case "$osvers" in
3*) shrpldflags="$shrpldflags -e _nostart"
;;
- *) shrpldflags="$shrpldflags -b noentry"
+ *) shrpldflags="$shrpldflags -bnoentry"
;;
esac
shrpldflags="$shrpldflags $ldflags $perllibs $cryptlib"
: Prepare dependency lists for Makefile.
dynamic_list=' '
extra_dep=''
-case "$d_cplusplus" in
-define)
- : delete as a function name will not work.
- dynamic_ext=`echo $dynamic_ext | sed 's/ODBM_File//'`
- static_ext=`echo $static_ext | sed 's/ODBM_File//'`
- ;;
-esac
for f in $dynamic_ext; do
: the dependency named here will never exist
base=`echo "$f" | sed 's/.*\///'`
mallocsrc = $mallocsrc
mallocobj = $mallocobj
-madlyh = $madlyh
madlysrc = $madlysrc
madlyobj = $madlyobj
LNS = $lns
# the dynamic loader path you are building a shared libperl.
LDLIBPTH = $ldlibpth
+# Sometimes running an executable is an adventure.
+RUN = $run
+
dynamic_ext = $dynamic_list
static_ext = $static_list
nonxs_ext = $nonxs_list
h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h opcode.h
h3 = pad.h patchlevel.h perl.h perlapi.h perly.h pp.h proto.h regcomp.h
h4 = regexp.h scope.h sv.h unixish.h util.h iperlsys.h thread.h
-h5 = utf8.h warnings.h $(madlyh)
+h5 = utf8.h warnings.h
h = $(h1) $(h2) $(h3) $(h4) $(h5)
-c1 = av.c scope.c op.c doop.c doio.c dump.c gv.c hv.c mg.c reentr.c perl.c
+c1 = av.c scope.c op.c doop.c doio.c dump.c gv.c hv.c mg.c reentr.c mro.c perl.c
c2 = perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c sv.c
c3 = taint.c toke.c util.c deb.c run.c universal.c xsutils.c pad.c globals.c
c4 = perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c
c = $(c1) $(c2) $(c3) $(c4) $(c5) miniperlmain.c perlmain.c opmini.c
-obj1 = $(madlyobj) $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT)
+obj1 = $(madlyobj) $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT) mro$(OBJ_EXT)
obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) perl$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) xsutils$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) mathoms$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT)
opmini\$(OBJ_EXT): opmini.c
\$(CCCMD) \$(PLDLFLAGS) $DPERL_EXTERNAL_GLOB opmini.c
+globals\$(OBJ_EXT): uudmap.h
+
+uudmap.h: generate_uudmap\$(EXE_EXT)
+ \$(RUN) ./generate_uudmap\$(EXE_EXT) >uudmap.h
+
+generate_uudmap\$(EXE_EXT): generate_uudmap\$(OBJ_EXT)
+ \$(CC) -o generate_uudmap \$(LDFLAGS) generate_uudmap\$(OBJ_EXT) \$(libs)
+
!GROK!THIS!
$spitshell >>Makefile <<'!NO!SUBS!'
miniperlmain$(OBJ_EXT): miniperlmain.c patchlevel.h
MINIPERLEXP = miniperl
perl5.def: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) miniperl.map
- ./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) CC_FLAGS="$(OPTIMIZE)" > perl.exp
+ ./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) CC_FLAGS="$(OPTIMIZE)" > perl5.def
!NO!SUBS!
;;
case "$useshrplib" in
true)
$spitshell >>Makefile <<'!NO!SUBS!'
+ rm -f $@
$(LD) -o $@ $(SHRPLDFLAGS) $(obj) $(DYNALOADER) $(libs)
!NO!SUBS!
case "$osname" in
$(CC) -o miniperl $(CLDFLAGS) \
`echo $(obj) | sed 's/ op$(OBJ_EXT) / /'` \
miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) $(libs)
- $(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
+ $(LDLIBPTH) $(RUN) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
!NO!SUBS!
;;
next4*)
miniperl: $& miniperlmain$(OBJ_EXT) $(obj) opmini$(OBJ_EXT)
$(CC) -o miniperl `echo $(obj) | sed 's/ op$(OBJ_EXT) / /'` \
miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) $(libs)
- $(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
+ $(LDLIBPTH) $(RUN) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
!NO!SUBS!
;;
darwin*)
$(CC) $(CLDFLAGS) $(NAMESPACEFLAGS) -o miniperl \
`echo $(obj) | sed 's/ op$(OBJ_EXT) / /'` \
miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) $(libs)
- $(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
+ $(LDLIBPTH) $(RUN) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
!NO!SUBS!
;;
*)
$(LDLIBPTH) $(CC) $(CLDFLAGS) -o miniperl \
`echo $(obj) | sed 's/ op$(OBJ_EXT) / /'` \
miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) $(libs)
- $(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
+ $(LDLIBPTH) $(RUN) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
!NO!SUBS!
;;
esac
fi
+# Some environment have no system(), which mkpport uses.
+# Let's try running the commands with shell.
+case "${osname}" in
+catamount)
+$spitshell >>Makefile <<!GROK!THIS!
+.PHONY: makeppport
+makeppport: miniperl\$(EXE_EXT) \$(CONFIGPM)
+ -@for f in Makefile.PL PPPort_pm.PL PPPort_xs.PL ppport_h.PL; do \
+ (cd ext/Devel/PPPort && `pwd`/run.sh ../../../miniperl -I../../../lib \$\$f); \
+ done
+
+!GROK!THIS!
+;;
+*)
+$spitshell >>Makefile <<'!NO!SUBS!'
+.PHONY: makeppport
+makeppport: miniperl$(EXE_EXT) $(CONFIGPM)
+ $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib mkppport
+
+!NO!SUBS!
+;;
+esac
+
$spitshell >>Makefile <<'!NO!SUBS!'
sperl$(OBJ_EXT): perl.c $(h)
preplibrary: miniperl$(EXE_EXT) $(CONFIGPM) lib/lib.pm $(PREPLIBRARY_LIBPERL)
@sh ./makedir lib/auto
@echo " AutoSplitting perl library"
- $(LDLIBPTH) ./miniperl -Ilib -e 'use AutoSplit; \
+ $(LDLIBPTH) $(RUN) ./miniperl -Ilib -e 'use AutoSplit; \
autosplit_lib_modules(@ARGV)' lib/*.pm
- $(LDLIBPTH) ./miniperl -Ilib -e 'use AutoSplit; \
+ $(LDLIBPTH) $(RUN) ./miniperl -Ilib -e 'use AutoSplit; \
autosplit_lib_modules(@ARGV)' lib/*/*.pm
$(MAKE) lib/re.pm
-.PHONY: makeppport
-makeppport: miniperl$(EXE_EXT) $(CONFIGPM)
- $(LDLIBPTH) ./miniperl -Ilib mkppport
-
lib/Config.pod: config.sh miniperl$(EXE_EXT) configpm Porting/Glossary
- $(LDLIBPTH) ./miniperl -Ilib configpm --heavy=lib/Config_heavy.pl lib/Config.pm
+ $(LDLIBPTH) $(RUN) ./miniperl -Ilib configpm
$(CONFIGPM): lib/Config.pod
lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl$(EXE_EXT) minimod.pl $(CONFIGPM)
- $(LDLIBPTH) ./miniperl minimod.pl > lib/ExtUtils/Miniperl.pm
+ $(LDLIBPTH) $(RUN) ./miniperl minimod.pl > lib/ExtUtils/Miniperl.pm
lib/re.pm: ext/re/re.pm
+ @-rm -f $@
cp ext/re/re.pm lib/re.pm
$(plextract): miniperl$(EXE_EXT) $(CONFIGPM) x2p/s2p
@-rm -f $@
- $(LDLIBPTH) ./miniperl -I`pwd`/lib $@.PL
+ $(LDLIBPTH) $(RUN) ./miniperl -I`pwd`/lib $@.PL
x2p/s2p: miniperl$(EXE_EXT) $(CONFIGPM) x2p/s2p.PL
cd x2p; $(LDLIBPTH) $(MAKE) s2p
lib/lib.pm: miniperl$(EXE_EXT) $(CONFIGPM)
@-rm -f $@
- $(LDLIBPTH) ./miniperl -Ilib lib/lib_pm.PL
+ $(LDLIBPTH) $(RUN) ./miniperl -Ilib lib/lib_pm.PL
unidatafiles $(unidatafiles): uni.data
uni.data: miniperl$(EXE_EXT) $(CONFIGPM) lib/unicore/mktables
- cd lib/unicore && $(LDLIBPTH) ../../miniperl -I../../lib mktables -w
+ cd lib/unicore && $(LDLIBPTH) $(RUN) ../../miniperl -I../../lib mktables -w
touch uni.data
extra.pods: miniperl$(EXE_EXT)
-@rm -f pod/perlvms.pod
-@test -f vms/perlvms.pod && cd pod && $(LNS) ../vms/perlvms.pod perlvms.pod && cd .. && echo "pod/perlvms.pod" >> extra.pods
-@rm -f pod/perldelta.pod
- -@test -f pod/perl595delta.pod && cd pod && $(LNS) perl595delta.pod perldelta.pod && cd .. && echo "pod/perldelta.pod" >> extra.pods # See buildtoc
+ -@test -f pod/perl5100delta.pod && cd pod && $(LNS) perl5100delta.pod perldelta.pod && cd .. && echo "pod/perldelta.pod" >> extra.pods # See buildtoc
extras.make: perl$(EXE_EXT)
- -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst`
+ -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) $(RUN) ./perl -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst`
extras.test: perl$(EXE_EXT)
- -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&test(@ARGV)' `cat extras.lst`
+ -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) $(RUN) ./perl -Ilib -MCPAN -e '@ARGV&&test(@ARGV)' `cat extras.lst`
extras.install: perl$(EXE_EXT)
- -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst`
+ -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) $(RUN) ./perl -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst`
.PHONY: install install-strip install-all install-verbose install-silent \
no-install install.perl install.man install.html
META.yml: Porting/makemeta Porting/Maintainers.pl Porting/Maintainers.pm
- $(LDLIBPTH) ./miniperl -Ilib Porting/makemeta
+ $(LDLIBPTH) $(RUN) ./miniperl -Ilib Porting/makemeta
install-strip:
$(MAKE) STRIPFLAGS=-s install DESTDIR="$(DESTDIR)"
INSTALL_DEPENDENCE = all
install.perl: $(INSTALL_DEPENDENCE) installperl
- $(LDLIBPTH) ./perl installperl --destdir=$(DESTDIR) $(INSTALLFLAGS) $(STRIPFLAGS)
- $(MAKE) extras.install
+ $(LDLIBPTH) $(RUN) ./perl installperl --destdir=$(DESTDIR) $(INSTALLFLAGS) $(STRIPFLAGS)
+ -@test ! -s extras.lst || $(MAKE) extras.install
install.man: all installman
- $(LDLIBPTH) ./perl installman --destdir=$(DESTDIR) $(INSTALLFLAGS)
+ $(LDLIBPTH) $(RUN) ./perl installman --destdir=$(DESTDIR) $(INSTALLFLAGS)
# XXX Experimental. Hardwired values, but useful for testing.
# Eventually Configure could ask for some of these values.
install.html: all installhtml
-@test -f README.vms && cd vms && $(LNS) ../README.vms README_vms.pod && cd ..
- $(LDLIBPTH) ./perl installhtml \
+ $(LDLIBPTH) $(RUN) ./perl installhtml \
--podroot=. --podpath=. --recurse \
--htmldir=$(privlib)/html \
--htmlroot=$(privlib)/html \
run_byacc:
@echo "run_byacc is obsolete; try 'make regen_perly' instead"
-# this outputs perly.h, perly.act, perly.tab, madly.h, madly.act and madly.tab
+# this outputs perly.h, perly.act and perly.tab
regen_perly:
perl regen_perly.pl
- perl regen_perly.pl madly.y
# We don't want to regenerate perly.c and perly.h, but they might
# appear out-of-date after a patch is applied or a new distribution is
perly.h: perly.y
-@sh -c true
-# Similary for madly.
-madly.c: madly.y
- -@sh -c true
-
-madly.h: madly.y
- -@sh -c true
-
# No compat3.sym here since and including the 5.004_50.
# No interp.sym since 5.005_03.
SYM = global.sym globvar.sym perlio.sym pp.sym
-SYMH = perlvars.h intrpvar.h thrdvar.h
+SYMH = perlvars.h intrpvar.h
CHMOD_W = chmod +w
.PHONY: printconfig
printconfig:
- @eval `$(LDLIBPTH) ./perl -Ilib -V:$(CONFIGVAR)`; echo $$$(CONFIGVAR)
+ @eval `$(LDLIBPTH) $(RUN) ./perl -Ilib -V:$(CONFIGVAR)`; echo $$$(CONFIGVAR)
.PHONY: clean _tidy _mopup _cleaner1 _cleaner2 \
realclean _realcleaner clobber _clobber \
- distclean veryclean _verycleaner
+ distclean veryclean _verycleaner \
+ cleanup_unpacked_files unpack_files
-clean: _tidy _mopup
+clean: cleanup_unpacked_files _tidy _mopup
-realclean: _realcleaner _mopup
+realclean: cleanup_unpacked_files _realcleaner _mopup
@echo "Note that '$(MAKE) realclean' does not delete config.sh or Policy.sh"
_clobber:
-@rm -f Cross/run-* Cross/to-* Cross/from-*
rm -f config.sh cppstdin Policy.sh extras.lst
-clobber: _realcleaner _mopup _clobber
+clobber: cleanup_unpacked_files _realcleaner _mopup _clobber
distclean: clobber
# Like distclean but also removes emacs backups and *.orig.
-veryclean: _verycleaner _mopup _clobber
+veryclean: cleanup_unpacked_files _verycleaner _mopup _clobber
-@rm -f Obsolete Wanted
# Do not 'make _mopup' directly.
_mopup:
- rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c opmini.c
+ rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c opmini.c uudmap.h generate_uudmap$(EXE_EXT)
-rmdir .depending
-@test -f extra.pods && rm -f `cat extra.pods`
-@test -f vms/README_vms.pod && rm -f vms/README_vms.pod
-rm -f perl.third lib*.so.perl.third perl.3log t/perl.third t/perl.3log
-rm -f perl.pixie lib*.so.perl.pixie lib*.so.Addrs
-rm -f perl.Addrs perl.Counts t/perl.Addrs t/perl.Counts *perl.xok
- -rm -f perlld cygwin.c ld2 libperl*.def libperl*.dll cygperl*.dll *.exe.stackdump
+ -rm -f cygwin.c libperl*.def libperl*.dll cygperl*.dll *.exe.stackdump
-rm -f perl$(EXE_EXT) suidperl$(EXE_EXT) miniperl$(EXE_EXT) $(LIBPERL) libperl.* microperl
-rm -f opcode.h-old opnames.h-old pp.sym-old pp_proto.h-old
-rm -f config.over
-@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \
$(LDLIBPTH) sh ext/util/make_ext $(CLEAN) $$x MAKE=$(MAKE) ; \
done
- $(LDLIBPTH) ./miniperl -Ilib mkppport --clean
+ -@test ! -f $(RUN) ./miniperl$(EXE_EXT) || $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib mkppport --clean
# Some systems do not support "?", so keep these files separate.
_cleaner2:
rm -f lib/.exists lib/*/.exists lib/*/*/.exists
rm -f h2ph.man pstruct
rm -rf .config
- rm -f preload
- rm -rf lib/Encode lib/Compress lib/Hash
+ rm -f preload lib/re.pm
+ rm -rf lib/Encode lib/Compress lib/Hash lib/re
rm -rf lib/IO/Compress lib/IO/Uncompress
rm -f lib/ExtUtils/ParseXS/t/XSTest.c
rm -f lib/ExtUtils/ParseXS/t/XSTest$(OBJ_EXT)
-rmdir lib/Filter/Util lib/IO/Socket
-rmdir lib/List lib/MIME lib/Scalar lib/Sys
-rmdir lib/threads lib/XS
+ -rmdir lib/CPANPLUS/Dist/Build/t/dummy-*
+ -rmdir lib/CPANPLUS/t/dummy-cpanplus lib/CPANPLUS/t/dummy-localmirror
+ -rm -f cygcrypt-0.dll cygwin1.dll
+ -rm -f lib/ExtUtils/CBuilder/t/libcompilet.dll.a
+ -rm -f lib/ExtUtils/ParseXS/t/libXSTest.dll.a
_realcleaner:
@$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=realclean
TESTFILE=TEST
-_test_prep:
+_test_prep: unpack_files
cd t && (rm -f $(PERL)$(EXE_EXT); $(LNS) ../$(PERL)$(EXE_EXT) $(PERL)$(EXE_EXT))
# Architecture-neutral stuff:
PERL=./perl $(MAKE) _test_prep
_test_tty:
- cd t && $(PERL_DEBUG) $(LDLIBPTH) $(PERL) $(TESTFILE) $(TEST_ARGS) </dev/tty
+ cd t && $(PERL_DEBUG) $(LDLIBPTH) $(PERL) $(TESTFILE) $(TEST_ARGS) $(TEST_FILES) </dev/tty
_test_notty:
- cd t && $(PERL_DEBUG) PERL_SKIP_TTY_TEST=1 $(LDLIBPTH) $(PERL) $(TESTFILE) $(TEST_ARGS)
+ cd t && $(PERL_DEBUG) PERL_SKIP_TTY_TEST=1 $(LDLIBPTH) $(PERL) $(TESTFILE) $(TEST_ARGS) $(TEST_FILES)
+
+unpack_files:
+ $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib uupacktool.pl -u -m
+
+cleanup_unpacked_files:
+ -@test ! -f $(RUN) ./miniperl$(EXE_EXT) || $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib uupacktool.pl -c
# The second branch is for testing without a tty or controlling terminal,
# see t/op/stat.t
minitest.utf16: minitest.prep
- cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \
- && $(LDLIBPTH) ./perl TEST -minitest -utf16 base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty
+ && $(LDLIBPTH) $(RUN) ./perl TEST -minitest -utf16 base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty
test.utf16 check.utf16: test_prep
PERL=./perl $(MAKE) TEST_ARGS=-utf16 _test
# is crashing.
minitest: miniperl$(EXE_EXT) lib/re.pm minitest.prep
- cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \
- && $(LDLIBPTH) ./perl TEST -minitest base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty
+ && $(LDLIBPTH) $(RUN) ./perl TEST -minitest base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty
# Test via harness
.PHONY: ok okfile oknack okfilenack nok nokfile noknack nokfilenack
ok: utilities
- $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)'
+ $(LDLIBPTH) $(RUN) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)'
okfile: utilities
- $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok
+ $(LDLIBPTH) $(RUN) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok
oknack: utilities
- $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -A
+ $(LDLIBPTH) $(RUN) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -A
okfilenack: utilities
- $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok -A
+ $(LDLIBPTH) $(RUN) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok -A
nok: utilities
- $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)'
+ $(LDLIBPTH) $(RUN) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)'
nokfile: utilities
- $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok
+ $(LDLIBPTH) $(RUN) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok
noknack: utilities
- $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -A
+ $(LDLIBPTH) $(RUN) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -A
nokfilenack: utilities
- $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok -A
+ $(LDLIBPTH) $(RUN) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok -A
.PHONY: clist hlist shlist pllist
https://perl5.git.perl.org / perl5.git / blobdiff