/* perl.c
*
- * Copyright (C) 1993, 1994, 1995, 1996, 1997, 1998, 1999,
- * 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 by Larry Wall and others
+ * Copyright (C) 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+ * 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 by Larry Wall and others
*
* You may distribute under the terms of either the GNU General Public
* License or the Artistic License, as specified in the README file.
*/
/*
- * "A ship then new they built for him/of mithril and of elven glass" --Bilbo
+ * A ship then new they built for him
+ * of mithril and of elven-glass
+ * --from Bilbo's song of Eärendil
+ *
+ * [p.236 of _The Lord of the Rings_, II/i: "Many Meetings"]
*/
/* This file contains the top-level functions that are used to create, use
* function of the interpreter; that can be found in perlmain.c
*/
-/* PSz 12 Nov 03
- *
- * Be proud that perl(1) may proclaim:
- * Setuid Perl scripts are safer than C programs ...
- * Do not abandon (deprecate) suidperl. Do not advocate C wrappers.
- *
- * The flow was: perl starts, notices script is suid, execs suidperl with same
- * arguments; suidperl opens script, checks many things, sets itself with
- * right UID, execs perl with similar arguments but with script pre-opened on
- * /dev/fd/xxx; perl checks script is as should be and does work. This was
- * insecure: see perlsec(1) for many problems with this approach.
- *
- * The "correct" flow should be: perl starts, opens script and notices it is
- * suid, checks many things, execs suidperl with similar arguments but with
- * script on /dev/fd/xxx; suidperl checks script and /dev/fd/xxx object are
- * same, checks arguments match #! line, sets itself with right UID, execs
- * perl with same arguments; perl checks many things and does work.
- *
- * (Opening the script in perl instead of suidperl, we "lose" scripts that
- * are readable to the target UID but not to the invoker. Where did
- * unreadable scripts work anyway?)
- *
- * For now, suidperl and perl are pretty much the same large and cumbersome
- * program, so suidperl can check its argument list (see comments elsewhere).
- *
- * References:
- * Original bug report:
- * http://bugs.perl.org/index.html?req=bug_id&bug_id=20010322.218
- * http://rt.perl.org/rt2/Ticket/Display.html?id=6511
- * Comments and discussion with Debian:
- * http://bugs.debian.org/203426
- * http://bugs.debian.org/220486
- * Debian Security Advisory DSA 431-1 (does not fully fix problem):
- * http://www.debian.org/security/2004/dsa-431
- * CVE candidate:
- * http://cve.mitre.org/cgi-bin/cvename.cgi?name=CAN-2003-0618
- * Previous versions of this patch sent to perl5-porters:
- * http://www.mail-archive.com/perl5-porters@perl.org/msg71953.html
- * http://www.mail-archive.com/perl5-porters@perl.org/msg75245.html
- * http://www.mail-archive.com/perl5-porters@perl.org/msg75563.html
- * http://www.mail-archive.com/perl5-porters@perl.org/msg75635.html
- *
-Paul Szabo - psz@maths.usyd.edu.au http://www.maths.usyd.edu.au:8000/u/psz/
-School of Mathematics and Statistics University of Sydney 2006 Australia
- *
- */
-/* PSz 13 Nov 03
- * Use truthful, neat, specific error messages.
- * Cannot always hide the truth; security must not depend on doing so.
- */
-
-/* PSz 18 Feb 04
- * Use global(?), thread-local fdscript for easier checks.
- * (I do not understand how we could possibly get a thread race:
- * do not all threads go through the same initialization? Or in
- * fact, are not threads started only after we get the script and
- * so know what to do? Oh well, make things super-safe...)
- */
-
#include "EXTERN.h"
#define PERL_IN_PERL_C
#include "perl.h"
static I32 read_e_script(pTHX_ int idx, SV *buf_sv, int maxlen);
-#ifdef IAMSUID
-#ifndef DOSUID
-#define DOSUID
-#endif
-#endif /* IAMSUID */
-
#ifdef SETUID_SCRIPTS_ARE_SECURE_NOW
-#ifdef DOSUID
-#undef DOSUID
-#endif
+/* Drop everything. Heck, don't even try to call it */
+# define validate_suid(validarg, scriptname, fdscript, suidscript, linestr_sv, rsfp) NOOP
+#else
+/* Drop almost everything */
+# define validate_suid(validarg, scriptname, fdscript, suidscript, linestr_sv, rsfp) S_validate_suid(aTHX_ rsfp)
#endif
#define CALL_BODY_EVAL(myop) \
if (PL_op == (myop)) \
- PL_op = Perl_pp_entereval(aTHX); \
+ PL_op = PL_ppaddr[OP_ENTEREVAL](aTHX); \
if (PL_op) \
CALLRUNOPS(aTHX);
#define CALL_BODY_SUB(myop) \
if (PL_op == (myop)) \
- PL_op = Perl_pp_entersub(aTHX); \
+ PL_op = PL_ppaddr[OP_ENTERSUB](aTHX); \
if (PL_op) \
CALLRUNOPS(aTHX);
#define CALL_LIST_BODY(cv) \
PUSHMARK(PL_stack_sp); \
- call_sv((SV*)(cv), G_EVAL|G_DISCARD);
+ call_sv(MUTABLE_SV((cv)), G_EVAL|G_DISCARD);
static void
S_init_tls_and_interp(PerlInterpreter *my_perl)
void
Perl_sys_init(int* argc, char*** argv)
{
+ dVAR;
+
+ PERL_ARGS_ASSERT_SYS_INIT;
+
PERL_UNUSED_ARG(argc); /* may not be used depending on _BODY macro */
PERL_UNUSED_ARG(argv);
PERL_SYS_INIT_BODY(argc, argv);
void
Perl_sys_init3(int* argc, char*** argv, char*** env)
{
+ dVAR;
+
+ PERL_ARGS_ASSERT_SYS_INIT3;
+
PERL_UNUSED_ARG(argc); /* may not be used depending on _BODY macro */
PERL_UNUSED_ARG(argv);
PERL_UNUSED_ARG(env);
}
void
-Perl_sys_term(pTHX)
+Perl_sys_term()
{
+ dVAR;
if (!PL_veto_cleanup) {
PERL_SYS_TERM_BODY();
}
struct IPerlProc* ipP)
{
PerlInterpreter *my_perl;
+
+ PERL_ARGS_ASSERT_PERL_ALLOC_USING;
+
/* Newx() needs interpreter, so call malloc() instead */
my_perl = (PerlInterpreter*)(*ipM->pMalloc)(ipM, sizeof(PerlInterpreter));
S_init_tls_and_interp(my_perl);
perl_construct(pTHXx)
{
dVAR;
- PERL_UNUSED_ARG(my_perl);
+
+ PERL_ARGS_ASSERT_PERL_CONSTRUCT;
+
#ifdef MULTIPLICITY
init_interp();
PL_perl_destruct_level = 1;
#else
+ PERL_UNUSED_ARG(my_perl);
if (PL_perl_destruct_level > 0)
init_interp();
#endif
sv_setpv(&PL_sv_no,PL_No);
/* value lookup in void context - happens to have the side effect
- of caching the numeric forms. */
- SvIV(&PL_sv_no);
+ of caching the numeric forms. However, as &PL_sv_no doesn't contain
+ a string that is a valid numer, we have to turn the public flags by
+ hand: */
SvNV(&PL_sv_no);
+ SvIV(&PL_sv_no);
+ SvIOK_on(&PL_sv_no);
+ SvNOK_on(&PL_sv_no);
SvREADONLY_on(&PL_sv_no);
SvREFCNT(&PL_sv_no) = (~(U32)0)/2;
sv_setpv(&PL_sv_yes,PL_Yes);
- SvIV(&PL_sv_yes);
SvNV(&PL_sv_yes);
+ SvIV(&PL_sv_yes);
SvREADONLY_on(&PL_sv_yes);
SvREFCNT(&PL_sv_yes) = (~(U32)0)/2;
PL_fdpid = newAV(); /* for remembering popen pids by fd */
PL_modglobal = newHV(); /* pointers to per-interpreter module globals */
PL_errors = newSVpvs("");
- sv_setpvn(PERL_DEBUG_PAD(0), "", 0); /* For regex debugging. */
- sv_setpvn(PERL_DEBUG_PAD(1), "", 0); /* ext/re needs these */
- sv_setpvn(PERL_DEBUG_PAD(2), "", 0); /* even without DEBUGGING. */
+ sv_setpvs(PERL_DEBUG_PAD(0), ""); /* For regex debugging. */
+ sv_setpvs(PERL_DEBUG_PAD(1), ""); /* ext/re needs these */
+ sv_setpvs(PERL_DEBUG_PAD(2), ""); /* even without DEBUGGING. */
#ifdef USE_ITHREADS
- /* First entry is an array of empty elements */
- Perl_av_create_and_push(aTHX_ &PL_regex_padav,(SV*)newAV());
+ /* First entry is a list of empty elements. It needs to be initialised
+ else all hell breaks loose in S_find_uninit_var(). */
+ Perl_av_create_and_push(aTHX_ &PL_regex_padav, newSVpvs(""));
PL_regex_pad = AvARRAY(PL_regex_padav);
#endif
#ifdef USE_REENTRANT_API
PL_timesbase.tms_cstime = 0;
#endif
+ PL_registered_mros = newHV();
+ /* Start with 1 bucket, for DFS. It's unlikely we'll need more. */
+ HvMAX(PL_registered_mros) = 0;
+
ENTER;
}
int returned_errno;
unsigned char buffer[256];
+ PERL_ARGS_ASSERT_DUMP_SV_CHILD;
+
if(sock == -1 || debug_fd == -1)
return;
perl_destruct(pTHXx)
{
dVAR;
- VOL int destruct_level; /* 0=none, 1=full, 2=full with checks */
+ VOL signed char destruct_level; /* see possible values in intrpvar.h */
HV *hv;
#ifdef DEBUG_LEAKING_SCALARS_FORK_DUMP
pid_t child;
#endif
+ PERL_ARGS_ASSERT_PERL_DESTRUCT;
+#ifndef MULTIPLICITY
PERL_UNUSED_ARG(my_perl);
+#endif
/* wait for all pseudo-forked children to finish */
PERL_WAIT_FOR_CHILDREN;
int f;
const char *where;
/* Our success message is an integer 0, and a char 0 */
- static const char success[sizeof(int) + 1];
+ static const char success[sizeof(int) + 1] = {0};
close(fd[0]);
PL_exitlist = NULL;
PL_exitlistlen = 0;
+ SvREFCNT_dec(PL_registered_mros);
+
/* jettison our possibly duplicated environment */
/* if PERL_USE_SAFE_PUTENV is defined environ will not have been copied
* so we certainly shouldn't free it here
* REGEXPs in the parent interpreter
* we need to manually ReREFCNT_dec for the clones
*/
- {
- I32 i = AvFILLp(PL_regex_padav) + 1;
- SV * const * const ary = AvARRAY(PL_regex_padav);
-
- while (i) {
- SV * const resv = ary[--i];
-
- if (SvFLAGS(resv) & SVf_BREAK) {
- /* this is PL_reg_curpm, already freed
- * flag is set in regexec.c:S_regtry
- */
- SvFLAGS(resv) &= ~SVf_BREAK;
- }
- else if(SvREPADTMP(resv)) {
- SvREPADTMP_off(resv);
- }
- else if(SvIOKp(resv)) {
- REGEXP *re = INT2PTR(REGEXP *,SvIVX(resv));
- ReREFCNT_dec(re);
- }
- }
- }
SvREFCNT_dec(PL_regex_padav);
PL_regex_padav = NULL;
PL_regex_pad = NULL;
#endif
- SvREFCNT_dec((SV*) PL_stashcache);
+ SvREFCNT_dec(MUTABLE_SV(PL_stashcache));
PL_stashcache = NULL;
/* loosen bonds of global variables */
}
/* switches */
- PL_preprocess = FALSE;
PL_minus_n = FALSE;
PL_minus_p = FALSE;
PL_minus_l = FALSE;
/* magical thingies */
- SvREFCNT_dec(PL_ofs_sv); /* $, */
- PL_ofs_sv = NULL;
+ SvREFCNT_dec(PL_ofsgv); /* *, */
+ PL_ofsgv = NULL;
SvREFCNT_dec(PL_ors_sv); /* $\ */
PL_ors_sv = NULL;
}
/* Now absolutely destruct everything, somehow or other, loops or no. */
- SvFLAGS(PL_fdpid) |= SVTYPEMASK; /* don't clean out pid table now */
- SvFLAGS(PL_strtab) |= SVTYPEMASK; /* don't clean out strtab now */
/* the 2 is for PL_fdpid and PL_strtab */
- while (PL_sv_count > 2 && sv_clean_all())
+ while (sv_clean_all() > 2)
;
- SvFLAGS(PL_fdpid) &= ~SVTYPEMASK;
- SvFLAGS(PL_fdpid) |= SVt_PVAV;
- SvFLAGS(PL_strtab) &= ~SVTYPEMASK;
- SvFLAGS(PL_strtab) |= SVt_PVHV;
-
AvREAL_off(PL_fdpid); /* no surviving entries */
SvREFCNT_dec(PL_fdpid); /* needed in io_close() */
PL_fdpid = NULL;
SV* sv;
register SV* svend;
- for (sva = PL_sv_arenaroot; sva; sva = (SV*)SvANY(sva)) {
+ for (sva = PL_sv_arenaroot; sva; sva = MUTABLE_SV(SvANY(sva))) {
svend = &sva[SvREFCNT(sva)];
for (sv = sva + 1; sv < svend; ++sv) {
if (SvTYPE(sv) != SVTYPEMASK) {
" flags=0x%"UVxf
" refcnt=%"UVuf pTHX__FORMAT "\n"
"\tallocated at %s:%d %s %s%s\n",
- (void*)sv, sv->sv_flags, sv->sv_refcnt pTHX__VALUE,
+ (void*)sv, (UV)sv->sv_flags, (UV)sv->sv_refcnt
+ pTHX__VALUE,
sv->sv_debug_file ? sv->sv_debug_file : "(unknown)",
sv->sv_debug_line,
sv->sv_debug_inpad ? "for" : "by",
}
#endif
#endif
+#ifdef DEBUG_LEAKING_SCALARS_ABORT
+ if (PL_sv_count)
+ abort();
+#endif
PL_sv_count = 0;
#ifdef PERL_DEBUG_READONLY_OPS
{
dVAR;
+ PERL_ARGS_ASSERT_PERL_FREE;
+
if (PL_veto_cleanup)
return;
*/
const char * const s = PerlEnv_getenv("PERL_DESTRUCT_LEVEL");
if (!s || atoi(s) == 0) {
+ const U32 old_debug = PL_debug;
/* Emulate the PerlHost behaviour of free()ing all memory allocated in this
thread at thread exit. */
+ if (DEBUG_m_TEST) {
+ PerlIO_puts(Perl_debug_log, "Disabling memory debugging as we "
+ "free this thread's memory\n");
+ PL_debug &= ~ DEBUG_m_FLAG;
+ }
while(aTHXx->Imemory_debug_header.next != &(aTHXx->Imemory_debug_header))
safesysfree(sTHX + (char *)(aTHXx->Imemory_debug_header.next));
+ PL_debug = old_debug;
}
}
#endif
int ret;
dJMPENV;
+ PERL_ARGS_ASSERT_PERL_PARSE;
+#ifndef MULTIPLICITY
PERL_UNUSED_ARG(my_perl);
-
-#ifdef SETUID_SCRIPTS_ARE_SECURE_NOW
-#ifdef IAMSUID
-#undef IAMSUID
- Perl_croak(aTHX_ "suidperl is no longer needed since the kernel can now execute\n\
-setuid perl scripts securely.\n");
-#endif /* IAMSUID */
#endif
#if defined(USE_HASH_SEED) || defined(USE_HASH_SEED_EXPLICIT)
return ret;
}
+#define INCPUSH_ADD_SUB_DIRS 0x01
+#define INCPUSH_ADD_OLD_VERS 0x02
+#define INCPUSH_USE_SEP 0x04
+#define INCPUSH_CAN_RELOCATE 0x08
+#define INCPUSH_UNSHIFT 0x10
+
STATIC void *
S_parse_body(pTHX_ char **env, XSINIT_t xsinit)
{
char **argv = PL_origargv;
const char *scriptname = NULL;
VOL bool dosearch = FALSE;
- const char *validarg = "";
register SV *sv;
register char c;
const char *cddir = NULL;
bool add_read_e_script = FALSE;
SvGROW(linestr_sv, 80);
- sv_setpvn(linestr_sv,"",0);
+ sv_setpvs(linestr_sv,"");
sv = newSVpvs(""); /* first used for -I flags */
SAVEFREESV(sv);
for (argc--,argv++; argc > 0; argc--,argv++) {
if (argv[0][0] != '-' || !argv[0][1])
break;
-#ifdef DOSUID
- if (*validarg)
- validarg = " PHOOEY ";
- else
- validarg = argv[0];
- /*
- * Can we rely on the kernel to start scripts with argv[1] set to
- * contain all #! line switches (the whole line)? (argv[0] is set to
- * the interpreter name, argv[2] to the script name; argv[3] and
- * above may contain other arguments.)
- */
-#endif
s = argv[0]+1;
reswitch:
switch ((c = *s)) {
if (argv[1] && !strcmp(argv[1], "Dev:Pseudo"))
break;
#endif
- forbid_setid('e', -1);
+ forbid_setid('e', FALSE);
if (!PL_e_script) {
PL_e_script = newSVpvs("");
add_read_e_script = TRUE;
goto reswitch;
case 'I': /* -I handled both here and in moreswitches() */
- forbid_setid('I', -1);
+ forbid_setid('I', FALSE);
if (!*++s && (s=argv[1]) != NULL) {
argc--,argv++;
}
if (s && *s) {
STRLEN len = strlen(s);
const char * const p = savepvn(s, len);
- incpush(p, TRUE, TRUE, FALSE, FALSE);
+ incpush(p, INCPUSH_ADD_SUB_DIRS|INCPUSH_ADD_OLD_VERS);
sv_catpvs(sv, "-I");
sv_catpvn(sv, p, len);
sv_catpvs(sv, " ");
else
Perl_croak(aTHX_ "No directory specified for -I");
break;
- case 'P':
- forbid_setid('P', -1);
- PL_preprocess = TRUE;
- s++;
- deprecate("-P");
- goto reswitch;
case 'S':
- forbid_setid('S', -1);
+ forbid_setid('S', FALSE);
dosearch = TRUE;
s++;
goto reswitch;
# ifdef PERL_MEM_LOG_TIMESTAMP
" PERL_MEM_LOG_TIMESTAMP"
# endif
+# ifdef PERL_USE_DEVEL
+ " PERL_USE_DEVEL"
+# endif
# ifdef PERL_USE_SAFE_PUTENV
" PERL_USE_SAFE_PUTENV"
# endif
# ifdef USE_SITECUSTOMIZE
" USE_SITECUSTOMIZE"
# endif
+# ifdef USE_FAST_STDIO
+ " USE_FAST_STDIO"
+# endif
, 0);
sv_catpv(opts_prog, PL_bincompat_options);
#else
sv_catpvs(opts_prog,"\"\\nCharacteristics of this binary (from libperl): \\n");
#endif
-
sv_catpvs(opts_prog," Compile-time options: $_\\n\",");
#if defined(LOCAL_PATCH_COUNT)
for (i = 1; i <= LOCAL_PATCH_COUNT; i++) {
if (PL_localpatches[i])
Perl_sv_catpvf(aTHX_ opts_prog,"q%c\t%s\n%c,",
- 0, PL_localpatches[i], 0);
+ 0, PL_localpatches[i], 0);
}
}
#endif
"\" Built under %s\\n",OSNAME);
#ifdef __DATE__
# ifdef __TIME__
- Perl_sv_catpvf(aTHX_ opts_prog,
- " Compiled at %s %s\\n\"",__DATE__,
- __TIME__);
+ sv_catpvs(opts_prog,
+ " Compiled at " __DATE__ " " __TIME__ "\\n\"");
# else
- Perl_sv_catpvf(aTHX_ opts_prog," Compiled on %s\\n\"",
- __DATE__);
+ sv_catpvs(opts_prog, " Compiled on " __DATE__ "\\n\"");
# endif
#endif
sv_catpvs(opts_prog, "; $\"=\"\\n \"; "
#endif
(s = PerlEnv_getenv("PERL5OPT")))
{
- const char *popt = s;
while (isSPACE(*s))
s++;
if (*s == '-' && *(s+1) == 'T') {
else {
char *popt_copy = NULL;
while (s && *s) {
- char *d;
+ const char *d;
while (isSPACE(*s))
s++;
if (*s == '-') {
while (++s && *s) {
if (isSPACE(*s)) {
if (!popt_copy) {
- popt_copy = SvPVX(sv_2mortal(newSVpv(popt,0)));
- s = popt_copy + (s - popt);
- d = popt_copy + (d - popt);
+ popt_copy = SvPVX(sv_2mortal(newSVpv(d,0)));
+ s = popt_copy + (s - d);
+ d = popt_copy;
}
*s++ = '\0';
break;
init_perllib();
{
- int suidscript;
- const int fdscript
- = open_script(scriptname, dosearch, sv, &suidscript, &rsfp);
+ bool suidscript = FALSE;
+
+ open_script(scriptname, dosearch, &suidscript, &rsfp);
validate_suid(validarg, scriptname, fdscript, suidscript,
- linestr_sv, rsfp);
+ linestr_sv, rsfp);
#ifndef PERL_MICRO
# if defined(SIGCHLD) || defined(SIGCLD)
#endif
) {
- /* This will croak if suidscript is >= 0, as -x cannot be used with
+ /* This will croak if suidscript is true, as -x cannot be used with
setuid scripts. */
forbid_setid('x', suidscript);
- /* Hence you can't get here if suidscript >= 0 */
+ /* Hence you can't get here if suidscript is true */
find_beginning(linestr_sv, rsfp);
if (cddir && PerlDir_chdir( (char *)cddir ) < 0)
}
}
- PL_main_cv = PL_compcv = (CV*)newSV_type(SVt_PVCV);
+ PL_main_cv = PL_compcv = MUTABLE_CV(newSV_type(SVt_PVCV));
CvUNIQUE_on(PL_compcv);
CvPADLIST(PL_compcv) = pad_new(0);
U32 out = PL_unicode & PERL_UNICODE_OUT_FLAG;
if (in) {
if (out)
- sv_setpvn(sv, ":utf8\0:utf8", 11);
+ sv_setpvs(sv, ":utf8\0:utf8");
else
- sv_setpvn(sv, ":utf8\0", 6);
+ sv_setpvs(sv, ":utf8\0");
}
else if (out)
- sv_setpvn(sv, "\0:utf8", 6);
+ sv_setpvs(sv, "\0:utf8");
SvSETMAGIC(sv);
}
}
#endif
CopLINE_set(PL_curcop, 0);
PL_curstash = PL_defstash;
- PL_preprocess = FALSE;
if (PL_e_script) {
SvREFCNT_dec(PL_e_script);
PL_e_script = NULL;
int ret = 0;
dJMPENV;
+ PERL_ARGS_ASSERT_PERL_RUN;
+#ifndef MULTIPLICITY
PERL_UNUSED_ARG(my_perl);
+#endif
oldscope = PL_scopestack_ix;
#ifdef VMS
if (!DEBUG_q_TEST)
PERL_DEBUG(PerlIO_printf(Perl_debug_log, "\nEXECUTING...\n\n"));
#endif
- DEBUG_S(PerlIO_printf(Perl_debug_log, "main thread is 0x%"UVxf"\n",
- PTR2UV(thr)));
if (PL_minus_c) {
#ifdef MACOS_TRADITIONAL
=for apidoc p||get_sv
-Returns the SV of the specified Perl scalar. If C<create> is set and the
-Perl variable does not exist then it will be created. If C<create> is not
-set and the variable does not exist then NULL is returned.
+Returns the SV of the specified Perl scalar. C<flags> are passed to
+C<gv_fetchpv>. If C<GV_ADD> is set and the
+Perl variable does not exist then it will be created. If C<flags> is zero
+and the variable does not exist then NULL is returned.
=cut
*/
SV*
-Perl_get_sv(pTHX_ const char *name, I32 create)
+Perl_get_sv(pTHX_ const char *name, I32 flags)
{
GV *gv;
- gv = gv_fetchpv(name, create, SVt_PV);
+
+ PERL_ARGS_ASSERT_GET_SV;
+
+ gv = gv_fetchpv(name, flags, SVt_PV);
if (gv)
return GvSV(gv);
return NULL;
=for apidoc p||get_av
-Returns the AV of the specified Perl array. If C<create> is set and the
-Perl variable does not exist then it will be created. If C<create> is not
-set and the variable does not exist then NULL is returned.
+Returns the AV of the specified Perl array. C<flags> are passed to
+C<gv_fetchpv>. If C<GV_ADD> is set and the
+Perl variable does not exist then it will be created. If C<flags> is zero
+and the variable does not exist then NULL is returned.
=cut
*/
AV*
-Perl_get_av(pTHX_ const char *name, I32 create)
+Perl_get_av(pTHX_ const char *name, I32 flags)
{
- GV* const gv = gv_fetchpv(name, create, SVt_PVAV);
- if (create)
+ GV* const gv = gv_fetchpv(name, flags, SVt_PVAV);
+
+ PERL_ARGS_ASSERT_GET_AV;
+
+ if (flags)
return GvAVn(gv);
if (gv)
return GvAV(gv);
=for apidoc p||get_hv
-Returns the HV of the specified Perl hash. If C<create> is set and the
-Perl variable does not exist then it will be created. If C<create> is not
-set and the variable does not exist then NULL is returned.
+Returns the HV of the specified Perl hash. C<flags> are passed to
+C<gv_fetchpv>. If C<GV_ADD> is set and the
+Perl variable does not exist then it will be created. If C<flags> is zero
+and the variable does not exist then NULL is returned.
=cut
*/
HV*
-Perl_get_hv(pTHX_ const char *name, I32 create)
+Perl_get_hv(pTHX_ const char *name, I32 flags)
{
- GV* const gv = gv_fetchpv(name, create, SVt_PVHV);
- if (create)
+ GV* const gv = gv_fetchpv(name, flags, SVt_PVHV);
+
+ PERL_ARGS_ASSERT_GET_HV;
+
+ if (flags)
return GvHVn(gv);
if (gv)
return GvHV(gv);
/* XXX this is probably not what they think they're getting.
* It has the same effect as "sub name;", i.e. just a forward
* declaration! */
+
+ PERL_ARGS_ASSERT_GET_CVN_FLAGS;
+
if ((flags & ~GV_NOADD_MASK) && !GvCVu(gv)) {
- SV *const sv = newSVpvn(name,len);
- SvFLAGS(sv) |= flags & SVf_UTF8;
+ SV *const sv = newSVpvn_flags(name, len, flags & SVf_UTF8);
return newSUB(start_subparse(FALSE, 0),
newSVOP(OP_CONST, 0, sv),
NULL, NULL);
return NULL;
}
+/* Nothing in core calls this now, but we can't replace it with a macro and
+ move it to mathoms.c as a macro would evaluate name twice. */
CV*
Perl_get_cv(pTHX_ const char *name, I32 flags)
{
+ PERL_ARGS_ASSERT_GET_CV;
+
return get_cvn_flags(name, strlen(name), flags);
}
dVAR;
dSP;
+ PERL_ARGS_ASSERT_CALL_ARGV;
+
PUSHMARK(SP);
if (argv) {
while (*argv) {
- XPUSHs(sv_2mortal(newSVpv(*argv,0)));
+ mXPUSHs(newSVpv(*argv,0));
argv++;
}
PUTBACK;
/* name of the subroutine */
/* See G_* flags in cop.h */
{
- return call_sv((SV*)get_cv(sub_name, TRUE), flags);
+ PERL_ARGS_ASSERT_CALL_PV;
+
+ return call_sv(MUTABLE_SV(get_cv(sub_name, GV_ADD)), flags);
}
/*
/* name of the subroutine */
/* See G_* flags in cop.h */
{
+ PERL_ARGS_ASSERT_CALL_METHOD;
+
return call_sv(sv_2mortal(newSVpv(methname,0)), flags | G_METHOD);
}
*/
I32
-Perl_call_sv(pTHX_ SV *sv, I32 flags)
+Perl_call_sv(pTHX_ SV *sv, VOL I32 flags)
/* See G_* flags in cop.h */
{
dVAR; dSP;
OP* const oldop = PL_op;
dJMPENV;
+ PERL_ARGS_ASSERT_CALL_SV;
+
if (flags & G_DISCARD) {
ENTER;
SAVETMPS;
}
+ if (!(flags & G_WANT)) {
+ /* Backwards compatibility - as G_SCALAR was 0, it could be omitted.
+ */
+ flags |= G_SCALAR;
+ }
Zero(&myop, 1, LOGOP);
myop.op_next = NULL;
if (!(flags & G_NOARGS))
myop.op_flags |= OPf_STACKED;
- myop.op_flags |= ((flags & G_VOID) ? OPf_WANT_VOID :
- (flags & G_ARRAY) ? OPf_WANT_LIST :
- OPf_WANT_SCALAR);
+ myop.op_flags |= OP_GIMME_REVERSE(flags);
SAVEOP();
PL_op = (OP*)&myop;
&& (PL_DBcv || (PL_DBcv = GvCV(PL_DBsub)))
/* Try harder, since this may have been a sighandler, thus
* curstash may be meaningless. */
- && (SvTYPE(sv) != SVt_PVCV || CvSTASH((CV*)sv) != PL_debstash)
+ && (SvTYPE(sv) != SVt_PVCV || CvSTASH((const CV *)sv) != PL_debstash)
&& !(flags & G_NODEBUG))
PL_op->op_private |= OPpENTERSUB_DB;
Zero(&method_op, 1, UNOP);
method_op.op_next = PL_op;
method_op.op_ppaddr = PL_ppaddr[OP_METHOD];
+ method_op.op_type = OP_METHOD;
myop.op_ppaddr = PL_ppaddr[OP_ENTERSUB];
+ myop.op_type = OP_ENTERSUB;
PL_op = (OP*)&method_op;
}
redo_body:
CALL_BODY_SUB((OP*)&myop);
retval = PL_stack_sp - (PL_stack_base + oldmark);
- if (!(flags & G_KEEPERR))
- sv_setpvn(ERRSV,"",0);
+ if (!(flags & G_KEEPERR)) {
+ CLEAR_ERRSV();
+ }
break;
case 1:
STATUS_ALL_FAILURE;
goto redo_body;
}
PL_stack_sp = PL_stack_base + oldmark;
- if (flags & G_ARRAY)
+ if ((flags & G_WANT) == G_ARRAY)
retval = 0;
else {
retval = 1;
OP* const oldop = PL_op;
dJMPENV;
+ PERL_ARGS_ASSERT_EVAL_SV;
+
if (flags & G_DISCARD) {
ENTER;
SAVETMPS;
myop.op_flags = OPf_STACKED;
myop.op_next = NULL;
myop.op_type = OP_ENTEREVAL;
- myop.op_flags |= ((flags & G_VOID) ? OPf_WANT_VOID :
- (flags & G_ARRAY) ? OPf_WANT_LIST :
- OPf_WANT_SCALAR);
+ myop.op_flags |= OP_GIMME_REVERSE(flags);
if (flags & G_KEEPERR)
myop.op_flags |= OPf_SPECIAL;
redo_body:
CALL_BODY_EVAL((OP*)&myop);
retval = PL_stack_sp - (PL_stack_base + oldmark);
- if (!(flags & G_KEEPERR))
- sv_setpvn(ERRSV,"",0);
+ if (!(flags & G_KEEPERR)) {
+ CLEAR_ERRSV();
+ }
break;
case 1:
STATUS_ALL_FAILURE;
goto redo_body;
}
PL_stack_sp = PL_stack_base + oldmark;
- if (flags & G_ARRAY)
+ if ((flags & G_WANT) == G_ARRAY)
retval = 0;
else {
retval = 1;
dSP;
SV* sv = newSVpv(p, 0);
+ PERL_ARGS_ASSERT_EVAL_PV;
+
eval_sv(sv, G_SCALAR);
SvREFCNT_dec(sv);
PUTBACK;
if (croak_on_error && SvTRUE(ERRSV)) {
- Perl_croak(aTHX_ SvPVx_nolen_const(ERRSV));
+ Perl_croak(aTHX_ "%s", SvPVx_nolen_const(ERRSV));
}
return sv;
dVAR;
dSP;
SV* sv;
+
+ PERL_ARGS_ASSERT_REQUIRE_PV;
+
PUSHSTACKi(PERLSI_REQUIRE);
PUTBACK;
sv = Perl_newSVpvf(aTHX_ "require q%c%s%c", 0, pv, 0);
POPSTACK;
}
-void
-Perl_magicname(pTHX_ const char *sym, const char *name, I32 namlen)
-{
- register GV * const gv = gv_fetchpv(sym, GV_ADD, SVt_PV);
-
- if (gv)
- sv_magic(GvSV(gv), (SV*)gv, PERL_MAGIC_sv, name, namlen);
-}
-
STATIC void
S_usage(pTHX_ const char *name) /* XXX move this out into a module ? */
{
"-[mM][-]module execute \"use/no module...\" before executing program",
"-n assume \"while (<>) { ... }\" loop around program",
"-p assume loop like -n but print line also, like sed",
-"-P run program through C preprocessor before compilation",
"-s enable rudimentary parsing for switches after programfile",
"-S look for programfile using PATH environment variable",
"-t enable tainting warnings",
};
const char * const *p = usage_msg;
+ PERL_ARGS_ASSERT_USAGE;
+
PerlIO_printf(PerlIO_stdout(),
"\nUsage: %s [switches] [--] [programfile] [arguments]",
name);
" t Trace execution",
" o Method and overloading resolution",
" c String/numeric conversions",
- " P Print profiling info, preprocessor command for -P, source file input state",
- " m Memory allocation",
+ " P Print profiling info, source file input state",
+ " m Memory and SV allocation",
" f Format processing",
" r Regular expression parsing and execution",
" x Syntax tree dump",
" H Hash dump -- usurps values()",
" X Scratchpad allocation",
" D Cleaning up",
- " S Thread synchronization",
" T Tokenising",
" R Include reference counts of dumped variables (eg when using -Ds)",
" J Do not s,t,P-debug (Jump over) opcodes within package DB",
NULL
};
int i = 0;
+
+ PERL_ARGS_ASSERT_GET_DEBUG_OPTS;
+
if (isALPHA(**s)) {
/* if adding extra options, remember to update DEBUG_MASK */
static const char debopts[] = "psltocPmfrxuUHXDSTRJvCAq";
{
dVAR;
UV rschar;
+ const char option = *s; /* used to remember option in -m/-M code */
+
+ PERL_ARGS_ASSERT_MORESWITCHES;
switch (*s) {
case '0':
PL_rs = newSVpvn(&ch, 1);
}
}
- sv_setsv(get_sv("/", TRUE), PL_rs);
+ sv_setsv(get_sv("/", GV_ADD), PL_rs);
return s + numlen;
}
case 'C':
s++;
return s;
case 'd':
- forbid_setid('d', -1);
+ forbid_setid('d', FALSE);
s++;
/* -dt indicates to the debugger that threads will be used */
/* The following permits -d:Mod to accepts arguments following an =
in the fashion that -MSome::Mod does. */
if (*s == ':' || *s == '=') {
- const char *start;
+ const char *start = ++s;
+ const char *const end = s + strlen(s);
SV * const sv = newSVpvs("use Devel::");
- start = ++s;
+
/* We now allow -d:Module=Foo,Bar */
while(isALNUM(*s) || *s==':') ++s;
if (*s != '=')
- sv_catpv(sv, start);
+ sv_catpvn(sv, start, end - start);
else {
sv_catpvn(sv, start, s-start);
/* Don't use NUL as q// delimiter here, this string goes in the
* environment. */
Perl_sv_catpvf(aTHX_ sv, " split(/,/,q{%s});", ++s);
}
- s += strlen(s);
+ s = end;
my_setenv("PERL5DB", SvPV_nolen_const(sv));
SvREFCNT_dec(sv);
}
case 'D':
{
#ifdef DEBUGGING
- forbid_setid('D', -1);
+ forbid_setid('D', FALSE);
s++;
PL_debug = get_debug_opts( (const char **)&s, 1) | DEBUG_TOP_FLAG;
#else /* !DEBUGGING */
}
return s;
case 'I': /* -I handled both here and in parse_body() */
- forbid_setid('I', -1);
+ forbid_setid('I', FALSE);
++s;
while (*s && isSPACE(*s))
++s;
p++;
} while (*p && *p != '-');
e = savepvn(s, e-s);
- incpush(e, TRUE, TRUE, FALSE, FALSE);
+ incpush(e,
+ INCPUSH_ADD_SUB_DIRS|INCPUSH_ADD_OLD_VERS|INCPUSH_UNSHIFT);
Safefree(e);
s = p;
if (*s == '-')
}
return s;
case 'M':
- forbid_setid('M', -1); /* XXX ? */
+ forbid_setid('M', FALSE); /* XXX ? */
/* FALL THROUGH */
case 'm':
- forbid_setid('m', -1); /* XXX ? */
+ forbid_setid('m', FALSE); /* XXX ? */
if (*++s) {
const char *start;
+ const char *end;
SV *sv;
const char *use = "use ";
+ bool colon = FALSE;
/* -M-foo == 'no foo' */
/* Leading space on " no " is deliberate, to make both
possibilities the same length. */
sv = newSVpvn(use,4);
start = s;
/* We allow -M'Module qw(Foo Bar)' */
- while(isALNUM(*s) || *s==':') ++s;
+ while(isALNUM(*s) || *s==':') {
+ if( *s++ == ':' ) {
+ if( *s == ':' )
+ s++;
+ else
+ colon = TRUE;
+ }
+ }
+ if (s == start)
+ Perl_croak(aTHX_ "Module name required with -%c option",
+ option);
+ if (colon)
+ Perl_croak(aTHX_ "Invalid module name %.*s with -%c option: "
+ "contains single ':'",
+ (int)(s - start), start, option);
+ end = s + strlen(s);
if (*s != '=') {
- sv_catpv(sv, start);
- if (*(start-1) == 'm') {
+ sv_catpvn(sv, start, end - start);
+ if (option == 'm') {
if (*s != '\0')
Perl_croak(aTHX_ "Can't use '%c' after -mname", *s);
sv_catpvs( sv, " ()");
}
} else {
- if (s == start)
- Perl_croak(aTHX_ "Module name required with -%c option",
- s[-1]);
sv_catpvn(sv, start, s-start);
- sv_catpvs(sv, " split(/,/,q");
- sv_catpvs(sv, "\0"); /* Use NUL as q//-delimiter. */
- sv_catpv(sv, ++s);
+ /* Use NUL as q''-delimiter. */
+ sv_catpvs(sv, " split(/,/,q\0");
+ ++s;
+ sv_catpvn(sv, s, end - s);
sv_catpvs(sv, "\0)");
}
- s += strlen(s);
+ s = end;
Perl_av_create_and_push(aTHX_ &PL_preambleav, sv);
}
else
- Perl_croak(aTHX_ "Missing argument to -%c", *(s-1));
+ Perl_croak(aTHX_ "Missing argument to -%c", option);
return s;
case 'n':
PL_minus_n = TRUE;
s++;
return s;
case 's':
- forbid_setid('s', -1);
+ forbid_setid('s', FALSE);
PL_doswitches = TRUE;
s++;
return s;
if (!sv_derived_from(PL_patchlevel, "version"))
upg_version(PL_patchlevel, TRUE);
#if !defined(DGUX)
- PerlIO_printf(PerlIO_stdout(),
- Perl_form(aTHX_ "\nThis is perl, %"SVf
+ {
+ SV* level= vstringify(PL_patchlevel);
#ifdef PERL_PATCHNUM
- " DEVEL" STRINGIFY(PERL_PATCHNUM)
-#endif
- " built for %s",
- SVfARG(vstringify(PL_patchlevel)),
- ARCHNAME));
+# ifdef PERL_GIT_UNCOMMITTED_CHANGES
+ SV *num = newSVpvs(PERL_PATCHNUM "*");
+# else
+ SV *num = newSVpvs(PERL_PATCHNUM);
+# endif
+
+ if (sv_len(num)>=sv_len(level) && strnEQ(SvPV_nolen(num),SvPV_nolen(level),sv_len(level))) {
+ SvREFCNT_dec(level);
+ level= num;
+ } else {
+ Perl_sv_catpvf(aTHX_ level, " (%"SVf")", num);
+ SvREFCNT_dec(num);
+ }
+ #endif
+ PerlIO_printf(PerlIO_stdout(),
+ "\nThis is perl, %"SVf
+ " built for %s",
+ level,
+ ARCHNAME);
+ SvREFCNT_dec(level);
+ }
#else /* DGUX */
/* Adjust verbose output as in the perl that ships with the DG/UX OS from EMC */
PerlIO_printf(PerlIO_stdout(),
Perl_form(aTHX_ " OS Specific Release: %s\n",
OSVERS));
#endif /* !DGUX */
-
#if defined(LOCAL_PATCH_COUNT)
if (LOCAL_PATCH_COUNT > 0)
PerlIO_printf(PerlIO_stdout(),
#endif
PerlIO_printf(PerlIO_stdout(),
- "\n\nCopyright 1987-2007, Larry Wall\n");
+ "\n\nCopyright 1987-2009, Larry Wall\n");
#ifdef MACOS_TRADITIONAL
PerlIO_printf(PerlIO_stdout(),
"\nMac OS port Copyright 1991-2002, Matthias Neeracher;\n"
return s;
case '*':
case ' ':
- if (s[1] == '-') /* Additional switches on #! line. */
- return s+2;
+ while( *s == ' ' )
+ ++s;
+ if (s[0] == '-') /* Additional switches on #! line. */
+ return s+1;
break;
case '-':
case 0:
case 'S': /* OS/2 needs -S on "extproc" line. */
break;
#endif
- case 'P':
- if (PL_preprocess)
- return s+1;
- /* FALL THROUGH */
default:
Perl_croak(aTHX_ "Can't emulate -%.1s on #! line",s);
}
of the SvREFCNT_dec, only to add it again with hv_name_set */
SvREFCNT_dec(GvHV(gv));
hv_name_set(PL_defstash, "main", 4, 0);
- GvHV(gv) = (HV*)SvREFCNT_inc_simple(PL_defstash);
+ GvHV(gv) = MUTABLE_HV(SvREFCNT_inc_simple(PL_defstash));
SvREADONLY_on(gv);
PL_incgv = gv_HVadd(gv_AVadd(gv_fetchpvs("INC", GV_ADD|GV_NOTQUAL,
SVt_PVAV)));
gv_SVadd(PL_errgv);
#endif
sv_grow(ERRSV, 240); /* Preallocate - for immediate signals. */
- sv_setpvn(ERRSV, "", 0);
+ CLEAR_ERRSV();
PL_curstash = PL_defstash;
CopSTASH_set(&PL_compiling, PL_defstash);
PL_debstash = GvHV(gv_fetchpvs("DB::", GV_ADDMULTI, SVt_PVHV));
PL_globalstash = GvHV(gv_fetchpvs("CORE::GLOBAL::", GV_ADDMULTI,
SVt_PVHV));
/* We must init $/ before switches are processed. */
- sv_setpvn(get_sv("/", TRUE), "\n", 1);
+ sv_setpvs(get_sv("/", GV_ADD), "\n");
}
STATIC int
-S_open_script(pTHX_ const char *scriptname, bool dosearch, SV *sv,
- int *suidscript, PerlIO **rsfpp)
+S_open_script(pTHX_ const char *scriptname, bool dosearch,
+ bool *suidscript, PerlIO **rsfpp)
{
-#ifndef IAMSUID
- const char *quote;
- const char *code;
- const char *cpp_discard_flag;
- const char *perl;
-#endif
int fdscript = -1;
dVAR;
- *suidscript = -1;
+ PERL_ARGS_ASSERT_OPEN_SCRIPT;
if (PL_e_script) {
PL_origfilename = savepvs("-e");
* Is it a mistake to use a similar /dev/fd/ construct for
* suidperl?
*/
- *suidscript = 1;
+ *suidscript = TRUE;
/* PSz 20 Feb 04
* Be supersafe and do some sanity-checks.
* Still, can we be sure we got the right thing?
fcntl(PerlIO_fileno(*rsfpp),F_SETFD,1);
# endif
}
-#ifdef IAMSUID
- else {
- Perl_croak(aTHX_ "sperl needs fd script\n"
- "You should not call sperl directly; do you need to "
- "change a #! line\nfrom sperl to perl?\n");
-
-/* PSz 11 Nov 03
- * Do not open (or do other fancy stuff) while setuid.
- * Perl does the open, and hands script to suidperl on a fd;
- * suidperl only does some checks, sets up UIDs and re-execs
- * perl with that fd as it has always done.
- */
- }
- if (*suidscript != 1) {
- Perl_croak(aTHX_ "suidperl needs (suid) fd script\n");
- }
-#else /* IAMSUID */
- else if (PL_preprocess) {
- const char * const cpp_cfg = CPPSTDIN;
- SV * const cpp = newSVpvs("");
- SV * const cmd = newSV(0);
-
- if (cpp_cfg[0] == 0) /* PERL_MICRO? */
- Perl_croak(aTHX_ "Can't run with cpp -P with CPPSTDIN undefined");
- if (strEQ(cpp_cfg, "cppstdin"))
- Perl_sv_catpvf(aTHX_ cpp, "%s/", BIN_EXP);
- sv_catpv(cpp, cpp_cfg);
-
-# ifndef VMS
- sv_catpvs(sv, "-I");
- sv_catpv(sv,PRIVLIB_EXP);
-# endif
-
- DEBUG_P(PerlIO_printf(Perl_debug_log,
- "PL_preprocess: scriptname=\"%s\", cpp=\"%s\", sv=\"%s\", CPPMINUS=\"%s\"\n",
- scriptname, SvPVX_const (cpp), SvPVX_const (sv),
- CPPMINUS));
-
-# if defined(MSDOS) || defined(WIN32) || defined(VMS)
- quote = "\"";
-# else
- quote = "'";
-# endif
-
-# ifdef VMS
- cpp_discard_flag = "";
-# else
- cpp_discard_flag = "-C";
-# endif
-
-# ifdef OS2
- perl = os2_execname(aTHX);
-# else
- perl = PL_origargv[0];
-# endif
-
-
- /* This strips off Perl comments which might interfere with
- the C pre-processor, including #!. #line directives are
- deliberately stripped to avoid confusion with Perl's version
- of #line. FWP played some golf with it so it will fit
- into VMS's 255 character buffer.
- */
- if( PL_doextract )
- code = "(1../^#!.*perl/i)|/^\\s*#(?!\\s*((ifn?|un)def|(el|end)?if|define|include|else|error|pragma)\\b)/||!($|=1)||print";
- else
- code = "/^\\s*#(?!\\s*((ifn?|un)def|(el|end)?if|define|include|else|error|pragma)\\b)/||!($|=1)||print";
-
- Perl_sv_setpvf(aTHX_ cmd, "\
-%s -ne%s%s%s %s | %"SVf" %s %"SVf" %s",
- perl, quote, code, quote, scriptname, SVfARG(cpp),
- cpp_discard_flag, SVfARG(sv), CPPMINUS);
-
- PL_doextract = FALSE;
-
- DEBUG_P(PerlIO_printf(Perl_debug_log,
- "PL_preprocess: cmd=\"%s\"\n",
- SvPVX_const(cmd)));
-
- *rsfpp = PerlProc_popen((char *)SvPVX_const(cmd), (char *)"r");
- SvREFCNT_dec(cmd);
- SvREFCNT_dec(cpp);
- }
else if (!*scriptname) {
forbid_setid(0, *suidscript);
*rsfpp = PerlIO_stdin();
fcntl(PerlIO_fileno(*rsfpp),F_SETFD,1);
# endif
}
-#endif /* IAMSUID */
if (!*rsfpp) {
/* PSz 16 Sep 03 Keep neat error message */
if (PL_e_script)
* I_MNTENT HAS_GETMNTENT HAS_HASMNTOPT
* here so that metaconfig picks them up. */
-#ifdef IAMSUID
-STATIC int
-S_fd_on_nosuid_fs(pTHX_ int fd)
-{
-/* PSz 27 Feb 04
- * We used to do this as "plain" user (after swapping UIDs with setreuid);
- * but is needed also on machines without setreuid.
- * Seems safe enough to run as root.
- */
- int check_okay = 0; /* able to do all the required sys/libcalls */
- int on_nosuid = 0; /* the fd is on a nosuid fs */
- /* PSz 12 Nov 03
- * Need to check noexec also: nosuid might not be set, the average
- * sysadmin would say that nosuid is irrelevant once he sets noexec.
- */
- int on_noexec = 0; /* the fd is on a noexec fs */
-
-/*
- * Preferred order: fstatvfs(), fstatfs(), ustat()+getmnt(), getmntent().
- * fstatvfs() is UNIX98.
- * fstatfs() is 4.3 BSD.
- * ustat()+getmnt() is pre-4.3 BSD.
- * getmntent() is O(number-of-mounted-filesystems) and can hang on
- * an irrelevant filesystem while trying to reach the right one.
- */
-
-#undef FD_ON_NOSUID_CHECK_OKAY /* found the syscalls to do the check? */
-
-# if !defined(FD_ON_NOSUID_CHECK_OKAY) && \
- defined(HAS_FSTATVFS)
-# define FD_ON_NOSUID_CHECK_OKAY
- struct statvfs stfs;
-
- check_okay = fstatvfs(fd, &stfs) == 0;
- on_nosuid = check_okay && (stfs.f_flag & ST_NOSUID);
-#ifdef ST_NOEXEC
- /* ST_NOEXEC certainly absent on AIX 5.1, and doesn't seem to be documented
- on platforms where it is present. */
- on_noexec = check_okay && (stfs.f_flag & ST_NOEXEC);
-#endif
-# endif /* fstatvfs */
-
-# if !defined(FD_ON_NOSUID_CHECK_OKAY) && \
- defined(PERL_MOUNT_NOSUID) && \
- defined(PERL_MOUNT_NOEXEC) && \
- defined(HAS_FSTATFS) && \
- defined(HAS_STRUCT_STATFS) && \
- defined(HAS_STRUCT_STATFS_F_FLAGS)
-# define FD_ON_NOSUID_CHECK_OKAY
- struct statfs stfs;
-
- check_okay = fstatfs(fd, &stfs) == 0;
- on_nosuid = check_okay && (stfs.f_flags & PERL_MOUNT_NOSUID);
- on_noexec = check_okay && (stfs.f_flags & PERL_MOUNT_NOEXEC);
-# endif /* fstatfs */
-
-# if !defined(FD_ON_NOSUID_CHECK_OKAY) && \
- defined(PERL_MOUNT_NOSUID) && \
- defined(PERL_MOUNT_NOEXEC) && \
- defined(HAS_FSTAT) && \
- defined(HAS_USTAT) && \
- defined(HAS_GETMNT) && \
- defined(HAS_STRUCT_FS_DATA) && \
- defined(NOSTAT_ONE)
-# define FD_ON_NOSUID_CHECK_OKAY
- Stat_t fdst;
-
- if (fstat(fd, &fdst) == 0) {
- struct ustat us;
- if (ustat(fdst.st_dev, &us) == 0) {
- struct fs_data fsd;
- /* NOSTAT_ONE here because we're not examining fields which
- * vary between that case and STAT_ONE. */
- if (getmnt((int*)0, &fsd, (int)0, NOSTAT_ONE, us.f_fname) == 0) {
- size_t cmplen = sizeof(us.f_fname);
- if (sizeof(fsd.fd_req.path) < cmplen)
- cmplen = sizeof(fsd.fd_req.path);
- if (strnEQ(fsd.fd_req.path, us.f_fname, cmplen) &&
- fdst.st_dev == fsd.fd_req.dev) {
- check_okay = 1;
- on_nosuid = fsd.fd_req.flags & PERL_MOUNT_NOSUID;
- on_noexec = fsd.fd_req.flags & PERL_MOUNT_NOEXEC;
- }
- }
- }
- }
-# endif /* fstat+ustat+getmnt */
-
-# if !defined(FD_ON_NOSUID_CHECK_OKAY) && \
- defined(HAS_GETMNTENT) && \
- defined(HAS_HASMNTOPT) && \
- defined(MNTOPT_NOSUID) && \
- defined(MNTOPT_NOEXEC)
-# define FD_ON_NOSUID_CHECK_OKAY
- FILE *mtab = fopen("/etc/mtab", "r");
- struct mntent *entry;
- Stat_t stb, fsb;
-
- if (mtab && (fstat(fd, &stb) == 0)) {
- while (entry = getmntent(mtab)) {
- if (stat(entry->mnt_dir, &fsb) == 0
- && fsb.st_dev == stb.st_dev)
- {
- /* found the filesystem */
- check_okay = 1;
- if (hasmntopt(entry, MNTOPT_NOSUID))
- on_nosuid = 1;
- if (hasmntopt(entry, MNTOPT_NOEXEC))
- on_noexec = 1;
- break;
- } /* A single fs may well fail its stat(). */
- }
- }
- if (mtab)
- fclose(mtab);
-# endif /* getmntent+hasmntopt */
-
- if (!check_okay)
- Perl_croak(aTHX_ "Can't check filesystem of script \"%s\" for nosuid/noexec", PL_origfilename);
- if (on_nosuid)
- Perl_croak(aTHX_ "Setuid script \"%s\" on nosuid filesystem", PL_origfilename);
- if (on_noexec)
- Perl_croak(aTHX_ "Setuid script \"%s\" on noexec filesystem", PL_origfilename);
- return ((!check_okay) || on_nosuid || on_noexec);
-}
-#endif /* IAMSUID */
+#ifdef SETUID_SCRIPTS_ARE_SECURE_NOW
+/* Don't even need this function. */
+#else
STATIC void
-S_validate_suid(pTHX_ const char *validarg, const char *scriptname,
- int fdscript, int suidscript, SV *linestr_sv, PerlIO *rsfp)
+S_validate_suid(pTHX_ PerlIO *rsfp)
{
- dVAR;
-#ifdef IAMSUID
- /* int which; */
-#endif /* IAMSUID */
-
- /* do we need to emulate setuid on scripts? */
-
- /* This code is for those BSD systems that have setuid #! scripts disabled
- * in the kernel because of a security problem. Merely defining DOSUID
- * in perl will not fix that problem, but if you have disabled setuid
- * scripts in the kernel, this will attempt to emulate setuid and setgid
- * on scripts that have those now-otherwise-useless bits set. The setuid
- * root version must be called suidperl or sperlN.NNN. If regular perl
- * discovers that it has opened a setuid script, it calls suidperl with
- * the same argv that it had. If suidperl finds that the script it has
- * just opened is NOT setuid root, it sets the effective uid back to the
- * uid. We don't just make perl setuid root because that loses the
- * effective uid we had before invoking perl, if it was different from the
- * uid.
- * PSz 27 Feb 04
- * Description/comments above do not match current workings:
- * suidperl must be hardlinked to sperlN.NNN (that is what we exec);
- * suidperl called with script open and name changed to /dev/fd/N/X;
- * suidperl croaks if script is not setuid;
- * making perl setuid would be a huge security risk (and yes, that
- * would lose any euid we might have had).
- *
- * DOSUID must be defined in both perl and suidperl, and IAMSUID must
- * be defined in suidperl only. suidperl must be setuid root. The
- * Configure script will set this up for you if you want it.
- */
-
-#ifdef DOSUID
- const char *s, *s2;
-
- if (PerlLIO_fstat(PerlIO_fileno(rsfp),&PL_statbuf) < 0) /* normal stat is insecure */
- Perl_croak(aTHX_ "Can't stat script \"%s\"",PL_origfilename);
- if (PL_statbuf.st_mode & (S_ISUID|S_ISGID)) {
- I32 len;
- const char *linestr;
- const char *s_end;
-
-# ifdef IAMSUID
- if (fdscript < 0 || suidscript != 1)
- Perl_croak(aTHX_ "Need (suid) fdscript in suidperl\n"); /* We already checked this */
- /* PSz 11 Nov 03
- * Since the script is opened by perl, not suidperl, some of these
- * checks are superfluous. Leaving them in probably does not lower
- * security(?!).
- */
- /* PSz 27 Feb 04
- * Do checks even for systems with no HAS_SETREUID.
- * We used to swap, then re-swap UIDs with
-# ifdef HAS_SETREUID
- if (setreuid(PL_euid,PL_uid) < 0
- || PerlProc_getuid() != PL_euid || PerlProc_geteuid() != PL_uid)
- Perl_croak(aTHX_ "Can't swap uid and euid");
-# endif
-# ifdef HAS_SETREUID
- if (setreuid(PL_uid,PL_euid) < 0
- || PerlProc_getuid() != PL_uid || PerlProc_geteuid() != PL_euid)
- Perl_croak(aTHX_ "Can't reswap uid and euid");
-# endif
- */
-
- /* On this access check to make sure the directories are readable,
- * there is actually a small window that the user could use to make
- * filename point to an accessible directory. So there is a faint
- * chance that someone could execute a setuid script down in a
- * non-accessible directory. I don't know what to do about that.
- * But I don't think it's too important. The manual lies when
- * it says access() is useful in setuid programs.
- *
- * So, access() is pretty useless... but not harmful... do anyway.
- */
- if (PerlLIO_access(CopFILE(PL_curcop),1)) { /*double check*/
- Perl_croak(aTHX_ "Can't access() script\n");
- }
-
- /* If we can swap euid and uid, then we can determine access rights
- * with a simple stat of the file, and then compare device and
- * inode to make sure we did stat() on the same file we opened.
- * Then we just have to make sure he or she can execute it.
- *
- * PSz 24 Feb 04
- * As the script is opened by perl, not suidperl, we do not need to
- * care much about access rights.
- *
- * The 'script changed' check is needed, or we can get lied to
- * about $0 with e.g.
- * suidperl /dev/fd/4//bin/x 4<setuidscript
- * Without HAS_SETREUID, is it safe to stat() as root?
- *
- * Are there any operating systems that pass /dev/fd/xxx for setuid
- * scripts, as suggested/described in perlsec(1)? Surely they do not
- * pass the script name as we do, so the "script changed" test would
- * fail for them... but we never get here with
- * SETUID_SCRIPTS_ARE_SECURE_NOW defined.
- *
- * This is one place where we must "lie" about return status: not
- * say if the stat() failed. We are doing this as root, and could
- * be tricked into reporting existence or not of files that the
- * "plain" user cannot even see.
- */
- {
- Stat_t tmpstatbuf;
- if (PerlLIO_stat(CopFILE(PL_curcop),&tmpstatbuf) < 0 ||
- tmpstatbuf.st_dev != PL_statbuf.st_dev ||
- tmpstatbuf.st_ino != PL_statbuf.st_ino) {
- Perl_croak(aTHX_ "Setuid script changed\n");
- }
-
- }
- if (!cando(S_IXUSR,FALSE,&PL_statbuf)) /* can real uid exec? */
- Perl_croak(aTHX_ "Real UID cannot exec script\n");
-
- /* PSz 27 Feb 04
- * We used to do this check as the "plain" user (after swapping
- * UIDs). But the check for nosuid and noexec filesystem is needed,
- * and should be done even without HAS_SETREUID. (Maybe those
- * operating systems do not have such mount options anyway...)
- * Seems safe enough to do as root.
- */
-# if !defined(NO_NOSUID_CHECK)
- if (fd_on_nosuid_fs(PerlIO_fileno(rsfp))) {
- Perl_croak(aTHX_ "Setuid script on nosuid or noexec filesystem\n");
- }
-# endif
-# endif /* IAMSUID */
+ PERL_ARGS_ASSERT_VALIDATE_SUID;
- if (!S_ISREG(PL_statbuf.st_mode)) {
- Perl_croak(aTHX_ "Setuid script not plain file\n");
- }
- if (PL_statbuf.st_mode & S_IWOTH)
- Perl_croak(aTHX_ "Setuid/gid script is writable by world");
- PL_doswitches = FALSE; /* -s is insecure in suid */
- /* PSz 13 Nov 03 But -s was caught elsewhere ... so unsetting it here is useless(?!) */
- CopLINE_inc(PL_curcop);
- if (sv_gets(linestr_sv, rsfp, 0) == NULL)
- Perl_croak(aTHX_ "No #! line");
- linestr = SvPV_nolen_const(linestr_sv);
- /* required even on Sys V */
- if (!*linestr || !linestr[1] || strnNE(linestr,"#!",2))
- Perl_croak(aTHX_ "No #! line");
- linestr += 2;
- s = linestr;
- /* PSz 27 Feb 04 */
- /* Sanity check on line length */
- s_end = s + strlen(s);
- if (s_end == s || (s_end - s) > 4000)
- Perl_croak(aTHX_ "Very long #! line");
- /* Allow more than a single space after #! */
- while (isSPACE(*s)) s++;
- /* Sanity check on buffer end */
- while ((*s) && !isSPACE(*s)) s++;
- for (s2 = s; (s2 > linestr &&
- (isDIGIT(s2[-1]) || s2[-1] == '.' || s2[-1] == '_'
- || s2[-1] == '-')); s2--) ;
- /* Sanity check on buffer start */
- if ( (s2-4 < linestr || strnNE(s2-4,"perl",4)) &&
- (s-9 < linestr || strnNE(s-9,"perl",4)) )
- Perl_croak(aTHX_ "Not a perl script");
- while (*s == ' ' || *s == '\t') s++;
- /*
- * #! arg must be what we saw above. They can invoke it by
- * mentioning suidperl explicitly, but they may not add any strange
- * arguments beyond what #! says if they do invoke suidperl that way.
- */
- /*
- * The way validarg was set up, we rely on the kernel to start
- * scripts with argv[1] set to contain all #! line switches (the
- * whole line).
- */
- /*
- * Check that we got all the arguments listed in the #! line (not
- * just that there are no extraneous arguments). Might not matter
- * much, as switches from #! line seem to be acted upon (also), and
- * so may be checked and trapped in perl. But, security checks must
- * be done in suidperl and not deferred to perl. Note that suidperl
- * does not get around to parsing (and checking) the switches on
- * the #! line (but execs perl sooner).
- * Allow (require) a trailing newline (which may be of two
- * characters on some architectures?) (but no other trailing
- * whitespace).
- */
- len = strlen(validarg);
- if (strEQ(validarg," PHOOEY ") ||
- strnNE(s,validarg,len) || !isSPACE(s[len]) ||
- !((s_end - s) == len+1
- || ((s_end - s) == len+2 && isSPACE(s[len+1]))))
- Perl_croak(aTHX_ "Args must match #! line");
-
-# ifndef IAMSUID
- if (fdscript < 0 &&
- PL_euid != PL_uid && (PL_statbuf.st_mode & S_ISUID) &&
- PL_euid == PL_statbuf.st_uid)
- if (!PL_do_undump)
- Perl_croak(aTHX_ "YOU HAVEN'T DISABLED SET-ID SCRIPTS IN THE KERNEL YET!\n\
-FIX YOUR KERNEL, OR PUT A C WRAPPER AROUND THIS SCRIPT!\n");
-# endif /* IAMSUID */
-
- if (fdscript < 0 &&
- PL_euid) { /* oops, we're not the setuid root perl */
- /* PSz 18 Feb 04
- * When root runs a setuid script, we do not go through the same
- * steps of execing sperl and then perl with fd scripts, but
- * simply set up UIDs within the same perl invocation; so do
- * not have the same checks (on options, whatever) that we have
- * for plain users. No problem really: would have to be a script
- * that does not actually work for plain users; and if root is
- * foolish and can be persuaded to run such an unsafe script, he
- * might run also non-setuid ones, and deserves what he gets.
- *
- * Or, we might drop the PL_euid check above (and rely just on
- * fdscript to avoid loops), and do the execs
- * even for root.
- */
-# ifndef IAMSUID
- int which;
- /* PSz 11 Nov 03
- * Pass fd script to suidperl.
- * Exec suidperl, substituting fd script for scriptname.
- * Pass script name as "subdir" of fd, which perl will grok;
- * in fact will use that to distinguish this from "normal"
- * usage, see comments above.
- */
- PerlIO_rewind(rsfp);
- PerlLIO_lseek(PerlIO_fileno(rsfp),(Off_t)0,0); /* just in case rewind didn't */
- /* PSz 27 Feb 04 Sanity checks on scriptname */
- if ((!scriptname) || (!*scriptname) ) {
- Perl_croak(aTHX_ "No setuid script name\n");
- }
- if (*scriptname == '-') {
- Perl_croak(aTHX_ "Setuid script name may not begin with dash\n");
- /* Or we might confuse it with an option when replacing
- * name in argument list, below (though we do pointer, not
- * string, comparisons).
- */
- }
- for (which = 1; PL_origargv[which] && PL_origargv[which] != scriptname; which++) ;
- if (!PL_origargv[which]) {
- Perl_croak(aTHX_ "Can't change argv to have fd script\n");
- }
- PL_origargv[which] = savepv(Perl_form(aTHX_ "/dev/fd/%d/%s",
- PerlIO_fileno(rsfp), PL_origargv[which]));
-# if defined(HAS_FCNTL) && defined(F_SETFD)
- fcntl(PerlIO_fileno(rsfp),F_SETFD,0); /* ensure no close-on-exec */
-# endif
- PERL_FPU_PRE_EXEC
- PerlProc_execv(Perl_form(aTHX_ "%s/sperl"PERL_FS_VER_FMT, BIN_EXP,
- (int)PERL_REVISION, (int)PERL_VERSION,
- (int)PERL_SUBVERSION), PL_origargv);
- PERL_FPU_POST_EXEC
-# endif /* IAMSUID */
- Perl_croak(aTHX_ "Can't do setuid (cannot exec sperl)\n");
- }
-
- if (PL_statbuf.st_mode & S_ISGID && PL_statbuf.st_gid != PL_egid) {
-/* PSz 26 Feb 04
- * This seems back to front: we try HAS_SETEGID first; if not available
- * then try HAS_SETREGID; as a last chance we try HAS_SETRESGID. May be OK
- * in the sense that we only want to set EGID; but are there any machines
- * with either of the latter, but not the former? Same with UID, later.
- */
-# ifdef HAS_SETEGID
- (void)setegid(PL_statbuf.st_gid);
-# else
-# ifdef HAS_SETREGID
- (void)setregid((Gid_t)-1,PL_statbuf.st_gid);
-# else
-# ifdef HAS_SETRESGID
- (void)setresgid((Gid_t)-1,PL_statbuf.st_gid,(Gid_t)-1);
-# else
- PerlProc_setgid(PL_statbuf.st_gid);
-# endif
-# endif
-# endif
- if (PerlProc_getegid() != PL_statbuf.st_gid)
- Perl_croak(aTHX_ "Can't do setegid!\n");
- }
- if (PL_statbuf.st_mode & S_ISUID) {
- if (PL_statbuf.st_uid != PL_euid)
-# ifdef HAS_SETEUID
- (void)seteuid(PL_statbuf.st_uid); /* all that for this */
-# else
-# ifdef HAS_SETREUID
- (void)setreuid((Uid_t)-1,PL_statbuf.st_uid);
-# else
-# ifdef HAS_SETRESUID
- (void)setresuid((Uid_t)-1,PL_statbuf.st_uid,(Uid_t)-1);
-# else
- PerlProc_setuid(PL_statbuf.st_uid);
-# endif
-# endif
-# endif
- if (PerlProc_geteuid() != PL_statbuf.st_uid)
- Perl_croak(aTHX_ "Can't do seteuid!\n");
- }
- else if (PL_uid) { /* oops, mustn't run as root */
-# ifdef HAS_SETEUID
- (void)seteuid((Uid_t)PL_uid);
-# else
-# ifdef HAS_SETREUID
- (void)setreuid((Uid_t)-1,(Uid_t)PL_uid);
-# else
-# ifdef HAS_SETRESUID
- (void)setresuid((Uid_t)-1,(Uid_t)PL_uid,(Uid_t)-1);
-# else
- PerlProc_setuid((Uid_t)PL_uid);
-# endif
-# endif
-# endif
- if (PerlProc_geteuid() != PL_uid)
- Perl_croak(aTHX_ "Can't do seteuid!\n");
- }
- init_ids();
- if (!cando(S_IXUSR,TRUE,&PL_statbuf))
- Perl_croak(aTHX_ "Effective UID cannot exec script\n"); /* they can't do this */
- }
-# ifdef IAMSUID
- else if (PL_preprocess) /* PSz 13 Nov 03 Caught elsewhere, useless(?!) here */
- Perl_croak(aTHX_ "-P not allowed for setuid/setgid script\n");
- else if (fdscript < 0 || suidscript != 1)
- /* PSz 13 Nov 03 Caught elsewhere, useless(?!) here */
- Perl_croak(aTHX_ "(suid) fdscript needed in suidperl\n");
- else {
-/* PSz 16 Sep 03 Keep neat error message */
- Perl_croak(aTHX_ "Script is not setuid/setgid in suidperl\n");
- }
-
- /* We absolutely must clear out any saved ids here, so we */
- /* exec the real perl, substituting fd script for scriptname. */
- /* (We pass script name as "subdir" of fd, which perl will grok.) */
- /*
- * It might be thought that using setresgid and/or setresuid (changed to
- * set the saved IDs) above might obviate the need to exec, and we could
- * go on to "do the perl thing".
- *
- * Is there such a thing as "saved GID", and is that set for setuid (but
- * not setgid) execution like suidperl? Without exec, it would not be
- * cleared for setuid (but not setgid) scripts (or might need a dummy
- * setresgid).
- *
- * We need suidperl to do the exact same argument checking that perl
- * does. Thus it cannot be very small; while it could be significantly
- * smaller, it is safer (simpler?) to make it essentially the same
- * binary as perl (but they are not identical). - Maybe could defer that
- * check to the invoked perl, and suidperl be a tiny wrapper instead;
- * but prefer to do thorough checks in suidperl itself. Such deferral
- * would make suidperl security rely on perl, a design no-no.
- *
- * Setuid things should be short and simple, thus easy to understand and
- * verify. They should do their "own thing", without influence by
- * attackers. It may help if their internal execution flow is fixed,
- * regardless of platform: it may be best to exec anyway.
- *
- * Suidperl should at least be conceptually simple: a wrapper only,
- * never to do any real perl. Maybe we should put
- * #ifdef IAMSUID
- * Perl_croak(aTHX_ "Suidperl should never do real perl\n");
- * #endif
- * into the perly bits.
- */
- PerlIO_rewind(rsfp);
- PerlLIO_lseek(PerlIO_fileno(rsfp),(Off_t)0,0); /* just in case rewind didn't */
- /* PSz 11 Nov 03
- * Keep original arguments: suidperl already has fd script.
- */
-/* for (which = 1; PL_origargv[which] && PL_origargv[which] != scriptname; which++) ; */
-/* if (!PL_origargv[which]) { */
-/* errno = EPERM; */
-/* Perl_croak(aTHX_ "Permission denied\n"); */
-/* } */
-/* PL_origargv[which] = savepv(Perl_form(aTHX_ "/dev/fd/%d/%s", */
-/* PerlIO_fileno(rsfp), PL_origargv[which])); */
-# if defined(HAS_FCNTL) && defined(F_SETFD)
- fcntl(PerlIO_fileno(rsfp),F_SETFD,0); /* ensure no close-on-exec */
-# endif
- PERL_FPU_PRE_EXEC
- PerlProc_execv(Perl_form(aTHX_ "%s/perl"PERL_FS_VER_FMT, BIN_EXP,
- (int)PERL_REVISION, (int)PERL_VERSION,
- (int)PERL_SUBVERSION), PL_origargv);/* try again */
- PERL_FPU_POST_EXEC
- Perl_croak(aTHX_ "Can't do setuid (suidperl cannot exec perl)\n");
-# endif /* IAMSUID */
-#else /* !DOSUID */
- PERL_UNUSED_ARG(fdscript);
- PERL_UNUSED_ARG(suidscript);
if (PL_euid != PL_uid || PL_egid != PL_gid) { /* (suidperl doesn't exist, in fact) */
-# ifdef SETUID_SCRIPTS_ARE_SECURE_NOW
- PERL_UNUSED_ARG(rsfp);
-# else
+ dVAR;
+
PerlLIO_fstat(PerlIO_fileno(rsfp),&PL_statbuf); /* may be either wrapped or real suid */
if ((PL_euid != PL_uid && PL_euid == PL_statbuf.st_uid && PL_statbuf.st_mode & S_ISUID)
||
if (!PL_do_undump)
Perl_croak(aTHX_ "YOU HAVEN'T DISABLED SET-ID SCRIPTS IN THE KERNEL YET!\n\
FIX YOUR KERNEL, PUT A C WRAPPER AROUND THIS SCRIPT, OR USE -u AND UNDUMP!\n");
-# endif /* SETUID_SCRIPTS_ARE_SECURE_NOW */
/* not set-id, must be wrapped */
}
-#endif /* DOSUID */
- PERL_UNUSED_ARG(validarg);
- PERL_UNUSED_ARG(scriptname);
- PERL_UNUSED_ARG(linestr_sv);
}
+#endif /* SETUID_SCRIPTS_ARE_SECURE_NOW */
STATIC void
S_find_beginning(pTHX_ SV* linestr_sv, PerlIO *rsfp)
int maclines = 0;
#endif
+ PERL_ARGS_ASSERT_FIND_BEGINNING;
+
/* skip forward in input to the real script? */
#ifdef MACOS_TRADITIONAL
"program input from stdin", which is substituted in place of '\0', which
could never be a command line flag. */
STATIC void
-S_forbid_setid(pTHX_ const char flag, const int suidscript)
+S_forbid_setid(pTHX_ const char flag, const bool suidscript) /* g */
{
dVAR;
char string[3] = "-x";
if (PL_egid != PL_gid)
Perl_croak(aTHX_ "No %s allowed while running setgid", message);
#endif /* SETUID_SCRIPTS_ARE_SECURE_NOW */
- /* PSz 29 Feb 04
- * Checks for UID/GID above "wrong": why disallow
- * perl -e 'print "Hello\n"'
- * from within setuid things?? Simply drop them: replaced by
- * fdscript/suidscript and #ifdef IAMSUID checks below.
- *
- * This may be too late for command-line switches. Will catch those on
- * the #! line, after finding the script name and setting up
- * fdscript/suidscript. Note that suidperl does not get around to
- * parsing (and checking) the switches on the #! line, but checks that
- * the two sets are identical.
- *
- * With SETUID_SCRIPTS_ARE_SECURE_NOW, could we use fdscript, also or
- * instead, or would that be "too late"? (We never have suidscript, can
- * we be sure to have fdscript?)
- *
- * Catch things with suidscript (in descendant of suidperl), even with
- * right UID/GID. Was already checked in suidperl, with #ifdef IAMSUID,
- * below; but I am paranoid.
- *
- * Also see comments about root running a setuid script, elsewhere.
- */
- if (suidscript >= 0)
+ if (suidscript)
Perl_croak(aTHX_ "No %s allowed with (suid) fdscript", message);
-#ifdef IAMSUID
- /* PSz 11 Nov 03 Catch it in suidperl, always! */
- Perl_croak(aTHX_ "No %s allowed in suidperl", message);
-#endif /* IAMSUID */
}
void
GV *tmpgv;
IO *io;
- sv_setpvn(get_sv("\"", TRUE), " ", 1);
+ sv_setpvs(get_sv("\"", GV_ADD), " ");
+ PL_ofsgv = (GV*)SvREFCNT_inc(gv_fetchpvs(",", GV_ADD|GV_NOTQUAL, SVt_PV));
+
PL_stdingv = gv_fetchpvs("STDIN", GV_ADD|GV_NOTQUAL, SVt_PVIO);
GvMULTI_on(PL_stdingv);
io = GvIOp(PL_stdingv);
IoIFP(io) = PerlIO_stdin();
tmpgv = gv_fetchpvs("stdin", GV_ADD|GV_NOTQUAL, SVt_PV);
GvMULTI_on(tmpgv);
- GvIOp(tmpgv) = (IO*)SvREFCNT_inc_simple(io);
+ GvIOp(tmpgv) = MUTABLE_IO(SvREFCNT_inc_simple(io));
tmpgv = gv_fetchpvs("STDOUT", GV_ADD|GV_NOTQUAL, SVt_PVIO);
GvMULTI_on(tmpgv);
setdefout(tmpgv);
tmpgv = gv_fetchpvs("stdout", GV_ADD|GV_NOTQUAL, SVt_PV);
GvMULTI_on(tmpgv);
- GvIOp(tmpgv) = (IO*)SvREFCNT_inc_simple(io);
+ GvIOp(tmpgv) = MUTABLE_IO(SvREFCNT_inc_simple(io));
PL_stderrgv = gv_fetchpvs("STDERR", GV_ADD|GV_NOTQUAL, SVt_PVIO);
GvMULTI_on(PL_stderrgv);
IoOFP(io) = IoIFP(io) = PerlIO_stderr();
tmpgv = gv_fetchpvs("stderr", GV_ADD|GV_NOTQUAL, SVt_PV);
GvMULTI_on(tmpgv);
- GvIOp(tmpgv) = (IO*)SvREFCNT_inc_simple(io);
+ GvIOp(tmpgv) = MUTABLE_IO(SvREFCNT_inc_simple(io));
PL_statname = newSV(0); /* last filename we did stat on */
Perl_init_argv_symbols(pTHX_ register int argc, register char **argv)
{
dVAR;
+
+ PERL_ARGS_ASSERT_INIT_ARGV_SYMBOLS;
+
argc--,argv++; /* skip name of script */
if (PL_doswitches) {
for (; argc > 0 && **argv == '-'; argc--,argv++) {
dVAR;
GV* tmpgv;
+ PERL_ARGS_ASSERT_INIT_POSTDUMP_SYMBOLS;
+
PL_toptarget = newSV_type(SVt_PVFM);
- sv_setpvn(PL_toptarget, "", 0);
+ sv_setpvs(PL_toptarget, "");
PL_bodytarget = newSV_type(SVt_PVFM);
- sv_setpvn(PL_bodytarget, "", 0);
+ sv_setpvs(PL_bodytarget, "");
PL_formtarget = PL_bodytarget;
TAINT;
sv_setpv(GvSV(tmpgv),MacPerl_MPWFileName(PL_origfilename));
#else
sv_setpv(GvSV(tmpgv),PL_origfilename);
- magicname("0", "0", 1);
+ {
+ GV * const gv = gv_fetchpv("0", GV_ADD, SVt_PV);
+ if (gv)
+ sv_magic(GvSV(gv), MUTABLE_SV(gv), PERL_MAGIC_sv, "0", 1);
+ }
#endif
}
if ((PL_envgv = gv_fetchpvs("ENV", GV_ADD|GV_NOTQUAL, SVt_PVHV))) {
environ[0] = NULL;
}
if (env) {
- char *s;
+ char *s, *old_var;
SV *sv;
for (; *env; env++) {
- if (!(s = strchr(*env,'=')) || s == *env)
+ old_var = *env;
+
+ if (!(s = strchr(old_var,'=')) || s == old_var)
continue;
+
#if defined(MSDOS) && !defined(DJGPP)
*s = '\0';
- (void)strupr(*env);
+ (void)strupr(old_var);
*s = '=';
#endif
sv = newSVpv(s+1, 0);
- (void)hv_store(hv, *env, s - *env, sv, 0);
+ (void)hv_store(hv, old_var, s - old_var, sv, 0);
if (env_is_not_environ)
mg_set(sv);
}
/* touch @F array to prevent spurious warnings 20020415 MJD */
if (PL_minus_a) {
- (void) get_av("main::F", TRUE | GV_ADDMULTI);
+ (void) get_av("main::F", GV_ADD | GV_ADDMULTI);
}
}
#else
if (s)
#endif
- incpush(s, TRUE, TRUE, TRUE, FALSE);
+ incpush(s,
+ INCPUSH_ADD_SUB_DIRS|INCPUSH_ADD_OLD_VERS|INCPUSH_USE_SEP);
else
- incpush(PerlEnv_getenv("PERLLIB"), FALSE, FALSE, TRUE, FALSE);
+ incpush(PerlEnv_getenv("PERLLIB"), INCPUSH_USE_SEP);
#else /* VMS */
/* Treat PERL5?LIB as a possible search list logical name -- the
* "natural" VMS idiom for a Unix path string. We allow each
char buf[256];
int idx = 0;
if (my_trnlnm("PERL5LIB",buf,0))
- do { incpush(buf,TRUE,TRUE,TRUE,FALSE); } while (my_trnlnm("PERL5LIB",buf,++idx));
+ do {
+ incpush(buf, INCPUSH_ADD_SUB_DIRS|INCPUSH_ADD_OLD_VERS
+ |INCPUSH_USE_SEP);
+ } while (my_trnlnm("PERL5LIB",buf,++idx));
else
- while (my_trnlnm("PERLLIB",buf,idx++)) incpush(buf,FALSE,FALSE,TRUE,FALSE);
+ while (my_trnlnm("PERLLIB",buf,idx++))
+ incpush(buf, INCPUSH_USE_SEP);
#endif /* VMS */
}
ARCHLIB PRIVLIB SITEARCH SITELIB VENDORARCH and VENDORLIB
*/
#ifdef APPLLIB_EXP
- incpush(APPLLIB_EXP, TRUE, TRUE, TRUE, TRUE);
+ incpush(APPLLIB_EXP,
+ INCPUSH_ADD_SUB_DIRS|INCPUSH_ADD_OLD_VERS|INCPUSH_USE_SEP
+ |INCPUSH_CAN_RELOCATE);
#endif
#ifdef ARCHLIB_EXP
- incpush(ARCHLIB_EXP, FALSE, FALSE, TRUE, TRUE);
+ incpush(ARCHLIB_EXP, INCPUSH_USE_SEP|INCPUSH_CAN_RELOCATE);
#endif
#ifdef MACOS_TRADITIONAL
{
Perl_sv_setpvf(aTHX_ privdir, "%slib:", macperl);
if (PerlLIO_stat(SvPVX(privdir), &tmpstatbuf) >= 0 && S_ISDIR(tmpstatbuf.st_mode))
- incpush(SvPVX(privdir), TRUE, FALSE, TRUE, FALSE);
+ incpush(SvPVX(privdir), INCPUSH_ADD_SUB_DIRS|INCPUSH_USE_SEP);
Perl_sv_setpvf(aTHX_ privdir, "%ssite_perl:", macperl);
if (PerlLIO_stat(SvPVX(privdir), &tmpstatbuf) >= 0 && S_ISDIR(tmpstatbuf.st_mode))
- incpush(SvPVX(privdir), TRUE, FALSE, TRUE, FALSE);
+ incpush(SvPVX(privdir), INCPUSH_ADD_SUB_DIRS|INCPUSH_USE_SEP);
SvREFCNT_dec(privdir);
}
if (!PL_tainting)
- incpush(":", FALSE, FALSE, TRUE, FALSE);
+ incpush(":", 0);
#else
#ifndef PRIVLIB_EXP
# define PRIVLIB_EXP "/usr/local/lib/perl5:/usr/local/lib/perl"
#endif
#if defined(WIN32)
- incpush(PRIVLIB_EXP, TRUE, FALSE, TRUE, TRUE);
+ incpush(PRIVLIB_EXP,
+ INCPUSH_ADD_SUB_DIRS|INCPUSH_USE_SEP|INCPUSH_CAN_RELOCATE);
#else
- incpush(PRIVLIB_EXP, FALSE, FALSE, TRUE, TRUE);
+ incpush(PRIVLIB_EXP, INCPUSH_USE_SEP|INCPUSH_CAN_RELOCATE);
#endif
#ifdef SITEARCH_EXP
/* sitearch is always relative to sitelib on Windows for
* DLL-based path intuition to work correctly */
# if !defined(WIN32)
- incpush(SITEARCH_EXP, FALSE, FALSE, TRUE, TRUE);
+ incpush(SITEARCH_EXP, INCPUSH_USE_SEP|INCPUSH_CAN_RELOCATE);
# endif
#endif
#ifdef SITELIB_EXP
# if defined(WIN32)
/* this picks up sitearch as well */
- incpush(SITELIB_EXP, TRUE, FALSE, TRUE, TRUE);
+ incpush(SITELIB_EXP,
+ INCPUSH_ADD_SUB_DIRS|INCPUSH_USE_SEP|INCPUSH_CAN_RELOCATE);
# else
- incpush(SITELIB_EXP, FALSE, FALSE, TRUE, TRUE);
+ incpush(SITELIB_EXP, INCPUSH_USE_SEP|INCPUSH_CAN_RELOCATE);
# endif
#endif
#if defined(SITELIB_STEM) && defined(PERL_INC_VERSION_LIST)
/* Search for version-specific dirs below here */
- incpush(SITELIB_STEM, FALSE, TRUE, TRUE, TRUE);
+ incpush(SITELIB_STEM,
+ INCPUSH_ADD_OLD_VERS|INCPUSH_USE_SEP|INCPUSH_CAN_RELOCATE);
#endif
#ifdef PERL_VENDORARCH_EXP
/* vendorarch is always relative to vendorlib on Windows for
* DLL-based path intuition to work correctly */
# if !defined(WIN32)
- incpush(PERL_VENDORARCH_EXP, FALSE, FALSE, TRUE, TRUE);
+ incpush(PERL_VENDORARCH_EXP, INCPUSH_USE_SEP|INCPUSH_CAN_RELOCATE);
# endif
#endif
#ifdef PERL_VENDORLIB_EXP
# if defined(WIN32)
- incpush(PERL_VENDORLIB_EXP, TRUE, FALSE, TRUE, TRUE); /* this picks up vendorarch as well */
+ /* this picks up vendorarch as well */
+ incpush(PERL_VENDORLIB_EXP,
+ INCPUSH_ADD_SUB_DIRS|INCPUSH_USE_SEP|INCPUSH_CAN_RELOCATE);
# else
- incpush(PERL_VENDORLIB_EXP, FALSE, FALSE, TRUE, TRUE);
+ incpush(PERL_VENDORLIB_EXP, INCPUSH_USE_SEP|INCPUSH_CAN_RELOCATE);
# endif
#endif
-#ifdef PERL_VENDORLIB_STEM /* Search for version-specific dirs below here */
- incpush(PERL_VENDORLIB_STEM, FALSE, TRUE, TRUE, TRUE);
+#if defined(PERL_VENDORLIB_STEM) && defined(PERL_INC_VERSION_LIST)
+ /* Search for version-specific dirs below here */
+ incpush(PERL_VENDORLIB_STEM,
+ INCPUSH_ADD_OLD_VERS|INCPUSH_USE_SEP|INCPUSH_CAN_RELOCATE);
#endif
#ifdef PERL_OTHERLIBDIRS
- incpush(PERL_OTHERLIBDIRS, TRUE, TRUE, TRUE, TRUE);
+ incpush(PERL_OTHERLIBDIRS, INCPUSH_ADD_SUB_DIRS|INCPUSH_ADD_OLD_VERS
+ |INCPUSH_USE_SEP|INCPUSH_CAN_RELOCATE);
#endif
if (!PL_tainting)
- incpush(".", FALSE, FALSE, TRUE, FALSE);
+ incpush(".", 0);
#endif /* MACOS_TRADITIONAL */
}
Generate a new SV if we do this, to save needing to copy the SV we push
onto @INC */
STATIC SV *
-S_incpush_if_exists(pTHX_ SV *dir)
+S_incpush_if_exists(pTHX_ AV *const av, SV *dir)
{
dVAR;
Stat_t tmpstatbuf;
+
+ PERL_ARGS_ASSERT_INCPUSH_IF_EXISTS;
+
if (PerlLIO_stat(SvPVX_const(dir), &tmpstatbuf) >= 0 &&
S_ISDIR(tmpstatbuf.st_mode)) {
- av_push(GvAVn(PL_incgv), dir);
+ av_push(av, dir);
dir = newSV(0);
}
return dir;
}
STATIC void
-S_incpush(pTHX_ const char *dir, bool addsubdirs, bool addoldvers, bool usesep,
- bool canrelocate)
+S_incpush(pTHX_ const char *dir, U32 flags)
{
dVAR;
+ const U8 addsubdirs = flags & INCPUSH_ADD_SUB_DIRS;
+ const U8 addoldvers = flags & INCPUSH_ADD_OLD_VERS;
+ const U8 usesep = flags & INCPUSH_USE_SEP;
+ const U8 canrelocate = flags & INCPUSH_CAN_RELOCATE;
+ const U8 unshift = flags & INCPUSH_UNSHIFT;
SV *subdir = NULL;
const char *p = dir;
+ AV *inc;
if (!p || !*p)
return;
+ inc = GvAVn(PL_incgv);
+
if (addsubdirs || addoldvers) {
subdir = newSV(0);
}
while (p && *p) {
SV *libdir = newSV(0);
const char *s;
+ /* Change 20189146be79a0596543441fa369c6bf7f85103f, to fix RT#6665,
+ arranged to unshift #! line -I onto the front of @INC. However,
+ -I can add version and architecture specific libraries, and they
+ need to go first. The old code assumed that it was always
+ pushing. Hence to make it work, need to push the architecture
+ (etc) libraries onto a temporary array, then "unshift" that onto
+ the front of @INC. */
+ AV *const av
+ = (addsubdirs || addoldvers) ? (unshift ? newAV() : inc) : NULL;
/* skip any consecutive separators */
if (usesep) {
SvPOK() won't be true. */
assert(caret_X);
assert(SvPOKp(caret_X));
- prefix_sv = newSVpvn(SvPVX(caret_X), SvCUR(caret_X));
+ prefix_sv = newSVpvn_flags(SvPVX(caret_X), SvCUR(caret_X),
+ SvUTF8(caret_X));
/* Firstly take off the leading .../
If all else fail we'll do the paths relative to the current
directory. */
SVfARG(libdir),
(int)PERL_REVISION, (int)PERL_VERSION,
(int)PERL_SUBVERSION, ARCHNAME);
- subdir = S_incpush_if_exists(aTHX_ subdir);
+ subdir = S_incpush_if_exists(aTHX_ av, subdir);
/* .../version if -d .../version */
Perl_sv_setpvf(aTHX_ subdir, "%"SVf PERL_ARCH_FMT_PATH,
SVfARG(libdir),
(int)PERL_REVISION, (int)PERL_VERSION,
(int)PERL_SUBVERSION);
- subdir = S_incpush_if_exists(aTHX_ subdir);
+ subdir = S_incpush_if_exists(aTHX_ av, subdir);
/* .../archname if -d .../archname */
Perl_sv_setpvf(aTHX_ subdir, "%"SVf PERL_ARCH_FMT,
SVfARG(libdir), ARCHNAME);
- subdir = S_incpush_if_exists(aTHX_ subdir);
+ subdir = S_incpush_if_exists(aTHX_ av, subdir);
}
/* .../xxx if -d .../xxx */
Perl_sv_setpvf(aTHX_ subdir, "%"SVf PERL_ARCH_FMT,
SVfARG(libdir), *incver);
- subdir = S_incpush_if_exists(aTHX_ subdir);
+ subdir = S_incpush_if_exists(aTHX_ av, subdir);
}
}
#endif
}
- /* finally push this lib directory on the end of @INC */
- av_push(GvAVn(PL_incgv), libdir);
+ /* finally add this lib directory at the end of @INC */
+ if (unshift) {
+ U32 extra = av_len(av) + 1;
+ av_unshift(inc, extra + 1);
+ av_store(inc, extra, libdir);
+ while (extra--) {
+ /* av owns a reference, av_store() expects to be donated a
+ reference, and av expects to be sane when it's cleared.
+ If I wanted to be naughty and wrong, I could peek inside the
+ implementation of av_clear(), realise that it uses
+ SvREFCNT_dec() too, so av's array could be a run of NULLs,
+ and so directly steal from it (with a memcpy() to inc, and
+ then memset() to NULL them out. But people copy code from the
+ core expecting it to be best practise, so let's use the API.
+ Although studious readers will note that I'm not checking any
+ return codes. */
+ av_store(inc, extra, SvREFCNT_inc(*av_fetch(av, extra, FALSE)));
+ }
+ SvREFCNT_dec(av);
+ }
+ else {
+ av_push(inc, libdir);
+ }
}
if (subdir) {
assert (SvREFCNT(subdir) == 1);
int ret;
dJMPENV;
+ PERL_ARGS_ASSERT_CALL_LIST;
+
while (av_len(paramList) >= 0) {
- cv = (CV*)av_shift(paramList);
+ cv = MUTABLE_CV(av_shift(paramList));
if (PL_savebegin) {
if (paramList == PL_beginav) {
/* save PL_beginav for compiler */
- Perl_av_create_and_push(aTHX_ &PL_beginav_save, (SV*)cv);
+ Perl_av_create_and_push(aTHX_ &PL_beginav_save, MUTABLE_SV(cv));
}
else if (paramList == PL_checkav) {
/* save PL_checkav for compiler */
- Perl_av_create_and_push(aTHX_ &PL_checkav_save, (SV*)cv);
+ Perl_av_create_and_push(aTHX_ &PL_checkav_save, MUTABLE_SV(cv));
}
else if (paramList == PL_unitcheckav) {
/* save PL_unitcheckav for compiler */
- Perl_av_create_and_push(aTHX_ &PL_unitcheckav_save, (SV*)cv);
+ Perl_av_create_and_push(aTHX_ &PL_unitcheckav_save, MUTABLE_SV(cv));
}
} else {
if (!PL_madskills)
Perl_my_exit(pTHX_ U32 status)
{
dVAR;
- DEBUG_S(PerlIO_printf(Perl_debug_log, "my_exit: thread %p, status %lu\n",
- (void*)thr, (unsigned long) status));
switch (status) {
case 0:
STATUS_ALL_SUCCESS;
*/
if (MY_POSIX_EXIT) {
- /* In POSIX_EXIT mode follow Perl documentations and use 255 for
- * the exit code when there isn't an error.
- */
+ /* According to the die_exit.t tests, if errno is non-zero */
+ /* It should be used for the error status. */
- if (STATUS_UNIX == 0)
- STATUS_UNIX_EXIT_SET(255);
- else {
- STATUS_UNIX_EXIT_SET(STATUS_UNIX);
+ if (errno == EVMSERR) {
+ STATUS_NATIVE = vaxc$errno;
+ } else {
- /* The exit code could have been set by $? or vmsish which
- * means that it may not be fatal. So convert
- * success/warning codes to fatal.
- */
- if ((STATUS_NATIVE & (STS$K_SEVERE|STS$K_ERROR)) == 0)
+ /* According to die_exit.t tests, if the child_exit code is */
+ /* also zero, then we need to exit with a code of 255 */
+ if ((errno != 0) && (errno < 256))
+ STATUS_UNIX_EXIT_SET(errno);
+ else if (STATUS_UNIX < 255) {
STATUS_UNIX_EXIT_SET(255);
+ }
+
}
+
+ /* The exit code could have been set by $? or vmsish which
+ * means that it may not have fatal set. So convert
+ * success/warning codes to fatal with out changing
+ * the POSIX status code. The severity makes VMS native
+ * status handling work, while UNIX mode programs use the
+ * the POSIX exit codes.
+ */
+ if ((STATUS_NATIVE & (STS$K_SEVERE|STS$K_ERROR)) == 0) {
+ STATUS_NATIVE &= STS$M_COND_ID;
+ STATUS_NATIVE |= STS$K_ERROR | STS$M_INHIB_MSG;
+ }
}
else {
/* Traditionally Perl on VMS always expects a Fatal Error. */
https://perl5.git.perl.org / perl5.git / blobdiff