# Additional info from Nigel Head <nhead@ESOC.bitnet>
# and Kenneth Albanowski <kjahds@kjahds.com>
#
-# Consolidated by Andy Dougherty <doughera@lafcol.lafayette.edu>
+# Consolidated by Andy Dougherty <doughera@lafayette.edu>
#
# Updated Thu Feb 8 11:56:10 EST 1996
-# Updated Thu May 30 10:50:22 EDT 1996 by <doughera@lafcol.lafayette.edu>
+# Updated Thu May 30 10:50:22 EDT 1996 by <doughera@lafayette.edu>
# Updated Fri Jun 21 11:07:54 EDT 1996
-# NDBM support for ELF renabled by <kjahds@kjahds.com>
+# NDBM support for ELF re-enabled by <kjahds@kjahds.com>
# No version of Linux supports setuid scripts.
d_suidsafe='undef'
-# perl goes into the /usr tree. See the Filesystem Standard
-# available via anonymous FTP at tsx-11.mit.edu in
-# /pub/linux/docs/linux-standards/fsstnd.
-# Allow a command line override, e.g. Configure -Dprefix=/foo/bar
-case "$prefix" in
-'') prefix='/usr' ;;
-esac
+# No version of Linux needs libutil for perl.
+i_libutil='undef'
-# gcc-2.6.3 defines _G_HAVE_BOOL to 1, but doesn't actually supply bool.
-ccflags="-Dbool=char -DHAS_BOOL $ccflags"
+# Debian and Red Hat, and perhaps other vendors, provide both runtime and
+# development packages for some libraries. The runtime packages contain shared
+# libraries with version information in their names (e.g., libgdbm.so.1.7.3);
+# the development packages supplement this with versionless shared libraries
+# (e.g., libgdbm.so).
+#
+# If you want to link against such a library, you must install the development
+# version of the package.
+#
+# These packages use a -dev naming convention in both Debian and Red Hat:
+# libgdbmg1 (non-development version of GNU libc 2-linked GDBM library)
+# libgdbmg1-dev (development version of GNU libc 2-linked GDBM library)
+# So make sure that for any libraries you wish to link Perl with under
+# Debian or Red Hat you have the -dev packages installed.
-# BSD compatability library no longer needed
-set `echo X "$libswanted "| sed -e 's/ bsd / /'`
+# SuSE Linux can be used as cross-compilation host for Cray XT4 Catamount/Qk.
+if test -d /opt/xt-pe
+then
+ case "`${cc:-cc} -V 2>&1`" in
+ *catamount*) . hints/catamount.sh; return ;;
+ esac
+fi
+
+# Some operating systems (e.g., Solaris 2.6) will link to a versioned shared
+# library implicitly. For example, on Solaris, `ld foo.o -lgdbm' will find an
+# appropriate version of libgdbm, if one is available; Linux, however, doesn't
+# do the implicit mapping.
+ignore_versioned_solibs='y'
+
+# BSD compatibility library no longer needed
+# 'kaffe' has a /usr/lib/libnet.so which is not at all relevant for perl.
+# bind causes issues with several reentrant functions
+set `echo X "$libswanted "| sed -e 's/ bsd / /' -e 's/ net / /' -e 's/ bind / /'`
shift
libswanted="$*"
+# Debian 4.0 puts ndbm in the -lgdbm_compat library.
+echo $libs
+if echo " $libswanted " | grep -q ' gdbm '; then
+ # Only add if gdbm is in libswanted.
+ libswanted="$libswanted gdbm_compat"
+fi
+
# Configure may fail to find lstat() since it's a static/inline
# function in <sys/stat.h>.
d_lstat=define
-# Explanation?
-case "$usemymalloc" in
-'') usemymalloc='n' ;;
+# malloc wrap works
+case "$usemallocwrap" in
+'') usemallocwrap='define' ;;
esac
-case "$optimize" in
-'') optimize='-O2' ;;
+# The system malloc() is about as fast and as frugal as perl's.
+# Since the system malloc() has been the default since at least
+# 5.001, we might as well leave it that way. --AD 10 Jan 2002
+case "$usemymalloc" in
+'') usemymalloc='n' ;;
esac
-# Are we using ELF? Thanks to Kenneth Albanowski <kjahds@kjahds.com>
-# for this test.
-cat >try.c <<'EOM'
-/* Test for whether ELF binaries are produced */
-#include <fcntl.h>
-#include <stdlib.h>
-main() {
- char buffer[4];
- int i=open("a.out",O_RDONLY);
- if(i==-1)
- exit(1); /* fail */
- if(read(i,&buffer[0],4)<4)
- exit(1); /* fail */
- if(buffer[0] != 127 || buffer[1] != 'E' ||
- buffer[2] != 'L' || buffer[3] != 'F')
- exit(1); /* fail */
- exit(0); /* succeed (yes, it's ELF) */
-}
-EOM
-if ${cc:-gcc} try.c >/dev/null 2>&1 && ./a.out; then
- cat <<'EOM' >&4
+uname_minus_m="`$run uname -m 2>/dev/null`"
+uname_minus_m="${uname_minus_m:-"$targetarch"}"
-You appear to have ELF support. I'll try to use it for dynamic loading.
-If dynamic loading doesn't work, read hints/linux.sh for further information.
-EOM
+# Check if we're about to use Intel's ICC compiler
+case "`${cc:-cc} -V 2>&1`" in
+*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
+ # record the version, formats:
+ # icc (ICC) 10.1 20080801
+ # icpc (ICC) 10.1 20080801
+ # followed by a copyright on the second line
+ ccversion=`${cc:-cc} --version | sed -n -e 's/^icp\?c \((ICC) \)\?//p'`
+ # This is needed for Configure's prototype checks to work correctly
+ # The -mp flag is needed to pass various floating point related tests
+ # The -no-gcc flag is needed otherwise, icc pretends (poorly) to be gcc
+ ccflags="-we147 -mp -no-gcc $ccflags"
+ # Prevent relocation errors on 64bits arch
+ case "$uname_minus_m" in
+ *ia64*|*x86_64*)
+ cccdlflags='-fPIC'
+ ;;
+ esac
+ # If we're using ICC, we usually want the best performance
+ case "$optimize" in
+ '') optimize='-O3' ;;
+ esac
+ ;;
+*" Sun "*"C"*)
+ # Sun's C compiler, which might have a 'tag' name between
+ # 'Sun' and the 'C': Examples:
+ # cc: Sun C 5.9 Linux_i386 Patch 124871-01 2007/07/31
+ # cc: Sun Ceres C 5.10 Linux_i386 2008/07/10
+ test "$optimize" || optimize='-xO2'
+ cccdlflags='-KPIC'
+ lddlflags='-G -Bdynamic'
+ # Sun C doesn't support gcc attributes, but, in many cases, doesn't
+ # complain either. Not all cases, though.
+ d_attribute_format='undef'
+ d_attribute_malloc='undef'
+ d_attribute_nonnull='undef'
+ d_attribute_noreturn='undef'
+ d_attribute_pure='undef'
+ d_attribute_unused='undef'
+ d_attribute_warn_unused_result='undef'
+ ;;
+esac
-#For RedHat Linux 3.0.3, you may need to fetch
-# ftp://ftp.redhat.com/pub/redhat-3.0.3/i386/updates/RPMS/ld.so-1.7.14-3.i386.rpm
-#
+case "$optimize" in
+# use -O2 by default ; -O3 doesn't seem to bring significant benefits with gcc
+'')
+ optimize='-O2'
+ case "$uname_minus_m" in
+ ppc*)
+ # on ppc, it seems that gcc (at least gcc 3.3.2) isn't happy
+ # with -O2 ; so downgrade to -O1.
+ optimize='-O1'
+ ;;
+ ia64*)
+ # This architecture has had various problems with gcc's
+ # in the 3.2, 3.3, and 3.4 releases when optimized to -O2. See
+ # RT #37156 for a discussion of the problem.
+ case "`${cc:-gcc} -v 2>&1`" in
+ *"version 3.2"*|*"version 3.3"*|*"version 3.4"*)
+ ccflags="-fno-delete-null-pointer-checks $ccflags"
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+esac
+# Ubuntu 11.04 (and later, presumably) doesn't keep most libraries
+# (such as -lm) in /lib or /usr/lib. So we have to ask gcc to tell us
+# where to look. We don't want gcc's own libraries, however, so we
+# filter those out.
+# This could be conditional on Unbuntu, but other distributions may
+# follow suit, and this scheme seems to work even on rather old gcc's.
+# This unconditionally uses gcc because even if the user is using another
+# compiler, we still need to find the math library and friends, and I don't
+# know how other compilers will cope with that situation.
+# Morever, if the user has their own gcc earlier in $PATH than the system gcc,
+# we don't want its libraries. So we try to prefer the system gcc
+# Still, as an escape hatch, allow Configure command line overrides to
+# plibpth to bypass this check.
+if [ -x /usr/bin/gcc ] ; then
+ gcc=/usr/bin/gcc
else
- cat <<'EOM' >&4
+ gcc=gcc
+fi
-You don't have an ELF gcc. I will use dld if possible. If you are
-using a version of DLD earlier than 3.2.6, or don't have it at all, you
-should probably upgrade. If you are forced to use 3.2.4, you should
-uncomment a couple of lines in hints/linux.sh and restart Configure so
-that shared libraries will be disallowed.
+case "$plibpth" in
+'') plibpth=`LANG=C LC_ALL=C $gcc $ccflags $ldflags -print-search-dirs | grep libraries |
+ cut -f2- -d= | tr ':' $trnl | grep -v 'gcc' | sed -e 's:/$::'`
+ set X $plibpth # Collapse all entries on one line
+ shift
+ plibpth="$*"
+ ;;
+esac
-EOM
- lddlflags="-r $lddlflags"
- # These empty values are so that Configure doesn't put in the
- # Linux ELF values.
- ccdlflags=' '
- cccdlflags=' '
- ccflags="-DOVR_DBL_DIG=14 $ccflags"
- so='sa'
- dlext='o'
- nm_so_opt=' '
- ## If you are using DLD 3.2.4 which does not support shared libs,
- ## uncomment the next two lines:
- #ldflags="-static"
- #so='none'
-
- # In addition, on some systems there is a problem with perl and NDBM
- # which causes AnyDBM and NDBM_File to lock up. This is evidenced
- # in the tests as AnyDBM just freezing. Apparently, this only
- # happens on a.out systems, so we disable NDBM for all a.out linux
- # systems. If someone can suggest a more robust test
- # that would be appreciated.
- #
- # More info:
- # Date: Wed, 7 Feb 1996 03:21:04 +0900
- # From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
- #
- # I tried compiling with DBM support and sure enough things locked up
- # just as advertised. Checking into it, I found that the lockup was
- # during the call to dbm_open. Not *in* dbm_open -- but between the call
- # to and the jump into.
- #
- # To make a long story short, making sure that the *.a and *.sa pairs of
- # /usr/lib/lib{m,db,gdbm}.{a,sa}
- # were perfectly in sync took care of it.
- #
- # This will generate a harmless Whoa There! message
- case "$d_dbm_open" in
- '') cat <<'EOM' >&4
-
-Disabling ndbm. This will generate a Whoa There message in Configure.
-Read hints/linux.sh for further information.
-EOM
- # You can override this with Configure -Dd_dbm_open
- d_dbm_open=undef
- ;;
- esac
-fi
+# libquadmath is sometimes installed as gcc internal library,
+# so contrary to our usual policy of *not* looking at gcc internal
+# directories we now *do* look at them, in case they contain
+# the quadmath library.
+# XXX This may apply to other gcc internal libraries, if such exist.
+# XXX This could be at Configure level, but then the $gcc is messy.
+case "$usequadmath" in
+"$define")
+ for d in `LANG=C LC_ALL=C $gcc $ccflags $ldflags -print-search-dirs | grep libraries | cut -f2- -d= | tr ':' $trnl | grep 'gcc' | sed -e 's:/$::'`
+ do
+ case `ls $d/*libquadmath*$so* 2>/dev/null` in
+ $d/*libquadmath*$so*) xlibpth="$xlibpth $d" ;;
+ esac
+ done
+ ;;
+esac
-rm -f try.c a.out
+case "$libc" in
+'')
+# If you have glibc, then report the version for ./myconfig bug reporting.
+# (Configure doesn't need to know the specific version since it just uses
+# gcc to load the library for all tests.)
+# We don't use __GLIBC__ and __GLIBC_MINOR__ because they
+# are insufficiently precise to distinguish things like
+# libc-2.0.6 and libc-2.0.7.
+ for p in $plibpth
+ do
+ for trylib in libc.so.6 libc.so
+ do
+ if $test -e $p/$trylib; then
+ libc=`ls -l $p/$trylib | awk '{print $NF}'`
+ if $test "X$libc" != X; then
+ break
+ fi
+ fi
+ done
+ if $test "X$libc" != X; then
+ break
+ fi
+ done
+ ;;
+esac
-if /bin/bash -c exit; then
+if ${sh:-/bin/sh} -c exit; then
echo ''
echo 'You appear to have a working bash. Good.'
else
# For this reason I suggest using the much bug-fixed tcsh for globbing
# where available.
-if [ ! "`csh -c 'echo $version' 2>/dev/null`" ]
-then
- echo 'Real csh found (might break); looking for tcsh ...'
- # Use ../UU/loc to find tcsh. (We run in the hints/ directory.)
- if xxx=`../UU/loc tcsh blurfl $pth`; $test -f "$xxx"; then
+# November 2001: That warning's pretty old now and probably not so
+# relevant, especially since perl now uses File::Glob for globbing.
+# We'll still look for tcsh, but tone down the warnings.
+# Andy Dougherty, Nov. 6, 2001
+if $csh -c 'echo $version' >/dev/null 2>&1; then
+ echo 'Your csh is really tcsh. Good.'
+else
+ if xxx=`./UU/loc tcsh blurfl $pth`; $test -f "$xxx"; then
echo "Found tcsh. I'll use it for globbing."
# We can't change Configure's setting of $csh, due to the way
# Configure handles $d_portable and commands found in $loclist.
# We can set the value for CSH in config.h by setting full_csh.
full_csh=$xxx
+ elif [ -f "$csh" ]; then
+ echo "Couldn't find tcsh. Csh-based globbing might be broken."
+ fi
+fi
+
+# Shimpei Yamashita <shimpei@socrates.patnet.caltech.edu>
+# Message-Id: <33EF1634.B36B6500@pobox.com>
+#
+# The DR2 of MkLinux (osname=linux,archname=ppc-linux) may need
+# special flags passed in order for dynamic loading to work.
+# instead of the recommended:
+#
+# ccdlflags='-rdynamic'
+#
+# it should be:
+# ccdlflags='-Wl,-E'
+#
+# So if your DR2 (DR3 came out summer 1998, consider upgrading)
+# has problems with dynamic loading, uncomment the
+# following three lines, make distclean, and re-Configure:
+#case "`uname -r | sed 's/^[0-9.-]*//'``arch`" in
+#'osfmach3ppc') ccdlflags='-Wl,-E' ;;
+#esac
+
+case "$uname_minus_m" in
+sparc*)
+ case "$cccdlflags" in
+ *-fpic*) cccdlflags="`echo $cccdlflags|sed 's/-fpic/-fPIC/'`" ;;
+ *-fPIC*) ;;
+ *) cccdlflags="$cccdlflags -fPIC" ;;
+ esac
+ ;;
+esac
+
+# SuSE8.2 has /usr/lib/libndbm* which are ld scripts rather than
+# true libraries. The scripts cause binding against static
+# version of -lgdbm which is a bad idea. So if we have 'nm'
+# make sure it can read the file
+# NI-S 2003/08/07
+case "$nm" in
+ '') ;;
+ *)
+ for p in $plibpth
+ do
+ if $test -r $p/libndbm.so; then
+ if $nm $p/libndbm.so >/dev/null 2>&1 ; then
+ echo 'Your shared -lndbm seems to be a real library.'
+ _libndbm_real=1
+ break
+ fi
+ fi
+ done
+ if $test "X$_libndbm_real" = X; then
+ echo 'Your shared -lndbm is not a real library.'
+ set `echo X "$libswanted "| sed -e 's/ ndbm / /'`
+ shift
+ libswanted="$*"
+ fi
+ ;;
+esac
+
+# Linux on Synology.
+if [ -f /etc/synoinfo.conf -a -d /usr/syno ]; then
+ # Tested on Synology DS213 and DS413
+ # OS version info in /etc.defaults/VERSION
+ # http://forum.synology.com/wiki/index.php/What_kind_of_CPU_does_my_NAS_have
+ # Synology DS213 running DSM 4.3-3810-0 (2013-11-06)
+ # CPU model Marvell Kirkwood mv6282 ARMv5te
+ # Linux 2.6.32.12 #3810 Wed Nov 6 05:13:41 CST 2013 armv5tel GNU/Linux
+ # Synology DS413 running DSM 4.3-3810-0 (2013-11-06)
+ # CPU model Freescale QorIQ P1022 ppc (e500v2)
+ # linux 2.6.32.12 #3810 ppc GNU/Linux
+ # All development stuff installed with ipkg is in /opt
+ if [ "$LANG" = "" -o "$LANG" = "C" ]; then
+ echo 'Your LANG is safe'
else
- echo "Couldn't find tcsh. BEWARE: GLOBBING MIGHT BE BROKEN."
+ echo 'Please set $LANG to "C". All other $LANG settings will cause havoc' >&4
+ LANG=C
fi
-else
- echo 'Your csh is really tcsh. Good.'
+ echo 'Setting up to use /opt/*' >&4
+ locincpth="/opt/include $locincpth"
+ libpth="/opt/lib $libpth"
+ libspth="/opt/lib $libspth"
+ loclibpth="/opt/lib $loclibpth"
+ # POSIX will not link without the pthread lib
+ libswanted="$libswanted pthread"
+ echo "$libswanted" >&4
fi
-if [ "X$usethreads" != "X" ]; then
- ccflags="-D_REENTRANT -DUSE_THREADS $ccflags"
- cppflags="-D_REENTRANT -DUSE_THREADS $cppflags"
- # -lpthread needs to come before -lc but after other libraries such
- # as -lgdbm and such like. We assume here that -lc is present in
- # libswanted. If that fails to be true in future, then this can be
- # changed to add pthread to the very end of libswanted.
- set `echo X "$libswanted "| sed -e 's/ c / pthread c /'`
+# This script UU/usethreads.cbu will get 'called-back' by Configure
+# after it has prompted the user for whether to use threads.
+cat > UU/usethreads.cbu <<'EOCBU'
+case "$usethreads" in
+$define|true|[yY]*)
+ ccflags="-D_REENTRANT -D_GNU_SOURCE $ccflags"
+ if echo $libswanted | grep -v pthread >/dev/null
+ then
+ set `echo X "$libswanted "| sed -e 's/ c / pthread c /'`
+ shift
+ libswanted="$*"
+ fi
+
+ # Somehow at least in Debian 2.2 these manage to escape
+ # the #define forest of <features.h> and <time.h> so that
+ # the hasproto macro of Configure doesn't see these protos,
+ # even with the -D_GNU_SOURCE.
+
+ d_asctime_r_proto="$define"
+ d_crypt_r_proto="$define"
+ d_ctime_r_proto="$define"
+ d_gmtime_r_proto="$define"
+ d_localtime_r_proto="$define"
+ d_random_r_proto="$define"
+
+ ;;
+esac
+EOCBU
+
+cat > UU/uselargefiles.cbu <<'EOCBU'
+# This script UU/uselargefiles.cbu will get 'called-back' by Configure
+# after it has prompted the user for whether to use large files.
+case "$uselargefiles" in
+''|$define|true|[yY]*)
+# Keep this in the left margin.
+ccflags_uselargefiles="-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64"
+
+ ccflags="$ccflags $ccflags_uselargefiles"
+ ;;
+esac
+EOCBU
+
+# Purify fails to link Perl if a "-lc" is passed into its linker
+# due to duplicate symbols.
+case "$PURIFY" in
+$define|true|[yY]*)
+ set `echo X "$libswanted "| sed -e 's/ c / /'`
shift
libswanted="$*"
+ ;;
+esac
+
+# If using g++, the Configure scan for dlopen() and (especially)
+# dlerror() might fail, easier just to forcibly hint them in.
+case "$cc" in
+*g++*)
+ d_dlopen='define'
+ d_dlerror='define'
+ ;;
+esac
+
+# Under some circumstances libdb can get built in such a way as to
+# need pthread explicitly linked.
+
+libdb_needs_pthread="N"
+
+if echo " $libswanted " | grep -v " pthread " >/dev/null
+then
+ if echo " $libswanted " | grep " db " >/dev/null
+ then
+ for DBDIR in $glibpth
+ do
+ DBLIB="$DBDIR/libdb.so"
+ if [ -f $DBLIB ]
+ then
+ if ${nm:-nm} -u $DBLIB 2>/dev/null | grep pthread >/dev/null
+ then
+ if ldd $DBLIB | grep pthread >/dev/null
+ then
+ libdb_needs_pthread="N"
+ else
+ libdb_needs_pthread="Y"
+ fi
+ fi
+ fi
+ done
+ fi
fi
+
+case "$libdb_needs_pthread" in
+ "Y")
+ libswanted="$libswanted pthread"
+ ;;
+esac