Signal issues.

(1) Filter out negative signals.
(2) Correct sig_num* and sig_name* descriptions.

p4raw-id: //depot/perl@18971

diff --git a/Configure b/Configure
index 1517054..9f2528a 100755 (executable)
--- a/Configure
+++ b/Configure
@@ -20,7 +20,7 @@
 
 # $Id: Head.U,v 3.0.1.9 1997/02/28 15:02:09 ram Exp $
 #
-# Generated on Thu Mar 13 12:23:47 EET 2003 [metaconfig 3.0 PL70]
+# Generated on Fri Mar 14 11:20:02 EET 2003 [metaconfig 3.0 PL70]
 # (with additional metaconfig patches by perlbug@perl.org)
 
 cat >c1$$ <<EOF
@@ -18777,7 +18777,7 @@ $1 ~ /^NSIG$/ { nsig = $2 }
        dup_num[ndups] = $2
        ndups++ 
     }
-    else {
+    else if ($2 >= 0) {
        sig_name[$2] = $1
        sig_num[$2] = $2
     }

diff --git a/Porting/Glossary b/Porting/Glossary
index 75a044f..14fa609 100644 (file)
--- a/Porting/Glossary
+++ b/Porting/Glossary
@@ -2147,6 +2147,9 @@ d_vendorbin (vendorbin.U):
 d_vendorlib (vendorlib.U):
        This variable conditionally defines PERL_VENDORLIB.
 
+d_vendorscript (vendorscript.U):
+       This variable conditionally defines PERL_VENDORSCRIPT.
+
 d_vfork (d_vfork.U):
        This variable conditionally defines the HAS_VFORK symbol, which
        indicates the vfork() routine is available.
@@ -2625,6 +2628,27 @@ hostcat (nis.U):
        On some systems, such as os390, there may be no equivalent
        command, in which case this variable is unset.
 
+html1dir (html1dir.U):
+       This variable contains the name of the directory in which html
+       source pages are to be put.  This directory is for pages
+       that describe whole programs, not libraries or modules.  It
+       is intended to correspond roughly to section 1 of the Unix
+       manuals.
+
+html1direxp (html1dir.U):
+       This variable is the same as the html1dir variable, but is filename
+       expanded at configuration time, for convenient use in makefiles.
+
+html3dir (html3dir.U):
+       This variable contains the name of the directory in which html
+       source pages are to be put.  This directory is for pages
+       that describe libraries or modules.  It is intended to
+       correspond roughly to section 3 of the Unix manuals.
+
+html3direxp (html3dir.U):
+       This variable is the same as the html3dir variable, but is filename
+       expanded at configuration time, for convenient use in makefiles.
+
 i16size (perlxv.U):
        This variable is the size of an I16 in bytes.
 
@@ -3041,6 +3065,16 @@ installbin (bin.U):
        the user is explicitely prompted for it. This variable should always
        be used in your makefiles for maximum portability.
 
+installhtml1dir (html1dir.U):
+       This variable is really the same as html1direxp, unless you are 
+       using a different installprefix.  For extra portability, you 
+       should only use this variable within your makefiles.
+
+installhtml3dir (html3dir.U):
+       This variable is really the same as html3direxp, unless you are 
+       using a different installprefix.  For extra portability, you 
+       should only use this variable within your makefiles.
+
 installman1dir (man1dir.U):
        This variable is really the same as man1direxp, unless you are using
        AFS in which case it points to the read/write location whereas
@@ -3085,11 +3119,40 @@ installsitebin (sitebin.U):
        a system running AFS, in which case they may differ slightly. You
        should always use this variable within your makefiles for portability.
 
+installsitehtml1 (sitehtml1.U):
+       This variable is really the same as sitehtml1exp, unless you are using
+       AFS in which case it points to the read/write location whereas
+       html1direxp only points to the read-only access location. For extra
+       portability, you should only use this variable within your makefiles.
+
+installsitehtml3 (sitehtml3.U):
+       This variable is really the same as sitehtml3exp, unless you are using
+       AFS in which case it points to the read/write location whereas
+       html3direxp only points to the read-only access location. For extra
+       portability, you should only use this variable within your makefiles.
+
 installsitelib (sitelib.U):
        This variable is really the same as sitelibexp but may differ on
        those systems using AFS. For extra portability, only this variable
        should be used in makefiles.
 
+installsiteman1 (siteman1.U):
+       This variable is really the same as siteman1exp, unless you are using
+       AFS in which case it points to the read/write location whereas
+       man1direxp only points to the read-only access location. For extra
+       portability, you should only use this variable within your makefiles.
+
+installsiteman3 (siteman3.U):
+       This variable is really the same as siteman3exp, unless you are using
+       AFS in which case it points to the read/write location whereas
+       man3direxp only points to the read-only access location. For extra
+       portability, you should only use this variable within your makefiles.
+
+installsitescript (sitescript.U):
+       This variable is usually the same as sitescriptexp, unless you are on
+       a system running AFS, in which case they may differ slightly. You
+       should always use this variable within your makefiles for portability.
+
 installstyle (installstyle.U):
        This variable describes the "style" of the perl installation.
        This is intended to be useful for tools that need to
@@ -3141,11 +3204,36 @@ installvendorbin (vendorbin.U):
        those systems using AFS. For extra portability, only this variable
        should be used in makefiles.
 
+installvendorhtml1 (vendorhtml1.U):
+       This variable is really the same as vendorhtml1exp but may differ on
+       those systems using AFS. For extra portability, only this variable
+       should be used in makefiles.
+
+installvendorhtml3 (vendorhtml3.U):
+       This variable is really the same as vendorhtml3exp but may differ on
+       those systems using AFS. For extra portability, only this variable
+       should be used in makefiles.
+
 installvendorlib (vendorlib.U):
        This variable is really the same as vendorlibexp but may differ on
        those systems using AFS. For extra portability, only this variable
        should be used in makefiles.
 
+installvendorman1 (vendorman1.U):
+       This variable is really the same as vendorman1exp but may differ on
+       those systems using AFS. For extra portability, only this variable
+       should be used in makefiles.
+
+installvendorman3 (vendorman3.U):
+       This variable is really the same as vendorman3exp but may differ on
+       those systems using AFS. For extra portability, only this variable
+       should be used in makefiles.
+
+installvendorscript (vendorscript.U):
+       This variable is really the same as vendorscriptexp but may differ on
+       those systems using AFS. For extra portability, only this variable
+       should be used in makefiles.
+
 intsize (intsize.U):
        This variable contains the value of the INTSIZE symbol, which
        indicates to the C program how many bytes there are in an int.
@@ -3629,6 +3717,11 @@ perl5 (perl5.U):
        installed perl5.005 or later suitable for running the script
        to determine inc_version_list.
 
+perl5 (perl5.U):
+       This variable contains the full path (if any) to a previously
+       installed perl5.005 or later suitable for running the script
+       to determine inc_version_list.
+
 perl (Loc.U):
        This variable is defined but not used by Configure.
        The value is a plain '' and is not useful.
@@ -4006,8 +4099,8 @@ sig_count (sig_name.U):
 
 sig_name (sig_name.U):
        This variable holds the signal names, space separated. The leading
-       SIG in signal name is removed.  A ZERO is prepended to the
-       list.  This is currently not used.
+       SIG in signal name is removed.  A ZERO is prepended to the list.
+       This is currently not used, sig_name_init is used instead.
 
 sig_name_init (sig_name.U):
        This variable holds the signal names, enclosed in double quotes and
@@ -4018,10 +4111,10 @@ sig_name_init (sig_name.U):
 
 sig_num (sig_name.U):
        This variable holds the signal numbers, space separated. A ZERO is
-       prepended to the list (corresponding to the fake SIGZERO), and 
-       the list is terminated with a 0.  Those numbers correspond to 
-       the value of the signal listed in the same place within the
-       sig_name list.
+       prepended to the list (corresponding to the fake SIGZERO).
+       Those numbers correspond to  the value of the signal listed
+       in the same place within the sig_name list.
+       This is currently not used, sig_num_init is used instead.
 
 sig_num_init (sig_name.U):
        This variable holds the signal numbers, enclosed in double quotes and
@@ -4066,6 +4159,36 @@ sitebinexp (sitebin.U):
        This is the same as the sitebin variable, but is filename expanded at
        configuration time, for use in your makefiles.
 
+sitehtml1 (sitehtml1.U):
+       This variable contains the name of the directory in which site-specific
+       html source pages are to be put.  It is the responsibility of the
+       Makefile.SH to get the value of this into the proper command.
+       You must be prepared to do the ~name expansion yourself.
+       The standard distribution will put nothing in this directory.
+       After perl has been installed, users may install their own local
+       html pages in this directory with
+       MakeMaker Makefile.PL
+       or equivalent.  See INSTALL for details.
+
+sitehtml1exp (sitehtml1.U):
+       This variable is the same as the sitehtml1 variable, but is filename
+       expanded at configuration time, for convenient use in makefiles.
+
+sitehtml3 (sitehtml3.U):
+       This variable contains the name of the directory in which site-specific
+       library html source pages are to be put.  It is the responsibility of the
+       Makefile.SH to get the value of this into the proper command.
+       You must be prepared to do the ~name expansion yourself.
+       The standard distribution will put nothing in this directory.
+       After perl has been installed, users may install their own local
+       library html pages in this directory with
+       MakeMaker Makefile.PL
+       or equivalent.  See INSTALL for details.
+
+sitehtml3exp (sitehtml3.U):
+       This variable is the same as the sitehtml3 variable, but is filename
+       expanded at configuration time, for convenient use in makefiles.
+
 sitelib (sitelib.U):
        This variable contains the eventual value of the SITELIB symbol,
        which is the name of the private library for this package.  It may
@@ -4086,6 +4209,36 @@ sitelibexp (sitelib.U):
        This variable is the ~name expanded version of sitelib, so that you
        may use it directly in Makefiles or shell scripts.
 
+siteman1 (siteman1.U):
+       This variable contains the name of the directory in which site-specific
+       manual source pages are to be put.  It is the responsibility of the
+       Makefile.SH to get the value of this into the proper command.
+       You must be prepared to do the ~name expansion yourself.
+       The standard distribution will put nothing in this directory.
+       After perl has been installed, users may install their own local
+       man1 pages in this directory with
+       MakeMaker Makefile.PL
+       or equivalent.  See INSTALL for details.
+
+siteman1exp (siteman1.U):
+       This variable is the same as the siteman1 variable, but is filename
+       expanded at configuration time, for convenient use in makefiles.
+
+siteman3 (siteman3.U):
+       This variable contains the name of the directory in which site-specific
+       library man source pages are to be put.  It is the responsibility of the
+       Makefile.SH to get the value of this into the proper command.
+       You must be prepared to do the ~name expansion yourself.
+       The standard distribution will put nothing in this directory.
+       After perl has been installed, users may install their own local
+       man3 pages in this directory with
+       MakeMaker Makefile.PL
+       or equivalent.  See INSTALL for details.
+
+siteman3exp (siteman3.U):
+       This variable is the same as the siteman3 variable, but is filename
+       expanded at configuration time, for convenient use in makefiles.
+
 siteprefix (siteprefix.U):
        This variable holds the full absolute path of the directory below
        which the user will install add-on packages.
@@ -4095,6 +4248,21 @@ siteprefixexp (siteprefix.U):
        This variable holds the full absolute path of the directory below
        which the user will install add-on packages.  Derived from siteprefix.
 
+sitescript (sitescript.U):
+       This variable holds the name of the directory in which the user wants
+       to put add-on publicly executable files for the package in question.  It
+       is most often a local directory such as /usr/local/bin. Programs using
+       this variable must be prepared to deal with ~name substitution.
+       The standard distribution will put nothing in this directory.
+       After perl has been installed, users may install their own local
+       scripts in this directory with
+       MakeMaker Makefile.PL
+       or equivalent.  See INSTALL for details.
+
+sitescriptexp (sitescript.U):
+       This is the same as the sitescript variable, but is filename expanded at
+       configuration time, for use in your makefiles.
+
 sizesize (sizesize.U):
        This variable contains the size of a sizetype in bytes.
 
@@ -4138,7 +4306,7 @@ spackage (package.U):
 
 spitshell (spitshell.U):
        This variable contains the command necessary to spit out a runnable
-       shell on this system.  It is either cat or a grep -v for # comments.
+       shell on this system.  It is either cat or a grep '-v' for # comments.
 
 srand48_r_proto (d_srand48_r.U):
        This variable encodes the prototype of srand48_r.
@@ -4367,6 +4535,11 @@ uquadtype (quadtype.U):
        unsigned int, unsigned long long, uint64_t, or whatever type is
        used for 64-bit integers.
 
+use5005threads (usethreads.U):
+       This variable conditionally defines the USE_5005THREADS symbol,
+       and indicates that Perl should be built to use the 5.005-based
+       threading implementation.
+
 use64bitall (use64bits.U):
        This variable conditionally defines the USE_64_BIT_ALL symbol,
        and indicates that 64-bit integer types should be used
@@ -4537,6 +4710,32 @@ vendorbinexp (vendorbin.U):
        This variable is the ~name expanded version of vendorbin, so that you
        may use it directly in Makefiles or shell scripts.
 
+vendorhtml1 (vendorhtml1.U):
+       This variable contains the name of the directory for html 
+       pages.  It may have a ~ on the front.
+       The standard distribution will put nothing in this directory.
+       Vendors who distribute perl may wish to place their own
+       html pages in this directory with
+       MakeMaker Makefile.PL INSTALLDIRS=vendor 
+       or equivalent.  See INSTALL for details.
+
+vendorhtml1exp (vendorhtml1.U):
+       This variable is the ~name expanded version of vendorhtml1, so that you
+       may use it directly in Makefiles or shell scripts.
+
+vendorhtml3 (vendorhtml3.U):
+       This variable contains the name of the directory for html 
+       library pages.  It may have a ~ on the front.
+       The standard distribution will put nothing in this directory.
+       Vendors who distribute perl may wish to place their own
+       html pages for modules and extensions in this directory with
+       MakeMaker Makefile.PL INSTALLDIRS=vendor 
+       or equivalent.  See INSTALL for details.
+
+vendorhtml3exp (vendorhtml3.U):
+       This variable is the ~name expanded version of vendorhtml3, so that you
+       may use it directly in Makefiles or shell scripts.
+
 vendorlib (vendorlib.U):
        This variable contains the eventual value of the VENDORLIB symbol,
        which is the name of the private library for this package.
@@ -4555,6 +4754,32 @@ vendorlibexp (vendorlib.U):
        This variable is the ~name expanded version of vendorlib, so that you
        may use it directly in Makefiles or shell scripts.
 
+vendorman1 (vendorman1.U):
+       This variable contains the name of the directory for man1 
+       pages.  It may have a ~ on the front.
+       The standard distribution will put nothing in this directory.
+       Vendors who distribute perl may wish to place their own
+       man1 pages in this directory with
+       MakeMaker Makefile.PL INSTALLDIRS=vendor 
+       or equivalent.  See INSTALL for details.
+
+vendorman1exp (vendorman1.U):
+       This variable is the ~name expanded version of vendorman1, so that you
+       may use it directly in Makefiles or shell scripts.
+
+vendorman3 (vendorman3.U):
+       This variable contains the name of the directory for man3 
+       pages.  It may have a ~ on the front.
+       The standard distribution will put nothing in this directory.
+       Vendors who distribute perl may wish to place their own
+       man3 pages in this directory with
+       MakeMaker Makefile.PL INSTALLDIRS=vendor 
+       or equivalent.  See INSTALL for details.
+
+vendorman3exp (vendorman3.U):
+       This variable is the ~name expanded version of vendorman3, so that you
+       may use it directly in Makefiles or shell scripts.
+
 vendorprefix (vendorprefix.U):
        This variable holds the full absolute path of the directory below
        which the vendor will install add-on packages.
@@ -4564,6 +4789,19 @@ vendorprefixexp (vendorprefix.U):
        This variable holds the full absolute path of the directory below
        which the vendor will install add-on packages.  Derived from vendorprefix.
 
+vendorscript (vendorscript.U):
+       This variable contains the eventual value of the VENDORSCRIPT symbol.
+       It may have a ~ on the front.
+       The standard distribution will put nothing in this directory.
+       Vendors who distribute perl may wish to place additional
+       executable scripts in this directory with
+       MakeMaker Makefile.PL INSTALLDIRS=vendor 
+       or equivalent.  See INSTALL for details.
+
+vendorscriptexp (vendorscript.U):
+       This variable is the ~name expanded version of vendorscript, so that you
+       may use it directly in Makefiles or shell scripts.
+
 version (patchlevel.U):
        The full version number of this package, such as 5.6.1 (or 5_6_1).
        This combines revision, patchlevel, and subversion to get the
@@ -4623,10 +4861,6 @@ xs_apiversion (xs_apiversion.U):
        though in principle we could go snooping around in old
        Config.pm files.
 
-yacc (yacc.U):
-       This variable holds the name of the compiler compiler we
-       want to use in the Makefile. It can be yacc, byacc, or bison -y.
-
 yaccflags (yacc.U):
        This variable contains any additional yacc flags desired by the
        user.  It is up to the Makefile to use this.

diff --git a/Porting/config.sh b/Porting/config.sh
index 9ef72ab..8495b37 100644 (file)
--- a/Porting/config.sh
+++ b/Porting/config.sh
@@ -8,9 +8,9 @@
 
 # Package name      : perl5
 # Source directory  : .
-# Configuration time: Thu Mar  6 08:37:41 EET 2003
+# Configuration time: Fri Mar 14 12:30:38 EET 2003
 # Configured by     : jhi
-# Target system     : osf1 kosh.hut.fi v4.0 1229 alpha 
+# Target system     : osf1 kosh.hut.fi v5.1 2650 alpha 
 
 Author=''
 Date='$Date'
@@ -59,11 +59,11 @@ ccdlflags='  -Wl,-rpath,/opt/perl/lib/5.9.0/alpha-dec_osf/CORE'
 ccflags='-std -D_INTRINSICS -fprm d -ieee -DLANGUAGE_C'
 ccflags_uselargefiles=''
 ccname='cc'
-ccsymbols='LANGUAGE_C=1 SYSTYPE_BSD=1 _LONGLONG=1 _SYSTYPE_BSD=1 __Alpha_AXP=1 __DATE__="Mar __DECC=1 __DECC_MODE_COMMON=1 __DECC_VER=50990011 __IEEE_FLOAT=1 __INITIAL_POINTER_SIZE=0 __PRAGMA_ENVIRONMENT=1 __TIME__="08:38:22" __X_FLOAT=0 unix=1'
-ccversion='V5.9-011'
+ccsymbols='__alpha=1 __ALPHA=1 __Alpha_AXP=1 __arch64__=1 __DATE__="Mar __DECC=1 __DECC_MODE_RELAXED=1 __DECC_VER=60590011 __digital__=1 __IEEE_FLOAT=1 __INITIAL_POINTER_SIZE=0 __LANGUAGE_C__=1 __osf__=1 __PRAGMA_ENVIRONMENT=1 __STDC__=0 __STDC_HOSTED__=1 __STDC_VERSION__=199901L __TIME__="12:31:32" __unix__=1 __X_FLOAT=1 _LONGLONG=1 _SYSTYPE_BSD=1'
+ccversion='V6.5-011'
 cf_by='jhi'
 cf_email='yourname@yourhost.yourplace.com'
-cf_time='Thu Mar  6 08:37:41 EET 2003'
+cf_time='Fri Mar 14 12:30:38 EET 2003'
 charsize='1'
 chgrp=''
 chmod='chmod'
@@ -76,13 +76,13 @@ cp='cp'
 cpio=''
 cpp='cpp'
 cpp_stuff='42'
-cppccsymbols='__ALPHA=1 __LANGUAGE_C__=1 __alpha=1 __osf__=1 __unix__=1'
-cppflags='-D_INTRINSICS -DLANGUAGE_C'
-cpplast=''
-cppminus=''
-cpprun='/usr/local/bin/cpp'
-cppstdin='cppstdin'
-cppsymbols='_AES_SOURCE=1 _ANSI_C_SOURCE=1 _INTRINSICS=1 LANGUAGE_C=1 _LONGLONG=1 _OSF_SOURCE=1 _POSIX_C_SOURCE=199506 _POSIX_SOURCE=1 __STDC__=1 _SYSTYPE_BSD=1 _XOPEN_SOURCE=1'
+cppccsymbols=''
+cppflags='-std -D_INTRINSICS -fprm d -ieee -DLANGUAGE_C'
+cpplast='-'
+cppminus='-'
+cpprun='cc -E'
+cppstdin='cc -E'
+cppsymbols='_AES_SOURCE=1 __alpha=1 __ALPHA=1 _ANSI_C_SOURCE=1 _INTRINSICS=1 LANGUAGE_C=1 __LANGUAGE_C__=1 _LONGLONG=1 __osf__=1 _OSF_SOURCE=1 _POSIX_C_SOURCE=199506 _POSIX_SOURCE=1 __STDC__=1 _SYSTYPE_BSD=1 __unix__=1 _XOPEN_SOURCE=400'
 crypt_r_proto='0'
 cryptlib=''
 csh='csh'
@@ -183,12 +183,12 @@ d_fpclassl='undef'
 d_fpos64_t='undef'
 d_frexpl='define'
 d_fs_data_s='undef'
-d_fseeko='undef'
+d_fseeko='define'
 d_fsetpos='define'
 d_fstatfs='define'
 d_fstatvfs='define'
 d_fsync='define'
-d_ftello='undef'
+d_ftello='define'
 d_ftime='undef'
 d_getcwd='define'
 d_getespwnam='undef'
@@ -280,13 +280,13 @@ d_memcpy='define'
 d_memmove='define'
 d_memset='define'
 d_mkdir='define'
-d_mkdtemp='undef'
+d_mkdtemp='define'
 d_mkfifo='define'
 d_mkstemp='define'
-d_mkstemps='undef'
+d_mkstemps='define'
 d_mktime='define'
 d_mmap='define'
-d_modfl='undef'
+d_modfl='define'
 d_modfl_pow32_bug='undef'
 d_modflproto='undef'
 d_mprotect='define'
@@ -321,7 +321,7 @@ d_pipe='define'
 d_poll='define'
 d_portable='define'
 d_procselfexe='undef'
-d_pthread_atfork='define'
+d_pthread_atfork='undef'
 d_pthread_yield='undef'
 d_pwage='undef'
 d_pwchange='undef'
@@ -347,7 +347,7 @@ d_safebcpy='undef'
 d_safemcpy='undef'
 d_sanemcmp='define'
 d_sbrkproto='define'
-d_sched_yield='define'
+d_sched_yield='undef'
 d_scm_rights='define'
 d_seekdir='define'
 d_select='define'
@@ -431,7 +431,7 @@ d_strerror_r='undef'
 d_strftime='define'
 d_strtod='define'
 d_strtol='define'
-d_strtold='undef'
+d_strtold='define'
 d_strtoll='undef'
 d_strtoq='undef'
 d_strtoul='define'
@@ -441,7 +441,7 @@ d_strxfrm='define'
 d_suidsafe='undef'
 d_symlink='define'
 d_syscall='define'
-d_syscallproto='undef'
+d_syscallproto='define'
 d_sysconf='define'
 d_sysernlst=''
 d_syserrlst='define'
@@ -465,7 +465,7 @@ d_uname='define'
 d_union_semun='undef'
 d_unordered='define'
 d_usleep='define'
-d_usleepproto='undef'
+d_usleepproto='define'
 d_ustat='define'
 d_vendorarch='undef'
 d_vendorbin='undef'
@@ -723,7 +723,7 @@ lns='/usr/bin/ln -s'
 localtime_r_proto='0'
 locincpth='/usr/local/include /opt/local/include /usr/gnu/include /opt/gnu/include /usr/GNU/include /opt/GNU/include'
 loclibpth='/usr/local/lib /opt/local/lib /usr/gnu/lib /opt/gnu/lib /usr/GNU/lib /opt/GNU/lib'
-longdblsize='8'
+longdblsize='16'
 longlongsize='8'
 longsize='8'
 lp=''
@@ -754,7 +754,7 @@ mv=''
 myarchname='alpha-dec_osf'
 mydomain='.yourplace.com'
 myhostname='yourhost'
-myuname='osf1 kosh.hut.fi v4.0 1229 alpha '
+myuname='osf1 kosh.hut.fi v5.1 2650 alpha '
 n=''
 need_va_copy='undef'
 netdb_hlen_type='int'
@@ -781,7 +781,7 @@ old_pthread_create_joinable=''
 optimize='-O4'
 orderlib='false'
 osname='dec_osf'
-osvers='4.0f'
+osvers='5.1b'
 otherlibdirs=' '
 package='perl5'
 pager='/usr/local/bin/less'
@@ -823,20 +823,20 @@ rm='rm'
 rmail=''
 run=''
 runnm='true'
-sPRIEUldbl='"E"'
-sPRIFUldbl='"F"'
-sPRIGUldbl='"G"'
+sPRIEUldbl='"LE"'
+sPRIFUldbl='"LF"'
+sPRIGUldbl='"LG"'
 sPRIXU64='"lX"'
 sPRId64='"ld"'
-sPRIeldbl='"e"'
-sPRIfldbl='"f"'
-sPRIgldbl='"g"'
+sPRIeldbl='"Le"'
+sPRIfldbl='"Lf"'
+sPRIgldbl='"Lg"'
 sPRIi64='"li"'
 sPRIo64='"lo"'
 sPRIu64='"lu"'
 sPRIx64='"lx"'
-sSCNfldbl='"f"'
-sched_yield='sched_yield()'
+sSCNfldbl='"Lf"'
+sched_yield='undef'
 scriptdir='/opt/perl/bin'
 scriptdirexp='/opt/perl/bin'
 sed='sed'
@@ -902,7 +902,7 @@ ssizetype='ssize_t'
 startperl='#!/opt/perl/bin/perl5.9.0'
 startsh='#!/bin/sh'
 static_ext=' '
-stdchar='unsigned char'
+stdchar='char'
 stdio_base='((fp)->_base)'
 stdio_bufsiz='((fp)->_cnt + (fp)->_ptr - (fp)->_base)'
 stdio_cnt='((fp)->_cnt)'
@@ -1027,5 +1027,5 @@ PERL_API_SUBVERSION=0
 PERL_PATCHLEVEL=18374
 PERL_CONFIG_SH=true
 # Variables propagated from previous config.sh file.
-pp_sys_cflags='ccflags="$ccflags -DNO_EFF_ONLY_OK"'
+pp_sys_cflags=''
 toke_cflags=''

diff --git a/Porting/config_H b/Porting/config_H
index d47bd40..d2d11b5 100644 (file)
--- a/Porting/config_H
+++ b/Porting/config_H
@@ -17,9 +17,9 @@
 /*
  * Package name      : perl5
  * Source directory  : .
- * Configuration time: Thu Mar  6 08:37:41 EET 2003
+ * Configuration time: Fri Mar 14 12:30:38 EET 2003
  * Configured by     : jhi
- * Target system     : osf1 kosh.hut.fi v4.0 1229 alpha 
+ * Target system     : osf1 kosh.hut.fi v5.1 2650 alpha 
  */
 
 #ifndef _config_h_
@@ -1477,7 +1477,7 @@
  *     feature tests from Configure are generally more reliable.
  */
 #define OSNAME "dec_osf"               /**/
-#define OSVERS "4.0f"          /**/
+#define OSVERS "5.1b"          /**/
 
 /* CAT2:
  *     This macro catenates 2 tokens together.
@@ -1528,10 +1528,10 @@
  *     This symbol is intended to be used along with CPPRUN in the same manner
  *     symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "".
  */
-#define CPPSTDIN "cppstdin"
-#define CPPMINUS ""
-#define CPPRUN "/usr/local/bin/cpp"
-#define CPPLAST ""
+#define CPPSTDIN "cc -E"
+#define CPPMINUS "-"
+#define CPPRUN "cc -E"
+#define CPPLAST "-"
 
 /* HAS_ACCESS:
  *     This manifest constant lets the C program know that the access()
@@ -1790,7 +1790,7 @@
  */
 #define HAS_LONG_DOUBLE                /**/
 #ifdef HAS_LONG_DOUBLE
-#define LONG_DOUBLESIZE 8              /**/
+#define LONG_DOUBLESIZE 16             /**/
 #endif
 
 /* HAS_LONG_LONG:
@@ -2193,7 +2193,9 @@
  *     etc., where nn is the actual signal number (e.g. NUM37).
  *     The signal number for sig_name[i] is stored in sig_num[i].
  *     The last element is 0 to terminate the list with a NULL.  This
- *     corresponds to the 0 at the end of the sig_num list.
+ *     corresponds to the 0 at the end of the sig_name_init list.
+ *     Note that this variable is initialized from the sig_name_init,
+ *     not from sig_name (which is unused).
  */
 /* SIG_NUM:
  *     This symbol contains a list of signal numbers, in the same order as the
@@ -2207,7 +2209,9 @@
  *     The signal number corresponding to sig_name[i] is sig_number[i].
  *     if (i < NSIG) then sig_number[i] == i.  
  *     The last element is 0, corresponding to the 0 at the end of
- *     the sig_name list.
+ *     the sig_name_init list.
+ *     Note that this variable is initialized from the sig_num_init,
+ *     not from sig_num (which is unused).
  */
 /* SIG_SIZE:
  *     This variable contains the number of elements of the sig_name
@@ -2221,7 +2225,7 @@
  *     This symbol is defined to be the type of char used in stdio.h.
  *     It has the values "unsigned char" or "char".
  */
-#define STDCHAR unsigned char  /**/
+#define STDCHAR char   /**/
 
 /* VOIDFLAGS:
  *     This symbol indicates how much support of the void type is given by this
@@ -2448,7 +2452,7 @@
  *     This symbol, if defined, indicates that the fseeko routine is
  *     available to fseek beyond 32 bits (useful for ILP32 hosts).
  */
-/*#define HAS_FSEEKO           / **/
+#define HAS_FSEEKO             /**/
 
 /* HAS_FSTATFS:
  *     This symbol, if defined, indicates that the fstatfs routine is
@@ -2467,7 +2471,7 @@
  *     This symbol, if defined, indicates that the ftello routine is
  *     available to ftell beyond 32 bits (useful for ILP32 hosts).
  */
-/*#define HAS_FTELLO           / **/
+#define HAS_FTELLO             /**/
 
 /* HAS_GETCWD:
  *     This symbol, if defined, indicates that the getcwd routine is
@@ -2572,14 +2576,14 @@
  *     This symbol, if defined, indicates that the mkdtemp routine is
  *     available to exclusively create a uniquely named temporary directory.
  */
-/*#define HAS_MKDTEMP          / **/
+#define HAS_MKDTEMP            /**/
 
 /* HAS_MKSTEMPS:
  *     This symbol, if defined, indicates that the mkstemps routine is
  *     available to excluslvely create and open a uniquely named
  *     (with a suffix) temporary file.
  */
-/*#define HAS_MKSTEMPS         / **/
+#define HAS_MKSTEMPS           /**/
 
 /* HAS_MODFL:
  *     This symbol, if defined, indicates that the modfl routine is
@@ -2598,7 +2602,7 @@
  *     and 1.150000.  The bug has been seen in certain versions of glibc,
  *     release 2.2.2 is known to be okay.
  */
-/*#define HAS_MODFL            / **/
+#define HAS_MODFL              /**/
 /*#define HAS_MODFL_PROTO              / **/
 /*#define HAS_MODFL_POW32_BUG          / **/
 
@@ -2774,7 +2778,7 @@
  *     This symbol, if defined, indicates that the strtold routine is
  *     available to convert strings to long doubles.
  */
-/*#define HAS_STRTOLD          / **/
+#define HAS_STRTOLD            /**/
 
 /* HAS_STRTOLL:
  *     This symbol, if defined, indicates that the strtoll routine is
@@ -2807,7 +2811,7 @@
  *             extern int syscall(int,  ...);
  *             extern int syscall(long, ...);
  */
-/*#define      HAS_SYSCALL_PROTO       / **/
+#define        HAS_SYSCALL_PROTO       /**/
 
 /* HAS_TELLDIR_PROTO:
  *     This symbol, if defined, indicates that the system provides
@@ -2844,7 +2848,7 @@
  *     to the program to supply one.  A good guess is
  *             extern int usleep(useconds_t);
  */
-/*#define      HAS_USLEEP_PROTO        / **/
+#define        HAS_USLEEP_PROTO        /**/
 
 /* HAS_USTAT:
  *     This symbol, if defined, indicates that the ustat system call is
@@ -3055,10 +3059,10 @@
  *     This symbol, if defined, contains the string used by stdio to
  *     format long doubles (format 'f') for input.
  */
-#define PERL_PRIfldbl  "f"     /**/
-#define PERL_PRIgldbl  "g"     /**/
-#define PERL_PRIeldbl  "e"     /**/
-#define PERL_SCNfldbl  "f"     /**/
+#define PERL_PRIfldbl  "Lf"    /**/
+#define PERL_PRIgldbl  "Lg"    /**/
+#define PERL_PRIeldbl  "Le"    /**/
+#define PERL_SCNfldbl  "Lf"    /**/
 
 /* NEED_VA_COPY:
  *     This symbol, if defined, indicates that the system stores
@@ -3886,7 +3890,7 @@
  *     This symbol, if defined, indicates that the pthread_atfork routine
  *     is available setup fork handlers.
  */
-#define HAS_PTHREAD_ATFORK             /**/
+/*#define HAS_PTHREAD_ATFORK           / **/
 
 /* HAS_PTHREAD_YIELD:
  *     This symbol, if defined, indicates that the pthread_yield 
@@ -3904,8 +3908,8 @@
  *     thread.  sched_yield is preferable to pthread_yield.
  */
 /*#define HAS_PTHREAD_YIELD    / **/
-#define SCHED_YIELD    sched_yield()   /**/
-#define HAS_SCHED_YIELD        /**/
+#define SCHED_YIELD    undef   /**/
+/*#define HAS_SCHED_YIELD      / **/
 
 /* HAS_RANDOM_R:
  *     This symbol, if defined, indicates that the random_r routine

diff --git a/config_h.SH b/config_h.SH
index 8e16bb8..7ac00df 100644 (file)
--- a/config_h.SH
+++ b/config_h.SH
@@ -2213,7 +2213,9 @@ sed <<!GROK!THIS! >$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un
  *     etc., where nn is the actual signal number (e.g. NUM37).
  *     The signal number for sig_name[i] is stored in sig_num[i].
  *     The last element is 0 to terminate the list with a NULL.  This
- *     corresponds to the 0 at the end of the sig_num list.
+ *     corresponds to the 0 at the end of the sig_name_init list.
+ *     Note that this variable is initialized from the sig_name_init,
+ *     not from sig_name (which is unused).
  */
 /* SIG_NUM:
  *     This symbol contains a list of signal numbers, in the same order as the
@@ -2227,7 +2229,9 @@ sed <<!GROK!THIS! >$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un
  *     The signal number corresponding to sig_name[i] is sig_number[i].
  *     if (i < NSIG) then sig_number[i] == i.  
  *     The last element is 0, corresponding to the 0 at the end of
- *     the sig_name list.
+ *     the sig_name_init list.
+ *     Note that this variable is initialized from the sig_num_init,
+ *     not from sig_num (which is unused).
  */
 /* SIG_SIZE:
  *     This variable contains the number of elements of the sig_name