# Merged on Mon Feb 6 10:22:35 EST 1995 by
# Andy Dougherty <doughera@lafcol.lafayette.edu>
+#
+# Contact dfavor@corridor.com for any of the following:
+#
+# - AIX 43x and above support
+# - gcc + threads support
+# - socks support
+#
+# Apr 99 changes:
+#
+# - use nm in AIX 43x and above
+# - gcc + threads now builds
+# [(added support for socks) Jul 99 SOCKS support rewritten]
+#
+# Notes:
+#
+# - shared libperl support is tricky. if ever libperl.a ends up
+# in /usr/local/lib/* it can override any subsequent builds of
+# that same perl release. to make sure you know where the shared
+# libperl.a is coming from do a 'dump -Hv perl' and check all the
+# library search paths in the loader header.
+#
+# it would be nice to warn the user if a libperl.a exists that is
+# going to override the current build, but that would be complex.
+#
+# better yet, a solid fix for this situation should be developed.
+#
# Configure finds setrgid and setruid, but they're useless. The man
# pages state:
alignbytes=8
-usemymalloc='n'
+case "$usemymalloc" in
+'') usemymalloc='n' ;;
+esac
+
+# Intuiting the existence of system calls under AIX is difficult,
+# at best; the safest technique is to find them empirically.
+
+# AIX 4.3.* and above default to using nm for symbol extraction
+case "$osvers" in
+ 3.*|4.1.*|4.2.*)
+ usenm='undef'
+ ;;
+ *)
+ usenm='true'
+ ;;
+esac
so="a"
-dlext="so"
+dlext="o"
+
+# Trying to set this breaks the POSIX.c compilation
# Make setsockopt work correctly. See man page.
# ccflags='-D_BSD=44'
ccflags="$ccflags -D_ALL_SOURCE -D_ANSI_C_SOURCE -D_POSIX_SOURCE"
case "$cc" in
*gcc*) ;;
- *) ccflags="$ccflags -qmaxmem=8192" ;;
+ *) ccflags="$ccflags -qmaxmem=16384" ;;
esac
nm_opt='-B'
;;
#
# Tell perl which symbols to export for dynamic linking.
case "$cc" in
-*gcc*) ccdlflags='-Xlinker -bE:perl.exp' ;;
-*) ccdlflags='-bE:perl.exp' ;;
+*gcc*) ccdlflags='-Xlinker' ;;
+esac
+# the required -bE:$installarchlib/CORE/perl.exp is added by
+# libperl.U (Configure) later.
+
+case "$ldlibpthname" in
+'') ldlibpthname=LIBPATH ;;
esac
# The first 3 options would not be needed if dynamic libs. could be linked
# symbol: boot_$(EXP) can it be auto-generated?
case "$osvers" in
3*)
-lddlflags='-H512 -T512 -bhalt:4 -bM:SRE -bI:$(PERL_INC)/perl.exp -bE:$(BASEEXT).exp -e _nostart -lc'
+ lddlflags="$lddlflags -H512 -T512 -bhalt:4 -bM:SRE -bI:$(PERL_INC)/perl.exp -bE:$(BASEEXT).exp -e _nostart -lc"
;;
*)
-lddlflags='-bhalt:4 -bM:SRE -bI:$(PERL_INC)/perl.exp -bE:$(BASEEXT).exp -b noentry -lc'
-
-;;
+ lddlflags="$lddlflags -bhalt:4 -bM:SRE -bI:$(PERL_INC)/perl.exp -bE:$(BASEEXT).exp -b noentry -lc"
+ ;;
esac
-if [ "X$usethreads" = "X$define" ]; then
- ccflags="$ccflags -DNEED_PTHREAD_INIT"
- case "$cc" in
- xlc_r | cc_r)
- ;;
- cc | '')
- cc=xlc_r # Let us be stricter.
- ;;
- *)
- cat >&4 <<EOM
-Unknown C compiler '$cc'.
-For pthreads you should use the AIX C compilers xlc_r or cc_r.
+# This script UU/usethreads.cbu will get 'called-back' by Configure
+# after it has prompted the user for whether to use threads.
+cat > UU/usethreads.cbu <<'EOCBU'
+case "$usethreads" in
+$define|true|[yY]*)
+ ccflags="$ccflags -DNEED_PTHREAD_INIT"
+ case "$cc" in
+ gcc) ;;
+ cc_r) ;;
+ cc|xlc_r)
+ echo >&4 "Switching cc to cc_r because of POSIX threads."
+ # xlc_r has been known to produce buggy code in AIX 4.3.2.
+ # (e.g. pragma/overload core dumps)
+ # --jhi@iki.fi
+ cc=cc_r
+ if test ! -e /bin/cc_r; then
+ cat >&4 <<EOM
+For pthreads you should use the AIX C compiler cc_r.
+But I cannot find it in /bin.
Cannot continue, aborting.
EOM
- exit 1
+ fi
+ ;;
+ '')
+ cc=cc_r
+ ;;
+ *)
+ cat >&4 <<EOM
+For pthreads you should use the AIX C compiler cc_r.
+(now your compiler was set to '$cc')
+Cannot continue, aborting.
+EOM
+ exit 1
+ ;;
+ esac
+
+ # Add the POSIX threads library and the re-entrant libc to lddflags.
+ set `echo X "$lddlflags"| sed -e 's/ -lc$/ -lpthreads -lc_r/'`
+ shift
+ lddlflags="$*"
+
+ # Add the POSIX threads library and the re-entrant libc to libswanted.
+ # Make sure the c_r library is before the c library or
+ # make will fail.
+ set `echo X "$libswanted "| sed -e 's/ c / pthreads c_r /'`
+ shift
+ libswanted="$*"
;;
- esac
+esac
+EOCBU
+
+# This script UU/use64bits.cbu will get 'called-back' by Configure
+# after it has prompted the user for whether to use 64 bits.
+cat > UU/use64bits.cbu <<'EOCBU'
+case "$use64bits" in
+$define|true|[yY]*)
+ case "`oslevel`" in
+ 3.*|4.[012].*)
+ cat >&4 <<EOM
+AIX `oslevel` does not support 64-bit interfaces.
+You should upgrade to at least AIX 4.2.
+EOM
+ exit 1
+ ;;
+ esac
+ ccflags="$ccflags -DUSE_LONG_LONG"
+ ccflags="$ccflags `getconf XBS5_ILP32_OFFBIG_CFLAGS 2>/dev/null`"
+
+ ldflags="$ldflags `getconf XBS5_ILP32_OFFBIG_LDFLAGS 2>/dev/null`"
+ # _Somehow_ in AIX 4.3.1.0 the above getconf call manages to
+ # insert(?) *something* to $ldflags so that later (in Configure) evaluating
+ # $ldflags causes a newline after the '-b64' (the result of the getconf).
+ # (nothing strange shows up in $ldflags even in hexdump;
+ # so it may be something in the shell, instead?)
+ # Try it out: just uncomment the below line and rerun Configure:
+# echo >& "AIX $ldflags mystery" ; exit 1
+ # Just don't ask me how AIX does it.
+ # Therefore the line re-evaluating ldflags: it seems to bypass
+ # the whatever it was AIX managed to break. --jhi
+ ldflags="`echo $ldflags`"
- # Add the POSIX threads library and the re-entrant libc.
+ libswanted="$libswanted `getconf XBS5_ILP32_OFFBIG_LIBS 2>/dev/null|sed -e 's@^-l@@' -e 's@ -l@ @g'`"
+ # When a 64-bit cc becomes available $archname64
+ # may need setting so that $archname gets it attached.
+ ;;
+esac
+EOCBU
+
+# This script UU/uselongdouble.cbu will get 'called-back' by Configure
+# after it has prompted the user for whether to use long doubles.
+cat > UU/uselongdouble.cbu <<'EOCBU'
+case "$uselongdouble" in
+$define|true|[yY]*)
+ ccflags="$ccflags -qlongdouble"
+ ;;
+esac
+EOCBU
- lddlflags=`echo $lddlflags | sed 's/ -lc$/ -lpthreads -lc_r -lc/'`
-fi
+# EOF
https://perl5.git.perl.org / perl5.git / blobdiff