# $Id: Head.U,v 3.0.1.8 1995/07/25 13:40:02 ram Exp $
#
-# Generated on Thu Oct 10 15:08:34 EDT 1996 [metaconfig 3.0 PL60]
+# Generated on Sat Feb 1 00:26:40 EST 1997 [metaconfig 3.0 PL60]
cat >/tmp/c1$$ <<EOF
ARGGGHHHH!!!!!
exit 1
fi
-: On HP-UX, large Configure scripts may exercise a bug in /bin/sh
-if test -f /hp-ux -a -f /bin/ksh; then
- if (PATH=.; alias -x) >/dev/null 2>&1; then
- : already under /bin/ksh
- else
+: Test and see if we are running under ksh, either blatantly or in disguise.
+if (PATH=.; alias -x) >/dev/null 2>&1; then
+ : running under ksh. Is this a good thing?
+ if test -d /usr/lpp -a -f /usr/bin/bsh -a -f /usr/bin/uname ; then
+ if test X`/usr/bin/uname -v` = X4 ; then
+ : on AIX 4, /bin/sh is really ksh, and it causes us problems.
+ : Avoid it
cat <<'EOM'
-(Feeding myself to ksh to avoid nasty sh bug in "here document" expansion.)
+(Feeding myself to /usr/bin/bsh to avoid AIX 4's /bin/sh.)
EOM
unset ENV
- exec /bin/ksh $0 "$@"
+ exec /usr/bin/bsh $0 "$@"
fi
-else
+ else
+ if test ! -f /hp-ux ; then
: Warn them if they use ksh on other systems
- (PATH=.; alias -x) >/dev/null 2>&1 && \
cat <<EOM
(I see you are using the Korn shell. Some ksh's blow up on $me,
especially on older exotic systems. If yours does, try the Bourne
shell instead.)
EOM
+ fi
+ fi
+else
+ : Not running under ksh. Maybe we should be?
+ : On HP-UX, large Configure scripts may exercise a bug in /bin/sh
+ if test -f /hp-ux -a -f /bin/ksh; then
+ cat <<'EOM'
+(Feeding myself to ksh to avoid nasty sh bug in "here document" expansion.)
+EOM
+ unset ENV
+ exec /bin/ksh $0 "$@"
+ fi
fi
: Configure runs within the UU subdirectory
bin=''
binexp=''
installbin=''
+bincompat3=''
+d_bincompat3=''
byteorder=''
cc=''
gccversion=''
d_flock=''
d_fork=''
d_fsetpos=''
+d_ftime=''
+d_gettimeod=''
d_Gconvert=''
d_getgrps=''
+d_setgrps=''
d_gethent=''
aphostname=''
d_gethname=''
d_getprior=''
d_gnulibc=''
d_htonl=''
+d_inetaton=''
d_isascii=''
d_killpg=''
d_link=''
d_rmdir=''
d_safebcpy=''
d_safemcpy=''
+d_sanemcmp=''
d_select=''
d_sem=''
d_semctl=''
stdio_base=''
stdio_bufsiz=''
stdio_cnt=''
-stdio_filbuf=''
stdio_ptr=''
d_index=''
d_strchr=''
i_varhdr=''
i_vfork=''
intsize=''
+longsize=''
+shortsize=''
libc=''
libperl=''
shrpenv=''
'') cat <<EOM >&2
$me: Fatal Error: I can't find a Bourne Shell anywhere.
Usually it's in /bin/sh. How did you even get this far?
-Please contact me (Andy Dougherty) at doughera@lafcol.lafayette.edu and
+Please contact me (Chip Salzenberg) at chip@perl.com and
we'll try to straigten this all out.
EOM
exit 1
CONFIG=true
echo "Doing variable substitutions on .SH files..."
if test -f MANIFEST; then
- shlist=`awk '!/^old_/ {print $1}' <MANIFEST | grep '\.SH$'`
+ shlist=`awk '{print $1}' <MANIFEST | grep '\.SH'`
: Pick up possible extension manifests.
for dir in ext/* ; do
if test -f $dir/MANIFEST; then
- xxx=`awk '!/^old_/ {print $1}' < $dir/MANIFEST |
+ xxx=`awk '{print $1}' < $dir/MANIFEST |
sed -n "/\.SH$/ s@^@$dir/@p"`
shlist="$shlist $xxx"
fi
set x $shlist
else
echo "(Looking for .SH files under the current directory.)"
- set x `find . -name "*.SH" -print | grep -v '/old_'`
+ set x `find . -name "*.SH" -print`
fi
shift
case $# in
extractsh=''
override=''
knowitall=''
+
rm -f optdef.sh
+cat >optdef.sh <<EOS
+$startsh
+EOS
: option parsing
while test $# -gt 0; do
You have the option of continuing the configuration process, despite the
distinct possibility that your kit is damaged, by typing 'y'es. If you
do, don't blame me if something goes wrong. I advise you to type 'n'o
-and contact the author (doughera@lafcol.lafayette.edu).
+and contact the author (chip@perl.com).
EOM
echo $n "Continue? [n] $c" >&4
: now set up to do reads with possible shell escape and default assignment
cat <<EOSC >myread
+$startsh
xxxm=\$dflt
$myecho
ans='!'
read answ
set x \$xxxm
shift
- aok=''; eval "ans=\"\$answ\"" && aok=y
+ aok=''; eval ans="\\"\$answ\\"" && aok=y
case "\$answ" in
"\$ans")
case "\$ans" in
Unix system. If despite that it blows up on yours, your best bet is to edit
Configure and run it again. If you can't run Configure for some reason,
you'll have to generate a config.sh file by hand. Whatever problems you
-have, let me (doughera@lafcol.lafayette.edu) know how I blew it.
+have, let me (chip@perl.com) know how I blew it.
This installation script affects things in two ways:
cd hints; ls -C *.sh | $sed 's/\.sh/ /g' >&4
dflt=''
: Half the following guesses are probably wrong... If you have better
- : tests or hints, please send them to doughera@lafcol.lafayette.edu
+ : tests or hints, please send them to chip@perl.com
: The metaconfig authors would also appreciate a copy...
$test -f /irix && osname=irix
$test -f /xenix && osname=sco_xenix
$test -f /dynix && osname=dynix
$test -f /dnix && osname=dnix
- $test -f /unicos && osname=unicos && osvers=`$uname -r`
+ $test -f /lynx.os && osname=lynxos
+ $test -f /unicos && osname=unicos && osvers=`$uname -r`
+ $test -f /unicosmk.ar && osname=unicosmk && osvers=`$uname -r`
$test -f /bin/mips && /bin/mips && osname=mips
$test -d /NextApps && set X `hostinfo | grep 'NeXT Mach.*:' | \
$sed -e 's/://' -e 's/\./_/'` && osname=next && osvers=$4
*) osvers=$tmp;;
esac
;;
+ *dc.osx) osname=dcosx
+ osvers="$3"
+ ;;
dnix) osname=dnix
osvers="$3"
;;
ultrix) osname=ultrix
osvers="$3"
;;
- osf1) case "$5" in
+ osf1|mls+) case "$5" in
alpha)
osname=dec_osf
osvers=`echo "$3" | sed 's/^[vt]//'`
$2) case "$osname" in
*isc*) ;;
*freebsd*) ;;
- svr*)
+ svr*)
: svr4.x or possibly later
case "svr$3" in
${osname}*)
tarch=`arch`"-$osname"
elif xxx=`./loc uname blurfl $pth`; $test -f "$xxx" ; then
if uname -m > tmparch 2>&1 ; then
- tarch=`$sed -e 's/ /_/g' -e 's/_*$//' -e 's/$/'"-$osname/" tmparch`
+ tarch=`$sed -e 's/ *$//' -e 's/ /_/g' \
+ -e 's/$/'"-$osname/" tmparch`
else
tarch="$osname"
fi
$eunicefix filexp
: now set up to get a file name
-cat <<'EOSC' >getfile
+cat <<EOS >getfile
+$startsh
+EOS
+cat <<'EOSC' >>getfile
tilde=''
fullpath=''
already=''
patchlevel=0
subversion=0
fi
-echo "(You have $package $baserev patchlevel $patchlevel subversion $subversion.)"
+$echo $n "(You have $package" $c
+case "$package" in
+"*$baserev") ;;
+*) $echo $n " $baserev" $c ;;
+esac
+$echo $n " patchlevel $patchlevel" $c
+test 0 -eq "$subversion" || $echo $n " subversion $subversion" $c
+echo ".)"
: set the prefixup variable, to restore leading tilda escape
prefixup='case "$prefixexp" in
eval $prefixit
case "$archlib" in
'')
- case "$privlib" in
- '') dflt=`./loc . "." $prefixexp/lib /usr/local/lib /usr/lib /lib`
- set dflt
- eval $prefixup
- ;;
- *) version=`LC_ALL=C;export LC_ALL;\
- echo $baserev $patchlevel $subversion | \
- $awk '{print $1 + $2/1000.0 + $3/100000.0}'`
- dflt="$privlib/$archname/$version"
- ;;
- esac
+ case "$privlib" in
+ '') dflt=`./loc . "." $prefixexp/lib /usr/local/lib /usr/lib /lib`
+ set dflt
+ eval $prefixup
+ ;;
+ *) if test 0 -eq "$subversion"; then
+ version=`LC_ALL=C; export LC_ALL; \
+ echo $baserev $patchlevel | \
+ $awk '{ printf "%.3f\n", $1 + $2/1000.0 }'`
+ else
+ version=`LC_ALL=C; export LC_ALL; \
+ echo $baserev $patchlevel $subversion | \
+ $awk '{ printf "%.5f\n", $1 + $2/1000.0 + $3/100000.0 }'`
+ fi
+ dflt="$privlib/$archname/$version"
;;
-*) dflt="$archlib";;
+ esac
+ ;;
+*)
+ dflt="$archlib"
+ ;;
esac
cat <<EOM
fi
: set up the script used to warn in case of inconsistency
-cat <<'EOSC' >whoa
+cat <<EOS >whoa
+$startsh
+EOS
+cat <<'EOSC' >>whoa
dflt=y
echo " "
echo "*** WHOA THERE!!! ***" >&4
*) eval "$var=$val";;
esac'
+$cat <<EOM
+
+Perl 5.004 can be compiled for binary compatibility with 5.003.
+If you decide to do so, you will be able to continue using any
+extensions that were compiled for Perl 5.003. However, binary
+compatibility forces Perl to expose some of its internal symbols
+in the same way that 5.003 did. So you may have symbol conflicts
+if you embed a binary-compatible Perl in other programs.
+
+EOM
+case "$d_bincompat3" in
+"$undef") dflt=n ;;
+*) dflt=y ;;
+esac
+rp='Binary compatibility with Perl 5.003?'
+. ./myread
+case "$ans" in
+y*) val="$define" ;;
+*) val="$undef" ;;
+esac
+set d_bincompat3
+eval $setvar
+case "$d_bincompat3" in
+"$define") bincompat3=y ;;
+*) bincompat3=n ;;
+esac
+
: make some quick guesses about what we are up against
echo " "
$echo $n "Hmm... $c"
*) libpth="$ans";;
esac
+: Define several unixisms. Hints files or command line options
+: can be used to override them.
+case "$ar" in
+'') ar='ar';;
+esac
+case "$lib_ext" in
+'') lib_ext='.a';;
+esac
+case "$obj_ext" in
+'') obj_ext='.o';;
+esac
+case "$path_sep" in
+'') path_sep=':';;
+esac
+: Which makefile gets called first. This is used by make depend.
+case "$firstmakefile" in
+'') firstmakefile='makefile';;
+esac
+
: compute shared library extension
case "$so" in
'')
. ./myread
so="$ans"
-: If no lib_ext yet, assume '.a'.
-case "$lib_ext" in
-'') lib_ext='.a';;
-esac
-
: Looking for optional libraries
echo " "
echo "Checking for optional libraries..." >&4
*"-l$thislib "*);;
*) dflt="$dflt -l$thislib";;
esac
- elif xxx=`./loc lib$thislib${lib_ext} X $libpth`; $test -f "$xxx"; then
+ elif xxx=`./loc lib$thislib$lib_ext X $libpth`; $test -f "$xxx"; then
echo "Found -l$thislib."
case " $dflt " in
*"-l$thislib "*);;
*) dflt="$dflt -l$thislib";;
esac
- elif xxx=`./loc $thislib${lib_ext} X $libpth`; $test -f "$xxx"; then
+ elif xxx=`./loc $thislib$lib_ext X $libpth`; $test -f "$xxx"; then
echo "Found -l$thislib."
case " $dflt " in
*"-l$thislib "*);;
*) dflt="$dflt -l$thislib";;
esac
- elif xxx=`./loc lib${thislib}_s${lib_ext} X $libpth`; $test -f "$xxx"; then
+ elif xxx=`./loc lib${thislib}_s$lib_ext X $libpth`; $test -f "$xxx"; then
echo "Found -l${thislib}_s."
case " $dflt " in
*"-l$thislib "*);;
*) dflt="$dflt -l${thislib}_s";;
esac
- elif xxx=`./loc Slib$thislib${lib_ext} X $xlibpth`; $test -f "$xxx"; then
+ elif xxx=`./loc Slib$thislib$lib_ext X $xlibpth`; $test -f "$xxx"; then
echo "Found -l$thislib."
case " $dflt " in
*"-l$thislib "*);;
: determine optimize, if desired, or use for debug flag also
case "$optimize" in
-' ') dflt='none';;
+' '|$undef) dflt='none';;
'') dflt='-O';;
*) dflt="$optimize";;
esac
else
set signal.h LANGUAGE_C; eval $inctest
fi
-set signal.h NO_PROTOTYPE; eval $inctest
-set signal.h _NO_PROTO; eval $inctest
case "$hint" in
none|recommended) dflt="$ccflags $dflt" ;;
: coherency check
echo " "
-echo "Checking your choice of C compiler and flags for coherency..." >&4
-set X $cc $optimize $ccflags $ldflags try.c -o try
+echo "Checking your choice of C compiler, libs, and flags for coherency..." >&4
+set X $cc $optimize $ccflags $ldflags -o try try.c $libs
shift
$cat >try.msg <<EOM
I've tried to compile and run a simple program with:
main() { exit(0); }
EOF
dflt=y
-if sh -c "$cc $optimize $ccflags try.c -o try $ldflags" >>try.msg 2>&1; then
+if sh -c "$cc $optimize $ccflags -o try try.c $ldflags $libs" >>try.msg 2>&1; then
if sh -c './try' >>try.msg 2>&1; then
dflt=n
else
: nm options which may be necessary
case "$nm_opt" in
'') if $test -f /mach_boot; then
- nm_opt=''
+ nm_opt='' # Mach
elif $test -d /usr/ccs/lib; then
- nm_opt='-p'
+ nm_opt='-p' # Solaris (and SunOS?)
elif $test -f /dgux; then
- nm_opt='-p'
+ nm_opt='-p' # DG-UX
+ elif $test -f /lib64/rld; then
+ nm_opt='-p' # 64-bit Irix
else
nm_opt=''
fi;;
case "$libc" in
'') libc=unknown
case "$libs" in
- *-lc_s*) libc=`./loc libc_s${lib_ext} $libc $libpth`
+ *-lc_s*) libc=`./loc libc_s$lib_ext $libc $libpth`
esac
;;
esac
:
elif try=`./loc lib$thislib.$so X $libpth`; $test -f "$try"; then
:
- elif try=`./loc lib$thislib${lib_ext} X $libpth`; $test -f "$try"; then
+ elif try=`./loc lib$thislib$lib_ext X $libpth`; $test -f "$try"; then
:
- elif try=`./loc $thislib${lib_ext} X $libpth`; $test -f "$try"; then
+ elif try=`./loc $thislib$lib_ext X $libpth`; $test -f "$try"; then
:
elif try=`./loc lib$thislib X $libpth`; $test -f "$try"; then
:
elif try=`./loc $thislib X $libpth`; $test -f "$try"; then
:
- elif try=`./loc Slib$thislib${lib_ext} X $xlibpth`; $test -f "$try"; then
+ elif try=`./loc Slib$thislib$lib_ext X $xlibpth`; $test -f "$try"; then
:
else
try=''
eval set \$$#
done
$test -r $1 || set /usr/ccs/lib/libc.$so
- $test -r $1 || set /lib/libsys_s.a
+ $test -r $1 || set /lib/libsys_s$lib_ext
;;
*)
set blurfl
fi
elif $test -r "$libc" || (test -h "$libc") >/dev/null 2>&1; then
echo "Your C library seems to be in $libc, as you said before."
-elif $test -r $incpath/usr/lib/libc${lib_ext}; then
- libc=$incpath/usr/lib/libc${lib_ext};
+elif $test -r $incpath/usr/lib/libc$lib_ext; then
+ libc=$incpath/usr/lib/libc$lib_ext;
echo "Your C library seems to be in $libc. That's fine."
-elif $test -r /lib/libc${lib_ext}; then
- libc=/lib/libc${lib_ext};
+elif $test -r /lib/libc$lib_ext; then
+ libc=/lib/libc$lib_ext;
echo "Your C library seems to be in $libc. You're normal."
else
- if tans=`./loc libc${lib_ext} blurfl/dyick $libpth`; $test -r "$tans"; then
+ if tans=`./loc libc$lib_ext blurfl/dyick $libpth`; $test -r "$tans"; then
:
elif tans=`./loc libc blurfl/dyick $libpth`; $test -r "$tans"; then
libnames="$libnames "`./loc clib blurfl/dyick $libpth`
elif tans=`./loc clib blurfl/dyick $libpth`; $test -r "$tans"; then
:
- elif tans=`./loc Slibc${lib_ext} blurfl/dyick $xlibpth`; $test -r "$tans"; then
+ elif tans=`./loc Slibc$lib_ext blurfl/dyick $xlibpth`; $test -r "$tans"; then
:
- elif tans=`./loc Mlibc${lib_ext} blurfl/dyick $xlibpth`; $test -r "$tans"; then
+ elif tans=`./loc Mlibc$lib_ext blurfl/dyick $xlibpth`; $test -r "$tans"; then
:
else
- tans=`./loc Llibc${lib_ext} blurfl/dyick $xlibpth`
+ tans=`./loc Llibc$lib_ext blurfl/dyick $xlibpth`
fi
if $test -r "$tans"; then
echo "Your C library seems to be in $tans, of all places."
eval $xscan;\
$contains '^fprintf$' libc.list >/dev/null 2>&1; then
eval $xrun
+elif com="$sed -n -e 's/^.*|Proc .*|Text *| *//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
elif com="$sed -n -e '/Def. Text/s/.* \([^ ]*\)\$/\1/p'";\
eval $xscan;\
$contains '^fprintf$' libc.list >/dev/null 2>&1; then
eval $xscan;\
$contains '^fprintf$' libc.list >/dev/null 2>&1; then
eval $xrun
+elif com="$sed -n -e 's/.*\.text n\ \ \ \.//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
else
nm -p $* 2>/dev/null >libc.tmp
$grep fprintf libc.tmp > libc.ptf
esac
$rm -f libnames libpath
-: Define several unixisms. Hints files or command line options
-: can be used to override them.
-case "$ar" in
-'') ar='ar';;
-esac
-case "$obj_ext" in
-'') obj_ext='.o';;
-esac
-case "$path_sep" in
-'') path_sep=':';;
-esac
-: Which makefile gets called first. This is used by make depend.
-case "$firstmakefile" in
-'') firstmakefile='makefile';;
-esac
-
: determine filename position in cpp output
echo " "
echo "Computing filename position in cpp output for #include directives..." >&4
'') case "$osname" in
hpux) dflt='+z' ;;
next) dflt='none' ;;
- solaris|svr4*|esix*) dflt='-Kpic' ;;
- irix*) dflt='-KPIC' ;;
+ svr4*|esix*) dflt='-Kpic' ;;
+ irix*) dflt='-KPIC' ;;
+ solaris) case "$ccflags" in
+ *-DDEBUGGING*) dflt='-KPIC' ;;
+ *) dflt='-Kpic' ;;
+ esac ;;
sunos) dflt='-pic' ;;
*) dflt='none' ;;
esac ;;
- *) dflt='-fpic' ;;
+ *) case "$osname/$ccflags" in
+ solaris/*-DDEBUGGING*) dflt='-fPIC' ;;
+ *) dflt='-fpic' ;;
+ esac ;;
esac ;;
*) dflt="$cccdlflags" ;;
esac
;;
*) case "$useshrplib" in
'') case "$osname" in
- svr4|dgux|dynixptx|esix|powerux)
+ svr4*|dgux|dynixptx|esix|powerux)
dflt='yes'
also='Building a shared libperl is required for dynamic loading to work on your system.'
;;
*) $cat >&4 <<EOM
WARNING: Use of the shrpdir variable for the installation location of
the shared $libperl is not supported. It was never documented and
-will not work in this version. Let me (doughera@lafcol.lafayette.edu)
-know of any problems this may cause.
+will not work in this version. Let me (chip@perl.com) know of any
+problems this may cause.
EOM
case "$shrpdir" in
solaris|netbsd)
xxx="-R $shrpdir"
;;
- linux|irix*)
+ freebsd)
+ xxx="-Wl,-R$shrpdir"
+ ;;
+ linux|irix*|dec_osf)
xxx="-Wl,-rpath,$shrpdir"
;;
*)
esac
case "$xxx" in
'') ;;
- *) ccdlflags="$ccdlflags $xxx"
- cat <<EOM >&4
+ *)
+ # Only add $xxx if it isn't already in ccdlflags.
+ case " $ccdlflags " in
+ *" $xxx "*) ;;
+ *) ccdlflags="$ccdlflags $xxx"
+ cat <<EOM >&4
Adding $xxx to the flags
passed to $ld so that the perl executable will find the
installed shared $libperl.
EOM
+ ;;
+ esac
;;
esac
fi
echo "(Attempting domain name extraction from $tans)"
: Why was there an Egrep here, when Sed works?
: Look for either a search or a domain directive.
- dflt=.`$sed -n -e 's/^search[ ]*\(.*\)/\1/p' $tans \
- | ./tr '[A-Z]' '[a-z]' 2>/dev/null`
+ dflt=.`$sed -n -e 's/ / /g' \
+ -e 's/^search *\([^ ]*\).*/\1/p' $tans \
+ | ./tr '[A-Z]' '[a-z]' 2>/dev/null`
case "$dflt" in
- .) dflt=.`$sed -n -e 's/^domain[ ]*\(.*\)/\1/p' $tans \
- | ./tr '[A-Z]' '[a-z]' 2>/dev/null`
- ;;
+ .) dflt=.`$sed -n -e 's/ / /g' \
+ -e 's/^domain *\([^ ]*\).*/\1/p' $tans \
+ | ./tr '[A-Z]' '[a-z]' 2>/dev/null`
+ ;;
esac
fi
;;
. ./myread
perladmin="$ans"
+: figure out how to guarantee perl startup
+case "$startperl" in
+'')
+ case "$sharpbang" in
+ *!)
+ $cat <<EOH
+
+I can use the #! construct to start perl on your system. This will
+make startup of perl scripts faster, but may cause problems if you
+want to share those scripts and perl is not in a standard place
+($binexp/perl) on all your platforms. The alternative is to force
+a shell by starting the script with a single ':' character.
+
+EOH
+ dflt="$binexp/perl"
+ rp='What shall I put after the #! to start up perl ("none" to not use #!)?'
+ . ./myread
+ case "$ans" in
+ none) startperl=": # use perl";;
+ *) startperl="#!$ans"
+ if $test 33 -lt `echo "$ans" | wc -c`; then
+ $cat >&4 <<EOM
+
+WARNING: Some systems limit the #! command to 32 characters.
+If you experience difficulty running Perl scripts with #!, try
+installing Perl in a directory with a shorter pathname.
+
+EOM
+ fi ;;
+ esac
+ ;;
+ *) startperl=": # use perl"
+ ;;
+ esac
+ ;;
+esac
+echo "I'll use $startperl to start perl scripts."
+
+: figure best path for perl in scripts
+case "$perlpath" in
+'')
+ perlpath="$binexp/perl"
+ case "$startperl" in
+ *!*) ;;
+ *)
+ $cat <<EOH
+
+I will use the "eval 'exec'" idiom to start Perl on your system.
+I can use the full path of your Perl binary for this purpose, but
+doing so may cause problems if you want to share those scripts and
+Perl is not always in a standard place ($binexp/perl).
+
+EOH
+ dflt="$binexp/perl"
+ rp="What path shall I use in \"eval 'exec'\"?"
+ . ./myread
+ perlpath="$ans"
+ ;;
+ esac
+ ;;
+esac
+case "$startperl" in
+*!*) ;;
+*) echo "I'll use $perlpath in \"eval 'exec'\"" ;;
+esac
+
: determine where public executable scripts go
set scriptdir scriptdir
eval $prefixit
installscript="$scriptdirexp"
fi
-: determine perl absolute location
-case "$perlpath" in
-'') perlpath=$binexp/perl ;;
-esac
-
-: figure out how to guarantee perl startup
-case "$startperl" in
-'')
- case "$sharpbang" in
- *!)
- $cat <<EOH
-
-I can use the #! construct to start perl on your system. This will
-make startup of perl scripts faster, but may cause problems if you
-want to share those scripts and perl is not in a standard place
-($perlpath) on all your platforms. The alternative is to force
-a shell by starting the script with a single ':' character.
-
-EOH
- dflt=$perlpath
- rp='What shall I put after the #! to start up perl ("none" to not use #!)?'
- . ./myread
- case "$ans" in
- none) startperl=": # use perl";;
- *) startperl="#!$ans";;
- esac
- ;;
- *) startperl=": # use perl"
- ;;
- esac
- ;;
-esac
-echo "I'll use $startperl to start perl scripts."
-
cat <<EOM
Previous version of $package used the standard IO mechanisms as defined in
set bzero d_bzero
eval $inlibc
-: check for length of integer
+: check for lengths of integral types
echo " "
case "$intsize" in
'')
echo "Checking to see how big your integers are..." >&4
- $cat >try.c <<'EOCP'
+ $cat >intsize.c <<'EOCP'
#include <stdio.h>
main()
{
- printf("%d\n", sizeof(int));
+ printf("intsize=%d;\n", sizeof(int));
+ printf("longsize=%d;\n", sizeof(long));
+ printf("shortsize=%d;\n", sizeof(short));
+ fflush(stdout);
exit(0);
}
EOCP
- if $cc $ccflags try.c -o try >/dev/null 2>&1 && ./try > /dev/null; then
- intsize=`./try`
+# If $libs contains -lsfio, and sfio is mis-configured, then it
+# sometimes (apparently) runs and exits with a 0 status, but with no
+# output!. Thus we check with test -s whether we actually got any
+# output. I think it has to do with sfio's use of _exit vs. exit,
+# but I don't know for sure. --Andy Dougherty 1/27/97.
+ if $cc $optimize $ccflags $ldflags -o intsize intsize.c $libs >/dev/null 2>&1 &&
+ ./intsize > intsize.out 2>/dev/null && test -s intsize.out ; then
+ eval `$cat intsize.out`
echo "Your integers are $intsize bytes long."
+ echo "Your long integers are $longsize bytes long."
+ echo "Your short integers are $shortsize bytes long."
else
- dflt='4'
- echo "(I can't seem to compile the test program. Guessing...)"
+ $cat >&4 <<EOM
+
+Help! I can't compile and run the intsize test program: please enlighten me!
+(This is probably a misconfiguration in your system or libraries, and
+you really ought to fix it. Still, I'll try anyway.)
+
+EOM
+ dflt=4
rp="What is the size of an integer (in bytes)?"
. ./myread
intsize="$ans"
+ dflt=$intsize
+ rp="What is the size of a long integer (in bytes)?"
+ . ./myread
+ longsize="$ans"
+ dflt=2
+ rp="What is the size of a short integer (in bytes)?"
+ . ./myread
+ shortsize="$ans"
fi
;;
esac
-$rm -f try.c try
+$rm -f intsize intsize.[co] intsize.out
: see if signal is declared as pointer to function returning int or void
echo " "
val="$define"
cryptlib=''
else
- cryptlib=`./loc Slibcrypt${lib_ext} "" $xlibpth`
+ cryptlib=`./loc Slibcrypt$lib_ext "" $xlibpth`
if $test -z "$cryptlib"; then
- cryptlib=`./loc Mlibcrypt${lib_ext} "" $xlibpth`
+ cryptlib=`./loc Mlibcrypt$lib_ext "" $xlibpth`
else
cryptlib=-lcrypt
fi
if $test -z "$cryptlib"; then
- cryptlib=`./loc Llibcrypt${lib_ext} "" $xlibpth`
+ cryptlib=`./loc Llibcrypt$lib_ext "" $xlibpth`
else
cryptlib=-lcrypt
fi
if $test -z "$cryptlib"; then
- cryptlib=`./loc libcrypt${lib_ext} "" $libpth`
+ cryptlib=`./loc libcrypt$lib_ext "" $libpth`
else
cryptlib=-lcrypt
fi
: get csh whereabouts
case "$csh" in
-'csh') val="$undef" ;;
-*) val="$define" ;;
+'csh') val="$undef" ;;
+*) val="$define" ;;
esac
set d_csh
eval $setvar
-full_csh=$csh
+: Respect a hint or command line value for full_csh.
+case "$full_csh" in
+'') full_csh=$csh ;;
+esac
: see if cuserid exists
set cuserid d_cuserid
#endif
handle = dlopen("./dyna.$dlext", mode) ;
if (handle == NULL) {
- printf ("1\n") ;
- exit(0);
+ printf ("1\n") ;
+ fflush (stdout) ;
+ exit(0);
}
symbol = dlsym(handle, "fred") ;
if (symbol == NULL) {
- /* try putting a leading underscore */
- symbol = dlsym(handle, "_fred") ;
- if (symbol == NULL) {
- printf ("2\n") ;
- exit(0);
- }
- printf ("3\n") ;
+ /* try putting a leading underscore */
+ symbol = dlsym(handle, "_fred") ;
+ if (symbol == NULL) {
+ printf ("2\n") ;
+ fflush (stdout) ;
+ exit(0);
+ }
+ printf ("3\n") ;
}
else
- printf ("4\n") ;
- exit(0);
+ printf ("4\n") ;
+ fflush (stdout) ;
+ exit(0);
}
EOM
: Call the object file tmp-dyna.o in case dlext=o.
*) echo "However, your read() returns '$status' on EOF??";;
esac
val="$define"
- if test "$status" -eq "$rd_nodata"; then
+ if test "$status" = "$rd_nodata"; then
echo "WARNING: you can't distinguish between EOF and no data!"
val="$undef"
fi
set getpriority d_getprior
eval $inlibc
+: see if gettimeofday or ftime exists
+set gettimeofday d_gettimeod
+eval $inlibc
+case "$d_gettimeod" in
+"$undef")
+ set ftime d_ftime
+ eval $inlibc
+ ;;
+*)
+ val="$undef"; set d_ftime; eval $setvar
+ ;;
+esac
+case "$d_gettimeod$d_ftime" in
+"$undef$undef")
+ echo " "
+ echo 'No ftime() nor gettimeofday() -- timing may be less accurate.' >&4
+ ;;
+esac
+
: see if this is a netinet/in.h or sys/in.h system
set netinet/in.h i_niin sys/in.h i_sysin
eval $inhdr
val="$vali"
set d_index; eval $setvar
+: check whether inet_aton exists
+set inet_aton d_inetaton
+eval $inlibc
+
: Look for isascii
echo " "
$cat >isascii.c <<'EOCP'
exit(0);
}
EOCP
- if $cc $ccflags $ldflags foo.c -o safebcpy $libs >/dev/null 2>&1; then
+ if $cc $optimize $ccflags $ldflags foo.c \
+ -o safebcpy $libs >/dev/null 2>&1; then
if ./safebcpy 2>/dev/null; then
echo "Yes, it can."
val="$define"
exit(0);
}
EOCP
- if $cc $ccflags $ldflags foo.c -o safemcpy $libs >/dev/null 2>&1; then
+ if $cc $optimize $ccflags $ldflags foo.c \
+ -o safemcpy $libs >/dev/null 2>&1; then
if ./safemcpy 2>/dev/null; then
echo "Yes, it can."
val="$define"
set d_safemcpy
eval $setvar
+: can memcmp be trusted to compare relative magnitude?
+val="$undef"
+case "$d_memcmp" in
+"$define")
+ echo " "
+ echo "Checking to see if your memcmp() can compare relative magnitude..." >&4
+ $cat >foo.c <<EOCP
+#$i_memory I_MEMORY
+#$i_stdlib I_STDLIB
+#$i_string I_STRING
+#$i_unistd I_UNISTD
+EOCP
+ $cat >>foo.c <<'EOCP'
+#include <stdio.h>
+
+#ifdef I_MEMORY
+# include <memory.h>
+#endif
+#ifdef I_STDLIB
+# include <stdlib.h>
+#endif
+#ifdef I_STRING
+# include <string.h>
+#else
+# include <strings.h>
+#endif
+#ifdef I_UNISTD
+# include <unistd.h> /* Needed for NetBSD */
+#endif
+main()
+{
+char a = -1;
+char b = 0;
+if ((a < b) && memcmp(&a, &b, 1) < 0)
+ exit(1);
+exit(0);
+}
+EOCP
+ if $cc $optimize $ccflags $ldflags foo.c \
+ -o sanemcmp $libs >/dev/null 2>&1; then
+ if ./sanemcmp 2>/dev/null; then
+ echo "Yes, it can."
+ val="$define"
+ else
+ echo "No, it can't (it uses signed chars)."
+ fi
+ else
+ echo "(I can't compile the test program, so we'll assume not...)"
+ fi
+ ;;
+esac
+$rm -f foo.* sanemcmp core
+set d_sanemcmp
+eval $setvar
+
: see if select exists
set select d_select
eval $inlibc
y|Y) ;;
*) echo "Ok, avoiding sfio this time. I'll use stdio instead."
val="$undef"
+ : Remove sfio from list of libraries to use
+ set `echo X $libs | $sed -e 's/-lsfio / /' -e 's/-lsfio$//'`
+ shift
+ libs="$*"
+ echo "libs = $libs" >&4
;;
esac
;;
: we will have to assume that it supports the 4.2 BSD interface
d_oldsock="$undef"
else
- echo "You don't have Berkeley networking in libc${lib_ext}..." >&4
- if test -f /usr/lib/libnet${lib_ext}; then
- ( (nm $nm_opt /usr/lib/libnet${lib_ext} | eval $nm_extract) || \
- ar t /usr/lib/libnet${lib_ext}) 2>/dev/null >> libc.list
+ echo "You don't have Berkeley networking in libc$lib_ext..." >&4
+ if test -f /usr/lib/libnet$lib_ext; then
+ ( (nm $nm_opt /usr/lib/libnet$lib_ext | eval $nm_extract) || \
+ ar t /usr/lib/libnet$lib_ext) 2>/dev/null >> libc.list
if $contains socket libc.list >/dev/null 2>&1; then
echo "...but the Wollongong group seems to have hacked it in." >&4
socketlib="-lnet"
d_oldsock="$define"
fi
else
- echo "or even in libnet${lib_ext}, which is peculiar." >&4
+ echo "or even in libnet$lib_ext, which is peculiar." >&4
d_socket="$undef"
d_oldsock="$undef"
fi
set d_stdio_cnt_lval
eval $setvar
-: How to access the stdio _filbuf or __filbuf function.
-: If this fails, check how the getc macro in stdio.h works.
-case "${d_stdio_ptr_lval}${d_stdio_cnt_lval}" in
-${define}${define})
- : Try $hint value, if any, then _filbuf, __filbuf, _fill, then punt.
- : _fill is for os/2.
- xxx='notok'
- for filbuf in $stdio_filbuf '_filbuf(fp)' '__filbuf(fp) ' '_fill(fp)' ; do
- $cat >try.c <<EOP
-#include <stdio.h>
-#define FILE_ptr(fp) $stdio_ptr
-#define FILE_cnt(fp) $stdio_cnt
-#define FILE_filbuf(fp) $filbuf
-main() {
- FILE *fp = fopen("try.c", "r");
- int c;
- c = getc(fp);
- c = FILE_filbuf(fp); /* Just looking for linker errors.*/
- exit(0);
-}
-EOP
- if $cc $ccflags $ldflags -o try try.c $libs >/dev/null 2>&1 && ./try; then
- echo "Your stdio appears to use $filbuf"
- stdio_filbuf="$filbuf"
- xxx='ok'
- break
- else
- echo "Hmm. $filbuf doesn't seem to work."
- fi
- $rm -f try.c try
- done
- case "$xxx" in
- notok) echo "I can't figure out how to access _filbuf"
- echo "I'll just have to work around it."
- d_stdio_ptr_lval="$undef"
- d_stdio_cnt_lval="$undef"
- ;;
- esac
- ;;
-esac
-
: see if _base is also standard
val="$undef"
dflt=`./try`
else
dflt='8'
- echo"(I can't seem to compile the test program...)"
+ echo "(I can't seem to compile the test program...)"
fi
;;
*) dflt="$alignbytes"
eval $inhdr
case "$i_db" in
+$define)
+ : Check db version. We can not use version 2.
+ echo " "
+ echo "Checking Berkeley DB version ..." >&4
+ $cat >try.c <<EOCP
+#$d_const HASCONST
+#ifndef HASCONST
+#define const
+#endif
+#include <sys/types.h>
+#include <stdio.h>
+#include <db.h>
+main()
+{
+#ifdef DB_VERSION_MAJOR /* DB version >= 2: not yet. */
+ printf("You have Berkeley DB Version %d.%d\n",
+ DB_VERSION_MAJOR, DB_VERSION_MINOR);
+ printf("Perl currently only supports up to version 1.86.\n");
+ exit(2);
+#else
+#if defined(_DB_H_) && defined(BTREEMAGIC) && defined(HASHMAGIC)
+ exit(0); /* DB version < 2: the coast is clear. */
+#else
+ exit(1); /* <db.h> not Berkeley DB? */
+#endif
+#endif
+}
+EOCP
+ if $cc $optimize $ccflags $ldflags -o try try.c $libs && ./try; then
+ echo 'Looks OK. (Perl supports up to version 1.86).' >&4
+ else
+ echo "I can't use your Berkeley DB. I'll disable it." >&4
+ i_db=$undef
+ case " $libs " in
+ *"-ldb "*)
+ : Remove db from list of libraries to use
+ echo "Removing unusable -ldb from library list" >&4
+ set `echo X $libs | $sed -e 's/-ldb / /' -e 's/-ldb$//'`
+ shift
+ libs="$*"
+ echo "libs = $libs" >&4
+ ;;
+ esac
+ fi
+ $rm -f try.*
+ ;;
+esac
+
+case "$i_db" in
define)
: Check the return type needed for hash
echo " "
db_hashtype='u_int32_t'
fi
else
- echo "I can't seem to compile the test program." >&4
- db_hashtype=int
+ : XXX Maybe we should just give up here.
+ db_hashtype=u_int32_t
+ echo "Help: I can't seem to compile the db test program." >&4
+ echo "Something's wrong, but I'll assume you use $db_hashtype." >&4
fi
$rm -f try.*
echo "Your version of Berkeley DB uses $db_hashtype for hash."
;;
-*) db_hashtype=int
+*) db_hashtype=u_int32_t
;;
esac
db_prefixtype='size_t'
fi
else
- echo "I can't seem to compile the test program." >&4
- db_prefixtype='int'
+ db_prefixtype='size_t'
+ : XXX Maybe we should just give up here.
+ echo "Help: I can't seem to compile the db test program." >&4
+ echo "Something's wrong, but I'll assume you use $db_prefixtype." >&4
fi
$rm -f try.*
echo "Your version of Berkeley DB uses $db_prefixtype for prefix."
;;
-*) db_prefixtype='int'
+*) db_prefixtype='size_t'
;;
esac
set getgroups d_getgrps
eval $inlibc
-: Find type of 2nd arg to getgroups
+: see if setgroups exists
+set setgroups d_setgrps
+eval $inlibc
+
+: Find type of 2nd arg to 'getgroups()' and 'setgroups()'
echo " "
-case "$d_getgrps" in
-'define')
+case "$d_getgrps$d_setgrps" in
+*define*)
case "$groupstype" in
'') dflt="$gidtype" ;;
*) dflt="$groupstype" ;;
esac
$cat <<EOM
-What is the type of the second argument to getgroups()? Usually this
-is the same as group ids, $gidtype, but not always.
+What is the type of the second argument to getgroups() and setgroups()?
+Usually this is the same as group ids, $gidtype, but not always.
EOM
- rp='What type is the second argument to getgroups()?'
+ rp='What type is the second argument to getgroups() and setgroups()?'
. ./myread
groupstype="$ans"
;;
for (i = 0; max; i++)
max /= 2;
printf("%d\n",i);
+ fflush(stdout);
}
EOCP
- if $cc try.c -o try >/dev/null 2>&1 ; then
+ if $cc $ccflags $ldflags -o try try.c $libs >/dev/null 2>&1 ; then
dflt=`try`
else
dflt='?'
rp='How many bits does your rand() function produce?'
. ./myread
randbits="$ans"
-$rm -f try.c try
+$rm -f try.c try.o try
: see if ar generates random libraries by itself
echo " "
$cc $ccflags -c bar1.c >/dev/null 2>&1
$cc $ccflags -c bar2.c >/dev/null 2>&1
$cc $ccflags -c foo.c >/dev/null 2>&1
-ar rc bar${lib_ext} bar2.o bar1.o >/dev/null 2>&1
-if $cc $ccflags $ldflags -o foobar foo.o bar${lib_ext} $libs > /dev/null 2>&1 &&
+ar rc bar$lib_ext bar2.o bar1.o >/dev/null 2>&1
+if $cc $ccflags $ldflags -o foobar foo.o bar$lib_ext $libs > /dev/null 2>&1 &&
./foobar >/dev/null 2>&1; then
echo "ar appears to generate random libraries itself."
orderlib=false
ranlib=":"
-elif ar ts bar${lib_ext} >/dev/null 2>&1 &&
- $cc $ccflags $ldflags -o foobar foo.o bar${lib_ext} $libs > /dev/null 2>&1 &&
+elif ar ts bar$lib_ext >/dev/null 2>&1 &&
+ $cc $ccflags $ldflags -o foobar foo.o bar$lib_ext $libs > /dev/null 2>&1 &&
./foobar >/dev/null 2>&1; then
echo "a table of contents needs to be added with 'ar ts'."
orderlib=false
printf("int\n");
else
printf("long\n");
+ fflush(stdout);
exit(0);
}
EOM
echo " "
-if $cc $ccflags $ldflags -o ssize ssize.c $libs > /dev/null 2>&1 &&
- ./ssize > /dev/null 2>&1 ; then
- ssizetype=`./ssize`
+# If $libs contains -lsfio, and sfio is mis-configured, then it
+# sometimes (apparently) runs and exits with a 0 status, but with no
+# output!. Thus we check with test -s whether we actually got any
+# output. I think it has to do with sfio's use of _exit vs. exit,
+# but I don't know for sure. --Andy Dougherty 1/27/97.
+if $cc $optimize $ccflags $ldflags -o ssize ssize.c $libs > /dev/null 2>&1 &&
+ ./ssize > ssize.out 2>/dev/null && test -s ssize.out ; then
+ ssizetype=`$cat ssize.out`
echo "I'll be using $ssizetype for functions returning a byte count." >&4
else
- echo "(I can't compile and run the test program--please enlighten me!)"
- $cat <<EOM
+ $cat >&4 <<EOM
+
+Help! I can't compile and run the ssize_t test program: please enlighten me!
+(This is probably a misconfiguration in your system or libraries, and
+you really ought to fix it. Still, I'll try anyway.)
I need a type that is the same size as $sizetype, but is guaranteed to
-be signed. Common values are int and long.
+be signed. Common values are ssize_t, int and long.
EOM
rp="What signed type is the same size as $sizetype?"
. ./myread
ssizetype="$ans"
fi
-$rm -f ssize ssize.[co]
+$rm -f ssize ssize.[co] ssize.out
: see what type of char stdio uses.
echo " "
: some additional extensions into the source tree and expect them
: to be built.
for xxx in * ; do
- case "$xxx" in
- DynaLoader) ;;
- *)
- if $test -f $xxx/$xxx.xs; then
- known_extensions="$known_extensions $xxx"
- else
- if $test -d $xxx; then
- cd $xxx
- for yyy in * ; do
- if $test -f $yyy/$yyy.xs; then
- known_extensions="$known_extensions $xxx/$yyy"
- fi
- done
- cd ..
- fi
- fi ;;
- esac
+ case "$xxx" in
+ DynaLoader) ;;
+ *) if $test -f $xxx/$xxx.xs; then
+ known_extensions="$known_extensions $xxx"
+ else
+ if $test -d $xxx; then
+ cd $xxx
+ for yyy in * ; do
+ if $test -f $yyy/$yyy.xs; then
+ known_extensions="$known_extensions $xxx/$yyy"
+ fi
+ done
+ cd ..
+ fi
+ fi ;;
+ esac
done
set X $known_extensions
shift
$spitshell <<EOT >config.sh
$startsh
#
-# This file was produced by running the Configure script. It holds all the
-# definitions figured out by Configure. Should you modify one of these values,
-# do not forget to propagate your changes by running "Configure -der". You may
-# instead choose to run each of the .SH files by yourself, or "Configure -S".
+# This file was produced by running the Configure script. It holds all
+# the definitions figured out by Configure. Should you modify any of
+# these values, do not forget to propagate your changes by running
+# "Configure -S"; or, equivalently, you may run each .SH file yourself.
#
# Configuration time: $cf_time
baserev='$baserev'
bash='$bash'
bin='$bin'
+bincompat3='$bincompat3'
binexp='$binexp'
bison='$bison'
byacc='$byacc'
d_attribut='$d_attribut'
d_bcmp='$d_bcmp'
d_bcopy='$d_bcopy'
+d_bincompat3='$d_bincompat3'
d_bsd='$d_bsd'
d_bsdgetpgrp='$d_bsdgetpgrp'
d_bsdpgrp='$d_bsdpgrp'
d_fork='$d_fork'
d_fpathconf='$d_fpathconf'
d_fsetpos='$d_fsetpos'
+d_ftime='$d_ftime'
d_getgrps='$d_getgrps'
+d_setgrps='$d_setgrps'
d_gethent='$d_gethent'
d_gethname='$d_gethname'
d_getlogin='$d_getlogin'
d_getpgrp='$d_getpgrp'
d_getppid='$d_getppid'
d_getprior='$d_getprior'
+d_gettimeod='$d_gettimeod'
d_gnulibc='$d_gnulibc'
d_htonl='$d_htonl'
d_index='$d_index'
+d_inetaton='$d_inetaton'
d_isascii='$d_isascii'
d_killpg='$d_killpg'
d_link='$d_link'
d_rmdir='$d_rmdir'
d_safebcpy='$d_safebcpy'
d_safemcpy='$d_safemcpy'
+d_sanemcmp='$d_sanemcmp'
d_seekdir='$d_seekdir'
d_select='$d_select'
d_sem='$d_sem'
lns='$lns'
locincpth='$locincpth'
loclibpth='$loclibpth'
+longsize='$longsize'
lp='$lp'
lpr='$lpr'
ls='$ls'
shar='$shar'
sharpbang='$sharpbang'
shmattype='$shmattype'
+shortsize='$shortsize'
shrpenv='$shrpenv'
shsharp='$shsharp'
sig_name='$sig_name'
stdio_base='$stdio_base'
stdio_bufsiz='$stdio_bufsiz'
stdio_cnt='$stdio_cnt'
-stdio_filbuf='$stdio_filbuf'
stdio_ptr='$stdio_ptr'
strings='$strings'
submit='$submit'
https://perl5.git.perl.org / perl5.git / blobdiff