# $Id: Head.U,v 3.0.1.9 1997/02/28 15:02:09 ram Exp $
#
-# Generated on Thu Mar 2 21:01:10 CET 2006 [metaconfig 3.0 PL70]
+# Generated on Mon Apr 17 14:14:39 CEST 2006 [metaconfig 3.0 PL70]
# (with additional metaconfig patches by perlbug@perl.org)
cat >c1$$ <<EOF
baserev=''
bin=''
binexp=''
+initialinstalllocation=''
installbin=''
+userelocatableinc=''
byteorder=''
cc=''
ccflags=''
d_attribute_warn_unused_result=''
d_bcmp=''
d_bcopy=''
+d_builtin_choose_expr=''
+d_builtin_expect=''
d_bzero=''
d_casti32=''
castflags=''
i_varargs=''
i_varhdr=''
i_vfork=''
+d_inc_version_list=''
inc_version_list=''
inc_version_list_init=''
installprefix=''
sSCNfldbl=''
lseeksize=''
lseektype=''
+mad=''
+madlyh=''
+madlyobj=''
+madlysrc=''
make_set_make=''
d_mymalloc=''
freetype=''
sig_num=''
sig_num_init=''
sig_size=''
+d_sitearch=''
installsitearch=''
sitearch=''
sitearchexp=''
runnm=''
usenm=''
useperlio=''
-userelocatableinc=''
usesocks=''
d_oldpthreads=''
use5005threads=''
: no include file wanted by default
inclwanted=''
+: Enable -DEBUGGING and -DDEBUGGING from the command line
+EBUGGING=''
+DEBUGGING=old
+
groupstype=''
libnames=''
: change the next line if compiling for Xenix/286 on Xenix/386
esac ;;
esac
-: set up the script used to warn in case of inconsistency
-cat <<EOS >whoa
-$startsh
-EOS
-cat <<'EOSC' >>whoa
-dflt=y
-echo " "
-echo "*** WHOA THERE!!! ***" >&4
-echo " The $hint value for \$$var on this machine was \"$was\"!" >&4
-rp=" Keep the $hint value?"
-. ./myread
-case "$ans" in
-y) td=$was; tu=$was;;
-esac
-EOSC
-
-: function used to set $1 to $val
-setvar='var=$1; eval "was=\$$1"; td=$define; tu=$undef;
-case "$val$was" in
-$define$undef) . ./whoa; eval "$var=\$td";;
-$undef$define) . ./whoa; eval "$var=\$tu";;
-*) eval "$var=$val";;
-esac'
-
-case "$usesocks" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
-esac
-cat <<EOM
-
-Perl can be built to use the SOCKS proxy protocol library. To do so,
-Configure must be run with -Dusesocks. If you use SOCKS you also need
-to use the PerlIO abstraction layer, this will be implicitly selected.
-
-If this doesn't make any sense to you, just accept the default '$dflt'.
-EOM
-rp='Build Perl for SOCKS?'
-. ./myread
-case "$ans" in
-y|Y) val="$define" ;;
-*) val="$undef" ;;
+: decide how portable to be. Allow command line overrides.
+case "$d_portable" in
+"$undef") ;;
+*) d_portable="$define" ;;
esac
-set usesocks
-eval $setvar
-case "$usesocks" in
-$define|true|[yY]*) useperlio="$define";;
+: set up shell script to do ~ expansion
+cat >filexp <<EOSS
+$startsh
+: expand filename
+case "\$1" in
+ ~/*|~)
+ echo \$1 | $sed "s|~|\${HOME-\$LOGDIR}|"
+ ;;
+ ~*)
+ if $test -f /bin/csh; then
+ /bin/csh -f -c "glob \$1"
+ failed=\$?
+ echo ""
+ exit \$failed
+ else
+ name=\`$expr x\$1 : '..\([^/]*\)'\`
+ dir=\`$sed -n -e "/^\${name}:/{s/^[^:]*:[^:]*:[^:]*:[^:]*:[^:]*:\([^:]*\).*"'\$'"/\1/" -e p -e q -e '}' </etc/passwd\`
+ if $test ! -d "\$dir"; then
+ me=\`basename \$0\`
+ echo "\$me: can't locate home directory for: \$name" >&2
+ exit 1
+ fi
+ case "\$1" in
+ */*)
+ echo \$dir/\`$expr x\$1 : '..[^/]*/\(.*\)'\`
+ ;;
+ *)
+ echo \$dir
+ ;;
+ esac
+ fi
+ ;;
+*)
+ echo \$1
+ ;;
esac
+EOSS
+chmod +x filexp
+$eunicefix filexp
-case "$useperlio" in
-$define|true|[yY]*|'') dflt='y';;
-*) dflt='n';;
+: now set up to get a file name
+cat <<EOS >getfile
+$startsh
+EOS
+cat <<'EOSC' >>getfile
+tilde=''
+fullpath=''
+already=''
+skip=''
+none_ok=''
+exp_file=''
+nopath_ok=''
+orig_rp="$rp"
+orig_dflt="$dflt"
+case "$gfpth" in
+'') gfpth='.' ;;
esac
-cat <<EOM
-
-Previous version of $package used the standard IO mechanisms as
-defined in <stdio.h>. Versions 5.003_02 and later of $package allow
-alternate IO mechanisms via the PerlIO abstraction layer, but the
-stdio mechanism is still available if needed. The abstraction layer
-can use AT&T's sfio (if you already have sfio installed) or regular stdio.
-Using PerlIO with sfio may cause problems with some extension modules.
-If this doesn't make any sense to you, just accept the default '$dflt'.
-EOM
-rp='Use the PerlIO abstraction layer?'
-. ./myread
-case "$ans" in
-y|Y)
- val="$define"
- ;;
-*)
- echo "Ok, doing things the stdio way."
- val="$undef"
+case "$fn" in
+*\(*)
+ : getfile will accept an answer from the comma-separated list
+ : enclosed in parentheses even if it does not meet other criteria.
+ expr "$fn" : '.*(\(.*\)).*' | $tr ',' $trnl >getfile.ok
+ fn=`echo $fn | sed 's/(.*)//'`
;;
esac
-set useperlio
-eval $setvar
-
-case "$usesocks" in
-$define|true|[yY]*)
- case "$useperlio" in
- $define|true|[yY]*) ;;
- *) cat >&4 <<EOM
-
-You are using the SOCKS proxy protocol library which means that you
-should also use the PerlIO layer. You may be headed for trouble.
-EOM
- ;;
- esac
+case "$fn" in
+*:*)
+ loc_file=`expr $fn : '.*:\(.*\)'`
+ fn=`expr $fn : '\(.*\):.*'`
;;
esac
-
-case "$usethreads" in
-$define|true|[yY]*) dflt='y';;
-*) # Catch case where user specified ithreads or 5005threads but
- # forgot -Dusethreads (A.D. 4/2002)
- case "$useithreads$use5005threads" in
- *$define*)
- case "$useperlio" in
- "$define") dflt='y' ;;
- *) dflt='n' ;;
- esac
- ;;
- *) dflt='n';;
- esac
- ;;
+case "$fn" in
+*~*) tilde=true;;
esac
-cat <<EOM
-
-Perl can be built to take advantage of threads on some systems.
-To do so, Configure can be run with -Dusethreads.
-
-Note that Perl built with threading support runs slightly slower
-and uses more memory than plain Perl. The current implementation
-is believed to be stable, but it is fairly new, and so should be
-treated with caution.
-
-If this doesn't make any sense to you, just accept the default '$dflt'.
-EOM
-rp='Build a threading Perl?'
-. ./myread
-case "$ans" in
-y|Y) val="$define" ;;
-*) val="$undef" ;;
+case "$fn" in
+*/*) fullpath=true;;
+esac
+case "$fn" in
+*+*) skip=true;;
+esac
+case "$fn" in
+*n*) none_ok=true;;
+esac
+case "$fn" in
+*e*) exp_file=true;;
+esac
+case "$fn" in
+*p*) nopath_ok=true;;
esac
-set usethreads
-eval $setvar
-case "$usethreads" in
-$define)
- $cat <<EOM
+case "$fn" in
+*f*) type='File';;
+*d*) type='Directory';;
+*l*) type='Locate';;
+esac
-Since release 5.6, Perl has had two different threading implementations,
-the newer interpreter-based version (ithreads) with one interpreter per
-thread, and the older 5.005 version (5005threads).
-The 5005threads version is effectively unmaintained and will probably be
-removed in Perl 5.10, so there should be no need to build a Perl using it
-unless needed for backwards compatibility with some existing 5.005threads
-code.
+what="$type"
+case "$what" in
+Locate) what='File';;
+esac
-EOM
- : Default to ithreads unless overridden on command line or with
- : old config.sh
- dflt='y'
- case "$use5005threads" in
- $define|true|[yY]*) dflt='n';;
- esac
- case "$useithreads" in
- $undef|false|[nN]*) dflt='n';;
- esac
- rp='Use the newer interpreter-based ithreads?'
- . ./myread
- case "$ans" in
- y|Y) val="$define" ;;
- *) val="$undef" ;;
- esac
- set useithreads
- eval $setvar
- : Now set use5005threads to the opposite value.
- case "$useithreads" in
- $define) val="$undef" ;;
- *) val="$define" ;;
+case "$exp_file" in
+'')
+ case "$d_portable" in
+ "$define") ;;
+ *) exp_file=true;;
esac
- set use5005threads
- eval $setvar
- ;;
-*)
- useithreads="$undef"
- use5005threads="$undef"
;;
esac
-case "$useithreads$use5005threads" in
-"$define$define")
- $cat >&4 <<EOM
+cd ..
+while test "$type"; do
+ redo=''
+ rp="$orig_rp"
+ dflt="$orig_dflt"
+ case "$tilde" in
+ true) rp="$rp (~name ok)";;
+ esac
+ . UU/myread
+ if test -f UU/getfile.ok && \
+ $contains "^$ans\$" UU/getfile.ok >/dev/null 2>&1
+ then
+ value="$ans"
+ ansexp="$ans"
+ break
+ fi
+ case "$ans" in
+ none)
+ value=''
+ ansexp=''
+ case "$none_ok" in
+ true) type='';;
+ esac
+ ;;
+ *)
+ case "$tilde" in
+ '') value="$ans"
+ ansexp="$ans";;
+ *)
+ value=`UU/filexp $ans`
+ case $? in
+ 0)
+ if test "$ans" != "$value"; then
+ echo "(That expands to $value on this system.)"
+ fi
+ ;;
+ *) value="$ans";;
+ esac
+ ansexp="$value"
+ case "$exp_file" in
+ '') value="$ans";;
+ esac
+ ;;
+ esac
+ case "$fullpath" in
+ true)
+ case "$ansexp" in
+ /*) value="$ansexp" ;;
+ [a-zA-Z]:/*) value="$ansexp" ;;
+ *)
+ redo=true
+ case "$already" in
+ true)
+ echo "I shall only accept a full path name, as in /bin/ls." >&4
+ echo "Use a ! shell escape if you wish to check pathnames." >&4
+ ;;
+ *)
+ echo "Please give a full path name, starting with slash." >&4
+ case "$tilde" in
+ true)
+ echo "Note that using ~name is ok provided it expands well." >&4
+ already=true
+ ;;
+ esac
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ case "$redo" in
+ '')
+ case "$type" in
+ File)
+ for fp in $gfpth; do
+ if test "X$fp" = X.; then
+ pf="$ansexp"
+ else
+ pf="$fp/$ansexp"
+ fi
+ if test -f "$pf"; then
+ type=''
+ elif test -r "$pf" || (test -h "$pf") >/dev/null 2>&1
+ then
+ echo "($value is not a plain file, but that's ok.)"
+ type=''
+ fi
+ if test X"$type" = X; then
+ value="$pf"
+ break
+ fi
+ done
+ ;;
+ Directory)
+ for fp in $gfpth; do
+ if test "X$fp" = X.; then
+ dir="$ans"
+ direxp="$ansexp"
+ else
+ dir="$fp/$ansexp"
+ direxp="$fp/$ansexp"
+ fi
+ if test -d "$direxp"; then
+ type=''
+ value="$dir"
+ break
+ fi
+ done
+ ;;
+ Locate)
+ if test -d "$ansexp"; then
+ echo "(Looking for $loc_file in directory $value.)"
+ value="$value/$loc_file"
+ ansexp="$ansexp/$loc_file"
+ fi
+ if test -f "$ansexp"; then
+ type=''
+ fi
+ case "$nopath_ok" in
+ true) case "$value" in
+ */*) ;;
+ *) echo "Assuming $value will be in people's path."
+ type=''
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ esac
-You cannot have both the ithreads and the 5.005 threads enabled
-at the same time. Disabling the 5.005 threads since they are
-much less stable than the ithreads.
+ case "$skip" in
+ true) type='';
+ esac
-EOM
- use5005threads="$undef"
+ case "$type" in
+ '') ;;
+ *)
+ if test "$fastread" = yes; then
+ dflt=y
+ else
+ dflt=n
+ fi
+ rp="$what $value doesn't exist. Use that name anyway?"
+ . UU/myread
+ dflt=''
+ case "$ans" in
+ y*) type='';;
+ *) echo " ";;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+done
+cd UU
+ans="$value"
+rp="$orig_rp"
+dflt="$orig_dflt"
+rm -f getfile.ok
+test "X$gfpthkeep" != Xy && gfpth=""
+EOSC
+
+: determine root of directory hierarchy where package will be installed.
+case "$prefix" in
+'')
+ dflt=`./loc . /usr/local /usr/local /local /opt /usr`
+ ;;
+*?/)
+ dflt=`echo "$prefix" | sed 's/.$//'`
+ ;;
+*)
+ dflt="$prefix"
;;
esac
+$cat <<EOM
-if test X"$usethreads" = "X$define" -a "X$useperlio" = "Xundef"; then
- cat >&4 <<EOF
-***
-*** To build with ithreads you must also use the PerlIO layer.
-*** Cannot continue, aborting.
-***
-EOF
- exit 1
-fi
+By default, $package will be installed in $dflt/bin, manual pages
+under $dflt/man, etc..., i.e. with $dflt as prefix for all
+installation directories. Typically this is something like /usr/local.
+If you wish to have binaries under /usr/bin but other parts of the
+installation under /usr/local, that's ok: you will be prompted
+separately for each of the installation directories, the prefix being
+only used to set the defaults.
-case "$d_oldpthreads" in
-'') : Configure tests would be welcome here. For now, assume undef.
- val="$undef" ;;
-*) val="$d_oldpthreads" ;;
+EOM
+fn=d~
+rp='Installation prefix to use?'
+. ./getfile
+oldprefix=''
+case "$prefix" in
+'') ;;
+*)
+ case "$ans" in
+ "$prefix") ;;
+ *) oldprefix="$prefix";;
+ esac
+ ;;
esac
-set d_oldpthreads
-eval $setvar
+prefix="$ans"
+prefixexp="$ansexp"
+case "$afsroot" in
+'') afsroot=/afs ;;
+*) afsroot=$afsroot ;;
+esac
-: Look for a hint-file generated 'call-back-unit'. If the
-: user has specified that a threading perl is to be built,
-: we may need to set or change some other defaults.
-if $test -f usethreads.cbu; then
- echo "Your platform has some specific hints regarding threaded builds, using them..."
- . ./usethreads.cbu
-else
- case "$usethreads" in
- "$define"|true|[yY]*)
- $cat <<EOM
-(Your platform does not have any specific hints for threaded builds.
- Assuming POSIX threads, then.)
-EOM
+: is AFS running?
+echo " "
+case "$afs" in
+$define|true) afs=true ;;
+$undef|false) afs=false ;;
+*) if test -d $afsroot; then
+ afs=true
+ else
+ afs=false
+ fi
;;
- esac
+esac
+if $afs; then
+ echo "AFS may be running... I'll be extra cautious then..." >&4
+else
+ echo "AFS does not seem to be running..." >&4
fi
-cat <<EOM
-
-Perl can be built so that multiple Perl interpreters can coexist
-within the same Perl executable.
-EOM
+: determine installation prefix for where package is to be installed.
+if $afs; then
+$cat <<EOM
+
+Since you are running AFS, I need to distinguish the directory in which
+files will reside from the directory in which they are installed (and from
+which they are presumably copied to the former directory by occult means).
-case "$useithreads" in
-$define)
- cat <<EOM
-This multiple interpreter support is required for interpreter-based threads.
EOM
- val="$define"
- ;;
-*) case "$usemultiplicity" in
- $define|true|[yY]*) dflt='y';;
- *) dflt='n';;
+ case "$installprefix" in
+ '') dflt=`echo $prefix | sed 's#^/afs/#/afs/.#'`;;
+ *) dflt="$installprefix";;
esac
- echo " "
- echo "If this doesn't make any sense to you, just accept the default '$dflt'."
- rp='Build Perl for multiplicity?'
- . ./myread
- case "$ans" in
- y|Y) val="$define" ;;
- *) val="$undef" ;;
+else
+$cat <<EOM
+
+In some special cases, particularly when building $package for distribution,
+it is convenient to distinguish the directory in which files should be
+installed from the directory ($prefix) in which they will
+eventually reside. For most users, these two directories are the same.
+
+EOM
+ case "$installprefix" in
+ '') dflt=$prefix ;;
+ *) dflt=$installprefix;;
esac
- ;;
+fi
+fn=d~
+rp='What installation prefix should I use for installing files?'
+. ./getfile
+installprefix="$ans"
+installprefixexp="$ansexp"
+
+: Perform the prefixexp/installprefixexp correction if necessary
+cat <<EOS >installprefix
+$startsh
+EOS
+cat <<'EOSC' >>installprefix
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ eval "install${prefixvar}=\`echo \$${prefixvar}exp | sed \"s#^\$prefixexp#\$installprefixexp#\"\`"
+else
+ eval "install${prefixvar}=\"\$${prefixvar}exp\""
+fi
+EOSC
+chmod +x installprefix
+$eunicefix installprefix
+
+: Set variables such as privlib and privlibexp from the output of ./getfile
+: performing the prefixexp/installprefixexp correction if necessary.
+cat <<EOS >setprefixvar
+$startsh
+EOS
+cat <<'EOSC' >>setprefixvar
+eval "${prefixvar}=\"\$ans\""
+eval "${prefixvar}exp=\"\$ansexp\""
+. ./installprefix
+EOSC
+chmod +x setprefixvar
+$eunicefix setprefixvar
+
+: set up the script used to warn in case of inconsistency
+cat <<EOS >whoa
+$startsh
+EOS
+cat <<'EOSC' >>whoa
+dflt=y
+echo " "
+echo "*** WHOA THERE!!! ***" >&4
+echo " The $hint value for \$$var on this machine was \"$was\"!" >&4
+rp=" Keep the $hint value?"
+. ./myread
+case "$ans" in
+y) td=$was; tu=$was;;
esac
-set usemultiplicity
+EOSC
+
+: function used to set $1 to $val
+setvar='var=$1; eval "was=\$$1"; td=$define; tu=$undef;
+case "$val$was" in
+$define$undef) . ./whoa; eval "$var=\$td";;
+$undef$define) . ./whoa; eval "$var=\$tu";;
+*) eval "$var=$val";;
+esac'
+
+case "$usesocks" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
+cat <<EOM
+
+Perl can be built to use the SOCKS proxy protocol library. To do so,
+Configure must be run with -Dusesocks. If you use SOCKS you also need
+to use the PerlIO abstraction layer, this will be implicitly selected.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+rp='Build Perl for SOCKS?'
+. ./myread
+case "$ans" in
+y|Y) val="$define" ;;
+*) val="$undef" ;;
+esac
+set usesocks
eval $setvar
+case "$usesocks" in
+$define|true|[yY]*) useperlio="$define";;
+esac
-case "$usemorebits" in
-"$define"|true|[yY]*)
- use64bitint="$define"
- uselongdouble="$define"
- usemorebits="$define"
- ;;
-*) usemorebits="$undef"
- ;;
+case "$useperlio" in
+$define|true|[yY]*|'') dflt='y';;
+*) dflt='n';;
esac
+cat <<EOM
-: make some quick guesses about what we are up against
-echo " "
-$echo $n "Hmm... $c"
-echo exit 1 >bsd
-echo exit 1 >usg
-echo exit 1 >v7
-echo exit 1 >osf1
-echo exit 1 >eunice
-echo exit 1 >xenix
-echo exit 1 >venix
-echo exit 1 >os2
-d_bsd="$undef"
-$cat /usr/include/signal.h /usr/include/sys/signal.h >foo 2>/dev/null
-if test -f /osf_boot || $contains 'OSF/1' /usr/include/ctype.h >/dev/null 2>&1
-then
- echo "Looks kind of like an OSF/1 system, but we'll see..."
- echo exit 0 >osf1
-elif test `echo abc | $tr a-z A-Z` = Abc ; then
- xxx=`./loc addbib blurfl $pth`
- if $test -f $xxx; then
- echo "Looks kind of like a USG system with BSD features, but we'll see..."
- echo exit 0 >bsd
- echo exit 0 >usg
- else
- if $contains SIGTSTP foo >/dev/null 2>&1 ; then
- echo "Looks kind of like an extended USG system, but we'll see..."
- else
- echo "Looks kind of like a USG system, but we'll see..."
- fi
- echo exit 0 >usg
- fi
-elif $contains SIGTSTP foo >/dev/null 2>&1 ; then
- echo "Looks kind of like a BSD system, but we'll see..."
- d_bsd="$define"
- echo exit 0 >bsd
-else
- echo "Looks kind of like a Version 7 system, but we'll see..."
- echo exit 0 >v7
-fi
-case "$eunicefix" in
-*unixtovms*)
- $cat <<'EOI'
-There is, however, a strange, musty smell in the air that reminds me of
-something...hmm...yes...I've got it...there's a VMS nearby, or I'm a Blit.
-EOI
- echo exit 0 >eunice
- d_eunice="$define"
-: it so happens the Eunice I know will not run shell scripts in Unix format
+Previous version of $package used the standard IO mechanisms as
+defined in <stdio.h>. Versions 5.003_02 and later of $package allow
+alternate IO mechanisms via the PerlIO abstraction layer, but the
+stdio mechanism is still available if needed. The abstraction layer
+can use AT&T's sfio (if you already have sfio installed) or regular stdio.
+Using PerlIO with sfio may cause problems with some extension modules.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+rp='Use the PerlIO abstraction layer?'
+. ./myread
+case "$ans" in
+y|Y)
+ val="$define"
;;
-*)
- echo " "
- echo "Congratulations. You aren't running Eunice."
- d_eunice="$undef"
+*)
+ echo "Ok, doing things the stdio way."
+ val="$undef"
;;
esac
-: Detect OS2. The p_ variable is set above in the Head.U unit.
-: Note that this also -- wrongly -- detects e.g. dos-djgpp, which also uses
-: semicolon as a patch separator
-case "$p_" in
-:) ;;
-*)
- $cat <<'EOI'
-I have the feeling something is not exactly right, however...don't tell me...
-lemme think...does HAL ring a bell?...no, of course, you're only running OS/2!
-(Or you may be running DOS with DJGPP.)
-EOI
- echo exit 0 >os2
+set useperlio
+eval $setvar
+
+case "$usesocks" in
+$define|true|[yY]*)
+ case "$useperlio" in
+ $define|true|[yY]*) ;;
+ *) cat >&4 <<EOM
+
+You are using the SOCKS proxy protocol library which means that you
+should also use the PerlIO layer. You may be headed for trouble.
+
+EOM
+ ;;
+ esac
;;
esac
-if test -f /xenix; then
- echo "Actually, this looks more like a XENIX system..."
- echo exit 0 >xenix
- d_xenix="$define"
-else
- echo " "
- echo "It's not Xenix..."
- d_xenix="$undef"
-fi
-chmod +x xenix
-$eunicefix xenix
-if test -f /venix; then
- echo "Actually, this looks more like a VENIX system..."
- echo exit 0 >venix
-else
- echo " "
- if ./xenix; then
- : null
- else
- echo "Nor is it Venix..."
- fi
-fi
-chmod +x bsd usg v7 osf1 eunice xenix venix os2
-$eunicefix bsd usg v7 osf1 eunice xenix venix os2
-$rm -f foo
-case "$cc" in
-'') dflt=cc;;
-*) dflt="$cc";;
+
+case "$usethreads" in
+$define|true|[yY]*) dflt='y';;
+*) # Catch case where user specified ithreads or 5005threads but
+ # forgot -Dusethreads (A.D. 4/2002)
+ case "$useithreads$use5005threads" in
+ *$define*)
+ case "$useperlio" in
+ "$define") dflt='y' ;;
+ *) dflt='n' ;;
+ esac
+ ;;
+ *) dflt='n';;
+ esac
+ ;;
esac
-rp="Use which C compiler?"
-. ./myread
-cc="$ans"
+cat <<EOM
-: See if they have not cc but they do have gcc
-. ./trygcc
-: Look for a hint-file generated 'call-back-unit'. Now that the
-: user has specified the compiler, we may need to set or change some
-: other defaults.
-if $test -f cc.cbu; then
- . ./cc.cbu
-fi
-. ./checkcc
-
-echo " "
-echo "Checking for GNU cc in disguise and/or its version number..." >&4
-$cat >try.c <<EOM
-#include <stdio.h>
-int main() {
-#ifdef __GNUC__
-#ifdef __VERSION__
- printf("%s\n", __VERSION__);
-#else
- printf("%s\n", "1");
-#endif
-#endif
- return(0);
-}
-EOM
-if $cc -o try $ccflags $ldflags try.c; then
- gccversion=`$run ./try`
- case "$gccversion" in
- '') echo "You are not using GNU cc." ;;
- *) echo "You are using GNU cc $gccversion."
- ccname=gcc
- ;;
- esac
-else
- echo " "
- echo "*** WHOA THERE!!! ***" >&4
- echo " Your C compiler \"$cc\" doesn't seem to be working!" >&4
- case "$knowitall" in
- '')
- echo " You'd better start hunting for one and let me know about it." >&4
- exit 1
- ;;
- esac
-fi
-$rm -f try try.*
-case "$gccversion" in
-1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-esac
-case "$gccversion" in
-'') gccosandvers='' ;;
-*) gccshortvers=`echo "$gccversion"|sed 's/ .*//'`
- gccosandvers=`$cc -v 2>&1|grep '/specs$'|sed "s!.*/[^-/]*-[^-/]*-\([^-/]*\)/$gccshortvers/specs!\1!"`
- gccshortvers=''
- case "$gccosandvers" in
- $osname) gccosandvers='' ;; # linux gccs seem to have no linux osvers, grr
- $osname$osvers) ;; # looking good
- $osname*) cat <<EOM >&4
-
-*** WHOA THERE!!! ***
-
- Your gcc has not been compiled for the exact release of
- your operating system ($gccosandvers versus $osname$osvers).
-
- In general it is a good idea to keep gcc synchronized with
- the operating system because otherwise serious problems
- may ensue when trying to compile software, like Perl.
+Perl can be built to take advantage of threads on some systems.
+To do so, Configure can be run with -Dusethreads.
- I'm trying to be optimistic here, though, and will continue.
- If later during the configuration and build icky compilation
- problems appear (headerfile conflicts being the most common
- manifestation), I suggest reinstalling the gcc to match
- your operating system release.
+Note that Perl built with threading support runs slightly slower
+and uses more memory than plain Perl. The current implementation
+is believed to be stable, but it is fairly new, and so should be
+treated with caution.
+If this doesn't make any sense to you, just accept the default '$dflt'.
EOM
- ;;
- *) gccosandvers='' ;; # failed to parse, better be silent
- esac
- ;;
-esac
-case "$ccname" in
-'') ccname="$cc" ;;
+rp='Build a threading Perl?'
+. ./myread
+case "$ans" in
+y|Y) val="$define" ;;
+*) val="$undef" ;;
esac
+set usethreads
+eval $setvar
-# gcc 3.* complain about adding -Idirectories that they already know about,
-# so we will take those off from locincpth.
-case "$gccversion" in
-3*)
- echo "main(){}">try.c
- for incdir in $locincpth; do
- warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
- grep '^c[cp]p*[01]: warning: changing search order '`
- if test "X$warn" != X; then
- locincpth=`echo " $locincpth " | sed "s! $incdir ! !"`
- fi
- done
- $rm -f try try.*
-esac
+case "$usethreads" in
+$define)
+ $cat <<EOM
-: decide how portable to be. Allow command line overrides.
-case "$d_portable" in
-"$undef") ;;
-*) d_portable="$define" ;;
-esac
+Since release 5.6, Perl has had two different threading implementations,
+the newer interpreter-based version (ithreads) with one interpreter per
+thread, and the older 5.005 version (5005threads).
+The 5005threads version is effectively unmaintained and will probably be
+removed in Perl 5.10, so there should be no need to build a Perl using it
+unless needed for backwards compatibility with some existing 5.005threads
+code.
-: set up shell script to do ~ expansion
-cat >filexp <<EOSS
-$startsh
-: expand filename
-case "\$1" in
- ~/*|~)
- echo \$1 | $sed "s|~|\${HOME-\$LOGDIR}|"
- ;;
- ~*)
- if $test -f /bin/csh; then
- /bin/csh -f -c "glob \$1"
- failed=\$?
- echo ""
- exit \$failed
- else
- name=\`$expr x\$1 : '..\([^/]*\)'\`
- dir=\`$sed -n -e "/^\${name}:/{s/^[^:]*:[^:]*:[^:]*:[^:]*:[^:]*:\([^:]*\).*"'\$'"/\1/" -e p -e q -e '}' </etc/passwd\`
- if $test ! -d "\$dir"; then
- me=\`basename \$0\`
- echo "\$me: can't locate home directory for: \$name" >&2
- exit 1
- fi
- case "\$1" in
- */*)
- echo \$dir/\`$expr x\$1 : '..[^/]*/\(.*\)'\`
- ;;
- *)
- echo \$dir
- ;;
- esac
- fi
+EOM
+ : Default to ithreads unless overridden on command line or with
+ : old config.sh
+ dflt='y'
+ case "$use5005threads" in
+ $define|true|[yY]*) dflt='n';;
+ esac
+ case "$useithreads" in
+ $undef|false|[nN]*) dflt='n';;
+ esac
+ rp='Use the newer interpreter-based ithreads?'
+ . ./myread
+ case "$ans" in
+ y|Y) val="$define" ;;
+ *) val="$undef" ;;
+ esac
+ set useithreads
+ eval $setvar
+ : Now set use5005threads to the opposite value.
+ case "$useithreads" in
+ $define) val="$undef" ;;
+ *) val="$define" ;;
+ esac
+ set use5005threads
+ eval $setvar
;;
*)
- echo \$1
+ useithreads="$undef"
+ use5005threads="$undef"
;;
esac
-EOSS
-chmod +x filexp
-$eunicefix filexp
-: now set up to get a file name
-cat <<EOS >getfile
-$startsh
-EOS
-cat <<'EOSC' >>getfile
-tilde=''
-fullpath=''
-already=''
-skip=''
-none_ok=''
-exp_file=''
-nopath_ok=''
-orig_rp="$rp"
-orig_dflt="$dflt"
-case "$gfpth" in
-'') gfpth='.' ;;
-esac
+case "$useithreads$use5005threads" in
+"$define$define")
+ $cat >&4 <<EOM
-case "$fn" in
-*\(*)
- : getfile will accept an answer from the comma-separated list
- : enclosed in parentheses even if it does not meet other criteria.
- expr "$fn" : '.*(\(.*\)).*' | $tr ',' $trnl >getfile.ok
- fn=`echo $fn | sed 's/(.*)//'`
- ;;
-esac
+You cannot have both the ithreads and the 5.005 threads enabled
+at the same time. Disabling the 5.005 threads since they are
+much less stable than the ithreads.
-case "$fn" in
-*:*)
- loc_file=`expr $fn : '.*:\(.*\)'`
- fn=`expr $fn : '\(.*\):.*'`
+EOM
+ use5005threads="$undef"
;;
esac
-case "$fn" in
-*~*) tilde=true;;
-esac
-case "$fn" in
-*/*) fullpath=true;;
-esac
-case "$fn" in
-*+*) skip=true;;
-esac
-case "$fn" in
-*n*) none_ok=true;;
-esac
-case "$fn" in
-*e*) exp_file=true;;
-esac
-case "$fn" in
-*p*) nopath_ok=true;;
-esac
+if test X"$usethreads" = "X$define" -a "X$useperlio" = "Xundef"; then
+ cat >&4 <<EOF
+***
+*** To build with ithreads you must also use the PerlIO layer.
+*** Cannot continue, aborting.
+***
+EOF
+ exit 1
+fi
-case "$fn" in
-*f*) type='File';;
-*d*) type='Directory';;
-*l*) type='Locate';;
-esac
-
-what="$type"
-case "$what" in
-Locate) what='File';;
+case "$d_oldpthreads" in
+'') : Configure tests would be welcome here. For now, assume undef.
+ val="$undef" ;;
+*) val="$d_oldpthreads" ;;
esac
+set d_oldpthreads
+eval $setvar
-case "$exp_file" in
-'')
- case "$d_portable" in
- "$define") ;;
- *) exp_file=true;;
+
+: Look for a hint-file generated 'call-back-unit'. If the
+: user has specified that a threading perl is to be built,
+: we may need to set or change some other defaults.
+if $test -f usethreads.cbu; then
+ echo "Your platform has some specific hints regarding threaded builds, using them..."
+ . ./usethreads.cbu
+else
+ case "$usethreads" in
+ "$define"|true|[yY]*)
+ $cat <<EOM
+(Your platform does not have any specific hints for threaded builds.
+ Assuming POSIX threads, then.)
+EOM
+ ;;
+ esac
+fi
+
+cat <<EOM
+
+Perl can be built so that multiple Perl interpreters can coexist
+within the same Perl executable.
+EOM
+
+case "$useithreads" in
+$define)
+ cat <<EOM
+This multiple interpreter support is required for interpreter-based threads.
+EOM
+ val="$define"
+ ;;
+*) case "$usemultiplicity" in
+ $define|true|[yY]*) dflt='y';;
+ *) dflt='n';;
+ esac
+ echo " "
+ echo "If this doesn't make any sense to you, just accept the default '$dflt'."
+ rp='Build Perl for multiplicity?'
+ . ./myread
+ case "$ans" in
+ y|Y) val="$define" ;;
+ *) val="$undef" ;;
esac
;;
esac
+set usemultiplicity
+eval $setvar
-cd ..
-while test "$type"; do
- redo=''
- rp="$orig_rp"
- dflt="$orig_dflt"
- case "$tilde" in
- true) rp="$rp (~name ok)";;
- esac
- . UU/myread
- if test -f UU/getfile.ok && \
- $contains "^$ans\$" UU/getfile.ok >/dev/null 2>&1
- then
- value="$ans"
- ansexp="$ans"
- break
+
+case "$usemorebits" in
+"$define"|true|[yY]*)
+ use64bitint="$define"
+ uselongdouble="$define"
+ usemorebits="$define"
+ ;;
+*) usemorebits="$undef"
+ ;;
+esac
+
+: make some quick guesses about what we are up against
+echo " "
+$echo $n "Hmm... $c"
+echo exit 1 >bsd
+echo exit 1 >usg
+echo exit 1 >v7
+echo exit 1 >osf1
+echo exit 1 >eunice
+echo exit 1 >xenix
+echo exit 1 >venix
+echo exit 1 >os2
+d_bsd="$undef"
+$cat /usr/include/signal.h /usr/include/sys/signal.h >foo 2>/dev/null
+if test -f /osf_boot || $contains 'OSF/1' /usr/include/ctype.h >/dev/null 2>&1
+then
+ echo "Looks kind of like an OSF/1 system, but we'll see..."
+ echo exit 0 >osf1
+elif test `echo abc | $tr a-z A-Z` = Abc ; then
+ xxx=`./loc addbib blurfl $pth`
+ if $test -f $xxx; then
+ echo "Looks kind of like a USG system with BSD features, but we'll see..."
+ echo exit 0 >bsd
+ echo exit 0 >usg
+ else
+ if $contains SIGTSTP foo >/dev/null 2>&1 ; then
+ echo "Looks kind of like an extended USG system, but we'll see..."
+ else
+ echo "Looks kind of like a USG system, but we'll see..."
+ fi
+ echo exit 0 >usg
fi
- case "$ans" in
- none)
- value=''
- ansexp=''
- case "$none_ok" in
- true) type='';;
- esac
- ;;
- *)
- case "$tilde" in
- '') value="$ans"
- ansexp="$ans";;
- *)
- value=`UU/filexp $ans`
- case $? in
- 0)
- if test "$ans" != "$value"; then
- echo "(That expands to $value on this system.)"
- fi
- ;;
- *) value="$ans";;
- esac
- ansexp="$value"
- case "$exp_file" in
- '') value="$ans";;
- esac
- ;;
- esac
- case "$fullpath" in
- true)
- case "$ansexp" in
- /*) value="$ansexp" ;;
- [a-zA-Z]:/*) value="$ansexp" ;;
- *)
- redo=true
- case "$already" in
- true)
- echo "I shall only accept a full path name, as in /bin/ls." >&4
- echo "Use a ! shell escape if you wish to check pathnames." >&4
- ;;
- *)
- echo "Please give a full path name, starting with slash." >&4
- case "$tilde" in
- true)
- echo "Note that using ~name is ok provided it expands well." >&4
- already=true
- ;;
- esac
- esac
- ;;
- esac
- ;;
- esac
- case "$redo" in
- '')
- case "$type" in
- File)
- for fp in $gfpth; do
- if test "X$fp" = X.; then
- pf="$ansexp"
- else
- pf="$fp/$ansexp"
- fi
- if test -f "$pf"; then
- type=''
- elif test -r "$pf" || (test -h "$pf") >/dev/null 2>&1
- then
- echo "($value is not a plain file, but that's ok.)"
- type=''
- fi
- if test X"$type" = X; then
- value="$pf"
- break
- fi
- done
- ;;
- Directory)
- for fp in $gfpth; do
- if test "X$fp" = X.; then
- dir="$ans"
- direxp="$ansexp"
- else
- dir="$fp/$ansexp"
- direxp="$fp/$ansexp"
- fi
- if test -d "$direxp"; then
- type=''
- value="$dir"
- break
- fi
- done
- ;;
- Locate)
- if test -d "$ansexp"; then
- echo "(Looking for $loc_file in directory $value.)"
- value="$value/$loc_file"
- ansexp="$ansexp/$loc_file"
- fi
- if test -f "$ansexp"; then
- type=''
- fi
- case "$nopath_ok" in
- true) case "$value" in
- */*) ;;
- *) echo "Assuming $value will be in people's path."
- type=''
- ;;
- esac
- ;;
- esac
- ;;
- esac
+elif $contains SIGTSTP foo >/dev/null 2>&1 ; then
+ echo "Looks kind of like a BSD system, but we'll see..."
+ d_bsd="$define"
+ echo exit 0 >bsd
+else
+ echo "Looks kind of like a Version 7 system, but we'll see..."
+ echo exit 0 >v7
+fi
+case "$eunicefix" in
+*unixtovms*)
+ $cat <<'EOI'
+There is, however, a strange, musty smell in the air that reminds me of
+something...hmm...yes...I've got it...there's a VMS nearby, or I'm a Blit.
+EOI
+ echo exit 0 >eunice
+ d_eunice="$define"
+: it so happens the Eunice I know will not run shell scripts in Unix format
+ ;;
+*)
+ echo " "
+ echo "Congratulations. You aren't running Eunice."
+ d_eunice="$undef"
+ ;;
+esac
+: Detect OS2. The p_ variable is set above in the Head.U unit.
+: Note that this also -- wrongly -- detects e.g. dos-djgpp, which also uses
+: semicolon as a patch separator
+case "$p_" in
+:) ;;
+*)
+ $cat <<'EOI'
+I have the feeling something is not exactly right, however...don't tell me...
+lemme think...does HAL ring a bell?...no, of course, you're only running OS/2!
+(Or you may be running DOS with DJGPP.)
+EOI
+ echo exit 0 >os2
+ ;;
+esac
+if test -f /xenix; then
+ echo "Actually, this looks more like a XENIX system..."
+ echo exit 0 >xenix
+ d_xenix="$define"
+else
+ echo " "
+ echo "It's not Xenix..."
+ d_xenix="$undef"
+fi
+chmod +x xenix
+$eunicefix xenix
+if test -f /venix; then
+ echo "Actually, this looks more like a VENIX system..."
+ echo exit 0 >venix
+else
+ echo " "
+ if ./xenix; then
+ : null
+ else
+ echo "Nor is it Venix..."
+ fi
+fi
+chmod +x bsd usg v7 osf1 eunice xenix venix os2
+$eunicefix bsd usg v7 osf1 eunice xenix venix os2
+$rm -f foo
- case "$skip" in
- true) type='';
- esac
+case "$cc" in
+'') dflt=cc;;
+*) dflt="$cc";;
+esac
+rp="Use which C compiler?"
+. ./myread
+cc="$ans"
- case "$type" in
- '') ;;
- *)
- if test "$fastread" = yes; then
- dflt=y
- else
- dflt=n
- fi
- rp="$what $value doesn't exist. Use that name anyway?"
- . UU/myread
- dflt=''
- case "$ans" in
- y*) type='';;
- *) echo " ";;
- esac
- ;;
- esac
- ;;
- esac
+: See if they have not cc but they do have gcc
+. ./trygcc
+: Look for a hint-file generated 'call-back-unit'. Now that the
+: user has specified the compiler, we may need to set or change some
+: other defaults.
+if $test -f cc.cbu; then
+ . ./cc.cbu
+fi
+. ./checkcc
+
+echo " "
+echo "Checking for GNU cc in disguise and/or its version number..." >&4
+$cat >try.c <<EOM
+#include <stdio.h>
+int main() {
+#ifdef __GNUC__
+#ifdef __VERSION__
+ printf("%s\n", __VERSION__);
+#else
+ printf("%s\n", "1");
+#endif
+#endif
+ return(0);
+}
+EOM
+if $cc -o try $ccflags $ldflags try.c; then
+ gccversion=`$run ./try`
+ case "$gccversion" in
+ '') echo "You are not using GNU cc." ;;
+ *) echo "You are using GNU cc $gccversion."
+ ccname=gcc
+ ;;
+ esac
+else
+ echo " "
+ echo "*** WHOA THERE!!! ***" >&4
+ echo " Your C compiler \"$cc\" doesn't seem to be working!" >&4
+ case "$knowitall" in
+ '')
+ echo " You'd better start hunting for one and let me know about it." >&4
+ exit 1
;;
esac
-done
-cd UU
-ans="$value"
-rp="$orig_rp"
-dflt="$orig_dflt"
-rm -f getfile.ok
-test "X$gfpthkeep" != Xy && gfpth=""
-EOSC
+fi
+$rm -f try try.*
+case "$gccversion" in
+1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
+esac
+case "$gccversion" in
+'') gccosandvers='' ;;
+*) gccshortvers=`echo "$gccversion"|sed 's/ .*//'`
+ gccosandvers=`$cc -v 2>&1|grep '/specs$'|sed "s!.*/[^-/]*-[^-/]*-\([^-/]*\)/$gccshortvers/specs!\1!"`
+ gccshortvers=''
+ case "$gccosandvers" in
+ $osname) gccosandvers='' ;; # linux gccs seem to have no linux osvers, grr
+ $osname$osvers) ;; # looking good
+ $osname*) cat <<EOM >&4
+
+*** WHOA THERE!!! ***
+
+ Your gcc has not been compiled for the exact release of
+ your operating system ($gccosandvers versus $osname$osvers).
+
+ In general it is a good idea to keep gcc synchronized with
+ the operating system because otherwise serious problems
+ may ensue when trying to compile software, like Perl.
+
+ I'm trying to be optimistic here, though, and will continue.
+ If later during the configuration and build icky compilation
+ problems appear (headerfile conflicts being the most common
+ manifestation), I suggest reinstalling the gcc to match
+ your operating system release.
+
+EOM
+ ;;
+ *) gccosandvers='' ;; # failed to parse, better be silent
+ esac
+ ;;
+esac
+case "$ccname" in
+'') ccname="$cc" ;;
+esac
+
+# gcc 3.* complain about adding -Idirectories that they already know about,
+# so we will take those off from locincpth.
+case "$gccversion" in
+3*)
+ echo "main(){}">try.c
+ for incdir in $locincpth; do
+ warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
+ grep '^c[cp]p*[01]: warning: changing search order '`
+ if test "X$warn" != X; then
+ locincpth=`echo " $locincpth " | sed "s! $incdir ! !"`
+ fi
+ done
+ $rm -f try try.*
+esac
: What should the include directory be ?
echo " "
'none') optimize=" ";;
esac
+: Check what DEBUGGING is required from the command line
+: -DEBUGGING or -DDEBUGGING or
+: -DEBUGGING=both = -g + -DDEBUGGING
+: -DEBUGGING=-g or -Doptimize=-g = -g
+: -DEBUGGING=none or -UDEBUGGING =
+: -DEBUGGING=old or -DEBUGGING=default = ? $optimize
+case "$EBUGGING" in
+'') ;;
+*) DEBUGGING=$EBUGGING ;;
+esac
+
+case "$DEBUGGING" in
+-g|$define)
+ case "$optimize" in
+ *-g*) ;;
+ *) optimize="$optimize -g" ;;
+ esac ;;
+none|$undef)
+ case "$optimize" in
+ *-g*) set `echo "X $optimize " | sed 's/ -g / /'`
+ shift
+ optimize="$*"
+ ;;
+ esac ;;
+esac
+
dflt=''
+case "$DEBUGGING" in
+both|$define) dflt='-DDEBUGGING'
+esac
+
: We will not override a previous value, but we might want to
: augment a hint file
case "$hint" in
default|recommended)
case "$gccversion" in
- 1*) dflt='-fpcc-struct-return' ;;
+ 1*) dflt="$dflt -fpcc-struct-return" ;;
esac
- case "$optimize" in
- *-g*) dflt="$dflt -DDEBUGGING";;
+ case "$optimize:$DEBUGGING" in
+ *-g*:old) dflt="$dflt -DDEBUGGING";;
esac
case "$gccversion" in
2*) if test -d /etc/conf/kconfig.d &&
$define)
echo "Perlio selected." >&4
;;
-*)
- echo "Perlio not selected, using stdio." >&4
- case "$archname" in
- *-stdio*) echo "...and architecture name already has -stdio." >&4
- ;;
- *) archname="$archname-stdio"
- echo "...setting architecture name to $archname." >&4
- ;;
- esac
- ;;
-esac
-if $test -f archname.cbu; then
- echo "Your platform has some specific hints for architecture name, using them..."
- . ./archname.cbu
-fi
-
-: determine root of directory hierarchy where package will be installed.
-case "$prefix" in
-'')
- dflt=`./loc . /usr/local /usr/local /local /opt /usr`
- ;;
-*?/)
- dflt=`echo "$prefix" | sed 's/.$//'`
- ;;
-*)
- dflt="$prefix"
- ;;
-esac
-$cat <<EOM
-
-By default, $package will be installed in $dflt/bin, manual pages
-under $dflt/man, etc..., i.e. with $dflt as prefix for all
-installation directories. Typically this is something like /usr/local.
-If you wish to have binaries under /usr/bin but other parts of the
-installation under /usr/local, that's ok: you will be prompted
-separately for each of the installation directories, the prefix being
-only used to set the defaults.
-
-EOM
-fn=d~
-rp='Installation prefix to use?'
-. ./getfile
-oldprefix=''
-case "$prefix" in
-'') ;;
-*)
- case "$ans" in
- "$prefix") ;;
- *) oldprefix="$prefix";;
- esac
- ;;
-esac
-prefix="$ans"
-prefixexp="$ansexp"
-
-case "$afsroot" in
-'') afsroot=/afs ;;
-*) afsroot=$afsroot ;;
-esac
-
-: is AFS running?
-echo " "
-case "$afs" in
-$define|true) afs=true ;;
-$undef|false) afs=false ;;
-*) if test -d $afsroot; then
- afs=true
- else
- afs=false
- fi
- ;;
-esac
-if $afs; then
- echo "AFS may be running... I'll be extra cautious then..." >&4
-else
- echo "AFS does not seem to be running..." >&4
-fi
-
-: determine installation prefix for where package is to be installed.
-if $afs; then
-$cat <<EOM
-
-Since you are running AFS, I need to distinguish the directory in which
-files will reside from the directory in which they are installed (and from
-which they are presumably copied to the former directory by occult means).
-
-EOM
- case "$installprefix" in
- '') dflt=`echo $prefix | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installprefix";;
- esac
-else
-$cat <<EOM
-
-In some special cases, particularly when building $package for distribution,
-it is convenient to distinguish the directory in which files should be
-installed from the directory ($prefix) in which they will
-eventually reside. For most users, these two directories are the same.
-
-EOM
- case "$installprefix" in
- '') dflt=$prefix ;;
- *) dflt=$installprefix;;
- esac
+*)
+ echo "Perlio not selected, using stdio." >&4
+ case "$archname" in
+ *-stdio*) echo "...and architecture name already has -stdio." >&4
+ ;;
+ *) archname="$archname-stdio"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
+ ;;
+esac
+if $test -f archname.cbu; then
+ echo "Your platform has some specific hints for architecture name, using them..."
+ . ./archname.cbu
fi
-fn=d~
-rp='What installation prefix should I use for installing files?'
-. ./getfile
-installprefix="$ans"
-installprefixexp="$ansexp"
: set the prefixit variable, to compute a suitable default value
prefixit='case "$3" in
: confusing anyway.
installstyle=$dflt
+: determine where public executables go
+echo " "
+set dflt bin bin
+eval $prefixit
+fn=d~
+rp='Pathname where the public executables will reside?'
+. ./getfile
+if $test "X$ansexp" != "X$binexp"; then
+ installbin=''
+fi
+prefixvar=bin
+: XXX Bug? -- ignores Configure -Dinstallprefix setting.
+. ./setprefixvar
+
+case "$userelocatableinc" in
+$define|true|[yY]*) dflt='y' ;;
+*) dflt='n' ;;
+esac
+cat <<EOM
+
+Would you like to build Perl so that the installation is relocatable, so that
+library paths in @INC are determined relative to the path of the perl binary?
+This is not advised for system Perl installs, or if you need to run setid
+scripts or scripts under taint mode.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+rp='Use relocatable @INC?'
+. ./myread
+case "$ans" in
+y|Y) val="$define" ;;
+*) val="$undef" ;;
+esac
+set userelocatableinc
+eval $setvar
+
+: Default prefix is now "up one level from where the binaries are"
+case "$userelocatableinc" in
+$define|true|[yY]*)
+ initialinstalllocation="$binexp"
+ bin=".../"
+ binexp=".../"
+ prefix=".../.."
+ prefixexp=".../.."
+ installprefixexp=".../.."
+ ;;
+esac
+
: determine where private library files go
: Usual default is /usr/local/lib/perl5/$version.
-: Also allow things like /opt/perl/lib/$version, since
+: Also allow things like /opt/perl/lib/$version, since
: /opt/perl/lib/perl5... would be redundant.
: The default "style" setting is made in installstyle.U
case "$installstyle" in
private library directory that is accessible by everyone.
EOM
+fn=$binexp
fn=d~+
rp='Pathname where the private library files will reside?'
. ./getfile
-privlib="$ans"
-privlibexp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installprivlib=`echo $privlibexp | sed "s#^$prefix#$installprefix#"`
-else
- installprivlib="$privlibexp"
-fi
+prefixvar=privlib
+. ./setprefixvar
: set the prefixup variable, to restore leading tilda escape
prefixup='case "$prefixexp" in
them with the rest of the public library files.
EOM
+fn=$binexp
fn=d+~
rp='Where do you want to put the public architecture-dependent libraries?'
. ./getfile
-archlib="$ans"
-archlibexp="$ansexp"
+prefixvar=archlib
+. ./setprefixvar
if $test X"$archlib" = X"$privlib"; then
d_archlib="$undef"
else
d_archlib="$define"
fi
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installarchlib=`echo $archlibexp | sed "s#^$prefix#$installprefix#"`
-else
- installarchlib="$archlibexp"
-fi
: see if setuid scripts can be secure
$cat <<EOM
(If setuid #! scripts would be secure but have been disabled anyway,
don't say that they are secure if asked.)
-EOM
+EOM
+
+val="$undef"
+if $test -d /dev/fd; then
+ echo "#!$ls" >reflect
+ chmod +x,u+s reflect
+ ./reflect >flect 2>&1
+ if $contains "/dev/fd" flect >/dev/null; then
+ echo "Congratulations, your kernel has secure setuid scripts!" >&4
+ val="$define"
+ else
+ $cat <<EOM
+If you are not sure if they are secure, I can check but I'll need a
+username and password different from the one you are using right now.
+If you don't have such a username or don't want me to test, simply
+enter 'none'.
+
+EOM
+ rp='Other username to test security of setuid scripts with?'
+ dflt='none'
+ . ./myread
+ case "$ans" in
+ n|none)
+ case "$d_suidsafe" in
+ '') echo "I'll assume setuid scripts are *not* secure." >&4
+ dflt=n;;
+ "$undef")
+ echo "Well, the $hint value is *not* secure." >&4
+ dflt=n;;
+ *) echo "Well, the $hint value *is* secure." >&4
+ dflt=y;;
+ esac
+ ;;
+ *)
+ $rm -f reflect flect
+ echo "#!$ls" >reflect
+ chmod +x,u+s reflect
+ echo >flect
+ chmod a+w flect
+ echo '"su" will (probably) prompt you for '"$ans's password."
+ su $ans -c './reflect >flect'
+ if $contains "/dev/fd" flect >/dev/null; then
+ echo "Okay, it looks like setuid scripts are secure." >&4
+ dflt=y
+ else
+ echo "I don't think setuid scripts are secure." >&4
+ dflt=n
+ fi
+ ;;
+ esac
+ rp='Does your kernel have *secure* setuid scripts?'
+ . ./myread
+ case "$ans" in
+ [yY]*) val="$define";;
+ *) val="$undef";;
+ esac
+ fi
+else
+ echo "I don't think setuid scripts are secure (no /dev/fd directory)." >&4
+ echo "(That's for file descriptors, not floppy disks.)"
+ val="$undef"
+fi
+set d_suidsafe
+eval $setvar
+
+$rm -f reflect flect
+
+: now see if they want to do setuid emulation
+echo " "
+val="$undef"
+case "$d_suidsafe" in
+"$define")
+ val="$undef"
+ echo "No need to emulate SUID scripts since they are secure here." >&4
+ ;;
+*)
+ $cat <<EOM
+Some systems have disabled setuid scripts, especially systems where
+setuid scripts cannot be secure. On systems where setuid scripts have
+been disabled, the setuid/setgid bits on scripts are currently
+useless. It is possible for $package to detect those bits and emulate
+setuid/setgid in a secure fashion. This emulation will only work if
+setuid scripts have been disabled in your kernel.
+
+EOM
+ case "$d_dosuid" in
+ "$define") dflt=y ;;
+ *) dflt=n ;;
+ esac
+ rp="Do you want to do setuid/setgid emulation?"
+ . ./myread
+ case "$ans" in
+ [yY]*) val="$define";;
+ *) val="$undef";;
+ esac
+ ;;
+esac
+set d_dosuid
+eval $setvar
+
+: Find perl5.005 or later.
+echo "Looking for a previously installed perl5.005 or later... "
+case "$perl5" in
+'') for tdir in `echo "$binexp$path_sep$PATH" | $sed "s/$path_sep/ /g"`; do
+ : Check if this perl is recent and can load a simple module
+ if $test -x $tdir/perl$exe_ext && $tdir/perl -Mless -e 'use 5.005;' >/dev/null 2>&1; then
+ perl5=$tdir/perl
+ break;
+ elif $test -x $tdir/perl5$exe_ext && $tdir/perl5 -Mless -e 'use 5.005;' >/dev/null 2>&1; then
+ perl5=$tdir/perl5
+ break;
+ fi
+ done
+ ;;
+*) perl5="$perl5"
+ ;;
+esac
+case "$perl5" in
+'') echo "None found. That's ok.";;
+*) echo "Using $perl5." ;;
+esac
+
+$cat <<EOM
+
+After $package is installed, you may wish to install various
+add-on modules and utilities. Typically, these add-ons will
+be installed under $prefix with the rest
+of this package. However, you may wish to install such add-ons
+elsewhere under a different prefix.
+
+If you do not wish to put everything under a single prefix, that's
+ok. You will be prompted for the individual locations; this siteprefix
+is only used to suggest the defaults.
+
+The default should be fine for most people.
+
+EOM
+fn=d~+
+rp='Installation prefix to use for add-on modules and utilities?'
+: XXX Here might be another good place for an installstyle setting.
+case "$siteprefix" in
+'') dflt=$prefix ;;
+*) dflt=$siteprefix ;;
+esac
+. ./getfile
+: XXX Prefixit unit does not yet support siteprefix and vendorprefix
+oldsiteprefix=''
+case "$siteprefix" in
+'') ;;
+*) case "$ans" in
+ "$prefix") ;;
+ *) oldsiteprefix="$prefix";;
+ esac
+ ;;
+esac
+siteprefix="$ans"
+siteprefixexp="$ansexp"
+
+: determine where site specific libraries go.
+: Usual default is /usr/local/lib/perl5/site_perl/$version
+: The default "style" setting is made in installstyle.U
+: XXX No longer works with Prefixit stuff.
+prog=`echo $package | $sed 's/-*[0-9.]*$//'`
+case "$sitelib" in
+'') case "$installstyle" in
+ *lib/perl5*) dflt=$siteprefix/lib/$package/site_$prog/$version ;;
+ *) dflt=$siteprefix/lib/site_$prog/$version ;;
+ esac
+ ;;
+*) dflt="$sitelib"
+ ;;
+esac
+$cat <<EOM
+
+The installation process will create a directory for
+site-specific extensions and modules. Most users find it convenient
+to place all site-specific files in this directory rather than in the
+main distribution directory.
+
+EOM
+fn=d~+
+rp='Pathname for the site-specific library files?'
+. ./getfile
+prefixvar=sitelib
+. ./setprefixvar
+sitelib_stem=`echo "$sitelibexp" | sed "s,/$version$,,"`
+
+: Determine list of previous versions to include in @INC
+$cat > getverlist <<EOPL
+#!$perl5 -w
+use File::Basename;
+\$api_versionstring = "$api_versionstring";
+\$version = "$version";
+\$stem = "$sitelib_stem";
+\$archname = "$archname";
+EOPL
+ $cat >> getverlist <<'EOPL'
+# Can't have leading @ because metaconfig interprets it as a command!
+;@inc_version_list=();
+# XXX Redo to do opendir/readdir?
+if (-d $stem) {
+ chdir($stem);
+ ;@candidates = glob("5.*");
+}
+else {
+ ;@candidates = ();
+}
+
+# XXX ToDo: These comparisons must be reworked when two-digit
+# subversions come along, so that 5.7.10 compares as greater than
+# 5.7.3! By that time, hope that 5.6.x is sufficiently
+# widespread that we can use the built-in version vectors rather
+# than reinventing them here. For 5.6.0, however, we must
+# assume this script will likely be run by 5.005_0x. --AD 1/2000.
+foreach $d (@candidates) {
+ if ($d lt $version) {
+ if ($d ge $api_versionstring) {
+ unshift(@inc_version_list, grep { -d } "$d/$archname", $d);
+ }
+ elsif ($d ge "5.005") {
+ unshift(@inc_version_list, grep { -d } $d);
+ }
+ }
+ else {
+ # Skip newer version. I.e. don't look in
+ # 5.7.0 if we're installing 5.6.1.
+ }
+}
-val="$undef"
-if $test -d /dev/fd; then
- echo "#!$ls" >reflect
- chmod +x,u+s reflect
- ./reflect >flect 2>&1
- if $contains "/dev/fd" flect >/dev/null; then
- echo "Congratulations, your kernel has secure setuid scripts!" >&4
- val="$define"
+if (@inc_version_list) {
+ print join(' ', @inc_version_list);
+}
+else {
+ # Blank space to preserve value for next Configure run.
+ print " ";
+}
+EOPL
+chmod +x getverlist
+case "$inc_version_list" in
+'') if test -x "$perl5$exe_ext"; then
+ dflt=`$perl5 getverlist`
else
- $cat <<EOM
-If you are not sure if they are secure, I can check but I'll need a
-username and password different from the one you are using right now.
-If you don't have such a username or don't want me to test, simply
-enter 'none'.
-
-EOM
- rp='Other username to test security of setuid scripts with?'
dflt='none'
- . ./myread
- case "$ans" in
- n|none)
- case "$d_suidsafe" in
- '') echo "I'll assume setuid scripts are *not* secure." >&4
- dflt=n;;
- "$undef")
- echo "Well, the $hint value is *not* secure." >&4
- dflt=n;;
- *) echo "Well, the $hint value *is* secure." >&4
- dflt=y;;
- esac
- ;;
- *)
- $rm -f reflect flect
- echo "#!$ls" >reflect
- chmod +x,u+s reflect
- echo >flect
- chmod a+w flect
- echo '"su" will (probably) prompt you for '"$ans's password."
- su $ans -c './reflect >flect'
- if $contains "/dev/fd" flect >/dev/null; then
- echo "Okay, it looks like setuid scripts are secure." >&4
- dflt=y
- else
- echo "I don't think setuid scripts are secure." >&4
- dflt=n
- fi
- ;;
- esac
- rp='Does your kernel have *secure* setuid scripts?'
- . ./myread
- case "$ans" in
- [yY]*) val="$define";;
- *) val="$undef";;
- esac
fi
-else
- echo "I don't think setuid scripts are secure (no /dev/fd directory)." >&4
- echo "(That's for file descriptors, not floppy disks.)"
- val="$undef"
-fi
-set d_suidsafe
-eval $setvar
-
-$rm -f reflect flect
-
-: now see if they want to do setuid emulation
-echo " "
-val="$undef"
-case "$d_suidsafe" in
-"$define")
- val="$undef"
- echo "No need to emulate SUID scripts since they are secure here." >&4
;;
-*)
- $cat <<EOM
-Some systems have disabled setuid scripts, especially systems where
-setuid scripts cannot be secure. On systems where setuid scripts have
-been disabled, the setuid/setgid bits on scripts are currently
-useless. It is possible for $package to detect those bits and emulate
-setuid/setgid in a secure fashion. This emulation will only work if
-setuid scripts have been disabled in your kernel.
+$undef) dflt='none' ;;
+*) eval dflt=\"$inc_version_list\" ;;
+esac
+case "$dflt" in
+''|' ') dflt=none ;;
+esac
+case "$dflt" in
+5.005) dflt=none ;;
+esac
+$cat <<EOM
+
+In order to ease the process of upgrading, this version of perl
+can be configured to use modules built and installed with earlier
+versions of perl that were installed under $prefix. Specify here
+the list of earlier versions that this version of perl should check.
+If Configure detected no earlier versions of perl installed under
+$prefix, then the list will be empty. Answer 'none' to tell perl
+to not search earlier versions.
+The default should almost always be sensible, so if you're not sure,
+just accept the default.
EOM
- case "$d_dosuid" in
- "$define") dflt=y ;;
- *) dflt=n ;;
- esac
- rp="Do you want to do setuid/setgid emulation?"
- . ./myread
- case "$ans" in
- [yY]*) val="$define";;
- *) val="$undef";;
- esac
+
+rp='List of earlier versions to include in @INC?'
+. ./myread
+case "$ans" in
+[Nn]one|''|' '|$undef) inc_version_list=' ' ;;
+*) inc_version_list="$ans" ;;
+esac
+case "$inc_version_list" in
+''|' ')
+ inc_version_list_init='0'
+ d_inc_version_list="$undef"
+ ;;
+*) inc_version_list_init=`echo $inc_version_list |
+ $sed -e 's/^/"/' -e 's/ /","/g' -e 's/$/",0/'`
+ d_inc_version_list="$define"
;;
esac
-set d_dosuid
-eval $setvar
+$rm -f getverlist
: see if this is a malloc.h system
: we want a real compile instead of Inhdr because some systems have a
esac
echo "Your system uses $freetype free(), it would seem." >&4
$rm -f malloc.[co]
-$cat <<EOM
-
-After $package is installed, you may wish to install various
-add-on modules and utilities. Typically, these add-ons will
-be installed under $prefix with the rest
-of this package. However, you may wish to install such add-ons
-elsewhere under a different prefix.
-
-If you do not wish to put everything under a single prefix, that's
-ok. You will be prompted for the individual locations; this siteprefix
-is only used to suggest the defaults.
-
-The default should be fine for most people.
-
-EOM
-fn=d~+
-rp='Installation prefix to use for add-on modules and utilities?'
-: XXX Here might be another good place for an installstyle setting.
-case "$siteprefix" in
-'') dflt=$prefix ;;
-*) dflt=$siteprefix ;;
-esac
-. ./getfile
-: XXX Prefixit unit does not yet support siteprefix and vendorprefix
-oldsiteprefix=''
-case "$siteprefix" in
-'') ;;
-*) case "$ans" in
- "$prefix") ;;
- *) oldsiteprefix="$prefix";;
- esac
- ;;
-esac
-siteprefix="$ans"
-siteprefixexp="$ansexp"
-
-: determine where site specific libraries go.
-: Usual default is /usr/local/lib/perl5/site_perl/$version
-: The default "style" setting is made in installstyle.U
-: XXX No longer works with Prefixit stuff.
-prog=`echo $package | $sed 's/-*[0-9.]*$//'`
-case "$sitelib" in
-'') case "$installstyle" in
- *lib/perl5*) dflt=$siteprefix/lib/$package/site_$prog/$version ;;
- *) dflt=$siteprefix/lib/site_$prog/$version ;;
- esac
- ;;
-*) dflt="$sitelib"
- ;;
-esac
-$cat <<EOM
-
-The installation process will create a directory for
-site-specific extensions and modules. Most users find it convenient
-to place all site-specific files in this directory rather than in the
-main distribution directory.
-
-EOM
-fn=d~+
-rp='Pathname for the site-specific library files?'
-. ./getfile
-sitelib="$ans"
-sitelibexp="$ansexp"
-sitelib_stem=`echo "$sitelibexp" | sed "s,/$version$,,"`
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installsitelib=`echo $sitelibexp | $sed "s#^$prefix#$installprefix#"`
-else
- installsitelib="$sitelibexp"
-fi
-
: determine where site specific architecture-dependent libraries go.
: sitelib default is /usr/local/lib/perl5/site_perl/$version
: sitearch default is /usr/local/lib/perl5/site_perl/$version/$archname
fn=d~+
rp='Pathname for the site-specific architecture-dependent library files?'
. ./getfile
-sitearch="$ans"
-sitearchexp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installsitearch=`echo $sitearchexp | sed "s#^$prefix#$installprefix#"`
+prefixvar=sitearch
+. ./setprefixvar
+if $test X"$sitearch" = X"$sitelib"; then
+ d_sitearch="$undef"
else
- installsitearch="$sitearchexp"
+ d_sitearch="$define"
fi
$cat <<EOM
;;
esac
vendorlib_stem=`echo "$vendorlibexp" | sed "s,/$version$,,"`
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installvendorlib=`echo $vendorlibexp | $sed "s#^$prefix#$installprefix#"`
-else
- installvendorlib="$vendorlibexp"
-fi
+prefixvar=vendorlib
+. ./installprefix
case "$vendorprefix" in
'') d_vendorarch="$undef"
vendorarchexp="$ansexp"
;;
esac
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installvendorarch=`echo $vendorarchexp | sed "s#^$prefix#$installprefix#"`
-else
- installvendorarch="$vendorarchexp"
-fi
+prefixvar=vendorarch
+. ./installprefix
: Final catch-all directories to search
$cat <<EOM
If GNU cc is available for your system, perhaps you could try that instead.
Eventually, we hope to support building Perl with pre-ANSI compilers.
-If you would like to help in that effort, please contact <perlbug@perl.org>.
-
-Aborting Configure now.
-EOM
- exit 2
- ;;
-esac
-
-: determine where public executables go
-echo " "
-set dflt bin bin
-eval $prefixit
-fn=d~
-rp='Pathname where the public executables will reside?'
-. ./getfile
-if $test "X$ansexp" != "X$binexp"; then
- installbin=''
-fi
-bin="$ans"
-binexp="$ansexp"
-: Change installation prefix, if necessary.
-: XXX Bug? -- ignores Configure -Dinstallprefix setting.
-if $test X"$prefix" != X"$installprefix"; then
- installbin=`echo $binexp | sed "s#^$prefix#$installprefix#"`
-else
- installbin="$binexp"
-fi
+If you would like to help in that effort, please contact <perlbug@perl.org>.
+
+Aborting Configure now.
+EOM
+ exit 2
+ ;;
+esac
echo " "
case "$extras" in
eval $prefixit
$cat <<EOM
-If you wish to install html files for programs in $spackage, indicate
+If you wish to install html files for programs in $spackage, indicate
the appropriate directory here. To skip installing html files,
answer "none".
EOM
fn=dn+~
rp="Directory for the main $spackage html pages?"
. ./getfile
-html1dir="$ans"
-html1direxp="$ansexp"
+prefixvar=html1dir
+. ./setprefixvar
: Use ' ' for none so value is preserved next time through Configure
$test X"$html1dir" = "X" && html1dir=' '
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installhtml1dir=`echo $html1direxp | sed "s#^$prefix#$installprefix#"`
-else
- installhtml1dir="$html1direxp"
-fi
: determine where html pages for libraries and modules go
set html3dir html3dir none
fn=dn+~
rp="Directory for the $spackage module html pages?"
. ./getfile
-html3dir="$ans"
-html3direxp="$ansexp"
+prefixvar=html3dir
+. ./setprefixvar
: Use ' ' for none so value is preserved next time through Configure
$test X"$html3dir" = "X" && html3dir=' '
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installhtml3dir=`echo $html3direxp | sed "s#^$prefix#$installprefix#"`
-else
- installhtml3dir="$html3direxp"
-fi
-
-: Find perl5.005 or later.
-echo "Looking for a previously installed perl5.005 or later... "
-case "$perl5" in
-'') for tdir in `echo "$binexp$path_sep$PATH" | $sed "s/$path_sep/ /g"`; do
- : Check if this perl is recent and can load a simple module
- if $test -x $tdir/perl$exe_ext && $tdir/perl -Mless -e 'use 5.005;' >/dev/null 2>&1; then
- perl5=$tdir/perl
- break;
- elif $test -x $tdir/perl5$exe_ext && $tdir/perl5 -Mless -e 'use 5.005;' >/dev/null 2>&1; then
- perl5=$tdir/perl5
- break;
- fi
- done
- ;;
-*) perl5="$perl5"
- ;;
-esac
-case "$perl5" in
-'') echo "None found. That's ok.";;
-*) echo "Using $perl5." ;;
-esac
-
-: Determine list of previous versions to include in @INC
-$cat > getverlist <<EOPL
-#!$perl5 -w
-use File::Basename;
-\$api_versionstring = "$api_versionstring";
-\$version = "$version";
-\$stem = "$sitelib_stem";
-\$archname = "$archname";
-EOPL
- $cat >> getverlist <<'EOPL'
-# Can't have leading @ because metaconfig interprets it as a command!
-;@inc_version_list=();
-# XXX Redo to do opendir/readdir?
-if (-d $stem) {
- chdir($stem);
- ;@candidates = glob("5.*");
-}
-else {
- ;@candidates = ();
-}
-
-# XXX ToDo: These comparisons must be reworked when two-digit
-# subversions come along, so that 5.7.10 compares as greater than
-# 5.7.3! By that time, hope that 5.6.x is sufficiently
-# widespread that we can use the built-in version vectors rather
-# than reinventing them here. For 5.6.0, however, we must
-# assume this script will likely be run by 5.005_0x. --AD 1/2000.
-foreach $d (@candidates) {
- if ($d lt $version) {
- if ($d ge $api_versionstring) {
- unshift(@inc_version_list, grep { -d } "$d/$archname", $d);
- }
- elsif ($d ge "5.005") {
- unshift(@inc_version_list, grep { -d } $d);
- }
- }
- else {
- # Skip newer version. I.e. don't look in
- # 5.7.0 if we're installing 5.6.1.
- }
-}
-
-if (@inc_version_list) {
- print join(' ', @inc_version_list);
-}
-else {
- # Blank space to preserve value for next Configure run.
- print " ";
-}
-EOPL
-chmod +x getverlist
-case "$inc_version_list" in
-'') if test -x "$perl5$exe_ext"; then
- dflt=`$perl5 getverlist`
- else
- dflt='none'
- fi
- ;;
-$undef) dflt='none' ;;
-*) eval dflt=\"$inc_version_list\" ;;
-esac
-case "$dflt" in
-''|' ') dflt=none ;;
-esac
-case "$dflt" in
-5.005) dflt=none ;;
-esac
-$cat <<EOM
-
-In order to ease the process of upgrading, this version of perl
-can be configured to use modules built and installed with earlier
-versions of perl that were installed under $prefix. Specify here
-the list of earlier versions that this version of perl should check.
-If Configure detected no earlier versions of perl installed under
-$prefix, then the list will be empty. Answer 'none' to tell perl
-to not search earlier versions.
-
-The default should almost always be sensible, so if you're not sure,
-just accept the default.
-EOM
-
-rp='List of earlier versions to include in @INC?'
-. ./myread
-case "$ans" in
-[Nn]one|''|' '|$undef) inc_version_list=' ' ;;
-*) inc_version_list="$ans" ;;
-esac
-case "$inc_version_list" in
-''|' ')
- inc_version_list_init='0';;
-*) inc_version_list_init=`echo $inc_version_list |
- $sed -e 's/^/"/' -e 's/ /","/g' -e 's/$/",0/'`
- ;;
-esac
-$rm -f getverlist
: determine whether to install perl also as /usr/bin/perl
if $test "X$man1direxp" != "X$ansexp"; then
installman1dir=''
fi
-man1dir="$ans"
-man1direxp="$ansexp"
+prefixvar=man1dir
+. ./setprefixvar
+
case "$man1dir" in
'') man1dir=' '
installman1dir='';;
esac
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installman1dir=`echo $man1direxp | $sed "s#^$prefix#$installprefix#"`
-else
- installman1dir="$man1direxp"
-fi
-
: What suffix to use on installed man pages
case "$man1dir" in
case "$d_flexfnam" in
undef)
$cat <<'EOM'
-However, your system can't handle the long file names like File::Basename.3.
+However, your system can't handle the long file names like File::Basename.3.
EOM
case "$man3dir" in
'') man3dir="none";;
cat <<EOM >&4
WARNING: Previous versions of perl installed man3 pages into
-$privlib/man/man3. This version will suggest a
-new default of $dflt.
+$privlib/man/man3. This version will suggest a
+new default of $dflt.
EOM
tdflt=$dflt
dflt='n'
fn=dn+~
rp="Where do the $package library man pages (source) go?"
. ./getfile
-man3dir="$ans"
-man3direxp="$ansexp"
+prefixvar=man3dir
+. ./setprefixvar
+
case "$man3dir" in
'') man3dir=' '
installman3dir='';;
esac
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installman3dir=`echo $man3direxp | $sed "s#^$prefix#$installprefix#"`
-else
- installman3dir="$man3direxp"
-fi
-
: What suffix to use on installed man pages
case "$man3dir" in
' ')
;;
esac
$cat <<EOM
-
+
Some installations have a separate directory just for executable scripts so
that they can mount it across multiple architectures but keep the scripts in
one spot. You might, for example, have a subdirectory of /usr/share for this.
Or you might just lump your scripts in with all your other executables.
-
+
EOM
fn=d~
rp='Where do you keep publicly executable scripts?'
if $test "X$ansexp" != "X$scriptdirexp"; then
installscript=''
fi
-scriptdir="$ans"
-scriptdirexp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installscript=`echo $scriptdirexp | sed "s#^$prefix#$installprefix#"`
-else
- installscript="$scriptdirexp"
-fi
+installscriptdir=''
+prefixvar=scriptdir
+. ./setprefixvar
+: A little fix up for an irregularly named variable.
+installscript="$installscriptdir"
: determine where add-on public executables go
case "$sitebin" in
fn=d~
rp='Pathname where the add-on public executables should be installed?'
. ./getfile
-sitebin="$ans"
-sitebinexp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installsitebin=`echo $sitebinexp | sed "s#^$prefix#$installprefix#"`
-else
- installsitebin="$sitebinexp"
-fi
+prefixvar=sitebin
+. ./setprefixvar
: determine where add-on html pages go
: There is no standard location, so try to copy the previously-selected
fn=dn+~
rp='Pathname where the site-specific html pages should be installed?'
. ./getfile
-sitehtml1dir="$ans"
-sitehtml1direxp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installsitehtml1dir=`echo $sitehtml1direxp | $sed "s#^$prefix#$installprefix#"`
-else
- installsitehtml1dir="$sitehtml1direxp"
-fi
+prefixvar=sitehtml1dir
+. ./setprefixvar
: determine where add-on library html pages go
: There is no standard location, so try to copy the previously-selected
fn=dn+~
rp='Pathname where the site-specific library html pages should be installed?'
. ./getfile
-sitehtml3dir="$ans"
-sitehtml3direxp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installsitehtml3dir=`echo $sitehtml3direxp | $sed "s#^$prefix#$installprefix#"`
-else
- installsitehtml3dir="$sitehtml3direxp"
-fi
+prefixvar=sitehtml3dir
+. ./setprefixvar
: determine where add-on manual pages go
case "$siteman1dir" in
'') dflt=`echo $man1dir | $sed "s#^$prefix#$siteprefix#"` ;;
-*) dflt=$siteman1dir ;;
+*) dflt=$siteman1dir ;;
esac
case "$dflt" in
''|' ') dflt=none ;;
fn=dn+~
rp='Pathname where the site-specific manual pages should be installed?'
. ./getfile
-siteman1dir="$ans"
-siteman1direxp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installsiteman1dir=`echo $siteman1direxp | $sed "s#^$prefix#$installprefix#"`
-else
- installsiteman1dir="$siteman1direxp"
-fi
+prefixvar=siteman1dir
+. ./setprefixvar
: determine where add-on library man pages go
case "$siteman3dir" in
'') dflt=`echo $man3dir | $sed "s#^$prefix#$siteprefix#"` ;;
-*) dflt=$siteman3dir ;;
+*) dflt=$siteman3dir ;;
esac
case "$dflt" in
''|' ') dflt=none ;;
fn=dn+~
rp='Pathname where the site-specific library manual pages should be installed?'
. ./getfile
-siteman3dir="$ans"
-siteman3direxp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installsiteman3dir=`echo $siteman3direxp | $sed "s#^$prefix#$installprefix#"`
-else
- installsiteman3dir="$siteman3direxp"
-fi
+prefixvar=siteman3dir
+. ./setprefixvar
: determine where add-on public executable scripts go
case "$sitescript" in
fn=d~+
rp='Pathname where add-on public executable scripts should be installed?'
. ./getfile
-sitescript="$ans"
-sitescriptexp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installsitescript=`echo $sitescriptexp | sed "s#^$prefix#$installprefix#"`
-else
- installsitescript="$sitescriptexp"
-fi
+prefixvar=sitescript
+. ./setprefixvar
case "$usefaststdio" in
$define|true|[yY]*|'')
;;
esac
-# probably will refer to
-# $archlib $privlib $sitearch $sitelib $vendorarch $vendorlib
-need_relocation=0
-userelocatableinc=undef
-
case "$vendorprefix" in
'') d_vendorbin="$undef"
vendorbin=''
vendorbinexp="$ansexp"
;;
esac
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installvendorbin=`echo $vendorbinexp | $sed "s#^$prefix#$installprefix#"`
-else
- installvendorbin="$vendorbinexp"
-fi
+prefixvar=vendorbin
+. ./installprefix
case "$vendorprefix" in
'') vendorhtml1dir=''
esac
: Use ' ' for none so value is preserved next time through Configure
$test X"$vendorhtml1dir" = "X" && vendorhtml1dir=' '
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installvendorhtml1dir=`echo $vendorhtml1direxp | $sed "s#^$prefix#$installprefix#"`
-else
- installvendorhtml1dir="$vendorhtml1direxp"
-fi
+prefixvar=vendorhtml1dir
+. ./installprefix
case "$vendorprefix" in
'') vendorhtml3dir=''
esac
: Use ' ' for none so value is preserved next time through Configure
$test X"$vendorhtml3dir" = "X" && vendorhtml3dir=' '
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installvendorhtml3dir=`echo $vendorhtml3direxp | $sed "s#^$prefix#$installprefix#"`
-else
- installvendorhtml3dir="$vendorhtml3direxp"
-fi
+prefixvar=vendorhtml3dir
+. ./installprefix
case "$vendorprefix" in
'') vendorman1dir=''
esac
: Use ' ' for none so value is preserved next time through Configure
$test X"$vendorman1dir" = "X" && vendorman1dir=' '
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installvendorman1dir=`echo "$vendorman1direxp" | $sed "s#^$prefix#$installprefix#"`
-else
- installvendorman1dir="$vendorman1direxp"
-fi
+prefixvar=vendorman1dir
+. ./installprefix
case "$vendorprefix" in
'') vendorman3dir=''
esac
: Use ' ' for none so value is preserved next time through Configure
$test X"$vendorman3dir" = "X" && vendorman3dir=' '
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installvendorman3dir=`echo "$vendorman3direxp" | $sed "s#^$prefix#$installprefix#"`
-else
- installvendorman3dir="$vendorman3direxp"
-fi
+prefixvar=vendorman3dir
+. ./installprefix
case "$vendorprefix" in
'') d_vendorscript="$undef"
esac
$cat <<EOM
-The installation process will create a directory for
+The installation process will create a directory for
vendor-supplied scripts.
EOM
vendorscriptexp="$ansexp"
;;
esac
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installvendorscript=`echo $vendorscriptexp | $sed "s#^$prefix#$installprefix#"`
-else
- installvendorscript="$vendorscriptexp"
-fi
+prefixvar=vendorscript
+. ./installprefix
: see if qgcvt exists
set qgcvt d_qgcvt
set d_bsdsetpgrp
eval $setvar
$rm -f try try.*
+: Look for GCC-style __builtin_choose_expr
+case "$d_builtin_choose_expr" in
+'')
+ echo " "
+ echo "Checking whether your compiler can handle __builtin_choose_expr ..." >&4
+ $cat >try.c <<'EOCP'
+#include <assert.h>
+#include <stdlib.h>
+#include <stdio.h>
+
+#define SYRINX(x) __builtin_choose_expr( x, (1056*2), (103*50) )
+
+int main(void) {
+ assert( SYRINX(1) == 2112 );
+ assert( SYRINX(1) != 5150 );
+ assert( SYRINX(0) == 5150 );
+ assert( SYRINX(0) != 2112 );
+ puts( "All good!" );
+ exit(0);
+}
+
+EOCP
+ set try
+ if eval $compile; then
+ echo "Your C compiler supports __builtin_choose_expr."
+ val="$define"
+ else
+ echo "Your C compiler doesn't seem to understand __builtin_choose_expr."
+ val="$undef"
+ fi
+;;
+*) val="$d_builtin_choose_expr" ;;
+esac
+
+set d_builtin_choose_expr
+eval $setvar
+$rm -f try.* try core core.try.*
+
+: Look for GCC-style __builtin_expect
+case "$d_builtin_expect" in
+'')
+ echo " "
+ echo "Checking whether your compiler can handle __builtin_expect ..." >&4
+ $cat >builtin.c <<'EOCP'
+int main(void) {
+ int n = 50;
+ if ( __builtin_expect(n, 0) ) n = 1;
+}
+EOCP
+ set try
+ if eval $compile; then
+ echo "Your C compiler supports __builtin_choose_expr."
+ val="$define"
+ else
+ echo "Your C compiler doesn't seem to understand __builtin_choose_expr."
+ val="$undef"
+ fi
+ ;;
+*) val="$d_builtin_expect" ;;
+esac
+
+set d_builtin_expect
+eval $setvar
+$rm -f try.* try core core.try.*
+
: see if bzero exists
set bzero d_bzero
eval $inlibc
*) groupstype="$gidtype";;
esac
+
+case "$mad" in
+$define|true|[yY]*) dflt='y' ;;
+*) dflt='n' ;;
+esac
+cat <<EOM
+
+Would you like to build with Misc Attribute Decoration? This is development
+work leading to a Perl 5 to Perl 6 convertor, which imposes a space and speed
+overhead on the interpreter.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+rp='Build Perl with MAD?'
+. ./myread
+case "$ans" in
+y|Y) val="$define"
+ madlyh='madly.h madly.act madly.tab'
+ madlysrc='madly.c'
+ madlyobj="madly$_o" ;;
+*) val="$undef"
+ madlyh=''
+ madlysrc=''
+ madlyobj='' ;;
+esac
+set mad
+eval $setvar
+
echo " "
echo "Checking if your $make program sets \$(MAKE)..." >&4
case "$make_set_make" in
$eunicefix Cppsym.try
./Cppsym < Cppsym.know > Cppsym.true
: Add in any linux cpp "predefined macros":
-if [[ "$osname" == *linux* ]] && [[ "$gccversion" != "" ]]; then
- tHdrH=_tmpHdr
- rm -f $tHdrH'.h' $tHdrH
- touch $tHdrH'.h'
- if cpp -dM $tHdrH'.h' > $tHdrH'_cppsym.h' && [ -s $tHdrH'_cppsym.h' ]; then
- sed 's/#define[\ \ ]*//;s/[\ \ ].*$//' <$tHdrH'_cppsym.h' >$tHdrH'_cppsym.real'
- if [ -s $tHdrH'_cppsym.real' ]; then
- cat $tHdrH'_cppsym.real' Cppsym.know | sort | uniq | ./Cppsym | sort | uniq > Cppsym.true
- fi
- fi
- rm -f $tHdrH'.h' $tHdrH'_cppsym.h' $tHdrH'_cppsym.real'
-fi
+case "$osname::$gccversion" in
+ *linux*::*.*)
+ tHdrH=_tmpHdr
+ rm -f $tHdrH'.h' $tHdrH
+ touch $tHdrH'.h'
+ if cpp -dM $tHdrH'.h' > $tHdrH'_cppsym.h' && [ -s $tHdrH'_cppsym.h' ]; then
+ sed 's/#define[\ \ ]*//;s/[\ \ ].*$//' <$tHdrH'_cppsym.h' >$tHdrH'_cppsym.real'
+ if [ -s $tHdrH'_cppsym.real' ]; then
+ cat $tHdrH'_cppsym.real' Cppsym.know | sort | uniq | ./Cppsym | sort | uniq > Cppsym.true
+ fi
+ fi
+ rm -f $tHdrH'.h' $tHdrH'_cppsym.h' $tHdrH'_cppsym.real'
+ ;;
+esac
: now check the C compiler for additional symbols
postprocess_cc_v=''
case "$osname" in
d_bsd='$d_bsd'
d_bsdgetpgrp='$d_bsdgetpgrp'
d_bsdsetpgrp='$d_bsdsetpgrp'
+d_builtin_choose_expr='$d_builtin_choose_expr'
+d_builtin_expect='$d_builtin_expect'
d_bzero='$d_bzero'
d_casti32='$d_casti32'
d_castneg='$d_castneg'
d_hasmntopt='$d_hasmntopt'
d_htonl='$d_htonl'
d_ilogbl='$d_ilogbl'
+d_inc_version_list='$d_inc_version_list'
d_index='$d_index'
d_inetaton='$d_inetaton'
d_int64_t='$d_int64_t'
d_sigaction='$d_sigaction'
d_sigprocmask='$d_sigprocmask'
d_sigsetjmp='$d_sigsetjmp'
+d_sitearch='$d_sitearch'
d_snprintf='$d_snprintf'
d_sockatmark='$d_sockatmark'
d_sockatmarkproto='$d_sockatmarkproto'
inc_version_list_init='$inc_version_list_init'
incpath='$incpath'
inews='$inews'
+initialinstalllocation='$initialinstalllocation'
installarchlib='$installarchlib'
installbin='$installbin'
installhtml1dir='$installhtml1dir'
ls='$ls'
lseeksize='$lseeksize'
lseektype='$lseektype'
+mad='$mad'
+madlyh='$madlyh'
+madlyobj='$madlyobj'
+madlysrc='$madlysrc'
mail='$mail'
mailx='$mailx'
make='$make'
https://perl5.git.perl.org / perl5.git / blobdiff