This is a live mirror of the Perl 5 development currently hosted at https://github.com/perl/perl5
Use $^O
[perl5.git] / Makefile.SH
index b3e5e04..41e30e3 100644 (file)
@@ -41,24 +41,19 @@ case "$d_shrplib" in
     pldlflags="";;
 esac
 
-: Configure sets byacc=byacc if byacc is not found.  We reset it to ''
-case "$byacc" in
-'byacc') byacc='';;
-esac
-
 : Prepare dependency lists for Makefile.
 dynamic_list=' '
 for f in $dynamic_ext; do
     : the dependency named here will never exist
       base=`echo "$f" | sed 's/.*\///'`
-    dynamic_list="$dynamic_list ext/$f/$base.$dlext"
+    dynamic_list="$dynamic_list lib/auto/$f/$base.$dlext"
 done
 
 static_list=' '
 static_ai_list=' '
 for f in $static_ext; do
        base=`echo "$f" | sed 's/.*\///'`
-       static_list="$static_list ext/$f/$base.a"
+       static_list="$static_list lib/auto/$f/$base.a"
        if test -f ext/$f/AutoInit.c; then
            static_ai_list="$static_ai_list ext/$f/AutoInit.c"
        fi
@@ -75,18 +70,15 @@ $spitshell >Makefile <<'!NO!SUBS!'
 #  Makefile is used to generate makefile.  The only difference
 #  is that makefile has the dependencies filled in at the end.
 #
-# 
+#
 !NO!SUBS!
 
 $spitshell >>Makefile <<!GROK!THIS!
 # I now supply perly.c with the kits, so don't remake perly.c without byacc
 BYACC = $byacc
 CC = $cc
-bin = $installbin
-scriptdir = $scriptdir
-privlib = $installprivlib
-mansrc = $mansrc
-manext = $manext
+LD = $ld
+
 LDFLAGS = $ldflags
 CLDFLAGS = $ldflags
 
@@ -98,11 +90,22 @@ LNS = $lns
 RMS = rm -f
 ranlib = $ranlib
 
+# The following are mentioned only to make metaconfig include the
+# appropriate questions in Configure.  If you want to change these,
+# edit config.sh instead, or specify --man1dir=/wherever on
+# installman commandline.
+bin = $installbin
+scriptdir = $scriptdir
+privlib = $installprivlib
+man1dir = $man1dir
+man1ext = $man1ext
+man3dir = $man3dir
+man3ext = $man3ext
+
 # The following are used to build and install shared libraries for
 # dynamic loading.
 LDDLFLAGS = $lddlflags
 CCDLFLAGS = $ccdlflags
-CCCDLFLAGS = $cccdlflags
 DLSUFFIX = .$dlext
 PLDLFLAGS = $pldlflags
 PLIBSUF = $plibsuf
@@ -112,16 +115,31 @@ dynamic_ext = $dynamic_list
 static_ext = $static_list
 ext = \$(dynamic_ext) \$(static_ext)
 static_ext_autoinit = $static_ai_list
-DYNALOADER = ext/DynaLoader/DynaLoader.a
+DYNALOADER = lib/auto/DynaLoader/DynaLoader.a
+
 
 libs = $libs $cryptlib
 
-public = perl $suidperl
+public = perl $suidperl utilities translators
 
 shellflags = $shellflags
 
 ## To use an alternate make, set \$altmake in config.sh.
 MAKE = ${altmake-make}
+
+# These variables will be used in a future version to make
+# the make file more portable to non-unix systems.
+AR = $ar
+EXE_EXT = $exe_ext
+LIB_EXT = $lib_ext
+OBJ_EXT = $obj_ext
+PATH_SEP = $path_sep
+
+FIRSTMAKEFILE = $firstmakefile
+
+# Any special object files needed by this architecture, e.g. os2/os2.obj
+ARCHOBJS = $archobjs
+
 !GROK!THIS!
 
 ## In the following dollars and backticks do not need the extra backslash.
@@ -129,17 +147,26 @@ $spitshell >>Makefile <<'!NO!SUBS!'
 
 CCCMD = `sh $(shellflags) cflags $(perllib) $@`
 
-private = 
+private = preplibrary lib/ExtUtils/Miniperl.pm lib/Config.pm
 
-scripts =
+# Files to be built with variable substitution before miniperl
+# is available.
+sh = Makefile.SH cflags.SH config_h.SH makeaperl.SH makedepend.SH \
+       makedir.SH perl_exp.SH writemain.SH
 
-manpages = perl.man
+shextract = Makefile cflags config.h makeaperl makedepend \
+       makedir perl_exp writemain
 
-util =
+# Files to be built with variable substitution after miniperl is
+# available.  Dependencies handled manually below (for now).
 
-sh = Makefile.SH cflags.SH makedepend.SH makedir.SH writemain.SH
+pl = pod/pod2html.PL pod/pod2latex.PL pod/pod2man.PL pod/pod2text.PL
 
-h1 = EXTERN.h INTERN.h XSUB.h av.h config.h cop.h cv.h dosish.h 
+plextract = pod/pod2html pod/pod2latex pod/pod2man pod/pod2text
+
+addedbyconf = UU $(shextract) $(plextract) pstruct
+
+h1 = EXTERN.h INTERN.h XSUB.h av.h config.h cop.h cv.h dosish.h
 h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h
 h3 = opcode.h patchlevel.h perl.h perly.h pp.h proto.h regcomp.h
 h4 = regexp.h scope.h sv.h unixish.h util.h
@@ -155,7 +182,8 @@ obj1 = $(mallocobj) gv.o toke.o perly.o op.o regcomp.o dump.o util.o mg.o
 obj2 = hv.o av.o run.o pp_hot.o sv.o pp.o scope.o pp_ctl.o pp_sys.o
 obj3 = doop.o doio.o regexec.o taint.o deb.o globals.o
 
-obj = $(obj1) $(obj2) $(obj3)
+
+obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
 
 # Once perl has been Configure'd and built ok you build different
 # perl variants (Debugging, Embedded, Multiplicity etc) by saying:
@@ -170,30 +198,41 @@ perllib = libperl$(PLIBSUF)
 
 lintflags = -hbvxac
 
-addedbyconf = UU
-
 # grrr
 SHELL = /bin/sh
 
 .c.o:
        $(CCCMD) $(PLDLFLAGS) $*.c
 
-all: makefile miniperl preplibrary $(public) $(dynamic_ext)
+all: makefile miniperl $(private) $(plextract) $(public) $(dynamic_ext)
+       @echo " "; echo "       Everything is up to date."
+
+translators:   miniperl lib/Config.pm FORCE
        @echo " "; echo "       Making x2p stuff"; cd x2p; $(MAKE) all
-       @echo " "; echo "       Making docs"; cd pod; $(MAKE) all;
+
+utilities:     miniperl lib/Config.pm FORCE
+       @echo " "; echo "       Making utilities"; cd utils; $(MAKE) all
+
+
+# This is now done by installman only if you actually want the man pages.
+#      @echo " "; echo "       Making docs"; cd pod; $(MAKE) all;
 
 # Phony target to force checking subdirectories.
+# Apparently some makes require an action for the FORCE target.
 FORCE:
+       @sh -c true
 
-!NO!SUBS!
-
-: Now on to the rest of the Makefile.
-$spitshell >>Makefile <<'!NO!SUBS!'
 # The $& notation tells Sequent machines that it can do a parallel make,
 # and is harmless otherwise.
+# The miniperl -w -MExporter line is a basic cheap test to catch errors
+# before make goes on to run preplibrary and then MakeMaker on extensions.
+# This is very handy because later errors are often caused by miniperl
+# build problems but that's not obvious to the novice.
+# The Module used here must not depend on Config or any extensions.
 
 miniperl: $& miniperlmain.o $(perllib)
        $(CC) $(LARGE) $(CLDFLAGS) -o miniperl miniperlmain.o $(perllib) $(libs)
+       @./miniperl -w -Ilib -MExporter -e 0 || $(MAKE) minitest
 
 miniperlmain.o: miniperlmain.c
        $(CCCMD) $(PLDLFLAGS) $*.c
@@ -208,7 +247,7 @@ perlmain.o: perlmain.c
 # The file ext.libs is a list of libraries that must be linked in
 # for static extensions, e.g. -lm -lgdbm, etc.  The individual
 # static extension Makefile's add to it.
-ext.libs:      $(static_ext)
+ext.libs: $(static_ext)
        -@test -f ext.libs || touch ext.libs
 
 perl: $& perlmain.o $(perllib) $(DYNALOADER) $(static_ext) ext.libs
@@ -226,12 +265,13 @@ $(perllib): $& perl.o $(obj)
 case "$d_shrplib" in
 *define*)
 $spitshell >>Makefile <<'!NO!SUBS!'
-       ld $(LDDLFLAGS) -o $@ perl.o $(obj)
+       $(LD) $(LDDLFLAGS) -o $@ perl.o $(obj)
 !NO!SUBS!
 ;;
 *)
 $spitshell >>Makefile <<'!NO!SUBS!'
-       ar rcu $(perllib) perl.o $(obj)
+       rm -f $(perllib)
+       $(AR) rcu $(perllib) perl.o $(obj)
        @$(ranlib) $(perllib)
 !NO!SUBS!
 ;;
@@ -253,62 +293,78 @@ sperl.o: perl.c perly.h patchlevel.h $(h)
        $(CCCMD) -DIAMSUID sperl.c
        $(RMS) sperl.c
 
-opcode.h: opcode.pl
-       - perl opcode.pl
-
-embed.h: embed_h.sh global.sym interp.sym
-       sh embed_h.sh
-
-preplibrary: miniperl lib/Config.pm
+# We have to call our ./makedir because Ultrix 4.3 make can't handle the line
+#      test -d lib/auto || mkdir lib/auto
+#
+preplibrary: miniperl lib/Config.pm $(plextract)
        @./makedir lib/auto
        @echo " AutoSplitting perl library"
        @./miniperl -Ilib -e 'use AutoSplit; \
                autosplit_lib_modules(@ARGV)' lib/*.pm lib/*/*.pm
 
+# Take care to avoid modifying lib/Config.pm without reason
 lib/Config.pm: config.sh miniperl
-       ./miniperl configpm
+       ./miniperl configpm tmp
+       sh mv-if-diff tmp lib/Config.pm
 
-install: all
-       ./perl installperl
-!NO!SUBS!
+lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl minimod.pl lib/Config.pm
+       ./miniperl minimod.pl > tmp && mv tmp $@
 
-: Only print out the rules for running byacc if the user _has_ byacc.
-: Otherwise, comment them out.  Users who really know what they are
-: doing can uncomment them and run yacc or bison or whatever.
-case "$byacc" in
-'')
-       comment1='#' 
-       comment2='' ;;
-*)     comment1=''
-       comment2='#' ;;
-esac
-
-$spitshell >>Makefile <<!GROK!THIS!
+$(plextract):  miniperl lib/Config.pm
+       ./miniperl -Ilib $@.PL
 
-perly.h: perly.c
-       @ echo Dummy dependency for dumb parallel make
-       touch perly.h
+install: all install.perl install.man
 
-# I now supply perly.c with the kits, so the following section is
-# used only if you have byacc.
+install.perl:  all
+       ./perl installperl
 
-${comment1}perly.c:    perly.y perly.c.diff
-${comment1}    @ echo 'Expect' 109 shift/reduce and 1 reduce/reduce conflict
-${comment1}    \$(BYACC) -d perly.y
-${comment1}    sh \$(shellflags) ./perly.fixer y.tab.c perly.c
-${comment1}    mv y.tab.h perly.h
-${comment1}    echo 'extern YYSTYPE yylval;' >>perly.h
+install.man:   all
+       ./perl installman
 
-# This version is used if you do not have byacc.
-${comment2}perly.c:    perly.y
-${comment2}    touch perly.c
+# Not implemented yet.
+#install.html: all
+#      ./perl installhtml
 
-!GROK!THIS!
+# I now supply perly.c with the kits, so the following section is
+# used only if you force byacc to run by saying
+#      make run_byacc
+# Since we patch up the byacc output, the perly.fixer script needs
+# to run with precisely the same version of byacc as I use.  You
+# normally shouldn't remake perly.[ch].
+
+run_byacc:     FORCE
+       @ echo 'Expect' 130 shift/reduce and 1 reduce/reduce conflict
+       $(BYACC) -d perly.y
+       sh $(shellflags) ./perly.fixer y.tab.c perly.c
+       mv y.tab.h perly.h
+       echo 'extern YYSTYPE yylval;' >>perly.h
+       - perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms
+
+# We don't want to regenerate perly.c and perly.h, but they might
+# appear out-of-date after a patch is applied or a new distribution is
+# made.
+perly.c: perly.y
+       -@touch perly.c
+
+perly.h: perly.y
+       -@touch perly.h
+
+# The following three header files are generated automatically
+#      keywords.h:     keywords.pl
+#      opcode.h:       opcode.pl
+#      embed.h:        embed.pl global.sym interp.sym
+# The correct versions should be already supplied with the perl kit,
+# in case you don't have perl available.
+# To force them to run, type
+#      make regen_headers
+regen_headers: FORCE
+       perl keywords.pl
+       perl opcode.pl
+       perl embed.pl
 
-$spitshell >>Makefile <<'!NO!SUBS!'
 # Extensions:
 # Names added to $(dynamic_ext) or $(static_ext) will automatically
-# get built.  There should ordinarily be no need to change any of 
+# get built.  There should ordinarily be no need to change any of
 # this part of makefile.
 #
 # The dummy dependency is a place holder in case $(dynamic_ext) or
@@ -317,41 +373,46 @@ $spitshell >>Makefile <<'!NO!SUBS!'
 # DynaLoader may be needed for extensions that use Makefile.PL.
 
 $(DYNALOADER): miniperl preplibrary FORCE
-       @sh ext/util/make_ext static $@
+       @sh ext/util/make_ext static $@ LIBPERL_A=$(perllib)
 
 d_dummy $(dynamic_ext):        miniperl preplibrary $(DYNALOADER) FORCE
-       @sh ext/util/make_ext dynamic $@
+       @sh ext/util/make_ext dynamic $@ LIBPERL_A=$(perllib)
 
 s_dummy $(static_ext): miniperl preplibrary $(DYNALOADER) FORCE
-       @sh ext/util/make_ext static $@
+       @sh ext/util/make_ext static $@ LIBPERL_A=$(perllib)
 
 clean:
        rm -f *.o *.a all perlmain.c
-       rm -f perl.exp ext.libs ext/util/extlibist
-       -cd x2p; $(MAKE) clean
+       rm -f perl.exp ext.libs
        -cd pod; $(MAKE) clean
-       @for x in $(dynamic_ext) $(static_ext) ; do \
+       -cd utils; $(MAKE) clean
+       -cd x2p; $(MAKE) clean
+       -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) ; do \
        sh ext/util/make_ext clean $$x ; \
        done
        rm -f perl suidperl miniperl $(perllib)
 
 realclean: clean
+       -cd os2; rm -f Makefile
+       -cd pod; $(MAKE) realclean
+       -cd utils; $(MAKE) realclean
        -cd x2p; $(MAKE) realclean
-       @for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) ; do \
+       -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) ; do \
        sh ext/util/make_ext realclean $$x ; \
        done
        rm -f *.orig */*.orig *~ */*~ core t/core t/c t/perl
        rm -rf $(addedbyconf)
-       rm -f Makefile cflags makedepend makedir writemain
-       rm -f config.h makefile makefile.old
-       rm -f lib/Config.pm
+       rm -f makefile makefile.old
+       rm -f $(private)
        rm -rf lib/auto
-       rm -f h2ph h2ph.man c2ph pstruct
+       rm -f lib/.exists
+       rm -f h2ph.man pstruct
        rm -rf .config
+       @echo "Note that make realclean does not delete config.sh"
 
 clobber:       realclean
        rm -f config.sh cppstdin
-    
+
 distclean:     clobber
 
 # The following lint has practically everything turned on.  Unfortunately,
@@ -363,13 +424,14 @@ lint: perly.c $(c)
        lint $(lintflags) $(defs) perly.c $(c) > perl.fuzz
 
 makefile:      Makefile
-       make depend
+       $(MAKE) depend
+
+config.h: config.sh
+       /bin/sh config_h.SH
 
 # When done, touch perlmain.c so that it doesn't get remade each time.
 depend: makedepend
-       - test -f perly.h || cp /dev/null perly.h
        ./makedepend
-       - test -s perly.h || /bin/rm -f perly.h
        - test -s perlmain.c && touch perlmain.c
        cd x2p; $(MAKE) depend
 
@@ -377,6 +439,11 @@ test: miniperl perl preplibrary $(dynamic_ext)
        - cd t && chmod +x TEST */*.t
        - cd t && (rm -f perl; $(LNS) ../perl perl) && ./perl TEST </dev/tty
 
+minitest: miniperl
+       - cd t && chmod +x TEST */*.t
+       - cd t && (rm -f perl; $(LNS) ../miniperl perl) \
+               && ./perl TEST base/*.t comp/*.t cmd/*.t io/*.t op/*.t </dev/tty
+
 clist: $(c)
        echo $(c) | tr ' ' '\012' >.clist
 
@@ -386,6 +453,9 @@ hlist:  $(h)
 shlist: $(sh)
        echo $(sh) | tr ' ' '\012' >.shlist
 
+pllist: $(pl)
+       echo $(pl) | tr ' ' '\012' >.pllist
+
 # AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE
 # If this runs make out of memory, delete /usr/include lines.
 !NO!SUBS!
@@ -398,5 +468,3 @@ case `pwd` in
     ;;
 esac
 rm -f makefile
-
-