# hints/bsdos.sh
#
-# hints file for BSD/OS 2.x (adapted from bsd386.sh)
-# Original by Neil Bowers <neilb@khoros.unm.edu>
-# Tue Oct 4 12:01:34 EDT 1994
-# Updated by Tony Sanders <sanders@bsdi.com>
-# Mon Nov 27 17:25:51 CST 1995
+# hints file for BSD/OS (adapted from bsd386.sh)
+# Original by Neil Bowers <neilb@khoros.unm.edu>; Tue Oct 4 12:01:34 EDT 1994
+# Updated by Tony Sanders <sanders@bsdi.com>; Sat Aug 23 12:47:45 MDT 1997
+# Added 3.1 with ELF dynamic libraries (NOT in 3.1 yet.
+# Estimated for 4.0) SYSV IPC tested Ok so I re-enabled.
#
-# You can override the compiler and loader on the Configure command line:
-# ./Configure -Dcc=shlicc2 -Dld=shlicc2
-
-# filename extension for shared library objects
-so='o'
+# Updated to work in post-4.0 by Todd C. Miller <millert@openbsd.org>
+#
+# Updated for threads by "Timur I. Bakeyev" <bsdi@listserv.bat.ru>
+#
+# To override the compiler on the command line:
+# ./Configure -Dcc=gcc2
+#
+# The BSD/OS distribution is built with:
+# ./Configure -des -Dbsdos_distribution=defined
-# Don't use this for Perl 5.002, which needs parallel sig_name and sig_num lists
-#sig_name='ZERO HUP INT QUIT ILL TRAP IOT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM URG STOP TSTP CONT CHLD TTIN TTOU IO XCPU XFSZ VTALRM PROF WINCH INFO USR1 USR2 '
signal_t='void'
d_voidsig='define'
-d_dosuid='define'
+
+usemymalloc='n'
+
+# malloc wrap works
+case "$usemallocwrap" in
+'') usemallocwrap='define' ;;
+esac
+
+# setre?[ug]id() have been replaced by the _POSIX_SAVED_IDS versions.
+# See man 2 setuid
+d_setregid='undef'
+d_setreuid='undef'
+d_setrgid='undef'
+d_setruid='undef'
# we don't want to use -lnm, since exp() is busted (in 1.1 anyway)
set `echo X "$libswanted "| sed -e 's/ nm / /'`
shift
libswanted="$*"
-# BSD/OS X libraries are in their own tree
+# X libraries are in their own tree
glibpth="$glibpth /usr/X11/lib"
ldflags="$ldflags -L/usr/X11/lib"
-# Avoid telldir prototype conflict in pp_sys.c
-pp_sys_cflags='ccflags="$ccflags -DHAS_TELLDIR_PROTOTYPE"'
+case "$optimize" in
+'') optimize='-O2' ;;
+esac
case "$bsdos_distribution" in
-defined)
- d_portable='no'
+''|undef|false) ;;
+*)
+ d_dosuid='define'
+ d_portable='undef'
prefix='/usr/contrib'
+ perlpath='/usr/bin/perl5'
+ startperl='#!/usr/bin/perl5'
+ scriptdir='/usr/contrib/bin'
+ privlib='/usr/libdata/perl5'
+ man1dir='/usr/contrib/man/man1'
man3dir='/usr/contrib/man/man3'
+ # phlib added by BSDI -- we share the *.ph include dir with perl4
+ phlib="/usr/libdata/perl5/site_perl/$(arch)-$osname/include"
+ phlibexp="/usr/libdata/perl5/site_perl/$(arch)-$osname/include"
;;
esac
'') cc='gcc2' ;;
esac
;;
-2.0*)
+2.0*|2.1*|3.0*|3.1*)
+ so='o'
+
# default to GCC 2.X w/shared libraries
case "$cc" in
- '') cc='shlicc2' ;;
+ '') cc='shlicc2'
+ cccdlflags=' ' ;; # Avoid the dreaded -fpic
esac
# default ld to shared library linker
case "$ld" in
- '') ld='shlicc2' ;;
+ '') ld='shlicc2'
+ lddlflags='-r' ;; # this one is necessary
esac
- # setre?[ug]id() have been replaced by the _POSIX_SAVED_IDS stuff
- # in 4.4BSD-based systems (including BSD/OS 2.0 and later).
- # See http://www.bsdi.com/bsdi-man?setuid(2)
- d_setregid='undef'
- d_setreuid='undef'
- d_setrgid='undef'
- d_setruid='undef'
+ # Must preload the static shared libraries.
+ libswanted="Xpm Xaw Xmu Xt SM ICE Xext X11 $libswanted"
+ libswanted="rpc curses termcap $libswanted"
;;
-2.1*)
- # Use 2.1's shlicc2 for dynamic linking
- # Since cc -o is linking, use it for compiling too.
- # I'm not sure whether Configure is careful about
- # distinguishing between the two.
+4.*)
+ # ELF dynamic link libraries starting in 4.0
+ useshrplib='true'
+ so='so'
+ dlext='so'
case "$cc" in
- '') cc='shlicc2'
- cccdlflags=' ' ;; # Avoid the dreaded -fpic
+ '') cc='cc' # cc is gcc2 in 4.0
+ cccdlflags="-fPIC"
+ ;;
esac
- # Link with shared libraries in 2.1
- # Turns out that shlicc2 will automatically use the
- # shared libs, so don't explicitly specify -lc_s.2.1.*
case "$ld" in
- '') ld='shlicc2'
- lddlflags='-r' ;; # this one is necessary
+ '') ld='ld'
+ lddlflags="-shared -x $lddlflags" ;;
esac
+ # Due usage of static pointer from crt.o
+ libswanted="util $libswanted" ;;
+esac
- # setre?[ug]id() have been replaced by the _POSIX_SAVED_IDS stuff
- # in 4.4BSD-based systems (including BSD/OS 2.0 and later).
- # See http://www.bsdi.com/bsdi-man?setuid(2)
- # This stuff may or may not be right, but it works.
- d_setregid='undef'
- d_setreuid='undef'
- d_setrgid='undef'
- d_setruid='undef'
+# This script UU/usethreads.cbu will get 'called-back' by Configure
+# after it has prompted the user for whether to use threads.
+cat > UU/usethreads.cbu <<'EOCBU'
+case "$usethreads" in
+$define|true|[yY]*)
+ case "$osvers" in
+ 3.*|4.*) ccflags="-D_REENTRANT -D_THREAD_SAFE -pthread $ccflags"
+ ;;
+ *) cat <<EOM >&4
+I did not know that BSD/OS $osvers supports POSIX threads.
+
+Feel free to tell perlbug@perl.org otherwise.
+EOM
+ exit 1
+ ;;
+ esac
;;
esac
+EOCBU
https://perl5.git.perl.org / perl5.git / blobdiff