# See Porting/pumpkin.pod for more information on metaconfig.
#
-# Generated on Sun Jan 23 10:14:12 CET 2011 [metaconfig 3.5 PL0]
+# Generated on Sun Jul 31 12:11:29 CEST 2011 [metaconfig 3.5 PL0]
# (with additional metaconfig patches by perlbug@perl.org)
cat >c1$$ <<EOF
spitshell=''
src=''
ssizetype=''
+st_ino_sign=''
+st_ino_size=''
startperl=''
startsh=''
stdchar=''
: Enable -DEBUGGING and -DDEBUGGING from the command line
EBUGGING=''
-DEBUGGING=old
+DEBUGGING=''
: set usethreads on the Configure command line to enable threads.
usereentrant='undef'
*) eval "$var=$val";;
esac'
-: Check is we will use socks
-case "$usesocks" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
-esac
-cat <<EOM
-
-Perl can be built to use the SOCKS proxy protocol library. To do so,
-Configure must be run with -Dusesocks. If you use SOCKS you also need
-to use the PerlIO abstraction layer, this will be implicitly selected.
-
-If this doesn't make any sense to you, just accept the default '$dflt'.
-EOM
-rp='Build Perl for SOCKS?'
-. ./myread
-case "$ans" in
-y|Y) val="$define" ;;
-*) val="$undef" ;;
-esac
-set usesocks
-eval $setvar
-
-case "$usesocks" in
-$define|true|[yY]*) useperlio="$define";;
-esac
-
-: Check if we want perlio
-case "$useperlio" in
-$define|true|[yY]*|'') dflt='y';;
-*) dflt='n';;
-esac
-cat <<EOM
-
-Previous version of $package used the standard IO mechanisms as
-defined in <stdio.h>. Versions 5.003_02 and later of $package allow
-alternate IO mechanisms via the PerlIO abstraction layer, but the
-stdio mechanism is still available if needed. The abstraction layer
-can use AT&T's sfio (if you already have sfio installed) or regular stdio.
-Using PerlIO with sfio may cause problems with some extension modules.
-
-If this doesn't make any sense to you, just accept the default '$dflt'.
-EOM
-rp='Use the PerlIO abstraction layer?'
-. ./myread
-case "$ans" in
-y|Y)
- val="$define"
- ;;
-*)
- echo "Ok, doing things the stdio way."
- val="$undef"
- ;;
-esac
-set useperlio
-eval $setvar
-
-case "$usesocks" in
-$define|true|[yY]*)
- case "$useperlio" in
- $define|true|[yY]*) ;;
- *) cat >&4 <<EOM
-
-You are using the SOCKS proxy protocol library which means that you
-should also use the PerlIO layer. You may be headed for trouble.
-
-EOM
- ;;
- esac
- ;;
-esac
-
: get the patchlevel
echo " "
echo "Getting the current patchlevel..." >&4
*) # Catch case where user specified ithreads or 5005threads but
# forgot -Dusethreads (A.D. 4/2002)
case "$useithreads$use5005threads" in
- *$define*)
- case "$useperlio" in
- "$define") dflt='y' ;;
- *) dflt='n' ;;
- esac
- ;;
- *) dflt='n';;
+ *$define*) dflt='y';;
+ *) dflt='n';;
esac
;;
esac
useithreads="$usethreads"
fi
-if test X"$usethreads" = "X$define" -a "X$useperlio" = "Xundef"; then
- cat >&4 <<EOF
-***
-*** To build with ithreads you must also use the PerlIO layer.
-*** Cannot continue, aborting.
-***
-EOF
- exit 1
-fi
-
case "$d_oldpthreads" in
'') : Configure tests would be welcome here. For now, assume undef.
val="$undef" ;;
'') firstmakefile='makefile';;
esac
+: Check is we will use socks
+case "$usesocks" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
+cat <<EOM
+
+Perl can be built to use the SOCKS proxy protocol library. To do so,
+Configure must be run with -Dusesocks. If you use SOCKS you also need
+to use the PerlIO abstraction layer, this will be implicitly selected.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+rp='Build Perl for SOCKS?'
+. ./myread
+case "$ans" in
+y|Y) val="$define" ;;
+*) val="$undef" ;;
+esac
+set usesocks
+eval $setvar
+
: Check for uselongdouble support
case "$ccflags" in
*-DUSE_LONG_DOUBLE*|*-DUSE_MORE_BITS*) uselongdouble="$define" ;;
esac
;;
esac
-case "$useperlio" in
-$define)
- echo "Perlio selected." >&4
- ;;
-*)
- echo "Perlio not selected, using stdio." >&4
- case "$archname" in
- *-stdio*) echo "...and architecture name already has -stdio." >&4
- ;;
- *) archname="$archname-stdio"
- echo "...setting architecture name to $archname." >&4
- ;;
- esac
- ;;
-esac
if $test -f archname.cbu; then
echo "Your platform has some specific hints for architecture name, using them..."
. ./archname.cbu
;;
esac
+: Check if we want perlio
+useperlio="$define"
+
: Set the vendorbin variables
case "$vendorprefix" in
'') d_vendorbin="$undef"
*) dflt='n';;
esac
echo "$package can use the sfio library, but it is experimental."
- case "$useperlio" in
- "$undef")
- echo "For sfio also the PerlIO abstraction layer is needed."
- echo "Earlier you said you wouldn't want that."
- ;;
- esac
rp="You seem to have sfio available, do you want to try using it?"
. ./myread
case "$ans" in
- y|Y) echo "Ok, turning on both sfio and PerlIO, then."
- useperlio="$define"
+ y|Y) echo "Ok, turning on sfio then."
val="$define"
;;
*) echo "Ok, avoiding sfio this time. I'll use stdio instead."
fi
$rm_try
+: Check the size of st_ino
+$echo " "
+$echo "Checking the size of st_ino..." >&4
+$cat > try.c <<EOCP
+#include <sys/stat.h>
+#include <stdio.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
+int main() {
+ struct stat st;
+ printf("%d\n", (int)sizeof(st.st_ino));
+ exit(0);
+}
+EOCP
+set try
+if eval $compile_ok; then
+ val=`$run ./try`
+ case "$val" in
+ '') st_ino_size=4
+ $echo "(I can't execute the test program--guessing $st_ino_size.)" >&4
+ ;;
+ *) st_ino_size=$val
+ $echo "Your st_ino is $st_ino_size bytes long."
+ ;;
+ esac
+else
+ st_ino_size=4
+ $echo "(I can't compile the test program--guessing $st_ino_size.)" >&4
+fi
+$rm_try
+
+: Check if st_ino is signed
+$echo " "
+$echo "Checking the sign of st_ino..." >&4
+$cat > try.c <<EOCP
+#include <sys/stat.h>
+#include <stdio.h>
+int main() {
+ struct stat foo;
+ foo.st_ino = -1;
+ if (foo.st_ino < 0)
+ printf("-1\n");
+ else
+ printf("1\n");
+}
+EOCP
+set try
+if eval $compile; then
+ val=`$run ./try`
+ case "$val" in
+ '') st_ino_sign=1
+ $echo "(I can't execute the test program--guessing unsigned.)" >&4
+ ;;
+ *) st_ino_sign=$val
+ case "$st_ino_sign" in
+ 1) $echo "Your st_ino is unsigned." ;;
+ -1) $echo "Your st_ino is signed." ;;
+ esac
+ ;;
+ esac
+else
+ st_ino_sign=1
+ $echo "(I can't compile the test program--guessing unsigned.)" >&4
+fi
+$rm_try
+
: see what type of char stdio uses.
echo " "
echo '#include <stdio.h>' | $cppstdin $cppminus > stdioh
srandom_r_proto='$srandom_r_proto'
src='$src'
ssizetype='$ssizetype'
+st_ino_sign='$st_ino_sign'
+st_ino_size='$st_ino_size'
startperl='$startperl'
startsh='$startsh'
static_ext='$static_ext'
$sed -n 's/^\([a-zA-Z_0-9]*\)=.*/\1/p' \
config.sh config.sh UU/oldconfig.sh |\
$sort | $uniq -u >UU/oldsyms
- set X `cat UU/oldsyms`
+ set X `$cat UU/oldsyms`
shift
case $# in
0) ;;
*)
- cat <<EOM
+ $cat <<EOM
Hmm...You had some extra variables I don't know about...I'll try to keep 'em...
EOM
echo ": Variables propagated from previous config.sh file." >>config.sh
- for sym in `cat UU/oldsyms`; do
+ for sym in `$cat UU/oldsyms`; do
echo " Propagating $hint variable "'$'"$sym..."
eval 'tmp="$'"${sym}"'"'
echo "$tmp" | \
https://perl5.git.perl.org / perl5.git / blobdiff