# archive site. Check with Archie if you don't know where that can be.)
#
-# $Id: Head.U,v 3.0.1.6 1994/10/29 15:54:19 ram Exp $
+# $Id: Head.U,v 3.0.1.8 1995/07/25 13:40:02 ram Exp $
#
-# Generated on Fri Mar 10 09:48:55 EST 1995 [metaconfig 3.0 PL51]
+# Generated on Wed Feb 21 14:26:18 EST 1996 [metaconfig 3.0 PL60]
cat >/tmp/c1$$ <<EOF
ARGGGHHHH!!!!!
;;
esac
+: Proper PATH separator
+p_=:
+: On OS/2 this directory should exist if this is not floppy only system :-]
+if test -d c:/.; then
+ p_=\;
+ PATH=`cmd /c "echo %PATH%" | tr '\\\\' / `
+ OS2_SHELL=`cmd /c "echo %OS2_SHELL%" | tr '\\\\' / | tr '[A-Z]' '[a-z]'`
+fi
: Proper PATH setting
paths='/bin /usr/bin /usr/local/bin /usr/ucb /usr/local /usr/lbin'
-paths=$paths:'/usr/5bin /etc /usr/gnu/bin /usr/new /usr/new/bin /usr/nbin'
-paths=$paths:'/sys5.3/bin /sys5.3/usr/bin /bsd4.3/bin /bsd4.3/usr/ucb'
-paths=$paths:'/bsd4.3/usr/bin /usr/bsd /bsd43/bin /usr/ccs/bin'
-paths=$paths:'/etc /usr/lib /usr/ucblib /lib /usr/ccs/lib'
-paths=$paths:'/sbin /usr/sbin /usr/libexec'
+paths="$paths /opt/bin /opt/local/bin /opt/local /opt/lbin"
+paths="$paths /usr/5bin /etc /usr/gnu/bin /usr/new /usr/new/bin /usr/nbin"
+paths="$paths /opt/gnu/bin /opt/new /opt/new/bin /opt/nbin"
+paths="$paths /sys5.3/bin /sys5.3/usr/bin /bsd4.3/bin /bsd4.3/usr/ucb"
+paths="$paths /bsd4.3/usr/bin /usr/bsd /bsd43/bin /usr/ccs/bin"
+paths="$paths /etc /usr/lib /usr/ucblib /lib /usr/ccs/lib"
+paths="$paths /sbin /usr/sbin /usr/libexec"
for p in $paths
do
- case ":$PATH:" in
- *:$p:*) ;;
- *) test -d $p && PATH=$PATH:$p ;;
+ case "$p_$PATH$p_" in
+ *$p_$p$p_*) ;;
+ *) test -d $p && PATH=$PATH$p_$p ;;
esac
done
-PATH=.:$PATH
+PATH=.$p_$PATH
export PATH
: Sanity checks
: Configure runs within the UU subdirectory
test -d UU || mkdir UU
-cd UU && rm -f *
+cd UU && rm -f ./*
dynamic_ext=''
extensions=''
known_extensions=''
static_ext=''
useposix=''
+usesafe=''
d_bsd=''
d_eunice=''
d_xenix=''
Revision=''
Source=''
State=''
+ar=''
+archobjs=''
+exe_ext=''
+firstmakefile=''
+lib_ext=''
+obj_ext=''
+path_sep=''
afs=''
alignbytes=''
archlib=''
cppflags=''
ldflags=''
lkflags=''
+locincpth=''
optimize=''
+cf_email=''
cf_by=''
cf_time=''
contains=''
d_attribut=''
d_bcmp=''
d_bcopy=''
-d_byacc=''
d_bzero=''
d_casti32=''
castflags=''
d_dlsymun=''
d_dosuid=''
d_suidsafe=''
-d_drem=''
d_dup2=''
d_fchmod=''
d_fchown=''
d_fgetpos=''
d_flexfnam=''
d_flock=''
-d_fmod=''
d_fork=''
d_fsetpos=''
d_Gconvert=''
d_isascii=''
d_killpg=''
d_link=''
-d_linuxstd=''
d_locconv=''
d_lockf=''
d_lstat=''
d_pathconf=''
d_pause=''
d_pipe=''
+d_poll=''
d_portable=''
d_readdir=''
d_rewinddir=''
d_shmctl=''
d_shmdt=''
d_shmget=''
+d_sigsetjmp=''
+d_sigaction=''
+d_sigintrp=''
+d_sigvec=''
+d_sigvectr=''
d_oldsock=''
d_socket=''
d_sockpair=''
sockethdr=''
socketlib=''
d_statblks=''
+d_stdio_cnt_lval=''
+d_stdio_ptr_lval=''
+d_stdiobase=''
d_stdstdio=''
+stdio_base=''
+stdio_bufsiz=''
+stdio_cnt=''
+stdio_ptr=''
d_index=''
d_strchr=''
d_strcoll=''
ccdlflags=''
d_shrplib=''
dlsrc=''
+ld=''
lddlflags=''
shrpdir=''
usedl=''
db_prefixtype=''
i_db=''
i_dbm=''
+i_rpcsvcdbm=''
d_dirnamlen=''
direntrytype=''
i_dirent=''
i_gdbm=''
i_grp=''
i_limits=''
+i_locale=''
i_malloc=''
i_math=''
i_memory=''
i_sysstat=''
i_systimes=''
i_systypes=''
+i_sysun=''
i_sgtty=''
i_termio=''
i_termios=''
libc=''
glibpth=''
libpth=''
+loclibpth=''
plibpth=''
xlibpth=''
libs=''
mallocsrc=''
malloctype=''
usemymalloc=''
-installmansrc=''
-manext=''
-mansrc=''
-mansrcexp=''
+installman1dir=''
+man1dir=''
+man1direxp=''
+man1ext=''
+installman3dir=''
+man3dir=''
+man3direxp=''
+man3ext=''
huge=''
large=''
medium=''
phostname=''
c=''
n=''
+d_eofnblk=''
+eagain=''
+o_nonblock=''
+rd_nodata=''
groupcat=''
hostcat=''
passcat=''
+d_oldarchlib=''
+oldarchlib=''
+oldarchlibexp=''
orderlib=''
ranlib=''
package=''
spackage=''
+pager=''
patchlevel=''
+perladmin=''
+perlpath=''
prefix=''
prefixexp=''
installprivlib=''
scriptdirexp=''
selecttype=''
sig_name=''
+sig_num=''
+installsitearch=''
+sitearch=''
+sitearchexp=''
+installsitelib=''
+sitelib=''
+sitelibexp=''
sizetype=''
so=''
sharpbang=''
shsharp=''
spitshell=''
ssizetype=''
+startperl=''
startsh=''
stdchar=''
+subversion=''
sysman=''
uidtype=''
nm_opt=''
+nm_so_opt=''
runnm=''
usenm=''
incpath=''
al="$al u3b20d u3b5 ultrix unix unixpc unos vax venix vms"
al="$al xenix z8000"
-gccversion=''
groupstype=''
i_whoami=''
+: default library list
+libswanted=''
+: set useposix=false in your hint file to disable the POSIX extension.
+useposix=true
+: set usesafe=false in your hint if you want to skip the Safe extension.
+usesafe=true
+: Define several unixisms. These can be used in hint files.
+exe_ext=''
+: Extra object files, if any, needed on this platform.
+archobjs=''
+: Possible local include directories to search.
+: Set locincpth to "" in a hint file to defeat local include searches.
+locincpth="/usr/local/include /opt/local/include /usr/gnu/include"
+locincpth="$locincpth /opt/gnu/include /usr/GNU/include /opt/GNU/include"
+:
+: no include file wanted by default
+inclwanted=''
+
: change the next line if compiling for Xenix/286 on Xenix/386
xlibpth='/usr/lib/386 /lib/386'
+: Possible local library directories to search.
+loclibpth="/usr/local/lib /opt/local/lib /usr/gnu/lib"
+loclibpth="$loclibpth /opt/gnu/lib /usr/GNU/lib /opt/GNU/lib"
+
: general looking path for locating libraries
-glibpth="/lib/pa1.1 /usr/lib/large /lib /usr/lib $xlibpth"
-glibpth="$glibpth /lib/large /usr/lib/small /lib/small"
-glibpth="$glibpth /usr/ccs/lib /usr/ucblib /usr/local/lib /usr/shlib"
+glibpth="/lib/pa1.1 /usr/shlib /usr/lib/large /lib /usr/lib"
+glibpth="$glibpth $xlibpth /lib/large /usr/lib/small /lib/small"
+glibpth="$glibpth /usr/ccs/lib /usr/ucblib /usr/shlib"
: Private path used by Configure to find libraries. Its value
: is prepended to libpth. This variable takes care of special
: machines, like the mips. Usually, it should be empty.
plibpth=''
-: default library list
-libswanted=''
: full support for void wanted by default
defvoidused=15
-: set useposix=false in your hint file to disable the POSIX extension.
-useposix=true
-: no include file wanted by default
-inclwanted=''
-
: List of libraries we want.
libswanted='net socket inet nsl nm ndbm gdbm dbm db malloc dl'
libswanted="$libswanted dld ld sun m c cposix posix ndir dir crypt"
glibpth="/usr/shlib $glibpth"
: Do not use vfork unless overridden by a hint file.
usevfork=false
-: We might as well always be portable. It makes no difference for
-: perl5, and makes people happy.
-d_portable=define
: script used to extract .SH files with variable substitutions
cat >extract <<'EOS'
: produce awk script to parse command line options
cat >options.awk <<'EOF'
BEGIN {
- optstr = "dD:eEf:hOrsSU:V"; # getopt-style specification
+ optstr = "dD:eEf:hKOrsSU:V"; # getopt-style specification
len = length(optstr);
for (i = 1; i <= len; i++) {
EOF
: process the command line options
-set X `for arg in "$@"; do echo $arg; done | awk -f options.awk`
+set X `for arg in "$@"; do echo "X$arg"; done |
+ sed -e s/X// | awk -f options.awk`
eval "set $*"
shift
rm -f options.awk
silent=''
extractsh=''
override=''
+knowitall=''
rm -f optdef.sh
: option parsing
-r) shift; reuseval=true;;
-s) shift; silent=true;;
-E) shift; alldone=exit;;
+ -K) shift; knowitall=true;;
-O) shift; override=true;;
-S) shift; extractsh=true;;
-D)
esac
shift
;;
- -V) echo "$me generated by metaconfig 3.0 PL51." >&2
+ -V) echo "$me generated by metaconfig 3.0 PL60." >&2
exit 0;;
--) break;;
-*) echo "$me: unknown option $1" >&2; shift; error=true;;
case "$error" in
true)
cat >&2 <<EOM
-Usage: $me [-dehrEOSV] [-f config.sh] [-D symbol] [-D symbol=value]
+Usage: $me [-dehrEKOSV] [-f config.sh] [-D symbol] [-D symbol=value]
[-U symbol] [-U symbol=]
-d : use defaults for all answers.
-e : go on without questioning past the production of config.sh.
-D symbol symbol gets the value 'define'
-D symbol=value symbol gets the value 'value'
-E : stop at the end of questions, after having produced config.sh.
+ -K : do not use unless you know what you are doing.
-O : let -D and -U override definitions from loaded configuration file.
-S : perform variable substitutions on all .SH files (can mix with -f)
-U : undefine symbol:
You have the option of continuing the configuration process, despite the
distinct possibility that your kit is damaged, by typing 'y'es. If you
do, don't blame me if something goes wrong. I advise you to type 'n'o
-and contact the author (lwall@netlabs.com).
+and contact the author (doughera@lafcol.lafayette.edu).
EOM
echo $n "Continue? [n] $c" >&4
case "\$1" in
-d)
fastread=yes
- echo "(OK, I'll run with -d after this question.)"
+ echo "(OK, I'll run with -d after this question.)" >&4
;;
-*)
- echo "*** Sorry, \$1 not supported yet."
+ echo "*** Sorry, \$1 not supported yet." >&4
;;
esac
$myecho
Unix system. If despite that it blows up on yours, your best bet is to edit
Configure and run it again. If you can't run Configure for some reason,
you'll have to generate a config.sh file by hand. Whatever problems you
-have, let me (lwall@netlabs.com) know how I blew it.
+have, let me (doughera@lafcol.lafayette.edu) know how I blew it.
This installation script affects things in two ways:
csh
date
egrep
+less
line
+more
nroff
perl
+pg
+sendmail
test
uname
"
-pth=`echo $PATH | sed -e 's/:/ /g'`
+pth=`echo $PATH | sed -e "s/$p_/ /g"`
pth="$pth /lib /usr/lib"
for file in $loclist; do
xxx=`./loc $file $file $pth`
/*)
echo $file is in $xxx.
;;
+ ?:[\\/]*)
+ echo $file is in $xxx.
+ ;;
*)
- echo "I don't know where $file is. I hope it's in everyone's PATH."
+ echo "I don't know where '$file' is, and my life depends on it." >&4
+ echo "Go find a public domain implementation or fix your PATH setting!" >&4
+ exit 1
;;
esac
done
/*)
echo $file is in $xxx.
;;
+ ?:[\\/]*)
+ echo $file is in $xxx.
+ ;;
*)
echo "I don't see $file out there, $say."
say=either
./tr '[A-Z]' '[a-z]' | tr '\012' ' '`
newmyuname="$myuname"
dflt=n
-if test "$fastread" = yes; then
- dflt=y
-elif test -f ../config.sh; then
- if $contains myuname= ../config.sh >/dev/null 2>&1; then
- eval "`grep myuname= ../config.sh`"
- fi
- if test "X$myuname" = "X$newmyuname"; then
- dflt=y
+case "$knowitall" in
+'')
+ if test -f ../config.sh; then
+ if $contains myuname= ../config.sh >/dev/null 2>&1; then
+ eval "`grep myuname= ../config.sh`"
+ fi
+ if test "X$myuname" = "X$newmyuname"; then
+ dflt=y
+ fi
fi
-fi
+ ;;
+*) dflt=y;;
+esac
: Get old answers from old config file if Configure was run on the
: same system, otherwise use the hints.
cd hints; ls -C *.sh | $sed 's/\.sh/ /g' >&4
dflt=''
: Half the following guesses are probably wrong... If you have better
- : tests or hints, please send them to lwall@netlabs.com
+ : tests or hints, please send them to doughera@lafcol.lafayette.edu
: The metaconfig authors would also appreciate a copy...
$test -f /irix && osname=irix
$test -f /xenix && osname=sco_xenix
$test -d /usr/apollo/bin && osname=apollo
$test -f /etc/saf/_sactab && osname=svr4
$test -d /usr/include/minix && osname=minix
- $test -d /MachTen && osname=machten && \
- osvers=`/usr/etc/version | $awk '{print $2}' | \
- $sed -e 's/[A-Za-z]$//'`
+ if $test -d /MachTen; then
+ osname=machten
+ if $test -x /sbin/version; then
+ osvers=`/sbin/version | $awk '{print $2}' |
+ $sed -e 's/[A-Za-z]$//'`
+ elif $test -x /usr/etc/version; then
+ osvers=`/usr/etc/version | $awk '{print $2}' |
+ $sed -e 's/[A-Za-z]$//'`
+ else
+ osvers="$2.$3"
+ fi
+ fi
if $test -f $uname; then
set X $myuname
shift
osname=news_os
fi
$rm -f ../UU/kernel.what
+ elif test -d c:/.; then
+ set X $myuname
+ osname=os2
+ osvers="$5"
fi
fi
cf_by=`$cat .temp`
$rm -f .temp
-: determine where manual pages are on this system
+: determine the architecture name
echo " "
-case "$sysman" in
-'')
- syspath='/usr/man/man1 /usr/man/mann /usr/man/manl /usr/man/local/man1'
- syspath="$syspath /usr/man/u_man/man1 /usr/share/man/man1"
- syspath="$syspath /usr/catman/u_man/man1 /usr/man/l_man/man1"
- syspath="$syspath /usr/local/man/u_man/man1 /usr/local/man/l_man/man1"
- syspath="$syspath /usr/man/man.L /local/man/man1 /usr/local/man/man1"
- sysman=`./loc . /usr/man/man1 $syspath`
+if xxx=`./loc arch blurfl $pth`; $test -f "$xxx"; then
+ tarch=`arch`"-$osname"
+elif xxx=`./loc uname blurfl $pth`; $test -f "$xxx" ; then
+ if uname -m > tmparch 2>&1 ; then
+ tarch=`$sed -e 's/ /_/g' -e 's/$/'"-$osname/" tmparch`
+ else
+ tarch="$osname"
+ fi
+ $rm -f tmparch
+else
+ tarch="$osname"
+fi
+case "$myarchname" in
+''|"$tarch") ;;
+*)
+ echo "(Your architecture name used to be $myarchname.)"
+ archname=''
;;
esac
-if $test -d "$sysman"; then
- echo "System manual is in $sysman." >&4
+case "$archname" in
+'') dflt="$tarch";;
+*) dflt="$archname";;
+esac
+rp='What is your architecture name'
+. ./myread
+archname="$ans"
+myarchname="$tarch"
+
+: is AFS running?
+echo " "
+if test -d /afs; then
+ echo "AFS may be running... I'll be extra cautious then..." >&4
+ afs=true
else
- echo "Could not find manual pages in source form." >&4
+ echo "AFS does not seem to be running..." >&4
+ afs=false
fi
-: see what memory models we can support
-case "$models" in
-'')
- $cat >pdp11.c <<'EOP'
-main() {
-#ifdef pdp11
- exit(0);
-#else
- exit(1);
-#endif
-}
-EOP
- cc -o pdp11 pdp11.c >/dev/null 2>&1
- if ./pdp11 2>/dev/null; then
- dflt='unsplit split'
- else
- tans=`./loc . X /lib/small /lib/large /usr/lib/small /usr/lib/large /lib/medium /usr/lib/medium /lib/huge`
- case "$tans" in
- X) dflt='none';;
- *) if $test -d /lib/small || $test -d /usr/lib/small; then
- dflt='small'
- else
- dflt=''
- fi
- if $test -d /lib/medium || $test -d /usr/lib/medium; then
- dflt="$dflt medium"
- fi
- if $test -d /lib/large || $test -d /usr/lib/large; then
- dflt="$dflt large"
- fi
- if $test -d /lib/huge || $test -d /usr/lib/huge; then
- dflt="$dflt huge"
- fi
- esac
- fi;;
-*) dflt="$models";;
+: decide how portable to be. Allow command line overrides.
+case "$d_portable" in
+"$undef") ;;
+*) d_portable="$define" ;;
esac
-$cat <<EOM
-
-Some systems have different model sizes. On most systems they are called
-small, medium, large, and huge. On the PDP11 they are called unsplit and
-split. If your system doesn't support different memory models, say "none".
-If you wish to force everything to one memory model, say "none" here and
-put the appropriate flags later when it asks you for other cc and ld flags.
-Venix systems may wish to put "none" and let the compiler figure things out.
-(In the following question multiple model names should be space separated.)
-
-EOM
-rp="Which memory models are supported?"
-. ./myread
-models="$ans"
-case "$models" in
-none)
- small=''
- medium=''
- large=''
- huge=''
- unsplit=''
- split=''
+: set up shell script to do ~ expansion
+cat >filexp <<EOSS
+$startsh
+: expand filename
+case "\$1" in
+ ~/*|~)
+ echo \$1 | $sed "s|~|\${HOME-\$LOGDIR}|"
;;
-*split)
- case "$split" in
- '') if $contains '\-i' $sysman/ld.1 >/dev/null 2>&1 || \
- $contains '\-i' $sysman/cc.1 >/dev/null 2>&1; then
- dflt='-i'
- else
- dflt='none'
- fi;;
- *) dflt="$split";;
- esac
- rp="What flag indicates separate I and D space?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';;
- esac
- split="$tans"
- unsplit='';;
-*large*|*small*|*medium*|*huge*)
- case "$models" in
- *large*)
- case "$large" in
- '') dflt='-Ml';;
- *) dflt="$large";;
- esac
- rp="What flag indicates large model?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';
- esac
- large="$tans";;
- *) large='';;
- esac
- case "$models" in
- *huge*) case "$huge" in
- '') dflt='-Mh';;
- *) dflt="$huge";;
- esac
- rp="What flag indicates huge model?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';
- esac
- huge="$tans";;
- *) huge="$large";;
- esac
- case "$models" in
- *medium*) case "$medium" in
- '') dflt='-Mm';;
- *) dflt="$medium";;
- esac
- rp="What flag indicates medium model?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';
- esac
- medium="$tans";;
- *) medium="$large";;
- esac
- case "$models" in
- *small*) case "$small" in
- '') dflt='none';;
- *) dflt="$small";;
- esac
- rp="What flag indicates small model?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';
+ ~*)
+ if $test -f /bin/csh; then
+ /bin/csh -f -c "glob \$1"
+ failed=\$?
+ echo ""
+ exit \$failed
+ else
+ name=\`$expr x\$1 : '..\([^/]*\)'\`
+ dir=\`$sed -n -e "/^\${name}:/{s/^[^:]*:[^:]*:[^:]*:[^:]*:[^:]*:\([^:]*\).*"'\$'"/\1/" -e p -e q -e '}' </etc/passwd\`
+ if $test ! -d "\$dir"; then
+ me=\`basename \$0\`
+ echo "\$me: can't locate home directory for: \$name" >&2
+ exit 1
+ fi
+ case "\$1" in
+ */*)
+ echo \$dir/\`$expr x\$1 : '..[^/]*/\(.*\)'\`
+ ;;
+ *)
+ echo \$dir
+ ;;
esac
- small="$tans";;
- *) small='';;
- esac
+ fi
;;
*)
- echo "Unrecognized memory models--you may have to edit Makefile.SH" >&4
+ echo \$1
;;
esac
-
-: make some quick guesses about what we are up against
-echo " "
-$echo $n "Hmm... $c"
-echo exit 1 >bsd
-echo exit 1 >usg
-echo exit 1 >v7
-echo exit 1 >osf1
-echo exit 1 >eunice
-echo exit 1 >xenix
-echo exit 1 >venix
-d_bsd="$undef"
-$cat /usr/include/signal.h /usr/include/sys/signal.h >foo 2>/dev/null
-if test -f /osf_boot || $contains 'OSF/1' /usr/include/ctype.h >/dev/null 2>&1
-then
- echo "Looks kind of like an OSF/1 system, but we'll see..."
- echo exit 0 >osf1
-elif test `echo abc | tr a-z A-Z` = Abc ; then
- xxx=`./loc addbib blurfl $pth`
- if $test -f $xxx; then
- echo "Looks kind of like a USG system with BSD features, but we'll see..."
- echo exit 0 >bsd
- echo exit 0 >usg
- else
- if $contains SIGTSTP foo >/dev/null 2>&1 ; then
- echo "Looks kind of like an extended USG system, but we'll see..."
- else
- echo "Looks kind of like a USG system, but we'll see..."
- fi
- echo exit 0 >usg
- fi
-elif $contains SIGTSTP foo >/dev/null 2>&1 ; then
- echo "Looks kind of like a BSD system, but we'll see..."
- d_bsd="$define"
- echo exit 0 >bsd
-else
- echo "Looks kind of like a Version 7 system, but we'll see..."
- echo exit 0 >v7
-fi
-case "$eunicefix" in
-*unixtovms*)
- $cat <<'EOI'
-There is, however, a strange, musty smell in the air that reminds me of
-something...hmm...yes...I've got it...there's a VMS nearby, or I'm a Blit.
-EOI
- echo exit 0 >eunice
- d_eunice="$define"
-: it so happens the Eunice I know will not run shell scripts in Unix format
- ;;
-*)
- echo " "
- echo "Congratulations. You aren't running Eunice."
- d_eunice="$undef"
- ;;
-esac
-if test -f /xenix; then
- echo "Actually, this looks more like a XENIX system..."
- echo exit 0 >xenix
- d_xenix="$define"
-else
- echo " "
- echo "It's not Xenix..."
- d_xenix="$undef"
-fi
-chmod +x xenix
-$eunicefix xenix
-if test -f /venix; then
- echo "Actually, this looks more like a VENIX system..."
- echo exit 0 >venix
-else
- echo " "
- if ./xenix; then
- : null
- else
- echo "Nor is it Venix..."
- fi
-fi
-chmod +x bsd usg v7 osf1 eunice xenix venix
-$eunicefix bsd usg v7 osf1 eunice xenix venix
-$rm -f foo
-
-: see if we need a special compiler
-echo " "
-if ./usg; then
- case "$cc" in
- '') case "$Mcc" in
- /*) dflt='Mcc';;
- *) case "$large" in
- -M*) dflt='cc';;
- *) if $contains '\-M' $sysman/cc.1 >/dev/null 2>&1 ; then
- if $contains '\-M' $sysman/cpp.1 >/dev/null 2>&1; then
- dflt='cc'
- else
- dflt='cc -M'
- fi
- else
- dflt='cc'
- fi;;
- esac;;
- esac;;
- *) dflt="$cc";;
- esac
- $cat <<'EOM'
-On some systems the default C compiler will not resolve multiple global
-references that happen to have the same name. On some such systems the "Mcc"
-command may be used to force these to be resolved. On other systems a "cc -M"
-command is required. (Note that the -M flag on other systems indicates a
-memory model to use!) If you have the Gnu C compiler, you might wish to use
-that instead.
-
-EOM
- rp="What command will force resolution on this system?"
- . ./myread
- cc="$ans"
-else
- case "$cc" in
- '') dflt=cc;;
- *) dflt="$cc";;
- esac
- rp="Use which C compiler?"
- . ./myread
- cc="$ans"
-fi
-echo " "
-echo "Checking for GNU cc in disguise and/or its version number..." >&4
-$cat >gccvers.c <<EOM
-#include <stdio.h>
-int main() {
-#ifdef __GNUC__
-#ifdef __VERSION__
- printf("%s\n", __VERSION__);
-#else
- printf("%s\n", "1");
-#endif
-#endif
- exit(0);
-}
-EOM
-if $cc -o gccvers gccvers.c >/dev/null 2>&1; then
- gccversion=`./gccvers`
- case "$gccversion" in
- '') echo "You are not using GNU cc." ;;
- *) echo "You are using GNU cc $gccversion." ;;
- esac
-else
- echo "I can't compile the test program -- Assuming it isn't GNU cc."
-fi
-$rm -f gccvers*
-case "$gccversion" in
-1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-esac
-
-: decide how portable to be
-case "$d_portable" in
-"$define") dflt=y;;
-*) dflt=n;;
-esac
-$cat <<'EOH'
-
-I can set things up so that your shell scripts and binaries are more portable,
-at what may be a noticable cost in performance. In particular, if you
-ask to be portable, the following happens:
-
- 1) Shell scripts will rely on the PATH variable rather than using
- the paths derived above.
- 2) ~username interpretations will be done at run time rather than
- by Configure.
-
-EOH
-rp="Do you expect to run these scripts and binaries on multiple machines?"
-. ./myread
-case "$ans" in
- y*) d_portable="$define"
- ;;
- *) d_portable="$undef" ;;
-esac
-
-: set up shell script to do ~ expansion
-cat >filexp <<EOSS
-$startsh
-: expand filename
-case "\$1" in
- ~/*|~)
- echo \$1 | $sed "s|~|\${HOME-\$LOGDIR}|"
- ;;
- ~*)
- if $test -f /bin/csh; then
- /bin/csh -f -c "glob \$1"
- failed=\$?
- echo ""
- exit \$failed
- else
- name=\`$expr x\$1 : '..\([^/]*\)'\`
- dir=\`$sed -n -e "/^\${name}:/{s/^[^:]*:[^:]*:[^:]*:[^:]*:[^:]*:\([^:]*\).*"'\$'"/\1/" -e p -e q -e '}' </etc/passwd\`
- if $test ! -d "\$dir"; then
- me=\`basename \$0\`
- echo "\$me: can't locate home directory for: \$name" >&2
- exit 1
- fi
- case "\$1" in
- */*)
- echo \$dir/\`$expr x\$1 : '..[^/]*/\(.*\)'\`
- ;;
- *)
- echo \$dir
- ;;
- esac
- fi
- ;;
-*)
- echo \$1
- ;;
-esac
-EOSS
-chmod +x filexp
-$eunicefix filexp
+EOSS
+chmod +x filexp
+$eunicefix filexp
: now set up to get a file name
cat <<'EOSC' >getfile
rm -f getfile.ok
EOSC
-: What should the include directory be ?
-echo " "
-$echo $n "Hmm... $c"
-dflt='/usr/include'
-incpath=''
-mips_type=''
-if $test -f /bin/mips && /bin/mips; then
- echo "Looks like a MIPS system..."
- $cat >usr.c <<'EOCP'
-#ifdef SYSTYPE_BSD43
-/bsd43
-#endif
-EOCP
- if $cc -E usr.c > usr.out && $contains / usr.out >/dev/null 2>&1; then
- dflt='/bsd43/usr/include'
- incpath='/bsd43'
- mips_type='BSD 4.3'
- else
- mips_type='System V'
- fi
- $rm -f usr.c usr.out
- echo "and you're compiling with the $mips_type compiler and libraries."
- echo "exit 0" >mips
-else
- echo "Doesn't look like a MIPS system."
- echo "exit 1" >mips
-fi
-chmod +x mips
-$eunicefix mips
-echo " "
-case "$usrinc" in
-'') ;;
-*) dflt="$usrinc";;
+: determine root of directory hierarchy where package will be installed.
+case "$prefix" in
+'')
+ dflt=`./loc . /usr/local /usr/local /local /opt /usr`
+ ;;
+*)
+ dflt="$prefix"
+ ;;
esac
-fn=d/
-rp='Where are the include files you want to use?'
-. ./getfile
-usrinc="$ans"
-
-: see how we invoke the C preprocessor
-echo " "
-echo "Now, how can we feed standard input to your C preprocessor..." >&4
-cat <<'EOT' >testcpp.c
-#define ABC abc
-#define XYZ xyz
-ABC.XYZ
-EOT
-cd ..
-echo 'cat >.$$.c; '"$cc"' -E ${1+"$@"} .$$.c; rm .$$.c' >cppstdin
-chmod 755 cppstdin
-wrapper=`pwd`/cppstdin
-ok='false'
-cd UU
+$cat <<EOM
-if $test "X$cppstdin" != "X" && \
- $cppstdin $cppminus <testcpp.c >testcpp.out 2>&1 && \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
-then
- echo "You used to use $cppstdin $cppminus so we'll use that again."
- case "$cpprun" in
- '') echo "But let's see if we can live without a wrapper..." ;;
- *)
- if $cpprun $cpplast <testcpp.c >testcpp.out 2>&1 && \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
- then
- echo "(And we'll use $cpprun $cpplast to preprocess directly.)"
- ok='true'
- else
- echo "(However, $cpprun $cpplast does not work, let's see...)"
- fi
- ;;
+By default, $package will be installed in $dflt/bin, manual
+pages under $dflt/man, etc..., i.e. with $dflt as prefix for
+all installation directories. Typically set to /usr/local, but you
+may choose /usr if you wish to install $package among your system
+binaries. If you wish to have binaries under /bin but manual pages
+under /usr/local/man, that's ok: you will be prompted separately
+for each of the installation directories, the prefix being only used
+to set the defaults.
+
+EOM
+fn=d~
+rp='Installation prefix to use?'
+. ./getfile
+oldprefix=''
+case "$prefix" in
+'') ;;
+*)
+ case "$ans" in
+ "$prefix") ;;
+ *) oldprefix="$prefix";;
esac
-else
- case "$cppstdin" in
- '') ;;
+ ;;
+esac
+prefix="$ans"
+prefixexp="$ansexp"
+
+: set the prefixit variable, to compute a suitable default value
+prefixit='case "$3" in
+""|none)
+ case "$oldprefix" in
+ "") eval "$1=\"\$$2\"";;
*)
- echo "Good old $cppstdin $cppminus does not seem to be of any help..."
- ;;
+ case "$3" in
+ "") eval "$1=";;
+ none)
+ eval "tp=\"\$$2\"";
+ case "$tp" in
+ ""|" ") eval "$1=\"\$$2\"";;
+ *) eval "$1=";;
+ esac;;
+ esac;;
+ esac;;
+*)
+ eval "tp=\"$oldprefix-\$$2-\""; eval "tp=\"$tp\"";
+ case "$tp" in
+ --|/*--|\~*--) eval "$1=\"$prefix/$3\"";;
+ /*-$oldprefix/*|\~*-$oldprefix/*)
+ eval "$1=\`echo \$$2 | sed \"s,^$oldprefix,$prefix,\"\`";;
+ *) eval "$1=\"\$$2\"";;
+ esac;;
+esac'
+
+: determine where private library files go
+: Usual default is /usr/local/lib/perl5. Also allow things like
+: /opt/perl/lib, since /opt/perl/lib/perl5 would be redundant.
+case "$prefix" in
+*perl*) set dflt privlib lib ;;
+*) set dflt privlib lib/$package ;;
+esac
+eval $prefixit
+$cat <<EOM
+
+There are some auxiliary files for $package that need to be put into a
+private library directory that is accessible by everyone.
+
+EOM
+fn=d~+
+rp='Pathname where the private library files will reside?'
+. ./getfile
+if $test "X$privlibexp" != "X$ansexp"; then
+ installprivlib=''
+fi
+privlib="$ans"
+privlibexp="$ansexp"
+if $afs; then
+ $cat <<EOM
+
+Since you are running AFS, I need to distinguish the directory in which
+private files reside from the directory in which they are installed (and from
+which they are presumably copied to the former directory by occult means).
+
+EOM
+ case "$installprivlib" in
+ '') dflt=`echo $privlibexp | sed 's#^/afs/#/afs/.#'`;;
+ *) dflt="$installprivlib";;
esac
+ fn=de~
+ rp='Where will private files be installed?'
+ . ./getfile
+ installprivlib="$ans"
+else
+ installprivlib="$privlibexp"
fi
-if $ok; then
- : nothing
-elif echo 'Maybe "'"$cc"' -E" will work...'; \
- $cc -E <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "Yup, it does."
- x_cpp="$cc -E"
- x_minus='';
-elif echo 'Nope...maybe "'"$cc"' -E -" will work...'; \
- $cc -E - <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "Yup, it does."
- x_cpp="$cc -E"
- x_minus='-';
-elif echo 'Nope...maybe "'"$cc"' -P" will work...'; \
- $cc -P <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "Yipee, that works!"
- x_cpp="$cc -P"
- x_minus='';
-elif echo 'Nope...maybe "'"$cc"' -P -" will work...'; \
- $cc -P - <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "At long last!"
- x_cpp="$cc -P"
- x_minus='-';
-elif echo 'No such luck, maybe "'$cpp'" will work...'; \
- $cpp <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "It works!"
- x_cpp="$cpp"
- x_minus='';
-elif echo 'Nixed again...maybe "'$cpp' -" will work...'; \
- $cpp - <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "Hooray, it works! I was beginning to wonder."
- x_cpp="$cpp"
- x_minus='-';
-elif echo 'Uh-uh. Time to get fancy. Trying a wrapper...'; \
- $wrapper <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- x_cpp="$wrapper"
- x_minus=''
- echo "Eureka!"
+: set the base revision
+baserev=5.0
+
+: get the patchlevel
+echo " "
+echo "Getting the current patchlevel..." >&4
+if $test -r ../patchlevel.h;then
+ patchlevel=`awk '/PATCHLEVEL/ {print $3}' < ../patchlevel.h`
+ subversion=`awk '/SUBVERSION/ {print $3}' < ../patchlevel.h`
else
- dflt=''
- rp="No dice. I can't find a C preprocessor. Name one:"
- . ./myread
- x_cpp="$ans"
- x_minus=''
- $x_cpp <testcpp.c >testcpp.out 2>&1
- if $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "OK, that will do." >&4
- else
-echo "Sorry, I can't get that to work. Go find one and rerun Configure." >&4
- exit 1
- fi
+ patchlevel=0
+ subversion=0
fi
+echo "(You have $package $baserev PL$patchlevel sub$subversion.)"
-case "$ok" in
-false)
- cppstdin="$x_cpp"
- cppminus="$x_minus"
- cpprun="$x_cpp"
- cpplast="$x_minus"
- set X $x_cpp
- shift
- case "$1" in
- "$cpp")
- echo "Perhaps can we force $cc -E using a wrapper..."
- if $wrapper <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
- then
- echo "Yup, we can."
- cppstdin="$wrapper"
- cppminus='';
- else
- echo "Nope, we'll have to live without it..."
- fi
+: set the prefixup variable, to restore leading tilda escape
+prefixup='case "$prefixexp" in
+"$prefix") ;;
+*) eval "$1=\`echo \$$1 | sed \"s,^$prefixexp,$prefix,\"\`";;
+esac'
+
+: determine where public architecture dependent libraries go
+set archlib archlib
+eval $prefixit
+case "$archlib" in
+'')
+ case "$privlib" in
+ '')
+ dflt=`./loc . "." $prefixexp/lib /usr/local/lib /usr/lib /lib`
+ set dflt
+ eval $prefixup
;;
- esac
- case "$cpprun" in
- "$wrapper")
- cpprun=''
- cpplast=''
+ *) version=`echo $baserev $patchlevel $subversion | \
+ $awk '{print $1 + $2/1000.0 + $3/100000.0}'`
+ dflt="$privlib/$archname/$version"
;;
esac
;;
+*) dflt="$archlib";;
esac
+cat <<EOM
-case "$cppstdin" in
-"$wrapper") ;;
-*) $rm -f $wrapper;;
-esac
-$rm -f testcpp.c testcpp.out
+$spackage contains architecture-dependent library files. If you are
+sharing libraries in a heterogeneous environment, you might store
+these files in a separate location. Otherwise, you can just include
+them with the rest of the public library files.
-: determine optimize, if desired, or use for debug flag also
-case "$optimize" in
-' ') dflt='none';;
-'') dflt='-O';;
-*) dflt="$optimize";;
-esac
-$cat <<EOH
+EOM
+fn=d+~
+rp='Where do you want to put the public architecture-dependent libraries?'
+. ./getfile
+archlib="$ans"
+archlibexp="$ansexp"
-Some C compilers have problems with their optimizers, by default, $package
-compiles with the -O flag to use the optimizer. Alternately, you might want
-to use the symbolic debugger, which uses the -g flag (on traditional Unix
-systems). Either flag can be specified here. To use neither flag, specify
-the word "none".
+if $afs; then
+ $cat <<EOM
-EOH
-rp="What optimizer/debugger flag should be used?"
-. ./myread
-optimize="$ans"
-case "$optimize" in
-'none') optimize=" ";;
-esac
+Since you are running AFS, I need to distinguish the directory in which
+private files reside from the directory in which they are installed (and from
+which they are presumably copied to the former directory by occult means).
-dflt=''
-case "$ccflags" in
-'')
- case "$gccversion" in
- 1*) dflt='-fpcc-struct-return' ;;
+EOM
+ case "$installarchlib" in
+ '') dflt=`echo $archlibexp | sed 's#^/afs/#/afs/.#'`;;
+ *) dflt="$installarchlib";;
esac
- case "$optimize" in
- *-g*) dflt="$dflt -DDEBUGGING";;
- esac
- case "$gccversion" in
- 2*) if test -d /etc/conf/kconfig.d &&
- $contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- then
- dflt="$dflt -posix"
- fi
- ;;
- esac
- ;;
-esac
-
-case "$mips_type" in
-*BSD*) ;;
-'') ;;
-*) inclwanted="$inclwanted $usrinc/bsd";;
-esac
-for thisincl in $inclwanted; do
- if $test -d $thisincl; then
- if $test x$thisincl != x$usrinc; then
- case "$dflt" in
- *$thisincl*);;
- *) dflt="$dflt -I$thisincl";;
- esac
- fi
- fi
-done
-
-inctest='if $contains $2 $usrinc/$1 >/dev/null 2>&1; then
- xxx=true;
-elif $contains $2 $usrinc/sys/$1 >/dev/null 2>&1; then
- xxx=true;
+ fn=de~
+ rp='Where will architecture-dependent library files be installed?'
+ . ./getfile
+ installarchlib="$ans"
else
- xxx=false;
-fi;
-if $xxx; then
- case "$dflt" in
- *$2*);;
- *) dflt="$dflt -D$2";;
- esac;
-fi'
-
-if ./osf1; then
- set signal.h __LANGUAGE_C__; eval $inctest
+ installarchlib="$archlibexp"
+fi
+if $test X"$archlib" = X"$privlib"; then
+ d_archlib="$undef"
else
- set signal.h LANGUAGE_C; eval $inctest
+ d_archlib="$define"
fi
-set signal.h NO_PROTOTYPE; eval $inctest
-set signal.h _NO_PROTO; eval $inctest
-
-case "$dflt" in
-'') dflt=none;;
-esac
-case "$ccflags" in
-'') ;;
-*) dflt="$ccflags";;
-esac
-$cat <<EOH
-
-Your C compiler may want other flags. For this question you should include
--I/whatever and -DWHATEVER flags and any other flags used by the C compiler,
-but you should NOT include libraries or ld flags like -lwhatever. If you
-want $package to honor its debug switch, you should include -DDEBUGGING here.
-Your C compiler might also need additional flags, such as -D_POSIX_SOURCE,
--DHIDEMYMALLOC or -DCRIPPLED_CC.
-
-To use no flags, specify the word "none".
-EOH
-set X $dflt
-shift
-dflt=${1+"$@"}
-rp="Any additional cc flags?"
+: set up the script used to warn in case of inconsistency
+cat <<'EOSC' >whoa
+dflt=y
+echo " "
+echo "*** WHOA THERE!!! ***" >&4
+echo " The $hint value for \$$var on this machine was \"$was\"!" >&4
+rp=" Keep the $hint value?"
. ./myread
case "$ans" in
-none) ccflags='';;
-*) ccflags="$ans";;
+y) td=$was; tu=$was;;
esac
+EOSC
-: the following weeds options from ccflags that are of no interest to cpp
-cppflags="$ccflags"
-case "$gccversion" in
-1*) cppflags="$cppflags -D__GNUC__"
-esac
-case "$mips_type" in
-'');;
-*BSD*) cppflags="$cppflags -DSYSTYPE_BSD43";;
-esac
-case "$cppflags" in
-'');;
-*)
- echo " "
- echo "Let me guess what the preprocessor flags are..." >&4
- set X $cppflags
- shift
- cppflags=''
- $cat >cpp.c <<'EOM'
-#define BLURFL foo
+: function used to set $1 to $val
+setvar='var=$1; eval "was=\$$1"; td=$define; tu=$undef;
+case "$val$was" in
+$define$undef) . ./whoa; eval "$var=\$td";;
+$undef$define) . ./whoa; eval "$var=\$tu";;
+*) eval "$var=$val";;
+esac'
-BLURFL xx LFRULB
-EOM
- previous=''
- for flag in $*
- do
- case "$flag" in
- -*) ftry="$flag";;
- *) ftry="$previous $flag";;
- esac
- if $cppstdin -DLFRULB=bar $ftry $cppminus <cpp.c \
- >cpp1.out 2>/dev/null && \
- $cpprun -DLFRULB=bar $ftry $cpplast <cpp.c \
- >cpp2.out 2>/dev/null && \
- $contains 'foo.*xx.*bar' cpp1.out >/dev/null 2>&1 && \
- $contains 'foo.*xx.*bar' cpp2.out >/dev/null 2>&1
- then
- cppflags="$cppflags $ftry"
- previous=''
+: make some quick guesses about what we are up against
+echo " "
+$echo $n "Hmm... $c"
+echo exit 1 >bsd
+echo exit 1 >usg
+echo exit 1 >v7
+echo exit 1 >osf1
+echo exit 1 >eunice
+echo exit 1 >xenix
+echo exit 1 >venix
+d_bsd="$undef"
+$cat /usr/include/signal.h /usr/include/sys/signal.h >foo 2>/dev/null
+if test -f /osf_boot || $contains 'OSF/1' /usr/include/ctype.h >/dev/null 2>&1
+then
+ echo "Looks kind of like an OSF/1 system, but we'll see..."
+ echo exit 0 >osf1
+elif test `echo abc | tr a-z A-Z` = Abc ; then
+ xxx=`./loc addbib blurfl $pth`
+ if $test -f $xxx; then
+ echo "Looks kind of like a USG system with BSD features, but we'll see..."
+ echo exit 0 >bsd
+ echo exit 0 >usg
+ else
+ if $contains SIGTSTP foo >/dev/null 2>&1 ; then
+ echo "Looks kind of like an extended USG system, but we'll see..."
else
- previous="$flag"
+ echo "Looks kind of like a USG system, but we'll see..."
fi
- done
- set X $cppflags
- shift
- cppflags=${1+"$@"}
- case "$cppflags" in
- *-*) echo "They appear to be: $cppflags";;
- esac
- $rm -f cpp.c cpp?.out
+ echo exit 0 >usg
+ fi
+elif $contains SIGTSTP foo >/dev/null 2>&1 ; then
+ echo "Looks kind of like a BSD system, but we'll see..."
+ d_bsd="$define"
+ echo exit 0 >bsd
+else
+ echo "Looks kind of like a Version 7 system, but we'll see..."
+ echo exit 0 >v7
+fi
+case "$eunicefix" in
+*unixtovms*)
+ $cat <<'EOI'
+There is, however, a strange, musty smell in the air that reminds me of
+something...hmm...yes...I've got it...there's a VMS nearby, or I'm a Blit.
+EOI
+ echo exit 0 >eunice
+ d_eunice="$define"
+: it so happens the Eunice I know will not run shell scripts in Unix format
+ ;;
+*)
+ echo " "
+ echo "Congratulations. You aren't running Eunice."
+ d_eunice="$undef"
;;
esac
-
-: flags used in final linking phase
-case "$ldflags" in
-'') if ./venix; then
- dflt='-i -z'
+if test -f /xenix; then
+ echo "Actually, this looks more like a XENIX system..."
+ echo exit 0 >xenix
+ d_xenix="$define"
+else
+ echo " "
+ echo "It's not Xenix..."
+ d_xenix="$undef"
+fi
+chmod +x xenix
+$eunicefix xenix
+if test -f /venix; then
+ echo "Actually, this looks more like a VENIX system..."
+ echo exit 0 >venix
+else
+ echo " "
+ if ./xenix; then
+ : null
else
- dflt=''
+ echo "Nor is it Venix..."
fi
- case "$ccflags" in
- *-posix*) dflt="$dflt -posix" ;;
- esac
- case "$dflt" in
- '') dflt='none' ;;
- esac
- ;;
-*) dflt="$ldflags";;
-esac
-echo " "
-rp="Any additional ld flags (NOT including libraries)?"
-. ./myread
-case "$ans" in
-none) ldflags='';;
-*) ldflags="$ans";;
-esac
-rmlist="$rmlist pdp11"
+fi
+chmod +x bsd usg v7 osf1 eunice xenix venix
+$eunicefix bsd usg v7 osf1 eunice xenix venix
+$rm -f foo
-: Set private lib path
-case "$plibpth" in
-'') if ./mips; then
- plibpth="$incpath/usr/lib /usr/local/lib /usr/ccs/lib"
- fi;;
-esac
-case "$libpth" in
-' ') dlist='';;
-'') dlist="$plibpth $glibpth";;
-*) dlist="$libpth";;
-esac
+: see if setuid scripts can be secure
+$cat <<EOM
-: Now check and see which directories actually exist, avoiding duplicates
-libpth=''
-for xxx in $dlist
-do
- if $test -d $xxx; then
- case " $libpth " in
- *" $xxx "*) ;;
- *) libpth="$libpth $xxx";;
- esac
- fi
-done
-$cat <<'EOM'
+Some kernels have a bug that prevents setuid #! scripts from being
+secure. Some sites have disabled setuid #! scripts because of this.
-Some systems have incompatible or broken versions of libraries. Among
-the directories listed in the question below, please remove any you
-know not to be holding relevant libraries, and add any that are needed.
-Say "none" for none.
+First let's decide if your kernel supports secure setuid #! scripts.
+(If setuid #! scripts would be secure but have been disabled anyway,
+don't say that they are secure if asked.)
EOM
-case "$libpth" in
-'') dflt='none';;
-*)
- set X $libpth
- shift
- dflt=${1+"$@"}
- ;;
-esac
-rp="Directories to use for library searches?"
-. ./myread
-case "$ans" in
-none) libpth=' ';;
-*) libpth="$ans";;
-esac
-: compute shared library extension
-case "$so" in
-'')
- if xxx=`./loc libc.sl X $libpth`; $test -f "$xxx"; then
- dflt='sl'
+val="$undef"
+if $test -d /dev/fd; then
+ echo "#!$ls" >reflect
+ chmod +x,u+s reflect
+ ./reflect >flect 2>&1
+ if $contains "/dev/fd" flect >/dev/null; then
+ echo "Congratulations, your kernel has secure setuid scripts!" >&4
+ val="$define"
else
- dflt='so'
- fi
- ;;
-*) dflt="$so";;
-esac
-$cat <<EOM
-
-On some systems, shared libraries may be available. Answer 'none' if
-you want to suppress searching of shared libraries for the remaining
-of this configuration.
+ $cat <<EOM
+If you are not sure if they are secure, I can check but I'll need a
+username and password different from the one you are using right now.
+If you don't have such a username or don't want me to test, simply
+enter 'none'.
EOM
-rp='What is the file extension used for shared libraries?'
-. ./myread
-so="$ans"
-
-: Looking for optional libraries
-echo " "
-echo "Checking for optional libraries..." >&4
-case "$libs" in
-' '|'') dflt='';;
-*) dflt="$libs";;
-esac
-case "$libswanted" in
-'') libswanted='c_s';;
-esac
-for thislib in $libswanted; do
-
- if xxx=`./loc lib$thislib.$so.[0-9]'*' X $libpth`; $test -f "$xxx"; then
- echo "Found -l$thislib (shared)."
- case " $dflt " in
- *"-l$thislib "*);;
- *) dflt="$dflt -l$thislib";;
- esac
- elif xxx=`./loc lib$thislib.$so X $libpth` ; $test -f "$xxx"; then
- echo "Found -l$thislib (shared)."
- case " $dflt " in
- *"-l$thislib "*);;
- *) dflt="$dflt -l$thislib";;
- esac
- elif xxx=`./loc lib$thislib.a X $libpth`; $test -f "$xxx"; then
- echo "Found -l$thislib."
- case " $dflt " in
- *"-l$thislib "*);;
- *) dflt="$dflt -l$thislib";;
- esac
- elif xxx=`./loc lib${thislib}_s.a X $libpth`; $test -f "$xxx"; then
- echo "Found -l${thislib}_s."
- case " $dflt " in
- *"-l$thislib "*);;
- *) dflt="$dflt -l${thislib}_s";;
+ rp='Other username to test security of setuid scripts with?'
+ dflt='none'
+ . ./myread
+ case "$ans" in
+ n|none)
+ case "$d_suidsafe" in
+ '') echo "I'll assume setuid scripts are *not* secure." >&4
+ dflt=n;;
+ "$undef")
+ echo "Well, the $hint value is *not* secure." >&4
+ dflt=n;;
+ *) echo "Well, the $hint value *is* secure." >&4
+ dflt=y;;
+ esac
+ ;;
+ *)
+ $rm -f reflect flect
+ echo "#!$ls" >reflect
+ chmod +x,u+s reflect
+ echo >flect
+ chmod a+w flect
+ echo '"su" will (probably) prompt you for '"$ans's password."
+ su $ans -c './reflect >flect'
+ if $contains "/dev/fd" flect >/dev/null; then
+ echo "Okay, it looks like setuid scripts are secure." >&4
+ dflt=y
+ else
+ echo "I don't think setuid scripts are secure." >&4
+ dflt=n
+ fi
+ ;;
esac
- elif xxx=`./loc Slib$thislib.a X $xlibpth`; $test -f "$xxx"; then
- echo "Found -l$thislib."
- case " $dflt " in
- *"-l$thislib "*);;
- *) dflt="$dflt -l$thislib";;
+ rp='Does your kernel have *secure* setuid scripts?'
+ . ./myread
+ case "$ans" in
+ [yY]*) val="$define";;
+ *) val="$undef";;
esac
- else
- echo "No -l$thislib."
fi
-done
-set X $dflt
-shift
-dflt="$*"
-case "$libs" in
-'') dflt="$dflt";;
-*) dflt="$libs";;
-esac
-case "$dflt" in
-' '|'') dflt='none';;
-esac
-
-$cat <<EOM
-
-Some versions of Unix support shared libraries, which make executables smaller
-but make load time slightly longer.
+else
+ echo "I don't think setuid scripts are secure (no /dev/fd directory)." >&4
+ val="$undef"
+fi
+set d_suidsafe
+eval $setvar
-On some systems, mostly newer Unix System V's, the shared library is included
-by putting the option "-lc_s" as the last thing on the cc command line when
-linking. Other systems use shared libraries by default. There may be other
-libraries needed to compile $package on your machine as well. If your system
-needs the "-lc_s" option, include it here. Include any other special libraries
-here as well. Say "none" for none.
-EOM
+$rm -f reflect flect
+: now see if they want to do setuid emulation
echo " "
-rp="Any additional libraries?"
-. ./myread
-case "$ans" in
-none) libs=' ';;
-*) libs="$ans";;
-esac
-
-: see if nm is to be used to determine whether a symbol is defined or not
-case "$usenm" in
-'')
- dflt=`egrep 'inlibc|csym' ../Configure | wc -l 2>/dev/null`
- if $test $dflt -gt 20; then
- dflt=y
- else
- dflt=n
- fi
+val="$undef"
+case "$d_suidsafe" in
+"$define")
+ val="$undef"
+ echo "No need to emulate SUID scripts since they are secure here." >& 4
;;
*)
- case "$usenm" in
- true) dflt=y;;
- *) dflt=n;;
+ $cat <<EOM
+Some systems have disabled setuid scripts, especially systems where
+setuid scripts cannot be secure. On systems where setuid scripts have
+been disabled, the setuid/setgid bits on scripts are currently
+useless. It is possible for $package to detect those bits and emulate
+setuid/setgid in a secure fashion. This emulation will only work if
+setuid scripts have been disabled in your kernel.
+
+EOM
+ case "$d_dosuid" in
+ "$define") dflt=y ;;
+ *) dflt=n ;;
+ esac
+ rp="Do you want to do setuid/setgid emulation?"
+ . ./myread
+ case "$ans" in
+ [yY]*) val="$define";;
+ *) val="$undef";;
esac
;;
esac
+set d_dosuid
+eval $setvar
+
+: determine where site specific libraries go.
+set sitelib sitelib
+eval $prefixit
+case "$sitelib" in
+'') dflt="$privlib/site_perl" ;;
+*) dflt="$sitelib" ;;
+esac
$cat <<EOM
-I can use 'nm' to extract the symbols from your C libraries. This is a time
-consuming task which may generate huge output on the disk (up to 3 megabytes)
-but that should make the symbols extraction faster. The alternative is to skip
-the 'nm' extraction part and to compile a small test program instead to
-determine whether each symbol is present. If you have a fast C compiler and/or
-if your 'nm' output cannot be parsed, this may be the best solution.
+The installation process will also create a directory for
+site-specific extensions and modules. Some users find it convenient
+to place all local files in this directory rather than in the main
+distribution directory.
EOM
-rp='Shall I use nm to extract C symbols from the libraries?'
-. ./myread
-case "$ans" in
-n|N) usenm=false;;
-*) usenm=true;;
-esac
+fn=d~+
+rp='Pathname for the site-specific library files?'
+. ./getfile
+if $test "X$sitelibexp" != "X$ansexp"; then
+ installsitelib=''
+fi
+sitelib="$ans"
+sitelibexp="$ansexp"
+if $afs; then
+ $cat <<EOM
-runnm=$usenm
-case "$reuseval" in
-true) runnm=false;;
-esac
+Since you are running AFS, I need to distinguish the directory in which
+private files reside from the directory in which they are installed (and from
+which they are presumably copied to the former directory by occult means).
-: nm options which may be necessary
-case "$nm_opt" in
-'') if $test -f /mach_boot; then
- nm_opt=''
- elif $test -d /usr/ccs/lib; then
- nm_opt='-p'
- elif $test -f /dgux; then
- nm_opt='-p'
- else
- nm_opt=''
- fi;;
-esac
+EOM
+ case "$installsitelib" in
+ '') dflt=`echo $sitelibexp | sed 's#^/afs/#/afs/.#'`;;
+ *) dflt="$installsitelib";;
+ esac
+ fn=de~
+ rp='Where will private files be installed?'
+ . ./getfile
+ installsitelib="$ans"
+else
+ installsitelib="$sitelibexp"
+fi
-case "$runnm" in
-true)
-: get list of predefined functions in a handy place
-echo " "
-case "$libc" in
-'') libc=unknown
- case "$libs" in
- *-lc_s*) libc=`./loc libc_s.a $libc $libpth`
- esac
- ;;
+: determine where site specific architecture-dependent libraries go.
+xxx=`echo $sitelib/$archname | sed 's!^$prefix!!'`
+: xxx is usuually lib/site_perl/archname.
+set sitearch sitearch none
+eval $prefixit
+case "$sitearch" in
+'') dflt="$sitelib/$archname" ;;
+*) dflt="$sitearch" ;;
esac
-libnames='';
-case "$libs" in
-'') ;;
-*) for thislib in $libs; do
- case "$thislib" in
- -lc|-lc_s)
- : Handle C library specially below.
- ;;
- -l*)
- thislib=`echo $thislib | $sed -e 's/^-l//'`
- if try=`./loc lib$thislib.$so.'*' X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc lib$thislib.$so X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc lib$thislib.a X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc lib$thislib X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc $thislib X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc Slib$thislib.a X $xlibpth`; $test -f "$try"; then
- :
- else
- try=''
- fi
- libnames="$libnames $try"
+$cat <<EOM
+
+The installation process will also create a directory for
+architecture-dependent site-specific extensions and modules.
+
+EOM
+fn=nd~+
+rp='Pathname for the site-specific architecture-dependent library files?'
+. ./getfile
+if $test "X$sitearchexp" != "X$ansexp"; then
+ installsitearch=''
+fi
+sitearch="$ans"
+sitearchexp="$ansexp"
+if $afs; then
+ $cat <<EOM
+
+Since you are running AFS, I need to distinguish the directory in which
+private files reside from the directory in which they are installed (and from
+which they are presumably copied to the former directory by occult means).
+
+EOM
+ case "$installsitearch" in
+ '') dflt=`echo $sitearchexp | sed 's#^/afs/#/afs/.#'`;;
+ *) dflt="$installsitearch";;
+ esac
+ fn=de~
+ rp='Where will private files be installed?'
+ . ./getfile
+ installsitearch="$ans"
+else
+ installsitearch="$sitearchexp"
+fi
+
+: determine where old public architecture dependent libraries might be
+case "$oldarchlib" in
+'') case "$privlib" in
+ '') ;;
+ *) dflt="$privlib/$archname"
;;
- *) libnames="$libnames $thislib" ;;
esac
- done
- ;;
-esac
-xxx=normal
-case "$libc" in
-unknown)
- set /usr/ccs/lib/libc.$so
- $test -r $1 || set /usr/lib/libc.$so
- $test -r $1 || set /usr/shlib/libc.$so
- $test -r $1 || set /usr/lib/libc.$so.[0-9]*
- $test -r $1 || set /lib/libc.$so
- $test -r $1 || set /lib/libsys_s.a
- eval set \$$#
;;
-*)
- set blurfl
+*) dflt="$oldarchlib"
;;
esac
-if $test -r "$1"; then
- echo "Your (shared) C library seems to be in $1."
- libc="$1"
-elif $test -r /lib/libc && $test -r /lib/clib; then
- echo "Your C library seems to be in both /lib/clib and /lib/libc."
- xxx=apollo
- libc='/lib/clib /lib/libc'
- if $test -r /lib/syslib; then
- echo "(Your math library is in /lib/syslib.)"
- libc="$libc /lib/syslib"
- fi
-elif $test -r "$libc" || (test -h "$libc") >/dev/null 2>&1; then
- echo "Your C library seems to be in $libc, as you said before."
-elif $test -r $incpath/usr/lib/libc.a; then
- libc=$incpath/usr/lib/libc.a;
- echo "Your C library seems to be in $libc. That's fine."
-elif $test -r /lib/libc.a; then
- libc=/lib/libc.a;
- echo "Your C library seems to be in $libc. You're normal."
-else
- if tans=`./loc libc.a blurfl/dyick $libpth`; $test -r "$tans"; then
- :
- elif tans=`./loc libc blurfl/dyick $libpth`; $test -r "$tans"; then
- libnames="$libnames "`./loc clib blurfl/dyick $libpth`
- elif tans=`./loc clib blurfl/dyick $libpth`; $test -r "$tans"; then
- :
- elif tans=`./loc Slibc.a blurfl/dyick $xlibpth`; $test -r "$tans"; then
- :
- elif tans=`./loc Mlibc.a blurfl/dyick $xlibpth`; $test -r "$tans"; then
- :
- else
- tans=`./loc Llibc.a blurfl/dyick $xlibpth`
- fi
- if $test -r "$tans"; then
- echo "Your C library seems to be in $tans, of all places."
- libc=$tans
- else
- libc='blurfl'
- fi
+if $test ! -d "$dflt/auto"; then
+ dflt=none
fi
-if $test $xxx = apollo -o -r "$libc" || (test -h "$libc") >/dev/null 2>&1; then
- dflt="$libc"
- cat <<EOM
+cat <<EOM
-If the guess above is wrong (which it might be if you're using a strange
-compiler, or your machine supports multiple models), you can override it here.
+In 5.001, Perl stored architecture-dependent library files in a library
+with a name such as $privlib/$archname,
+and this directory contained files from the standard extensions and
+files from any additional extensions you might have added. Starting
+with version 5.002, all the architecture-dependent standard extensions
+will go into $archlib,
+while locally-added extensions will go into
+$sitearch.
-EOM
-else
- dflt=''
- echo $libpth | tr ' ' '\012' | sort | uniq > libpath
- cat >&4 <<EOM
-I can't seem to find your C library. I've looked in the following places:
+If you wish Perl to continue to search the old architecture-dependent
+library for your local extensions, give the path to that directory.
+If you do not wish to use your old architecture-dependent library
+files, answer 'none'.
EOM
- $sed 's/^/ /' libpath
- cat <<EOM
+fn=dn~
+rp='Directory for your old 5.001 architecture-dependent libraries?'
+. ./getfile
+oldarchlib="$ans"
+oldarchlibexp="$ansexp"
+case "$oldarchlib" in
+''|' ') val="$undef" ;;
+*) val="$define" ;;
+esac
+set d_oldarchlib
+eval $setvar
-None of these seems to contain your C library. I need to get its name...
+: determine where public executables go
+echo " "
+set dflt bin bin
+eval $prefixit
+fn=d~
+rp='Pathname where the public executables will reside?'
+. ./getfile
+if $test "X$ansexp" != "X$binexp"; then
+ installbin=''
+fi
+bin="$ans"
+binexp="$ansexp"
+if $afs; then
+ $cat <<EOM
+
+Since you are running AFS, I need to distinguish the directory in which
+executables reside from the directory in which they are installed (and from
+which they are presumably copied to the former directory by occult means).
EOM
+ case "$installbin" in
+ '') dflt=`echo $binexp | sed 's#^/afs/#/afs/.#'`;;
+ *) dflt="$installbin";;
+ esac
+ fn=de~
+ rp='Where will public executables be installed?'
+ . ./getfile
+ installbin="$ans"
+else
+ installbin="$binexp"
fi
-fn=f
-rp='Where is your C library?'
-. ./getfile
-libc="$ans"
+: determine where manual pages are on this system
echo " "
-echo $libc $libnames | tr ' ' '\012' | sort | uniq > libnames
-set X `cat libnames`
-shift
-xxx=files
-case $# in 1) xxx=file; esac
-echo "Extracting names from the following $xxx for later perusal:" >&4
-echo " "
-$sed 's/^/ /' libnames >&4
-echo " "
-$echo $n "This may take a while...$c" >&4
-
-nm $nm_opt $* 2>/dev/null >libc.tmp
-$echo $n ".$c"
-$grep fprintf libc.tmp > libc.ptf
-xscan='eval "<libc.ptf $com >libc.list"; $echo $n ".$c" >&4'
-xrun='eval "<libc.tmp $com >libc.list"; echo "done" >&4'
-if com="$sed -n -e 's/__IO//' -e 's/^.* [ADTSI] *_[_.]*//p' -e 's/^.* [ADTSI] //p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^__*//' -e 's/^\([a-zA-Z_0-9$]*\).*xtern.*/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e '/|UNDEF/d' -e '/FUNC..GL/s/^.*|__*//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^.* D __*//p' -e 's/^.* D //p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^_//' -e 's/^\([a-zA-Z_0-9]*\).*xtern.*text.*/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^.*|FUNC |GLOB .*|//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$grep '|' | $sed -n -e '/|COMMON/d' -e '/|DATA/d' \
- -e '/ file/d' -e 's/^\([^ ]*\).*/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^.*|FUNC |GLOB .*|//p' -e 's/^.*|FUNC |WEAK .*|//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^__//' -e '/|Undef/d' -e '/|Proc/s/ .*//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e '/Def. Text/s/.* \([^ ]*\)\$/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
+case "$sysman" in
+'')
+ syspath='/usr/man/man1 /usr/man/mann /usr/man/manl /usr/man/local/man1'
+ syspath="$syspath /usr/man/u_man/man1 /usr/share/man/man1"
+ syspath="$syspath /usr/catman/u_man/man1 /usr/man/l_man/man1"
+ syspath="$syspath /usr/local/man/u_man/man1 /usr/local/man/l_man/man1"
+ syspath="$syspath /usr/man/man.L /local/man/man1 /usr/local/man/man1"
+ sysman=`./loc . /usr/man/man1 $syspath`
+ ;;
+esac
+if $test -d "$sysman"; then
+ echo "System manual is in $sysman." >&4
else
- nm -p $* 2>/dev/null >libc.tmp
- com="$sed -n -e 's/^.* [ADTSI] *_[_.]*//p' -e 's/^.* [ADTSI] //p'";\
- eval "<libc.tmp $com >libc.list"
- if $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- nm_opt='-p'
- echo "done" >&4
- else
- echo " "
- echo "nm didn't seem to work right. Trying ar instead..." >&4
- com=''
- if ar t $libc > libc.tmp; then
- for thisname in $libnames; do
- ar t $thisname >>libc.tmp
- done
- $sed -e 's/\.o$//' < libc.tmp > libc.list
- echo "Ok." >&4
- else
- echo "ar didn't seem to work right." >&4
- echo "Maybe this is a Cray...trying bld instead..." >&4
- if bld t $libc | $sed -e 's/.*\///' -e 's/\.o:.*$//' > libc.list; then
- for thisname in $libnames; do
- bld t $libnames | \
- $sed -e 's/.*\///' -e 's/\.o:.*$//' >>libc.list
- ar t $thisname >>libc.tmp
- done
- echo "Ok." >&4
- else
- echo "That didn't work either. Giving up." >&4
- exit 1
- fi
- fi
- fi
+ echo "Could not find manual pages in source form." >&4
fi
-nm_extract="$com"
-if $test -f /lib/syscalls.exp; then
- echo " "
- echo "Also extracting names from /lib/syscalls.exp for good ole AIX..." >&4
- $sed -n 's/^\([^ ]*\)[ ]*syscall$/\1/p' /lib/syscalls.exp >>libc.list
-fi
-;;
-esac
-$rm -f libnames libpath
-: is a C symbol defined?
-csym='tlook=$1;
-case "$3" in
--v) tf=libc.tmp; tc=""; tdc="";;
--a) tf=libc.tmp; tc="[0]"; tdc=[];;
-*) tlook="^$1\$"; tf=libc.list; tc="()"; tdc="()";;
-esac;
-tx=yes;
-case "$reuseval-$4" in
-true-) ;;
-true-*) tx=no; eval "tval=\$$4"; case "$tval" in "") tx=yes;; esac;;
-esac;
-case "$tx" in
-yes)
- case "$runnm" in
- true)
- if $contains $tlook $tf >/dev/null 2>&1;
- then tval=true;
- else tval=false;
- fi;;
- *)
- echo "main() { extern int $1$tdc; printf(\"%d\", $1$tc); }" > t.c;
- if $cc $ccflags -o t t.c $ldflags $libs >/dev/null 2>&1;
- then tval=true;
- else tval=false;
- fi;
- $rm -f t t.c;;
- esac;;
-*)
- case "$tval" in
- $define) tval=true;;
- *) tval=false;;
- esac;;
-esac;
-eval "$2=$tval"'
+: determine where manual pages go
+set man1dir man1dir none
+eval $prefixit
+$cat <<EOM
-: set up the script used to warn in case of inconsistency
-cat <<'EOSC' >whoa
-dflt=y
+$spackage has manual pages available in source form.
+EOM
+case "$nroff" in
+nroff)
+ echo "However, you don't have nroff, so they're probably useless to you."
+ case "$man1dir" in
+ '') man1dir="none";;
+ esac;;
+esac
+echo "If you don't want the manual sources installed, answer 'none'."
+case "$man1dir" in
+' ') dflt=none
+ ;;
+'')
+ lookpath="$prefixexp/man/man1 $prefixexp/man/l_man/man1"
+ lookpath="$lookpath $prefixexp/man/p_man/man1"
+ lookpath="$lookpath $prefixexp/man/u_man/man1"
+ lookpath="$lookpath $prefixexp/man/man.1"
+ : If prefix contains 'perl' then we want to keep the man pages
+ : under the prefix directory. Otherwise, look in a variety of
+ : other possible places. This is debatable, but probably a
+ : good compromise. Well, apparently not.
+ : Experience has shown people expect man1dir to be under prefix,
+ : so we now always put it there. Users who want other behavior
+ : can answer interactively or use a command line option.
+ : Does user have System V-style man paths.
+ case "$sysman" in
+ */?_man*) dflt=`./loc . $prefixexp/l_man/man1 $lookpath` ;;
+ *) dflt=`./loc . $prefixexp/man/man1 $lookpath` ;;
+ esac
+ set dflt
+ eval $prefixup
+ ;;
+*) dflt="$man1dir"
+ ;;
+esac
echo " "
-echo "*** WHOA THERE!!! ***" >&4
-echo " The $hint value for \$$var on this machine was \"$was\"!" >&4
-rp=" Keep the $hint value?"
-. ./myread
-case "$ans" in
-y) td=$was; tu=$was;;
+fn=dn+~
+rp="Where do the main $spackage manual pages (source) go?"
+. ./getfile
+if $test "X$man1direxp" != "X$ansexp"; then
+ installman1dir=''
+fi
+man1dir="$ans"
+man1direxp="$ansexp"
+case "$man1dir" in
+'') man1dir=' '
+ installman1dir='';;
esac
-EOSC
+if $afs; then
+ $cat <<EOM
-: define an is-in-libc? function
-inlibc='echo " "; td=$define; tu=$undef;
-sym=$1; var=$2; eval "was=\$$2";
-tx=yes;
-case "$reuseval$was" in
-true) ;;
-true*) tx=no;;
-esac;
-case "$tx" in
-yes)
- set $sym tres -f;
- eval $csym;
- case "$tres" in
- true)
- echo "$sym() found." >&4;
- case "$was" in $undef) . ./whoa; esac; eval "$var=\$td";;
- *)
- echo "$sym() NOT found." >&4;
- case "$was" in $define) . ./whoa; esac; eval "$var=\$tu";;
- esac;;
-*)
- case "$was" in
- $define) echo "$sym() found." >&4;;
- *) echo "$sym() NOT found." >&4;;
- esac;;
-esac'
+Since you are running AFS, I need to distinguish the directory in which
+manual pages reside from the directory in which they are installed (and from
+which they are presumably copied to the former directory by occult means).
-: see if gconvert exists
-set gconvert d_gconvert
-eval $inlibc
+EOM
+ case "$installman1dir" in
+ '') dflt=`echo $man1direxp | sed 's#^/afs/#/afs/.#'`;;
+ *) dflt="$installman1dir";;
+ esac
+ fn=de~
+ rp='Where will man pages be installed?'
+ . ./getfile
+ installman1dir="$ans"
+else
+ installman1dir="$man1direxp"
+fi
-case "$d_gconvert" in
-$define)
- echo "We'll use it to convert floats into a string then." >&4
- d_Gconvert="gconvert((x),(n),(t),(b))"
+: What suffix to use on installed man pages
+
+case "$man1dir" in
+' ')
+ man1ext='0'
;;
*)
- : Maybe we can emulate it with gcvt.
- set gcvt d_gcvt
- eval $inlibc
+ rp="What suffix should be used for the main $spackage man pages?"
+ case "$man1ext" in
+ '') case "$man1dir" in
+ *1) dflt=1 ;;
+ *1p) dflt=1p ;;
+ *1pm) dflt=1pm ;;
+ *l) dflt=l;;
+ *n) dflt=n;;
+ *o) dflt=o;;
+ *p) dflt=p;;
+ *C) dflt=C;;
+ *L) dflt=L;;
+ *L1) dflt=L1;;
+ *) dflt=1;;
+ esac
+ ;;
+ *) dflt="$man1ext";;
+ esac
+ . ./myread
+ man1ext="$ans"
+ ;;
+esac
- case "$d_gcvt" in
- $define)
- : Test whether gcvt drops a trailing decimal point
- $cat >try.c <<'EOP'
-main() {
- char buf[64];
- gcvt(1.0, 8, buf);
- if (buf[0] != '1' || buf[1] != '\0')
- exit(1);
- gcvt(0.0, 8, buf);
- if (buf[0] != '0' || buf[1] != '\0')
- exit(1);
- gcvt(-1.0, 8, buf);
- if (buf[0] != '-' || buf[1] != '1' || buf[2] != '\0')
- exit(1);
- exit(0);
-}
-EOP
- if $cc $ccflags $ldflags -o try try.c $libs > /dev/null 2>&1; then
- if ./try; then
- echo "Good, your gcvt() drops a trailing decimal point."
- echo "We'll use it to convert floats into a string." >&4
- d_Gconvert="gcvt((x),(n),(b))"
+: see if we can have long filenames
+echo " "
+rmlist="$rmlist /tmp/cf$$"
+$test -d /tmp/cf$$ || mkdir /tmp/cf$$
+first=123456789abcdef
+second=/tmp/cf$$/$first
+$rm -f $first $second
+if (echo hi >$first) 2>/dev/null; then
+ if $test -f 123456789abcde; then
+ echo 'You cannot have filenames longer than 14 characters. Sigh.' >&4
+ val="$undef"
+ else
+ if (echo hi >$second) 2>/dev/null; then
+ if $test -f /tmp/cf$$/123456789abcde; then
+ $cat <<'EOM'
+That's peculiar... You can have filenames longer than 14 characters, but only
+on some of the filesystems. Maybe you are using NFS. Anyway, to avoid problems
+I shall consider your system cannot support long filenames at all.
+EOM
+ val="$undef"
else
- echo "But your gcvt() keeps a trailing decimal point".
- d_Gconvert=''
+ echo 'You can have filenames longer than 14 characters.' >&4
+ val="$define"
fi
else
- echo "Hmm. I can't compile the gcvt test program."
- d_Gconvert=''
+ $cat <<'EOM'
+How confusing! Some of your filesystems are sane enough to allow filenames
+longer than 14 characters but some others like /tmp can't even think about them.
+So, for now on, I shall assume your kernel does not allow them at all.
+EOM
+ val="$undef"
fi
- $rm -f try.c try
- ;;
- esac
- case "$d_Gconvert" in
- '')
- echo "I'll use sprintf instead to convert floats into a string." >&4
- d_Gconvert='sprintf((b),"%.*g",(n),(x))'
- ;;
- esac
-esac
+ fi
+else
+ $cat <<'EOM'
+You can't have filenames longer than 14 chars. You can't even think about them!
+EOM
+ val="$undef"
+fi
+set d_flexfnam
+eval $setvar
+$rm -rf /tmp/cf$$ 123456789abcde*
-: Initialize h_fcntl
-h_fcntl=false
+: determine where library module manual pages go
+set man3dir man3dir none
+eval $prefixit
+$cat <<EOM
-: Initialize h_sysfile
-h_sysfile=false
+$spackage has manual pages for many of the library modules.
+EOM
-: determine filename position in cpp output
-echo " "
-echo "Computing filename position in cpp output for #include directives..." >&4
-echo '#include <stdio.h>' > foo.c
-$cat >fieldn <<EOF
-$startsh
-$cppstdin $cppflags $cppminus <foo.c 2>/dev/null | \
-$grep '^[ ]*#.*stdio\.h' | \
-while read cline; do
- pos=1
- set \$cline
- while $test \$# -gt 0; do
- if $test -r \`echo \$1 | $tr -d '"'\`; then
- echo "\$pos"
- exit 0
- fi
- shift
- pos=\`expr \$pos + 1\`
- done
-done
-EOF
-chmod +x fieldn
-fieldn=`./fieldn`
-$rm -f foo.c fieldn
-case $fieldn in
-'') pos='???';;
-1) pos=first;;
-2) pos=second;;
-3) pos=third;;
-*) pos="${fieldn}th";;
+case "$nroff" in
+nroff)
+ $cat <<'EOM'
+However, you don't have nroff, so they're probably useless to you.
+You can use the supplied perldoc script instead.
+EOM
+ case "$man3dir" in
+ '') man3dir="none";;
+ esac;;
esac
-echo "Your cpp writes the filename in the $pos field of the line."
-: locate header file
-$cat >findhdr <<EOF
-$startsh
-wanted=\$1
-name=''
-if test -f $usrinc/\$wanted; then
- echo "$usrinc/\$wanted"
- exit 0
-fi
-awkprg='{ print \$$fieldn }'
-echo "#include <\$wanted>" > foo\$\$.c
-$cppstdin $cppminus $cppflags < foo\$\$.c 2>/dev/null | \
-$grep "^[ ]*#.*\$wanted" | \
-while read cline; do
- name=\`echo \$cline | $awk "\$awkprg" | $tr -d '"'\`
- case "\$name" in
- */\$wanted) echo "\$name"; exit 0;;
- *) name='';;
- esac;
-done;
-$rm -f foo\$\$.c;
-case "\$name" in
-'') exit 1;;
+case "$d_flexfnam" in
+undef)
+ $cat <<'EOM'
+However, your system can't handle the long file names like File::Basename.3.
+You can use the supplied perldoc script instead.
+EOM
+ case "$man3dir" in
+ '') man3dir="none";;
+ esac;;
esac
-EOF
-chmod +x findhdr
-: access call always available on UNIX
-set access d_access
-eval $inlibc
+echo "If you don't want the manual sources installed, answer 'none'."
+: We dont use /usr/local/man/man3 because some man programs will
+: only show the /usr/local/man/man3 contents, and not the system ones,
+: thus man less will show the perl module less.pm, but not the system
+: less command. We might also conflict with TCL man pages.
+: However, something like /opt/perl/man/man3 is fine.
+case "$man3dir" in
+'') case "$prefix" in
+ *perl*) dflt=`echo $man1dir |
+ $sed -e 's/man1/man3/g' -e 's/man\.1/man\.3/g'` ;;
+ *) dflt="$privlib/man/man3" ;;
+ esac
+ ;;
+' ') dflt=none;;
+*) dflt="$man3dir" ;;
+esac
+echo " "
-: locate the flags for 'access()'
-case "$d_access" in
-"$define")
- echo " "
- $cat >access.c <<'EOCP'
-#include <sys/types.h>
-#ifdef I_FCNTL
-#include <fcntl.h>
-#endif
-#ifdef I_SYS_FILE
-#include <sys/file.h>
-#endif
-#ifdef I_UNISTD
-#include <unistd.h>
-#endif
-main() {
- exit(R_OK);
-}
-EOCP
- : check sys/file.h first, no particular reason here
- if $test `./findhdr sys/file.h` && \
- $cc $cppflags -DI_SYS_FILE access.c -o access >/dev/null 2>&1 ; then
- h_sysfile=true;
- echo "<sys/file.h> defines the *_OK access constants." >&4
- elif $test `./findhdr fcntl.h` && \
- $cc $cppflags -DI_FCNTL access.c -o access >/dev/null 2>&1 ; then
- h_fcntl=true;
- echo "<fcntl.h> defines the *_OK access constants." >&4
- elif $test `./findhdr unistd.h` && \
- $cc $cppflags -DI_UNISTD access.c -o access >/dev/null 2>&1 ; then
- echo "<unistd.h> defines the *_OK access constants." >&4
- else
- echo "I can't find the four *_OK access constants--I'll use mine." >&4
- fi
- ;;
-esac
-$rm -f access*
-
-: see if alarm exists
-set alarm d_alarm
-eval $inlibc
-
-: determine the architecture name
-echo " "
-if xxx=`./loc arch blurfl $pth`; $test -f "$xxx"; then
- tarch=`arch`"-$osname"
-elif xxx=`./loc uname blurfl $pth`; $test -f "$xxx" ; then
- if uname -m > tmparch 2>&1 ; then
- tarch=`$sed -e 's/ /_/g' -e 's/$/'"-$osname/" tmparch`
- else
- tarch="$osname"
- fi
- $rm -f tmparch
-else
- tarch="$osname"
-fi
-case "$myarchname" in
-''|"$tarch") ;;
-*)
- echo "(Your architecture name used to be $myarchname.)"
- archname=''
- ;;
-esac
-case "$archname" in
-'') dflt="$tarch";;
-*) dflt="$archname";;
-esac
-rp='What is your architecture name'
-. ./myread
-archname="$ans"
-myarchname="$tarch"
-
-: is AFS running?
-echo " "
-if test -d /afs; then
- echo "AFS may be running... I'll be extra cautious then..." >&4
- afs=true
-else
- echo "AFS does not seem to be running..." >&4
- afs=false
+fn=dn+~
+rp="Where do the $spackage library man pages (source) go?"
+. ./getfile
+if test "X$man3direxp" != "X$ansexp"; then
+ installman3dir=''
fi
-: determine root of directory hierarchy where package will be installed.
-case "$prefix" in
-'')
- dflt=`./loc . /usr/local /usr/local /local /opt /usr`
- ;;
-*)
- dflt="$prefix"
- ;;
-esac
-$cat <<EOM
-
-By default, $package will be installed in $dflt/bin, manual
-pages under $dflt/man, etc..., i.e. with $dflt as prefix for
-all installation directories. Typically set to /usr/local, but you
-may choose /usr if you wish to install $package among your system
-binaries. If you wish to have binaries under /bin but manual pages
-under /usr/local/man, that's ok: you will be prompted separately
-for each of the installation directories, the prefix being only used
-to set the defaults.
-
-EOM
-fn=d~
-rp='Installation prefix to use?'
-. ./getfile
-oldprefix=''
-case "$prefix" in
-'') ;;
-*)
- case "$ans" in
- "$prefix") ;;
- *) oldprefix="$prefix";;
- esac
- ;;
+man3dir="$ans"
+man3direxp="$ansexp"
+case "$man3dir" in
+'') man3dir=' '
+ installman3dir='';;
esac
-prefix="$ans"
-prefixexp="$ansexp"
-
-: set the prefixit variable, to compute a suitable default value
-prefixit='case "$3" in
-""|none)
- case "$oldprefix" in
- "") eval "$1=\"\$$2\"";;
- *)
- case "$3" in
- "") eval "$1=";;
- none)
- eval "tp=\"\$$2\"";
- case "$tp" in
- ""|" ") eval "$1=\"\$$2\"";;
- *) eval "$1=";;
- esac;;
- esac;;
- esac;;
-*)
- eval "tp=\"$oldprefix-\$$2-\""; eval "tp=\"$tp\"";
- case "$tp" in
- --|/*--|\~*--) eval "$1=\"$prefix/$3\"";;
- /*-$oldprefix/*|\~*-$oldprefix/*)
- eval "$1=\`echo \$$2 | sed \"s,^$oldprefix,$prefix,\"\`";;
- *) eval "$1=\"\$$2\"";;
- esac;;
-esac'
-
-: determine where private executables go
-set dflt privlib lib/$package
-eval $prefixit
-$cat <<EOM
-
-There are some auxiliary files for $package that need to be put into a
-private library directory that is accessible by everyone.
-
-EOM
-fn=d~+
-rp='Pathname where the private library files will reside?'
-. ./getfile
-if $test "X$privlibexp" != "X$ansexp"; then
- installprivlib=''
-fi
-privlib="$ans"
-privlibexp="$ansexp"
if $afs; then
$cat <<EOM
Since you are running AFS, I need to distinguish the directory in which
-private files reside from the directory in which they are installed (and from
+manual pages reside from the directory in which they are installed (and from
which they are presumably copied to the former directory by occult means).
EOM
- case "$installprivlib" in
- '') dflt=`echo $privlibexp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installprivlib";;
+ case "$installman3dir" in
+ '') dflt=`echo $man3direxp | sed 's#^/afs/#/afs/.#'`;;
+ *) dflt="$installman3dir";;
esac
fn=de~
- rp='Where will private files be installed?'
+ rp='Where will man pages be installed?'
. ./getfile
- installprivlib="$ans"
+ installman3dir="$ans"
else
- installprivlib="$privlibexp"
+ installman3dir="$man3direxp"
fi
-: set the prefixup variable, to restore leading tilda escape
-prefixup='case "$prefixexp" in
-"$prefix") ;;
-*) eval "$1=\`echo \$$1 | sed \"s,^$prefixexp,$prefix,\"\`";;
-esac'
+: What suffix to use on installed man pages
-: determine where public architecture dependent libraries go
-set archlib archlib
-eval $prefixit
-case "$archlib" in
-'')
- case "$privlib" in
- '')
- dflt=`./loc . "." $prefixexp/lib /usr/local/lib /usr/lib /lib`
- set dflt
- eval $prefixup
+case "$man3dir" in
+' ')
+ man3ext='0'
+ ;;
+*)
+ rp="What suffix should be used for the $spackage library man pages?"
+ case "$man3ext" in
+ '') case "$man3dir" in
+ *3) dflt=3 ;;
+ *3p) dflt=3p ;;
+ *3pm) dflt=3pm ;;
+ *l) dflt=l;;
+ *n) dflt=n;;
+ *o) dflt=o;;
+ *p) dflt=p;;
+ *C) dflt=C;;
+ *L) dflt=L;;
+ *L3) dflt=L3;;
+ *) dflt=3;;
+ esac
;;
- *) dflt="$privlib/$archname";;
+ *) dflt="$man3ext";;
esac
+ . ./myread
+ man3ext="$ans"
;;
-*) dflt="$archlib";;
esac
-cat <<EOM
-$spackage contains architecture-dependent library files. If you are
-sharing libraries in a heterogeneous environment, you might store
-these files in a separate location. Otherwise, you can just include
-them with the rest of the public library files.
+: see what memory models we can support
+case "$models" in
+'')
+ $cat >pdp11.c <<'EOP'
+main() {
+#ifdef pdp11
+ exit(0);
+#else
+ exit(1);
+#endif
+}
+EOP
+ cc -o pdp11 pdp11.c >/dev/null 2>&1
+ if ./pdp11 2>/dev/null; then
+ dflt='unsplit split'
+ else
+ tans=`./loc . X /lib/small /lib/large /usr/lib/small /usr/lib/large /lib/medium /usr/lib/medium /lib/huge`
+ case "$tans" in
+ X) dflt='none';;
+ *) if $test -d /lib/small || $test -d /usr/lib/small; then
+ dflt='small'
+ else
+ dflt=''
+ fi
+ if $test -d /lib/medium || $test -d /usr/lib/medium; then
+ dflt="$dflt medium"
+ fi
+ if $test -d /lib/large || $test -d /usr/lib/large; then
+ dflt="$dflt large"
+ fi
+ if $test -d /lib/huge || $test -d /usr/lib/huge; then
+ dflt="$dflt huge"
+ fi
+ esac
+ fi;;
+*) dflt="$models";;
+esac
+$cat <<EOM
+
+Some systems have different model sizes. On most systems they are called
+small, medium, large, and huge. On the PDP11 they are called unsplit and
+split. If your system doesn't support different memory models, say "none".
+If you wish to force everything to one memory model, say "none" here and
+put the appropriate flags later when it asks you for other cc and ld flags.
+Venix systems may wish to put "none" and let the compiler figure things out.
+(In the following question multiple model names should be space separated.)
EOM
-fn=d~
-rp='Where do you want to put the public architecture-dependent libraries?'
-. ./getfile
-archlib="$ans"
-archlibexp="$ansexp"
-
-if $afs; then
- $cat <<EOM
-
-Since you are running AFS, I need to distinguish the directory in which
-private files reside from the directory in which they are installed (and from
-which they are presumably copied to the former directory by occult means).
+rp="Which memory models are supported?"
+. ./myread
+models="$ans"
-EOM
- case "$installarchlib" in
- '') dflt=`echo $archlibexp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installarchlib";;
- esac
- fn=de~
- rp='Where will architecture-dependent library files be installed?'
+case "$models" in
+none)
+ small=''
+ medium=''
+ large=''
+ huge=''
+ unsplit=''
+ split=''
+ ;;
+*split)
+ case "$split" in
+ '') if $contains '\-i' $sysman/ld.1 >/dev/null 2>&1 || \
+ $contains '\-i' $sysman/cc.1 >/dev/null 2>&1; then
+ dflt='-i'
+ else
+ dflt='none'
+ fi;;
+ *) dflt="$split";;
+ esac
+ rp="What flag indicates separate I and D space?"
+ . ./myread
+ tans="$ans"
+ case "$tans" in
+ none) tans='';;
+ esac
+ split="$tans"
+ unsplit='';;
+*large*|*small*|*medium*|*huge*)
+ case "$models" in
+ *large*)
+ case "$large" in
+ '') dflt='-Ml';;
+ *) dflt="$large";;
+ esac
+ rp="What flag indicates large model?"
+ . ./myread
+ tans="$ans"
+ case "$tans" in
+ none) tans='';
+ esac
+ large="$tans";;
+ *) large='';;
+ esac
+ case "$models" in
+ *huge*) case "$huge" in
+ '') dflt='-Mh';;
+ *) dflt="$huge";;
+ esac
+ rp="What flag indicates huge model?"
+ . ./myread
+ tans="$ans"
+ case "$tans" in
+ none) tans='';
+ esac
+ huge="$tans";;
+ *) huge="$large";;
+ esac
+ case "$models" in
+ *medium*) case "$medium" in
+ '') dflt='-Mm';;
+ *) dflt="$medium";;
+ esac
+ rp="What flag indicates medium model?"
+ . ./myread
+ tans="$ans"
+ case "$tans" in
+ none) tans='';
+ esac
+ medium="$tans";;
+ *) medium="$large";;
+ esac
+ case "$models" in
+ *small*) case "$small" in
+ '') dflt='none';;
+ *) dflt="$small";;
+ esac
+ rp="What flag indicates small model?"
+ . ./myread
+ tans="$ans"
+ case "$tans" in
+ none) tans='';
+ esac
+ small="$tans";;
+ *) small='';;
+ esac
+ ;;
+*)
+ echo "Unrecognized memory models--you may have to edit Makefile.SH" >&4
+ ;;
+esac
+
+: see if we need a special compiler
+echo " "
+if ./usg; then
+ case "$cc" in
+ '') case "$Mcc" in
+ /*) dflt='Mcc';;
+ *) case "$large" in
+ -M*) dflt='cc';;
+ *) if $contains '\-M' $sysman/cc.1 >/dev/null 2>&1 ; then
+ if $contains '\-M' $sysman/cpp.1 >/dev/null 2>&1; then
+ dflt='cc'
+ else
+ dflt='cc -M'
+ fi
+ else
+ dflt='cc'
+ fi;;
+ esac;;
+ esac;;
+ *) dflt="$cc";;
+ esac
+ $cat <<'EOM'
+On some systems the default C compiler will not resolve multiple global
+references that happen to have the same name. On some such systems the "Mcc"
+command may be used to force these to be resolved. On other systems a "cc -M"
+command is required. (Note that the -M flag on other systems indicates a
+memory model to use!) If you have the Gnu C compiler, you might wish to use
+that instead.
+
+EOM
+ rp="What command will force resolution on this system?"
+ . ./myread
+ cc="$ans"
+else
+ case "$cc" in
+ '') dflt=cc;;
+ *) dflt="$cc";;
+ esac
+ rp="Use which C compiler?"
+ . ./myread
+ cc="$ans"
+fi
+echo " "
+echo "Checking for GNU cc in disguise and/or its version number..." >&4
+$cat >gccvers.c <<EOM
+#include <stdio.h>
+int main() {
+#ifdef __GNUC__
+#ifdef __VERSION__
+ printf("%s\n", __VERSION__);
+#else
+ printf("%s\n", "1");
+#endif
+#endif
+ exit(0);
+}
+EOM
+if $cc -o gccvers gccvers.c >/dev/null 2>&1; then
+ gccversion=`./gccvers`
+ case "$gccversion" in
+ '') echo "You are not using GNU cc." ;;
+ *) echo "You are using GNU cc $gccversion." ;;
+ esac
+else
+ echo " "
+ echo "*** WHOA THERE!!! ***" >&4
+ echo " Your C compiler \"$cc\" doesn't seem to be working!" >&4
+ case "$knowitall" in
+ '')
+ echo " You'd better start hunting for one and let me know about it." >&4
+ exit 1
+ ;;
+ esac
+fi
+$rm -f gccvers*
+case "$gccversion" in
+1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
+esac
+
+: What should the include directory be ?
+echo " "
+$echo $n "Hmm... $c"
+dflt='/usr/include'
+incpath=''
+mips_type=''
+if $test -f /bin/mips && /bin/mips; then
+ echo "Looks like a MIPS system..."
+ $cat >usr.c <<'EOCP'
+#ifdef SYSTYPE_BSD43
+/bsd43
+#endif
+EOCP
+ if $cc -E usr.c > usr.out && $contains / usr.out >/dev/null 2>&1; then
+ dflt='/bsd43/usr/include'
+ incpath='/bsd43'
+ mips_type='BSD 4.3'
+ else
+ mips_type='System V'
+ fi
+ $rm -f usr.c usr.out
+ echo "and you're compiling with the $mips_type compiler and libraries."
+ xxx_prompt=y
+ echo "exit 0" >mips
+else
+ echo "Doesn't look like a MIPS system."
+ xxx_prompt=n
+ echo "exit 1" >mips
+fi
+chmod +x mips
+$eunicefix mips
+echo " "
+case "$usrinc" in
+'') ;;
+*) dflt="$usrinc";;
+esac
+case "$xxx_prompt" in
+y) fn=d/
+ rp='Where are the include files you want to use?'
. ./getfile
- installarchlib="$ans"
+ usrinc="$ans"
+ ;;
+*) usrinc="$dflt"
+ ;;
+esac
+
+: see if we have to deal with yellow pages, now NIS.
+if $test -d /usr/etc/yp || $test -d /etc/yp; then
+ if $test -f /usr/etc/nibindd; then
+ echo " "
+ echo "I'm fairly confident you're on a NeXT."
+ echo " "
+ rp='Do you get the hosts file via NetInfo?'
+ dflt=y
+ case "$hostcat" in
+ nidump*) ;;
+ '') ;;
+ *) dflt=n;;
+ esac
+ . ./myread
+ case "$ans" in
+ y*) hostcat='nidump hosts .';;
+ *) case "$hostcat" in
+ nidump*) hostcat='';;
+ esac
+ ;;
+ esac
+ fi
+ case "$hostcat" in
+ nidump*) ;;
+ *)
+ case "$hostcat" in
+ *ypcat*) dflt=y;;
+ '') if $contains '^\+' /etc/passwd >/dev/null 2>&1; then
+ dflt=y
+ else
+ dflt=n
+ fi;;
+ *) dflt=n;;
+ esac
+ echo " "
+ rp='Are you getting the hosts file via yellow pages?'
+ . ./myread
+ case "$ans" in
+ y*) hostcat='ypcat hosts';;
+ *) hostcat='cat /etc/hosts';;
+ esac
+ ;;
+ esac
+fi
+
+: now get the host name
+echo " "
+echo "Figuring out host name..." >&4
+case "$myhostname" in
+'') cont=true
+ echo 'Maybe "hostname" will work...'
+ if tans=`sh -c hostname 2>&1` ; then
+ myhostname=$tans
+ phostname=hostname
+ cont=''
+ fi
+ ;;
+*) cont='';;
+esac
+if $test "$cont"; then
+ if ./xenix; then
+ echo 'Oh, dear. Maybe "/etc/systemid" is the key...'
+ if tans=`cat /etc/systemid 2>&1` ; then
+ myhostname=$tans
+ phostname='cat /etc/systemid'
+ echo "Whadyaknow. Xenix always was a bit strange..."
+ cont=''
+ fi
+ elif $test -r /etc/systemid; then
+ echo "(What is a non-Xenix system doing with /etc/systemid?)"
+ fi
+fi
+if $test "$cont"; then
+ echo 'No, maybe "uuname -l" will work...'
+ if tans=`sh -c 'uuname -l' 2>&1` ; then
+ myhostname=$tans
+ phostname='uuname -l'
+ else
+ echo 'Strange. Maybe "uname -n" will work...'
+ if tans=`sh -c 'uname -n' 2>&1` ; then
+ myhostname=$tans
+ phostname='uname -n'
+ else
+ echo 'Oh well, maybe I can mine it out of whoami.h...'
+ if tans=`sh -c $contains' sysname $usrinc/whoami.h' 2>&1` ; then
+ myhostname=`echo "$tans" | $sed 's/^.*"\(.*\)"/\1/'`
+ phostname="sed -n -e '"'/sysname/s/^.*\"\\(.*\\)\"/\1/{'"' -e p -e q -e '}' <$usrinc/whoami.h"
+ else
+ case "$myhostname" in
+ '') echo "Does this machine have an identity crisis or something?"
+ phostname='';;
+ *)
+ echo "Well, you said $myhostname before..."
+ phostname='echo $myhostname';;
+ esac
+ fi
+ fi
+ fi
+fi
+: you do not want to know about this
+set $myhostname
+myhostname=$1
+
+: verify guess
+if $test "$myhostname" ; then
+ dflt=y
+ rp='Your host name appears to be "'$myhostname'".'" Right?"
+ . ./myread
+ case "$ans" in
+ y*) ;;
+ *) myhostname='';;
+ esac
+fi
+
+: bad guess or no guess
+while $test "X$myhostname" = X ; do
+ dflt=''
+ rp="Please type the (one word) name of your host:"
+ . ./myread
+ myhostname="$ans"
+done
+
+: translate upper to lower if necessary
+case "$myhostname" in
+*[A-Z]*)
+ echo "(Normalizing case in your host name)"
+ myhostname=`echo $myhostname | ./tr '[A-Z]' '[a-z]'`
+ ;;
+esac
+
+case "$myhostname" in
+*.*)
+ dflt=`expr "X$myhostname" : "X[^.]*\(\..*\)"`
+ myhostname=`expr "X$myhostname" : "X\([^.]*\)\."`
+ echo "(Trimming domain name from host name--host name is now $myhostname)"
+ ;;
+*) case "$mydomain" in
+ '')
+ {
+ : If we use NIS, try ypmatch.
+ : Is there some reason why this was not done before?
+ test "X$hostcat" = "Xypcat hosts" &&
+ ypmatch "$myhostname" hosts 2>/dev/null |\
+ $sed -e 's/[ ]*#.*//; s/$/ /' > hosts && \
+ $test -s hosts
+ } || {
+ : Extract only the relevant hosts, reducing file size,
+ : remove comments, insert trailing space for later use.
+ $hostcat | $sed -n -e "s/[ ]*#.*//; s/\$/ /
+ /[ ]$myhostname[ . ]/p" > hosts
+ }
+ tmp_re="[ . ]"
+ $test x`$awk "/[0-9].*[ ]$myhostname$tmp_re/ { sum++ }
+ END { print sum }" hosts` = x1 || tmp_re="[ ]"
+ dflt=.`$awk "/[0-9].*[ ]$myhostname$tmp_re/ {for(i=2; i<=NF;i++) print \\\$i}" \
+ hosts | $sort | $uniq | \
+ $sed -n -e "s/$myhostname\.\([-a-zA-Z0-9_.]\)/\1/p"`
+ case `$echo X$dflt` in
+ X*\ *) echo "(Several hosts in /etc/hosts matched hostname)"
+ dflt=.
+ ;;
+ .) echo "(You do not have fully-qualified names in /etc/hosts)"
+ ;;
+ esac
+ case "$dflt" in
+ .)
+ tans=`./loc resolv.conf X /etc /usr/etc`
+ if $test -f "$tans"; then
+ echo "(Attempting domain name extraction from $tans)"
+ : Why was there an Egrep here, when Sed works?
+ dflt=.`$sed -n -e 's/^domain[ ]*\(.*\)/\1/p' $tans \
+ | ./tr '[A-Z]' '[a-z]' 2>/dev/null`
+ fi
+ ;;
+ esac
+ case "$dflt" in
+ .) echo "(No help from resolv.conf either -- attempting clever guess)"
+ dflt=.`sh -c domainname 2>/dev/null`
+ case "$dflt" in
+ '') dflt='.';;
+ .nis.*|.yp.*|.main.*) dflt=`echo $dflt | $sed -e 's/^\.[^.]*//'`;;
+ esac
+ ;;
+ esac
+ case "$dflt" in
+ .) echo "(Lost all hope -- silly guess then)"
+ dflt='.uucp'
+ ;;
+ esac
+ $rm -f hosts
+ ;;
+ *) dflt="$mydomain";;
+ esac;;
+esac
+echo " "
+rp="What is your domain name?"
+. ./myread
+tans="$ans"
+case "$ans" in
+'') ;;
+.*) ;;
+*) tans=".$tans";;
+esac
+mydomain="$tans"
+
+: translate upper to lower if necessary
+case "$mydomain" in
+*[A-Z]*)
+ echo "(Normalizing case in your domain name)"
+ mydomain=`echo $mydomain | ./tr '[A-Z]' '[a-z]'`
+ ;;
+esac
+
+: a little sanity check here
+case "$phostname" in
+'') ;;
+*)
+ case `$phostname | ./tr '[A-Z]' '[a-z]'` in
+ $myhostname$mydomain|$myhostname) ;;
+ *)
+ case "$phostname" in
+ sed*)
+ echo "(That doesn't agree with your whoami.h file, by the way.)"
+ ;;
+ *)
+ echo "(That doesn't agree with your $phostname command, by the way.)"
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+esac
+
+$cat <<EOM
+
+I need to get your e-mail address in Internet format if possible, i.e.
+something like user@host.domain. Please answer accurately since I have
+no easy means to double check it. The default value provided below
+is most probably close to the reality but may not be valid from outside
+your organization...
+
+EOM
+cont=x
+while test "$cont"; do
+ case "$cf_email" in
+ '') dflt="$cf_by@$myhostname$mydomain";;
+ *) dflt="$cf_email";;
+ esac
+ rp='What is your e-mail address?'
+ . ./myread
+ cf_email="$ans"
+ case "$cf_email" in
+ *@*.*) cont='' ;;
+ *)
+ rp='Address does not look like an Internet one. Use it anyway?'
+ case "$fastread" in
+ yes) dflt=y ;;
+ *) dflt=n ;;
+ esac
+ . ./myread
+ case "$ans" in
+ y*) cont='' ;;
+ *) echo " " ;;
+ esac
+ ;;
+ esac
+done
+
+$cat <<EOM
+
+If you or somebody else will be maintaining perl at your site, please
+fill in the correct e-mail address here so that they may be contacted
+if necessary. Currently, the "perlbug" program included with perl
+will send mail to this address in addition to perlbug@perl.com. You may
+enter "none" for no administrator.
+
+EOM
+case "$perladmin" in
+'') dflt="$cf_email";;
+*) dflt="$perladmin";;
+esac
+rp='Perl administrator e-mail address'
+. ./myread
+perladmin="$ans"
+
+: determine where public executable scripts go
+set scriptdir scriptdir
+eval $prefixit
+case "$scriptdir" in
+'')
+ dflt="$bin"
+ : guess some guesses
+ $test -d /usr/share/scripts && dflt=/usr/share/scripts
+ $test -d /usr/share/bin && dflt=/usr/share/bin
+ $test -d /usr/local/script && dflt=/usr/local/script
+ $test -d $prefixexp/script && dflt=$prefixexp/script
+ set dflt
+ eval $prefixup
+ ;;
+*) dflt="$scriptdir"
+ ;;
+esac
+$cat <<EOM
+
+Some installations have a separate directory just for executable scripts so
+that they can mount it across multiple architectures but keep the scripts in
+one spot. You might, for example, have a subdirectory of /usr/share for this.
+Or you might just lump your scripts in with all your other executables.
+
+EOM
+fn=d~
+rp='Where do you keep publicly executable scripts?'
+. ./getfile
+if $test "X$ansexp" != "X$scriptdirexp"; then
+ installscript=''
+fi
+scriptdir="$ans"
+scriptdirexp="$ansexp"
+if $afs; then
+ $cat <<EOM
+
+Since you are running AFS, I need to distinguish the directory in which
+scripts reside from the directory in which they are installed (and from
+which they are presumably copied to the former directory by occult means).
+
+EOM
+ case "$installscript" in
+ '') dflt=`echo $scriptdirexp | sed 's#^/afs/#/afs/.#'`;;
+ *) dflt="$installscript";;
+ esac
+ fn=de~
+ rp='Where will public scripts be installed?'
+ . ./getfile
+ installscript="$ans"
+else
+ installscript="$scriptdirexp"
+fi
+
+: determine perl absolute location
+case "$perlpath" in
+'') perlpath=$binexp/perl ;;
+esac
+
+: figure out how to guarantee perl startup
+case "$startperl" in
+'')
+ case "$sharpbang" in
+ *!)
+ $cat <<EOH
+
+I can use the #! construct to start perl on your system. This will
+make startup of perl scripts faster, but may cause problems if you
+want to share those scripts and perl is not in a standard place
+($perlpath) on all your platforms. The alternative is to force
+a shell by starting the script with a single ':' character.
+
+EOH
+ dflt=$perlpath
+ rp='What shall I put after the #! to start up perl ("none" to not use #!)?'
+ . ./myread
+ case "$ans" in
+ none) startperl=": # use perl";;
+ *) startperl="#!$ans";;
+ esac
+ ;;
+ *) startperl=": # use perl"
+ ;;
+ esac
+ ;;
+esac
+echo "I'll use $startperl to start perl scripts."
+
+: see how we invoke the C preprocessor
+echo " "
+echo "Now, how can we feed standard input to your C preprocessor..." >&4
+cat <<'EOT' >testcpp.c
+#define ABC abc
+#define XYZ xyz
+ABC.XYZ
+EOT
+cd ..
+echo 'cat >.$$.c; '"$cc"' -E ${1+"$@"} .$$.c; rm .$$.c' >cppstdin
+chmod 755 cppstdin
+wrapper=`pwd`/cppstdin
+ok='false'
+cd UU
+
+if $test "X$cppstdin" != "X" && \
+ $cppstdin $cppminus <testcpp.c >testcpp.out 2>&1 && \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
+then
+ echo "You used to use $cppstdin $cppminus so we'll use that again."
+ case "$cpprun" in
+ '') echo "But let's see if we can live without a wrapper..." ;;
+ *)
+ if $cpprun $cpplast <testcpp.c >testcpp.out 2>&1 && \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
+ then
+ echo "(And we'll use $cpprun $cpplast to preprocess directly.)"
+ ok='true'
+ else
+ echo "(However, $cpprun $cpplast does not work, let's see...)"
+ fi
+ ;;
+ esac
+else
+ case "$cppstdin" in
+ '') ;;
+ *)
+ echo "Good old $cppstdin $cppminus does not seem to be of any help..."
+ ;;
+ esac
+fi
+
+if $ok; then
+ : nothing
+elif echo 'Maybe "'"$cc"' -E" will work...'; \
+ $cc -E <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "Yup, it does."
+ x_cpp="$cc -E"
+ x_minus='';
+elif echo 'Nope...maybe "'"$cc"' -E -" will work...'; \
+ $cc -E - <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "Yup, it does."
+ x_cpp="$cc -E"
+ x_minus='-';
+elif echo 'Nope...maybe "'"$cc"' -P" will work...'; \
+ $cc -P <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "Yipee, that works!"
+ x_cpp="$cc -P"
+ x_minus='';
+elif echo 'Nope...maybe "'"$cc"' -P -" will work...'; \
+ $cc -P - <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "At long last!"
+ x_cpp="$cc -P"
+ x_minus='-';
+elif echo 'No such luck, maybe "'$cpp'" will work...'; \
+ $cpp <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "It works!"
+ x_cpp="$cpp"
+ x_minus='';
+elif echo 'Nixed again...maybe "'$cpp' -" will work...'; \
+ $cpp - <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "Hooray, it works! I was beginning to wonder."
+ x_cpp="$cpp"
+ x_minus='-';
+elif echo 'Uh-uh. Time to get fancy. Trying a wrapper...'; \
+ $wrapper <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ x_cpp="$wrapper"
+ x_minus=''
+ echo "Eureka!"
+else
+ dflt=''
+ rp="No dice. I can't find a C preprocessor. Name one:"
+ . ./myread
+ x_cpp="$ans"
+ x_minus=''
+ $x_cpp <testcpp.c >testcpp.out 2>&1
+ if $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "OK, that will do." >&4
+ else
+echo "Sorry, I can't get that to work. Go find one and rerun Configure." >&4
+ exit 1
+ fi
+fi
+
+case "$ok" in
+false)
+ cppstdin="$x_cpp"
+ cppminus="$x_minus"
+ cpprun="$x_cpp"
+ cpplast="$x_minus"
+ set X $x_cpp
+ shift
+ case "$1" in
+ "$cpp")
+ echo "Perhaps can we force $cc -E using a wrapper..."
+ if $wrapper <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
+ then
+ echo "Yup, we can."
+ cppstdin="$wrapper"
+ cppminus='';
+ else
+ echo "Nope, we'll have to live without it..."
+ fi
+ ;;
+ esac
+ case "$cpprun" in
+ "$wrapper")
+ cpprun=''
+ cpplast=''
+ ;;
+ esac
+ ;;
+esac
+
+case "$cppstdin" in
+"$wrapper") ;;
+*) $rm -f $wrapper;;
+esac
+$rm -f testcpp.c testcpp.out
+
+: Set private lib path
+case "$plibpth" in
+'') if ./mips; then
+ plibpth="$incpath/usr/lib /usr/local/lib /usr/ccs/lib"
+ fi;;
+esac
+case "$libpth" in
+' ') dlist='';;
+'') dlist="$loclibpth $plibpth $glibpth";;
+*) dlist="$libpth";;
+esac
+
+: Now check and see which directories actually exist, avoiding duplicates
+libpth=''
+for xxx in $dlist
+do
+ if $test -d $xxx; then
+ case " $libpth " in
+ *" $xxx "*) ;;
+ *) libpth="$libpth $xxx";;
+ esac
+ fi
+done
+$cat <<'EOM'
+
+Some systems have incompatible or broken versions of libraries. Among
+the directories listed in the question below, please remove any you
+know not to be holding relevant libraries, and add any that are needed.
+Say "none" for none.
+
+EOM
+case "$libpth" in
+'') dflt='none';;
+*)
+ set X $libpth
+ shift
+ dflt=${1+"$@"}
+ ;;
+esac
+rp="Directories to use for library searches?"
+. ./myread
+case "$ans" in
+none) libpth=' ';;
+*) libpth="$ans";;
+esac
+
+: determine optimize, if desired, or use for debug flag also
+case "$optimize" in
+' ') dflt='none';;
+'') dflt='-O';;
+*) dflt="$optimize";;
+esac
+$cat <<EOH
+
+Some C compilers have problems with their optimizers, by default, $package
+compiles with the -O flag to use the optimizer. Alternately, you might want
+to use the symbolic debugger, which uses the -g flag (on traditional Unix
+systems). Either flag can be specified here. To use neither flag, specify
+the word "none".
+
+EOH
+rp="What optimizer/debugger flag should be used?"
+. ./myread
+optimize="$ans"
+case "$optimize" in
+'none') optimize=" ";;
+esac
+
+dflt=''
+: We will not override a previous value, but we might want to
+: augment a hint file
+case "$hint" in
+none|recommended)
+ case "$gccversion" in
+ 1*) dflt='-fpcc-struct-return' ;;
+ esac
+ case "$optimize" in
+ *-g*) dflt="$dflt -DDEBUGGING";;
+ esac
+ case "$gccversion" in
+ 2*) if test -d /etc/conf/kconfig.d &&
+ $contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
+ then
+ dflt="$dflt -posix"
+ fi
+ ;;
+ esac
+ ;;
+esac
+
+case "$mips_type" in
+*BSD*|'') inclwanted="$locincpth $usrinc";;
+*) inclwanted="$locincpth $inclwanted $usrinc/bsd";;
+esac
+for thisincl in $inclwanted; do
+ if $test -d $thisincl; then
+ if $test x$thisincl != x$usrinc; then
+ case "$dflt" in
+ *$thisincl*);;
+ *) dflt="$dflt -I$thisincl";;
+ esac
+ fi
+ fi
+done
+
+inctest='if $contains $2 $usrinc/$1 >/dev/null 2>&1; then
+ xxx=true;
+elif $contains $2 $usrinc/sys/$1 >/dev/null 2>&1; then
+ xxx=true;
+else
+ xxx=false;
+fi;
+if $xxx; then
+ case "$dflt" in
+ *$2*);;
+ *) dflt="$dflt -D$2";;
+ esac;
+fi'
+
+if ./osf1; then
+ set signal.h __LANGUAGE_C__; eval $inctest
+else
+ set signal.h LANGUAGE_C; eval $inctest
+fi
+set signal.h NO_PROTOTYPE; eval $inctest
+set signal.h _NO_PROTO; eval $inctest
+
+case "$hint" in
+none|recommended) dflt="$ccflags $dflt" ;;
+*) dflt="$ccflags";;
+esac
+
+case "$dflt" in
+''|' ') dflt=none;;
+esac
+$cat <<EOH
+
+Your C compiler may want other flags. For this question you should include
+-I/whatever and -DWHATEVER flags and any other flags used by the C compiler,
+but you should NOT include libraries or ld flags like -lwhatever. If you
+want $package to honor its debug switch, you should include -DDEBUGGING here.
+Your C compiler might also need additional flags, such as -D_POSIX_SOURCE,
+-DHIDEMYMALLOC or -DCRIPPLED_CC.
+
+To use no flags, specify the word "none".
+
+EOH
+set X $dflt
+shift
+dflt=${1+"$@"}
+rp="Any additional cc flags?"
+. ./myread
+case "$ans" in
+none) ccflags='';;
+*) ccflags="$ans";;
+esac
+
+: the following weeds options from ccflags that are of no interest to cpp
+cppflags="$ccflags"
+case "$gccversion" in
+1*) cppflags="$cppflags -D__GNUC__"
+esac
+case "$mips_type" in
+'');;
+*BSD*) cppflags="$cppflags -DSYSTYPE_BSD43";;
+esac
+case "$cppflags" in
+'');;
+*)
+ echo " "
+ echo "Let me guess what the preprocessor flags are..." >&4
+ set X $cppflags
+ shift
+ cppflags=''
+ $cat >cpp.c <<'EOM'
+#define BLURFL foo
+
+BLURFL xx LFRULB
+EOM
+ previous=''
+ for flag in $*
+ do
+ case "$flag" in
+ -*) ftry="$flag";;
+ *) ftry="$previous $flag";;
+ esac
+ if $cppstdin -DLFRULB=bar $ftry $cppminus <cpp.c \
+ >cpp1.out 2>/dev/null && \
+ $cpprun -DLFRULB=bar $ftry $cpplast <cpp.c \
+ >cpp2.out 2>/dev/null && \
+ $contains 'foo.*xx.*bar' cpp1.out >/dev/null 2>&1 && \
+ $contains 'foo.*xx.*bar' cpp2.out >/dev/null 2>&1
+ then
+ cppflags="$cppflags $ftry"
+ previous=''
+ else
+ previous="$flag"
+ fi
+ done
+ set X $cppflags
+ shift
+ cppflags=${1+"$@"}
+ case "$cppflags" in
+ *-*) echo "They appear to be: $cppflags";;
+ esac
+ $rm -f cpp.c cpp?.out
+ ;;
+esac
+
+: flags used in final linking phase
+
+case "$ldflags" in
+'') if ./venix; then
+ dflt='-i -z'
+ else
+ dflt=''
+ fi
+ case "$ccflags" in
+ *-posix*) dflt="$dflt -posix" ;;
+ esac
+ ;;
+*) dflt="$ldflags";;
+esac
+
+: Try to guess additional flags to pick up local libraries.
+for thislibdir in $libpth; do
+ case " $loclibpth " in
+ *" $thislibdir "*)
+ case "$dflt " in
+ *"-L$thislibdir "*) ;;
+ *) dflt="$dflt -L$thislibdir" ;;
+ esac
+ ;;
+ esac
+done
+
+case "$dflt" in
+'') dflt='none' ;;
+esac
+
+$cat <<EOH
+
+Your C linker may need flags. For this question you should
+include -L/whatever and any other flags used by the C linker, but you
+should NOT include libraries like -lwhatever.
+
+Make sure you include the appropriate -L/path flags if your C linker
+does not normally search all of the directories you specified above,
+namely
+ $libpth
+To use no flags, specify the word "none".
+
+EOH
+
+rp="Any additional ld flags (NOT including libraries)?"
+. ./myread
+case "$ans" in
+none) ldflags='';;
+*) ldflags="$ans";;
+esac
+rmlist="$rmlist pdp11"
+
+: coherency check
+echo " "
+echo "Checking your choice of C compiler and flags for coherency..." >&4
+set X $cc $optimize $ccflags $ldflags try.c -o try
+shift
+$cat >try.msg <<EOM
+I've tried to compile and run a simple program with:
+
+ $*
+ ./try
+
+and I got the following output:
+
+EOM
+$cat > try.c <<'EOF'
+#include <stdio.h>
+main() { exit(0); }
+EOF
+dflt=y
+if sh -c "$cc $optimize $ccflags try.c -o try $ldflags" >>try.msg 2>&1; then
+ if sh -c './try' >>try.msg 2>&1; then
+ dflt=n
+ else
+ echo "The program compiled OK, but exited with status $?." >>try.msg
+ rp="You have a problem. Shall I abort Configure"
+ dflt=y
+ fi
+else
+ echo "I can't compile the test program." >>try.msg
+ rp="You have a BIG problem. Shall I abort Configure"
+ dflt=y
+fi
+case "$dflt" in
+y)
+ $cat try.msg
+ case "$knowitall" in
+ '')
+ echo "(The supplied flags might be incorrect with this C compiler.)"
+ ;;
+ *) dflt=n;;
+ esac
+ echo " "
+ . ./myread
+ case "$ans" in
+ n*|N*) ;;
+ *) echo "Ok. Stopping Configure." >&4
+ exit 1
+ ;;
+ esac
+ ;;
+n) echo "OK, that should do.";;
+esac
+$rm -f try try.* core
+
+: compute shared library extension
+case "$so" in
+'')
+ if xxx=`./loc libc.sl X $libpth`; $test -f "$xxx"; then
+ dflt='sl'
+ else
+ dflt='so'
+ fi
+ ;;
+*) dflt="$so";;
+esac
+$cat <<EOM
+
+On some systems, shared libraries may be available. Answer 'none' if
+you want to suppress searching of shared libraries for the remaining
+of this configuration.
+
+EOM
+rp='What is the file extension used for shared libraries?'
+. ./myread
+so="$ans"
+
+: Looking for optional libraries
+echo " "
+echo "Checking for optional libraries..." >&4
+case "$libs" in
+' '|'') dflt='';;
+*) dflt="$libs";;
+esac
+case "$libswanted" in
+'') libswanted='c_s';;
+esac
+for thislib in $libswanted; do
+
+ if xxx=`./loc lib$thislib.$so.[0-9]'*' X $libpth`; $test -f "$xxx"; then
+ echo "Found -l$thislib (shared)."
+ case " $dflt " in
+ *"-l$thislib "*);;
+ *) dflt="$dflt -l$thislib";;
+ esac
+ elif xxx=`./loc lib$thislib.$so X $libpth` ; $test -f "$xxx"; then
+ echo "Found -l$thislib (shared)."
+ case " $dflt " in
+ *"-l$thislib "*);;
+ *) dflt="$dflt -l$thislib";;
+ esac
+ elif xxx=`./loc lib$thislib.a X $libpth`; $test -f "$xxx"; then
+ echo "Found -l$thislib."
+ case " $dflt " in
+ *"-l$thislib "*);;
+ *) dflt="$dflt -l$thislib";;
+ esac
+ elif xxx=`./loc $thislib.a X $libpth`; $test -f "$xxx"; then
+ echo "Found -l$thislib."
+ case " $dflt " in
+ *"-l$thislib "*);;
+ *) dflt="$dflt -l$thislib";;
+ esac
+ elif xxx=`./loc lib${thislib}_s.a X $libpth`; $test -f "$xxx"; then
+ echo "Found -l${thislib}_s."
+ case " $dflt " in
+ *"-l$thislib "*);;
+ *) dflt="$dflt -l${thislib}_s";;
+ esac
+ elif xxx=`./loc Slib$thislib.a X $xlibpth`; $test -f "$xxx"; then
+ echo "Found -l$thislib."
+ case " $dflt " in
+ *"-l$thislib "*);;
+ *) dflt="$dflt -l$thislib";;
+ esac
+ else
+ echo "No -l$thislib."
+ fi
+done
+set X $dflt
+shift
+dflt="$*"
+case "$libs" in
+'') dflt="$dflt";;
+*) dflt="$libs";;
+esac
+case "$dflt" in
+' '|'') dflt='none';;
+esac
+
+$cat <<EOM
+
+Some versions of Unix support shared libraries, which make executables smaller
+but make load time slightly longer.
+
+On some systems, mostly newer Unix System V's, the shared library is included
+by putting the option "-lc_s" as the last thing on the cc command line when
+linking. Other systems use shared libraries by default. There may be other
+libraries needed to compile $package on your machine as well. If your system
+needs the "-lc_s" option, include it here. Include any other special libraries
+here as well. Say "none" for none.
+EOM
+
+echo " "
+rp="Any additional libraries?"
+. ./myread
+case "$ans" in
+none) libs=' ';;
+*) libs="$ans";;
+esac
+
+: see if nm is to be used to determine whether a symbol is defined or not
+case "$usenm" in
+'')
+ dflt=`egrep 'inlibc|csym' ../Configure | wc -l 2>/dev/null`
+ if $test $dflt -gt 20; then
+ dflt=y
+ else
+ dflt=n
+ fi
+ ;;
+*)
+ case "$usenm" in
+ true) dflt=y;;
+ *) dflt=n;;
+ esac
+ ;;
+esac
+$cat <<EOM
+
+I can use 'nm' to extract the symbols from your C libraries. This is a time
+consuming task which may generate huge output on the disk (up to 3 megabytes)
+but that should make the symbols extraction faster. The alternative is to skip
+the 'nm' extraction part and to compile a small test program instead to
+determine whether each symbol is present. If you have a fast C compiler and/or
+if your 'nm' output cannot be parsed, this may be the best solution.
+
+EOM
+rp='Shall I use nm to extract C symbols from the libraries?'
+. ./myread
+case "$ans" in
+n|N) usenm=false;;
+*) usenm=true;;
+esac
+
+runnm=$usenm
+case "$reuseval" in
+true) runnm=false;;
+esac
+
+: nm options which may be necessary
+case "$nm_opt" in
+'') if $test -f /mach_boot; then
+ nm_opt=''
+ elif $test -d /usr/ccs/lib; then
+ nm_opt='-p'
+ elif $test -f /dgux; then
+ nm_opt='-p'
+ else
+ nm_opt=''
+ fi;;
+esac
+
+: nm options which may be necessary for shared libraries but illegal
+: for archive libraries. Thank you, Linux.
+case "$nm_so_opt" in
+'') case "$myuname" in
+ *linux*)
+ if nm --help | $grep 'dynamic' > /dev/null 2>&1; then
+ nm_so_opt='--dynamic'
+ fi
+ ;;
+ esac
+ ;;
+esac
+
+case "$runnm" in
+true)
+: get list of predefined functions in a handy place
+echo " "
+case "$libc" in
+'') libc=unknown
+ case "$libs" in
+ *-lc_s*) libc=`./loc libc_s.a $libc $libpth`
+ esac
+ ;;
+esac
+libnames='';
+case "$libs" in
+'') ;;
+*) for thislib in $libs; do
+ case "$thislib" in
+ -lc|-lc_s)
+ : Handle C library specially below.
+ ;;
+ -l*)
+ thislib=`echo $thislib | $sed -e 's/^-l//'`
+ if try=`./loc lib$thislib.$so.'*' X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc lib$thislib.$so X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc lib$thislib.a X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc lib$thislib X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc $thislib X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc Slib$thislib.a X $xlibpth`; $test -f "$try"; then
+ :
+ else
+ try=''
+ fi
+ libnames="$libnames $try"
+ ;;
+ *) libnames="$libnames $thislib" ;;
+ esac
+ done
+ ;;
+esac
+xxx=normal
+case "$libc" in
+unknown)
+ set /lib/libc.$so
+ for xxx in $libpth; do
+ $test -r $1 || set $xxx/libc.$so
+ : The messy sed command sorts on library version numbers.
+ $test -r $1 || \
+ set `echo blurfl; echo $xxx/libc.$so.[0-9]* | \
+ tr ' ' '\012' | egrep -v '\.[A-Za-z]*$' | $sed -e '
+ h
+ s/[0-9][0-9]*/0000&/g
+ s/0*\([0-9][0-9][0-9][0-9][0-9]\)/\1/g
+ G
+ s/\n/ /' | \
+ sort | $sed -e 's/^.* //'`
+ eval set \$$#
+ done
+ $test -r $1 || set /usr/ccs/lib/libc.$so
+ $test -r $1 || set /lib/libsys_s.a
+ ;;
+*)
+ set blurfl
+ ;;
+esac
+if $test -r "$1"; then
+ echo "Your (shared) C library seems to be in $1."
+ libc="$1"
+elif $test -r /lib/libc && $test -r /lib/clib; then
+ echo "Your C library seems to be in both /lib/clib and /lib/libc."
+ xxx=apollo
+ libc='/lib/clib /lib/libc'
+ if $test -r /lib/syslib; then
+ echo "(Your math library is in /lib/syslib.)"
+ libc="$libc /lib/syslib"
+ fi
+elif $test -r "$libc" || (test -h "$libc") >/dev/null 2>&1; then
+ echo "Your C library seems to be in $libc, as you said before."
+elif $test -r $incpath/usr/lib/libc.a; then
+ libc=$incpath/usr/lib/libc.a;
+ echo "Your C library seems to be in $libc. That's fine."
+elif $test -r /lib/libc.a; then
+ libc=/lib/libc.a;
+ echo "Your C library seems to be in $libc. You're normal."
else
- installarchlib="$archlibexp"
+ if tans=`./loc libc.a blurfl/dyick $libpth`; $test -r "$tans"; then
+ :
+ elif tans=`./loc libc blurfl/dyick $libpth`; $test -r "$tans"; then
+ libnames="$libnames "`./loc clib blurfl/dyick $libpth`
+ elif tans=`./loc clib blurfl/dyick $libpth`; $test -r "$tans"; then
+ :
+ elif tans=`./loc Slibc.a blurfl/dyick $xlibpth`; $test -r "$tans"; then
+ :
+ elif tans=`./loc Mlibc.a blurfl/dyick $xlibpth`; $test -r "$tans"; then
+ :
+ else
+ tans=`./loc Llibc.a blurfl/dyick $xlibpth`
+ fi
+ if $test -r "$tans"; then
+ echo "Your C library seems to be in $tans, of all places."
+ libc=$tans
+ else
+ libc='blurfl'
+ fi
+fi
+if $test $xxx = apollo -o -r "$libc" || (test -h "$libc") >/dev/null 2>&1; then
+ dflt="$libc"
+ cat <<EOM
+
+If the guess above is wrong (which it might be if you're using a strange
+compiler, or your machine supports multiple models), you can override it here.
+
+EOM
+else
+ dflt=''
+ echo $libpth | tr ' ' '\012' | sort | uniq > libpath
+ cat >&4 <<EOM
+I can't seem to find your C library. I've looked in the following places:
+
+EOM
+ $sed 's/^/ /' libpath
+ cat <<EOM
+
+None of these seems to contain your C library. I need to get its name...
+
+EOM
+fi
+fn=f
+rp='Where is your C library?'
+. ./getfile
+libc="$ans"
+
+echo " "
+echo $libc $libnames | tr ' ' '\012' | sort | uniq > libnames
+set X `cat libnames`
+shift
+xxx=files
+case $# in 1) xxx=file; esac
+echo "Extracting names from the following $xxx for later perusal:" >&4
+echo " "
+$sed 's/^/ /' libnames >&4
+echo " "
+$echo $n "This may take a while...$c" >&4
+
+: Linux may need the special Dynamic option to nm for shared libraries.
+: In general, this is stored in the nm_so_opt variable.
+: Unfortunately, that option may be fatal on non-shared libraries.
+for nm_libs_ext in $*; do
+ case $nm_libs_ext in
+ *$so*) nm $nm_so_opt $nm_opt $nm_libs_ext 2>/dev/null ;;
+ *) nm $nm_opt $nm_libs_ext 2>/dev/null ;;
+ esac
+done > libc.tmp
+
+$echo $n ".$c"
+$grep fprintf libc.tmp > libc.ptf
+xscan='eval "<libc.ptf $com >libc.list"; $echo $n ".$c" >&4'
+xrun='eval "<libc.tmp $com >libc.list"; echo "done" >&4'
+xxx='[ADTSIW]'
+if com="$sed -n -e 's/__IO//' -e 's/^.* $xxx *_[_.]*//p' -e 's/^.* $xxx //p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^__*//' -e 's/^\([a-zA-Z_0-9$]*\).*xtern.*/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e '/|UNDEF/d' -e '/FUNC..GL/s/^.*|__*//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^.* D __*//p' -e 's/^.* D //p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^_//' -e 's/^\([a-zA-Z_0-9]*\).*xtern.*text.*/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^.*|FUNC |GLOB .*|//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$grep '|' | $sed -n -e '/|COMMON/d' -e '/|DATA/d' \
+ -e '/ file/d' -e 's/^\([^ ]*\).*/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^.*|FUNC |GLOB .*|//p' -e 's/^.*|FUNC |WEAK .*|//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^__//' -e '/|Undef/d' -e '/|Proc/s/ .*//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e '/Def. Text/s/.* \([^ ]*\)\$/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^[-0-9a-f ]*_\(.*\)=.*/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+else
+ nm -p $* 2>/dev/null >libc.tmp
+ $grep fprintf libc.tmp > libc.ptf
+ if com="$sed -n -e 's/^.* [ADTSIW] *_[_.]*//p' -e 's/^.* [ADTSIW] //p'";\
+ eval $xscan; $contains '^fprintf$' libc.list >/dev/null 2>&1
+ then
+ nm_opt='-p'
+ eval $xrun
+ else
+ echo " "
+ echo "nm didn't seem to work right. Trying ar instead..." >&4
+ com=''
+ if ar t $libc > libc.tmp; then
+ for thisname in $libnames; do
+ ar t $thisname >>libc.tmp
+ done
+ $sed -e 's/\.o$//' < libc.tmp > libc.list
+ echo "Ok." >&4
+ else
+ echo "ar didn't seem to work right." >&4
+ echo "Maybe this is a Cray...trying bld instead..." >&4
+ if bld t $libc | $sed -e 's/.*\///' -e 's/\.o:.*$//' > libc.list
+ then
+ for thisname in $libnames; do
+ bld t $libnames | \
+ $sed -e 's/.*\///' -e 's/\.o:.*$//' >>libc.list
+ ar t $thisname >>libc.tmp
+ done
+ echo "Ok." >&4
+ else
+ echo "That didn't work either. Giving up." >&4
+ exit 1
+ fi
+ fi
+ fi
fi
-if $test X"$archlib" = X"$privlib"; then
- d_archlib="$undef"
-else
- d_archlib="$define"
+nm_extract="$com"
+if $test -f /lib/syscalls.exp; then
+ echo " "
+ echo "Also extracting names from /lib/syscalls.exp for good ole AIX..." >&4
+ $sed -n 's/^\([^ ]*\)[ ]*syscall$/\1/p' /lib/syscalls.exp >>libc.list
fi
+;;
+esac
+$rm -f libnames libpath
-: function used to set $1 to $val
-setvar='var=$1; eval "was=\$$1"; td=$define; tu=$undef;
-case "$val$was" in
-$define$undef) . ./whoa; eval "$var=\$td";;
-$undef$define) . ./whoa; eval "$var=\$tu";;
-*) eval "$var=$val";;
+: is a C symbol defined?
+csym='tlook=$1;
+case "$3" in
+-v) tf=libc.tmp; tc=""; tdc="";;
+-a) tf=libc.tmp; tc="[0]"; tdc="[]";;
+*) tlook="^$1\$"; tf=libc.list; tc="()"; tdc="()";;
+esac;
+tx=yes;
+case "$reuseval-$4" in
+true-) ;;
+true-*) tx=no; eval "tval=\$$4"; case "$tval" in "") tx=yes;; esac;;
+esac;
+case "$tx" in
+yes)
+ case "$runnm" in
+ true)
+ if $contains $tlook $tf >/dev/null 2>&1;
+ then tval=true;
+ else tval=false;
+ fi;;
+ *)
+ echo "main() { extern short $1$tdc; printf(\"%hd\", $1$tc); }" > t.c;
+ if $cc $ccflags $ldflags -o t t.c $libs >/dev/null 2>&1;
+ then tval=true;
+ else tval=false;
+ fi;
+ $rm -f t t.c;;
+ esac;;
+*)
+ case "$tval" in
+ $define) tval=true;;
+ *) tval=false;;
+ esac;;
+esac;
+eval "$2=$tval"'
+
+: define an is-in-libc? function
+inlibc='echo " "; td=$define; tu=$undef;
+sym=$1; var=$2; eval "was=\$$2";
+tx=yes;
+case "$reuseval$was" in
+true) ;;
+true*) tx=no;;
+esac;
+case "$tx" in
+yes)
+ set $sym tres -f;
+ eval $csym;
+ case "$tres" in
+ true)
+ echo "$sym() found." >&4;
+ case "$was" in $undef) . ./whoa; esac; eval "$var=\$td";;
+ *)
+ echo "$sym() NOT found." >&4;
+ case "$was" in $define) . ./whoa; esac; eval "$var=\$tu";;
+ esac;;
+*)
+ case "$was" in
+ $define) echo "$sym() found." >&4;;
+ *) echo "$sym() NOT found." >&4;;
+ esac;;
esac'
+: Check how to convert floats to strings.
+echo " "
+echo "Checking for an efficient way to convert floats to strings."
+$cat >try.c <<'EOP'
+#ifdef TRY_gconvert
+#define Gconvert(x,n,t,b) gconvert((x),(n),(t),(b))
+#endif
+#ifdef TRY_gcvt
+#define Gconvert(x,n,t,b) gcvt((x),(n),(b))
+#endif
+#ifdef TRY_sprintf
+#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
+#endif
+main() {
+ char buf[64];
+ Gconvert(1.0, 8, 0, buf);
+ if (buf[0] != '1' || buf[1] != '\0')
+ exit(1);
+ Gconvert(0.0, 8, 0, buf);
+ if (buf[0] != '0' || buf[1] != '\0')
+ exit(1);
+ Gconvert(-1.0, 8, 0, buf);
+ if (buf[0] != '-' || buf[1] != '1' || buf[2] != '\0')
+ exit(1);
+ exit(0);
+}
+EOP
+case "$d_Gconvert" in
+gconvert*) xxx_list='gconvert gcvt sprintf' ;;
+gcvt*) xxx_list='gcvt gconvert sprintf' ;;
+sprintf*) xxx_list='sprintf gconvert gcvt' ;;
+*) xxx_list='gconvert gcvt sprintf' ;;
+esac
+
+for xxx_convert in $xxx_list; do
+ echo "Trying $xxx_convert"
+ $rm -f try try.o
+ if $cc $ccflags -DTRY_$xxx_convert $ldflags -o try \
+ try.c $libs > /dev/null 2>&1 ; then
+ echo "$xxx_convert" found. >&4
+ if ./try; then
+ echo "Good, $xxx_convert drops a trailing decimal point."
+ echo "I'll use $xxx_convert to convert floats into a string." >&4
+ break;
+ else
+ echo "But $xxx_convert keeps a trailing decimal point".
+ fi
+ else
+ echo "$xxx_convert NOT found." >&4
+ fi
+done
+
+case "$xxx_convert" in
+gconvert) d_Gconvert='gconvert((x),(n),(t),(b))' ;;
+gcvt) d_Gconvert='gcvt((x),(n),(b))' ;;
+*) d_Gconvert='sprintf((b),"%.*g",(n),(x))' ;;
+esac
+
+: Initialize h_fcntl
+h_fcntl=false
+
+: Initialize h_sysfile
+h_sysfile=false
+
+: determine filename position in cpp output
+echo " "
+echo "Computing filename position in cpp output for #include directives..." >&4
+echo '#include <stdio.h>' > foo.c
+$cat >fieldn <<EOF
+$startsh
+$cppstdin $cppflags $cppminus <foo.c 2>/dev/null | \
+$grep '^[ ]*#.*stdio\.h' | \
+while read cline; do
+ pos=1
+ set \$cline
+ while $test \$# -gt 0; do
+ if $test -r \`echo \$1 | $tr -d '"'\`; then
+ echo "\$pos"
+ exit 0
+ fi
+ shift
+ pos=\`expr \$pos + 1\`
+ done
+done
+EOF
+chmod +x fieldn
+fieldn=`./fieldn`
+$rm -f foo.c fieldn
+case $fieldn in
+'') pos='???';;
+1) pos=first;;
+2) pos=second;;
+3) pos=third;;
+*) pos="${fieldn}th";;
+esac
+echo "Your cpp writes the filename in the $pos field of the line."
+
+: locate header file
+$cat >findhdr <<EOF
+$startsh
+wanted=\$1
+name=''
+if test -f $usrinc/\$wanted; then
+ echo "$usrinc/\$wanted"
+ exit 0
+fi
+awkprg='{ print \$$fieldn }'
+echo "#include <\$wanted>" > foo\$\$.c
+$cppstdin $cppminus $cppflags < foo\$\$.c 2>/dev/null | \
+$grep "^[ ]*#.*\$wanted" | \
+while read cline; do
+ name=\`echo \$cline | $awk "\$awkprg" | $tr -d '"'\`
+ case "\$name" in
+ */\$wanted) echo "\$name"; exit 0;;
+ *) name='';;
+ esac;
+done;
+$rm -f foo\$\$.c;
+case "\$name" in
+'') exit 1;;
+esac
+EOF
+chmod +x findhdr
+
+: access call always available on UNIX
+set access d_access
+eval $inlibc
+
+: locate the flags for 'access()'
+case "$d_access" in
+"$define")
+ echo " "
+ $cat >access.c <<'EOCP'
+#include <sys/types.h>
+#ifdef I_FCNTL
+#include <fcntl.h>
+#endif
+#ifdef I_SYS_FILE
+#include <sys/file.h>
+#endif
+#ifdef I_UNISTD
+#include <unistd.h>
+#endif
+main() {
+ exit(R_OK);
+}
+EOCP
+ : check sys/file.h first, no particular reason here
+ if $test `./findhdr sys/file.h` && \
+ $cc $cppflags -DI_SYS_FILE access.c -o access >/dev/null 2>&1 ; then
+ h_sysfile=true;
+ echo "<sys/file.h> defines the *_OK access constants." >&4
+ elif $test `./findhdr fcntl.h` && \
+ $cc $cppflags -DI_FCNTL access.c -o access >/dev/null 2>&1 ; then
+ h_fcntl=true;
+ echo "<fcntl.h> defines the *_OK access constants." >&4
+ elif $test `./findhdr unistd.h` && \
+ $cc $cppflags -DI_UNISTD access.c -o access >/dev/null 2>&1 ; then
+ echo "<unistd.h> defines the *_OK access constants." >&4
+ else
+ echo "I can't find the four *_OK access constants--I'll use mine." >&4
+ fi
+ ;;
+esac
+$rm -f access*
+
+: see if alarm exists
+set alarm d_alarm
+eval $inlibc
+
: Look for GNU-cc style attribute checking
echo " "
echo "Checking whether your compiler can handle __attribute__ ..." >&4
exit(0);
}
EOP
- if $cc $ccflags -o set set.c $ldflags $libs >/dev/null 2>&1; then
+ if $cc $ccflags $ldflags -o set set.c $libs >/dev/null 2>&1; then
./set 2>/dev/null
case $? in
0) echo "You have to use setpgrp() instead of setpgrp(pid, pgrp)." >&4
eval $setvar
$rm -f set set.c
-: Check if we really have byacc
-case "$byacc" in
-''|'byacc') val="$undef" ;;
-*) val="$define" ;;
-esac
-set d_byacc
-eval $setvar
-
: see if bzero exists
set bzero d_bzero
eval $inlibc
main()
{
printf("%d\n", sizeof(int));
+ exit(0);
}
EOCP
- if $cc $ccflags try.c -o try >/dev/null 2>&1 ; then
- dflt=`./try`
+ if $cc $ccflags try.c -o try >/dev/null 2>&1 && ./try > /dev/null; then
+ intsize=`./try`
+ echo "Your integers are $intsize bytes long."
else
dflt='4'
echo "(I can't seem to compile the test program. Guessing...)"
+ rp="What is the size of an integer (in bytes)?"
+ . ./myread
+ intsize="$ans"
fi
;;
-*)
- dflt="$intsize"
- ;;
esac
-rp="What is the size of an integer (in bytes)?"
-. ./myread
-intsize="$ans"
$rm -f try.c try
: see if signal is declared as pointer to function returning int or void
$cat >try.c <<EOCP
#include <sys/types.h>
#include <signal.h>
-$signal_t blech() { exit(3); }
+$signal_t blech() { exit(7); }
+$signal_t blech_in_list() { exit(4); }
+unsigned long dummy_long(p) unsigned long p; { return p; }
+unsigned int dummy_int(p) unsigned int p; { return p; }
+unsigned short dummy_short(p) unsigned short p; { return p; }
main()
{
- double f = -123;
+ double f = -123.;
unsigned long along;
unsigned int aint;
unsigned short ashort;
along = (unsigned long)f;
if (along != 0x80000001)
result |= 2;
+ if (result)
+ exit(result);
+ signal(SIGFPE, blech_in_list);
+ f = 123.;
+ along = dummy_long((unsigned long)f);
+ aint = dummy_int((unsigned int)f);
+ ashort = dummy_short((unsigned short)f);
+ if (along != (unsigned long)123)
+ result |= 4;
+ if (aint != (unsigned int)123)
+ result |= 4;
+ if (ashort != (unsigned short)123)
+ result |= 4;
exit(result);
}
castflags=$?
else
echo "(I can't seem to compile the test program--assuming it can't)"
- castflags=3
+ castflags=7
fi
case "$castflags" in
0) val="$define"
$rm -f try.c
: see if dlerror exists
+xxx_runnm="$runnm"
+runnm=false
set dlerror d_dlerror
eval $inlibc
+runnm="$xxx_runnm"
: see if dld is available
set dld.h i_dld
eval $inhdr
: see if dlopen exists
+xxx_runnm="$runnm"
+runnm=false
set dlopen d_dlopen
eval $inlibc
+runnm="$xxx_runnm"
: determine which dynamic loading, if any, to compile in
echo " "
usedl="$define"
: emulate basename
dlsrc=`echo $ans | $sed -e 's@.*/\([^/]*\)$@\1@'`
+
$cat << EOM
Some systems may require passing special flags to $cc -c to
EOM
case "$cccdlflags" in
- ''|' ') case "$cc" in
- *gcc*) dflt='-fpic' ;;
- *) case "$osname" in
+ '') case "$gccversion" in
+ '') case "$osname" in
hpux) dflt='+z' ;;
next) dflt='none' ;;
- solaris) dflt='-K pic' ;;
+ solaris|svr4*|esix*) dflt='-Kpic' ;;
sunos) dflt='-pic' ;;
- svr4*|esix*) dflt='-Kpic' ;;
*) dflt='none' ;;
esac ;;
+ *) dflt='-fpic' ;;
esac ;;
- *) dflt="$cccdlflags" ;;
+ *) dflt="$cccdlflags" ;;
esac
rp="Any special flags to pass to $cc -c to compile shared library modules?"
. ./myread
case "$ans" in
- none) cccdlflags='' ;;
+ none) cccdlflags=' ' ;;
*) cccdlflags="$ans" ;;
esac
- cat << 'EOM'
+ cat << EOM
+
+Some systems use ld to create libraries that can be dynamically loaded,
+while other systems (such as those using ELF) use $cc.
+
+EOM
+ case "$ld" in
+ '') $cat >try.c <<'EOM'
+/* Test for whether ELF binaries are produced */
+#include <fcntl.h>
+#include <stdlib.h>
+main() {
+ char b[4];
+ int i = open("a.out",O_RDONLY);
+ if(i == -1)
+ exit(1); /* fail */
+ if(read(i,b,4)==4 && b[0]==127 && b[1]=='E' && b[2]=='L' && b[3]=='F')
+ exit(0); /* succeed (yes, it's ELF) */
+ else
+ exit(1); /* fail */
+}
+EOM
+ if $cc $ccflags try.c >/dev/null 2>&1 && ./a.out; then
+ cat <<EOM
+You appear to have ELF support. I'll use $cc to build dynamic libraries.
+EOM
+ dflt="$cc"
+ else
+ echo "I'll use ld to build dynamic libraries."
+ dflt='ld'
+ fi
+ rm -f try.c a.out
+ ;;
+ *) dflt="$ld"
+ ;;
+ esac
+
+ rp="What command should be used to create dynamic libraries?"
+ . ./myread
+ ld="$ans"
+
+ cat << EOM
-Some systems may require passing special flags to ld to create a
+Some systems may require passing special flags to $ld to create a
library that can be dynamically loaded. If your ld flags include
-L/other/path options to locate libraries outside your loader's normal
search path, you may need to specify those -L options here as well. To
EOM
case "$lddlflags" in
- ''|' ') case "$osname" in
+ '') case "$osname" in
hpux) dflt='-b' ;;
+ linux) dflt='-shared' ;;
next) dflt='none' ;;
solaris) dflt='-G' ;;
sunos) dflt='-assert nodefinitions' ;;
;;
*) dflt="$lddlflags" ;;
esac
- rp="Any special flags to pass to ld to create a dynamically loaded library?"
+
+: Try to guess additional flags to pick up local libraries.
+for thisflag in $ldflags; do
+ case "$thisflag" in
+ -L*)
+ case " $dflt " in
+ *" $thisflag "*) ;;
+ *) dflt="$dflt $thisflag" ;;
+ esac
+ ;;
+ esac
+done
+
+case "$dflt" in
+'') dflt='none' ;;
+esac
+
+ rp="Any special flags to pass to $ld to create a dynamically loaded library?"
. ./myread
case "$ans" in
- none) lddlflags='' ;;
+ none) lddlflags=' ' ;;
*) lddlflags="$ans" ;;
esac
EOM
case "$ccdlflags" in
- ''|' ') case "$osname" in
- hpux) dflt='none' ;;
+ '') case "$osname" in
+ hpux) dflt='-Wl,-E' ;;
+ linux) dflt='-rdynamic' ;;
next) dflt='none' ;;
sunos) dflt='none' ;;
*) dflt='none' ;;
rp="Any special flags to pass to $cc to use dynamic loading?"
. ./myread
case "$ans" in
- none) ccdlflags='' ;;
+ none) ccdlflags=' ' ;;
*) ccdlflags="$ans" ;;
esac
;;
*) usedl="$undef"
+ ld='ld'
dlsrc='dl_none.xs'
lddlflags=''
ccdlflags=''
}
EOM
if $cc $ccflags $cccdlflags -c dyna.c > /dev/null 2>&1 &&
- ld $lddlflags -o dyna.$dlext dyna.o > /dev/null 2>&1 &&
+ $ld $lddlflags -o dyna.$dlext dyna.o > /dev/null 2>&1 &&
$cc $ccflags $ldflags $cccdlflags $ccdlflags fred.c -o fred $libs > /dev/null 2>&1; then
xxx=`./fred`
case $xxx in
set d_dlsymun
eval $setvar
-: see if setuid scripts can be secure
-$cat <<EOM
-
-Some kernels have a bug that prevents setuid #! scripts from being
-secure. Some sites have disabled setuid #! scripts because of this.
-
-First let's decide if your kernel supports secure setuid #! scripts.
-(If setuid #! scripts would be secure but have been disabled anyway,
-don't say that they are secure if asked.)
-
-EOM
+: see if dup2 exists
+set dup2 d_dup2
+eval $inlibc
-val="$undef"
-if $test -d /dev/fd; then
- echo "#!$ls" >reflect
- chmod +x,u+s reflect
- ./reflect >flect 2>&1
- if $contains "/dev/fd" flect >/dev/null; then
- echo "Congratulations, your kernel has secure setuid scripts!" >&4
+: Locate the flags for 'open()'
+echo " "
+$cat >open3.c <<'EOCP'
+#include <sys/types.h>
+#ifdef I_FCNTL
+#include <fcntl.h>
+#endif
+#ifdef I_SYS_FILE
+#include <sys/file.h>
+#endif
+main() {
+ if(O_RDONLY);
+#ifdef O_TRUNC
+ exit(0);
+#else
+ exit(1);
+#endif
+}
+EOCP
+: check sys/file.h first to get FREAD on Sun
+if $test `./findhdr sys/file.h` && \
+ $cc $cppflags "-DI_SYS_FILE" open3.c -o open3 >/dev/null 2>&1 ; then
+ h_sysfile=true;
+ echo "<sys/file.h> defines the O_* constants..." >&4
+ if ./open3; then
+ echo "and you have the 3 argument form of open()." >&4
val="$define"
else
- $cat <<EOM
-If you are not sure if they are secure, I can check but I'll need a
-username and password different from the one you are using right now.
-If you don't have such a username or don't want me to test, simply
-enter 'none'.
-
-EOM
- rp='Other username to test security of setuid scripts with?'
- dflt='none'
- . ./myread
- case "$ans" in
- n|none)
- case "$d_suidsafe" in
- '') echo "I'll assume setuid scripts are *not* secure." >&4
- dflt=n;;
- "$undef")
- echo "Well, the $hint value is *not* secure." >&4
- dflt=n;;
- *) echo "Well, the $hint value *is* secure." >&4
- dflt=y;;
- esac
- ;;
- *)
- $rm -f reflect flect
- echo "#!$ls" >reflect
- chmod +x,u+s reflect
- echo >flect
- chmod a+w flect
- echo '"su" will (probably) prompt you for '"$ans's password."
- su $ans -c './reflect >flect'
- if $contains "/dev/fd" flect >/dev/null; then
- echo "Okay, it looks like setuid scripts are secure." >&4
- dflt=y
- else
- echo "I don't think setuid scripts are secure." >&4
- dflt=n
- fi
- ;;
- esac
- rp='Does your kernel have *secure* setuid scripts?'
- . ./myread
- case "$ans" in
- [yY]*) val="$define";;
- *) val="$undef";;
- esac
+ echo "but not the 3 argument form of open(). Oh, well." >&4
+ val="$undef"
+ fi
+elif $test `./findhdr fcntl.h` && \
+ $cc "-DI_FCNTL" open3.c -o open3 >/dev/null 2>&1 ; then
+ h_fcntl=true;
+ echo "<fcntl.h> defines the O_* constants..." >&4
+ if ./open3; then
+ echo "and you have the 3 argument form of open()." >&4
+ val="$define"
+ else
+ echo "but not the 3 argument form of open(). Oh, well." >&4
+ val="$undef"
fi
else
- echo "I don't think setuid scripts are secure (no /dev/fd directory)." >&4
val="$undef"
+ echo "I can't find the O_* constant definitions! You got problems." >&4
fi
-set d_suidsafe
+set d_open3
eval $setvar
+$rm -f open3*
-$rm -f reflect flect
-
-: now see if they want to do setuid emulation
-echo " "
-val="$undef"
-case "$d_suidsafe" in
-"$define")
- val="$undef"
- echo "No need to emulate SUID scripts since they are secure here." >& 4
- ;;
+: check for non-blocking I/O stuff
+case "$h_sysfile" in
+true) echo "#include <sys/file.h>" > head.c;;
*)
- $cat <<EOM
-Some systems have disabled setuid scripts, especially systems where
-setuid scripts cannot be secure. On systems where setuid scripts have
-been disabled, the setuid/setgid bits on scripts are currently
-useless. It is possible for $package to detect those bits and emulate
-setuid/setgid in a secure fashion. This emulation will only work if
-setuid scripts have been disabled in your kernel.
-
-EOM
- case "$d_dosuid" in
- "$define") dflt=y ;;
- *) dflt=n ;;
- esac
- rp="Do you want to do setuid/setgid emulation?"
- . ./myread
- case "$ans" in
- [yY]*) val="$define";;
- *) val="$undef";;
+ case "$h_fcntl" in
+ true) echo "#include <fcntl.h>" > head.c;;
+ *) echo "#include <sys/fcntl.h>" > head.c;;
esac
;;
esac
-set d_dosuid
-eval $setvar
-
-: see if drem exists
-set drem d_drem
-eval $inlibc
-
-: see if dup2 exists
-set dup2 d_dup2
-eval $inlibc
-
-: see if fchmod exists
-set fchmod d_fchmod
-eval $inlibc
-
-: see if fchown exists
-set fchown d_fchown
-eval $inlibc
-
-: see if this is an fcntl system
-set fcntl d_fcntl
-eval $inlibc
-
-: see if fgetpos exists
-set fgetpos d_fgetpos
-eval $inlibc
-
-: see if we can have long filenames
echo " "
-rmlist="$rmlist /tmp/cf$$"
-$test -d /tmp/cf$$ || mkdir /tmp/cf$$
-first=123456789abcdef
-second=/tmp/cf$$/$first
-$rm -f $first $second
-if (echo hi >$first) 2>/dev/null; then
- if $test -f 123456789abcde; then
- echo 'You cannot have filenames longer than 14 characters. Sigh.' >&4
- val="$undef"
+echo "Figuring out the flag used by open() for non-blocking I/O..." >&4
+case "$o_nonblock" in
+'')
+ $cat head.c > try.c
+ $cat >>try.c <<'EOCP'
+main() {
+#ifdef O_NONBLOCK
+ printf("O_NONBLOCK\n");
+ exit(0);
+#endif
+#ifdef O_NDELAY
+ printf("O_NDELAY\n");
+ exit(0);
+#endif
+#ifdef FNDELAY
+ printf("FNDELAY\n");
+ exit(0);
+#endif
+ exit(0);
+}
+EOCP
+ if $cc $ccflags $ldflags try.c -o try >/dev/null 2>&1; then
+ o_nonblock=`./try`
+ case "$o_nonblock" in
+ '') echo "I can't figure it out, assuming O_NONBLOCK will do.";;
+ *) echo "Seems like we can use $o_nonblock.";;
+ esac
else
- if (echo hi >$second) 2>/dev/null; then
- if $test -f /tmp/cf$$/123456789abcde; then
- $cat <<'EOM'
-That's peculiar... You can have filenames longer than 14 characters, but only
-on some of the filesystems. Maybe you are using NFS. Anyway, to avoid problems
-I shall consider your system cannot support long filenames at all.
-EOM
- val="$undef"
- else
- echo 'You can have filenames longer than 14 characters.' >&4
- val="$define"
- fi
- else
- $cat <<'EOM'
-How confusing! Some of your filesystems are sane enough to allow filenames
-longer than 14 characters but some others like /tmp can't even think about them.
-So, for now on, I shall assume your kernel does not allow them at all.
-EOM
+ echo "(I can't compile the test program; pray O_NONBLOCK is right!)"
+ fi
+ ;;
+*) echo "Using $hint value $o_nonblock.";;
+esac
+$rm -f try try.* .out core
+
+echo " "
+echo "Let's see what value errno gets from read() on a $o_nonblock file..." >&4
+case "$eagain" in
+'')
+ $cat head.c > try.c
+ $cat >>try.c <<EOCP
+#include <errno.h>
+#include <sys/types.h>
+#include <signal.h>
+#define MY_O_NONBLOCK $o_nonblock
+extern int errno;
+$signal_t blech(x) int x; { exit(3); }
+EOCP
+ $cat >> try.c <<'EOCP'
+main()
+{
+ int pd[2];
+ int pu[2];
+ char buf[1];
+ char string[100];
+
+ pipe(pd); /* Down: child -> parent */
+ pipe(pu); /* Up: parent -> child */
+ if (0 != fork()) {
+ int ret;
+ close(pd[1]); /* Parent reads from pd[0] */
+ close(pu[0]); /* Parent writes (blocking) to pu[1] */
+ if (-1 == fcntl(pd[0], F_SETFL, MY_O_NONBLOCK))
+ exit(1);
+ signal(SIGALRM, blech);
+ alarm(5);
+ if ((ret = read(pd[0], buf, 1)) > 0) /* Nothing to read! */
+ exit(2);
+ sprintf(string, "%d\n", ret);
+ write(2, string, strlen(string));
+ alarm(0);
+#ifdef EAGAIN
+ if (errno == EAGAIN) {
+ printf("EAGAIN\n");
+ goto ok;
+ }
+#endif
+#ifdef EWOULDBLOCK
+ if (errno == EWOULDBLOCK)
+ printf("EWOULDBLOCK\n");
+#endif
+ ok:
+ write(pu[1], buf, 1); /* Unblocks child, tell it to close our pipe */
+ sleep(2); /* Give it time to close our pipe */
+ alarm(5);
+ ret = read(pd[0], buf, 1); /* Should read EOF */
+ alarm(0);
+ sprintf(string, "%d\n", ret);
+ write(3, string, strlen(string));
+ exit(0);
+ }
+
+ close(pd[0]); /* We write to pd[1] */
+ close(pu[1]); /* We read from pu[0] */
+ read(pu[0], buf, 1); /* Wait for parent to signal us we may continue */
+ close(pd[1]); /* Pipe pd is now fully closed! */
+ exit(0); /* Bye bye, thank you for playing! */
+}
+EOCP
+ if $cc $ccflags $ldflags try.c -o try >/dev/null 2>&1; then
+ echo "$startsh" >mtry
+ echo "./try >try.out 2>try.ret 3>try.err || exit 4" >>mtry
+ chmod +x mtry
+ ./mtry >/dev/null 2>&1
+ case $? in
+ 0) eagain=`$cat try.out`;;
+ 1) echo "Could not perform non-blocking setting!";;
+ 2) echo "I did a successful read() for something that was not there!";;
+ 3) echo "Hmm... non-blocking I/O does not seem to be working!";;
+ *) echo "Something terribly wrong happened during testing.";;
+ esac
+ rd_nodata=`$cat try.ret`
+ echo "A read() system call with no data present returns $rd_nodata."
+ case "$rd_nodata" in
+ 0|-1) ;;
+ *)
+ echo "(That's peculiar, fixing that to be -1.)"
+ rd_nodata=-1
+ ;;
+ esac
+ case "$eagain" in
+ '')
+ echo "Forcing errno EAGAIN on read() with no data available."
+ eagain=EAGAIN
+ ;;
+ *)
+ echo "Your read() sets errno to $eagain when no data is available."
+ ;;
+ esac
+ status=`$cat try.err`
+ case "$status" in
+ 0) echo "And it correctly returns 0 to signal EOF.";;
+ -1) echo "But it also returns -1 to signal EOF, so be careful!";;
+ *) echo "However, your read() returns '$status' on EOF??";;
+ esac
+ val="$define"
+ if test "$status" -eq "$rd_nodata"; then
+ echo "WARNING: you can't distinguish between EOF and no data!"
val="$undef"
fi
+ else
+ echo "I can't compile the test program--assuming errno EAGAIN will do."
+ eagain=EAGAIN
fi
-else
- $cat <<'EOM'
-You can't have filenames longer than 14 chars. You can't even think about them!
-EOM
- val="$undef"
-fi
-set d_flexfnam
-eval $setvar
-$rm -rf /tmp/cf$$ 123456789abcde*
+ set d_eofnblk
+ eval $setvar
+ ;;
+*)
+ echo "Using $hint value $eagain."
+ echo "Your read() returns $rd_nodata when no data is present."
+ case "$d_eofnblk" in
+ "$define") echo "And you can see EOF because read() returns 0.";;
+ "$undef") echo "But you can't see EOF status from read() returned value.";;
+ *)
+ echo "(Assuming you can't see EOF status from read anyway.)"
+ d_eofnblk=$undef
+ ;;
+ esac
+ ;;
+esac
+$rm -f try try.* .out core head.c mtry
-: see if flock exists
-set flock d_flock
+: see if fchmod exists
+set fchmod d_fchmod
+eval $inlibc
+
+: see if fchown exists
+set fchown d_fchown
+eval $inlibc
+
+: see if this is an fcntl system
+set fcntl d_fcntl
+eval $inlibc
+
+: see if fgetpos exists
+set fgetpos d_fgetpos
eval $inlibc
-: see if fmod exists
-set fmod d_fmod
+: see if flock exists
+set flock d_flock
eval $inlibc
: see if fork exists
set link d_link
eval $inlibc
-: see if stdio is really std
-echo " "
-xxx=`./findhdr stdio.h`
-if $contains 'char.*_ptr;' "$xxx" >/dev/null 2>&1 ; then
- if $contains '_cnt;' "$xxx" >/dev/null 2>&1 ; then
- echo "Your stdio is pretty std." >&4
- val="$define"
- else
- echo "Your stdio isn't very std." >&4
- val="$undef"
- fi
-else
- echo "Your stdio isn't very std." >&4
- val="$undef"
-fi
-set d_stdstdio
-eval $setvar
-
-: see if stdio is like that in linux
-case "$d_stdstdio" in
-"$undef")
- echo " "
- xxx=`./findhdr stdio.h`
- $cppstdin $cppflags $cppminus < "$xxx" > stdio.E
- if $contains 'char.*_IO_read_base' stdio.E >/dev/null 2>&1 && \
- $contains '_IO_read_ptr' stdio.E >/dev/null 2>&1 && \
- $contains '_IO_read_end' stdio.E >/dev/null 2>&1 ; then
- echo "Your stdio looks like linux." >&4
- val="$define"
- else
- echo "You don't have linux stdio, either." >&4
- val="$undef"
- fi
- $rm -f stdio.E
- ;;
-*) val="$undef" ;;
-esac
-
-set d_linuxstd
-eval $setvar
-
: see if localeconv exists
set localeconv d_locconv
eval $inlibc
set nice d_nice
eval $inlibc
-: Locate the flags for 'open()'
-echo " "
-$cat >open3.c <<'EOCP'
-#include <sys/types.h>
-#ifdef I_FCNTL
-#include <fcntl.h>
-#endif
-#ifdef I_SYS_FILE
-#include <sys/file.h>
-#endif
-main() {
- if(O_RDONLY);
-#ifdef O_TRUNC
- exit(0);
-#else
- exit(1);
-#endif
-}
-EOCP
-: check sys/file.h first to get FREAD on Sun
-if $test `./findhdr sys/file.h` && \
- $cc $cppflags "-DI_SYS_FILE" open3.c -o open3 >/dev/null 2>&1 ; then
- h_sysfile=true;
- echo "<sys/file.h> defines the O_* constants..." >&4
- if ./open3; then
- echo "and you have the 3 argument form of open()." >&4
- val="$define"
- else
- echo "but not the 3 argument form of open(). Oh, well." >&4
- val="$undef"
- fi
-elif $test `./findhdr fcntl.h` && \
- $cc "-DI_FCNTL" open3.c -o open3 >/dev/null 2>&1 ; then
- h_fcntl=true;
- echo "<fcntl.h> defines the O_* constants..." >&4
- if ./open3; then
- echo "and you have the 3 argument form of open()." >&4
- val="$define"
- else
- echo "but not the 3 argument form of open(). Oh, well." >&4
- val="$undef"
- fi
-else
- val="$undef"
- echo "I can't find the O_* constant definitions! You got problems." >&4
-fi
-set d_open3
-eval $setvar
-$rm -f open3*
-
: see if pause exists
set pause d_pause
eval $inlibc
set pipe d_pipe
eval $inlibc
-: see if this is a pwd system
-echo " "
-xxx=`./findhdr pwd.h`
-if $test "$xxx"; then
- i_pwd="$define"
- echo "<pwd.h> found." >&4
+: see if poll exists
+set poll d_poll
+eval $inlibc
+
+: see if this is a pwd.h system
+set pwd.h i_pwd
+eval $inhdr
+
+case "$i_pwd" in
+$define)
+ xxx=`./findhdr pwd.h`
$cppstdin $cppflags $cppminus < $xxx >$$.h
+
if $contains 'pw_quota' $$.h >/dev/null 2>&1; then
- d_pwquota="$define"
+ val="$define"
else
- d_pwquota="$undef"
+ val="$undef"
fi
+ set d_pwquota
+ eval $setvar
+
if $contains 'pw_age' $$.h >/dev/null 2>&1; then
- d_pwage="$define"
+ val="$define"
else
- d_pwage="$undef"
+ val="$undef"
fi
+ set d_pwage
+ eval $setvar
+
if $contains 'pw_change' $$.h >/dev/null 2>&1; then
- d_pwchange="$define"
+ val="$define"
else
- d_pwchange="$undef"
+ val="$undef"
fi
+ set d_pwchange
+ eval $setvar
+
if $contains 'pw_class' $$.h >/dev/null 2>&1; then
- d_pwclass="$define"
+ val="$define"
else
- d_pwclass="$undef"
+ val="$undef"
fi
+ set d_pwclass
+ eval $setvar
+
if $contains 'pw_expire' $$.h >/dev/null 2>&1; then
- d_pwexpire="$define"
+ val="$define"
else
- d_pwexpire="$undef"
+ val="$undef"
fi
+ set d_pwexpire
+ eval $setvar
+
if $contains 'pw_comment' $$.h >/dev/null 2>&1; then
- d_pwcomment="$define"
+ val="$define"
else
- d_pwcomment="$undef"
+ val="$undef"
fi
+ set d_pwcomment
+ eval $setvar
+
$rm -f $$.h
-else
- i_pwd="$undef"
- d_pwquota="$undef"
- d_pwage="$undef"
- d_pwchange="$undef"
- d_pwclass="$undef"
- d_pwexpire="$undef"
- d_pwcomment="$undef"
- echo "<pwd.h> NOT found." >&4
-fi
+ ;;
+*)
+ val="$undef";
+ set d_pwquota; eval $setvar
+ set d_pwage; eval $setvar
+ set d_pwchange; eval $setvar
+ set d_pwclass; eval $setvar
+ set d_pwexpire; eval $setvar
+ set d_pwcomment; eval $setvar
+ ;;
+esac
: see if readdir and friends exist
set readdir d_readdir
exit(0);
}
EOCP
- if $cc foo.c -o safebcpy $ccflags $ldflags $libs >/dev/null 2>&1 ; then
+ if $cc $ccflags $ldflags foo.c -o safebcpy $libs >/dev/null 2>&1; then
if ./safebcpy 2>/dev/null; then
echo "Yes, it can."
val="$define"
for (align = 7; align >= 0; align--) {
for (len = 36; len; len--) {
b = buf+align;
- memcpy(abc, b, len);
+ memcpy(b, abc, len);
for (off = 1; off <= len; off++) {
- memcpy(b, b+off, len);
memcpy(b+off, b, len);
+ memcpy(b, b+off, len);
if (memcmp(b, abc, len))
exit(1);
}
exit(0);
}
EOCP
- if $cc foo.c -o safemcpy $ccflags $ldflags $libs >/dev/null 2>&1 ; then
+ if $cc $ccflags $ldflags foo.c -o safemcpy $libs >/dev/null 2>&1; then
if ./safemcpy 2>/dev/null; then
echo "Yes, it can."
val="$define"
echo "It can't, sorry."
fi
else
- echo "(I can't compile the test program, so we'll assume not...)"
- fi
- ;;
-esac
-$rm -f foo.* safemcpy core
-set d_safemcpy
-eval $setvar
-
-: see if select exists
-set select d_select
-eval $inlibc
-
-: see if semctl exists
-set semctl d_semctl
-eval $inlibc
-
-: see if semget exists
-set semget d_semget
-eval $inlibc
-
-: see if semop exists
-set semop d_semop
-eval $inlibc
-
-: see how much of the 'sem*(2)' library is present.
-h_sem=true
-echo " "
-case "$d_semctl$d_semget$d_semop" in
-*"$undef"*) h_sem=false;;
-esac
-: we could also check for sys/ipc.h ...
-if $h_sem && $test `./findhdr sys/sem.h`; then
- echo "You have the full sem*(2) library." >&4
- val="$define"
-else
- echo "You don't have the full sem*(2) library." >&4
- val="$undef"
-fi
-set d_sem
-eval $setvar
-
-: see if setegid exists
-set setegid d_setegid
-eval $inlibc
-
-: see if seteuid exists
-set seteuid d_seteuid
-eval $inlibc
-
-: see if setlinebuf exists
-set setlinebuf d_setlinebuf
-eval $inlibc
-
-: see if setlocale exists
-set setlocale d_setlocale
-eval $inlibc
-
-: see if setpgid exists
-set setpgid d_setpgid
-eval $inlibc
-
-: see if setpgrp2 exists
-set setpgrp2 d_setpgrp2
-eval $inlibc
-
-: see if setpriority exists
-set setpriority d_setprior
-eval $inlibc
-
-: see if setregid exists
-set setregid d_setregid
-eval $inlibc
-set setresgid d_setresgid
-eval $inlibc
-
-: see if setreuid exists
-set setreuid d_setreuid
-eval $inlibc
-set setresuid d_setresuid
-eval $inlibc
-
-: see if setrgid exists
-set setrgid d_setrgid
-eval $inlibc
-
-: see if setruid exists
-set setruid d_setruid
-eval $inlibc
-
-: see if setsid exists
-set setsid d_setsid
-eval $inlibc
-
-: see if shmctl exists
-set shmctl d_shmctl
-eval $inlibc
-
-: see if shmget exists
-set shmget d_shmget
-eval $inlibc
-
-: see if shmat exists
-set shmat d_shmat
-eval $inlibc
-: see what shmat returns
-case "$d_shmat" in
-"$define")
- $cat >shmat.c <<'END'
-#include <sys/shm.h>
-void *shmat();
-END
- if $cc $ccflags -c shmat.c >/dev/null 2>&1; then
- shmattype='void *'
- else
- shmattype='char *'
- fi
- echo "and it returns ($shmattype)." >&4
- : see if a prototype for shmat is available
- $cppstdin $cppflags $cppminus < $usrinc/sys/shm.h > shmat.c 2>/dev/null
- if $contains 'shmat.*(' shmat.c >/dev/null 2>&1; then
- val="$define"
- else
- val="$undef"
- fi
- $rm -f shmat.[co]
- ;;
-*)
- val="$undef"
+ echo "(I can't compile the test program, so we'll assume not...)"
+ fi
;;
esac
-set d_shmatprototype
+$rm -f foo.* safemcpy core
+set d_safemcpy
eval $setvar
-: see if shmdt exists
-set shmdt d_shmdt
+: see if select exists
+set select d_select
eval $inlibc
-: see how much of the 'shm*(2)' library is present.
-h_shm=true
-echo " "
-case "$d_shmctl$d_shmget$d_shmat$d_shmdt" in
-*"$undef"*) h_shm=false;;
-esac
-: we could also check for sys/ipc.h ...
-if $h_shm && $test `./findhdr sys/shm.h`; then
- echo "You have the full shm*(2) library." >&4
- val="$define"
-else
- echo "You don't have the full shm*(2) library." >&4
- val="$undef"
-fi
-set d_shm
-eval $setvar
+: see if semctl exists
+set semctl d_semctl
+eval $inlibc
-socketlib=''
-sockethdr=''
-: see whether socket exists
-echo " "
-$echo $n "Hmm... $c" >&4
-if set socket val -f d_socket; eval $csym; $val; then
- echo "Looks like you have Berkeley networking support." >&4
- d_socket="$define"
- if set setsockopt val -f; eval $csym; $val; then
- d_oldsock="$undef"
- else
- echo "...but it uses the old 4.1c interface, rather than 4.2" >&4
- d_oldsock="$define"
- fi
-else
- if $contains socklib libc.list >/dev/null 2>&1; then
- echo "Looks like you have Berkeley networking support." >&4
- d_socket="$define"
- : we will have to assume that it supports the 4.2 BSD interface
- d_oldsock="$undef"
- else
- echo "You don't have Berkeley networking in libc.a..." >&4
- if test -f /usr/lib/libnet.a; then
- ( (nm $nm_opt /usr/lib/libnet.a | eval $nm_extract) || \
- ar t /usr/lib/libnet.a) 2>/dev/null >> libc.list
- if $contains socket libc.list >/dev/null 2>&1; then
- echo "...but the Wollongong group seems to have hacked it in." >&4
- socketlib="-lnet"
- sockethdr="-I/usr/netinclude"
- d_socket="$define"
- if $contains setsockopt libc.list >/dev/null 2>&1; then
- d_oldsock="$undef"
- else
- echo "...using the old 4.1c interface, rather than 4.2" >&4
- d_oldsock="$define"
- fi
- else
- echo "or even in libnet.a, which is peculiar." >&4
- d_socket="$undef"
- d_oldsock="$undef"
- fi
- else
- echo "or anywhere else I see." >&4
- d_socket="$undef"
- d_oldsock="$undef"
- fi
- fi
-fi
+: see if semget exists
+set semget d_semget
+eval $inlibc
-: see if socketpair exists
-set socketpair d_sockpair
+: see if semop exists
+set semop d_semop
eval $inlibc
-: see if stat knows about block sizes
+: see how much of the 'sem*(2)' library is present.
+h_sem=true
echo " "
-xxx=`./findhdr sys/stat.h`
-if $contains 'st_blocks;' "$xxx" >/dev/null 2>&1 ; then
- if $contains 'st_blksize;' "$xxx" >/dev/null 2>&1 ; then
- echo "Your stat() knows about block sizes." >&4
- val="$define"
- else
- echo "Your stat() doesn't know about block sizes." >&4
- val="$undef"
- fi
+case "$d_semctl$d_semget$d_semop" in
+*"$undef"*) h_sem=false;;
+esac
+: we could also check for sys/ipc.h ...
+if $h_sem && $test `./findhdr sys/sem.h`; then
+ echo "You have the full sem*(2) library." >&4
+ val="$define"
else
- echo "Your stat() doesn't know about block sizes." >&4
+ echo "You don't have the full sem*(2) library." >&4
val="$undef"
fi
-set d_statblks
+set d_sem
eval $setvar
-: see if strcoll exists
-set strcoll d_strcoll
+: see if setegid exists
+set setegid d_setegid
eval $inlibc
-: check for structure copying
-echo " "
-echo "Checking to see if your C compiler can copy structs..." >&4
-$cat >try.c <<'EOCP'
-main()
-{
- struct blurfl {
- int dyick;
- } foo, bar;
-
- foo = bar;
-}
-EOCP
-if $cc -c try.c >/dev/null 2>&1 ; then
- val="$define"
- echo "Yup, it can."
-else
- val="$undef"
- echo "Nope, it can't."
-fi
-set d_strctcpy
-eval $setvar
-$rm -f try.*
+: see if seteuid exists
+set seteuid d_seteuid
+eval $inlibc
-: see if strerror and/or sys_errlist[] exist
-echo " "
-if set strerror val -f d_strerror; eval $csym; $val; then
- echo 'strerror() found.' >&4
- d_strerror="$define"
- d_strerrm='strerror(e)'
- if set sys_errlist val -a d_syserrlst; eval $csym; $val; then
- echo "(You also have sys_errlist[], so we could roll our own strerror.)"
- d_syserrlst="$define"
- else
- echo "(Since you don't have sys_errlist[], sterror() is welcome.)"
- d_syserrlst="$undef"
- fi
-elif xxx=`./findhdr string.h`; test "$xxx" || xxx=`./findhdr strings.h`; \
- $contains '#[ ]*define.*strerror' "$xxx" >/dev/null 2>&1; then
- echo 'strerror() found in string header.' >&4
- d_strerror="$define"
- d_strerrm='strerror(e)'
- if set sys_errlist val -a d_syserrlst; eval $csym; $val; then
- echo "(Most probably, strerror() uses sys_errlist[] for descriptions.)"
- d_syserrlst="$define"
- else
- echo "(You don't appear to have any sys_errlist[], how can this be?)"
- d_syserrlst="$undef"
- fi
-elif set sys_errlist val -a d_syserrlst; eval $csym; $val; then
-echo "strerror() not found, but you have sys_errlist[] so we'll use that." >&4
- d_strerror="$undef"
- d_syserrlst="$define"
- d_strerrm='((e)<0||(e)>=sys_nerr?"unknown":sys_errlist[e])'
-else
- echo 'strerror() and sys_errlist[] NOT found.' >&4
- d_strerror="$undef"
- d_syserrlst="$undef"
- d_strerrm='"unknown"'
-fi
+: see if setlinebuf exists
+set setlinebuf d_setlinebuf
+eval $inlibc
-: see if strxfrm exists
-set strxfrm d_strxfrm
+: see if setlocale exists
+set setlocale d_setlocale
eval $inlibc
-: see if symlink exists
-set symlink d_symlink
+: see if setpgid exists
+set setpgid d_setpgid
eval $inlibc
-: see if syscall exists
-set syscall d_syscall
+: see if setpgrp2 exists
+set setpgrp2 d_setpgrp2
eval $inlibc
-: see if sysconf exists
-set sysconf d_sysconf
+: see if setpriority exists
+set setpriority d_setprior
eval $inlibc
-: see if system exists
-set system d_system
+: see if setregid exists
+set setregid d_setregid
+eval $inlibc
+set setresgid d_setresgid
eval $inlibc
-: see if tcgetpgrp exists
-set tcgetpgrp d_tcgetpgrp
+: see if setreuid exists
+set setreuid d_setreuid
+eval $inlibc
+set setresuid d_setresuid
eval $inlibc
-: see if tcsetpgrp exists
-set tcsetpgrp d_tcsetpgrp
+: see if setrgid exists
+set setrgid d_setrgid
eval $inlibc
-: define an is-a-typedef? function
-typedef='type=$1; var=$2; def=$3; shift; shift; shift; inclist=$@;
-case "$inclist" in
-"") inclist="sys/types.h";;
-esac;
-eval "varval=\$$var";
-case "$varval" in
-"")
- $rm -f temp.c;
- for inc in $inclist; do
- echo "#include <$inc>" >>temp.c;
- done;
- $cppstdin $cppflags $cppminus < temp.c >temp.E 2>/dev/null;
- if $contains $type temp.E >/dev/null 2>&1; then
- eval "$var=$type";
- else
- eval "$var=$def";
- fi;
- $rm -f temp.?;;
-*) eval "$var=$varval";;
-esac'
+: see if setruid exists
+set setruid d_setruid
+eval $inlibc
-: see if this is a sys/times.h system
-set sys/times.h i_systimes
-eval $inhdr
+: see if setsid exists
+set setsid d_setsid
+eval $inlibc
-: see if times exists
-echo " "
-if set times val -f d_times; eval $csym; $val; then
- echo 'times() found.' >&4
- d_times="$define"
- inc=''
- case "$i_systimes" in
- "$define") inc='sys/times.h';;
- esac
- set clock_t clocktype long stdio.h sys/types.h $inc
- eval $typedef
- dflt="$clocktype"
- echo " "
- rp="What type is returned by times() on this sytem?"
- . ./myread
- clocktype="$ans"
-else
- echo 'times() NOT found, hope that will do.' >&4
- d_times="$undef"
- clocktype='int'
-fi
+: see if shmctl exists
+set shmctl d_shmctl
+eval $inlibc
-: see if truncate exists
-set truncate d_truncate
+: see if shmget exists
+set shmget d_shmget
eval $inlibc
-: see if tzname[] exists
+: see if shmat exists
+set shmat d_shmat
+eval $inlibc
+: see what shmat returns
+case "$d_shmat" in
+"$define")
+ $cat >shmat.c <<'END'
+#include <sys/shm.h>
+void *shmat();
+END
+ if $cc $ccflags -c shmat.c >/dev/null 2>&1; then
+ shmattype='void *'
+ else
+ shmattype='char *'
+ fi
+ echo "and it returns ($shmattype)." >&4
+ : see if a prototype for shmat is available
+ xxx=`./findhdr sys/shm.h`
+ $cppstdin $cppflags $cppminus < $xxx > shmat.c 2>/dev/null
+ if $contains 'shmat.*(' shmat.c >/dev/null 2>&1; then
+ val="$define"
+ else
+ val="$undef"
+ fi
+ $rm -f shmat.[co]
+ ;;
+*)
+ val="$undef"
+ ;;
+esac
+set d_shmatprototype
+eval $setvar
+
+: see if shmdt exists
+set shmdt d_shmdt
+eval $inlibc
+
+: see how much of the 'shm*(2)' library is present.
+h_shm=true
echo " "
-if set tzname val -a d_tzname; eval $csym; $val; then
+case "$d_shmctl$d_shmget$d_shmat$d_shmdt" in
+*"$undef"*) h_shm=false;;
+esac
+: we could also check for sys/ipc.h ...
+if $h_shm && $test `./findhdr sys/shm.h`; then
+ echo "You have the full shm*(2) library." >&4
val="$define"
- echo 'tzname[] found.' >&4
else
+ echo "You don't have the full shm*(2) library." >&4
val="$undef"
- echo 'tzname[] NOT found.' >&4
fi
-set d_tzname
+set d_shm
eval $setvar
-: see if umask exists
-set umask d_umask
-eval $inlibc
-
-: see if we have to deal with yellow pages, now NIS.
-if $test -d /usr/etc/yp || $test -d /etc/yp; then
- if $test -f /usr/etc/nibindd; then
- echo " "
- echo "I'm fairly confident you're on a NeXT."
- echo " "
- rp='Do you get the hosts file via NetInfo?'
- dflt=y
- case "$hostcat" in
- nidump*) ;;
- '') ;;
- *) dflt=n;;
- esac
- . ./myread
- case "$ans" in
- y*) hostcat='nidump hosts .';;
- *) ;;
- esac
+: see if sigvector exists -- since sigvec will match the substring
+echo " "
+if set sigvector val -f d_sigvectr; eval $csym; $val; then
+ echo 'sigvector() found--you must be running HP-UX.' >&4
+ val="$define"; set d_sigvectr; eval $setvar
+ val="$define"; set d_sigvec; eval $setvar
+else
+: try the original name
+ d_sigvectr="$undef"
+ if set sigvec val -f d_sigvec; eval $csym; $val; then
+ echo 'sigvec() found.' >&4
+ val="$define"; set d_sigvec; eval $setvar
+ else
+ echo 'sigvec() not found--race conditions with signals may occur.' >&4
+ val="$undef"; set d_sigvec; eval $setvar
fi
- case "$hostcat" in
- nidump*) ;;
- *)
- case "$hostcat" in
- *ypcat*) dflt=y;;
- '') if $contains '^\+' /etc/passwd >/dev/null 2>&1; then
- dflt=y
- else
- dflt=n
- fi;;
- *) dflt=n;;
- esac
- echo " "
- rp='Are you getting the hosts file via yellow pages?'
- . ./myread
- case "$ans" in
- y*) hostcat='ypcat hosts';;
- *) hostcat='cat /etc/hosts';;
- esac
- ;;
- esac
fi
-: now get the host name
+: see if we have sigaction
+set sigaction d_sigaction
+eval $inlibc
+
+
+: see if sigsetjmp exists
echo " "
-echo "Figuring out host name..." >&4
-case "$myhostname" in
-'') cont=true
- echo 'Maybe "hostname" will work...'
- if tans=`sh -c hostname 2>&1` ; then
- myhostname=$tans
- phostname=hostname
- cont=''
+case "$d_sigsetjmp" in
+'')
+ $cat >set.c <<EOP
+#include <setjmp.h>
+sigjmp_buf env;
+int set = 1;
+main()
+{
+ if (sigsetjmp(env,1))
+ exit(set);
+ set = 0;
+ siglongjmp(env, 1);
+ exit(1);
+}
+EOP
+ if $cc $ccflags $ldflags set.c -o set $libs >/dev/null 2>&1; then
+ if ./set >/dev/null 2>&1; then
+ echo "POSIX sigsetjmp found." >&4
+ val="$define"
+ else
+ $cat <<EOM
+Uh-Oh! You have POSIX sigsetjmp and siglongjmp, but they do not work properly!!
+EOM
+ val="$undef"
+ fi
+ else
+ echo "Sigsetjmp not found." >&4
+ val="$undef"
fi
;;
-*) cont='';;
+*) val="$d_sigsetjmp"
+ case "$d_sigsetjmp" in
+ $define) echo "POSIX sigsetjmp found." >&4;;
+ $undef) echo "Sigsetjmp not found." >&4;;
+ esac
+ ;;
esac
-if $test "$cont"; then
- if ./xenix; then
- echo 'Oh, dear. Maybe "/etc/systemid" is the key...'
- if tans=`cat /etc/systemid 2>&1` ; then
- myhostname=$tans
- phostname='cat /etc/systemid'
- echo "Whadyaknow. Xenix always was a bit strange..."
- cont=''
- fi
- elif $test -r /etc/systemid; then
- echo "(What is a non-Xenix system doing with /etc/systemid?)"
+set d_sigsetjmp
+eval $setvar
+$rm -f set.c set
+
+socketlib=''
+sockethdr=''
+: see whether socket exists
+echo " "
+$echo $n "Hmm... $c" >&4
+if set socket val -f d_socket; eval $csym; $val; then
+ echo "Looks like you have Berkeley networking support." >&4
+ d_socket="$define"
+ if set setsockopt val -f; eval $csym; $val; then
+ d_oldsock="$undef"
+ else
+ echo "...but it uses the old 4.1c interface, rather than 4.2" >&4
+ d_oldsock="$define"
fi
-fi
-if $test "$cont"; then
- echo 'No, maybe "uuname -l" will work...'
- if tans=`sh -c 'uuname -l' 2>&1` ; then
- myhostname=$tans
- phostname='uuname -l'
+else
+ if $contains socklib libc.list >/dev/null 2>&1; then
+ echo "Looks like you have Berkeley networking support." >&4
+ d_socket="$define"
+ : we will have to assume that it supports the 4.2 BSD interface
+ d_oldsock="$undef"
else
- echo 'Strange. Maybe "uname -n" will work...'
- if tans=`sh -c 'uname -n' 2>&1` ; then
- myhostname=$tans
- phostname='uname -n'
- else
- echo 'Oh well, maybe I can mine it out of whoami.h...'
- if tans=`sh -c $contains' sysname $usrinc/whoami.h' 2>&1` ; then
- myhostname=`echo "$tans" | $sed 's/^.*"\(.*\)"/\1/'`
- phostname="sed -n -e '"'/sysname/s/^.*\"\\(.*\\)\"/\1/{'"' -e p -e q -e '}' <$usrinc/whoami.h"
+ echo "You don't have Berkeley networking in libc.a..." >&4
+ if test -f /usr/lib/libnet.a; then
+ ( (nm $nm_opt /usr/lib/libnet.a | eval $nm_extract) || \
+ ar t /usr/lib/libnet.a) 2>/dev/null >> libc.list
+ if $contains socket libc.list >/dev/null 2>&1; then
+ echo "...but the Wollongong group seems to have hacked it in." >&4
+ socketlib="-lnet"
+ sockethdr="-I/usr/netinclude"
+ d_socket="$define"
+ if $contains setsockopt libc.list >/dev/null 2>&1; then
+ d_oldsock="$undef"
+ else
+ echo "...using the old 4.1c interface, rather than 4.2" >&4
+ d_oldsock="$define"
+ fi
else
- case "$myhostname" in
- '') echo "Does this machine have an identity crisis or something?"
- phostname='';;
- *)
- echo "Well, you said $myhostname before..."
- phostname='echo $myhostname';;
- esac
+ echo "or even in libnet.a, which is peculiar." >&4
+ d_socket="$undef"
+ d_oldsock="$undef"
fi
+ else
+ echo "or anywhere else I see." >&4
+ d_socket="$undef"
+ d_oldsock="$undef"
fi
fi
-fi
-: you do not want to know about this
-set $myhostname
-myhostname=$1
-
-: verify guess
-if $test "$myhostname" ; then
- dflt=y
- rp='Your host name appears to be "'$myhostname'".'" Right?"
- . ./myread
- case "$ans" in
- y*) ;;
- *) myhostname='';;
- esac
-fi
-
-: bad guess or no guess
-while $test "X$myhostname" = X ; do
- dflt=''
- rp="Please type the (one word) name of your host:"
- . ./myread
- myhostname="$ans"
-done
-
-: translate upper to lower if necessary
-case "$myhostname" in
-*[A-Z]*)
- echo "(Normalizing case in your host name)"
- myhostname=`echo $myhostname | ./tr '[A-Z]' '[a-z]'`
- ;;
-esac
-
-: a little sanity check here
-case "$phostname" in
-'') ;;
-*)
- case `$phostname | ./tr '[A-Z]' '[a-z]'` in
- $myhostname$mydomain|$myhostname) ;;
- *)
- case "$phostname" in
- sed*)
- echo "(That doesn't agree with your whoami.h file, by the way.)"
- ;;
- *)
- echo "(That doesn't agree with your $phostname command, by the way.)"
- ;;
- esac
- ;;
- esac
- ;;
-esac
+fi
-: see how we will look up host name
-echo " "
-if false; then
- : dummy stub to allow use of elif
-elif set uname val -f d_uname; eval $csym; $val; then
- if ./xenix; then
- $cat <<'EOM'
-uname() was found, but you're running xenix, and older versions of xenix
-have a broken uname(). If you don't really know whether your xenix is old
-enough to have a broken system call, use the default answer.
+: see if socketpair exists
+set socketpair d_sockpair
+eval $inlibc
-EOM
- dflt=y
- case "$d_uname" in
- "$define") dflt=n;;
- esac
- rp='Is your uname() broken?'
- . ./myread
- case "$ans" in
- n*) d_uname="$define"; call=uname;;
- esac
+: see if stat knows about block sizes
+echo " "
+xxx=`./findhdr sys/stat.h`
+if $contains 'st_blocks;' "$xxx" >/dev/null 2>&1 ; then
+ if $contains 'st_blksize;' "$xxx" >/dev/null 2>&1 ; then
+ echo "Your stat() knows about block sizes." >&4
+ val="$define"
else
- echo 'uname() found.' >&4
- d_uname="$define"
- call=uname
+ echo "Your stat() doesn't know about block sizes." >&4
+ val="$undef"
fi
+else
+ echo "Your stat() doesn't know about block sizes." >&4
+ val="$undef"
fi
-case "$d_gethname" in
-'') d_gethname="$undef";;
-esac
-case "$d_uname" in
-'') d_uname="$undef";;
-esac
-case "$d_phostname" in
-'') d_phostname="$undef";;
-esac
-
-: backward compatibility for d_hvfork
-if test X$d_hvfork != X; then
- d_vfork="$d_hvfork"
- d_hvfork=''
-fi
-: see if there is a vfork
-val=''
-set vfork val
-eval $inlibc
+set d_statblks
+eval $setvar
-: Ok, but do we want to use it. vfork is reportedly unreliable in
-: perl on Solaris 2.x, and probably elsewhere.
-case "$val" in
-$define)
- echo " "
- case "$usevfork" in
- false) dflt='n';;
- *) dflt='y';;
+: see if _ptr and _cnt from stdio act std
+echo " "
+if $contains '_IO_fpos_t' `./findhdr stdio.h` >/dev/null 2>&1 ; then
+ echo "(Looks like you have stdio.h from Linux.)"
+ case "$stdio_ptr" in
+ '') stdio_ptr='((fp)->_IO_read_ptr)'
+ ptr_lval=$define
+ ;;
+ *) ptr_lval=$d_stdio_ptr_lval;;
esac
- rp="Some systems have problems with vfork(). Do you want to use it?"
- . ./myread
- case "$ans" in
- y|Y) ;;
- *)
- echo "Ok, we won't use vfork()."
- val="$undef"
+ case "$stdio_cnt" in
+ '') stdio_cnt='((fp)->_IO_read_end - (fp)->_IO_read_ptr)'
+ cnt_lval=$undef
;;
+ *) cnt_lval=$d_stdio_cnt_lval;;
esac
- ;;
-esac
-set d_vfork
+ case "$stdio_base" in
+ '') stdio_base='((fp)->_IO_read_base)';;
+ esac
+ case "$stdio_bufsiz" in
+ '') stdio_bufsiz='((fp)->_IO_read_end - (fp)->_IO_read_base)';;
+ esac
+else
+ case "$stdio_ptr" in
+ '') stdio_ptr='((fp)->_ptr)'
+ ptr_lval=$define
+ ;;
+ *) ptr_lval=$d_stdio_ptr_lval;;
+ esac
+ case "$stdio_cnt" in
+ '') stdio_cnt='((fp)->_cnt)'
+ cnt_lval=$define
+ ;;
+ *) cnt_lval=$d_stdio_cnt_lval;;
+ esac
+ case "$stdio_base" in
+ '') stdio_base='((fp)->_base)';;
+ esac
+ case "$stdio_bufsiz" in
+ '') stdio_bufsiz='((fp)->_cnt + (fp)->_ptr - (fp)->_base)';;
+ esac
+fi
+: test whether _ptr and _cnt really work
+echo "Checking how std your stdio is..." >&4
+$cat >try.c <<EOP
+#include <stdio.h>
+#define FILE_ptr(fp) $stdio_ptr
+#define FILE_cnt(fp) $stdio_cnt
+main() {
+ FILE *fp = fopen("try.c", "r");
+ char c = getc(fp);
+ if (
+ 18 <= FILE_cnt(fp) &&
+ strncmp(FILE_ptr(fp), "include <stdio.h>\n", 18) == 0
+ )
+ exit(0);
+ exit(1);
+}
+EOP
+val="$undef"
+if $cc $ccflags $ldflags -o try try.c $libs >/dev/null 2>&1; then
+ if ./try; then
+ echo "Your stdio acts pretty std."
+ val="$define"
+ else
+ echo "Your stdio isn't very std."
+ fi
+else
+ echo "Your stdio doesn't appear very std."
+fi
+$rm -f try.c try
+set d_stdstdio
eval $setvar
-case "$d_vfork" in
-$define) usevfork='true';;
-*) usevfork='false';;
-esac
-
-: see if this is an sysdir system
-set sys/dir.h i_sysdir
-eval $inhdr
-: see if this is an sysndir system
-set sys/ndir.h i_sysndir
-eval $inhdr
-
-: see if closedir exists
-set closedir d_closedir
-eval $inlibc
+: Can _ptr be used as an lvalue?
+case "$d_stdstdio$ptr_lval" in
+$define$define) val=$define ;;
+*) val=$undef ;;
+esac
+set d_stdio_ptr_lval
+eval $setvar
-case "$d_closedir" in
-"$define")
- echo " "
- echo "Checking whether closedir() returns a status..." >&4
- cat > closedir.c <<EOM
-#$i_dirent I_DIRENT /**/
-#$i_sysdir I_SYS_DIR /**/
-#$i_sysndir I_SYS_NDIR /**/
+: Can _cnt be used as an lvalue?
+case "$d_stdstdio$cnt_lval" in
+$define$define) val=$define ;;
+*) val=$undef ;;
+esac
+set d_stdio_cnt_lval
+eval $setvar
-#if defined(I_DIRENT)
-#include <dirent.h>
-#if defined(NeXT) && defined(I_SYS_DIR) /* NeXT needs dirent + sys/dir.h */
-#include <sys/dir.h>
-#endif
-#else
-#ifdef I_SYS_NDIR
-#include <sys/ndir.h>
-#else
-#ifdef I_SYS_DIR
-#ifdef hp9000s500
-#include <ndir.h> /* may be wrong in the future */
-#else
-#include <sys/dir.h>
-#endif
-#endif
-#endif
-#endif
-int main() { return closedir(opendir(".")); }
-EOM
- if $cc $ccflags $ldflags -o closedir closedir.c $libs > /dev/null 2>&1; then
- if ./closedir > /dev/null 2>&1 ; then
- echo "Yes, it does."
- val="$undef"
- else
- echo "No, it doesn't."
+: see if _base is also standard
+val="$undef"
+case "$d_stdstdio" in
+$define)
+ $cat >try.c <<EOP
+#include <stdio.h>
+#define FILE_base(fp) $stdio_base
+#define FILE_bufsiz(fp) $stdio_bufsiz
+main() {
+ FILE *fp = fopen("try.c", "r");
+ char c = getc(fp);
+ if (
+ 19 <= FILE_bufsiz(fp) &&
+ strncmp(FILE_base(fp), "#include <stdio.h>\n", 19) == 0
+ )
+ exit(0);
+ exit(1);
+}
+EOP
+ if $cc $ccflags $ldflags -o try try.c $libs > /dev/null 2>&1; then
+ if ./try; then
+ echo "Even its _base field acts std."
val="$define"
+ else
+ echo "But its _base field isn't std."
fi
else
- echo "(I can't seem to compile the test program--assuming it doesn't)"
- val="$define"
+ echo "However, it seems to be lacking the _base field."
fi
- ;;
-*)
- val="$undef";
+ $rm -f try.c try
;;
esac
-set d_void_closedir
+set d_stdiobase
eval $setvar
-$rm -f closedir*
-: check for volatile keyword
+
+: see if strcoll exists
+set strcoll d_strcoll
+eval $inlibc
+
+: check for structure copying
echo " "
-echo 'Checking to see if your C compiler knows about "volatile"...' >&4
+echo "Checking to see if your C compiler can copy structs..." >&4
$cat >try.c <<'EOCP'
main()
{
- typedef struct _goo_struct goo_struct;
- goo_struct * volatile goo = ((goo_struct *)0);
- struct _goo_struct {
- long long_int;
- int reg_int;
- char char_var;
- };
- typedef unsigned short foo_t;
- char *volatile foo;
- volatile int bar;
- volatile foo_t blech;
- foo = foo;
+ struct blurfl {
+ int dyick;
+ } foo, bar;
+
+ foo = bar;
}
EOCP
-if $cc -c $ccflags try.c >/dev/null 2>&1 ; then
+if $cc -c try.c >/dev/null 2>&1 ; then
val="$define"
- echo "Yup, it does."
+ echo "Yup, it can."
else
val="$undef"
- echo "Nope, it doesn't."
+ echo "Nope, it can't."
fi
-set d_volatile
+set d_strctcpy
eval $setvar
$rm -f try.*
-: see if there is a wait4
-set wait4 d_wait4
+: see if strerror and/or sys_errlist[] exist
+echo " "
+if set strerror val -f d_strerror; eval $csym; $val; then
+ echo 'strerror() found.' >&4
+ d_strerror="$define"
+ d_strerrm='strerror(e)'
+ if set sys_errlist val -a d_syserrlst; eval $csym; $val; then
+ echo "(You also have sys_errlist[], so we could roll our own strerror.)"
+ d_syserrlst="$define"
+ else
+ echo "(Since you don't have sys_errlist[], sterror() is welcome.)"
+ d_syserrlst="$undef"
+ fi
+elif xxx=`./findhdr string.h`; test "$xxx" || xxx=`./findhdr strings.h`; \
+ $contains '#[ ]*define.*strerror' "$xxx" >/dev/null 2>&1; then
+ echo 'strerror() found in string header.' >&4
+ d_strerror="$define"
+ d_strerrm='strerror(e)'
+ if set sys_errlist val -a d_syserrlst; eval $csym; $val; then
+ echo "(Most probably, strerror() uses sys_errlist[] for descriptions.)"
+ d_syserrlst="$define"
+ else
+ echo "(You don't appear to have any sys_errlist[], how can this be?)"
+ d_syserrlst="$undef"
+ fi
+elif set sys_errlist val -a d_syserrlst; eval $csym; $val; then
+echo "strerror() not found, but you have sys_errlist[] so we'll use that." >&4
+ d_strerror="$undef"
+ d_syserrlst="$define"
+ d_strerrm='((e)<0||(e)>=sys_nerr?"unknown":sys_errlist[e])'
+else
+ echo 'strerror() and sys_errlist[] NOT found.' >&4
+ d_strerror="$undef"
+ d_syserrlst="$undef"
+ d_strerrm='"unknown"'
+fi
+
+: see if strxfrm exists
+set strxfrm d_strxfrm
+eval $inlibc
+
+: see if symlink exists
+set symlink d_symlink
+eval $inlibc
+
+: see if syscall exists
+set syscall d_syscall
eval $inlibc
-: see if waitpid exists
-set waitpid d_waitpid
+: see if sysconf exists
+set sysconf d_sysconf
eval $inlibc
-: see if wcstombs exists
-set wcstombs d_wcstombs
+: see if system exists
+set system d_system
eval $inlibc
-: see if wctomb exists
-set wctomb d_wctomb
+: see if tcgetpgrp exists
+set tcgetpgrp d_tcgetpgrp
eval $inlibc
-: preserve RCS keywords in files with variable substitution, grrr
-Date='$Date'
-Id='$Id'
-Log='$Log'
-RCSfile='$RCSfile'
-Revision='$Revision'
+: see if tcsetpgrp exists
+set tcsetpgrp d_tcsetpgrp
+eval $inlibc
-: check for alignment requirements
-echo " "
-case "$alignbytes" in
-'') echo "Checking alignment constraints..." >&4
- $cat >try.c <<'EOCP'
-struct foobar {
- char foo;
- double bar;
-} try;
-main()
-{
- printf("%d\n", (char *)&try.bar - (char *)&try.foo);
-}
-EOCP
- if $cc $ccflags try.c -o try >/dev/null 2>&1; then
- dflt=`./try`
+: define an is-a-typedef? function
+typedef='type=$1; var=$2; def=$3; shift; shift; shift; inclist=$@;
+case "$inclist" in
+"") inclist="sys/types.h";;
+esac;
+eval "varval=\$$var";
+case "$varval" in
+"")
+ $rm -f temp.c;
+ for inc in $inclist; do
+ echo "#include <$inc>" >>temp.c;
+ done;
+ $cppstdin $cppflags $cppminus < temp.c >temp.E 2>/dev/null;
+ if $contains $type temp.E >/dev/null 2>&1; then
+ eval "$var=\$type";
else
- dflt='8'
- echo"(I can't seem to compile the test program...)"
- fi
- ;;
-*) dflt="$alignbytes"
- ;;
-esac
-rp="Doubles must be aligned on a how-many-byte boundary?"
-. ./myread
-alignbytes="$ans"
-$rm -f try.c try
+ eval "$var=\$def";
+ fi;
+ $rm -f temp.?;;
+*) eval "$var=\$varval";;
+esac'
-: determine where public executables go
+: see if this is a sys/times.h system
+set sys/times.h i_systimes
+eval $inhdr
+
+: see if times exists
echo " "
-set dflt bin bin
-eval $prefixit
-fn=d~
-rp='Pathname where the public executables will reside?'
-. ./getfile
-if $test "X$ansexp" != "X$binexp"; then
- installbin=''
+if set times val -f d_times; eval $csym; $val; then
+ echo 'times() found.' >&4
+ d_times="$define"
+ inc=''
+ case "$i_systimes" in
+ "$define") inc='sys/times.h';;
+ esac
+ set clock_t clocktype long stdio.h sys/types.h $inc
+ eval $typedef
+ dflt="$clocktype"
+ echo " "
+ rp="What type is returned by times() on this system?"
+ . ./myread
+ clocktype="$ans"
+else
+ echo 'times() NOT found, hope that will do.' >&4
+ d_times="$undef"
+ clocktype='int'
fi
-bin="$ans"
-binexp="$ansexp"
-if $afs; then
- $cat <<EOM
-Since you are running AFS, I need to distinguish the directory in which
-executables reside from the directory in which they are installed (and from
-which they are presumably copied to the former directory by occult means).
+: see if truncate exists
+set truncate d_truncate
+eval $inlibc
-EOM
- case "$installbin" in
- '') dflt=`echo $binexp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installbin";;
- esac
- fn=de~
- rp='Where will public executables be installed?'
- . ./getfile
- installbin="$ans"
+: see if tzname[] exists
+echo " "
+if set tzname val -a d_tzname; eval $csym; $val; then
+ val="$define"
+ echo 'tzname[] found.' >&4
else
- installbin="$binexp"
+ val="$undef"
+ echo 'tzname[] NOT found.' >&4
fi
+set d_tzname
+eval $setvar
-: check for ordering of bytes in a long
-case "$byteorder" in
-'')
- $cat <<'EOM'
-
-In the following, larger digits indicate more significance. A big-endian
-machine like a Pyramid or a Motorola 680?0 chip will come out to 4321. A
-little-endian machine like a Vax or an Intel 80?86 chip would be 1234. Other
-machines may have weird orders like 3412. A Cray will report 87654321. If
-the test program works the default is probably right.
-I'm now running the test program...
-EOM
- $cat >try.c <<'EOCP'
-#include <stdio.h>
-main()
-{
- int i;
- union {
- unsigned long l;
- char c[sizeof(long)];
- } u;
+: see if umask exists
+set umask d_umask
+eval $inlibc
- if (sizeof(long) > 4)
- u.l = (0x08070605L << 32) | 0x04030201L;
- else
- u.l = 0x04030201L;
- for (i = 0; i < sizeof(long); i++)
- printf("%c", u.c[i]+'0');
- printf("\n");
-}
-EOCP
- if $cc $ccflags try.c -o try >/dev/null 2>&1 ; then
- dflt=`./try`
- case "$dflt" in
- ????|????????) echo "(The test program ran ok.)";;
- *) echo "(The test program didn't run right for some reason.)";;
+: see how we will look up host name
+echo " "
+if false; then
+ : dummy stub to allow use of elif
+elif set uname val -f d_uname; eval $csym; $val; then
+ if ./xenix; then
+ $cat <<'EOM'
+uname() was found, but you're running xenix, and older versions of xenix
+have a broken uname(). If you don't really know whether your xenix is old
+enough to have a broken system call, use the default answer.
+
+EOM
+ dflt=y
+ case "$d_uname" in
+ "$define") dflt=n;;
+ esac
+ rp='Is your uname() broken?'
+ . ./myread
+ case "$ans" in
+ n*) d_uname="$define"; call=uname;;
esac
else
- dflt='4321'
- cat <<'EOM'
-(I can't seem to compile the test program. Guessing big-endian...)
-EOM
+ echo 'uname() found.' >&4
+ d_uname="$define"
+ call=uname
fi
- ;;
-*)
- echo " "
- dflt="$byteorder"
- ;;
+fi
+case "$d_gethname" in
+'') d_gethname="$undef";;
+esac
+case "$d_uname" in
+'') d_uname="$undef";;
+esac
+case "$d_phostname" in
+'') d_phostname="$undef";;
esac
-rp="What is the order of bytes in a long?"
-. ./myread
-byteorder="$ans"
-$rm -f try.c try
-: how do we catenate cpp tokens here?
-echo " "
-echo "Checking to see how your cpp does stuff like catenate tokens..." >&4
-$cat >cpp_stuff.c <<'EOCP'
-#define RCAT(a,b)a/**/b
-#define ACAT(a,b)a ## b
-RCAT(Rei,ser)
-ACAT(Cir,cus)
-EOCP
-$cppstdin $cppflags $cppminus <cpp_stuff.c >cpp_stuff.out 2>&1
-if $contains 'Circus' cpp_stuff.out >/dev/null 2>&1; then
- echo "Oh! Smells like ANSI's been here."
- echo "We can catify or stringify, separately or together!"
- cpp_stuff=42
-elif $contains 'Reiser' cpp_stuff.out >/dev/null 2>&1; then
- echo "Ah, yes! The good old days!"
- echo "However, in the good old days we don't know how to stringify and"
- echo "catify at the same time."
- cpp_stuff=1
-else
- $cat >&4 <<EOM
-Hmm, I don't seem to be able to catenate tokens with your cpp. You're going
-to have to edit the values of CAT[2-5] in config.h...
-EOM
- cpp_stuff="/* Help! How do we handle cpp_stuff? */*/"
+: backward compatibility for d_hvfork
+if test X$d_hvfork != X; then
+ d_vfork="$d_hvfork"
+ d_hvfork=''
fi
-$rm -f cpp_stuff.*
+: see if there is a vfork
+val=''
+set vfork val
+eval $inlibc
+
+: Ok, but do we want to use it. vfork is reportedly unreliable in
+: perl on Solaris 2.x, and probably elsewhere.
+case "$val" in
+$define)
+ echo " "
+ case "$usevfork" in
+ false) dflt='n';;
+ *) dflt='y';;
+ esac
+ rp="Some systems have problems with vfork(). Do you want to use it?"
+ . ./myread
+ case "$ans" in
+ y|Y) ;;
+ *)
+ echo "Ok, we won't use vfork()."
+ val="$undef"
+ ;;
+ esac
+ ;;
+esac
+set d_vfork
+eval $setvar
+case "$d_vfork" in
+$define) usevfork='true';;
+*) usevfork='false';;
+esac
-: see if this is a db.h system
-set db.h i_db
+: see if this is an sysdir system
+set sys/dir.h i_sysdir
eval $inhdr
-case "$i_db" in
-define)
- : Check the return type needed for hash
- echo "Checking return type needed for hash for Berkeley DB ..." >&4
- cat >try.c <<'EOCP'
-#include <sys/types.h>
-#include <db.h>
-u_int32_t
-hash_cb (ptr, size)
-const void * ptr ;
-size_t size ;
-{
-}
-HASHINFO info ;
-main()
-{
- info.hash = hash_cb ;
-}
-EOCP
- if $cc $ccflags -c try.c >try.out 2>&1 ; then
- if $contains warning try.out >>/dev/null 2>&1 ; then
- db_hashtype='int'
+: see if this is an sysndir system
+set sys/ndir.h i_sysndir
+eval $inhdr
+
+: see if closedir exists
+set closedir d_closedir
+eval $inlibc
+
+case "$d_closedir" in
+"$define")
+ echo " "
+ echo "Checking whether closedir() returns a status..." >&4
+ cat > closedir.c <<EOM
+#$i_dirent I_DIRENT /**/
+#$i_sysdir I_SYS_DIR /**/
+#$i_sysndir I_SYS_NDIR /**/
+
+#if defined(I_DIRENT)
+#include <dirent.h>
+#if defined(NeXT) && defined(I_SYS_DIR) /* NeXT needs dirent + sys/dir.h */
+#include <sys/dir.h>
+#endif
+#else
+#ifdef I_SYS_NDIR
+#include <sys/ndir.h>
+#else
+#ifdef I_SYS_DIR
+#ifdef hp9000s500
+#include <ndir.h> /* may be wrong in the future */
+#else
+#include <sys/dir.h>
+#endif
+#endif
+#endif
+#endif
+int main() { return closedir(opendir(".")); }
+EOM
+ if $cc $ccflags $ldflags -o closedir closedir.c $libs > /dev/null 2>&1; then
+ if ./closedir > /dev/null 2>&1 ; then
+ echo "Yes, it does."
+ val="$undef"
else
- db_hashtype='u_int32_t'
+ echo "No, it doesn't."
+ val="$define"
fi
else
- echo "I can't seem to compile the test program." >&4
- db_hashtype=int
+ echo "(I can't seem to compile the test program--assuming it doesn't)"
+ val="$define"
fi
- $rm -f try.[co]
- echo "Your version of Berkeley DB uses $db_hashtype for hash."
;;
-*) db_hashtype=int
+*)
+ val="$undef";
;;
esac
-
-case "$i_db" in
-define)
- : Check the return type needed for prefix
- echo "Checking return type needed for prefix for Berkeley DB ..." >&4
- cat >try.c <<'EOCP'
-#include <sys/types.h>
-#include <db.h>
-size_t
-prefix_cb (key1, key2)
-const DBT * key1 ;
-const DBT * key2 ;
-{
-}
-BTREEINFO info ;
+set d_void_closedir
+eval $setvar
+$rm -f closedir*
+: check for volatile keyword
+echo " "
+echo 'Checking to see if your C compiler knows about "volatile"...' >&4
+$cat >try.c <<'EOCP'
main()
{
- info.prefix = prefix_cb ;
+ typedef struct _goo_struct goo_struct;
+ goo_struct * volatile goo = ((goo_struct *)0);
+ struct _goo_struct {
+ long long_int;
+ int reg_int;
+ char char_var;
+ };
+ typedef unsigned short foo_t;
+ char *volatile foo;
+ volatile int bar;
+ volatile foo_t blech;
+ foo = foo;
}
EOCP
- if $cc $ccflags -c try.c >try.out 2>&1 ; then
- if $contains warning try.out >>/dev/null 2>&1 ; then
- db_prefixtype='int'
- else
- db_prefixtype='size_t'
- fi
- else
- echo "I can't seem to compile the test program." >&4
- db_prefixtype='int'
- fi
- $rm -f try.[co]
- echo "Your version of Berkeley DB uses $db_prefixtype for prefix."
- ;;
-*) db_prefixtype='int'
- ;;
-esac
+if $cc -c $ccflags try.c >/dev/null 2>&1 ; then
+ val="$define"
+ echo "Yup, it does."
+else
+ val="$undef"
+ echo "Nope, it doesn't."
+fi
+set d_volatile
+eval $setvar
+$rm -f try.*
-: check for void type
-echo " "
-echo "Checking to see how well your C compiler groks the void type..." >&4
-echo " "
-$cat >&4 <<EOM
- Support flag bits are:
- 1: basic void declarations.
- 2: arrays of pointers to functions returning void.
- 4: operations between pointers to and addresses of void functions.
- 8: generic void pointers.
-EOM
+: see if there is a wait4
+set wait4 d_wait4
+eval $inlibc
+
+: see if waitpid exists
+set waitpid d_waitpid
+eval $inlibc
+
+: see if wcstombs exists
+set wcstombs d_wcstombs
+eval $inlibc
+
+: see if wctomb exists
+set wctomb d_wctomb
+eval $inlibc
+
+: preserve RCS keywords in files with variable substitution, grrr
+Date='$Date'
+Id='$Id'
+Log='$Log'
+RCSfile='$RCSfile'
+Revision='$Revision'
+
+: check for alignment requirements
echo " "
-case "$voidflags" in
-'')
+case "$alignbytes" in
+'') echo "Checking alignment constraints..." >&4
$cat >try.c <<'EOCP'
-#if TRY & 1
-void main() {
-#else
-main() {
-#endif
- extern void moo(); /* function returning void */
- void (*goo)(); /* ptr to func returning void */
-#if TRY & 8
- void *hue; /* generic ptr */
-#endif
-#if TRY & 2
- void (*foo[10])();
-#endif
-
-#if TRY & 4
- if(goo == moo) {
- exit(0);
- }
-#endif
- exit(0);
+struct foobar {
+ char foo;
+ double bar;
+} try;
+main()
+{
+ printf("%d\n", (char *)&try.bar - (char *)&try.foo);
}
EOCP
- if $cc -c -DTRY=$defvoidused try.c >.out 2>&1 ; then
- voidflags=$defvoidused
- echo "It appears to support void to the level $package wants ($defvoidused)."
- if $contains warning .out >/dev/null 2>&1; then
- echo "However, you might get some warnings that look like this:"
- $cat .out
- fi
- else
-echo "Hmm, your compiler has some difficulty with void. Checking further..." >&4
- if $cc -c -DTRY=1 try.c >/dev/null 2>&1 ; then
- echo "It supports 1..."
- if $cc -c -DTRY=3 try.c >/dev/null 2>&1 ; then
- echo "It also supports 2..."
- if $cc -c -DTRY=7 try.c >/dev/null 2>&1 ; then
- voidflags=7
- echo "And it supports 4 but not 8 definitely."
- else
- echo "It doesn't support 4..."
- if $cc -c -DTRY=11 try.c >/dev/null 2>&1 ; then
- voidflags=11
- echo "But it supports 8."
- else
- voidflags=3
- echo "Neither does it support 8."
- fi
- fi
- else
- echo "It does not support 2..."
- if $cc -c -DTRY=13 try.c >/dev/null 2>&1 ; then
- voidflags=13
- echo "But it supports 4 and 8."
- else
- if $cc -c -DTRY=5 try.c >/dev/null 2>&1 ; then
- voidflags=5
- echo "And it supports 4 but has not heard about 8."
- else
- echo "However it supports 8 but not 4."
- fi
- fi
- fi
- else
- echo "There is no support at all for void."
- voidflags=0
- fi
- fi
-esac
-dflt="$voidflags";
-rp="Your void support flags add up to what?"
-. ./myread
-voidflags="$ans"
-$rm -f try.* .out
-
-: see if dbm.h is available
-set dbm.h t_dbm
-eval $inhdr
-case "$t_dbm" in
-$define)
- : see if dbmclose exists
- set dbmclose d_dbmclose
- eval $inlibc
- case "$d_dbmclose" in
- $undef)
- t_dbm="$undef"
- echo "We won't be including <dbm.h>"
- ;;
- esac
+ if $cc $ccflags try.c -o try >/dev/null 2>&1; then
+ dflt=`./try`
+ else
+ dflt='8'
+ echo"(I can't seem to compile the test program...)"
+ fi
+ ;;
+*) dflt="$alignbytes"
;;
esac
-val="$t_dbm"
-set i_dbm
-eval $setvar
+rp="Doubles must be aligned on a how-many-byte boundary?"
+. ./myread
+alignbytes="$ans"
+$rm -f try.c try
-: see if ndbm.h is available
-set ndbm.h t_ndbm
-eval $inhdr
-case "$t_ndbm" in
-$define)
- : see if dbm_open exists
- set dbm_open d_dbm_open
- eval $inlibc
- case "$d_dbm_open" in
- $undef)
- t_ndbm="$undef"
- echo "We won't be including <ndbm.h>"
- ;;
- esac
- ;;
+: Define several unixisms. Hints files or command line options
+: can be used to override them.
+case "$ar" in
+'') ar='ar';;
+esac
+case "$lib_ext" in
+'') lib_ext='.a';;
+esac
+case "$obj_ext" in
+'') obj_ext='.o';;
+esac
+case "$path_sep" in
+'') path_sep=':';;
+esac
+: Which makefile gets called first. This is used by make depend.
+case "$firstmakefile" in
+'') firstmakefile='makefile';;
esac
-val="$t_ndbm"
-set i_ndbm
-eval $setvar
-: see if gdbm.h is available
-set gdbm.h t_gdbm
-eval $inhdr
-case "$t_gdbm" in
-$define)
- : see if gdbm_open exists
- set gdbm_open d_gdbm_open
- eval $inlibc
- case "$d_gdbm_open" in
- $undef)
- t_gdbm="$undef"
- echo "We won't be including <gdbm.h>"
+: check for ordering of bytes in a long
+case "$byteorder" in
+'')
+ $cat <<'EOM'
+
+In the following, larger digits indicate more significance. A big-endian
+machine like a Pyramid or a Motorola 680?0 chip will come out to 4321. A
+little-endian machine like a Vax or an Intel 80?86 chip would be 1234. Other
+machines may have weird orders like 3412. A Cray will report 87654321. If
+the test program works the default is probably right.
+I'm now running the test program...
+EOM
+ $cat >try.c <<'EOCP'
+#include <stdio.h>
+main()
+{
+ int i;
+ union {
+ unsigned long l;
+ char c[sizeof(long)];
+ } u;
+
+ if (sizeof(long) > 4)
+ u.l = (0x08070605L << 32) | 0x04030201L;
+ else
+ u.l = 0x04030201L;
+ for (i = 0; i < sizeof(long); i++)
+ printf("%c", u.c[i]+'0');
+ printf("\n");
+ exit(0);
+}
+EOCP
+ xxx_prompt=y
+ if $cc $ccflags try.c -o try >/dev/null 2>&1 && ./try > /dev/null; then
+ dflt=`./try`
+ case "$dflt" in
+ [1-4][1-4][1-4][1-4]|12345678|87654321)
+ echo "(The test program ran ok.)"
+ echo "byteorder=$dflt"
+ xxx_prompt=n
+ ;;
+ ????|????????) echo "(The test program ran ok.)" ;;
+ *) echo "(The test program didn't run right for some reason.)" ;;
+ esac
+ else
+ dflt='4321'
+ cat <<'EOM'
+(I can't seem to compile the test program. Guessing big-endian...)
+EOM
+ fi
+ case "$xxx_prompt" in
+ y)
+ rp="What is the order of bytes in a long?"
+ . ./myread
+ byteorder="$ans"
+ ;;
+ *) byteorder=$dflt
;;
esac
;;
esac
-val="$t_gdbm"
-set i_gdbm
-eval $setvar
+$rm -f try.c try
+: how do we catenate cpp tokens here?
echo " "
-echo "Looking for extensions..." >&4
-cd ../ext
-: If we are using the old config.sh, known_extensions may contain
-: old or inaccurate or duplicate values.
-known_extensions=''
-: We do not use find because it might not be available.
-: We do not just use MANIFEST because the user may have dropped
-: some additional extensions into the source tree and expect them
-: to be built.
-for xxx in * ; do
- if $test -f $xxx/$xxx.xs; then
- known_extensions="$known_extensions $xxx"
- else
- if $test -d $xxx; then
- cd $xxx
- for yyy in * ; do
- if $test -f $yyy/$yyy.xs; then
- known_extensions="$known_extensions $xxx/$yyy"
- fi
- done
- cd ..
- fi
- fi
-done
-set X $known_extensions
-shift
-known_extensions="$*"
-cd ../UU
-
-: Now see which are supported on this system.
-avail_ext=''
-for xxx in $known_extensions ; do
- case "$xxx" in
- DB_File) case "$i_db" in
- $define) avail_ext="$avail_ext $xxx" ;;
- esac
- ;;
- GDBM_File) case "$i_gdbm" in
- $define) avail_ext="$avail_ext $xxx" ;;
- esac
- ;;
- NDBM_File) case "$i_ndbm" in
- $define) avail_ext="$avail_ext $xxx" ;;
- esac
- ;;
- ODBM_File) case "$i_dbm" in
- $define) avail_ext="$avail_ext $xxx" ;;
- esac
- ;;
- POSIX) case "$useposix" in
- true|define|y) avail_ext="$avail_ext $xxx" ;;
- esac
- ;;
- Socket) case "$d_socket" in
- $define) avail_ext="$avail_ext $xxx" ;;
- esac
- ;;
- *) avail_ext="$avail_ext $xxx"
- ;;
- esac
-done
-
-set X $avail_ext
-shift
-avail_ext="$*"
-
-case $usedl in
-$define)
- $cat <<EOM
-A number of extensions are supplied with $package. You may choose to
-compile these extensions for dynamic loading (the default), compile
-them into the $package executable (static loading), or not include
-them at all. Answer "none" to include no extensions.
-
+echo "Checking to see how your cpp does stuff like catenate tokens..." >&4
+$cat >cpp_stuff.c <<'EOCP'
+#define RCAT(a,b)a/**/b
+#define ACAT(a,b)a ## b
+RCAT(Rei,ser)
+ACAT(Cir,cus)
+EOCP
+$cppstdin $cppflags $cppminus <cpp_stuff.c >cpp_stuff.out 2>&1
+if $contains 'Circus' cpp_stuff.out >/dev/null 2>&1; then
+ echo "Oh! Smells like ANSI's been here."
+ echo "We can catify or stringify, separately or together!"
+ cpp_stuff=42
+elif $contains 'Reiser' cpp_stuff.out >/dev/null 2>&1; then
+ echo "Ah, yes! The good old days!"
+ echo "However, in the good old days we don't know how to stringify and"
+ echo "catify at the same time."
+ cpp_stuff=1
+else
+ $cat >&4 <<EOM
+Hmm, I don't seem to be able to catenate tokens with your cpp. You're going
+to have to edit the values of CAT[2-5] in config.h...
EOM
- case "$dynamic_ext" in
- ''|' ') dflt="$avail_ext" ;;
- *) dflt="$dynamic_ext" ;;
- esac
- case "$dflt" in
- '') dflt=none;;
- esac
- rp="What extensions do you wish to load dynamically?"
- . ./myread
- case "$ans" in
- none) dynamic_ext='' ;;
- *) dynamic_ext="$ans" ;;
- esac
+ cpp_stuff="/* Help! How do we handle cpp_stuff? */*/"
+fi
+$rm -f cpp_stuff.*
- case "$static_ext" in
- ''|' ')
- : Exclude those already listed in dynamic linking
- dflt=''
- for xxx in $avail_ext; do
- case " $dynamic_ext " in
- *" $xxx "*) ;;
- *) dflt="$dflt $xxx" ;;
- esac
- done
- set X $dflt
- shift
- dflt="$*"
- ;;
- *) dflt="$static_ext"
- ;;
- esac
+: see if this is a db.h system
+set db.h i_db
+eval $inhdr
- case "$dflt" in
- '') dflt=none;;
- esac
- rp="What extensions do you wish to load statically?"
- . ./myread
- case "$ans" in
- none) static_ext='' ;;
- *) static_ext="$ans" ;;
- esac
+case "$i_db" in
+define)
+ : Check the return type needed for hash
+ echo " "
+ echo "Checking return type needed for hash for Berkeley DB ..." >&4
+ $cat >try.c <<EOCP
+#$d_const HASCONST
+#ifndef HASCONST
+#define const
+#endif
+#include <sys/types.h>
+#include <db.h>
+u_int32_t hash_cb (ptr, size)
+const void *ptr;
+size_t size;
+{
+}
+HASHINFO info;
+main()
+{
+ info.hash = hash_cb;
+}
+EOCP
+ if $cc $ccflags -c try.c >try.out 2>&1 ; then
+ if $contains warning try.out >>/dev/null 2>&1 ; then
+ db_hashtype='int'
+ else
+ db_hashtype='u_int32_t'
+ fi
+ else
+ echo "I can't seem to compile the test program." >&4
+ db_hashtype=int
+ fi
+ $rm -f try.*
+ echo "Your version of Berkeley DB uses $db_hashtype for hash."
;;
-*)
- $cat <<EOM
-A number of extensions are supplied with $package. Answer "none"
-to include no extensions.
+*) db_hashtype=int
+ ;;
+esac
+
+case "$i_db" in
+define)
+ : Check the return type needed for prefix
+ echo " "
+ echo "Checking return type needed for prefix for Berkeley DB ..." >&4
+ cat >try.c <<EOCP
+#$d_const HASCONST
+#ifndef HASCONST
+#define const
+#endif
+#include <sys/types.h>
+#include <db.h>
+size_t prefix_cb (key1, key2)
+const DBT *key1;
+const DBT *key2;
+{
+}
+BTREEINFO info;
+main()
+{
+ info.prefix = prefix_cb;
+}
+EOCP
+ if $cc $ccflags -c try.c >try.out 2>&1 ; then
+ if $contains warning try.out >>/dev/null 2>&1 ; then
+ db_prefixtype='int'
+ else
+ db_prefixtype='size_t'
+ fi
+ else
+ echo "I can't seem to compile the test program." >&4
+ db_prefixtype='int'
+ fi
+ $rm -f try.*
+ echo "Your version of Berkeley DB uses $db_prefixtype for prefix."
+ ;;
+*) db_prefixtype='int'
+ ;;
+esac
+: check for void type
+echo " "
+echo "Checking to see how well your C compiler groks the void type..." >&4
+echo " "
+$cat >&4 <<EOM
+ Support flag bits are:
+ 1: basic void declarations.
+ 2: arrays of pointers to functions returning void.
+ 4: operations between pointers to and addresses of void functions.
+ 8: generic void pointers.
EOM
- case "$static_ext" in
- ''|' ') dflt="$avail_ext" ;;
- *) dflt="$static_ext" ;;
- esac
+echo " "
+case "$voidflags" in
+'')
+ $cat >try.c <<'EOCP'
+#if TRY & 1
+void main() {
+#else
+main() {
+#endif
+ extern void moo(); /* function returning void */
+ void (*goo)(); /* ptr to func returning void */
+#if TRY & 8
+ void *hue; /* generic ptr */
+#endif
+#if TRY & 2
+ void (*foo[10])();
+#endif
- case "$dflt" in
- '') dflt=none;;
- esac
- rp="What extensions do you wish to include?"
+#if TRY & 4
+ if(goo == moo) {
+ exit(0);
+ }
+#endif
+ exit(0);
+}
+EOCP
+ if $cc -c -DTRY=$defvoidused try.c >.out 2>&1 ; then
+ voidflags=$defvoidused
+ echo "It appears to support void to the level $package wants ($defvoidused)."
+ if $contains warning .out >/dev/null 2>&1; then
+ echo "However, you might get some warnings that look like this:"
+ $cat .out
+ fi
+ else
+echo "Hmm, your compiler has some difficulty with void. Checking further..." >&4
+ if $cc -c -DTRY=1 try.c >/dev/null 2>&1 ; then
+ echo "It supports 1..."
+ if $cc -c -DTRY=3 try.c >/dev/null 2>&1 ; then
+ echo "It also supports 2..."
+ if $cc -c -DTRY=7 try.c >/dev/null 2>&1 ; then
+ voidflags=7
+ echo "And it supports 4 but not 8 definitely."
+ else
+ echo "It doesn't support 4..."
+ if $cc -c -DTRY=11 try.c >/dev/null 2>&1 ; then
+ voidflags=11
+ echo "But it supports 8."
+ else
+ voidflags=3
+ echo "Neither does it support 8."
+ fi
+ fi
+ else
+ echo "It does not support 2..."
+ if $cc -c -DTRY=13 try.c >/dev/null 2>&1 ; then
+ voidflags=13
+ echo "But it supports 4 and 8."
+ else
+ if $cc -c -DTRY=5 try.c >/dev/null 2>&1 ; then
+ voidflags=5
+ echo "And it supports 4 but has not heard about 8."
+ else
+ echo "However it supports 8 but not 4."
+ fi
+ fi
+ fi
+ else
+ echo "There is no support at all for void."
+ voidflags=0
+ fi
+ fi
+esac
+: Only prompt user if support does not match the level we want
+case "$voidflags" in
+"$defvoidused") ;;
+*)
+ dflt="$voidflags";
+ rp="Your void support flags add up to what?"
. ./myread
- case "$ans" in
- none) static_ext='' ;;
- *) static_ext="$ans" ;;
- esac
+ voidflags="$ans"
;;
esac
-
-set X $dynamic_ext $static_ext
-shift
-extensions="$*"
+$rm -f try.* .out
: see what type file positions are declared as in the library
set fpos_t fpostype long stdio.h sys/types.h
. ./myread
lseektype="$ans"
-: determine where manual pages go
-set mansrc mansrc none
-eval $prefixit
-$cat <<EOM
-
-$spackage has manual pages available in source form.
-EOM
-case "$nroff" in
-nroff)
- echo "However, you don't have nroff, so they're probably useless to you."
- case "$mansrc" in
- '') mansrc="none";;
- esac;;
-esac
-echo "If you don't want the manual sources installed, answer 'none'."
-case "$mansrc" in
-'')
- lookpath="$prefixexp/man/man1 $prefixexp/man/u_man/man1"
- lookpath="$lookpath $prefixexp/man/l_man/man1"
- lookpath="$lookpath /usr/local/man/man1 /opt/man/man1 /usr/man/manl"
- lookpath="$lookpath /usr/man/local/man1 /usr/man/l_man/man1"
- lookpath="$lookpath /usr/local/man/u_man/man1 /usr/local/man/l_man/man1"
- lookpath="$lookpath /usr/man/man.L"
- mansrc=`./loc . $prefixexp/man/man1 $lookpath`
- if $test -d "$mansrc"; then
- dflt="$mansrc"
- else
- dflt="$sysman"
- fi
- set dflt
- eval $prefixup
- ;;
-' ') dflt=none;;
-*) dflt="$mansrc"
- ;;
-esac
-echo " "
-fn=dn~
-rp='Where do the manual pages (source) go?'
-. ./getfile
-if test "X$mansrcexp" != "X$ansexp"; then
- installmansrc=''
-fi
-mansrc="$ans"
-mansrcexp="$ansexp"
-case "$mansrc" in
-'') mansrc=' '
- installmansrc='';;
-esac
-if $afs; then
- $cat <<EOM
-
-Since you are running AFS, I need to distinguish the directory in which
-manual pages reside from the directory in which they are installed (and from
-which they are presumably copied to the former directory by occult means).
-
-EOM
- case "$installmansrc" in
- '') dflt=`echo $mansrcexp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installmansrc";;
- esac
- fn=de~
- rp='Where will man pages be installed?'
- . ./getfile
- installmansrc="$ans"
-else
- installmansrc="$mansrcexp"
-fi
-
-case "$mansrc" in
-' ') manext='0';;
-*l) manext=l;;
-*n) manext=n;;
-*o) manext=l;;
-*p) manext=n;;
-*C) manext=C;;
-*L) manext=L;;
-*L1) manext=L1;;
-*) manext=1;;
-esac
-
: see what type is used for mode_t
set mode_t modetype int stdio.h sys/types.h
eval $typedef
. ./myread
modetype="$ans"
-: set the base revision
-baserev=5.0
-
-: get the patchlevel
+: locate the preferred pager for this system
+case "$pager" in
+'')
+ dflt=''
+ case "$pg" in
+ /*) dflt=$pg;;
+ esac
+ case "$more" in
+ /*) dflt=$more;;
+ esac
+ case "$less" in
+ /*) dflt=$less;;
+ esac
+ case "$dflt" in
+ '') dflt=/usr/ucb/more;;
+ esac
+ ;;
+*) dflt="$pager";;
+esac
echo " "
-echo "Getting the current patchlevel..." >&4
-if $test -r ../patchlevel.h;then
- patchlevel=`awk '/PATCHLEVEL/ {print $3}' < ../patchlevel.h`
-else
- patchlevel=0
-fi
-echo "(You have $package $baserev PL$patchlevel.)"
+fn=f/
+rp='What pager is used on your system?'
+. ./getfile
+pager="$ans"
: Cruising for prototypes
echo " "
fi
$rm -f foo* bar*
-: determine where public executable scripts go
-set scriptdir scriptdir
-eval $prefixit
-case "$scriptdir" in
-'')
- dflt="$bin"
- : guess some guesses
- $test -d /usr/share/scripts && dflt=/usr/share/scripts
- $test -d /usr/share/bin && dflt=/usr/share/bin
- $test -d /usr/local/script && dflt=/usr/local/script
- $test -d $prefixexp/script && dflt=$prefixexp/script
- set dflt
- eval $prefixup
- ;;
-*) dflt="$scriptdir"
- ;;
-esac
-$cat <<EOM
-
-Some installations have a separate directory just for executable scripts so
-that they can mount it across multiple architectures but keep the scripts in
-one spot. You might, for example, have a subdirectory of /usr/share for this.
-Or you might just lump your scripts in with all your other executables.
-
-EOM
-fn=d~
-rp='Where do you keep publicly executable scripts?'
-. ./getfile
-if $test "X$ansexp" != "X$scriptdirexp"; then
- installscript=''
-fi
-scriptdir="$ans"
-scriptdirexp="$ansexp"
-if $afs; then
- $cat <<EOM
-
-Since you are running AFS, I need to distinguish the directory in which
-scripts reside from the directory in which they are installed (and from
-which they are presumably copied to the former directory by occult means).
-
-EOM
- case "$installscript" in
- '') dflt=`echo $scriptdirexp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installscript";;
- esac
- fn=de~
- rp='Where will public scripts be installed?'
- . ./getfile
- installscript="$ans"
-else
- installscript="$scriptdirexp"
-fi
-
: see if sys/select.h has to be included
set sys/select.h i_sysselct
eval $inhdr
}
EOCP
flags=''
-s_timezone=''
+for s_timezone in '-DS_TIMEZONE' ''; do
sysselect=''
for s_timeval in '-DS_TIMEVAL' ''; do
for i_systimek in '' '-DSYSTIMEKERNEL'; do
done
done
done
+done
timeincl=''
echo " "
case "$flags" in
fi
$rm -f try.[co]
;;
-*) selecttype = 'int *'
+*) selecttype='int *'
;;
esac
-
-: generate list of signal names
-echo " "
-case "$sig_name" in
-'')
- echo "Generating a list of signal names..." >&4
- xxx=`./findhdr signal.h`" "`./findhdr sys/signal.h`" "`./findhdr linux/signal.h`
- set X `cat $xxx 2>&1 | $awk '
-$1 ~ /^#define$/ && $2 ~ /^SIG[A-Z0-9]*$/ && $3 ~ /^[1-9][0-9]*$/ {
- sig[$3] = substr($2,4,20)
- if (max < $3 && $3 < 60) {
- max = $3
- }
+
+: Trace out the files included by signal.h, then look for SIGxxx names.
+: Remove SIGARRAYSIZE used by HPUX.
+: Remove SIGTYP void lines used by OS2.
+xxx=`echo '#include <signal.h>' |
+ $cppstdin $cppminus $cppflags 2>/dev/null |
+ $grep '^[ ]*#.*include' |
+ $awk "{print \\$$fieldn}" | $sed 's!"!!g' | $sort | $uniq`
+: Check this list of files to be sure we have parsed the cpp output ok.
+: This will also avoid potentially non-existent files, such
+: as ../foo/bar.h
+xxxfiles=''
+for xx in $xxx /dev/null ; do
+ $test -f "$xx" && xxxfiles="$xxxfiles $xx"
+done
+: If we have found no files, at least try signal.h
+case "$xxxfiles" in
+'') xxxfiles=`./findhdr signal.h` ;;
+esac
+xxx=`awk '
+$1 ~ /^#define$/ && $2 ~ /^SIG[A-Z0-9]*$/ && $2 !~ /SIGARRAYSIZE/ && $3 !~ /void/ {
+ print substr($2, 4, 20)
+}
+$1 == "#" && $2 ~ /^define$/ && $3 ~ /^SIG[A-Z0-9]*$/ && $3 !~ /SIGARRAYSIZE/ && $4 !~ /void/ {
+ print substr($3, 4, 20)
+}' $xxxfiles`
+: Append some common names just in case the awk scan failed.
+xxx="$xxx ABRT ALRM BUS CHLD CLD CONT DIL EMT FPE HUP ILL INT IO IOT KILL"
+xxx="$xxx LOST PHONE PIPE POLL PROF PWR QUIT SEGV STKFLT STOP SYS TERM TRAP"
+xxx="$xxx TSTP TTIN TTOU URG USR1 USR2 USR3 USR4 VTALRM"
+xxx="$xxx WINCH WIND WINDOW XCPU XFSZ"
+: generate a few handy files for later
+$cat > signal.c <<'EOP'
+#include <sys/types.h>
+#include <signal.h>
+int main() {
+#ifdef NSIG
+printf("NSIG %d\n", NSIG);
+#else
+#ifdef _NSIG
+printf("NSIG %d\n", _NSIG);
+#endif
+#endif
+EOP
+echo $xxx | $tr ' ' '\012' | $sort | $uniq | $awk '
+{
+ printf "#ifdef SIG"; printf $1; printf "\n"
+ printf "printf(\""; printf $1; printf " %%d\\n\",SIG";
+ printf $1; printf ");\n"
+ printf "#endif\n"
}
-
END {
- for (i = 1; i <= max; i++) {
- if (sig[i] == "")
- printf "%d", i
- else
- printf "%s", sig[i]
- if (i < max)
- printf " "
+ printf "}\n";
+}
+' >>signal.c
+$cat >signal.awk <<'EOP'
+BEGIN { ndups = 0 }
+$1 ~ /^NSIG$/ { nsig = $2 }
+($1 !~ /^NSIG$/) && (NF == 2) {
+ if ($2 > maxsig) { maxsig = $2 }
+ if (sig_name[$2]) {
+ dup_name[ndups] = $1
+ dup_num[ndups] = $2
+ ndups++
+ }
+ else {
+ sig_name[$2] = $1
+ sig_num[$2] = $2
+ }
+
+}
+END {
+ if (nsig == 0) { nsig = maxsig + 1 }
+ for (n = 1; n < nsig; n++) {
+ if (sig_name[n]) {
+ printf("%s %d\n", sig_name[n], sig_num[n])
+ }
+ else {
+ printf("NUM%d %d\n", n, n)
+ }
}
- printf "\n"
+ for (n = 0; n < ndups; n++) {
+ printf("%s %d\n", dup_name[n], dup_num[n])
+ }
}
-'`
+EOP
+$cat >signal_cmd <<EOS
+$startsh
+$test -s signal.lst && exit 0
+if $cc $ccflags signal.c -o signal $ldflags >/dev/null 2>&1; then
+ ./signal | $sort -n +1 | $uniq | $awk -f signal.awk >signal.lst
+else
+ echo "(I can't seem be able to compile the test program -- Guessing)"
+ echo 'kill -l' >signal
+ set X \`csh -f <signal\`
+ $rm -f signal
shift
- case $# in
- 0)
- echo 'kill -l' >/tmp/foo$$
- set X `csh -f </tmp/foo$$`
- $rm -f /tmp/foo$$
- shift
- case $# in
- 0)set HUP INT QUIT ILL TRAP IOT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM
- ;;
- esac
- ;;
+ case \$# in
+ 0) set HUP INT QUIT ILL TRAP ABRT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM;;
esac
- sig_name="ZERO $*"
+ echo \$@ | $tr ' ' '\012' | \
+ $awk '{ printf $1; printf " %d\n", ++s; }' >signal.lst
+fi
+$rm -f signal.c signal signal.o
+EOS
+chmod a+x signal_cmd
+$eunicefix signal_cmd
+
+: generate list of signal names
+echo " "
+case "$sig_name" in
+'') sig_num='' ;;
+esac
+case "$sig_num" in
+'') sig_name='' ;;
+esac
+case "$sig_name" in
+'')
+ echo "Generating a list of signal names and numbers..." >&4
+ ./signal_cmd
+ sig_name=`$awk '{printf "%s ", $1}' signal.lst`
+ sig_name="ZERO $sig_name"
+ sig_num=`$awk '{printf "%d ", $2}' signal.lst`
+ sig_num="0 $sig_num"
;;
esac
echo "The following signals are available:"
echo $sig_name | $awk \
'BEGIN { linelen = 0 }
{
- for (i = 1; i < NF; i++) {
+ for (i = 1; i <= NF; i++) {
name = "SIG" $i " "
linelen = linelen + length(name)
if (linelen > 70) {
}
printf "%s", name
}
+ printf "\n"
}'
-echo " "
+$rm -f signal signal.c signal.awk signal.lst signal_cmd
: see what type is used for size_t
set size_t sizetype 'unsigned int' stdio.h sys/types.h
eval $typedef
dflt="$timetype"
echo " "
- rp="What type is returned by time() on this sytem?"
+ rp="What type is returned by time() on this system?"
. ./myread
timetype="$ans"
else
. ./myread
uidtype="$ans"
+: see if dbm.h is available
+: see if dbmclose exists
+set dbmclose d_dbmclose
+eval $inlibc
+
+case "$d_dbmclose" in
+$define)
+ set dbm.h i_dbm
+ eval $inhdr
+ case "$i_dbm" in
+ $define)
+ val="$undef"
+ set i_rpcsvcdbm
+ eval $setvar
+ ;;
+ *) set rpcsvc/dbm.h i_rpcsvcdbm
+ eval $inhdr
+ ;;
+ esac
+ ;;
+*) echo "We won't be including <dbm.h>"
+ val="$undef"
+ set i_dbm
+ eval $setvar
+ val="$undef"
+ set i_rpcsvcdbm
+ eval $setvar
+ ;;
+esac
+
: see if this is a sys/file.h system
val=''
set sys/file.h val
eval $inhdr
-: do we need to #include <sys/file.h> ?
+: do we need to include sys/file.h ?
case "$val" in
"$define")
echo " "
set grp.h i_grp
eval $inhdr
+: see if locale.h is available
+set locale.h i_locale
+eval $inhdr
+
: see if this is a math.h system
set math.h i_math
eval $inhdr
set i_memory
eval $setvar
+: see if ndbm.h is available
+set ndbm.h t_ndbm
+eval $inhdr
+case "$t_ndbm" in
+$define)
+ : see if dbm_open exists
+ set dbm_open d_dbm_open
+ eval $inlibc
+ case "$d_dbm_open" in
+ $undef)
+ t_ndbm="$undef"
+ echo "We won't be including <ndbm.h>"
+ ;;
+ esac
+ ;;
+esac
+val="$t_ndbm"
+set i_ndbm
+eval $setvar
+
: see if net/errno.h is available
val=''
set net/errno.h val
chmod +x ccsym
$eunicefix ccsym
./ccsym | $sort | $uniq >ccsym.raw
-$awk '/\=/ { print $0; next } { print $0"=1" }' ccsym.raw >ccsym.list
+$awk '/\=/ { print $0; next }
+ { print $0"=1" }' ccsym.raw >ccsym.list
$awk '{ print $0"=1" }' Cppsym.true >ccsym.true
$comm -13 ccsym.true ccsym.list >ccsym.own
$comm -12 ccsym.true ccsym.list >ccsym.com
}
EOP
$cat > varargs <<EOP
+$startsh
if $cc -c $ccflags -D\$1 varargs.c >/dev/null 2>&1; then
echo "true"
else
set sys/types.h i_systypes
eval $inhdr
+: see if this is a sys/un.h system
+set sys/un.h i_sysun
+eval $inhdr
+
: see if this is a unistd.h system
set unistd.h i_unistd
eval $inhdr
;;
esac
+: see if gdbm.h is available
+set gdbm.h t_gdbm
+eval $inhdr
+case "$t_gdbm" in
+$define)
+ : see if gdbm_open exists
+ set gdbm_open d_gdbm_open
+ eval $inlibc
+ case "$d_gdbm_open" in
+ $undef)
+ t_gdbm="$undef"
+ echo "We won't be including <gdbm.h>"
+ ;;
+ esac
+ ;;
+esac
+val="$t_gdbm"
+set i_gdbm
+eval $setvar
+
+echo " "
+echo "Looking for extensions..." >&4
+cd ../ext
+: If we are using the old config.sh, known_extensions may contain
+: old or inaccurate or duplicate values.
+known_extensions=''
+: We do not use find because it might not be available.
+: We do not just use MANIFEST because the user may have dropped
+: some additional extensions into the source tree and expect them
+: to be built.
+for xxx in * ; do
+ if $test -f $xxx/$xxx.xs; then
+ known_extensions="$known_extensions $xxx"
+ else
+ if $test -d $xxx; then
+ cd $xxx
+ for yyy in * ; do
+ if $test -f $yyy/$yyy.xs; then
+ known_extensions="$known_extensions $xxx/$yyy"
+ fi
+ done
+ cd ..
+ fi
+ fi
+done
+set X $known_extensions
+shift
+known_extensions="$*"
+cd ../UU
+
+: Now see which are supported on this system.
+avail_ext=''
+for xxx in $known_extensions ; do
+ case "$xxx" in
+ DB_File) case "$i_db" in
+ $define) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
+ GDBM_File) case "$i_gdbm" in
+ $define) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
+ NDBM_File) case "$i_ndbm" in
+ $define) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
+ ODBM_File) case "${i_dbm}${i_rpcsvcdbm}" in
+ *"${define}"*) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
+ POSIX) case "$useposix" in
+ true|define|y) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
+ SAFE) case "$usesafe" in
+ true|define|y) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
+ Socket) case "$d_socket" in
+ $define) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
+ *) avail_ext="$avail_ext $xxx"
+ ;;
+ esac
+done
+
+set X $avail_ext
+shift
+avail_ext="$*"
+
+case $usedl in
+$define)
+ $cat <<EOM
+A number of extensions are supplied with $package. You may choose to
+compile these extensions for dynamic loading (the default), compile
+them into the $package executable (static loading), or not include
+them at all. Answer "none" to include no extensions.
+
+EOM
+ case "$dynamic_ext" in
+ '') dflt="$avail_ext" ;;
+ *) dflt="$dynamic_ext" ;;
+ esac
+ case "$dflt" in
+ '') dflt=none;;
+ esac
+ rp="What extensions do you wish to load dynamically?"
+ . ./myread
+ case "$ans" in
+ none) dynamic_ext=' ' ;;
+ *) dynamic_ext="$ans" ;;
+ esac
+
+ case "$static_ext" in
+ '')
+ : Exclude those already listed in dynamic linking
+ dflt=''
+ for xxx in $avail_ext; do
+ case " $dynamic_ext " in
+ *" $xxx "*) ;;
+ *) dflt="$dflt $xxx" ;;
+ esac
+ done
+ set X $dflt
+ shift
+ dflt="$*"
+ ;;
+ *) dflt="$static_ext"
+ ;;
+ esac
+
+ case "$dflt" in
+ '') dflt=none;;
+ esac
+ rp="What extensions do you wish to load statically?"
+ . ./myread
+ case "$ans" in
+ none) static_ext=' ' ;;
+ *) static_ext="$ans" ;;
+ esac
+ ;;
+*)
+ $cat <<EOM
+A number of extensions are supplied with $package. Answer "none"
+to include no extensions.
+
+EOM
+ case "$static_ext" in
+ '') dflt="$avail_ext" ;;
+ *) dflt="$static_ext" ;;
+ esac
+
+ case "$dflt" in
+ '') dflt=none;;
+ esac
+ rp="What extensions do you wish to include?"
+ . ./myread
+ case "$ans" in
+ none) static_ext=' ' ;;
+ *) static_ext="$ans" ;;
+ esac
+ ;;
+esac
+
+set X $dynamic_ext $static_ext
+shift
+extensions="$*"
+
+: Remove build directory name from cppstdin so it can be used from
+: either the present location or the final installed location.
+echo " "
+: Get out of the UU directory to get correct path name.
+cd ..
+case "$cppstdin" in
+`pwd`/cppstdin)
+ echo "Stripping down cppstdin path name"
+ cppstdin=cppstdin
+ ;;
+esac
+cd UU
+
: end of configuration questions
echo " "
echo "End of configuration questions."
afs='$afs'
alignbytes='$alignbytes'
aphostname='$aphostname'
+ar='$ar'
archlib='$archlib'
archlibexp='$archlibexp'
archname='$archname'
+archobjs='$archobjs'
awk='$awk'
baserev='$baserev'
bash='$bash'
ccdlflags='$ccdlflags'
ccflags='$ccflags'
cf_by='$cf_by'
+cf_email='$cf_email'
cf_time='$cf_time'
chgrp='$chgrp'
chmod='$chmod'
d_bcopy='$d_bcopy'
d_bsd='$d_bsd'
d_bsdpgrp='$d_bsdpgrp'
-d_byacc='$d_byacc'
d_bzero='$d_bzero'
d_casti32='$d_casti32'
d_castneg='$d_castneg'
d_dlopen='$d_dlopen'
d_dlsymun='$d_dlsymun'
d_dosuid='$d_dosuid'
-d_drem='$d_drem'
d_dup2='$d_dup2'
+d_eofnblk='$d_eofnblk'
d_eunice='$d_eunice'
d_fchmod='$d_fchmod'
d_fchown='$d_fchown'
d_fgetpos='$d_fgetpos'
d_flexfnam='$d_flexfnam'
d_flock='$d_flock'
-d_fmod='$d_fmod'
d_fork='$d_fork'
d_fpathconf='$d_fpathconf'
d_fsetpos='$d_fsetpos'
d_isascii='$d_isascii'
d_killpg='$d_killpg'
d_link='$d_link'
-d_linuxstd='$d_linuxstd'
d_locconv='$d_locconv'
d_lockf='$d_lockf'
d_lstat='$d_lstat'
d_msgsnd='$d_msgsnd'
d_mymalloc='$d_mymalloc'
d_nice='$d_nice'
+d_oldarchlib='$d_oldarchlib'
d_oldsock='$d_oldsock'
d_open3='$d_open3'
d_pathconf='$d_pathconf'
d_pause='$d_pause'
d_phostname='$d_phostname'
d_pipe='$d_pipe'
+d_poll='$d_poll'
d_portable='$d_portable'
d_pwage='$d_pwage'
d_pwchange='$d_pwchange'
d_shmdt='$d_shmdt'
d_shmget='$d_shmget'
d_shrplib='$d_shrplib'
+d_sigaction='$d_sigaction'
+d_sigintrp='$d_sigintrp'
+d_sigsetjmp='$d_sigsetjmp'
+d_sigvec='$d_sigvec'
+d_sigvectr='$d_sigvectr'
d_socket='$d_socket'
d_sockpair='$d_sockpair'
d_statblks='$d_statblks'
+d_stdio_cnt_lval='$d_stdio_cnt_lval'
+d_stdio_ptr_lval='$d_stdio_ptr_lval'
+d_stdiobase='$d_stdiobase'
d_stdstdio='$d_stdstdio'
d_strchr='$d_strchr'
d_strcoll='$d_strcoll'
dlext='$dlext'
dlsrc='$dlsrc'
dynamic_ext='$dynamic_ext'
+eagain='$eagain'
echo='$echo'
egrep='$egrep'
emacs='$emacs'
eunicefix='$eunicefix'
+exe_ext='$exe_ext'
expr='$expr'
extensions='$extensions'
find='$find'
+firstmakefile='$firstmakefile'
flex='$flex'
fpostype='$fpostype'
freetype='$freetype'
i_gdbm='$i_gdbm'
i_grp='$i_grp'
i_limits='$i_limits'
+i_locale='$i_locale'
i_malloc='$i_malloc'
i_math='$i_math'
i_memory='$i_memory'
i_neterrno='$i_neterrno'
i_niin='$i_niin'
i_pwd='$i_pwd'
+i_rpcsvcdbm='$i_rpcsvcdbm'
i_sgtty='$i_sgtty'
i_stdarg='$i_stdarg'
i_stddef='$i_stddef'
i_systimek='$i_systimek'
i_systimes='$i_systimes'
i_systypes='$i_systypes'
+i_sysun='$i_sysun'
i_termio='$i_termio'
i_termios='$i_termios'
i_time='$i_time'
inews='$inews'
installarchlib='$installarchlib'
installbin='$installbin'
-installmansrc='$installmansrc'
+installman1dir='$installman1dir'
+installman3dir='$installman3dir'
installprivlib='$installprivlib'
installscript='$installscript'
+installsitearch='$installsitearch'
+installsitelib='$installsitelib'
intsize='$intsize'
known_extensions='$known_extensions'
ksh='$ksh'
large='$large'
+ld='$ld'
lddlflags='$lddlflags'
ldflags='$ldflags'
less='$less'
+lib_ext='$lib_ext'
libc='$libc'
libpth='$libpth'
libs='$libs'
lkflags='$lkflags'
ln='$ln'
lns='$lns'
+locincpth='$locincpth'
+loclibpth='$loclibpth'
lp='$lp'
lpr='$lpr'
ls='$ls'
mallocobj='$mallocobj'
mallocsrc='$mallocsrc'
malloctype='$malloctype'
-manext='$manext'
-mansrc='$mansrc'
-mansrcexp='$mansrcexp'
+man1dir='$man1dir'
+man1direxp='$man1direxp'
+man1ext='$man1ext'
+man3dir='$man3dir'
+man3direxp='$man3direxp'
+man3ext='$man3ext'
medium='$medium'
mips='$mips'
mips_type='$mips_type'
myuname='$myuname'
n='$n'
nm_opt='$nm_opt'
+nm_so_opt='$nm_so_opt'
nroff='$nroff'
+o_nonblock='$o_nonblock'
+obj_ext='$obj_ext'
+oldarchlib='$oldarchlib'
+oldarchlibexp='$oldarchlibexp'
optimize='$optimize'
orderlib='$orderlib'
osname='$osname'
osvers='$osvers'
package='$package'
+pager='$pager'
passcat='$passcat'
patchlevel='$patchlevel'
+path_sep='$path_sep'
perl='$perl'
+perladmin='$perladmin'
+perlpath='$perlpath'
pg='$pg'
phostname='$phostname'
plibpth='$plibpth'
prototype='$prototype'
randbits='$randbits'
ranlib='$ranlib'
+rd_nodata='$rd_nodata'
rm='$rm'
rmail='$rmail'
runnm='$runnm'
shrpdir='$shrpdir'
shsharp='$shsharp'
sig_name='$sig_name'
+sig_num='$sig_num'
signal_t='$signal_t'
+sitearch='$sitearch'
+sitearchexp='$sitearchexp'
+sitelib='$sitelib'
+sitelibexp='$sitelibexp'
sizetype='$sizetype'
sleep='$sleep'
smail='$smail'
spitshell='$spitshell'
split='$split'
ssizetype='$ssizetype'
+startperl='$startperl'
startsh='$startsh'
static_ext='$static_ext'
stdchar='$stdchar'
+stdio_base='$stdio_base'
+stdio_bufsiz='$stdio_bufsiz'
+stdio_cnt='$stdio_cnt'
+stdio_ptr='$stdio_ptr'
strings='$strings'
submit='$submit'
+subversion='$subversion'
sysman='$sysman'
tail='$tail'
tar='$tar'
usemymalloc='$usemymalloc'
usenm='$usenm'
useposix='$useposix'
+usesafe='$usesafe'
usevfork='$usevfork'
usrinc='$usrinc'
uuname='$uuname'
https://perl5.git.perl.org / perl5.git / blobdiff