Updated perldelta for some older changes that hadn't been included yet

[perl5.git] / hints / hpux.sh

diff --git a/hints/hpux.sh b/hints/hpux.sh
index f769e51..653b5a1 100644 (file)
--- a/hints/hpux.sh
+++ b/hints/hpux.sh
@@ -78,7 +78,7 @@ case `$cc -v 2>&1`"" in
            ccflags="$cc_cppflags"
            if [ "X$gccversion" = "X" ]; then
                # Done too late in Configure if hinted
-               gccversion=`$cc --version | sed 's/.*(GCC) *//'`
+               gccversion=`$cc -dumpversion`
                fi
            case "$gccversion" in
                [012]*) # HP-UX and gcc-2.* break UINT32_MAX :-(
@@ -157,7 +157,7 @@ case `$cc -v 2>&1`"" in
                done
            [ -z "$cc_found" ] && cc_found=`which cc`
            what $cc_found >&4
-           ccversion=`what $cc_found | awk '/Compiler/{print $2}/Itanium/{print $6,$7}'`
+           ccversion=`what $cc_found | awk '/Compiler/{print $2}/Itanium/{print $6,$7}/for Integrity/{print $6,$7}'`
            case "$ccflags" in
                "-Ae "*) ;;
                *)  ccflags="-Ae $cc_cppflags"
@@ -188,14 +188,17 @@ toke_cflags='ccflags="$ccflags -DARG_ZERO_IS_SCRIPT"'
     gcc_64native=no
 case "$ccisgcc" in
     $define|true|[Yy])
-       echo 'int main(){long l;printf("%d\\n",sizeof(l));}'>try.c
+       echo '#include <stdio.h>\nint main(){long l;printf("%d\\n",sizeof(l));}'>try.c
        $cc -o try $ccflags $ldflags try.c
        if [ "`try`" = "8" ]; then
-           cat <<EOM >&4
+           case "$use64bitall" in
+               $define|true|[Yy]) ;;
+               *)  cat <<EOM >&4
 
 *** This version of gcc uses 64 bit longs. -Duse64bitall is
 *** implicitly set to enable continuation
 EOM
+               esac
            use64bitall=$define
            gcc_64native=yes
            fi
@@ -215,21 +218,9 @@ case "$archname" in
        # While here, override so=sl auto-detection
        so='so'
        ;;
-    *)
-       case "$uselongdouble" in
-           *) ;;
-           $define|true|[yY]*)
-               cat <<EOM >&4
-
-*** long doubles are not (yet) supported on HP-UX (any version)
-*** Until it does, we cannot continue, aborting.
-EOM
-               exit 1 ;;
-           esac
-       ;;
     esac
 
-case "$use64bitint" in
+case "$use64bitall" in
     $define|true|[Yy])
 
        if [ "$xxOsRevMajor" -lt 11 ]; then
@@ -242,6 +233,15 @@ EOM
            exit 1
            fi
 
+       if [ $xxOsRev -eq 1100 ]; then
+           # HP-UX 11.00 uses only 48 bits internally in 64bit mode, not 64
+           # force min/max to 2**47-1
+           sGMTIME_max=140737488355327
+           sGMTIME_min=-62167219200
+           sLOCALTIME_max=140737488355327
+           sLOCALTIME_min=-62167219200
+           fi
+
        # Set libc and the library paths
        case "$archname" in
            PA-RISC*)
@@ -263,6 +263,16 @@ EOM
 
        case "$ccisgcc" in
            $define|true|[Yy])
+               # The fixed socket.h header file is wrong for gcc-4.x
+               # on PA-RISC2.0W, so Sock_type_t is size_t which is
+               # unsigned long which is 64bit which is too long
+               case "$gccversion" in
+                   4*) case "$archname" in
+                           PA-RISC*) socksizetype=int ;;
+                           esac
+                       ;;
+                   esac
+
                # For the moment, don't care that it ain't supported (yet)
                # by gcc (up to and including 2.95.3), cause it'll crash
                # anyway. Expect auto-detection of 64-bit enabled gcc on
@@ -279,14 +289,18 @@ EOM
                                        ldflags="$ldflags -mlp64"
                                        ;;
                                    esac
-                                   ;;
+                               ;;
                            esac
                        ;;
                    esac
                ;;
            *)
-               ccflags="$ccflags +DD64"
-               ldflags="$ldflags +DD64"
+               case "$use64bitall" in
+                   $define|true|[yY]*)
+                       ccflags="$ccflags +DD64"
+                       ldflags="$ldflags +DD64"
+                       ;;
+                   esac
                ;;
            esac
 
@@ -336,6 +350,7 @@ else
 
 ## Optimization limits
 cat >try.c <<EOF
+#include <stdio.h>
 #include <sys/resource.h>
 
 int main ()
@@ -361,6 +376,7 @@ to at least 0x08000000 (128 Mb) and rebuild your kernel.
 EOM
 regexec_cflags=''
 doop_cflags=''
+op_cflags=''
     fi
 
 case "$ccisgcc" in
@@ -398,7 +414,7 @@ case "$ccisgcc" in
            fi
        ;;
 
-    *) # HP's compiler cannot combine -g and -O
+    *)
        case "$optimize" in
            "")           optimize="+O2 +Onolimit" ;;
            *O[3456789]*) optimize=`echo "$optimize" | sed -e 's/O[3-9]/O2/'` ;;
@@ -420,7 +436,21 @@ case "$ccisgcc" in
                        # maint (5.8.8+) and blead (5.9.3+)
                        # -O1/+O1 passed all tests (m)'05 [ 10 Jan 2005 ]
                        optimize="$opt"                 ;;
-                   *)  doop_cflags="optimize=\"$opt\"" ;;
+                       B3910B*A.06.15)
+                       # > cc --version
+                       # cc: HP C/aC++ B3910B A.06.15 [May 16 2007]
+                       # Has optimizing problems with +O2 for blead (5.15.5),
+                       # see https://rt.perl.org:443/rt3/Ticket/Display.html?id=103668.
+                       #
+                       # +O2 +Onolimit +Onoprocelim  +Ostore_ordering \
+                       # +Onolibcalls=strcmp
+                       # passes all tests (with/without -DDEBUGGING) [Nov 17 2011]
+                       case "$optimize" in
+                               *O2*) optimize="$optimize +Onoprocelim +Ostore_ordering +Onolibcalls=strcmp" ;;
+                               esac
+                       ;;
+                   *)  doop_cflags="optimize=\"$opt\""
+                       op_cflags="optimize=\"$opt\""   ;;
                    esac
                ;;
            esac
@@ -627,7 +657,7 @@ Either you must upgrade to HP-UX 11 or install a posix thread library:
 
 or
 
-    PTH package from e.g. http://hpux.tn.tudelft.nl/hppd/hpux/alpha.html
+    PTH package from e.g. http://hpux.connect.org.uk/hppd/hpux/Gnu/pth-2.0.7/
 
 Cannot continue, aborting.
 EOM
@@ -639,8 +669,14 @@ EOM
            set `echo X "$libswanted "| sed -e 's/ c / pthread c /'`
            shift
            libswanted="$*"
-           fi
 
+           # HP-UX 11.X seems to have no easy
+           # way of detecting these *time_r protos.
+           d_gmtime_r_proto='define'
+           gmtime_r_proto='REENTRANT_PROTO_S_TS'
+           d_localtime_r_proto='define'
+           localtime_r_proto='REENTRANT_PROTO_S_TS'
+           fi
        ;;
     esac
 EOCBU
@@ -669,7 +705,6 @@ if [ $xxOsRevMajor -lt 11 ]; then
     d_asctime_r="$undef"
     fi
 
-
 # fpclassify () is a macro, the library call is Fpclassify
 # Similarly with the others below.
 d_fpclassify='define'