triggers Perl to autovivify that typeglob, but it there is no legal conversion
from that type of reference to a typeglob.
+=item Cannot copy to %s in %s
+
+(P) Perl detected an attempt to copy a value to an internal type that cannot
+be directly assigned not.
+
=item Can only compress unsigned integers in pack
(F) An argument to pack("w",...) was not an integer. The BER compressed
unpack("H", "\x{2a1}")
-where the format expects to process a byte (a character with a value
+where the format expects to process a byte (a character with a value
below 256), but a higher value was provided instead. Perl uses the value
modulus 256 instead, as if you had provided:
pack("u", "\x{1f3}b")
-where the format expects to process a sequence of bytes (character with a
-value below 256), but some of the characters had a higher value. Perl
+where the format expects to process a sequence of bytes (character with a
+value below 256), but some of the characters had a higher value. Perl
uses the character values modulus 256 instead, as if you had provided:
pack("u", "\x{f3}b")
unpack("s", "\x{1f3}b")
-where the format expects to process a sequence of bytes (character with a
-value below 256), but some of the characters had a higher value. Perl
+where the format expects to process a sequence of bytes (character with a
+value below 256), but some of the characters had a higher value. Perl
uses the character values modulus 256 instead, as if you had provided:
unpack("s", "\x{f3}b")
=item Constant(%s)%s: %s in regex; marked by <-- HERE in m/%s/
-(F) The parser found inconsistencies while attempting to find
-the character name specified in the C<\N{...}> escape. Perhaps you
-forgot to load the corresponding C<charnames> pragma?
+(F) The parser found inconsistencies while attempting to find
+the character name specified in the C<\N{...}> escape. Perhaps you
+forgot to load the corresponding C<charnames> pragma?
See L<charnames>.
assertion, but that construct is only allowed when the C<use re 'eval'>
pragma is in effect. See L<perlre/(?{ code })>.
+=item EVAL without pos change exceeded limit in regex; marked by <-- HERE in m/%s/
+
+(F) You used a pattern that nested too many EVAL calls without consuming
+any text. Restructure the pattern so that text is consumed.
+
+The <-- HERE shows in the regular expression about where the problem was
+discovered.
+
=item Excessively long <> operator
(F) The contents of a <> operator may not exceed the maximum size of a
=item %s failed--call queue aborted
-(F) An untrapped exception was raised while executing a CHECK, INIT, or
-END subroutine. Processing of the remainder of the queue of such
-routines has been prematurely ended.
+(F) An untrapped exception was raised while executing a UNITCHECK,
+CHECK, INIT, or END subroutine. Processing of the remainder of the
+queue of such routines has been prematurely ended.
=item False [] range "%s" in regex; marked by <-- HERE in m/%s/
(W) Named unicode character escapes (\N{...}) may return multi-char
or zero length sequences. When such an escape is used in a character class
-its behaviour is not well defined. Check that the correct escape has
+its behaviour is not well defined. Check that the correct escape has
been used, and the correct charname handler is in scope.
=item Illegal binary digit %s
Unicode code points, and encoded in EBCDIC as UTF-EBCDIC. The UTF-EBCDIC
encoding is limited to code points no larger than 2147483647 (0x7FFFFFFF).
+=item Infinite recursion in regex; marked by <-- HERE in m/%s/
+
+(F) You used a pattern that references itself without consuming any input
+text. You should check the pattern to ensure that recursive patterns
+either consume text or fail.
+
+The <-- HERE shows in the regular expression about where the problem was
+discovered.
+
=item Insecure dependency in %s
(F) You tried to do something that the tainting mechanism didn't like.
(W printf) Perl does not understand the given format conversion. See
L<perlfunc/sprintf>.
+=item Invalid escape in the specified encoding in regex; marked by <-- HERE in m/%s/
+
+(W regexp) The numeric escape (for example C<\xHH>) of value < 256
+didn't correspond to a single character through the conversion
+from the encoding specified by the encoding pragma.
+The escape was replaced with REPLACEMENT CHARACTER (U+FFFD) instead.
+The <-- HERE shows in the regular expression about where the
+escape was discovered.
+
=item Invalid [] range "%s" in regex; marked by <-- HERE in m/%s/
(F) The range specified in a character class had a minimum character
to check the return value of your socket() call? See
L<perlfunc/listen>.
-=item Lookbehind longer than %d not implemented in regex; marked by <-- HERE in m/%s/
+=item Lookbehind longer than %d not implemented in regex m/%s/
(F) There is currently a limit on the length of string which lookbehind can
-handle. This restriction may be eased in a future release. The <-- HERE
-shows in the regular expression about where the problem was discovered.
+handle. This restriction may be eased in a future release.
=item lstat() on filehandle %s
=item Malformed UTF-8 character (%s)
-(S utf8) (F) Perl detected something that didn't comply with UTF-8
-encoding rules.
+(S utf8) (F) Perl detected a string that didn't comply with UTF-8
+encoding rules, even though it had the UTF8 flag on.
-One possible cause is that you read in data that you thought to be in
-UTF-8 but it wasn't (it was for example legacy 8-bit data). Another
-possibility is careless use of utf8::upgrade().
+One possible cause is that you set the UTF8 flag yourself for data that
+you thought to be in UTF-8 but it wasn't (it was for example legacy
+8-bit data). To guard against this, you can use Encode::decode_utf8.
+
+If you use the C<:encoding(UTF-8)> PerlIO layer for input, invalid byte
+sequences are handled gracefully, but if you use C<:utf8>, the flag is
+set without validating the data, possibly resulting in this error
+message.
+
+See also L<Encode/"Handling Malformed Data">.
=item Malformed UTF-16 surrogate
(F) You tried to unpack something that didn't comply with UTF-8 encoding
rules and perl was unable to guess how to make more progress.
+=item Maximal count of pending signals (%s) exceeded
+
+(F) Perl aborted due to a too important number of signals pending. This
+usually indicates that your operating system tried to deliver signals
+too fast (with a very high priority), starving the perl process from
+resources it would need to reach a point where it can process signals
+safely. (See L<perlipc/"Deferred Signals (Safe Signals)">.)
+
=item %s matches null string many times in regex; marked by <-- HERE in m/%s/
(W regexp) The pattern you've specified would be an infinite loop if the
=item Offset outside string
-(F) You tried to do a read/write/send/recv operation with an offset
-pointing outside the buffer. This is difficult to imagine. The sole
-exception to this is that C<sysread()>ing past the buffer will extend
-the buffer and zero pad the new area.
+(F, W layer) You tried to do a read/write/send/recv/seek operation
+with an offset pointing outside the buffer. This is difficult to
+imagine. The sole exceptions to this are that zero padding will
+take place when going past the end of the string when either
+C<sysread()>ing a file, or when seeking past the end of a scalar opened
+for I/O (in anticipation of future reads and to imitate the behaviour
+with real files).
=item %s() on unopened %s
(S internal) An internal warning that the grammar is screwed up.
+=item Opening dirhandle %s also as a file
+
+(W io deprecated) You used open() to associate a filehandle to
+a symbol (glob or scalar) that already holds a dirhandle.
+Although legal, this idiom might render your code confusing
+and is deprecated.
+
+=item Opening filehandle %s also as a directory
+
+(W io deprecated) You used opendir() to associate a dirhandle to
+a symbol (glob or scalar) that already holds a filehandle.
+Although legal, this idiom might render your code confusing
+and is deprecated.
+
=item Operation "%s": no method found, %s
(F) An attempt was made to perform an overloaded operation for which no
(P) The lexer got into a bad state while processing a case modifier.
+=item Pattern subroutine nesting without pos change exceeded limit in regex; marked by <-- HERE in m/%s/
+
+(F) You used a pattern that uses too many nested subpattern calls without
+consuming any text. Restructure the pattern so text is consumed before the
+nesting limit is exceeded.
+
+The <-- HERE shows in the regular expression about where the problem was
+discovered.
+
=item Parentheses missing around "%s" list
(W parenthesis) You said something like
=item readdir() attempted on invalid dirhandle %s
-(W io) The dirhandle you're reading from is either closed or not really
+(W io) The dirhandle you're reading from is either closed or not really
a dirhandle. Check your control flow.
=item readline() on closed filehandle %s
The <-- HERE shows in the regular expression about where the problem was
discovered.
+=item Reference to nonexistent or unclosed group in regex; marked by <-- HERE in m/%s/
+
+(F) You used something like C<\g{-7}> in your regular expression, but there are
+not at least seven sets of closed capturing parentheses in the expression before
+where the C<\g{-7}> was located.
+
+The <-- HERE shows in the regular expression about where the problem was
+discovered.
+
+=item Reference to nonexistent named group in regex; marked by <-- HERE in m/%s/
+
+(F) You used something like C<\k'NAME'> or C<< \k<NAME> >> in your regular
+expression, but there is no corresponding named capturing parentheses such
+as C<(?'NAME'...)> or C<(?<NAME>...). Check if the name has been spelled
+correctly both in the backreference and the declaration.
+
+The <-- HERE shows in the regular expression about where the problem was
+discovered.
+
+=item (?(DEFINE)....) does not allow branches in regex; marked by <-- HERE in m/%s/
+
+(F) You used something like C<(?(DEFINE)...|..)> which is illegal. The
+most likely cause of this error is that you left out a parenthesis inside
+of the C<....> part.
+
+The <-- HERE shows in the regular expression about where the problem was
+discovered.
+
=item regexp memory corruption
(P) The regular expression engine got confused by what the regular
<-- HERE shows in the regular expression about where the problem was
discovered. See L<perlre>.
+=item Sequence \\%s... not terminated in regex; marked by <-- HERE in m/%s/
+
+(F) The regular expression expects a mandatory argument following the escape
+sequence and this has been omitted or incorrectly written.
+
=item Sequence (?#... not terminated in regex; marked by <-- HERE in m/%s/
(F) A regular expression comment must be terminated by a closing
=item Too deeply nested ()-groups
-(F) Your template contains ()-groups with a ridiculously deep nesting level.
+(F) Your template contains ()-groups with a ridiculously deep nesting level.
=item Too few args to syscall
Note that if you want to enable a warnings category registered by a module
(e.g. C<use warnings 'File::Find'>), you must have imported this module
+
+=item Unknown verb pattern '%s' in regex; marked by <-- HERE in m/%s/
+
+(F) You either made a typo or have incorrectly put a C<*> quantifier
+after an open brace in your pattern. Check the pattern and review
+L<perlre> for details on legal verb patterns.
+
first.
=item unmatched [ in regex; marked by <-- HERE in m/%s/
in your Perl script (or eval). Perhaps you tried to run a compressed
script, a binary program, or a directory as a Perl program.
-=item /%s/: Unrecognized escape \\%c in character class passed through
+=item Unrecognized escape \\%c in character class passed through in regex; marked by <-- HERE in m/%s/
(W regexp) You used a backslash-character combination which is not
recognized by Perl inside character classes. The character was
understood literally.
+The <-- HERE shows in the regular expression about where the
+escape was discovered.
=item Unrecognized escape \\%c passed through
(W misc) You used a backslash-character combination which is not
-recognized by Perl.
+recognized by Perl. The character was understood literally.
=item Unrecognized escape \\%c passed through in regex; marked by <-- HERE in m/%s/
(W regexp) You used a backslash-character combination which is not
-recognized by Perl. This combination appears in an interpolated variable or
-a C<'>-delimited regular expression. The character was understood
-literally. The <-- HERE shows in the regular expression about where the
+recognized by Perl. The character was understood literally.
+The <-- HERE shows in the regular expression about where the
escape was discovered.
=item Unrecognized signal name "%s"
compressed integer format and could not be converted to an integer.
See L<perlfunc/pack>.
+=item Unterminated verb pattern in regex; marked by <-- HERE in m/%s/
+
+(F) You used a pattern of the form C<(*VERB)> but did not terminate
+the pattern with a C<)>. Fix the pattern and retry.
+
+=item Unterminated verb pattern argument in regex; marked by <-- HERE in m/%s/
+
+(F) You used a pattern of the form C<(*VERB:ARG)> but did not terminate
+the pattern with a C<)>. Fix the pattern and retry.
+
+=item Unterminated \g{...} pattern in regex; marked by <-- HERE in m/%s/
+
+(F) You missed a close brace on a \g{..} pattern (group reference) in
+a regular expression. Fix the pattern and retry.
+
=item Unterminated <> operator
(F) The lexer saw a left angle bracket in a place where it was expecting
that module. It usually means you put the wrong funny character on the
front of your variable.
-=item Variable length lookbehind not implemented in regex; marked by <-- HERE in m/%s/
+=item Variable length lookbehind not implemented in m/%s/
(F) Lookbehind is allowed only for subexpressions whose length is fixed and
-known at compile time. The <-- HERE shows in the regular expression about
-where the problem was discovered. See L<perlre>.
+known at compile time. See L<perlre>.
=item "%s" variable %s masks earlier declaration in same %s
reference variables in outer subroutines are created, they
are automatically rebound to the current values of such variables.
+=item Verb pattern '%s' has a mandatory argument in regex; marked by <-- HERE in m/%s/
+
+(F) You used a verb pattern that requires an argument. Supply an argument
+or check that you are using the right verb.
+
+=item Verb pattern '%s' may not have an argument in regex; marked by <-- HERE in m/%s/
+
+(F) You used a verb pattern that is not allowed an argument. Remove the
+argument or check that you are using the right verb.
+
=item Version number must be a constant number
(P) The attempt to translate a C<use Module n.n LIST> statement into
=item Warning: something's wrong
(W) You passed warn() an empty string (the equivalent of C<warn "">) or
-you called it with no args and C<$_> was empty.
+you called it with no args and C<$@> was empty.
=item Warning: unable to close filehandle %s properly
https://perl5.git.perl.org / perl5.git / blobdiff