AV which is @_. Other entries are storage for variables and op targets.
Iterating over the PADNAMELIST iterates over all possible pad
-items. Pad slots for targets (SVs_PADTMP) and GVs end up having &PL_sv_no
+items. Pad slots for targets (SVs_PADTMP)
+and GVs end up having &PL_sv_undef
"names", while slots for constants have &PL_sv_no "names" (see
pad_alloc()). That &PL_sv_no is used is an implementation detail subject
to change. To test for it, use C<PadnamePV(name) && !PadnameLEN(name)>.
STMT_START { ((XPVNV*)SvANY(sv))->xnv_u.xpad_cop_seq.xhigh = (val); } STMT_END
/*
-=for apidoc mx|void|pad_peg|const char *s
-
-When PERL_MAD is enabled, this is a small no-op function that gets called
-at the start of each pad-related function. It can be breakpointed to
-track all pad operations. The parameter is a string indicating the type
-of pad operation being performed.
-
-=cut
-*/
-
-#ifdef PERL_MAD
-void pad_peg(const char* s) {
- static int pegcnt; /* XXX not threadsafe */
- PERL_UNUSED_ARG(s);
-
- PERL_ARGS_ASSERT_PAD_PEG;
-
- pegcnt++;
-}
-#endif
-
-/*
This is basically sv_eq_flags() in sv.c, but we avoid the magic
and bytes checking.
*/
PADLIST *
Perl_pad_new(pTHX_ int flags)
{
- dVAR;
PADLIST *padlist;
PAD *padname, *pad;
PAD **ary;
if (! (flags & padnew_CLONE)) {
SAVESPTR(PL_comppad_name);
SAVEI32(PL_padix);
+ SAVEI32(PL_constpadix);
SAVEI32(PL_comppad_name_fill);
SAVEI32(PL_min_intro_pending);
SAVEI32(PL_max_intro_pending);
PL_comppad_name_fill = 0;
PL_min_intro_pending = 0;
PL_padix = 0;
+ PL_constpadix = 0;
PL_cv_has_eval = 0;
}
void
Perl_cv_undef(pTHX_ CV *cv)
{
- dVAR;
+ PERL_ARGS_ASSERT_CV_UNDEF;
+ cv_undef_flags(cv, 0);
+}
+
+void
+Perl_cv_undef_flags(pTHX_ CV *cv, U32 flags)
+{
const PADLIST *padlist = CvPADLIST(cv);
bool const slabbed = !!CvSLABBED(cv);
- PERL_ARGS_ASSERT_CV_UNDEF;
+ PERL_ARGS_ASSERT_CV_UNDEF_FLAGS;
DEBUG_X(PerlIO_printf(Perl_debug_log,
"CV undef: cv=0x%"UVxf" comppad=0x%"UVxf"\n",
#endif
SvPOK_off(MUTABLE_SV(cv)); /* forget prototype */
sv_unmagic((SV *)cv, PERL_MAGIC_checkcall);
- if (CvNAMED(cv)) CvNAME_HEK_set(cv, NULL);
- else CvGV_set(cv, NULL);
+ if (!(flags & CV_UNDEF_KEEP_NAME)) {
+ if (CvNAMED(cv)) {
+ CvNAME_HEK_set(cv, NULL);
+ CvNAMED_off(cv);
+ }
+ else CvGV_set(cv, NULL);
+ }
/* This statement and the subsequence if block was pad_undef(). */
pad_peg("pad_undef");
CvXSUB(cv) = NULL;
}
/* delete all flags except WEAKOUTSIDE and CVGV_RC, which indicate the
- * ref status of CvOUTSIDE and CvGV, and ANON, which pp_entersub uses
- * to choose an error message */
- CvFLAGS(cv) &= (CVf_WEAKOUTSIDE|CVf_CVGV_RC|CVf_ANON);
+ * ref status of CvOUTSIDE and CvGV, and ANON, NAMED and
+ * LEXICAL, which are used to determine the sub's name. */
+ CvFLAGS(cv) &= (CVf_WEAKOUTSIDE|CVf_CVGV_RC|CVf_ANON|CVf_LEXICAL
+ |CVf_NAMED);
}
/*
static PADOFFSET
S_pad_alloc_name(pTHX_ SV *namesv, U32 flags, HV *typestash, HV *ourstash)
{
- dVAR;
const PADOFFSET offset = pad_alloc(OP_PADSV, SVs_PADMY);
PERL_ARGS_ASSERT_PAD_ALLOC_NAME;
Perl_pad_add_name_pvn(pTHX_ const char *namepv, STRLEN namelen,
U32 flags, HV *typestash, HV *ourstash)
{
- dVAR;
PADOFFSET offset;
SV *namesv;
bool is_utf8;
PADOFFSET
Perl_pad_alloc(pTHX_ I32 optype, U32 tmptype)
{
- dVAR;
SV *sv;
I32 retval;
AvARRAY(PL_comppad), PL_curpad);
if (PL_pad_reset_pending)
pad_reset();
- if (tmptype & SVs_PADMY) {
+ if (tmptype == SVs_PADMY) { /* Not & because this ‘flag’ is 0. */
/* For a my, simply push a null SV onto the end of PL_comppad. */
sv = *av_fetch(PL_comppad, AvFILLp(PL_comppad) + 1, TRUE);
retval = AvFILLp(PL_comppad);
else {
/* For a tmp, scan the pad from PL_padix upwards
* for a slot which has no name and no active value.
+ * For a constant, likewise, but use PL_constpadix.
*/
SV * const * const names = AvARRAY(PL_comppad_name);
const SSize_t names_fill = AvFILLp(PL_comppad_name);
+ const bool konst = cBOOL(tmptype & SVf_READONLY);
+ retval = konst ? PL_constpadix : PL_padix;
for (;;) {
/*
* Entries that close over unavailable variables
* in outer subs contain values not marked PADMY.
* Thus we must skip, not just pad values that are
* marked as current pad values, but also those with names.
+ * If pad_reset is enabled, ‘current’ means different
+ * things depending on whether we are allocating a con-
+ * stant or a target. For a target, things marked PADTMP
+ * can be reused; not so for constants.
*/
- if (++PL_padix <= names_fill &&
- (sv = names[PL_padix]) && sv != &PL_sv_undef)
+ if (++retval <= names_fill &&
+ (sv = names[retval]) && sv != &PL_sv_undef)
continue;
- sv = *av_fetch(PL_comppad, PL_padix, TRUE);
- if (!(SvFLAGS(sv) & (SVs_PADTMP | SVs_PADMY)) &&
- !IS_PADGV(sv))
+ sv = *av_fetch(PL_comppad, retval, TRUE);
+ if (!(SvFLAGS(sv) &
+#ifdef USE_PAD_RESET
+ (konst ? SVs_PADTMP : 0))
+#else
+ SVs_PADTMP
+#endif
+ ))
break;
}
- if (tmptype & SVf_READONLY) {
- av_store(PL_comppad_name, PL_padix, &PL_sv_no);
+ if (konst) {
+ av_store(PL_comppad_name, retval, &PL_sv_no);
tmptype &= ~SVf_READONLY;
tmptype |= SVs_PADTMP;
}
- retval = PL_padix;
+ *(konst ? &PL_constpadix : &PL_padix) = retval;
}
SvFLAGS(sv) |= tmptype;
PL_curpad = AvARRAY(PL_comppad);
PADOFFSET
Perl_pad_add_anon(pTHX_ CV* func, I32 optype)
{
- dVAR;
PADOFFSET ix;
SV* const name = newSV_type(SVt_PVNV);
assert (SvTYPE(func) == SVt_PVFM);
av_store(PL_comppad, ix, rv);
}
- SvPADMY_on((SV*)func);
/* to avoid ref loops, we never have parent + child referencing each
* other simultaneously */
STATIC void
S_pad_check_dup(pTHX_ SV *name, U32 flags, const HV *ourstash)
{
- dVAR;
SV **svp;
PADOFFSET top, off;
const U32 is_our = flags & padadd_OUR;
PADOFFSET
Perl_pad_findmy_pvn(pTHX_ const char *namepv, STRLEN namelen, U32 flags)
{
- dVAR;
SV *out_sv;
int out_flags;
I32 offset;
if ((PADOFFSET)offset != NOT_IN_PAD)
return offset;
+ /* Skip the ‘our’ hack for subroutines, as the warning does not apply.
+ */
+ if (*namepv == '&') return NOT_IN_PAD;
+
/* look for an our that's being introduced; this allows
* our $foo = 0 unless defined $foo;
* to not give a warning. (Yes, this is a hack) */
nameav = PadlistARRAY(CvPADLIST(PL_compcv))[0];
name_svp = AvARRAY(nameav);
- for (offset = AvFILLp(nameav); offset > 0; offset--) {
+ for (offset = PadnamelistMAXNAMED(nameav); offset > 0; offset--) {
const SV * const namesv = name_svp[offset];
if (namesv && PadnameLEN(namesv) == namelen
&& !SvFAKE(namesv)
PADOFFSET
Perl_find_rundefsvoffset(pTHX)
{
- dVAR;
SV *out_sv;
int out_flags;
return pad_findlex("$_", 2, 0, find_runcv(NULL), PL_curcop->cop_seq, 1,
S_pad_findlex(pTHX_ const char *namepv, STRLEN namelen, U32 flags, const CV* cv, U32 seq,
int warn, SV** out_capture, SV** out_name_sv, int *out_flags)
{
- dVAR;
I32 offset, new_offset;
SV *new_capture;
SV **new_capturep;
SV *
Perl_pad_sv(pTHX_ PADOFFSET po)
{
- dVAR;
ASSERT_CURPAD_ACTIVE("pad_sv");
if (!po)
void
Perl_pad_setsv(pTHX_ PADOFFSET po, SV* sv)
{
- dVAR;
-
PERL_ARGS_ASSERT_PAD_SETSV;
ASSERT_CURPAD_ACTIVE("pad_setsv");
void
Perl_pad_block_start(pTHX_ int full)
{
- dVAR;
ASSERT_CURPAD_ACTIVE("pad_block_start");
SAVEI32(PL_comppad_name_floor);
PL_comppad_name_floor = AvFILLp(PL_comppad_name);
PL_min_intro_pending = 0;
SAVEI32(PL_comppad_name_fill);
SAVEI32(PL_padix_floor);
+ /* PL_padix_floor is what PL_padix is reset to at the start of each
+ statement, by pad_reset(). We set it when entering a new scope
+ to keep things like this working:
+ print "$foo$bar", do { this(); that() . "foo" };
+ We must not let "$foo$bar" and the later concatenation share the
+ same target. */
PL_padix_floor = PL_padix;
PL_pad_reset_pending = FALSE;
}
U32
Perl_intro_my(pTHX)
{
- dVAR;
SV **svp;
I32 i;
U32 seq;
OP *
Perl_pad_leavemy(pTHX)
{
- dVAR;
I32 off;
OP *o = NULL;
SV * const * const svp = AvARRAY(PL_comppad_name);
void
Perl_pad_swipe(pTHX_ PADOFFSET po, bool refadjust)
{
- dVAR;
ASSERT_CURPAD_LEGAL("pad_swipe");
if (!PL_curpad)
return;
/* if pad tmps aren't shared between ops, then there's no need to
* create a new tmp when an existing op is freed */
-#ifdef USE_BROKEN_PAD_RESET
+#ifdef USE_PAD_RESET
PL_curpad[po] = newSV(0);
SvPADTMP_on(PL_curpad[po]);
#else
}
PadnamelistARRAY(PL_comppad_name)[po] = &PL_sv_undef;
}
- if ((I32)po < PL_padix)
- PL_padix = po - 1;
+ /* Use PL_constpadix here, not PL_padix. The latter may have been
+ reset by pad_reset. We don’t want pad_alloc to have to scan the
+ whole pad when allocating a constant. */
+ if ((I32)po < PL_constpadix)
+ PL_constpadix = po - 1;
}
/*
=cut
*/
-/* XXX pad_reset() is currently disabled because it results in serious bugs.
- * It causes pad temp TARGs to be shared between OPs. Since TARGs are pushed
- * on the stack by OPs that use them, there are several ways to get an alias
- * to a shared TARG. Such an alias will change randomly and unpredictably.
- * We avoid doing this until we can think of a Better Way.
- * GSAR 97-10-29 */
+/* pad_reset() causes pad temp TARGs (operator targets) to be shared
+ * between OPs from different statements. During compilation, at the start
+ * of each statement pad_reset resets PL_padix back to its previous value.
+ * When allocating a target, pad_alloc begins its scan through the pad at
+ * PL_padix+1. */
static void
S_pad_reset(pTHX)
{
- dVAR;
-#ifdef USE_BROKEN_PAD_RESET
+#ifdef USE_PAD_RESET
if (AvARRAY(PL_comppad) != PL_curpad)
Perl_croak(aTHX_ "panic: pad_reset curpad, %p!=%p",
AvARRAY(PL_comppad), PL_curpad);
);
if (!TAINTING_get) { /* Can't mix tainted and non-tainted temporaries. */
- I32 po;
- for (po = AvMAX(PL_comppad); po > PL_padix_floor; po--) {
- if (PL_curpad[po] && !SvIMMORTAL(PL_curpad[po]))
- SvPADTMP_off(PL_curpad[po]);
- }
PL_padix = PL_padix_floor;
}
#endif
* pad are anonymous subs, constants and GVs.
* The rest are created anew during cloning.
*/
- if (!PL_curpad[ix] || SvIMMORTAL(PL_curpad[ix])
- || IS_PADGV(PL_curpad[ix]))
+ if (!PL_curpad[ix] || SvIMMORTAL(PL_curpad[ix]))
continue;
namesv = namep[ix];
if (!(PadnamePV(namesv) &&
PADOFFSET ix;
for (ix = AvFILLp(PL_comppad); ix > 0; ix--) {
if (!namep[ix]) namep[ix] = &PL_sv_undef;
- if (!PL_curpad[ix] || SvIMMORTAL(PL_curpad[ix])
- || IS_PADGV(PL_curpad[ix]) || IS_PADCONST(PL_curpad[ix]))
+ if (!PL_curpad[ix] || SvIMMORTAL(PL_curpad[ix]))
continue;
- if (!SvPADMY(PL_curpad[ix])) {
- SvPADTMP_on(PL_curpad[ix]);
- } else if (!SvFAKE(namep[ix])) {
+ if (SvPADMY(PL_curpad[ix]) && !SvFAKE(namep[ix])) {
/* This is a work around for how the current implementation of
?{ } blocks in regexps interacts with lexicals.
void
Perl_pad_free(pTHX_ PADOFFSET po)
{
- dVAR;
+#ifndef USE_PAD_RESET
SV *sv;
+#endif
ASSERT_CURPAD_LEGAL("pad_free");
if (!PL_curpad)
return;
PTR2UV(PL_comppad), PTR2UV(PL_curpad), (long)po)
);
-
+#ifndef USE_PAD_RESET
sv = PL_curpad[po];
if (sv && sv != &PL_sv_undef && !SvPADMY(sv))
SvFLAGS(sv) &= ~SVs_PADTMP;
if ((I32)po < PL_padix)
PL_padix = po - 1;
+#endif
}
/*
void
Perl_do_dump_pad(pTHX_ I32 level, PerlIO *file, PADLIST *padlist, int full)
{
- dVAR;
const AV *pad_name;
const AV *pad;
SV **pname;
STATIC void
S_cv_dump(pTHX_ const CV *cv, const char *title)
{
- dVAR;
const CV * const outside = CvOUTSIDE(cv);
PADLIST* const padlist = CvPADLIST(cv);
static void
S_cv_clone_pad(pTHX_ CV *proto, CV *cv, CV *outside, bool newcv)
{
- dVAR;
I32 ix;
PADLIST* const protopadlist = CvPADLIST(proto);
PAD *const protopad_name = *PadlistARRAY(protopadlist);
assert(SvTYPE(ppad[ix]) == SVt_PVCV);
subclones = 1;
sv = newSV_type(SVt_PVCV);
+ CvLEXICAL_on(sv);
}
else if (PadnameLEN(namesv)>1 && !PadnameIsOUR(namesv))
{
/* my sub */
/* Just provide a stub, but name it. It will be
upgrade to the real thing on scope entry. */
+ dVAR;
+ U32 hash;
+ PERL_HASH(hash, SvPVX_const(namesv)+1,
+ SvCUR(namesv) - 1);
sv = newSV_type(SVt_PVCV);
CvNAME_HEK_set(
sv,
share_hek(SvPVX_const(namesv)+1,
SvCUR(namesv) - 1
* (SvUTF8(namesv) ? -1 : 1),
- 0)
+ hash)
);
+ CvLEXICAL_on(sv);
}
else sv = SvREFCNT_inc(ppad[ix]);
else if (sigil == '@')
sv = MUTABLE_SV(newHV());
else
sv = newSV(0);
- SvPADMY_on(sv);
/* reset the 'assign only once' flag on each state var */
if (sigil != '&' && SvPAD_STATE(namesv))
SvPADSTALE_on(sv);
}
}
}
- else if (IS_PADGV(ppad[ix]) || (namesv && PadnamePV(namesv))) {
+ else if (namesv && PadnamePV(namesv)) {
sv = SvREFCNT_inc_NN(ppad[ix]);
}
else {
static CV *
S_cv_clone(pTHX_ CV *proto, CV *cv, CV *outside)
{
+#ifdef USE_ITHREADS
dVAR;
+#endif
const bool newcv = !cv;
assert(!CvUNIQUE(proto));
}
/*
+=for apidoc cv_name
+
+Returns an SV containing the name of the CV, mainly for use in error
+reporting. The CV may actually be a GV instead, in which case the returned
+SV holds the GV's name. Anything other than a GV or CV is treated as a
+string already holding the sub name, but this could change in the future.
+
+An SV may be passed as a second argument. If so, the name will be assigned
+to it and it will be returned. Otherwise the returned SV will be a new
+mortal.
+
+If the I<flags> include CV_NAME_NOTQUAL, then the package name will not be
+included. If the first argument is neither a CV nor a GV, this flag is
+ignored (subject to change).
+
+=cut
+*/
+
+SV *
+Perl_cv_name(pTHX_ CV *cv, SV *sv, U32 flags)
+{
+ PERL_ARGS_ASSERT_CV_NAME;
+ if (!isGV_with_GP(cv) && SvTYPE(cv) != SVt_PVCV) {
+ if (sv) sv_setsv(sv,(SV *)cv);
+ return sv ? (sv) : (SV *)cv;
+ }
+ {
+ SV * const retsv = sv ? (sv) : sv_newmortal();
+ if (SvTYPE(cv) == SVt_PVCV) {
+ if (CvNAMED(cv)) {
+ if (CvLEXICAL(cv) || flags & CV_NAME_NOTQUAL)
+ sv_sethek(retsv, CvNAME_HEK(cv));
+ else {
+ sv_sethek(retsv, HvNAME_HEK(CvSTASH(cv)));
+ sv_catpvs(retsv, "::");
+ sv_cathek(retsv, CvNAME_HEK(cv));
+ }
+ }
+ else if (CvLEXICAL(cv) || flags & CV_NAME_NOTQUAL)
+ sv_sethek(retsv, GvNAME_HEK(GvEGV(CvGV(cv))));
+ else gv_efullname3(retsv, CvGV(cv), NULL);
+ }
+ else if (flags & CV_NAME_NOTQUAL) sv_sethek(retsv, GvNAME_HEK(cv));
+ else gv_efullname3(retsv,(GV *)cv,NULL);
+ return retsv;
+ }
+}
+
+/*
=for apidoc m|void|pad_fixup_inner_anons|PADLIST *padlist|CV *old_cv|CV *new_cv
For any anon CVs in the pad, change CvOUTSIDE of that CV from
void
Perl_pad_fixup_inner_anons(pTHX_ PADLIST *padlist, CV *old_cv, CV *new_cv)
{
- dVAR;
I32 ix;
AV * const comppad_name = PadlistARRAY(padlist)[0];
AV * const comppad = PadlistARRAY(padlist)[1];
void
Perl_pad_push(pTHX_ PADLIST *padlist, int depth)
{
- dVAR;
-
PERL_ARGS_ASSERT_PAD_PUSH;
if (depth > PadlistMAX(padlist) || !PadlistARRAY(padlist)[depth]) {
else if (sigil == '%')
sv = MUTABLE_SV(newHV());
else
+ {
sv = newSV(0);
+ /* For flip-flop targets: */
+ if (oldpad[ix] && SvPADTMP(oldpad[ix]))
+ SvPADTMP_on(sv);
+ }
av_store(newpad, ix, sv);
- SvPADMY_on(sv);
}
}
- else if (IS_PADGV(oldpad[ix]) || PadnamePV(names[ix])) {
+ else if (PadnamePV(names[ix])) {
av_store(newpad, ix, SvREFCNT_inc_NN(oldpad[ix]));
}
else {
HV *
Perl_pad_compname_type(pTHX_ const PADOFFSET po)
{
- dVAR;
- SV* const * const av = av_fetch(PL_comppad_name, po, FALSE);
- if ( SvPAD_TYPED(*av) ) {
- return SvSTASH(*av);
+ SV* const av = PAD_COMPNAME_SV(po);
+ if ( SvPAD_TYPED(av) ) {
+ return SvSTASH(av);
}
return NULL;
}
else
sv = newSV(0);
pad1a[ix] = sv;
- SvPADMY_on(sv);
}
}
}
- else if (IS_PADGV(oldpad[ix])
- || ( names_fill >= ix && names[ix]
+ else if (( names_fill >= ix && names[ix]
&& PadnamePV(names[ix]) )) {
pad1a[ix] = sv_dup_inc(oldpad[ix], param);
}
/* SvREFCNT(oldpad[ix]) != 1 for some code in threads.xs
FIXTHAT before merging this branch.
(And I know how to) */
- if (SvPADMY(oldpad[ix]))
- SvPADMY_on(sv);
- else
+ if (SvPADTMP(oldpad[ix]))
SvPADTMP_on(sv);
}
}
PAD **
Perl_padlist_store(pTHX_ PADLIST *padlist, I32 key, PAD *val)
{
- dVAR;
PAD **ary;
SSize_t const oldmax = PadlistMAX(padlist);