+/* Windows requres a customized base-level setlocale() */
+#ifdef WIN32
+# define my_setlocale(cat, locale) win32_setlocale(cat, locale)
+#else
+# define my_setlocale(cat, locale) setlocale(cat, locale)
+#endif
+
+#ifndef USE_POSIX_2008_LOCALE
+
+/* "do_setlocale_c" is intended to be called when the category is a constant
+ * known at compile time; "do_setlocale_r", not known until run time */
+# define do_setlocale_c(cat, locale) my_setlocale(cat, locale)
+# define do_setlocale_r(cat, locale) my_setlocale(cat, locale)
+
+#else /* Below uses POSIX 2008 */
+
+/* We emulate setlocale with our own function. LC_foo is not valid for the
+ * POSIX 2008 functions. Instead LC_foo_MASK is used, which we use an array
+ * lookup to convert to. At compile time we have defined LC_foo_INDEX as the
+ * proper offset into the array 'category_masks[]'. At runtime, we have to
+ * search through the array (as the actual numbers may not be small contiguous
+ * positive integers which would lend themselves to array lookup). */
+# define do_setlocale_c(cat, locale) \
+ emulate_setlocale(cat, locale, cat ## _INDEX, TRUE)
+# define do_setlocale_r(cat, locale) emulate_setlocale(cat, locale, 0, FALSE)
+
+/* A third array, parallel to the ones above to map from category to its
+ * equivalent mask */
+const int category_masks[] = {
+# ifdef USE_LOCALE_NUMERIC
+ LC_NUMERIC_MASK,
+# endif
+# ifdef USE_LOCALE_CTYPE
+ LC_CTYPE_MASK,
+# endif
+# ifdef USE_LOCALE_COLLATE
+ LC_COLLATE_MASK,
+# endif
+# ifdef USE_LOCALE_TIME
+ LC_TIME_MASK,
+# endif
+# ifdef USE_LOCALE_MESSAGES
+ LC_MESSAGES_MASK,
+# endif
+# ifdef USE_LOCALE_MONETARY
+ LC_MONETARY_MASK,
+# endif
+# ifdef USE_LOCALE_ADDRESS
+ LC_ADDRESS_MASK,
+# endif
+# ifdef USE_LOCALE_IDENTIFICATION
+ LC_IDENTIFICATION_MASK,
+# endif
+# ifdef USE_LOCALE_MEASUREMENT
+ LC_MEASUREMENT_MASK,
+# endif
+# ifdef USE_LOCALE_PAPER
+ LC_PAPER_MASK,
+# endif
+# ifdef USE_LOCALE_TELEPHONE
+ LC_TELEPHONE_MASK,
+# endif
+ /* LC_ALL can't be turned off by a Configure
+ * option, and in Posix 2008, should always be
+ * here, so compile it in unconditionally.
+ * This could catch some glitches at compile
+ * time */
+ LC_ALL_MASK
+ };
+
+STATIC const char *
+S_emulate_setlocale(const int category,
+ const char * locale,
+ unsigned int index,
+ const bool is_index_valid
+ )
+{
+ /* This function effectively performs a setlocale() on just the current
+ * thread; thus it is thread-safe. It does this by using the POSIX 2008
+ * locale functions to emulate the behavior of setlocale(). Similar to
+ * regular setlocale(), the return from this function points to memory that
+ * can be overwritten by other system calls, so needs to be copied
+ * immediately if you need to retain it. The difference here is that
+ * system calls besides another setlocale() can overwrite it.
+ *
+ * By doing this, most locale-sensitive functions become thread-safe. The
+ * exceptions are mostly those that return a pointer to static memory.
+ *
+ * This function takes the same parameters, 'category' and 'locale', that
+ * the regular setlocale() function does, but it also takes two additional
+ * ones. This is because the 2008 functions don't use a category; instead
+ * they use a corresponding mask. Because this function operates in both
+ * worlds, it may need one or the other or both. This function can
+ * calculate the mask from the input category, but to avoid this
+ * calculation, if the caller knows at compile time what the mask is, it
+ * can pass it, setting 'is_index_valid' to TRUE; otherwise the mask
+ * parameter is ignored.
+ *
+ * POSIX 2008, for some sick reason, chose not to provide a method to find
+ * the category name of a locale. Some vendors have created a
+ * querylocale() function to do just that. This function is a lot simpler
+ * to implement on systems that have this. Otherwise, we have to keep
+ * track of what the locale has been set to, so that we can return its
+ * name to emulate setlocale(). It's also possible for C code in some
+ * library to change the locale without us knowing it, though as of
+ * September 2017, there are no occurrences in CPAN of uselocale(). Some
+ * libraries do use setlocale(), but that changes the global locale, and
+ * threads using per-thread locales will just ignore those changes.
+ * Another problem is that without querylocale(), we have to guess at what
+ * was meant by setting a locale of "". We handle this by not actually
+ * ever setting to "" (unless querylocale exists), but to emulate what we
+ * think should happen for "".
+ */
+
+ int mask;
+ locale_t old_obj;
+ locale_t new_obj;
+ dTHX;
+
+# ifdef DEBUGGING
+
+ if (DEBUG_Lv_TEST || debug_initialization) {
+ PerlIO_printf(Perl_debug_log, "%s:%d: emulate_setlocale input=%d (%s), \"%s\", %d, %d\n", __FILE__, __LINE__, category, category_name(category), locale, index, is_index_valid);
+ }
+
+# endif
+
+ /* If the input mask might be incorrect, calculate the correct one */
+ if (! is_index_valid) {
+ unsigned int i;
+
+# ifdef DEBUGGING
+
+ if (DEBUG_Lv_TEST || debug_initialization) {
+ PerlIO_printf(Perl_debug_log, "%s:%d: finding index of category %d (%s)\n", __FILE__, __LINE__, category, category_name(category));
+ }
+
+# endif
+
+ for (i = 0; i <= LC_ALL_INDEX; i++) {
+ if (category == categories[i]) {
+ index = i;
+ goto found_index;
+ }
+ }
+
+ /* Here, we don't know about this category, so can't handle it.
+ * Fallback to the early POSIX usages */
+ Perl_warner(aTHX_ packWARN(WARN_LOCALE),
+ "Unknown locale category %d; can't set it to %s\n",
+ category, locale);
+ return NULL;
+
+ found_index: ;
+
+# ifdef DEBUGGING
+
+ if (DEBUG_Lv_TEST || debug_initialization) {
+ PerlIO_printf(Perl_debug_log, "%s:%d: index is %d for %s\n", __FILE__, __LINE__, index, category_name(category));
+ }
+
+# endif
+
+ }
+
+ mask = category_masks[index];
+
+# ifdef DEBUGGING
+
+ if (DEBUG_Lv_TEST || debug_initialization) {
+ PerlIO_printf(Perl_debug_log, "%s:%d: category name is %s; mask is 0x%x\n", __FILE__, __LINE__, category_names[index], mask);
+ }
+
+# endif
+
+ /* If just querying what the existing locale is ... */
+ if (locale == NULL) {
+ locale_t cur_obj = uselocale((locale_t) 0);
+
+# ifdef DEBUGGING
+
+ if (DEBUG_Lv_TEST || debug_initialization) {
+ PerlIO_printf(Perl_debug_log, "%s:%d: emulate_setlocale querying %p\n", __FILE__, __LINE__, cur_obj);
+ }
+
+# endif
+
+ if (cur_obj == LC_GLOBAL_LOCALE) {
+ return my_setlocale(category, NULL);
+ }
+
+# ifdef HAS_QUERYLOCALE
+
+ return (char *) querylocale(mask, cur_obj);
+
+# else
+
+ /* If this assert fails, adjust the size of curlocales in intrpvar.h */
+ STATIC_ASSERT_STMT(C_ARRAY_LENGTH(PL_curlocales) > LC_ALL_INDEX);
+
+# if defined(_NL_LOCALE_NAME) && defined(DEBUGGING)
+
+ {
+ /* Internal glibc for querylocale(), but doesn't handle
+ * empty-string ("") locale properly; who knows what other
+ * glitches. Check it for now, under debug. */
+
+ char * temp_name = nl_langinfo_l(_NL_LOCALE_NAME(category),
+ uselocale((locale_t) 0));
+ /*
+ PerlIO_printf(Perl_debug_log, "%s:%d: temp_name=%s\n", __FILE__, __LINE__, temp_name ? temp_name : "NULL");
+ PerlIO_printf(Perl_debug_log, "%s:%d: index=%d\n", __FILE__, __LINE__, index);
+ PerlIO_printf(Perl_debug_log, "%s:%d: PL_curlocales[index]=%s\n", __FILE__, __LINE__, PL_curlocales[index]);
+ */
+ if (temp_name && PL_curlocales[index] && strNE(temp_name, "")) {
+ if ( strNE(PL_curlocales[index], temp_name)
+ && ! ( isNAME_C_OR_POSIX(temp_name)
+ && isNAME_C_OR_POSIX(PL_curlocales[index]))) {
+
+# ifdef USE_C_BACKTRACE
+
+ dump_c_backtrace(Perl_debug_log, 20, 1);
+
+# endif
+
+ Perl_croak(aTHX_ "panic: Mismatch between what Perl thinks %s is"
+ " (%s) and what internal glibc thinks"
+ " (%s)\n", category_names[index],
+ PL_curlocales[index], temp_name);
+ }
+
+ return temp_name;
+ }
+ }
+
+# endif
+
+ /* Without querylocale(), we have to use our record-keeping we've
+ * done. */
+
+ if (category != LC_ALL) {
+
+# ifdef DEBUGGING
+
+ if (DEBUG_Lv_TEST || debug_initialization) {
+ PerlIO_printf(Perl_debug_log, "%s:%d: emulate_setlocale returning %s\n", __FILE__, __LINE__, PL_curlocales[index]);
+ }
+
+# endif
+
+ return PL_curlocales[index];
+ }
+ else { /* For LC_ALL */
+ unsigned int i;
+ Size_t names_len = 0;
+ char * all_string;
+ bool are_all_categories_the_same_locale = TRUE;
+
+ /* If we have a valid LC_ALL value, just return it */
+ if (PL_curlocales[LC_ALL_INDEX]) {
+
+# ifdef DEBUGGING
+
+ if (DEBUG_Lv_TEST || debug_initialization) {
+ PerlIO_printf(Perl_debug_log, "%s:%d: emulate_setlocale returning %s\n", __FILE__, __LINE__, PL_curlocales[LC_ALL_INDEX]);
+ }
+
+# endif
+
+ return PL_curlocales[LC_ALL_INDEX];
+ }
+
+ /* Otherwise, we need to construct a string of name=value pairs.
+ * We use the glibc syntax, like
+ * LC_NUMERIC=C;LC_TIME=en_US.UTF-8;...
+ * First calculate the needed size. Along the way, check if all
+ * the locale names are the same */
+ for (i = 0; i < LC_ALL_INDEX; i++) {
+
+# ifdef DEBUGGING
+
+ if (DEBUG_Lv_TEST || debug_initialization) {
+ PerlIO_printf(Perl_debug_log, "%s:%d: emulate_setlocale i=%d, name=%s, locale=%s\n", __FILE__, __LINE__, i, category_names[i], PL_curlocales[i]);
+ }
+
+# endif
+
+ names_len += strlen(category_names[i])
+ + 1 /* '=' */
+ + strlen(PL_curlocales[i])
+ + 1; /* ';' */
+
+ if (i > 0 && strNE(PL_curlocales[i], PL_curlocales[i-1])) {
+ are_all_categories_the_same_locale = FALSE;
+ }
+ }
+
+ /* If they are the same, we don't actually have to construct the
+ * string; we just make the entry in LC_ALL_INDEX valid, and be
+ * that single name */
+ if (are_all_categories_the_same_locale) {
+ PL_curlocales[LC_ALL_INDEX] = savepv(PL_curlocales[0]);
+ return PL_curlocales[LC_ALL_INDEX];
+ }
+
+ names_len++; /* Trailing '\0' */
+ SAVEFREEPV(Newx(all_string, names_len, char));
+ *all_string = '\0';
+
+ /* Then fill in the string */
+ for (i = 0; i < LC_ALL_INDEX; i++) {
+
+# ifdef DEBUGGING
+
+ if (DEBUG_Lv_TEST || debug_initialization) {
+ PerlIO_printf(Perl_debug_log, "%s:%d: emulate_setlocale i=%d, name=%s, locale=%s\n", __FILE__, __LINE__, i, category_names[i], PL_curlocales[i]);
+ }
+
+# endif
+
+ my_strlcat(all_string, category_names[i], names_len);
+ my_strlcat(all_string, "=", names_len);
+ my_strlcat(all_string, PL_curlocales[i], names_len);
+ my_strlcat(all_string, ";", names_len);
+ }
+
+# ifdef DEBUGGING
+
+ if (DEBUG_L_TEST || debug_initialization) {
+ PerlIO_printf(Perl_debug_log, "%s:%d: emulate_setlocale returning %s\n", __FILE__, __LINE__, all_string);
+ }
+
+ #endif
+
+ return all_string;
+ }
+
+# ifdef EINVAL
+
+ SETERRNO(EINVAL, LIB_INVARG);
+
+# endif
+
+ return NULL;
+
+# endif
+
+ }
+
+ assert(PL_C_locale_obj);
+
+ /* Otherwise, we are switching locales. This will generally entail freeing
+ * the current one's space (at the C library's discretion). We need to
+ * stop using that locale before the switch. So switch to a known locale
+ * object that we don't otherwise mess with. This returns the locale
+ * object in effect at the time of the switch. */
+ old_obj = uselocale(PL_C_locale_obj);
+
+# ifdef DEBUGGING
+
+ if (DEBUG_Lv_TEST || debug_initialization) {
+ PerlIO_printf(Perl_debug_log, "%s:%d: emulate_setlocale was using %p\n", __FILE__, __LINE__, old_obj);
+ }
+
+# endif
+
+ if (! old_obj) {
+
+# ifdef DEBUGGING
+
+ if (DEBUG_L_TEST || debug_initialization) {
+ dSAVE_ERRNO;
+ PerlIO_printf(Perl_debug_log, "%s:%d: emulate_setlocale switching to C failed: %d\n", __FILE__, __LINE__, GET_ERRNO);
+ RESTORE_ERRNO;
+ }
+
+# endif
+
+ return NULL;
+ }
+
+# ifdef DEBUGGING
+
+ if (DEBUG_Lv_TEST || debug_initialization) {
+ PerlIO_printf(Perl_debug_log, "%s:%d: emulate_setlocale now using %p\n", __FILE__, __LINE__, PL_C_locale_obj);
+ }
+
+# endif
+
+ /* If we weren't in a thread safe locale, set so that newlocale() below
+ which uses 'old_obj', uses an empty one. Same for our reserved C object.
+ The latter is defensive coding, so that, even if there is some bug, we
+ will never end up trying to modify either of these, as if passed to
+ newlocale(), they can be. */
+ if (old_obj == LC_GLOBAL_LOCALE || old_obj == PL_C_locale_obj) {
+ old_obj = (locale_t) 0;
+ }
+
+ /* Create the new locale (it may actually modify the current one). */
+
+# ifndef HAS_QUERYLOCALE
+
+ if (strEQ(locale, "")) {
+
+ /* For non-querylocale() systems, we do the setting of "" ourselves to
+ * be sure that we really know what's going on. We follow the Linux
+ * documented behavior (but if that differs from the actual behavior,
+ * this won't work exactly as the OS implements). We go out and
+ * examine the environment based on our understanding of how the system
+ * works, and use that to figure things out */
+
+ const char * const lc_all = PerlEnv_getenv("LC_ALL");
+
+ /* Use any "LC_ALL" environment variable, as it overrides everything
+ * else. */
+ if (lc_all && strNE(lc_all, "")) {
+ locale = lc_all;
+ }
+ else {
+
+ /* Otherwise, we need to dig deeper. Unless overridden, the
+ * default is the LANG environment variable; if it doesn't exist,
+ * then "C" */
+
+ const char * default_name;
+
+ /* To minimize other threads messing with the environment, we copy
+ * the variable, making it a temporary. But this doesn't work upon
+ * program initialization before any scopes are created, and at
+ * this time, there's nothing else going on that would interfere.
+ * So skip the copy in that case */
+ if (PL_scopestack_ix == 0) {
+ default_name = PerlEnv_getenv("LANG");
+ }
+ else {
+ default_name = savepv(PerlEnv_getenv("LANG"));
+ }
+
+ if (! default_name || strEQ(default_name, "")) {
+ default_name = "C";
+ }
+ else if (PL_scopestack_ix != 0) {
+ SAVEFREEPV(default_name);
+ }
+
+ if (category != LC_ALL) {
+ const char * const name = PerlEnv_getenv(category_names[index]);
+
+ /* Here we are setting a single category. Assume will have the
+ * default name */
+ locale = default_name;
+
+ /* But then look for an overriding environment variable */
+ if (name && strNE(name, "")) {
+ locale = name;
+ }
+ }
+ else {
+ bool did_override = FALSE;
+ unsigned int i;
+
+ /* Here, we are getting LC_ALL. Any categories that don't have
+ * a corresponding environment variable set should be set to
+ * LANG, or to "C" if there is no LANG. If no individual
+ * categories differ from this, we can just set LC_ALL. This
+ * is buggy on systems that have extra categories that we don't
+ * know about. If there is an environment variable that sets
+ * that category, we won't know to look for it, and so our use
+ * of LANG or "C" improperly overrides it. On the other hand,
+ * if we don't do what is done here, and there is no
+ * environment variable, the category's locale should be set to
+ * LANG or "C". So there is no good solution. khw thinks the
+ * best is to look at systems to see what categories they have,
+ * and include them, and then to assume that we know the
+ * complete set */
+
+ for (i = 0; i < LC_ALL_INDEX; i++) {
+ const char * const env_override
+ = savepv(PerlEnv_getenv(category_names[i]));
+ const char * this_locale = ( env_override
+ && strNE(env_override, ""))
+ ? env_override
+ : default_name;
+ emulate_setlocale(categories[i], this_locale, i, TRUE);
+
+ if (strNE(this_locale, default_name)) {
+ did_override = TRUE;
+ }
+
+ Safefree(env_override);
+ }
+
+ /* If all the categories are the same, we can set LC_ALL to
+ * that */
+ if (! did_override) {
+ locale = default_name;
+ }
+ else {
+
+ /* Here, LC_ALL is no longer valid, as some individual
+ * categories don't match it. We call ourselves
+ * recursively, as that will execute the code that
+ * generates the proper locale string for this situation.
+ * We don't do the remainder of this function, as that is
+ * to update our records, and we've just done that for the
+ * individual categories in the loop above, and doing so
+ * would cause LC_ALL to be done as well */
+ return emulate_setlocale(LC_ALL, NULL, LC_ALL_INDEX, TRUE);
+ }
+ }
+ }
+ }
+ else if (strchr(locale, ';')) {
+
+ /* LC_ALL may actually incude a conglomeration of various categories.
+ * Without querylocale, this code uses the glibc (as of this writing)
+ * syntax for representing that, but that is not a stable API, and
+ * other platforms do it differently, so we have to handle all cases
+ * ourselves */
+
+ const char * s = locale;
+ const char * e = locale + strlen(locale);
+ const char * p = s;
+ const char * category_end;
+ const char * name_start;
+ const char * name_end;
+
+ while (s < e) {
+ unsigned int i;
+
+ /* Parse through the category */
+ while (isWORDCHAR(*p)) {
+ p++;
+ }
+ category_end = p;
+
+ if (*p++ != '=') {
+ Perl_croak(aTHX_
+ "panic: %s: %d: Unexpected character in locale name '%02X",
+ __FILE__, __LINE__, *(p-1));
+ }
+
+ /* Parse through the locale name */
+ name_start = p;
+ while (isGRAPH(*p) && *p != ';') {
+ p++;
+ }
+ name_end = p;
+
+ if (*p++ != ';') {
+ Perl_croak(aTHX_
+ "panic: %s: %d: Unexpected character in locale name '%02X",
+ __FILE__, __LINE__, *(p-1));
+ }
+
+ /* Find the index of the category name in our lists */
+ for (i = 0; i < LC_ALL_INDEX; i++) {
+
+ /* Keep going if this isn't the index. The strnNE() avoids a
+ * Perl_form(), but would fail if ever a category name could be
+ * a substring of another one, like if there were a
+ * "LC_TIME_DATE" */
+ if strnNE(s, category_names[i], category_end - s) {
+ continue;
+ }
+
+ /* If this index is for the single category we're changing, we
+ * have found the locale to set it to. */
+ if (category == categories[i]) {
+ locale = Perl_form(aTHX_ "%.*s",
+ (int) (name_end - name_start),
+ name_start);
+ goto ready_to_set;
+ }
+
+ if (category == LC_ALL) {
+ char * individ_locale = Perl_form(aTHX_ "%.*s", (int) (p - s), s);
+ emulate_setlocale(categories[i], individ_locale, i, TRUE);
+ }
+ }
+
+ s = p;
+ }
+
+ /* Here we have set all the individual categories by recursive calls.
+ * These collectively should have fixed up LC_ALL, so can just query
+ * what that now is */
+ assert(category == LC_ALL);
+
+ return do_setlocale_c(LC_ALL, NULL);
+ }
+
+ ready_to_set: ;
+
+# endif /* end of ! querylocale */
+
+ /* Ready to create a new locale by modification of the exising one */
+ new_obj = newlocale(mask, locale, old_obj);
+
+ if (! new_obj) {
+ dSAVE_ERRNO;
+
+# ifdef DEBUGGING
+
+ if (DEBUG_L_TEST || debug_initialization) {
+ PerlIO_printf(Perl_debug_log, "%s:%d: emulate_setlocale creating new object failed: %d\n", __FILE__, __LINE__, GET_ERRNO);
+ }
+
+# endif
+
+ if (! uselocale(old_obj)) {
+
+# ifdef DEBUGGING
+
+ if (DEBUG_L_TEST || debug_initialization) {
+ PerlIO_printf(Perl_debug_log, "%s:%d: switching back failed: %d\n", __FILE__, __LINE__, GET_ERRNO);
+ }
+
+# endif
+
+ }
+ RESTORE_ERRNO;
+ return NULL;
+ }
+
+# ifdef DEBUGGING
+
+ if (DEBUG_Lv_TEST || debug_initialization) {
+ PerlIO_printf(Perl_debug_log, "%s:%d: emulate_setlocale created %p\n", __FILE__, __LINE__, new_obj);
+ }
+
+# endif
+
+ /* And switch into it */
+ if (! uselocale(new_obj)) {
+ dSAVE_ERRNO;
+
+# ifdef DEBUGGING
+
+ if (DEBUG_L_TEST || debug_initialization) {
+ PerlIO_printf(Perl_debug_log, "%s:%d: emulate_setlocale switching to new object failed\n", __FILE__, __LINE__);
+ }
+
+# endif
+
+ if (! uselocale(old_obj)) {
+
+# ifdef DEBUGGING
+
+ if (DEBUG_L_TEST || debug_initialization) {
+ PerlIO_printf(Perl_debug_log, "%s:%d: switching back failed: %d\n", __FILE__, __LINE__, GET_ERRNO);
+ }
+
+# endif
+
+ }
+ freelocale(new_obj);
+ RESTORE_ERRNO;
+ return NULL;
+ }
+
+# ifdef DEBUGGING
+
+ if (DEBUG_Lv_TEST || debug_initialization) {
+ PerlIO_printf(Perl_debug_log, "%s:%d: emulate_setlocale now using %p\n", __FILE__, __LINE__, new_obj);
+ }
+
+# endif
+
+ /* We are done, except for updating our records (if the system doesn't keep
+ * them) and in the case of locale "", we don't actually know what the
+ * locale that got switched to is, as it came from the environment. So
+ * have to find it */
+
+# ifdef HAS_QUERYLOCALE
+
+ if (strEQ(locale, "")) {
+ locale = querylocale(mask, new_obj);
+ }
+
+# else
+
+ /* Here, 'locale' is the return value */
+
+ /* Without querylocale(), we have to update our records */
+
+ if (category == LC_ALL) {
+ unsigned int i;
+
+ /* For LC_ALL, we change all individual categories to correspond */
+ /* PL_curlocales is a parallel array, so has same
+ * length as 'categories' */
+ for (i = 0; i <= LC_ALL_INDEX; i++) {
+ Safefree(PL_curlocales[i]);
+ PL_curlocales[i] = savepv(locale);
+ }
+ }
+ else {
+
+ /* For a single category, if it's not the same as the one in LC_ALL, we
+ * nullify LC_ALL */
+
+ if (PL_curlocales[LC_ALL_INDEX] && strNE(PL_curlocales[LC_ALL_INDEX], locale)) {
+ Safefree(PL_curlocales[LC_ALL_INDEX]);
+ PL_curlocales[LC_ALL_INDEX] = NULL;
+ }
+
+ /* Then update the category's record */
+ Safefree(PL_curlocales[index]);
+ PL_curlocales[index] = savepv(locale);
+ }
+
+# endif
+
+ return locale;
+}
+
+#endif /* USE_POSIX_2008_LOCALE */
+
+#if 0 /* Code that was to emulate thread-safe locales on platforms that
+ didn't natively support them */
+
+/* The way this would work is that we would keep a per-thread list of the
+ * correct locale for that thread. Any operation that was locale-sensitive
+ * would have to be changed so that it would look like this:
+ *
+ * LOCALE_LOCK;
+ * setlocale to the correct locale for this operation
+ * do operation
+ * LOCALE_UNLOCK
+ *
+ * This leaves the global locale in the most recently used operation's, but it
+ * was locked long enough to get the result. If that result is static, it
+ * needs to be copied before the unlock.
+ *
+ * Macros could be written like SETUP_LOCALE_DEPENDENT_OP(category) that did
+ * the setup, but are no-ops when not needed, and similarly,
+ * END_LOCALE_DEPENDENT_OP for the tear-down
+ *
+ * But every call to a locale-sensitive function would have to be changed, and
+ * if a module didn't cooperate by using the mutex, things would break.
+ *
+ * This code was abandoned before being completed or tested, and is left as-is
+*/
+
+# define do_setlocale_c(cat, locale) locking_setlocale(cat, locale, cat ## _INDEX, TRUE)
+# define do_setlocale_r(cat, locale) locking_setlocale(cat, locale, 0, FALSE)
+
+STATIC char *
+S_locking_setlocale(pTHX_
+ const int category,
+ const char * locale,
+ int index,
+ const bool is_index_valid
+ )
+{
+ /* This function kind of performs a setlocale() on just the current thread;
+ * thus it is kind of thread-safe. It does this by keeping a thread-level
+ * array of the current locales for each category. Every time a locale is
+ * switched to, it does the switch globally, but updates the thread's
+ * array. A query as to what the current locale is just returns the
+ * appropriate element from the array, and doesn't actually call the system
+ * setlocale(). The saving into the array is done in an uninterruptible
+ * section of code, so is unaffected by whatever any other threads might be
+ * doing.
+ *
+ * All locale-sensitive operations must work by first starting a critical
+ * section, then switching to the thread's locale as kept by this function,
+ * and then doing the operation, then ending the critical section. Thus,
+ * each gets done in the appropriate locale. simulating thread-safety.
+ *
+ * This function takes the same parameters, 'category' and 'locale', that
+ * the regular setlocale() function does, but it also takes two additional
+ * ones. This is because as described earlier. If we know on input the
+ * index corresponding to the category into the array where we store the
+ * current locales, we don't have to calculate it. If the caller knows at
+ * compile time what the index is, it it can pass it, setting
+ * 'is_index_valid' to TRUE; otherwise the index parameter is ignored.
+ *
+ */
+
+ /* If the input index might be incorrect, calculate the correct one */
+ if (! is_index_valid) {
+ unsigned int i;
+
+ if (DEBUG_Lv_TEST || debug_initialization) {
+ PerlIO_printf(Perl_debug_log, "%s:%d: converting category %d to index\n", __FILE__, __LINE__, category);
+ }
+
+ for (i = 0; i <= LC_ALL_INDEX; i++) {
+ if (category == categories[i]) {
+ index = i;
+ goto found_index;
+ }
+ }
+
+ /* Here, we don't know about this category, so can't handle it.
+ * XXX best we can do is to unsafely set this
+ * XXX warning */
+
+ return my_setlocale(category, locale);
+
+ found_index: ;
+
+ if (DEBUG_Lv_TEST || debug_initialization) {
+ PerlIO_printf(Perl_debug_log, "%s:%d: index is 0x%x\n", __FILE__, __LINE__, index);
+ }
+ }
+
+ /* For a query, just return what's in our records */
+ if (new_locale == NULL) {
+ return curlocales[index];
+ }
+
+
+ /* Otherwise, we need to do the switch, and save the result, all in a
+ * critical section */
+
+ Safefree(curlocales[[index]]);
+
+ /* It might be that this is called from an already-locked section of code.
+ * We would have to detect and skip the LOCK/UNLOCK if so */
+ LOCALE_LOCK;
+
+ curlocales[index] = savepv(my_setlocale(category, new_locale));
+
+ if (strEQ(new_locale, "")) {
+
+#ifdef LC_ALL
+
+ /* The locale values come from the environment, and may not all be the
+ * same, so for LC_ALL, we have to update all the others, while the
+ * mutex is still locked */
+
+ if (category == LC_ALL) {
+ unsigned int i;
+ for (i = 0; i < LC_ALL_INDEX) {
+ curlocales[i] = my_setlocale(categories[i], NULL);
+ }
+ }
+ }
https://perl5.git.perl.org / perl5.git / blobdiff