+/*#define HAS_FD_SET / **/
+
+/* Gconvert:
+ * This preprocessor macro is defined to convert a floating point
+ * number to a string without a trailing decimal point. This
+ * emulates the behavior of sprintf("%g"), but is sometimes much more
+ * efficient. If gconvert() is not available, but gcvt() drops the
+ * trailing decimal point, then gcvt() is used. If all else fails,
+ * a macro using sprintf("%g") is used. Arguments for the Gconvert
+ * macro are: value, number of digits, whether trailing zeros should
+ * be retained, and the output buffer.
+ * The usual values are:
+ * d_Gconvert='gconvert((x),(n),(t),(b))'
+ * d_Gconvert='gcvt((x),(n),(b))'
+ * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
+ * The last two assume trailing zeros should not be kept.
+ */
+#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
+
+/* HAS_GETPAGESIZE:
+ * This symbol, if defined, indicates that the getpagesize system call
+ * is available to get system page size, which is the granularity of
+ * many memory management calls.
+ */
+/*#define HAS_GETPAGESIZE / **/
+
+/* HAS_GNULIBC:
+ * This symbol, if defined, indicates to the C program that
+ * the GNU C library is being used. A better check is to use
+ * the __GLIBC__ and __GLIBC_MINOR__ symbols supplied with glibc.
+ */
+/*#define HAS_GNULIBC / **/
+#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
+# define _GNU_SOURCE
+#endif
+/* HAS_ISASCII:
+ * This manifest constant lets the C program know that isascii
+ * is available.
+ */
+/*#define HAS_ISASCII / **/
+
+/* HAS_LCHOWN:
+ * This symbol, if defined, indicates that the lchown routine is
+ * available to operate on a symbolic link (instead of following the
+ * link).
+ */
+/*#define HAS_LCHOWN / **/
+
+/* HAS_OPEN3:
+ * This manifest constant lets the C program know that the three
+ * argument form of open(2) is available.
+ */
+/*#define HAS_OPEN3 / **/
+
+/* HAS_SAFE_BCOPY:
+ * This symbol, if defined, indicates that the bcopy routine is available
+ * to copy potentially overlapping memory blocks. Normally, you should
+ * probably use memmove() or memcpy(). If neither is defined, roll your
+ * own version.
+ */
+/*#define HAS_SAFE_BCOPY / **/
+
+/* HAS_SAFE_MEMCPY:
+ * This symbol, if defined, indicates that the memcpy routine is available
+ * to copy potentially overlapping memory blocks. If you need to
+ * copy overlapping memory blocks, you should check HAS_MEMMOVE and
+ * use memmove() instead, if available.
+ */
+/*#define HAS_SAFE_MEMCPY / **/
+
+/* HAS_SANE_MEMCMP:
+ * This symbol, if defined, indicates that the memcmp routine is available
+ * and can be used to compare relative magnitudes of chars with their high
+ * bits set. If it is not defined, roll your own version.
+ */
+/*#define HAS_SANE_MEMCMP / **/
+
+/* HAS_SIGACTION:
+ * This symbol, if defined, indicates that Vr4's sigaction() routine
+ * is available.
+ */
+/*#define HAS_SIGACTION / **/
+
+/* HAS_SIGSETJMP:
+ * This variable indicates to the C program that the sigsetjmp()
+ * routine is available to save the calling process's registers
+ * and stack environment for later use by siglongjmp(), and
+ * to optionally save the process's signal mask. See
+ * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
+ */
+/* Sigjmp_buf:
+ * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
+ */
+/* Sigsetjmp:
+ * This macro is used in the same way as sigsetjmp(), but will invoke
+ * traditional setjmp() if sigsetjmp isn't available.
+ * See HAS_SIGSETJMP.
+ */
+/* Siglongjmp:
+ * This macro is used in the same way as siglongjmp(), but will invoke
+ * traditional longjmp() if siglongjmp isn't available.
+ * See HAS_SIGSETJMP.
+ */
+/*#define HAS_SIGSETJMP / **/
+#ifdef HAS_SIGSETJMP
+#define Sigjmp_buf sigjmp_buf
+#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
+#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
+#else
+#define Sigjmp_buf jmp_buf
+#define Sigsetjmp(buf,save_mask) setjmp((buf))
+#define Siglongjmp(buf,retval) longjmp((buf),(retval))
+#endif
+
+/* USE_STDIO_PTR:
+ * This symbol is defined if the _ptr and _cnt fields (or similar)
+ * of the stdio FILE structure can be used to access the stdio buffer
+ * for a file handle. If this is defined, then the FILE_ptr(fp)
+ * and FILE_cnt(fp) macros will also be defined and should be used
+ * to access these fields.
+ */
+/* FILE_ptr:
+ * This macro is used to access the _ptr field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_PTR is defined.
+ */
+/* STDIO_PTR_LVALUE:
+ * This symbol is defined if the FILE_ptr macro can be used as an
+ * lvalue.
+ */
+/* FILE_cnt:
+ * This macro is used to access the _cnt field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_PTR is defined.
+ */
+/* STDIO_CNT_LVALUE:
+ * This symbol is defined if the FILE_cnt macro can be used as an
+ * lvalue.
+ */
+/* STDIO_PTR_LVAL_SETS_CNT:
+ * This symbol is defined if using the FILE_ptr macro as an lvalue
+ * to increase the pointer by n has the side effect of decreasing the
+ * value of File_cnt(fp) by n.
+ */
+/* STDIO_PTR_LVAL_NOCHANGE_CNT:
+ * This symbol is defined if using the FILE_ptr macro as an lvalue
+ * to increase the pointer by n leaves File_cnt(fp) unchanged.
+ */
+/*#define USE_STDIO_PTR / **/
+#ifdef USE_STDIO_PTR
+#define FILE_ptr(fp) ((fp)->_IO_read_ptr)
+/*#define STDIO_PTR_LVALUE / **/
+#define FILE_cnt(fp) ((fp)->_IO_read_end - (fp)->_IO_read_ptr)
+/*#define STDIO_CNT_LVALUE / **/
+/*#define STDIO_PTR_LVAL_SETS_CNT / **/
+/*#define STDIO_PTR_LVAL_NOCHANGE_CNT / **/
+#endif
+
+/* USE_STDIO_BASE:
+ * This symbol is defined if the _base field (or similar) of the
+ * stdio FILE structure can be used to access the stdio buffer for
+ * a file handle. If this is defined, then the FILE_base(fp) macro
+ * will also be defined and should be used to access this field.
+ * Also, the FILE_bufsiz(fp) macro will be defined and should be used
+ * to determine the number of bytes in the buffer. USE_STDIO_BASE
+ * will never be defined unless USE_STDIO_PTR is.
+ */
+/* FILE_base:
+ * This macro is used to access the _base field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_BASE is defined.
+ */
+/* FILE_bufsiz:
+ * This macro is used to determine the number of bytes in the I/O
+ * buffer pointed to by _base field (or equivalent) of the FILE
+ * structure pointed to its argument. This macro will always be defined
+ * if USE_STDIO_BASE is defined.
+ */
+/*#define USE_STDIO_BASE / **/
+#ifdef USE_STDIO_BASE
+#define FILE_base(fp) ((fp)->_IO_read_base)
+#define FILE_bufsiz(fp) ((fp)->_IO_read_end - (fp)->_IO_read_base)
+#endif
+
+/* HAS_VPRINTF:
+ * This symbol, if defined, indicates that the vprintf routine is available
+ * to printf with a pointer to an argument list. If unavailable, you
+ * may need to write your own, probably in terms of _doprnt().
+ */
+/* USE_CHAR_VSPRINTF:
+ * This symbol is defined if this system has vsprintf() returning type
+ * (char*). The trend seems to be to declare it as "int vsprintf()". It
+ * is up to the package author to declare vsprintf correctly based on the
+ * symbol.
+ */
+#define HAS_VPRINTF /**/
+/*#define USE_CHAR_VSPRINTF / **/
+
+/* DOUBLESIZE:
+ * This symbol contains the size of a double, so that the C preprocessor
+ * can make decisions based on it.
+ */
+#define DOUBLESIZE 8 /**/
+
+/* I_TIME:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <time.h>.
+ */
+/* I_SYS_TIME:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/time.h>.
+ */
+/* I_SYS_TIME_KERNEL:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/time.h> with KERNEL defined.
+ */
+/* HAS_TM_TM_ZONE:
+ * This symbol, if defined, indicates to the C program that
+ * the struct tm has a tm_zone field.
+ */
+/* HAS_TM_TM_GMTOFF:
+ * This symbol, if defined, indicates to the C program that
+ * the struct tm has a tm_gmtoff field.
+ */
+#define I_TIME /**/
+/*#define I_SYS_TIME / **/
+/*#define I_SYS_TIME_KERNEL / **/
+/*#define HAS_TM_TM_ZONE / **/
+/*#define HAS_TM_TM_GMTOFF / **/
+
+/* VAL_O_NONBLOCK:
+ * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
+ * non-blocking I/O for the file descriptor. Note that there is no way
+ * back, i.e. you cannot turn it blocking again this way. If you wish to
+ * alternatively switch between blocking and non-blocking, use the
+ * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
+ */
+/* VAL_EAGAIN:
+ * This symbol holds the errno error code set by read() when no data was
+ * present on the non-blocking file descriptor.
+ */
+/* RD_NODATA:
+ * This symbol holds the return code from read() when no data is present
+ * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
+ * not defined, then you can't distinguish between no data and EOF by
+ * issuing a read(). You'll have to find another way to tell for sure!
+ */
+/* EOF_NONBLOCK:
+ * This symbol, if defined, indicates to the C program that a read() on
+ * a non-blocking file descriptor will return 0 on EOF, and not the value
+ * held in RD_NODATA (-1 usually, in that case!).
+ */
+#define VAL_O_NONBLOCK O_NONBLOCK
+#define VAL_EAGAIN EAGAIN
+#define RD_NODATA -1
+#undef EOF_NONBLOCK
+
+/* PTRSIZE:
+ * This symbol contains the size of a pointer, so that the C preprocessor
+ * can make decisions based on it. It will be sizeof(void *) if
+ * the compiler supports (void *); otherwise it will be
+ * sizeof(char *).
+ */
+#define PTRSIZE 4 /**/
+
+/* Drand01:
+ * This macro is to be used to generate uniformly distributed
+ * random numbers over the range [0., 1.[. You may have to supply
+ * an 'extern double drand48();' in your program since SunOS 4.1.3
+ * doesn't provide you with anything relevant in its headers.
+ * See HAS_DRAND48_PROTO.
+ */
+/* Rand_seed_t:
+ * This symbol defines the type of the argument of the
+ * random seed function.
+ */
+/* seedDrand01:
+ * This symbol defines the macro to be used in seeding the
+ * random number generator (see Drand01).
+ */
+/* RANDBITS:
+ * This symbol indicates how many bits are produced by the
+ * function used to generate normalized random numbers.
+ * Values include 15, 16, 31, and 48.
+ */
+#define Drand01() ((rand() & 0x7FFF) / (double) ((unsigned long)1 << 15)) /**/
+#define Rand_seed_t int /**/
+#define seedDrand01(x) srand((Rand_seed_t)x) /**/
+#define RANDBITS 48 /**/
+
+/* SSize_t:
+ * This symbol holds the type used by functions that return
+ * a count of bytes or an error condition. It must be a signed type.
+ * It is usually ssize_t, but may be long or int, etc.
+ * It may be necessary to include <sys/types.h> or <unistd.h>
+ * to get any typedef'ed information.
+ * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
+ */
+#define SSize_t int /* signed count of bytes */
+
+/* EBCDIC:
+ * This symbol, if defined, indicates that this system uses
+ * EBCDIC encoding.
+ */
+/*#define EBCDIC / **/
+
+/* ARCHLIB:
+ * This variable, if defined, holds the name of the directory in
+ * which the user wants to put architecture-dependent public
+ * library files for . It is most often a local directory
+ * such as /usr/local/lib. Programs using this variable must be
+ * prepared to deal with filename expansion. If ARCHLIB is the
+ * same as PRIVLIB, it is not defined, since presumably the
+ * program already searches PRIVLIB.
+ */
+/* ARCHLIB_EXP:
+ * This symbol contains the ~name expanded version of ARCHLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+/*#define ARCHLIB "/usr/local/lib/perl5/5.7/unknown" / **/
+/*#define ARCHLIB_EXP "/usr/local/lib/perl5/5.7/unknown" / **/
+
+/* BIN:
+ * This symbol holds the path of the bin directory where the package will
+ * be installed. Program must be prepared to deal with ~name substitution.
+ */
+/* BIN_EXP:
+ * This symbol is the filename expanded version of the BIN symbol, for
+ * programs that do not want to deal with that at run-time.
+ */
+#define BIN "/usr/local/bin" /**/
+#define BIN_EXP "" /**/
+
+/* PERL_INC_VERSION_LIST:
+ * This variable specifies the list of subdirectories in over
+ * which perl.c:incpush() and lib/lib.pm will automatically
+ * search when adding directories to @INC, in a format suitable
+ * for a C initialization string. See the inc_version_list entry
+ * in Porting/Glossary for more details.
+ */
+#define PERL_INC_VERSION_LIST NULL /**/
+
+/* INSTALL_USR_BIN_PERL:
+ * This symbol, if defined, indicates that Perl is to be installed
+ * also as /usr/bin/perl.
+ */
+/*#define INSTALL_USR_BIN_PERL / **/
+
+/* PERL_OTHERLIBDIRS:
+ * This variable contains a colon-separated set of paths for the perl
+ * binary to search for additional library files or modules.
+ * These directories will be tacked to the end of @INC.
+ * Perl will automatically search below each path for version-
+ * and architecture-specific directories. See PERL_INC_VERSION_LIST
+ * for more details.
+ */
+/*#define PERL_OTHERLIBDIRS "" / **/
+
+/* PRIVLIB:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ */
+/* PRIVLIB_EXP:
+ * This symbol contains the ~name expanded version of PRIVLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define PRIVLIB "/usr/local/lib/perl5/5.7" /**/
+#define PRIVLIB_EXP "/usr/local/lib/perl5/5.7" /**/
+
+/* SITEARCH:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ * The standard distribution will put nothing in this directory.
+ * After perl has been installed, users may install their own local
+ * architecture-dependent modules in this directory with
+ * MakeMaker Makefile.PL
+ * or equivalent. See INSTALL for details.
+ */
+/* SITEARCH_EXP:
+ * This symbol contains the ~name expanded version of SITEARCH, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define SITEARCH "" /**/
+#define SITEARCH_EXP "" /**/
+
+/* SITELIB:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ * The standard distribution will put nothing in this directory.
+ * After perl has been installed, users may install their own local
+ * architecture-independent modules in this directory with
+ * MakeMaker Makefile.PL
+ * or equivalent. See INSTALL for details.
+ */
+/* SITELIB_EXP:
+ * This symbol contains the ~name expanded version of SITELIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+/* SITELIB_STEM:
+ * This define is SITELIB_EXP with any trailing version-specific component
+ * removed. The elements in inc_version_list (inc_version_list.U) can
+ * be tacked onto this variable to generate a list of directories to search.
+ */
+#define SITELIB "" /**/
+#define SITELIB_EXP "" /**/
+#define SITELIB_STEM "" /**/
+
+/* PERL_VENDORARCH:
+ * If defined, this symbol contains the name of a private library.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world.
+ * It may have a ~ on the front.
+ * The standard distribution will put nothing in this directory.
+ * Vendors who distribute perl may wish to place their own
+ * architecture-dependent modules and extensions in this directory with
+ * MakeMaker Makefile.PL INSTALLDIRS=vendor
+ * or equivalent. See INSTALL for details.
+ */
+/* PERL_VENDORARCH_EXP:
+ * This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+/*#define PERL_VENDORARCH "" / **/
+/*#define PERL_VENDORARCH_EXP "" / **/
+
+/* PERL_VENDORLIB_EXP:
+ * This symbol contains the ~name expanded version of VENDORLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+/* PERL_VENDORLIB_STEM:
+ * This define is PERL_VENDORLIB_EXP with any trailing version-specific component
+ * removed. The elements in inc_version_list (inc_version_list.U) can
+ * be tacked onto this variable to generate a list of directories to search.
+ */
+/*#define PERL_VENDORLIB_EXP "" / **/
+/*#define PERL_VENDORLIB_STEM "" / **/
+
+/* OSNAME:
+ * This symbol contains the name of the operating system, as determined
+ * by Configure. You shouldn't rely on it too much; the specific
+ * feature tests from Configure are generally more reliable.
+ */
+/* OSVERS:
+ * This symbol contains the version of the operating system, as determined
+ * by Configure. You shouldn't rely on it too much; the specific
+ * feature tests from Configure are generally more reliable.
+ */
+#define OSNAME "unknown" /**/
+#define OSVERS "" /**/
+
+/* CAT2:
+ * This macro concatenates 2 tokens together.
+ */
+/* STRINGIFY:
+ * This macro surrounds its token with double quotes.
+ */
+#if 42 == 1
+#define CAT2(a,b) a/**/b
+#define STRINGIFY(a) "a"
+ /* If you can get stringification with catify, tell me how! */
+#endif
+#if 42 == 42
+#define PeRl_CaTiFy(a, b) a ## b
+#define PeRl_StGiFy(a) #a
+/* the additional level of indirection enables these macros to be
+ * used as arguments to other macros. See K&R 2nd ed., page 231. */
+#define CAT2(a,b) PeRl_CaTiFy(a,b)
+#define StGiFy(a) PeRl_StGiFy(a)
+#define STRINGIFY(a) PeRl_StGiFy(a)
+#endif
+#if 42 != 1 && 42 != 42
+# include "Bletch: How does this C preprocessor concatenate tokens?"
+#endif
+
+/* CPPSTDIN:
+ * This symbol contains the first part of the string which will invoke
+ * the C preprocessor on the standard input and produce to standard
+ * output. Typical value of "cc -E" or "/lib/cpp", but it can also
+ * call a wrapper. See CPPRUN.
+ */
+/* CPPMINUS:
+ * This symbol contains the second part of the string which will invoke
+ * the C preprocessor on the standard input and produce to standard
+ * output. This symbol will have the value "-" if CPPSTDIN needs a minus
+ * to specify standard input, otherwise the value is "".
+ */
+/* CPPRUN:
+ * This symbol contains the string which will invoke a C preprocessor on
+ * the standard input and produce to standard output. It needs to end
+ * with CPPLAST, after all other preprocessor flags have been specified.
+ * The main difference with CPPSTDIN is that this program will never be a
+ * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
+ * available directly to the user. Note that it may well be different from
+ * the preprocessor used to compile the C program.
+ */
+/* CPPLAST:
+ * This symbol is intended to be used along with CPPRUN in the same manner
+ * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "".
+ */
+#define CPPSTDIN ""
+#define CPPMINUS ""
+#define CPPRUN ""
+#define CPPLAST ""
+
+/* HAS_ACCESS:
+ * This manifest constant lets the C program know that the access()
+ * system call is available to check for accessibility using real UID/GID.
+ * (always present on UNIX.)
+ */
+/*#define HAS_ACCESS / **/
+
+/* HASATTRIBUTE:
+ * This symbol indicates the C compiler can check for function attributes,
+ * such as printf formats. This is normally only supported by GNU cc.
+ */
+/*#define HASATTRIBUTE / **/
+#ifndef HASATTRIBUTE
+#ifdef __attribute__
+#undef __attribute__
+#endif
+#define __attribute__(_arg_)
+#endif
+
+/* HAS_CRYPT:
+ * This symbol, if defined, indicates that the crypt routine is available
+ * to encrypt passwords and the like.
+ */
+/*#define HAS_CRYPT / **/
+
+/* HAS_CSH:
+ * This symbol, if defined, indicates that the C-shell exists.
+ */
+/* CSH:
+ * This symbol, if defined, contains the full pathname of csh.
+ */
+/*#define HAS_CSH / **/
+#ifdef HAS_CSH
+#define CSH "" /**/
+#endif
+
+/* SETUID_SCRIPTS_ARE_SECURE_NOW:
+ * This symbol, if defined, indicates that the bug that prevents
+ * setuid scripts from being secure is not present in this kernel.
+ */
+/* DOSUID:
+ * This symbol, if defined, indicates that the C program should
+ * check the script that it is executing for setuid/setgid bits, and
+ * attempt to emulate setuid/setgid on systems that have disabled
+ * setuid #! scripts because the kernel can't do it securely.
+ * It is up to the package designer to make sure that this emulation
+ * is done securely. Among other things, it should do an fstat on
+ * the script it just opened to make sure it really is a setuid/setgid
+ * script, it should make sure the arguments passed correspond exactly
+ * to the argument on the #! line, and it should not trust any
+ * subprocesses to which it must pass the filename rather than the
+ * file descriptor of the script to be executed.
+ */
+/*#define SETUID_SCRIPTS_ARE_SECURE_NOW / **/
+/*#define DOSUID / **/
+
+/* HAS_ENDGRENT:
+ * This symbol, if defined, indicates that the getgrent routine is
+ * available for finalizing sequential access of the group database.
+ */
+/*#define HAS_ENDGRENT / **/
+
+/* HAS_ENDHOSTENT:
+ * This symbol, if defined, indicates that the endhostent() routine is
+ * available to close whatever was being used for host queries.
+ */
+/*#define HAS_ENDHOSTENT / **/
+
+/* HAS_ENDNETENT:
+ * This symbol, if defined, indicates that the endnetent() routine is
+ * available to close whatever was being used for network queries.
+ */
+/*#define HAS_ENDNETENT / **/
+
+/* HAS_ENDPROTOENT:
+ * This symbol, if defined, indicates that the endprotoent() routine is
+ * available to close whatever was being used for protocol queries.
+ */
+/*#define HAS_ENDPROTOENT / **/
+
+/* HAS_ENDPWENT:
+ * This symbol, if defined, indicates that the getgrent routine is
+ * available for finalizing sequential access of the passwd database.
+ */
+/*#define HAS_ENDPWENT / **/
+
+/* HAS_ENDSERVENT:
+ * This symbol, if defined, indicates that the endservent() routine is
+ * available to close whatever was being used for service queries.
+ */
+/*#define HAS_ENDSERVENT / **/
+
+/* FLEXFILENAMES:
+ * This symbol, if defined, indicates that the system supports filenames
+ * longer than 14 characters.
+ */
+/*#define FLEXFILENAMES / **/
+
+/* HAS_GETGRENT:
+ * This symbol, if defined, indicates that the getgrent routine is
+ * available for sequential access of the group database.
+ */
+/*#define HAS_GETGRENT / **/
+
+/* HAS_GETHOSTBYADDR:
+ * This symbol, if defined, indicates that the gethostbyaddr() routine is
+ * available to look up hosts by their IP addresses.
+ */
+/*#define HAS_GETHOSTBYADDR / **/
+
+/* HAS_GETHOSTBYNAME:
+ * This symbol, if defined, indicates that the gethostbyname() routine is
+ * available to look up host names in some data base or other.
+ */
+/*#define HAS_GETHOSTBYNAME / **/
+
+/* HAS_GETHOSTENT:
+ * This symbol, if defined, indicates that the gethostent() routine is
+ * available to look up host names in some data base or another.
+ */
+/*#define HAS_GETHOSTENT / **/
+
+/* HAS_GETHOSTNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * gethostname() routine to derive the host name. See also HAS_UNAME
+ * and PHOSTNAME.
+ */
+/* HAS_UNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * uname() routine to derive the host name. See also HAS_GETHOSTNAME
+ * and PHOSTNAME.
+ */
+/* PHOSTNAME:
+ * This symbol, if defined, indicates the command to feed to the
+ * popen() routine to derive the host name. See also HAS_GETHOSTNAME
+ * and HAS_UNAME. Note that the command uses a fully qualified path,
+ * so that it is safe even if used by a process with super-user
+ * privileges.
+ */
+/* HAS_PHOSTNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * contents of PHOSTNAME as a command to feed to the popen() routine
+ * to derive the host name.
+ */
+/*#define HAS_GETHOSTNAME / **/
+/*#define HAS_UNAME / **/
+/*#define HAS_PHOSTNAME / **/
+#ifdef HAS_PHOSTNAME
+#define PHOSTNAME "" /* How to get the host name */
+#endif
+
+/* HAS_GETNETBYADDR:
+ * This symbol, if defined, indicates that the getnetbyaddr() routine is
+ * available to look up networks by their IP addresses.
+ */
+/*#define HAS_GETNETBYADDR / **/
+
+/* HAS_GETNETBYNAME:
+ * This symbol, if defined, indicates that the getnetbyname() routine is
+ * available to look up networks by their names.
+ */
+/*#define HAS_GETNETBYNAME / **/
+
+/* HAS_GETNETENT:
+ * This symbol, if defined, indicates that the getnetent() routine is
+ * available to look up network names in some data base or another.
+ */
+/*#define HAS_GETNETENT / **/
+
+/* HAS_GETPROTOENT:
+ * This symbol, if defined, indicates that the getprotoent() routine is
+ * available to look up protocols in some data base or another.
+ */
+/*#define HAS_GETPROTOENT / **/
+
+/* HAS_GETPGRP:
+ * This symbol, if defined, indicates that the getpgrp routine is
+ * available to get the current process group.
+ */
+/* USE_BSD_GETPGRP:
+ * This symbol, if defined, indicates that getpgrp needs one
+ * arguments whereas USG one needs none.
+ */
+/*#define HAS_GETPGRP / **/
+/*#define USE_BSD_GETPGRP / **/
+
+/* HAS_GETPROTOBYNAME:
+ * This symbol, if defined, indicates that the getprotobyname()
+ * routine is available to look up protocols by their name.
+ */
+/* HAS_GETPROTOBYNUMBER:
+ * This symbol, if defined, indicates that the getprotobynumber()
+ * routine is available to look up protocols by their number.
+ */
+/*#define HAS_GETPROTOBYNAME / **/
+/*#define HAS_GETPROTOBYNUMBER / **/
+
+/* HAS_GETPWENT:
+ * This symbol, if defined, indicates that the getpwent routine is
+ * available for sequential access of the passwd database.
+ * If this is not available, the older getpw() function may be available.
+ */
+/*#define HAS_GETPWENT / **/
+
+/* HAS_GETSERVENT:
+ * This symbol, if defined, indicates that the getservent() routine is
+ * available to look up network services in some data base or another.
+ */
+/*#define HAS_GETSERVENT / **/
+
+/* HAS_GETSERVBYNAME:
+ * This symbol, if defined, indicates that the getservbyname()
+ * routine is available to look up services by their name.
+ */
+/* HAS_GETSERVBYPORT:
+ * This symbol, if defined, indicates that the getservbyport()
+ * routine is available to look up services by their port.
+ */
+/*#define HAS_GETSERVBYNAME / **/
+/*#define HAS_GETSERVBYPORT / **/
+
+/* HAS_HTONL:
+ * This symbol, if defined, indicates that the htonl() routine (and
+ * friends htons() ntohl() ntohs()) are available to do network
+ * order byte swapping.
+ */
+/* HAS_HTONS:
+ * This symbol, if defined, indicates that the htons() routine (and
+ * friends htonl() ntohl() ntohs()) are available to do network
+ * order byte swapping.
+ */
+/* HAS_NTOHL:
+ * This symbol, if defined, indicates that the ntohl() routine (and
+ * friends htonl() htons() ntohs()) are available to do network
+ * order byte swapping.
+ */
+/* HAS_NTOHS:
+ * This symbol, if defined, indicates that the ntohs() routine (and
+ * friends htonl() htons() ntohl()) are available to do network
+ * order byte swapping.
+ */
+/*#define HAS_HTONL / **/
+/*#define HAS_HTONS / **/
+/*#define HAS_NTOHL / **/
+/*#define HAS_NTOHS / **/
+
+/* HAS_LONG_DOUBLE:
+ * This symbol will be defined if the C compiler supports long
+ * doubles.
+ */
+/* LONG_DOUBLESIZE:
+ * This symbol contains the size of a long double, so that the
+ * C preprocessor can make decisions based on it. It is only
+ * defined if the system supports long doubles.
+ */
+/*#define HAS_LONG_DOUBLE / **/
+#ifdef HAS_LONG_DOUBLE
+#define LONG_DOUBLESIZE 8 /**/
+#endif
+
+/* HAS_LONG_LONG:
+ * This symbol will be defined if the C compiler supports long long.
+ */
+/* LONGLONGSIZE:
+ * This symbol contains the size of a long long, so that the
+ * C preprocessor can make decisions based on it. It is only
+ * defined if the system supports long long.
+ */
+/*#define HAS_LONG_LONG / **/
+#ifdef HAS_LONG_LONG
+#define LONGLONGSIZE 8 /**/
+#endif
+
+/* HAS_MEMCHR:
+ * This symbol, if defined, indicates that the memchr routine is available
+ * to locate characters within a C string.
+ */
+/*#define HAS_MEMCHR / **/
+
+/* HAS_MKSTEMP:
+ * This symbol, if defined, indicates that the mkstemp routine is
+ * available to exclusively create and open a uniquely named
+ * temporary file.
+ */
+/*#define HAS_MKSTEMP / **/
+
+/* HAS_MMAP:
+ * This symbol, if defined, indicates that the mmap system call is
+ * available to map a file into memory.
+ */
+/* Mmap_t:
+ * This symbol holds the return type of the mmap() system call
+ * (and simultaneously the type of the first argument).
+ * Usually set to 'void *' or 'cadd_t'.
+ */
+/*#define HAS_MMAP / **/
+#define Mmap_t /**/
+
+/* HAS_MSG:
+ * This symbol, if defined, indicates that the entire msg*(2) library is
+ * supported (IPC mechanism based on message queues).
+ */
+/*#define HAS_MSG / **/
+
+/* HAS_SEM:
+ * This symbol, if defined, indicates that the entire sem*(2) library is
+ * supported.
+ */
+/*#define HAS_SEM / **/
+
+/* HAS_SETGRENT:
+ * This symbol, if defined, indicates that the setgrent routine is
+ * available for initializing sequential access of the group database.
+ */
+/*#define HAS_SETGRENT / **/
+
+/* HAS_SETGROUPS:
+ * This symbol, if defined, indicates that the setgroups() routine is
+ * available to set the list of process groups. If unavailable, multiple
+ * groups are probably not supported.
+ */
+/*#define HAS_SETGROUPS / **/
+
+/* HAS_SETHOSTENT:
+ * This symbol, if defined, indicates that the sethostent() routine is
+ * available.
+ */
+/*#define HAS_SETHOSTENT / **/
+
+/* HAS_SETNETENT:
+ * This symbol, if defined, indicates that the setnetent() routine is
+ * available.
+ */
+/*#define HAS_SETNETENT / **/
+
+/* HAS_SETPROTOENT:
+ * This symbol, if defined, indicates that the setprotoent() routine is
+ * available.
+ */
+/*#define HAS_SETPROTOENT / **/
+
+/* HAS_SETPGRP:
+ * This symbol, if defined, indicates that the setpgrp routine is
+ * available to set the current process group.
+ */
+/* USE_BSD_SETPGRP:
+ * This symbol, if defined, indicates that setpgrp needs two
+ * arguments whereas USG one needs none. See also HAS_SETPGID
+ * for a POSIX interface.
+ */
+/*#define HAS_SETPGRP / **/
+/*#define USE_BSD_SETPGRP / **/
+
+/* HAS_SETPWENT:
+ * This symbol, if defined, indicates that the setpwent routine is
+ * available for initializing sequential access of the passwd database.
+ */
+/*#define HAS_SETPWENT / **/
+
+/* HAS_SETSERVENT:
+ * This symbol, if defined, indicates that the setservent() routine is
+ * available.
+ */
+/*#define HAS_SETSERVENT / **/
+
+/* HAS_SETVBUF:
+ * This symbol, if defined, indicates that the setvbuf routine is
+ * available to change buffering on an open stdio stream.
+ * to a line-buffered mode.
+ */
+/*#define HAS_SETVBUF / **/
+
+/* HAS_SHM:
+ * This symbol, if defined, indicates that the entire shm*(2) library is
+ * supported.
+ */
+/*#define HAS_SHM / **/
+
+/* Shmat_t:
+ * This symbol holds the return type of the shmat() system call.
+ * Usually set to 'void *' or 'char *'.
+ */
+/* HAS_SHMAT_PROTOTYPE:
+ * This symbol, if defined, indicates that the sys/shm.h includes
+ * a prototype for shmat(). Otherwise, it is up to the program to
+ * guess one. Shmat_t shmat(int, Shmat_t, int) is a good guess,
+ * but not always right so it should be emitted by the program only
+ * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs.
+ */
+#define Shmat_t void * /**/
+/*#define HAS_SHMAT_PROTOTYPE / **/
+
+/* HAS_SOCKET:
+ * This symbol, if defined, indicates that the BSD socket interface is
+ * supported.
+ */
+/* HAS_SOCKETPAIR:
+ * This symbol, if defined, indicates that the BSD socketpair() call is
+ * supported.
+ */
+/* HAS_MSG_CTRUNC:
+ * This symbol, if defined, indicates that the MSG_CTRUNC is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_MSG_DONTROUTE:
+ * This symbol, if defined, indicates that the MSG_DONTROUTE is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_MSG_OOB:
+ * This symbol, if defined, indicates that the MSG_OOB is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_MSG_PEEK:
+ * This symbol, if defined, indicates that the MSG_PEEK is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_MSG_PROXY:
+ * This symbol, if defined, indicates that the MSG_PROXY is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_SCM_RIGHTS:
+ * This symbol, if defined, indicates that the SCM_RIGHTS is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/*#define HAS_SOCKET / **/
+/*#define HAS_SOCKETPAIR / **/
+/*#define HAS_MSG_CTRUNC / **/
+/*#define HAS_MSG_DONTROUTE / **/
+/*#define HAS_MSG_OOB / **/
+/*#define HAS_MSG_PEEK / **/
+/*#define HAS_MSG_PROXY / **/
+/*#define HAS_SCM_RIGHTS / **/
+
+/* USE_STAT_BLOCKS:
+ * This symbol is defined if this system has a stat structure declaring
+ * st_blksize and st_blocks.
+ */
+#ifndef USE_STAT_BLOCKS
+/*#define USE_STAT_BLOCKS / **/
+#endif
+
+/* HAS_STRERROR:
+ * This symbol, if defined, indicates that the strerror routine is
+ * available to translate error numbers to strings. See the writeup
+ * of Strerror() in this file before you try to define your own.
+ */
+/* HAS_SYS_ERRLIST:
+ * This symbol, if defined, indicates that the sys_errlist array is
+ * available to translate error numbers to strings. The extern int
+ * sys_nerr gives the size of that table.
+ */
+/* Strerror:
+ * This preprocessor symbol is defined as a macro if strerror() is
+ * not available to translate error numbers to strings but sys_errlist[]
+ * array is there.
+ */
+/*#define HAS_STRERROR / **/
+/*#define HAS_SYS_ERRLIST / **/
+#define Strerror(e) strerror(e)
+
+/* HAS_STRTOUL:
+ * This symbol, if defined, indicates that the strtoul routine is
+ * available to provide conversion of strings to unsigned long.
+ */
+#define HAS_STRTOUL /**/
+
+/* HAS_UNION_SEMUN:
+ * This symbol, if defined, indicates that the union semun is
+ * defined by including <sys/sem.h>. If not, the user code
+ * probably needs to define it as:
+ * union semun {
+ * int val;
+ * struct semid_ds *buf;
+ * unsigned short *array;
+ * }
+ */
+/* USE_SEMCTL_SEMUN:
+ * This symbol, if defined, indicates that union semun is
+ * used for semctl IPC_STAT.
+ */
+/* USE_SEMCTL_SEMID_DS:
+ * This symbol, if defined, indicates that struct semid_ds * is
+ * used for semctl IPC_STAT.
+ */
+/*#define HAS_UNION_SEMUN / **/
+/*#define USE_SEMCTL_SEMUN / **/
+/*#define USE_SEMCTL_SEMID_DS / **/
+
+/* HAS_VFORK:
+ * This symbol, if defined, indicates that vfork() exists.
+ */
+/*#define HAS_VFORK / **/
+
+/* Signal_t:
+ * This symbol's value is either "void" or "int", corresponding to the
+ * appropriate return type of a signal handler. Thus, you can declare
+ * a signal handler using "Signal_t (*handler)()", and define the
+ * handler using "Signal_t handler(sig)".
+ */
+#define Signal_t int /* Signal handler's return type */
+
+/* Groups_t:
+ * This symbol holds the type used for the second argument to
+ * getgroups() and setgroups(). Usually, this is the same as
+ * gidtype (gid_t) , but sometimes it isn't.
+ * It can be int, ushort, gid_t, etc...
+ * It may be necessary to include <sys/types.h> to get any
+ * typedef'ed information. This is only required if you have
+ * getgroups() or setgroups()..
+ */
+#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
+#define Groups_t int /* Type for 2nd arg to [sg]etgroups() */
+#endif
+
+/* I_GRP:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <grp.h>.
+ */
+/* GRPASSWD:
+ * This symbol, if defined, indicates to the C program that struct group
+ * in <grp.h> contains gr_passwd.
+ */
+/*#define I_GRP / **/
+/*#define GRPASSWD / **/
+
+/* I_NDBM:
+ * This symbol, if defined, indicates that <ndbm.h> exists and should
+ * be included.
+ */
+/*#define I_NDBM / **/
+
+/* I_NETDB:
+ * This symbol, if defined, indicates that <netdb.h> exists and
+ * should be included.
+ */
+/*#define I_NETDB / **/
+
+/* I_PWD:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <pwd.h>.
+ */
+/* PWQUOTA:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_quota.
+ */
+/* PWAGE:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_age.
+ */
+/* PWCHANGE:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_change.
+ */
+/* PWCLASS:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_class.
+ */
+/* PWEXPIRE:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_expire.
+ */
+/* PWCOMMENT:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_comment.
+ */
+/* PWGECOS:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_gecos.
+ */
+/* PWPASSWD:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_passwd.
+ */
+/*#define I_PWD / **/
+/*#define PWQUOTA / **/
+/*#define PWAGE / **/
+/*#define PWCHANGE / **/
+/*#define PWCLASS / **/
+/*#define PWEXPIRE / **/
+/*#define PWCOMMENT / **/
+/*#define PWGECOS / **/
+/*#define PWPASSWD / **/
+
+/* I_SYSUIO:
+ * This symbol, if defined, indicates that <sys/uio.h> exists and
+ * should be included.
+ */
+/*#define I_SYSUIO / **/
+
+/* I_STDARG:
+ * This symbol, if defined, indicates that <stdarg.h> exists and should
+ * be included.
+ */
+/* I_VARARGS:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <varargs.h>.
+ */
+#define I_STDARG /**/
+/*#define I_VARARGS / **/
+
+/* Free_t:
+ * This variable contains the return type of free(). It is usually
+ * void, but occasionally int.
+ */
+/* Malloc_t:
+ * This symbol is the type of pointer returned by malloc and realloc.
+ */
+#define Malloc_t void * /**/
+#define Free_t int /**/
+
+/* MYMALLOC:
+ * This symbol, if defined, indicates that we're using our own malloc.
+ */
+/*#define MYMALLOC / **/
+
+/* CAN_PROTOTYPE:
+ * If defined, this macro indicates that the C compiler can handle
+ * function prototypes.
+ */
+/* _:
+ * This macro is used to declare function parameters for folks who want
+ * to make declarations with prototypes using a different style than
+ * the above macros. Use double parentheses. For example:
+ *
+ * int main _((int argc, char *argv[]));
+ */
+/*#define CAN_PROTOTYPE / **/
+#ifdef CAN_PROTOTYPE
+#define _(args) args
+#else
+#define _(args) ()
+#endif
+
+/* SH_PATH:
+ * This symbol contains the full pathname to the shell used on this
+ * on this system to execute Bourne shell scripts. Usually, this will be
+ * /bin/sh, though it's possible that some systems will have /bin/ksh,
+ * /bin/pdksh, /bin/ash, /bin/bash, or even something such as
+ * D:/bin/sh.exe.
+ */
+#define SH_PATH "" /**/
+
+/* SIG_NAME:
+ * This symbol contains a list of signal names in order of
+ * signal number. This is intended
+ * to be used as a static array initialization, like this:
+ * char *sig_name[] = { SIG_NAME };
+ * The signals in the list are separated with commas, and each signal
+ * is surrounded by double quotes. There is no leading SIG in the signal
+ * name, i.e. SIGQUIT is known as "QUIT".
+ * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
+ * etc., where nn is the actual signal number (e.g. NUM37).
+ * The signal number for sig_name[i] is stored in sig_num[i].
+ * The last element is 0 to terminate the list with a NULL. This
+ * corresponds to the 0 at the end of the sig_name_init list.
+ * Note that this variable is initialized from the sig_name_init,
+ * not from sig_name (which is unused).
+ */
+/* SIG_NUM:
+ * This symbol contains a list of signal numbers, in the same order as the
+ * SIG_NAME list. It is suitable for static array initialization, as in:
+ * int sig_num[] = { SIG_NUM };
+ * The signals in the list are separated with commas, and the indices
+ * within that list and the SIG_NAME list match, so it's easy to compute
+ * the signal name from a number or vice versa at the price of a small
+ * dynamic linear lookup.
+ * Duplicates are allowed, but are moved to the end of the list.
+ * The signal number corresponding to sig_name[i] is sig_number[i].
+ * if (i < NSIG) then sig_number[i] == i.
+ * The last element is 0, corresponding to the 0 at the end of
+ * the sig_name_init list.
+ * Note that this variable is initialized from the sig_num_init,
+ * not from sig_num (which is unused).
+ */
+/* SIG_SIZE:
+ * This variable contains the number of elements of the SIG_NAME
+ * and SIG_NUM arrays, excluding the final NULL entry.
+ */
+#define SIG_NAME 0 /**/
+#define SIG_NUM 0 /**/
+#define SIG_SIZE 1 /**/
+
+/* STDCHAR:
+ * This symbol is defined to be the type of char used in stdio.h.
+ * It has the values "unsigned char" or "char".
+ */
+#define STDCHAR char /**/
+
+/* VOIDFLAGS:
+ * This symbol indicates how much support of the void type is given by this
+ * compiler. What various bits mean:
+ *
+ * 1 = supports declaration of void
+ * 2 = supports arrays of pointers to functions returning void
+ * 4 = supports comparisons between pointers to void functions and
+ * addresses of void functions
+ * 8 = suports declaration of generic void pointers
+ *
+ * The package designer should define VOIDUSED to indicate the requirements
+ * of the package. This can be done either by #defining VOIDUSED before
+ * including config.h, or by defining defvoidused in Myinit.U. If the
+ * latter approach is taken, only those flags will be tested. If the
+ * level of void support necessary is not present, defines void to int.
+ */
+#ifndef VOIDUSED
+#define VOIDUSED 1
+#endif
+#define VOIDFLAGS 1
+#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
+#define void int /* is void to be avoided? */
+#define M_VOID /* Xenix strikes again */
+#endif
+
+/* USE_CROSS_COMPILE:
+ * This symbol, if defined, indicates that Perl is being cross-compiled.
+ */
+/* PERL_TARGETARCH:
+ * This symbol, if defined, indicates the target architecture
+ * Perl has been cross-compiled to. Undefined if not a cross-compile.
+ */
+#ifndef USE_CROSS_COMPILE
+/*#define USE_CROSS_COMPILE / **/
+#define PERL_TARGETARCH "" /**/
+#endif
+
+/* HAS_ATOLF:
+ * This symbol, if defined, indicates that the atolf routine is
+ * available to convert strings into long doubles.
+ */
+/*#define HAS_ATOLF / **/
+
+/* HAS_ATOLL:
+ * This symbol, if defined, indicates that the atoll routine is
+ * available to convert strings into long longs.
+ */
+/*#define HAS_ATOLL / **/
+
+/* HAS__FWALK:
+ * This symbol, if defined, indicates that the _fwalk system call is
+ * available to apply a function to all the file handles.
+ */
+/*#define HAS__FWALK / **/
+
+/* HAS_AINTL:
+ * This symbol, if defined, indicates that the aintl routine is
+ * available. If copysignl is also present we can emulate modfl.
+ */
+/*#define HAS_AINTL / **/
+
+/* HAS_CLASS:
+ * This symbol, if defined, indicates that the class routine is
+ * available to classify doubles. Available for example in AIX.
+ * The returned values are defined in <float.h> and are:
+ *
+ * FP_PLUS_NORM Positive normalized, nonzero
+ * FP_MINUS_NORM Negative normalized, nonzero
+ * FP_PLUS_DENORM Positive denormalized, nonzero
+ * FP_MINUS_DENORM Negative denormalized, nonzero
+ * FP_PLUS_ZERO +0.0
+ * FP_MINUS_ZERO -0.0
+ * FP_PLUS_INF +INF
+ * FP_MINUS_INF -INF
+ * FP_NANS Signaling Not a Number (NaNS)
+ * FP_NANQ Quiet Not a Number (NaNQ)
+ */
+/*#define HAS_CLASS / **/
+
+/* HAS_STRUCT_CMSGHDR:
+ * This symbol, if defined, indicates that the struct cmsghdr
+ * is supported.
+ */
+/*#define HAS_STRUCT_CMSGHDR / **/
+
+/* HAS_COPYSIGNL:
+ * This symbol, if defined, indicates that the copysignl routine is
+ * available. If aintl is also present we can emulate modfl.
+ */
+/*#define HAS_COPYSIGNL / **/
+
+/* HAS_DBMINIT_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the dbminit() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern int dbminit(char *);
+ */
+/*#define HAS_DBMINIT_PROTO / **/
+
+/* HAS_DIRFD:
+ * This manifest constant lets the C program know that dirfd
+ * is available.
+ */
+/*#define HAS_DIRFD / **/