struct regexp;
struct reg_substr_datum {
- SSize_t min_offset;
- SSize_t max_offset;
+ SSize_t min_offset; /* min pos (in chars) that substr must appear */
+ SSize_t max_offset /* max pos (in chars) that substr must appear */;
SV *substr; /* non-utf8 variant */
SV *utf8_substr; /* utf8 variant */
- SSize_t end_shift;
+ SSize_t end_shift; /* how many fixed chars must end the string */
};
struct reg_substr_data {
+ U8 check_ix; /* index into data[] of check substr */
struct reg_substr_datum data[3]; /* Actual array */
};
const struct regexp_engine* engine; \
REGEXP *mother_re; /* what re is this a lightweight copy of? */ \
HV *paren_names; /* Optional hash of paren names */ \
+ /*--------------------------------------------------------*/ \
/* Information about the match that the perl core uses to */ \
/* manage things */ \
U32 extflags; /* Flags used both externally and internally */ \
U32 intflags; /* Engine Specific Internal flags */ \
void *pprivate; /* Data private to the regex engine which */ \
/* created this object. */ \
+ /*--------------------------------------------------------*/ \
/* Data about the last/current match. These are modified */ \
/* during matching */ \
U32 lastparen; /* last open paren matched */ \
U32 lastcloseparen; /* last close paren matched */ \
/* Array of offsets for (@-) and (@+) */ \
regexp_paren_pair *offs; \
+ char **recurse_locinput; /* used to detect infinite recursion, XXX: move to internal */ \
+ /*--------------------------------------------------------*/ \
/* saved or original string so \digit works forever. */ \
char *subbeg; \
SV_SAVED_COPY /* If non-NULL, SV which is COW from original */\
SSize_t subcoffset; /* suboffset equiv, but in chars (for @-/@+) */ \
/* Information about the match that isn't often used */ \
SSize_t maxlen; /* mininum possible number of chars in string to match */\
+ /*--------------------------------------------------------*/ \
/* offset from wrapped to the start of precomp */ \
PERL_BITFIELD32 pre_prefix:4; \
/* original flags used to compile the pattern, may differ */ \
/* from extflags in various ways */ \
PERL_BITFIELD32 compflags:9; \
+ /*--------------------------------------------------------*/ \
CV *qr_anoncv /* the anon sub wrapped round qr/(?{..})/ */
typedef struct regexp {
const U32 flags,
re_scream_pos_data *data);
SV* (*checkstr) (pTHX_ REGEXP * const rx);
- void (*free) (pTHX_ REGEXP * const rx);
+ void (*rxfree) (pTHX_ REGEXP * const rx);
void (*numbered_buff_FETCH) (pTHX_ REGEXP * const rx, const I32 paren,
SV * const sv);
void (*numbered_buff_STORE) (pTHX_ REGEXP * const rx, const I32 paren,
#endif
REGEXP* (*op_comp) (pTHX_ SV ** const patternp, int pat_count,
OP *expr, const struct regexp_engine* eng,
- REGEXP *VOL old_re,
+ REGEXP *old_re,
bool *is_bare_re, U32 orig_rx_flags, U32 pm_flags);
} regexp_engine;
if (SvTYPE(sv) == SVt_REGEXP)
return (REGEXP*) sv;
-NULL will be returned if a REGEXP* is not found.
+C<NULL> will be returned if a REGEXP* is not found.
=for apidoc Am|bool|SvRXOK|SV* sv
#include "op_reg_common.h"
-#define RXf_PMf_STD_PMMOD (RXf_PMf_MULTILINE|RXf_PMf_SINGLELINE|RXf_PMf_FOLD|RXf_PMf_EXTENDED)
+#define RXf_PMf_STD_PMMOD (RXf_PMf_MULTILINE|RXf_PMf_SINGLELINE|RXf_PMf_FOLD|RXf_PMf_EXTENDED|RXf_PMf_NOCAPTURE)
-#define CASE_STD_PMMOD_FLAGS_PARSE_SET(pmfl) \
- case IGNORE_PAT_MOD: *(pmfl) |= RXf_PMf_FOLD; break; \
- case MULTILINE_PAT_MOD: *(pmfl) |= RXf_PMf_MULTILINE; break; \
- case SINGLE_PAT_MOD: *(pmfl) |= RXf_PMf_SINGLELINE; break; \
- case XTENDED_PAT_MOD: *(pmfl) |= RXf_PMf_EXTENDED; break
+#define CASE_STD_PMMOD_FLAGS_PARSE_SET(pmfl, x_count) \
+ case IGNORE_PAT_MOD: *(pmfl) |= RXf_PMf_FOLD; break; \
+ case MULTILINE_PAT_MOD: *(pmfl) |= RXf_PMf_MULTILINE; break; \
+ case SINGLE_PAT_MOD: *(pmfl) |= RXf_PMf_SINGLELINE; break; \
+ case XTENDED_PAT_MOD: *(pmfl) |= RXf_PMf_EXTENDED; (x_count)++; break;\
+ case NOCAPTURE_PAT_MOD: *(pmfl) |= RXf_PMf_NOCAPTURE; break;
/* Note, includes charset ones, assumes 0 is the default for them */
#define STD_PMMOD_FLAGS_CLEAR(pmfl) \
- *(pmfl) &= ~(RXf_PMf_FOLD|RXf_PMf_MULTILINE|RXf_PMf_SINGLELINE|RXf_PMf_EXTENDED|RXf_PMf_CHARSET)
+ *(pmfl) &= ~(RXf_PMf_FOLD|RXf_PMf_MULTILINE|RXf_PMf_SINGLELINE|RXf_PMf_EXTENDED|RXf_PMf_CHARSET|RXf_PMf_NOCAPTURE)
/* chars and strings used as regex pattern modifiers
* Singular is a 'c'har, plural is a "string"
#define DEFAULT_PAT_MOD '^' /* Short for all the default modifiers */
#define EXEC_PAT_MOD 'e'
#define KEEPCOPY_PAT_MOD 'p'
+#define NOCAPTURE_PAT_MOD 'n'
#define ONCE_PAT_MOD 'o'
#define GLOBAL_PAT_MOD 'g'
#define CONTINUE_PAT_MOD 'c'
#define ONCE_PAT_MODS "o"
#define KEEPCOPY_PAT_MODS "p"
+#define NOCAPTURE_PAT_MODS "n"
#define EXEC_PAT_MODS "e"
#define LOOP_PAT_MODS "gc"
#define NONDESTRUCT_PAT_MODS "r"
/* This string is expected by regcomp.c to be ordered so that the first
* character is the flag in bit RXf_PMf_STD_PMMOD_SHIFT of extflags; the next
* character is bit +1, etc. */
-#define STD_PAT_MODS "msix"
+#define STD_PAT_MODS "msixxn"
#define CHARSET_PAT_MODS ASCII_RESTRICT_PAT_MODS DEPENDS_PAT_MODS LOCALE_PAT_MODS UNICODE_PAT_MODS
* extflags; the next character is in bit +1, etc. */
#define INT_PAT_MODS STD_PAT_MODS KEEPCOPY_PAT_MODS
-#define EXT_PAT_MODS ONCE_PAT_MODS KEEPCOPY_PAT_MODS
+#define EXT_PAT_MODS ONCE_PAT_MODS KEEPCOPY_PAT_MODS NOCAPTURE_PAT_MODS
#define QR_PAT_MODS STD_PAT_MODS EXT_PAT_MODS CHARSET_PAT_MODS
#define M_PAT_MODS QR_PAT_MODS LOOP_PAT_MODS
#define S_PAT_MODS M_PAT_MODS EXEC_PAT_MODS NONDESTRUCT_PAT_MODS
*
*/
-/* Leave some space, so future bit allocations can go either in the shared or
- * unshared area without affecting binary compatibility */
-#define RXf_BASE_SHIFT (_RXf_PMf_SHIFT_NEXT)
-
/*
Set in Perl_pmruntime if op_flags & OPf_SPECIAL, i.e. split. Will
be used by regex engines to check whether they should set
RXf_SKIPWHITE
*/
-#define RXf_SPLIT (1<<(RXf_BASE_SHIFT-1))
-#if RXf_SPLIT != RXf_PMf_SPLIT
-# error "RXf_SPLIT does not match RXf_PMf_SPLIT"
-#endif
-
-/* Manually decorate this function with gcc-style attributes just to
- * avoid having to restructure the header files and their called order,
- * as proto.h would have to be included before this file, and isn't */
-
-PERL_STATIC_INLINE const char *
-get_regex_charset_name(const U32 flags, STRLEN* const lenp)
- __attribute__warn_unused_result__;
-
-#define MAX_CHARSET_NAME_LENGTH 2
-
-PERL_STATIC_INLINE const char *
-get_regex_charset_name(const U32 flags, STRLEN* const lenp)
-{
- /* Returns a string that corresponds to the name of the regex character set
- * given by 'flags', and *lenp is set the length of that string, which
- * cannot exceed MAX_CHARSET_NAME_LENGTH characters */
-
- *lenp = 1;
- switch (get_regex_charset(flags)) {
- case REGEX_DEPENDS_CHARSET: return DEPENDS_PAT_MODS;
- case REGEX_LOCALE_CHARSET: return LOCALE_PAT_MODS;
- case REGEX_UNICODE_CHARSET: return UNICODE_PAT_MODS;
- case REGEX_ASCII_RESTRICTED_CHARSET: return ASCII_RESTRICT_PAT_MODS;
- case REGEX_ASCII_MORE_RESTRICTED_CHARSET:
- *lenp = 2;
- return ASCII_MORE_RESTRICT_PAT_MODS;
- default:
- return "?"; /* Unknown */
- }
-}
+#define RXf_SPLIT RXf_PMf_SPLIT
+
+/* Currently the regex flags occupy a single 32-bit word. Not all bits are
+ * currently used. The lower bits are shared with their corresponding PMf flag
+ * bits, up to but not including _RXf_PMf_SHIFT_NEXT. The unused bits
+ * immediately follow; finally the used RXf-only (unshared) bits, so that the
+ * highest bit in the word is used. This gathers all the unused bits as a pool
+ * in the middle, like so: 11111111111111110000001111111111
+ * where the '1's represent used bits, and the '0's unused. This design allows
+ * us to allocate off one end of the pool if we need to add a shared bit, and
+ * off the other end if we need a non-shared bit, without disturbing the other
+ * bits. This maximizes the likelihood of being able to change things without
+ * breaking binary compatibility.
+ *
+ * To add shared bits, do so in op_reg_common.h. This should change
+ * _RXf_PMf_SHIFT_NEXT so that things won't compile. Then come to regexp.h and
+ * op.h and adjust the constant adders in the definitions of RXf_BASE_SHIFT and
+ * Pmf_BASE_SHIFT down by the number of shared bits you added. That's it.
+ * Things should be binary compatible. But if either of these gets to having
+ * to subtract rather than add, leave at 0 and instead adjust all the entries
+ * that are in terms of it. But if the first one of those is already
+ * RXf_BASE_SHIFT+0, there are no bits left, and a redesign is in order.
+ *
+ * To remove unshared bits, just delete its entry. If you're where breaking
+ * binary compatibility is ok to do, you might want to adjust things to move
+ * the newly opened space so that it gets absorbed into the common pool.
+ *
+ * To add unshared bits, first use up any gaps in the middle. Otherwise,
+ * allocate off the low end until you get to RXf_BASE_SHIFT+0. If that isn't
+ * enough, move RXf_BASE_SHIFT down (if possible) and add the new bit at the
+ * other end instead; this preserves binary compatibility.
+ *
+ * For the regexp bits, PL_reg_extflags_name[] in regnodes.h has a comment
+ * giving which bits are used/unused */
-/* Do we have some sort of anchor? */
-#define RXf_IS_ANCHORED (1<<(RXf_BASE_SHIFT+0))
-#define RXf_UNUSED1 (1<<(RXf_BASE_SHIFT+1))
-#define RXf_UNUSED2 (1<<(RXf_BASE_SHIFT+2))
-#define RXf_UNUSED3 (1<<(RXf_BASE_SHIFT+3))
-#define RXf_UNUSED4 (1<<(RXf_BASE_SHIFT+4))
-#define RXf_UNUSED5 (1<<(RXf_BASE_SHIFT+5))
+#define RXf_BASE_SHIFT (_RXf_PMf_SHIFT_NEXT + 2)
/* What we have seen */
-#define RXf_NO_INPLACE_SUBST (1<<(RXf_BASE_SHIFT+6))
-#define RXf_EVAL_SEEN (1<<(RXf_BASE_SHIFT+7))
-#define RXf_UNUSED8 (1<<(RXf_BASE_SHIFT+8))
+#define RXf_NO_INPLACE_SUBST (1U<<(RXf_BASE_SHIFT+2))
+#define RXf_EVAL_SEEN (1U<<(RXf_BASE_SHIFT+3))
/* Special */
-#define RXf_UNBOUNDED_QUANTIFIER_SEEN (1<<(RXf_BASE_SHIFT+9))
-#define RXf_CHECK_ALL (1<<(RXf_BASE_SHIFT+10))
+#define RXf_UNBOUNDED_QUANTIFIER_SEEN (1U<<(RXf_BASE_SHIFT+4))
+#define RXf_CHECK_ALL (1U<<(RXf_BASE_SHIFT+5))
/* UTF8 related */
-#define RXf_MATCH_UTF8 (1<<(RXf_BASE_SHIFT+11)) /* $1 etc are utf8 */
+#define RXf_MATCH_UTF8 (1U<<(RXf_BASE_SHIFT+6)) /* $1 etc are utf8 */
/* Intuit related */
-#define RXf_USE_INTUIT_NOML (1<<(RXf_BASE_SHIFT+12))
-#define RXf_USE_INTUIT_ML (1<<(RXf_BASE_SHIFT+13))
-#define RXf_INTUIT_TAIL (1<<(RXf_BASE_SHIFT+14))
+#define RXf_USE_INTUIT_NOML (1U<<(RXf_BASE_SHIFT+7))
+#define RXf_USE_INTUIT_ML (1U<<(RXf_BASE_SHIFT+8))
+#define RXf_INTUIT_TAIL (1U<<(RXf_BASE_SHIFT+9))
#define RXf_USE_INTUIT (RXf_USE_INTUIT_NOML|RXf_USE_INTUIT_ML)
+/* Do we have some sort of anchor? */
+#define RXf_IS_ANCHORED (1U<<(RXf_BASE_SHIFT+10))
+
/* Copy and tainted info */
-#define RXf_COPY_DONE (1<<(RXf_BASE_SHIFT+16))
+#define RXf_COPY_DONE (1U<<(RXf_BASE_SHIFT+11))
-/* during execution: pattern temporarily tainted by executing locale ops;
- * post-execution: $1 et al are tainted */
-#define RXf_TAINTED_SEEN (1<<(RXf_BASE_SHIFT+17))
+/* post-execution: $1 et al are tainted */
+#define RXf_TAINTED_SEEN (1U<<(RXf_BASE_SHIFT+12))
/* this pattern was tainted during compilation */
-#define RXf_TAINTED (1<<(RXf_BASE_SHIFT+18))
+#define RXf_TAINTED (1U<<(RXf_BASE_SHIFT+13))
/* Flags indicating special patterns */
-#define RXf_START_ONLY (1<<(RXf_BASE_SHIFT+19)) /* Pattern is /^/ */
-#define RXf_SKIPWHITE (1<<(RXf_BASE_SHIFT+20)) /* Pattern is for a split " " */
-#define RXf_WHITE (1<<(RXf_BASE_SHIFT+21)) /* Pattern is /\s+/ */
-#define RXf_NULL (1U<<(RXf_BASE_SHIFT+22)) /* Pattern is // */
-#if RXf_BASE_SHIFT+22 > 31
-# error Too many RXf_PMf bits used. See regnodes.h for any spare in middle
+#define RXf_START_ONLY (1U<<(RXf_BASE_SHIFT+14)) /* Pattern is /^/ */
+#define RXf_SKIPWHITE (1U<<(RXf_BASE_SHIFT+15)) /* Pattern is for a */
+ /* split " " */
+#define RXf_WHITE (1U<<(RXf_BASE_SHIFT+16)) /* Pattern is /\s+/ */
+#define RXf_NULL (1U<<(RXf_BASE_SHIFT+17)) /* Pattern is // */
+
+/* See comments at the beginning of these defines about adding bits. The
+ * highest bit position should be used, so that if RXf_BASE_SHIFT gets
+ * increased, the #error below will be triggered so that you will be reminded
+ * to adjust things at the other end to keep the bit positions unchanged */
+#if RXf_BASE_SHIFT+17 > 31
+# error Too many RXf_PMf bits used. See comments at beginning of these for what to do
#endif
/*
/* structures for holding and saving the state maintained by regmatch() */
#ifndef MAX_RECURSE_EVAL_NOCHANGE_DEPTH
-#define MAX_RECURSE_EVAL_NOCHANGE_DEPTH 1000
+#define MAX_RECURSE_EVAL_NOCHANGE_DEPTH 10
#endif
typedef I32 CHECKPOINT;
struct {
/* this first element must match u.yes */
struct regmatch_state *prev_yes_state;
- struct regmatch_state *prev_eval;
struct regmatch_state *prev_curlyx;
+ struct regmatch_state *prev_eval;
REGEXP *prev_rex;
CHECKPOINT cp; /* remember current savestack indexes */
CHECKPOINT lastcp;
- U32 close_paren; /* which close bracket is our end */
+ U32 close_paren; /* which close bracket is our end (+1) */
regnode *B; /* the node following us */
+ char *prev_recurse_locinput;
} eval;
struct {
} u;
} regmatch_state;
+
+
/* how many regmatch_state structs to allocate as a single slab.
* We do it in 4K blocks for efficiency. The "3" is 2 for the next/prev
* pointers, plus 1 for any mythical malloc overhead. */
/*
- * Local variables:
- * c-indentation-style: bsd
- * c-basic-offset: 4
- * indent-tabs-mode: nil
- * End:
- *
* ex: set ts=8 sts=4 sw=4 et:
*/