#!/usr/bin/perl
# binary search maximum stack depth for arrays and hashes
-# and store it in lib/Storable/Limit.pm
+# and report it to stdout as code to set the limits
use Config;
use Cwd;
+use File::Spec;
use strict;
-my $fn = "lib/Storable/Limit.pm";
my $ptrsize = $Config{ptrsize};
my ($bad1, $bad2) = (65001, 25000);
sub QUIET () {
(defined $ENV{MAKEFLAGS} and $ENV{MAKEFLAGS} =~ /\b(s|silent|quiet)\b/
- and !defined($ENV{TRAVIS}))
+ and !defined($ENV{TRAVIS})) || @ARGV && $ARGV[0] eq "-q"
? 1 : 0
}
sub PARALLEL () {
}
if (is_miniperl()) {
- die "Should not run during miniperl\n";
+ die "Should not run using miniperl\n";
}
my $prefix = "";
if ($^O eq "MSWin32") {
# try to prevent core dumps
$prefix = "ulimit -c 0 ; ";
}
-if (@ARGV and $ARGV[0] eq '--core') {
- $ENV{PERL_CORE} = 1;
-}
my $PERL = $^X;
-if ($ENV{PERL_CORE}) {
- my $path;
- my $ldlib = $Config{ldlibpthname};
- if (-d 'dist/Storable') {
- chdir 'dist/Storable';
- $PERL = "../../$PERL" unless $PERL =~ m|^/|;
- }
- if ($ldlib) {
- $path = getcwd()."/../..";
- }
- if ($^O eq 'MSWin32' and -d '../dist/Storable') {
- chdir '..\dist\Storable';
- $PERL = "..\\..\\$PERL" unless $PERL =~ /^[A-Za-z]:\\/;
- }
- $PERL = "\"$PERL\"" if $PERL =~ / /;
- if ($ldlib and $ldlib ne 'PATH') {
- $PERL = "$ldlib=$path $PERL";
+if ($^O eq "MSWin32") {
+ require Win32;
+ my ($str, $major, $minor) = Win32::GetOSVersion();
+ if ($major < 6 || $major == 6 && $minor < 1) {
+ print "# Using defaults for older Win32\n";
+ write_limits(500, 256);
+ exit;
}
}
-
--d "lib" or mkdir "lib";
--d "lib/Storable" or mkdir "lib/Storable";
-
my ($n, $good, $bad, $found) =
(65000, 100, $bad1, undef);
-print "probe for max. stack sizes...\n" unless QUIET;
+print "# probe for max. stack sizes...\n" unless QUIET;
# -I. since we're run before pm_to_blib (which is going to copy the
# file we create) and need to load our Storable.pm, not the already
# installed Storable.pm
-my $mblib = '-Mblib -I.';
-if ($ENV{PERL_CORE}) {
- if ($^O eq 'MSWin32') {
- $mblib = '-I..\..\lib\auto -I..\..\lib';
- } else {
- $mblib = '-I../../lib/auto -I../../lib';
- }
+my $mblib = '';
+if (-d 'blib') {
+ $mblib = '-Mblib -I.';
}
-if (PARALLEL) {
- # problem with parallel builds. wait for INST_DYNAMIC linking to be done.
- # the problem is the RM_F INST_DYNAMIC race.
- print "parallel build race - wait for linker ...\n" unless QUIET;
- sleep(2.0);
+elsif (-f "Configure") {
+ $mblib = '-Ilib';
}
sub cmd {
my ($i, $try, $limit_name) = @_;
die unless $i;
- my $code = "my \$t; \$Storable::$limit_name = -1; $try for 1..$i;dclone(\$t);";
+ my $code = "my \$t; \$Storable::$limit_name = -1; $try for 1..$i;dclone(\$t); print qq/ok\n/";
my $q = ($^O eq 'MSWin32') ? '"' : "'";
"$prefix $PERL $mblib -MStorable=dclone -e$q$code$q"
sub good {
my $i = shift; # this passed
my $j = $i + abs(int(($bad - $i) / 2));
- print "Storable: determining recursion limit: $i passed, try more $j ...\n" unless QUIET;
+ print "# Storable: determining recursion limit: $i passed, try more $j ...\n" unless QUIET;
$good = $i;
if ($j <= $i) {
$found++;
sub bad {
my $i = shift; # this failed
my $j = $i - abs(int(($i - $good) / 2));
- print "Storable: determining recursion limit: $i too big, try less $j ...\n" unless QUIET;
+ print "# Storable: determining recursion limit: $i too big, try less $j ...\n" unless QUIET;
$bad = $i;
if ($j >= $i) {
$j = $good;
return $j;
}
+sub array_cmd {
+ my $depth = shift;
+ return cmd($depth, '$t=[$t]', 'recursion_limit');
+}
+
+# first check we can successfully run with a minimum level
+my $cmd = array_cmd(1);
+unless ((my $output = `$cmd`) =~ /\bok\b/) {
+ die "Cannot run probe: '$output', aborting...\n";
+}
+
+unless ($ENV{STORABLE_NOISY}) {
+ # suppress Segmentation fault messages
+ open STDERR, ">", File::Spec->devnull;
+}
+
while (!$found) {
- my $cmd = cmd($n, '$t=[$t]', 'recursion_limit');
+ my $cmd = array_cmd($n);
#print "$cmd\n" unless $QUIET;
- if (system($cmd) == 0) {
+ if (`$cmd` =~ /\bok\b/) {
$n = good($n);
} else {
$n = bad($n);
}
}
-print "MAX_DEPTH = $n\n" unless QUIET;
+print "# MAX_DEPTH = $n\n" unless QUIET;
my $max_depth = $n;
($n, $good, $bad, $found) =
while (!$found) {
my $cmd = cmd($n, '$t={1=>$t}', 'recursion_limit_hash');
#print "$cmd\n" unless $QUIET;
- if (system($cmd) == 0) {
+ if (`$cmd` =~ /\bok\b/) {
$n = good($n);
} else {
$n = bad($n);
and $n == $bad2-1)
{
# more likely the shell. travis docker ubuntu, mingw e.g.
- print "Error: Apparently your system(SHELLSTRING) cannot catch stack overflows\n"
+ print "# Apparently your system(SHELLSTRING) cannot catch stack overflows\n"
unless QUIET;
$max_depth = 512;
$n = 256;
print "MAX_DEPTH = $max_depth\n" unless QUIET;
}
-print "MAX_DEPTH_HASH = $n\n" unless QUIET;
+print "# MAX_DEPTH_HASH = $n\n" unless QUIET;
my $max_depth_hash = $n;
# Previously this calculation was done in the macro, calculate it here
# several apparently random failures here, eg. working in one
# configuration, but not in a very similar configuration.
$max_depth = int(0.6 * $max_depth);
-$max_depth_hash = int(0.6 * $max_depth);
+$max_depth_hash = int(0.6 * $max_depth_hash);
my $stack_reserve = $^O eq "MSWin32" ? 32 : 16;
if ($] ge "5.016" && !($^O eq "cygwin" && $ptrsize == 8)) {
$max_depth_hash = ($max_depth_hash >> 1) - $stack_reserve * 2;
}
-my $f;
-open $f, ">", $fn or die "$fn $!";
-print $f <<EOS;
+write_limits($max_depth, $max_depth_hash);
+
+sub write_limits {
+ my ($max_depth, $max_depth_hash) = @_;
+ print <<EOS;
# bisected by stacksize
\$Storable::recursion_limit = $max_depth
unless defined \$Storable::recursion_limit;
\$Storable::recursion_limit_hash = $max_depth_hash
unless defined \$Storable::recursion_limit_hash;
-1;
EOS
-close $f;
+}