/* we don't want to include this stuff if we are inside of
an external regex engine based on the core one - like re 'debug'*/
+#include "utf8.h"
+
struct regnode {
U8 flags;
U8 type;
struct regexp;
struct reg_substr_datum {
- I32 min_offset;
- I32 max_offset;
+ SSize_t min_offset; /* min pos (in chars) that substr must appear */
+ SSize_t max_offset /* max pos (in chars) that substr must appear */;
SV *substr; /* non-utf8 variant */
SV *utf8_substr; /* utf8 variant */
- I32 end_shift;
+ SSize_t end_shift; /* how many fixed chars must end the string */
};
struct reg_substr_data {
+ U8 check_ix; /* index into data[] of check substr */
struct reg_substr_datum data[3]; /* Actual array */
};
-#ifdef PERL_OLD_COPY_ON_WRITE
+#ifdef PERL_ANY_COW
#define SV_SAVED_COPY SV *saved_copy; /* If non-NULL, SV which is COW from original */
#else
#define SV_SAVED_COPY
#endif
+/* offsets within a string of a particular /(.)/ capture */
+
typedef struct regexp_paren_pair {
- I32 start;
- I32 end;
+ SSize_t start;
+ SSize_t end;
+ /* 'start_tmp' records a new opening position before the matching end
+ * has been found, so that the old start and end values are still
+ * valid, e.g.
+ * "abc" =~ /(.(?{print "[$1]"}))+/
+ *outputs [][a][b]
+ * This field is not part of the API. */
+ SSize_t start_tmp;
} regexp_paren_pair;
+#if defined(PERL_IN_REGCOMP_C) || defined(PERL_IN_UTF8_C)
+#define _invlist_union(a, b, output) _invlist_union_maybe_complement_2nd(a, b, FALSE, output)
+#define _invlist_intersection(a, b, output) _invlist_intersection_maybe_complement_2nd(a, b, FALSE, output)
+
+/* Subtracting b from a leaves in a everything that was there that isn't in b,
+ * that is the intersection of a with b's complement */
+#define _invlist_subtract(a, b, output) _invlist_intersection_maybe_complement_2nd(a, b, TRUE, output)
+#endif
+
+/* record the position of a (?{...}) within a pattern */
+
+struct reg_code_block {
+ STRLEN start;
+ STRLEN end;
+ OP *block;
+ REGEXP *src_regex;
+};
+
+
/*
The regexp/REGEXP struct, see L<perlreapi> for further documentation
on the individual fields. The struct is ordered so that the most
/* Information about the match that the perl core uses to */ \
/* manage things */ \
U32 extflags; /* Flags used both externally and internally */ \
- I32 minlen; /* mininum possible length of string to match */\
- I32 minlenret; /* mininum possible length of $& */ \
- U32 gofs; /* chars left of pos that we search from */ \
+ SSize_t minlen; /* mininum possible number of chars in string to match */\
+ SSize_t minlenret; /* mininum possible number of chars in $& */ \
+ STRLEN gofs; /* chars left of pos that we search from */ \
/* substring data about strings that must appear in the */ \
/* final match, used for optimisations */ \
struct reg_substr_data *substrs; \
/* during matching */ \
U32 lastparen; /* last open paren matched */ \
U32 lastcloseparen; /* last close paren matched */ \
- regexp_paren_pair *swap; /* Unused: 5.10.1 and later */ \
/* Array of offsets for (@-) and (@+) */ \
regexp_paren_pair *offs; \
/* saved or original string so \digit works forever. */ \
char *subbeg; \
SV_SAVED_COPY /* If non-NULL, SV which is COW from original */\
- I32 sublen; /* Length of string pointed by subbeg */ \
+ SSize_t sublen; /* Length of string pointed by subbeg */ \
+ SSize_t suboffset; /* byte offset of subbeg from logical start of str */ \
+ SSize_t subcoffset; /* suboffset equiv, but in chars (for @-/@+) */ \
/* Information about the match that isn't often used */ \
+ SSize_t maxlen; /* mininum possible number of chars in string to match */\
/* offset from wrapped to the start of precomp */ \
PERL_BITFIELD32 pre_prefix:4; \
- /* number of eval groups in the pattern - for security checks */\
- PERL_BITFIELD32 seen_evals:28
+ /* original flags used to compile the pattern, may differ */ \
+ /* from extflags in various ways */ \
+ PERL_BITFIELD32 compflags:9; \
+ CV *qr_anoncv /* the anon sub wrapped round qr/(?{..})/ */
typedef struct regexp {
_XPV_HEAD;
typedef struct re_scream_pos_data_s
{
char **scream_olds; /* match pos */
- I32 *scream_pos; /* Internal iterator of scream. */
+ SSize_t *scream_pos; /* Internal iterator of scream. */
} re_scream_pos_data;
/* regexp_engine structure. This is the dispatch table for regexes.
typedef struct regexp_engine {
REGEXP* (*comp) (pTHX_ SV * const pattern, U32 flags);
I32 (*exec) (pTHX_ REGEXP * const rx, char* stringarg, char* strend,
- char* strbeg, I32 minend, SV* screamer,
+ char* strbeg, SSize_t minend, SV* sv,
void* data, U32 flags);
- char* (*intuit) (pTHX_ REGEXP * const rx, SV *sv, char *strpos,
- char *strend, const U32 flags,
+ char* (*intuit) (pTHX_
+ REGEXP * const rx,
+ SV *sv,
+ const char * const strbeg,
+ char *strpos,
+ char *strend,
+ const U32 flags,
re_scream_pos_data *data);
SV* (*checkstr) (pTHX_ REGEXP * const rx);
void (*free) (pTHX_ REGEXP * const rx);
#ifdef USE_ITHREADS
void* (*dupe) (pTHX_ REGEXP * const rx, CLONE_PARAMS *param);
#endif
+ REGEXP* (*op_comp) (pTHX_ SV ** const patternp, int pat_count,
+ OP *expr, const struct regexp_engine* eng,
+ REGEXP *old_re,
+ bool *is_bare_re, U32 orig_rx_flags, U32 pm_flags);
} regexp_engine;
/*
paren name. >= 1 is reserved for actual numbered captures, i.e. $1,
$2 etc.
*/
-#define RX_BUFF_IDX_PREMATCH -2 /* $` / ${^PREMATCH} */
-#define RX_BUFF_IDX_POSTMATCH -1 /* $' / ${^POSTMATCH} */
-#define RX_BUFF_IDX_FULLMATCH 0 /* $& / ${^MATCH} */
+#define RX_BUFF_IDX_CARET_PREMATCH -5 /* ${^PREMATCH} */
+#define RX_BUFF_IDX_CARET_POSTMATCH -4 /* ${^POSTMATCH} */
+#define RX_BUFF_IDX_CARET_FULLMATCH -3 /* ${^MATCH} */
+#define RX_BUFF_IDX_PREMATCH -2 /* $` */
+#define RX_BUFF_IDX_POSTMATCH -1 /* $' */
+#define RX_BUFF_IDX_FULLMATCH 0 /* $& */
/*
Flags that are passed to the named_buff and named_buff_iter
=for apidoc Am|REGEXP *|SvRX|SV *sv
-Convenience macro to get the REGEXP from a SV. This is approximately
+Convenience macro to get the REGEXP from a SV. This is approximately
equivalent to the following snippet:
if (SvMAGICAL(sv))
#include "op_reg_common.h"
-#define RXf_PMf_STD_PMMOD (RXf_PMf_MULTILINE|RXf_PMf_SINGLELINE|RXf_PMf_FOLD|RXf_PMf_EXTENDED)
+#define RXf_PMf_STD_PMMOD (RXf_PMf_MULTILINE|RXf_PMf_SINGLELINE|RXf_PMf_FOLD|RXf_PMf_EXTENDED|RXf_PMf_NOCAPTURE)
+
+#define CASE_STD_PMMOD_FLAGS_PARSE_SET(pmfl, x_count) \
+ case IGNORE_PAT_MOD: *(pmfl) |= RXf_PMf_FOLD; break; \
+ case MULTILINE_PAT_MOD: *(pmfl) |= RXf_PMf_MULTILINE; break; \
+ case SINGLE_PAT_MOD: *(pmfl) |= RXf_PMf_SINGLELINE; break; \
+ case XTENDED_PAT_MOD: *(pmfl) |= RXf_PMf_EXTENDED; (x_count)++; break;\
+ case NOCAPTURE_PAT_MOD: *(pmfl) |= RXf_PMf_NOCAPTURE; break;
-#define CASE_STD_PMMOD_FLAGS_PARSE_SET(pmfl) \
- case IGNORE_PAT_MOD: *(pmfl) |= RXf_PMf_FOLD; break; \
- case MULTILINE_PAT_MOD: *(pmfl) |= RXf_PMf_MULTILINE; break; \
- case SINGLE_PAT_MOD: *(pmfl) |= RXf_PMf_SINGLELINE; break; \
- case XTENDED_PAT_MOD: *(pmfl) |= RXf_PMf_EXTENDED; break
+#define STD_PMMOD_FLAGS_PARSE_X_WARN(x_count) \
+ if (UNLIKELY((x_count) > 1)) { \
+ Perl_ck_warner_d(aTHX_ packWARN2(WARN_DEPRECATED, WARN_REGEXP), \
+ "Having more than one /%c regexp modifier is deprecated", \
+ XTENDED_PAT_MOD); \
+ }
/* Note, includes charset ones, assumes 0 is the default for them */
#define STD_PMMOD_FLAGS_CLEAR(pmfl) \
- *(pmfl) &= ~(RXf_PMf_FOLD|RXf_PMf_MULTILINE|RXf_PMf_SINGLELINE|RXf_PMf_EXTENDED|RXf_PMf_CHARSET)
+ *(pmfl) &= ~(RXf_PMf_FOLD|RXf_PMf_MULTILINE|RXf_PMf_SINGLELINE|RXf_PMf_EXTENDED|RXf_PMf_CHARSET|RXf_PMf_NOCAPTURE)
/* chars and strings used as regex pattern modifiers
* Singular is a 'c'har, plural is a "string"
#define DEFAULT_PAT_MOD '^' /* Short for all the default modifiers */
#define EXEC_PAT_MOD 'e'
#define KEEPCOPY_PAT_MOD 'p'
+#define NOCAPTURE_PAT_MOD 'n'
#define ONCE_PAT_MOD 'o'
#define GLOBAL_PAT_MOD 'g'
#define CONTINUE_PAT_MOD 'c'
#define ONCE_PAT_MODS "o"
#define KEEPCOPY_PAT_MODS "p"
+#define NOCAPTURE_PAT_MODS "n"
#define EXEC_PAT_MODS "e"
#define LOOP_PAT_MODS "gc"
#define NONDESTRUCT_PAT_MODS "r"
/* This string is expected by regcomp.c to be ordered so that the first
* character is the flag in bit RXf_PMf_STD_PMMOD_SHIFT of extflags; the next
* character is bit +1, etc. */
-#define STD_PAT_MODS "msix"
+#define STD_PAT_MODS "msixxn"
#define CHARSET_PAT_MODS ASCII_RESTRICT_PAT_MODS DEPENDS_PAT_MODS LOCALE_PAT_MODS UNICODE_PAT_MODS
* extflags; the next character is in bit +1, etc. */
#define INT_PAT_MODS STD_PAT_MODS KEEPCOPY_PAT_MODS
-#define EXT_PAT_MODS ONCE_PAT_MODS KEEPCOPY_PAT_MODS
+#define EXT_PAT_MODS ONCE_PAT_MODS KEEPCOPY_PAT_MODS NOCAPTURE_PAT_MODS
#define QR_PAT_MODS STD_PAT_MODS EXT_PAT_MODS CHARSET_PAT_MODS
#define M_PAT_MODS QR_PAT_MODS LOOP_PAT_MODS
#define S_PAT_MODS M_PAT_MODS EXEC_PAT_MODS NONDESTRUCT_PAT_MODS
*
*/
-/* Leave some space, so future bit allocations can go either in the shared or
- * unshared area without affecting binary compatibility */
-#define RXf_BASE_SHIFT (_RXf_PMf_SHIFT_NEXT+1)
-
-/* embed.pl doesn't yet know how to handle static inline functions, so
- manually decorate them here with gcc-style attributes.
+/*
+ Set in Perl_pmruntime if op_flags & OPf_SPECIAL, i.e. split. Will
+ be used by regex engines to check whether they should set
+ RXf_SKIPWHITE
*/
-PERL_STATIC_INLINE const char *
-get_regex_charset_name(const U32 flags, STRLEN* const lenp)
- __attribute__warn_unused_result__;
-
-#define MAX_CHARSET_NAME_LENGTH 2
+#define RXf_SPLIT RXf_PMf_SPLIT
+
+/* Currently the regex flags occupy a single 32-bit word. Not all bits are
+ * currently used. The lower bits are shared with their corresponding PMf flag
+ * bits, up to but not including _RXf_PMf_SHIFT_NEXT. The unused bits
+ * immediately follow; finally the used RXf-only (unshared) bits, so that the
+ * highest bit in the word is used. This gathers all the unused bits as a pool
+ * in the middle, like so: 11111111111111110000001111111111
+ * where the '1's represent used bits, and the '0's unused. This design allows
+ * us to allocate off one end of the pool if we need to add a shared bit, and
+ * off the other end if we need a non-shared bit, without disturbing the other
+ * bits. This maximizes the likelihood of being able to change things without
+ * breaking binary compatibility.
+ *
+ * To add shared bits, do so in op_reg_common.h. This should change
+ * _RXf_PMf_SHIFT_NEXT so that things won't compile. Then come to regexp.h and
+ * op.h and adjust the constant adders in the definitions of RXf_BASE_SHIFT and
+ * Pmf_BASE_SHIFT down by the number of shared bits you added. That's it.
+ * Things should be binary compatible. But if either of these gets to having
+ * to subtract rather than add, leave at 0 and instead adjust all the entries
+ * that are in terms of it. But if the first one of those is already
+ * RXf_BASE_SHIFT+0, there are no bits left, and a redesign is in order.
+ *
+ * To remove unshared bits, just delete its entry. If you're where breaking
+ * binary compatibility is ok to do, you might want to adjust things to move
+ * the newly opened space so that it gets absorbed into the common pool.
+ *
+ * To add unshared bits, first use up any gaps in the middle. Otherwise,
+ * allocate off the low end until you get to RXf_BASE_SHIFT+0. If that isn't
+ * enough, move RXf_BASE_SHIFT down (if possible) and add the new bit at the
+ * other end instead; this preserves binary compatibility.
+ *
+ * For the regexp bits, PL_reg_extflags_name[] in regnodes.h has a comment
+ * giving which bits are used/unused */
-PERL_STATIC_INLINE const char *
-get_regex_charset_name(const U32 flags, STRLEN* const lenp)
-{
- /* Returns a string that corresponds to the name of the regex character set
- * given by 'flags', and *lenp is set the length of that string, which
- * cannot exceed MAX_CHARSET_NAME_LENGTH characters */
-
- *lenp = 1;
- switch (get_regex_charset(flags)) {
- case REGEX_DEPENDS_CHARSET: return DEPENDS_PAT_MODS;
- case REGEX_LOCALE_CHARSET: return LOCALE_PAT_MODS;
- case REGEX_UNICODE_CHARSET: return UNICODE_PAT_MODS;
- case REGEX_ASCII_RESTRICTED_CHARSET: return ASCII_RESTRICT_PAT_MODS;
- case REGEX_ASCII_MORE_RESTRICTED_CHARSET:
- *lenp = 2;
- return ASCII_MORE_RESTRICT_PAT_MODS;
- default:
- return "?"; /* Unknown */
- }
-}
-
-/* Anchor and GPOS related stuff */
-#define RXf_ANCH_BOL (1<<(RXf_BASE_SHIFT+0))
-#define RXf_ANCH_MBOL (1<<(RXf_BASE_SHIFT+1))
-#define RXf_ANCH_SBOL (1<<(RXf_BASE_SHIFT+2))
-#define RXf_ANCH_GPOS (1<<(RXf_BASE_SHIFT+3))
-#define RXf_GPOS_SEEN (1<<(RXf_BASE_SHIFT+4))
-#define RXf_GPOS_FLOAT (1<<(RXf_BASE_SHIFT+5))
-/* two bits here */
-#define RXf_ANCH (RXf_ANCH_BOL|RXf_ANCH_MBOL|RXf_ANCH_GPOS|RXf_ANCH_SBOL)
-#define RXf_GPOS_CHECK (RXf_GPOS_SEEN|RXf_ANCH_GPOS)
-#define RXf_ANCH_SINGLE (RXf_ANCH_SBOL|RXf_ANCH_GPOS)
+#define RXf_BASE_SHIFT (_RXf_PMf_SHIFT_NEXT + 2)
/* What we have seen */
-#define RXf_LOOKBEHIND_SEEN (1<<(RXf_BASE_SHIFT+6))
-#define RXf_EVAL_SEEN (1<<(RXf_BASE_SHIFT+7))
-#define RXf_CANY_SEEN (1<<(RXf_BASE_SHIFT+8))
+#define RXf_NO_INPLACE_SUBST (1U<<(RXf_BASE_SHIFT+2))
+#define RXf_EVAL_SEEN (1U<<(RXf_BASE_SHIFT+3))
/* Special */
-#define RXf_NOSCAN (1<<(RXf_BASE_SHIFT+9))
-#define RXf_CHECK_ALL (1<<(RXf_BASE_SHIFT+10))
+#define RXf_UNBOUNDED_QUANTIFIER_SEEN (1U<<(RXf_BASE_SHIFT+4))
+#define RXf_CHECK_ALL (1U<<(RXf_BASE_SHIFT+5))
/* UTF8 related */
-#define RXf_MATCH_UTF8 (1<<(RXf_BASE_SHIFT+11))
+#define RXf_MATCH_UTF8 (1U<<(RXf_BASE_SHIFT+6)) /* $1 etc are utf8 */
/* Intuit related */
-#define RXf_USE_INTUIT_NOML (1<<(RXf_BASE_SHIFT+12))
-#define RXf_USE_INTUIT_ML (1<<(RXf_BASE_SHIFT+13))
-#define RXf_INTUIT_TAIL (1<<(RXf_BASE_SHIFT+14))
-
-/*
- Set in Perl_pmruntime if op_flags & OPf_SPECIAL, i.e. split. Will
- be used by regex engines to check whether they should set
- RXf_SKIPWHITE
-*/
-#define RXf_SPLIT (1<<(RXf_BASE_SHIFT+15))
-
+#define RXf_USE_INTUIT_NOML (1U<<(RXf_BASE_SHIFT+7))
+#define RXf_USE_INTUIT_ML (1U<<(RXf_BASE_SHIFT+8))
+#define RXf_INTUIT_TAIL (1U<<(RXf_BASE_SHIFT+9))
#define RXf_USE_INTUIT (RXf_USE_INTUIT_NOML|RXf_USE_INTUIT_ML)
+/* Do we have some sort of anchor? */
+#define RXf_IS_ANCHORED (1U<<(RXf_BASE_SHIFT+10))
+
/* Copy and tainted info */
-#define RXf_COPY_DONE (1<<(RXf_BASE_SHIFT+16))
+#define RXf_COPY_DONE (1U<<(RXf_BASE_SHIFT+11))
-/* during execution: pattern temporarily tainted by executing locale ops;
- * post-execution: $1 et al are tainted */
-#define RXf_TAINTED_SEEN (1<<(RXf_BASE_SHIFT+17))
+/* post-execution: $1 et al are tainted */
+#define RXf_TAINTED_SEEN (1U<<(RXf_BASE_SHIFT+12))
/* this pattern was tainted during compilation */
-#define RXf_TAINTED (1<<(RXf_BASE_SHIFT+18))
+#define RXf_TAINTED (1U<<(RXf_BASE_SHIFT+13))
/* Flags indicating special patterns */
-#define RXf_START_ONLY (1<<(RXf_BASE_SHIFT+19)) /* Pattern is /^/ */
-#define RXf_SKIPWHITE (1<<(RXf_BASE_SHIFT+20)) /* Pattern is for a split / / */
-#define RXf_WHITE (1<<(RXf_BASE_SHIFT+21)) /* Pattern is /\s+/ */
-#define RXf_NULL (1<<(RXf_BASE_SHIFT+22)) /* Pattern is // */
-#if RXf_BASE_SHIFT+22 > 31
-# error Too many RXf_PMf bits used. See regnodes.h for any spare in middle
+#define RXf_START_ONLY (1U<<(RXf_BASE_SHIFT+14)) /* Pattern is /^/ */
+#define RXf_SKIPWHITE (1U<<(RXf_BASE_SHIFT+15)) /* Pattern is for a */
+ /* split " " */
+#define RXf_WHITE (1U<<(RXf_BASE_SHIFT+16)) /* Pattern is /\s+/ */
+#define RXf_NULL (1U<<(RXf_BASE_SHIFT+17)) /* Pattern is // */
+
+/* See comments at the beginning of these defines about adding bits. The
+ * highest bit position should be used, so that if RXf_BASE_SHIFT gets
+ * increased, the #error below will be triggered so that you will be reminded
+ * to adjust things at the other end to keep the bit positions unchanged */
+#if RXf_BASE_SHIFT+17 > 31
+# error Too many RXf_PMf bits used. See comments at beginning of these for what to do
#endif
/*
*
*/
+#ifdef NO_TAINT_SUPPORT
+# define RX_ISTAINTED(prog) 0
+# define RX_TAINT_on(prog) NOOP
+# define RXp_MATCH_TAINTED(prog) 0
+# define RX_MATCH_TAINTED(prog) 0
+# define RXp_MATCH_TAINTED_on(prog) NOOP
+# define RX_MATCH_TAINTED_on(prog) NOOP
+# define RX_MATCH_TAINTED_off(prog) NOOP
+#else
+# define RX_ISTAINTED(prog) (RX_EXTFLAGS(prog) & RXf_TAINTED)
+# define RX_TAINT_on(prog) (RX_EXTFLAGS(prog) |= RXf_TAINTED)
+# define RXp_MATCH_TAINTED(prog) (RXp_EXTFLAGS(prog) & RXf_TAINTED_SEEN)
+# define RX_MATCH_TAINTED(prog) (RX_EXTFLAGS(prog) & RXf_TAINTED_SEEN)
+# define RXp_MATCH_TAINTED_on(prog) (RXp_EXTFLAGS(prog) |= RXf_TAINTED_SEEN)
+# define RX_MATCH_TAINTED_on(prog) (RX_EXTFLAGS(prog) |= RXf_TAINTED_SEEN)
+# define RX_MATCH_TAINTED_off(prog) (RX_EXTFLAGS(prog) &= ~RXf_TAINTED_SEEN)
+#endif
+
#define RX_HAS_CUTGROUP(prog) ((prog)->intflags & PREGf_CUTGROUP_SEEN)
-#define RXp_MATCH_TAINTED(prog) (RXp_EXTFLAGS(prog) & RXf_TAINTED_SEEN)
-#define RX_MATCH_TAINTED(prog) (RX_EXTFLAGS(prog) & RXf_TAINTED_SEEN)
-#define RX_MATCH_TAINTED_on(prog) (RX_EXTFLAGS(prog) |= RXf_TAINTED_SEEN)
-#define RX_MATCH_TAINTED_off(prog) (RX_EXTFLAGS(prog) &= ~RXf_TAINTED_SEEN)
#define RX_MATCH_TAINTED_set(prog, t) ((t) \
? RX_MATCH_TAINTED_on(prog) \
: RX_MATCH_TAINTED_off(prog))
: RX_MATCH_COPIED_off(prog))
#define RXp_EXTFLAGS(rx) ((rx)->extflags)
+#define RXp_COMPFLAGS(rx) ((rx)->compflags)
/* For source compatibility. We used to store these explicitly. */
-#define RX_PRECOMP(prog) (RX_WRAPPED(prog) + ((struct regexp *)SvANY(prog))->pre_prefix)
-#define RX_PRECOMP_const(prog) (RX_WRAPPED_const(prog) + ((struct regexp *)SvANY(prog))->pre_prefix)
+#define RX_PRECOMP(prog) (RX_WRAPPED(prog) + ReANY(prog)->pre_prefix)
+#define RX_PRECOMP_const(prog) (RX_WRAPPED_const(prog) + ReANY(prog)->pre_prefix)
/* FIXME? Are we hardcoding too much here and constraining plugin extension
writers? Specifically, the value 1 assumes that the wrapped version always
has exactly one character at the end, a ')'. Will that always be true? */
-#define RX_PRELEN(prog) (RX_WRAPLEN(prog) - ((struct regexp *)SvANY(prog))->pre_prefix - 1)
-#define RX_WRAPPED(prog) SvPVX(prog)
-#define RX_WRAPPED_const(prog) SvPVX_const(prog)
+#define RX_PRELEN(prog) (RX_WRAPLEN(prog) - ReANY(prog)->pre_prefix - 1)
+#define RX_WRAPPED(prog) ReANY(prog)->xpv_len_u.xpvlenu_pv
+#define RX_WRAPPED_const(prog) ((const char *)RX_WRAPPED(prog))
#define RX_WRAPLEN(prog) SvCUR(prog)
-#define RX_CHECK_SUBSTR(prog) (((struct regexp *)SvANY(prog))->check_substr)
+#define RX_CHECK_SUBSTR(prog) (ReANY(prog)->check_substr)
#define RX_REFCNT(prog) SvREFCNT(prog)
-#if defined(__GNUC__) && !defined(PERL_GCC_BRACE_GROUPS_FORBIDDEN)
-# define RX_EXTFLAGS(prog) \
- (*({ \
- const REGEXP *const _rx_extflags = (prog); \
- assert(SvTYPE(_rx_extflags) == SVt_REGEXP); \
- &RXp_EXTFLAGS(SvANY(_rx_extflags)); \
- }))
-# define RX_ENGINE(prog) \
- (*({ \
- const REGEXP *const _rx_engine = (prog); \
- assert(SvTYPE(_rx_engine) == SVt_REGEXP); \
- &SvANY(_rx_engine)->engine; \
- }))
-# define RX_SUBBEG(prog) \
- (*({ \
- const REGEXP *const _rx_subbeg = (prog); \
- assert(SvTYPE(_rx_subbeg) == SVt_REGEXP); \
- &SvANY(_rx_subbeg)->subbeg; \
- }))
-# define RX_OFFS(prog) \
- (*({ \
- const REGEXP *const _rx_offs = (prog); \
- assert(SvTYPE(_rx_offs) == SVt_REGEXP); \
- &SvANY(_rx_offs)->offs; \
- }))
-# define RX_NPARENS(prog) \
- (*({ \
- const REGEXP *const _rx_nparens = (prog); \
- assert(SvTYPE(_rx_nparens) == SVt_REGEXP); \
- &SvANY(_rx_nparens)->nparens; \
- }))
-#else
-# define RX_EXTFLAGS(prog) RXp_EXTFLAGS((struct regexp *)SvANY(prog))
-# define RX_ENGINE(prog) (((struct regexp *)SvANY(prog))->engine)
-# define RX_SUBBEG(prog) (((struct regexp *)SvANY(prog))->subbeg)
-# define RX_OFFS(prog) (((struct regexp *)SvANY(prog))->offs)
-# define RX_NPARENS(prog) (((struct regexp *)SvANY(prog))->nparens)
-#endif
-#define RX_SUBLEN(prog) (((struct regexp *)SvANY(prog))->sublen)
-#define RX_MINLEN(prog) (((struct regexp *)SvANY(prog))->minlen)
-#define RX_MINLENRET(prog) (((struct regexp *)SvANY(prog))->minlenret)
-#define RX_GOFS(prog) (((struct regexp *)SvANY(prog))->gofs)
-#define RX_LASTPAREN(prog) (((struct regexp *)SvANY(prog))->lastparen)
-#define RX_LASTCLOSEPAREN(prog) (((struct regexp *)SvANY(prog))->lastcloseparen)
-#define RX_SEEN_EVALS(prog) (((struct regexp *)SvANY(prog))->seen_evals)
-#define RX_SAVED_COPY(prog) (((struct regexp *)SvANY(prog))->saved_copy)
+#define RX_EXTFLAGS(prog) RXp_EXTFLAGS(ReANY(prog))
+#define RX_COMPFLAGS(prog) RXp_COMPFLAGS(ReANY(prog))
+#define RX_ENGINE(prog) (ReANY(prog)->engine)
+#define RX_SUBBEG(prog) (ReANY(prog)->subbeg)
+#define RX_SUBOFFSET(prog) (ReANY(prog)->suboffset)
+#define RX_SUBCOFFSET(prog) (ReANY(prog)->subcoffset)
+#define RX_OFFS(prog) (ReANY(prog)->offs)
+#define RX_NPARENS(prog) (ReANY(prog)->nparens)
+#define RX_SUBLEN(prog) (ReANY(prog)->sublen)
+#define RX_MINLEN(prog) (ReANY(prog)->minlen)
+#define RX_MINLENRET(prog) (ReANY(prog)->minlenret)
+#define RX_GOFS(prog) (ReANY(prog)->gofs)
+#define RX_LASTPAREN(prog) (ReANY(prog)->lastparen)
+#define RX_LASTCLOSEPAREN(prog) (ReANY(prog)->lastcloseparen)
+#define RX_SAVED_COPY(prog) (ReANY(prog)->saved_copy)
+/* last match was zero-length */
+#define RX_ZERO_LEN(prog) \
+ (RX_OFFS(prog)[0].start + (SSize_t)RX_GOFS(prog) \
+ == RX_OFFS(prog)[0].end)
#endif /* PLUGGABLE_RE_EXTENSION */
/* Stuff that needs to be included in the pluggable extension goes below here */
-#ifdef PERL_OLD_COPY_ON_WRITE
+#ifdef PERL_ANY_COW
#define RX_MATCH_COPY_FREE(rx) \
STMT_START {if (RX_SAVED_COPY(rx)) { \
SV_CHECK_THINKFIRST_COW_DROP(RX_SAVED_COPY(rx)); \
#define RX_MATCH_UTF8_on(prog) (RX_EXTFLAGS(prog) |= RXf_MATCH_UTF8)
#define RX_MATCH_UTF8_off(prog) (RX_EXTFLAGS(prog) &= ~RXf_MATCH_UTF8)
#define RX_MATCH_UTF8_set(prog, t) ((t) \
- ? (RX_MATCH_UTF8_on(prog), (PL_reg_match_utf8 = 1)) \
- : (RX_MATCH_UTF8_off(prog), (PL_reg_match_utf8 = 0)))
+ ? RX_MATCH_UTF8_on(prog) \
+ : RX_MATCH_UTF8_off(prog))
/* Whether the pattern stored at RX_WRAPPED is in UTF-8 */
#define RX_UTF8(prog) SvUTF8(prog)
-#define REXEC_COPY_STR 0x01 /* Need to copy the string. */
-#define REXEC_CHECKED 0x02 /* check_substr already checked. */
-#define REXEC_SCREAM 0x04 /* use scream table. */
-#define REXEC_IGNOREPOS 0x08 /* \G matches at start. */
-#define REXEC_NOT_FIRST 0x10 /* This is another iteration of //g. */
+
+/* bits in flags arg of Perl_regexec_flags() */
+
+#define REXEC_COPY_STR 0x01 /* Need to copy the string for captures. */
+#define REXEC_CHECKED 0x02 /* re_intuit_start() already called. */
+#define REXEC_SCREAM 0x04 /* currently unused. */
+#define REXEC_IGNOREPOS 0x08 /* use stringarg, not pos(), for \G match */
+#define REXEC_NOT_FIRST 0x10 /* This is another iteration of //g:
+ no need to copy string again */
+
+ /* under REXEC_COPY_STR, it's ok for the
+ engine (modulo PL_sawamperand etc)
+ to skip copying: ... */
+#define REXEC_COPY_SKIP_PRE 0x20 /* ...the $` part of the string, or */
+#define REXEC_COPY_SKIP_POST 0x40 /* ...the $' part of the string */
+#define REXEC_FAIL_ON_UNDERFLOW 0x80 /* fail the match if $& would start before
+ the start pos (so s/.\G// would fail
+ on second iteration */
#if defined(__GNUC__) && !defined(PERL_GCC_BRACE_GROUPS_FORBIDDEN)
# define ReREFCNT_inc(re) \
# define ReREFCNT_dec(re) SvREFCNT_dec(re)
# define ReREFCNT_inc(re) ((REGEXP *) SvREFCNT_inc(re))
#endif
+#define ReANY(re) S_ReANY((const REGEXP *)(re))
/* FIXME for plugins. */
#define FBMrf_MULTILINE 1
+struct regmatch_state;
+struct regmatch_slab;
+
+/* like regmatch_info_aux, but contains extra fields only needed if the
+ * pattern contains (?{}). If used, is snuck into the second slot in the
+ * regmatch_state stack at the start of execution */
+
+typedef struct {
+ regexp *rex;
+ PMOP *curpm; /* saved PL_curpm */
+#ifdef PERL_ANY_COW
+ SV *saved_copy; /* saved saved_copy field from rex */
+#endif
+ char *subbeg; /* saved subbeg field from rex */
+ STRLEN sublen; /* saved sublen field from rex */
+ STRLEN suboffset; /* saved suboffset field from rex */
+ STRLEN subcoffset; /* saved subcoffset field from rex */
+ MAGIC *pos_magic; /* pos() magic attached to $_ */
+ SSize_t pos; /* the original value of pos() in pos_magic */
+ U8 pos_flags; /* flags to be restored; currently only MGf_BYTES*/
+} regmatch_info_aux_eval;
+
+
+/* fields that logically live in regmatch_info, but which need cleaning
+ * up on croak(), and so are instead are snuck into the first slot in
+ * the regmatch_state stack at the start of execution */
+
+typedef struct {
+ regmatch_info_aux_eval *info_aux_eval;
+ struct regmatch_state *old_regmatch_state; /* saved PL_regmatch_state */
+ struct regmatch_slab *old_regmatch_slab; /* saved PL_regmatch_slab */
+ char *poscache; /* S-L cache of fail positions of WHILEMs */
+} regmatch_info_aux;
+
+
/* some basic information about the current match that is created by
- * Perl_regexec_flags and then passed to regtry(), regmatch() etc */
+ * Perl_regexec_flags and then passed to regtry(), regmatch() etc.
+ * It is allocated as a local var on the stack, so nothing should be
+ * stored in it that needs preserving or clearing up on croak().
+ * For that, see the aux_info and aux_info_eval members of the
+ * regmatch_state union. */
typedef struct {
- REGEXP *prog;
- char *bol;
- char *till;
- SV *sv;
- char *ganch;
- char *cutpoint;
+ REGEXP *prog; /* the regex being executed */
+ const char * strbeg; /* real start of string */
+ char *strend; /* one byte beyond last char of match string */
+ char *till; /* matches shorter than this fail (see minlen arg) */
+ SV *sv; /* the SV string currently being matched */
+ char *ganch; /* position of \G anchor */
+ char *cutpoint; /* (*COMMIT) position (if any) */
+ regmatch_info_aux *info_aux; /* extra fields that need cleanup */
+ regmatch_info_aux_eval *info_aux_eval; /* extra saved state for (?{}) */
+ I32 poscache_maxiter; /* how many whilems todo before S-L cache kicks in */
+ I32 poscache_iter; /* current countdown from _maxiter to zero */
+ STRLEN poscache_size; /* size of regmatch_info_aux.poscache */
+ bool intuit; /* re_intuit_start() is the top-level caller */
+ bool is_utf8_pat; /* regex is utf8 */
+ bool is_utf8_target; /* string being matched is utf8 */
+ bool warned; /* we have issued a recursion warning; no need for more */
} regmatch_info;
union {
+ /* the 'info_aux' and 'info_aux_eval' union members are cuckoos in
+ * the nest. They aren't saved backtrack state; rather they
+ * represent one or two extra chunks of data that need allocating
+ * at the start of a match. These fields would logically live in
+ * the regmatch_info struct, except that is allocated on the
+ * C stack, and these fields are all things that require cleanup
+ * after a croak(), when the stack is lost.
+ * As a convenience, we just use the first 1 or 2 regmatch_state
+ * slots to store this info, as we will be allocating a slab of
+ * these anyway. Otherwise we'd have to malloc and then free them,
+ * or allocate them on the save stack (where they will get
+ * realloced if the save stack grows).
+ * info_aux contains the extra fields that are always needed;
+ * info_aux_eval contains extra fields that only needed if
+ * the pattern contains code blocks
+ * We split them into two separate structs to avoid increasing
+ * the size of the union.
+ */
+
+ regmatch_info_aux info_aux;
+
+ regmatch_info_aux_eval info_aux_eval;
+
/* this is a fake union member that matches the first element
* of each member that needs to store positive backtrack
* information */
/* this first element must match u.yes */
struct regmatch_state *prev_yes_state;
U32 lastparen;
+ U32 lastcloseparen;
CHECKPOINT cp;
} branchlike;
/* the first elements must match u.branchlike */
struct regmatch_state *prev_yes_state;
U32 lastparen;
+ U32 lastcloseparen;
CHECKPOINT cp;
regnode *next_branch; /* next branch node */
/* the first elements must match u.branchlike */
struct regmatch_state *prev_yes_state;
U32 lastparen;
+ U32 lastcloseparen;
CHECKPOINT cp;
U32 accepted; /* how many accepting states left */
+ bool longfold;/* saw a fold with a 1->n char mapping */
U16 *jump; /* positive offsets from me */
- regnode *B; /* node following the trie */
regnode *me; /* Which node am I - needed for jump tries*/
U8 *firstpos;/* pos in string of first trie match */
U32 firstchars;/* len in chars of firstpos from start */
U16 nextword;/* next word to try */
U16 topword; /* longest accepted word */
- bool longfold;/* saw a fold with a 1->n char mapping */
} trie;
/* special types - these members are used to store state for special
struct regmatch_state *prev_eval;
struct regmatch_state *prev_curlyx;
REGEXP *prev_rex;
- U32 toggle_reg_flags; /* what bits in PL_reg_flags to
- flip when transitioning between
- inner and outer rexen */
CHECKPOINT cp; /* remember current savestack indexes */
CHECKPOINT lastcp;
U32 close_paren; /* which close bracket is our end */
struct {
/* this first element must match u.yes */
struct regmatch_state *prev_yes_state;
- I32 c1, c2; /* case fold search */
+ int c1, c2; /* case fold search */
CHECKPOINT cp;
+ U32 lastparen;
+ U32 lastcloseparen;
I32 alen; /* length of first-matched A string */
I32 count;
bool minmod;
regnode *A, *B; /* the nodes corresponding to /A*B/ */
regnode *me; /* the curlym node */
+ U8 c1_utf8[UTF8_MAXBYTES+1]; /* */
+ U8 c2_utf8[UTF8_MAXBYTES+1];
} curlym;
struct {
U32 paren;
CHECKPOINT cp;
- I32 c1, c2; /* case fold search */
+ U32 lastparen;
+ U32 lastcloseparen;
+ int c1, c2; /* case fold search */
char *maxpos; /* highest possible point in string to match */
char *oldloc; /* the previous locinput */
int count;
int min, max; /* {m,n} */
regnode *A, *B; /* the nodes corresponding to /A*B/ */
+ U8 c1_utf8[UTF8_MAXBYTES+1]; /* */
+ U8 c2_utf8[UTF8_MAXBYTES+1];
} curly; /* and CURLYN/PLUS/STAR */
} u;
struct regmatch_slab *prev, *next;
} regmatch_slab;
-#define PL_reg_flags PL_reg_state.re_state_reg_flags
-#define PL_bostr PL_reg_state.re_state_bostr
-#define PL_reginput PL_reg_state.re_state_reginput
-#define PL_regeol PL_reg_state.re_state_regeol
-#define PL_regoffs PL_reg_state.re_state_regoffs
-#define PL_reglastparen PL_reg_state.re_state_reglastparen
-#define PL_reglastcloseparen PL_reg_state.re_state_reglastcloseparen
-#define PL_reg_start_tmp PL_reg_state.re_state_reg_start_tmp
-#define PL_reg_start_tmpl PL_reg_state.re_state_reg_start_tmpl
-#define PL_reg_eval_set PL_reg_state.re_state_reg_eval_set
-#define PL_reg_match_utf8 PL_reg_state.re_state_reg_match_utf8
-#define PL_reg_magic PL_reg_state.re_state_reg_magic
-#define PL_reg_oldpos PL_reg_state.re_state_reg_oldpos
-#define PL_reg_oldcurpm PL_reg_state.re_state_reg_oldcurpm
-#define PL_reg_curpm PL_reg_state.re_state_reg_curpm
-#define PL_reg_oldsaved PL_reg_state.re_state_reg_oldsaved
-#define PL_reg_oldsavedlen PL_reg_state.re_state_reg_oldsavedlen
-#define PL_reg_maxiter PL_reg_state.re_state_reg_maxiter
-#define PL_reg_leftiter PL_reg_state.re_state_reg_leftiter
-#define PL_reg_poscache PL_reg_state.re_state_reg_poscache
-#define PL_reg_poscache_size PL_reg_state.re_state_reg_poscache_size
-#define PL_regsize PL_reg_state.re_state_regsize
-#define PL_reg_starttry PL_reg_state.re_state_reg_starttry
-#define PL_nrs PL_reg_state.re_state_nrs
-
-struct re_save_state {
- U32 re_state_reg_flags; /* from regexec.c */
- U32 re_state_reg_start_tmpl; /* from regexec.c */
- I32 re_state_reg_eval_set; /* from regexec.c */
- bool re_state_reg_match_utf8; /* from regexec.c */
- char *re_state_bostr;
- char *re_state_reginput; /* String-input pointer. */
- char *re_state_regeol; /* End of input, for $ check. */
- regexp_paren_pair *re_state_regoffs; /* Pointer to start/end pairs */
- U32 *re_state_reglastparen; /* Similarly for lastparen. */
- U32 *re_state_reglastcloseparen; /* Similarly for lastcloseparen. */
- char **re_state_reg_start_tmp; /* from regexec.c */
- MAGIC *re_state_reg_magic; /* from regexec.c */
- PMOP *re_state_reg_oldcurpm; /* from regexec.c */
- PMOP *re_state_reg_curpm; /* from regexec.c */
- char *re_state_reg_oldsaved; /* old saved substr during match */
- STRLEN re_state_reg_oldsavedlen; /* old length of saved substr during match */
- STRLEN re_state_reg_poscache_size; /* size of pos cache of WHILEM */
- I32 re_state_reg_oldpos; /* from regexec.c */
- I32 re_state_reg_maxiter; /* max wait until caching pos */
- I32 re_state_reg_leftiter; /* wait until caching pos */
- U32 re_state_regsize; /* from regexec.c */
- char *re_state_reg_poscache; /* cache of pos of WHILEM */
- char *re_state_reg_starttry; /* from regexec.c */
-#ifdef PERL_OLD_COPY_ON_WRITE
- SV *re_state_nrs; /* was placeholder: unused since 5.8.0 (5.7.2 patch #12027 for bug ID 20010815.012). Used to save rx->saved_copy */
-#endif
-};
-#define SAVESTACK_ALLOC_FOR_RE_SAVE_STATE \
- (1 + ((sizeof(struct re_save_state) - 1) / sizeof(*PL_savestack)))
/*
* Local variables:
* c-indentation-style: bsd
* c-basic-offset: 4
- * indent-tabs-mode: t
+ * indent-tabs-mode: nil
* End:
*
- * ex: set ts=8 sts=4 sw=4 noet:
+ * ex: set ts=8 sts=4 sw=4 et:
*/