Note B::Debug deprecation in perldelta and Porting/Maintainers.pl

[perl5.git] / config_h.SH

diff --git a/config_h.SH b/config_h.SH
index a6bda7b..e9b144f 100755 (executable)
--- a/config_h.SH
+++ b/config_h.SH
@@ -1942,9 +1942,34 @@ sed <<!GROK!THIS! >$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un
  *     LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_BE_BE
  *     LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_LE_BE
  *     LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_BE_LE
+ *     LONG_DOUBLE_IS_VAX_H_FLOAT
  *     LONG_DOUBLE_IS_UNKNOWN_FORMAT
  *     It is only defined if the system supports long doubles.
  */
+/* LONG_DOUBLE_STYLE_IEEE:
+ *     This symbol, if defined, indicates that the long double
+ *     is any of the IEEE 754 style long doubles:
+ *     LONG_DOUBLE_STYLE_IEEE_STD, LONG_DOUBLE_STYLE_IEEE_EXTENDED,
+ *     LONG_DOUBLE_STYLE_IEEE_DOUBLEDOUBLE.
+ */
+/* LONG_DOUBLE_STYLE_IEEE_DOUBLEDOUBLE:
+ *     This symbol, if defined, indicates that the long double is
+ *     the 128-bit double-double.
+ */
+/* LONG_DOUBLE_STYLE_IEEE_EXTENDED:
+ *     This symbol, if defined, indicates that the long double is
+ *     the 80-bit IEEE 754. Note that despite the 'extended' this
+ *     is less than the 'std', since this is an extension of
+ *     the double precision.
+ */
+/* LONG_DOUBLE_STYLE_IEEE_STD:
+ *     This symbol, if defined, indicates that the long double is
+ *     the 128-bit IEEE 754.
+ */
+/* LONG_DOUBLE_STYLE_VAX:
+ *     This symbol, if defined, indicates that the long double is
+ *     the 128-bit VAX format H.
+ */
 #$d_ldexpl  HAS_LDEXPL         /**/
 #$d_longdbl HAS_LONG_DOUBLE            /**/
 #ifdef HAS_LONG_DOUBLE
@@ -1963,6 +1988,11 @@ sed <<!GROK!THIS! >$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un
 #define LONG_DOUBLE_IS_UNKNOWN_FORMAT                  -1
 #define LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_LITTLE_ENDIAN      LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_LE_LE /* back-compat */
 #define LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_BIG_ENDIAN LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_BE_BE /* back-compat */
+#$d_long_double_style_ieee LONG_DOUBLE_STYLE_IEEE
+#$d_long_double_style_ieee_doubledouble LONG_DOUBLE_STYLE_IEEE_DOUBLEDOUBLE
+#$d_long_double_style_ieee_extended LONG_DOUBLE_STYLE_IEEE_EXTENDED
+#$d_long_double_style_ieee_std LONG_DOUBLE_STYLE_IEEE_STD
+#$d_long_double_style_vax LONG_DOUBLE_STYLE_VAX
 #endif
 
 /* HAS_LONG_LONG:
@@ -2881,6 +2911,13 @@ sed <<!GROK!THIS! >$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un
  */
 #$d_futimes HAS_FUTIMES                /**/
 
+/* HAS_GAI_STRERROR:
+ *     This symbol, if defined, indicates that the gai_strerror routine
+ *     is available to translate error codes returned by getaddrinfo()
+ *     into human readable strings.
+ */
+#$d_gai_strerror HAS_GAI_STRERROR      /**/
+
 /* HAS_GETADDRINFO:
  *     This symbol, if defined, indicates that the getaddrinfo() function
  *     is available for use.
@@ -3699,6 +3736,12 @@ sed <<!GROK!THIS! >$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un
  */
 #$d_writev HAS_WRITEV          /**/
 
+/* DEFAULT_INC_EXCLUDES_DOT:
+ *     This symbol, if defined, removes the legacy default behavior of
+ *     including '.' at the end of @INC.
+ */
+#$default_inc_excludes_dot DEFAULT_INC_EXCLUDES_DOT    /**/
+
 /* USE_DYNAMIC_LOADING:
  *     This symbol, if defined, indicates that dynamic loading of
  *     some sort is available.
@@ -3974,8 +4017,43 @@ sed <<!GROK!THIS! >$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un
  *     DOUBLE_IS_VAX_F_FLOAT
  *     DOUBLE_IS_VAX_D_FLOAT
  *     DOUBLE_IS_VAX_G_FLOAT
+ *     DOUBLE_IS_IBM_SINGLE_32_BIT
+ *     DOUBLE_IS_IBM_DOUBLE_64_BIT
+ *     DOUBLE_IS_CRAY_SINGLE_64_BIT
  *     DOUBLE_IS_UNKNOWN_FORMAT
  */
+/* DOUBLE_HAS_INF:
+ *     This symbol, if defined, indicates that the double has
+ *     the infinity.
+ */
+/* DOUBLE_HAS_NAN:
+ *     This symbol, if defined, indicates that the double has
+ *     the not-a-number.
+ */
+/* DOUBLE_HAS_NEGATIVE_ZERO:
+ *     This symbol, if defined, indicates that the double has
+ *     the negative_zero.
+ */
+/* DOUBLE_HAS_SUBNORMALS:
+ *     This symbol, if defined, indicates that the double has
+ *     the subnormals (denormals).
+ */
+/* DOUBLE_STYLE_CRAY:
+ *     This symbol, if defined, indicates that the double is
+ *     the 64-bit CRAY mainframe format.
+ */
+/* DOUBLE_STYLE_IBM:
+ *     This symbol, if defined, indicates that the double is
+ *     the 64-bit IBM mainframe format.
+ */
+/* DOUBLE_STYLE_IEEE:
+ *     This symbol, if defined, indicates that the double is
+ *     the 64-bit IEEE 754.
+ */
+/* DOUBLE_STYLE_VAX:
+ *     This symbol, if defined, indicates that the double is
+ *     the 64-bit VAX format D or G.
+ */
 #define DOUBLEKIND $doublekind         /**/
 #define DOUBLE_IS_IEEE_754_32_BIT_LITTLE_ENDIAN        1
 #define DOUBLE_IS_IEEE_754_32_BIT_BIG_ENDIAN   2
@@ -3988,11 +4066,22 @@ sed <<!GROK!THIS! >$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un
 #define DOUBLE_IS_VAX_F_FLOAT  9
 #define DOUBLE_IS_VAX_D_FLOAT  10
 #define DOUBLE_IS_VAX_G_FLOAT  11
+#define DOUBLE_IS_IBM_SINGLE_32_BIT    12
+#define DOUBLE_IS_IBM_DOUBLE_64_BIT    13
+#define DOUBLE_IS_CRAY_SINGLE_64_BIT   14
 #define DOUBLE_IS_UNKNOWN_FORMAT               -1
 #$d_PRIfldbl PERL_PRIfldbl     $sPRIfldbl      /**/
 #$d_PRIgldbl PERL_PRIgldbl     $sPRIgldbl      /**/
 #$d_PRIeldbl PERL_PRIeldbl     $sPRIeldbl      /**/
 #$d_SCNfldbl PERL_SCNfldbl     $sSCNfldbl      /**/
+#$d_double_has_inf DOUBLE_HAS_INF
+#$d_double_has_nan DOUBLE_HAS_NAN
+#$d_double_has_negative_zero DOUBLE_HAS_NEGATIVE_ZERO
+#$d_double_has_subnormals DOUBLE_HAS_SUBNORMALS
+#$d_double_style_cray DOUBLE_STYLE_CRAY
+#$d_double_style_ibm DOUBLE_STYLE_IBM
+#$d_double_style_ieee DOUBLE_STYLE_IEEE
+#$d_double_style_vax DOUBLE_STYLE_VAX
 
 /* DOUBLEMANTBITS:
  *     This symbol, if defined, tells how many mantissa bits