+case "$CONFIG_SH" in
+'') CONFIG_SH=config.sh ;;
+esac
+case "$CONFIG_H" in
+'') CONFIG_H=config.h ;;
+esac
case $CONFIG in
'')
- if test -f config.sh; then TOP=.;
- elif test -f ../config.sh; then TOP=..;
- elif test -f ../../config.sh; then TOP=../..;
- elif test -f ../../../config.sh; then TOP=../../..;
- elif test -f ../../../../config.sh; then TOP=../../../..;
+ if test -f $CONFIG_SH; then TOP=.;
+ elif test -f ../$CONFIG_SH; then TOP=..;
+ elif test -f ../../$CONFIG_SH; then TOP=../..;
+ elif test -f ../../../$CONFIG_SH; then TOP=../../..;
+ elif test -f ../../../../$CONFIG_SH; then TOP=../../../..;
else
- echo "Can't find config.sh."; exit 1
+ echo "Can't find $CONFIG_SH."; exit 1
fi
- . $TOP/config.sh
+ . $TOP/$CONFIG_SH
;;
esac
case "$0" in
*/*) cd `expr X$0 : 'X\(.*\)/'` ;;
esac
-echo "Extracting config.h (with variable substitutions)"
-sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-def!#undef!'
+echo "Extracting $CONFIG_H (with variable substitutions)"
+sed <<!GROK!THIS! >$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-def!#undef!'
/*
* This file was produced by running the config_h.SH script, which
- * gets its values from config.sh, which is generally produced by
+ * gets its values from $CONFIG_SH, which is generally produced by
* running Configure.
*
* Feel free to modify any of this as the need arises. Note, however,
* that running config_h.SH again will wipe out any changes you've made.
- * For a more permanent change edit config.sh and rerun config_h.SH.
+ * For a more permanent change edit $CONFIG_SH and rerun config_h.SH.
*
* \$Id: Config_h.U,v 3.0.1.5 1997/02/28 14:57:43 ram Exp $
*/
*/
#$d_getpgid HAS_GETPGID /**/
-/* HAS_GETPGRP:
- * This symbol, if defined, indicates that the getpgrp routine is
- * available to get the current process group.
- */
-/* USE_BSD_GETPGRP:
- * This symbol, if defined, indicates that getpgrp needs one
- * arguments whereas USG one needs none.
- */
-#$d_getpgrp HAS_GETPGRP /**/
-#$d_bsdgetpgrp USE_BSD_GETPGRP /**/
-
/* HAS_GETPGRP2:
* This symbol, if defined, indicates that the getpgrp2() (as in DG/UX)
* routine is available to get the current process group.
*/
#$d_setpgid HAS_SETPGID /**/
-/* HAS_SETPGRP:
- * This symbol, if defined, indicates that the setpgrp routine is
- * available to set the current process group.
- */
-/* USE_BSD_SETPGRP:
- * This symbol, if defined, indicates that setpgrp needs two
- * arguments whereas USG one needs none. See also HAS_SETPGID
- * for a POSIX interface.
- */
-#$d_setpgrp HAS_SETPGRP /**/
-#$d_bsdsetpgrp USE_BSD_SETPGRP /**/
-
/* HAS_SETPGRP2:
* This symbol, if defined, indicates that the setpgrp2() (as in DG/UX)
* routine is available to set the current process group.
* This macro surrounds its token with double quotes.
*/
#if $cpp_stuff == 1
-# define CAT2(a,b) a/**/b
-# define STRINGIFY(a) "a"
+#define CAT2(a,b) a/**/b
+#define STRINGIFY(a) "a"
/* If you can get stringification with catify, tell me how! */
#endif
#if $cpp_stuff == 42
-# define PeRl_CaTiFy(a, b) a ## b
-# define PeRl_StGiFy(a) #a
+#define PeRl_CaTiFy(a, b) a ## b
+#define PeRl_StGiFy(a) #a
/* the additional level of indirection enables these macros to be
* used as arguments to other macros. See K&R 2nd ed., page 231. */
-# define CAT2(a,b) PeRl_CaTiFy(a,b)
-# define StGiFy(a) PeRl_StGiFy(a)
-# define STRINGIFY(a) PeRl_StGiFy(a)
+#define CAT2(a,b) PeRl_CaTiFy(a,b)
+#define StGiFy(a) PeRl_StGiFy(a)
+#define STRINGIFY(a) PeRl_StGiFy(a)
#endif
#if $cpp_stuff != 1 && $cpp_stuff != 42
# include "Bletch: How does this C preprocessor catenate tokens?"
*/
#$d_setpent HAS_SETPROTOENT /**/
+/* HAS_SETPROCTITLE:
+ * This symbol, if defined, indicates that the setproctitle routine is
+ * available to set process title.
+ */
+#$d_setproctitle HAS_SETPROCTITLE /**/
+
/* HAS_SETPWENT:
* This symbol, if defined, indicates that the setpwent routine is
* available for initializing sequential access of the passwd database.
#$d_msg_proxy HAS_MSG_PROXY /**/
#$d_scm_rights HAS_SCM_RIGHTS /**/
+/* HAS_SOCKS5_INIT:
+ * This symbol, if defined, indicates that the socks5_init routine is
+ * available to initialize SOCKS 5.
+ */
+#$d_socks5_init HAS_SOCKS5_INIT /**/
+
/* HAS_SQRTL:
* This symbol, if defined, indicates that the sqrtl routine is
* available to do long double square roots.
* This symbol is defined if the FILE_cnt macro can be used as an
* lvalue.
*/
+/* STDIO_PTR_LVAL_SETS_CNT:
+ * This symbol is defined if using the FILE_ptr macro as an lvalue
+ * to increase the pointer by n has the side effect of decreasing the
+ * value of File_cnt(fp) by n.
+ */
+/* STDIO_PTR_LVAL_NOCHANGE_CNT:
+ * This symbol is defined if using the FILE_ptr macro as an lvalue
+ * to increase the pointer by n leaves File_cnt(fp) unchanged.
+ */
#$d_stdstdio USE_STDIO_PTR /**/
#ifdef USE_STDIO_PTR
#define FILE_ptr(fp) $stdio_ptr
#$d_stdio_ptr_lval STDIO_PTR_LVALUE /**/
#define FILE_cnt(fp) $stdio_cnt
#$d_stdio_cnt_lval STDIO_CNT_LVALUE /**/
+#$d_stdio_ptr_lval_sets_cnt STDIO_PTR_LVAL_SETS_CNT /**/
+#$d_stdio_ptr_lval_nochange_cnt STDIO_PTR_LVAL_NOCHANGE_CNT /**/
#endif
/* USE_STDIO_BASE:
*/
#$i_inttypes I_INTTYPES /**/
+/* I_LIBUTIL:
+ * This symbol, if defined, indicates that <libutil.h> exists and
+ * should be included.
+ */
+#$i_libutil I_LIBUTIL /**/
+
/* I_MACH_CTHREADS:
* This symbol, if defined, indicates to the C program that it should
* include <mach/cthreads.h>.
* This symbol, if defined, contains the string used by stdio to
* format long doubles (format 'g') for output.
*/
+/* PERL_PRIeldbl:
+ * This symbol, if defined, contains the string used by stdio to
+ * format long doubles (format 'e') for output.
+ */
+/* PERL_SCNfldbl:
+ * This symbol, if defined, contains the string used by stdio to
+ * format long doubles (format 'f') for input.
+ */
#$d_PRIfldbl PERL_PRIfldbl $sPRIfldbl /**/
#$d_PRIgldbl PERL_PRIgldbl $sPRIgldbl /**/
+#$d_PRIeldbl PERL_PRIeldbl $sPRIeldbl /**/
+#$d_SCNfldbl PERL_SCNfldbl $sSCNfldbl /**/
/* Off_t:
* This symbol holds the type used to declare offsets in the kernel.
*/
/* UVxf:
* This symbol defines the format string used for printing a Perl UV
- * as an unsigned hexadecimal integer.
+ * as an unsigned hexadecimal integer in lowercase abcdef.
+ */
+/* NVef:
+ * This symbol defines the format string used for printing a Perl NV
+ * using %e-ish floating point format.
+ */
+/* NVff:
+ * This symbol defines the format string used for printing a Perl NV
+ * using %f-ish floating point format.
+ */
+/* NVgf:
+ * This symbol defines the format string used for printing a Perl NV
+ * using %g-ish floating point format.
*/
#define IVdf $ivdformat /**/
#define UVuf $uvuformat /**/
#define UVof $uvoformat /**/
#define UVxf $uvxformat /**/
+#define NVef $nveformat /**/
+#define NVff $nvfformat /**/
+#define NVgf $nvgformat /**/
/* Pid_t:
* This symbol holds the type used to declare process ids in the kernel.
#define PERL_XS_APIVERSION "$xs_apiversion"
#define PERL_PM_APIVERSION "$pm_apiversion"
+/* HAS_GETPGRP:
+ * This symbol, if defined, indicates that the getpgrp routine is
+ * available to get the current process group.
+ */
+/* USE_BSD_GETPGRP:
+ * This symbol, if defined, indicates that getpgrp needs one
+ * arguments whereas USG one needs none.
+ */
+#$d_getpgrp HAS_GETPGRP /**/
+#$d_bsdgetpgrp USE_BSD_GETPGRP /**/
+
+/* HAS_SETPGRP:
+ * This symbol, if defined, indicates that the setpgrp routine is
+ * available to set the current process group.
+ */
+/* USE_BSD_SETPGRP:
+ * This symbol, if defined, indicates that setpgrp needs two
+ * arguments whereas USG one needs none. See also HAS_SETPGID
+ * for a POSIX interface.
+ */
+#$d_setpgrp HAS_SETPGRP /**/
+#$d_bsdsetpgrp USE_BSD_SETPGRP /**/
+
+/* FCNTL_CAN_LOCK:
+ * This symbol, if defined, indicates that fcntl() can be used
+ * for file locking. Normally on Unix systems this is defined.
+ * It may be undefined on VMS.
+ */
+#$d_fcntl_can_lock FCNTL_CAN_LOCK /**/
+
#endif
!GROK!THIS!
https://perl5.git.perl.org / perl5.git / blobdiff