h
index 94f82c4..5d66a62 100644 (file)
--- a/patchlevel.h
+++ b/patchlevel.h
@@ -14,8 +14,8 @@
  * exactly on the third column */
 
 #define PERL_REVISION  5               /* age */
-#define PERL_VERSION   13              /* epoch */
-#define PERL_SUBVERSION        11              /* generation */
+#define PERL_VERSION   14              /* epoch */
+#define PERL_SUBVERSION        0               /* generation */
 
 /* The following numbers describe the earliest compatible version of
    Perl ("compatibility" here being defined as sufficient binary/API
@@ -35,8 +35,8 @@
    changing them should not be necessary.
 */
 #define PERL_API_REVISION      5
-#define PERL_API_VERSION       13
-#define PERL_API_SUBVERSION    11
+#define PERL_API_VERSION       14
+#define PERL_API_SUBVERSION    0
 /*
    XXX Note:  The selection of non-default Configure options, such
    as -Duselonglong may invalidate these settings.  Currently, Configure
@@ -133,6 +133,7 @@ hunk.
 #  endif
 static const char * const local_patches[] = {
        NULL
+    ,"RC0"
 #ifdef PERL_GIT_UNCOMMITTED_CHANGES
        ,"uncommitted-changes"
 #endif

diff --git a/plan9/config.plan9 b/plan9/config.plan9
index 27b76ae..b4351b7 100644 (file)
--- a/plan9/config.plan9
+++ b/plan9/config.plan9
@@ -3385,8 +3385,8 @@
  *     This symbol contains the ~name expanded version of PRIVLIB, to be used
  *     in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define PRIVLIB "/sys/lib/perl/5.13.11"                /**/
-#define PRIVLIB_EXP "/sys/lib/perl/5.13.11"            /**/
+#define PRIVLIB "/sys/lib/perl/5.14.0"         /**/
+#define PRIVLIB_EXP "/sys/lib/perl/5.14.0"             /**/
 
 /* PTRSIZE:
  *     This symbol contains the size of a pointer, so that the C preprocessor
@@ -3513,9 +3513,9 @@
  *     removed.  The elements in inc_version_list (inc_version_list.U) can
  *     be tacked onto this variable to generate a list of directories to search.
  */
-#define SITELIB "/sys/lib/perl/5.13.11/site_perl"              /**/
-#define SITELIB_EXP "/sys/lib/perl/5.13.11/site_perl"          /**/
-#define SITELIB_STEM "/sys/lib/perl/5.13.11/site_perl"         /**/
+#define SITELIB "/sys/lib/perl/5.14.0/site_perl"               /**/
+#define SITELIB_EXP "/sys/lib/perl/5.14.0/site_perl"           /**/
+#define SITELIB_STEM "/sys/lib/perl/5.14.0/site_perl"          /**/
 
 /* Size_t_size:
  *     This symbol holds the size of a Size_t in bytes.

diff --git a/plan9/config_sh.sample b/plan9/config_sh.sample
index 83cce5d..cbbbd8f 100644 (file)
--- a/plan9/config_sh.sample
+++ b/plan9/config_sh.sample
@@ -32,12 +32,12 @@ alignbytes='4'
 ansi2knr=''
 aphostname='/bin/uname -n'
 api_revision='5'
-api_subversion='11'
-api_version='13'
-api_versionstring='5.13.11'
+api_subversion='0'
+api_version='14'
+api_versionstring='5.14.0'
 ar='ar'
-archlib='/sys/lib/perl5/5.13.11/386'
-archlibexp='/sys/lib/perl5/5.13.11/386'
+archlib='/sys/lib/perl5/5.14.0/386'
+archlibexp='/sys/lib/perl5/5.14.0/386'
 archname64=''
 archname='386'
 archobjs=''
@@ -718,17 +718,17 @@ inc_version_list=' '
 inc_version_list_init='0'
 incpath=''
 inews=''
-installarchlib='/sys/lib/perl/5.13.11/386'
+installarchlib='/sys/lib/perl/5.14.0/386'
 installbin='/usr/bin'
 installman1dir='/sys/man/1pub'
 installman3dir='/sys/man/2pub'
 installprefix='/usr'
 installprefixexp='/usr'
-installprivlib='/sys/lib/perl/5.13.11'
+installprivlib='/sys/lib/perl/5.14.0'
 installscript='/usr/bin'
-installsitearch='/sys/lib/perl/5.13.11/site_perl/386'
+installsitearch='/sys/lib/perl/5.14.0/site_perl/386'
 installsitebin='/usr/bin'
-installsitelib='/sys/lib/perl/5.13.11/site_perl'
+installsitelib='/sys/lib/perl/5.14.0/site_perl'
 installstyle='lib/perl5'
 installusrbinperl='undef'
 installvendorarch=''
@@ -848,8 +848,8 @@ pmake=''
 pr=''
 prefix='/usr'
 prefixexp='/usr'
-privlib='/sys/lib/perl/5.13.11'
-privlibexp='/sys/lib/perl/5.13.11'
+privlib='/sys/lib/perl/5.14.0'
+privlibexp='/sys/lib/perl/5.14.0'
 procselfexe=''
 prototype='define'
 ptrsize='4'
@@ -914,13 +914,13 @@ sig_num='0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
 sig_num_init='0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 0'
 sig_size='50'
 signal_t='void'
-sitearch='/sys/lib/perl/5.13.11/site_perl/386'
+sitearch='/sys/lib/perl/5.14.0/site_perl/386'
 sitearchexp='/sys/lib/perl/site_perl/386'
 sitebin='/usr/bin'
 sitebinexp='/usr/bin'
-sitelib='/sys/lib/perl/5.13.11/site_perl'
-sitelib_stem='/sys/lib/perl/5.13.11/site_perl'
-sitelibexp='/sys/lib/perl/5.13.11/site_perl'
+sitelib='/sys/lib/perl/5.14.0/site_perl'
+sitelib_stem='/sys/lib/perl/5.14.0/site_perl'
+sitelibexp='/sys/lib/perl/5.14.0/site_perl'
 siteprefix='/usr'
 siteprefixexp='/usr'
 sizesize='4'
@@ -951,7 +951,7 @@ stdio_stream_array=''
 strerror_r_proto='0'
 strings='/sys/include/ape/string.h'
 submit=''
-subversion='11'
+subversion='0'
 sysman='/sys/man/1pub'
 tail=''
 tar=''
@@ -1029,8 +1029,8 @@ vendorlib_stem=''
 vendorlibexp=''
 vendorprefix=''
 vendorprefixexp=''
-version='5.13.11'
-version_patchlevel_string='version 13 subversion 11'
+version='5.14.0'
+version_patchlevel_string='version 14 subversion 0'
 versiononly='undef'
 vi=''
 voidflags='15'
@@ -1044,10 +1044,10 @@ config_arg0='./Configure'
 config_args=''
 config_argc=0
 PERL_REVISION=5
-PERL_VERSION=13
-PERL_SUBVERSION=11
+PERL_VERSION=14
+PERL_SUBVERSION=0
 PERL_API_REVISION=5
-PERL_API_VERSION=13
-PERL_API_SUBVERSION=11
+PERL_API_VERSION=14
+PERL_API_SUBVERSION=0
 PERL_PATCHLEVEL=
 PERL_CONFIG_SH=true

diff --git a/uconfig.h b/uconfig.h
index 8c0c98f..42a694b 100644 (file)
--- a/uconfig.h
+++ b/uconfig.h
@@ -956,8 +956,8 @@
  *     This symbol contains the ~name expanded version of ARCHLIB, to be used
  *     in programs that are not prepared to deal with ~ expansion at run-time.
  */
-/*#define ARCHLIB "/usr/local/lib/perl5/5.13/unknown"          / **/
-/*#define ARCHLIB_EXP "/usr/local/lib/perl5/5.13/unknown"              / **/
+/*#define ARCHLIB "/usr/local/lib/perl5/5.14/unknown"          / **/
+/*#define ARCHLIB_EXP "/usr/local/lib/perl5/5.14/unknown"              / **/
 
 /* ARCHNAME:
  *     This symbol holds a string representing the architecture name.
@@ -2064,8 +2064,8 @@
  *     This symbol contains the ~name expanded version of PRIVLIB, to be used
  *     in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define PRIVLIB "/usr/local/lib/perl5/5.13"            /**/
-#define PRIVLIB_EXP "/usr/local/lib/perl5/5.13"                /**/
+#define PRIVLIB "/usr/local/lib/perl5/5.14"            /**/
+#define PRIVLIB_EXP "/usr/local/lib/perl5/5.14"                /**/
 
 /* PTRSIZE:
  *     This symbol contains the size of a pointer, so that the C preprocessor
@@ -2115,8 +2115,8 @@
  *     This symbol contains the ~name expanded version of SITEARCH, to be used
  *     in programs that are not prepared to deal with ~ expansion at run-time.
  */
-/*#define SITEARCH "/usr/local/lib/perl5/5.13/unknown"         / **/
-/*#define SITEARCH_EXP "/usr/local/lib/perl5/5.13/unknown"             / **/
+/*#define SITEARCH "/usr/local/lib/perl5/5.14/unknown"         / **/
+/*#define SITEARCH_EXP "/usr/local/lib/perl5/5.14/unknown"             / **/
 
 /* SITELIB:
  *     This symbol contains the name of the private library for this package.
@@ -2138,8 +2138,8 @@
  *     removed.  The elements in inc_version_list (inc_version_list.U) can
  *     be tacked onto this variable to generate a list of directories to search.
  */
-#define SITELIB "/usr/local/lib/perl5/5.13"            /**/
-#define SITELIB_EXP "/usr/local/lib/perl5/5.13"                /**/
+#define SITELIB "/usr/local/lib/perl5/5.14"            /**/
+#define SITELIB_EXP "/usr/local/lib/perl5/5.14"                /**/
 #define SITELIB_STEM "/usr/local/lib/perl5"            /**/
 
 /* SSize_t:

diff --git a/uconfig.sh b/uconfig.sh
index c4e189b..1252bd3 100644 (file)
--- a/uconfig.sh
+++ b/uconfig.sh
@@ -5,8 +5,8 @@ afs='false'
 afsroot='/afs'
 alignbytes='4'
 aphostname='/bin/hostname'
-archlib='/usr/local/lib/perl5/5.13/unknown'
-archlibexp='/usr/local/lib/perl5/5.13/unknown'
+archlib='/usr/local/lib/perl5/5.14/unknown'
+archlibexp='/usr/local/lib/perl5/5.14/unknown'
 archname='unknown'
 asctime_r_proto='0'
 bin='/usr/local/bin'
@@ -674,8 +674,8 @@ package='perl5'
 perl_static_inline='static'
 phostname='hostname'
 pidtype=int
-privlib='/usr/local/lib/perl5/5.13'
-privlibexp='/usr/local/lib/perl5/5.13'
+privlib='/usr/local/lib/perl5/5.14'
+privlibexp='/usr/local/lib/perl5/5.14'
 procselfexe=''
 prototype='undef'
 ptrsize='4'
@@ -725,11 +725,11 @@ sig_name_init='0'
 sig_num_init='0'
 sig_size='1'
 signal_t=int
-sitearch='/usr/local/lib/perl5/5.13/unknown'
-sitearchexp='/usr/local/lib/perl5/5.13/unknown'
-sitelib='/usr/local/lib/perl5/5.13'
+sitearch='/usr/local/lib/perl5/5.14/unknown'
+sitearchexp='/usr/local/lib/perl5/5.14/unknown'
+sitelib='/usr/local/lib/perl5/5.14'
 sitelib_stem='/usr/local/lib/perl5'
-sitelibexp='/usr/local/lib/perl5/5.13'
+sitelibexp='/usr/local/lib/perl5/5.14'
 sizesize=4
 sizetype='size_t'
 socksizetype='int'

diff --git a/uconfig64.sh b/uconfig64.sh
index 437595e..06a5225 100644 (file)
--- a/uconfig64.sh
+++ b/uconfig64.sh
@@ -6,8 +6,8 @@ afsroot='/afs'
 alignbytes='8'
 ansi2knr=''
 aphostname='/bin/hostname'
-archlib='/usr/local/lib/perl5/5.13/unknown'
-archlibexp='/usr/local/lib/perl5/5.13/unknown'
+archlib='/usr/local/lib/perl5/5.14/unknown'
+archlibexp='/usr/local/lib/perl5/5.14/unknown'
 archname='unknown64'
 asctime_r_proto='0'
 bin='/usr/local/bin'
@@ -675,8 +675,8 @@ package='perl5'
 perl_static_inline='static'
 phostname='hostname'
 pidtype=int
-privlib='/usr/local/lib/perl5/5.13'
-privlibexp='/usr/local/lib/perl5/5.13'
+privlib='/usr/local/lib/perl5/5.14'
+privlibexp='/usr/local/lib/perl5/5.14'
 procselfexe=''
 prototype='undef'
 ptrsize='8'
@@ -726,11 +726,11 @@ sig_name_init='0'
 sig_num_init='0'
 sig_size='1'
 signal_t=int
-sitearch='/usr/local/lib/perl5/5.13/unknown'
-sitearchexp='/usr/local/lib/perl5/5.13/unknown'
-sitelib='/usr/local/lib/perl5/5.13'
+sitearch='/usr/local/lib/perl5/5.14/unknown'
+sitearchexp='/usr/local/lib/perl5/5.14/unknown'
+sitelib='/usr/local/lib/perl5/5.14'
 sitelib_stem='/usr/local/lib/perl5'
-sitelibexp='/usr/local/lib/perl5/5.13'
+sitelibexp='/usr/local/lib/perl5/5.14'
 sizesize=4
 sizetype='size_t'
 socksizetype='int'

diff --git a/win32/Makefile b/win32/Makefile
index 7b815c7..2a35c31 100644 (file)
--- a/win32/Makefile
+++ b/win32/Makefile
@@ -5,7 +5,7 @@
 #      Windows SDK 64-bit compiler and tools
 #
 # This is set up to build a perl.exe that runs off a shared library
-# (perl513.dll).  Also makes individual DLLs for the XS extensions.
+# (perl514.dll).  Also makes individual DLLs for the XS extensions.
 #
 
 ##
@@ -37,7 +37,7 @@ INST_TOP      = $(INST_DRV)\perl
 # versioned installation can be obtained by setting INST_TOP above to a
 # path that includes an arbitrary version string.
 #
-#INST_VER      = \5.13.11
+#INST_VER      = \5.14.0
 
 #
 # Comment this out if you DON'T want your perl installation to have
@@ -152,7 +152,7 @@ CCTYPE              = MSVC60
 # set this to additionally provide a statically linked perl-static.exe.
 # Note that dynamic loading will not work with this perl, so you must
 # include required modules statically using the STATIC_EXT or ALL_STATIC
-# variables below. A static library perl513s.lib will also be created.
+# variables below. A static library perl514s.lib will also be created.
 # Ordinary perl.exe is not affected by this option.
 #
 #BUILD_STATIC  = define
@@ -516,9 +516,9 @@ $(o).dll:
 
 # makedef.pl must be updated if this changes, and this should normally
 # only change when there is an incompatible revision of the public API.
-PERLIMPLIB     = ..\perl513.lib
-PERLSTATICLIB  = ..\perl513s.lib
-PERLDLL                = ..\perl513.dll
+PERLIMPLIB     = ..\perl514.lib
+PERLSTATICLIB  = ..\perl514s.lib
+PERLDLL                = ..\perl514.dll
 
 MINIPERL       = ..\miniperl.exe
 MINIDIR                = .\mini

diff --git a/win32/Makefile.ce b/win32/Makefile.ce
index ffc781c..22030ab 100644 (file)
--- a/win32/Makefile.ce
+++ b/win32/Makefile.ce
@@ -6,7 +6,7 @@
 
 SRCDIR     = ..
 PV         = 59
-INST_VER   = 5.13.11
+INST_VER   = 5.14.0
 
 # INSTALL_ROOT specifies a path where this perl will be installed on CE device
 INSTALL_ROOT=/netzwerk/sprache/perl

diff --git a/win32/makefile.mk b/win32/makefile.mk
index f707021..a6e1593 100644 (file)
--- a/win32/makefile.mk
+++ b/win32/makefile.mk
@@ -7,7 +7,7 @@
 #      Windows SDK 64-bit compiler and tools
 #
 # This is set up to build a perl.exe that runs off a shared library
-# (perl513.dll).  Also makes individual DLLs for the XS extensions.
+# (perl514.dll).  Also makes individual DLLs for the XS extensions.
 #
 
 ##
@@ -39,7 +39,7 @@ INST_TOP      *= $(INST_DRV)\perl
 # versioned installation can be obtained by setting INST_TOP above to a
 # path that includes an arbitrary version string.
 #
-#INST_VER      *= \5.13.11
+#INST_VER      *= \5.14.0
 
 #
 # Comment this out if you DON'T want your perl installation to have
@@ -170,7 +170,7 @@ CCTYPE              *= GCC
 # set this to additionally provide a statically linked perl-static.exe.
 # Note that dynamic loading will not work with this perl, so you must
 # include required modules statically using the STATIC_EXT or ALL_STATIC
-# variables below. A static library perl513s.lib will also be created.
+# variables below. A static library perl514s.lib will also be created.
 # Ordinary perl.exe is not affected by this option.
 #
 #BUILD_STATIC  *= define
@@ -803,8 +803,8 @@ CFGH_TMPL   = config_H.gc64nox
 CFGSH_TMPL     = config.gc
 CFGH_TMPL      = config_H.gc
 .ENDIF
-PERLIMPLIB     = ..\libperl513$(a)
-PERLSTATICLIB  = ..\libperl513s$(a)
+PERLIMPLIB     = ..\libperl514$(a)
+PERLSTATICLIB  = ..\libperl514s$(a)
 
 .ELSE
 
@@ -820,9 +820,9 @@ CFGH_TMPL   = config_H.vc
 
 # makedef.pl must be updated if this changes, and this should normally
 # only change when there is an incompatible revision of the public API.
-PERLIMPLIB     *= ..\perl513$(a)
-PERLSTATICLIB  *= ..\perl513s$(a)
-PERLDLL                = ..\perl513.dll
+PERLIMPLIB     *= ..\perl514$(a)
+PERLSTATICLIB  *= ..\perl514s$(a)
+PERLDLL                = ..\perl514.dll
 
 XCOPY          = xcopy /f /r /i /d /y
 RCOPY          = xcopy /f /r /i /e /d /y